* Re: HFSC classes going out of bounds, regression in recent kernels?
From: Patrick McHardy @ 2010-04-06 15:37 UTC (permalink / raw)
To: Denys Fedorysychenko; +Cc: netdev, Jeff Garzik, Eric Dumazet
In-Reply-To: <201004061822.21735.nuclearcat@nuclearcat.com>
[-- Attachment #1: Type: text/plain, Size: 593 bytes --]
Denys Fedorysychenko wrote:
> I notice on one of my QoS machines that HFSC start going out of bandwidth
> limits. The most terrible thing - it happens suddenly, and if i just relaunch
> QoS script - everything will work fine.
That sounds like there's an overflow somewhere.
> I'm not sure it is not my mistake, but most probably it is a bug.
> I can't tell for sure when it is happened, last kernel was on this machine
> 2.6.28 i guess, or maybe even older.
Looking through the recent patches in this area, my prime suspect
is the attached patch. Does reverting it make any difference?
[-- Attachment #2: x --]
[-- Type: text/plain, Size: 1726 bytes --]
commit a4a710c4a7490587406462bf1d54504b7783d7d7
Author: Jarek Poplawski <jarkao2@gmail.com>
Date: Mon Jun 8 22:05:13 2009 +0000
pkt_sched: Change PSCHED_SHIFT from 10 to 6
Change PSCHED_SHIFT from 10 to 6 to increase schedulers time
resolution. This will increase 16x a number of (internal) ticks per
nanosecond, and is needed to improve accuracy of schedulers based on
rate tables, like HTB, TBF or CBQ, with rates above 100Mbit. It is
assumed this change is safe for 32bit accounting of time diffs up
to 2 minutes, which should be enough for common use (extremely low
rate values may overflow, so get inaccurate instead). To make full
use of this change an updated iproute2 will be needed. (But using
older iproute2 should be safe too.)
This change breaks ticks - microseconds similarity, so some minor code
fixes might be needed. It is also planned to change naming adequately
eg. to PSCHED_TICKS2NS() etc. in the near future.
Reported-by: Antonio Almeida <vexwek@gmail.com>
Tested-by: Antonio Almeida <vexwek@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index cd0e026..120935b 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -41,8 +41,8 @@ static inline void *qdisc_priv(struct Qdisc *q)
typedef u64 psched_time_t;
typedef long psched_tdiff_t;
-/* Avoid doing 64 bit divide by 1000 */
-#define PSCHED_SHIFT 10
+/* Avoid doing 64 bit divide */
+#define PSCHED_SHIFT 6
#define PSCHED_US2NS(x) ((s64)(x) << PSCHED_SHIFT)
#define PSCHED_NS2US(x) ((x) >> PSCHED_SHIFT)
^ permalink raw reply related
* [RFC][PATCH] ipmr: Fix struct mfcctl to be independent of MAXVIFS v2
From: Eric W. Biederman @ 2010-04-06 15:38 UTC (permalink / raw)
To: netdev; +Cc: David S. Miller, Eric Dumazet, Patrick McHardy, Ilia K, Tom Goff
In-Reply-To: <m1mxxgbwtl.fsf@fess.ebiederm.org>
Right now if you recompile the kernel increasing MAXVIFS
to support more VIFS users of the MRT_ADD_VIF and MRT_DEL_VIF
will break because the ABI changed.
My goal is an API that works with just a recompile of existing
applications, and an ABI that continues to work for old
applications.
The unused/dead fields at the end of struct mfcctl make this
exercise more difficult than it should be.
- Rename the existing struct mfcctl mfcctl_old.
- Define a new and larger struct mfcctl that we can detect
by size.
The new and larger struct mfcctl won't have trailing garbage
fields so we can accept anything of that size or larger,
and simply ignore the entries that are above MAXVIFS.
My new struct mfcctl is now 128 bytes which is noticeable on
the stack but should still be small enough not to cause problems.
v2: Rework the support larger arrays so that most/all? existing
applications can simply be recompiled and work with a larger
maximum number of VIFS.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
include/linux/mroute.h | 20 +++++++++++++++-----
net/ipv4/ipmr.c | 17 ++++++++++++++---
2 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index c5f3d53..6dbdebf 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -76,15 +76,25 @@ struct vifctl {
* Cache manipulation structures for mrouted and PIMd
*/
+struct mfcctl_old {
+#define MFCCTL_OLD_VIFS 32
+ struct in_addr mfcc_origin; /* Origin of mcast */
+ struct in_addr mfcc_mcastgrp; /* Group in question */
+ vifi_t mfcc_parent; /* Where it arrived */
+ unsigned char mfcc_ttls[MFCCTL_OLD_VIFS]; /* Where it is going */
+ unsigned int mfcc_pkt_cnt; /* dead */
+ unsigned int mfcc_byte_cnt; /* dead */
+ unsigned int mfcc_wrong_if; /* dead */
+ int mfcc_expire; /* dead */
+};
+
struct mfcctl {
+#define MFCCTL_VIFS 118
struct in_addr mfcc_origin; /* Origin of mcast */
struct in_addr mfcc_mcastgrp; /* Group in question */
vifi_t mfcc_parent; /* Where it arrived */
- unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */
- unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */
- unsigned int mfcc_byte_cnt;
- unsigned int mfcc_wrong_if;
- int mfcc_expire;
+ unsigned char mfcc_ttls[MFCCTL_VIFS]; /* Where it is going */
+ /* Don't put anything here as mfcc_ttls should grow into here */
};
/*
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 0b9d03c..516289b 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1012,10 +1012,18 @@ int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsi
*/
case MRT_ADD_MFC:
case MRT_DEL_MFC:
- if (optlen != sizeof(mfc))
+
+ if (optlen == sizeof(struct mfcctl_old)) {
+ if (copy_from_user(&mfc, optval, sizeof(struct mfcctl_old)))
+ return -EFAULT;
+ memset(mfc.mfcc_ttls + MFCCTL_OLD_VIFS, 255,
+ MFCCTL_VIFS - MFCCTL_OLD_VIFS);
+ } else if (optlen >= (sizeof(struct mfcctl))) {
+ if (copy_from_user(&mfc, optval, sizeof(mfc)))
+ return -EFAULT;
+ } else
return -EINVAL;
- if (copy_from_user(&mfc, optval, sizeof(mfc)))
- return -EFAULT;
+
rtnl_lock();
if (optname == MRT_DEL_MFC)
ret = ipmr_mfc_delete(net, &mfc);
@@ -2032,6 +2040,9 @@ int __init ip_mr_init(void)
{
int err;
+ BUILD_BUG_ON(MFCCTL_VIFS < MAXVIFS);
+ BUILD_BUG_ON(sizeof(struct mfcctl) <= sizeof(struct mfcctl_old));
+
mrt_cachep = kmem_cache_create("ip_mrt_cache",
sizeof(struct mfc_cache),
0, SLAB_HWCACHE_ALIGN|SLAB_PANIC,
--
1.6.5.2.143.g8cc62
^ permalink raw reply related
* [PATCH] socket: remove duplicate declaration of struct timespec
From: Hagen Paul Pfeifer @ 2010-04-06 15:39 UTC (permalink / raw)
To: netdev; +Cc: davem, Hagen Paul Pfeifer
struct timespec ts was alreay defined. Reuse the previously
defined one and reduce the memory footprint on the stack by
16 bytes.
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
---
net/socket.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/net/socket.c b/net/socket.c
index 769c386..ae904b5 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -619,10 +619,9 @@ void __sock_recv_timestamp(struct msghdr *msg, struct sock *sk,
put_cmsg(msg, SOL_SOCKET, SCM_TIMESTAMP,
sizeof(tv), &tv);
} else {
- struct timespec ts;
- skb_get_timestampns(skb, &ts);
+ skb_get_timestampns(skb, &ts[0]);
put_cmsg(msg, SOL_SOCKET, SCM_TIMESTAMPNS,
- sizeof(ts), &ts);
+ sizeof(ts[0]), &ts[0]);
}
}
--
1.6.6.196.g1f735.dirty
^ permalink raw reply related
* Re: HFSC classes going out of bounds, regression in recent kernels?
From: Denys Fedorysychenko @ 2010-04-06 15:45 UTC (permalink / raw)
To: Patrick McHardy; +Cc: netdev, Jeff Garzik, Eric Dumazet
In-Reply-To: <4BBB5543.40607@trash.net>
On Tuesday 06 April 2010 18:37:39 Patrick McHardy wrote:
> Denys Fedorysychenko wrote:
> > I notice on one of my QoS machines that HFSC start going out of bandwidth
> > limits. The most terrible thing - it happens suddenly, and if i just
> > relaunch QoS script - everything will work fine.
>
> That sounds like there's an overflow somewhere.
>
> > I'm not sure it is not my mistake, but most probably it is a bug.
> > I can't tell for sure when it is happened, last kernel was on this
> > machine 2.6.28 i guess, or maybe even older.
>
> Looking through the recent patches in this area, my prime suspect
> is the attached patch. Does reverting it make any difference?
>
I will try to upgrade soon, it is critical router, so probably i will do this
tonight.
I guess with reverting this patch also it will hurt shaper resolution on high
speeds... not a case for me, but for other people.
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: John Linn @ 2010-04-06 16:12 UTC (permalink / raw)
To: Eric Dumazet
Cc: netdev, linuxppc-dev, grant.likely, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <1270502993.9013.36.camel@edumazet-laptop>
> -----Original Message-----
> From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> Sent: Monday, April 05, 2010 3:30 PM
> To: John Linn
> Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
> jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>
> Le lundi 05 avril 2010 à 15:11 -0600, John Linn a écrit :
> > This patch adds support for using the LL TEMAC Ethernet driver on
> > non-Virtex 5 platforms by adding support for accessing the Soft DMA
> > registers as if they were memory mapped instead of solely through the
> > DCR's (available on the Virtex 5).
> >
> > The patch also updates the driver so that it runs on the MicroBlaze.
> > The changes were tested on the PowerPC 440, PowerPC 405, and the
> > MicroBlaze platforms.
> >
> > Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
> > Signed-off-by: John Linn <john.linn@xilinx.com>
> >
> > ---
>
> > +/* Align the IP data in the packet on word boundaries as MicroBlaze
> > + * needs it.
> > + */
> > +
> > #define XTE_ALIGN 32
> > -#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
> > +#define BUFFER_ALIGN(adr) ((34 - ((u32) adr)) % XTE_ALIGN)
> >
>
> Very interesting way of doing this, but why such convoluted thing ?
This is trying to align for a cache line (32 bytes) before my change.
My change was then also making it align the IP data on a word boundary.
>
> Because of the % 32, this is equivalent to :
>
> #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
>
Yes, but I'm not sure that's clearer IMHO.
> But wait, dont we recognise the magic constant NET_IP_ALIGN ?
Yes it could be used. I'm struggling with how to make this all be clearer.
How about this?
#define BUFFER_ALIGN(adr) (((XTE_ALIGN + NET_IP_ALIGN) - ((u32) adr)) % XTE_ALIGN)
>
> So, I ask, cant you use netdev_alloc_skb_ip_align() in this driver ?
From what I can tell, this wouldn't work as it only reserves the 2 bytes to align with
a word boundary.
Thanks,
John
>
>
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
^ permalink raw reply
* Re: [PATCH 5/5] netfilter: xt_TEE: have cloned packet travel through Xtables too
From: Jan Engelhardt @ 2010-04-06 16:14 UTC (permalink / raw)
To: Patrick McHardy; +Cc: netfilter-devel, netdev
In-Reply-To: <4BB49E10.8080608@trash.net>
On Thursday 2010-04-01 15:22, Patrick McHardy wrote:
>> Or should we be using skb_alloc and copying the data portion over, like
>> ipt_REJECT does since v2.6.24-2931-g9ba99b0?
>
>I guess pskb_copy() would be most optimal since we can modify
>the header, but the non-linear area could be shared
Trying to improve my understanding: when doing skb_pull,
does the skb->head that is relevant for pskb_copy move?
^ permalink raw reply
* Re: [PATCH 5/5] netfilter: xt_TEE: have cloned packet travel through Xtables too
From: Patrick McHardy @ 2010-04-06 16:37 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: netfilter-devel, netdev
In-Reply-To: <alpine.LSU.2.01.1004061814120.13186@obet.zrqbmnf.qr>
Jan Engelhardt wrote:
> On Thursday 2010-04-01 15:22, Patrick McHardy wrote:
>>> Or should we be using skb_alloc and copying the data portion over, like
>>> ipt_REJECT does since v2.6.24-2931-g9ba99b0?
>> I guess pskb_copy() would be most optimal since we can modify
>> the header, but the non-linear area could be shared
>
> Trying to improve my understanding: when doing skb_pull,
> does the skb->head that is relevant for pskb_copy move?
skb_pull() only changes skb->data.
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: Eric Dumazet @ 2010-04-06 17:00 UTC (permalink / raw)
To: John Linn
Cc: netdev, linuxppc-dev, grant.likely, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <2fefb2a2-d0dc-461d-ac8c-3e7d177b7cf8@VA3EHSMHS032.ehs.local>
Le mardi 06 avril 2010 à 10:12 -0600, John Linn a écrit :
> > -----Original Message-----
> > From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> > Sent: Monday, April 05, 2010 3:30 PM
> > To: John Linn
> > Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
> > jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> > Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
> >
> > Le lundi 05 avril 2010 à 15:11 -0600, John Linn a écrit :
> > > This patch adds support for using the LL TEMAC Ethernet driver on
> > > non-Virtex 5 platforms by adding support for accessing the Soft DMA
> > > registers as if they were memory mapped instead of solely through the
> > > DCR's (available on the Virtex 5).
> > >
> > > The patch also updates the driver so that it runs on the MicroBlaze.
> > > The changes were tested on the PowerPC 440, PowerPC 405, and the
> > > MicroBlaze platforms.
> > >
> > > Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
> > > Signed-off-by: John Linn <john.linn@xilinx.com>
> > >
> > > ---
> >
> > > +/* Align the IP data in the packet on word boundaries as MicroBlaze
> > > + * needs it.
> > > + */
> > > +
> > > #define XTE_ALIGN 32
> > > -#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
> > > +#define BUFFER_ALIGN(adr) ((34 - ((u32) adr)) % XTE_ALIGN)
> > >
> >
> > Very interesting way of doing this, but why such convoluted thing ?
>
> This is trying to align for a cache line (32 bytes) before my change.
>
> My change was then also making it align the IP data on a word boundary.
>
> >
> > Because of the % 32, this is equivalent to :
> >
> > #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
> >
>
> Yes, but I'm not sure that's clearer IMHO.
>
> > But wait, dont we recognise the magic constant NET_IP_ALIGN ?
>
> Yes it could be used. I'm struggling with how to make this all be clearer.
>
I am not saying its clearer, I am saying we have a standard way to
handle this exact problem (aligning rcvs buffer so that IP header is
aligned)
There is no need to invent new ones, this makes reviewing of this driver
more difficult.
> How about this?
> #define BUFFER_ALIGN(adr) (((XTE_ALIGN + NET_IP_ALIGN) - ((u32) adr)) % XTE_ALIGN)
>
Sorry, I still dont understand why you need XTE_ALIGN + ...
((A + B) - C) % A is equal to (B - C) % A
Which one is more readable ?
Please take a look at existing and clean code, no magic macro, and we
can understand the intention.
find drivers/net | xargs grep -n netdev_alloc_skb_ip_align
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: John Linn @ 2010-04-06 17:11 UTC (permalink / raw)
To: Eric Dumazet
Cc: netdev, linuxppc-dev, grant.likely, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <1270573233.2081.47.camel@edumazet-laptop>
> -----Original Message-----
> From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> Sent: Tuesday, April 06, 2010 11:01 AM
> To: John Linn
> Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
> jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> Subject: RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>
> Le mardi 06 avril 2010 à 10:12 -0600, John Linn a écrit :
> > > -----Original Message-----
> > > From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> > > Sent: Monday, April 05, 2010 3:30 PM
> > > To: John Linn
> > > Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
> > > jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> > > Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
> > >
> > > Le lundi 05 avril 2010 à 15:11 -0600, John Linn a écrit :
> > > > This patch adds support for using the LL TEMAC Ethernet driver on
> > > > non-Virtex 5 platforms by adding support for accessing the Soft DMA
> > > > registers as if they were memory mapped instead of solely through the
> > > > DCR's (available on the Virtex 5).
> > > >
> > > > The patch also updates the driver so that it runs on the MicroBlaze.
> > > > The changes were tested on the PowerPC 440, PowerPC 405, and the
> > > > MicroBlaze platforms.
> > > >
> > > > Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
> > > > Signed-off-by: John Linn <john.linn@xilinx.com>
> > > >
> > > > ---
> > >
> > > > +/* Align the IP data in the packet on word boundaries as MicroBlaze
> > > > + * needs it.
> > > > + */
> > > > +
> > > > #define XTE_ALIGN 32
> > > > -#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
> > > > +#define BUFFER_ALIGN(adr) ((34 - ((u32) adr)) % XTE_ALIGN)
> > > >
> > >
> > > Very interesting way of doing this, but why such convoluted thing ?
> >
> > This is trying to align for a cache line (32 bytes) before my change.
> >
> > My change was then also making it align the IP data on a word boundary.
> >
> > >
> > > Because of the % 32, this is equivalent to :
> > >
> > > #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
> > >
> >
> > Yes, but I'm not sure that's clearer IMHO.
> >
> > > But wait, dont we recognise the magic constant NET_IP_ALIGN ?
> >
> > Yes it could be used. I'm struggling with how to make this all be clearer.
> >
>
> I am not saying its clearer, I am saying we have a standard way to
> handle this exact problem (aligning rcvs buffer so that IP header is
> aligned)
>
> There is no need to invent new ones, this makes reviewing of this driver
> more difficult.
>
>
> > How about this?
> > #define BUFFER_ALIGN(adr) (((XTE_ALIGN + NET_IP_ALIGN) - ((u32) adr)) % XTE_ALIGN)
> >
>
> Sorry, I still dont understand why you need XTE_ALIGN + ...
>
> ((A + B) - C) % A is equal to (B - C) % A
>
> Which one is more readable ?
I'm fine with your suggestion.
#define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
>
> Please take a look at existing and clean code, no magic macro, and we
> can understand the intention.
>
> find drivers/net | xargs grep -n netdev_alloc_skb_ip_align
>
>
Yes I see how it's used, but it only allows you to reserve 2 bytes in the skb with no options.
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
^ permalink raw reply
* Re: [RFC][PATCH] ipmr: Fix struct mfcctl to be independent of MAXVIFS v2
From: Eric W. Biederman @ 2010-04-06 17:23 UTC (permalink / raw)
To: Ben Greear
Cc: netdev, David S. Miller, Eric Dumazet, Patrick McHardy, Ilia K,
Tom Goff
In-Reply-To: <4BBB67FE.6020209@candelatech.com>
Ben Greear <greearb@candelatech.com> writes:
> On 04/06/2010 08:38 AM, Eric W. Biederman wrote:
>>
>> Right now if you recompile the kernel increasing MAXVIFS
>> to support more VIFS users of the MRT_ADD_VIF and MRT_DEL_VIF
>> will break because the ABI changed.
>>
>> My goal is an API that works with just a recompile of existing
>> applications, and an ABI that continues to work for old
>> applications.
>>
>> The unused/dead fields at the end of struct mfcctl make this
>> exercise more difficult than it should be.
>>
>> - Rename the existing struct mfcctl mfcctl_old.
>> - Define a new and larger struct mfcctl that we can detect
>> by size.
>>
>> The new and larger struct mfcctl won't have trailing garbage
>> fields so we can accept anything of that size or larger,
>> and simply ignore the entries that are above MAXVIFS.
>>
>> My new struct mfcctl is now 128 bytes which is noticeable on
>> the stack but should still be small enough not to cause problems.
>>
>> v2: Rework the support larger arrays so that most/all? existing
>> applications can simply be recompiled and work with a larger
>> maximum number of VIFS.
>
> If we're going to change the ABI, can we not support an arbitrary
> number of VIFS instead of just a larger fixed maximum?
The ABI as I have specified should work for any larger structure than
I have specified. But like select many applications will limit themselves
to use the definition of struct mfcctl that is passed to them.
Eric
^ permalink raw reply
* e1000 TX unit hang and a possibly kernel oops
From: Breno Leitao @ 2010-04-06 17:23 UTC (permalink / raw)
To: e1000-devel@lists.sourceforge.net, netdev; +Cc: kamaleshb
Hi,
During a test workload on kernel 2.6.27.19-5-ppc64 (SLES11), we are facing
a "TX Unit Hang" issue, and then a kernel oops.
We also tried the same workload with the sourceforge device driver and the
problem is also reproducible. When TSO is off, the problem don't appear on
both driver.
I am not sure if the TX hang issue could be related to oops that happen in the
virtual memory subsystem, that is why I decided to ask you guys.
Thanks,
Mar 17 02:34:34 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 02:34:34 c862f3sq03 kernel: Tx Queue <0>
Mar 17 02:34:34 c862f3sq03 kernel: TDH <d6>
Mar 17 02:34:34 c862f3sq03 kernel: TDT <d1>
Mar 17 02:34:34 c862f3sq03 kernel: next_to_use <d1>
Mar 17 02:34:34 c862f3sq03 kernel: next_to_clean <d5>
Mar 17 02:34:34 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 02:34:34 c862f3sq03 kernel: time_stamp <10053bc21>
Mar 17 02:34:34 c862f3sq03 kernel: next_to_watch <da>
Mar 17 02:34:34 c862f3sq03 kernel: jiffies <10053bcbc>
Mar 17 02:34:34 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 02:34:36 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 02:34:36 c862f3sq03 kernel: Tx Queue <0>
Mar 17 02:34:36 c862f3sq03 kernel: TDH <d6>
Mar 17 02:34:36 c862f3sq03 kernel: TDT <d1>
Mar 17 02:34:36 c862f3sq03 kernel: next_to_use <d1>
Mar 17 02:34:36 c862f3sq03 kernel: next_to_clean <d5>
Mar 17 02:34:36 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 02:34:36 c862f3sq03 kernel: time_stamp <10053bc21>
Mar 17 02:34:36 c862f3sq03 kernel: next_to_watch <da>
Mar 17 02:34:36 c862f3sq03 kernel: jiffies <10053bd84>
Mar 17 02:34:36 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 02:34:38 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 02:34:38 c862f3sq03 kernel: Tx Queue <0>
Mar 17 02:34:38 c862f3sq03 kernel: TDH <d6>
Mar 17 02:34:38 c862f3sq03 kernel: TDT <d1>
Mar 17 02:34:38 c862f3sq03 kernel: next_to_use <d1>
Mar 17 02:34:38 c862f3sq03 kernel: next_to_clean <d5>
Mar 17 02:34:38 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 02:34:38 c862f3sq03 kernel: time_stamp <10053bc21>
Mar 17 02:34:38 c862f3sq03 kernel: next_to_watch <da>
Mar 17 02:34:38 c862f3sq03 kernel: jiffies <10053be4c>
Mar 17 02:34:38 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 02:34:40 c862f3sq03 kernel: ------------[ cut here ]------------
Mar 17 02:34:40 c862f3sq03 kernel: Badness at net/sched/sch_generic.c:219
Mar 17 02:34:40 c862f3sq03 kernel: NIP: c000000000498eac LR: c000000000498d8c CTR: 0000000000000001
Mar 17 02:34:40 c862f3sq03 kernel: REGS: c00000000f68fa80 TRAP: 0700 Tainted: G (2.6.27.19-5-ppc64)
Mar 17 02:34:40 c862f3sq03 kernel: MSR: 8000000000029032 <EE,ME,IR,DR> CR: 88000022 XER: 00000010
Mar 17 02:34:40 c862f3sq03 kernel: TASK = c000000000918340[0] 'swapper' THREAD: c0000000009d0000 CPU: 0
Mar 17 02:34:40 c862f3sq03 kernel: GPR00: 0000000000000000 c00000000f68fd00 c0000000009cbc80 0000000000000080
Mar 17 02:34:40 c862f3sq03 kernel: GPR04: 0000000000000000 c000000000498ce4 c0000000009bb550 c0000003be260980
Mar 17 02:34:40 c862f3sq03 kernel: GPR08: 0000000000000002 c000000000c91e68 0000000000000080 ffffffffffffff01
Mar 17 02:34:40 c862f3sq03 kernel: GPR12: 0000000000000000 c000000000a92c80 0000000000051bc3 0000000000051aa1
Mar 17 02:34:40 c862f3sq03 kernel: GPR16: 0000000000051bbb c000000000a51280 0000000000000000 0000000000000000
Mar 17 02:34:40 c862f3sq03 kernel: GPR20: c000000000bda198 c000000000bda598 c000000000bda998 0000000000000002
Mar 17 02:34:40 c862f3sq03 kernel: GPR24: ffffffffffffffff 0000000000000000 0000000000000000 0000000000000000
Mar 17 02:34:40 c862f3sq03 kernel: GPR28: c0000003be2c9400 0000000000000001 c000000000961118 c0000003be260980
Mar 17 02:34:40 c862f3sq03 kernel: NIP [c000000000498eac] .dev_watchdog+0x190/0x2cc
Mar 17 02:34:40 c862f3sq03 kernel: LR [c000000000498d8c] .dev_watchdog+0x70/0x2cc
Mar 17 02:34:40 c862f3sq03 kernel: Call Trace:
Mar 17 02:34:40 c862f3sq03 kernel: [c00000000f68fd00] [c000000000498d8c] .dev_watchdog+0x70/0x2cc (unreliable)
Mar 17 02:34:40 c862f3sq03 kernel: [c00000000f68fdc0] [c00000000009cec4] .run_timer_softirq+0x1e8/0x2c4
Mar 17 02:34:40 c862f3sq03 kernel: [c00000000f68fec0] [c00000000009705c] .__do_softirq+0x13c/0x284
Mar 17 02:34:40 c862f3sq03 kernel: [c00000000f68ff90] [c00000000002ab4c] .call_do_softirq+0x14/0x24
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3880] [c00000000000db5c] .do_softirq+0x88/0xf0
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3920] [c000000000096e38] .irq_exit+0x5c/0xb4
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d39a0] [c000000000027c1c] .timer_interrupt+0xd8/0x104
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3a30] [c000000000003718] decrementer_common+0x118/0x180
Mar 17 02:34:40 c862f3sq03 kernel: --- Exception: 901 at .pseries_dedicated_idle_sleep+0xf0/0x1b8
Mar 17 02:34:40 c862f3sq03 kernel: LR = .pseries_dedicated_idle_sleep+0xe0/0x1b8
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3d20] [c0000000000501b8] .pseries_dedicated_idle_sleep+0x80/0x1b8 (unreliable)
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3dd0] [c000000000013114] .cpu_idle+0xfc/0x1a4
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3e60] [c00000000051b124] .rest_init+0x7c/0x94
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3ee0] [c000000000760d18] .start_kernel+0x52c/0x554
Mar 17 02:34:40 c862f3sq03 kernel: [c0000000009d3f90] [c000000000008568] .start_here_common+0x3c/0x54
Mar 17 02:34:40 c862f3sq03 kernel: Instruction dump:
Mar 17 02:34:40 c862f3sq03 kernel: 48000064 e97e8018 e81c0330 e93c033a 7d290214 e80b0000 7d604851 40800048
Mar 17 02:34:40 c862f3sq03 kernel: e93e8028 80090000 2f800000 40fe0014 <0fe00000> 38000001 e93e8028 90090000
Mar 17 02:34:40 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 02:34:40 c862f3sq03 kernel: Tx Queue <0>
Mar 17 02:34:40 c862f3sq03 kernel: TDH <d6>
Mar 17 02:34:40 c862f3sq03 kernel: TDT <d1>
Mar 17 02:34:40 c862f3sq03 kernel: next_to_use <d1>
Mar 17 02:34:40 c862f3sq03 kernel: next_to_clean <d5>
Mar 17 02:34:40 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 02:34:40 c862f3sq03 kernel: time_stamp <10053bc21>
Mar 17 02:34:40 c862f3sq03 kernel: next_to_watch <da>
Mar 17 02:34:40 c862f3sq03 kernel: jiffies <10053bf14>
Mar 17 02:34:40 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 02:34:44 c862f3sq03 kernel: e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
--snip--
Mar 17 15:31:05 c862f3sq04 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 15:31:05 c862f3sq04 kernel: Tx Queue <0>
Mar 17 15:31:05 c862f3sq04 kernel: TDH <98>
Mar 17 15:31:05 c862f3sq04 kernel: TDT <93>
Mar 17 15:31:05 c862f3sq04 kernel: next_to_use <93>
Mar 17 15:31:05 c862f3sq04 kernel: next_to_clean <97>
Mar 17 15:31:05 c862f3sq04 kernel: buffer_info[next_to_clean]
Mar 17 15:31:05 c862f3sq04 kernel: time_stamp <10080baf1>
Mar 17 15:31:05 c862f3sq04 kernel: next_to_watch <9a>
Mar 17 15:31:05 c862f3sq04 kernel: jiffies <10080bca8>
Mar 17 15:31:05 c862f3sq04 kernel: next_to_watch.status <0>
Mar 17 15:31:06 c862f3sq04 kernel: ------------[ cut here ]------------
Mar 17 15:31:06 c862f3sq04 kernel: Badness at net/sched/sch_generic.c:219
Mar 17 15:31:06 c862f3sq04 kernel: NIP: c000000000498eac LR: c000000000498d8c CTR: 0000000000000001
Mar 17 15:31:06 c862f3sq04 kernel: REGS: c00000000f68fa80 TRAP: 0700 Tainted: G (2.6.27.19-5-ppc64)
Mar 17 15:31:06 c862f3sq04 kernel: MSR: 8000000000029032 <EE,ME,IR,DR> CR: 88000022 XER: 00000010
Mar 17 15:31:06 c862f3sq04 kernel: TASK = c000000000918340[0] 'swapper' THREAD: c0000000009d0000 CPU: 0
Mar 17 15:31:06 c862f3sq04 kernel: GPR00: 0000000000000000 c00000000f68fd00 c0000000009cbc80 0000000000000080
Mar 17 15:31:06 c862f3sq04 kernel: GPR04: 0000000000000000 c000000000498ce4 c0000000009bb550 c0000001dcf6d180
Mar 17 15:31:06 c862f3sq04 kernel: GPR08: 0000000000000002 c000000000c91e68 0000000000000080 ffffffffffffffd9
Mar 17 15:31:06 c862f3sq04 kernel: GPR12: 0000000000000000 c000000000a92c80 0000000000051bc3 0000000000051aa1
Mar 17 15:31:06 c862f3sq04 kernel: GPR16: 0000000000051bbb c000000000a51280 0000000000000000 0000000000000000
Mar 17 15:31:06 c862f3sq04 kernel: GPR20: c000000000bda198 c000000000bda598 c000000000bda998 0000000000000002
Mar 17 15:31:06 c862f3sq04 kernel: GPR24: ffffffffffffffff 0000000000000000 0000000000000000 0000000000000000
Mar 17 15:31:06 c862f3sq04 kernel: GPR28: c0000001dcb60380 0000000000000001 c000000000961118 c0000001dcf6d180
Mar 17 15:31:06 c862f3sq04 kernel: NIP [c000000000498eac] .dev_watchdog+0x190/0x2cc
Mar 17 15:31:06 c862f3sq04 kernel: LR [c000000000498d8c] .dev_watchdog+0x70/0x2cc
Mar 17 15:31:06 c862f3sq04 kernel: Call Trace:
Mar 17 15:31:06 c862f3sq04 kernel: [c00000000f68fd00] [c000000000498d8c] .dev_watchdog+0x70/0x2cc (unreliable)
Mar 17 15:31:06 c862f3sq04 kernel: [c00000000f68fdc0] [c00000000009cec4] .run_timer_softirq+0x1e8/0x2c4
Mar 17 15:31:06 c862f3sq04 kernel: [c00000000f68fec0] [c00000000009705c] .__do_softirq+0x13c/0x284
Mar 17 15:31:06 c862f3sq04 kernel: [c00000000f68ff90] [c00000000002ab4c] .call_do_softirq+0x14/0x24
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3880] [c00000000000db5c] .do_softirq+0x88/0xf0
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3920] [c000000000096e38] .irq_exit+0x5c/0xb4
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d39a0] [c000000000027c1c] .timer_interrupt+0xd8/0x104
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3a30] [c000000000003718] decrementer_common+0x118/0x180
Mar 17 15:31:06 c862f3sq04 kernel: --- Exception: 901 at .pseries_dedicated_idle_sleep+0xe8/0x1b8
Mar 17 15:31:06 c862f3sq04 kernel: LR = .pseries_dedicated_idle_sleep+0xe0/0x1b8
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3d20] [c0000000000501b8] .pseries_dedicated_idle_sleep+0x80/0x1b8 (unreliable)
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3dd0] [c000000000013114] .cpu_idle+0xfc/0x1a4
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3e60] [c00000000051b124] .rest_init+0x7c/0x94
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3ee0] [c000000000760d18] .start_kernel+0x52c/0x554
Mar 17 15:31:06 c862f3sq04 kernel: [c0000000009d3f90] [c000000000008568] .start_here_common+0x3c/0x54
Mar 17 15:31:06 c862f3sq04 kernel: Instruction dump:
Mar 17 15:31:06 c862f3sq04 kernel: 48000064 e97e8018 e81c0330 e93c033a 7d290214 e80b0000 7d604851 40800048
Mar 17 15:31:06 c862f3sq04 kernel: e93e8028 80090000 2f800000 40fe0014 <0fe00000> 38000001 e93e8028 90090000
Mar 17 15:31:09 c862f3sq04 kernel: e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
--snip--
Mar 17 15:59:54 c862f3sq02 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 15:59:54 c862f3sq02 kernel: Tx Queue <0>
Mar 17 15:59:54 c862f3sq02 kernel: TDH <3d>
Mar 17 15:59:54 c862f3sq02 kernel: TDT <1f>
Mar 17 15:59:54 c862f3sq02 kernel: next_to_use <1f>
Mar 17 15:59:54 c862f3sq02 kernel: next_to_clean <3c>
Mar 17 15:59:54 c862f3sq02 kernel: buffer_info[next_to_clean]
Mar 17 15:59:54 c862f3sq02 kernel: time_stamp <1004d6039>
Mar 17 15:59:54 c862f3sq02 kernel: next_to_watch <41>
Mar 17 15:59:54 c862f3sq02 kernel: jiffies <1004d6164>
Mar 17 15:59:54 c862f3sq02 kernel: next_to_watch.status <0>
Mar 17 15:59:54 c862f3sq02 kernel: klogd 1.4.1, ---------- state change ----------
Mar 17 15:59:56 c862f3sq02 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 15:59:56 c862f3sq02 kernel: Tx Queue <0>
Mar 17 15:59:56 c862f3sq02 kernel: TDH <3d>
Mar 17 15:59:56 c862f3sq02 kernel: TDT <1f>
Mar 17 15:59:56 c862f3sq02 kernel: next_to_use <1f>
Mar 17 15:59:56 c862f3sq02 kernel: next_to_clean <3c>
Mar 17 15:59:56 c862f3sq02 kernel: buffer_info[next_to_clean]
Mar 17 15:59:56 c862f3sq02 kernel: time_stamp <1004d6039>
Mar 17 15:59:56 c862f3sq02 kernel: next_to_watch <41>
Mar 17 15:59:56 c862f3sq02 kernel: jiffies <1004d622c>
Mar 17 15:59:56 c862f3sq02 kernel: next_to_watch.status <0>
Mar 17 15:59:58 c862f3sq02 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 15:59:58 c862f3sq02 kernel: Tx Queue <0>
Mar 17 15:59:58 c862f3sq02 kernel: TDH <3d>
Mar 17 15:59:58 c862f3sq02 kernel: TDT <1f>
Mar 17 15:59:58 c862f3sq02 kernel: next_to_use <1f>
Mar 17 15:59:58 c862f3sq02 kernel: next_to_clean <3c>
Mar 17 15:59:58 c862f3sq02 kernel: buffer_info[next_to_clean]
Mar 17 15:59:58 c862f3sq02 kernel: time_stamp <1004d6039>
Mar 17 15:59:58 c862f3sq02 kernel: next_to_watch <41>
Mar 17 15:59:58 c862f3sq02 kernel: jiffies <1004d62f4>
Mar 17 15:59:58 c862f3sq02 kernel: next_to_watch.status <0>
Mar 17 16:00:03 c862f3sq02 kernel: e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Mar 17 17:42:59 c862f3sq02 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 17:42:59 c862f3sq02 kernel: Tx Queue <0>
Mar 17 17:42:59 c862f3sq02 kernel: TDH <ec>
Mar 17 17:42:59 c862f3sq02 kernel: TDT <e8>
Mar 17 17:42:59 c862f3sq02 kernel: next_to_use <e8>
Mar 17 17:42:59 c862f3sq02 kernel: next_to_clean <ec>
Mar 17 17:42:59 c862f3sq02 kernel: buffer_info[next_to_clean]
Mar 17 17:42:59 c862f3sq02 kernel: time_stamp <10056d08d>
Mar 17 17:42:59 c862f3sq02 kernel: next_to_watch <f0>
Mar 17 17:42:59 c862f3sq02 kernel: jiffies <10056d168>
Mar 17 17:42:59 c862f3sq02 kernel: next_to_watch.status <0>
Mar 17 17:43:01 c862f3sq02 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 17:43:01 c862f3sq02 kernel: Tx Queue <0>
Mar 17 17:43:01 c862f3sq02 kernel: TDH <ec>
Mar 17 17:43:01 c862f3sq02 kernel: TDT <e8>
Mar 17 17:43:01 c862f3sq02 kernel: next_to_use <e8>
Mar 17 17:43:01 c862f3sq02 kernel: next_to_clean <ec>
Mar 17 17:43:01 c862f3sq02 kernel: buffer_info[next_to_clean]
Mar 17 17:43:01 c862f3sq02 kernel: time_stamp <10056d08d>
Mar 17 17:43:01 c862f3sq02 kernel: next_to_watch <f0>
Mar 17 17:43:01 c862f3sq02 kernel: jiffies <10056d230>
Mar 17 17:43:01 c862f3sq02 kernel: next_to_watch.status <0>
Mar 17 17:43:06 c862f3sq02 kernel: e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: R
--snip--
Mar 17 18:43:32 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 18:43:32 c862f3sq03 kernel: Tx Queue <0>
Mar 17 18:43:32 c862f3sq03 kernel: TDH <3d>
Mar 17 18:43:32 c862f3sq03 kernel: TDT <37>
Mar 17 18:43:32 c862f3sq03 kernel: next_to_use <37>
Mar 17 18:43:32 c862f3sq03 kernel: next_to_clean <3c>
Mar 17 18:43:32 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 18:43:32 c862f3sq03 kernel: time_stamp <100ac71f5>
Mar 17 18:43:32 c862f3sq03 kernel: next_to_watch <41>
Mar 17 18:43:32 c862f3sq03 kernel: jiffies <100ac72e4>
Mar 17 18:43:32 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 18:43:32 c862f3sq03 kernel: klogd 1.4.1, ---------- state change ----------
Mar 17 18:43:34 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 18:43:34 c862f3sq03 kernel: Tx Queue <0>
Mar 17 18:43:34 c862f3sq03 kernel: TDH <3d>
Mar 17 18:43:34 c862f3sq03 kernel: TDT <37>
Mar 17 18:43:34 c862f3sq03 kernel: next_to_use <37>
Mar 17 18:43:34 c862f3sq03 kernel: next_to_clean <3c>
Mar 17 18:43:34 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 18:43:34 c862f3sq03 kernel: time_stamp <100ac71f5>
Mar 17 18:43:34 c862f3sq03 kernel: next_to_watch <41>
Mar 17 18:43:34 c862f3sq03 kernel: jiffies <100ac73ac>
Mar 17 18:43:34 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 18:43:36 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 18:43:36 c862f3sq03 kernel: Tx Queue <0>
Mar 17 18:43:36 c862f3sq03 kernel: TDH <3d>
Mar 17 18:43:36 c862f3sq03 kernel: TDT <37>
Mar 17 18:43:36 c862f3sq03 kernel: next_to_use <37>
Mar 17 18:43:36 c862f3sq03 kernel: next_to_clean <3c>
Mar 17 18:43:36 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 18:43:36 c862f3sq03 kernel: time_stamp <100ac71f5>
Mar 17 18:43:36 c862f3sq03 kernel: next_to_watch <41>
Mar 17 18:43:36 c862f3sq03 kernel: jiffies <100ac7474>
Mar 17 18:43:36 c862f3sq03 kernel: next_to_watch.status <0>
Mar 17 18:43:38 c862f3sq03 kernel: e1000: eth1: e1000_clean_tx_irq: Detected Tx Unit Hang
Mar 17 18:43:38 c862f3sq03 kernel: Tx Queue <0>
Mar 17 18:43:38 c862f3sq03 kernel: TDH <3d>
Mar 17 18:43:38 c862f3sq03 kernel: TDT <37>
Mar 17 18:43:38 c862f3sq03 kernel: next_to_use <37>
Mar 17 18:43:38 c862f3sq03 kernel: next_to_clean <3c>
Mar 17 18:43:38 c862f3sq03 kernel: buffer_info[next_to_clean]
Mar 17 18:43:38 c862f3sq03 kernel: time_stamp <100ac71f5>
Mar 17 18:43:38 c862f3sq03 kernel: next_to_watch <41>
Mar 17 18:43:38 c862f3sq03 kernel: jiffies <100ac753c>
Mar 17 18:43:38 c862f3sq03 kernel: next_to_watch.status <0>
--snip--
Mar 17 19:21:15 c862f3sq02 kernel: Unable to handle kernel paging request for data at address 0x00000000
Mar 17 19:21:15 c862f3sq02 kernel: Faulting instruction address: 0xc00000000010776c
Mar 17 19:21:15 c862f3sq02 kernel: Oops: Kernel access of bad area, sig: 11 [#1]
Mar 17 19:21:15 c862f3sq02 kernel: SMP NR_CPUS=1024 NUMA pSeries
Mar 17 19:21:15 c862f3sq02 kernel: Modules linked in: mmfs26(X) mmfslinux(X) tracedev(X) nfs lockd nfs_acl sunrpc dm_round_robin scsi_dh_rdac dm_multipath scsi_dh ipv6 af_packet fuse loop dm_mod lpfc sr_mod cdrom ses scsi_transport_fc sg enclosure e100 e1000 scsi_tgt ib_ehca mii ib_core sd_mod crc_t10dif ipr(X) pata_pdc2027x libata scsi_mod
Mar 17 19:21:15 c862f3sq02 kernel: Supported: Yes, External
Mar 17 19:21:15 c862f3sq02 kernel: NIP: c00000000010776c LR: c000000000107734 CTR: 0000000000000000
Mar 17 19:21:15 c862f3sq02 kernel: REGS: c0000001d0f6b560 TRAP: 0300 Tainted: G W (2.6.27.19-5-ppc64)
Mar 17 19:21:15 c862f3sq02 kernel: MSR: 8000000000009032 <EE,ME,IR,DR> CR: 44000002 XER: 00000010
Mar 17 19:21:15 c862f3sq02 kernel: DAR: 0000000000000000, DSISR: 0000000040000000
Mar 17 19:21:15 c862f3sq02 kernel: TASK = c0000001db8bada0[11171] 'bash' THREAD: c0000001d0f68000 CPU: 2
Mar 17 19:21:15 c862f3sq02 kernel: GPR00: 0000000000000000 c0000001d0f6b7e0 c0000000009cbc80 0000000000000000
Mar 17 19:21:15 c862f3sq02 kernel: GPR04: c0000001da3c2300 00000000000000d0 0000000000000000 c0000001a7310000
Mar 17 19:21:15 c862f3sq02 kernel: GPR08: 000000000001a731 00000000000001a7 0000000000000000 0000000000000000
Mar 17 19:21:15 c862f3sq02 kernel: GPR12: 0000000000000005 c000000000a93080 c000000000094818 0000000000000000
Mar 17 19:21:15 c862f3sq02 kernel: GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000002000000
Mar 17 19:21:15 c862f3sq02 kernel: GPR20: 00006b3600000093 c0000001da3c2300 000004000003dfd0 c0000001da55c5b0
Mar 17 19:21:15 c862f3sq02 kernel: GPR24: c0000001db890000 c0000001a7310018 c000000001f50c50 c000000001fa3600
Mar 17 19:21:15 c862f3sq02 kernel: GPR28: c0000000020d2c00 0000000000000000 c00000000094b070 00006b3600000093
Mar 17 19:21:15 c862f3sq02 kernel: NIP [c00000000010776c] .do_wp_page+0x520/0x830
Mar 17 19:21:15 c862f3sq02 kernel: LR [c000000000107734] .do_wp_page+0x4e8/0x830
Mar 17 19:21:15 c862f3sq02 kernel: Call Trace:
Mar 17 19:21:15 c862f3sq02 kernel: [c0000001d0f6b7e0] [c0000000001076f4] .do_wp_page+0x4a8/0x830 (unreliable)
Mar 17 19:21:15 c862f3sq02 kernel: [c0000001d0f6b8b0] [c000000000109be8] .handle_mm_fault+0x36c/0x478
Mar 17 19:21:15 c862f3sq02 kernel: [c0000001d0f6b990] [c000000000518b10] .do_page_fault+0x3c4/0x5c0
Mar 17 19:21:15 c862f3sq02 kernel: [c0000001d0f6bac0] [c00000000000567c] handle_page_fault+0x20/0x5c
Mar 17 19:21:15 c862f3sq02 kernel: --- Exception: 301 at .schedule_tail+0x78/0x94
Mar 17 19:21:15 c862f3sq02 kernel: LR = .schedule_tail+0x70/0x94
Mar 17 19:21:15 c862f3sq02 kernel: [c0000001d0f6bdb0] [c00000000008bdd8] .schedule_tail+0x2c/0x94 (unreliable)
Mar 17 19:21:15 c862f3sq02 kernel: [c0000001d0f6be30] [c000000000008910] .ret_from_fork+0x4/0x74
Mar 17 19:21:15 c862f3sq02 kernel: Instruction dump:
Mar 17 19:21:15 c862f3sq02 kernel: 409e02c8 e8f80000 3c004000 e97e8008 39400000 780007c6 78e905a4 7d290214
Mar 17 19:21:15 c862f3sq02 kernel: 7920e120 79288402 78001f24 79294602 <7d6b002a> 2fab0000 419e000c 79202428
Mar 17 19:21:15 c862f3sq02 kernel: ---[ end trace e6c07b27e638f8ff ]---
^ permalink raw reply
* Re: [RFC][PATCH] ipmr: Fix struct mfcctl to be independent of MAXVIFS v2
From: Ben Greear @ 2010-04-06 16:57 UTC (permalink / raw)
To: Eric W. Biederman
Cc: netdev, David S. Miller, Eric Dumazet, Patrick McHardy, Ilia K,
Tom Goff
In-Reply-To: <m1eiis8uc6.fsf@fess.ebiederm.org>
On 04/06/2010 08:38 AM, Eric W. Biederman wrote:
>
> Right now if you recompile the kernel increasing MAXVIFS
> to support more VIFS users of the MRT_ADD_VIF and MRT_DEL_VIF
> will break because the ABI changed.
>
> My goal is an API that works with just a recompile of existing
> applications, and an ABI that continues to work for old
> applications.
>
> The unused/dead fields at the end of struct mfcctl make this
> exercise more difficult than it should be.
>
> - Rename the existing struct mfcctl mfcctl_old.
> - Define a new and larger struct mfcctl that we can detect
> by size.
>
> The new and larger struct mfcctl won't have trailing garbage
> fields so we can accept anything of that size or larger,
> and simply ignore the entries that are above MAXVIFS.
>
> My new struct mfcctl is now 128 bytes which is noticeable on
> the stack but should still be small enough not to cause problems.
>
> v2: Rework the support larger arrays so that most/all? existing
> applications can simply be recompiled and work with a larger
> maximum number of VIFS.
If we're going to change the ABI, can we not support an arbitrary
number of VIFS instead of just a larger fixed maximum?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: Eric Dumazet @ 2010-04-06 17:47 UTC (permalink / raw)
To: John Linn
Cc: netdev, linuxppc-dev, grant.likely, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <bf8eac92-5008-4c1f-9b99-0199e62436fa@SG2EHSMHS010.ehs.local>
>
> Yes I see how it's used, but it only allows you to reserve 2 bytes in the skb with no options.
Really ? This would be a bug !
__alloc_skb() uses kmalloc(XXXX), this gives you the guarantee you want,
or maybe comment you wrote is not what is _really_ necessary ?
/* Align the IP data in the packet on word boundaries as MicroBlaze
* needs it.
*/
^ permalink raw reply
* Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: Grant Likely @ 2010-04-06 17:54 UTC (permalink / raw)
To: John Linn
Cc: Eric Dumazet, linuxppc-dev, netdev, John Tyner, michal.simek,
john.williams
In-Reply-To: <7a42d507-bf50-40f3-a2a0-8de682b314d7@SG2EHSMHS017.ehs.local>
On Mon, Apr 5, 2010 at 3:33 PM, John Linn <John.Linn@xilinx.com> wrote:
> From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
>> > +/* Align the IP data in the packet on word boundaries as MicroBlaze
>> > + * needs it.
>> > + */
>> > +
>> > #define XTE_ALIGN 32
>> > -#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
>> > +#define BUFFER_ALIGN(adr) ((34 - ((u32) adr)) % XTE_ALIGN)
>> >
>>
>> Very interesting way of doing this, but why such convoluted thing ?
>
> Grant might have insight into why this started this way, I just updated to help with MicroBlaze alignment.
It was that way in the code I received from Yoshio Kashiwagi and David
H. Lynch. I have no problem with it being changed.
Personally I would probably write a followup patch to change this to
netdev_alloc_skb_ip_align(), just to keep changes logically separated.
But I'm okay with it rolled into this patch also.
g.
^ permalink raw reply
* Re: [PATCH] vhost: Make it more scalable by creating a vhost thread per device.
From: Avi Kivity @ 2010-04-06 18:49 UTC (permalink / raw)
To: Sridhar Samudrala
Cc: Michael S. Tsirkin, Tom Lendacky, netdev, kvm@vger.kernel.org
In-Reply-To: <1270488911.27874.43.camel@w-sridhar.beaverton.ibm.com>
On 04/05/2010 08:35 PM, Sridhar Samudrala wrote:
> On Sun, 2010-04-04 at 14:14 +0300, Michael S. Tsirkin wrote:
>
>> On Fri, Apr 02, 2010 at 10:31:20AM -0700, Sridhar Samudrala wrote:
>>
>>> Make vhost scalable by creating a separate vhost thread per vhost
>>> device. This provides better scaling across multiple guests and with
>>> multiple interfaces in a guest.
>>>
>> Thanks for looking into this. An alternative approach is
>> to simply replace create_singlethread_workqueue with
>> create_workqueue which would get us a thread per host CPU.
>>
>> It seems that in theory this should be the optimal approach
>> wrt CPU locality, however, in practice a single thread
>> seems to get better numbers. I have a TODO to investigate this.
>> Could you try looking into this?
>>
> Yes. I tried using create_workqueue(), but the results were not good
> atleast when the number of guest interfaces is less than the number
> of CPUs. I didn't try more than 8 guests.
> Creating a separate thread per guest interface seems to be more
> scalable based on the testing i have done so far.
>
Thread per guest is also easier to account. I'm worried about guests
impacting other guests' performance outside scheduler control by
extensive use of vhost.
--
Do not meddle in the internals of kernels, for they are subtle and quick to panic.
^ permalink raw reply
* Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: Grant Likely @ 2010-04-06 18:53 UTC (permalink / raw)
To: John Linn
Cc: Eric Dumazet, netdev, linuxppc-dev, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <bf8eac92-5008-4c1f-9b99-0199e62436fa@SG2EHSMHS010.ehs.local>
On Tue, Apr 6, 2010 at 11:11 AM, John Linn <John.Linn@xilinx.com> wrote:
>> -----Original Message-----
>> From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
>> Sent: Tuesday, April 06, 2010 11:01 AM
>> To: John Linn
>> Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
>> jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
>> Subject: RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>>
>> Le mardi 06 avril 2010 à 10:12 -0600, John Linn a écrit :
>> > > -----Original Message-----
>> > > From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
>> > > Sent: Monday, April 05, 2010 3:30 PM
>> > > To: John Linn
>> > > Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
>> > > jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
>> > > Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>> > >
>> > > Le lundi 05 avril 2010 à 15:11 -0600, John Linn a écrit :
>> > > > This patch adds support for using the LL TEMAC Ethernet driver on
>> > > > non-Virtex 5 platforms by adding support for accessing the Soft DMA
>> > > > registers as if they were memory mapped instead of solely through the
>> > > > DCR's (available on the Virtex 5).
>> > > >
>> > > > The patch also updates the driver so that it runs on the MicroBlaze.
>> > > > The changes were tested on the PowerPC 440, PowerPC 405, and the
>> > > > MicroBlaze platforms.
>> > > >
>> > > > Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
>> > > > Signed-off-by: John Linn <john.linn@xilinx.com>
>> > > >
>> > > > ---
>> > >
>> > > > +/* Align the IP data in the packet on word boundaries as MicroBlaze
>> > > > + * needs it.
>> > > > + */
>> > > > +
>> > > > #define XTE_ALIGN 32
>> > > > -#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
>> > > > +#define BUFFER_ALIGN(adr) ((34 - ((u32) adr)) % XTE_ALIGN)
>> > > >
>> > >
>> > > Very interesting way of doing this, but why such convoluted thing ?
>> >
>> > This is trying to align for a cache line (32 bytes) before my change.
>> >
>> > My change was then also making it align the IP data on a word boundary.
>> >
>> > >
>> > > Because of the % 32, this is equivalent to :
>> > >
>> > > #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
>> > >
>> >
>> > Yes, but I'm not sure that's clearer IMHO.
>> >
>> > > But wait, dont we recognise the magic constant NET_IP_ALIGN ?
>> >
>> > Yes it could be used. I'm struggling with how to make this all be clearer.
>> >
>>
>> I am not saying its clearer, I am saying we have a standard way to
>> handle this exact problem (aligning rcvs buffer so that IP header is
>> aligned)
>>
>> There is no need to invent new ones, this makes reviewing of this driver
>> more difficult.
Hold on.... BUFFER_ALIGN is being used to align the DMA buffer on a
cache line boundary. I don't think netdev_alloc_skb() makes any
guarantees about how the start of the IP header lines up against cache
line boundaries. The amount of padding needed is not known until an
skbuff is obtained from netdev_alloc_skb(), and
netdev_alloc_skb_ip_align() can only handle a fixed size padding,
It doesn't look like netdev_alloc_skb_ip_align() is the right thing in
this regard.
>> > How about this?
>> > #define BUFFER_ALIGN(adr) (((XTE_ALIGN + NET_IP_ALIGN) - ((u32) adr)) % XTE_ALIGN)
>> >
>>
>> Sorry, I still dont understand why you need XTE_ALIGN + ...
>>
>> ((A + B) - C) % A is equal to (B - C) % A
>>
>> Which one is more readable ?
>
> I'm fine with your suggestion.
>
> #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
>
>>
>> Please take a look at existing and clean code, no magic macro, and we
>> can understand the intention.
>>
>> find drivers/net | xargs grep -n netdev_alloc_skb_ip_align
>>
>>
>
> Yes I see how it's used, but it only allows you to reserve 2 bytes in the skb with no options.
Eric is here. The mod operation means that BUFFER_ALIGN using either
2 or 34 is equivalent.
g.
^ permalink raw reply
* Re: [Bugme-new] [Bug 15682] New: XFRM is not updating RTAX_ADVMSS metric
From: Eduardo Panisset @ 2010-04-06 19:02 UTC (permalink / raw)
To: hadi
Cc: Andrew Morton, Herbert Xu, netdev, bugzilla-daemon, bugme-daemon,
David S. Miller
In-Reply-To: <1270561240.7198.3.camel@bigi>
Hi,
My intention is only to report a problem that I have faced. The
solution proposed isn't (I know that) probably the best one to adopt
as I'm not a kernel specialist, it is more illustrative to allow you
guys understanding what I'm meaning and solve that on the better way
(hence I haven't submited a patch).
Regards,
Eduardo Panisset.
On Tue, Apr 6, 2010 at 10:40 AM, jamal <hadi@cyberus.ca> wrote:
>
> Herbert would give better answers. I dont think what Eduardo is
> doing is correct. You cant just start factoring in tcp headers
> at the xfrm level - and besides, the mtu calculation
> already takes care tunnel headers - so tcp should be able to
> compute correct MSS.
>
> cheers,
> jamal
>
> On Mon, 2010-04-05 at 12:50 -0700, Andrew Morton wrote:
>> (switched to email. Please respond via emailed reply-to-all, not via the
>> bugzilla web interface).
>>
>> On Fri, 2 Apr 2010 17:34:35 GMT
>> bugzilla-daemon@bugzilla.kernel.org wrote:
>>
>> > https://bugzilla.kernel.org/show_bug.cgi?id=15682
>> >
>> > Summary: XFRM is not updating RTAX_ADVMSS metric
>> > Product: Networking
>> > Version: 2.5
>> > Kernel Version: 2.6.28-2
>> > Platform: All
>> > OS/Version: Linux
>> > Tree: Mainline
>> > Status: NEW
>> > Severity: normal
>> > Priority: P1
>> > Component: Other
>> > AssignedTo: acme@ghostprotocols.net
>> > ReportedBy: eduardo.panisset@gmail.com
>> > Regression: No
>> >
>> >
>> > I have been testing DSMIPv6 code which uses all kind of advanced
>> > features of XFRM framework and I believe I have found a bug related to
>> > update RTAX_ADVMSS route metric.
>> > The XFRM code on net/xfrm/xfrm_policy.c by its functions
>> > xfrm_init_pmtu and xfrm_bundle_ok updates RTAX_MTU route caching
>> > metric however I believe it must update RTAX_ADVMSS as this later is
>> > used by tcp connect function for adverting the MSS value on SYN
>> > messages.
>> >
>> > As MSS is not being updated by XFRM the TCP SYN messages (e.g.
>> > originated from a internet browser) is erroneously informing its MSS
>> > (without taking into account the overhead added to IP packet size by
>> > XFRM transformations). One result of that is the browser gets
>> > "frozen" after starts a TCP connection because TCP messages sent by
>> > TCP server will never get to it (TCP server is sending too large
>> > segments to browser).
>> >
>> > Below I describe the changes I have done (on xfrm_init_pmtu and
>> > xfrm_bundle_ok) and that seem to fix this problem:
>> >
>> > xfrm_init_pmtu:
>> > .
>> > .
>> > .
>> >
>> > dst->metrics[RTAX_MTU-1] = pmtu; // original code, below my changes
>> >
>> > if (dst->xfrm->props.mode == XFRM_MODE_TUNNEL)
>> > switch (dst->xfrm->props.family)
>> > {
>> > case AF_INET:
>> > dst->metrics[RTAX_ADVMSS-1] = max_t(unsigned int,
>> > pmtu - sizeof(struct iphdr) - sizeof(struct tcphdr), 256);
>> > break;
>> >
>> > case AF_INET6:
>> > dst->metrics[RTAX_ADVMSS-1] = max_t(unsigned int,
>> > pmtu - sizeof(struct ipv6hdr) - sizeof(struct tcphdr),
>> > dev_net(dst->dev)->ipv6.
>> > sysctl.ip6_rt_min_advmss);
>> > break;
>> > }
>> >
>> > xfrm_bundle_ok:
>> >
>> > .
>> > .
>> > .
>> >
>> > dst->metrics[RTAX_MTU-1] = mtu; // original code, below my changes
>> >
>> > if (dst->xfrm->props.mode == XFRM_MODE_TUNNEL)
>> > switch (dst->xfrm->props.family)
>> > {
>> > case AF_INET:
>> > dst->metrics[RTAX_ADVMSS-1] = max_t(unsigned
>> > int, mtu - sizeof(struct iphdr) - sizeof(struct tcphdr), 256);
>> > break;
>> >
>> > case AF_INET6:
>> > dst->metrics[RTAX_ADVMSS-1] = max_t(unsigned
>> > int, mtu - sizeof(struct ipv6hdr) - sizeof(struct tcphdr),
>> >
>> > dev_net(dst->dev)->ipv6.sysctl.ip6_rt_min_advmss);
>> > break;
>> > }
>> >
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply
* Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: Steven J. Magnani @ 2010-04-06 20:03 UTC (permalink / raw)
To: Grant Likely
Cc: John Linn, Eric Dumazet, netdev, linuxppc-dev, jwboyer,
john.williams, michal.simek, John Tyner
In-Reply-To: <k2mfa686aa41004061153q3d065924o9172b1cf6038d917@mail.gmail.com>
On Tue, 2010-04-06 at 12:53 -0600, Grant Likely wrote:
> Hold on.... BUFFER_ALIGN is being used to align the DMA buffer on a
> cache line boundary. I don't think netdev_alloc_skb() makes any
> guarantees about how the start of the IP header lines up against cache
> line boundaries. The amount of padding needed is not known until an
> skbuff is obtained from netdev_alloc_skb(), and
> netdev_alloc_skb_ip_align() can only handle a fixed size padding,
>
> It doesn't look like netdev_alloc_skb_ip_align() is the right thing in
> this regard.
__netdev_alloc_skb reserves NET_SKB_PAD bytes which gets us cacheline
alignment on Microblaze. From include/linux/skbuff.h:
/*
* The networking layer reserves some headroom in skb data (via
* dev_alloc_skb). This is used to avoid having to reallocate skb data
when
* the header has to grow. In the default case, if the header has to
grow
* 32 bytes or less we avoid the reallocation.
*
* Unfortunately this headroom changes the DMA alignment of the
resulting
* network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
* on some architectures. An architecture can override this value,
* perhaps setting it to a cacheline in size (since that will maintain
* cacheline alignment of the DMA). It must be a power of 2.
*
* Various parts of the networking layer expect at least 32 bytes of
* headroom, you should not reduce this.
*/
#ifndef NET_SKB_PAD
#define NET_SKB_PAD 32
#endif
If this doesn't work for some of the PPC variants with larger cache
lines, maybe one of the PPC header files needs to define NET_SKB_PAD?
And if we want to guard against possible future changes to the default
NET_SKB_PAD breaking Microblaze operation, maybe one of its headers
should define NET_SKB_PAD as well?
------------------------------------------------------------------------
Steven J. Magnani "I claim this network for MARS!
www.digidescorp.com Earthling, return my space modulator!"
#include <standard.disclaimer>
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: John Linn @ 2010-04-06 20:03 UTC (permalink / raw)
To: Grant Likely
Cc: Eric Dumazet, netdev, linuxppc-dev, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <k2mfa686aa41004061153q3d065924o9172b1cf6038d917@mail.gmail.com>
> -----Original Message-----
> From: glikely@secretlab.ca [mailto:glikely@secretlab.ca] On Behalf Of Grant Likely
> Sent: Tuesday, April 06, 2010 12:54 PM
> To: John Linn
> Cc: Eric Dumazet; netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; jwboyer@linux.vnet.ibm.com;
> john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>
> On Tue, Apr 6, 2010 at 11:11 AM, John Linn <John.Linn@xilinx.com> wrote:
> >> -----Original Message-----
> >> From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> >> Sent: Tuesday, April 06, 2010 11:01 AM
> >> To: John Linn
> >> Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
> >> jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> >> Subject: RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
> >>
> >> Le mardi 06 avril 2010 à 10:12 -0600, John Linn a écrit :
> >> > > -----Original Message-----
> >> > > From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> >> > > Sent: Monday, April 05, 2010 3:30 PM
> >> > > To: John Linn
> >> > > Cc: netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca;
> >> > > jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> >> > > Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
> >> > >
> >> > > Le lundi 05 avril 2010 à 15:11 -0600, John Linn a écrit :
> >> > > > This patch adds support for using the LL TEMAC Ethernet driver on
> >> > > > non-Virtex 5 platforms by adding support for accessing the Soft DMA
> >> > > > registers as if they were memory mapped instead of solely through the
> >> > > > DCR's (available on the Virtex 5).
> >> > > >
> >> > > > The patch also updates the driver so that it runs on the MicroBlaze.
> >> > > > The changes were tested on the PowerPC 440, PowerPC 405, and the
> >> > > > MicroBlaze platforms.
> >> > > >
> >> > > > Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
> >> > > > Signed-off-by: John Linn <john.linn@xilinx.com>
> >> > > >
> >> > > > ---
> >> > >
> >> > > > +/* Align the IP data in the packet on word boundaries as MicroBlaze
> >> > > > + * needs it.
> >> > > > + */
> >> > > > +
> >> > > > #define XTE_ALIGN 32
> >> > > > -#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
> >> > > > +#define BUFFER_ALIGN(adr) ((34 - ((u32) adr)) % XTE_ALIGN)
> >> > > >
> >> > >
> >> > > Very interesting way of doing this, but why such convoluted thing ?
> >> >
> >> > This is trying to align for a cache line (32 bytes) before my change.
> >> >
> >> > My change was then also making it align the IP data on a word boundary.
> >> >
> >> > >
> >> > > Because of the % 32, this is equivalent to :
> >> > >
> >> > > #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
> >> > >
> >> >
> >> > Yes, but I'm not sure that's clearer IMHO.
> >> >
> >> > > But wait, dont we recognise the magic constant NET_IP_ALIGN ?
> >> >
> >> > Yes it could be used. I'm struggling with how to make this all be clearer.
> >> >
> >>
> >> I am not saying its clearer, I am saying we have a standard way to
> >> handle this exact problem (aligning rcvs buffer so that IP header is
> >> aligned)
> >>
> >> There is no need to invent new ones, this makes reviewing of this driver
> >> more difficult.
>
> Hold on.... BUFFER_ALIGN is being used to align the DMA buffer on a
> cache line boundary. I don't think netdev_alloc_skb() makes any
> guarantees about how the start of the IP header lines up against cache
> line boundaries. The amount of padding needed is not known until an
> skbuff is obtained from netdev_alloc_skb(), and
> netdev_alloc_skb_ip_align() can only handle a fixed size padding,
>
> It doesn't look like netdev_alloc_skb_ip_align() is the right thing in
> this regard.
>
> >> > How about this?
> >> > #define BUFFER_ALIGN(adr) (((XTE_ALIGN + NET_IP_ALIGN) - ((u32) adr)) % XTE_ALIGN)
> >> >
> >>
> >> Sorry, I still dont understand why you need XTE_ALIGN + ...
> >>
> >> ((A + B) - C) % A is equal to (B - C) % A
> >>
> >> Which one is more readable ?
> >
> > I'm fine with your suggestion.
> >
> > #define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
> >
> >>
> >> Please take a look at existing and clean code, no magic macro, and we
> >> can understand the intention.
> >>
> >> find drivers/net | xargs grep -n netdev_alloc_skb_ip_align
> >>
> >>
> >
> > Yes I see how it's used, but it only allows you to reserve 2 bytes in the skb with no options.
>
> Eric is here. The mod operation means that BUFFER_ALIGN using either
> 2 or 34 is equivalent.
>
> g.
I can spin another patch with the following and with Grant's Kconfig changes, just looking for confirmation that's acceptable.
#define BUFFER_ALIGN(adr) ((2 - ((u32) adr)) % XTE_ALIGN)
Thanks,
John
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: John Linn @ 2010-04-06 20:12 UTC (permalink / raw)
To: steve, grant.likely
Cc: Eric Dumazet, netdev, linuxppc-dev, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <1270584223.3949.57.camel@iscandar.digidescorp.com>
> -----Original Message-----
> From: Steven J. Magnani [mailto:steve@digidescorp.com]
> Sent: Tuesday, April 06, 2010 2:04 PM
> To: grant.likely@secretlab.ca
> Cc: John Linn; Eric Dumazet; netdev@vger.kernel.org;
linuxppc-dev@ozlabs.org;
> jwboyer@linux.vnet.ibm.com; john.williams@petalogix.com;
michal.simek@petalogix.com; John Tyner
> Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>
> On Tue, 2010-04-06 at 12:53 -0600, Grant Likely wrote:
>
> > Hold on.... BUFFER_ALIGN is being used to align the DMA buffer on a
> > cache line boundary. I don't think netdev_alloc_skb() makes any
> > guarantees about how the start of the IP header lines up against
cache
> > line boundaries. The amount of padding needed is not known until an
> > skbuff is obtained from netdev_alloc_skb(), and
> > netdev_alloc_skb_ip_align() can only handle a fixed size padding,
> >
> > It doesn't look like netdev_alloc_skb_ip_align() is the right thing
in
> > this regard.
>
> __netdev_alloc_skb reserves NET_SKB_PAD bytes which gets us cacheline
> alignment on Microblaze. From include/linux/skbuff.h:
>
Good find. I'll give it a test on MicroBlaze and PowerPC.
> /*
> * The networking layer reserves some headroom in skb data (via
> * dev_alloc_skb). This is used to avoid having to reallocate skb data
> when
> * the header has to grow. In the default case, if the header has to
> grow
> * 32 bytes or less we avoid the reallocation.
> *
> * Unfortunately this headroom changes the DMA alignment of the
> resulting
> * network packet. As for NET_IP_ALIGN, this unaligned DMA is
expensive
> * on some architectures. An architecture can override this value,
> * perhaps setting it to a cacheline in size (since that will maintain
> * cacheline alignment of the DMA). It must be a power of 2.
> *
> * Various parts of the networking layer expect at least 32 bytes of
> * headroom, you should not reduce this.
> */
> #ifndef NET_SKB_PAD
> #define NET_SKB_PAD 32
> #endif
>
> If this doesn't work for some of the PPC variants with larger cache
> lines, maybe one of the PPC header files needs to define NET_SKB_PAD?
Looks like it is defined in system.h in powerpc so that it works.
> And if we want to guard against possible future changes to the default
> NET_SKB_PAD breaking Microblaze operation, maybe one of its headers
> should define NET_SKB_PAD as well?
Good idea, we can add that to system.h for MicroBlaze also.
Thanks,
John
>
>
------------------------------------------------------------------------
> Steven J. Magnani "I claim this network for MARS!
> www.digidescorp.com Earthling, return my space
modulator!"
>
> #include <standard.disclaimer>
>
>
>
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
^ permalink raw reply
* Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: Eric Dumazet @ 2010-04-06 20:24 UTC (permalink / raw)
To: Grant Likely
Cc: John Linn, netdev, linuxppc-dev, jwboyer, john.williams,
michal.simek, John Tyner
In-Reply-To: <k2mfa686aa41004061153q3d065924o9172b1cf6038d917@mail.gmail.com>
Le mardi 06 avril 2010 à 12:53 -0600, Grant Likely a écrit :
> Hold on.... BUFFER_ALIGN is being used to align the DMA buffer on a
> cache line boundary. I don't think netdev_alloc_skb() makes any
> guarantees about how the start of the IP header lines up against cache
> line boundaries. The amount of padding needed is not known until an
> skbuff is obtained from netdev_alloc_skb(), and
> netdev_alloc_skb_ip_align() can only handle a fixed size padding,
>
> It doesn't look like netdev_alloc_skb_ip_align() is the right thing in
> this regard.
>
OK, time to have a long explanation :
netdev_alloc_skb_ip_align() is doing the right thing, but it seems you
guys insist to invent a new private stuff.
I am only wondering if you really know why you do this.
Many drivers do have same requirements, so every driver should reinvent
the wheel ? Really this is beyond me.
Original code was aligning the buffer on a 32 bytes boundary (because of
a hardware requirement on NIC, I only trust original code on this).
Then you want to change this to align buffer on this 32 bytes boundary
PLUS 2. What is this kind of new requirement ?
1) Hardware requirement really changed that much. (firmware changed on
NIC). If not using this new alignement, NIC doesnt work at all.
2) or Microblaze arch requires that IP header is aligned on a word
boundary to avoid unaligned traps in IP stack ? (like many arches)
If this is the latest requirement, then use standard mechanism.
skb data is naturally aligned on L1_CACHE_SIZE + SKB_PAD boundaries.
(32 bytes alignment)
netdev_alloc_skb_ip_align()() then skips 2 bytes to make skb data
aligned so that 2 + 14 (sizeof eth header) = 16 : IP header is aligned
(modulo 16)
It just works. If not, we should correct it, please fill a bug report.
Thanks
^ permalink raw reply
* RE: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
From: John Linn @ 2010-04-06 20:32 UTC (permalink / raw)
To: Eric Dumazet, grant.likely
Cc: netdev, linuxppc-dev, jwboyer, john.williams, michal.simek,
John Tyner
In-Reply-To: <1270585441.2091.65.camel@edumazet-laptop>
> -----Original Message-----
> From: Eric Dumazet [mailto:eric.dumazet@gmail.com]
> Sent: Tuesday, April 06, 2010 2:24 PM
> To: grant.likely@secretlab.ca
> Cc: John Linn; netdev@vger.kernel.org; linuxppc-dev@ozlabs.org; jwboyer@linux.vnet.ibm.com;
> john.williams@petalogix.com; michal.simek@petalogix.com; John Tyner
> Subject: Re: [PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver
>
> Le mardi 06 avril 2010 à 12:53 -0600, Grant Likely a écrit :
>
> > Hold on.... BUFFER_ALIGN is being used to align the DMA buffer on a
> > cache line boundary. I don't think netdev_alloc_skb() makes any
> > guarantees about how the start of the IP header lines up against cache
> > line boundaries. The amount of padding needed is not known until an
> > skbuff is obtained from netdev_alloc_skb(), and
> > netdev_alloc_skb_ip_align() can only handle a fixed size padding,
> >
> > It doesn't look like netdev_alloc_skb_ip_align() is the right thing in
> > this regard.
> >
>
> OK, time to have a long explanation :
>
> netdev_alloc_skb_ip_align() is doing the right thing, but it seems you
> guys insist to invent a new private stuff.
>
> I am only wondering if you really know why you do this.
>
> Many drivers do have same requirements, so every driver should reinvent
> the wheel ? Really this is beyond me.
>
> Original code was aligning the buffer on a 32 bytes boundary (because of
> a hardware requirement on NIC, I only trust original code on this).
>
> Then you want to change this to align buffer on this 32 bytes boundary
> PLUS 2. What is this kind of new requirement ?
>
> 1) Hardware requirement really changed that much. (firmware changed on
> NIC). If not using this new alignement, NIC doesnt work at all.
>
> 2) or Microblaze arch requires that IP header is aligned on a word
> boundary to avoid unaligned traps in IP stack ? (like many arches)
Yes.
>
> If this is the latest requirement, then use standard mechanism.
> skb data is naturally aligned on L1_CACHE_SIZE + SKB_PAD boundaries.
> (32 bytes alignment)
>
> netdev_alloc_skb_ip_align()() then skips 2 bytes to make skb data
> aligned so that 2 + 14 (sizeof eth header) = 16 : IP header is aligned
> (modulo 16)
>
> It just works. If not, we should correct it, please fill a bug report.
>
Trying it now, thanks for the help and patience :)
-- John
> Thanks
>
>
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
^ permalink raw reply
* [PATCH v3] Add Mergeable receive buffer support to vhost_net
From: David L Stevens @ 2010-04-06 20:32 UTC (permalink / raw)
To: Michael S. Tsirkin; +Cc: kvm, netdev, rusty, virtualization
This patch adds support for the Mergeable Receive Buffers feature to
vhost_net.
+-DLS
Changes from previous revision:
1) renamed:
vhost_discard_vq_desc -> vhost_discard_desc
vhost_get_heads -> vhost_get_desc_n
vhost_get_vq_desc -> vhost_get_desc
2) added heads as argument to ghost_get_desc_n
3) changed "vq->heads" from iovec to vring_used_elem, removed casts
4) changed vhost_add_used to do multiple elements in a single
copy_to_user,
or two when we wrap the ring.
5) removed rxmaxheadcount and available buffer checks in favor of
running until
an allocation failure, but making sure we break the loop if we get
two in a row, indicating we have at least 1 buffer, but not enough
for the current receive packet
6) restore non-vnet header handling
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>
diff -ruNp net-next-p0/drivers/vhost/net.c
net-next-v3/drivers/vhost/net.c
--- net-next-p0/drivers/vhost/net.c 2010-03-22 12:04:38.000000000 -0700
+++ net-next-v3/drivers/vhost/net.c 2010-04-06 12:54:56.000000000 -0700
@@ -130,9 +130,8 @@ static void handle_tx(struct vhost_net *
hdr_size = vq->hdr_size;
for (;;) {
- head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
- ARRAY_SIZE(vq->iov),
- &out, &in,
+ head = vhost_get_desc(&net->dev, vq, vq->iov,
+ ARRAY_SIZE(vq->iov), &out, &in,
NULL, NULL);
/* Nothing new? Wait for eventfd to tell us they refilled. */
if (head == vq->num) {
@@ -167,8 +166,15 @@ static void handle_tx(struct vhost_net *
/* TODO: Check specific error and bomb out unless ENOBUFS? */
err = sock->ops->sendmsg(NULL, sock, &msg, len);
if (unlikely(err < 0)) {
- vhost_discard_vq_desc(vq);
- tx_poll_start(net, sock);
+ if (err == -EAGAIN) {
+ vhost_discard_desc(vq, 1);
+ tx_poll_start(net, sock);
+ } else {
+ vq_err(vq, "sendmsg: errno %d\n", -err);
+ /* drop packet; do not discard/resend */
+ vhost_add_used_and_signal(&net->dev, vq, head,
+ 0);
+ }
break;
}
if (err != len)
@@ -186,12 +192,25 @@ static void handle_tx(struct vhost_net *
unuse_mm(net->dev.mm);
}
+static int vhost_head_len(struct sock *sk)
+{
+ struct sk_buff *head;
+ int len = 0;
+
+ lock_sock(sk);
+ head = skb_peek(&sk->sk_receive_queue);
+ if (head)
+ len = head->len;
+ release_sock(sk);
+ return len;
+}
+
/* Expects to be always run from workqueue - which acts as
* read-size critical section for our kind of RCU. */
static void handle_rx(struct vhost_net *net)
{
struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_RX];
- unsigned head, out, in, log, s;
+ unsigned in, log, s;
struct vhost_log *vq_log;
struct msghdr msg = {
.msg_name = NULL,
@@ -202,13 +221,14 @@ static void handle_rx(struct vhost_net *
.msg_flags = MSG_DONTWAIT,
};
- struct virtio_net_hdr hdr = {
- .flags = 0,
- .gso_type = VIRTIO_NET_HDR_GSO_NONE
+ struct virtio_net_hdr_mrg_rxbuf hdr = {
+ .hdr.flags = 0,
+ .hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
};
+ int retries = 0;
size_t len, total_len = 0;
- int err;
+ int err, headcount, datalen;
size_t hdr_size;
struct socket *sock = rcu_dereference(vq->private_data);
if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue))
@@ -222,31 +242,25 @@ static void handle_rx(struct vhost_net *
vq_log = unlikely(vhost_has_feature(&net->dev, VHOST_F_LOG_ALL)) ?
vq->log : NULL;
- for (;;) {
- head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
- ARRAY_SIZE(vq->iov),
- &out, &in,
- vq_log, &log);
+ while ((datalen = vhost_head_len(sock->sk))) {
+ headcount = vhost_get_desc_n(vq, vq->heads, datalen, &in,
+ vq_log, &log);
/* OK, now we need to know about added descriptors. */
- if (head == vq->num) {
- if (unlikely(vhost_enable_notify(vq))) {
+ if (!headcount) {
+ if (retries == 0 && unlikely(vhost_enable_notify(vq))) {
/* They have slipped one in as we were
* doing that: check again. */
vhost_disable_notify(vq);
+ retries++;
continue;
}
+ retries = 0;
/* Nothing new? Wait for eventfd to tell us
* they refilled. */
break;
}
/* We don't need to be notified again. */
- if (out) {
- vq_err(vq, "Unexpected descriptor format for RX: "
- "out %d, int %d\n",
- out, in);
- break;
- }
- /* Skip header. TODO: support TSO/mergeable rx buffers. */
+ /* Skip header. TODO: support TSO. */
s = move_iovec_hdr(vq->iov, vq->hdr, hdr_size, in);
msg.msg_iovlen = in;
len = iov_length(vq->iov, in);
@@ -261,14 +275,33 @@ static void handle_rx(struct vhost_net *
len, MSG_DONTWAIT | MSG_TRUNC);
/* TODO: Check specific error and bomb out unless EAGAIN? */
if (err < 0) {
- vhost_discard_vq_desc(vq);
+ vhost_discard_desc(vq, headcount);
break;
}
/* TODO: Should check and handle checksum. */
+ if (vhost_has_feature(&net->dev, VIRTIO_NET_F_MRG_RXBUF)) {
+ struct virtio_net_hdr_mrg_rxbuf *vhdr =
+ (struct virtio_net_hdr_mrg_rxbuf *)
+ vq->iov[0].iov_base;
+ /* add num_buffers */
+ if (vhost_has_feature(&net->dev,
+ VHOST_NET_F_VIRTIO_NET_HDR))
+ hdr.num_buffers = headcount;
+ else if (vq->iov[0].iov_len < sizeof(*vhdr)) {
+ vq_err(vq, "tiny buffers < %d unsupported",
+ vq->iov[0].iov_len);
+ vhost_discard_desc(vq, headcount);
+ break;
+ } else if (put_user(headcount, &vhdr->num_buffers)) {
+ vq_err(vq, "Failed num_buffers write");
+ vhost_discard_desc(vq, headcount);
+ break;
+ }
+ }
if (err > len) {
pr_err("Discarded truncated rx packet: "
" len %d > %zd\n", err, len);
- vhost_discard_vq_desc(vq);
+ vhost_discard_desc(vq, headcount);
continue;
}
len = err;
@@ -279,7 +312,7 @@ static void handle_rx(struct vhost_net *
break;
}
len += hdr_size;
- vhost_add_used_and_signal(&net->dev, vq, head, len);
+ vhost_add_used_and_signal_n(&net->dev, vq, vq->heads, headcount);
if (unlikely(vq_log))
vhost_log_write(vq, vq_log, log, len);
total_len += len;
@@ -560,9 +593,14 @@ done:
static int vhost_net_set_features(struct vhost_net *n, u64 features)
{
- size_t hdr_size = features & (1 << VHOST_NET_F_VIRTIO_NET_HDR) ?
- sizeof(struct virtio_net_hdr) : 0;
+ size_t hdr_size = 0;
int i;
+
+ if (features & (1 << VHOST_NET_F_VIRTIO_NET_HDR)) {
+ hdr_size = sizeof(struct virtio_net_hdr);
+ if (features & (1 << VIRTIO_NET_F_MRG_RXBUF))
+ hdr_size = sizeof(struct virtio_net_hdr_mrg_rxbuf);
+ }
mutex_lock(&n->dev.mutex);
if ((features & (1 << VHOST_F_LOG_ALL)) &&
!vhost_log_access_ok(&n->dev)) {
diff -ruNp net-next-p0/drivers/vhost/vhost.c
net-next-v3/drivers/vhost/vhost.c
--- net-next-p0/drivers/vhost/vhost.c 2010-03-22 12:04:38.000000000
-0700
+++ net-next-v3/drivers/vhost/vhost.c 2010-04-06 12:57:51.000000000
-0700
@@ -856,6 +856,47 @@ static unsigned get_indirect(struct vhos
return 0;
}
+/* This is a multi-buffer version of vhost_get_vq_desc
+ * @vq - the relevant virtqueue
+ * datalen - data length we'll be reading
+ * @iovcount - returned count of io vectors we fill
+ * @log - vhost log
+ * @log_num - log offset
+ * returns number of buffer heads allocated, 0 on error
+ */
+int vhost_get_desc_n(struct vhost_virtqueue *vq, struct vring_used_elem
*heads,
+ int datalen, int *iovcount, struct vhost_log *log,
+ unsigned int *log_num)
+{
+ int out, in;
+ int seg = 0; /* iov index */
+ int hc = 0; /* head count */
+
+ while (datalen > 0) {
+ if (hc >= VHOST_NET_MAX_SG)
+ goto err;
+ heads[hc].id = vhost_get_desc(vq->dev, vq, vq->iov+seg,
+ ARRAY_SIZE(vq->iov)-seg, &out,
+ &in, log, log_num);
+ if (heads[hc].id == vq->num)
+ goto err;
+ if (out || in <= 0) {
+ vq_err(vq, "unexpected descriptor format for RX: "
+ "out %d, in %d\n", out, in);
+ goto err;
+ }
+ heads[hc].len = iov_length(vq->iov+seg, in);
+ datalen -= heads[hc].len;
+ hc++;
+ seg += in;
+ }
+ *iovcount = seg;
+ return hc;
+err:
+ vhost_discard_desc(vq, hc);
+ return 0;
+}
+
/* This looks in the virtqueue and for the first available buffer, and
converts
* it to an iovec for convenient access. Since descriptors consist of
some
* number of output then some number of input descriptors, it's
actually two
@@ -863,7 +904,7 @@ static unsigned get_indirect(struct vhos
*
* This function returns the descriptor number found, or vq->num (which
* is never a valid descriptor number) if none was found. */
-unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct
vhost_virtqueue *vq,
+unsigned vhost_get_desc(struct vhost_dev *dev, struct vhost_virtqueue
*vq,
struct iovec iov[], unsigned int iov_size,
unsigned int *out_num, unsigned int *in_num,
struct vhost_log *log, unsigned int *log_num)
@@ -981,31 +1022,42 @@ unsigned vhost_get_vq_desc(struct vhost_
}
/* Reverse the effect of vhost_get_vq_desc. Useful for error handling.
*/
-void vhost_discard_vq_desc(struct vhost_virtqueue *vq)
+void vhost_discard_desc(struct vhost_virtqueue *vq, int n)
{
- vq->last_avail_idx--;
+ vq->last_avail_idx -= n;
}
/* After we've used one of their buffers, we tell them about it. We'll
then
* want to notify the guest, using eventfd. */
-int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int
len)
+int vhost_add_used(struct vhost_virtqueue *vq, struct vring_used_elem
*heads,
+ int count)
{
struct vring_used_elem *used;
+ int start, n;
+
+ if (count <= 0)
+ return -EINVAL;
- /* The virtqueue contains a ring of used buffers. Get a pointer to
the
- * next entry in that used ring. */
- used = &vq->used->ring[vq->last_used_idx % vq->num];
- if (put_user(head, &used->id)) {
- vq_err(vq, "Failed to write used id");
+ start = vq->last_used_idx % vq->num;
+ if (vq->num - start < count)
+ n = vq->num - start;
+ else
+ n = count;
+ used = vq->used->ring + start;
+ if (copy_to_user(used, heads, sizeof(heads[0])*n)) {
+ vq_err(vq, "Failed to write used");
return -EFAULT;
}
- if (put_user(len, &used->len)) {
- vq_err(vq, "Failed to write used len");
- return -EFAULT;
+ if (n < count) { /* wrapped the ring */
+ used = vq->used->ring;
+ if (copy_to_user(used, heads+n, sizeof(heads[0])*(count-n))) {
+ vq_err(vq, "Failed to write used");
+ return -EFAULT;
+ }
}
/* Make sure buffer is written before we update index. */
smp_wmb();
- if (put_user(vq->last_used_idx + 1, &vq->used->idx)) {
+ if (put_user(vq->last_used_idx+count, &vq->used->idx)) {
vq_err(vq, "Failed to increment used idx");
return -EFAULT;
}
@@ -1023,7 +1075,7 @@ int vhost_add_used(struct vhost_virtqueu
if (vq->log_ctx)
eventfd_signal(vq->log_ctx, 1);
}
- vq->last_used_idx++;
+ vq->last_used_idx += count;
return 0;
}
@@ -1049,10 +1101,23 @@ void vhost_signal(struct vhost_dev *dev,
/* And here's the combo meal deal. Supersize me! */
void vhost_add_used_and_signal(struct vhost_dev *dev,
- struct vhost_virtqueue *vq,
- unsigned int head, int len)
+ struct vhost_virtqueue *vq, unsigned int id,
+ int len)
+{
+ struct vring_used_elem head;
+
+ head.id = id;
+ head.len = len;
+ vhost_add_used(vq, &head, 1);
+ vhost_signal(dev, vq);
+}
+
+/* multi-buffer version of vhost_add_used_and_signal */
+void vhost_add_used_and_signal_n(struct vhost_dev *dev,
+ struct vhost_virtqueue *vq,
+ struct vring_used_elem *heads, int count)
{
- vhost_add_used(vq, head, len);
+ vhost_add_used(vq, heads, count);
vhost_signal(dev, vq);
}
diff -ruNp net-next-p0/drivers/vhost/vhost.h
net-next-v3/drivers/vhost/vhost.h
--- net-next-p0/drivers/vhost/vhost.h 2010-03-22 12:04:38.000000000
-0700
+++ net-next-v3/drivers/vhost/vhost.h 2010-04-05 20:33:57.000000000
-0700
@@ -85,6 +85,7 @@ struct vhost_virtqueue {
struct iovec iov[VHOST_NET_MAX_SG];
struct iovec hdr[VHOST_NET_MAX_SG];
size_t hdr_size;
+ struct vring_used_elem heads[VHOST_NET_MAX_SG];
/* We use a kind of RCU to access private pointer.
* All readers access it from workqueue, which makes it possible to
* flush the workqueue instead of synchronize_rcu. Therefore readers
do
@@ -120,16 +121,22 @@ long vhost_dev_ioctl(struct vhost_dev *,
int vhost_vq_access_ok(struct vhost_virtqueue *vq);
int vhost_log_access_ok(struct vhost_dev *);
-unsigned vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue
*,
+int vhost_get_desc_n(struct vhost_virtqueue *, struct vring_used_elem
*heads,
+ int datalen, int *iovcount, struct vhost_log *log,
+ unsigned int *log_num);
+unsigned vhost_get_desc(struct vhost_dev *, struct vhost_virtqueue *,
struct iovec iov[], unsigned int iov_count,
unsigned int *out_num, unsigned int *in_num,
struct vhost_log *log, unsigned int *log_num);
-void vhost_discard_vq_desc(struct vhost_virtqueue *);
+void vhost_discard_desc(struct vhost_virtqueue *, int);
-int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int
len);
-void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *);
+int vhost_add_used(struct vhost_virtqueue *, struct vring_used_elem
*heads,
+ int count);
void vhost_add_used_and_signal(struct vhost_dev *, struct
vhost_virtqueue *,
- unsigned int head, int len);
+ unsigned int id, int len);
+void vhost_add_used_and_signal_n(struct vhost_dev *, struct
vhost_virtqueue *,
+ struct vring_used_elem *heads, int count);
+void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *);
void vhost_disable_notify(struct vhost_virtqueue *);
bool vhost_enable_notify(struct vhost_virtqueue *);
@@ -149,7 +156,8 @@ enum {
VHOST_FEATURES = (1 << VIRTIO_F_NOTIFY_ON_EMPTY) |
(1 << VIRTIO_RING_F_INDIRECT_DESC) |
(1 << VHOST_F_LOG_ALL) |
- (1 << VHOST_NET_F_VIRTIO_NET_HDR),
+ (1 << VHOST_NET_F_VIRTIO_NET_HDR) |
+ (1 << VIRTIO_NET_F_MRG_RXBUF),
};
static inline int vhost_has_feature(struct vhost_dev *dev, int bit)
^ permalink raw reply
* [PATCH net-next] via-velocity: remove private #define
From: François Romieu @ 2010-04-06 20:58 UTC (permalink / raw)
To: David Miller
Cc: netdev, Simon Kagstrom, Jan Ceuleers, Séguier Régis
Registers and their bits from mii.h. Courtesy from ed.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
---
drivers/net/via-velocity.c | 114 ++++++++++++++++++++++----------------------
drivers/net/via-velocity.h | 77 +----------------------------
2 files changed, 60 insertions(+), 131 deletions(-)
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 91f3b84..078903f 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -719,30 +719,30 @@ static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
u32 status = 0;
u16 ANAR;
- if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
+ if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs))
status |= VELOCITY_LINK_FAIL;
- if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs))
status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
- else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
+ else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs))
status |= (VELOCITY_SPEED_1000);
else {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if (ANAR & ANAR_TXFD)
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if (ANAR & ADVERTISE_100FULL)
status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
- else if (ANAR & ANAR_TX)
+ else if (ANAR & ADVERTISE_100HALF)
status |= VELOCITY_SPEED_100;
- else if (ANAR & ANAR_10FD)
+ else if (ANAR & ADVERTISE_10FULL)
status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
else
status |= (VELOCITY_SPEED_10);
}
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
- == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
- if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+ == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
status |= VELOCITY_AUTONEG_ENABLE;
}
}
@@ -801,23 +801,23 @@ static void set_mii_flow_control(struct velocity_info *vptr)
/*Enable or Disable PAUSE in ANAR */
switch (vptr->options.flow_cntl) {
case FLOW_CNTL_TX:
- MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
break;
case FLOW_CNTL_RX:
- MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
break;
case FLOW_CNTL_TX_RX:
- MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
break;
case FLOW_CNTL_DISABLE:
- MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
break;
default:
break;
@@ -832,10 +832,10 @@ static void set_mii_flow_control(struct velocity_info *vptr)
*/
static void mii_set_auto_on(struct velocity_info *vptr)
{
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
- MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs))
+ MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
else
- MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs);
}
static u32 check_connection_type(struct mac_regs __iomem *regs)
@@ -860,11 +860,11 @@ static u32 check_connection_type(struct mac_regs __iomem *regs)
else
status |= VELOCITY_SPEED_100;
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
- == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
- if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+ == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
status |= VELOCITY_AUTONEG_ENABLE;
}
}
@@ -905,7 +905,7 @@ static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
*/
if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
/*
* If connection type is AUTO
@@ -915,9 +915,9 @@ static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
/* clear force MAC mode bit */
BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
/* set duplex mode of MAC according to duplex mode of MII */
- MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
- MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs);
/* enable AUTO-NEGO mode */
mii_set_auto_on(vptr);
@@ -952,31 +952,31 @@ static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
}
- MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
else
BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
- /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
- velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
- ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
+ /* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */
+ velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR);
+ ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF));
if (mii_status & VELOCITY_SPEED_100) {
if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ANAR_TXFD;
+ ANAR |= ADVERTISE_100FULL;
else
- ANAR |= ANAR_TX;
+ ANAR |= ADVERTISE_100HALF;
} else {
if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ANAR_10FD;
+ ANAR |= ADVERTISE_10FULL;
else
- ANAR |= ANAR_10;
+ ANAR |= ADVERTISE_10HALF;
}
- velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
+ velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR);
/* enable AUTO-NEGO mode */
mii_set_auto_on(vptr);
- /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
+ /* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */
}
/* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
/* vptr->mii_status=check_connection_type(vptr->mac_regs); */
@@ -1178,36 +1178,36 @@ static void mii_init(struct velocity_info *vptr, u32 mii_status)
/*
* Reset to hardware default
*/
- MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
/*
* Turn on ECHODIS bit in NWay-forced full mode and turn it
* off it in NWay-forced half mode for NWay-forced v.s.
* legacy-forced issue.
*/
if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
/*
* Turn on Link/Activity LED enable bit for CIS8201
*/
- MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
+ MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
break;
case PHYID_VT3216_32BIT:
case PHYID_VT3216_64BIT:
/*
* Reset to hardware default
*/
- MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
/*
* Turn on ECHODIS bit in NWay-forced full mode and turn it
* off it in NWay-forced half mode for NWay-forced v.s.
* legacy-forced issue
*/
if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
break;
case PHYID_MARVELL_1000:
@@ -1219,15 +1219,15 @@ static void mii_init(struct velocity_info *vptr, u32 mii_status)
/*
* Reset to hardware default
*/
- MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
break;
default:
;
}
- velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
- if (BMCR & BMCR_ISO) {
- BMCR &= ~BMCR_ISO;
- velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
+ velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR);
+ if (BMCR & BMCR_ISOLATE) {
+ BMCR &= ~BMCR_ISOLATE;
+ velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR);
}
}
@@ -2953,13 +2953,13 @@ static int velocity_set_wol(struct velocity_info *vptr)
if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
- MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
}
if (vptr->mii_status & VELOCITY_SPEED_1000)
- MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index ef4a0f6..c381911 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1240,86 +1240,16 @@ struct velocity_context {
u32 pattern[8];
};
-
-/*
- * MII registers.
- */
-
-
/*
* Registers in the MII (offset unit is WORD)
*/
-#define MII_REG_BMCR 0x00 // physical address
-#define MII_REG_BMSR 0x01 //
-#define MII_REG_PHYID1 0x02 // OUI
-#define MII_REG_PHYID2 0x03 // OUI + Module ID + REV ID
-#define MII_REG_ANAR 0x04 //
-#define MII_REG_ANLPAR 0x05 //
-#define MII_REG_G1000CR 0x09 //
-#define MII_REG_G1000SR 0x0A //
-#define MII_REG_MODCFG 0x10 //
-#define MII_REG_TCSR 0x16 //
-#define MII_REG_PLED 0x1B //
-// NS, MYSON only
-#define MII_REG_PCR 0x17 //
-// ESI only
-#define MII_REG_PCSR 0x17 //
-#define MII_REG_AUXCR 0x1C //
-
// Marvell 88E1000/88E1000S
#define MII_REG_PSCR 0x10 // PHY specific control register
//
-// Bits in the BMCR register
-//
-#define BMCR_RESET 0x8000 //
-#define BMCR_LBK 0x4000 //
-#define BMCR_SPEED100 0x2000 //
-#define BMCR_AUTO 0x1000 //
-#define BMCR_PD 0x0800 //
-#define BMCR_ISO 0x0400 //
-#define BMCR_REAUTO 0x0200 //
-#define BMCR_FDX 0x0100 //
-#define BMCR_SPEED1G 0x0040 //
-//
-// Bits in the BMSR register
-//
-#define BMSR_AUTOCM 0x0020 //
-#define BMSR_LNK 0x0004 //
-
-//
-// Bits in the ANAR register
-//
-#define ANAR_ASMDIR 0x0800 // Asymmetric PAUSE support
-#define ANAR_PAUSE 0x0400 // Symmetric PAUSE Support
-#define ANAR_T4 0x0200 //
-#define ANAR_TXFD 0x0100 //
-#define ANAR_TX 0x0080 //
-#define ANAR_10FD 0x0040 //
-#define ANAR_10 0x0020 //
-//
-// Bits in the ANLPAR register
-//
-#define ANLPAR_ASMDIR 0x0800 // Asymmetric PAUSE support
-#define ANLPAR_PAUSE 0x0400 // Symmetric PAUSE Support
-#define ANLPAR_T4 0x0200 //
-#define ANLPAR_TXFD 0x0100 //
-#define ANLPAR_TX 0x0080 //
-#define ANLPAR_10FD 0x0040 //
-#define ANLPAR_10 0x0020 //
-
-//
-// Bits in the G1000CR register
-//
-#define G1000CR_1000FD 0x0200 // PHY is 1000-T Full-duplex capable
-#define G1000CR_1000 0x0100 // PHY is 1000-T Half-duplex capable
-
-//
-// Bits in the G1000SR register
+// Bits in the Silicon revision register
//
-#define G1000SR_1000FD 0x0800 // LP PHY is 1000-T Full-duplex capable
-#define G1000SR_1000 0x0400 // LP PHY is 1000-T Half-duplex capable
#define TCSR_ECHODIS 0x2000 //
#define AUXCR_MDPPS 0x0004 //
@@ -1338,7 +1268,6 @@ struct velocity_context {
#define PHYID_REV_ID_MASK 0x0000000FUL
-#define PHYID_GET_PHY_REV_ID(i) ((i) & PHYID_REV_ID_MASK)
#define PHYID_GET_PHY_ID(i) ((i) & ~PHYID_REV_ID_MASK)
#define MII_REG_BITS_ON(x,i,p) do {\
@@ -1362,8 +1291,8 @@ struct velocity_context {
#define MII_GET_PHY_ID(p) ({\
u32 id;\
- velocity_mii_read((p),MII_REG_PHYID2,(u16 *) &id);\
- velocity_mii_read((p),MII_REG_PHYID1,((u16 *) &id)+1);\
+ velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\
+ velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\
(id);})
/*
--
1.6.6.1
^ permalink raw reply related
* Re: [PATCH net-next] via-velocity: remove private #define
From: David Miller @ 2010-04-06 21:25 UTC (permalink / raw)
To: romieu; +Cc: netdev, simon.kagstrom, jan.ceuleers, rseguier
In-Reply-To: <20100406205810.GA8077@electric-eye.fr.zoreil.com>
From: François Romieu <romieu@fr.zoreil.com>
Date: Tue, 6 Apr 2010 22:58:10 +0200
> Registers and their bits from mii.h. Courtesy from ed.
>
> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Applied, thanks a lot for doing this.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox