* Re: [PATCH] fragment: add fast path
From: David Miller @ 2010-06-14 1:18 UTC (permalink / raw)
To: xiaosuo; +Cc: kuznet, pekkas, jmorris, yoshfuji, kaber, netdev
In-Reply-To: <1276470995-21713-1-git-send-email-xiaosuo@gmail.com>
From: Changli Gao <xiaosuo@gmail.com>
Date: Mon, 14 Jun 2010 07:16:35 +0800
> As the fragments are usually in order,
In what universe does this happen "usually"?
Linux has been outputting fragments in reverse order for more than 10
years.
I'm not applying this patch.
^ permalink raw reply
* [PATCH] fragment: add fast path
From: Changli Gao @ 2010-06-13 23:16 UTC (permalink / raw)
To: David S. Miller
Cc: Alexey Kuznetsov, Pekka Savola (ipv6), James Morris,
Hideaki YOSHIFUJI, Patrick McHardy, netdev, Changli Gao
add fast path
As the fragments are usually in order, it is likely the new fragments are
at the end of the inet_frag_queue. In the fast path, we check if the skb at the
end of the inet_frag_queue is the prev we expect.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
include/net/inet_frag.h | 1 +
net/ipv4/ip_fragment.c | 17 +++++++++++++++++
net/ipv6/reassembly.c | 16 ++++++++++++++++
3 files changed, 34 insertions(+)
diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h
index 39f2dc9..16ff29a 100644
--- a/include/net/inet_frag.h
+++ b/include/net/inet_frag.h
@@ -20,6 +20,7 @@ struct inet_frag_queue {
atomic_t refcnt;
struct timer_list timer; /* when will this queue expire? */
struct sk_buff *fragments; /* list of received fragments */
+ struct sk_buff *fragments_tail;
ktime_t stamp;
int len; /* total length of orig datagram */
int meat;
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 75347ea..d8c36d4 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -317,6 +317,7 @@ static int ip_frag_reinit(struct ipq *qp)
qp->q.len = 0;
qp->q.meat = 0;
qp->q.fragments = NULL;
+ qp->q.fragments_tail = NULL;
qp->iif = 0;
return 0;
@@ -389,6 +390,16 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb)
* in the chain of fragments so far. We must know where to put
* this fragment, right?
*/
+ prev = qp->q.fragments_tail;
+ if (prev) {
+ if (FRAG_CB(prev)->offset < offset) {
+ next = NULL;
+ goto found;
+ }
+ } else {
+ next = NULL;
+ goto found;
+ }
prev = NULL;
for (next = qp->q.fragments; next != NULL; next = next->next) {
if (FRAG_CB(next)->offset >= offset)
@@ -396,6 +407,7 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb)
prev = next;
}
+found:
/* We found where to put this one. Check for overlap with
* preceding fragment, and, if needed, align things so that
* any overlaps are eliminated.
@@ -454,6 +466,8 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb)
/* Insert this fragment in the chain of fragments. */
skb->next = next;
+ if (!next)
+ qp->q.fragments_tail = skb;
if (prev)
prev->next = skb;
else
@@ -507,6 +521,8 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
goto out_nomem;
fp->next = head->next;
+ if (!fp->next)
+ qp->q.fragments_tail = fp;
prev->next = fp;
skb_morph(head, qp->q.fragments);
@@ -578,6 +594,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
iph->tot_len = htons(len);
IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
qp->q.fragments = NULL;
+ qp->q.fragments_tail = NULL;
return 0;
out_nomem:
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 6d4292f..dc15624 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -336,6 +336,16 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
* in the chain of fragments so far. We must know where to put
* this fragment, right?
*/
+ prev = fq->q.fragments_tail;
+ if (prev) {
+ if (FRAG6_CB(prev)->offset < offset) {
+ next = NULL;
+ goto found;
+ }
+ } else {
+ next = NULL;
+ goto found;
+ }
prev = NULL;
for(next = fq->q.fragments; next != NULL; next = next->next) {
if (FRAG6_CB(next)->offset >= offset)
@@ -343,6 +353,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
prev = next;
}
+found:
/* We found where to put this one. Check for overlap with
* preceding fragment, and, if needed, align things so that
* any overlaps are eliminated.
@@ -400,6 +411,8 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
/* Insert this fragment in the chain of fragments. */
skb->next = next;
+ if (!next)
+ fq->q.fragments_tail = skb;
if (prev)
prev->next = skb;
else
@@ -466,6 +479,8 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
goto out_oom;
fp->next = head->next;
+ if (!fp->next)
+ fq->q.fragments_tail = fp;
prev->next = fp;
skb_morph(head, fq->q.fragments);
@@ -553,6 +568,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
rcu_read_unlock();
fq->q.fragments = NULL;
+ fq->q.fragments_tail = NULL;
return 1;
out_oversize:
^ permalink raw reply related
* Re: [net-next PATCH] bnx2x: Fix link problem with some DACs
From: David Miller @ 2010-06-14 0:52 UTC (permalink / raw)
To: ole; +Cc: yanivr, netdev
In-Reply-To: <4C154D5B.8000004@ans.pl>
From: Krzysztof Olędzki <ole@ans.pl>
Date: Sun, 13 Jun 2010 23:27:55 +0200
> On 2010-06-13 13:43, Yaniv Rosner wrote:
>> Change 2wire transfer rate of SFP+ module EEPROM from 400Khz to 100Khz
>> since some DACs(direct attached cables) do not work at 400Khz.
>>
>> Reported-by: Krzysztof Oldzki <ole@ans.pl>
>> Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
>> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
>> ---
>> diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
>> index a22a7e0..9b15b64 100644
>> --- a/drivers/net/bnx2x_link.c
>> +++ b/drivers/net/bnx2x_link.c
>> @@ -4274,7 +4274,7 @@ static u8 bnx2x_ext_phy_init(struct link_params
>> *params, struct link_vars *vars)
>> ext_phy_addr,
>> MDIO_PMA_DEVAD,
>> MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR,
>> - 0xa001);
>> + 0xa101);
>>
>> /* Set TX PreEmphasis if needed */
>> if ((params->feature_config_flags&
>
> Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
>
> However, I believe the comment before this code should also be
> changed, because it is now: "Set 2-wire transfer rate to 400Khz since
> 100Khz
> is not operational ".
Agreed, Yaniv please update your patch.
^ permalink raw reply
* Re: mpd client timeouts (bisected) 2.6.35-rc3
From: David Miller @ 2010-06-14 0:14 UTC (permalink / raw)
To: markus
Cc: john.r.fastabend, linux-kernel, netdev, yanmin_zhang, alex.shi,
tim.c.chen
In-Reply-To: <20100613205922.GA1806@arch.tripp.de>
From: "markus@trippelsdorf.de" <markus@trippelsdorf.de>
Date: Sun, 13 Jun 2010 22:59:22 +0200
> On Sun, Jun 13, 2010 at 01:36:30PM -0700, John Fastabend wrote:
>> [PATCH] net: fix deliver_no_wcard regression on loopback device
>
> This solves the problem here. Thanks.
>
> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Thanks for testing.
^ permalink raw reply
* Re: mpd client timeouts (bisected) 2.6.35-rc3
From: David Miller @ 2010-06-14 0:14 UTC (permalink / raw)
To: eric.dumazet
Cc: john.r.fastabend, markus, linux-kernel, netdev, yanmin_zhang,
alex.shi, tim.c.chen
In-Reply-To: <1276462246.2448.17.camel@edumazet-laptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Sun, 13 Jun 2010 22:50:46 +0200
> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Eric, please never ACK a patch in the same mail in which you are
posting new patch. Patchwork won't add your ACK to the patchwork
entry you are ACK'ing because all of your text will go into a new
patchwork entry for the patch you are posting.
> BTW, David, it seems there is a double rxhash copy...
>
> [PATCH] net: rxhash already set in __copy_skb_header
>
> No need to copy rxhash again in __skb_clone()
>
> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
I'll apply this, thanks.
^ permalink raw reply
* Re: mpd client timeouts (bisected) 2.6.35-rc3
From: David Miller @ 2010-06-14 0:13 UTC (permalink / raw)
To: john.r.fastabend
Cc: markus, linux-kernel, netdev, yanmin_zhang, alex.shi, tim.c.chen
In-Reply-To: <4C15414E.5090201@intel.com>
From: John Fastabend <john.r.fastabend@intel.com>
Date: Sun, 13 Jun 2010 13:36:30 -0700
> Needed to set the wcard bit in copy_skb_header otherwise it will not
> be cleared when called from skb_clone. Which then hits the loopback
> device gets pushed into the rx path and is eventually dropped. The
> following patch fixes this. Hopefully, this is easy and fast enough
> for you Dave.
>
>
> [PATCH] net: fix deliver_no_wcard regression on loopback device
>
> deliver_no_wcard is not being set in skb_copy_header.
> In the skb_cloned case it is not being cleared and
> may cause the skb to be dropped when the loopback device
> pushes it back up the stack.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Applied, but your email client corrupted this patch in many
ways. Please correct this for next time, thanks.
^ permalink raw reply
* [PATCH 0/1] Bluetooth: hidp: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE
From: Alan Ott @ 2010-06-13 22:18 UTC (permalink / raw)
To: Marcel Holtmann, David S. Miller, Jiri Kosina, Michael Poole,
Bastien Nocera
This patch adds support to the bluetooth hidp module for getting and
setting FEATURE reports from hidraw, as requested by Jiri Kosina. This
patch depends on the patch named:
[PATCH v2] HID: Add Support for Setting and Getting Feature Reports
from hidraw
I have a couple of concerns with this patch, which I hope someone here
can clarify and/or help me with.
1. Is it ok to use test_bit()/set_bit()/clear_bit() on session->flags,
when other parts in the code may not be using these functions to access
it? This currently isn't a problem because the other code which uses
flags only sets bits at initialization time (and deletion time). best I
can tell, flags is never actually used or read other than by my new code
(using the *_bit() functions). The solution here may be to change the
other code to use the *_bit() functions to access flags.
2. Is the loop in hidp_get_raw_report() sufficient without a mutex,
since I'm synchronizing with the atomic call to test_bit() (and
clear_bit())? I have convinced myself that in this case, with one
reader, and one writer, to one pointer, synchronized with
wait_event_interruptible_timeout() and atomic access through test_bit(),
that a mutex is not needed.
3. A blocking, synchronous GET_REPORT transfer was easy when I
implemented this for USB because data is both sent and received as part
of a single control transfer. Because of the nature of Bluetooth
however, where it is viewed more as an asynchronous network device, and
with hidraw allowing multiple handles to a single device to exist, there
could be a race when two handles call the hidp_get_raw_report() function
concurrently, requesting the same report. I've convinced myself that
this is not a problem, because since both callers requested the same
report, the worst that could happen is that one could get a report which
is slightly out of date.
Consider the following case:
1. Client 1 requests report (Userspace call to HIDIOCGFEATURE)
2. Client 2 requests report (Userspace call to HIDIOCGFEATURE)
3. Client 1's report is returned, and delivered to BOTH clients
4. Client 2's report is returned (and discarded)
Note here that Client 1's report and Client 2's report are the same
report, ie: they reflect the state of the same data on the device, just
at different times. In this case, they are indeed exactly the same data,
but consider this case:
1. Client 1 requests report (Userspace call to HIDIOCGFEATURE)
2. Client 2 SETS report (Userspace call to HIDIOCSFEATURE)
2. Client 2 requests report (Userspace call to HIDIOCGFEATURE)
3. Client 1's report is returned, and delivered to Clients 1 and 2
4. Client 2's report is returned
In this case, client 2 receives OLD data (since it set new data, and the
call to write the reports is currently not synchronous). To make writes
synchronous, we'd run into the same problem, of two writes happening
concurrently, and the 2nd one receiving the ACK from the first one.
The questions here are:
1. Is this a problem? It's only an issues if two handles (in two
separate threads) are reading and writing the device concurrently. I'd
expect that there would be bigger problems in this case than receiving
an old report.
2. If this is a problem, is there a way to synchronize on the control
socket for the device (as opposed to just this session)? In this case
GET_REPORT and SET_REPORT would lock access to the control socket (for
all clients accessing the device) while they are active.
Your feedback is most appreciated,
Alan.
^ permalink raw reply
* [PATCH 1/1] Bluetooth: hidp: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE
From: Alan Ott @ 2010-06-13 22:20 UTC (permalink / raw)
To: Marcel Holtmann, David S Miller, Jiri Kosina, Michael Poole,
Bastien Nocera
Cc: Alan Ott
This patch adds support or getting and setting feature reports for bluetooth
HID devices from HIDRAW.
Signed-off-by: Alan Ott <alan@signal11.us>
---
net/bluetooth/hidp/core.c | 121 +++++++++++++++++++++++++++++++++++++++++++--
net/bluetooth/hidp/hidp.h | 8 +++
2 files changed, 125 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index bfe641b..0f068a0 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -36,6 +36,7 @@
#include <linux/file.h>
#include <linux/init.h>
#include <linux/wait.h>
+#include <linux/mutex.h>
#include <net/sock.h>
#include <linux/input.h>
@@ -313,6 +314,93 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep
return hidp_queue_report(session, buf, rsize);
}
+static int hidp_get_raw_report(struct hid_device *hid,
+ unsigned char report_number,
+ unsigned char *data, size_t count,
+ unsigned char report_type)
+{
+ struct hidp_session *session = hid->driver_data;
+ struct sk_buff *skb;
+ size_t len;
+ int numbered_reports = hid->report_enum[report_type].numbered;
+
+ switch (report_type) {
+ case HID_FEATURE_REPORT:
+ report_type = HIDP_TRANS_GET_REPORT | HIDP_DATA_RTYPE_FEATURE;
+ break;
+ case HID_INPUT_REPORT:
+ report_type = HIDP_TRANS_GET_REPORT | HIDP_DATA_RTYPE_INPUT;
+ break;
+ case HID_OUTPUT_REPORT:
+ report_type = HIDP_TRANS_GET_REPORT | HIDP_DATA_RTYPE_OUPUT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mutex_lock_interruptible(&session->report_mutex))
+ return -ERESTARTSYS;
+
+ /* Set up our wait, and send the report request to the device. */
+ session->waiting_report_type = report_type & HIDP_DATA_RTYPE_MASK;
+ session->waiting_report_number = numbered_reports ? report_number : -1;
+ set_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
+ data[0] = report_number;
+ if (hidp_send_ctrl_message(hid->driver_data, report_type, data, 1))
+ goto err_eio;
+
+ /* Wait for the return of the report. The returned report
+ gets put in session->report_return. */
+ while (test_bit(HIDP_WAITING_FOR_RETURN, &session->flags)) {
+ int res;
+
+ res = wait_event_interruptible_timeout(session->report_queue,
+ !test_bit(HIDP_WAITING_FOR_RETURN, &session->flags),
+ 5*HZ);
+ if (res == 0) {
+ /* timeout */
+ goto err_eio;
+ }
+ if (res < 0) {
+ /* signal */
+ goto err_restartsys;
+ }
+ }
+
+ skb = session->report_return;
+ if (skb) {
+ if (numbered_reports) {
+ /* Strip off the report number. */
+ size_t rpt_len = skb->len-1;
+ len = rpt_len < count ? rpt_len : count;
+ memcpy(data, skb->data+1, len);
+ } else {
+ len = skb->len < count ? skb->len : count;
+ memcpy(data, skb->data, len);
+ }
+
+ kfree_skb(skb);
+ session->report_return = NULL;
+ } else {
+ /* Device returned a HANDSHAKE, indicating protocol error. */
+ len = -EIO;
+ }
+
+ clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
+ mutex_unlock(&session->report_mutex);
+
+ return len;
+
+err_restartsys:
+ clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
+ mutex_unlock(&session->report_mutex);
+ return -ERESTARTSYS;
+err_eio:
+ clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
+ mutex_unlock(&session->report_mutex);
+ return -EIO;
+}
+
static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
unsigned char report_type)
{
@@ -367,6 +455,10 @@ static void hidp_process_handshake(struct hidp_session *session,
case HIDP_HSHK_ERR_INVALID_REPORT_ID:
case HIDP_HSHK_ERR_UNSUPPORTED_REQUEST:
case HIDP_HSHK_ERR_INVALID_PARAMETER:
+ if (test_bit(HIDP_WAITING_FOR_RETURN, &session->flags)) {
+ clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
+ wake_up_interruptible(&session->report_queue);
+ }
/* FIXME: Call into SET_ GET_ handlers here */
break;
@@ -403,9 +495,11 @@ static void hidp_process_hid_control(struct hidp_session *session,
}
}
-static void hidp_process_data(struct hidp_session *session, struct sk_buff *skb,
+/* Returns true if the passed-in skb should be freed by the caller. */
+static int hidp_process_data(struct hidp_session *session, struct sk_buff *skb,
unsigned char param)
{
+ int done_with_skb = 1;
BT_DBG("session %p skb %p len %d param 0x%02x", session, skb, skb->len, param);
switch (param) {
@@ -417,7 +511,6 @@ static void hidp_process_data(struct hidp_session *session, struct sk_buff *skb,
if (session->hid)
hid_input_report(session->hid, HID_INPUT_REPORT, skb->data, skb->len, 0);
-
break;
case HIDP_DATA_RTYPE_OTHER:
@@ -429,12 +522,27 @@ static void hidp_process_data(struct hidp_session *session, struct sk_buff *skb,
__hidp_send_ctrl_message(session,
HIDP_TRANS_HANDSHAKE | HIDP_HSHK_ERR_INVALID_PARAMETER, NULL, 0);
}
+
+ if (test_bit(HIDP_WAITING_FOR_RETURN, &session->flags) &&
+ param == session->waiting_report_type) {
+ if (session->waiting_report_number < 0 ||
+ session->waiting_report_number == skb->data[0]) {
+ /* hidp_get_raw_report() is waiting on this report. */
+ session->report_return = skb;
+ done_with_skb = 0;
+ clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
+ wake_up_interruptible(&session->report_queue);
+ }
+ }
+
+ return done_with_skb;
}
static void hidp_recv_ctrl_frame(struct hidp_session *session,
struct sk_buff *skb)
{
unsigned char hdr, type, param;
+ int free_skb = 1;
BT_DBG("session %p skb %p len %d", session, skb, skb->len);
@@ -454,7 +562,7 @@ static void hidp_recv_ctrl_frame(struct hidp_session *session,
break;
case HIDP_TRANS_DATA:
- hidp_process_data(session, skb, param);
+ free_skb = hidp_process_data(session, skb, param);
break;
default:
@@ -463,7 +571,8 @@ static void hidp_recv_ctrl_frame(struct hidp_session *session,
break;
}
- kfree_skb(skb);
+ if (free_skb)
+ kfree_skb(skb);
}
static void hidp_recv_intr_frame(struct hidp_session *session,
@@ -797,6 +906,7 @@ static int hidp_setup_hid(struct hidp_session *session,
hid->dev.parent = hidp_get_device(session);
hid->ll_driver = &hidp_hid_driver;
+ hid->hid_get_raw_report = hidp_get_raw_report;
hid->hid_output_raw_report = hidp_output_raw_report;
err = hid_add_device(hid);
@@ -857,6 +967,9 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock,
skb_queue_head_init(&session->ctrl_transmit);
skb_queue_head_init(&session->intr_transmit);
+ mutex_init(&session->report_mutex);
+ init_waitqueue_head(&session->report_queue);
+
session->flags = req->flags & (1 << HIDP_BLUETOOTH_VENDOR_ID);
session->idle_to = req->idle_to;
diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h
index 8d934a1..00e71dd 100644
--- a/net/bluetooth/hidp/hidp.h
+++ b/net/bluetooth/hidp/hidp.h
@@ -80,6 +80,7 @@
#define HIDP_VIRTUAL_CABLE_UNPLUG 0
#define HIDP_BOOT_PROTOCOL_MODE 1
#define HIDP_BLUETOOTH_VENDOR_ID 9
+#define HIDP_WAITING_FOR_RETURN 10
struct hidp_connadd_req {
int ctrl_sock; // Connected control socket
@@ -154,6 +155,13 @@ struct hidp_session {
struct sk_buff_head ctrl_transmit;
struct sk_buff_head intr_transmit;
+ /* Used in hidp_get_raw_report() */
+ int waiting_report_type; /* HIDP_DATA_RTYPE_* */
+ int waiting_report_number; /* -1 for not numbered */
+ struct mutex report_mutex;
+ struct sk_buff *report_return;
+ wait_queue_head_t report_queue;
+
/* Report descriptor */
__u8 *rd_data;
uint rd_size;
--
1.7.0.4
^ permalink raw reply related
* Re: [PATCH] vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)
From: Ben Hutchings @ 2010-06-13 21:56 UTC (permalink / raw)
To: Pedro Garcia; +Cc: netdev
In-Reply-To: <c25bca517739ada31d698235c3a4d045@dondevamos.com>
I have no particular opinion on this change, but you need to read and
follow Documentation/SubmittingPatches.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* [PATCH net-next-2.6] syncookies: check decoded options against sysctl settings
From: Florian Westphal @ 2010-06-13 21:34 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal
Discard the ACK if we find options that do not match current sysctl
settings.
Previously it was possible to create a connection with sack,
wscale, etc. enabled even if the feature was disabled via sysctl.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
include/net/tcp.h | 2 +-
net/ipv4/syncookies.c | 25 +++++++++++++++++++------
net/ipv6/syncookies.c | 4 ++--
3 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 5731664..cca040e 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -464,7 +464,7 @@ extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb,
__u16 *mss);
extern __u32 cookie_init_timestamp(struct request_sock *req);
-extern void cookie_check_timestamp(struct tcp_options_received *tcp_opt);
+extern bool cookie_check_timestamp(struct tcp_options_received *tcp_opt);
/* From net/ipv6/syncookies.c */
extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb);
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 02bef6a..51b5662 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -230,23 +230,36 @@ static inline struct sock *get_cookie_sock(struct sock *sk, struct sk_buff *skb,
* The lowest 4 bits are for snd_wscale
* The next 4 lsb are for rcv_wscale
* The next lsb is for sack_ok
+ *
+ * return false if we decode an option that should not be.
*/
-void cookie_check_timestamp(struct tcp_options_received *tcp_opt)
+bool cookie_check_timestamp(struct tcp_options_received *tcp_opt)
{
/* echoed timestamp, 9 lowest bits contain options */
u32 options = tcp_opt->rcv_tsecr & TSMASK;
+ if (!tcp_opt->saw_tstamp) {
+ tcp_clear_options(tcp_opt);
+ return true;
+ }
+
+ if (!sysctl_tcp_timestamps)
+ return false;
+
tcp_opt->snd_wscale = options & 0xf;
options >>= 4;
tcp_opt->rcv_wscale = options & 0xf;
tcp_opt->sack_ok = (options >> 4) & 0x1;
- if (tcp_opt->sack_ok)
- tcp_sack_reset(tcp_opt);
+ if (tcp_opt->sack_ok && !sysctl_tcp_sack)
+ return false;
- if (tcp_opt->snd_wscale || tcp_opt->rcv_wscale)
+ if (tcp_opt->snd_wscale || tcp_opt->rcv_wscale) {
tcp_opt->wscale_ok = 1;
+ return sysctl_tcp_window_scaling != 0;
+ }
+ return true;
}
EXPORT_SYMBOL(cookie_check_timestamp);
@@ -281,8 +294,8 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
memset(&tcp_opt, 0, sizeof(tcp_opt));
tcp_parse_options(skb, &tcp_opt, &hash_location, 0);
- if (tcp_opt.saw_tstamp)
- cookie_check_timestamp(&tcp_opt);
+ if (!cookie_check_timestamp(&tcp_opt))
+ goto out;
ret = NULL;
req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 70d330f..c7ee574 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -180,8 +180,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
memset(&tcp_opt, 0, sizeof(tcp_opt));
tcp_parse_options(skb, &tcp_opt, &hash_location, 0);
- if (tcp_opt.saw_tstamp)
- cookie_check_timestamp(&tcp_opt);
+ if (!cookie_check_timestamp(&tcp_opt))
+ goto out;
ret = NULL;
req = inet6_reqsk_alloc(&tcp6_request_sock_ops);
--
1.6.4.4
^ permalink raw reply related
* [PATCH net-next-2.6] ipv6: syncookies: do not skip ->iif initialization
From: Florian Westphal @ 2010-06-13 21:29 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal, Glenn Griffin
When syncookies are in effect, req->iif is left uninitialized.
In case of e.g. link-local addresses the route lookup then fails
and no syn-ack is sent.
Rearrange things so ->iif is also initialized in the syncookie case.
want_cookie can only be true when the isn was zero, thus move the want_cookie
check into the "!isn" branch.
Cc: Glenn Griffin <ggriffin.kernel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/ipv6/tcp_ipv6.c | 13 +++++++------
1 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 5887141..f875345 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1272,10 +1272,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
if (!want_cookie)
TCP_ECN_create_request(req, tcp_hdr(skb));
- if (want_cookie) {
- isn = cookie_v6_init_sequence(sk, skb, &req->mss);
- req->cookie_ts = tmp_opt.tstamp_ok;
- } else if (!isn) {
+ if (!isn) {
if (ipv6_opt_accepted(sk, skb) ||
np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||
np->rxopt.bits.rxhlim || np->rxopt.bits.rxohlim) {
@@ -1288,8 +1285,12 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
if (!sk->sk_bound_dev_if &&
ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL)
treq->iif = inet6_iif(skb);
-
- isn = tcp_v6_init_sequence(skb);
+ if (!want_cookie) {
+ isn = tcp_v6_init_sequence(skb);
+ } else {
+ isn = cookie_v6_init_sequence(sk, skb, &req->mss);
+ req->cookie_ts = tmp_opt.tstamp_ok;
+ }
}
tcp_rsk(req)->snt_isn = isn;
--
1.6.4.4
^ permalink raw reply related
* Re: [net-next PATCH] bnx2x: Fix link problem with some DACs
From: Krzysztof Olędzki @ 2010-06-13 21:27 UTC (permalink / raw)
To: Yaniv Rosner; +Cc: davem, netdev
In-Reply-To: <1276429385.13056.13.camel@lb-tlvb-yanivr.il.broadcom.com>
On 2010-06-13 13:43, Yaniv Rosner wrote:
> Change 2wire transfer rate of SFP+ module EEPROM from 400Khz to 100Khz since some DACs(direct attached cables) do not work at 400Khz.
>
> Reported-by: Krzysztof Oldzki <ole@ans.pl>
> Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
> ---
> diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
> index a22a7e0..9b15b64 100644
> --- a/drivers/net/bnx2x_link.c
> +++ b/drivers/net/bnx2x_link.c
> @@ -4274,7 +4274,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
> ext_phy_addr,
> MDIO_PMA_DEVAD,
> MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR,
> - 0xa001);
> + 0xa101);
>
> /* Set TX PreEmphasis if needed */
> if ((params->feature_config_flags&
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
However, I believe the comment before this code should also be changed,
because it is now: "Set 2-wire transfer rate to 400Khz since 100Khz
is not operational ".
Thanks.
Best regards,
Krzysztof Olędzki
^ permalink raw reply
* Re: mpd client timeouts (bisected) 2.6.35-rc3
From: markus @ 2010-06-13 20:59 UTC (permalink / raw)
To: John Fastabend
Cc: David Miller, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org, yanmin_zhang, alex.shi, tim.c.chen
In-Reply-To: <4C15414E.5090201@intel.com>
On Sun, Jun 13, 2010 at 01:36:30PM -0700, John Fastabend wrote:
> John Fastabend wrote:
> >David Miller wrote:
> >>From: Markus Trippelsdorf <markus@trippelsdorf.de>
> >>Date: Sat, 12 Jun 2010 12:28:02 +0200
> >>
> >>>Commit 597a264b1a9c7e36d1728f677c66c5c1f7e3b837:
> >>>»net: deliver skbs on inactive slaves to exact matches«
> >>>
> >>>causes large timeouts when mpd clients try to connect to a locally
> >>>running mpd (music player demon) on my machine. This makes it
> >>>impossible to control mpd.
> >>>
> >>>I bisected this down to the commit mentioned above.
> >>>Reverting the commit from 2.6.35-rc3 also solves the problem.
> >>John, find an easy and fast way to fix this or else I am
> >>going to revert.
> >>
> >>Thanks.
> >
> >Looks like skbs are hitting loopback_xmit() with deliver_no_wcard
> >set. Then in the receive path these skbs are only delivered to
> >exact matches. Not sure why this bit is set here, I'll track this
> >down first thing tomorrow.
> >
> >Thanks,
> >John.
> >--
>
> Needed to set the wcard bit in copy_skb_header otherwise it will not
> be cleared when called from skb_clone. Which then hits the loopback
> device gets pushed into the rx path and is eventually dropped. The
> following patch fixes this. Hopefully, this is easy and fast enough
> for you Dave.
>
>
> [PATCH] net: fix deliver_no_wcard regression on loopback device
This solves the problem here. Thanks.
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
--
Markus
^ permalink raw reply
* Re: mpd client timeouts (bisected) 2.6.35-rc3
From: Eric Dumazet @ 2010-06-13 20:50 UTC (permalink / raw)
To: John Fastabend
Cc: David Miller, markus@trippelsdorf.de,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
yanmin_zhang, alex.shi, tim.c.chen
In-Reply-To: <4C15414E.5090201@intel.com>
Le dimanche 13 juin 2010 à 13:36 -0700, John Fastabend a écrit :
> John Fastabend wrote:
> > David Miller wrote:
> >> From: Markus Trippelsdorf <markus@trippelsdorf.de>
> >> Date: Sat, 12 Jun 2010 12:28:02 +0200
> >>
> >>> Commit 597a264b1a9c7e36d1728f677c66c5c1f7e3b837:
> >>> »net: deliver skbs on inactive slaves to exact matches«
> >>>
> >>> causes large timeouts when mpd clients try to connect to a locally
> >>> running mpd (music player demon) on my machine. This makes it
> >>> impossible to control mpd.
> >>>
> >>> I bisected this down to the commit mentioned above.
> >>> Reverting the commit from 2.6.35-rc3 also solves the problem.
> >> John, find an easy and fast way to fix this or else I am
> >> going to revert.
> >>
> >> Thanks.
> >
> > Looks like skbs are hitting loopback_xmit() with deliver_no_wcard set. Then in
> > the receive path these skbs are only delivered to exact matches. Not sure why
> > this bit is set here, I'll track this down first thing tomorrow.
> >
> > Thanks,
> > John.
> > --
>
> Needed to set the wcard bit in copy_skb_header otherwise it will not be cleared
> when called from skb_clone. Which then hits the loopback device gets pushed
> into the rx path and is eventually dropped. The following patch fixes this.
> Hopefully, this is easy and fast enough for you Dave.
>
>
> [PATCH] net: fix deliver_no_wcard regression on loopback device
>
> deliver_no_wcard is not being set in skb_copy_header.
> In the skb_cloned case it is not being cleared and
> may cause the skb to be dropped when the loopback device
> pushes it back up the stack.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
>
> net/core/skbuff.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> index 9f07e74..bcf2fa3 100644
> --- a/net/core/skbuff.c
> +++ b/net/core/skbuff.c
> @@ -532,6 +532,7 @@ static void __copy_skb_header(struct sk_buff *new, const
> struct sk_buff *old)
> new->ip_summed = old->ip_summed;
> skb_copy_queue_mapping(new, old);
> new->priority = old->priority;
> + new->deliver_no_wcard = old->deliver_no_wcard;
> #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
> new->ipvs_property = old->ipvs_property;
> #endif
> --
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
BTW, David, it seems there is a double rxhash copy...
[PATCH] net: rxhash already set in __copy_skb_header
No need to copy rxhash again in __skb_clone()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9f07e74..a58e63b 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -569,7 +569,6 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
C(len);
C(data_len);
C(mac_len);
- C(rxhash);
n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
n->cloned = 1;
n->nohdr = 0;
^ permalink raw reply related
* Re: mpd client timeouts (bisected) 2.6.35-rc3
From: John Fastabend @ 2010-06-13 20:36 UTC (permalink / raw)
To: David Miller, markus@trippelsdorf.de
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
yanmin_zhang, alex.shi, tim.c.chen
In-Reply-To: <4C149147.3080808@intel.com>
John Fastabend wrote:
> David Miller wrote:
>> From: Markus Trippelsdorf <markus@trippelsdorf.de>
>> Date: Sat, 12 Jun 2010 12:28:02 +0200
>>
>>> Commit 597a264b1a9c7e36d1728f677c66c5c1f7e3b837:
>>> »net: deliver skbs on inactive slaves to exact matches«
>>>
>>> causes large timeouts when mpd clients try to connect to a locally
>>> running mpd (music player demon) on my machine. This makes it
>>> impossible to control mpd.
>>>
>>> I bisected this down to the commit mentioned above.
>>> Reverting the commit from 2.6.35-rc3 also solves the problem.
>> John, find an easy and fast way to fix this or else I am
>> going to revert.
>>
>> Thanks.
>
> Looks like skbs are hitting loopback_xmit() with deliver_no_wcard set. Then in
> the receive path these skbs are only delivered to exact matches. Not sure why
> this bit is set here, I'll track this down first thing tomorrow.
>
> Thanks,
> John.
> --
Needed to set the wcard bit in copy_skb_header otherwise it will not be cleared
when called from skb_clone. Which then hits the loopback device gets pushed
into the rx path and is eventually dropped. The following patch fixes this.
Hopefully, this is easy and fast enough for you Dave.
[PATCH] net: fix deliver_no_wcard regression on loopback device
deliver_no_wcard is not being set in skb_copy_header.
In the skb_cloned case it is not being cleared and
may cause the skb to be dropped when the loopback device
pushes it back up the stack.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
---
net/core/skbuff.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9f07e74..bcf2fa3 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -532,6 +532,7 @@ static void __copy_skb_header(struct sk_buff *new, const
struct sk_buff *old)
new->ip_summed = old->ip_summed;
skb_copy_queue_mapping(new, old);
new->priority = old->priority;
+ new->deliver_no_wcard = old->deliver_no_wcard;
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
new->ipvs_property = old->ipvs_property;
#endif
^ permalink raw reply related
* Re: read(2) hangs waiting for data from a closed socket
From: Alex Riesen @ 2010-06-13 19:55 UTC (permalink / raw)
To: Markus Trippelsdorf; +Cc: netdev, Linux Kernel Mailing List
In-Reply-To: <20100613152348.GA1794@arch.tripp.de>
On Sun, Jun 13, 2010 at 17:23, Markus Trippelsdorf
<markus@trippelsdorf.de> wrote:
> Just revert commit 597a264b1a9c7e36d1728f677c66c5c1f7e3b837 for now.
> See also: http://lkml.org/lkml/2010/6/12/37
I see. Thanks! Reverting the commit indeed fixes the conky/hddtemp problem.
^ permalink raw reply
* [PATCH] vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)
From: Pedro Garcia @ 2010-06-13 19:20 UTC (permalink / raw)
To: netdev
Hi,
I am using kernel 2.6.26 in a linux box, and I have another box in the
network using 802.1p (priority tagging, but no VLAN).
Without the 8021q module loaded in the kernel, all 802.1p packets are
silently discarded (probably as expected, as the protocol is not loaded in
the kernel).
When I load 8021q module, these packets are forwarded to the module, but
they are discarded also as VLAN 0 is not configured.
I think this should not be the default behaviour, as VLAN 0 is not really
a VLAN, so it should be treated differently.
I could define the VLAN 0 (ip link add link eth0 name eth0.dot1p type vlan
id 0), but then I have a lot of issues with the ARP table entries, as to
ping the other box, outgoing traffic goes through eth0, but incoming arp
reply ends up in eth0.dot1p. In the end this means I can not communicate
with the box using 802.1p unless I use 802.1p tagging for all traffic in
the network (the linux box and all other), which is not a must of the spec.
I have developed a patch for vlan_dev.c which makes VLAN 0 to be just
reintroduced to netif_rx but with no VLAN tagging if VLAN 0 has not been
defined, so the default behaviour is to ignore the VLAN tagging and accept
the packet as if it was not tagged, and one can still define something
different for VLAN 0 if desired (so it is backwards compatible).
=======================================================================
*** linux-source-2.6.26/net/8021q/vlan_dev.c 2008-07-13
23:51:29.000000000 +0200
--- vlan_patch/net/8021q/vlan_dev.c 2010-06-13 20:24:46.000000000
+0200
*************** int vlan_skb_recv(struct sk_buff *skb, s
*** 151,156 ****
--- 151,157 ----
struct vlan_hdr *vhdr;
unsigned short vid;
struct net_device_stats *stats;
+ struct net_device *vlan_dev;
unsigned short vlan_TCI;
skb = skb_share_check(skb, GFP_ATOMIC);
*************** int vlan_skb_recv(struct sk_buff *skb, s
*** 165,176 ****
vid = (vlan_TCI & VLAN_VID_MASK);
rcu_read_lock();
! skb->dev = __find_vlan_dev(dev, vid);
! if (!skb->dev) {
pr_debug("%s: ERROR: No net_device for VID: %u on dev:
%s\n",
__func__, (unsigned int)vid, dev->name);
goto err_unlock;
}
skb->dev->last_rx = jiffies;
--- 166,191 ----
vid = (vlan_TCI & VLAN_VID_MASK);
rcu_read_lock();
! vlan_dev = __find_vlan_dev(dev, vid);
! if(vlan_dev) {
! skb->dev = vlan_dev;
! }
! else if(vid) {
pr_debug("%s: ERROR: No net_device for VID: %u on dev:
%s\n",
__func__, (unsigned int)vid, dev->name);
goto err_unlock;
}
+ else {
+ /* 2010-06-13: Pedro Garcia
+ The packet is VLAN tagged, but VID is 0 and the user
has
+ not defined anything for VLAN 0, so it is a 802.1p
packet.
+ We will just netif_rx it later to the original
interface,
+ but with the skb->proto set to the wrapped proto, so we
do
+ nothing here. */
+
+ pr_debug("%s: INFO: VLAN 0 used as default VLAN on dev:
%s\n",
+ __func__, dev->name);
+ }
skb->dev->last_rx = jiffies;
=======================================================================
I do not really have much experience in touching the kernel so maybe I
have done it totally wrong..., but there are no major changes applied, and
this way the 8021q module is more transparently similar to the expected
behaviour of 802.1p (VLAN 0 means no VLAN).
Regards,
Pedro
^ permalink raw reply
* Re: [REGRESSION]linux-2.6.35-rc3 in net/core/dev.c
From: Heinz Diehl @ 2010-06-13 15:28 UTC (permalink / raw)
To: linux-kernel; +Cc: netdev
In-Reply-To: <20100613165421.7e8dda79@holly>
On 13.06.2010, Jindrich Makovicka wrote:
> I can confirm this. Reverting of this patch fixes a regression with
> Privoxy running on localhost, where most of the connections
> (browser->proxy) stall and don't return anything.
This does also fix this bug:
https://bugzilla.kernel.org/show_bug.cgi?id=16188
^ permalink raw reply
* read(2) hangs waiting for data from a closed socket
From: Alex Riesen @ 2010-06-13 15:07 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: netdev
[-- Attachment #1: Type: text/plain, Size: 4806 bytes --]
Hi,
I noticed that conky (http://conky.sourceforge.net/) freezes while reading
from hddtemp socket (it's an IPv4 TCP socket, loopback).
I didn't notice when exactly this started happening (I started running
full desktop on 2.6.35 only since -rc3) and haven't bisected yet (I'll try,
time and our daughter permitting).
Little what I have (2.6.35 crashes on me yet):
- hddtemp has closed this socket already (lsof -p `pidof hddtemp`
shows only its listening socket, no established connections). I can even
kill hddtemp altogether, I does not matter for conky's read
- conky waits in read(2) with this trace:
conky S ffff880033550348 0 19324 1 0x00000001
ffff880074a85b08 0000000000000082 0000000000004000 ffff880074a85fd8
0000000000013640 ffff880074a85fd8 ffff880033550000 0000000000013640
0000000000013640 0000000000013640 0000000000013640 ffff880033550000
Call Trace:
[<ffffffff81465d81>] schedule_timeout+0x28/0x243
[<ffffffff81028a12>] ? scale_rt_power+0x23/0x69
[<ffffffff81034683>] ? load_balance+0x40a/0xf99
[<ffffffff814676cb>] ? _raw_spin_unlock_bh+0xf/0x11
[<ffffffff8136463e>] sk_wait_data+0x87/0xd1
[<ffffffff81050e32>] ? autoremove_wake_function+0x0/0x38
[<ffffffff813a793a>] tcp_recvmsg+0x431/0x88f
[<ffffffff813c2b0b>] inet_recvmsg+0x6b/0x80
[<ffffffff81360fe9>] sock_aio_read+0x118/0x12c
[<ffffffff810cc722>] do_sync_read+0xc7/0x10d
[<ffffffff8104930e>] ? ptrace_notify+0x95/0xb1
[<ffffffff81161aea>] ? security_file_permission+0x11/0x13
[<ffffffff810cd1a7>] vfs_read+0xbe/0x147
[<ffffffff810cd2f4>] sys_read+0x47/0x6f
[<ffffffff81002ba9>] tracesys+0xd9/0xde
(I have modified conky to use read, original code used recv,
doesn't matter in this case, though).
- It doesn't happen every time conky connects to hddtemp,
but surely happens if leave it running for five minutes. I could
reproduce the problem by running a simple program which
just connects to hddtemp, polls(2), reads and exits, in a tight
loop, so it is not something specific to conky. An while the conky's
code is not pretty it is certainly nothing unusual: basically
connect, select for incoming, blocking read if select returns
a ready socket, and close (see below).
- the system is a Dell M1330 laptop (Core 2 Duo, 64bit kernel
and userspace). Config attached.
The conky's code (conky_1.6.1-0ubuntu4):
char *get_hddtemp_info(char *dev, char *hostaddr, int port, char *unit)
{
int sockfd = 0;
struct hostent he, *he_res = 0;
int he_errno;
char hostbuff[2048];
struct sockaddr_in addr;
struct timeval tv;
fd_set rfds;
int len, i, devlen = strlen(dev);
char sep;
char *p, *out, *r = NULL;
if ((sockfd = socket(AF_INET, SOCK_STREAM, 0)) == -1) {
perror("socket");
return NULL;
}
do {
#ifdef HAVE_GETHOSTBYNAME_R
if (gethostbyname_r(hostaddr, &he, hostbuff, sizeof(hostbuff),
&he_res, &he_errno)) { // get the host info
ERR("hddtemp gethostbyname_r: %s", hstrerror(h_errno));
break;
}
#else /* HAVE_GETHOSTBYNAME_R */
he_res = gethostbyname(hostaddr);
if (!he_res) {
perror("gethostbyname");
break;
}
#endif /* HAVE_GETHOSTBYNAME_R */
addr.sin_family = AF_INET;
addr.sin_port = htons(port);
addr.sin_addr = *((struct in_addr *) he_res->h_addr);
memset(&(addr.sin_zero), 0, 8);
if (connect(sockfd, (struct sockaddr *) &addr,
sizeof(struct sockaddr)) == -1) {
perror("connect");
break;
}
FD_ZERO(&rfds);
FD_SET(sockfd, &rfds);
/* We're going to wait up to a quarter a second to see whether there's
* any data available. Polling with timeout set to 0 doesn't seem to work
* with hddtemp. */
tv.tv_sec = 0;
tv.tv_usec = 250000;
i = select(sockfd + 1, &rfds, NULL, NULL, &tv);
if (i == -1) {
if (errno == EINTR) { /* silently ignore interrupted system call */
break;
} else {
perror("select");
}
}
/* No data available */
if (i <= 0) {
break;
}
p = buf;
len = 0;
do {
i = read(sockfd, p, BUFLEN - (p - buf));
if (i < 0) {
perror("read");
break;
}
len += i;
p += i;
} while (i > 0 && p < buf + BUFLEN - 1);
if (len < 2) {
break;
}
buf[len] = 0;
/* The first character read is the separator. */
sep = buf[0];
p = buf + 1;
while (*p) {
if (!strncmp(p, dev, devlen)) {
p += devlen + 1;
p = strchr(p, sep);
if (!p) {
break;
}
p++;
out = p;
p = strchr(p, sep);
if (!p) {
break;
}
*p = '\0';
p++;
*unit = *p;
if (!strncmp(out, "NA", 2)) {
strncpy(buf, "N/A", BUFLEN);
r = buf;
} else {
r = out;
}
break;
} else {
for (i = 0; i < 5; i++) {
p = strchr(p, sep);
if (!p) {
break;
}
p++;
}
if (!p && i < 5) {
break;
}
}
}
} while (0);
close(sockfd);
return r;
}
[-- Attachment #2: 2.6.35-rc3.config --]
[-- Type: application/octet-stream, Size: 78001 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc3
# Sat Jun 12 10:34:43 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-t"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_X2APIC is not set
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=m
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
# CONFIG_ACPI_APEI_EINJ is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_RPS=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_L2CAP_EXT_FEATURES=y
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_TKIP_DEBUG is not set
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_MPL_DEBUG is not set
# CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG is not set
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
# CONFIG_MAC80211_DRIVER_API_TRACER is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=m
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_AR9170_USB=m
CONFIG_AR9170_LEDS=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=y
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=y
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI_PCI=y
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT30XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL12XX is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_WINBOND_CIR is not set
# CONFIG_INPUT_PCF8574 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_IR_CORE=y
CONFIG_VIDEO_IR=y
# CONFIG_RC_MAP is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_IMON is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_TLG2300 is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
CONFIG_USB_OV511=m
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_DIB0700 is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
CONFIG_DVB_USB_TTUSB2=m
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
# CONFIG_DVB_USB_DW2102 is not set
# CONFIG_DVB_USB_CINERGY_T2 is not set
# CONFIG_DVB_USB_ANYSEE is not set
# CONFIG_DVB_USB_DTV5100 is not set
# CONFIG_DVB_USB_AF9015 is not set
# CONFIG_DVB_USB_CE6230 is not set
# CONFIG_DVB_USB_FRIIO is not set
# CONFIG_DVB_USB_EC168 is not set
# CONFIG_DVB_USB_AZ6027 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set
#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set
#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_PLL=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=30
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=20
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_WLP=m
CONFIG_UWB_I1480U=m
CONFIG_UWB_I1480U_WLP=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_WMI=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_EEEPC_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_NILFS2_FS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTRS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FS_PRETTYDEBUG is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_FPU=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply
* Re: [REGRESSION]linux-2.6.35-rc3 in net/core/dev.c
From: Jindrich Makovicka @ 2010-06-13 14:54 UTC (permalink / raw)
To: linux-kernel; +Cc: netdev
In-Reply-To: <201006131625.55481.mitov@issp.bas.bg>
On Sun, 13 Jun 2010 16:25:54 +0300
Marin Mitov <mitov@issp.bas.bg> wrote:
> Hi all,
>
> I am using ssh with port redirection to log on host_at_work:
>
> ssh -L20110:mail:110 host_at_work
>
> With linux-2.6.35-rc3, when I telnet to localhost I get:
>
> telnet localhost 20110
> Trying 127.0.0.1...
> telnet: connect to address 127.0.0.1: Connection timed out
[...]
>
> I have seen the posting on LKML:
>
> http://lkml.org/lkml/2010/6/13/11
>
> and decided to revert the patch mentioned their (see bellow).
> The revert solves the problem for me.
I can confirm this. Reverting of this patch fixes a regression with
Privoxy running on localhost, where most of the connections
(browser->proxy) stall and don't return anything.
--
Jindrich Makovicka
^ permalink raw reply
* 2.6.35-rc3: Reported regressions 2.6.33 -> 2.6.34
From: Rafael J. Wysocki @ 2010-06-13 14:45 UTC (permalink / raw)
To: Linux Kernel Mailing List
Cc: Maciej Rutecki, Andrew Morton, Linus Torvalds,
Kernel Testers List, Network Development, Linux ACPI,
Linux PM List, Linux SCSI List, Linux Wireless List, DRI
[NOTES:
* This report has been delayed, because I had to go through all of the
entries and filter out the fixed ones, invalid ones etc. Of course, I might
have missed some, but hopefully not too many.
* E-mail reports from the last 7 days are not included.]
This message contains a list of some post-2.6.33 regressions introduced before
2.6.34, for which there are no fixes in the mainline known to the tracking team.
If any of them have been fixed already, please let us know.
If you know of any other unresolved post-2.6.33 regressions, please let us know
either and we'll add them to the list. Also, please let us know if any
of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.
Listed regressions statistics:
Date Total Pending Unresolved
----------------------------------------
2010-06-13 111 40 34
2010-05-09 80 27 24
2010-05-04 76 26 22
2010-04-20 64 35 34
2010-04-07 48 35 33
2010-03-21 15 13 10
Unresolved regressions
----------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16170
Subject : Leadtek Winfast DTV Dongle (STK7700P based) is not working in 2.6.34
Submitter : macjariel <macjariel@gmail.com>
Date : 2010-06-09 11:11 (5 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16162
Subject : SSD + sata_nv + btrfs oops
Submitter : Dave Airlie <airlied@gmail.com>
Date : 2010-06-01 3:04 (13 days old)
Message-ID : <AANLkTilqsIdlzZgUf7TMLHYKqHDZoVkcs42vcG8wXKEr@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127536149022333&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16158
Subject : winxp guest hangs after idle for ~30 minutes
Submitter : brimhall <brimhall@pobox.com>
Date : 2010-06-08 17:52 (6 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16139
Subject : wait_even_interruptible_timeout(), signal, spin_lock() = system hang
Submitter : Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Date : 2010-05-28 16:44 (17 days old)
Message-ID : <AANLkTiliRFydAhxH2-Dp1RKuz6sq7vgWIcMvLMi68ftg@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127506510328758&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16137
Subject : Ooops in BTRFS in 2.6.34 / x86_64 when mounting subvolume by name
Submitter : armin walland <a.walland@focusmr.com>
Date : 2010-05-27 12:27 (18 days old)
Message-ID : <201005271428.01239.a.walland@focusmr.com>
References : http://marc.info/?l=linux-kernel&m=127496434110736&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16136
Subject : Linux 2.6.34 causes system lockup on Compaq Presario 2200 Laptop
Submitter : Jeffrey Merkey <jeffmerkey@gmail.com>
Date : 2010-05-27 18:08 (18 days old)
Message-ID : <AANLkTil6GGSoc8TpzRacr1LZBZS3ee3H1ejYDSqfdul4@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127498375415689&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16135
Subject : [BUG] kacpi_notify goes into an infinite loop (luckly it calls cond_resched)
Submitter : Steven Rostedt <rostedt@goodmis.org>
Date : 2010-05-29 1:01 (16 days old)
First-Bad-Commit: http://git.kernel.org/linus/fa80945269f312bc609e8384302f58b03c916e12
Message-ID : <1275094882.22648.607.camel@gandalf.stny.rr.com>
References : http://marc.info/?l=linux-kernel&m=127509490405845&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16134
Subject : 2.6.34 hard lock ppp/do_tty_hangup, regression
Submitter : Richard Zidlicky <rz@linux-m68k.org>
Date : 2010-05-26 8:48 (19 days old)
Message-ID : <20100526084811.GA5890@linux-m68k.org>
References : http://marc.info/?l=linux-kernel&m=127486354023473&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16111
Subject : hostap_pci: infinite registered netdevice wifi0
Submitter : Petr Pisar <petr.pisar@atlas.cz>
Date : 2010-06-02 20:55 (12 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16097
Subject : 2.6.34 on Samsung P460: reset after "Waiting for /dev to be fully populated"
Submitter : Harald Dunkel <harald.dunkel@aixigo.de>
Date : 2010-05-25 9:12 (20 days old)
Message-ID : <4BFB947E.9080509@aixigo.de>
References : http://marc.info/?l=linux-kernel&m=127477877432254&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16084
Subject : iwl3945 bug in 2.6.34
Submitter : Satish Eerpini <eerpini@gmail.com>
Date : 2010-05-23 6:37 (22 days old)
Message-ID : <AANLkTik_7rxDBc0TKlAfoYyM5S6Cf_Hyxbr4W5ORnTsq@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127459596015626&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16082
Subject : host panic on kernel 2.6.34
Submitter : Hao, Xudong <xudong.hao@intel.com>
Date : 2010-05-24 8:23 (21 days old)
Message-ID : <BC00F5384FCFC9499AF06F92E8B78A9E04DCCCE242@shsmsx502.ccr.corp.intel.com>
References : http://marc.info/?l=linux-kernel&m=127468951208864&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16054
Subject : UML broken for CONFIG_SLAB
Submitter : Parag Warudkar <parag.lkml@gmail.com>
Date : 2010-05-23 21:40 (22 days old)
Message-ID : <alpine.DEB.2.00.1005231149100.605@parag-laptop>
References : http://marc.info/?l=linux-kernel&m=127465083806617&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16050
Subject : The ibmcam driver is not working
Submitter : Bill Davidsen <davidsen@tmr.com>
Date : 2010-05-25 23:02 (20 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16040
Subject : kacpid consumes ~40% of cpu all the time beginning with 2.6.34
Submitter : Mehmet Giritli <mehmet@giritli.eu>
Date : 2010-05-24 07:32 (21 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16035
Subject : Incorrect initial resolution of (external) vga monitor with KMS
Submitter : andreas.eckstein <andreas.eckstein@gmx.net>
Date : 2010-05-23 12:28 (22 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16034
Subject : 2.6.34: dlm: possible circular locking dependency detected
Submitter : CaT <cat@zip.com.au>
Date : 2010-05-21 6:59 (24 days old)
Message-ID : <20100521065933.GH2657@zip.com.au>
References : http://marc.info/?l=linux-kernel&m=127442519608471&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15977
Subject : WARNING: at lib/dma-debug.c:866 check_for_stack
Submitter : Zdenek Kabelac <zdenek.kabelac@gmail.com>
Date : 2010-05-14 8:56 (31 days old)
Message-ID : <AANLkTikyx2eaxaiUCFDSfpmn1UG0t2GOxArz6F4wp1LJ@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127382742729825&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15970
Subject : BUG: amd64-agp (2.6.34-rc7)
Submitter : Randy Dunlap <randy.dunlap@oracle.com>
Date : 2010-05-11 20:56 (34 days old)
Message-ID : <4BE9C469.2020901@oracle.com>
References : http://marc.info/?l=linux-kernel&m=127361149610881&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15951
Subject : commit 9630bdd9 changes behavior of the poweroff
Submitter : Michal Hocko <mhocko@suse.cz>
Date : 2010-04-01 13:39 (74 days old)
First-Bad-Commit: http://git.kernel.org/linus/9630bdd9b15d2f489c646d8bc04b60e53eb5ec78
Message-ID : <20100401133923.GA4104@tiehlicka.suse.cz>
References : http://marc.info/?l=linux-kernel&m=127012918316305&w=4
Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15936
Subject : Suspicious rcu_dereference_check() usage detected during 2.6.34-rc6 boot on PPC64/p5 processor
Submitter : Subrata Modak <subrata@linux.vnet.ibm.com>
Date : 2010-05-06 7:29 (39 days old)
Message-ID : <1273130279.4898.5.camel@subratamodak.linux.ibm.com>
References : http://marc.info/?l=linux-kernel&m=127313031922395&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15924
Subject : kacpid consumes ~100% CPU, system freezes randomly
Submitter : Jaroslav Kameník <jaroslav@kamenik.cz>
Date : 2010-05-06 21:12 (39 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15862
Subject : 2.6.34-rc4/5: iwlagn unusable until reload
Submitter : Nico Schottelius <nico-linux-20100427@schottelius.org>
Date : 2010-04-27 7:49 (48 days old)
Message-ID : <20100427074934.GB3261@ikn.schottelius.org>
References : http://marc.info/?l=linux-kernel&m=127235784004839&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15858
Subject : [2.6.34-rc5] bad page state copying to/from HFS+ filesystem...
Submitter : Daniel J Blueman <daniel.blueman@gmail.com>
Date : 2010-04-25 21:14 (50 days old)
Message-ID : <v2k6278d2221004251414kbbcc41baw78b86120d81dce7d@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127223008621881&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15805
Subject : reiserfs locking
Submitter : Alexander Beregalov <a.beregalov@gmail.com>
Date : 2010-04-15 21:02 (60 days old)
Message-ID : <t2ka4423d671004151402n7b2dc425mdc9c6bb9640d63fb@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127136535323933&w=2
Handled-By : Frederic Weisbecker <fweisbec@gmail.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15717
Subject : bluetooth oops
Submitter : Pavel Machek <pavel@ucw.cz>
Date : 2010-03-14 20:14 (92 days old)
Message-ID : <20100314201434.GE22059@elf.ucw.cz>
References : http://marc.info/?l=linux-kernel&m=126859771528426&w=4
Handled-By : Marcel Holtmann <marcel@holtmann.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15713
Subject : hackbench regression due to commit 9dfc6e68bfe6e
Submitter : Alex Shi <alex.shi@intel.com>
Date : 2010-03-25 8:40 (81 days old)
First-Bad-Commit: http://git.kernel.org/linus/9dfc6e68bfe6ee452efb1a4e9ca26a9007f2b864
Message-ID : <1269506457.4513.141.camel@alexs-hp.sh.intel.com>
References : http://marc.info/?l=linux-kernel&m=126950632920682&w=4
Handled-By : Christoph Lameter <cl@linux-foundation.org>
Pekka Enberg <penberg@cs.helsinki.fi>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15712
Subject : [regression] 2.6.34-rc1 to -rc3 on zaurus: no longer boots
Submitter : Pavel Machek <pavel@ucw.cz>
Date : 2010-04-01 6:06 (74 days old)
Message-ID : <20100401060624.GA1329@ucw.cz>
References : http://marc.info/?l=linux-kernel&m=127010200817402&w=2
Handled-By : Eric Miao <eric.y.miao@gmail.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15704
Subject : [r8169] WARNING: at net/sched/sch_generic.c
Submitter : Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date : 2010-03-31 10:21 (75 days old)
Message-ID : <20100331102142.GA3294@swordfish.minsk.epam.com>
References : http://marc.info/?l=linux-kernel&m=127003090406108&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15673
Subject : 2.6.34-rc2: "ima_dec_counts: open/free imbalance"?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Date : 2010-03-28 11:31 (78 days old)
Message-ID : <1269775909.5301.4.camel@localhost.localdomain>
References : http://marc.info/?l=linux-kernel&m=126977593326800&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15671
Subject : intel graphic card hanging (Hangcheck timer elapsed... GPU hung)
Submitter : Norbert Preining <preining@logic.at>
Date : 2010-03-27 16:11 (79 days old)
Message-ID : <20100327161104.GA12043@gamma.logic.tuwien.ac.at>
References : http://marc.info/?l=linux-kernel&m=126970883105262&w=2
Handled-By : Jesse Barnes <jbarnes@virtuousgeek.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15669
Subject : INFO: suspicious rcu_dereference_check()
Submitter : Zdenek Kabelac <zdenek.kabelac@gmail.com>
Date : 2010-03-08 1:26 (98 days old)
Message-ID : <c4e36d111003250348q678eb2e6w4f3e8133e7fd6e58@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=126801163107713&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15664
Subject : Graphics hang and kernel backtrace when starting Azureus with Compiz enabled
Submitter : Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Date : 2010-04-01 01:09 (74 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15659
Subject : [Regresion] [2.6.34-rc1] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
Submitter : Maciej Rutecki <maciej.rutecki@gmail.com>
Date : 2010-03-25 20:04 (81 days old)
Message-ID : <201003252104.24965.maciej.rutecki@gmail.com>
References : http://marc.info/?l=linux-kernel&m=126954749618319&w=2
Handled-By : Chris Wilson <chris@chris-wilson.co.uk>
Regressions with patches
------------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16147
Subject : ksoftirq hogs the CPU
Submitter : Thomas Jarosch <thomas.jarosch@intra2net.com>
Date : 2010-06-07 15:17 (7 days old)
First-Bad-Commit: http://git.kernel.org/linus/ae74e823cb7d4cd476f623fce9a38f625f6c09a8
Handled-By : Martin Wilck <martin.wilck@ts.fujitsu.com>
Patch : https://bugzilla.kernel.org/attachment.cgi?id=26732
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16138
Subject : PCMCIA regression
Submitter : Mikulas Patocka <mpatocka@redhat.com>
Date : 2010-05-25 20:25 (20 days old)
Message-ID : <Pine.LNX.4.64.1005251619020.12278@hs20-bc2-1.build.redhat.com>
References : http://marc.info/?l=linux-kernel&m=127481913909672&w=2
Handled-By : Dominik Brodowski <linux@brodo.de>
Patch : https://bugzilla.kernel.org/attachment.cgi?id=26685
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16007
Subject : x86/pci Oops with CONFIG_SND_HDA_INTEL
Submitter : Graham Ramsey <ramsey.graham@ntlworld.com>
Date : 2010-05-19 17:09 (26 days old)
Handled-By : Yinghai Lu <yinghai@kernel.org>
Patch : https://patchwork.kernel.org/patch/105662/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15909
Subject : open("a/",O_NOFOLLOW) fails with ELOOP if "a" is a symbolic link to a directory.
Submitter : Marius Tolzmann <tolzmann@molgen.mpg.de>
Date : 2010-05-05 13:01 (40 days old)
Handled-By : OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Jan Kara <jack@suse.cz>
Patch : https://patchwork.kernel.org/patch/99291/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15863
Subject : 2.6.34-rc5-git7 (plus all patches) -- another suspicious rcu_dereference_check() usage.
Submitter : Miles Lane <miles.lane@gmail.com>
Date : 2010-04-27 0:51 (48 days old)
Message-ID : <h2ya44ae5cd1004261751waa5cb65ei3d139cbcfa2cc5cf@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127232949104878&w=2
Handled-By : Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Patch : https://patchwork.kernel.org/patch/96096/
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15589
Subject : 2.6.34-rc1: Badness at fs/proc/generic.c:316
Submitter : Christian Kujau <lists@nerdbynature.de>
Date : 2010-03-13 23:53 (93 days old)
Message-ID : <<alpine.DEB.2.01.1003131544340.5493@bogon.housecafe.de>>
References : http://marc.info/?l=linux-kernel&m=126852442903680&w=2
Handled-By : Michael Ellerman <michael@ellerman.id.au>
Patch : http://patchwork.ozlabs.org/patch/52978/
For details, please visit the bug entries and follow the links given in
references.
As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.33 and 2.6.34, unresolved as well as resolved, at:
http://bugzilla.kernel.org/show_bug.cgi?id=15310
Please let the tracking teak know if there are any Bugzilla entries that
should be added to the list in there.
Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH 8/8] af_unix: Allow connecting to sockets in other network namespaces.
From: Eric W. Biederman @ 2010-06-13 13:35 UTC (permalink / raw)
To: David Miller
Cc: Serge Hallyn, Linux Containers, Daniel Lezcano, netdev,
Pavel Emelyanov
In-Reply-To: <m1hbl7hxo3.fsf@fess.ebiederm.org>
Remove the restriction that only allows connecting to a unix domain
socket identified by unix path that is in the same network namespace.
Crossing network namespaces is always tricky and we did not support
this at first, because of a strict policy of don't mix the namespaces.
Later after Pavel proposed this we did not support this because no one
had performed the audit to make certain using unix domain sockets
across namespaces is safe.
What fundamentally makes connecting to af_unix sockets in other
namespaces is safe is that you have to have the proper permissions on
the unix domain socket inode that lives in the filesystem. If you
want strict isolation you just don't create inodes where unfriendlys
can get at them, or with permissions that allow unfriendlys to open
them. All nicely handled for us by the mount namespace and other
standard file system facilities.
I looked through unix domain sockets and they are a very controlled
environment so none of the work that goes on in dev_forward_skb to
make crossing namespaces safe appears needed, we are not loosing
controll of the skb and so do not need to set up the skb to look like
it is comming in fresh from the outside world. Further the fields in
struct unix_skb_parms should not have any problems crossing network
namespaces.
Now that we handle SCM_CREDENTIALS in a way that gives useable values
across namespaces. There does not appear to be any operational
problems with encouraging the use of unix domain sockets across
containers either.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
net/unix/af_unix.c | 7 ++-----
1 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 78d412a..4aaff40 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -282,7 +282,7 @@ static inline struct sock *unix_find_socket_byname(struct net *net,
return s;
}
-static struct sock *unix_find_socket_byinode(struct net *net, struct inode *i)
+static struct sock *unix_find_socket_byinode(struct inode *i)
{
struct sock *s;
struct hlist_node *node;
@@ -292,9 +292,6 @@ static struct sock *unix_find_socket_byinode(struct net *net, struct inode *i)
&unix_socket_table[i->i_ino & (UNIX_HASH_SIZE - 1)]) {
struct dentry *dentry = unix_sk(s)->dentry;
- if (!net_eq(sock_net(s), net))
- continue;
-
if (dentry && dentry->d_inode == i) {
sock_hold(s);
goto found;
@@ -757,7 +754,7 @@ static struct sock *unix_find_other(struct net *net,
err = -ECONNREFUSED;
if (!S_ISSOCK(inode->i_mode))
goto put_fail;
- u = unix_find_socket_byinode(net, inode);
+ u = unix_find_socket_byinode(inode);
if (!u)
goto put_fail;
--
1.6.5.2.143.g8cc62
^ permalink raw reply related
* [PATCH 7/8] af_unix: Allow credentials to work across user and pid namespaces.
From: Eric W. Biederman @ 2010-06-13 13:34 UTC (permalink / raw)
To: David Miller
Cc: Serge Hallyn, Linux Containers, Daniel Lezcano, netdev,
Pavel Emelyanov
In-Reply-To: <m1hbl7hxo3.fsf@fess.ebiederm.org>
In unix_skb_parms store pointers to struct pid and struct cred instead
of raw uid, gid, and pid values, then translate the credentials on
reception into values that are meaningful in the receiving processes
namespaces.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
include/net/af_unix.h | 4 +-
net/unix/af_unix.c | 53 ++++++++++++++++++++++++++++--------------------
2 files changed, 33 insertions(+), 24 deletions(-)
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 1614d78..59d636c 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -23,7 +23,8 @@ struct unix_address {
};
struct unix_skb_parms {
- struct ucred creds; /* Skb credentials */
+ struct pid *pid; /* Skb credentials */
+ const struct cred *cred;
struct scm_fp_list *fp; /* Passed files */
#ifdef CONFIG_SECURITY_NETWORK
u32 secid; /* Security ID */
@@ -31,7 +32,6 @@ struct unix_skb_parms {
};
#define UNIXCB(skb) (*(struct unix_skb_parms*)&((skb)->cb))
-#define UNIXCREDS(skb) (&UNIXCB((skb)).creds)
#define UNIXSID(skb) (&UNIXCB((skb)).secid)
#define unix_state_lock(s) spin_lock(&unix_sk(s)->lock)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 028fa25..78d412a 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1315,18 +1315,20 @@ static void unix_detach_fds(struct scm_cookie *scm, struct sk_buff *skb)
int i;
scm->fp = UNIXCB(skb).fp;
- skb->destructor = sock_wfree;
UNIXCB(skb).fp = NULL;
for (i = scm->fp->count-1; i >= 0; i--)
unix_notinflight(scm->fp->fp[i]);
}
-static void unix_destruct_fds(struct sk_buff *skb)
+static void unix_destruct_scm(struct sk_buff *skb)
{
struct scm_cookie scm;
memset(&scm, 0, sizeof(scm));
- unix_detach_fds(&scm, skb);
+ scm.pid = UNIXCB(skb).pid;
+ scm.cred = UNIXCB(skb).cred;
+ if (UNIXCB(skb).fp)
+ unix_detach_fds(&scm, skb);
/* Alas, it calls VFS */
/* So fscking what? fput() had been SMP-safe since the last Summer */
@@ -1349,10 +1351,22 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
for (i = scm->fp->count-1; i >= 0; i--)
unix_inflight(scm->fp->fp[i]);
- skb->destructor = unix_destruct_fds;
return 0;
}
+static int unix_scm_to_skb(struct scm_cookie *scm, struct sk_buff *skb, bool send_fds)
+{
+ int err = 0;
+ UNIXCB(skb).pid = get_pid(scm->pid);
+ UNIXCB(skb).cred = get_cred(scm->cred);
+ UNIXCB(skb).fp = NULL;
+ if (scm->fp && send_fds)
+ err = unix_attach_fds(scm, skb);
+
+ skb->destructor = unix_destruct_scm;
+ return err;
+}
+
/*
* Send AF_UNIX data.
*/
@@ -1409,12 +1423,9 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
if (skb == NULL)
goto out;
- memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred));
- if (siocb->scm->fp) {
- err = unix_attach_fds(siocb->scm, skb);
- if (err)
- goto out_free;
- }
+ err = unix_scm_to_skb(siocb->scm, skb, true);
+ if (err)
+ goto out_free;
unix_get_secdata(siocb->scm, skb);
skb_reset_transport_header(skb);
@@ -1584,16 +1595,14 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
*/
size = min_t(int, size, skb_tailroom(skb));
- memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred));
+
/* Only send the fds in the first buffer */
- if (siocb->scm->fp && !fds_sent) {
- err = unix_attach_fds(siocb->scm, skb);
- if (err) {
- kfree_skb(skb);
- goto out_err;
- }
- fds_sent = true;
+ err = unix_scm_to_skb(siocb->scm, skb, !fds_sent);
+ if (err) {
+ kfree_skb(skb);
+ goto out_err;
}
+ fds_sent = true;
err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
if (err) {
@@ -1710,7 +1719,7 @@ static int unix_dgram_recvmsg(struct kiocb *iocb, struct socket *sock,
siocb->scm = &tmp_scm;
memset(&tmp_scm, 0, sizeof(tmp_scm));
}
- siocb->scm->creds = *UNIXCREDS(skb);
+ scm_set_cred(siocb->scm, UNIXCB(skb).pid, UNIXCB(skb).cred);
unix_set_secdata(siocb->scm, skb);
if (!(flags & MSG_PEEK)) {
@@ -1859,14 +1868,14 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
if (check_creds) {
/* Never glue messages from different writers */
- if (memcmp(UNIXCREDS(skb), &siocb->scm->creds,
- sizeof(siocb->scm->creds)) != 0) {
+ if ((UNIXCB(skb).pid != siocb->scm->pid) ||
+ (UNIXCB(skb).cred != siocb->scm->cred)) {
skb_queue_head(&sk->sk_receive_queue, skb);
break;
}
} else {
/* Copy credentials */
- siocb->scm->creds = *UNIXCREDS(skb);
+ scm_set_cred(siocb->scm, UNIXCB(skb).pid, UNIXCB(skb).cred);
check_creds = 1;
}
--
1.6.5.2.143.g8cc62
^ permalink raw reply related
* [PATCH 6/8] scm: Capture the full credentials of the scm sender.
From: Eric W. Biederman @ 2010-06-13 13:32 UTC (permalink / raw)
To: David Miller
Cc: Serge Hallyn, Linux Containers, Daniel Lezcano, netdev,
Pavel Emelyanov
In-Reply-To: <m1hbl7hxo3.fsf@fess.ebiederm.org>
Start capturing not only the userspace pid, uid and gid values of the
sending process but also the struct pid and struct cred of the sending
process as well.
This is in preparation for properly supporting SCM_CREDENTIALS for
sockets that have different uid and/or pid namespaces at the different
ends.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
include/net/scm.h | 28 ++++++++++++++++++++++++----
net/core/scm.c | 24 ++++++++++++++++++++++++
2 files changed, 48 insertions(+), 4 deletions(-)
diff --git a/include/net/scm.h b/include/net/scm.h
index 17d9d2e..3165650 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -19,6 +19,8 @@ struct scm_fp_list {
};
struct scm_cookie {
+ struct pid *pid; /* Skb credentials */
+ const struct cred *cred;
struct scm_fp_list *fp; /* Passed files */
struct ucred creds; /* Skb credentials */
#ifdef CONFIG_SECURITY_NETWORK
@@ -42,8 +44,27 @@ static __inline__ void unix_get_peersec_dgram(struct socket *sock, struct scm_co
{ }
#endif /* CONFIG_SECURITY_NETWORK */
+static __inline__ void scm_set_cred(struct scm_cookie *scm,
+ struct pid *pid, const struct cred *cred)
+{
+ scm->pid = get_pid(pid);
+ scm->cred = get_cred(cred);
+ cred_to_ucred(pid, cred, &scm->creds);
+}
+
+static __inline__ void scm_destroy_cred(struct scm_cookie *scm)
+{
+ put_pid(scm->pid);
+ scm->pid = NULL;
+
+ if (scm->cred)
+ put_cred(scm->cred);
+ scm->cred = NULL;
+}
+
static __inline__ void scm_destroy(struct scm_cookie *scm)
{
+ scm_destroy_cred(scm);
if (scm && scm->fp)
__scm_destroy(scm);
}
@@ -51,10 +72,7 @@ static __inline__ void scm_destroy(struct scm_cookie *scm)
static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
struct scm_cookie *scm)
{
- struct task_struct *p = current;
- scm->creds.uid = current_uid();
- scm->creds.gid = current_gid();
- scm->creds.pid = task_tgid_vnr(p);
+ scm_set_cred(scm, task_tgid(current), current_cred());
scm->fp = NULL;
unix_get_peersec_dgram(sock, scm);
if (msg->msg_controllen <= 0)
@@ -96,6 +114,8 @@ static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg,
if (test_bit(SOCK_PASSCRED, &sock->flags))
put_cmsg(msg, SOL_SOCKET, SCM_CREDENTIALS, sizeof(scm->creds), &scm->creds);
+ scm_destroy_cred(scm);
+
scm_passec(sock, msg, scm);
if (!scm->fp)
diff --git a/net/core/scm.c b/net/core/scm.c
index b88f6f9..681c976 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -170,6 +170,30 @@ int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *p)
err = scm_check_creds(&p->creds);
if (err)
goto error;
+
+ if (pid_vnr(p->pid) != p->creds.pid) {
+ struct pid *pid;
+ err = -ESRCH;
+ pid = find_get_pid(p->creds.pid);
+ if (!pid)
+ goto error;
+ put_pid(p->pid);
+ p->pid = pid;
+ }
+
+ if ((p->cred->euid != p->creds.uid) ||
+ (p->cred->egid != p->creds.gid)) {
+ struct cred *cred;
+ err = -ENOMEM;
+ cred = prepare_creds();
+ if (!cred)
+ goto error;
+
+ cred->uid = cred->euid = p->creds.uid;
+ cred->gid = cred->egid = p->creds.uid;
+ put_cred(p->cred);
+ p->cred = cred;
+ }
break;
default:
goto error;
--
1.6.5.2.143.g8cc62
^ permalink raw reply related
* [PATCH 5/8] af_netlink: Add needed scm_destroy after scm_send.
From: Eric W. Biederman @ 2010-06-13 13:31 UTC (permalink / raw)
To: David Miller
Cc: Serge Hallyn, Linux Containers, Daniel Lezcano, netdev,
Pavel Emelyanov
In-Reply-To: <m1hbl7hxo3.fsf@fess.ebiederm.org>
scm_send occasionally allocates state in the scm_cookie, so I have
modified netlink_sendmsg to guarantee that when scm_send succeeds
scm_destory will be called to free that state.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
net/netlink/af_netlink.c | 11 ++++++++---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 6464a19..35654e7 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1306,19 +1306,23 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
if (msg->msg_flags&MSG_OOB)
return -EOPNOTSUPP;
- if (NULL == siocb->scm)
+ if (NULL == siocb->scm) {
siocb->scm = &scm;
+ memset(&scm, 0, sizeof(scm));
+ }
err = scm_send(sock, msg, siocb->scm);
if (err < 0)
return err;
if (msg->msg_namelen) {
+ err = -EINVAL;
if (addr->nl_family != AF_NETLINK)
- return -EINVAL;
+ goto out;
dst_pid = addr->nl_pid;
dst_group = ffs(addr->nl_groups);
+ err = -EPERM;
if (dst_group && !netlink_capable(sock, NL_NONROOT_SEND))
- return -EPERM;
+ goto out;
} else {
dst_pid = nlk->dst_pid;
dst_group = nlk->dst_group;
@@ -1370,6 +1374,7 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
err = netlink_unicast(sk, skb, dst_pid, msg->msg_flags&MSG_DONTWAIT);
out:
+ scm_destroy(siocb->scm);
return err;
}
--
1.6.5.2.143.g8cc62
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox