* Re: [PATCHv3] Add missing memory barriers to clean_rx_irq functions in Intel Drivers
From: Jeff Kirsher @ 2010-07-27 23:08 UTC (permalink / raw)
To: Sonny Rao; +Cc: netdev, e1000-devel
In-Reply-To: <20100727230540.GQ17248@us.ibm.com>
On Tue, Jul 27, 2010 at 16:05, Sonny Rao <sonnyrao@us.ibm.com> wrote:
> On Tue, Jul 27, 2010 at 03:45:42PM -0700, Jeff Kirsher wrote:
>>
>> You also seem to be missing igb.
>
> This patch is similar to what was fixed in ixgbe in this patch:
>
> http://marc.info/?l=e1000-devel&m=126593062701537&w=3
>
> We should add read memory barriers to all the similar cases across the
> Intel ethernet driver family. In the case of ixgbevf, igb, and igbvf
> I've also added a missing barrier to the clean_tx_irq path because I
> missed it in my last patch.
>
> Without the barrier a processor can speculate a load ahead of the load
> which looks at the status bit and get stale information causing a
> number of different issues including invalid packet length, NULL
> pointers, or bad data since checksumming was assumed to be done
> in hardware.
>
> v2: I missed the e100 the first time
> v3: I missed igb and igbvf, third time's the charm?
>
> Signed-off-by: Milton Miller <miltonm@bga.com>
> Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com>
> cc: stable <stable@kernel.org>
>
Thanks, I have added the patch to my queue.
--
Cheers,
Jeff
^ permalink raw reply
* Re: RX/close vcc race with solos/atmtcp/usbatm/he
From: Nathan Williams @ 2010-07-27 23:12 UTC (permalink / raw)
To: David Woodhouse; +Cc: linux-atm-general, netdev
In-Reply-To: <1275904970.17903.4658.camel@macbook.infradead.org>
On 7/06/2010 8:02 PM, David Woodhouse wrote:
> On Wed, 2010-05-26 at 12:16 +0100, David Woodhouse wrote:
>> I've had this crash reported to me...
>>
>> [18842.727906] EIP: [<e082f490>] br2684_push+0x19/0x234 [br2684]
>> SS:ESP 0068:dfb89d14
>
> Nathan, did you manage to get your customer to confirm that this fixes
> the problem? It'd be useful to get this into 2.6.35 and -stable.
>
I've had confirmation from the customer. The patch fixed his problem.
^ permalink raw reply
* [PATCH] tun: keep link (carrier) state up to date
From: Nolan Leake @ 2010-07-27 23:53 UTC (permalink / raw)
To: netdev
Currently, only ethtool can get accurate link state of a tap device.
With this patch, IFF_RUNNING and IF_OPER_UP/DOWN are kept up to date as
well.
Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com>
---
drivers/net/tun.c | 10 +++-------
1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 4fdfa2a..393273c 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -144,6 +144,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file)
err = 0;
tfile->tun = tun;
tun->tfile = tfile;
+ netif_carrier_on(tun->dev);
dev_hold(tun->dev);
sock_hold(tun->socket.sk);
atomic_inc(&tfile->count);
@@ -157,6 +158,7 @@ static void __tun_detach(struct tun_struct *tun)
{
/* Detach from net device */
netif_tx_lock_bh(tun->dev);
+ netif_carrier_off(tun->dev);
tun->tfile = NULL;
netif_tx_unlock_bh(tun->dev);
@@ -1425,12 +1427,6 @@ static void tun_set_msglevel(struct net_device *dev, u32 value)
#endif
}
-static u32 tun_get_link(struct net_device *dev)
-{
- struct tun_struct *tun = netdev_priv(dev);
- return !!tun->tfile;
-}
-
static u32 tun_get_rx_csum(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
@@ -1452,7 +1448,7 @@ static const struct ethtool_ops tun_ethtool_ops = {
.get_drvinfo = tun_get_drvinfo,
.get_msglevel = tun_get_msglevel,
.set_msglevel = tun_set_msglevel,
- .get_link = tun_get_link,
+ .get_link = ethtool_op_get_link,
.get_rx_csum = tun_get_rx_csum,
.set_rx_csum = tun_set_rx_csum
};
^ permalink raw reply related
* Re: [patch -next] ixgbe: potential null dereference
From: Jeff Kirsher @ 2010-07-28 0:10 UTC (permalink / raw)
To: Dan Carpenter
Cc: kernel-janitors, Mallikarjuna R Chilakala, e1000-devel,
Bruce Allan, Jesse Brandeburg, John Ronciak, netdev,
David S. Miller
In-Reply-To: <20100727100556.GM26313@bicker>
On Tue, Jul 27, 2010 at 03:05, Dan Carpenter <error27@gmail.com> wrote:
> The e_dev_err() macro dereferences "adapter" which is NULL here.
>
> Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++ apps to Palm for a share
of $1 Million in cash or HP Products. Visit us here for more details:
http://ad.doubleclick.net/clk;226879339;13503038;l?
http://clk.atdmt.com/CRS/go/247765532/direct/01/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply
* Re: [PATCH v2] macvlan: Fix rx counters update in macvlan_handle_frame()
From: Herbert Xu @ 2010-07-28 0:14 UTC (permalink / raw)
To: Sridhar Samudrala; +Cc: David Miller, netdev
In-Reply-To: <1280257807.27059.4.camel@w-sridhar.beaverton.ibm.com>
On Tue, Jul 27, 2010 at 12:10:07PM -0700, Sridhar Samudrala wrote:
> Fix macvlan_handle_frame() to update the rx counters based
> on the return value of the vlan->receive call.
>
> Updated the patch to not do any packet count drops when the interface
> is down based on Herber'ts comments.
>
> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Patch "IPv6: keep route for tentative address" has been added to the 2.6.34-stable tree
From: gregkh @ 2010-07-28 0:24 UTC (permalink / raw)
To: shemminger, davem, emils.tantilov, emil.s.tantilov, gregkh, greg,
netdev
Cc: stable, stable-commits
In-Reply-To: <20100524113118.47cc9852@nehalam>
This is a note to let you know that I've just added the patch titled
IPv6: keep route for tentative address
to the 2.6.34-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ipv6-keep-route-for-tentative-address.patch
and it can be found in the queue-2.6.34 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@kernel.org> know about it.
>From shemminger@vyatta.com Tue Jul 27 16:56:59 2010
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 24 May 2010 11:31:18 -0700
Subject: IPv6: keep route for tentative address
To: Emil S Tantilov <emils.tantilov@gmail.com>
Cc: NetDev <netdev@vger.kernel.org>, stable@kernel.org, Greg KH <greg@kroah.com>, "David S. Miller" <davem@davemloft.net>, "Tantilov, Emil S" <emil.s.tantilov@intel.com>
Message-ID: <20100524113118.47cc9852@nehalam>
From: Stephen Hemminger <shemminger@vyatta.com>
(cherry picked from commit 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b)
Recent changes preserve IPv6 address when link goes down (good).
But would cause address to point to dead dst entry (bad).
The simplest fix is to just not delete route if address is
being held for later use.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
net/ipv6/addrconf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4047,7 +4047,8 @@ static void __ipv6_ifa_notify(int event,
addrconf_leave_anycast(ifp);
addrconf_leave_solict(ifp->idev, &ifp->addr);
dst_hold(&ifp->rt->u.dst);
- if (ip6_del_rt(ifp->rt))
+
+ if (ifp->dead && ip6_del_rt(ifp->rt))
dst_free(&ifp->rt->u.dst);
break;
}
Patches currently in stable-queue which might be from shemminger@vyatta.com are
queue-2.6.34/sky2-restore-multicast-after-restart.patch
queue-2.6.34/ipv6-keep-route-for-tentative-address.patch
queue-2.6.34/ipv6-only-notify-protocols-if-address-is-completely-gone.patch
queue-2.6.34/ipv6-fix-null-reference-in-proxy-neighbor-discovery.patch
queue-2.6.34/bridge-fdb-cleanup-runs-too-often.patch
^ permalink raw reply
* RE: e1000e crashes with 2.6.34.x and ThinkPad T60
From: Tantilov, Emil S @ 2010-07-28 0:33 UTC (permalink / raw)
To: Marc Haber, Linux Kernel Developers,
Linux Kernel Network Developers
In-Reply-To: <20100724092644.GA13353@torres.zugschlus.de>
Marc Haber wrote:
> Hi,
>
> I have a new notebook, a Thinkpad T60, which is freezing in random
> intervals (like 30 minutes to two days) as long as I am using the
> on-board wired ethernet interface, which is an e1000e, [8086:109a]. As
> long as I keep using the WLAN, the system runs for weeks despite
> frequent suspend/resume cycles etc. The crashes seem really to be tied
> to using the wired ethernet. This is a hard freeze, with nothing
> happening on the system, only a long push on the power button helps.
When the crashes occur - is there a trace on the screen?
Do you know of a way to reproduce the issue? For example were
you downloading files, browsing internet, or using the ethernet device
in any way when the system crashed?
> Additionally, sometimes, probably after suspend/resume, the wired
> ethernet does not come up properly again, ip addr claims "NO CARRIER"
> even if the LEDs on the interface and on the switch claim that there
> was a link. No packets are received by the interface when it's at this
> stage.
>
> Both issues appear with 2.6.34 and 2.6.34.1. I didn't try any of these
> issues with an older kernel, 2.6.34 was already out when I started
> using the T60.
I got a T60 notebook running on 2.6.34.1 and will try to reproduce in house.
>
> To rule out defective hardware, I have tried with a second T60, with
> the same results.
>
> Full dmesg and lspci-nn attached, please say if you need more.
Doesn't seem that there were any attachments to this email.
Could you also provide the kernel config?
> Greetings
> Marc
Thanks,
Emil
^ permalink raw reply
* Patch "IPv6: only notify protocols if address is completely gone" has been added to the 2.6.34-stable tree
From: gregkh @ 2010-07-28 0:25 UTC (permalink / raw)
To: shemminger, davem, emils.tantilov, emil.s.tantilov, gregkh, greg,
netdev
Cc: stable, stable-commits
In-Reply-To: <20100524113300.2ef38e12@nehalam>
This is a note to let you know that I've just added the patch titled
IPv6: only notify protocols if address is completely gone
to the 2.6.34-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ipv6-only-notify-protocols-if-address-is-completely-gone.patch
and it can be found in the queue-2.6.34 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@kernel.org> know about it.
>From shemminger@vyatta.com Tue Jul 27 16:57:29 2010
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 24 May 2010 11:33:00 -0700
Subject: IPv6: only notify protocols if address is completely gone
To: Emil S Tantilov <emils.tantilov@gmail.com>, "David S. Miller" <davem@davemloft.net>, Greg KH <greg@kroah.com>
Cc: NetDev <netdev@vger.kernel.org>, "Tantilov, Emil S" <emil.s.tantilov@intel.com>, stable@kernel.org
Message-ID: <20100524113300.2ef38e12@nehalam>
From: Stephen Hemminger <shemminger@vyatta.com>
(cherry picked from commit 8595805aafc8b077e01804c9a3668e9aa3510e89)
The notifier for address down should only be called if address is completely
gone, not just being marked as tentative on link transition. The code
in net-next would case bonding/sctp/s390 to see address disappear on link
down, but they would never see it reappear on link up.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
net/ipv6/addrconf.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2729,7 +2729,9 @@ static int addrconf_ifdown(struct net_de
write_unlock_bh(&idev->lock);
__ipv6_ifa_notify(RTM_DELADDR, ifa);
- atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa);
+ if (ifa->dead)
+ atomic_notifier_call_chain(&inet6addr_chain,
+ NETDEV_DOWN, ifa);
in6_ifa_put(ifa);
write_lock_bh(&idev->lock);
Patches currently in stable-queue which might be from shemminger@vyatta.com are
queue-2.6.34/sky2-restore-multicast-after-restart.patch
queue-2.6.34/ipv6-keep-route-for-tentative-address.patch
queue-2.6.34/ipv6-only-notify-protocols-if-address-is-completely-gone.patch
queue-2.6.34/ipv6-fix-null-reference-in-proxy-neighbor-discovery.patch
queue-2.6.34/bridge-fdb-cleanup-runs-too-often.patch
^ permalink raw reply
* Re: Make vhost multi-threaded and associate each thread to its guest's cgroup
From: Sridhar Samudrala @ 2010-07-28 0:41 UTC (permalink / raw)
To: Michael S. Tsirkin; +Cc: netdev, lkml, kvm@vger.kernel.org, Tejun Heo, Li Zefan
In-Reply-To: <20100727204254.GA17947@redhat.com>
On Tue, 2010-07-27 at 23:42 +0300, Michael S. Tsirkin wrote:
> Sridhar,
> I pushed a patchset with all known issues fixed,
> on my vhost-net-next branch.
>
> For now this ignores the cpu mask issue, addressing
> only the cgroups issue.
>
> Would appreciate testing and reports.
I had to apply the following patch to get it build.
With this patch, i am seeing similar results as i saw earlier.
Thanks
Sridhar
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 996e751..8543898 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -23,6 +23,7 @@
#include <linux/highmem.h>
#include <linux/slab.h>
#include <linux/kthread.h>
+#include <linux/cgroup.h>
#include <linux/net.h>
#include <linux/if_packet.h>
@@ -252,7 +253,7 @@ static long vhost_dev_set_owner(struct vhost_dev *dev)
}
dev->worker = worker;
- err = cgroup_attach_task_current_cg(poller);
+ err = cgroup_attach_task_current_cg(worker);
if (err)
goto err_cgroup;
wake_up_process(worker); /* avoid contributing to loadavg */
^ permalink raw reply related
* Re: Make vhost multi-threaded and associate each thread to its guest's cgroup
From: Michael S. Tsirkin @ 2010-07-28 1:12 UTC (permalink / raw)
To: Sridhar Samudrala; +Cc: netdev, lkml, kvm@vger.kernel.org, Tejun Heo, Li Zefan
In-Reply-To: <1280277701.27059.11.camel@w-sridhar.beaverton.ibm.com>
On Tue, Jul 27, 2010 at 05:41:41PM -0700, Sridhar Samudrala wrote:
> On Tue, 2010-07-27 at 23:42 +0300, Michael S. Tsirkin wrote:
> > Sridhar,
> > I pushed a patchset with all known issues fixed,
> > on my vhost-net-next branch.
> >
> > For now this ignores the cpu mask issue, addressing
> > only the cgroups issue.
> >
> > Would appreciate testing and reports.
>
> I had to apply the following patch to get it build.
> With this patch, i am seeing similar results as i saw earlier.
>
> Thanks
> Sridhar
Excellent, thanks for the testing.
> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index 996e751..8543898 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -23,6 +23,7 @@
> #include <linux/highmem.h>
> #include <linux/slab.h>
> #include <linux/kthread.h>
> +#include <linux/cgroup.h>
>
> #include <linux/net.h>
> #include <linux/if_packet.h>
> @@ -252,7 +253,7 @@ static long vhost_dev_set_owner(struct vhost_dev *dev)
> }
>
> dev->worker = worker;
> - err = cgroup_attach_task_current_cg(poller);
> + err = cgroup_attach_task_current_cg(worker);
> if (err)
> goto err_cgroup;
> wake_up_process(worker); /* avoid contributing to loadavg */
>
^ permalink raw reply
* vhost mergeable buffers guest's cgroup
From: Michael S. Tsirkin @ 2010-07-28 1:27 UTC (permalink / raw)
To: Sridhar Samudrala
Cc: netdev, lkml, kvm@vger.kernel.org, Tejun Heo, Li Zefan, dlstevens
Sridhar, David,
I pushed a mergeable buffers patchset on my vhost-net-next branch,
on top of the threading changes.
This is a minimal patch, which in my testing has zero impact on
non-mergeable path.
Please give this a spin and let me know.
Thanks!
--
MST
^ permalink raw reply
* Re: vhost mergeable buffers guest's cgroup
From: Michael S. Tsirkin @ 2010-07-28 1:31 UTC (permalink / raw)
To: Sridhar Samudrala
Cc: netdev, lkml, kvm@vger.kernel.org, Tejun Heo, Li Zefan, dlstevens
In-Reply-To: <20100728012735.GA23243@redhat.com>
On Wed, Jul 28, 2010 at 04:27:35AM +0300, Michael S. Tsirkin wrote:
> Sridhar, David,
> I pushed a mergeable buffers patchset on my vhost-net-next branch,
> on top of the threading changes.
>
> This is a minimal patch, which in my testing has zero impact on
> non-mergeable path.
>
> Please give this a spin and let me know.
>
> Thanks!
The userspace bits can be found on my qemu-kvm tree at kernel.org,
branch vhost_mergeable.
Please use these for testing.
> --
> MST
^ permalink raw reply
* Re: [PATCH net-next] drivers/net/vxge/vxge-main.c: Use pr_<level> and netdev_<level>
From: Jon Mason @ 2010-07-28 3:21 UTC (permalink / raw)
To: Joe Perches
Cc: Ramkrishna Vepa, Sreenivasa Honnur, David S. Miller, netdev, LKML
In-Reply-To: <1280267223.24054.44.camel@Joe-Laptop.home>
On Tue, Jul 27, 2010 at 02:47:03PM -0700, Joe Perches wrote:
> Use pr_fmt, pr_<level> and netdev_<level> where appropriate.
>
> Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jon Mason <jon.mason@exar.com>
> ---
> drivers/net/vxge/vxge-main.c | 27 +++++++++++----------------
> 1 files changed, 11 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
> index 94d87e8..c7c5605 100644
> --- a/drivers/net/vxge/vxge-main.c
> +++ b/drivers/net/vxge/vxge-main.c
> @@ -41,6 +41,8 @@
> *
> ******************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/if_vlan.h>
> #include <linux/pci.h>
> #include <linux/slab.h>
> @@ -144,7 +146,7 @@ vxge_callback_link_up(struct __vxge_hw_device *hldev)
>
> vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
> vdev->ndev->name, __func__, __LINE__);
> - printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name);
> + netdev_notice(vdev->ndev, "Link Up\n");
> vdev->stats.link_up++;
>
> netif_carrier_on(vdev->ndev);
> @@ -168,7 +170,7 @@ vxge_callback_link_down(struct __vxge_hw_device *hldev)
>
> vxge_debug_entryexit(VXGE_TRACE,
> "%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
> - printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name);
> + netdev_notice(vdev->ndev, "Link Down\n");
>
> vdev->stats.link_down++;
> netif_carrier_off(vdev->ndev);
> @@ -2679,7 +2681,7 @@ vxge_open(struct net_device *dev)
>
> if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) {
> netif_carrier_on(vdev->ndev);
> - printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name);
> + netdev_notice(vdev->ndev, "Link Up\n");
> vdev->stats.link_up++;
> }
>
> @@ -2817,7 +2819,7 @@ int do_vxge_close(struct net_device *dev, int do_io)
> }
>
> netif_carrier_off(vdev->ndev);
> - printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name);
> + netdev_notice(vdev->ndev, "Link Down\n");
> netif_tx_stop_all_queues(vdev->ndev);
>
> /* Note that at this point xmit() is stopped by upper layer */
> @@ -3844,9 +3846,7 @@ static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
> struct vxgedev *vdev = netdev_priv(netdev);
>
> if (pci_enable_device(pdev)) {
> - printk(KERN_ERR "%s: "
> - "Cannot re-enable device after reset\n",
> - VXGE_DRIVER_NAME);
> + netdev_err(netdev, "Cannot re-enable device after reset\n");
> return PCI_ERS_RESULT_DISCONNECT;
> }
>
> @@ -3871,9 +3871,8 @@ static void vxge_io_resume(struct pci_dev *pdev)
>
> if (netif_running(netdev)) {
> if (vxge_open(netdev)) {
> - printk(KERN_ERR "%s: "
> - "Can't bring device back up after reset\n",
> - VXGE_DRIVER_NAME);
> + netdev_err(netdev,
> + "Can't bring device back up after reset\n");
> return;
> }
> }
> @@ -4430,13 +4429,9 @@ static int __init
> vxge_starter(void)
> {
> int ret = 0;
> - char version[32];
> - snprintf(version, 32, "%s", DRV_VERSION);
>
> - printk(KERN_INFO "%s: Copyright(c) 2002-2010 Exar Corp.\n",
> - VXGE_DRIVER_NAME);
> - printk(KERN_INFO "%s: Driver version: %s\n",
> - VXGE_DRIVER_NAME, version);
> + pr_info("Copyright(c) 2002-2010 Exar Corp.\n");
> + pr_info("Driver version: %s\n", DRV_VERSION);
>
> verify_bandwidth();
>
>
>
^ permalink raw reply
* Re: [PATCH net-next 0/8] bnx2x: move bnx2x to separate folder and divide to files
From: David Miller @ 2010-07-28 3:36 UTC (permalink / raw)
To: dmitry; +Cc: netdev, eilong
In-Reply-To: <1280270447.11551.119.camel@lb-tlvb-dmitry>
From: "Dmitry Kravkov" <dmitry@broadcom.com>
Date: Wed, 28 Jul 2010 01:40:47 +0300
> resubmit the series with fixes for git-apply. Thanks
All applied, thanks.
^ permalink raw reply
* Re: [net-next 2/3] stmmac: fix timer setup when use dual mac Kconfig
From: David Miller @ 2010-07-28 3:45 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev
In-Reply-To: <1280225387-26240-2-git-send-email-peppe.cavallaro@st.com>
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Tue, 27 Jul 2010 12:09:46 +0200
> The driver erroneously sets the tmrate to zero when the
> TMU initialisation fails. This actually generates problems
> while using the dual GMAC configuration.
>
> With this patch, enabling both the dual gmac and the timer
> optimisation, the first interface opened will use the tmu
> channel 2, the second one won't be able to use the timer but
> will continue to work without mitigating the interrupts by
> using the external timer (i.e. TMU channel 2).
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
This is not how we do things.
All of the options that influence the driver should be right next
to the main driver option.
What the platform SOC Kconfig's can do is 'select' those option.
But even better is to get rid of all of these feature Kconfig options,
and communicate the capability in the platform_device probe
information or similar.
^ permalink raw reply
* Re: [net-next 2/3] stmmac: fix timer setup when use dual mac Kconfig
From: David Miller @ 2010-07-28 3:45 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev
In-Reply-To: <1280225387-26240-2-git-send-email-peppe.cavallaro@st.com>
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Tue, 27 Jul 2010 12:09:46 +0200
> The driver erroneously sets the tmrate to zero when the
> TMU initialisation fails. This actually generates problems
> while using the dual GMAC configuration.
>
> With this patch, enabling both the dual gmac and the timer
> optimisation, the first interface opened will use the tmu
> channel 2, the second one won't be able to use the timer but
> will continue to work without mitigating the interrupts by
> using the external timer (i.e. TMU channel 2).
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Applied.
^ permalink raw reply
* Re: [net-next 3/3] stmmac: fix automatic PAD/FCS stripping
From: David Miller @ 2010-07-28 3:45 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev
In-Reply-To: <1280225387-26240-3-git-send-email-peppe.cavallaro@st.com>
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
Date: Tue, 27 Jul 2010 12:09:47 +0200
> For Simple Ethernet frames (802.2 and 802.3) the GMAC Core
> never strips pad and fcs. This means the ACS has no effect
> on IPv4/6 frames.
> The FL bits, in the RDES0, include the FCS so the driver
> has to remove it in SW.
> For 802.3 frame format with LLC or LLC-SNAP, when set the ACS
> bit, the HW strips both PAD and FCS.
> The FL bits, in the RDES0, actually represents the frame length
> already stripped.
> This patch fixes this logic within the device driver that
> erroneously removed 4byte from 802.3 frames already stripped
> corrupting the payload.
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Applied.
^ permalink raw reply
* Re: [net-next 2/3] stmmac: fix timer setup when use dual mac Kconfig
From: David Miller @ 2010-07-28 3:46 UTC (permalink / raw)
To: peppe.cavallaro; +Cc: netdev
In-Reply-To: <20100727.204528.149852941.davem@davemloft.net>
From: David Miller <davem@davemloft.net>
Date: Tue, 27 Jul 2010 20:45:28 -0700 (PDT)
Sorry, I meant to say this in reply to patch #1 not #2 :)
> From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
> Date: Tue, 27 Jul 2010 12:09:46 +0200
>
>> The driver erroneously sets the tmrate to zero when the
>> TMU initialisation fails. This actually generates problems
>> while using the dual GMAC configuration.
>>
>> With this patch, enabling both the dual gmac and the timer
>> optimisation, the first interface opened will use the tmu
>> channel 2, the second one won't be able to use the timer but
>> will continue to work without mitigating the interrupts by
>> using the external timer (i.e. TMU channel 2).
>>
>> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
>
> This is not how we do things.
>
> All of the options that influence the driver should be right next
> to the main driver option.
>
> What the platform SOC Kconfig's can do is 'select' those option.
>
> But even better is to get rid of all of these feature Kconfig options,
> and communicate the capability in the platform_device probe
> information or similar.
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v2] ks8842: Support DMA when accessed via timberdale
From: David Miller @ 2010-07-28 3:48 UTC (permalink / raw)
To: richard.rojfors; +Cc: netdev
In-Reply-To: <1280271421.11916.2.camel@debian>
From: Richard Röjfors <richard.rojfors@pelagicore.com>
Date: Wed, 28 Jul 2010 00:57:01 +0200
> This patch adds support for RX and TX DMA via the DMA API,
> this is only supported when the KS8842 is accessed via timberdale.
>
> There is no support for DMA on the generic bus interface it self,
> a state machine inside the FPGA is handling RX and TX transfers to/from
> buffers in the FPGA. The host CPU can do DMA to and from these buffers.
>
> The FPGA has to handle the RX interrupts, so these must be enabled in
> the ks8842 but not in the FPGA. The driver must not disable the RX interrupt
> that would mean that the data transfers into the FPGA buffers would stop.
>
> The host shall not enable TX interrupts since TX is handled by the FPGA,
> the host is notified by DMA callbacks when transfers are finished.
>
> Which DMA channels to use are added as parameters in the platform data struct.
>
> Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Applied.
^ permalink raw reply
* Re: [patch -next] ixgbe: potential null dereference
From: David Miller @ 2010-07-28 3:48 UTC (permalink / raw)
To: jeffrey.t.kirsher
Cc: error27, jesse.brandeburg, bruce.w.allan, alexander.h.duyck,
peter.p.waskiewicz.jr, john.ronciak, donald.c.skidmore,
mallikarjuna.chilakala, e1000-devel, netdev, kernel-janitors
In-Reply-To: <AANLkTim5LGj0KGs-0fGGAka7Fde3=NVVXWYBLbb_kVMs@mail.gmail.com>
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 27 Jul 2010 17:10:02 -0700
> On Tue, Jul 27, 2010 at 03:05, Dan Carpenter <error27@gmail.com> wrote:
>> The e_dev_err() macro dereferences "adapter" which is NULL here.
>>
>> Signed-off-by: Dan Carpenter <error27@gmail.com>
>
> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Applied.
^ permalink raw reply
* Re: [PATCH net-next 0/8] bnx2x: move bnx2x to separate folder and divide to files
From: David Miller @ 2010-07-28 3:56 UTC (permalink / raw)
To: dmitry; +Cc: netdev, eilong
In-Reply-To: <20100727.203640.173839576.davem@davemloft.net>
From: David Miller <davem@davemloft.net>
Date: Tue, 27 Jul 2010 20:36:40 -0700 (PDT)
> From: "Dmitry Kravkov" <dmitry@broadcom.com>
> Date: Wed, 28 Jul 2010 01:40:47 +0300
>
>> resubmit the series with fixes for git-apply. Thanks
>
> All applied, thanks.
Ummm, so what in the world did you think was going to happen
the next time I try to merge net-2.6 into net-next-2.6?
Any clue what might happen?
Any idea?
Since you not only moved the driver into a new directory,
but also moved functions all over the damn place into new
files too, the bnx2x bug fixes in net-2.6 have to be applied
by hand by me during the merge, bit by bit.
This is one of the millions of reasons I absolutely detest multi-file
drivers, people move crap around, patches from one tree can't easily
be munged into another, etc.
If it's too big to fit in one file, your driver is too damn bloated.
End of story. Put the thing into one file under drivers/net and
simplify _everyones_ life.
I'm fixing this merge mess up, but I'm very not happy about how
you guys staged this sequence of events.
^ permalink raw reply
* Re: [PATCH v2] macvlan: Fix rx counters update in macvlan_handle_frame()
From: David Miller @ 2010-07-28 4:03 UTC (permalink / raw)
To: herbert; +Cc: sri, netdev
In-Reply-To: <20100728001404.GA14038@gondor.apana.org.au>
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 28 Jul 2010 08:14:04 +0800
> On Tue, Jul 27, 2010 at 12:10:07PM -0700, Sridhar Samudrala wrote:
>> Fix macvlan_handle_frame() to update the rx counters based
>> on the return value of the vlan->receive call.
>>
>> Updated the patch to not do any packet count drops when the interface
>> is down based on Herber'ts comments.
>>
>> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
>
> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Applied to net-next-2.6, thanks.
^ permalink raw reply
* Re: [net-2.6 PATCH] e1000e: 82577/82578 PHY register access issues
From: David Miller @ 2010-07-28 4:06 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, bphilips, stable, bruce.w.allan
In-Reply-To: <20100727222808.25500.11033.stgit@localhost.localdomain>
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 27 Jul 2010 15:28:46 -0700
> From: Bruce Allan <bruce.w.allan@intel.com>
>
> The MAC-PHY interconnect on 82577/82578 uses a power management feature
> (called K1) which must be disabled when in 1Gbps due to a hardware issue on
> these parts. The #define bit setting used to enable/disable K1 is
> incorrect and can cause PHY register accesses to stop working altogether
> until the next device reset. This patch sets the register correctly.
>
> This issue is present in kernels since 2.6.32.
>
> CC: stable@kernel.org
> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH] Driver-core: Fix bluetooth network device rename regression
From: Kay Sievers @ 2010-07-28 4:41 UTC (permalink / raw)
To: Eric W. Biederman
Cc: Greg KH, Greg KH, Johannes Berg, Andrew Morton, Rafael J. Wysocki,
Maciej W. Rozycki, netdev
In-Reply-To: <m1aapcejf5.fsf@fess.ebiederm.org>
On Tue, Jul 27, 2010 at 22:53, Eric W. Biederman <ebiederm@xmission.com> wrote:
> Kay Sievers <kay.sievers@vrfy.org> writes:
>> It should only be used if it's really needed for known used userspace
>> interfaces. A few others that got converted already did not need it.
>
> Interesting. The symlink creation is slightly buggy in that it is
> created after the uevent for device creation has been sent. Which can
> lead to some interesting races in userspace.
At uevent time the 'subsystem' is specified by the 'sybsystem' link
and the SUBSYSTEM property in the event environment. The device should
not really rely on finding itself linked in class. The class and bus
link collections are only to find a group of devices of the same
subsystem, and this should not be a real world problem here.
Also there are plans to merge struct class and struct bus_type
completely and keep only a few flags around where stuff should show up
for compatibility. At that point all stuff will be created at the same
time.
> As for the rest the bus compat code is similar but not quite the same
> as the class code, so I would be extremely reluctant to deploy it
> except in extremely limited cases. Backwards compatibility is
> important, and we should strive our best to maintain backwards
> compatibility it for the kernel<->userspace ABIs.
Today, the only real difference between class and bus devices are
these 'collection links', the devices otherwise look completely the
same. There should be no important difference.
Buses are very much preferred over classes today, no new stuff should
create any class. The bus directories are extendable and have a
reasonable layout with the devices/ subdirectory, unlike the flat
class directories where people got the silly idea to mix devices lists
with attributes to confuse everything.
Kay
^ permalink raw reply
* Re: [PATCH] Driver-core: Fix bluetooth network device rename regression
From: Eric W. Biederman @ 2010-07-28 5:12 UTC (permalink / raw)
To: Kay Sievers
Cc: Greg KH, Greg KH, Johannes Berg, Andrew Morton, Rafael J. Wysocki,
Maciej W. Rozycki, netdev
In-Reply-To: <AANLkTimA9Mo0B6MOn31KQ=L+raeCUg6eH3Mqf=vB5AYz@mail.gmail.com>
Kay Sievers <kay.sievers@vrfy.org> writes:
> On Tue, Jul 27, 2010 at 22:53, Eric W. Biederman <ebiederm@xmission.com> wrote:
>> Kay Sievers <kay.sievers@vrfy.org> writes:
>
>>> It should only be used if it's really needed for known used userspace
>>> interfaces. A few others that got converted already did not need it.
>>
>> Interesting. The symlink creation is slightly buggy in that it is
>> created after the uevent for device creation has been sent. Which can
>> lead to some interesting races in userspace.
>
> At uevent time the 'subsystem' is specified by the 'sybsystem' link
> and the SUBSYSTEM property in the event environment. The device should
> not really rely on finding itself linked in class. The class and bus
> link collections are only to find a group of devices of the same
> subsystem, and this should not be a real world problem here.
I agree that there should be no real world problems.
The bottom line is that every sysfs attribute should be created
before we send the uevent or else we get horribly subtle
races or we get user space code that starts looping looking
for the interface.
> Also there are plans to merge struct class and struct bus_type
> completely and keep only a few flags around where stuff should show up
> for compatibility. At that point all stuff will be created at the same
> time.
That part seems reasonable.
>> As for the rest the bus compat code is similar but not quite the same
>> as the class code, so I would be extremely reluctant to deploy it
>> except in extremely limited cases. Backwards compatibility is
>> important, and we should strive our best to maintain backwards
>> compatibility it for the kernel<->userspace ABIs.
>
> Today, the only real difference between class and bus devices are
> these 'collection links', the devices otherwise look completely the
> same. There should be no important difference.
I don't see the class subdirectories created for bus devices, and I
don't see any equivalent. At least for the network devices this is a
huge difference, because the device namespace is controlled by
userspace and it is NOT ok to have namespace conflicts with arbitrary
sysfs attributes.
> Buses are very much preferred over classes today, no new stuff should
> create any class. The bus directories are extendable and have a
> reasonable layout with the devices/ subdirectory, unlike the flat
> class directories where people got the silly idea to mix devices lists
> with attributes to confuse everything.
Which is generally reasonable. However busses appear to have the silly
idea that it is ok to mix child child device lists of different kinds
of children with attributes and confuse everything.
At the subsystem level bus devices look better.
At the individual device level bus devices stacked on bus devices
appear to be a namespace disaster.
Eric
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox