* Re: e1000e crashes with 2.6.34.x and ThinkPad T60
From: Allan, Bruce W @ 2010-07-30 17:42 UTC (permalink / raw)
To: Marc Haber
Cc: e1000-devel@lists.sourceforge.net, Network Developers,
Linux Kernel Developers, Linux
In-Reply-To: <20100730125614.GB21444@torres.zugschlus.de>
On Friday, July 30, 2010 5:56 AM, Marc Haber wrote:
> On Mon, Jul 26, 2010 at 09:13:45AM -0700, Allan, Bruce W wrote:
>> Adding e1000-devel (the Intel LAN developers list).
>>
>> Please supply the full dmesg you meant to attach with the original
>> report, as well as the output of lspci -vvv.
>
> Stupid me.
>
> Greetings
> Marc
Please also provide an eeprom dump from the wired LOM via 'ethtool -e ethX'.
Thanks,
Bruce.
------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++ apps to Palm for a share
of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply
* Re: [PATCH 09/11] Removing dead ETRAX_NETWORK_RED_ON_NO_CONNECTION
From: Jesper Nilsson @ 2010-07-30 17:28 UTC (permalink / raw)
To: Christoph Egger
Cc: David S. Miller, Jiri Pirko, Eric Dumazet, Tejun Heo,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
vamos-dev@i4.informatik.uni-erlangen.de
In-Reply-To: <d8e76e2563bb1ced76b1629859a7dc02e8f2523c.1279110895.git.siccegge@cs.fau.de>
On Wed, Jul 14, 2010 at 02:41:20PM +0200, Christoph Egger wrote:
> ETRAX_NETWORK_RED_ON_NO_CONNECTION doesn't exist in Kconfig, therefore
> removing all references for it from the source code.
> Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
/^JN - Jesper Nilsson
--
Jesper Nilsson -- jesper.nilsson@axis.com
^ permalink raw reply
* Re: [PATCH V4] Export SMBIOS provided firmware instance and label to sysfs
From: Jesse Barnes @ 2010-07-30 16:36 UTC (permalink / raw)
To: Narendra K
Cc: netdev, linux-hotplug, linux-pci, matt_domsch, charles_rose,
jordan_hargrave, vijay_nijhawan
In-Reply-To: <20100726105650.GA19738@auslistsprd01.us.dell.com>
On Mon, 26 Jul 2010 05:56:50 -0500
Narendra K <Narendra_K@dell.com> wrote:
> Hello,
>
> V3 -> V4:
>
> Updated the contact field in Documentation/ABI directory.
>
> Please consider for inclusion -
>
> From: Narendra K <narendra_k@dell.com>
> Subject: [PATCH] Export SMBIOS provided firmware instance and label to sysfs
>
> This patch exports SMBIOS provided firmware instance and label
> of onboard pci devices to sysfs
>
Applied to linux-next, thanks.
--
Jesse Barnes, Intel Open Source Technology Center
^ permalink raw reply
* RE: [RFC PATCH v8 00/16] Provide a zero-copy method on KVM virtio-net.
From: Shirley Ma @ 2010-07-30 15:51 UTC (permalink / raw)
To: Xin, Xiaohui
Cc: netdev@vger.kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, mst@redhat.com, mingo@elte.hu,
davem@davemloft.net, herbert@gondor.apana.org.au,
jdike@linux.intel.com
In-Reply-To: <F2E9EB7348B8264F86B6AB8151CE2D791BAB307158@shsmsx502.ccr.corp.intel.com>
Hello Xiaohui,
On Fri, 2010-07-30 at 16:53 +0800, Xin, Xiaohui wrote:
> >Since vhost-net already supports macvtap/tun backends, do you think
> >whether it's better to implement zero copy in macvtap/tun than
> inducing
> >a new media passthrough device here?
> >
>
> I'm not sure if there will be more duplicated code in the kernel.
I think it should be less duplicated code in the kernel if we use
macvtap to support what media passthrough driver here. Since macvtap has
support virtio_net head and offloading already, the only missing func is
zero copy. Also QEMU supports macvtap, we just need add a zero copy flag
in option.
Thanks
Shirley
^ permalink raw reply
* Re: [RFC PATCH v8 00/16] Provide a zero-copy method on KVM virtio-net.
From: Shirley Ma @ 2010-07-30 15:46 UTC (permalink / raw)
To: Avi Kivity
Cc: xiaohui.xin, netdev, kvm, linux-kernel, mst, mingo, davem,
herbert, jdike
In-Reply-To: <4C525CD2.5080604@redhat.com>
Hello Avi,
On Fri, 2010-07-30 at 08:02 +0300, Avi Kivity wrote:
> get_user_pages() is indeed slow. But what about
> get_user_pages_fast()?
>
> Note that when the page is first touched, get_user_pages_fast() falls
> back to get_user_pages(), so the latency needs to be measured after
> quite a bit of warm-up.
Yes, I used get_user_pages_fast, however if falled back to
get_user_pages() when the apps doesn't allocate buffer on the same page.
If I run a single ping, the RTT is extremely high, but when running
multiple pings, the RTT time reduce significantly, but still it is not
as fast as copy from my initial test. I am thinking that we might need
to pre-pin memory pool.
Shirley
^ permalink raw reply
* [PATCH] nf_nat: use local variable hdrlen
From: Changli Gao @ 2010-07-30 7:58 UTC (permalink / raw)
To: Patrick McHardy; +Cc: David S. Miller, netfilter-devel, netdev, Changli Gao
use local variable hdrlen instead of ip_hdrlen(skb).
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/ipv4/netfilter/nf_nat_core.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index c7719b2..ca2e7e7 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -440,7 +440,7 @@ int nf_nat_icmp_reply_translation(struct nf_conn *ct,
if (!skb_make_writable(skb, hdrlen + sizeof(*inside)))
return 0;
- inside = (void *)skb->data + ip_hdrlen(skb);
+ inside = (void *)skb->data + hdrlen;
/* We're actually going to mangle it beyond trivial checksum
adjustment, so make sure the current checksum is correct. */
@@ -470,12 +470,10 @@ int nf_nat_icmp_reply_translation(struct nf_conn *ct,
/* rcu_read_lock()ed by nf_hook_slow */
l4proto = __nf_ct_l4proto_find(PF_INET, inside->ip.protocol);
- if (!nf_ct_get_tuple(skb,
- ip_hdrlen(skb) + sizeof(struct icmphdr),
- (ip_hdrlen(skb) +
+ if (!nf_ct_get_tuple(skb, hdrlen + sizeof(struct icmphdr),
+ (hdrlen +
sizeof(struct icmphdr) + inside->ip.ihl * 4),
- (u_int16_t)AF_INET,
- inside->ip.protocol,
+ (u_int16_t)AF_INET, inside->ip.protocol,
&inner, l3proto, l4proto))
return 0;
@@ -484,15 +482,13 @@ int nf_nat_icmp_reply_translation(struct nf_conn *ct,
pass all hooks (locally-generated ICMP). Consider incoming
packet: PREROUTING (DST manip), routing produces ICMP, goes
through POSTROUTING (which must correct the DST manip). */
- if (!manip_pkt(inside->ip.protocol, skb,
- ip_hdrlen(skb) + sizeof(inside->icmp),
- &ct->tuplehash[!dir].tuple,
- !manip))
+ if (!manip_pkt(inside->ip.protocol, skb, hdrlen + sizeof(inside->icmp),
+ &ct->tuplehash[!dir].tuple, !manip))
return 0;
if (skb->ip_summed != CHECKSUM_PARTIAL) {
/* Reloading "inside" here since manip_pkt inner. */
- inside = (void *)skb->data + ip_hdrlen(skb);
+ inside = (void *)skb->data + hdrlen;
inside->icmp.checksum = 0;
inside->icmp.checksum =
csum_fold(skb_checksum(skb, hdrlen,
^ permalink raw reply related
* Re: [PATCH] vhost: locking/rcu cleanup
From: Tejun Heo @ 2010-07-30 14:49 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: David S. Miller, Sridhar Samudrala, Jeff Dike, Juan Quintela,
Rusty Russell, Takuya Yoshikawa, David Stevens, Paul E. McKenney,
kvm, virtualization, netdev, linux-kernel
In-Reply-To: <20100729122325.GA24337@redhat.com>
Hello,
On 07/29/2010 02:23 PM, Michael S. Tsirkin wrote:
> I saw WARN_ON(!list_empty(&dev->work_list)) trigger
> so our custom flush is not as airtight as need be.
Could be but it's also possible that something has queued something
after the last flush? Is the problem reproducible?
> This patch switches to a simple atomic counter + srcu instead of
> the custom locked queue + flush implementation.
>
> This will slow down the setup ioctls, which should not matter -
> it's slow path anyway. We use the expedited flush to at least
> make sure it has a sane time bound.
>
> Works fine for me. I got reports that with many guests,
> work lock is highly contended, and this patch should in theory
> fix this as well - but I haven't tested this yet.
Hmmm... vhost_poll_flush() becomes synchronize_srcu_expedited(). Can
you please explain how it works? synchronize_srcu_expedited() is an
extremely heavy operation involving scheduling the cpu_stop task on
all cpus. I'm not quite sure whether doing it from every flush is a
good idea. Is flush supposed to be a very rare operation?
Having custom implementation is fine too but let's try to implement
something generic if at all possible.
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH repost] sched: export sched_set/getaffinity to modules
From: Tejun Heo @ 2010-07-30 14:31 UTC (permalink / raw)
To: Oleg Nesterov
Cc: Michael S. Tsirkin, Sridhar Samudrala, Peter Zijlstra,
Ingo Molnar, netdev, lkml, kvm@vger.kernel.org, Andrew Morton,
Dmitri Vorobiev, Jiri Kosina, Thomas Gleixner, Andi Kleen
In-Reply-To: <20100730141901.GA9076@redhat.com>
Hello,
On 07/30/2010 04:19 PM, Oleg Nesterov wrote:
> But I must admit, I personally dislike this idea. A kernel thread which
> is the child of the user-space process, and in fact it is not the "real"
> kernel thread. I think this is against the common case. If you do not
> care the signals/reparenting, why can't you fork the user-space process
> which does all the work via ioctl's ? OK, I do not understand the problem
> domain, probably this can't work.
Having kernel threads which are children of user process is plain
scary considering the many things parent/children relationship implies
and various bugs and security vulnerabilities in the area. I can't
pinpoint any problem but I think we really shouldn't be adding
something like this for this specific use case. If we can get away
with exporting a few symbols, let's go that way.
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH] act_nat: the checksum of ICMP doesn't have pseudo header
From: Herbert Xu @ 2010-07-30 14:30 UTC (permalink / raw)
To: Changli Gao
Cc: Jamal Hadi Salim, David S. Miller, netdev, linux-kernel,
Patrick McHardy
In-Reply-To: <AANLkTimKXsgmOSVmw-cP6Zw6UoK5CSshK38Oo5tLuAeA@mail.gmail.com>
On Fri, Jul 30, 2010 at 10:16:05PM +0800, Changli Gao wrote:
>
> I know we need to update the ICMP checksum if we alter the payload(the
> inner IP header here) of ICMP. But I doubt if the update is really
> necessary if the checksum is partial, as the checksum will be done
> later(by ether skb_checksum_help() or NIC hardware). In fact, as there
> isn't any pseudo header, the icmph->checksum should be always ZERO,
> otherwise skb_checksum_help() or NIC will give the wrong checksums,
> when the checksum is partial.
Actually you are right. I suppose the only reason this has never
shown up is because CHEKSUM_PARTIAL doesn't usually occur with
forwarded packets.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: [PATCH repost] sched: export sched_set/getaffinity to modules
From: Oleg Nesterov @ 2010-07-30 14:19 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Sridhar Samudrala, Peter Zijlstra, Tejun Heo, Ingo Molnar, netdev,
lkml, kvm@vger.kernel.org, Andrew Morton, Dmitri Vorobiev,
Jiri Kosina, Thomas Gleixner, Andi Kleen
In-Reply-To: <20100727154155.GA13419@redhat.com>
Sorry for the delay, I can't be responsive these days...
On 07/27, Michael S. Tsirkin wrote:
>
> On Mon, Jul 26, 2010 at 08:08:34PM +0200, Oleg Nesterov wrote:
> > On 07/26, Sridhar Samudrala wrote:
> > >
> > > I have been testing out a similar patch that uses kernel_thread() without CLONE_FILES
> > > flag rather than create_kthread() and then closing the files.
> >
> > !CLONE_FILES can't help. copy_files() does dup_fd() in this case.
> > The child still inherits the files.
> >
> > > Either version should be fine.
> >
> > I think neither version is fine ;)
> >
> > exit_files() is not enough too. How about the signals, reparenting?
> >
> >
> > I already forgot all details, probably I missed somethig. But it
> > seems to me that it is better to just export get/set affinity and
> > forget about all complications.
> >
> > Oleg.
>
> Oleg, so can I attach your Ack to the patch in question, and merge
> it all through net-next?
Well, I do not think you need my ack ;)
But I must admit, I personally dislike this idea. A kernel thread which
is the child of the user-space process, and in fact it is not the "real"
kernel thread. I think this is against the common case. If you do not
care the signals/reparenting, why can't you fork the user-space process
which does all the work via ioctl's ? OK, I do not understand the problem
domain, probably this can't work.
Anyway, the patch looks buggy to me. Starting from
create_kthread(&create);
wait_for_completion(&create.done);
At least you should check create_kthread() suceeds, otherwise
wait_for_completion() will hang forever. OTOH, if it suceeds then
wait_for_completion() is not needed. But this is minor.
create_kthread()->kernel_thread() uses CLONE_VM, this means that the
child will share ->mm. And this means that if the parent recieves
the coredumping signal it will hang forever in kernel space waiting
until this child exits.
This is just the immediate surprise I can see with this approach,
I am afraid there is something else.
And once again. We are doing this hacks only because we lack a
couples of exports (iiuk). This is, well, a bit strange ;)
Oleg.
^ permalink raw reply
* Re: [PATCH] act_nat: the checksum of ICMP doesn't have pseudo header
From: Changli Gao @ 2010-07-30 14:16 UTC (permalink / raw)
To: Herbert Xu
Cc: Jamal Hadi Salim, David S. Miller, netdev, linux-kernel,
Patrick McHardy
In-Reply-To: <20100730102409.GA8590@gondor.apana.org.au>
On Fri, Jul 30, 2010 at 6:24 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
>
> The checksum update is for the inner IP header. netfilter does
> of course update the checksum, it just doesn't do it here which is
> for the outer IP header.
>
I know we need to update the ICMP checksum if we alter the payload(the
inner IP header here) of ICMP. But I doubt if the update is really
necessary if the checksum is partial, as the checksum will be done
later(by ether skb_checksum_help() or NIC hardware). In fact, as there
isn't any pseudo header, the icmph->checksum should be always ZERO,
otherwise skb_checksum_help() or NIC will give the wrong checksums,
when the checksum is partial.
--
Regards,
Changli Gao(xiaosuo@gmail.com)
^ permalink raw reply
* pcap and ARP hardware type for IEEE 802.15.4
From: Jon Smirl @ 2010-07-30 14:05 UTC (permalink / raw)
To: linux-zigbee-devel, Netdev
I'm working on pcap support for the native IEEE 802.15.4
implementation in the kernel.
http://sourceforge.net/apps/trac/linux-zigbee/
pcap uses ARPHRD_ to write the DLT value into the pcap file. We need a
new DLT for the internal Linux packets since they have had the two FCS
bytes stripped from the end.
The 802.15.4 implementation has used two different ARPHRD types, one
for the active interface and one for the monitor interface. Has that
been done correctly? Should there be two types?
void ieee802154_monitor_setup(struct net_device *dev)
{
struct ieee802154_sub_if_data *priv;
dev->addr_len = 0;
dev->features = NETIF_F_NO_CSUM;
dev->hard_header_len = 0;
dev->needed_tailroom = 2; /* FCS */
dev->mtu = 127;
dev->tx_queue_len = 10;
dev->type = ARPHRD_IEEE802154_MONITOR;
dev->flags = IFF_NOARP | IFF_BROADCAST;
dev->watchdog_timeo = 0;
dev->destructor = free_netdev;
dev->netdev_ops = &ieee802154_monitor_ops;
dev->ml_priv = &mac802154_mlme;
void ieee802154_wpan_setup(struct net_device *dev)
{
struct ieee802154_sub_if_data *priv;
dev->addr_len = IEEE802154_ADDR_LEN;
memset(dev->broadcast, 0xff, IEEE802154_ADDR_LEN);
dev->features = NETIF_F_NO_CSUM;
dev->hard_header_len = 2 + 1 + 20 + 14;
dev->header_ops = &ieee802154_header_ops;
dev->needed_tailroom = 2; /* FCS */
dev->mtu = 1280;
dev->tx_queue_len = 10;
dev->type = ARPHRD_IEEE802154;
dev->flags = IFF_NOARP | IFF_BROADCAST;
dev->watchdog_timeo = 0;
dev->destructor = free_netdev;
dev->netdev_ops = &ieee802154_wpan_ops;
dev->ml_priv = &mac802154_mlme;
--
Jon Smirl
jonsmirl@gmail.com
^ permalink raw reply
* [PATCH -staging] slicoss: Remove net_device_stats from the driver's private
From: Denis Kirjanov @ 2010-07-30 13:26 UTC (permalink / raw)
To: greg; +Cc: gregkh, liodot, dkirjanov, charrer, davem, netdev, linux-kernel
Remove net_device_stats from the driver's private.
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
---
drivers/staging/slicoss/slicoss.c | 41 +++++++++++++++++++------------------
2 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index cab1a61..beab400 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -499,7 +499,6 @@ struct adapter {
struct slic_ifevents if_events;
struct slic_stats inicstats_prev;
struct slicnet_stats slic_stats;
- struct net_device_stats stats;
};
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index d442e3b..f8c4b12 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -860,6 +860,7 @@ static void slic_config_clear(struct adapter *adapter)
static bool slic_mac_filter(struct adapter *adapter,
struct ether_header *ether_frame)
{
+ struct net_device *netdev = adapter->netdev;
u32 opts = adapter->macopts;
u32 *dhost4 = (u32 *)ðer_frame->ether_dhost[0];
u16 *dhost2 = (u16 *)ðer_frame->ether_dhost[4];
@@ -879,7 +880,7 @@ static bool slic_mac_filter(struct adapter *adapter,
if (ether_frame->ether_dhost[0] & 0x01) {
if (opts & MAC_ALLMCAST) {
adapter->rcv_multicasts++;
- adapter->stats.multicast++;
+ netdev->stats.multicast++;
return true;
}
if (opts & MAC_MCAST) {
@@ -889,7 +890,7 @@ static bool slic_mac_filter(struct adapter *adapter,
if (!compare_ether_addr(mcaddr->address,
ether_frame->ether_dhost)) {
adapter->rcv_multicasts++;
- adapter->stats.multicast++;
+ netdev->stats.multicast++;
return true;
}
mcaddr = mcaddr->next;
@@ -2199,11 +2200,10 @@ static int slic_debug_card_show(struct seq_file *seq, void *v)
static int slic_debug_adapter_show(struct seq_file *seq, void *v)
{
struct adapter *adapter = seq->private;
+ struct net_device *netdev = adapter->netdev;
- if ((adapter->netdev) && (adapter->netdev->name)) {
- seq_printf(seq, "info: interface : %s\n",
+ seq_printf(seq, "info: interface : %s\n",
adapter->netdev->name);
- }
seq_printf(seq, "info: status : %s\n",
SLIC_LINKSTATE(adapter->linkstate));
seq_printf(seq, "info: port : %d\n",
@@ -2221,9 +2221,9 @@ static int slic_debug_adapter_show(struct seq_file *seq, void *v)
seq_printf(seq, "info: RcvQ current : %4.4X\n",
adapter->rcvqueue.count);
seq_printf(seq, "rx stats: packets : %8.8lX\n",
- adapter->stats.rx_packets);
+ netdev->stats.rx_packets);
seq_printf(seq, "rx stats: bytes : %8.8lX\n",
- adapter->stats.rx_bytes);
+ netdev->stats.rx_bytes);
seq_printf(seq, "rx stats: broadcasts : %8.8X\n",
adapter->rcv_broadcasts);
seq_printf(seq, "rx stats: multicasts : %8.8X\n",
@@ -2237,13 +2237,13 @@ static int slic_debug_adapter_show(struct seq_file *seq, void *v)
seq_printf(seq, "rx stats: drops : %8.8X\n",
(u32) adapter->rcv_drops);
seq_printf(seq, "tx stats: packets : %8.8lX\n",
- adapter->stats.tx_packets);
+ netdev->stats.tx_packets);
seq_printf(seq, "tx stats: bytes : %8.8lX\n",
- adapter->stats.tx_bytes);
+ netdev->stats.tx_bytes);
seq_printf(seq, "tx stats: errors : %8.8X\n",
(u32) adapter->slic_stats.iface.xmt_errors);
seq_printf(seq, "rx stats: multicasts : %8.8lX\n",
- adapter->stats.multicast);
+ netdev->stats.multicast);
seq_printf(seq, "tx stats: collision errors : %8.8X\n",
(u32) adapter->slic_stats.iface.xmit_collisions);
seq_printf(seq, "perf: Max rcv frames/isr : %8.8X\n",
@@ -2620,13 +2620,14 @@ static void slic_xmit_fail(struct adapter *adapter,
}
}
dev_kfree_skb(skb);
- adapter->stats.tx_dropped++;
+ adapter->netdev->stats.tx_dropped++;
}
static void slic_rcv_handle_error(struct adapter *adapter,
struct slic_rcvbuf *rcvbuf)
{
struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
+ struct net_device *netdev = adapter->netdev;
if (adapter->devid != SLIC_1GB_DEVICE_ID) {
if (hdr->frame_status14 & VRHSTAT_802OE)
@@ -2637,15 +2638,15 @@ static void slic_rcv_handle_error(struct adapter *adapter,
adapter->if_events.uflow802++;
if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
adapter->if_events.rcvearly++;
- adapter->stats.rx_fifo_errors++;
+ netdev->stats.rx_fifo_errors++;
}
if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
adapter->if_events.Bufov++;
- adapter->stats.rx_over_errors++;
+ netdev->stats.rx_over_errors++;
}
if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
adapter->if_events.Carre++;
- adapter->stats.tx_carrier_errors++;
+ netdev->stats.tx_carrier_errors++;
}
if (hdr->frame_status_b14 & VRHSTATB_LONGE)
adapter->if_events.Longe++;
@@ -2653,7 +2654,7 @@ static void slic_rcv_handle_error(struct adapter *adapter,
adapter->if_events.Invp++;
if (hdr->frame_status_b14 & VRHSTATB_CRC) {
adapter->if_events.Crc++;
- adapter->stats.rx_crc_errors++;
+ netdev->stats.rx_crc_errors++;
}
if (hdr->frame_status_b14 & VRHSTATB_DRBL)
adapter->if_events.Drbl++;
@@ -2719,6 +2720,7 @@ static void slic_rcv_handle_error(struct adapter *adapter,
static void slic_rcv_handler(struct adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
struct sk_buff *skb;
struct slic_rcvbuf *rcvbuf;
u32 frames = 0;
@@ -2744,8 +2746,8 @@ static void slic_rcv_handler(struct adapter *adapter)
skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
skb_put(skb, rx_bytes);
- adapter->stats.rx_packets++;
- adapter->stats.rx_bytes += rx_bytes;
+ netdev->stats.rx_packets++;
+ netdev->stats.rx_bytes += rx_bytes;
#if SLIC_OFFLOAD_IP_CHECKSUM
skb->ip_summed = CHECKSUM_UNNECESSARY;
#endif
@@ -2939,8 +2941,8 @@ static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
if (skbtype == NORMAL_ETHFRAME)
slic_xmit_build_request(adapter, hcmd, skb);
}
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += skb->len;
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
#ifdef DEBUG_DUMP
if (adapter->kill_card) {
@@ -2972,7 +2974,6 @@ xmit_fail:
static void slic_adapter_freeresources(struct adapter *adapter)
{
slic_init_cleanup(adapter);
- memset(&adapter->stats, 0, sizeof(struct net_device_stats));
adapter->error_interrupts = 0;
adapter->rcv_interrupts = 0;
adapter->xmit_interrupts = 0;
^ permalink raw reply related
* Re: RPS vs. hard-irq-context netif_rx()
From: Johannes Berg @ 2010-07-30 13:21 UTC (permalink / raw)
To: netdev
In-Reply-To: <1280495027.3710.13.camel@jlt3.sipsolutions.net>
On Fri, 2010-07-30 at 15:03 +0200, Johannes Berg wrote:
> The reason seems to be that
> * RCU_TREE uses local_bh_disable/enable
> * CONFIG_RPS uses RCU within netif_rx()
> * the driver I'm using calls netif_rx() within the irq context
>
> So .. where's the bug? I'd point to CONFIG_RPS since it's newest.
Disabling RPS gives me the same result due to netpoll since
commit de85d99eb7b595f6751550184b94c1e2f74a828b
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Jun 10 16:12:44 2010 +0000
netpoll: Fix RCU usage
Disabling netpoll as well gets me a warning-free boot, but I suspect
that's not really what it should be like...
johannes
^ permalink raw reply
* RPS vs. hard-irq-context netif_rx()
From: Johannes Berg @ 2010-07-30 13:03 UTC (permalink / raw)
To: netdev
I got the following on a kvm instance I use for testing:
[ 51.358803] WARNING: at kernel/lockdep.c:2327 trace_hardirqs_on_caller+0x167/0x200()
[ 51.360210] Hardware name: Bochs
[ 51.360210] Modules linked in:
[ 51.360210] Pid: 1546, comm: dhclient3 Tainted: G W 2.6.35-rc6-wl+ #588
[ 51.360210] Call Trace:
[ 51.360210] <IRQ> [<ffffffff8104e87f>] warn_slowpath_common+0x7f/0xc0
[ 51.360210] [<ffffffff8104e8da>] warn_slowpath_null+0x1a/0x20
[ 51.360210] [<ffffffff81087977>] trace_hardirqs_on_caller+0x167/0x200
[ 51.360210] [<ffffffff81087a1d>] trace_hardirqs_on+0xd/0x10
[ 51.360210] [<ffffffff81056ade>] local_bh_enable+0x9e/0x130
[ 51.360210] [<ffffffff8139fa82>] netif_rx+0xc2/0x250
[ 51.360210] [<ffffffff813146d7>] ei_receive+0x1b7/0x2c0
[ 51.360210] [<ffffffff81314ca2>] __ei_interrupt+0x282/0x360
[ 51.360210] [<ffffffff81314dce>] ei_interrupt+0xe/0x10
[ 51.360210] [<ffffffff810abe85>] handle_IRQ_event+0x85/0x300
[ 51.360210] [<ffffffff810aead5>] handle_level_irq+0x95/0x120
[ 51.360210] [<ffffffff81005a12>] handle_irq+0x22/0x30
[ 51.360210] [<ffffffff814394b3>] do_IRQ+0x73/0xf0
...
The reason seems to be that
* RCU_TREE uses local_bh_disable/enable
* CONFIG_RPS uses RCU within netif_rx()
* the driver I'm using calls netif_rx() within the irq context
So .. where's the bug? I'd point to CONFIG_RPS since it's newest.
johannes
^ permalink raw reply
* Re: e1000e crashes with 2.6.34.x and ThinkPad T60
From: Marc Haber @ 2010-07-30 12:56 UTC (permalink / raw)
To: Allan, Bruce W
Cc: Linux Kernel Developers, Linux Kernel Network Developers,
e1000-devel@lists.sourceforge.net
In-Reply-To: <8DD2590731AB5D4C9DBF71A877482A9001623EC48E@orsmsx509.amr.corp.intel.com>
[-- Attachment #1: Type: text/plain, Size: 576 bytes --]
On Mon, Jul 26, 2010 at 09:13:45AM -0700, Allan, Bruce W wrote:
> Adding e1000-devel (the Intel LAN developers list).
>
> Please supply the full dmesg you meant to attach with the original
> report, as well as the output of lspci -vvv.
Stupid me.
Greetings
Marc
--
-----------------------------------------------------------------------------
Marc Haber | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany | lose things." Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature | How to make an American Quilt | Fax: *49 3221 2323190
[-- Attachment #2: lspci-vvv --]
[-- Type: text/plain, Size: 13326 bytes --]
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
Subsystem: Lenovo ThinkPad T60
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ee100000-ee1fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at ee400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: ee000000-ee0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00005fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: ea000000-ebffffff
Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ee404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 0000a000-0000dfff
Memory behind bridge: e4300000-e7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1880 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at 18c8 [size=8]
Region 1: I/O ports at 18ac [size=4]
Region 2: I/O ports at 18c0 [size=8]
Region 3: I/O ports at 18a8 [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at ee404400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 18e0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA controller])
Subsystem: Lenovo Thinkpad T60 model 2007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at ee100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at ee120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Subsystem: Lenovo ThinkPad T60
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 3000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Subsystem: Intel Corporation ThinkPad R60e/X60s
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Subsystem: Lenovo ThinkPad T60/R60 series
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: e0000000-e3fff000 (prefetchable)
Memory window 1: c4000000-c7fff000
I/O window 0: 0000a000-0000a0ff
I/O window 1: 0000a400-0000a4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
[-- Attachment #3: dmesg.e1000e --]
[-- Type: text/plain, Size: 31346 bytes --]
g unused kernel memory: 456k freed
[ 5.136990] Write protecting the kernel text: 2632k
[ 5.137063] Write protecting the kernel read-only data: 900k
[ 5.195608] udev: starting version 158
[ 5.305722] acpi device:05: registered as cooling_device2
[ 5.305918] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input4
[ 5.305926] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 5.325995] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.326260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.326263] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.326375] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.326640] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.326651] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.326661] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.326665] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.326730] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.326773] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 5.326820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.326823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.326826] usb usb1: Product: UHCI Host Controller
[ 5.326829] usb usb1: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.326831] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.326940] hub 1-0:1.0: USB hub found
[ 5.326946] hub 1-0:1.0: 2 ports detected
[ 5.327182] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 5.327347] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 5.327359] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.327375] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.327380] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.327420] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.327439] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 5.327452] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.331327] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.331343] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
[ 5.336651] Linux agpgart interface v0.103
[ 5.339991] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 5.339994] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 5.340095] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.340120] e1000e 0000:02:00.0: setting latency timer to 64
[ 5.340309] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 5.340699] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 5.344102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.344105] libata version 3.00 loaded.
[ 5.344138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.344142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.344145] usb usb2: Product: EHCI Host Controller
[ 5.344148] usb usb2: Manufacturer: Linux 2.6.34.1-zgws1 ehci_hcd
[ 5.344150] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.344357] hub 2-0:1.0: USB hub found
[ 5.344364] hub 2-0:1.0: 8 ports detected
[ 5.344482] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.344490] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.344495] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.344535] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.344577] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 5.344615] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.344618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.344621] usb usb3: Product: UHCI Host Controller
[ 5.344623] usb usb3: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.344626] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.344720] hub 3-0:1.0: USB hub found
[ 5.344725] hub 3-0:1.0: 2 ports detected
[ 5.347870] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 5.348150] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 5.348161] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.348169] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.348174] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.348225] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.348262] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 5.348306] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.348309] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.348312] usb usb4: Product: UHCI Host Controller
[ 5.348314] usb usb4: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.348317] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.348420] hub 4-0:1.0: USB hub found
[ 5.348425] hub 4-0:1.0: 2 ports detected
[ 5.348500] ata_piix 0000:00:1f.1: version 2.13
[ 5.348510] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 5.348554] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.348648] scsi0 : ata_piix
[ 5.348747] scsi1 : ata_piix
[ 5.349523] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 5.349527] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 5.349577] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.349585] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.349589] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.349640] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.349669] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 5.349711] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.349714] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.349717] usb usb5: Product: UHCI Host Controller
[ 5.349720] usb usb5: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.349723] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.349830] hub 5-0:1.0: USB hub found
[ 5.349836] hub 5-0:1.0: 2 ports detected
[ 5.350121] ata2: port disabled. ignoring.
[ 5.431411] ahci 0000:00:1f.2: version 3.0
[ 5.431430] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 5.431485] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 5.431560] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 5.431564] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.431570] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.431727] scsi2 : ahci
[ 5.431804] scsi3 : ahci
[ 5.431867] scsi4 : ahci
[ 5.431940] scsi5 : ahci
[ 5.432058] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 30
[ 5.432061] ata4: DUMMY
[ 5.432062] ata5: DUMMY
[ 5.432064] ata6: DUMMY
[ 5.457464] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:da:7d:6b
[ 5.457468] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.457606] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 5.512573] ata1.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33
[ 5.528495] ata1.00: configured for UDMA/33
[ 5.530345] scsi 0:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5
[ 5.657080] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 5.748096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.749280] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.749285] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.749289] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.750372] ata3.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
[ 5.750375] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.751707] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.751712] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.751716] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.752839] ata3.00: configured for UDMA/133
[ 5.770575] ata3.00: configured for UDMA/133
[ 5.770578] ata3: EH complete
[ 5.770658] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[ 5.779704] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.779774] sd 2:0:0:0: [sda] Write Protect is off
[ 5.779777] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.779806] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.779969] sda:
[ 5.790425] usb 2-5: New USB device found, idVendor=14cd, idProduct=121c
[ 5.790432] usb 2-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 5.790438] usb 2-5: Product: Mass Storage Device
[ 5.790443] usb 2-5: Manufacturer: Generic
[ 5.790448] usb 2-5: SerialNumber: 812320090519
[ 5.798461] Initializing USB Mass Storage driver...
[ 5.798567] scsi6 : usb-storage 2-5:1.0
[ 5.798660] usbcore: registered new interface driver usb-storage
[ 5.798663] USB Mass Storage support registered.
[ 5.900051] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 6.032419] usb 2-6: New USB device found, idVendor=04b3, idProduct=4485
[ 6.032422] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.032816] hub 2-6:1.0: USB hub found
[ 6.032905] hub 2-6:1.0: 4 ports detected
[ 6.116519] sda1
[ 6.116789] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.122759] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.122763] Uniform CD-ROM driver Revision: 3.20
[ 6.122859] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.127582] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.127624] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.333225] [drm] Initialized drm 1.1.0 20060810
[ 6.370123] [drm] radeon kernel modesetting enabled.
[ 6.370243] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 6.370290] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 6.370306] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.370325] radeon 0000:01:00.0: setting latency timer to 64
[ 6.372102] [drm] initializing kernel modesetting (RV515 0x1002:0x7145).
[ 6.381089] [drm] register mmio base: 0xEE100000
[ 6.381092] [drm] register mmio size: 65536
[ 6.381258] ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP
[ 6.381493] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 6.381506] [drm] 5 Power State(s)
[ 6.381509] [drm] State 0 Battery
[ 6.381511] [drm] 1 PCIE Lanes
[ 6.381512] [drm] 1 Clock Mode(s)
[ 6.381514] [drm] 0 engine/memory: 129000/135000
[ 6.381517] [drm] State 1 Battery
[ 6.381518] [drm] 1 PCIE Lanes
[ 6.381520] [drm] 1 Clock Mode(s)
[ 6.381522] [drm] 0 engine/memory: 210000/135000
[ 6.381525] [drm] State 2 Powersave
[ 6.381526] [drm] 1 PCIE Lanes
[ 6.381528] [drm] 1 Clock Mode(s)
[ 6.381530] [drm] 0 engine/memory: 324000/135000
[ 6.381533] [drm] State 3 Default
[ 6.381534] [drm] 16 PCIE Lanes
[ 6.381536] [drm] 1 Clock Mode(s)
[ 6.381538] [drm] 0 engine/memory: 342000/350000
[ 6.381540] [drm] State 4 Default (default)
[ 6.381542] [drm] 16 PCIE Lanes
[ 6.381544] [drm] 1 Clock Mode(s)
[ 6.381546] [drm] 0 engine/memory: 392000/350000
[ 6.381555] [drm] radeon: power management initialized
[ 6.381565] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.381575] radeon 0000:01:00.0: VRAM: 128M 0x00000000 - 0x07FFFFFF (128M used)
[ 6.381579] radeon 0000:01:00.0: GTT: 512M 0x08000000 - 0x27FFFFFF
[ 6.381765] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[ 6.381777] [drm] radeon: using MSI.
[ 6.381829] [drm] radeon: irq initialized.
[ 6.382609] [drm] Detected VRAM RAM=128M, BAR=128M
[ 6.382612] [drm] RAM width 128bits DDR
[ 6.382728] [TTM] Zone kernel: Available graphics memory: 439548 kiB.
[ 6.382731] [TTM] Zone highmem: Available graphics memory: 1557152 kiB.
[ 6.382749] [drm] radeon: 128M of VRAM memory ready
[ 6.382752] [drm] radeon: 512M of GTT memory ready.
[ 6.382773] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.385802] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[ 6.385838] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 6.387136] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 6.387162] [drm] radeon: cp idle (0x10000C03)
[ 6.387201] [drm] Loading R500 Microcode
[ 6.387205] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 6.390354] [drm] radeon: ring at 0x0000000008000000
[ 6.390413] [drm] ring test succeeded in 4 usecs
[ 6.390598] [drm] radeon: ib pool ready.
[ 6.390699] [drm] ib test succeeded in 0 usecs
[ 6.390728] [drm] Unknown TV standard; defaulting to NTSC
[ 6.390899] [drm] Radeon Display Connectors
[ 6.390901] [drm] Connector 0:
[ 6.390903] [drm] VGA
[ 6.390906] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.390908] [drm] Encoders:
[ 6.390910] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.390912] [drm] Connector 1:
[ 6.390914] [drm] LVDS
[ 6.390916] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 6.390919] [drm] Encoders:
[ 6.390921] [drm] LCD1: INTERNAL_LVTM1
[ 6.390923] [drm] Connector 2:
[ 6.390924] [drm] DVI-I
[ 6.390926] [drm] HPD1
[ 6.390929] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 6.390931] [drm] Encoders:
[ 6.390933] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 6.496045] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 6.663730] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 6.663734] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.663737] usb 5-1: Product: BCM2045B
[ 6.663740] usb 5-1: Manufacturer: Broadcom Corp
[ 6.664949] [drm] fb mappable at 0xD80C0000
[ 6.664952] [drm] vram apper at 0xD8000000
[ 6.664954] [drm] size 7680000
[ 6.664955] [drm] fb depth is 24
[ 6.664957] [drm] pitch is 6400
[ 6.720466] Console: switching to colour frame buffer device 175x65
[ 6.727852] fb0: radeondrmfb frame buffer device
[ 6.727855] registered panic notifier
[ 6.727860] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
[ 6.797816] scsi 6:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
[ 6.798745] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.799280] sd 6:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 6.799778] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.799782] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6.799785] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.803028] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.803093] sdb: sdb4
[ 6.806035] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.806104] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.908037] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 6.909069] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 7.080708] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 7.080712] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.080716] usb 5-2: Product: Biometric Coprocessor
[ 7.080718] usb 5-2: Manufacturer: STMicroelectronics
[ 7.156174] usb 2-6.2: new low speed USB device using ehci_hcd and address 6
[ 7.252631] usb 2-6.2: New USB device found, idVendor=1bcf, idProduct=0007
[ 7.252636] usb 2-6.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.252639] usb 2-6.2: Product: USB Optical Mouse
[ 7.261671] usbcore: registered new interface driver hiddev
[ 7.264938] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input5
[ 7.265271] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-6.2/input0
[ 7.265417] usbcore: registered new interface driver usbhid
[ 7.265420] usbhid: USB HID core driver
[ 7.615658] md: raid1 personality registered for level 1
[ 7.684070] raid6: int32x1 571 MB/s
[ 7.752038] raid6: int32x2 697 MB/s
[ 7.820149] raid6: int32x4 576 MB/s
[ 7.888098] raid6: int32x8 472 MB/s
[ 7.956028] raid6: mmxx1 1813 MB/s
[ 8.024031] raid6: mmxx2 2075 MB/s
[ 8.092034] raid6: sse1x1 1376 MB/s
[ 8.160034] raid6: sse1x2 1852 MB/s
[ 8.228010] raid6: sse2x1 2106 MB/s
[ 8.296030] raid6: sse2x2 2336 MB/s
[ 8.296033] raid6: using algorithm sse2x2 (2336 MB/s)
[ 8.297410] xor: automatically using best checksumming function: pIII_sse
[ 8.316009] pIII_sse : 4994.000 MB/sec
[ 8.316011] xor: using function: pIII_sse (4994.000 MB/sec)
[ 8.321750] md: raid6 personality registered for level 6
[ 8.321753] md: raid5 personality registered for level 5
[ 8.321755] md: raid4 personality registered for level 4
[ 10.474844] PM: Starting manual resume from disk
[ 10.490588] EXT3-fs (dm-12): recovery required on readonly filesystem
[ 10.490593] EXT3-fs (dm-12): write access will be enabled during recovery
[ 10.515959] EXT3-fs (dm-12): recovery complete
[ 10.515984] kjournald starting. Commit interval 5 seconds
[ 10.524577] EXT3-fs (dm-12): mounted filesystem with writeback data mode
[ 12.234536] udev: starting version 158
[ 12.603415] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 12.688053] Bluetooth: Core ver 2.15
[ 12.688298] NET: Registered protocol family 31
[ 12.688301] Bluetooth: HCI device and connection manager initialized
[ 12.688304] Bluetooth: HCI socket layer initialized
[ 12.712827] Non-volatile memory driver v1.3
[ 12.713683] intel_rng: FWH not detected
[ 12.714101] rtc_cmos 00:07: RTC can wake from S4
[ 12.714154] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 12.714191] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 12.838929] cfg80211: Calling CRDA to update world regulatory domain
[ 12.852309] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.852786] usbcore: registered new interface driver btusb
[ 12.868136] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 13.000907] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 13.000913] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 13.000922] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff]
[ 13.000926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff: excluding 0xa000-0xa0ff 0xa400-0xa4ff
[ 13.050121] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 13.050126] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
[ 13.050143] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 13.050146] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
[ 13.050165] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
[ 13.050169] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0xcf7: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 0x800-0x80f
[ 13.056877] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
[ 13.056881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd00-0xffff: excluding 0x1000-0x107f 0x1180-0x11bf 0x15e0-0x15ef 0x1600-0x1607 0x1610-0x161f 0x1648-0x165f 0x1680-0x169f 0x1800-0x188f 0x18a8-0x18cf 0x18e0-0x18ff 0x2000-0xa0ff 0xa400-0xa4ff
[ 13.107526] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
[ 13.107531] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding 0xa0000-0xbffff
[ 13.107546] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
[ 13.107550] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
[ 13.107555] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
[ 13.107559] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
[ 13.107564] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xfebfffff]
[ 13.107568] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xfebfffff: excluding 0xc0000000-0xc07fffff 0xc4000000-0xc7ffffff 0xd8000000-0xe47fffff 0xe8000000-0xee7fffff 0xf0000000-0xf3ffffff 0xfe800000-0xfeffffff
[ 13.107687] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xfed40000-0xfed40fff]
[ 13.107690] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfed40000-0xfed40fff: excluding 0xfed40000-0xfed41fff
[ 13.126470] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 13.126473] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 13.126476] thinkpad_acpi: ThinkPad BIOS 79ETE6WW (2.26 ), EC 79HT50WW-1.07
[ 13.126478] thinkpad_acpi: Lenovo ThinkPad T60, model 2007VC8
[ 13.127070] thinkpad_acpi: radio switch found; radios are enabled
[ 13.127182] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 13.127185] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 13.134783] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 13.135263] Registered led device: tpacpi::thinklight
[ 13.135504] Registered led device: tpacpi::power
[ 13.135525] Registered led device: tpacpi::standby
[ 13.135541] Registered led device: tpacpi::thinkvantage
[ 13.138101] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 13.138192] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 13.140903] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 13.352454] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 13.352459] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.394122] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 13.452301] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 13.452305] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 13.452439] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.452454] iwl3945 0000:03:00.0: setting latency timer to 64
[ 13.460945] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7
[ 13.465882] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
[ 13.467416] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 13.469061] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 13.469129] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 13.469194] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 13.469264] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 13.508754] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 13.508758] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 13.508903] iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
[ 13.590288] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.689824] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.689829] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 13.689898] HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
[ 13.689935] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.771713] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 14.272085] EXT3-fs (dm-12): using internal journal
[ 18.863934] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 19.096023] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 20.805639] usb 2-5: USB disconnect, address 2
[ 22.247194] Adding 3145208k swap on /dev/mapper/swap0. Priority:-1 extents:1 across:3145208k
[ 33.161570] kjournald starting. Commit interval 5 seconds
[ 33.178321] EXT3-fs (dm-14): using internal journal
[ 33.178327] EXT3-fs (dm-14): mounted filesystem with writeback data mode
[ 33.209284] kjournald starting. Commit interval 5 seconds
[ 33.236197] EXT3-fs (dm-17): using internal journal
[ 33.236204] EXT3-fs (dm-17): mounted filesystem with writeback data mode
[ 33.328798] kjournald starting. Commit interval 5 seconds
[ 33.329055] EXT3-fs (dm-15): using internal journal
[ 33.329060] EXT3-fs (dm-15): mounted filesystem with writeback data mode
[ 33.381481] kjournald starting. Commit interval 5 seconds
[ 33.381722] EXT3-fs (dm-16): using internal journal
[ 33.381726] EXT3-fs (dm-16): mounted filesystem with writeback data mode
[ 33.455836] kjournald starting. Commit interval 5 seconds
[ 33.456067] EXT3-fs (dm-18): using internal journal
[ 33.456071] EXT3-fs (dm-18): mounted filesystem with writeback data mode
[ 33.488303] kjournald starting. Commit interval 5 seconds
[ 33.488541] EXT3-fs (dm-20): using internal journal
[ 33.488546] EXT3-fs (dm-20): mounted filesystem with writeback data mode
[ 33.532337] kjournald starting. Commit interval 5 seconds
[ 33.532595] EXT3-fs (dm-19): using internal journal
[ 33.532600] EXT3-fs (dm-19): mounted filesystem with writeback data mode
[ 37.140935] NET: Registered protocol family 10
[ 37.141485] lo: Disabled Privacy Extensions
[ 37.448469] Bridge firewalling registered
[ 38.784920] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 38.784924] All bugs added by David S. Miller <davem@redhat.com>
[ 39.849498] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 39.904216] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 39.904760] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.191010] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 40.238930] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 40.325080] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.822705] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 41.822709] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 41.822986] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 42.017500] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 42.017504] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 42.017506] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 42.017508] vboxdrv: the usage of hardware performance counters by
[ 42.017509] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 42.017514] vboxdrv: Found 2 processor cores.
[ 42.017598] vboxdrv: fAsync=1 offMin=0x8a9e4 offMax=0x8a9e4
[ 42.017661] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 42.017663] vboxdrv: Successfully loaded version 3.2.6_OSE (interface 0x00140001).
[ 44.069208] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.123908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 44.124123] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 44.124126] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 44.124128] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 46.810862] Bluetooth: L2CAP ver 2.14
[ 46.810865] Bluetooth: L2CAP socket layer initialized
[ 47.187334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.187338] Bluetooth: BNEP filters: protocol multicast
[ 47.207756] Bluetooth: SCO (Voice Link) ver 0.6
[ 47.207759] Bluetooth: SCO socket layer initialized
[ 47.552041] br0: no IPv6 routers present
[ 47.668350] Bluetooth: RFCOMM TTY layer initialized
[ 47.668356] Bluetooth: RFCOMM socket layer initialized
[ 47.668359] Bluetooth: RFCOMM ver 1.11
[ 49.332627] lp: driver loaded but no devices found
[ 49.552630] ppdev: user-space parallel port driver
[ 51.984045] eth0: no IPv6 routers present
[ 52.433070] device eth0 entered promiscuous mode
[ 68.095028] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 83.852628] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 84.117958] device eth0 left promiscuous mode
[ 84.137558] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 84.192247] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 84.192961] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 84.414159] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 86.818732] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 86.818739] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 86.819230] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 89.373315] wlan0: authenticate with 00:24:fe:01:97:12 (try 1)
[ 89.378150] wlan0: authenticated
[ 89.378747] wlan0: associate with 00:24:fe:01:97:12 (try 1)
[ 89.381931] wlan0: RX AssocResp from 00:24:fe:01:97:12 (capab=0x431 status=0 aid=3)
[ 89.381938] wlan0: associated
[ 89.383699] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 97.496054] eth0: no IPv6 routers present
[ 100.108053] wlan0: no IPv6 routers present
[ 365.914822] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 365.916906] input: Logitech Elite Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:11/input10
[ 365.917244] generic-bluetooth 0005:046D:B301.0002: input,hidraw1: BLUETOOTH HID v23.02 Keyboard [Logitech Elite Keyboard] on 00:16:CF:E2:32:E8
[ 428.014455] input: Logitech MX900 Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:12/input11
[ 428.014650] generic-bluetooth 0005:046D:B001.0003: input,hidraw2: BLUETOOTH HID v22.00 Mouse [Logitech MX900 Mouse] on 00:16:CF:E2:32:E8
[ 481.548066] wlan0: deauthenticating from 00:24:fe:01:97:12 by local choice (reason=3)
[ 481.596063] cfg80211: Calling CRDA to update world regulatory domain
[ 481.693087] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 482.016409] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.074538] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.075276] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 482.272438] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.332208] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.332878] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 484.382698] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 484.382703] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 484.382982] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 495.340033] eth0: no IPv6 routers present
[ 670.979820] tun: Universal TUN/TAP device driver, 1.6
[ 670.979827] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 670.980928] tun0: Disabled Privacy Extensions
^ permalink raw reply
* Re: e1000e crashes with 2.6.34.x and ThinkPad T60
From: Marc Haber @ 2010-07-30 12:54 UTC (permalink / raw)
To: Tantilov, Emil S; +Cc: Linux Kernel Developers, Linux Kernel Network Developers
In-Reply-To: <EA929A9653AAE14F841771FB1DE5A1366000F42E28@rrsmsx501.amr.corp.intel.com>
[-- Attachment #1: Type: text/plain, Size: 1951 bytes --]
Hi,
On Tue, Jul 27, 2010 at 06:33:49PM -0600, Tantilov, Emil S wrote:
> Marc Haber wrote:
> > I have a new notebook, a Thinkpad T60, which is freezing in random
> > intervals (like 30 minutes to two days) as long as I am using the
> > on-board wired ethernet interface, which is an e1000e, [8086:109a]. As
> > long as I keep using the WLAN, the system runs for weeks despite
> > frequent suspend/resume cycles etc. The crashes seem really to be tied
> > to using the wired ethernet. This is a hard freeze, with nothing
> > happening on the system, only a long push on the power button helps.
>
> When the crashes occur - is there a trace on the screen?
Not that I can see any. I'm working in X11, and the screen simply
freezes. Mouse doesn't move any more, clock stops. System is not
pingable, does not react to Ctrl-Alt-Bksp nor to any Magic Sysrq, nor
does it shut down when I have the power button issue an acpi shutdown
event.
> Do you know of a way to reproduce the issue? For example were
> you downloading files, browsing internet, or using the ethernet device
> in any way when the system crashed?
Sadly, no. I have it happen when typing in a remote ssh session, while
on the other hand hundreds of megabytes can be downloaded just fine.
It just happens "at random", two or three times a day. I have resorted
to using the WLAN instead of the wired ethernet, but that's not a
long-term solution.
> > Full dmesg and lspci-nn attached, please say if you need more.
>
> Doesn't seem that there were any attachments to this email.
I forgot, sorry.
> Could you also provide the kernel config?
Attached as well.
Greetings
Marc
--
-----------------------------------------------------------------------------
Marc Haber | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany | lose things." Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature | How to make an American Quilt | Fax: *49 3221 2323190
[-- Attachment #2: config-2.6.34.1-zgws1 --]
[-- Type: text/plain, Size: 96539 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34.1
# Tue Jul 6 06:45:30 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=m
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
# CONFIG_MICREL_PHY is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_CS89x0 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_CNIC=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
# CONFIG_B43_SDIO is not set
CONFIG_B43_PIO=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
# CONFIG_IPW2200_MONITOR is not set
# CONFIG_IPW2200_QOS is not set
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=m
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_HTCPEN is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_TLG2300 is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
CONFIG_DVB_BUDGET_AV=m
# CONFIG_DVB_BUDGET_PATCH is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
# CONFIG_DVB_FIREDTV is not set
#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set
#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set
#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_KMS is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_ISA=y
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_JAZZ16 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_MSND_PINNACLE is not set
# CONFIG_SND_MSND_CLASSIC is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=m
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_IPOIB is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
#
# TI VLYNQ
#
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="UTF-8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Attachment #3: lspci-nn --]
[-- Type: text/plain, Size: 2281 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145]
02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a]
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02)
15:00.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
[-- Attachment #4: dmesg.e1000e --]
[-- Type: text/plain, Size: 31346 bytes --]
g unused kernel memory: 456k freed
[ 5.136990] Write protecting the kernel text: 2632k
[ 5.137063] Write protecting the kernel read-only data: 900k
[ 5.195608] udev: starting version 158
[ 5.305722] acpi device:05: registered as cooling_device2
[ 5.305918] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input4
[ 5.305926] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 5.325995] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.326260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.326263] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.326375] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.326640] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.326651] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.326661] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.326665] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.326730] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.326773] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 5.326820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.326823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.326826] usb usb1: Product: UHCI Host Controller
[ 5.326829] usb usb1: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.326831] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.326940] hub 1-0:1.0: USB hub found
[ 5.326946] hub 1-0:1.0: 2 ports detected
[ 5.327182] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 5.327347] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 5.327359] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.327375] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.327380] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.327420] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.327439] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 5.327452] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.331327] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.331343] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
[ 5.336651] Linux agpgart interface v0.103
[ 5.339991] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 5.339994] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 5.340095] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.340120] e1000e 0000:02:00.0: setting latency timer to 64
[ 5.340309] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 5.340699] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 5.344102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.344105] libata version 3.00 loaded.
[ 5.344138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.344142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.344145] usb usb2: Product: EHCI Host Controller
[ 5.344148] usb usb2: Manufacturer: Linux 2.6.34.1-zgws1 ehci_hcd
[ 5.344150] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.344357] hub 2-0:1.0: USB hub found
[ 5.344364] hub 2-0:1.0: 8 ports detected
[ 5.344482] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.344490] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.344495] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.344535] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.344577] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 5.344615] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.344618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.344621] usb usb3: Product: UHCI Host Controller
[ 5.344623] usb usb3: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.344626] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.344720] hub 3-0:1.0: USB hub found
[ 5.344725] hub 3-0:1.0: 2 ports detected
[ 5.347870] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 5.348150] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 5.348161] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.348169] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.348174] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.348225] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.348262] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 5.348306] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.348309] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.348312] usb usb4: Product: UHCI Host Controller
[ 5.348314] usb usb4: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.348317] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.348420] hub 4-0:1.0: USB hub found
[ 5.348425] hub 4-0:1.0: 2 ports detected
[ 5.348500] ata_piix 0000:00:1f.1: version 2.13
[ 5.348510] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 5.348554] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.348648] scsi0 : ata_piix
[ 5.348747] scsi1 : ata_piix
[ 5.349523] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 5.349527] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 5.349577] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.349585] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.349589] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.349640] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.349669] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 5.349711] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.349714] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.349717] usb usb5: Product: UHCI Host Controller
[ 5.349720] usb usb5: Manufacturer: Linux 2.6.34.1-zgws1 uhci_hcd
[ 5.349723] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.349830] hub 5-0:1.0: USB hub found
[ 5.349836] hub 5-0:1.0: 2 ports detected
[ 5.350121] ata2: port disabled. ignoring.
[ 5.431411] ahci 0000:00:1f.2: version 3.0
[ 5.431430] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 5.431485] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 5.431560] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 5.431564] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.431570] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.431727] scsi2 : ahci
[ 5.431804] scsi3 : ahci
[ 5.431867] scsi4 : ahci
[ 5.431940] scsi5 : ahci
[ 5.432058] ata3: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 30
[ 5.432061] ata4: DUMMY
[ 5.432062] ata5: DUMMY
[ 5.432064] ata6: DUMMY
[ 5.457464] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:da:7d:6b
[ 5.457468] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.457606] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 5.512573] ata1.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33
[ 5.528495] ata1.00: configured for UDMA/33
[ 5.530345] scsi 0:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5
[ 5.657080] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 5.748096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.749280] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.749285] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.749289] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.750372] ata3.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
[ 5.750375] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.751707] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.751712] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.751716] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.752839] ata3.00: configured for UDMA/133
[ 5.770575] ata3.00: configured for UDMA/133
[ 5.770578] ata3: EH complete
[ 5.770658] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[ 5.779704] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.779774] sd 2:0:0:0: [sda] Write Protect is off
[ 5.779777] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.779806] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.779969] sda:
[ 5.790425] usb 2-5: New USB device found, idVendor=14cd, idProduct=121c
[ 5.790432] usb 2-5: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 5.790438] usb 2-5: Product: Mass Storage Device
[ 5.790443] usb 2-5: Manufacturer: Generic
[ 5.790448] usb 2-5: SerialNumber: 812320090519
[ 5.798461] Initializing USB Mass Storage driver...
[ 5.798567] scsi6 : usb-storage 2-5:1.0
[ 5.798660] usbcore: registered new interface driver usb-storage
[ 5.798663] USB Mass Storage support registered.
[ 5.900051] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 6.032419] usb 2-6: New USB device found, idVendor=04b3, idProduct=4485
[ 6.032422] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.032816] hub 2-6:1.0: USB hub found
[ 6.032905] hub 2-6:1.0: 4 ports detected
[ 6.116519] sda1
[ 6.116789] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.122759] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.122763] Uniform CD-ROM driver Revision: 3.20
[ 6.122859] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.127582] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.127624] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.333225] [drm] Initialized drm 1.1.0 20060810
[ 6.370123] [drm] radeon kernel modesetting enabled.
[ 6.370243] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 6.370290] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 6.370306] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.370325] radeon 0000:01:00.0: setting latency timer to 64
[ 6.372102] [drm] initializing kernel modesetting (RV515 0x1002:0x7145).
[ 6.381089] [drm] register mmio base: 0xEE100000
[ 6.381092] [drm] register mmio size: 65536
[ 6.381258] ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP
[ 6.381493] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 6.381506] [drm] 5 Power State(s)
[ 6.381509] [drm] State 0 Battery
[ 6.381511] [drm] 1 PCIE Lanes
[ 6.381512] [drm] 1 Clock Mode(s)
[ 6.381514] [drm] 0 engine/memory: 129000/135000
[ 6.381517] [drm] State 1 Battery
[ 6.381518] [drm] 1 PCIE Lanes
[ 6.381520] [drm] 1 Clock Mode(s)
[ 6.381522] [drm] 0 engine/memory: 210000/135000
[ 6.381525] [drm] State 2 Powersave
[ 6.381526] [drm] 1 PCIE Lanes
[ 6.381528] [drm] 1 Clock Mode(s)
[ 6.381530] [drm] 0 engine/memory: 324000/135000
[ 6.381533] [drm] State 3 Default
[ 6.381534] [drm] 16 PCIE Lanes
[ 6.381536] [drm] 1 Clock Mode(s)
[ 6.381538] [drm] 0 engine/memory: 342000/350000
[ 6.381540] [drm] State 4 Default (default)
[ 6.381542] [drm] 16 PCIE Lanes
[ 6.381544] [drm] 1 Clock Mode(s)
[ 6.381546] [drm] 0 engine/memory: 392000/350000
[ 6.381555] [drm] radeon: power management initialized
[ 6.381565] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.381575] radeon 0000:01:00.0: VRAM: 128M 0x00000000 - 0x07FFFFFF (128M used)
[ 6.381579] radeon 0000:01:00.0: GTT: 512M 0x08000000 - 0x27FFFFFF
[ 6.381765] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[ 6.381777] [drm] radeon: using MSI.
[ 6.381829] [drm] radeon: irq initialized.
[ 6.382609] [drm] Detected VRAM RAM=128M, BAR=128M
[ 6.382612] [drm] RAM width 128bits DDR
[ 6.382728] [TTM] Zone kernel: Available graphics memory: 439548 kiB.
[ 6.382731] [TTM] Zone highmem: Available graphics memory: 1557152 kiB.
[ 6.382749] [drm] radeon: 128M of VRAM memory ready
[ 6.382752] [drm] radeon: 512M of GTT memory ready.
[ 6.382773] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.385802] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[ 6.385838] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 6.387136] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 6.387162] [drm] radeon: cp idle (0x10000C03)
[ 6.387201] [drm] Loading R500 Microcode
[ 6.387205] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 6.390354] [drm] radeon: ring at 0x0000000008000000
[ 6.390413] [drm] ring test succeeded in 4 usecs
[ 6.390598] [drm] radeon: ib pool ready.
[ 6.390699] [drm] ib test succeeded in 0 usecs
[ 6.390728] [drm] Unknown TV standard; defaulting to NTSC
[ 6.390899] [drm] Radeon Display Connectors
[ 6.390901] [drm] Connector 0:
[ 6.390903] [drm] VGA
[ 6.390906] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.390908] [drm] Encoders:
[ 6.390910] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.390912] [drm] Connector 1:
[ 6.390914] [drm] LVDS
[ 6.390916] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 6.390919] [drm] Encoders:
[ 6.390921] [drm] LCD1: INTERNAL_LVTM1
[ 6.390923] [drm] Connector 2:
[ 6.390924] [drm] DVI-I
[ 6.390926] [drm] HPD1
[ 6.390929] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 6.390931] [drm] Encoders:
[ 6.390933] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 6.496045] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 6.663730] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 6.663734] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.663737] usb 5-1: Product: BCM2045B
[ 6.663740] usb 5-1: Manufacturer: Broadcom Corp
[ 6.664949] [drm] fb mappable at 0xD80C0000
[ 6.664952] [drm] vram apper at 0xD8000000
[ 6.664954] [drm] size 7680000
[ 6.664955] [drm] fb depth is 24
[ 6.664957] [drm] pitch is 6400
[ 6.720466] Console: switching to colour frame buffer device 175x65
[ 6.727852] fb0: radeondrmfb frame buffer device
[ 6.727855] registered panic notifier
[ 6.727860] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
[ 6.797816] scsi 6:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
[ 6.798745] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.799280] sd 6:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 6.799778] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.799782] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6.799785] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.803028] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.803093] sdb: sdb4
[ 6.806035] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.806104] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.908037] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 6.909069] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 7.080708] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 7.080712] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.080716] usb 5-2: Product: Biometric Coprocessor
[ 7.080718] usb 5-2: Manufacturer: STMicroelectronics
[ 7.156174] usb 2-6.2: new low speed USB device using ehci_hcd and address 6
[ 7.252631] usb 2-6.2: New USB device found, idVendor=1bcf, idProduct=0007
[ 7.252636] usb 2-6.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.252639] usb 2-6.2: Product: USB Optical Mouse
[ 7.261671] usbcore: registered new interface driver hiddev
[ 7.264938] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input5
[ 7.265271] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-6.2/input0
[ 7.265417] usbcore: registered new interface driver usbhid
[ 7.265420] usbhid: USB HID core driver
[ 7.615658] md: raid1 personality registered for level 1
[ 7.684070] raid6: int32x1 571 MB/s
[ 7.752038] raid6: int32x2 697 MB/s
[ 7.820149] raid6: int32x4 576 MB/s
[ 7.888098] raid6: int32x8 472 MB/s
[ 7.956028] raid6: mmxx1 1813 MB/s
[ 8.024031] raid6: mmxx2 2075 MB/s
[ 8.092034] raid6: sse1x1 1376 MB/s
[ 8.160034] raid6: sse1x2 1852 MB/s
[ 8.228010] raid6: sse2x1 2106 MB/s
[ 8.296030] raid6: sse2x2 2336 MB/s
[ 8.296033] raid6: using algorithm sse2x2 (2336 MB/s)
[ 8.297410] xor: automatically using best checksumming function: pIII_sse
[ 8.316009] pIII_sse : 4994.000 MB/sec
[ 8.316011] xor: using function: pIII_sse (4994.000 MB/sec)
[ 8.321750] md: raid6 personality registered for level 6
[ 8.321753] md: raid5 personality registered for level 5
[ 8.321755] md: raid4 personality registered for level 4
[ 10.474844] PM: Starting manual resume from disk
[ 10.490588] EXT3-fs (dm-12): recovery required on readonly filesystem
[ 10.490593] EXT3-fs (dm-12): write access will be enabled during recovery
[ 10.515959] EXT3-fs (dm-12): recovery complete
[ 10.515984] kjournald starting. Commit interval 5 seconds
[ 10.524577] EXT3-fs (dm-12): mounted filesystem with writeback data mode
[ 12.234536] udev: starting version 158
[ 12.603415] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 12.688053] Bluetooth: Core ver 2.15
[ 12.688298] NET: Registered protocol family 31
[ 12.688301] Bluetooth: HCI device and connection manager initialized
[ 12.688304] Bluetooth: HCI socket layer initialized
[ 12.712827] Non-volatile memory driver v1.3
[ 12.713683] intel_rng: FWH not detected
[ 12.714101] rtc_cmos 00:07: RTC can wake from S4
[ 12.714154] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 12.714191] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 12.838929] cfg80211: Calling CRDA to update world regulatory domain
[ 12.852309] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.852786] usbcore: registered new interface driver btusb
[ 12.868136] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 13.000907] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 13.000913] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 13.000922] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff]
[ 13.000926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff: excluding 0xa000-0xa0ff 0xa400-0xa4ff
[ 13.050121] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 13.050126] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
[ 13.050143] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 13.050146] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
[ 13.050165] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
[ 13.050169] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0xcf7: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 0x800-0x80f
[ 13.056877] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
[ 13.056881] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd00-0xffff: excluding 0x1000-0x107f 0x1180-0x11bf 0x15e0-0x15ef 0x1600-0x1607 0x1610-0x161f 0x1648-0x165f 0x1680-0x169f 0x1800-0x188f 0x18a8-0x18cf 0x18e0-0x18ff 0x2000-0xa0ff 0xa400-0xa4ff
[ 13.107526] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
[ 13.107531] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding 0xa0000-0xbffff
[ 13.107546] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
[ 13.107550] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
[ 13.107555] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
[ 13.107559] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
[ 13.107564] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xfebfffff]
[ 13.107568] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xfebfffff: excluding 0xc0000000-0xc07fffff 0xc4000000-0xc7ffffff 0xd8000000-0xe47fffff 0xe8000000-0xee7fffff 0xf0000000-0xf3ffffff 0xfe800000-0xfeffffff
[ 13.107687] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xfed40000-0xfed40fff]
[ 13.107690] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfed40000-0xfed40fff: excluding 0xfed40000-0xfed41fff
[ 13.126470] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 13.126473] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 13.126476] thinkpad_acpi: ThinkPad BIOS 79ETE6WW (2.26 ), EC 79HT50WW-1.07
[ 13.126478] thinkpad_acpi: Lenovo ThinkPad T60, model 2007VC8
[ 13.127070] thinkpad_acpi: radio switch found; radios are enabled
[ 13.127182] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 13.127185] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 13.134783] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 13.135263] Registered led device: tpacpi::thinklight
[ 13.135504] Registered led device: tpacpi::power
[ 13.135525] Registered led device: tpacpi::standby
[ 13.135541] Registered led device: tpacpi::thinkvantage
[ 13.138101] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 13.138192] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 13.140903] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 13.352454] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 13.352459] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.394122] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 13.452301] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 13.452305] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 13.452439] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.452454] iwl3945 0000:03:00.0: setting latency timer to 64
[ 13.460945] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7
[ 13.465882] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
[ 13.467416] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 13.469061] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 13.469129] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 13.469194] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 13.469264] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 13.508754] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 13.508758] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 13.508903] iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
[ 13.590288] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.689824] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.689829] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 13.689898] HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
[ 13.689935] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.771713] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 14.272085] EXT3-fs (dm-12): using internal journal
[ 18.863934] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 19.096023] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 20.805639] usb 2-5: USB disconnect, address 2
[ 22.247194] Adding 3145208k swap on /dev/mapper/swap0. Priority:-1 extents:1 across:3145208k
[ 33.161570] kjournald starting. Commit interval 5 seconds
[ 33.178321] EXT3-fs (dm-14): using internal journal
[ 33.178327] EXT3-fs (dm-14): mounted filesystem with writeback data mode
[ 33.209284] kjournald starting. Commit interval 5 seconds
[ 33.236197] EXT3-fs (dm-17): using internal journal
[ 33.236204] EXT3-fs (dm-17): mounted filesystem with writeback data mode
[ 33.328798] kjournald starting. Commit interval 5 seconds
[ 33.329055] EXT3-fs (dm-15): using internal journal
[ 33.329060] EXT3-fs (dm-15): mounted filesystem with writeback data mode
[ 33.381481] kjournald starting. Commit interval 5 seconds
[ 33.381722] EXT3-fs (dm-16): using internal journal
[ 33.381726] EXT3-fs (dm-16): mounted filesystem with writeback data mode
[ 33.455836] kjournald starting. Commit interval 5 seconds
[ 33.456067] EXT3-fs (dm-18): using internal journal
[ 33.456071] EXT3-fs (dm-18): mounted filesystem with writeback data mode
[ 33.488303] kjournald starting. Commit interval 5 seconds
[ 33.488541] EXT3-fs (dm-20): using internal journal
[ 33.488546] EXT3-fs (dm-20): mounted filesystem with writeback data mode
[ 33.532337] kjournald starting. Commit interval 5 seconds
[ 33.532595] EXT3-fs (dm-19): using internal journal
[ 33.532600] EXT3-fs (dm-19): mounted filesystem with writeback data mode
[ 37.140935] NET: Registered protocol family 10
[ 37.141485] lo: Disabled Privacy Extensions
[ 37.448469] Bridge firewalling registered
[ 38.784920] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 38.784924] All bugs added by David S. Miller <davem@redhat.com>
[ 39.849498] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 39.904216] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 39.904760] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.191010] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 40.238930] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 40.325080] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.822705] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 41.822709] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 41.822986] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 42.017500] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 42.017504] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 42.017506] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 42.017508] vboxdrv: the usage of hardware performance counters by
[ 42.017509] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 42.017514] vboxdrv: Found 2 processor cores.
[ 42.017598] vboxdrv: fAsync=1 offMin=0x8a9e4 offMax=0x8a9e4
[ 42.017661] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 42.017663] vboxdrv: Successfully loaded version 3.2.6_OSE (interface 0x00140001).
[ 44.069208] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.123908] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 44.124123] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 44.124126] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 44.124128] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 46.810862] Bluetooth: L2CAP ver 2.14
[ 46.810865] Bluetooth: L2CAP socket layer initialized
[ 47.187334] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.187338] Bluetooth: BNEP filters: protocol multicast
[ 47.207756] Bluetooth: SCO (Voice Link) ver 0.6
[ 47.207759] Bluetooth: SCO socket layer initialized
[ 47.552041] br0: no IPv6 routers present
[ 47.668350] Bluetooth: RFCOMM TTY layer initialized
[ 47.668356] Bluetooth: RFCOMM socket layer initialized
[ 47.668359] Bluetooth: RFCOMM ver 1.11
[ 49.332627] lp: driver loaded but no devices found
[ 49.552630] ppdev: user-space parallel port driver
[ 51.984045] eth0: no IPv6 routers present
[ 52.433070] device eth0 entered promiscuous mode
[ 68.095028] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 83.852628] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 84.117958] device eth0 left promiscuous mode
[ 84.137558] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 84.192247] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 84.192961] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 84.414159] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 86.818732] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 86.818739] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 86.819230] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 89.373315] wlan0: authenticate with 00:24:fe:01:97:12 (try 1)
[ 89.378150] wlan0: authenticated
[ 89.378747] wlan0: associate with 00:24:fe:01:97:12 (try 1)
[ 89.381931] wlan0: RX AssocResp from 00:24:fe:01:97:12 (capab=0x431 status=0 aid=3)
[ 89.381938] wlan0: associated
[ 89.383699] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 97.496054] eth0: no IPv6 routers present
[ 100.108053] wlan0: no IPv6 routers present
[ 365.914822] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 365.916906] input: Logitech Elite Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:11/input10
[ 365.917244] generic-bluetooth 0005:046D:B301.0002: input,hidraw1: BLUETOOTH HID v23.02 Keyboard [Logitech Elite Keyboard] on 00:16:CF:E2:32:E8
[ 428.014455] input: Logitech MX900 Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/bluetooth/hci0/hci0:12/input11
[ 428.014650] generic-bluetooth 0005:046D:B001.0003: input,hidraw2: BLUETOOTH HID v22.00 Mouse [Logitech MX900 Mouse] on 00:16:CF:E2:32:E8
[ 481.548066] wlan0: deauthenticating from 00:24:fe:01:97:12 by local choice (reason=3)
[ 481.596063] cfg80211: Calling CRDA to update world regulatory domain
[ 481.693087] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 482.016409] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.074538] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.075276] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 482.272438] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.332208] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 482.332878] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 484.382698] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 484.382703] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 484.382982] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 495.340033] eth0: no IPv6 routers present
[ 670.979820] tun: Universal TUN/TAP device driver, 1.6
[ 670.979827] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 670.980928] tun0: Disabled Privacy Extensions
^ permalink raw reply
* [PATCH 9/9] sunrpc: auth_gss: misused copy_to_user() return value
From: Kulikov Vasiliy @ 2010-07-30 11:10 UTC (permalink / raw)
To: kernel-janitors
Cc: Trond Myklebust, J. Bruce Fields, Neil Brown, David S. Miller,
Jeff Layton, Steve Dickson, Suresh Jayaraman, Kevin Coffman,
linux-nfs, netdev
copy_to_user() returns nonzero value on error, this value may be any
value between 0 and requested count, not only requested count.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
---
net/sunrpc/auth_gss/auth_gss.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 8da2a0e..232d7dc 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -610,7 +610,7 @@ gss_pipe_upcall(struct file *filp, struct rpc_pipe_msg *msg,
unsigned long left;
left = copy_to_user(dst, data, mlen);
- if (left == mlen) {
+ if (left)
msg->errno = -EFAULT;
return -EFAULT;
}
--
1.7.0.4
^ permalink raw reply related
* Re: [PATCH] act_nat: the checksum of ICMP doesn't have pseudo header
From: Herbert Xu @ 2010-07-30 10:24 UTC (permalink / raw)
To: Changli Gao; +Cc: Jamal Hadi Salim, David S. Miller, netdev, linux-kernel
In-Reply-To: <AANLkTi=YHvra6DuL7vX=DfQmR6bsw7rNMJ9mRhUzHvj2@mail.gmail.com>
On Fri, Jul 30, 2010 at 06:10:19PM +0800, Changli Gao wrote:
>
> Is it really necessary, and I have noticed that netfilter doesn't call
> inet_proto_csum_replace4 in this way.
The checksum update is for the inner IP header. netfilter does
of course update the checksum, it just doesn't do it here which is
for the outer IP header.
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* Re: [PATCH] act_nat: the checksum of ICMP doesn't have pseudo header
From: Changli Gao @ 2010-07-30 10:10 UTC (permalink / raw)
To: Herbert Xu; +Cc: Jamal Hadi Salim, David S. Miller, netdev, linux-kernel
In-Reply-To: <20100730090922.GA7807@gondor.apana.org.au>
On Fri, Jul 30, 2010 at 5:09 PM, Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Fri, Jul 30, 2010 at 08:04:18AM +0800, Changli Gao wrote:
>> after updating the value of the ICMP payload, inet_proto_csum_replace4() should
>> be called with zero pseudohdr.
>>
>> Signed-off-by: Changli Gao <xiaosuo@gmail.com>
>
> No, the code is correct as is. We need to update the checksum
> even if the checksum is partial, which is what the 1 is for.
>
Is it really necessary, and I have noticed that netfilter doesn't call
inet_proto_csum_replace4 in this way.
static bool
icmp_manip_pkt(struct sk_buff *skb,
unsigned int iphdroff,
const struct nf_conntrack_tuple *tuple,
enum nf_nat_manip_type maniptype)
{
const struct iphdr *iph = (struct iphdr *)(skb->data + iphdroff);
struct icmphdr *hdr;
unsigned int hdroff = iphdroff + iph->ihl*4;
if (!skb_make_writable(skb, hdroff + sizeof(*hdr)))
return false;
hdr = (struct icmphdr *)(skb->data + hdroff);
inet_proto_csum_replace2(&hdr->checksum, skb,
hdr->un.echo.id, tuple->src.u.icmp.id, 0);
hdr->un.echo.id = tuple->src.u.icmp.id;
return true;
}
Thanks.
--
Regards,
Changli Gao(xiaosuo@gmail.com)
^ permalink raw reply
* [PATCH] can-raw: Fix skb_orphan_try handling
From: Oliver Hartkopp @ 2010-07-30 9:44 UTC (permalink / raw)
To: Eric Dumazet; +Cc: SocketCAN Core Mailing List, Linux Netdev List, Patrick Ohly
Hello Eric, hello Patrick,
Commit fc6055a5ba31e2c14e36e8939f9bf2b6d586a7f5 (net: Introduce
skb_orphan_try()) allows an early orphan of the skb and takes care on
tx timestamping, which needs the sk-reference in the skb on driver level.
So does the can-raw socket, which has not been taken into account here.
The patch below adds a 'prevent_sk_orphan' bit in the skb tx shared info,
which fixes the problem discovered by Matthias Fuchs here:
http://marc.info/?t=128030411900003&r=1&w=2
Even if it's not a primary tx timestamp topic it fits well into some skb
shared tx context. Or should be find a different place for the information to
protect the sk reference until it reaches the driver level?
Regards,
Oliver
This patch applies on net-2.6 and would be a candidate for stable 2.6.34 also.
Signed-off-by: Oliver Hartkopp <socketcan-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>
---
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index f89e7fd..eb674b7 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -169,6 +169,7 @@ struct skb_shared_hwtstamps {
* @software: generate software time stamp
* @in_progress: device driver is going to provide
* hardware time stamp
+ * @prevent_sk_orphan: make sk reference available on driver level
* @flags: all shared_tx flags
*
* These flags are attached to packets as part of the
@@ -178,7 +179,8 @@ union skb_shared_tx {
struct {
__u8 hardware:1,
software:1,
- in_progress:1;
+ in_progress:1,
+ prevent_sk_orphan:1;
};
__u8 flags;
};
diff --git a/net/can/raw.c b/net/can/raw.c
index da99cf1..eedab37 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -655,6 +655,10 @@ static int raw_sendmsg(struct kiocb *iocb, struct socket *sock,
err = sock_tx_timestamp(msg, sk, skb_tx(skb));
if (err < 0)
goto free_skb;
+
+ /* to be able to check the received tx sock reference in raw_rcv() */
+ (skb_tx(skb))->prevent_sk_orphan = 1;
+
skb->dev = dev;
skb->sk = sk;
^ permalink raw reply related
* Re: [PATCH] act_nat: the checksum of ICMP doesn't have pseudo header
From: Herbert Xu @ 2010-07-30 9:09 UTC (permalink / raw)
To: Changli Gao; +Cc: Jamal Hadi Salim, David S. Miller, netdev, linux-kernel
In-Reply-To: <1280448258-1893-1-git-send-email-xiaosuo@gmail.com>
On Fri, Jul 30, 2010 at 08:04:18AM +0800, Changli Gao wrote:
> after updating the value of the ICMP payload, inet_proto_csum_replace4() should
> be called with zero pseudohdr.
>
> Signed-off-by: Changli Gao <xiaosuo@gmail.com>
No, the code is correct as is. We need to update the checksum
even if the checksum is partial, which is what the 1 is for.
Cheers,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
* [patch] hp100: unmap memory on error path
From: Dan Carpenter @ 2010-07-30 9:06 UTC (permalink / raw)
To: Jaroslav Kysela
Cc: David S. Miller, Jiri Pirko, Stephen Hemminger, netdev,
kernel-janitors
There was an error path where "mem_ptr_virt" didn't get unmapped.
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index acbf0d0..ce587f4 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -720,9 +720,10 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
/* Conversion to new PCI API :
* Pages are always aligned and zeroed, no need to it ourself.
* Doc says should be OK for EISA bus as well - Jean II */
- if ((lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr)) == NULL) {
+ lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr);
+ if (!lp->page_vaddr_algn) {
err = -ENOMEM;
- goto out2;
+ goto out_mem_ptr;
}
lp->whatever_offset = ((u_long) page_baddr) - ((u_long) lp->page_vaddr_algn);
@@ -798,6 +799,7 @@ out3:
pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
lp->page_vaddr_algn,
virt_to_whatever(dev, lp->page_vaddr_algn));
+out_mem_ptr:
if (mem_ptr_virt)
iounmap(mem_ptr_virt);
out2:
^ permalink raw reply related
* RE: [RFC PATCH v8 00/16] Provide a zero-copy method on KVM virtio-net.
From: Xin, Xiaohui @ 2010-07-30 8:53 UTC (permalink / raw)
To: Shirley Ma
Cc: netdev@vger.kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, mst@redhat.com, mingo@elte.hu,
davem@davemloft.net, herbert@gondor.apana.org.au,
jdike@linux.intel.com
In-Reply-To: <1280442682.9058.15.camel@localhost.localdomain>
>Hello Xiaohui,
>
>On Thu, 2010-07-29 at 19:14 +0800, xiaohui.xin@intel.com wrote:
>> The idea is simple, just to pin the guest VM user space and then
>> let host NIC driver has the chance to directly DMA to it.
>> The patches are based on vhost-net backend driver. We add a device
>> which provides proto_ops as sendmsg/recvmsg to vhost-net to
>> send/recv directly to/from the NIC driver. KVM guest who use the
>> vhost-net backend may bind any ethX interface in the host side to
>> get copyless data transfer thru guest virtio-net frontend.
>
>Since vhost-net already supports macvtap/tun backends, do you think
>whether it's better to implement zero copy in macvtap/tun than inducing
>a new media passthrough device here?
>
I'm not sure if there will be more duplicated code in the kernel.
>> Our goal is to improve the bandwidth and reduce the CPU usage.
>> Exact performance data will be provided later.
>
>I did some vhost performance measurement over 10Gb ixgbe, and found that
>in order to get consistent BW results, netperf/netserver, qemu, vhost
>threads smp affinities are required.
>
>Looking forward to these results for small message size comparison. For
>large message size 10Gb ixgbe BW already reached by doing vhost smp
>affinity w/i offloading support, we will see how much CPU utilization it
>can be reduced.
>
>Please provide latency results as well. I did some experimental on
>macvtap zero copy sendmsg, what I have found that get_user_pages latency
>pretty high.
>
Ok, I will try that.
>Thanks
>Shirley
>
>
>
^ permalink raw reply
* Re: [PATCH] act_nat: fix wild pointer
From: Herbert Xu @ 2010-07-30 7:18 UTC (permalink / raw)
To: Changli Gao; +Cc: Jamal Hadi Salim, David S. Miller, netdev
In-Reply-To: <1280446906-29032-1-git-send-email-xiaosuo@gmail.com>
On Fri, Jul 30, 2010 at 07:41:46AM +0800, Changli Gao wrote:
> pskb_may_pull() may change skb pointers, so adjust icmph after pskb_may_pull().
>
> Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox