* linux-next: manual merge of the net tree with the net-current tree
From: Stephen Rothwell @ 2010-08-02 1:04 UTC (permalink / raw)
To: David Miller, netdev; +Cc: linux-next, linux-kernel, Herbert Xu
Hi all,
Today's linux-next merge of the net tree got a conflict in
net/bridge/br_device.c between commit
6d1d1d398cb7db7a12c5d652d50f85355345234f ("bridge: Fix skb leak when
multicast parsing fails on TX") from the net-current tree and commit
91d2c34a4eed32876ca333b0ca44f3bc56645805 ("bridge: Fix netpoll support")
from the net tree.
Just context changes. I fixed it up (see below) and can carry the fix for
a while.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc net/bridge/br_device.c
index f49bcd9,075c435..0000000
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@@ -46,12 -48,13 +48,16 @@@ netdev_tx_t br_dev_xmit(struct sk_buff
skb_reset_mac_header(skb);
skb_pull(skb, ETH_HLEN);
+ rcu_read_lock();
if (is_multicast_ether_addr(dest)) {
+ if (unlikely(netpoll_tx_running(dev))) {
+ br_flood_deliver(br, skb);
+ goto out;
+ }
- if (br_multicast_rcv(br, NULL, skb))
+ if (br_multicast_rcv(br, NULL, skb)) {
+ kfree_skb(skb);
goto out;
+ }
mdst = br_mdb_get(br, skb);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb))
^ permalink raw reply
* Re: 2.6.35-rc6-git6: Reported regressions from 2.6.34
From: Rafael J. Wysocki @ 2010-08-01 21:37 UTC (permalink / raw)
To: Linus Torvalds
Cc: Jens Axboe, Tejun Heo, Linux Kernel Mailing List, Maciej Rutecki,
Andrew Morton, Kernel Testers List, Network Development,
Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
DRI
In-Reply-To: <AANLkTimcH7+Bq1UEbaSU7SQpzArPgmSLegiqE13V8=CF-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Sunday, August 01, 2010, Linus Torvalds wrote:
> On Sun, Aug 1, 2010 at 6:46 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
...
>
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16369
> > Subject : Yet another 2.6.35 regression (AGP)?
> > Submitter : Woody Suwalski <terraluna977-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Date : 2010-07-09 14:21 (24 days old)
> > Message-ID : <4C373084.8000503-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > References : http://marc.info/?l=linux-kernel&m=127868797119254&w=2
>
> Should hopefully be fixed by commit e7b96f28c58c ("agp/intel: Use the
> correct mask to detect i830 aperture size.")
Closed.
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16365
> > Subject : kernel BUG at fs/btrfs/extent-tree.c:1353
> > Submitter : Johannes Hirte <johannes.hirte-3kN+8DYepx7zMJDuovMtMLNAH6kLmebB@public.gmane.org>
> > Date : 2010-07-08 14:27 (25 days old)
> > Message-ID : <201007081627.24654.johannes.hirte-3kN+8DYepx7zMJDuovMtMLNAH6kLmebB@public.gmane.org>
> > References : http://marc.info/?l=linux-kernel&m=127859960725931&w=2
>
> This one is reportedly fixed by commit 83ba7b071f30 ("writeback:
> simplify the write back thread queue")
Closed.
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16215
> > Subject : sysfs: cannot create duplicate filename '/class/net/bnep0'
> > Submitter : Janusz Krzysztofik <jkrzyszt-NCk8gXQAEuFz6jiHbVrK7g@public.gmane.org>
> > Date : 2010-06-15 14:55 (48 days old)
> > Handled-By : Eric W. Biederman <ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org>
>
> Fixed by commit 24b1442d01ae155ea716dfb94ed21605541c317d.
Closed.
Thanks,
Rafael
^ permalink raw reply
* Re: 2.6.35-rc6-git6: Reported regressions from 2.6.34
From: Larry Finger @ 2010-08-01 19:39 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
Linus Torvalds, Kernel Testers List, Network Development,
Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
DRI
In-Reply-To: <2dWFdr9kTFM.A.P0D.spXVMB@chimera>
On 08/01/2010 08:46 AM, Rafael J. Wysocki wrote:
> This message contains a list of some regressions from 2.6.34,
> for which there are no fixes in the mainline known to the tracking team.
> If any of them have been fixed already, please let us know.
>
> If you know of any other unresolved regressions from 2.6.34, please let us
> know either and we'll add them to the list. Also, please let us know
> if any of the entries below are invalid.
>
> Each entry from the list will be sent additionally in an automatic reply
> to this message with CCs to the people involved in reporting and handling
> the issue.
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16312
> Subject : WARNING: at fs/fs-writeback.c:1127 __mark_inode_dirty
> Submitter : Zdenek Kabelac <zdenek.kabelac-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date : 2010-06-28 9:40 (35 days old)
> Message-ID : <AANLkTin24fr5O4_q5Xbo9Y_NKkEmtcp6Hgmr9_4qXaFz-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
> References : http://marc.info/?l=linux-kernel&m=127771804806465&w=2
> Handled-By : Jan Kara <jack-AlSwsSmVLrQ@public.gmane.org>
> Patch : https://bugzilla.kernel.org/attachment.cgi?id=27272
I am beginning to think that Bug 16312 is not the same as Bug 16122. Even with
the patches from 16312, I still get warnings as below:
[ 11.728776] ------------[ cut here ]------------
[ 11.728787] WARNING: at fs/fs-writeback.c:964 __mark_inode_dirty+0x10f/0x1a0()
[ 11.728790] Hardware name: HP Pavilion dv2700 Notebook PC
[ 11.728792] Modules linked in: loop(+) dm_mod ide_cd_mod cdrom
snd_hda_codec_conexant ide_pci_generic arc4 ecb b43 rng_core mac80211
snd_hda_intel r8712u(C) cfg80211 snd_hda_codec amd74xx snd_pcm sg ide_core
rfkill led_class snd_timer ssb mmc_core pcmcia snd joydev k8temp hwmon
i2c_nforce2 pcmcia_core forcedeth serio_raw snd_page_alloc i2c_core battery ac
button ext4 mbcache jbd2 crc16 ohci_hcd sd_mod ehci_hcd usbcore fan processor
ahci libahci libata scsi_mod thermal
[ 11.728854] Pid: 2449, comm: udisks-part-id Tainted: G C
2.6.35-rc6-realtek+ #15
[ 11.728857] Call Trace:
[ 11.728865] [<ffffffff8104608a>] warn_slowpath_common+0x7a/0xb0
[ 11.728869] [<ffffffff810460d5>] warn_slowpath_null+0x15/0x20
[ 11.728874] [<ffffffff81129d5f>] __mark_inode_dirty+0x10f/0x1a0
[ 11.728879] [<ffffffff8111e07d>] touch_atime+0x12d/0x170
[ 11.728885] [<ffffffff810cab91>] generic_file_aio_read+0x5c1/0x720
[ 11.728890] [<ffffffff81107ca2>] do_sync_read+0xd2/0x110
[ 11.728896] [<ffffffff81077e7d>] ? trace_hardirqs_on+0xd/0x10
[ 11.728900] [<ffffffff811083c3>] vfs_read+0xb3/0x170
[ 11.728906] [<ffffffff81002d1c>] ? sysret_check+0x27/0x62
[ 11.728909] [<ffffffff811084cc>] sys_read+0x4c/0x80
[ 11.728914] [<ffffffff81002ceb>] system_call_fastpath+0x16/0x1b
[ 11.728917] ---[ end trace 32e16cacad33229f ]---
[ 11.728919] bdi-block not registered
The warnings do not occur with every boot and appear to be some kind of race
condition.
Larry
^ permalink raw reply
* [PATCH] nf_nat_core: don't check if the tuple is used if there is no other choice
From: Changli Gao @ 2010-08-01 19:38 UTC (permalink / raw)
To: Patrick McHardy; +Cc: David S. Miller, netfilter-devel, netdev, Changli Gao
Eliminate nf_nat_used_tuple() to save some CPU cycles when there is no other
choice.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/ipv4/netfilter/nf_nat_core.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 037a3a6..c370b21 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -262,11 +262,17 @@ get_unique_tuple(struct nf_conntrack_tuple *tuple,
proto = __nf_nat_proto_find(orig_tuple->dst.protonum);
/* Only bother mapping if it's not already in range and unique */
- if (!(range->flags & IP_NAT_RANGE_PROTO_RANDOM) &&
- (!(range->flags & IP_NAT_RANGE_PROTO_SPECIFIED) ||
- proto->in_range(tuple, maniptype, &range->min, &range->max)) &&
- !nf_nat_used_tuple(tuple, ct))
- goto out;
+ if (!(range->flags & IP_NAT_RANGE_PROTO_RANDOM)) {
+ if (range->flags & IP_NAT_RANGE_PROTO_SPECIFIED) {
+ if (proto->in_range(tuple, maniptype, &range->min,
+ &range->max) &&
+ (range->min.all == range->max.all ||
+ !nf_nat_used_tuple(tuple, ct)))
+ goto out;
+ } else if (!nf_nat_used_tuple(tuple, ct)) {
+ goto out;
+ }
+ }
/* Last change: get protocol to try to obtain unique tuple. */
proto->unique_tuple(tuple, range, maniptype, ct);
^ permalink raw reply related
* Re: e1000e crashes with 2.6.34.x and ThinkPad T60
From: Marc Haber @ 2010-08-01 19:14 UTC (permalink / raw)
To: Allan, Bruce W
Cc: Linux Kernel Developers, Linux Kernel Network Developers,
e1000-devel@lists.sourceforge.net
In-Reply-To: <8DD2590731AB5D4C9DBF71A877482A9001649C4653@orsmsx509.amr.corp.intel.com>
On Fri, Jul 30, 2010 at 10:42:03AM -0700, Allan, Bruce W wrote:
> Please also provide an eeprom dump from the wired LOM via 'ethtool -e ethX'.
Offset Values
------ ------
0x0000 00 16 41 aa be 37 30 0b b2 ff 51 00 ff ff ff ff
0x0010 53 00 03 01 6b 02 01 20 aa 17 9a 10 86 80 df 80
0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27
0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f
0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff
0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00
0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff
0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 7a a7
Greetings
Marc
--
-----------------------------------------------------------------------------
Marc Haber | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany | lose things." Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature | How to make an American Quilt | Fax: *49 3221 2323190
^ permalink raw reply
* Re: [PATCH 04/11] pcmcia: do not use io_req_t after call to pcmcia_request_io()
From: Marcel Holtmann @ 2010-08-01 18:04 UTC (permalink / raw)
To: Dominik Brodowski
Cc: linux-pcmcia-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, laforge-TgoAw6mPHtdg9hUCZPvPmw,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
linux-serial-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1280667550-3040-4-git-send-email-linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
Hi Dominik,
> After pcmcia_request_io(), do not make use of the values stored in
> io_req_t, but instead use those found in struct pcmcia_device->resource[].
>
> CC: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> CC: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> CC: linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> CC: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> CC: laforge-TgoAw6mPHtdg9hUCZPvPmw@public.gmane.org
> CC: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> CC: linux-bluetooth-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> CC: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
> CC: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
for the drivers/bluetooth/ pieces.
Acked-by: Marcel Holtmann <marcel-kz+m5ild9QBg9hUCZPvPmw@public.gmane.org>
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 05/11] pcmcia: do not use io_req_t when calling pcmcia_request_io()
From: Marcel Holtmann @ 2010-08-01 18:04 UTC (permalink / raw)
To: Dominik Brodowski
Cc: linux-pcmcia, netdev, linux-wireless, linux-ide, linux-usb,
laforge, linux-mtd, linux-bluetooth, alsa-devel, linux-serial,
Michael Buesch
In-Reply-To: <1280667550-3040-5-git-send-email-linux@dominikbrodowski.net>
Hi Dominik,
> Instead of io_req_t, drivers are now requested to fill out
> struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
> ranges. After a call to pcmcia_request_io(), the ports found there
> are reserved, after calling pcmcia_request_configuration(), they may
> be used.
>
> CC: netdev@vger.kernel.org
> CC: linux-wireless@vger.kernel.org
> CC: linux-ide@vger.kernel.org
> CC: linux-usb@vger.kernel.org
> CC: laforge@gnumonks.org
> CC: linux-mtd@lists.infradead.org
> CC: linux-bluetooth@vger.kernel.org
> CC: alsa-devel@alsa-project.org
> CC: linux-serial@vger.kernel.org
> CC: Michael Buesch <mb@bu3sch.de>
> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
for the drivers/bluetooth/ pieces.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Regards
Marcel
^ permalink raw reply
* Re: 2.6.35-rc6-git6: Reported regressions from 2.6.34
From: Linus Torvalds @ 2010-08-01 18:01 UTC (permalink / raw)
To: Rafael J. Wysocki, Jens Axboe, Tejun Heo
Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
Kernel Testers List, Network Development, Linux ACPI,
Linux PM List, Linux SCSI List, Linux Wireless List, DRI
In-Reply-To: <2dWFdr9kTFM.A.P0D.spXVMB@chimera>
On Sun, Aug 1, 2010 at 6:46 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16400
> Subject : 2.6.35-rc5 inconsistent lock state
> Submitter : Martin Pirker <lkml.collector-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date : 2010-07-14 20:33 (19 days old)
> Message-ID : <AANLkTikDF0TL6OyPVCzPlUTwxFehcrETn3ysgSSeTq92@mail.gmail.com>
> References : http://marc.info/?l=linux-kernel&m=127913961025267&w=2
This has a proposed patch. I don't know what the status of it is, though. Jens?
http://marc.info/?l=linux-kernel&m=127950018204029&w=2
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16393
> Subject : kernel BUG at fs/block_dev.c:765!
> Submitter : Markus Trippelsdorf <markus-xp2qqqlHh3xzoYq+O6RWwA@public.gmane.org>
> Date : 2010-07-14 13:52 (19 days old)
> Message-ID : <20100714135217.GA1797-joY5NpejW+Hx3b7vapvTcQ@public.gmane.org>
> References : http://marc.info/?l=linux-kernel&m=127911564213748&w=2
This one is interesting. And I think I perhaps see where it's coming from.
bd_start_claiming() (through bd_prepare_to_claim()) has two separate
success cases: either there was no holder (bd_claiming is NULL) or the
new holder was already claiming it (bd_claiming == holder).
Note in particular the case of the holder _already_ holding it. What happens is:
- bd_start_claiming() succeeds because we had _already_ claimed it
with the same holder
- then some error happens, and we call bd_abort_claiming(), which
does whole->bd_claiming = NULL;
- the original holder thinks it still holds the bd, but it has been released!
- a new claimer comes in, and succeeds because bd_claiming is now NULL.
- we now have two "owners" of the bd, but bd_claiming only points to
the second one.
I think bd_start_claiming() needs to do some kind of refcount for the
nested holder case, and bd_abort_claiming() needs to decrement the
refcount and only clear the bd_claiming field when it goes down to
zero.
I dunno. Maybe there's something else going on, but it does look
suspicious, and the above would explain the BUG_ON().
Tejun, Jens?
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16369
> Subject : Yet another 2.6.35 regression (AGP)?
> Submitter : Woody Suwalski <terraluna977-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date : 2010-07-09 14:21 (24 days old)
> Message-ID : <4C373084.8000503-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> References : http://marc.info/?l=linux-kernel&m=127868797119254&w=2
Should hopefully be fixed by commit e7b96f28c58c ("agp/intel: Use the
correct mask to detect i830 aperture size.")
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16365
> Subject : kernel BUG at fs/btrfs/extent-tree.c:1353
> Submitter : Johannes Hirte <johannes.hirte-3kN+8DYepx7zMJDuovMtMLNAH6kLmebB@public.gmane.org>
> Date : 2010-07-08 14:27 (25 days old)
> Message-ID : <201007081627.24654.johannes.hirte-3kN+8DYepx7zMJDuovMtMA@public.gmane.orge>
> References : http://marc.info/?l=linux-kernel&m=127859960725931&w=2
This one is reportedly fixed by commit 83ba7b071f30 ("writeback:
simplify the write back thread queue")
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16215
> Subject : sysfs: cannot create duplicate filename '/class/net/bnep0'
> Submitter : Janusz Krzysztofik <jkrzyszt-NCk8gXQAEuFz6jiHbVrK7g@public.gmane.org>
> Date : 2010-06-15 14:55 (48 days old)
> Handled-By : Eric W. Biederman <ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org>
Fixed by commit 24b1442d01ae155ea716dfb94ed21605541c317d.
Linus
^ permalink raw reply
* [PATCH v2] nf_nat: no IP_NAT_RANGE_MAP_IPS flags when alloc_null_binding()
From: Changli Gao @ 2010-08-01 14:45 UTC (permalink / raw)
To: Patrick McHardy; +Cc: David S. Miller, netfilter-devel, netdev, Changli Gao
when alloc_null_binding(), no IP_NAT_RNAGE_MAP_IPS in flags means no IP address
translation is needed. It isn't necessary to specify the address explicitly.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/ipv4/netfilter/nf_nat_rule.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index ebbd319..21c3042 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -106,16 +106,15 @@ alloc_null_binding(struct nf_conn *ct, unsigned int hooknum)
{
/* Force range to this IP; let proto decide mapping for
per-proto parts (hence not IP_NAT_RANGE_PROTO_SPECIFIED).
- Use reply in case it's already been mangled (eg local packet).
*/
- __be32 ip
- = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC
- ? ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip
- : ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip);
- struct nf_nat_range range
- = { IP_NAT_RANGE_MAP_IPS, ip, ip, { 0 }, { 0 } };
-
- pr_debug("Allocating NULL binding for %p (%pI4)\n", ct, &ip);
+ struct nf_nat_range range;
+
+ range.flags = 0;
+ pr_debug("Allocating NULL binding for %p (%pI4)\n", ct,
+ HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC ?
+ &ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip :
+ &ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip);
+
return nf_nat_setup_info(ct, &range, HOOK2MANIP(hooknum));
}
^ permalink raw reply related
* 2.6.35-rc6-git6: Reported regressions 2.6.33 -> 2.6.34
From: Rafael J. Wysocki @ 2010-08-01 14:27 UTC (permalink / raw)
To: Linux Kernel Mailing List
Cc: Maciej Rutecki, Andrew Morton, Linus Torvalds,
Kernel Testers List, Network Development, Linux ACPI,
Linux PM List, Linux SCSI List, Linux Wireless List, DRI
[NOTE: This is the last summary report of regressions introduced between
2.6.33 and 2.6.34. Thanks for helping us with tracking these bugs!]
This message contains a list of some post-2.6.33 regressions introduced before
2.6.34, for which there are no fixes in the mainline known to the tracking team.
If any of them have been fixed already, please let us know.
If you know of any other unresolved post-2.6.33 regressions, please let us know
either and we'll add them to the list. Also, please let us know if any
of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.
Listed regressions statistics:
Date Total Pending Unresolved
----------------------------------------
2010-08-01 129 17 16
2010-07-23 128 27 25
2010-07-10 122 25 24
2010-06-21 114 36 28
2010-06-13 111 40 34
2010-05-09 80 27 24
2010-05-04 76 26 22
2010-04-20 64 35 34
2010-04-07 48 35 33
2010-03-21 15 13 10
Unresolved regressions
----------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16431
Subject : does not seem to shut down one of two md raid-1 arrays on hibernation
Submitter : Martin Steigerwald <ms@teamix.de>
Date : 2010-07-21 13:08 (12 days old)
Handled-By : Neil Brown <neilb@suse.de>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16388
Subject : i915 drm BUG: unable to handle kernel paging request at a5e89046
Submitter : <lists@clanduggan.org>
Date : 2010-07-14 16:59 (19 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16377
Subject : X.org crash while running a OpenGL composited KDE 4.4.4 session with Radeon KMS
Submitter : Martin Steigerwald <Martin@Lichtvoll.de>
Date : 2010-07-13 12:41 (20 days old)
Handled-By : Alex Deucher <alexdeucher@gmail.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16376
Subject : random - possibly Radeon DRM KMS related - freezes
Submitter : Martin Steigerwald <Martin@Lichtvoll.de>
Date : 2010-07-13 09:24 (20 days old)
Handled-By : Alex Deucher <alexdeucher@gmail.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16320
Subject : iwl3945 crashes, seems to be disconnecting from the PCI bus
Submitter : Satish <eerpini@gmail.com>
Date : 2010-07-01 08:24 (32 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16300
Subject : [2.6.34 regression] mplayer gets out of sync due to problems with ALSA
Submitter : Artem S. Tashkinov <t.artem@mailcity.com>
Date : 2010-06-26 20:39 (37 days old)
Handled-By : Takashi Iwai <tiwai@suse.de>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16270
Subject : Image is a hit-or-a-miss. Often displayed green+purple
Submitter : Vish <drkvi-a@yahoo.com>
Date : 2010-06-22 10:47 (41 days old)
First-Bad-Commit: http://git.kernel.org/linus/acef4a407ed6e0a9ed87a2747be592fe49e64bdd
Handled-By : Jean-Francois Moine <moinejf@free.fr>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16206
Subject : PROBLEM: PPP and other serial port related application hangs in kernel space
Submitter : Ales Teska <ales.teska@gmail.com>
Date : 2010-06-09 20:46 (54 days old)
Message-ID : <900E3B14-5B92-4A37-9581-049DB40F4D1C@gmail.com>
References : http://marc.info/?l=linux-kernel&m=127611640301071&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16170
Subject : Leadtek Winfast DTV Dongle (STK7700P based) is not working in 2.6.34
Submitter : <macjariel@gmail.com>
Date : 2010-06-09 11:11 (54 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16139
Subject : wait_even_interruptible_timeout(), signal, spin_lock() = system hang
Submitter : Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Date : 2010-05-28 16:44 (66 days old)
Message-ID : <AANLkTiliRFydAhxH2-Dp1RKuz6sq7vgWIcMvLMi68ftg@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127506510328758&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15977
Subject : WARNING: at lib/dma-debug.c:866 check_for_stack
Submitter : Zdenek Kabelac <zdenek.kabelac@gmail.com>
Date : 2010-05-14 8:56 (80 days old)
Message-ID : <AANLkTikyx2eaxaiUCFDSfpmn1UG0t2GOxArz6F4wp1LJ@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127382742729825&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15912
Subject : Audio/video sync and crackling issues with snd-hda-intel (AD1981 codec)
Submitter : Øyvind Stegard <oyvinst@ifi.uio.no>
Date : 2010-05-05 16:20 (89 days old)
Handled-By : Jaroslav Kysela <perex@perex.cz>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15862
Subject : 2.6.34-rc4/5: iwlagn unusable until reload
Submitter : Nico Schottelius <nico-linux-20100427@schottelius.org>
Date : 2010-04-27 7:49 (97 days old)
Message-ID : <20100427074934.GB3261@ikn.schottelius.org>
References : http://marc.info/?l=linux-kernel&m=127235784004839&w=2
Handled-By : Johannes Berg <johannes@sipsolutions.net>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15704
Subject : [r8169] WARNING: at net/sched/sch_generic.c
Submitter : Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date : 2010-03-31 10:21 (124 days old)
Message-ID : <20100331102142.GA3294@swordfish.minsk.epam.com>
References : http://marc.info/?l=linux-kernel&m=127003090406108&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15673
Subject : 2.6.34-rc2: "ima_dec_counts: open/free imbalance"?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Date : 2010-03-28 11:31 (127 days old)
Message-ID : <1269775909.5301.4.camel@localhost.localdomain>
References : http://marc.info/?l=linux-kernel&m=126977593326800&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=15664
Subject : Graphics hang and kernel backtrace when starting Azureus with Compiz enabled
Submitter : Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Date : 2010-04-01 01:09 (123 days old)
Regressions with patches
------------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16007
Subject : x86/pci Oops with CONFIG_SND_HDA_INTEL
Submitter : Graham Ramsey <ramsey.graham@ntlworld.com>
Date : 2010-05-19 17:09 (75 days old)
Handled-By : Yinghai Lu <yinghai@kernel.org>
Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch : https://patchwork.kernel.org/patch/105662/
For details, please visit the bug entries and follow the links given in
references.
As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.33 and 2.6.34, unresolved as well as resolved, at:
http://bugzilla.kernel.org/show_bug.cgi?id=15310
Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* 2.6.35-rc6-git6: Reported regressions from 2.6.34
From: Rafael J. Wysocki @ 2010-08-01 13:46 UTC (permalink / raw)
To: Linux Kernel Mailing List
Cc: Maciej Rutecki, Andrew Morton, Linus Torvalds,
Kernel Testers List, Network Development, Linux ACPI,
Linux PM List, Linux SCSI List, Linux Wireless List, DRI
This message contains a list of some regressions from 2.6.34,
for which there are no fixes in the mainline known to the tracking team.
If any of them have been fixed already, please let us know.
If you know of any other unresolved regressions from 2.6.34, please let us
know either and we'll add them to the list. Also, please let us know
if any of the entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply
to this message with CCs to the people involved in reporting and handling
the issue.
Listed regressions statistics:
Date Total Pending Unresolved
----------------------------------------
2010-08-01 100 27 23
2010-07-23 94 33 25
2010-07-09 79 45 37
2010-06-21 46 37 26
2010-06-09 15 13 10
Unresolved regressions
----------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16462
Subject : unable to connect to AP on legal channels 12/13
Submitter : Daniel J Blueman <daniel.blueman@gmail.com>
Date : 2010-07-25 17:06 (8 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16458
Subject : Bluetooth disabled after resume
Submitter : AttilaN <attila123456@gmail.com>
Date : 2010-07-25 09:33 (8 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16450
Subject : MTD drivers cannot be unloaded
Submitter : Ben Hutchings <bhutchings@solarflare.com>
Date : 2010-07-24 00:17 (9 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16448
Subject : 2.6.35-rc5 panic at __br_deliver+0x64/0xe0 with kvm bridge networking
Submitter : caiqian@redhat.com
Date : 2010-07-23 3:25 (10 days old)
Message-ID : <198123598.1050221279855515402.JavaMail.root@zmail06.collab.prod.int.phx2.redhat.com>
References : http://marc.info/?l=linux-kernel&m=127985553916052&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16423
Subject : netfilter/iptables stopped logging 2.6.35-rc
Submitter : auto401300@hushmail.com
Date : 2010-07-17 10:20 (16 days old)
Message-ID : <20100717072036.1BBE52804B@smtp.hushmail.com>
References : http://lkml.indiana.edu/hypermail/linux/kernel/1007.2/00440.html
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16406
Subject : Badness with the kernel version 2.6.35-rc1-git1 running on P6 box
Submitter : divya <dipraksh@linux.vnet.ibm.com>
Date : 2010-07-16 8:50 (17 days old)
Message-ID : <4C401D56.3070108@linux.vnet.ibm.com>
References : http://marc.info/?l=linux-kernel&m=127927024906085&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16400
Subject : 2.6.35-rc5 inconsistent lock state
Submitter : Martin Pirker <lkml.collector@gmail.com>
Date : 2010-07-14 20:33 (19 days old)
Message-ID : <AANLkTikDF0TL6OyPVCzPlUTwxFehcrETn3ysgSSeTq92@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127913961025267&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16399
Subject : perf failed with kernel 2.6.35-rc
Submitter : Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Date : 2010-07-13 8:14 (20 days old)
First-Bad-Commit: http://git.kernel.org/linus/1ac62cfff252fb668405ef3398a1fa7f4a0d6d15
Message-ID : <1279008849.2096.913.camel@ymzhang.sh.intel.com>
References : http://marc.info/?l=linux-kernel&m=127900880212470&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16396
Subject : [bisected] resume from suspend freezes system
Submitter : tomas m <tmezzadra@gmail.com>
Date : 2010-07-15 02:32 (18 days old)
Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16393
Subject : kernel BUG at fs/block_dev.c:765!
Submitter : Markus Trippelsdorf <markus@trippelsdorf.de>
Date : 2010-07-14 13:52 (19 days old)
Message-ID : <20100714135217.GA1797@arch.tripp.de>
References : http://marc.info/?l=linux-kernel&m=127911564213748&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16383
Subject : Regression with e1000e from 2.6.34.1 to 2.6.35-rc5
Submitter : Stefan Behte <craig@haquarter.de>
Date : 2010-07-14 00:44 (19 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16380
Subject : Loop devices act strangely in 2.6.35
Submitter : Artem S. Tashkinov <t.artem@mailcity.com>
Date : 2010-07-13 23:21 (20 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16369
Subject : Yet another 2.6.35 regression (AGP)?
Submitter : Woody Suwalski <terraluna977@gmail.com>
Date : 2010-07-09 14:21 (24 days old)
Message-ID : <4C373084.8000503@gmail.com>
References : http://marc.info/?l=linux-kernel&m=127868797119254&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16365
Subject : kernel BUG at fs/btrfs/extent-tree.c:1353
Submitter : Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Date : 2010-07-08 14:27 (25 days old)
Message-ID : <201007081627.24654.johannes.hirte@fem.tu-ilmenau.de>
References : http://marc.info/?l=linux-kernel&m=127859960725931&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16337
Subject : general protection fault: 0000 [#1] SMP
Submitter : Justin P. Mattock <justinmattock@gmail.com>
Date : 2010-07-03 22:59 (30 days old)
Message-ID : <4C2FC0E3.6050101@gmail.com>
References : http://marc.info/?l=linux-kernel&m=127819798215589&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16322
Subject : WARNING: at /arch/x86/include/asm/processor.h:1005 read_measured_perf_ctrs+0x5a/0x70()
Submitter : boris64 <bugzilla.kernel.org@boris64.net>
Date : 2010-07-01 13:54 (32 days old)
Handled-By : H. Peter Anvin <hpa@zytor.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16307
Subject : i915 in kernel 2.6.35-rc3, high number of wakeups
Submitter : Enrico Bandiello <enban@postal.uv.es>
Date : 2010-06-26 16:57 (37 days old)
Message-ID : <<4C26317A.5070309@postal.uv.es>>
References : http://marc.info/?l=linux-kernel&m=127757403404259&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16265
Subject : Why is kslowd accumulating so much CPU time?
Submitter : Theodore Ts'o <tytso@mit.edu>
Date : 2010-06-09 18:36 (54 days old)
First-Bad-Commit: http://git.kernel.org/linus/fbf81762e385d3d45acad057b654d56972acf58c
Message-ID : <E1OMQ88-0002a1-Gb@closure.thunk.org>
References : http://marc.info/?l=linux-kernel&m=127610857819033&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16228
Subject : BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine)
Submitter : Brian Bloniarz <phunge0@hotmail.com>
Date : 2010-06-16 17:57 (47 days old)
Handled-By : Bjorn Helgaas <bjorn.helgaas@hp.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16221
Subject : 2.6.35-rc2-git5 -- [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Submitter : Miles Lane <miles.lane@gmail.com>
Date : 2010-06-11 20:31 (52 days old)
Message-ID : <AANLkTim0jVRyqkwlGOcrg_XTvUQwcBYfWJX-aRzkkrLG@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127628828119623&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16215
Subject : sysfs: cannot create duplicate filename '/class/net/bnep0'
Submitter : Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date : 2010-06-15 14:55 (48 days old)
Handled-By : Eric W. Biederman <ebiederm@xmission.com>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16184
Subject : Container, X86-64, i386, iptables rule
Submitter : Jean-Marc Pigeon <jmp@safe.ca>
Date : 2010-06-12 04:17 (51 days old)
Handled-By : Patrick McHardy <kaber@trash.net>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16173
Subject : After uncompressing the kernel, at boot time, the server hangs.
Submitter : David Hill <hilld@binarystorm.net>
Date : 2010-06-09 23:25 (54 days old)
First-Bad-Commit: http://git.kernel.org/linus/cf7500c0ea133d66f8449d86392d83f840102632
Handled-By : Eric W. Biederman <ebiederm@xmission.com>
Regressions with patches
------------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16405
Subject : Brightness Adjustment on Toshiba nb305 Netbooks is non-functional.
Submitter : John Mesmon <jmesmon@gmail.com>
Date : 2010-07-15 23:40 (18 days old)
First-Bad-Commit: http://git.kernel.org/linus/74a365b3f354fafc537efa5867deb7a9fadbfe27
Handled-By : Matthew Garrett <mjg59-kernel@srcf.ucam.org>
Patch : https://bugzilla.kernel.org/attachment.cgi?id=27236
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16312
Subject : WARNING: at fs/fs-writeback.c:1127 __mark_inode_dirty
Submitter : Zdenek Kabelac <zdenek.kabelac@gmail.com>
Date : 2010-06-28 9:40 (35 days old)
Message-ID : <AANLkTin24fr5O4_q5Xbo9Y_NKkEmtcp6Hgmr9_4qXaFz@mail.gmail.com>
References : http://marc.info/?l=linux-kernel&m=127771804806465&w=2
Handled-By : Jan Kara <jack@suse.cz>
Patch : https://bugzilla.kernel.org/attachment.cgi?id=27272
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16310
Subject : arm omap invalid module format
Submitter : Robert Nelson <robertcnelson@gmail.com>
Date : 2010-06-28 17:30 (35 days old)
First-Bad-Commit: http://git.kernel.org/linus/d0679c730395d0bde9a46939e7ba255b4ba7dd7c
Handled-By : Michal Marek <mmarek@suse.cz>
Patch : https://bugzilla.kernel.org/attachment.cgi?id=26999
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16278
Subject : lvm snapshot causes deadlock in 2.6.35
Submitter : Phillip Susi <psusi@cfl.rr.com>
Date : 2010-06-23 16:55 (40 days old)
Handled-By : Eric Sandeen <sandeen@redhat.com>
Patch : https://bugzilla.kernel.org/attachment.cgi?id=26933
For details, please visit the bug entries and follow the links given in
references.
As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.34,
unresolved as well as resolved, at:
http://bugzilla.kernel.org/show_bug.cgi?id=16055
Please let the tracking team know if there are any Bugzilla entries that
should be added to the list in there.
Thanks!
^ permalink raw reply
* Re: [PATCH staging] Add SBE 2T3E3 WAN driver
From: Krzysztof Halasa @ 2010-08-01 13:23 UTC (permalink / raw)
To: Greg KH; +Cc: netdev
In-Reply-To: <20100801002713.GA6751@kroah.com>
Greg KH <greg@kroah.com> writes:
>> These entries are also needed for the tulip Ethernet driver, to avoid
>> initializing these ports (they are using Tulip DECchips with custom FPGA
>> for HDLC). I posted a patch on netdev list.
>
> Then make the patch part of that submission, I can't add non-staging
> patches to the drivers/staging/ tree if at all possible.
I did, I just didn't want a dependency and thus the change to
pci_ids.h is present in both patches, with the assumption git will take
care of it when merging.
>> The main reason is the interface ("PRIVATE" netdev ioctls) for
>> controlling the hdlcX devices is not stable. The plan is to write a new
>> user-kernel interface for generic HDLC, this driver (and other ones)
>> will then use it. For now, there is a separate utility from SBE for this
>> card.
>
> Ah, ick. Is this going to be fixed up anytime soon?
Well, I hope so. Depends on the definition of "soon", though. Something
like several months, realistically.
> Care to respin this with the TODO file?`
Will do, sure.
> And look, you do have a copy of the file, right there. Care to post it
> somewhere? We need to see the license and other markings on it to know
> about this driver, right? Where did you get it from?
I got it from a friend along with a card. That's exactly what they
received from SBE. It's a driver for older Linux only, something like
up to 2.6.20 maybe. I'm told they have no newer version (i.e. working
with newer kernels; they may have a version with the new company name).
SBE (embedded devices division?) doesn't exist anymore, but this
particular piece of hardware is there:
http://www.onestopsystems.com/communication_wan_f.php
I posted the driver here:
http://userweb.kernel.org/~chris/SBE_2T3_Linux_2.0c.tgz
>> It seems the DRV_NAME is only used for various printk() and for
>> pci_request_regions(). Does it still cause problems?
>
> It's not nice, hopefully you can fix it up. Well, remove it entirely
> would be good, but you can add that to the TODO file :)
Ah, doing a simple search & replace isn't a problem for me. Just wanted
to confirm it's not nice.
Will post a revised patch shortly, of course.
--
Krzysztof Halasa
^ permalink raw reply
* [PATCH 08/11] pcmcia: use struct resource for PCMCIA devices, part 2
From: Dominik Brodowski @ 2010-08-01 12:59 UTC (permalink / raw)
To: linux-pcmcia
Cc: Dominik Brodowski, linux-mtd, netdev, linux-wireless, Jiri Kosina
In-Reply-To: <20100801125749.GA2564@comet.dominikbrodowski.net>
Use struct resource * also for iomem resources.
CC: linux-mtd@lists.infradead.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/char/pcmcia/ipwireless/main.c | 13 +-----
drivers/mtd/maps/pcmciamtd.c | 1 -
drivers/net/pcmcia/ibmtr_cs.c | 1 -
drivers/net/wireless/b43/pcmcia.c | 3 +-
drivers/net/wireless/ray_cs.c | 8 ----
drivers/pcmcia/cs_internal.h | 1 +
drivers/pcmcia/ds.c | 7 ++-
drivers/pcmcia/pcmcia_resource.c | 70 ++++++++++++++++++---------------
include/pcmcia/cs.h | 35 +++++++----------
include/pcmcia/ds.h | 15 ++++++-
10 files changed, 74 insertions(+), 80 deletions(-)
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 6c4aa4b..67bdb05 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -157,15 +157,12 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
return 0;
exit3:
- pcmcia_release_window(p_dev, ipw->handle_attr_memory);
exit2:
if (ipw->common_memory) {
release_mem_region(ipw->request_common_memory.Base,
ipw->request_common_memory.Size);
iounmap(ipw->common_memory);
- pcmcia_release_window(p_dev, ipw->handle_common_memory);
- } else
- pcmcia_release_window(p_dev, ipw->handle_common_memory);
+ }
exit1:
release_resource(io_resource);
pcmcia_disable_device(p_dev);
@@ -238,13 +235,12 @@ exit:
release_mem_region(ipw->request_attr_memory.Base,
ipw->request_attr_memory.Size);
iounmap(ipw->attr_memory);
- pcmcia_release_window(link, ipw->handle_attr_memory);
+
}
if (ipw->common_memory) {
release_mem_region(ipw->request_common_memory.Base,
ipw->request_common_memory.Size);
iounmap(ipw->common_memory);
- pcmcia_release_window(link, ipw->handle_common_memory);
}
pcmcia_disable_device(link);
return -1;
@@ -262,11 +258,6 @@ static void release_ipwireless(struct ipw_dev *ipw)
ipw->request_attr_memory.Size);
iounmap(ipw->attr_memory);
}
- if (ipw->common_memory)
- pcmcia_release_window(ipw->link, ipw->handle_common_memory);
- if (ipw->attr_memory)
- pcmcia_release_window(ipw->link, ipw->handle_attr_memory);
-
pcmcia_disable_device(ipw->link);
}
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index f97463e..e9ca5ba 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -344,7 +344,6 @@ static void pcmciamtd_release(struct pcmcia_device *link)
iounmap(dev->win_base);
dev->win_base = NULL;
}
- pcmcia_release_window(link, link->win);
}
pcmcia_disable_device(link);
}
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index c0b3cdd..b0d06a3 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -319,7 +319,6 @@ static void ibmtr_release(struct pcmcia_device *link)
if (link->win) {
struct tok_info *ti = netdev_priv(dev);
iounmap(ti->mmio);
- pcmcia_release_window(link, info->sram_win_handle);
}
pcmcia_disable_device(link);
}
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index ffe1f89..dfbc41d 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -76,8 +76,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
- win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
- WIN_ENABLE | WIN_DATA_WIDTH_16 |
+ win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
win.Base = 0;
win.Size = SSB_CORE_SIZE;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 7eb339a..a860bce 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -785,7 +785,6 @@ static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
ray_dev_t *local = netdev_priv(dev);
- int i;
dev_dbg(&link->dev, "ray_release\n");
@@ -794,13 +793,6 @@ static void ray_release(struct pcmcia_device *link)
iounmap(local->sram);
iounmap(local->rmem);
iounmap(local->amem);
- /* Do bother checking to see if these succeed or not */
- i = pcmcia_release_window(link, local->amem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
- i = pcmcia_release_window(link, local->rmem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
dev_dbg(&link->dev, "ray_release ending\n");
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 511ac75..37d38b5 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -40,6 +40,7 @@ typedef struct config_t {
unsigned int CardValues;
struct resource io[MAX_IO_WIN]; /* io ports */
+ struct resource mem[MAX_WIN]; /* mem areas */
struct {
u_int Attributes;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 7ddd19a..61de128 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -552,13 +552,16 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
}
p_dev->function_config = c;
kref_init(&c->ref);
- for (i = 0; i < MAX_IO_WIN; i++) {
+ for (i = 0; i < (MAX_IO_WIN + MAX_WIN); i++) {
c->io[i].name = dev_name(&p_dev->dev);
- c->io[i].flags = IORESOURCE_IO;
+ c->io[i].flags = i < MAX_IO_WIN ? IORESOURCE_IO :
+ IORESOURCE_MEM;
}
}
for (i = 0; i < MAX_IO_WIN; i++)
p_dev->resource[i] = &p_dev->function_config->io[i];
+ for (; i < (MAX_IO_WIN + MAX_WIN); i++)
+ p_dev->resource[i] = &p_dev->function_config->mem[i-MAX_IO_WIN];
mutex_unlock(&s->ops_mutex);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 975baaa..01f8e56 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -196,15 +196,17 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
unsigned int offset)
{
struct pcmcia_socket *s = p_dev->socket;
+ struct resource *res = wh;
+ unsigned int w;
int ret;
- wh--;
- if (wh >= MAX_WIN)
+ w = ((res->flags & IORESOURCE_BITS & WIN_FLAGS_REQ) >> 2) - 1;
+ if (w >= MAX_WIN)
return -EINVAL;
mutex_lock(&s->ops_mutex);
- s->win[wh].card_start = offset;
- ret = s->ops->set_mem_map(s, &s->win[wh]);
+ s->win[w].card_start = offset;
+ ret = s->ops->set_mem_map(s, &s->win[w]);
if (ret)
dev_warn(&s->dev, "failed to set_mem_map\n");
mutex_unlock(&s->ops_mutex);
@@ -371,19 +373,22 @@ out:
} /* pcmcia_release_io */
-int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
+int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res)
{
struct pcmcia_socket *s = p_dev->socket;
pccard_mem_map *win;
+ unsigned int w;
- wh--;
- if (wh >= MAX_WIN)
+ dev_dbg(&p_dev->dev, "releasing window %pR\n", res);
+
+ w = ((res->flags & IORESOURCE_BITS & WIN_FLAGS_REQ) >> 2) - 1;
+ if (w >= MAX_WIN)
return -EINVAL;
mutex_lock(&s->ops_mutex);
- win = &s->win[wh];
+ win = &s->win[w];
- if (!(p_dev->_win & CLIENT_WIN_REQ(wh))) {
+ if (!(p_dev->_win & CLIENT_WIN_REQ(w))) {
dev_dbg(&s->dev, "not releasing unknown window\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
@@ -392,7 +397,7 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
/* Shut down memory window */
win->flags &= ~MAP_ACTIVE;
s->ops->set_mem_map(s, win);
- s->state &= ~SOCKET_WIN_REQ(wh);
+ s->state &= ~SOCKET_WIN_REQ(w);
/* Release system memory */
if (win->res) {
@@ -400,7 +405,7 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
kfree(win->res);
win->res = NULL;
}
- p_dev->_win &= ~CLIENT_WIN_REQ(wh);
+ p_dev->_win &= ~CLIENT_WIN_REQ(w);
mutex_unlock(&s->ops_mutex);
return 0;
@@ -775,23 +780,18 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
struct pcmcia_socket *s = p_dev->socket;
pccard_mem_map *win;
u_long align;
+ struct resource *res;
int w;
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "No card present\n");
return -ENODEV;
}
- if (req->Attributes & (WIN_PAGED | WIN_SHARED)) {
- dev_dbg(&s->dev, "bad attribute setting for iomem region\n");
- return -EINVAL;
- }
/* Window size defaults to smallest available */
if (req->Size == 0)
req->Size = s->map_size;
- align = (((s->features & SS_CAP_MEM_ALIGN) ||
- (req->Attributes & WIN_STRICT_ALIGN)) ?
- req->Size : s->map_size);
+ align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size;
if (req->Size & (s->map_size-1)) {
dev_dbg(&s->dev, "invalid map size\n");
return -EINVAL;
@@ -805,20 +805,21 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
align = 0;
/* Allocate system memory window */
+ mutex_lock(&s->ops_mutex);
for (w = 0; w < MAX_WIN; w++)
if (!(s->state & SOCKET_WIN_REQ(w)))
break;
if (w == MAX_WIN) {
dev_dbg(&s->dev, "all windows are used already\n");
+ mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
- mutex_lock(&s->ops_mutex);
win = &s->win[w];
if (!(s->features & SS_CAP_STATIC_MAP)) {
win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
- (req->Attributes & WIN_MAP_BELOW_1MB), s);
+ 0, s);
if (!win->res) {
dev_dbg(&s->dev, "allocating mem region failed\n");
mutex_unlock(&s->ops_mutex);
@@ -829,16 +830,8 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
/* Configure the socket controller */
win->map = w+1;
- win->flags = 0;
+ win->flags = req->Attributes;
win->speed = req->AccessSpeed;
- if (req->Attributes & WIN_MEMORY_TYPE)
- win->flags |= MAP_ATTRIB;
- if (req->Attributes & WIN_ENABLE)
- win->flags |= MAP_ACTIVE;
- if (req->Attributes & WIN_DATA_WIDTH_16)
- win->flags |= MAP_16BIT;
- if (req->Attributes & WIN_USE_WAIT)
- win->flags |= MAP_USE_WAIT;
win->card_start = 0;
if (s->ops->set_mem_map(s, win) != 0) {
@@ -854,8 +847,16 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
else
req->Base = win->res->start;
+ /* convert to new-style resources */
+ res = p_dev->resource[w + MAX_IO_WIN];
+ res->start = req->Base;
+ res->end = req->Base + req->Size - 1;
+ res->flags &= ~IORESOURCE_BITS;
+ res->flags |= (req->Attributes & WIN_FLAGS_MAP) | (win->map << 2);
+ dev_dbg(&s->dev, "request_window results in %pR\n", res);
+
mutex_unlock(&s->ops_mutex);
- *wh = w + 1;
+ *wh = res;
return 0;
} /* pcmcia_request_window */
@@ -863,13 +864,18 @@ EXPORT_SYMBOL(pcmcia_request_window);
void pcmcia_disable_device(struct pcmcia_device *p_dev)
{
+ int i;
+ for (i = 0; i < MAX_WIN; i++) {
+ struct resource *res = p_dev->resource[MAX_IO_WIN + i];
+ if (res->flags & WIN_FLAGS_REQ)
+ pcmcia_release_window(p_dev, res);
+ }
+
pcmcia_release_configuration(p_dev);
pcmcia_release_io(p_dev);
if (p_dev->_irq) {
free_irq(p_dev->irq, p_dev->priv);
p_dev->_irq = 0;
}
- if (p_dev->win)
- pcmcia_release_window(p_dev, p_dev->win);
}
EXPORT_SYMBOL(pcmcia_disable_device);
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index e4faf44..68d8bde 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -77,26 +77,19 @@ typedef struct win_req_t {
} win_req_t;
/* Attributes for RequestWindow */
-#define WIN_ADDR_SPACE 0x0001
-#define WIN_ADDR_SPACE_MEM 0x0000
-#define WIN_ADDR_SPACE_IO 0x0001
-#define WIN_MEMORY_TYPE 0x0002
-#define WIN_MEMORY_TYPE_CM 0x0000
-#define WIN_MEMORY_TYPE_AM 0x0002
-#define WIN_ENABLE 0x0004
-#define WIN_DATA_WIDTH 0x0018
-#define WIN_DATA_WIDTH_8 0x0000
-#define WIN_DATA_WIDTH_16 0x0008
-#define WIN_DATA_WIDTH_32 0x0010
-#define WIN_PAGED 0x0020
-#define WIN_SHARED 0x0040
-#define WIN_FIRST_SHARED 0x0080
-#define WIN_USE_WAIT 0x0100
-#define WIN_STRICT_ALIGN 0x0200
-#define WIN_MAP_BELOW_1MB 0x0400
-#define WIN_PREFETCH 0x0800
-#define WIN_CACHEABLE 0x1000
-#define WIN_BAR_MASK 0xe000
-#define WIN_BAR_SHIFT 13
+#define WIN_MEMORY_TYPE_CM 0x00 /* default */
+#define WIN_MEMORY_TYPE_AM 0x20 /* MAP_ATTRIB */
+#define WIN_DATA_WIDTH_8 0x00 /* default */
+#define WIN_DATA_WIDTH_16 0x02 /* MAP_16BIT */
+#define WIN_ENABLE 0x01 /* MAP_ACTIVE */
+#define WIN_USE_WAIT 0x40 /* MAP_USE_WAIT */
+
+#define WIN_FLAGS_MAP 0x63 /* MAP_ATTRIB | MAP_16BIT | MAP_ACTIVE |
+ MAP_USE_WAIT */
+#define WIN_FLAGS_REQ 0x1c /* mapping to socket->win[i]:
+ 0x04 -> 0
+ 0x08 -> 1
+ 0x0c -> 2
+ 0x10 -> 3 */
#endif /* _LINUX_CS_H */
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index a2bf3a7..70c58ed 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -36,7 +36,7 @@ struct pcmcia_device;
struct config_t;
struct net_device;
-typedef unsigned long window_handle_t;
+typedef struct resource *window_handle_t;
/* dynamic device IDs for PCMCIA device drivers. See
* Documentation/pcmcia/driver.txt for details.
@@ -63,6 +63,17 @@ struct pcmcia_driver {
int pcmcia_register_driver(struct pcmcia_driver *driver);
void pcmcia_unregister_driver(struct pcmcia_driver *driver);
+/* for struct resource * array embedded in struct pcmcia_device */
+enum {
+ PCMCIA_IOPORT_0,
+ PCMCIA_IOPORT_1,
+ PCMCIA_IOMEM_0,
+ PCMCIA_IOMEM_1,
+ PCMCIA_IOMEM_2,
+ PCMCIA_IOMEM_3,
+ PCMCIA_NUM_RESOURCES,
+};
+
struct pcmcia_device {
/* the socket and the device_no [for multifunction devices]
uniquely define a pcmcia_device */
@@ -85,7 +96,7 @@ struct pcmcia_device {
/* device setup */
unsigned int irq;
- struct resource *resource[MAX_IO_WIN];
+ struct resource *resource[PCMCIA_NUM_RESOURCES];
unsigned int io_lines; /* number of I/O lines */
--
1.7.0.4
^ permalink raw reply related
* [PATCH 07/11] pcmcia: remove memreq_t
From: Dominik Brodowski @ 2010-08-01 12:59 UTC (permalink / raw)
To: linux-pcmcia
Cc: Dominik Brodowski, netdev, linux-wireless, linux-ide, linux-usb,
laforge, linux-mtd, linux-bluetooth, alsa-devel, linux-serial,
Michael Buesch
In-Reply-To: <20100801125749.GA2564@comet.dominikbrodowski.net>
Page already had to be set to 0; Offset can easily be passed as
parameter to pcmcia_map_mem_page.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/char/pcmcia/ipwireless/main.c | 14 ++------------
drivers/isdn/hisax/sedlbauer_cs.c | 7 +++----
drivers/mtd/maps/pcmciamtd.c | 13 ++++++-------
drivers/net/pcmcia/fmvj18x_cs.c | 10 ++--------
drivers/net/pcmcia/ibmtr_cs.c | 11 +++--------
drivers/net/pcmcia/pcnet_cs.c | 14 ++++----------
drivers/net/pcmcia/smc91c92_cs.c | 9 +++------
drivers/net/pcmcia/xirc2ps_cs.c | 5 +----
drivers/net/wireless/airo_cs.c | 6 ++----
drivers/net/wireless/b43/pcmcia.c | 5 +----
drivers/net/wireless/ray_cs.c | 13 +++----------
drivers/pcmcia/pcmcia_resource.c | 9 +++------
drivers/scsi/pcmcia/nsp_cs.c | 5 ++---
drivers/staging/comedi/drivers/ni_daq_700.c | 6 ++----
drivers/staging/comedi/drivers/ni_daq_dio24.c | 6 ++----
drivers/staging/comedi/drivers/ni_labpc_cs.c | 6 ++----
include/pcmcia/cs.h | 6 ------
include/pcmcia/ds.h | 2 +-
18 files changed, 42 insertions(+), 105 deletions(-)
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 5f87b9f..6c4aa4b 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -84,8 +84,6 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
{
struct ipw_dev *ipw = priv_data;
struct resource *io_resource;
- memreq_t memreq_attr_memory;
- memreq_t memreq_common_memory;
int ret;
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
@@ -121,11 +119,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
if (ret != 0)
goto exit1;
- memreq_common_memory.CardOffset = cfg->mem.win[0].card_addr;
- memreq_common_memory.Page = 0;
-
ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory,
- &memreq_common_memory);
+ cfg->mem.win[0].card_addr);
if (ret != 0)
goto exit2;
@@ -150,12 +145,7 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
if (ret != 0)
goto exit2;
- memreq_attr_memory.CardOffset = 0;
- memreq_attr_memory.Page = 0;
-
- ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory,
- &memreq_attr_memory);
-
+ ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0);
if (ret != 0)
goto exit3;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 4755eb4..0b06dbb 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -232,7 +232,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
*/
if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- memreq_t map;
req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
req->Attributes |= WIN_ENABLE;
req->Base = mem->win[0].host_addr;
@@ -240,9 +239,9 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
req->AccessSpeed = 0;
if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
+
+ if (pcmcia_map_mem_page(p_dev, p_dev->win,
+ mem->win[0].card_addr) != 0)
return -ENODEV;
}
return 0;
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 7948816..f97463e 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -102,7 +102,7 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
{
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
window_handle_t win = (window_handle_t)map->map_priv_2;
- memreq_t mrq;
+ unsigned int offset;
int ret;
if (!pcmcia_dev_present(dev->p_dev)) {
@@ -110,15 +110,14 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
return 0;
}
- mrq.CardOffset = to & ~(dev->win_size-1);
- if(mrq.CardOffset != dev->offset) {
+ offset = to & ~(dev->win_size-1);
+ if (offset != dev->offset) {
DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
- dev->offset, mrq.CardOffset);
- mrq.Page = 0;
- ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq);
+ dev->offset, offset);
+ ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
if (ret != 0)
return NULL;
- dev->offset = mrq.CardOffset;
+ dev->offset = offset;
}
return dev->win_base + (to & (dev->win_size-1));
}
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 6993044..98fffb0 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -545,7 +545,6 @@ failed:
static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
{
win_req_t req;
- memreq_t mem;
u_char __iomem *base;
int i, j;
@@ -558,9 +557,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
return -1;
base = ioremap(req.Base, req.Size);
- mem.Page = 0;
- mem.CardOffset = 0;
- pcmcia_map_mem_page(link, link->win, &mem);
+ pcmcia_map_mem_page(link, link->win, 0);
/*
* MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
@@ -594,7 +591,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
static int fmvj18x_setup_mfc(struct pcmcia_device *link)
{
win_req_t req;
- memreq_t mem;
int i;
struct net_device *dev = link->priv;
unsigned int ioaddr;
@@ -614,9 +610,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
return -1;
}
- mem.Page = 0;
- mem.CardOffset = 0;
- i = pcmcia_map_mem_page(link, link->win, &mem);
+ i = pcmcia_map_mem_page(link, link->win, 0);
if (i != 0) {
iounmap(lp->base);
lp->base = NULL;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 3fd8595..c0b3cdd 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -211,7 +211,6 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
struct net_device *dev = info->dev;
struct tok_info *ti = netdev_priv(dev);
win_req_t req;
- memreq_t mem;
int i, ret;
dev_dbg(&link->dev, "ibmtr_config\n");
@@ -250,9 +249,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
if (ret)
goto failed;
- mem.CardOffset = mmiobase;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ ret = pcmcia_map_mem_page(link, link->win, mmiobase);
if (ret)
goto failed;
ti->mmio = ioremap(req.Base, req.Size);
@@ -267,13 +264,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
if (ret)
goto failed;
- mem.CardOffset = srambase;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem);
+ ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase);
if (ret)
goto failed;
- ti->sram_base = mem.CardOffset >> 12;
+ ti->sram_base = srambase >> 12;
ti->sram_virt = ioremap(req.Base, req.Size);
ti->sram_phys = req.Base;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9c5fc9d..c3edfe4 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -301,7 +301,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
win_req_t req;
- memreq_t mem;
u_char __iomem *base, *virt;
int i, j;
@@ -314,10 +313,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
return NULL;
virt = ioremap(req.Base, req.Size);
- mem.Page = 0;
for (i = 0; i < NR_INFO; i++) {
- mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
- pcmcia_map_mem_page(link, link->win, &mem);
+ pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1));
base = &virt[hw_info[i].offset & (req.Size-1)];
if ((readb(base+0) == hw_info[i].a0) &&
(readb(base+2) == hw_info[i].a1) &&
@@ -1463,7 +1460,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
win_req_t req;
- memreq_t mem;
int i, window_size, offset, ret;
window_size = (stop_pg - start_pg) << 8;
@@ -1482,11 +1478,9 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
if (ret)
goto failed;
- mem.CardOffset = (start_pg << 8) + cm_offset;
- offset = mem.CardOffset % window_size;
- mem.CardOffset -= offset;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ offset = (start_pg << 8) + cm_offset;
+ offset -= offset % window_size;
+ ret = pcmcia_map_mem_page(link, link->win, offset);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index a5e4779..377367d 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -443,7 +443,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
win_req_t req;
- memreq_t mem;
+ unsigned int offset;
int i;
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -467,11 +467,8 @@ static int mhz_mfc_config(struct pcmcia_device *link)
return -ENODEV;
smc->base = ioremap(req.Base, req.Size);
- mem.CardOffset = mem.Page = 0;
- if (smc->manfid == MANFID_MOTOROLA)
- mem.CardOffset = link->conf.ConfigBase;
- i = pcmcia_map_mem_page(link, link->win, &mem);
-
+ offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
+ i = pcmcia_map_mem_page(link, link->win, offset);
if ((i == 0) &&
(smc->manfid == MANFID_MEGAHERTZ) &&
(smc->cardid == PRODID_MEGAHERTZ_EM3288))
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index e051d3a..931d28e 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -870,7 +870,6 @@ xirc2ps_config(struct pcmcia_device * link)
if (local->dingo) {
win_req_t req;
- memreq_t mem;
/* Reset the modem's BAR to the correct value
* This is necessary because in the RequestConfiguration call,
@@ -898,9 +897,7 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
- mem.CardOffset = 0x0;
- mem.Page = 0;
- if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
+ if ((err = pcmcia_map_mem_page(link, link->win, 0)))
goto config_error;
/* Setup the CCRs; there are no infos in the CIS about the Ethernet
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d241b4a..d47672c 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -207,16 +207,14 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
*/
if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- memreq_t map;
req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
req->Base = mem->win[0].host_addr;
req->Size = mem->win[0].len;
req->AccessSpeed = 0;
if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
+ if (pcmcia_map_mem_page(p_dev, p_dev->win,
+ mem->win[0].card_addr) != 0)
return -ENODEV;
}
/* If we got this far, we're cool! */
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 7c9af82..ffe1f89 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -64,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
{
struct ssb_bus *ssb;
win_req_t win;
- memreq_t mem;
int err = -ENOMEM;
int res = 0;
@@ -87,9 +86,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != 0)
goto err_kfree_ssb;
- mem.CardOffset = 0;
- mem.Page = 0;
- res = pcmcia_map_mem_page(dev, dev->win, &mem);
+ res = pcmcia_map_mem_page(dev, dev->win, 0);
if (res != 0)
goto err_disable;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b83d5ef..7eb339a 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -393,7 +393,6 @@ static int ray_config(struct pcmcia_device *link)
int ret = 0;
int i;
win_req_t req;
- memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
@@ -430,9 +429,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &link->win);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ ret = pcmcia_map_mem_page(link, link->win, 0);
if (ret)
goto failed;
local->sram = ioremap(req.Base, req.Size);
@@ -446,9 +443,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &local->rmem_handle);
if (ret)
goto failed;
- mem.CardOffset = 0x8000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
if (ret)
goto failed;
local->rmem = ioremap(req.Base, req.Size);
@@ -462,9 +457,7 @@ static int ray_config(struct pcmcia_device *link)
ret = pcmcia_request_window(link, &req, &local->amem_handle);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
if (ret)
goto failed;
local->amem = ioremap(req.Base, req.Size);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index a48d4a9..975baaa 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -193,7 +193,7 @@ EXPORT_SYMBOL(pcmcia_write_config_byte);
int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
- memreq_t *req)
+ unsigned int offset)
{
struct pcmcia_socket *s = p_dev->socket;
int ret;
@@ -201,12 +201,9 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
wh--;
if (wh >= MAX_WIN)
return -EINVAL;
- if (req->Page != 0) {
- dev_dbg(&s->dev, "failure: requested page is zero\n");
- return -EINVAL;
- }
+
mutex_lock(&s->ops_mutex);
- s->win[wh].card_start = req->CardOffset;
+ s->win[wh].card_start = offset;
ret = s->ops->set_mem_map(s, &s->win[wh]);
if (ret)
dev_warn(&s->dev, "failed to set_mem_map\n");
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index ad8e896..5688fc3 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1661,7 +1661,6 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
}
if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- memreq_t map;
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
@@ -1673,8 +1672,8 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
cfg_mem->req.AccessSpeed = 0;
if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0)
goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
+ if (pcmcia_map_mem_page(p_dev, p_dev->win,
+ mem->win[0].card_addr) != 0)
goto next_entry;
cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size);
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 7e41ad9..abaa40b 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -556,7 +556,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
win_req_t *req = priv_data;
- memreq_t map;
if (cfg->index == 0)
return -ENODEV;
@@ -602,9 +601,8 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
req->AccessSpeed = 0;
if (pcmcia_request_window(p_dev, req, &p_dev->win))
return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
+ if (pcmcia_map_mem_page(p_dev, p_dev->win,
+ mem->win[0].card_addr))
return -ENODEV;
}
/* If we got this far, we're cool! */
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index b2483f8..caccece 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -308,7 +308,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
win_req_t *req = priv_data;
- memreq_t map;
if (cfg->index == 0)
return -ENODEV;
@@ -354,9 +353,8 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
req->AccessSpeed = 0;
if (pcmcia_request_window(p_dev, req, &p_dev->win))
return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
+ if (pcmcia_map_mem_page(p_dev, p_dev->win,
+ mem->win[0].card_addr))
return -ENODEV;
}
/* If we got this far, we're cool! */
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index c1444b4..94d9f7f 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -286,7 +286,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
win_req_t *req = priv_data;
- memreq_t map;
if (cfg->index == 0)
return -ENODEV;
@@ -332,9 +331,8 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
req->AccessSpeed = 0;
if (pcmcia_request_window(p_dev, req, &p_dev->win))
return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
+ if (pcmcia_map_mem_page(p_dev, p_dev->win,
+ mem->win[0].card_addr))
return -ENODEV;
}
/* If we got this far, we're cool! */
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 583a4e3..e4faf44 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -68,12 +68,6 @@ typedef struct config_req_t {
#define PRESENT_IOBASE_3 0x100
#define PRESENT_IOSIZE 0x200
-/* For GetMemPage, MapMemPage */
-typedef struct memreq_t {
- u_int CardOffset;
- u_short Page;
-} memreq_t;
-
/* For RequestWindow */
typedef struct win_req_t {
u_int Attributes;
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 0748bec..a2bf3a7 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -202,7 +202,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req,
window_handle_t *wh);
int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t win);
int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win,
- memreq_t *req);
+ unsigned int offset);
int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
void pcmcia_disable_device(struct pcmcia_device *p_dev);
--
1.7.0.4
^ permalink raw reply related
* [PATCH 11/11] pcmcia: do not request windows if you don't need to
From: Dominik Brodowski @ 2010-08-01 12:59 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, netdev, linux-wireless
In-Reply-To: <20100801125749.GA2564@comet.dominikbrodowski.net>
Several drivers contained dummy code to request for memory windows,
even though they never made use of it. Remove all such code
snippets.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/isdn/hisax/sedlbauer_cs.c | 37 +------------------------
drivers/net/wireless/airo_cs.c | 37 +------------------------
drivers/staging/comedi/drivers/ni_daq_700.c | 23 +---------------
drivers/staging/comedi/drivers/ni_daq_dio24.c | 24 +---------------
drivers/staging/comedi/drivers/ni_labpc_cs.c | 24 +---------------
5 files changed, 5 insertions(+), 140 deletions(-)
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 0b06dbb..a024192 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -171,8 +171,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -219,31 +217,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
}
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req->Attributes |= WIN_ENABLE;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
- return -ENODEV;
-
- if (pcmcia_map_mem_page(p_dev, p_dev->win,
- mem->win[0].card_addr) != 0)
- return -ENODEV;
- }
return 0;
}
@@ -251,16 +224,11 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
- win_req_t *req;
int ret;
IsdnCard_t icard;
dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
- req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
- if (!req)
- return -ENOMEM;
-
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
@@ -273,7 +241,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+ ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
if (ret)
goto failed;
@@ -297,9 +265,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
printk(" & %pR", link->resource[0]);
if (link->resource[1])
printk(" & %pR", link->resource[1]);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req->Base,
- req->Base+req->Size-1);
printk("\n");
icard.para[0] = link->irq;
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d47672c..9a121a5 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -154,8 +154,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -194,29 +192,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
- return -ENODEV;
- if (pcmcia_map_mem_page(p_dev, p_dev->win,
- mem->win[0].card_addr) != 0)
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
@@ -225,17 +200,12 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
- win_req_t *req;
int ret;
dev = link->priv;
dev_dbg(&link->dev, "airo_config\n");
- req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
- if (!req)
- return -ENOMEM;
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -250,7 +220,7 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
if (ret)
goto failed;
@@ -281,16 +251,11 @@ static int airo_config(struct pcmcia_device *link)
printk(" & %pR", link->resource[0]);
if (link->resource[1])
printk(" & %pR", link->resource[1]);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req->Base,
- req->Base+req->Size-1);
printk("\n");
- kfree(req);
return 0;
failed:
airo_release(link);
- kfree(req);
return -ENODEV;
} /* airo_config */
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index abaa40b..bf2e84a 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -555,8 +555,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -589,22 +587,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
}
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
- req->Attributes |= WIN_ENABLE;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- if (req->Size < 0x1000)
- req->Size = 0x1000;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win))
- return -ENODEV;
- if (pcmcia_map_mem_page(p_dev, p_dev->win,
- mem->win[0].card_addr))
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
@@ -618,7 +600,7 @@ static void dio700_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "dio700_config\n");
- ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, &req);
+ ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
@@ -644,9 +626,6 @@ static void dio700_config(struct pcmcia_device *link)
printk(", io %pR", link->resource[0]);
if (link->resource[1])
printk(" & %pR", link->resource[1]);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base + req.Size - 1);
printk("\n");
return;
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index caccece..9112e70 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -307,8 +307,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -341,22 +339,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
}
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
- req->Attributes |= WIN_ENABLE;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- if (req->Size < 0x1000)
- req->Size = 0x1000;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win))
- return -ENODEV;
- if (pcmcia_map_mem_page(p_dev, p_dev->win,
- mem->win[0].card_addr))
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
@@ -364,13 +346,12 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
static void dio24_config(struct pcmcia_device *link)
{
int ret;
- win_req_t req;
printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
dev_dbg(&link->dev, "dio24_config\n");
- ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req);
+ ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
@@ -396,9 +377,6 @@ static void dio24_config(struct pcmcia_device *link)
printk(" & %pR", link->resource[0]);
if (link->resource[1])
printk(" & %pR", link->resource[1]);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base + req.Size - 1);
printk("\n");
return;
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 94d9f7f..f204961 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -285,8 +285,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -319,22 +317,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
}
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
- req->Attributes |= WIN_ENABLE;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- if (req->Size < 0x1000)
- req->Size = 0x1000;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win))
- return -ENODEV;
- if (pcmcia_map_mem_page(p_dev, p_dev->win,
- mem->win[0].card_addr))
- return -ENODEV;
- }
/* If we got this far, we're cool! */
return 0;
}
@@ -343,11 +325,10 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
static void labpc_config(struct pcmcia_device *link)
{
int ret;
- win_req_t req;
dev_dbg(&link->dev, "labpc_config\n");
- ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, &req);
+ ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
@@ -373,9 +354,6 @@ static void labpc_config(struct pcmcia_device *link)
printk(" & %pR", link->resource[0]);
if (link->resource[1])
printk(" & %pR", link->resource[1]);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base + req.Size - 1);
printk("\n");
return;
--
1.7.0.4
^ permalink raw reply related
* [PATCH 05/11] pcmcia: do not use io_req_t when calling pcmcia_request_io()
From: Dominik Brodowski @ 2010-08-01 12:59 UTC (permalink / raw)
To: linux-pcmcia-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Dominik Brodowski, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, laforge-TgoAw6mPHtdg9hUCZPvPmw,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
linux-serial-u79uwXL29TY76Z2rM5mHXA, Michael Buesch
In-Reply-To: <20100801125749.GA2564-S7uyTPAaJ/sb6pqDj42GsMgv3T4z79SOrE5yTffgRl4@public.gmane.org>
Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.
CC: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: laforge-TgoAw6mPHtdg9hUCZPvPmw@public.gmane.org
CC: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
CC: linux-bluetooth-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
CC: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: Michael Buesch <mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
---
Documentation/pcmcia/driver-changes.txt | 7 ++++
drivers/ata/pata_pcmcia.c | 29 ++++++++-------
drivers/bluetooth/bluecard_cs.c | 13 +++----
drivers/bluetooth/bt3c_cs.c | 18 +++++-----
drivers/bluetooth/btuart_cs.c | 18 +++++-----
drivers/bluetooth/dtl1_cs.c | 21 +++++------
drivers/char/pcmcia/cm4000_cs.c | 17 +++------
drivers/char/pcmcia/cm4040_cs.c | 20 +++-------
drivers/char/pcmcia/ipwireless/main.c | 10 +++---
drivers/char/pcmcia/synclink_cs.c | 21 +++++------
drivers/ide/ide-cs.c | 30 ++++++++-------
drivers/isdn/hardware/avm/avm_cs.c | 15 +++-----
drivers/isdn/hisax/avma1_cs.c | 20 ++++------
drivers/isdn/hisax/elsa_cs.c | 15 ++++----
drivers/isdn/hisax/sedlbauer_cs.c | 28 +++++++--------
drivers/isdn/hisax/teles_cs.c | 15 ++++----
drivers/net/pcmcia/3c574_cs.c | 11 +++---
drivers/net/pcmcia/3c589_cs.c | 11 +++---
drivers/net/pcmcia/axnet_cs.c | 40 +++++++++++----------
drivers/net/pcmcia/com20020_cs.c | 19 ++++++----
drivers/net/pcmcia/fmvj18x_cs.c | 31 ++++++++--------
drivers/net/pcmcia/ibmtr_cs.c | 14 ++++----
drivers/net/pcmcia/nmclan_cs.c | 8 ++--
drivers/net/pcmcia/pcnet_cs.c | 40 +++++++++++----------
drivers/net/pcmcia/smc91c92_cs.c | 43 +++++++++++-----------
drivers/net/pcmcia/xirc2ps_cs.c | 34 +++++++++---------
drivers/net/wireless/airo_cs.c | 22 +++++------
drivers/net/wireless/atmel_cs.c | 22 +++++------
drivers/net/wireless/b43/pcmcia.c | 4 --
drivers/net/wireless/hostap/hostap_cs.c | 28 ++++++---------
drivers/net/wireless/libertas/if_cs.c | 8 ++--
drivers/net/wireless/orinoco/orinoco_cs.c | 24 ++++++-------
drivers/net/wireless/orinoco/spectrum_cs.c | 24 ++++++-------
drivers/net/wireless/ray_cs.c | 5 +--
drivers/net/wireless/wl3501_cs.c | 12 +++---
drivers/parport/parport_cs.c | 16 ++++----
drivers/pcmcia/pcmcia_resource.c | 37 +++++--------------
drivers/scsi/pcmcia/aha152x_stub.c | 14 ++++----
drivers/scsi/pcmcia/fdomain_stub.c | 10 +++---
drivers/scsi/pcmcia/nsp_cs.c | 30 +++++++--------
drivers/scsi/pcmcia/qlogic_stub.c | 14 ++++----
drivers/scsi/pcmcia/sym53c500_cs.c | 14 ++++----
drivers/serial/serial_cs.c | 37 ++++++++++---------
drivers/staging/comedi/drivers/cb_das16_cs.c | 24 ++++++-------
drivers/staging/comedi/drivers/das08_cs.c | 23 ++++++------
drivers/staging/comedi/drivers/ni_daq_700.c | 24 ++++++-------
drivers/staging/comedi/drivers/ni_daq_dio24.c | 24 ++++++-------
drivers/staging/comedi/drivers/ni_labpc_cs.c | 24 ++++++-------
drivers/staging/comedi/drivers/ni_mio_cs.c | 13 +++----
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 24 ++++++-------
drivers/staging/wlags49_h2/wl_cs.c | 8 ++--
drivers/telephony/ixj_pcmcia.c | 16 ++++----
drivers/usb/host/sl811_cs.c | 12 +++---
include/pcmcia/cs.h | 17 ---------
include/pcmcia/ds.h | 21 ++++++++++-
sound/pcmcia/pdaudiocf/pdaudiocf.c | 6 ++--
sound/pcmcia/vx/vxpocket.c | 6 ++--
57 files changed, 527 insertions(+), 584 deletions(-)
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index ff5f0be..26c0f9c 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,4 +1,11 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_request_io changes (as of 2.6.36)
+ Instead of io_req_t, drivers are now requested to fill out
+ struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+ ranges. After a call to pcmcia_request_io(), the ports found there
+ are reserved, after calling pcmcia_request_configuration(), they may
+ be used.
+
* No dev_info_t, no cs_types.h (as of 2.6.36)
dev_info_t and a few other typedefs are removed. No longer use them
in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 1fcd065..e944aa0 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -200,21 +200,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ pdev->resource[0]->start = io->win[0].base;
+ if (!(io->flags & CISTPL_IO_16BIT)) {
+ pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ }
if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = 8;
+ pdev->resource[1]->start = io->win[1].base;
+ pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[1]->start;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = io->win[0].len;
+ pdev->resource[1]->end = 0;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[0]->start + 0x0e;
} else
@@ -245,9 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
struct ata_port_operations *ops = &pcmcia_port_ops;
/* Set up attributes in order to probe card and get resources */
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- pdev->io.IOAddrLines = 3;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 24d2007..d52e90a 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -865,9 +865,6 @@ static int bluecard_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
-
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -890,12 +887,14 @@ static int bluecard_config(struct pcmcia_device *link)
int i, n;
link->conf.ConfigIndex = 0x20;
- link->io.NumPorts1 = 64;
- link->io.IOAddrLines = 6;
+
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 64;
+ link->io_lines = 6;
for (n = 0; n < 0x400; n += 0x40) {
- link->io.BasePort1 = n ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = n ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 8ab494c..7ab8f29 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -657,8 +657,8 @@ static int bt3c_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -683,14 +683,14 @@ static int bt3c_check_config(struct pcmcia_device *p_dev,
{
unsigned long try = (unsigned long) priv_data;
+ p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = (try == 0) ? 16 :
- cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -707,9 +707,9 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 7e770d4..1c4f5e8 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -586,8 +586,8 @@ static int btuart_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -612,14 +612,14 @@ static int btuart_check_config(struct pcmcia_device *p_dev,
{
int *try = priv_data;
+ p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = (*try == 0) ? 16 :
- cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -636,9 +636,9 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index bfe9313..18ecc57 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -572,8 +572,8 @@ static int dtl1_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -597,14 +597,13 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
- return 0;
- }
- return -ENODEV;
+ if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8))
+ return -ENODEV;
+
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[0]->end = cf->io.win[0].len; /*yo */
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev);
}
static int dtl1_config(struct pcmcia_device *link)
@@ -613,7 +612,7 @@ static int dtl1_config(struct pcmcia_device *link)
int i;
/* Look for a generic full-sized window */
- link->io.NumPorts1 = 8;
+ link->resource[0]->end = 8;
if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
goto failed;
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 18484ed..ec73d9f 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1751,17 +1751,12 @@ static int cm4000_config_check(struct pcmcia_device *p_dev,
if (!cfg->io.nwin)
return -ENODEV;
- /* Get the IOaddr */
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(cfg->io.flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(cfg->io.flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev);
}
static int cm4000_config(struct pcmcia_device * link, int devno)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index a6bbf19..815cde1 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -527,16 +527,12 @@ static int cm4040_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
/* Get the IOaddr */
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(cfg->io.flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(cfg->io.flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
- rc = pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+ rc = pcmcia_request_io(p_dev);
+
dev_printk(KERN_INFO, &p_dev->dev,
"pcmcia_request_io returned 0x%x\n", rc);
return rc;
@@ -548,10 +544,6 @@ static int reader_config(struct pcmcia_device *link, int devno)
struct reader_dev *dev;
int fail_rc;
- link->io.BasePort2 = 0;
- link->io.NumPorts2 = 0;
- link->io.Attributes2 = 0;
-
if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 9467994..5f87b9f 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -88,15 +88,15 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
memreq_t memreq_common_memory;
int ret;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.IOAddrLines = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
/* 0x40 causes it to generate level mode interrupts. */
/* 0x04 enables IREQ pin. */
p_dev->conf.ConfigIndex = cfg->index | 0x44;
- ret = pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->io_lines = 16;
+ ret = pcmcia_request_io(p_dev);
if (ret)
return ret;
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 8ded9b0..9ecd6be 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -571,18 +571,15 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- if (cfg->io.nwin > 0) {
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(cfg->io.flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(cfg->io.flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- return pcmcia_request_io(p_dev, &p_dev->io);
- }
- return -ENODEV;
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev);
}
static int mgslpc_config(struct pcmcia_device *link)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 34eafaf..c1a16f3 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -97,9 +97,8 @@ static int ide_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = 3;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -228,22 +227,25 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+
pdev->conf.ConfigIndex = cfg->index;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ pdev->resource[0]->start = io->win[0].base;
+ if (!(io->flags & CISTPL_IO_16BIT)) {
+ pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ }
if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = 8;
+ pdev->resource[1]->start = io->win[1].base;
+ pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[1]->start;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ pdev->resource[0]->end = io->win[0].len;
+ pdev->resource[1]->end = 0;
+ if (pcmcia_request_io(pdev) != 0)
return -ENODEV;
stk->ctl_base = pdev->resource[1]->start + 0x0e;
} else
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 7c8c51f..09b1795 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -75,9 +75,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
{
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -119,13 +118,9 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
if (cf->io.nwin <= 0)
return -ENODEV;
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.NumPorts1 = cf->io.win[0].len;
- p_dev->io.NumPorts2 = 0;
- printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
- p_dev->io.BasePort1,
- p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[0]->end = cf->io.win[0].len;
+ return pcmcia_request_io(p_dev);
}
static int avmcs_config(struct pcmcia_device *link)
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 8889963..94263c2 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -78,11 +78,10 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts2 = 16;
- p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[1]->end = 16;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -126,13 +125,10 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
if (cf->io.nwin <= 0)
return -ENODEV;
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.NumPorts1 = cf->io.win[0].len;
- p_dev->io.NumPorts2 = 0;
- printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
- p_dev->io.BasePort1,
- p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[0]->end = cf->io.win[0].len;
+ p_dev->io_lines = 5;
+ return pcmcia_request_io(p_dev);
}
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index c10bfd3..b3c08aa 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -126,9 +126,8 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
and attributes of IO windows) are fixed by the nature of the
device, and can be hard-wired here.
*/
- link->io.NumPorts1 = 8;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 3;
+ link->resource[0]->end = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -173,16 +172,18 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
{
int j;
+ p_dev->io_lines = 3;
+
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
- p_dev->io.BasePort1 = cf->io.win[0].base;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
for (j = 0x2f0; j > 0x100; j -= 0x10) {
- p_dev->io.BasePort1 = j;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = j;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index cecb35a..4755eb4 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -129,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
/* from old sedl_cs
*/
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 8;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = 3;
+ link->resource[0]->end = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -201,23 +200,22 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ p_dev->io_lines = 3;
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 3787fc7..7296102 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -106,9 +106,8 @@ static int __devinit teles_probe(struct pcmcia_device *link)
and attributes of IO windows) are fixed by the nature of the
device, and can be hard-wired here.
*/
- link->io.NumPorts1 = 96;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 96;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -153,16 +152,18 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev,
{
int j;
+ p_dev->io_lines = 5;
+
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
- p_dev->io.BasePort1 = cf->io.win[0].base;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
} else {
printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
for (j = 0x2f0; j > 0x100; j -= 0x10) {
- p_dev->io.BasePort1 = j;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = j;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index b5ea9b8..c683f77 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -278,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link)
lp->p_dev = link;
spin_lock_init(&lp->window_lock);
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -337,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "3c574_config()\n");
- link->io.IOAddrLines = 16;
+ link->io_lines = 16;
+
for (i = j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 122ef4a..61f9cf2 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link)
lp->p_dev = link;
spin_lock_init(&lp->lock);
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link)
"3Com card??\n");
multi = (link->card_id == PRODID_3COM_3C562);
+ link->io_lines = 16;
+
/* For the 3c562, the base address must be xx00-xx7f */
- link->io.IOAddrLines = 16;
for (i = j = 0; j < 0x400; j += 0x10) {
if (multi && (j & 0x80)) continue;
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index c52fdf3..5f05ffb 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -259,28 +259,30 @@ static int get_prom(struct pcmcia_device *link)
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
- if (link->io.NumPorts1 == 32) {
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ if (link->resource[0]->end == 32) {
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* for master/slave multifunction cards */
- if (link->io.NumPorts2 > 0)
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->end > 0)
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
} else {
/* This should be two 16-port windows */
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
}
- if (link->io.BasePort1 == 0) {
- link->io.IOAddrLines = 16;
+ if (link->resource[0]->start == 0) {
for (j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- link->io.BasePort2 = (j ^ 0x300) + 0x10;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ link->resource[1]->start = (j ^ 0x300) + 0x10;
+ link->io_lines = 16;
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
return ret;
} else {
- return pcmcia_request_io(link, &link->io);
+ return pcmcia_request_io(link);
}
}
@@ -301,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev,
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
i = (io->win[1].len > io->win[0].len);
- p_dev->io.BasePort2 = io->win[1-i].base;
- p_dev->io.NumPorts2 = io->win[1-i].len;
+ p_dev->resource[1]->start = io->win[1-i].base;
+ p_dev->resource[1]->end = io->win[1-i].len;
} else {
- i = p_dev->io.NumPorts2 = 0;
+ i = p_dev->resource[1]->end = 0;
}
- p_dev->io.BasePort1 = io->win[i].base;
- p_dev->io.NumPorts1 = io->win[i].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ p_dev->resource[0]->start = io->win[i].base;
+ p_dev->resource[0]->end = io->win[i].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
return -ENODEV;
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 3b53818..3c400cf 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev)
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.NumPorts1 = 16;
- p_dev->io.IOAddrLines = 16;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "com20020_config\n");
- dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
+ dev_dbg(&link->dev, "baseport1 is %Xh\n",
+ (unsigned int) link->resource[0]->start);
+
i = -ENODEV;
- if (!link->io.BasePort1)
+ link->io_lines = 16;
+
+ if (!link->resource[0]->start)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
- link->io.BasePort1 = ioaddr;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = ioaddr;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
}
else
- i = pcmcia_request_io(link, &link->io);
+ i = pcmcia_request_io(link);
if (i != 0)
{
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index bba6369..6993044 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -248,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link)
lp->base = NULL;
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -288,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link)
{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
for (i = 0; i < 5; i++) {
- link->io.BasePort2 = serial_base[i];
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- if (link->io.BasePort2 == 0) {
- link->io.NumPorts2 = 0;
+ link->resource[1]->start = serial_base[i];
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->start == 0) {
+ link->resource[1]->end = 0;
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
@@ -310,8 +309,8 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
0x380,0x3c0 only for ioport.
*/
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
- link->io.BasePort1 = ioaddr;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = ioaddr;
+ ret = pcmcia_request_io(link);
if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
@@ -345,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "fmvj18x_config\n");
+ link->io_lines = 5;
+
len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
kfree(buf);
@@ -363,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link)
/* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
}
break;
case MANFID_NEC:
cardtype = NEC; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
break;
case MANFID_KME:
cardtype = KME; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
- link->io.NumPorts2 = 8;
+ link->resource[1]->end = 8;
break;
case MANFID_CONTEC:
cardtype = CONTEC;
@@ -417,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
}
}
- if (link->io.NumPorts2 != 0) {
+ if (link->resource[1]->end != 0) {
ret = mfc_try_io_port(link);
if (ret != 0) goto failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
if (ret != 0) goto failed;
} else {
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
}
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index e99abaa..3fd8595 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -151,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
link->priv = info;
info->ti = netdev_priv(dev);
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 4;
- link->io.IOAddrLines = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 4;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -218,16 +217,17 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "ibmtr_config\n");
link->conf.ConfigIndex = 0x61;
+ link->io_lines = 16;
/* Determine if this is PRIMARY or ALTERNATE. */
/* Try PRIMARY card at 0xA20-0xA23 */
- link->io.BasePort1 = 0xA20;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = 0xA20;
+ i = pcmcia_request_io(link);
if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
- link->io.BasePort1 = 0xA24;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = 0xA24;
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
}
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 9980cbb..68f2dee 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -458,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link)
link->priv = dev;
spin_lock_init(&lp->bank_lock);
- link->io.NumPorts1 = 32;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 5;
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@@ -644,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "nmclan_config\n");
- ret = pcmcia_request_io(link, &link->io);
+ link->io_lines = 5;
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index c9cd237..9c5fc9d 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -477,29 +477,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
- if (link->io.NumPorts1 == 32) {
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (link->io.NumPorts2 > 0) {
+ link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ if (link->resource[0]->end == 32) {
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ if (link->resource[1]->end > 0) {
/* for master/slave multifunction cards */
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
}
} else {
/* This should be two 16-port windows */
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
}
- if (link->io.BasePort1 == 0) {
- link->io.IOAddrLines = 16;
+ if (link->resource[0]->start == 0) {
for (j = 0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- link->io.BasePort2 = (j ^ 0x300) + 0x10;
- ret = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j ^ 0x300;
+ link->resource[1]->start = (j ^ 0x300) + 0x10;
+ link->io_lines = 16;
+ ret = pcmcia_request_io(link);
if (ret == 0)
return ret;
}
return ret;
} else {
- return pcmcia_request_io(link, &link->io);
+ return pcmcia_request_io(link);
}
}
@@ -520,18 +522,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
i = (io->win[1].len > io->win[0].len);
- p_dev->io.BasePort2 = io->win[1-i].base;
- p_dev->io.NumPorts2 = io->win[1-i].len;
+ p_dev->resource[1]->start = io->win[1-i].base;
+ p_dev->resource[1]->end = io->win[1-i].len;
} else {
- i = p_dev->io.NumPorts2 = 0;
+ i = p_dev->resource[1]->end = 0;
}
*has_shmem = ((cfg->mem.nwin == 1) &&
(cfg->mem.win[0].len >= 0x4000));
- p_dev->io.BasePort1 = io->win[i].base;
- p_dev->io.NumPorts1 = io->win[i].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ p_dev->resource[0]->start = io->win[i].base;
+ p_dev->resource[0]->end = io->win[i].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
return 0;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 1b0b323..a5e4779 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -324,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link)
link->priv = dev;
spin_lock_init(&smc->lock);
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 4;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -427,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
void *priv_data)
{
int k;
- p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->resource[1]->start = cf->io.win[0].base;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80)
continue;
- p_dev->io.BasePort1 = k ^ 0x300;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = k ^ 0x300;
+ p_dev->io_lines = 16;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -448,9 +448,8 @@ static int mhz_mfc_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->io.IOAddrLines = 16;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts2 = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
@@ -601,9 +600,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev);
}
static int smc_config(struct pcmcia_device *link)
@@ -611,7 +610,7 @@ static int smc_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
int i;
- link->io.NumPorts1 = 16;
+ link->resource[0]->end = 16;
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
dev->base_addr = link->resource[0]->start;
@@ -646,25 +645,25 @@ static int osi_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
- link->io.NumPorts1 = 64;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts2 = 8;
- link->io.IOAddrLines = 16;
+ link->resource[0]->end = 64;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
/* Enable Hard Decode, LAN, Modem */
link->conf.ConfigIndex = 0x23;
+ link->io_lines = 16;
for (i = j = 0; j < 4; j++) {
- link->io.BasePort2 = com[j];
- i = pcmcia_request_io(link, &link->io);
+ link->resource[1]->start = com[j];
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
if (i != 0) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
- link->io.NumPorts2 = 0;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[1]->end = 0;
+ i = pcmcia_request_io(link);
}
dev->base_addr = link->resource[0]->start + 0x10;
return i;
@@ -803,7 +802,7 @@ static int check_sig(struct pcmcia_device *link)
}
/* Try setting bus width */
- width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
+ width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
s = inb(ioaddr + CONFIG);
if (width)
s |= CFG_16BIT;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 1577b00..e051d3a 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -677,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = ioaddr;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = ioaddr;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -696,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
int *pass = priv_data;
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->io.BasePort2 = cf->io.win[0].base;
- p_dev->io.BasePort1 = p_dev->io.BasePort2
+ p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->resource[0]->start = p_dev->resource[1]->start
+ (*pass ? (cf->index & 0x20 ? -24:8)
: (cf->index & 0x20 ? 8:-24));
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
@@ -807,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link)
goto failure;
}
- link->io.IOAddrLines =10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
if (local->modem) {
int pass;
@@ -816,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status |= CCSR_AUDIO_ENA;
}
- link->io.NumPorts2 = 8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->end = 8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
- link->io.NumPorts1 = 16; /* no Mako stuff anymore */
+ link->resource[0]->end = 16; /* no Mako stuff anymore */
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
goto port_found;
} else {
- link->io.NumPorts1 = 18;
+ link->resource[0]->end = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* the second tries again, thereby considering that the 32 ports are
* mirrored every 32 bytes. Actually we use a mirrored port for
@@ -840,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link)
}
printk(KNOT_XIRC "no ports available\n");
} else {
- link->io.NumPorts1 = 16;
+ link->io_lines = 10;
+ link->resource[0]->end = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = ioaddr;
+ if (!(err = pcmcia_request_io(link)))
goto port_found;
}
- link->io.BasePort1 = 0; /* let CS decide */
- if ((err=pcmcia_request_io(link, &link->io)))
+ link->resource[0]->start = 0; /* let CS decide */
+ if ((err = pcmcia_request_io(link)))
goto config_error;
}
port_found:
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index b7e7f50..d241b4a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -175,25 +175,23 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
/*
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 65b3aed..3b63216 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -190,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int atmel_config(struct pcmcia_device *link)
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index f71bc78..7c9af82 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -77,10 +77,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.Attributes = CONF_ENABLE_IRQ;
dev->conf.IntType = INT_MEMORY_AND_IO;
- dev->io.BasePort2 = 0;
- dev->io.NumPorts2 = 0;
- dev->io.Attributes2 = 0;
-
win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 6db7fd1..04edfa9 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -519,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
"dflt->io.nwin=%d\n",
cfg->io.nwin, dflt->io.nwin);
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int prism2_config(struct pcmcia_device *link)
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index be4c475..9c29839 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -801,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
@@ -815,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int if_cs_probe(struct pcmcia_device *p_dev)
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 6d514b5..ef46a2d 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -191,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 4f8f55e..873877e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -253,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
return 0;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 165beb6..b83d5ef 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -315,9 +315,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
local->finder = p_dev;
/* The io structure describes IO port mapping. None used here */
- p_dev->io.NumPorts1 = 0;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 0;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index a32f220..a1cc2d4 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
struct wl3501_card *this;
/* The io structure describes IO port mapping */
- p_dev->io.NumPorts1 = 16;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
/* Try allocating IO ports. This tries a few fixed addresses. If you
* want, you can also read the card's config table to pick addresses --
* see the serial driver for an example. */
+ link->io_lines = 5;
for (j = 0x280; j < 0x400; j += 0x20) {
/* The '^0x300' is so that we probe 0x300-0x3ff first, then
* 0x200-0x2ff, and so on, because this seems safer */
- link->io.BasePort1 = j;
- link->io.BasePort2 = link->io.BasePort1 + 0x10;
- i = pcmcia_request_io(link, &link->io);
+ link->resource[0]->start = j;
+ link->resource[1]->start = link->resource[0]->start + 0x10;
+ i = pcmcia_request_io(link);
if (i == 0)
break;
}
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index fc1639c..23e50f4 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -101,8 +101,8 @@ static int parport_probe(struct pcmcia_device *link)
link->priv = info;
info->p_dev = link;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -143,16 +143,16 @@ static int parport_config_check(struct pcmcia_device *p_dev,
{
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
if (epp_mode)
p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin == 2) {
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
return 0;
}
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index fcd48da..a48d4a9 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -70,7 +70,8 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res,
res->flags |= IORESOURCE_IO;
- dev_dbg(&s->dev, "alloc_io_space request for %pR\n", res);
+ dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n",
+ res, lines);
align = base ? (lines ? 1<<lines : 0) : 1;
if (align && (align < num)) {
@@ -541,38 +542,25 @@ EXPORT_SYMBOL(pcmcia_request_configuration);
* pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices
*
* pcmcia_request_io() attepts to reserve the IO port ranges specified in
- * struct pcmcia_device *p_dev->resource[0] and *p_dev->resource[1]. The
+ * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The
* "start" value is the requested start of the IO port resource; "end"
- * relfects the number of ports requested.
- *
- * If io_req_t is passed, those values are converted automatically.
+ * reflects the number of ports requested. The number of IO lines requested
+ * is specified in &struct pcmcia_device @p_dev->io_lines.
*/
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
+int pcmcia_request_io(struct pcmcia_device *p_dev)
{
struct pcmcia_socket *s = p_dev->socket;
- config_t *c;
+ config_t *c = p_dev->function_config;
int ret = -EINVAL;
- unsigned int lines = req->IOAddrLines;
mutex_lock(&s->ops_mutex);
+ dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "pcmcia_request_io: No card present\n");
goto out;
}
- c = p_dev->function_config;
- if (req) {
- c->io[0].start = req->BasePort1;
- c->io[0].end = req->NumPorts1;
- c->io[0].flags |= req->Attributes1;
- c->io[1].start = req->BasePort2;
- c->io[1].end = req->NumPorts2;
- c->io[1].flags |= req->Attributes2;
- }
-
- dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
-
if (c->state & CONFIG_LOCKED) {
dev_dbg(&s->dev, "Configuration is locked\n");
goto out;
@@ -582,12 +570,12 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
goto out;
}
- ret = alloc_io_space(s, &c->io[0], lines);
+ ret = alloc_io_space(s, &c->io[0], p_dev->io_lines);
if (ret)
goto out;
if (c->io[1].end) {
- ret = alloc_io_space(s, &c->io[1], lines);
+ ret = alloc_io_space(s, &c->io[1], p_dev->io_lines);
if (ret) {
release_io_space(s, &c->io[0]);
goto out;
@@ -598,11 +586,6 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
c->state |= CONFIG_IO_REQ;
p_dev->_io = 1;
- if (!ret) {
- req->BasePort1 = c->io[0].start;
- req->BasePort2 = c->io[1].start;
- }
-
dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR",
&c->io[0], &c->io[1]);
out:
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 3e040f5..61f49bd 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 0x20;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 0x20;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
+ p_dev->io_lines = 10;
/* For New Media T&J, look for a SCSI window */
if (cfg->io.win[0].len >= 0x20)
- p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
else if ((cfg->io.nwin > 1) &&
(cfg->io.win[1].len >= 0x20))
- p_dev->io.BasePort1 = cfg->io.win[1].base;
+ p_dev->resource[0]->start = cfg->io.win[1].base;
if ((cfg->io.nwin > 0) &&
- (p_dev->io.BasePort1 < 0xffff)) {
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ (p_dev->resource[0]->start < 0xffff)) {
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -EINVAL;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 49a9a0a..13dbe5c 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 0x10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 0x10;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->io_lines = 10;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ return pcmcia_request_io(p_dev);
}
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 964c913..ad8e896 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link)
nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 0x10;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10; /* not used */
+ link->resource[0]->end = 0x10;
+ link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags =
+ p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
goto next_entry;
}
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 4e2b83f..eb775f1 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io_lines = 10;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
- if (p_dev->io.BasePort1 == 0)
+ if (p_dev->resource[0]->start == 0)
return -ENODEV;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int qlogic_config(struct pcmcia_device * link)
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index d99c0cb..321e390 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- p_dev->io.BasePort1 = cfg->io.win[0].base;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io_lines = 10;
+ p_dev->resource[0]->start = cfg->io.win[0].base;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
- if (p_dev->io.BasePort1 == 0)
+ if (p_dev->resource[0]->start == 0)
return -ENODEV;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static int
@@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.IOAddrLines = 10;
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index fe7adcd..141c695 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -335,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -424,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Vpp =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ p_dev->io_lines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
&& (cf->io.win[0].base != 0)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -EINVAL;
@@ -446,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
for (j = 0; j < 5; j++) {
- p_dev->io.BasePort1 = base[j];
- p_dev->io.IOAddrLines = base[j] ? 16 : 3;
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ p_dev->resource[0]->start = base[j];
+ p_dev->io_lines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev))
return 0;
}
}
@@ -521,9 +522,9 @@ static int multi_config_check(struct pcmcia_device *p_dev,
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev)) {
*base2 = p_dev->resource[0]->start + 8;
return 0;
}
@@ -540,10 +541,10 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
int *base2 = priv_data;
if (cf->io.nwin == 2) {
- p_dev->io.BasePort1 = cf->io.win[0].base;
- p_dev->io.BasePort2 = cf->io.win[1].base;
- p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ p_dev->resource[0]->start = cf->io.win[0].base;
+ p_dev->resource[1]->start = cf->io.win[1].base;
+ p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev)) {
*base2 = p_dev->resource[1]->start;
return 0;
}
@@ -557,10 +558,10 @@ static int multi_config(struct pcmcia_device *link)
int i, base2 = 0;
/* First, look for a generic full-sized window */
- link->io.NumPorts1 = info->multi * 8;
+ link->resource[0]->end = info->multi * 8;
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
- link->io.NumPorts1 = link->io.NumPorts2 = 8;
+ link->resource[0]->end = link->resource[1]->end = 8;
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 208f1b7..7cf0ccb 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -736,24 +736,22 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
return 0;
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index c4cfcff..9ee677f 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -224,24 +224,23 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
return 0;
}
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 6d56957..7e41ad9 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -571,24 +571,22 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 29e1daf..b2483f8 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -323,24 +323,22 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index fb10987..c1444b4 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -301,24 +301,22 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index f37dc22..d50b6c4 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -264,8 +264,8 @@ static const dev_info_t dev_info = "ni_mio_cs";
static int cs_attach(struct pcmcia_device *link)
{
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->io.NumPorts1 = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -310,13 +310,12 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
{
int base, ret;
- p_dev->io.NumPorts1 = cfg->io.win[0].len;
- p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
- p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = cfg->io.win[0].len;
+ p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
for (base = 0x000; base < 0x400; base += 0x20) {
- p_dev->io.BasePort1 = base;
- ret = pcmcia_request_io(p_dev, &p_dev->io);
+ p_dev->resource[0]->start = base;
+ ret = pcmcia_request_io(p_dev);
if (!ret)
return 0;
}
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 80b8d57..25f4e67 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -1102,26 +1102,24 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
static void daqp_cs_config(struct pcmcia_device *link)
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 2361537..f15afd2 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -145,9 +145,8 @@ static int wl_adapter_attach(struct pcmcia_device *link)
return -ENOMEM;
}
- link->io.NumPorts1 = HCF_NUM_IO_PORTS;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->io.IOAddrLines = 6;
+ link->resource[0]->end = HCF_NUM_IO_PORTS;
+ link->resource[0]->flags = IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
@@ -305,8 +304,9 @@ void wl_adapter_insert( struct pcmcia_device *link )
/* Do we need to allocate an interrupt? */
link->conf.Attributes |= CONF_ENABLE_IRQ;
+ link->io_lines = 6;
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret != 0)
goto failed;
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index a801036..a1900e5 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -32,9 +32,8 @@ static int ixj_probe(struct pcmcia_device *p_dev)
{
dev_dbg(&p_dev->dev, "ixj_attach()\n");
/* Create new ixj device */
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 3;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
if (!p_dev->priv) {
@@ -120,13 +119,14 @@ static int ixj_config_check(struct pcmcia_device *p_dev,
{
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
+ p_dev->io_lines = 3;
if (io->nwin == 2) {
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
- if (!pcmcia_request_io(p_dev, &p_dev->io))
+ if (!pcmcia_request_io(p_dev))
return 0;
}
return -ENODEV;
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 22e04f2..0e13a00 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -162,16 +162,16 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
- return pcmcia_request_io(p_dev, &p_dev->io);
+ return pcmcia_request_io(p_dev);
}
pcmcia_disable_device(p_dev);
return -ENODEV;
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 0cd8c70..ad71bb5 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -56,23 +56,6 @@ typedef struct config_req_t {
#define INT_CARDBUS 0x04
#define INT_ZOOMED_VIDEO 0x08
-/* For RequestIO and ReleaseIO */
-typedef struct io_req_t {
- u_int BasePort1;
- u_int NumPorts1;
- u_int Attributes1;
- u_int BasePort2;
- u_int NumPorts2;
- u_int Attributes2;
- u_int IOAddrLines;
-} io_req_t;
-
-/* Attributes for RequestIO and ReleaseIO */
-#define IO_DATA_PATH_WIDTH 0x18
-#define IO_DATA_PATH_WIDTH_8 0x00
-#define IO_DATA_PATH_WIDTH_16 0x08
-#define IO_DATA_PATH_WIDTH_AUTO 0x10
-
/* Bits in IRQInfo1 field */
#define IRQ_NMI_ID 0x01
#define IRQ_IOCK_ID 0x02
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 3dafd7d..0748bec 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -80,7 +80,6 @@ struct pcmcia_device {
struct list_head socket_device_list;
/* deprecated, will be cleaned up soon */
- io_req_t io;
config_req_t conf;
window_handle_t win;
@@ -88,6 +87,8 @@ struct pcmcia_device {
unsigned int irq;
struct resource *resource[MAX_IO_WIN];
+ unsigned int io_lines; /* number of I/O lines */
+
/* Is the device suspended? */
u16 suspended:1;
@@ -179,7 +180,7 @@ int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val);
int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val);
/* device configuration */
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
+int pcmcia_request_io(struct pcmcia_device *p_dev);
int __must_check
__pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
@@ -206,6 +207,22 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win,
int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
void pcmcia_disable_device(struct pcmcia_device *p_dev);
+/* IO ports */
+#define IO_DATA_PATH_WIDTH 0x18
+#define IO_DATA_PATH_WIDTH_8 0x00
+#define IO_DATA_PATH_WIDTH_16 0x08
+#define IO_DATA_PATH_WIDTH_AUTO 0x10
+
+/* convert flag found in cfgtable to data path width parameter */
+static inline int pcmcia_io_cfg_data_width(unsigned int flags)
+{
+ if (!(flags & CISTPL_IO_8BIT))
+ return IO_DATA_PATH_WIDTH_16;
+ if (!(flags & CISTPL_IO_16BIT))
+ return IO_DATA_PATH_WIDTH_8;
+ return IO_DATA_PATH_WIDTH_AUTO;
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_DS_H */
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 9f897bc..7ab9174 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
pdacf->p_dev = link;
link->priv = pdacf;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.NumPorts1 = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link)
snd_printdd(KERN_DEBUG "pdacf_config called\n");
link->conf.ConfigIndex = 0x5;
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index f23c235..a6edfc3 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -159,8 +159,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
vxp->p_dev = link;
link->priv = chip;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- link->io.NumPorts1 = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+ link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -226,7 +226,7 @@ static int vxpocket_config(struct pcmcia_device *link)
strcpy(chip->card->driver, vxp440_hw.name);
}
- ret = pcmcia_request_io(link, &link->io);
+ ret = pcmcia_request_io(link);
if (ret)
goto failed;
--
1.7.0.4
^ permalink raw reply related
* [PATCH 04/11] pcmcia: do not use io_req_t after call to pcmcia_request_io()
From: Dominik Brodowski @ 2010-08-01 12:59 UTC (permalink / raw)
To: linux-pcmcia-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Dominik Brodowski, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, laforge-TgoAw6mPHtdg9hUCZPvPmw,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-bluetooth-u79uwXL29TY76Z2rM5mHXA,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
linux-serial-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20100801125749.GA2564-S7uyTPAaJ/sb6pqDj42GsMgv3T4z79SOrE5yTffgRl4@public.gmane.org>
After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].
CC: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: laforge-TgoAw6mPHtdg9hUCZPvPmw@public.gmane.org
CC: linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
CC: linux-bluetooth-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
CC: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
---
drivers/ata/pata_pcmcia.c | 8 +++---
drivers/bluetooth/bluecard_cs.c | 18 ++++++++--------
drivers/bluetooth/bt3c_cs.c | 8 +++---
drivers/bluetooth/btuart_cs.c | 12 +++++-----
drivers/bluetooth/dtl1_cs.c | 13 ++++++-----
drivers/char/pcmcia/cm4000_cs.c | 12 +++++-----
drivers/char/pcmcia/cm4040_cs.c | 16 +++++++-------
drivers/char/pcmcia/ipwireless/main.c | 10 +++-----
drivers/char/pcmcia/synclink_cs.c | 7 ++---
drivers/ide/ide-cs.c | 8 +++---
drivers/isdn/hardware/avm/avm_cs.c | 9 ++++---
drivers/isdn/hisax/avma1_cs.c | 8 ++++--
drivers/isdn/hisax/elsa_cs.c | 16 ++++++--------
drivers/isdn/hisax/sedlbauer_cs.c | 16 ++++++--------
drivers/isdn/hisax/teles_cs.c | 14 +++++-------
drivers/net/pcmcia/3c574_cs.c | 2 +-
drivers/net/pcmcia/3c589_cs.c | 2 +-
drivers/net/pcmcia/axnet_cs.c | 4 +-
drivers/net/pcmcia/com20020_cs.c | 2 +-
drivers/net/pcmcia/fmvj18x_cs.c | 6 ++--
drivers/net/pcmcia/ibmtr_cs.c | 2 +-
drivers/net/pcmcia/nmclan_cs.c | 2 +-
drivers/net/pcmcia/pcnet_cs.c | 4 +-
drivers/net/pcmcia/smc91c92_cs.c | 18 ++++++++--------
drivers/net/pcmcia/xirc2ps_cs.c | 12 +++++-----
drivers/net/wireless/airo_cs.c | 12 ++++------
drivers/net/wireless/atmel_cs.c | 2 +-
drivers/net/wireless/hostap/hostap_cs.c | 18 +++++++--------
drivers/net/wireless/libertas/if_cs.c | 7 ++---
drivers/net/wireless/orinoco/orinoco_cs.c | 5 ++-
drivers/net/wireless/orinoco/spectrum_cs.c | 5 ++-
drivers/net/wireless/wl3501_cs.c | 2 +-
drivers/parport/parport_cs.c | 6 +++-
drivers/scsi/pcmcia/aha152x_stub.c | 2 +-
drivers/scsi/pcmcia/fdomain_stub.c | 4 +-
drivers/scsi/pcmcia/nsp_cs.c | 25 ++++++++++-----------
drivers/scsi/pcmcia/qlogic_stub.c | 18 ++++++++--------
drivers/scsi/pcmcia/sym53c500_cs.c | 16 +++++++-------
drivers/serial/serial_cs.c | 22 +++++++++---------
drivers/staging/comedi/drivers/cb_das16_cs.c | 12 ++++------
drivers/staging/comedi/drivers/das08_cs.c | 12 ++++------
drivers/staging/comedi/drivers/ni_daq_700.c | 12 ++++------
drivers/staging/comedi/drivers/ni_daq_dio24.c | 12 ++++------
drivers/staging/comedi/drivers/ni_labpc_cs.c | 12 ++++------
drivers/staging/comedi/drivers/ni_mio_cs.c | 2 +-
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 12 ++++------
drivers/staging/wlags49_h2/wl_cs.c | 2 +-
drivers/telephony/ixj_pcmcia.c | 3 +-
drivers/usb/host/sl811_cs.c | 7 ++---
sound/pcmcia/pdaudiocf/pdaudiocf.c | 3 +-
sound/pcmcia/vx/vxpocket.c | 3 +-
51 files changed, 224 insertions(+), 241 deletions(-)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3dcb2b1..1fcd065 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -210,13 +210,13 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
- stk->ctl_base = pdev->io.BasePort2;
+ stk->ctl_base = pdev->resource[1]->start;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
pdev->io.NumPorts1 = io->win[0].len;
pdev->io.NumPorts2 = 0;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
- stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ stk->ctl_base = pdev->resource[0]->start + 0x0e;
} else
return -ENODEV;
/* If we've got this far, we're done */
@@ -270,7 +270,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
goto failed; /* No suitable config found */
}
- io_base = pdev->io.BasePort1;
+ io_base = pdev->resource[0]->start;
ctl_base = stk->ctl_base;
if (!pdev->irq)
goto failed;
@@ -293,7 +293,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
/* FIXME: Could be more ports at base + 0x10 but we only deal with
one right now */
- if (pdev->io.NumPorts1 >= 0x20)
+ if (resource_size(pdev->resource[0]) >= 0x20)
n_ports = 2;
if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index eb085de..24d2007 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -159,7 +159,7 @@ static void bluecard_detach(struct pcmcia_device *p_dev);
static void bluecard_activity_led_timeout(u_long arg)
{
bluecard_info_t *info = (bluecard_info_t *)arg;
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
return;
@@ -176,7 +176,7 @@ static void bluecard_activity_led_timeout(u_long arg)
static void bluecard_enable_activity_led(bluecard_info_t *info)
{
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
return;
@@ -232,7 +232,7 @@ static void bluecard_write_wakeup(bluecard_info_t *info)
}
do {
- register unsigned int iobase = info->p_dev->io.BasePort1;
+ register unsigned int iobase = info->p_dev->resource[0]->start;
register unsigned int offset;
register unsigned char command;
register unsigned long ready_bit;
@@ -379,7 +379,7 @@ static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
return;
}
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
bluecard_enable_activity_led(info);
@@ -508,7 +508,7 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst)
if (!test_bit(CARD_READY, &(info->hw_state)))
return IRQ_HANDLED;
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
spin_lock(&(info->lock));
@@ -622,7 +622,7 @@ static int bluecard_hci_flush(struct hci_dev *hdev)
static int bluecard_hci_open(struct hci_dev *hdev)
{
bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
@@ -642,7 +642,7 @@ static int bluecard_hci_open(struct hci_dev *hdev)
static int bluecard_hci_close(struct hci_dev *hdev)
{
bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
return 0;
@@ -709,7 +709,7 @@ static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned l
static int bluecard_open(bluecard_info_t *info)
{
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev;
unsigned char id;
@@ -828,7 +828,7 @@ static int bluecard_open(bluecard_info_t *info)
static int bluecard_close(bluecard_info_t *info)
{
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev = info->hdev;
if (!hdev)
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 457b603..8ab494c 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -188,7 +188,7 @@ static void bt3c_write_wakeup(bt3c_info_t *info)
return;
do {
- register unsigned int iobase = info->p_dev->io.BasePort1;
+ register unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
@@ -226,7 +226,7 @@ static void bt3c_receive(bt3c_info_t *info)
return;
}
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
avail = bt3c_read(iobase, 0x7006);
//printk("bt3c_cs: receiving %d bytes\n", avail);
@@ -347,7 +347,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
/* our irq handler is shared */
return IRQ_NONE;
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
spin_lock(&(info->lock));
@@ -480,7 +480,7 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
unsigned int iobase, size, addr, fcs, tmp;
int i, err = 0;
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
/* Reset */
bt3c_io_write(iobase, 0x8040, 0x0404);
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index e7e0a17..7e770d4 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -142,7 +142,7 @@ static void btuart_write_wakeup(btuart_info_t *info)
}
do {
- register unsigned int iobase = info->p_dev->io.BasePort1;
+ register unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
@@ -183,7 +183,7 @@ static void btuart_receive(btuart_info_t *info)
return;
}
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
do {
info->hdev->stat.byte_rx++;
@@ -297,7 +297,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
/* our irq handler is shared */
return IRQ_NONE;
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
spin_lock(&(info->lock));
@@ -354,7 +354,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
return;
}
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
spin_lock_irqsave(&(info->lock), flags);
@@ -478,7 +478,7 @@ static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned lon
static int btuart_open(btuart_info_t *info)
{
unsigned long flags;
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev;
spin_lock_init(&(info->lock));
@@ -548,7 +548,7 @@ static int btuart_open(btuart_info_t *info)
static int btuart_close(btuart_info_t *info)
{
unsigned long flags;
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev = info->hdev;
if (!hdev)
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 7c94aad..bfe9313 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -149,7 +149,7 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
}
do {
- register unsigned int iobase = info->p_dev->io.BasePort1;
+ register unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
@@ -214,7 +214,7 @@ static void dtl1_receive(dtl1_info_t *info)
return;
}
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
do {
info->hdev->stat.byte_rx++;
@@ -301,7 +301,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
/* our irq handler is shared */
return IRQ_NONE;
- iobase = info->p_dev->io.BasePort1;
+ iobase = info->p_dev->resource[0]->start;
spin_lock(&(info->lock));
@@ -461,7 +461,7 @@ static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long
static int dtl1_open(dtl1_info_t *info)
{
unsigned long flags;
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev;
spin_lock_init(&(info->lock));
@@ -508,7 +508,8 @@ static int dtl1_open(dtl1_info_t *info)
outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
- info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI;
+ info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
+ & UART_MSR_RI;
/* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
@@ -533,7 +534,7 @@ static int dtl1_open(dtl1_info_t *info)
static int dtl1_close(dtl1_info_t *info)
{
unsigned long flags;
- unsigned int iobase = info->p_dev->io.BasePort1;
+ unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev = info->hdev;
if (!hdev)
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index a8be2a7..18484ed 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -421,7 +421,7 @@ static struct card_fixup card_fixups[] = {
static void set_cardparameter(struct cm4000_dev *dev)
{
int i;
- unsigned int iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->resource[0]->start;
u_int8_t stopbits = 0x02; /* ISO default */
DEBUGP(3, dev, "-> set_cardparameter\n");
@@ -454,7 +454,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
unsigned short num_bytes_read;
unsigned char pts_reply[4];
ssize_t rc;
- unsigned int iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->resource[0]->start;
rc = 0;
@@ -663,7 +663,7 @@ static void terminate_monitor(struct cm4000_dev *dev)
static void monitor_card(unsigned long p)
{
struct cm4000_dev *dev = (struct cm4000_dev *) p;
- unsigned int iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->resource[0]->start;
unsigned short s;
struct ptsreq ptsreq;
int i, atrc;
@@ -924,7 +924,7 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
loff_t *ppos)
{
struct cm4000_dev *dev = filp->private_data;
- unsigned int iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->resource[0]->start;
ssize_t rc;
int i, j, k;
@@ -1047,7 +1047,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf,
size_t count, loff_t *ppos)
{
struct cm4000_dev *dev = filp->private_data;
- unsigned int iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->resource[0]->start;
unsigned short s;
unsigned char tmp;
unsigned char infolen;
@@ -1400,7 +1400,7 @@ static void stop_monitor(struct cm4000_dev *dev)
static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct cm4000_dev *dev = filp->private_data;
- unsigned int iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->resource[0]->start;
struct inode *inode = filp->f_path.dentry->d_inode;
struct pcmcia_device *link;
int size;
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 44adae9..a6bbf19 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -109,7 +109,7 @@ static inline unsigned char xinb(unsigned short port)
static void cm4040_do_poll(unsigned long dummy)
{
struct reader_dev *dev = (struct reader_dev *) dummy;
- unsigned int obs = xinb(dev->p_dev->io.BasePort1
+ unsigned int obs = xinb(dev->p_dev->resource[0]->start
+ REG_OFFSET_BUFFER_STATUS);
if ((obs & BSR_BULK_IN_FULL)) {
@@ -140,7 +140,7 @@ static void cm4040_stop_poll(struct reader_dev *dev)
static int wait_for_bulk_out_ready(struct reader_dev *dev)
{
int i, rc;
- int iobase = dev->p_dev->io.BasePort1;
+ int iobase = dev->p_dev->resource[0]->start;
for (i = 0; i < POLL_LOOP_COUNT; i++) {
if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
@@ -170,7 +170,7 @@ static int wait_for_bulk_out_ready(struct reader_dev *dev)
/* Write to Sync Control Register */
static int write_sync_reg(unsigned char val, struct reader_dev *dev)
{
- int iobase = dev->p_dev->io.BasePort1;
+ int iobase = dev->p_dev->resource[0]->start;
int rc;
rc = wait_for_bulk_out_ready(dev);
@@ -188,7 +188,7 @@ static int write_sync_reg(unsigned char val, struct reader_dev *dev)
static int wait_for_bulk_in_ready(struct reader_dev *dev)
{
int i, rc;
- int iobase = dev->p_dev->io.BasePort1;
+ int iobase = dev->p_dev->resource[0]->start;
for (i = 0; i < POLL_LOOP_COUNT; i++) {
if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
@@ -218,7 +218,7 @@ static ssize_t cm4040_read(struct file *filp, char __user *buf,
size_t count, loff_t *ppos)
{
struct reader_dev *dev = filp->private_data;
- int iobase = dev->p_dev->io.BasePort1;
+ int iobase = dev->p_dev->resource[0]->start;
size_t bytes_to_read;
unsigned long i;
size_t min_bytes_to_read;
@@ -320,7 +320,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf,
size_t count, loff_t *ppos)
{
struct reader_dev *dev = filp->private_data;
- int iobase = dev->p_dev->io.BasePort1;
+ int iobase = dev->p_dev->resource[0]->start;
ssize_t rc;
int i;
unsigned int bytes_to_write;
@@ -567,8 +567,8 @@ static int reader_config(struct pcmcia_device *link, int devno)
dev = link->priv;
- DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno,
- link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1);
+ DEBUGP(2, dev, "device " DEVICE_NAME "%d at %pR\n", devno,
+ link->resource[0]);
DEBUGP(2, dev, "<- reader_config (succ)\n");
return 0;
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 63c32e3..9467994 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -100,7 +100,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
if (ret)
return ret;
- io_resource = request_region(p_dev->io.BasePort1, p_dev->io.NumPorts1,
+ io_resource = request_region(p_dev->resource[0]->start,
+ resource_size(p_dev->resource[0]),
IPWIRELESS_PCCARD_NAME);
if (cfg->mem.nwin == 0)
@@ -197,7 +198,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
- ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1,
+ ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start,
ipw->attr_memory, ipw->common_memory,
ipw->is_v2_card, signalled_reboot_callback,
ipw);
@@ -209,10 +210,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
ipw->is_v2_card ? "V2/V3" : "V1");
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
- ": I/O ports 0x%04x-0x%04x, irq %d\n",
- (unsigned int) link->io.BasePort1,
- (unsigned int) (link->io.BasePort1 +
- link->io.NumPorts1 - 1),
+ ": I/O ports %pR, irq %d\n", link->resource[0],
(unsigned int) link->irq);
if (ipw->attr_memory && ipw->common_memory)
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 522992e..8ded9b0 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -609,16 +609,15 @@ static int mgslpc_config(struct pcmcia_device *link)
if (ret)
goto failed;
- info->io_base = link->io.BasePort1;
+ info->io_base = link->resource[0]->start;
info->irq_level = link->irq;
dev_info(&link->dev, "index 0x%02x:",
link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
+ if (link->resource[0])
+ printk(", io %pR", link->resource[0]);
printk("\n");
return 0;
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 27dbab8..34eafaf 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -239,13 +239,13 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
- stk->ctl_base = pdev->io.BasePort2;
+ stk->ctl_base = pdev->resource[1]->start;
} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
pdev->io.NumPorts1 = io->win[0].len;
pdev->io.NumPorts2 = 0;
if (pcmcia_request_io(pdev, &pdev->io) != 0)
return -ENODEV;
- stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ stk->ctl_base = pdev->resource[1]->start + 0x0e;
} else
return -ENODEV;
/* If we've got this far, we're done */
@@ -279,7 +279,7 @@ static int ide_config(struct pcmcia_device *link)
if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
goto failed; /* No suitable config found */
}
- io_base = link->io.BasePort1;
+ io_base = link->resource[0]->start;
ctl_base = stk->ctl_base;
if (!link->irq)
@@ -296,7 +296,7 @@ static int ide_config(struct pcmcia_device *link)
outb(0x81, ctl_base+1);
host = idecs_register(io_base, ctl_base, link->irq, link);
- if (host == NULL && link->io.NumPorts1 == 0x20) {
+ if (host == NULL && resource_size(link->resource[0]) == 0x20) {
outb(0x02, ctl_base + 0x10);
host = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq, link);
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index e804a01..7c8c51f 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -191,9 +191,10 @@ static int avmcs_config(struct pcmcia_device *link)
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
- if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) {
- dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
- link->io.BasePort1, link->irq);
+ if ((i = (*addcard)(link->resource[0]->start, link->irq)) < 0) {
+ dev_err(&link->dev,
+ "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
+ (unsigned int) link->resource[0]->start, link->irq);
avmcs_release(link);
return -ENODEV;
}
@@ -211,7 +212,7 @@ static int avmcs_config(struct pcmcia_device *link)
static void avmcs_release(struct pcmcia_device *link)
{
- b1pcmcia_delcard(link->io.BasePort1, link->irq);
+ b1pcmcia_delcard(link->resource[0]->start, link->irq);
pcmcia_disable_device(link);
} /* avmcs_release */
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 49e141e..8889963 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -180,16 +180,18 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
- link->io.BasePort1, link->irq);
+ (unsigned int) link->resource[0]->start, link->irq);
icard.para[0] = link->irq;
- icard.para[1] = link->io.BasePort1;
+ icard.para[1] = link->resource[0]->start;
icard.protocol = isdnprot;
icard.typ = ISDN_CTYPE_A1_PCMCIA;
i = hisax_init_pcmcia(link, &busy, &icard);
if (i < 0) {
- printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
+ printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 "
+ "PCMCIA %d at i/o %#x\n", i,
+ (unsigned int) link->resource[0]->start);
avma1cs_release(link);
return -ENODEV;
}
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 425deea..c10bfd3 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -214,23 +214,21 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
icard.para[0] = link->irq;
- icard.para[1] = link->io.BasePort1;
+ icard.para[1] = link->resource[0]->start;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
if (i < 0) {
- printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n",
- i, link->io.BasePort1);
+ printk(KERN_ERR "elsa_cs: failed to initialize Elsa "
+ "PCMCIA %d with %pR\n", i, link->resource[0]);
elsa_cs_release(link);
} else
((local_info_t*)link->priv)->cardnr = i;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 5dbad96..cecb35a 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -296,27 +296,25 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
if (link->win)
printk(", mem 0x%06lx-0x%06lx", req->Base,
req->Base+req->Size-1);
printk("\n");
icard.para[0] = link->irq;
- icard.para[1] = link->io.BasePort1;
+ icard.para[1] = link->resource[0]->start;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
ret = hisax_init_pcmcia(link,
&(((local_info_t *)link->priv)->stop), &icard);
if (ret < 0) {
- printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
- ret, link->io.BasePort1);
+ printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n",
+ ret, link->resource[0]);
sedlbauer_release(link);
return -ENODEV;
} else
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index d3fb1b7..3787fc7 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -194,23 +194,21 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
icard.para[0] = link->irq;
- icard.para[1] = link->io.BasePort1;
+ icard.para[1] = link->resource[0]->start;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_TELESPCMCIA;
i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
if (i < 0) {
printk(KERN_ERR "teles_cs: failed to initialize Teles PCMCIA %d at i/o %#x\n",
- i, link->io.BasePort1);
+ i, (unsigned int) link->resource[0]->start);
teles_cs_release(link);
return -ENODEV;
}
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index e249b89..b5ea9b8 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -356,7 +356,7 @@ static int tc574_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index b0772df..122ef4a 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -298,7 +298,7 @@ static int tc589_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
EL3WINDOW(0);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index ee0a6d0..c52fdf3 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -332,7 +332,7 @@ static int axnet_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- if (link->io.NumPorts2 == 8) {
+ if (resource_size(link->resource[1]) == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
@@ -342,7 +342,7 @@ static int axnet_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (!get_prom(link)) {
printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n");
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 99957af..3b53818 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -266,7 +266,7 @@ static int com20020_config(struct pcmcia_device *link)
goto failed;
}
- ioaddr = dev->base_addr = link->io.BasePort1;
+ ioaddr = dev->base_addr = link->resource[0]->start;
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
dev_dbg(&link->dev, "request IRQ %d\n",
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 95a991b..bba6369 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -315,7 +315,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
- ((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
+ ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
return ret;
}
}
@@ -436,9 +436,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
- if (link->io.BasePort2 != 0) {
+ if (resource_size(link->resource[1]) != 0) {
ret = fmvj18x_setup_mfc(link);
if (ret != 0) goto failed;
}
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index c36dcd1..e99abaa 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -231,7 +231,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
if (ret)
goto failed;
}
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
if (ret)
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index c0d85af..9980cbb 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -655,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
ioaddr = dev->base_addr;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index db6dbda..c9cd237 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -554,7 +554,7 @@ static int pcnet_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- if (link->io.NumPorts2 == 8) {
+ if (resource_size(link->resource[1]) == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
@@ -566,7 +566,7 @@ static int pcnet_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (info->flags & HAS_MISC_REG) {
if ((if_port == 1) || (if_port == 2))
dev->if_port = if_port;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 88f503a..1b0b323 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -457,7 +457,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
return -ENODEV;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
/* Allocate a memory window, for accessing the ISR */
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
@@ -545,7 +545,7 @@ static void mot_config(struct pcmcia_device *link)
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- unsigned int iouart = link->io.BasePort2;
+ unsigned int iouart = link->resource[1]->start;
/* Set UART base address and force map with COR bit 1 */
writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
@@ -614,7 +614,7 @@ static int smc_config(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
return i;
}
@@ -666,7 +666,7 @@ static int osi_config(struct pcmcia_device *link)
link->io.NumPorts2 = 0;
i = pcmcia_request_io(link, &link->io);
}
- dev->base_addr = link->io.BasePort1 + 0x10;
+ dev->base_addr = link->resource[0]->start + 0x10;
return i;
}
@@ -683,7 +683,7 @@ static int osi_load_firmware(struct pcmcia_device *link)
/* Download the Seven of Diamonds firmware */
for (i = 0; i < fw->size; i++) {
- outb(fw->data[i], link->io.BasePort1 + 2);
+ outb(fw->data[i], link->resource[0]->start + 2);
udelay(50);
}
release_firmware(fw);
@@ -725,12 +725,12 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
return rc;
} else if (manfid == MANFID_OSITECH) {
/* Make sure both functions are powered up */
- set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
+ set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
/* Now, turn on the interrupt for both card functions */
- set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
+ set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
- inw(link->io.BasePort1 + OSITECH_AUI_PWR),
- inw(link->io.BasePort1 + OSITECH_RESET_ISR));
+ inw(link->resource[0]->start + OSITECH_AUI_PWR),
+ inw(link->resource[0]->start + OSITECH_RESET_ISR));
}
return 0;
}
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index add6c82..1577b00 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -877,13 +877,13 @@ xirc2ps_config(struct pcmcia_device * link)
* the base address of the ethernet port (BasePort1) is written
* to the BAR registers of the modem.
*/
- err = pcmcia_write_config_byte(link, CISREG_IOBASE_0,
- link->io.BasePort2 & 0xff);
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
+ link->resource[1]->start & 0xff);
if (err)
goto config_error;
- err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
- link->io.BasePort2 & 0xff);
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, (u8)
+ link->resource[1]->start & 0xff);
if (err)
goto config_error;
@@ -907,7 +907,7 @@ xirc2ps_config(struct pcmcia_device * link)
* part.
*/
writeb(0x47, local->dingo_ccr + CISREG_COR);
- ioaddr = link->io.BasePort1;
+ ioaddr = link->resource[0]->start;
writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
@@ -954,7 +954,7 @@ xirc2ps_config(struct pcmcia_device * link)
/* we can now register the device with the net subsystem */
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
if (local->dingo)
do_reset(dev, 1); /* a kludge to make the cem56 work */
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 9389ba0..b7e7f50 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -271,7 +271,7 @@ static int airo_config(struct pcmcia_device *link)
goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq,
- link->io.BasePort1, 1, &link->dev);
+ link->resource[0]->start, 1, &link->dev);
if (!((local_info_t *)link->priv)->eth_dev)
goto failed;
@@ -281,12 +281,10 @@ static int airo_config(struct pcmcia_device *link)
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
if (link->win)
printk(", mem 0x%06lx-0x%06lx", req->Base,
req->Base+req->Size-1);
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 91ee74a..65b3aed 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -253,7 +253,7 @@ static int atmel_config(struct pcmcia_device *link)
((local_info_t*)link->priv)->eth_dev =
init_atmel_card(link->irq,
- link->io.BasePort1,
+ link->resource[0]->start,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
&link->dev,
card_present,
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index def63bf..6db7fd1 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -227,7 +227,7 @@ static void sandisk_set_iobase(local_info_t *local)
struct hostap_cs_priv *hw_priv = local->hw_priv;
res = pcmcia_write_config_byte(hw_priv->link, 0x10,
- hw_priv->link->io.BasePort1 & 0x00ff);
+ hw_priv->link->resource[0]->start & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
@@ -235,7 +235,7 @@ static void sandisk_set_iobase(local_info_t *local)
udelay(10);
res = pcmcia_write_config_byte(hw_priv->link, 0x12,
- hw_priv->link->io.BasePort1 & 0x00ff);
+ hw_priv->link->resource[0]->start & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
@@ -265,7 +265,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
local_info_t *local = iface->local;
struct hostap_cs_priv *hw_priv = local->hw_priv;
- if (hw_priv->link->io.NumPorts1 < 0x42) {
+ if (resource_size(hw_priv->link->resource[0]) < 0x42) {
/* Not enough ports to be SanDisk multi-function card */
ret = -ENODEV;
goto done;
@@ -604,7 +604,7 @@ static int prism2_config(struct pcmcia_device *link)
goto failed_unlock;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
spin_unlock_irqrestore(&local->irq_init_lock, flags);
@@ -616,12 +616,10 @@ static int prism2_config(struct pcmcia_device *link)
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
local->shutdown = 0;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 1d3a7e0..be4c475 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -853,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
/* Initialize io access */
- card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+ card->iobase = ioport_map(p_dev->resource[0]->start,
+ resource_size(p_dev->resource[0]));
if (!card->iobase) {
lbs_pr_err("error in ioport_map\n");
ret = -EIO;
@@ -872,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
}
/* Finally, report what we've done */
- lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
- p_dev->irq, p_dev->io.BasePort1,
- p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+ lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]);
/*
* Most of the libertas cards can do unaligned register access, but some
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 41ca4f1..6d514b5 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -257,7 +257,8 @@ orinoco_cs_config(struct pcmcia_device *link)
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ mem = ioport_map(link->resource[0]->start,
+ resource_size(link->resource[0]));
if (!mem)
goto failed;
@@ -279,7 +280,7 @@ orinoco_cs_config(struct pcmcia_device *link)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, link->io.BasePort1,
+ if (orinoco_if_add(priv, link->resource[0]->start,
link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 39399cd..4f8f55e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -319,7 +319,8 @@ spectrum_cs_config(struct pcmcia_device *link)
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
- mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ mem = ioport_map(link->resource[0]->start,
+ resource_size(link->resource[0]));
if (!mem)
goto failed;
@@ -346,7 +347,7 @@ spectrum_cs_config(struct pcmcia_device *link)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, link->io.BasePort1,
+ if (orinoco_if_add(priv, link->resource[0]->start,
link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 35f431b..a32f220 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1960,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {
printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index ee56fd6..fc1639c 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -177,12 +177,14 @@ static int parport_config(struct pcmcia_device *link)
if (ret)
goto failed;
- p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
+ p = parport_pc_probe_port(link->resource[0]->start,
+ link->resource[1]->start,
link->irq, PARPORT_DMA_NONE,
&link->dev, IRQF_SHARED);
if (p == NULL) {
printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
- "0x%3x, irq %u failed\n", link->io.BasePort1,
+ "0x%3x, irq %u failed\n",
+ (unsigned int) link->resource[0]->start,
link->irq);
goto failed;
}
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index b07b53e..3e040f5 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -167,7 +167,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
/* Set configuration options for the aha152x driver */
memset(&s, 0, sizeof(s));
s.conf = "PCMCIA setup";
- s.io_port = link->io.BasePort1;
+ s.io_port = link->resource[0]->start;
s.irq = link->irq;
s.scsiid = host_id;
s.reconnect = reconnect;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index ee04897..49a9a0a 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -137,10 +137,10 @@ static int fdomain_config(struct pcmcia_device *link)
goto failed;
/* A bad hack... */
- release_region(link->io.BasePort1, link->io.NumPorts1);
+ release_region(link->resource[0]->start, resource_size(link->resource[0]));
/* Set configuration options for the fdomain driver */
- sprintf(str, "%d,%d", link->io.BasePort1, link->irq);
+ sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq);
fdomain_setup(str);
host = __fdomain_16x0_detect(&fdomain_driver_template);
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index d414207..964c913 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1719,17 +1719,19 @@ static int nsp_cs_config(struct pcmcia_device *link)
goto cs_failed;
if (free_ports) {
- if (link->io.BasePort1) {
- release_region(link->io.BasePort1, link->io.NumPorts1);
+ if (link->resource[0]) {
+ release_region(link->resource[0]->start,
+ resource_size(link->resource[0]);
}
- if (link->io.BasePort2) {
- release_region(link->io.BasePort2, link->io.NumPorts2);
+ if (link->resource[1]) {
+ release_region(link->resource[1]->start,
+ resource_size(link->resource[1]);
}
}
/* Set port and IRQ */
- data->BaseAddress = link->io.BasePort1;
- data->NumAddress = link->io.NumPorts1;
+ data->BaseAddress = link->resource[0]->start;
+ data->NumAddress = resurce_size(link->resource[0]);
data->IrqNumber = link->irq;
nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
@@ -1764,13 +1766,10 @@ static int nsp_cs_config(struct pcmcia_device *link)
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
printk(", irq %d", link->irq);
}
- if (link->io.NumPorts1) {
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- }
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->resource[0])
+ printk(", io %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
if (link->win)
printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
cfg_mem->req.Base+cfg_mem->req.Size-1);
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index c1cf7f4..4e2b83f 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -215,18 +215,18 @@ static int qlogic_config(struct pcmcia_device * link)
if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
/* set ATAcmd */
- outb(0xb4, link->io.BasePort1 + 0xd);
- outb(0x24, link->io.BasePort1 + 0x9);
- outb(0x04, link->io.BasePort1 + 0xd);
+ outb(0xb4, link->resource[0]->start + 0xd);
+ outb(0x24, link->resource[0]->start + 0x9);
+ outb(0x04, link->resource[0]->start + 0xd);
}
/* The KXL-810AN has a bigger IO port window */
- if (link->io.NumPorts1 == 32)
+ if (resource_size(link->resource[0]) == 32)
host = qlogic_detect(&qlogicfas_driver_template, link,
- link->io.BasePort1 + 16, link->irq);
+ link->resource[0]->start + 16, link->irq);
else
host = qlogic_detect(&qlogicfas_driver_template, link,
- link->io.BasePort1, link->irq);
+ link->resource[0]->start, link->irq);
if (!host) {
printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
@@ -268,9 +268,9 @@ static int qlogic_resume(struct pcmcia_device *link)
if ((info->manf_id == MANFID_MACNICA) ||
(info->manf_id == MANFID_PIONEER) ||
(info->manf_id == 0x0098)) {
- outb(0x80, link->io.BasePort1 + 0xd);
- outb(0x24, link->io.BasePort1 + 0x9);
- outb(0x04, link->io.BasePort1 + 0xd);
+ outb(0x80, link->resource[0]->start + 0xd);
+ outb(0x24, link->resource[0]->start + 0x9);
+ outb(0x04, link->resource[0]->start + 0xd);
}
/* Ugggglllyyyy!!! */
qlogicfas408_bus_reset(NULL);
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index bd79e45..d99c0cb 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -733,9 +733,9 @@ SYM53C500_config(struct pcmcia_device *link)
(info->manf_id == MANFID_PIONEER) ||
(info->manf_id == 0x0098)) {
/* set ATAcmd */
- outb(0xb4, link->io.BasePort1 + 0xd);
- outb(0x24, link->io.BasePort1 + 0x9);
- outb(0x04, link->io.BasePort1 + 0xd);
+ outb(0xb4, link->resource[0]->start + 0xd);
+ outb(0x24, link->resource[0]->start + 0x9);
+ outb(0x04, link->resource[0]->start + 0xd);
}
/*
@@ -748,7 +748,7 @@ SYM53C500_config(struct pcmcia_device *link)
* 0x130, 0x230, 0x280, 0x290,
* 0x320, 0x330, 0x340, 0x350
*/
- port_base = link->io.BasePort1;
+ port_base = link->resource[0]->start;
irq_level = link->irq;
DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n",
@@ -821,15 +821,15 @@ static int sym53c500_resume(struct pcmcia_device *link)
if ((info->manf_id == MANFID_MACNICA) ||
(info->manf_id == MANFID_PIONEER) ||
(info->manf_id == 0x0098)) {
- outb(0x80, link->io.BasePort1 + 0xd);
- outb(0x24, link->io.BasePort1 + 0x9);
- outb(0x04, link->io.BasePort1 + 0xd);
+ outb(0x80, link->resource[0]->start + 0xd);
+ outb(0x24, link->resource[0]->start + 0x9);
+ outb(0x04, link->resource[0]->start + 0xd);
}
/*
* If things don't work after a "resume",
* this is a good place to start looking.
*/
- SYM53C500_int_host_reset(link->io.BasePort1);
+ SYM53C500_int_host_reset(link->resource[0]->start);
return 0;
}
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 2be8b10..fe7adcd 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -463,13 +463,13 @@ static int simple_config(struct pcmcia_device *link)
/* If the card is already configured, look up the port and irq */
if (link->function_config) {
unsigned int port = 0;
- if ((link->io.BasePort2 != 0) &&
- (link->io.NumPorts2 == 8)) {
- port = link->io.BasePort2;
+ if ((link->resource[1]->end != 0) &&
+ (resource_size(link->resource[1]) == 8)) {
+ port = link->resource[1]->end;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
- (link->io.NumPorts1 == 0x40)) {
- port = link->io.BasePort1 + 0x28;
+ (resource_size(link->resource[0]) == 0x40)) {
+ port = link->resource[0]->start + 0x28;
info->slave = 1;
}
if (info->slave) {
@@ -507,7 +507,7 @@ found_port:
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
return -1;
- return setup_serial(link, info, link->io.BasePort1, link->irq);
+ return setup_serial(link, info, link->resource[0]->start, link->irq);
}
static int multi_config_check(struct pcmcia_device *p_dev,
@@ -524,7 +524,7 @@ static int multi_config_check(struct pcmcia_device *p_dev,
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
- *base2 = p_dev->io.BasePort1 + 8;
+ *base2 = p_dev->resource[0]->start + 8;
return 0;
}
}
@@ -544,7 +544,7 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
p_dev->io.BasePort2 = cf->io.win[1].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
- *base2 = p_dev->io.BasePort2;
+ *base2 = p_dev->resource[1]->start;
return 0;
}
}
@@ -596,9 +596,9 @@ static int multi_config(struct pcmcia_device *link)
link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq);
- base2 = link->io.BasePort1;
+ base2 = link->resource[0]->start;;
} else {
- err = setup_serial(link, info, link->io.BasePort1,
+ err = setup_serial(link, info, link->resource[0]->start,
link->irq);
}
info->c950ctrl = base2;
@@ -613,7 +613,7 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
- setup_serial(link, info, link->io.BasePort1, link->irq);
+ setup_serial(link, info, link->resource[0]->start, link->irq);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq);
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index acef29c..208f1b7 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -170,7 +170,7 @@ static int das16cs_attach(struct comedi_device *dev,
if (!link)
return -EIO;
- dev->iobase = link->io.BasePort1;
+ dev->iobase = link->resource[0]->start;;
printk("I/O base=0x%04lx ", dev->iobase);
printk("fingerprint:\n");
@@ -787,12 +787,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %u", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
+ if (link->resource[0])
+ printk(", io %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(", io %pR", link->resource[1]);
printk("\n");
return;
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 3eddb7c..c4cfcff 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -88,7 +88,7 @@ static int das08_cs_attach(struct comedi_device *dev,
printk(" no pcmcia cards found\n");
return -EIO;
}
- iobase = link->io.BasePort1;
+ iobase = link->resource[0]->start;
} else {
printk(" bug! board does not have PCMCIA bustype\n");
return -EINVAL;
@@ -283,12 +283,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %u", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
+ if (link->resource[0])
+ printk(", io %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
return;
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index f3c4d2f..6d56957 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -376,7 +376,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)
link = pcmcia_cur_dev; /* XXX hack */
if (!link)
return -EIO;
- iobase = link->io.BasePort1;
+ iobase = link->resource[0]->start;
#ifdef incomplete
irq = link->irq;
#endif
@@ -644,12 +644,10 @@ static void dio700_config(struct pcmcia_device *link)
dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
+ if (link->resource[0])
+ printk(", io %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
if (link->win)
printk(", mem 0x%06lx-0x%06lx", req.Base,
req.Base + req.Size - 1);
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index f0c4367..29e1daf 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -128,7 +128,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
link = pcmcia_cur_dev; /* XXX hack */
if (!link)
return -EIO;
- iobase = link->io.BasePort1;
+ iobase = link->resource[0]->start;
#ifdef incomplete
irq = link->irq;
#endif
@@ -396,12 +396,10 @@ static void dio24_config(struct pcmcia_device *link)
dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
if (link->win)
printk(", mem 0x%06lx-0x%06lx", req.Base,
req.Base + req.Size - 1);
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 1ee78f8..fb10987 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -142,7 +142,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
link = pcmcia_cur_dev; /* XXX hack */
if (!link)
return -EIO;
- iobase = link->io.BasePort1;
+ iobase = link->resource[0]->start;
irq = link->irq;
break;
default:
@@ -373,12 +373,10 @@ static void labpc_config(struct pcmcia_device *link)
dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
if (link->win)
printk(", mem 0x%06lx-0x%06lx", req.Base,
req.Base + req.Size - 1);
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index 0bce220..f37dc22 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -355,7 +355,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -EIO;
dev->driver = &driver_ni_mio_cs;
- dev->iobase = link->io.BasePort1;
+ dev->iobase = link->resource[0]->start;
irq = link->irq;
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 67c0fa6..80b8d57 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -871,7 +871,7 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
}
}
- dev->iobase = local->link->io.BasePort1;
+ dev->iobase = local->link->resource[0]->start;
ret = alloc_subdevices(dev, 4);
if (ret < 0)
@@ -1153,12 +1153,10 @@ static void daqp_cs_config(struct pcmcia_device *link)
dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %u", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2 + link->io.NumPorts2 - 1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
return;
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index afe4575..2361537 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -319,7 +319,7 @@ void wl_adapter_insert( struct pcmcia_device *link )
goto failed;
dev->irq = link->irq;
- dev->base_addr = link->io.BasePort1;
+ dev->base_addr = link->resource[0]->start;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index f6c7e6f..a801036 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -150,7 +150,8 @@ static int ixj_config(struct pcmcia_device * link)
/*
* Register the card with the core.
*/
- j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
+ j = ixj_pcmcia_probe(link->resource[0]->start,
+ link->resource[0]->start + 0x10);
info->ndev = 1;
ixj_get_serial(link, j);
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index acb7e25..22e04f2 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -189,7 +189,7 @@ static int sl811_cs_config(struct pcmcia_device *link)
goto failed;
/* require an IRQ and two registers */
- if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
+ if (resource_size(link->resource[0]) < 2)
goto failed;
if (!link->irq)
@@ -204,11 +204,10 @@ static int sl811_cs_config(struct pcmcia_device *link)
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq);
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
+ printk(", io %pR", link->resource[0]);
printk("\n");
- if (sl811_hc_init(parent, link->io.BasePort1, link->irq)
+ if (sl811_hc_init(parent, link->resource[0]->start, link->irq)
< 0) {
failed:
printk(KERN_WARNING "sl811_cs_config failed\n");
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index df110df..9f897bc 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -231,7 +231,8 @@ static int pdacf_config(struct pcmcia_device *link)
if (ret)
goto failed;
- if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0)
+ if (snd_pdacf_assign_resources(pdacf, link->resource[0]->start,
+ link->irq) < 0)
goto failed;
return 0;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 624b47a..f23c235 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -241,7 +241,8 @@ static int vxpocket_config(struct pcmcia_device *link)
chip->dev = &link->dev;
snd_card_set_dev(chip->card, chip->dev);
- if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0)
+ if (snd_vxpocket_assign_resources(chip, link->resource[0]->start,
+ link->irq) < 0)
goto failed;
return 0;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 01/11] pcmcia: use pcmica_{read,write}_config_byte
From: Dominik Brodowski @ 2010-08-01 12:59 UTC (permalink / raw)
To: linux-pcmcia
Cc: Dominik Brodowski, netdev, linux-wireless, linux-serial,
Michael Buesch
In-Reply-To: <20100801125749.GA2564@comet.dominikbrodowski.net>
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead
of pcmcia_access_configuration_register.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/net/pcmcia/axnet_cs.c | 3 +-
drivers/net/pcmcia/nmclan_cs.c | 21 ++-----
drivers/net/pcmcia/xirc2ps_cs.c | 16 ++---
drivers/net/wireless/hostap/hostap_cs.c | 91 ++++++++--------------------
drivers/net/wireless/orinoco/spectrum_cs.c | 32 +++-------
drivers/pcmcia/cistpl.c | 7 +-
drivers/pcmcia/cs_internal.h | 4 +-
drivers/pcmcia/pcmcia_resource.c | 72 +++++++++++++---------
drivers/serial/serial_cs.c | 8 +--
drivers/ssb/pcmcia.c | 14 +----
include/pcmcia/cs.h | 12 ----
include/pcmcia/ds.h | 4 +-
12 files changed, 105 insertions(+), 179 deletions(-)
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 467fd4b..ee0a6d0 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -378,8 +378,7 @@ static int axnet_config(struct pcmcia_device *link)
/* Maybe PHY is in power down mode. (PPD_SET = 1)
Bit 2 of CCSR is active low. */
if (i == 32) {
- conf_reg_t reg = { 0, CS_WRITE, CISREG_CCSR, 0x04 };
- pcmcia_access_configuration_register(link, ®);
+ pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
for (i = 0; i < 32; i++) {
j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index c0eacfa..c0d85af 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -757,29 +757,20 @@ static void nmclan_reset(struct net_device *dev)
#if RESET_XILINX
struct pcmcia_device *link = &lp->link;
- conf_reg_t reg;
- u_long OrigCorValue;
+ u8 OrigCorValue;
/* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- pcmcia_access_configuration_register(link, ®);
- OrigCorValue = reg.Value;
+ pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
/* Reset Xilinx */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+ dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
OrigCorValue);
- reg.Value = COR_SOFT_RESET;
- pcmcia_access_configuration_register(link, ®);
+ pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
/* Need to wait for 20 ms for PCMCIA to finish reset. */
/* Restore original COR configuration index */
- reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
- pcmcia_access_configuration_register(link, ®);
+ pcmcia_write_config_byte(link, CISREG_COR,
+ (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
/* Xilinx is now completely reset along with the MACE chip. */
lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index a7662f0..add6c82 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -869,7 +869,6 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
if (local->dingo) {
- conf_reg_t reg;
win_req_t req;
memreq_t mem;
@@ -878,15 +877,14 @@ xirc2ps_config(struct pcmcia_device * link)
* the base address of the ethernet port (BasePort1) is written
* to the BAR registers of the modem.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_0;
- reg.Value = link->io.BasePort2 & 0xff;
- if ((err = pcmcia_access_configuration_register(link, ®)))
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_0,
+ link->io.BasePort2 & 0xff);
+ if (err)
goto config_error;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_1;
- reg.Value = (link->io.BasePort2 >> 8) & 0xff;
- if ((err = pcmcia_access_configuration_register(link, ®)))
+
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+ link->io.BasePort2 & 0xff);
+ if (err)
goto config_error;
/* There is no config entry for the Ethernet part which
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 2f4b6d4..def63bf 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -224,27 +224,18 @@ static int prism2_pccard_card_present(local_info_t *local)
static void sandisk_set_iobase(local_info_t *local)
{
int res;
- conf_reg_t reg;
struct hostap_cs_priv *hw_priv = local->hw_priv;
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = 0x10; /* 0x3f0 IO base 1 */
- reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, 0x10,
+ hw_priv->link->io.BasePort1 & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
udelay(10);
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = 0x12; /* 0x3f2 IO base 2 */
- reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, 0x12,
+ hw_priv->link->io.BasePort1 & 0x00ff);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
@@ -270,7 +261,6 @@ static void sandisk_write_hcr(local_info_t *local, int hcr)
static int sandisk_enable_wireless(struct net_device *dev)
{
int res, ret = 0;
- conf_reg_t reg;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
struct hostap_cs_priv *hw_priv = local->hw_priv;
@@ -297,12 +287,8 @@ static int sandisk_enable_wireless(struct net_device *dev)
" - using vendor-specific initialization\n", dev->name);
hw_priv->sandisk_connectplus = 1;
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
@@ -310,16 +296,13 @@ static int sandisk_enable_wireless(struct net_device *dev)
}
mdelay(5);
- reg.Function = 0;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
/*
* Do not enable interrupts here to avoid some bogus events. Interrupts
* will be enabled during the first cor_sreset call.
*/
- reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ (COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
+ COR_FUNC_ENA));
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
@@ -342,30 +325,23 @@ done:
static void prism2_pccard_cor_sreset(local_info_t *local)
{
int res;
- conf_reg_t reg;
+ u8 val;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
}
printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
- reg.Value);
+ val);
- reg.Action = CS_WRITE;
- reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ val |= COR_SOFT_RESET;
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
@@ -374,11 +350,10 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
- reg.Value &= ~COR_SOFT_RESET;
+ val &= ~COR_SOFT_RESET;
if (hw_priv->sandisk_connectplus)
- reg.Value |= COR_IREQ_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ val |= COR_IREQ_ENA;
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
@@ -395,8 +370,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
{
int res;
- conf_reg_t reg;
- int old_cor;
+ u8 old_cor;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
@@ -407,25 +381,17 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
return;
}
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
}
printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
- reg.Value);
- old_cor = reg.Value;
+ old_cor);
- reg.Action = CS_WRITE;
- reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ old_cor | COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
@@ -435,11 +401,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
mdelay(10);
/* Setup Genesis mode */
- reg.Action = CS_WRITE;
- reg.Value = hcr;
- reg.Offset = CISREG_CCSR;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
@@ -447,11 +409,8 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
}
mdelay(10);
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = old_cor & ~COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link,
- ®);
+ res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+ old_cor & ~COR_SOFT_RESET);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index cad30e4..39399cd 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -79,35 +79,27 @@ static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
int ret;
- conf_reg_t reg;
- u_int save_cor;
+ u8 save_cor;
+ u8 ccsr;
/* Doing it if hardware is gone is guaranteed crash */
if (!pcmcia_dev_present(link))
return -ENODEV;
/* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- ret = pcmcia_access_configuration_register(link, ®);
+ ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
if (ret)
goto failed;
- save_cor = reg.Value;
/* Soft-Reset card */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor | COR_SOFT_RESET);
- ret = pcmcia_access_configuration_register(link, ®);
+ ret = pcmcia_write_config_byte(link, CISREG_COR,
+ (save_cor | COR_SOFT_RESET));
if (ret)
goto failed;
udelay(1000);
/* Read CCSR */
- reg.Action = CS_READ;
- reg.Offset = CISREG_CCSR;
- ret = pcmcia_access_configuration_register(link, ®);
+ ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
if (ret)
goto failed;
@@ -115,19 +107,15 @@ spectrum_reset(struct pcmcia_device *link, int idle)
* Start or stop the firmware. Memory width bit should be
* preserved from the value we've just read.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_CCSR;
- reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- ret = pcmcia_access_configuration_register(link, ®);
+ ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
+ ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
if (ret)
goto failed;
udelay(1000);
/* Restore original COR configuration index */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- reg.Value = (save_cor & ~COR_SOFT_RESET);
- ret = pcmcia_access_configuration_register(link, ®);
+ ret = pcmcia_write_config_byte(link, CISREG_COR,
+ (save_cor & ~COR_SOFT_RESET));
if (ret)
goto failed;
udelay(1000);
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index ba4a5ac..1733fab 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -209,7 +209,7 @@ int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
* Probably only useful for writing one-byte registers. Must be called
* with ops_mutex held.
*/
-void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
+int pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
u_int len, void *ptr)
{
void __iomem *sys, *end;
@@ -231,7 +231,7 @@ void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
((cis_width) ? MAP_16BIT : 0));
if (!sys) {
dev_dbg(&s->dev, "could not map memory\n");
- return; /* FIXME: Error */
+ return -EINVAL;
}
writeb(flags, sys+CISREG_ICTRL0);
@@ -256,7 +256,7 @@ void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
sys = set_cis_map(s, card_offset, flags);
if (!sys) {
dev_dbg(&s->dev, "could not map memory\n");
- return; /* FIXME: error */
+ return -EINVAL;
}
end = sys + s->map_size;
@@ -270,6 +270,7 @@ void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
addr = 0;
}
}
+ return 0;
}
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 45e7fd1..cebd40d 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -158,8 +158,8 @@ extern struct bin_attribute pccard_cis_attr;
int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
u_int addr, u_int len, void *ptr);
-void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr,
- u_int addr, u_int len, void *ptr);
+int pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr,
+ u_int addr, u_int len, void *ptr);
void release_cis_mem(struct pcmcia_socket *s);
void destroy_cis_cache(struct pcmcia_socket *s);
int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 2394de4..563750e 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -108,25 +108,25 @@ static void release_io_space(struct pcmcia_socket *s, unsigned int base,
} /* release_io_space */
-/** pccard_access_configuration_register
+/**
+ * pcmcia_access_config() - read or write card configuration registers
*
- * Access_configuration_register() reads and writes configuration
- * registers in attribute memory. Memory window 0 is reserved for
- * this and the tuple reading services.
+ * pcmcia_access_config() reads and writes configuration registers in
+ * attribute memory. Memory window 0 is reserved for this and the tuple
+ * reading services. Drivers must use pcmcia_read_config_byte() or
+ * pcmcia_write_config_byte().
*/
-
-int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
- conf_reg_t *reg)
+static int pcmcia_access_config(struct pcmcia_device *p_dev,
+ off_t where, u8 *val,
+ int (*accessf) (struct pcmcia_socket *s,
+ int attr, unsigned int addr,
+ unsigned int len, void *ptr))
{
struct pcmcia_socket *s;
config_t *c;
int addr;
- u_char val;
int ret = 0;
- if (!p_dev || !p_dev->function_config)
- return -EINVAL;
-
s = p_dev->socket;
mutex_lock(&s->ops_mutex);
@@ -138,26 +138,40 @@ int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
return -EACCES;
}
- addr = (c->ConfigBase + reg->Offset) >> 1;
+ addr = (c->ConfigBase + where) >> 1;
+
+ ret = accessf(s, 1, addr, 1, val);
- switch (reg->Action) {
- case CS_READ:
- ret = pcmcia_read_cis_mem(s, 1, addr, 1, &val);
- reg->Value = val;
- break;
- case CS_WRITE:
- val = reg->Value;
- pcmcia_write_cis_mem(s, 1, addr, 1, &val);
- break;
- default:
- dev_dbg(&s->dev, "Invalid conf register request\n");
- ret = -EINVAL;
- break;
- }
mutex_unlock(&s->ops_mutex);
+
return ret;
-} /* pcmcia_access_configuration_register */
-EXPORT_SYMBOL(pcmcia_access_configuration_register);
+} /* pcmcia_access_config */
+
+
+/**
+ * pcmcia_read_config_byte() - read a byte from a card configuration register
+ *
+ * pcmcia_read_config_byte() reads a byte from a configuration register in
+ * attribute memory.
+ */
+int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val)
+{
+ return pcmcia_access_config(p_dev, where, val, pcmcia_read_cis_mem);
+}
+EXPORT_SYMBOL(pcmcia_read_config_byte);
+
+
+/**
+ * pcmcia_write_config_byte() - write a byte to a card configuration register
+ *
+ * pcmcia_write_config_byte() writes a byte to a configuration register in
+ * attribute memory.
+ */
+int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val)
+{
+ return pcmcia_access_config(p_dev, where, &val, pcmcia_write_cis_mem);
+}
+EXPORT_SYMBOL(pcmcia_write_config_byte);
int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 2b99c7b..2be8b10 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -114,16 +114,14 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
static int quirk_post_ibm(struct pcmcia_device *link)
{
- conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+ u8 val;
int ret;
- ret = pcmcia_access_configuration_register(link, ®);
+ ret = pcmcia_read_config_byte(link, 0x800, &val);
if (ret)
goto failed;
- reg.Action = CS_WRITE;
- reg.Value = reg.Value | 1;
- ret = pcmcia_access_configuration_register(link, ®);
+ ret = pcmcia_write_config_byte(link, 0x800, val | 1);
if (ret)
goto failed;
return 0;
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index 2152030..526682d 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -71,14 +71,9 @@
/* Write to a PCMCIA configuration register. */
static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value)
{
- conf_reg_t reg;
int res;
- memset(®, 0, sizeof(reg));
- reg.Offset = offset;
- reg.Action = CS_WRITE;
- reg.Value = value;
- res = pcmcia_access_configuration_register(bus->host_pcmcia, ®);
+ res = pcmcia_write_config_byte(bus->host_pcmcia, offset, value);
if (unlikely(res != 0))
return -EBUSY;
@@ -88,16 +83,11 @@ static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value)
/* Read from a PCMCIA configuration register. */
static int ssb_pcmcia_cfg_read(struct ssb_bus *bus, u8 offset, u8 *value)
{
- conf_reg_t reg;
int res;
- memset(®, 0, sizeof(reg));
- reg.Offset = offset;
- reg.Action = CS_READ;
- res = pcmcia_access_configuration_register(bus->host_pcmcia, ®);
+ res = pcmcia_read_config_byte(bus->host_pcmcia, offset, value);
if (unlikely(res != 0))
return -EBUSY;
- *value = reg.Value;
return 0;
}
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index c78d9b1..64e853d 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -19,18 +19,6 @@
#include <linux/interrupt.h>
#endif
-/* For AccessConfigurationRegister */
-typedef struct conf_reg_t {
- u_char Function;
- u_int Action;
- off_t Offset;
- u_int Value;
-} conf_reg_t;
-
-/* Actions */
-#define CS_READ 1
-#define CS_WRITE 2
-
/* for AdjustResourceInfo */
/* Action field */
#define REMOVE_MANAGED_RESOURCE 1
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index e614aa0..d494ce4 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -174,8 +174,8 @@ struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *p_dev);
int pcmcia_reset_card(struct pcmcia_socket *skt);
/* CIS config */
-int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
- conf_reg_t *reg);
+int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val);
+int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val);
/* device configuration */
int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
--
1.7.0.4
^ permalink raw reply related
* Re: shape traffic on tun interfaces
From: Alexander Clouter @ 2010-08-01 10:27 UTC (permalink / raw)
To: netdev; +Cc: lartc
In-Reply-To: <301941280614170@web105.yandex.ru>
Franchoze Eric <franchoze@yandex.ru> wrote:
>
> Do we have any interface to shape traffic per destination IP? The
> standrad HTB shapes it per device, which is not suitable for case if
> limitation required per destination IP. For example openvpn server
> which servers about 3000 clients and has 10 internal tun interfases
> (tun0-tun9).
>
Do the QoS on your next hop router or on the interface all your
de-encapsulated VPN traffic flows over (ie. 'eth0') instead.
Cheers
--
Alexander Clouter
.sigmonster says: He who always plows a straight furrow is in a rut.
^ permalink raw reply
* Re: [PATCH] can-raw: Fix skb_orphan_try handling
From: Oliver Hartkopp @ 2010-08-01 10:50 UTC (permalink / raw)
To: David Miller
Cc: socketcan-core-0fE9KPoRgkgATYTw5x5z8w,
netdev-u79uwXL29TY76Z2rM5mHXA,
patrick.ohly-ral2JQCrhuEAvxtiuMwx3w,
eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w
In-Reply-To: <20100801.010337.68133932.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
On 01.08.2010 10:03, David Miller wrote:
> From: Oliver Hartkopp <socketcan-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>
> Date: Fri, 30 Jul 2010 11:44:27 +0200
>
>> Hello Eric, hello Patrick,
>>
>> Commit fc6055a5ba31e2c14e36e8939f9bf2b6d586a7f5 (net: Introduce
>> skb_orphan_try()) allows an early orphan of the skb and takes care on
>> tx timestamping, which needs the sk-reference in the skb on driver level.
>> So does the can-raw socket, which has not been taken into account here.
>>
>> The patch below adds a 'prevent_sk_orphan' bit in the skb tx shared info,
>> which fixes the problem discovered by Matthias Fuchs here:
>>
>> http://marc.info/?t=128030411900003&r=1&w=2
>
> Your patch sets this new value, but I never see it getting tested anywhere.
>
> How does this work?
The flags are tested all together in skb_orphan_try() ...
See at
http://git.kernel.org/?p=linux/kernel/git/davem/net-next-2.6.git;a=commitdiff;h=fc6055a5ba31e2c14e36e8939f9bf2b6d586a7f5
+/*
+ * Try to orphan skb early, right before transmission by the device.
+ * We cannot orphan skb if tx timestamp is requested, since
+ * drivers need to call skb_tstamp_tx() to send the timestamp.
+ */
+static inline void skb_orphan_try(struct sk_buff *skb)
+{
+ if (!skb_tx(skb)->flags)
+ skb_orphan(skb);
+}
So my patch just added a new bit that's tested here but does not touch the
rest of the tx timestamp bits that are checked at this place.
Regards,
Oliver
^ permalink raw reply
* Re: [PATCH repost] sched: export sched_set/getaffinity to modules
From: Michael S. Tsirkin @ 2010-08-01 8:50 UTC (permalink / raw)
To: Oleg Nesterov
Cc: Sridhar Samudrala, Peter Zijlstra, Tejun Heo, Ingo Molnar, netdev,
lkml, kvm@vger.kernel.org, Andrew Morton, Dmitri Vorobiev,
Jiri Kosina, Thomas Gleixner, Andi Kleen
In-Reply-To: <20100730141901.GA9076@redhat.com>
On Fri, Jul 30, 2010 at 04:19:01PM +0200, Oleg Nesterov wrote:
> Sorry for the delay, I can't be responsive these days...
>
> On 07/27, Michael S. Tsirkin wrote:
> >
> > On Mon, Jul 26, 2010 at 08:08:34PM +0200, Oleg Nesterov wrote:
> > > On 07/26, Sridhar Samudrala wrote:
> > > >
> > > > I have been testing out a similar patch that uses kernel_thread() without CLONE_FILES
> > > > flag rather than create_kthread() and then closing the files.
> > >
> > > !CLONE_FILES can't help. copy_files() does dup_fd() in this case.
> > > The child still inherits the files.
> > >
> > > > Either version should be fine.
> > >
> > > I think neither version is fine ;)
> > >
> > > exit_files() is not enough too. How about the signals, reparenting?
> > >
> > >
> > > I already forgot all details, probably I missed somethig. But it
> > > seems to me that it is better to just export get/set affinity and
> > > forget about all complications.
> > >
> > > Oleg.
> >
> > Oleg, so can I attach your Ack to the patch in question, and merge
> > it all through net-next?
>
> Well, I do not think you need my ack ;)
>
>
> But I must admit, I personally dislike this idea. A kernel thread which
> is the child of the user-space process, and in fact it is not the "real"
> kernel thread. I think this is against the common case. If you do not
> care the signals/reparenting, why can't you fork the user-space process
> which does all the work via ioctl's ? OK, I do not understand the problem
> domain, probably this can't work.
>
> Anyway, the patch looks buggy to me. Starting from
>
> create_kthread(&create);
> wait_for_completion(&create.done);
>
> At least you should check create_kthread() suceeds, otherwise
> wait_for_completion() will hang forever. OTOH, if it suceeds then
> wait_for_completion() is not needed. But this is minor.
>
> create_kthread()->kernel_thread() uses CLONE_VM, this means that the
> child will share ->mm. And this means that if the parent recieves
> the coredumping signal it will hang forever in kernel space waiting
> until this child exits.
>
> This is just the immediate surprise I can see with this approach,
> I am afraid there is something else.
>
> And once again. We are doing this hacks only because we lack a
> couples of exports (iiuk). This is, well, a bit strange ;)
>
> Oleg.
Oleg, I mean Ack the exporting of get/set affinity.
Thanks!
--
MST
^ permalink raw reply
* Re: [PATCH] vhost: locking/rcu cleanup
From: Michael S. Tsirkin @ 2010-08-01 8:41 UTC (permalink / raw)
To: Tejun Heo
Cc: David S. Miller, Sridhar Samudrala, Jeff Dike, Juan Quintela,
Rusty Russell, Takuya Yoshikawa, David Stevens, Paul E. McKenney,
kvm, virtualization, netdev, linux-kernel
In-Reply-To: <4C52E692.3070405@kernel.org>
On Fri, Jul 30, 2010 at 04:49:54PM +0200, Tejun Heo wrote:
> Hello,
>
> On 07/29/2010 02:23 PM, Michael S. Tsirkin wrote:
> > I saw WARN_ON(!list_empty(&dev->work_list)) trigger
> > so our custom flush is not as airtight as need be.
>
> Could be but it's also possible that something has queued something
> after the last flush?
> Is the problem reproducible?
Well, We do requeue from the job itself. So need to be careful with what
we do with indexes here. Bug seemed to happen all the time when qemu was
killed under stress but now I can't reproduce anymore :(
Will try again later.
> > This patch switches to a simple atomic counter + srcu instead of
> > the custom locked queue + flush implementation.
> >
> > This will slow down the setup ioctls, which should not matter -
> > it's slow path anyway. We use the expedited flush to at least
> > make sure it has a sane time bound.
> >
> > Works fine for me. I got reports that with many guests,
> > work lock is highly contended, and this patch should in theory
> > fix this as well - but I haven't tested this yet.
>
> Hmmm... vhost_poll_flush() becomes synchronize_srcu_expedited(). Can
> you please explain how it works? synchronize_srcu_expedited() is an
> extremely heavy operation involving scheduling the cpu_stop task on
> all cpus. I'm not quite sure whether doing it from every flush is a
> good idea. Is flush supposed to be a very rare operation?
It is rare - happens on guest reboot typically. I guess I will
switch to regular synchronize_srcu.
> Having custom implementation is fine too but let's try to implement
> something generic if at all possible.
>
> Thanks.
Sure. It does seem that avoiding list lock would be pretty hard
in generic code though.
> --
> tejun
^ permalink raw reply
* Re: [RFC PATCH v8 00/16] Provide a zero-copy method on KVM virtio-net.
From: Michael S. Tsirkin @ 2010-08-01 8:31 UTC (permalink / raw)
To: Shirley Ma
Cc: xiaohui.xin, netdev, kvm, linux-kernel, mingo, davem, herbert,
jdike
In-Reply-To: <1280442682.9058.15.camel@localhost.localdomain>
On Thu, Jul 29, 2010 at 03:31:22PM -0700, Shirley Ma wrote:
> I did some vhost performance measurement over 10Gb ixgbe, and found that
> in order to get consistent BW results, netperf/netserver, qemu, vhost
> threads smp affinities are required.
Could you provide an example of a good setup?
Specifically, is it a good idea for the vhost thread
to inherit CPU affinities from qemu?
> Looking forward to these results for small message size comparison.
I think we should explore the idea for the driver to fall back on data copy
for small message sizes.
The benefit of zero copy would then be CPU utilization on large messages.
> For
> large message size 10Gb ixgbe BW already reached by doing vhost smp
> affinity w/i offloading support, we will see how much CPU utilization it
> can be reduced.
>
> Please provide latency results as well. I did some experimental on
> macvtap zero copy sendmsg, what I have found that get_user_pages latency
> pretty high.
>
> Thanks
> Shirley
>
>
>
^ permalink raw reply
* Re: [RFC PATCH v8 00/16] Provide a zero-copy method on KVM virtio-net.
From: Avi Kivity @ 2010-08-01 8:18 UTC (permalink / raw)
To: Shirley Ma
Cc: xiaohui.xin, netdev, kvm, linux-kernel, mst, mingo, davem,
herbert, jdike
In-Reply-To: <1280504771.9058.25.camel@localhost.localdomain>
On 07/30/2010 06:46 PM, Shirley Ma wrote:
> Hello Avi,
>
> On Fri, 2010-07-30 at 08:02 +0300, Avi Kivity wrote:
>> get_user_pages() is indeed slow. But what about
>> get_user_pages_fast()?
>>
>> Note that when the page is first touched, get_user_pages_fast() falls
>> back to get_user_pages(), so the latency needs to be measured after
>> quite a bit of warm-up.
> Yes, I used get_user_pages_fast, however if falled back to
> get_user_pages() when the apps doesn't allocate buffer on the same page.
> If I run a single ping, the RTT is extremely high, but when running
> multiple pings, the RTT time reduce significantly, but still it is not
> as fast as copy from my initial test. I am thinking that we might need
> to pre-pin memory pool.
>
I don't understand. Under what conditions do you use get_user_pages()
instead of get_user_pages_fast()? Why?
--
error compiling committee.c: too many arguments to function
^ permalink raw reply
* Re: [RFC PATCH 2/2] igb/ixgbe: add code to trigger function reset if reset_devices is set
From: David Miller @ 2010-08-01 8:15 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: jbarnes, netdev, linux-pci, alexander.h.duyck
In-Reply-To: <20100731005910.32625.89518.stgit@localhost.localdomain>
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 30 Jul 2010 17:59:12 -0700
> From: Alexander Duyck <alexander.h.duyck@intel.com>
>
> This change makes it so that both igb and ixgbe can trigger a full pcie
> function reset if the reset_devices kernel parameter is defined. The main
> reason for adding this is that kdump can cause serious issues when the
> kdump kernel resets the IOMMU while DMA transactions are still occurring.
>
> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
I tend to disagree with the essence of this change.
Which is that we should add workaround after workaround for things
that aren't functioning properly in kdump and kexec.
They should have a pass that shuts devices down properly, so that this
kind of stuff doesn't need to happen in the kernel we then boot into.
What happens on non-PCIE systems then? Do they just lose when this
happens?
No, you dun goof'd. :-) Find another way to fix this please.
Thanks.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox