* Re: Reset hardware address (MAC address) in c++
From: Ben Hutchings @ 2011-01-09 16:06 UTC (permalink / raw)
To: Chin Shi Hong; +Cc: netdev
In-Reply-To: <AANLkTimW247sL7mVKChOVjGFTcSA4mYZhwXdasfaYzXN@mail.gmail.com>
On Sun, 2011-01-09 at 22:39 +0800, Chin Shi Hong wrote:
> Dear All,
>
> My final year project is all about MAC address spoofing.
>
> I do know that I can reset the MAC address of my network adapter to
> its original by rebooting the Linux operating system I am using.
>
> My Linux distribution is using NetworkManager. On Wireless network,
> each time after I change the MAC address of my wireless network
> adapter and then connect to the wireless network, and then once I
> disconnect from wireless network, NetworkManager will reset the MAC
> address of my wireless network adapter to its original.
>
> I had programmed my application to change the MAC address. Now, trying
> to implement the feature that reset the MAC address. I don't know
> whether NetworkManager record down the original MAC address of my
> Network Adapter or not. But, assume if NetworkManager is able to reset
> the MAC address of my network adapter to its original MAC address
> without recording the original MAC address and without reboot, then my
> application must be able to do the same.
>
> So, can anyone tell me the C++ codes that is able to reset the MAC
> address, or give me some ideas on this, please?
You can read the permanent MAC address using the ethtool
ETHTOOL_GPERMADDR operation. See the ethtool utility for an example of
how to use this.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: [PATCH 3/3] offloading: Force software GSO for multiple vlan tags.
From: Jesse Gross @ 2011-01-09 16:00 UTC (permalink / raw)
To: Michał Mirosław; +Cc: David Miller, netdev, Ben Hutchings
In-Reply-To: <AANLkTi=dwVOeRZvVJu=ft2Sq_FSgcEficCc750gawOsH@mail.gmail.com>
2011/1/7 Michał Mirosław <mirqus@gmail.com>:
> Hi,
>
> Sorry for late reply, I noticed this patch only after it went to Linus' tree.
>
> 2010/10/30 Jesse Gross <jesse@nicira.com>:
>> We currently use vlan_features to check for TSO support if there is
>> a vlan tag. However, it's quite likely that the NIC is not able to
>> do TSO when there is an arbitrary number of tags. Therefore if there
>> is more than one tag (in-band or out-of-band), fall back to software
>> emulation.
>>
>> Signed-off-by: Jesse Gross <jesse@nicira.com>
>> CC: Ben Hutchings <bhutchings@solarflare.com>
>> ---
>> include/linux/netdevice.h | 7 +++----
>> net/core/dev.c | 16 ++++++++++++++++
>> 2 files changed, 19 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
>> index 072652d..980c752 100644
>> --- a/include/linux/netdevice.h
>> +++ b/include/linux/netdevice.h
>> @@ -2234,6 +2234,8 @@ unsigned long netdev_fix_features(unsigned long features, const char *name);
>> void netif_stacked_transfer_operstate(const struct net_device *rootdev,
>> struct net_device *dev);
>>
>> +int netif_get_vlan_features(struct sk_buff *skb, struct net_device *dev);
>> +
>> static inline int net_gso_ok(int features, int gso_type)
>> {
>> int feature = gso_type << NETIF_F_GSO_SHIFT;
>> @@ -2249,10 +2251,7 @@ static inline int skb_gso_ok(struct sk_buff *skb, int features)
>> static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
>> {
>> if (skb_is_gso(skb)) {
>> - int features = dev->features;
>> -
>> - if (skb->protocol == htons(ETH_P_8021Q) || skb->vlan_tci)
>> - features &= dev->vlan_features;
>> + int features = netif_get_vlan_features(skb, dev);
>>
>> return (!skb_gso_ok(skb, features) ||
>> unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
>> diff --git a/net/core/dev.c b/net/core/dev.c
>> index 8bdda70..8d74988 100644
>> --- a/net/core/dev.c
>> +++ b/net/core/dev.c
>> @@ -1969,6 +1969,22 @@ static inline void skb_orphan_try(struct sk_buff *skb)
>> }
>> }
>>
>> +int netif_get_vlan_features(struct sk_buff *skb, struct net_device *dev)
>> +{
>> + __be16 protocol = skb->protocol;
>> +
>> + if (protocol == htons(ETH_P_8021Q)) {
>> + struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
>> + protocol = veh->h_vlan_encapsulated_proto;
>> + } else if (!skb->vlan_tci)
>> + return dev->features;
>> +
>> + if (protocol != htons(ETH_P_8021Q))
>> + return dev->features & dev->vlan_features;
>> + else
>> + return 0;
>> +}
>
> This clears all features for multiply-tagged frames. At least SG,
> FRAGLIST and HW_CSUM are perfectly valid for those frames.
>
> This doesn't really matter if this function stays used only in
> netif_needs_gso(). It's name and placement suggests otherwise, though.
You're right and in fact I have some upcoming changes that expands the
use of this function to places that do care about these offloads.
I've generalized it as you suggest.
Thanks.
^ permalink raw reply
* Re: [PATCH 2/2] sky2: convert to new VLAN model
From: Jesse Gross @ 2011-01-09 15:50 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: David Miller, netdev
In-Reply-To: <20110107092758.7dc1152f@nehalam>
On Fri, Jan 7, 2011 at 12:27 PM, Stephen Hemminger
<shemminger@vyatta.com> wrote:
> On Fri, 7 Jan 2011 12:14:51 -0500
> Jesse Gross <jesse@nicira.com> wrote:
>
>> On Thu, Jan 6, 2011 at 11:41 PM, Stephen Hemminger
>> <shemminger@vyatta.com> wrote:
>> > +/* Features available on VLAN with transmit tag stripped */
>> > +#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO)
>> > +
>> > +static void sky2_vlan_mode(struct net_device *dev)
>> > {
>> > - if (onoff) {
>> > + struct sky2_port *sky2 = netdev_priv(dev);
>> > + struct sky2_hw *hw = sky2->hw;
>> > + u16 port = sky2->port;
>> > +
>> > + if (dev->features & NETIF_F_HW_VLAN_RX)
>> > sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
>> > RX_VLAN_STRIP_ON);
>> > + else
>> > + sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
>> > + RX_VLAN_STRIP_OFF);
>> > +
>> > + if (dev->features & NETIF_F_HW_VLAN_TX) {
>> > sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
>> > TX_VLAN_TAG_ON);
>> > + dev->vlan_features = dev->features & VLAN_FEAT;
>> > } else {
>> > - sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
>> > - RX_VLAN_STRIP_OFF);
>> > sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
>> > TX_VLAN_TAG_OFF);
>> > + dev->vlan_features = dev->features & NETIF_F_HIGHDMA;
>>
>> Hmm, the chip supports SG only when TX vlan is on and HIGHDMA only
>> when it is off? Currently skb_needs_linearize() assumes that when not
>> using vlan acceleration, the DMA engine doesn't care about the
>> presence of a vlan tag and directly uses dev->features.
>
> The chip supports checksum offload only if TX_VLAN is enabled.
> Scatter/gather without checksum offload is not allowed by kernel
> because checksum offload is needed for sendfile.
OK, it sounds like skb_needs_linearize() needs to be more intelligent.
I will send a patch for that shortly.
^ permalink raw reply
* Re: [PATCH net-next-2.6 v3 1/1] can: c_can: Added support for Bosch C_CAN controller
From: Wolfgang Grandegger @ 2011-01-09 14:40 UTC (permalink / raw)
To: Oliver Hartkopp
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w, Marc Kleine-Budde,
David Miller
In-Reply-To: <4D299583.10909-fJ+pQTUTwRTk1uMJSBkQmQ@public.gmane.org>
Hi Oliver,
On 01/09/2011 12:01 PM, Oliver Hartkopp wrote:
> On 06.01.2011 21:08, Wolfgang Grandegger wrote:
>> Hi Marc,
>>
>> On 01/06/2011 08:44 PM, Marc Kleine-Budde wrote:
>
>>> If this driver will be merged, we'll have two drivers for the same can
>>> core in the tree. The other one is the pch_can. What do you think should
>>> be the mid term perspective for ccan based hardware?
>>
>> Yes, I know. Unfortunately, we did realize rather late the the PCH
>> controller is a C_CAN clone and the OKI/Intel ppls did not tell us
>> either. Therefore I asked Bhupesh to provide a SJA1000-a-like interface
>> for the C_CAN, which would allow us to provide an alternative PCI driver
>> "pch_pci.c" for the PCH. If that driver works well on the PCH hardware
>> as well, we should merge the best of both, if necessary, and then
>> finally remove the pch_can driver. Would that be a reasonable proposal.
>
> At least for me this looks great. The idea to have a similar approach as we
> successfully implemented for the sja1000 will solve future hardware
> implementations based on the ccan controller core.
A common driver for c_can based devices will stabilize more quickly and
does also especially reduce the maintanance effort significantly.
> BTW. for the next submission of Bhupeshs patchset, i would propose to name the
> driver 'ccan' instead of 'c_can', so that we have a
>
> linux/drivers/net/can/ccan/...
>
> path.
You are late ;-). Bosch named the controller *C_CAN* and therefore I
asked Bhupesh some time ago to change the file name and variable name
prefix from ccan to c_can.
> Checking directory names in linux/drivers with
>
> find . -type d | grep '_'
>
> driver names with underscores are pretty unusual and mostly selected without
> fortune:
>
> ./staging/olpc_dcon
> ./staging/wlags49_h2
> ./staging/wlags49_h2/man
> ./staging/serqt_usb2
> ./staging/intel_sst
> ./staging/quatech_usb2
> ./staging/asus_oled
> ./staging/wlags49_h25
> ./staging/ath6kl/hif/sdio/linux_sdio <- Ugh!
> ./staging/ath6kl/hif/sdio/linux_sdio/src
> ./staging/ath6kl/hif/sdio/linux_sdio/include
> ./net/pch_gbe
> ./net/fs_enet
> ./net/wireless/libertas_tf
> ./net/ibm_newemacds
>
> For that reason i would prefer 'ccan' to name this driver core.
Well, not really a strong argument. But well, if other people do
*prefer* ccan I would not object against it. Bhupesh, what's your opinion.
Wolfgang.
^ permalink raw reply
* Reset hardware address (MAC address) in c++
From: Chin Shi Hong @ 2011-01-09 14:39 UTC (permalink / raw)
To: netdev
Dear All,
My final year project is all about MAC address spoofing.
I do know that I can reset the MAC address of my network adapter to
its original by rebooting the Linux operating system I am using.
My Linux distribution is using NetworkManager. On Wireless network,
each time after I change the MAC address of my wireless network
adapter and then connect to the wireless network, and then once I
disconnect from wireless network, NetworkManager will reset the MAC
address of my wireless network adapter to its original.
I had programmed my application to change the MAC address. Now, trying
to implement the feature that reset the MAC address. I don't know
whether NetworkManager record down the original MAC address of my
Network Adapter or not. But, assume if NetworkManager is able to reset
the MAC address of my network adapter to its original MAC address
without recording the original MAC address and without reboot, then my
application must be able to do the same.
So, can anyone tell me the C++ codes that is able to reset the MAC
address, or give me some ideas on this, please?
Regards,
^ permalink raw reply
* [PATCH net-2.6 5/5] bnx2x: Update version to 1.60.01-1
From: Vladislav Zolotarov @ 2011-01-09 12:20 UTC (permalink / raw)
To: Dave Miller; +Cc: netdev list, Eilon Greenstein
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 8ee0ff1..0c941a4 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -20,8 +20,8 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.60.01-0"
-#define DRV_MODULE_RELDATE "2010/11/12"
+#define DRV_MODULE_VERSION "1.60.01-1"
+#define DRV_MODULE_RELDATE "2011/01/09"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
--
1.7.0.4
^ permalink raw reply related
* [PATCH net-2.6 4/5] bnx2x: Fix the race on bp->stats_pending.
From: Vladislav Zolotarov @ 2011-01-09 12:20 UTC (permalink / raw)
To: Dave Miller; +Cc: netdev list, Eilon Greenstein
Fix the race on bp->stats_pending between the timer and a LINK_UP event
handler.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_stats.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 4733c83..0df483d 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -158,6 +158,11 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp)
spin_lock_bh(&bp->stats_lock);
+ if (bp->stats_pending) {
+ spin_unlock_bh(&bp->stats_lock);
+ return;
+ }
+
ramrod_data.drv_counter = bp->stats_counter++;
ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
for_each_queue(bp, i)
--
1.7.0.4
^ permalink raw reply related
* [PATCH net-2.6 3/5] bnx2x: Move to D0 before clearing MSI/MSI-X configuration.
From: Vladislav Zolotarov @ 2011-01-09 12:20 UTC (permalink / raw)
To: Dave Miller; +Cc: netdev list, Eilon Greenstein
Move to D0 before clearing MSI/MSI-X configuration. Otherwise MSI/MSI-X
won't be cleared.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_main.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 2689f02..78cb2e0 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -9106,9 +9106,15 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
/* Delete all NAPI objects */
bnx2x_del_all_napi(bp);
+ /* Power on: we can't let PCI layer write to us while we are in D3 */
+ bnx2x_set_power_state(bp, PCI_D0);
+
/* Disable MSI/MSI-X */
bnx2x_disable_msi(bp);
+ /* Power off */
+ bnx2x_set_power_state(bp, PCI_D3hot);
+
/* Make sure RESET task is not scheduled before continuing */
cancel_delayed_work_sync(&bp->reset_task);
--
1.7.0.4
^ permalink raw reply related
* [PATCH net-2.6 2/5] bnx2x: registers dump fixes
From: Vladislav Zolotarov @ 2011-01-09 12:20 UTC (permalink / raw)
To: Dave Miller; +Cc: netdev list, Eilon Greenstein
Fixes in registers dump:
- Properly calculate dump length for 57712.
- Prevent HW blocks parity attentions when dumping registers in order to
prevent false parity errors handling.
- Update the bnx2x_dump.h file: old one had a few bugs that could cause
fatal HW error as a result of a registers dump.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x.h | 1 +
drivers/net/bnx2x/bnx2x_dump.h | 988 +++++++++++++++++++++----------------
drivers/net/bnx2x/bnx2x_ethtool.c | 22 +-
drivers/net/bnx2x/bnx2x_init.h | 220 ++++++++
drivers/net/bnx2x/bnx2x_main.c | 57 +--
drivers/net/bnx2x/bnx2x_reg.h | 74 +++
6 files changed, 891 insertions(+), 471 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index d255428..8ee0ff1 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -598,6 +598,7 @@ struct bnx2x_common {
#define CHIP_METAL(bp) (bp->common.chip_id & 0x00000ff0)
#define CHIP_BOND_ID(bp) (bp->common.chip_id & 0x0000000f)
+#define CHIP_PARITY_ENABLED(bp) (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
int flash_size;
#define NVRAM_1MB_SIZE 0x20000 /* 1M bit in bytes */
diff --git a/drivers/net/bnx2x/bnx2x_dump.h b/drivers/net/bnx2x/bnx2x_dump.h
index dc18c25..fb3ff7c 100644
--- a/drivers/net/bnx2x/bnx2x_dump.h
+++ b/drivers/net/bnx2x/bnx2x_dump.h
@@ -1,10 +1,16 @@
/* bnx2x_dump.h: Broadcom Everest network driver.
*
- * Copyright (c) 2009 Broadcom Corporation
+ * Copyright (c) 2011 Broadcom Corporation
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
*/
@@ -17,53 +23,53 @@
#define BNX2X_DUMP_H
-struct dump_sign {
- u32 time_stamp;
- u32 diag_ver;
- u32 grc_dump_ver;
-};
-#define TSTORM_WAITP_ADDR 0x1b8a80
-#define CSTORM_WAITP_ADDR 0x238a80
-#define XSTORM_WAITP_ADDR 0x2b8a80
-#define USTORM_WAITP_ADDR 0x338a80
-#define TSTORM_CAM_MODE 0x1b1440
+/*definitions */
+#define XSTORM_WAITP_ADDR 0x2b8a80
+#define TSTORM_WAITP_ADDR 0x1b8a80
+#define USTORM_WAITP_ADDR 0x338a80
+#define CSTORM_WAITP_ADDR 0x238a80
+#define TSTORM_CAM_MODE 0x1B1440
-#define RI_E1 0x1
-#define RI_E1H 0x2
+#define MAX_TIMER_PENDING 200
+#define TIMER_SCAN_DONT_CARE 0xFF
+#define RI_E1 0x1
+#define RI_E1H 0x2
#define RI_E2 0x4
-#define RI_ONLINE 0x100
+#define RI_ONLINE 0x100
#define RI_PATH0_DUMP 0x200
#define RI_PATH1_DUMP 0x400
-#define RI_E1_OFFLINE (RI_E1)
-#define RI_E1_ONLINE (RI_E1 | RI_ONLINE)
-#define RI_E1H_OFFLINE (RI_E1H)
-#define RI_E1H_ONLINE (RI_E1H | RI_ONLINE)
-#define RI_E2_OFFLINE (RI_E2)
-#define RI_E2_ONLINE (RI_E2 | RI_ONLINE)
-#define RI_E1E1H_OFFLINE (RI_E1 | RI_E1H)
-#define RI_E1E1H_ONLINE (RI_E1 | RI_E1H | RI_ONLINE)
-#define RI_E1HE2_OFFLINE (RI_E2 | RI_E1H)
-#define RI_E1HE2_ONLINE (RI_E2 | RI_E1H | RI_ONLINE)
-#define RI_E1E2_OFFLINE (RI_E2 | RI_E1)
-#define RI_E1E2_ONLINE (RI_E2 | RI_E1 | RI_ONLINE)
-#define RI_ALL_OFFLINE (RI_E1 | RI_E1H | RI_E2)
-#define RI_ALL_ONLINE (RI_E1 | RI_E1H | RI_E2 | RI_ONLINE)
-
-#define MAX_TIMER_PENDING 200
-#define TIMER_SCAN_DONT_CARE 0xFF
+#define RI_E1_OFFLINE (RI_E1)
+#define RI_E1_ONLINE (RI_E1 | RI_ONLINE)
+#define RI_E1H_OFFLINE (RI_E1H)
+#define RI_E1H_ONLINE (RI_E1H | RI_ONLINE)
+#define RI_E2_OFFLINE (RI_E2)
+#define RI_E2_ONLINE (RI_E2 | RI_ONLINE)
+#define RI_E1E1H_OFFLINE (RI_E1 | RI_E1H)
+#define RI_E1E1H_ONLINE (RI_E1 | RI_E1H | RI_ONLINE)
+#define RI_E1HE2_OFFLINE (RI_E2 | RI_E1H)
+#define RI_E1HE2_ONLINE (RI_E2 | RI_E1H | RI_ONLINE)
+#define RI_E1E2_OFFLINE (RI_E2 | RI_E1)
+#define RI_E1E2_ONLINE (RI_E2 | RI_E1 | RI_ONLINE)
+#define RI_ALL_OFFLINE (RI_E1 | RI_E1H | RI_E2)
+#define RI_ALL_ONLINE (RI_E1 | RI_E1H | RI_E2 | RI_ONLINE)
+struct dump_sign {
+ u32 time_stamp;
+ u32 diag_ver;
+ u32 grc_dump_ver;
+};
struct dump_hdr {
- u32 hdr_size; /* in dwords, excluding this field */
- struct dump_sign dump_sign;
- u32 xstorm_waitp;
- u32 tstorm_waitp;
- u32 ustorm_waitp;
- u32 cstorm_waitp;
- u16 info;
- u8 idle_chk;
- u8 reserved;
+ u32 hdr_size; /* in dwords, excluding this field */
+ struct dump_sign dump_sign;
+ u32 xstorm_waitp;
+ u32 tstorm_waitp;
+ u32 ustorm_waitp;
+ u32 cstorm_waitp;
+ u16 info;
+ u8 idle_chk;
+ u8 reserved;
};
struct reg_addr {
@@ -80,202 +86,185 @@ struct wreg_addr {
u16 info;
};
-
-#define REGS_COUNT 558
+#define REGS_COUNT 834
static const struct reg_addr reg_addrs[REGS_COUNT] = {
{ 0x2000, 341, RI_ALL_ONLINE }, { 0x2800, 103, RI_ALL_ONLINE },
{ 0x3000, 287, RI_ALL_ONLINE }, { 0x3800, 331, RI_ALL_ONLINE },
- { 0x8800, 6, RI_E1_ONLINE }, { 0xa000, 223, RI_ALL_ONLINE },
- { 0xa388, 1, RI_ALL_ONLINE }, { 0xa398, 1, RI_ALL_ONLINE },
- { 0xa39c, 7, RI_E1H_ONLINE }, { 0xa3c0, 3, RI_E1H_ONLINE },
- { 0xa3d0, 1, RI_E1H_ONLINE }, { 0xa3d8, 1, RI_E1H_ONLINE },
- { 0xa3e0, 1, RI_E1H_ONLINE }, { 0xa3e8, 1, RI_E1H_ONLINE },
- { 0xa3f0, 1, RI_E1H_ONLINE }, { 0xa3f8, 1, RI_E1H_ONLINE },
- { 0xa400, 69, RI_ALL_ONLINE }, { 0xa518, 1, RI_ALL_ONLINE },
- { 0xa520, 1, RI_ALL_ONLINE }, { 0xa528, 1, RI_ALL_ONLINE },
- { 0xa530, 1, RI_ALL_ONLINE }, { 0xa538, 1, RI_ALL_ONLINE },
- { 0xa540, 1, RI_ALL_ONLINE }, { 0xa548, 1, RI_ALL_ONLINE },
- { 0xa550, 1, RI_ALL_ONLINE }, { 0xa558, 1, RI_ALL_ONLINE },
- { 0xa560, 1, RI_ALL_ONLINE }, { 0xa568, 1, RI_ALL_ONLINE },
- { 0xa570, 1, RI_ALL_ONLINE }, { 0xa580, 1, RI_ALL_ONLINE },
- { 0xa590, 1, RI_ALL_ONLINE }, { 0xa5a0, 1, RI_ALL_ONLINE },
- { 0xa5c0, 1, RI_ALL_ONLINE }, { 0xa5e0, 1, RI_E1H_ONLINE },
- { 0xa5e8, 1, RI_E1H_ONLINE }, { 0xa5f0, 1, RI_E1H_ONLINE },
- { 0xa5f8, 10, RI_E1H_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
- { 0x103bc, 1, RI_ALL_ONLINE }, { 0x103cc, 1, RI_ALL_ONLINE },
- { 0x103dc, 1, RI_ALL_ONLINE }, { 0x10400, 57, RI_ALL_ONLINE },
- { 0x104e8, 2, RI_ALL_ONLINE }, { 0x104f4, 2, RI_ALL_ONLINE },
- { 0x10500, 146, RI_ALL_ONLINE }, { 0x10750, 2, RI_ALL_ONLINE },
- { 0x10760, 2, RI_ALL_ONLINE }, { 0x10770, 2, RI_ALL_ONLINE },
- { 0x10780, 2, RI_ALL_ONLINE }, { 0x10790, 2, RI_ALL_ONLINE },
- { 0x107a0, 2, RI_ALL_ONLINE }, { 0x107b0, 2, RI_ALL_ONLINE },
- { 0x107c0, 2, RI_ALL_ONLINE }, { 0x107d0, 2, RI_ALL_ONLINE },
- { 0x107e0, 2, RI_ALL_ONLINE }, { 0x10880, 2, RI_ALL_ONLINE },
- { 0x10900, 2, RI_ALL_ONLINE }, { 0x12000, 1, RI_ALL_ONLINE },
- { 0x14000, 1, RI_ALL_ONLINE }, { 0x16000, 26, RI_E1H_ONLINE },
- { 0x16070, 18, RI_E1H_ONLINE }, { 0x160c0, 27, RI_E1H_ONLINE },
- { 0x16140, 1, RI_E1H_ONLINE }, { 0x16160, 1, RI_E1H_ONLINE },
- { 0x16180, 2, RI_E1H_ONLINE }, { 0x161c0, 2, RI_E1H_ONLINE },
- { 0x16204, 5, RI_E1H_ONLINE }, { 0x18000, 1, RI_E1H_ONLINE },
- { 0x18008, 1, RI_E1H_ONLINE }, { 0x20000, 24, RI_ALL_ONLINE },
- { 0x20060, 8, RI_ALL_ONLINE }, { 0x20080, 138, RI_ALL_ONLINE },
- { 0x202b4, 1, RI_ALL_ONLINE }, { 0x202c4, 1, RI_ALL_ONLINE },
- { 0x20400, 2, RI_ALL_ONLINE }, { 0x2040c, 8, RI_ALL_ONLINE },
- { 0x2042c, 18, RI_E1H_ONLINE }, { 0x20480, 1, RI_ALL_ONLINE },
- { 0x20500, 1, RI_ALL_ONLINE }, { 0x20600, 1, RI_ALL_ONLINE },
- { 0x28000, 1, RI_ALL_ONLINE }, { 0x28004, 8191, RI_ALL_OFFLINE },
- { 0x30000, 1, RI_ALL_ONLINE }, { 0x30004, 16383, RI_ALL_OFFLINE },
- { 0x40000, 98, RI_ALL_ONLINE }, { 0x40194, 1, RI_ALL_ONLINE },
- { 0x401a4, 1, RI_ALL_ONLINE }, { 0x401a8, 11, RI_E1H_ONLINE },
- { 0x40200, 4, RI_ALL_ONLINE }, { 0x40400, 43, RI_ALL_ONLINE },
- { 0x404b8, 1, RI_ALL_ONLINE }, { 0x404c8, 1, RI_ALL_ONLINE },
- { 0x404cc, 3, RI_E1H_ONLINE }, { 0x40500, 2, RI_ALL_ONLINE },
+ { 0x8800, 6, RI_ALL_ONLINE }, { 0x8818, 1, RI_E1HE2_ONLINE },
+ { 0x9000, 164, RI_E2_ONLINE }, { 0x9400, 33, RI_E2_ONLINE },
+ { 0xa000, 27, RI_ALL_ONLINE }, { 0xa06c, 1, RI_E1E1H_ONLINE },
+ { 0xa070, 71, RI_ALL_ONLINE }, { 0xa18c, 4, RI_E1E1H_ONLINE },
+ { 0xa19c, 62, RI_ALL_ONLINE }, { 0xa294, 2, RI_E1E1H_ONLINE },
+ { 0xa29c, 56, RI_ALL_ONLINE }, { 0xa39c, 7, RI_E1HE2_ONLINE },
+ { 0xa3c0, 3, RI_E1HE2_ONLINE }, { 0xa3d0, 1, RI_E1HE2_ONLINE },
+ { 0xa3d8, 1, RI_E1HE2_ONLINE }, { 0xa3e0, 1, RI_E1HE2_ONLINE },
+ { 0xa3e8, 1, RI_E1HE2_ONLINE }, { 0xa3f0, 1, RI_E1HE2_ONLINE },
+ { 0xa3f8, 1, RI_E1HE2_ONLINE }, { 0xa400, 43, RI_ALL_ONLINE },
+ { 0xa4ac, 2, RI_E1E1H_ONLINE }, { 0xa4b4, 1, RI_ALL_ONLINE },
+ { 0xa4b8, 2, RI_E1E1H_ONLINE }, { 0xa4c0, 3, RI_ALL_ONLINE },
+ { 0xa4cc, 5, RI_E1E1H_ONLINE }, { 0xa4e0, 9, RI_ALL_ONLINE },
+ { 0xa504, 1, RI_E1E1H_ONLINE }, { 0xa508, 3, RI_ALL_ONLINE },
+ { 0xa518, 1, RI_ALL_ONLINE }, { 0xa520, 1, RI_ALL_ONLINE },
+ { 0xa528, 1, RI_ALL_ONLINE }, { 0xa530, 1, RI_ALL_ONLINE },
+ { 0xa538, 1, RI_ALL_ONLINE }, { 0xa540, 1, RI_ALL_ONLINE },
+ { 0xa548, 1, RI_E1E1H_ONLINE }, { 0xa550, 1, RI_E1E1H_ONLINE },
+ { 0xa558, 1, RI_E1E1H_ONLINE }, { 0xa560, 1, RI_E1E1H_ONLINE },
+ { 0xa568, 1, RI_E1E1H_ONLINE }, { 0xa570, 1, RI_ALL_ONLINE },
+ { 0xa580, 1, RI_ALL_ONLINE }, { 0xa590, 1, RI_ALL_ONLINE },
+ { 0xa5a0, 1, RI_ALL_ONLINE }, { 0xa5c0, 1, RI_ALL_ONLINE },
+ { 0xa5e0, 1, RI_E1HE2_ONLINE }, { 0xa5e8, 1, RI_E1HE2_ONLINE },
+ { 0xa5f0, 1, RI_E1HE2_ONLINE }, { 0xa5f8, 10, RI_E1HE2_ONLINE },
+ { 0xa620, 111, RI_E2_ONLINE }, { 0xa800, 51, RI_E2_ONLINE },
+ { 0xa8d4, 4, RI_E2_ONLINE }, { 0xa8e8, 1, RI_E2_ONLINE },
+ { 0xa8f0, 1, RI_E2_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
+ { 0x10400, 57, RI_ALL_ONLINE }, { 0x104e8, 2, RI_ALL_ONLINE },
+ { 0x104f4, 2, RI_ALL_ONLINE }, { 0x10500, 146, RI_ALL_ONLINE },
+ { 0x10750, 2, RI_ALL_ONLINE }, { 0x10760, 2, RI_ALL_ONLINE },
+ { 0x10770, 2, RI_ALL_ONLINE }, { 0x10780, 2, RI_ALL_ONLINE },
+ { 0x10790, 2, RI_ALL_ONLINE }, { 0x107a0, 2, RI_ALL_ONLINE },
+ { 0x107b0, 2, RI_ALL_ONLINE }, { 0x107c0, 2, RI_ALL_ONLINE },
+ { 0x107d0, 2, RI_ALL_ONLINE }, { 0x107e0, 2, RI_ALL_ONLINE },
+ { 0x10880, 2, RI_ALL_ONLINE }, { 0x10900, 2, RI_ALL_ONLINE },
+ { 0x16000, 26, RI_E1HE2_ONLINE }, { 0x16070, 18, RI_E1HE2_ONLINE },
+ { 0x160c0, 27, RI_E1HE2_ONLINE }, { 0x16140, 1, RI_E1HE2_ONLINE },
+ { 0x16160, 1, RI_E1HE2_ONLINE }, { 0x16180, 2, RI_E1HE2_ONLINE },
+ { 0x161c0, 2, RI_E1HE2_ONLINE }, { 0x16204, 5, RI_E1HE2_ONLINE },
+ { 0x18000, 1, RI_E1HE2_ONLINE }, { 0x18008, 1, RI_E1HE2_ONLINE },
+ { 0x18010, 35, RI_E2_ONLINE }, { 0x180a4, 2, RI_E2_ONLINE },
+ { 0x180c0, 191, RI_E2_ONLINE }, { 0x18440, 1, RI_E2_ONLINE },
+ { 0x18460, 1, RI_E2_ONLINE }, { 0x18480, 2, RI_E2_ONLINE },
+ { 0x184c0, 2, RI_E2_ONLINE }, { 0x18500, 15, RI_E2_ONLINE },
+ { 0x20000, 24, RI_ALL_ONLINE }, { 0x20060, 8, RI_ALL_ONLINE },
+ { 0x20080, 94, RI_ALL_ONLINE }, { 0x201f8, 1, RI_E1E1H_ONLINE },
+ { 0x201fc, 1, RI_ALL_ONLINE }, { 0x20200, 1, RI_E1E1H_ONLINE },
+ { 0x20204, 1, RI_ALL_ONLINE }, { 0x20208, 1, RI_E1E1H_ONLINE },
+ { 0x2020c, 39, RI_ALL_ONLINE }, { 0x202c8, 1, RI_E2_ONLINE },
+ { 0x202d8, 4, RI_E2_ONLINE }, { 0x20400, 2, RI_ALL_ONLINE },
+ { 0x2040c, 8, RI_ALL_ONLINE }, { 0x2042c, 18, RI_E1HE2_ONLINE },
+ { 0x20480, 1, RI_ALL_ONLINE }, { 0x20500, 1, RI_ALL_ONLINE },
+ { 0x20600, 1, RI_ALL_ONLINE }, { 0x28000, 1, RI_ALL_ONLINE },
+ { 0x28004, 8191, RI_ALL_OFFLINE }, { 0x30000, 1, RI_ALL_ONLINE },
+ { 0x30004, 16383, RI_ALL_OFFLINE }, { 0x40000, 98, RI_ALL_ONLINE },
+ { 0x401a8, 8, RI_E1HE2_ONLINE }, { 0x401c8, 1, RI_E1H_ONLINE },
+ { 0x401cc, 2, RI_E1HE2_ONLINE }, { 0x401d4, 2, RI_E2_ONLINE },
+ { 0x40200, 4, RI_ALL_ONLINE }, { 0x40220, 18, RI_E2_ONLINE },
+ { 0x40400, 43, RI_ALL_ONLINE }, { 0x404cc, 3, RI_E1HE2_ONLINE },
+ { 0x404e0, 1, RI_E2_ONLINE }, { 0x40500, 2, RI_ALL_ONLINE },
{ 0x40510, 2, RI_ALL_ONLINE }, { 0x40520, 2, RI_ALL_ONLINE },
{ 0x40530, 2, RI_ALL_ONLINE }, { 0x40540, 2, RI_ALL_ONLINE },
- { 0x42000, 164, RI_ALL_ONLINE }, { 0x4229c, 1, RI_ALL_ONLINE },
- { 0x422ac, 1, RI_ALL_ONLINE }, { 0x422bc, 1, RI_ALL_ONLINE },
- { 0x422d4, 5, RI_E1H_ONLINE }, { 0x42400, 49, RI_ALL_ONLINE },
- { 0x424c8, 38, RI_ALL_ONLINE }, { 0x42568, 2, RI_ALL_ONLINE },
- { 0x42800, 1, RI_ALL_ONLINE }, { 0x50000, 20, RI_ALL_ONLINE },
- { 0x50050, 8, RI_ALL_ONLINE }, { 0x50070, 88, RI_ALL_ONLINE },
- { 0x501dc, 1, RI_ALL_ONLINE }, { 0x501ec, 1, RI_ALL_ONLINE },
- { 0x501f0, 4, RI_E1H_ONLINE }, { 0x50200, 2, RI_ALL_ONLINE },
- { 0x5020c, 7, RI_ALL_ONLINE }, { 0x50228, 6, RI_E1H_ONLINE },
- { 0x50240, 1, RI_ALL_ONLINE }, { 0x50280, 1, RI_ALL_ONLINE },
+ { 0x40550, 10, RI_E2_ONLINE }, { 0x40610, 2, RI_E2_ONLINE },
+ { 0x42000, 164, RI_ALL_ONLINE }, { 0x422c0, 4, RI_E2_ONLINE },
+ { 0x422d4, 5, RI_E1HE2_ONLINE }, { 0x422e8, 1, RI_E2_ONLINE },
+ { 0x42400, 49, RI_ALL_ONLINE }, { 0x424c8, 38, RI_ALL_ONLINE },
+ { 0x42568, 2, RI_ALL_ONLINE }, { 0x42640, 5, RI_E2_ONLINE },
+ { 0x42800, 1, RI_ALL_ONLINE }, { 0x50000, 1, RI_ALL_ONLINE },
+ { 0x50004, 19, RI_ALL_ONLINE }, { 0x50050, 8, RI_ALL_ONLINE },
+ { 0x50070, 88, RI_ALL_ONLINE }, { 0x501f0, 4, RI_E1HE2_ONLINE },
+ { 0x50200, 2, RI_ALL_ONLINE }, { 0x5020c, 7, RI_ALL_ONLINE },
+ { 0x50228, 6, RI_E1HE2_ONLINE }, { 0x50240, 1, RI_ALL_ONLINE },
+ { 0x50280, 1, RI_ALL_ONLINE }, { 0x50300, 1, RI_E2_ONLINE },
+ { 0x5030c, 1, RI_E2_ONLINE }, { 0x50318, 1, RI_E2_ONLINE },
+ { 0x5031c, 1, RI_E2_ONLINE }, { 0x50320, 2, RI_E2_ONLINE },
{ 0x52000, 1, RI_ALL_ONLINE }, { 0x54000, 1, RI_ALL_ONLINE },
{ 0x54004, 3327, RI_ALL_OFFLINE }, { 0x58000, 1, RI_ALL_ONLINE },
- { 0x58004, 8191, RI_ALL_OFFLINE }, { 0x60000, 71, RI_ALL_ONLINE },
- { 0x60128, 1, RI_ALL_ONLINE }, { 0x60138, 1, RI_ALL_ONLINE },
- { 0x6013c, 24, RI_E1H_ONLINE }, { 0x60200, 1, RI_ALL_ONLINE },
+ { 0x58004, 8191, RI_E1E1H_OFFLINE }, { 0x60000, 26, RI_ALL_ONLINE },
+ { 0x60068, 8, RI_E1E1H_ONLINE }, { 0x60088, 12, RI_ALL_ONLINE },
+ { 0x600b8, 9, RI_E1E1H_ONLINE }, { 0x600dc, 1, RI_ALL_ONLINE },
+ { 0x600e0, 5, RI_E1E1H_ONLINE }, { 0x600f4, 1, RI_ALL_ONLINE },
+ { 0x600f8, 1, RI_E1E1H_ONLINE }, { 0x600fc, 8, RI_ALL_ONLINE },
+ { 0x6013c, 24, RI_E1H_ONLINE }, { 0x6019c, 2, RI_E2_ONLINE },
+ { 0x601ac, 18, RI_E2_ONLINE }, { 0x60200, 1, RI_ALL_ONLINE },
+ { 0x60204, 2, RI_ALL_OFFLINE }, { 0x60210, 13, RI_E2_ONLINE },
{ 0x61000, 1, RI_ALL_ONLINE }, { 0x61004, 511, RI_ALL_OFFLINE },
- { 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 21496, RI_ALL_OFFLINE },
- { 0x85000, 3, RI_ALL_ONLINE }, { 0x8500c, 4, RI_ALL_OFFLINE },
- { 0x8501c, 7, RI_ALL_ONLINE }, { 0x85038, 4, RI_ALL_OFFLINE },
- { 0x85048, 1, RI_ALL_ONLINE }, { 0x8504c, 109, RI_ALL_OFFLINE },
- { 0x85200, 32, RI_ALL_ONLINE }, { 0x85280, 11104, RI_ALL_OFFLINE },
- { 0xa0000, 16384, RI_ALL_ONLINE }, { 0xb0000, 16384, RI_E1H_ONLINE },
- { 0xc1000, 7, RI_ALL_ONLINE }, { 0xc1028, 1, RI_ALL_ONLINE },
- { 0xc1038, 1, RI_ALL_ONLINE }, { 0xc1800, 2, RI_ALL_ONLINE },
- { 0xc2000, 164, RI_ALL_ONLINE }, { 0xc229c, 1, RI_ALL_ONLINE },
- { 0xc22ac, 1, RI_ALL_ONLINE }, { 0xc22bc, 1, RI_ALL_ONLINE },
+ { 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 8184, RI_ALL_OFFLINE },
+ { 0x85000, 3, RI_ALL_ONLINE }, { 0x8501c, 7, RI_ALL_ONLINE },
+ { 0x85048, 1, RI_ALL_ONLINE }, { 0x85200, 32, RI_ALL_ONLINE },
+ { 0xc1000, 7, RI_ALL_ONLINE }, { 0xc103c, 2, RI_E2_ONLINE },
+ { 0xc1800, 2, RI_ALL_ONLINE }, { 0xc2000, 164, RI_ALL_ONLINE },
+ { 0xc22c0, 5, RI_E2_ONLINE }, { 0xc22d8, 4, RI_E2_ONLINE },
{ 0xc2400, 49, RI_ALL_ONLINE }, { 0xc24c8, 38, RI_ALL_ONLINE },
{ 0xc2568, 2, RI_ALL_ONLINE }, { 0xc2600, 1, RI_ALL_ONLINE },
- { 0xc4000, 165, RI_ALL_ONLINE }, { 0xc42a0, 1, RI_ALL_ONLINE },
- { 0xc42b0, 1, RI_ALL_ONLINE }, { 0xc42c0, 1, RI_ALL_ONLINE },
- { 0xc42e0, 7, RI_E1H_ONLINE }, { 0xc4400, 51, RI_ALL_ONLINE },
- { 0xc44d0, 38, RI_ALL_ONLINE }, { 0xc4570, 2, RI_ALL_ONLINE },
+ { 0xc4000, 165, RI_ALL_ONLINE }, { 0xc42d8, 2, RI_E2_ONLINE },
+ { 0xc42e0, 7, RI_E1HE2_ONLINE }, { 0xc42fc, 1, RI_E2_ONLINE },
+ { 0xc4400, 51, RI_ALL_ONLINE }, { 0xc44d0, 38, RI_ALL_ONLINE },
+ { 0xc4570, 2, RI_ALL_ONLINE }, { 0xc4578, 5, RI_E2_ONLINE },
{ 0xc4600, 1, RI_ALL_ONLINE }, { 0xd0000, 19, RI_ALL_ONLINE },
{ 0xd004c, 8, RI_ALL_ONLINE }, { 0xd006c, 91, RI_ALL_ONLINE },
- { 0xd01e4, 1, RI_ALL_ONLINE }, { 0xd01f4, 1, RI_ALL_ONLINE },
- { 0xd0200, 2, RI_ALL_ONLINE }, { 0xd020c, 7, RI_ALL_ONLINE },
- { 0xd0228, 18, RI_E1H_ONLINE }, { 0xd0280, 1, RI_ALL_ONLINE },
- { 0xd0300, 1, RI_ALL_ONLINE }, { 0xd0400, 1, RI_ALL_ONLINE },
- { 0xd4000, 1, RI_ALL_ONLINE }, { 0xd4004, 2559, RI_ALL_OFFLINE },
- { 0xd8000, 1, RI_ALL_ONLINE }, { 0xd8004, 8191, RI_ALL_OFFLINE },
- { 0xe0000, 21, RI_ALL_ONLINE }, { 0xe0054, 8, RI_ALL_ONLINE },
- { 0xe0074, 85, RI_ALL_ONLINE }, { 0xe01d4, 1, RI_ALL_ONLINE },
- { 0xe01e4, 1, RI_ALL_ONLINE }, { 0xe0200, 2, RI_ALL_ONLINE },
- { 0xe020c, 8, RI_ALL_ONLINE }, { 0xe022c, 18, RI_E1H_ONLINE },
+ { 0xd01fc, 1, RI_E2_ONLINE }, { 0xd0200, 2, RI_ALL_ONLINE },
+ { 0xd020c, 7, RI_ALL_ONLINE }, { 0xd0228, 18, RI_E1HE2_ONLINE },
+ { 0xd0280, 1, RI_ALL_ONLINE }, { 0xd0300, 1, RI_ALL_ONLINE },
+ { 0xd0400, 1, RI_ALL_ONLINE }, { 0xd4000, 1, RI_ALL_ONLINE },
+ { 0xd4004, 2559, RI_ALL_OFFLINE }, { 0xd8000, 1, RI_ALL_ONLINE },
+ { 0xd8004, 8191, RI_ALL_OFFLINE }, { 0xe0000, 21, RI_ALL_ONLINE },
+ { 0xe0054, 8, RI_ALL_ONLINE }, { 0xe0074, 49, RI_ALL_ONLINE },
+ { 0xe0138, 1, RI_E1E1H_ONLINE }, { 0xe013c, 35, RI_ALL_ONLINE },
+ { 0xe01f4, 2, RI_E2_ONLINE }, { 0xe0200, 2, RI_ALL_ONLINE },
+ { 0xe020c, 8, RI_ALL_ONLINE }, { 0xe022c, 18, RI_E1HE2_ONLINE },
{ 0xe0280, 1, RI_ALL_ONLINE }, { 0xe0300, 1, RI_ALL_ONLINE },
{ 0xe1000, 1, RI_ALL_ONLINE }, { 0xe2000, 1, RI_ALL_ONLINE },
{ 0xe2004, 2047, RI_ALL_OFFLINE }, { 0xf0000, 1, RI_ALL_ONLINE },
{ 0xf0004, 16383, RI_ALL_OFFLINE }, { 0x101000, 12, RI_ALL_ONLINE },
- { 0x10103c, 1, RI_ALL_ONLINE }, { 0x10104c, 1, RI_ALL_ONLINE },
- { 0x101050, 1, RI_E1H_ONLINE }, { 0x101100, 1, RI_ALL_ONLINE },
- { 0x101800, 8, RI_ALL_ONLINE }, { 0x102000, 18, RI_ALL_ONLINE },
- { 0x102054, 1, RI_ALL_ONLINE }, { 0x102064, 1, RI_ALL_ONLINE },
+ { 0x101050, 1, RI_E1HE2_ONLINE }, { 0x101054, 3, RI_E2_ONLINE },
+ { 0x101100, 1, RI_ALL_ONLINE }, { 0x101800, 8, RI_ALL_ONLINE },
+ { 0x102000, 18, RI_ALL_ONLINE }, { 0x102068, 6, RI_E2_ONLINE },
{ 0x102080, 17, RI_ALL_ONLINE }, { 0x1020c8, 8, RI_E1H_ONLINE },
- { 0x102400, 1, RI_ALL_ONLINE }, { 0x103000, 26, RI_ALL_ONLINE },
- { 0x103074, 1, RI_ALL_ONLINE }, { 0x103084, 1, RI_ALL_ONLINE },
- { 0x103094, 1, RI_ALL_ONLINE }, { 0x103098, 5, RI_E1H_ONLINE },
+ { 0x1020e8, 9, RI_E2_ONLINE }, { 0x102400, 1, RI_ALL_ONLINE },
+ { 0x103000, 26, RI_ALL_ONLINE }, { 0x103098, 5, RI_E1HE2_ONLINE },
+ { 0x1030ac, 10, RI_E2_ONLINE }, { 0x1030d8, 8, RI_E2_ONLINE },
+ { 0x103400, 1, RI_E2_ONLINE }, { 0x103404, 135, RI_E2_OFFLINE },
{ 0x103800, 8, RI_ALL_ONLINE }, { 0x104000, 63, RI_ALL_ONLINE },
- { 0x104108, 1, RI_ALL_ONLINE }, { 0x104118, 1, RI_ALL_ONLINE },
- { 0x104200, 17, RI_ALL_ONLINE }, { 0x104400, 64, RI_ALL_ONLINE },
- { 0x104500, 192, RI_ALL_OFFLINE }, { 0x104800, 64, RI_ALL_ONLINE },
- { 0x104900, 192, RI_ALL_OFFLINE }, { 0x105000, 7, RI_ALL_ONLINE },
- { 0x10501c, 1, RI_ALL_OFFLINE }, { 0x105020, 3, RI_ALL_ONLINE },
- { 0x10502c, 1, RI_ALL_OFFLINE }, { 0x105030, 3, RI_ALL_ONLINE },
- { 0x10503c, 1, RI_ALL_OFFLINE }, { 0x105040, 3, RI_ALL_ONLINE },
- { 0x10504c, 1, RI_ALL_OFFLINE }, { 0x105050, 3, RI_ALL_ONLINE },
- { 0x10505c, 1, RI_ALL_OFFLINE }, { 0x105060, 3, RI_ALL_ONLINE },
- { 0x10506c, 1, RI_ALL_OFFLINE }, { 0x105070, 3, RI_ALL_ONLINE },
- { 0x10507c, 1, RI_ALL_OFFLINE }, { 0x105080, 3, RI_ALL_ONLINE },
- { 0x10508c, 1, RI_ALL_OFFLINE }, { 0x105090, 3, RI_ALL_ONLINE },
- { 0x10509c, 1, RI_ALL_OFFLINE }, { 0x1050a0, 3, RI_ALL_ONLINE },
- { 0x1050ac, 1, RI_ALL_OFFLINE }, { 0x1050b0, 3, RI_ALL_ONLINE },
- { 0x1050bc, 1, RI_ALL_OFFLINE }, { 0x1050c0, 3, RI_ALL_ONLINE },
- { 0x1050cc, 1, RI_ALL_OFFLINE }, { 0x1050d0, 3, RI_ALL_ONLINE },
- { 0x1050dc, 1, RI_ALL_OFFLINE }, { 0x1050e0, 3, RI_ALL_ONLINE },
- { 0x1050ec, 1, RI_ALL_OFFLINE }, { 0x1050f0, 3, RI_ALL_ONLINE },
- { 0x1050fc, 1, RI_ALL_OFFLINE }, { 0x105100, 3, RI_ALL_ONLINE },
- { 0x10510c, 1, RI_ALL_OFFLINE }, { 0x105110, 3, RI_ALL_ONLINE },
- { 0x10511c, 1, RI_ALL_OFFLINE }, { 0x105120, 3, RI_ALL_ONLINE },
- { 0x10512c, 1, RI_ALL_OFFLINE }, { 0x105130, 3, RI_ALL_ONLINE },
- { 0x10513c, 1, RI_ALL_OFFLINE }, { 0x105140, 3, RI_ALL_ONLINE },
- { 0x10514c, 1, RI_ALL_OFFLINE }, { 0x105150, 3, RI_ALL_ONLINE },
- { 0x10515c, 1, RI_ALL_OFFLINE }, { 0x105160, 3, RI_ALL_ONLINE },
- { 0x10516c, 1, RI_ALL_OFFLINE }, { 0x105170, 3, RI_ALL_ONLINE },
- { 0x10517c, 1, RI_ALL_OFFLINE }, { 0x105180, 3, RI_ALL_ONLINE },
- { 0x10518c, 1, RI_ALL_OFFLINE }, { 0x105190, 3, RI_ALL_ONLINE },
- { 0x10519c, 1, RI_ALL_OFFLINE }, { 0x1051a0, 3, RI_ALL_ONLINE },
- { 0x1051ac, 1, RI_ALL_OFFLINE }, { 0x1051b0, 3, RI_ALL_ONLINE },
- { 0x1051bc, 1, RI_ALL_OFFLINE }, { 0x1051c0, 3, RI_ALL_ONLINE },
- { 0x1051cc, 1, RI_ALL_OFFLINE }, { 0x1051d0, 3, RI_ALL_ONLINE },
- { 0x1051dc, 1, RI_ALL_OFFLINE }, { 0x1051e0, 3, RI_ALL_ONLINE },
- { 0x1051ec, 1, RI_ALL_OFFLINE }, { 0x1051f0, 3, RI_ALL_ONLINE },
- { 0x1051fc, 1, RI_ALL_OFFLINE }, { 0x105200, 3, RI_ALL_ONLINE },
- { 0x10520c, 1, RI_ALL_OFFLINE }, { 0x105210, 3, RI_ALL_ONLINE },
- { 0x10521c, 1, RI_ALL_OFFLINE }, { 0x105220, 3, RI_ALL_ONLINE },
- { 0x10522c, 1, RI_ALL_OFFLINE }, { 0x105230, 3, RI_ALL_ONLINE },
- { 0x10523c, 1, RI_ALL_OFFLINE }, { 0x105240, 3, RI_ALL_ONLINE },
- { 0x10524c, 1, RI_ALL_OFFLINE }, { 0x105250, 3, RI_ALL_ONLINE },
- { 0x10525c, 1, RI_ALL_OFFLINE }, { 0x105260, 3, RI_ALL_ONLINE },
- { 0x10526c, 1, RI_ALL_OFFLINE }, { 0x105270, 3, RI_ALL_ONLINE },
- { 0x10527c, 1, RI_ALL_OFFLINE }, { 0x105280, 3, RI_ALL_ONLINE },
- { 0x10528c, 1, RI_ALL_OFFLINE }, { 0x105290, 3, RI_ALL_ONLINE },
- { 0x10529c, 1, RI_ALL_OFFLINE }, { 0x1052a0, 3, RI_ALL_ONLINE },
- { 0x1052ac, 1, RI_ALL_OFFLINE }, { 0x1052b0, 3, RI_ALL_ONLINE },
- { 0x1052bc, 1, RI_ALL_OFFLINE }, { 0x1052c0, 3, RI_ALL_ONLINE },
- { 0x1052cc, 1, RI_ALL_OFFLINE }, { 0x1052d0, 3, RI_ALL_ONLINE },
- { 0x1052dc, 1, RI_ALL_OFFLINE }, { 0x1052e0, 3, RI_ALL_ONLINE },
- { 0x1052ec, 1, RI_ALL_OFFLINE }, { 0x1052f0, 3, RI_ALL_ONLINE },
- { 0x1052fc, 1, RI_ALL_OFFLINE }, { 0x105300, 3, RI_ALL_ONLINE },
- { 0x10530c, 1, RI_ALL_OFFLINE }, { 0x105310, 3, RI_ALL_ONLINE },
- { 0x10531c, 1, RI_ALL_OFFLINE }, { 0x105320, 3, RI_ALL_ONLINE },
- { 0x10532c, 1, RI_ALL_OFFLINE }, { 0x105330, 3, RI_ALL_ONLINE },
- { 0x10533c, 1, RI_ALL_OFFLINE }, { 0x105340, 3, RI_ALL_ONLINE },
- { 0x10534c, 1, RI_ALL_OFFLINE }, { 0x105350, 3, RI_ALL_ONLINE },
- { 0x10535c, 1, RI_ALL_OFFLINE }, { 0x105360, 3, RI_ALL_ONLINE },
- { 0x10536c, 1, RI_ALL_OFFLINE }, { 0x105370, 3, RI_ALL_ONLINE },
- { 0x10537c, 1, RI_ALL_OFFLINE }, { 0x105380, 3, RI_ALL_ONLINE },
- { 0x10538c, 1, RI_ALL_OFFLINE }, { 0x105390, 3, RI_ALL_ONLINE },
- { 0x10539c, 1, RI_ALL_OFFLINE }, { 0x1053a0, 3, RI_ALL_ONLINE },
- { 0x1053ac, 1, RI_ALL_OFFLINE }, { 0x1053b0, 3, RI_ALL_ONLINE },
- { 0x1053bc, 1, RI_ALL_OFFLINE }, { 0x1053c0, 3, RI_ALL_ONLINE },
- { 0x1053cc, 1, RI_ALL_OFFLINE }, { 0x1053d0, 3, RI_ALL_ONLINE },
- { 0x1053dc, 1, RI_ALL_OFFLINE }, { 0x1053e0, 3, RI_ALL_ONLINE },
- { 0x1053ec, 1, RI_ALL_OFFLINE }, { 0x1053f0, 3, RI_ALL_ONLINE },
- { 0x1053fc, 769, RI_ALL_OFFLINE }, { 0x108000, 33, RI_ALL_ONLINE },
- { 0x108090, 1, RI_ALL_ONLINE }, { 0x1080a0, 1, RI_ALL_ONLINE },
- { 0x1080ac, 5, RI_E1H_ONLINE }, { 0x108100, 5, RI_ALL_ONLINE },
- { 0x108120, 5, RI_ALL_ONLINE }, { 0x108200, 74, RI_ALL_ONLINE },
- { 0x108400, 74, RI_ALL_ONLINE }, { 0x108800, 152, RI_ALL_ONLINE },
- { 0x109000, 1, RI_ALL_ONLINE }, { 0x120000, 347, RI_ALL_ONLINE },
- { 0x120578, 1, RI_ALL_ONLINE }, { 0x120588, 1, RI_ALL_ONLINE },
- { 0x120598, 1, RI_ALL_ONLINE }, { 0x12059c, 23, RI_E1H_ONLINE },
- { 0x120614, 1, RI_E1H_ONLINE }, { 0x12061c, 30, RI_E1H_ONLINE },
- { 0x12080c, 65, RI_ALL_ONLINE }, { 0x120a00, 2, RI_ALL_ONLINE },
- { 0x122000, 2, RI_ALL_ONLINE }, { 0x128000, 2, RI_E1H_ONLINE },
- { 0x140000, 114, RI_ALL_ONLINE }, { 0x1401d4, 1, RI_ALL_ONLINE },
- { 0x1401e4, 1, RI_ALL_ONLINE }, { 0x140200, 6, RI_ALL_ONLINE },
- { 0x144000, 4, RI_ALL_ONLINE }, { 0x148000, 4, RI_ALL_ONLINE },
- { 0x14c000, 4, RI_ALL_ONLINE }, { 0x150000, 4, RI_ALL_ONLINE },
- { 0x154000, 4, RI_ALL_ONLINE }, { 0x158000, 4, RI_ALL_ONLINE },
- { 0x15c000, 7, RI_E1H_ONLINE }, { 0x161000, 7, RI_ALL_ONLINE },
- { 0x161028, 1, RI_ALL_ONLINE }, { 0x161038, 1, RI_ALL_ONLINE },
- { 0x161800, 2, RI_ALL_ONLINE }, { 0x164000, 60, RI_ALL_ONLINE },
- { 0x1640fc, 1, RI_ALL_ONLINE }, { 0x16410c, 1, RI_ALL_ONLINE },
- { 0x164110, 2, RI_E1H_ONLINE }, { 0x164200, 1, RI_ALL_ONLINE },
+ { 0x10411c, 16, RI_E2_ONLINE }, { 0x104200, 17, RI_ALL_ONLINE },
+ { 0x104400, 64, RI_ALL_ONLINE }, { 0x104500, 192, RI_ALL_OFFLINE },
+ { 0x104800, 64, RI_ALL_ONLINE }, { 0x104900, 192, RI_ALL_OFFLINE },
+ { 0x105000, 256, RI_ALL_ONLINE }, { 0x105400, 768, RI_ALL_OFFLINE },
+ { 0x107000, 7, RI_E2_ONLINE }, { 0x108000, 33, RI_E1E1H_ONLINE },
+ { 0x1080ac, 5, RI_E1H_ONLINE }, { 0x108100, 5, RI_E1E1H_ONLINE },
+ { 0x108120, 5, RI_E1E1H_ONLINE }, { 0x108200, 74, RI_E1E1H_ONLINE },
+ { 0x108400, 74, RI_E1E1H_ONLINE }, { 0x108800, 152, RI_E1E1H_ONLINE },
+ { 0x110000, 111, RI_E2_ONLINE }, { 0x110200, 4, RI_E2_ONLINE },
+ { 0x120000, 2, RI_ALL_ONLINE }, { 0x120008, 4, RI_ALL_ONLINE },
+ { 0x120018, 3, RI_ALL_ONLINE }, { 0x120024, 4, RI_ALL_ONLINE },
+ { 0x120034, 3, RI_ALL_ONLINE }, { 0x120040, 4, RI_ALL_ONLINE },
+ { 0x120050, 3, RI_ALL_ONLINE }, { 0x12005c, 4, RI_ALL_ONLINE },
+ { 0x12006c, 3, RI_ALL_ONLINE }, { 0x120078, 4, RI_ALL_ONLINE },
+ { 0x120088, 3, RI_ALL_ONLINE }, { 0x120094, 4, RI_ALL_ONLINE },
+ { 0x1200a4, 3, RI_ALL_ONLINE }, { 0x1200b0, 4, RI_ALL_ONLINE },
+ { 0x1200c0, 3, RI_ALL_ONLINE }, { 0x1200cc, 4, RI_ALL_ONLINE },
+ { 0x1200dc, 3, RI_ALL_ONLINE }, { 0x1200e8, 4, RI_ALL_ONLINE },
+ { 0x1200f8, 3, RI_ALL_ONLINE }, { 0x120104, 4, RI_ALL_ONLINE },
+ { 0x120114, 1, RI_ALL_ONLINE }, { 0x120118, 22, RI_ALL_ONLINE },
+ { 0x120170, 2, RI_E1E1H_ONLINE }, { 0x120178, 243, RI_ALL_ONLINE },
+ { 0x120544, 4, RI_E1E1H_ONLINE }, { 0x120554, 7, RI_ALL_ONLINE },
+ { 0x12059c, 6, RI_E1HE2_ONLINE }, { 0x1205b4, 1, RI_E1HE2_ONLINE },
+ { 0x1205b8, 16, RI_E1HE2_ONLINE }, { 0x1205f8, 4, RI_E2_ONLINE },
+ { 0x120618, 1, RI_E2_ONLINE }, { 0x12061c, 20, RI_E1HE2_ONLINE },
+ { 0x12066c, 11, RI_E1HE2_ONLINE }, { 0x120698, 5, RI_E2_ONLINE },
+ { 0x1206b0, 76, RI_E2_ONLINE }, { 0x1207fc, 1, RI_E2_ONLINE },
+ { 0x120808, 66, RI_ALL_ONLINE }, { 0x120910, 7, RI_E2_ONLINE },
+ { 0x120930, 9, RI_E2_ONLINE }, { 0x120a00, 2, RI_ALL_ONLINE },
+ { 0x122000, 2, RI_ALL_ONLINE }, { 0x122008, 2046, RI_E1_OFFLINE },
+ { 0x128000, 2, RI_E1HE2_ONLINE }, { 0x128008, 6142, RI_E1HE2_OFFLINE },
+ { 0x130000, 35, RI_E2_ONLINE }, { 0x130100, 29, RI_E2_ONLINE },
+ { 0x130180, 1, RI_E2_ONLINE }, { 0x130200, 1, RI_E2_ONLINE },
+ { 0x130280, 1, RI_E2_ONLINE }, { 0x130300, 5, RI_E2_ONLINE },
+ { 0x130380, 1, RI_E2_ONLINE }, { 0x130400, 1, RI_E2_ONLINE },
+ { 0x130480, 5, RI_E2_ONLINE }, { 0x130800, 72, RI_E2_ONLINE },
+ { 0x131000, 136, RI_E2_ONLINE }, { 0x132000, 148, RI_E2_ONLINE },
+ { 0x134000, 544, RI_E2_ONLINE }, { 0x140000, 64, RI_ALL_ONLINE },
+ { 0x140100, 5, RI_E1E1H_ONLINE }, { 0x140114, 45, RI_ALL_ONLINE },
+ { 0x140200, 6, RI_ALL_ONLINE }, { 0x140220, 4, RI_E2_ONLINE },
+ { 0x140240, 4, RI_E2_ONLINE }, { 0x140260, 4, RI_E2_ONLINE },
+ { 0x140280, 4, RI_E2_ONLINE }, { 0x1402a0, 4, RI_E2_ONLINE },
+ { 0x1402c0, 4, RI_E2_ONLINE }, { 0x1402e0, 13, RI_E2_ONLINE },
+ { 0x144000, 4, RI_E1E1H_ONLINE }, { 0x148000, 4, RI_E1E1H_ONLINE },
+ { 0x14c000, 4, RI_E1E1H_ONLINE }, { 0x150000, 4, RI_E1E1H_ONLINE },
+ { 0x154000, 4, RI_E1E1H_ONLINE }, { 0x158000, 4, RI_E1E1H_ONLINE },
+ { 0x15c000, 2, RI_E1HE2_ONLINE }, { 0x15c008, 5, RI_E1H_ONLINE },
+ { 0x15c020, 27, RI_E2_ONLINE }, { 0x15c090, 13, RI_E2_ONLINE },
+ { 0x15c0c8, 34, RI_E2_ONLINE }, { 0x161000, 7, RI_ALL_ONLINE },
+ { 0x16103c, 2, RI_E2_ONLINE }, { 0x161800, 2, RI_ALL_ONLINE },
+ { 0x164000, 60, RI_ALL_ONLINE }, { 0x164110, 2, RI_E1HE2_ONLINE },
+ { 0x164118, 15, RI_E2_ONLINE }, { 0x164200, 1, RI_ALL_ONLINE },
{ 0x164208, 1, RI_ALL_ONLINE }, { 0x164210, 1, RI_ALL_ONLINE },
{ 0x164218, 1, RI_ALL_ONLINE }, { 0x164220, 1, RI_ALL_ONLINE },
{ 0x164228, 1, RI_ALL_ONLINE }, { 0x164230, 1, RI_ALL_ONLINE },
@@ -284,169 +273,298 @@ static const struct reg_addr reg_addrs[REGS_COUNT] = {
{ 0x164258, 1, RI_ALL_ONLINE }, { 0x164260, 1, RI_ALL_ONLINE },
{ 0x164270, 2, RI_ALL_ONLINE }, { 0x164280, 2, RI_ALL_ONLINE },
{ 0x164800, 2, RI_ALL_ONLINE }, { 0x165000, 2, RI_ALL_ONLINE },
- { 0x166000, 164, RI_ALL_ONLINE }, { 0x16629c, 1, RI_ALL_ONLINE },
- { 0x1662ac, 1, RI_ALL_ONLINE }, { 0x1662bc, 1, RI_ALL_ONLINE },
+ { 0x166000, 164, RI_ALL_ONLINE }, { 0x1662cc, 7, RI_E2_ONLINE },
{ 0x166400, 49, RI_ALL_ONLINE }, { 0x1664c8, 38, RI_ALL_ONLINE },
- { 0x166568, 2, RI_ALL_ONLINE }, { 0x166800, 1, RI_ALL_ONLINE },
- { 0x168000, 270, RI_ALL_ONLINE }, { 0x168444, 1, RI_ALL_ONLINE },
- { 0x168454, 1, RI_ALL_ONLINE }, { 0x168800, 19, RI_ALL_ONLINE },
- { 0x168900, 1, RI_ALL_ONLINE }, { 0x168a00, 128, RI_ALL_ONLINE },
- { 0x16a000, 1, RI_ALL_ONLINE }, { 0x16a004, 1535, RI_ALL_OFFLINE },
- { 0x16c000, 1, RI_ALL_ONLINE }, { 0x16c004, 1535, RI_ALL_OFFLINE },
- { 0x16e000, 16, RI_E1H_ONLINE }, { 0x16e100, 1, RI_E1H_ONLINE },
- { 0x16e200, 2, RI_E1H_ONLINE }, { 0x16e400, 183, RI_E1H_ONLINE },
- { 0x170000, 93, RI_ALL_ONLINE }, { 0x170180, 1, RI_ALL_ONLINE },
- { 0x170190, 1, RI_ALL_ONLINE }, { 0x170200, 4, RI_ALL_ONLINE },
- { 0x170214, 1, RI_ALL_ONLINE }, { 0x178000, 1, RI_ALL_ONLINE },
- { 0x180000, 61, RI_ALL_ONLINE }, { 0x180100, 1, RI_ALL_ONLINE },
- { 0x180110, 1, RI_ALL_ONLINE }, { 0x180120, 1, RI_ALL_ONLINE },
- { 0x180130, 1, RI_ALL_ONLINE }, { 0x18013c, 2, RI_E1H_ONLINE },
- { 0x180200, 58, RI_ALL_ONLINE }, { 0x180340, 4, RI_ALL_ONLINE },
- { 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_ALL_OFFLINE },
+ { 0x166568, 2, RI_ALL_ONLINE }, { 0x166570, 5, RI_E2_ONLINE },
+ { 0x166800, 1, RI_ALL_ONLINE }, { 0x168000, 137, RI_ALL_ONLINE },
+ { 0x168224, 2, RI_E1E1H_ONLINE }, { 0x16822c, 29, RI_ALL_ONLINE },
+ { 0x1682a0, 12, RI_E1E1H_ONLINE }, { 0x1682d0, 12, RI_ALL_ONLINE },
+ { 0x168300, 2, RI_E1E1H_ONLINE }, { 0x168308, 68, RI_ALL_ONLINE },
+ { 0x168418, 2, RI_E1E1H_ONLINE }, { 0x168420, 6, RI_ALL_ONLINE },
+ { 0x168800, 19, RI_ALL_ONLINE }, { 0x168900, 1, RI_ALL_ONLINE },
+ { 0x168a00, 128, RI_ALL_ONLINE }, { 0x16a000, 1, RI_ALL_ONLINE },
+ { 0x16a004, 1535, RI_ALL_OFFLINE }, { 0x16c000, 1, RI_ALL_ONLINE },
+ { 0x16c004, 1535, RI_ALL_OFFLINE }, { 0x16e000, 16, RI_E1H_ONLINE },
+ { 0x16e040, 8, RI_E2_ONLINE }, { 0x16e100, 1, RI_E1H_ONLINE },
+ { 0x16e200, 2, RI_E1H_ONLINE }, { 0x16e400, 161, RI_E1H_ONLINE },
+ { 0x16e684, 2, RI_E1HE2_ONLINE }, { 0x16e68c, 12, RI_E1H_ONLINE },
+ { 0x16e6bc, 4, RI_E1HE2_ONLINE }, { 0x16e6cc, 4, RI_E1H_ONLINE },
+ { 0x16e6e0, 12, RI_E2_ONLINE }, { 0x16e768, 17, RI_E2_ONLINE },
+ { 0x170000, 24, RI_ALL_ONLINE }, { 0x170060, 4, RI_E1E1H_ONLINE },
+ { 0x170070, 65, RI_ALL_ONLINE }, { 0x170194, 11, RI_E2_ONLINE },
+ { 0x1701c4, 1, RI_E2_ONLINE }, { 0x1701cc, 7, RI_E2_ONLINE },
+ { 0x1701ec, 1, RI_E2_ONLINE }, { 0x1701f4, 1, RI_E2_ONLINE },
+ { 0x170200, 4, RI_ALL_ONLINE }, { 0x170214, 1, RI_ALL_ONLINE },
+ { 0x170218, 77, RI_E2_ONLINE }, { 0x170400, 64, RI_E2_ONLINE },
+ { 0x178000, 1, RI_ALL_ONLINE }, { 0x180000, 61, RI_ALL_ONLINE },
+ { 0x18013c, 2, RI_E1HE2_ONLINE }, { 0x180200, 58, RI_ALL_ONLINE },
+ { 0x180340, 4, RI_ALL_ONLINE }, { 0x180380, 1, RI_E2_ONLINE },
+ { 0x180388, 1, RI_E2_ONLINE }, { 0x180390, 1, RI_E2_ONLINE },
+ { 0x180398, 1, RI_E2_ONLINE }, { 0x1803a0, 5, RI_E2_ONLINE },
+ { 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_E1E1H_OFFLINE },
{ 0x181000, 4, RI_ALL_ONLINE }, { 0x181010, 1020, RI_ALL_OFFLINE },
- { 0x1a0000, 1, RI_ALL_ONLINE }, { 0x1a0004, 1023, RI_ALL_OFFLINE },
- { 0x1a1000, 1, RI_ALL_ONLINE }, { 0x1a1004, 4607, RI_ALL_OFFLINE },
- { 0x1a5800, 2560, RI_E1H_OFFLINE }, { 0x1a8000, 64, RI_ALL_OFFLINE },
- { 0x1a8100, 1984, RI_E1H_OFFLINE }, { 0x1aa000, 1, RI_E1H_ONLINE },
- { 0x1aa004, 6655, RI_E1H_OFFLINE }, { 0x1b1800, 128, RI_ALL_OFFLINE },
- { 0x1b1c00, 128, RI_ALL_OFFLINE }, { 0x1b2000, 1, RI_ALL_OFFLINE },
- { 0x1b2400, 64, RI_E1H_OFFLINE }, { 0x1b8200, 1, RI_ALL_ONLINE },
+ { 0x1a0000, 1, RI_ALL_ONLINE }, { 0x1a0004, 5631, RI_ALL_OFFLINE },
+ { 0x1a5800, 2560, RI_E1HE2_OFFLINE }, { 0x1a8000, 1, RI_ALL_ONLINE },
+ { 0x1a8004, 8191, RI_E1HE2_OFFLINE }, { 0x1b0000, 1, RI_ALL_ONLINE },
+ { 0x1b0004, 15, RI_E1H_OFFLINE }, { 0x1b0040, 1, RI_E1HE2_ONLINE },
+ { 0x1b0044, 239, RI_E1H_OFFLINE }, { 0x1b0400, 1, RI_ALL_ONLINE },
+ { 0x1b0404, 255, RI_E1H_OFFLINE }, { 0x1b0800, 1, RI_ALL_ONLINE },
+ { 0x1b0840, 1, RI_E1HE2_ONLINE }, { 0x1b0c00, 1, RI_ALL_ONLINE },
+ { 0x1b1000, 1, RI_ALL_ONLINE }, { 0x1b1040, 1, RI_E1HE2_ONLINE },
+ { 0x1b1400, 1, RI_ALL_ONLINE }, { 0x1b1440, 1, RI_E1HE2_ONLINE },
+ { 0x1b1480, 1, RI_E1HE2_ONLINE }, { 0x1b14c0, 1, RI_E1HE2_ONLINE },
+ { 0x1b1800, 128, RI_ALL_OFFLINE }, { 0x1b1c00, 128, RI_ALL_OFFLINE },
+ { 0x1b2000, 1, RI_ALL_ONLINE }, { 0x1b2400, 1, RI_E1HE2_ONLINE },
+ { 0x1b2404, 5631, RI_E2_OFFLINE }, { 0x1b8000, 1, RI_ALL_ONLINE },
+ { 0x1b8040, 1, RI_ALL_ONLINE }, { 0x1b8080, 1, RI_ALL_ONLINE },
+ { 0x1b80c0, 1, RI_ALL_ONLINE }, { 0x1b8100, 1, RI_ALL_ONLINE },
+ { 0x1b8140, 1, RI_ALL_ONLINE }, { 0x1b8180, 1, RI_ALL_ONLINE },
+ { 0x1b81c0, 1, RI_ALL_ONLINE }, { 0x1b8200, 1, RI_ALL_ONLINE },
{ 0x1b8240, 1, RI_ALL_ONLINE }, { 0x1b8280, 1, RI_ALL_ONLINE },
- { 0x1b82c0, 1, RI_ALL_ONLINE }, { 0x1b8a00, 1, RI_ALL_ONLINE },
- { 0x1b8a80, 1, RI_ALL_ONLINE }, { 0x1c0000, 2, RI_ALL_ONLINE },
- { 0x200000, 65, RI_ALL_ONLINE }, { 0x200110, 1, RI_ALL_ONLINE },
- { 0x200120, 1, RI_ALL_ONLINE }, { 0x200130, 1, RI_ALL_ONLINE },
- { 0x200140, 1, RI_ALL_ONLINE }, { 0x20014c, 2, RI_E1H_ONLINE },
- { 0x200200, 58, RI_ALL_ONLINE }, { 0x200340, 4, RI_ALL_ONLINE },
- { 0x200400, 1, RI_ALL_ONLINE }, { 0x200404, 255, RI_ALL_OFFLINE },
- { 0x202000, 4, RI_ALL_ONLINE }, { 0x202010, 2044, RI_ALL_OFFLINE },
- { 0x220000, 1, RI_ALL_ONLINE }, { 0x220004, 1023, RI_ALL_OFFLINE },
- { 0x221000, 1, RI_ALL_ONLINE }, { 0x221004, 4607, RI_ALL_OFFLINE },
- { 0x225800, 1536, RI_E1H_OFFLINE }, { 0x227000, 1, RI_E1H_ONLINE },
- { 0x227004, 1023, RI_E1H_OFFLINE }, { 0x228000, 64, RI_ALL_OFFLINE },
- { 0x228100, 8640, RI_E1H_OFFLINE }, { 0x231800, 128, RI_ALL_OFFLINE },
- { 0x231c00, 128, RI_ALL_OFFLINE }, { 0x232000, 1, RI_ALL_OFFLINE },
- { 0x232400, 64, RI_E1H_OFFLINE }, { 0x238200, 1, RI_ALL_ONLINE },
- { 0x238240, 1, RI_ALL_ONLINE }, { 0x238280, 1, RI_ALL_ONLINE },
- { 0x2382c0, 1, RI_ALL_ONLINE }, { 0x238a00, 1, RI_ALL_ONLINE },
- { 0x238a80, 1, RI_ALL_ONLINE }, { 0x240000, 2, RI_ALL_ONLINE },
- { 0x280000, 65, RI_ALL_ONLINE }, { 0x280110, 1, RI_ALL_ONLINE },
- { 0x280120, 1, RI_ALL_ONLINE }, { 0x280130, 1, RI_ALL_ONLINE },
- { 0x280140, 1, RI_ALL_ONLINE }, { 0x28014c, 2, RI_E1H_ONLINE },
- { 0x280200, 58, RI_ALL_ONLINE }, { 0x280340, 4, RI_ALL_ONLINE },
- { 0x280400, 1, RI_ALL_ONLINE }, { 0x280404, 255, RI_ALL_OFFLINE },
- { 0x282000, 4, RI_ALL_ONLINE }, { 0x282010, 2044, RI_ALL_OFFLINE },
- { 0x2a0000, 1, RI_ALL_ONLINE }, { 0x2a0004, 1023, RI_ALL_OFFLINE },
- { 0x2a1000, 1, RI_ALL_ONLINE }, { 0x2a1004, 4607, RI_ALL_OFFLINE },
- { 0x2a5800, 2560, RI_E1H_OFFLINE }, { 0x2a8000, 64, RI_ALL_OFFLINE },
- { 0x2a8100, 960, RI_E1H_OFFLINE }, { 0x2a9000, 1, RI_E1H_ONLINE },
- { 0x2a9004, 7679, RI_E1H_OFFLINE }, { 0x2b1800, 128, RI_ALL_OFFLINE },
- { 0x2b1c00, 128, RI_ALL_OFFLINE }, { 0x2b2000, 1, RI_ALL_OFFLINE },
- { 0x2b2400, 64, RI_E1H_OFFLINE }, { 0x2b8200, 1, RI_ALL_ONLINE },
- { 0x2b8240, 1, RI_ALL_ONLINE }, { 0x2b8280, 1, RI_ALL_ONLINE },
- { 0x2b82c0, 1, RI_ALL_ONLINE }, { 0x2b8a00, 1, RI_ALL_ONLINE },
- { 0x2b8a80, 1, RI_ALL_ONLINE }, { 0x2c0000, 2, RI_ALL_ONLINE },
- { 0x300000, 65, RI_ALL_ONLINE }, { 0x300110, 1, RI_ALL_ONLINE },
- { 0x300120, 1, RI_ALL_ONLINE }, { 0x300130, 1, RI_ALL_ONLINE },
- { 0x300140, 1, RI_ALL_ONLINE }, { 0x30014c, 2, RI_E1H_ONLINE },
+ { 0x1b82c0, 1, RI_ALL_ONLINE }, { 0x1b8300, 1, RI_ALL_ONLINE },
+ { 0x1b8340, 1, RI_ALL_ONLINE }, { 0x1b8380, 1, RI_ALL_ONLINE },
+ { 0x1b83c0, 1, RI_ALL_ONLINE }, { 0x1b8400, 1, RI_ALL_ONLINE },
+ { 0x1b8440, 1, RI_ALL_ONLINE }, { 0x1b8480, 1, RI_ALL_ONLINE },
+ { 0x1b84c0, 1, RI_ALL_ONLINE }, { 0x1b8500, 1, RI_ALL_ONLINE },
+ { 0x1b8540, 1, RI_ALL_ONLINE }, { 0x1b8580, 1, RI_ALL_ONLINE },
+ { 0x1b85c0, 19, RI_E2_ONLINE }, { 0x1b8800, 1, RI_ALL_ONLINE },
+ { 0x1b8840, 1, RI_ALL_ONLINE }, { 0x1b8880, 1, RI_ALL_ONLINE },
+ { 0x1b88c0, 1, RI_ALL_ONLINE }, { 0x1b8900, 1, RI_ALL_ONLINE },
+ { 0x1b8940, 1, RI_ALL_ONLINE }, { 0x1b8980, 1, RI_ALL_ONLINE },
+ { 0x1b89c0, 1, RI_ALL_ONLINE }, { 0x1b8a00, 1, RI_ALL_ONLINE },
+ { 0x1b8a40, 1, RI_ALL_ONLINE }, { 0x1b8a80, 1, RI_ALL_ONLINE },
+ { 0x1b8ac0, 1, RI_ALL_ONLINE }, { 0x1b8b00, 1, RI_ALL_ONLINE },
+ { 0x1b8b40, 1, RI_ALL_ONLINE }, { 0x1b8b80, 1, RI_ALL_ONLINE },
+ { 0x1b8bc0, 1, RI_ALL_ONLINE }, { 0x1b8c00, 1, RI_ALL_ONLINE },
+ { 0x1b8c40, 1, RI_ALL_ONLINE }, { 0x1b8c80, 1, RI_ALL_ONLINE },
+ { 0x1b8cc0, 1, RI_ALL_ONLINE }, { 0x1b8cc4, 1, RI_E2_ONLINE },
+ { 0x1b8d00, 1, RI_ALL_ONLINE }, { 0x1b8d40, 1, RI_ALL_ONLINE },
+ { 0x1b8d80, 1, RI_ALL_ONLINE }, { 0x1b8dc0, 1, RI_ALL_ONLINE },
+ { 0x1b8e00, 1, RI_ALL_ONLINE }, { 0x1b8e40, 1, RI_ALL_ONLINE },
+ { 0x1b8e80, 1, RI_ALL_ONLINE }, { 0x1b8e84, 1, RI_E2_ONLINE },
+ { 0x1b8ec0, 1, RI_E1HE2_ONLINE }, { 0x1b8f00, 1, RI_E1HE2_ONLINE },
+ { 0x1b8f40, 1, RI_E1HE2_ONLINE }, { 0x1b8f80, 1, RI_E1HE2_ONLINE },
+ { 0x1b8fc0, 1, RI_E1HE2_ONLINE }, { 0x1b8fc4, 2, RI_E2_ONLINE },
+ { 0x1b8fd0, 6, RI_E2_ONLINE }, { 0x1b9000, 1, RI_E2_ONLINE },
+ { 0x1b9040, 3, RI_E2_ONLINE }, { 0x1b9400, 14, RI_E2_ONLINE },
+ { 0x1b943c, 19, RI_E2_ONLINE }, { 0x1b9490, 10, RI_E2_ONLINE },
+ { 0x1c0000, 2, RI_ALL_ONLINE }, { 0x200000, 65, RI_ALL_ONLINE },
+ { 0x20014c, 2, RI_E1HE2_ONLINE }, { 0x200200, 58, RI_ALL_ONLINE },
+ { 0x200340, 4, RI_ALL_ONLINE }, { 0x200380, 1, RI_E2_ONLINE },
+ { 0x200388, 1, RI_E2_ONLINE }, { 0x200390, 1, RI_E2_ONLINE },
+ { 0x200398, 1, RI_E2_ONLINE }, { 0x2003a0, 1, RI_E2_ONLINE },
+ { 0x2003a8, 2, RI_E2_ONLINE }, { 0x200400, 1, RI_ALL_ONLINE },
+ { 0x200404, 255, RI_E1E1H_OFFLINE }, { 0x202000, 4, RI_ALL_ONLINE },
+ { 0x202010, 2044, RI_ALL_OFFLINE }, { 0x220000, 1, RI_ALL_ONLINE },
+ { 0x220004, 5631, RI_ALL_OFFLINE }, { 0x225800, 2560, RI_E1HE2_OFFLINE},
+ { 0x228000, 1, RI_ALL_ONLINE }, { 0x228004, 8191, RI_E1HE2_OFFLINE },
+ { 0x230000, 1, RI_ALL_ONLINE }, { 0x230004, 15, RI_E1H_OFFLINE },
+ { 0x230040, 1, RI_E1HE2_ONLINE }, { 0x230044, 239, RI_E1H_OFFLINE },
+ { 0x230400, 1, RI_ALL_ONLINE }, { 0x230404, 255, RI_E1H_OFFLINE },
+ { 0x230800, 1, RI_ALL_ONLINE }, { 0x230840, 1, RI_E1HE2_ONLINE },
+ { 0x230c00, 1, RI_ALL_ONLINE }, { 0x231000, 1, RI_ALL_ONLINE },
+ { 0x231040, 1, RI_E1HE2_ONLINE }, { 0x231400, 1, RI_ALL_ONLINE },
+ { 0x231440, 1, RI_E1HE2_ONLINE }, { 0x231480, 1, RI_E1HE2_ONLINE },
+ { 0x2314c0, 1, RI_E1HE2_ONLINE }, { 0x231800, 128, RI_ALL_OFFLINE },
+ { 0x231c00, 128, RI_ALL_OFFLINE }, { 0x232000, 1, RI_ALL_ONLINE },
+ { 0x232400, 1, RI_E1HE2_ONLINE }, { 0x232404, 5631, RI_E2_OFFLINE },
+ { 0x238000, 1, RI_ALL_ONLINE }, { 0x238040, 1, RI_ALL_ONLINE },
+ { 0x238080, 1, RI_ALL_ONLINE }, { 0x2380c0, 1, RI_ALL_ONLINE },
+ { 0x238100, 1, RI_ALL_ONLINE }, { 0x238140, 1, RI_ALL_ONLINE },
+ { 0x238180, 1, RI_ALL_ONLINE }, { 0x2381c0, 1, RI_ALL_ONLINE },
+ { 0x238200, 1, RI_ALL_ONLINE }, { 0x238240, 1, RI_ALL_ONLINE },
+ { 0x238280, 1, RI_ALL_ONLINE }, { 0x2382c0, 1, RI_ALL_ONLINE },
+ { 0x238300, 1, RI_ALL_ONLINE }, { 0x238340, 1, RI_ALL_ONLINE },
+ { 0x238380, 1, RI_ALL_ONLINE }, { 0x2383c0, 1, RI_ALL_ONLINE },
+ { 0x238400, 1, RI_ALL_ONLINE }, { 0x238440, 1, RI_ALL_ONLINE },
+ { 0x238480, 1, RI_ALL_ONLINE }, { 0x2384c0, 1, RI_ALL_ONLINE },
+ { 0x238500, 1, RI_ALL_ONLINE }, { 0x238540, 1, RI_ALL_ONLINE },
+ { 0x238580, 1, RI_ALL_ONLINE }, { 0x2385c0, 19, RI_E2_ONLINE },
+ { 0x238800, 1, RI_ALL_ONLINE }, { 0x238840, 1, RI_ALL_ONLINE },
+ { 0x238880, 1, RI_ALL_ONLINE }, { 0x2388c0, 1, RI_ALL_ONLINE },
+ { 0x238900, 1, RI_ALL_ONLINE }, { 0x238940, 1, RI_ALL_ONLINE },
+ { 0x238980, 1, RI_ALL_ONLINE }, { 0x2389c0, 1, RI_ALL_ONLINE },
+ { 0x238a00, 1, RI_ALL_ONLINE }, { 0x238a40, 1, RI_ALL_ONLINE },
+ { 0x238a80, 1, RI_ALL_ONLINE }, { 0x238ac0, 1, RI_ALL_ONLINE },
+ { 0x238b00, 1, RI_ALL_ONLINE }, { 0x238b40, 1, RI_ALL_ONLINE },
+ { 0x238b80, 1, RI_ALL_ONLINE }, { 0x238bc0, 1, RI_ALL_ONLINE },
+ { 0x238c00, 1, RI_ALL_ONLINE }, { 0x238c40, 1, RI_ALL_ONLINE },
+ { 0x238c80, 1, RI_ALL_ONLINE }, { 0x238cc0, 1, RI_ALL_ONLINE },
+ { 0x238cc4, 1, RI_E2_ONLINE }, { 0x238d00, 1, RI_ALL_ONLINE },
+ { 0x238d40, 1, RI_ALL_ONLINE }, { 0x238d80, 1, RI_ALL_ONLINE },
+ { 0x238dc0, 1, RI_ALL_ONLINE }, { 0x238e00, 1, RI_ALL_ONLINE },
+ { 0x238e40, 1, RI_ALL_ONLINE }, { 0x238e80, 1, RI_ALL_ONLINE },
+ { 0x238e84, 1, RI_E2_ONLINE }, { 0x238ec0, 1, RI_E1HE2_ONLINE },
+ { 0x238f00, 1, RI_E1HE2_ONLINE }, { 0x238f40, 1, RI_E1HE2_ONLINE },
+ { 0x238f80, 1, RI_E1HE2_ONLINE }, { 0x238fc0, 1, RI_E1HE2_ONLINE },
+ { 0x238fc4, 2, RI_E2_ONLINE }, { 0x238fd0, 6, RI_E2_ONLINE },
+ { 0x239000, 1, RI_E2_ONLINE }, { 0x239040, 3, RI_E2_ONLINE },
+ { 0x240000, 2, RI_ALL_ONLINE }, { 0x280000, 65, RI_ALL_ONLINE },
+ { 0x28014c, 2, RI_E1HE2_ONLINE }, { 0x280200, 58, RI_ALL_ONLINE },
+ { 0x280340, 4, RI_ALL_ONLINE }, { 0x280380, 1, RI_E2_ONLINE },
+ { 0x280388, 1, RI_E2_ONLINE }, { 0x280390, 1, RI_E2_ONLINE },
+ { 0x280398, 1, RI_E2_ONLINE }, { 0x2803a0, 1, RI_E2_ONLINE },
+ { 0x2803a8, 2, RI_E2_ONLINE }, { 0x280400, 1, RI_ALL_ONLINE },
+ { 0x280404, 255, RI_E1E1H_OFFLINE }, { 0x282000, 4, RI_ALL_ONLINE },
+ { 0x282010, 2044, RI_ALL_OFFLINE }, { 0x2a0000, 1, RI_ALL_ONLINE },
+ { 0x2a0004, 5631, RI_ALL_OFFLINE }, { 0x2a5800, 2560, RI_E1HE2_OFFLINE},
+ { 0x2a8000, 1, RI_ALL_ONLINE }, { 0x2a8004, 8191, RI_E1HE2_OFFLINE },
+ { 0x2b0000, 1, RI_ALL_ONLINE }, { 0x2b0004, 15, RI_E1H_OFFLINE },
+ { 0x2b0040, 1, RI_E1HE2_ONLINE }, { 0x2b0044, 239, RI_E1H_OFFLINE },
+ { 0x2b0400, 1, RI_ALL_ONLINE }, { 0x2b0404, 255, RI_E1H_OFFLINE },
+ { 0x2b0800, 1, RI_ALL_ONLINE }, { 0x2b0840, 1, RI_E1HE2_ONLINE },
+ { 0x2b0c00, 1, RI_ALL_ONLINE }, { 0x2b1000, 1, RI_ALL_ONLINE },
+ { 0x2b1040, 1, RI_E1HE2_ONLINE }, { 0x2b1400, 1, RI_ALL_ONLINE },
+ { 0x2b1440, 1, RI_E1HE2_ONLINE }, { 0x2b1480, 1, RI_E1HE2_ONLINE },
+ { 0x2b14c0, 1, RI_E1HE2_ONLINE }, { 0x2b1800, 128, RI_ALL_OFFLINE },
+ { 0x2b1c00, 128, RI_ALL_OFFLINE }, { 0x2b2000, 1, RI_ALL_ONLINE },
+ { 0x2b2400, 1, RI_E1HE2_ONLINE }, { 0x2b2404, 5631, RI_E2_OFFLINE },
+ { 0x2b8000, 1, RI_ALL_ONLINE }, { 0x2b8040, 1, RI_ALL_ONLINE },
+ { 0x2b8080, 1, RI_ALL_ONLINE }, { 0x2b80c0, 1, RI_ALL_ONLINE },
+ { 0x2b8100, 1, RI_ALL_ONLINE }, { 0x2b8140, 1, RI_ALL_ONLINE },
+ { 0x2b8180, 1, RI_ALL_ONLINE }, { 0x2b81c0, 1, RI_ALL_ONLINE },
+ { 0x2b8200, 1, RI_ALL_ONLINE }, { 0x2b8240, 1, RI_ALL_ONLINE },
+ { 0x2b8280, 1, RI_ALL_ONLINE }, { 0x2b82c0, 1, RI_ALL_ONLINE },
+ { 0x2b8300, 1, RI_ALL_ONLINE }, { 0x2b8340, 1, RI_ALL_ONLINE },
+ { 0x2b8380, 1, RI_ALL_ONLINE }, { 0x2b83c0, 1, RI_ALL_ONLINE },
+ { 0x2b8400, 1, RI_ALL_ONLINE }, { 0x2b8440, 1, RI_ALL_ONLINE },
+ { 0x2b8480, 1, RI_ALL_ONLINE }, { 0x2b84c0, 1, RI_ALL_ONLINE },
+ { 0x2b8500, 1, RI_ALL_ONLINE }, { 0x2b8540, 1, RI_ALL_ONLINE },
+ { 0x2b8580, 1, RI_ALL_ONLINE }, { 0x2b85c0, 19, RI_E2_ONLINE },
+ { 0x2b8800, 1, RI_ALL_ONLINE }, { 0x2b8840, 1, RI_ALL_ONLINE },
+ { 0x2b8880, 1, RI_ALL_ONLINE }, { 0x2b88c0, 1, RI_ALL_ONLINE },
+ { 0x2b8900, 1, RI_ALL_ONLINE }, { 0x2b8940, 1, RI_ALL_ONLINE },
+ { 0x2b8980, 1, RI_ALL_ONLINE }, { 0x2b89c0, 1, RI_ALL_ONLINE },
+ { 0x2b8a00, 1, RI_ALL_ONLINE }, { 0x2b8a40, 1, RI_ALL_ONLINE },
+ { 0x2b8a80, 1, RI_ALL_ONLINE }, { 0x2b8ac0, 1, RI_ALL_ONLINE },
+ { 0x2b8b00, 1, RI_ALL_ONLINE }, { 0x2b8b40, 1, RI_ALL_ONLINE },
+ { 0x2b8b80, 1, RI_ALL_ONLINE }, { 0x2b8bc0, 1, RI_ALL_ONLINE },
+ { 0x2b8c00, 1, RI_ALL_ONLINE }, { 0x2b8c40, 1, RI_ALL_ONLINE },
+ { 0x2b8c80, 1, RI_ALL_ONLINE }, { 0x2b8cc0, 1, RI_ALL_ONLINE },
+ { 0x2b8cc4, 1, RI_E2_ONLINE }, { 0x2b8d00, 1, RI_ALL_ONLINE },
+ { 0x2b8d40, 1, RI_ALL_ONLINE }, { 0x2b8d80, 1, RI_ALL_ONLINE },
+ { 0x2b8dc0, 1, RI_ALL_ONLINE }, { 0x2b8e00, 1, RI_ALL_ONLINE },
+ { 0x2b8e40, 1, RI_ALL_ONLINE }, { 0x2b8e80, 1, RI_ALL_ONLINE },
+ { 0x2b8e84, 1, RI_E2_ONLINE }, { 0x2b8ec0, 1, RI_E1HE2_ONLINE },
+ { 0x2b8f00, 1, RI_E1HE2_ONLINE }, { 0x2b8f40, 1, RI_E1HE2_ONLINE },
+ { 0x2b8f80, 1, RI_E1HE2_ONLINE }, { 0x2b8fc0, 1, RI_E1HE2_ONLINE },
+ { 0x2b8fc4, 2, RI_E2_ONLINE }, { 0x2b8fd0, 6, RI_E2_ONLINE },
+ { 0x2b9000, 1, RI_E2_ONLINE }, { 0x2b9040, 3, RI_E2_ONLINE },
+ { 0x2b9400, 14, RI_E2_ONLINE }, { 0x2b943c, 19, RI_E2_ONLINE },
+ { 0x2b9490, 10, RI_E2_ONLINE }, { 0x2c0000, 2, RI_ALL_ONLINE },
+ { 0x300000, 65, RI_ALL_ONLINE }, { 0x30014c, 2, RI_E1HE2_ONLINE },
{ 0x300200, 58, RI_ALL_ONLINE }, { 0x300340, 4, RI_ALL_ONLINE },
- { 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_ALL_OFFLINE },
+ { 0x300380, 1, RI_E2_ONLINE }, { 0x300388, 1, RI_E2_ONLINE },
+ { 0x300390, 1, RI_E2_ONLINE }, { 0x300398, 1, RI_E2_ONLINE },
+ { 0x3003a0, 1, RI_E2_ONLINE }, { 0x3003a8, 2, RI_E2_ONLINE },
+ { 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_E1E1H_OFFLINE },
{ 0x302000, 4, RI_ALL_ONLINE }, { 0x302010, 2044, RI_ALL_OFFLINE },
- { 0x320000, 1, RI_ALL_ONLINE }, { 0x320004, 1023, RI_ALL_OFFLINE },
- { 0x321000, 1, RI_ALL_ONLINE }, { 0x321004, 4607, RI_ALL_OFFLINE },
- { 0x325800, 2560, RI_E1H_OFFLINE }, { 0x328000, 64, RI_ALL_OFFLINE },
- { 0x328100, 536, RI_E1H_OFFLINE }, { 0x328960, 1, RI_E1H_ONLINE },
- { 0x328964, 8103, RI_E1H_OFFLINE }, { 0x331800, 128, RI_ALL_OFFLINE },
- { 0x331c00, 128, RI_ALL_OFFLINE }, { 0x332000, 1, RI_ALL_OFFLINE },
- { 0x332400, 64, RI_E1H_OFFLINE }, { 0x338200, 1, RI_ALL_ONLINE },
+ { 0x320000, 1, RI_ALL_ONLINE }, { 0x320004, 5631, RI_ALL_OFFLINE },
+ { 0x325800, 2560, RI_E1HE2_OFFLINE }, { 0x328000, 1, RI_ALL_ONLINE },
+ { 0x328004, 8191, RI_E1HE2_OFFLINE }, { 0x330000, 1, RI_ALL_ONLINE },
+ { 0x330004, 15, RI_E1H_OFFLINE }, { 0x330040, 1, RI_E1HE2_ONLINE },
+ { 0x330044, 239, RI_E1H_OFFLINE }, { 0x330400, 1, RI_ALL_ONLINE },
+ { 0x330404, 255, RI_E1H_OFFLINE }, { 0x330800, 1, RI_ALL_ONLINE },
+ { 0x330840, 1, RI_E1HE2_ONLINE }, { 0x330c00, 1, RI_ALL_ONLINE },
+ { 0x331000, 1, RI_ALL_ONLINE }, { 0x331040, 1, RI_E1HE2_ONLINE },
+ { 0x331400, 1, RI_ALL_ONLINE }, { 0x331440, 1, RI_E1HE2_ONLINE },
+ { 0x331480, 1, RI_E1HE2_ONLINE }, { 0x3314c0, 1, RI_E1HE2_ONLINE },
+ { 0x331800, 128, RI_ALL_OFFLINE }, { 0x331c00, 128, RI_ALL_OFFLINE },
+ { 0x332000, 1, RI_ALL_ONLINE }, { 0x332400, 1, RI_E1HE2_ONLINE },
+ { 0x332404, 5631, RI_E2_OFFLINE }, { 0x338000, 1, RI_ALL_ONLINE },
+ { 0x338040, 1, RI_ALL_ONLINE }, { 0x338080, 1, RI_ALL_ONLINE },
+ { 0x3380c0, 1, RI_ALL_ONLINE }, { 0x338100, 1, RI_ALL_ONLINE },
+ { 0x338140, 1, RI_ALL_ONLINE }, { 0x338180, 1, RI_ALL_ONLINE },
+ { 0x3381c0, 1, RI_ALL_ONLINE }, { 0x338200, 1, RI_ALL_ONLINE },
{ 0x338240, 1, RI_ALL_ONLINE }, { 0x338280, 1, RI_ALL_ONLINE },
- { 0x3382c0, 1, RI_ALL_ONLINE }, { 0x338a00, 1, RI_ALL_ONLINE },
- { 0x338a80, 1, RI_ALL_ONLINE }, { 0x340000, 2, RI_ALL_ONLINE }
+ { 0x3382c0, 1, RI_ALL_ONLINE }, { 0x338300, 1, RI_ALL_ONLINE },
+ { 0x338340, 1, RI_ALL_ONLINE }, { 0x338380, 1, RI_ALL_ONLINE },
+ { 0x3383c0, 1, RI_ALL_ONLINE }, { 0x338400, 1, RI_ALL_ONLINE },
+ { 0x338440, 1, RI_ALL_ONLINE }, { 0x338480, 1, RI_ALL_ONLINE },
+ { 0x3384c0, 1, RI_ALL_ONLINE }, { 0x338500, 1, RI_ALL_ONLINE },
+ { 0x338540, 1, RI_ALL_ONLINE }, { 0x338580, 1, RI_ALL_ONLINE },
+ { 0x3385c0, 19, RI_E2_ONLINE }, { 0x338800, 1, RI_ALL_ONLINE },
+ { 0x338840, 1, RI_ALL_ONLINE }, { 0x338880, 1, RI_ALL_ONLINE },
+ { 0x3388c0, 1, RI_ALL_ONLINE }, { 0x338900, 1, RI_ALL_ONLINE },
+ { 0x338940, 1, RI_ALL_ONLINE }, { 0x338980, 1, RI_ALL_ONLINE },
+ { 0x3389c0, 1, RI_ALL_ONLINE }, { 0x338a00, 1, RI_ALL_ONLINE },
+ { 0x338a40, 1, RI_ALL_ONLINE }, { 0x338a80, 1, RI_ALL_ONLINE },
+ { 0x338ac0, 1, RI_ALL_ONLINE }, { 0x338b00, 1, RI_ALL_ONLINE },
+ { 0x338b40, 1, RI_ALL_ONLINE }, { 0x338b80, 1, RI_ALL_ONLINE },
+ { 0x338bc0, 1, RI_ALL_ONLINE }, { 0x338c00, 1, RI_ALL_ONLINE },
+ { 0x338c40, 1, RI_ALL_ONLINE }, { 0x338c80, 1, RI_ALL_ONLINE },
+ { 0x338cc0, 1, RI_ALL_ONLINE }, { 0x338cc4, 1, RI_E2_ONLINE },
+ { 0x338d00, 1, RI_ALL_ONLINE }, { 0x338d40, 1, RI_ALL_ONLINE },
+ { 0x338d80, 1, RI_ALL_ONLINE }, { 0x338dc0, 1, RI_ALL_ONLINE },
+ { 0x338e00, 1, RI_ALL_ONLINE }, { 0x338e40, 1, RI_ALL_ONLINE },
+ { 0x338e80, 1, RI_ALL_ONLINE }, { 0x338e84, 1, RI_E2_ONLINE },
+ { 0x338ec0, 1, RI_E1HE2_ONLINE }, { 0x338f00, 1, RI_E1HE2_ONLINE },
+ { 0x338f40, 1, RI_E1HE2_ONLINE }, { 0x338f80, 1, RI_E1HE2_ONLINE },
+ { 0x338fc0, 1, RI_E1HE2_ONLINE }, { 0x338fc4, 2, RI_E2_ONLINE },
+ { 0x338fd0, 6, RI_E2_ONLINE }, { 0x339000, 1, RI_E2_ONLINE },
+ { 0x339040, 3, RI_E2_ONLINE }, { 0x340000, 2, RI_ALL_ONLINE },
};
-
-#define IDLE_REGS_COUNT 277
+#define IDLE_REGS_COUNT 237
static const struct reg_addr idle_addrs[IDLE_REGS_COUNT] = {
- { 0x2114, 1, RI_ALL_ONLINE }, { 0x2120, 1, RI_ALL_ONLINE },
- { 0x212c, 4, RI_ALL_ONLINE }, { 0x2814, 1, RI_ALL_ONLINE },
- { 0x281c, 2, RI_ALL_ONLINE }, { 0xa38c, 1, RI_ALL_ONLINE },
+ { 0x2104, 1, RI_ALL_ONLINE }, { 0x2110, 2, RI_ALL_ONLINE },
+ { 0x211c, 8, RI_ALL_ONLINE }, { 0x2814, 1, RI_ALL_ONLINE },
+ { 0x281c, 2, RI_ALL_ONLINE }, { 0x2854, 1, RI_ALL_ONLINE },
+ { 0x285c, 1, RI_ALL_ONLINE }, { 0x9010, 7, RI_E2_ONLINE },
+ { 0x9030, 1, RI_E2_ONLINE }, { 0x9068, 16, RI_E2_ONLINE },
+ { 0x9230, 2, RI_E2_ONLINE }, { 0x9244, 1, RI_E2_ONLINE },
+ { 0x9298, 1, RI_E2_ONLINE }, { 0x92a8, 1, RI_E2_ONLINE },
+ { 0xa38c, 1, RI_ALL_ONLINE }, { 0xa3c4, 1, RI_E1HE2_ONLINE },
{ 0xa408, 1, RI_ALL_ONLINE }, { 0xa42c, 12, RI_ALL_ONLINE },
- { 0xa600, 5, RI_E1H_ONLINE }, { 0xa618, 1, RI_E1H_ONLINE },
- { 0xc09c, 1, RI_ALL_ONLINE }, { 0x103b0, 1, RI_ALL_ONLINE },
- { 0x103c0, 1, RI_ALL_ONLINE }, { 0x103d0, 1, RI_E1H_ONLINE },
- { 0x2021c, 11, RI_ALL_ONLINE }, { 0x202a8, 1, RI_ALL_ONLINE },
- { 0x202b8, 1, RI_ALL_ONLINE }, { 0x20404, 1, RI_ALL_ONLINE },
- { 0x2040c, 2, RI_ALL_ONLINE }, { 0x2041c, 2, RI_ALL_ONLINE },
- { 0x40154, 14, RI_ALL_ONLINE }, { 0x40198, 1, RI_ALL_ONLINE },
- { 0x404ac, 1, RI_ALL_ONLINE }, { 0x404bc, 1, RI_ALL_ONLINE },
- { 0x42290, 1, RI_ALL_ONLINE }, { 0x422a0, 1, RI_ALL_ONLINE },
- { 0x422b0, 1, RI_ALL_ONLINE }, { 0x42548, 1, RI_ALL_ONLINE },
- { 0x42550, 1, RI_ALL_ONLINE }, { 0x42558, 1, RI_ALL_ONLINE },
- { 0x50160, 8, RI_ALL_ONLINE }, { 0x501d0, 1, RI_ALL_ONLINE },
- { 0x501e0, 1, RI_ALL_ONLINE }, { 0x50204, 1, RI_ALL_ONLINE },
- { 0x5020c, 2, RI_ALL_ONLINE }, { 0x5021c, 1, RI_ALL_ONLINE },
- { 0x60090, 1, RI_ALL_ONLINE }, { 0x6011c, 1, RI_ALL_ONLINE },
- { 0x6012c, 1, RI_ALL_ONLINE }, { 0xc101c, 1, RI_ALL_ONLINE },
- { 0xc102c, 1, RI_ALL_ONLINE }, { 0xc2290, 1, RI_ALL_ONLINE },
- { 0xc22a0, 1, RI_ALL_ONLINE }, { 0xc22b0, 1, RI_ALL_ONLINE },
- { 0xc2548, 1, RI_ALL_ONLINE }, { 0xc2550, 1, RI_ALL_ONLINE },
- { 0xc2558, 1, RI_ALL_ONLINE }, { 0xc4294, 1, RI_ALL_ONLINE },
- { 0xc42a4, 1, RI_ALL_ONLINE }, { 0xc42b4, 1, RI_ALL_ONLINE },
- { 0xc4550, 1, RI_ALL_ONLINE }, { 0xc4558, 1, RI_ALL_ONLINE },
- { 0xc4560, 1, RI_ALL_ONLINE }, { 0xd016c, 8, RI_ALL_ONLINE },
- { 0xd01d8, 1, RI_ALL_ONLINE }, { 0xd01e8, 1, RI_ALL_ONLINE },
- { 0xd0204, 1, RI_ALL_ONLINE }, { 0xd020c, 3, RI_ALL_ONLINE },
- { 0xe0154, 8, RI_ALL_ONLINE }, { 0xe01c8, 1, RI_ALL_ONLINE },
- { 0xe01d8, 1, RI_ALL_ONLINE }, { 0xe0204, 1, RI_ALL_ONLINE },
- { 0xe020c, 2, RI_ALL_ONLINE }, { 0xe021c, 2, RI_ALL_ONLINE },
- { 0x101014, 1, RI_ALL_ONLINE }, { 0x101030, 1, RI_ALL_ONLINE },
- { 0x101040, 1, RI_ALL_ONLINE }, { 0x102058, 1, RI_ALL_ONLINE },
- { 0x102080, 16, RI_ALL_ONLINE }, { 0x103004, 2, RI_ALL_ONLINE },
- { 0x103068, 1, RI_ALL_ONLINE }, { 0x103078, 1, RI_ALL_ONLINE },
- { 0x103088, 1, RI_ALL_ONLINE }, { 0x10309c, 2, RI_E1H_ONLINE },
+ { 0xa600, 5, RI_E1HE2_ONLINE }, { 0xa618, 1, RI_E1HE2_ONLINE },
+ { 0xa714, 1, RI_E2_ONLINE }, { 0xa720, 1, RI_E2_ONLINE },
+ { 0xa750, 1, RI_E2_ONLINE }, { 0xc09c, 1, RI_E1E1H_ONLINE },
+ { 0x103b0, 1, RI_ALL_ONLINE }, { 0x103c0, 1, RI_ALL_ONLINE },
+ { 0x103d0, 1, RI_E1H_ONLINE }, { 0x183bc, 1, RI_E2_ONLINE },
+ { 0x183cc, 1, RI_E2_ONLINE }, { 0x2021c, 11, RI_ALL_ONLINE },
+ { 0x202a8, 1, RI_ALL_ONLINE }, { 0x202b8, 1, RI_ALL_ONLINE },
+ { 0x20404, 1, RI_ALL_ONLINE }, { 0x2040c, 2, RI_ALL_ONLINE },
+ { 0x2041c, 2, RI_ALL_ONLINE }, { 0x40154, 14, RI_ALL_ONLINE },
+ { 0x40198, 1, RI_ALL_ONLINE }, { 0x404ac, 1, RI_ALL_ONLINE },
+ { 0x404bc, 1, RI_ALL_ONLINE }, { 0x42290, 1, RI_ALL_ONLINE },
+ { 0x422a0, 1, RI_ALL_ONLINE }, { 0x422b0, 1, RI_ALL_ONLINE },
+ { 0x42548, 1, RI_ALL_ONLINE }, { 0x42550, 1, RI_ALL_ONLINE },
+ { 0x42558, 1, RI_ALL_ONLINE }, { 0x50160, 8, RI_ALL_ONLINE },
+ { 0x501d0, 1, RI_ALL_ONLINE }, { 0x501e0, 1, RI_ALL_ONLINE },
+ { 0x50204, 1, RI_ALL_ONLINE }, { 0x5020c, 2, RI_ALL_ONLINE },
+ { 0x5021c, 1, RI_ALL_ONLINE }, { 0x60090, 1, RI_ALL_ONLINE },
+ { 0x6011c, 1, RI_ALL_ONLINE }, { 0x6012c, 1, RI_ALL_ONLINE },
+ { 0xc101c, 1, RI_ALL_ONLINE }, { 0xc102c, 1, RI_ALL_ONLINE },
+ { 0xc2290, 1, RI_ALL_ONLINE }, { 0xc22a0, 1, RI_ALL_ONLINE },
+ { 0xc22b0, 1, RI_ALL_ONLINE }, { 0xc2548, 1, RI_ALL_ONLINE },
+ { 0xc2550, 1, RI_ALL_ONLINE }, { 0xc2558, 1, RI_ALL_ONLINE },
+ { 0xc4294, 1, RI_ALL_ONLINE }, { 0xc42a4, 1, RI_ALL_ONLINE },
+ { 0xc42b4, 1, RI_ALL_ONLINE }, { 0xc4550, 1, RI_ALL_ONLINE },
+ { 0xc4558, 1, RI_ALL_ONLINE }, { 0xc4560, 1, RI_ALL_ONLINE },
+ { 0xd016c, 8, RI_ALL_ONLINE }, { 0xd01d8, 1, RI_ALL_ONLINE },
+ { 0xd01e8, 1, RI_ALL_ONLINE }, { 0xd0204, 1, RI_ALL_ONLINE },
+ { 0xd020c, 3, RI_ALL_ONLINE }, { 0xe0154, 8, RI_ALL_ONLINE },
+ { 0xe01c8, 1, RI_ALL_ONLINE }, { 0xe01d8, 1, RI_ALL_ONLINE },
+ { 0xe0204, 1, RI_ALL_ONLINE }, { 0xe020c, 2, RI_ALL_ONLINE },
+ { 0xe021c, 2, RI_ALL_ONLINE }, { 0x101014, 1, RI_ALL_ONLINE },
+ { 0x101030, 1, RI_ALL_ONLINE }, { 0x101040, 1, RI_ALL_ONLINE },
+ { 0x102058, 1, RI_ALL_ONLINE }, { 0x102080, 16, RI_ALL_ONLINE },
+ { 0x103004, 2, RI_ALL_ONLINE }, { 0x103068, 1, RI_ALL_ONLINE },
+ { 0x103078, 1, RI_ALL_ONLINE }, { 0x103088, 1, RI_ALL_ONLINE },
+ { 0x10309c, 2, RI_E1HE2_ONLINE }, { 0x1030b8, 2, RI_E2_ONLINE },
+ { 0x1030cc, 1, RI_E2_ONLINE }, { 0x1030e0, 1, RI_E2_ONLINE },
{ 0x104004, 1, RI_ALL_ONLINE }, { 0x104018, 1, RI_ALL_ONLINE },
{ 0x104020, 1, RI_ALL_ONLINE }, { 0x10403c, 1, RI_ALL_ONLINE },
{ 0x1040fc, 1, RI_ALL_ONLINE }, { 0x10410c, 1, RI_ALL_ONLINE },
{ 0x104400, 64, RI_ALL_ONLINE }, { 0x104800, 64, RI_ALL_ONLINE },
- { 0x105000, 3, RI_ALL_ONLINE }, { 0x105010, 3, RI_ALL_ONLINE },
- { 0x105020, 3, RI_ALL_ONLINE }, { 0x105030, 3, RI_ALL_ONLINE },
- { 0x105040, 3, RI_ALL_ONLINE }, { 0x105050, 3, RI_ALL_ONLINE },
- { 0x105060, 3, RI_ALL_ONLINE }, { 0x105070, 3, RI_ALL_ONLINE },
- { 0x105080, 3, RI_ALL_ONLINE }, { 0x105090, 3, RI_ALL_ONLINE },
- { 0x1050a0, 3, RI_ALL_ONLINE }, { 0x1050b0, 3, RI_ALL_ONLINE },
- { 0x1050c0, 3, RI_ALL_ONLINE }, { 0x1050d0, 3, RI_ALL_ONLINE },
- { 0x1050e0, 3, RI_ALL_ONLINE }, { 0x1050f0, 3, RI_ALL_ONLINE },
- { 0x105100, 3, RI_ALL_ONLINE }, { 0x105110, 3, RI_ALL_ONLINE },
- { 0x105120, 3, RI_ALL_ONLINE }, { 0x105130, 3, RI_ALL_ONLINE },
- { 0x105140, 3, RI_ALL_ONLINE }, { 0x105150, 3, RI_ALL_ONLINE },
- { 0x105160, 3, RI_ALL_ONLINE }, { 0x105170, 3, RI_ALL_ONLINE },
- { 0x105180, 3, RI_ALL_ONLINE }, { 0x105190, 3, RI_ALL_ONLINE },
- { 0x1051a0, 3, RI_ALL_ONLINE }, { 0x1051b0, 3, RI_ALL_ONLINE },
- { 0x1051c0, 3, RI_ALL_ONLINE }, { 0x1051d0, 3, RI_ALL_ONLINE },
- { 0x1051e0, 3, RI_ALL_ONLINE }, { 0x1051f0, 3, RI_ALL_ONLINE },
- { 0x105200, 3, RI_ALL_ONLINE }, { 0x105210, 3, RI_ALL_ONLINE },
- { 0x105220, 3, RI_ALL_ONLINE }, { 0x105230, 3, RI_ALL_ONLINE },
- { 0x105240, 3, RI_ALL_ONLINE }, { 0x105250, 3, RI_ALL_ONLINE },
- { 0x105260, 3, RI_ALL_ONLINE }, { 0x105270, 3, RI_ALL_ONLINE },
- { 0x105280, 3, RI_ALL_ONLINE }, { 0x105290, 3, RI_ALL_ONLINE },
- { 0x1052a0, 3, RI_ALL_ONLINE }, { 0x1052b0, 3, RI_ALL_ONLINE },
- { 0x1052c0, 3, RI_ALL_ONLINE }, { 0x1052d0, 3, RI_ALL_ONLINE },
- { 0x1052e0, 3, RI_ALL_ONLINE }, { 0x1052f0, 3, RI_ALL_ONLINE },
- { 0x105300, 3, RI_ALL_ONLINE }, { 0x105310, 3, RI_ALL_ONLINE },
- { 0x105320, 3, RI_ALL_ONLINE }, { 0x105330, 3, RI_ALL_ONLINE },
- { 0x105340, 3, RI_ALL_ONLINE }, { 0x105350, 3, RI_ALL_ONLINE },
- { 0x105360, 3, RI_ALL_ONLINE }, { 0x105370, 3, RI_ALL_ONLINE },
- { 0x105380, 3, RI_ALL_ONLINE }, { 0x105390, 3, RI_ALL_ONLINE },
- { 0x1053a0, 3, RI_ALL_ONLINE }, { 0x1053b0, 3, RI_ALL_ONLINE },
- { 0x1053c0, 3, RI_ALL_ONLINE }, { 0x1053d0, 3, RI_ALL_ONLINE },
- { 0x1053e0, 3, RI_ALL_ONLINE }, { 0x1053f0, 3, RI_ALL_ONLINE },
- { 0x108094, 1, RI_ALL_ONLINE }, { 0x1201b0, 2, RI_ALL_ONLINE },
- { 0x12032c, 1, RI_ALL_ONLINE }, { 0x12036c, 3, RI_ALL_ONLINE },
- { 0x120408, 2, RI_ALL_ONLINE }, { 0x120414, 15, RI_ALL_ONLINE },
- { 0x120478, 2, RI_ALL_ONLINE }, { 0x12052c, 1, RI_ALL_ONLINE },
- { 0x120564, 3, RI_ALL_ONLINE }, { 0x12057c, 1, RI_ALL_ONLINE },
- { 0x12058c, 1, RI_ALL_ONLINE }, { 0x120608, 1, RI_E1H_ONLINE },
- { 0x120808, 1, RI_E1_ONLINE }, { 0x12080c, 2, RI_ALL_ONLINE },
+ { 0x105000, 256, RI_ALL_ONLINE }, { 0x108094, 1, RI_E1E1H_ONLINE },
+ { 0x1201b0, 2, RI_ALL_ONLINE }, { 0x12032c, 1, RI_ALL_ONLINE },
+ { 0x12036c, 3, RI_ALL_ONLINE }, { 0x120408, 2, RI_ALL_ONLINE },
+ { 0x120414, 15, RI_ALL_ONLINE }, { 0x120478, 2, RI_ALL_ONLINE },
+ { 0x12052c, 1, RI_ALL_ONLINE }, { 0x120564, 3, RI_ALL_ONLINE },
+ { 0x12057c, 1, RI_ALL_ONLINE }, { 0x12058c, 1, RI_ALL_ONLINE },
+ { 0x120608, 1, RI_E1HE2_ONLINE }, { 0x120738, 1, RI_E2_ONLINE },
+ { 0x120778, 2, RI_E2_ONLINE }, { 0x120808, 3, RI_ALL_ONLINE },
{ 0x120818, 1, RI_ALL_ONLINE }, { 0x120820, 1, RI_ALL_ONLINE },
{ 0x120828, 1, RI_ALL_ONLINE }, { 0x120830, 1, RI_ALL_ONLINE },
{ 0x120838, 1, RI_ALL_ONLINE }, { 0x120840, 1, RI_ALL_ONLINE },
@@ -462,48 +580,50 @@ static const struct reg_addr idle_addrs[IDLE_REGS_COUNT] = {
{ 0x1208d8, 1, RI_ALL_ONLINE }, { 0x1208e0, 1, RI_ALL_ONLINE },
{ 0x1208e8, 1, RI_ALL_ONLINE }, { 0x1208f0, 1, RI_ALL_ONLINE },
{ 0x1208f8, 1, RI_ALL_ONLINE }, { 0x120900, 1, RI_ALL_ONLINE },
- { 0x120908, 1, RI_ALL_ONLINE }, { 0x14005c, 2, RI_ALL_ONLINE },
- { 0x1400d0, 2, RI_ALL_ONLINE }, { 0x1400e0, 1, RI_ALL_ONLINE },
- { 0x1401c8, 1, RI_ALL_ONLINE }, { 0x140200, 6, RI_ALL_ONLINE },
- { 0x16101c, 1, RI_ALL_ONLINE }, { 0x16102c, 1, RI_ALL_ONLINE },
- { 0x164014, 2, RI_ALL_ONLINE }, { 0x1640f0, 1, RI_ALL_ONLINE },
- { 0x166290, 1, RI_ALL_ONLINE }, { 0x1662a0, 1, RI_ALL_ONLINE },
- { 0x1662b0, 1, RI_ALL_ONLINE }, { 0x166548, 1, RI_ALL_ONLINE },
- { 0x166550, 1, RI_ALL_ONLINE }, { 0x166558, 1, RI_ALL_ONLINE },
- { 0x168000, 1, RI_ALL_ONLINE }, { 0x168008, 1, RI_ALL_ONLINE },
- { 0x168010, 1, RI_ALL_ONLINE }, { 0x168018, 1, RI_ALL_ONLINE },
- { 0x168028, 2, RI_ALL_ONLINE }, { 0x168058, 4, RI_ALL_ONLINE },
- { 0x168070, 1, RI_ALL_ONLINE }, { 0x168238, 1, RI_ALL_ONLINE },
- { 0x1682d0, 2, RI_ALL_ONLINE }, { 0x1682e0, 1, RI_ALL_ONLINE },
- { 0x168300, 67, RI_ALL_ONLINE }, { 0x168410, 2, RI_ALL_ONLINE },
+ { 0x120908, 1, RI_ALL_ONLINE }, { 0x120940, 5, RI_E2_ONLINE },
+ { 0x130030, 1, RI_E2_ONLINE }, { 0x13004c, 3, RI_E2_ONLINE },
+ { 0x130064, 2, RI_E2_ONLINE }, { 0x13009c, 1, RI_E2_ONLINE },
+ { 0x130130, 1, RI_E2_ONLINE }, { 0x13016c, 1, RI_E2_ONLINE },
+ { 0x130300, 1, RI_E2_ONLINE }, { 0x130480, 1, RI_E2_ONLINE },
+ { 0x14005c, 2, RI_ALL_ONLINE }, { 0x1400d0, 2, RI_ALL_ONLINE },
+ { 0x1400e0, 1, RI_ALL_ONLINE }, { 0x1401c8, 1, RI_ALL_ONLINE },
+ { 0x140200, 6, RI_ALL_ONLINE }, { 0x16101c, 1, RI_ALL_ONLINE },
+ { 0x16102c, 1, RI_ALL_ONLINE }, { 0x164014, 2, RI_ALL_ONLINE },
+ { 0x1640f0, 1, RI_ALL_ONLINE }, { 0x166290, 1, RI_ALL_ONLINE },
+ { 0x1662a0, 1, RI_ALL_ONLINE }, { 0x1662b0, 1, RI_ALL_ONLINE },
+ { 0x166548, 1, RI_ALL_ONLINE }, { 0x166550, 1, RI_ALL_ONLINE },
+ { 0x166558, 1, RI_ALL_ONLINE }, { 0x168000, 1, RI_ALL_ONLINE },
+ { 0x168008, 1, RI_ALL_ONLINE }, { 0x168010, 1, RI_ALL_ONLINE },
+ { 0x168018, 1, RI_ALL_ONLINE }, { 0x168028, 2, RI_ALL_ONLINE },
+ { 0x168058, 4, RI_ALL_ONLINE }, { 0x168070, 1, RI_ALL_ONLINE },
+ { 0x168238, 1, RI_ALL_ONLINE }, { 0x1682d0, 2, RI_ALL_ONLINE },
+ { 0x1682e0, 1, RI_ALL_ONLINE }, { 0x168300, 2, RI_E1E1H_ONLINE },
+ { 0x168308, 65, RI_ALL_ONLINE }, { 0x168410, 2, RI_ALL_ONLINE },
{ 0x168438, 1, RI_ALL_ONLINE }, { 0x168448, 1, RI_ALL_ONLINE },
{ 0x168a00, 128, RI_ALL_ONLINE }, { 0x16e200, 128, RI_E1H_ONLINE },
- { 0x16e404, 2, RI_E1H_ONLINE }, { 0x16e584, 70, RI_E1H_ONLINE },
- { 0x1700a4, 1, RI_ALL_ONLINE }, { 0x1700ac, 2, RI_ALL_ONLINE },
- { 0x1700c0, 1, RI_ALL_ONLINE }, { 0x170174, 1, RI_ALL_ONLINE },
- { 0x170184, 1, RI_ALL_ONLINE }, { 0x1800f4, 1, RI_ALL_ONLINE },
- { 0x180104, 1, RI_ALL_ONLINE }, { 0x180114, 1, RI_ALL_ONLINE },
- { 0x180124, 1, RI_ALL_ONLINE }, { 0x18026c, 1, RI_ALL_ONLINE },
- { 0x1802a0, 1, RI_ALL_ONLINE }, { 0x1a1000, 1, RI_ALL_ONLINE },
- { 0x1aa000, 1, RI_E1H_ONLINE }, { 0x1b8000, 1, RI_ALL_ONLINE },
- { 0x1b8040, 1, RI_ALL_ONLINE }, { 0x1b8080, 1, RI_ALL_ONLINE },
- { 0x1b80c0, 1, RI_ALL_ONLINE }, { 0x200104, 1, RI_ALL_ONLINE },
- { 0x200114, 1, RI_ALL_ONLINE }, { 0x200124, 1, RI_ALL_ONLINE },
- { 0x200134, 1, RI_ALL_ONLINE }, { 0x20026c, 1, RI_ALL_ONLINE },
- { 0x2002a0, 1, RI_ALL_ONLINE }, { 0x221000, 1, RI_ALL_ONLINE },
- { 0x227000, 1, RI_E1H_ONLINE }, { 0x238000, 1, RI_ALL_ONLINE },
- { 0x238040, 1, RI_ALL_ONLINE }, { 0x238080, 1, RI_ALL_ONLINE },
- { 0x2380c0, 1, RI_ALL_ONLINE }, { 0x280104, 1, RI_ALL_ONLINE },
- { 0x280114, 1, RI_ALL_ONLINE }, { 0x280124, 1, RI_ALL_ONLINE },
- { 0x280134, 1, RI_ALL_ONLINE }, { 0x28026c, 1, RI_ALL_ONLINE },
- { 0x2802a0, 1, RI_ALL_ONLINE }, { 0x2a1000, 1, RI_ALL_ONLINE },
- { 0x2a9000, 1, RI_E1H_ONLINE }, { 0x2b8000, 1, RI_ALL_ONLINE },
- { 0x2b8040, 1, RI_ALL_ONLINE }, { 0x2b8080, 1, RI_ALL_ONLINE },
- { 0x2b80c0, 1, RI_ALL_ONLINE }, { 0x300104, 1, RI_ALL_ONLINE },
+ { 0x16e404, 2, RI_E1H_ONLINE }, { 0x16e584, 64, RI_E1H_ONLINE },
+ { 0x16e684, 2, RI_E1HE2_ONLINE }, { 0x16e68c, 4, RI_E1H_ONLINE },
+ { 0x16e6fc, 4, RI_E2_ONLINE }, { 0x1700a4, 1, RI_ALL_ONLINE },
+ { 0x1700ac, 2, RI_ALL_ONLINE }, { 0x1700c0, 1, RI_ALL_ONLINE },
+ { 0x170174, 1, RI_ALL_ONLINE }, { 0x170184, 1, RI_ALL_ONLINE },
+ { 0x1800f4, 1, RI_ALL_ONLINE }, { 0x180104, 1, RI_ALL_ONLINE },
+ { 0x180114, 1, RI_ALL_ONLINE }, { 0x180124, 1, RI_ALL_ONLINE },
+ { 0x18026c, 1, RI_ALL_ONLINE }, { 0x1802a0, 1, RI_ALL_ONLINE },
+ { 0x1b8000, 1, RI_ALL_ONLINE }, { 0x1b8040, 1, RI_ALL_ONLINE },
+ { 0x1b8080, 1, RI_ALL_ONLINE }, { 0x1b80c0, 1, RI_ALL_ONLINE },
+ { 0x200104, 1, RI_ALL_ONLINE }, { 0x200114, 1, RI_ALL_ONLINE },
+ { 0x200124, 1, RI_ALL_ONLINE }, { 0x200134, 1, RI_ALL_ONLINE },
+ { 0x20026c, 1, RI_ALL_ONLINE }, { 0x2002a0, 1, RI_ALL_ONLINE },
+ { 0x238000, 1, RI_ALL_ONLINE }, { 0x238040, 1, RI_ALL_ONLINE },
+ { 0x238080, 1, RI_ALL_ONLINE }, { 0x2380c0, 1, RI_ALL_ONLINE },
+ { 0x280104, 1, RI_ALL_ONLINE }, { 0x280114, 1, RI_ALL_ONLINE },
+ { 0x280124, 1, RI_ALL_ONLINE }, { 0x280134, 1, RI_ALL_ONLINE },
+ { 0x28026c, 1, RI_ALL_ONLINE }, { 0x2802a0, 1, RI_ALL_ONLINE },
+ { 0x2b8000, 1, RI_ALL_ONLINE }, { 0x2b8040, 1, RI_ALL_ONLINE },
+ { 0x2b8080, 1, RI_ALL_ONLINE }, { 0x300104, 1, RI_ALL_ONLINE },
{ 0x300114, 1, RI_ALL_ONLINE }, { 0x300124, 1, RI_ALL_ONLINE },
{ 0x300134, 1, RI_ALL_ONLINE }, { 0x30026c, 1, RI_ALL_ONLINE },
- { 0x3002a0, 1, RI_ALL_ONLINE }, { 0x321000, 1, RI_ALL_ONLINE },
- { 0x328960, 1, RI_E1H_ONLINE }, { 0x338000, 1, RI_ALL_ONLINE },
+ { 0x3002a0, 1, RI_ALL_ONLINE }, { 0x338000, 1, RI_ALL_ONLINE },
{ 0x338040, 1, RI_ALL_ONLINE }, { 0x338080, 1, RI_ALL_ONLINE },
{ 0x3380c0, 1, RI_ALL_ONLINE }
};
@@ -515,7 +635,6 @@ static const struct wreg_addr wreg_addrs_e1[WREGS_COUNT_E1] = {
{ 0x1b0c00, 192, 1, read_reg_e1_0, RI_E1_OFFLINE }
};
-
#define WREGS_COUNT_E1H 1
static const u32 read_reg_e1h_0[] = { 0x1b1040, 0x1b1000 };
@@ -530,22 +649,53 @@ static const struct wreg_addr wreg_addrs_e2[WREGS_COUNT_E2] = {
{ 0x1b0c00, 128, 2, read_reg_e2_0, RI_E2_OFFLINE }
};
-static const struct dump_sign dump_sign_all = { 0x49aa93ee, 0x40835, 0x22 };
-
+static const struct dump_sign dump_sign_all = { 0x4d18b0a4, 0x60010, 0x3a };
#define TIMER_REGS_COUNT_E1 2
-static const u32 timer_status_regs_e1[TIMER_REGS_COUNT_E1] =
- { 0x164014, 0x164018 };
-static const u32 timer_scan_regs_e1[TIMER_REGS_COUNT_E1] =
- { 0x1640d0, 0x1640d4 };
+static const u32 timer_status_regs_e1[TIMER_REGS_COUNT_E1] = {
+ 0x164014, 0x164018 };
+static const u32 timer_scan_regs_e1[TIMER_REGS_COUNT_E1] = {
+ 0x1640d0, 0x1640d4 };
#define TIMER_REGS_COUNT_E1H 2
-static const u32 timer_status_regs_e1h[TIMER_REGS_COUNT_E1H] =
- { 0x164014, 0x164018 };
-static const u32 timer_scan_regs_e1h[TIMER_REGS_COUNT_E1H] =
- { 0x1640d0, 0x1640d4 };
+static const u32 timer_status_regs_e1h[TIMER_REGS_COUNT_E1H] = {
+ 0x164014, 0x164018 };
+static const u32 timer_scan_regs_e1h[TIMER_REGS_COUNT_E1H] = {
+ 0x1640d0, 0x1640d4 };
+
+#define TIMER_REGS_COUNT_E2 2
+
+static const u32 timer_status_regs_e2[TIMER_REGS_COUNT_E2] = {
+ 0x164014, 0x164018 };
+static const u32 timer_scan_regs_e2[TIMER_REGS_COUNT_E2] = {
+ 0x1640d0, 0x1640d4 };
+
+#define PAGE_MODE_VALUES_E1 0
+
+#define PAGE_READ_REGS_E1 0
+
+#define PAGE_WRITE_REGS_E1 0
+
+static const u32 page_vals_e1[] = { 0 };
+
+static const u32 page_write_regs_e1[] = { 0 };
+
+static const struct reg_addr page_read_regs_e1[] = { { 0x0, 0, RI_E1_ONLINE } };
+
+#define PAGE_MODE_VALUES_E1H 0
+
+#define PAGE_READ_REGS_E1H 0
+
+#define PAGE_WRITE_REGS_E1H 0
+
+static const u32 page_vals_e1h[] = { 0 };
+
+static const u32 page_write_regs_e1h[] = { 0 };
+
+static const struct reg_addr page_read_regs_e1h[] = {
+ { 0x0, 0, RI_E1H_ONLINE } };
#define PAGE_MODE_VALUES_E2 2
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index d02ffbd..2b3a179 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -24,6 +24,7 @@
#include "bnx2x.h"
#include "bnx2x_cmn.h"
#include "bnx2x_dump.h"
+#include "bnx2x_init.h"
static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
@@ -303,7 +304,7 @@ static int bnx2x_get_regs_len(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
int regdump_len = 0;
- int i;
+ int i, j, k;
if (CHIP_IS_E1(bp)) {
for (i = 0; i < REGS_COUNT; i++)
@@ -333,6 +334,15 @@ static int bnx2x_get_regs_len(struct net_device *dev)
if (IS_E2_ONLINE(wreg_addrs_e2[i].info))
regdump_len += wreg_addrs_e2[i].size *
(1 + wreg_addrs_e2[i].read_regs_count);
+
+ for (i = 0; i < PAGE_MODE_VALUES_E2; i++)
+ for (j = 0; j < PAGE_WRITE_REGS_E2; j++) {
+ for (k = 0; k < PAGE_READ_REGS_E2; k++)
+ if (IS_E2_ONLINE(page_read_regs_e2[k].
+ info))
+ regdump_len +=
+ page_read_regs_e2[k].size;
+ }
}
regdump_len *= 4;
regdump_len += sizeof(struct dump_hdr);
@@ -370,6 +380,12 @@ static void bnx2x_get_regs(struct net_device *dev,
if (!netif_running(bp->dev))
return;
+ /* Disable parity attentions as long as following dump may
+ * cause false alarms by reading never written registers. We
+ * will re-enable parity attentions right after the dump.
+ */
+ bnx2x_disable_blocks_parity(bp);
+
dump_hdr.hdr_size = (sizeof(struct dump_hdr) / 4) - 1;
dump_hdr.dump_sign = dump_sign_all;
dump_hdr.xstorm_waitp = REG_RD(bp, XSTORM_WAITP_ADDR);
@@ -411,6 +427,10 @@ static void bnx2x_get_regs(struct net_device *dev,
bnx2x_read_pages_regs_e2(bp, p);
}
+ /* Re-enable parity attentions */
+ bnx2x_clear_blocks_parity(bp);
+ if (CHIP_PARITY_ENABLED(bp))
+ bnx2x_enable_blocks_parity(bp);
}
#define PHY_FW_VER_LEN 20
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/bnx2x/bnx2x_init.h
index a9d5487..5a268e9 100644
--- a/drivers/net/bnx2x/bnx2x_init.h
+++ b/drivers/net/bnx2x/bnx2x_init.h
@@ -192,5 +192,225 @@ struct src_ent {
u64 next;
};
+/****************************************************************************
+* Parity configuration
+****************************************************************************/
+#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2) \
+{ \
+ block##_REG_##block##_PRTY_MASK, \
+ block##_REG_##block##_PRTY_STS_CLR, \
+ en_mask, {m1, m1h, m2}, #block \
+}
+
+#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2) \
+{ \
+ block##_REG_##block##_PRTY_MASK_0, \
+ block##_REG_##block##_PRTY_STS_CLR_0, \
+ en_mask, {m1, m1h, m2}, #block"_0" \
+}
+
+#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2) \
+{ \
+ block##_REG_##block##_PRTY_MASK_1, \
+ block##_REG_##block##_PRTY_STS_CLR_1, \
+ en_mask, {m1, m1h, m2}, #block"_1" \
+}
+
+static const struct {
+ u32 mask_addr;
+ u32 sts_clr_addr;
+ u32 en_mask; /* Mask to enable parity attentions */
+ struct {
+ u32 e1; /* 57710 */
+ u32 e1h; /* 57711 */
+ u32 e2; /* 57712 */
+ } reg_mask; /* Register mask (all valid bits) */
+ char name[7]; /* Block's longest name is 6 characters long
+ * (name + suffix)
+ */
+} bnx2x_blocks_parity_data[] = {
+ /* bit 19 masked */
+ /* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
+ /* bit 5,18,20-31 */
+ /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
+ /* bit 5 */
+ /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */
+ /* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
+ /* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
+
+ /* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
+ * want to handle "system kill" flow at the moment.
+ */
+ BLOCK_PRTY_INFO(PXP, 0x3ffffff, 0x3ffffff, 0x3ffffff, 0x3ffffff),
+ BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
+ BLOCK_PRTY_INFO_1(PXP2, 0x7ff, 0x7f, 0x7f, 0x7ff),
+ BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
+ BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff),
+ BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1),
+ BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff),
+ BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3),
+ {GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
+ GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0,
+ {0xf, 0xf, 0xf}, "UPB"},
+ {GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
+ GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
+ {0xf, 0xf, 0xf}, "XPB"},
+ BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7),
+ BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f),
+ BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf),
+ BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1),
+ BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf),
+ BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf),
+ BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff),
+ BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff),
+ BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+ BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff),
+ BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+ BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+ BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f),
+ BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+ BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f),
+ BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+ BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f),
+ BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+ BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f),
+};
+
+
+/* [28] MCP Latched rom_parity
+ * [29] MCP Latched ump_rx_parity
+ * [30] MCP Latched ump_tx_parity
+ * [31] MCP Latched scpad_parity
+ */
+#define MISC_AEU_ENABLE_MCP_PRTY_BITS \
+ (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
+
+/* Below registers control the MCP parity attention output. When
+ * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
+ * enabled, when cleared - disabled.
+ */
+static const u32 mcp_attn_ctl_regs[] = {
+ MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
+ MISC_REG_AEU_ENABLE4_NIG_0,
+ MISC_REG_AEU_ENABLE4_PXP_0,
+ MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
+ MISC_REG_AEU_ENABLE4_NIG_1,
+ MISC_REG_AEU_ENABLE4_PXP_1
+};
+
+static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
+{
+ int i;
+ u32 reg_val;
+
+ for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
+ reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
+
+ if (enable)
+ reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
+ else
+ reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
+
+ REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
+ }
+}
+
+static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx)
+{
+ if (CHIP_IS_E1(bp))
+ return bnx2x_blocks_parity_data[idx].reg_mask.e1;
+ else if (CHIP_IS_E1H(bp))
+ return bnx2x_blocks_parity_data[idx].reg_mask.e1h;
+ else
+ return bnx2x_blocks_parity_data[idx].reg_mask.e2;
+}
+
+static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+ u32 dis_mask = bnx2x_parity_reg_mask(bp, i);
+
+ if (dis_mask) {
+ REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
+ dis_mask);
+ DP(NETIF_MSG_HW, "Setting parity mask "
+ "for %s to\t\t0x%x\n",
+ bnx2x_blocks_parity_data[i].name, dis_mask);
+ }
+ }
+
+ /* Disable MCP parity attentions */
+ bnx2x_set_mcp_parity(bp, false);
+}
+
+/**
+ * Clear the parity error status registers.
+ */
+static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp)
+{
+ int i;
+ u32 reg_val, mcp_aeu_bits =
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
+
+ /* Clear SEM_FAST parities */
+ REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+ REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+ REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+ REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+
+ for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+ u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
+
+ if (reg_mask) {
+ reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i].
+ sts_clr_addr);
+ if (reg_val & reg_mask)
+ DP(NETIF_MSG_HW,
+ "Parity errors in %s: 0x%x\n",
+ bnx2x_blocks_parity_data[i].name,
+ reg_val & reg_mask);
+ }
+ }
+
+ /* Check if there were parity attentions in MCP */
+ reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP);
+ if (reg_val & mcp_aeu_bits)
+ DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n",
+ reg_val & mcp_aeu_bits);
+
+ /* Clear parity attentions in MCP:
+ * [7] clears Latched rom_parity
+ * [8] clears Latched ump_rx_parity
+ * [9] clears Latched ump_tx_parity
+ * [10] clears Latched scpad_parity (both ports)
+ */
+ REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
+}
+
+static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+ u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
+
+ if (reg_mask)
+ REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
+ bnx2x_blocks_parity_data[i].en_mask & reg_mask);
+ }
+
+ /* Enable MCP parity attentions */
+ bnx2x_set_mcp_parity(bp, true);
+}
+
+
#endif /* BNX2X_INIT_H */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 972b957..2689f02 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -3066,7 +3066,6 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
#define LOAD_COUNTER_MASK (((u32)0x1 << LOAD_COUNTER_BITS) - 1)
#define RESET_DONE_FLAG_MASK (~LOAD_COUNTER_MASK)
#define RESET_DONE_FLAG_SHIFT LOAD_COUNTER_BITS
-#define CHIP_PARITY_SUPPORTED(bp) (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
/*
* should be run under rtnl lock
@@ -3441,7 +3440,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
try to handle this event */
bnx2x_acquire_alr(bp);
- if (bnx2x_chk_parity_attn(bp)) {
+ if (CHIP_PARITY_ENABLED(bp) && bnx2x_chk_parity_attn(bp)) {
bp->recovery_state = BNX2X_RECOVERY_INIT;
bnx2x_set_reset_in_progress(bp);
schedule_delayed_work(&bp->reset_task, 0);
@@ -4619,7 +4618,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
return 0; /* OK */
}
-static void enable_blocks_attention(struct bnx2x *bp)
+static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
{
REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
if (CHIP_IS_E2(bp))
@@ -4673,53 +4672,9 @@ static void enable_blocks_attention(struct bnx2x *bp)
REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
- REG_WR(bp, PBF_REG_PBF_INT_MASK, 0X18); /* bit 3,4 masked */
+ REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
}
-static const struct {
- u32 addr;
- u32 mask;
-} bnx2x_parity_mask[] = {
- {PXP_REG_PXP_PRTY_MASK, 0x3ffffff},
- {PXP2_REG_PXP2_PRTY_MASK_0, 0xffffffff},
- {PXP2_REG_PXP2_PRTY_MASK_1, 0x7f},
- {HC_REG_HC_PRTY_MASK, 0x7},
- {MISC_REG_MISC_PRTY_MASK, 0x1},
- {QM_REG_QM_PRTY_MASK, 0x0},
- {DORQ_REG_DORQ_PRTY_MASK, 0x0},
- {GRCBASE_UPB + PB_REG_PB_PRTY_MASK, 0x0},
- {GRCBASE_XPB + PB_REG_PB_PRTY_MASK, 0x0},
- {SRC_REG_SRC_PRTY_MASK, 0x4}, /* bit 2 */
- {CDU_REG_CDU_PRTY_MASK, 0x0},
- {CFC_REG_CFC_PRTY_MASK, 0x0},
- {DBG_REG_DBG_PRTY_MASK, 0x0},
- {DMAE_REG_DMAE_PRTY_MASK, 0x0},
- {BRB1_REG_BRB1_PRTY_MASK, 0x0},
- {PRS_REG_PRS_PRTY_MASK, (1<<6)},/* bit 6 */
- {TSDM_REG_TSDM_PRTY_MASK, 0x18}, /* bit 3,4 */
- {CSDM_REG_CSDM_PRTY_MASK, 0x8}, /* bit 3 */
- {USDM_REG_USDM_PRTY_MASK, 0x38}, /* bit 3,4,5 */
- {XSDM_REG_XSDM_PRTY_MASK, 0x8}, /* bit 3 */
- {TSEM_REG_TSEM_PRTY_MASK_0, 0x0},
- {TSEM_REG_TSEM_PRTY_MASK_1, 0x0},
- {USEM_REG_USEM_PRTY_MASK_0, 0x0},
- {USEM_REG_USEM_PRTY_MASK_1, 0x0},
- {CSEM_REG_CSEM_PRTY_MASK_0, 0x0},
- {CSEM_REG_CSEM_PRTY_MASK_1, 0x0},
- {XSEM_REG_XSEM_PRTY_MASK_0, 0x0},
- {XSEM_REG_XSEM_PRTY_MASK_1, 0x0}
-};
-
-static void enable_blocks_parity(struct bnx2x *bp)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(bnx2x_parity_mask); i++)
- REG_WR(bp, bnx2x_parity_mask[i].addr,
- bnx2x_parity_mask[i].mask);
-}
-
-
static void bnx2x_reset_common(struct bnx2x *bp)
{
/* reset_common */
@@ -5215,9 +5170,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
/* clear PXP2 attentions */
REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
- enable_blocks_attention(bp);
- if (CHIP_PARITY_SUPPORTED(bp))
- enable_blocks_parity(bp);
+ bnx2x_enable_blocks_attention(bp);
+ if (CHIP_PARITY_ENABLED(bp))
+ bnx2x_enable_blocks_parity(bp);
if (!BP_NOMCP(bp)) {
/* In E2 2-PORT mode, same ext phy is used for the two paths */
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1cefe48..896e88a 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -18,6 +18,8 @@
* WR - Write Clear (write 1 to clear the bit)
*
*/
+#ifndef BNX2X_REG_H
+#define BNX2X_REG_H
#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2)
@@ -39,6 +41,8 @@
#define BRB1_REG_BRB1_PRTY_MASK 0x60138
/* [R 4] Parity register #0 read */
#define BRB1_REG_BRB1_PRTY_STS 0x6012c
+/* [RC 4] Parity register #0 read clear */
+#define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130
/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
* address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
* BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
@@ -132,8 +136,12 @@
#define CCM_REG_CCM_INT_MASK 0xd01e4
/* [R 11] Interrupt register #0 read */
#define CCM_REG_CCM_INT_STS 0xd01d8
+/* [RW 27] Parity mask register #0 read/write */
+#define CCM_REG_CCM_PRTY_MASK 0xd01f4
/* [R 27] Parity register #0 read */
#define CCM_REG_CCM_PRTY_STS 0xd01e8
+/* [RC 27] Parity register #0 read clear */
+#define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -350,6 +358,8 @@
#define CDU_REG_CDU_PRTY_MASK 0x10104c
/* [R 5] Parity register #0 read */
#define CDU_REG_CDU_PRTY_STS 0x101040
+/* [RC 5] Parity register #0 read clear */
+#define CDU_REG_CDU_PRTY_STS_CLR 0x101044
/* [RC 32] logging of error data in case of a CDU load error:
{expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
ype_error; ctual_active; ctual_compressed_context}; */
@@ -381,6 +391,8 @@
#define CFC_REG_CFC_PRTY_MASK 0x104118
/* [R 4] Parity register #0 read */
#define CFC_REG_CFC_PRTY_STS 0x10410c
+/* [RC 4] Parity register #0 read clear */
+#define CFC_REG_CFC_PRTY_STS_CLR 0x104110
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
#define CFC_REG_CID_CAM 0x104800
#define CFC_REG_CONTROL0 0x104028
@@ -466,6 +478,8 @@
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
/* [R 11] Parity register #0 read */
#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
+/* [RC 11] Parity register #0 read clear */
+#define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4
#define CSDM_REG_ENABLE_IN1 0xc2238
#define CSDM_REG_ENABLE_IN2 0xc223c
#define CSDM_REG_ENABLE_OUT1 0xc2240
@@ -556,6 +570,9 @@
/* [R 32] Parity register #0 read */
#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
+/* [RC 32] Parity register #0 read clear */
+#define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128
+#define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138
#define CSEM_REG_ENABLE_IN 0x2000a4
#define CSEM_REG_ENABLE_OUT 0x2000a8
/* [RW 32] This address space contains all registers and memories that are
@@ -648,6 +665,8 @@
#define DBG_REG_DBG_PRTY_MASK 0xc0a8
/* [R 1] Parity register #0 read */
#define DBG_REG_DBG_PRTY_STS 0xc09c
+/* [RC 1] Parity register #0 read clear */
+#define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0
/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
* function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
* 4.Completion function=0; 5.Error handling=0 */
@@ -668,6 +687,8 @@
#define DMAE_REG_DMAE_PRTY_MASK 0x102064
/* [R 4] Parity register #0 read */
#define DMAE_REG_DMAE_PRTY_STS 0x102058
+/* [RC 4] Parity register #0 read clear */
+#define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c
/* [RW 1] Command 0 go. */
#define DMAE_REG_GO_C0 0x102080
/* [RW 1] Command 1 go. */
@@ -734,6 +755,8 @@
#define DORQ_REG_DORQ_PRTY_MASK 0x170190
/* [R 2] Parity register #0 read */
#define DORQ_REG_DORQ_PRTY_STS 0x170184
+/* [RC 2] Parity register #0 read clear */
+#define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188
/* [RW 8] The address to write the DPM CID to STORM. */
#define DORQ_REG_DPM_CID_ADDR 0x170044
/* [RW 5] The DPM mode CID extraction offset. */
@@ -842,8 +865,12 @@
/* [R 1] data availble for error memory. If this bit is clear do not red
* from error_handling_memory. */
#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130
+/* [RW 11] Parity mask register #0 read/write */
+#define IGU_REG_IGU_PRTY_MASK 0x1300a8
/* [R 11] Parity register #0 read */
#define IGU_REG_IGU_PRTY_STS 0x13009c
+/* [RC 11] Parity register #0 read clear */
+#define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0
/* [R 4] Debug: int_handle_fsm */
#define IGU_REG_INT_HANDLE_FSM 0x130050
#define IGU_REG_LEADING_EDGE_LATCH 0x130134
@@ -1501,6 +1528,8 @@
#define MISC_REG_MISC_PRTY_MASK 0xa398
/* [R 1] Parity register #0 read */
#define MISC_REG_MISC_PRTY_STS 0xa38c
+/* [RC 1] Parity register #0 read clear */
+#define MISC_REG_MISC_PRTY_STS_CLR 0xa390
#define MISC_REG_NIG_WOL_P0 0xa270
#define MISC_REG_NIG_WOL_P1 0xa274
/* [R 1] If set indicate that the pcie_rst_b was asserted without perst
@@ -2046,6 +2075,10 @@
#define PBF_REG_PBF_INT_MASK 0x1401d4
/* [R 5] Interrupt register #0 read */
#define PBF_REG_PBF_INT_STS 0x1401c8
+/* [RW 20] Parity mask register #0 read/write */
+#define PBF_REG_PBF_PRTY_MASK 0x1401e4
+/* [RC 20] Parity register #0 read clear */
+#define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc
#define PB_REG_CONTROL 0
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK 0x28
@@ -2055,6 +2088,8 @@
#define PB_REG_PB_PRTY_MASK 0x38
/* [R 4] Parity register #0 read */
#define PB_REG_PB_PRTY_STS 0x2c
+/* [RC 4] Parity register #0 read clear */
+#define PB_REG_PB_PRTY_STS_CLR 0x30
#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8)
#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1)
@@ -2410,6 +2445,8 @@
#define PRS_REG_PRS_PRTY_MASK 0x401a4
/* [R 8] Parity register #0 read */
#define PRS_REG_PRS_PRTY_STS 0x40198
+/* [RC 8] Parity register #0 read clear */
+#define PRS_REG_PRS_PRTY_STS_CLR 0x4019c
/* [RW 8] Context region for pure acknowledge packets. Used in CFC load
request message */
#define PRS_REG_PURE_REGIONS 0x40024
@@ -2563,6 +2600,9 @@
/* [R 32] Parity register #0 read */
#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
+/* [RC 32] Parity register #0 read clear */
+#define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580
+#define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590
/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
indication about backpressure) */
#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
@@ -2965,6 +3005,8 @@
#define PXP_REG_PXP_PRTY_MASK 0x103094
/* [R 26] Parity register #0 read */
#define PXP_REG_PXP_PRTY_STS 0x103088
+/* [RC 27] Parity register #0 read clear */
+#define PXP_REG_PXP_PRTY_STS_CLR 0x10308c
/* [RW 4] The activity counter initial increment value sent in the load
request */
#define QM_REG_ACTCTRINITVAL_0 0x168040
@@ -3121,6 +3163,8 @@
#define QM_REG_QM_PRTY_MASK 0x168454
/* [R 12] Parity register #0 read */
#define QM_REG_QM_PRTY_STS 0x168448
+/* [RC 12] Parity register #0 read clear */
+#define QM_REG_QM_PRTY_STS_CLR 0x16844c
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH 0x16802c
/* [R 32] Current queues in pipeline: Queues from 96 to 127 */
@@ -3406,6 +3450,8 @@
#define QM_REG_WRRWEIGHTS_9 0x168848
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
+/* [W 1] reset to parity interrupt */
+#define SEM_FAST_REG_PARITY_RST 0x18840
#define SRC_REG_COUNTFREE0 0x40500
/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
ports. If set the searcher support 8 functions. */
@@ -3434,6 +3480,8 @@
#define SRC_REG_SRC_PRTY_MASK 0x404c8
/* [R 3] Parity register #0 read */
#define SRC_REG_SRC_PRTY_STS 0x404bc
+/* [RC 3] Parity register #0 read clear */
+#define SRC_REG_SRC_PRTY_STS_CLR 0x404c0
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
#define TCM_REG_CAM_OCCUP 0x5017c
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3560,8 +3608,12 @@
#define TCM_REG_TCM_INT_MASK 0x501dc
/* [R 11] Interrupt register #0 read */
#define TCM_REG_TCM_INT_STS 0x501d0
+/* [RW 27] Parity mask register #0 read/write */
+#define TCM_REG_TCM_PRTY_MASK 0x501ec
/* [R 27] Parity register #0 read */
#define TCM_REG_TCM_PRTY_STS 0x501e0
+/* [RC 27] Parity register #0 read clear */
+#define TCM_REG_TCM_PRTY_STS_CLR 0x501e4
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -3719,6 +3771,10 @@
#define TM_REG_TM_INT_MASK 0x1640fc
/* [R 1] Interrupt register #0 read */
#define TM_REG_TM_INT_STS 0x1640f0
+/* [RW 7] Parity mask register #0 read/write */
+#define TM_REG_TM_PRTY_MASK 0x16410c
+/* [RC 7] Parity register #0 read clear */
+#define TM_REG_TM_PRTY_STS_CLR 0x164104
/* [RW 8] The event id for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
#define TSDM_REG_AGG_INT_EVENT_1 0x4203c
@@ -3799,6 +3855,8 @@
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
/* [R 11] Parity register #0 read */
#define TSDM_REG_TSDM_PRTY_STS 0x422b0
+/* [RC 11] Parity register #0 read clear */
+#define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3878,6 +3936,9 @@
#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
/* [RW 8] List of free threads . There is a bit per thread. */
#define TSEM_REG_THREADS_LIST 0x1802e4
+/* [RC 32] Parity register #0 read clear */
+#define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118
+#define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128
/* [RW 3] The arbitration scheme of time_slot 0 */
#define TSEM_REG_TS_0_AS 0x180038
/* [RW 3] The arbitration scheme of time_slot 10 */
@@ -4080,6 +4141,8 @@
#define UCM_REG_UCM_INT_STS 0xe01c8
/* [R 27] Parity register #0 read */
#define UCM_REG_UCM_PRTY_STS 0xe01d8
+/* [RC 27] Parity register #0 read clear */
+#define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc
/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@@ -4256,6 +4319,8 @@
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
/* [R 11] Parity register #0 read */
#define USDM_REG_USDM_PRTY_STS 0xc42b4
+/* [RC 11] Parity register #0 read clear */
+#define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8
/* [RW 5] The number of time_slots in the arbitration cycle */
#define USEM_REG_ARB_CYCLE_SIZE 0x300034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -4385,6 +4450,9 @@
/* [R 32] Parity register #0 read */
#define USEM_REG_USEM_PRTY_STS_0 0x300124
#define USEM_REG_USEM_PRTY_STS_1 0x300134
+/* [RC 32] Parity register #0 read clear */
+#define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128
+#define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
* VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
#define USEM_REG_VFPF_ERR_NUM 0x300380
@@ -4761,6 +4829,8 @@
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
/* [R 11] Parity register #0 read */
#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
+/* [RC 11] Parity register #0 read clear */
+#define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -4893,6 +4963,9 @@
/* [R 32] Parity register #0 read */
#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
+/* [RC 32] Parity register #0 read clear */
+#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128
+#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
@@ -6264,3 +6337,4 @@ static inline u8 calc_crc8(u32 data, u8 crc)
}
+#endif /* BNX2X_REG_H */
--
1.7.0.4
^ permalink raw reply related
* [PATCH net-2.6 1/5] bnx2x: Don't prevent RSS configuration in INT#x and MSI interrupt modes.
From: Vladislav Zolotarov @ 2011-01-09 12:19 UTC (permalink / raw)
To: Dave Miller; +Cc: netdev list, Eilon Greenstein
Don't prevent RSS configuration in INT#x and MSI interrupt modes. Otherwise
Rx hash key won't be available.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_main.c | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 9709b85..972b957 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -8382,13 +8382,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
dev_err(&bp->pdev->dev, "MCP disabled, "
"must load devices in order!\n");
- /* Set multi queue mode */
- if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
- ((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
- dev_err(&bp->pdev->dev, "Multi disabled since int_mode "
- "requested is not MSI-X\n");
- multi_mode = ETH_RSS_MODE_DISABLED;
- }
bp->multi_mode = multi_mode;
bp->int_mode = int_mode;
--
1.7.0.4
^ permalink raw reply related
* Re: 2.6.37 vlans on bnx2 not functional, panic with tcpdump
From: Iain Paton @ 2011-01-09 11:22 UTC (permalink / raw)
To: Jarek Poplawski
Cc: Michael Chan, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
In-Reply-To: <4D28AFD1.3020808@gmail.com>
Jarek Poplawski wrote:
> Iain Paton wrote:
> ...
>> So you can consider any bnx2 cause for this closed. I'll get back to the
>> list if I can come up with any more useful info.
>
> Hi Iain,
> If it's not a problem, please try if the attached debugging patch
> (not tested) can change anything.
No problem testing with the patch installed, however I'm now unable to duplicate the problem with a rebuilt kernel, with or without
the patch.
The original kernel build I did still fails repeatably, but something as simple as erasing the directory, unpacking the same source
tarball and re-compiling using the same config file gets me a working kernel.
This is somewhat troubling as there must have been some initial cause, but I'm unable to pin it down. Have spent the last day or so
checking toolchain versions, running hardware tests on the physical build server and have come up completely empty.
I think we can safely ignore this now as it appears to be a one-off bad compile, for reasons unknown, but totally unrepeatable.
Thanks to all for your help, and apologies for the noise.
Iain
^ permalink raw reply
* Re: [PATCH net-next-2.6 v3 1/1] can: c_can: Added support for Bosch C_CAN controller
From: Oliver Hartkopp @ 2011-01-09 11:01 UTC (permalink / raw)
To: Wolfgang Grandegger, Tomoya MORINAGA, Bhupesh Sharma
Cc: Socketcan-core-0fE9KPoRgkgATYTw5x5z8w,
netdev-u79uwXL29TY76Z2rM5mHXA, Marc Kleine-Budde, David Miller
In-Reply-To: <4D262158.4030301-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
On 06.01.2011 21:08, Wolfgang Grandegger wrote:
> Hi Marc,
>
> On 01/06/2011 08:44 PM, Marc Kleine-Budde wrote:
>> If this driver will be merged, we'll have two drivers for the same can
>> core in the tree. The other one is the pch_can. What do you think should
>> be the mid term perspective for ccan based hardware?
>
> Yes, I know. Unfortunately, we did realize rather late the the PCH
> controller is a C_CAN clone and the OKI/Intel ppls did not tell us
> either. Therefore I asked Bhupesh to provide a SJA1000-a-like interface
> for the C_CAN, which would allow us to provide an alternative PCI driver
> "pch_pci.c" for the PCH. If that driver works well on the PCH hardware
> as well, we should merge the best of both, if necessary, and then
> finally remove the pch_can driver. Would that be a reasonable proposal.
At least for me this looks great. The idea to have a similar approach as we
successfully implemented for the sja1000 will solve future hardware
implementations based on the ccan controller core.
BTW. for the next submission of Bhupeshs patchset, i would propose to name the
driver 'ccan' instead of 'c_can', so that we have a
linux/drivers/net/can/ccan/...
path.
Checking directory names in linux/drivers with
find . -type d | grep '_'
driver names with underscores are pretty unusual and mostly selected without
fortune:
./staging/olpc_dcon
./staging/wlags49_h2
./staging/wlags49_h2/man
./staging/serqt_usb2
./staging/intel_sst
./staging/quatech_usb2
./staging/asus_oled
./staging/wlags49_h25
./staging/ath6kl/hif/sdio/linux_sdio <- Ugh!
./staging/ath6kl/hif/sdio/linux_sdio/src
./staging/ath6kl/hif/sdio/linux_sdio/include
./net/pch_gbe
./net/fs_enet
./net/wireless/libertas_tf
./net/ibm_newemacds
For that reason i would prefer 'ccan' to name this driver core.
Best regards,
Oliver
^ permalink raw reply
* Re: [PATCH]netdev: add driver for enc424j600 ethernet chip on SPI bus
From: Balaji Venkatachalam @ 2011-01-09 9:00 UTC (permalink / raw)
To: Michał Mirosław
Cc: netdev, mohan, blue.cube, lanconelli.claudio, Sriram Subramanian
In-Reply-To: <AANLkTinosxXKgfkqGKqCLGi8tWeP4xnT1P3kMRu51CvS@mail.gmail.com>
Thanks for the comments. I am working on them. Will post the updated patch soon.
^ permalink raw reply
* [PATCH 6/6] net: fix kernel-doc warning in core/filter.c
From: Randy Dunlap @ 2011-01-09 3:41 UTC (permalink / raw)
To: netdev; +Cc: Linus, davem
From: Randy Dunlap <randy.dunlap@oracle.com>
Fix new kernel-doc notation warning in net/core/filter.c:
Warning(net/core/filter.c:172): No description found for parameter 'fentry'
Warning(net/core/filter.c:172): Excess function parameter 'filter' description in 'sk_run_filter'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
net/core/filter.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- lnx0107.orig/net/core/filter.c
+++ lnx0107/net/core/filter.c
@@ -158,7 +158,7 @@ EXPORT_SYMBOL(sk_filter);
/**
* sk_run_filter - run a filter on a socket
* @skb: buffer to run the filter on
- * @filter: filter to apply
+ * @fentry: filter to apply
*
* Decode and apply filter instructions to the skb->data.
* Return length to keep, 0 for none. @skb is the data we are
^ permalink raw reply
* [PATCH 4/6] net/sock.h: make some fields private to fix kernel-doc warning(s)
From: Randy Dunlap @ 2011-01-09 3:39 UTC (permalink / raw)
To: lkml, Linus; +Cc: netdev, davem
From: Randy Dunlap <randy.dunlap@oracle.com>
Fix new kernel-doc notation warning in sock.h by annotating skc_dontcopy_*
as private fields.
Warning(include/net/sock.h:163): No description found for parameter 'skc_dontcopy_end[0]'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
include/net/sock.h | 4 ++++
1 file changed, 4 insertions(+)
--- lnx0107.orig/include/net/sock.h
+++ lnx0107/include/net/sock.h
@@ -152,14 +152,18 @@ struct sock_common {
* fields between dontcopy_begin/dontcopy_end
* are not copied in sock_copy()
*/
+ /* private: */
int skc_dontcopy_begin[0];
+ /* public: */
union {
struct hlist_node skc_node;
struct hlist_nulls_node skc_nulls_node;
};
int skc_tx_queue_mapping;
atomic_t skc_refcnt;
+ /* private: */
int skc_dontcopy_end[0];
+ /* public: */
};
/**
^ permalink raw reply
* Re: [PATCH 3/5] NET: IPV4: ARP: allow to invalidate specific ARP entries
From: Maxim Levitsky @ 2011-01-08 23:57 UTC (permalink / raw)
To: Eric Dumazet
Cc: linux1394-devel, Stefan Richter, netdev, David S. Miller,
Alexey Kuznetsov, James Morris, Patrick McHardy
In-Reply-To: <1294405062.3306.11.camel@edumazet-laptop>
On Fri, 2011-01-07 at 13:57 +0100, Eric Dumazet wrote:
> Le vendredi 07 janvier 2011 à 14:47 +0200, Maxim Levitsky a écrit :
> > On Mon, 2010-11-29 at 04:09 +0200, Maxim Levitsky wrote:
> > > IPv4 over firewire needs to be able to remove ARP entries
> > > from the ARP cache that belong to nodes that are removed, because
> > > IPv4 over firewire uses ARP packets for private information
> > > about nodes.
> > >
> > > This information becomes invalid as soon as node drops
> > > off the bus and when it reconnects, its only possible
> > > to start takling to is after it responded to an ARP packet.
> > > But ARP cache prevents such packets from being sent.
> > >
> > > CC: netdev@vger.kernel.org
> > > CC: "David S. Miller" <davem@davemloft.net>
> > > CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
> > > CC: James Morris <jmorris@namei.org>
> > > CC: Patrick McHardy <kaber@trash.net>
> >
> > Anybody?
> >
> > Best regards,
> > Maxim Levitsky
> >
> > >
> > >
> > > Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
> > > ---
> > > include/net/arp.h | 1 +
> > > net/ipv4/arp.c | 29 ++++++++++++++++++-----------
> > > 2 files changed, 19 insertions(+), 11 deletions(-)
> > >
> > > diff --git a/include/net/arp.h b/include/net/arp.h
> > > index f4cf6ce..91f0568 100644
> > > --- a/include/net/arp.h
> > > +++ b/include/net/arp.h
> > > @@ -25,5 +25,6 @@ extern struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
> > > const unsigned char *src_hw,
> > > const unsigned char *target_hw);
> > > extern void arp_xmit(struct sk_buff *skb);
> > > +int arp_invalidate(struct net_device *dev, __be32 ip);
> > >
> > > #endif /* _ARP_H */
> > > diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
> > > index d8e540c..35b1272 100644
> > > --- a/net/ipv4/arp.c
> > > +++ b/net/ipv4/arp.c
> > > @@ -1142,6 +1142,23 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev)
> > > return err;
> > > }
> > >
> > > +int arp_invalidate(struct net_device *dev, __be32 ip)
> > > +{
> > > + int err = -ENXIO;
> > > + struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
> > > +
> > > + if (neigh) {
> > > + if (neigh->nud_state & ~NUD_NOARP)
> > > + err = neigh_update(neigh, NULL, NUD_FAILED,
> > > + NEIGH_UPDATE_F_OVERRIDE|
> > > + NEIGH_UPDATE_F_ADMIN);
> > > + neigh_release(neigh);
> > > + }
> > > +
> > > + return err;
> > > +}
> > > +EXPORT_SYMBOL(arp_invalidate);
> > > +
> > > static int arp_req_delete_public(struct net *net, struct arpreq *r,
> > > struct net_device *dev)
> > > {
> > > @@ -1162,7 +1179,6 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
> > > {
> > > int err;
> > > __be32 ip;
> > > - struct neighbour *neigh;
> > >
> > > if (r->arp_flags & ATF_PUBL)
> > > return arp_req_delete_public(net, r, dev);
> > > @@ -1180,16 +1196,7 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
> > > if (!dev)
> > > return -EINVAL;
> > > }
> > > - err = -ENXIO;
> > > - neigh = neigh_lookup(&arp_tbl, &ip, dev);
> > > - if (neigh) {
> > > - if (neigh->nud_state & ~NUD_NOARP)
> > > - err = neigh_update(neigh, NULL, NUD_FAILED,
> > > - NEIGH_UPDATE_F_OVERRIDE|
> > > - NEIGH_UPDATE_F_ADMIN);
> > > - neigh_release(neigh);
> > > - }
> > > - return err;
> > > + return arp_invalidate(dev, ip);
> > > }
> > >
> > > /*
> >
>
> Hi Maxim
>
> You were supposed to respin your patch after my commit :
>
> (941666c2e3e0f9f6a1 net: RCU conversion of dev_getbyhwaddr() and
> arp_ioctl())
>
> Thanks
Hi,
After looking at the code (and honestly its hard to work with it as it
has no documentation at all), I think I don't need any changes in my
patch.
Here is the latest version for I use with the above commit applied (it
is in mainline now).
---
commit 7da91d68d78b6a44ba6337be3b29b22ba2909b9e
Author: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Sat Nov 27 00:50:45 2010 +0200
NET: IPV4: ARP: allow to invalidate specific ARP entries
IPv4 over firewire needs to be able to remove ARP entries
from the ARP cache that belong to nodes that are removed, because
IPv4 over firewire uses ARP packets for private information
about nodes.
This information becomes invalid as soon as node drops
off the bus and when it reconnects, its only possible
to start takling to is after it responded to an ARP packet.
But ARP cache prevents such packets from being sent.
CC: netdev@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
diff --git a/include/net/arp.h b/include/net/arp.h
index f4cf6ce..91f0568 100644
--- a/include/net/arp.h
+++ b/include/net/arp.h
@@ -25,5 +25,6 @@ extern struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
const unsigned char *src_hw,
const unsigned char *target_hw);
extern void arp_xmit(struct sk_buff *skb);
+int arp_invalidate(struct net_device *dev, __be32 ip);
#endif /* _ARP_H */
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index a2fc7b9..e941c75 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1143,6 +1143,23 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev)
return err;
}
+int arp_invalidate(struct net_device *dev, __be32 ip)
+{
+ int err = -ENXIO;
+ struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
+
+ if (neigh) {
+ if (neigh->nud_state & ~NUD_NOARP)
+ err = neigh_update(neigh, NULL, NUD_FAILED,
+ NEIGH_UPDATE_F_OVERRIDE|
+ NEIGH_UPDATE_F_ADMIN);
+ neigh_release(neigh);
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(arp_invalidate);
+
static int arp_req_delete_public(struct net *net, struct arpreq *r,
struct net_device *dev)
{
@@ -1163,7 +1180,6 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
{
int err;
__be32 ip;
- struct neighbour *neigh;
if (r->arp_flags & ATF_PUBL)
return arp_req_delete_public(net, r, dev);
@@ -1181,16 +1197,7 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
if (!dev)
return -EINVAL;
}
- err = -ENXIO;
- neigh = neigh_lookup(&arp_tbl, &ip, dev);
- if (neigh) {
- if (neigh->nud_state & ~NUD_NOARP)
- err = neigh_update(neigh, NULL, NUD_FAILED,
- NEIGH_UPDATE_F_OVERRIDE|
- NEIGH_UPDATE_F_ADMIN);
- neigh_release(neigh);
- }
- return err;
+ return arp_invalidate(dev, ip);
}
/*
^ permalink raw reply related
* [PATCH v1] TCPCT socket API update to draft -02
From: William Allen Simpson @ 2011-01-08 22:07 UTC (permalink / raw)
To: Linux Kernel Network Developers
In-Reply-To: <4D28D8EF.5010008@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 581 bytes --]
Use most recently specified symbols of RFC-to-be-6013.
Permit setting either cookie or s_data or both (sequentially).
Allows different s_data limits for SYN and SYN_ACK.
Split the data value from socket option header, saving more than
1K of stack space in the handler by copying long data values
directly from user space into the kref block.
Signed-off-by: William.Allen.Simpson@gmail.com
---
include/linux/tcp.h | 35 ++++++++++++++++-----
net/ipv4/tcp.c | 86 ++++++++++++++++++++++++++++++++++++--------------
2 files changed, 89 insertions(+), 32 deletions(-)
[-- Attachment #2: TCPCT+API-02v1+2.6.37.patch --]
[-- Type: text/plain, Size: 7093 bytes --]
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index e64f4c6..ddfdd26 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -184,23 +184,42 @@ struct tcp_md5sig {
#define TCP_COOKIE_MAX 16 /* 128-bits */
#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX)
+/* Implementation-specific data limits */
+#define TCP_SYN_DATA_LIMIT (TCP_MSS_DEFAULT - sizeof(struct tcphdr))
+#define TCP_SYN_ACK_DATA_LIMIT (TCP_MSS_DESIRED)
+
/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies,
+#define TCPCT_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */
+#define TCPCT_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies,
* supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN (1 << 2) /* Was data received? */
-#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
+#define TCPCT_IN_DATA (1 << 2) /* Was data received? */
+#define TCPCT_OUT_DATA (1 << 3) /* Was data sent? */
+/* reserved for future use: bits 4 .. 6 */
+#define TCPCT_EXTEND (1 << 7)
+
+/* Extended Option flags for both getsockopt and setsockopt */
+#define TCPCT_EXTEND_SIZE (0x7) /* mask */
+#define TCPCT_EXTEND_TS32 (0x1) /* default */
+#define TCPCT_EXTEND_TS64 (0x2)
+#define TCPCT_EXTEND_TS128 (0x4)
+
+/* TCP_COOKIE_TRANSACTIONS socket option header */
struct tcp_cookie_transactions {
__u16 tcpct_flags; /* see above */
- __u8 __tcpct_pad1; /* zero */
+ __u8 tcpct_extended;
__u8 tcpct_cookie_desired; /* bytes */
__u16 tcpct_s_data_desired; /* bytes of variable data */
__u16 tcpct_used; /* bytes in value */
- __u8 tcpct_value[TCP_MSS_DEFAULT];
+};
+
+struct tcpct_full {
+ struct tcp_cookie_transactions soh;
+ __u8 tcpct_value[TCP_COOKIE_PAIR_SIZE];
+};
+
+struct tcpct_half {
+ struct tcp_cookie_transactions soh;
+ __u8 tcpct_value[TCP_COOKIE_MAX];
};
#ifdef __KERNEL__
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6c11eec..28dd6a1 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2143,16 +2143,13 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
case TCP_COOKIE_TRANSACTIONS: {
struct tcp_cookie_transactions ctd;
struct tcp_cookie_values *cvp = NULL;
+ int s_data_used = 0;
if (sizeof(ctd) > optlen)
return -EINVAL;
if (copy_from_user(&ctd, optval, sizeof(ctd)))
return -EFAULT;
- if (ctd.tcpct_used > sizeof(ctd.tcpct_value) ||
- ctd.tcpct_s_data_desired > TCP_MSS_DESIRED)
- return -EINVAL;
-
if (ctd.tcpct_cookie_desired == 0) {
/* default to global value */
} else if ((0x1 & ctd.tcpct_cookie_desired) ||
@@ -2161,7 +2158,33 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
return -EINVAL;
}
- if (TCP_COOKIE_OUT_NEVER & ctd.tcpct_flags) {
+ if (ctd.tcpct_used > 0) {
+ if (ctd.tcpct_used + sizeof(ctd) > optlen)
+ return -EINVAL;
+ if (TCPCT_OUT_DATA & ctd.tcpct_flags) {
+ if (ctd.tcpct_used > TCP_SYN_ACK_DATA_LIMIT)
+ return -EINVAL;
+ if (ctd.tcpct_s_data_desired > 0)
+ return -EINVAL;
+ s_data_used = ctd.tcpct_used;
+ } else {
+ if (ctd.tcpct_used > TCP_COOKIE_PAIR_SIZE)
+ return -EINVAL;
+ if (ctd.tcpct_used !=
+ ctd.tcpct_cookie_desired &&
+ ctd.tcpct_used !=
+ ctd.tcpct_cookie_desired * 2)
+ return -EINVAL;
+ if (ctd.tcpct_s_data_desired >
+ TCP_SYN_DATA_LIMIT)
+ return -EINVAL;
+ }
+ } else if (TCPCT_OUT_DATA & ctd.tcpct_flags) {
+ /* unexpected flag without s_data */
+ return -EINVAL;
+ }
+
+ if (TCPCT_OUT_NEVER & ctd.tcpct_flags) {
/* Supercedes all other values */
lock_sock(sk);
if (tp->cookie_values != NULL) {
@@ -2177,12 +2200,12 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
/* Allocate ancillary memory before locking.
*/
- if (ctd.tcpct_used > 0 ||
+ if (s_data_used > 0 ||
(tp->cookie_values == NULL &&
(sysctl_tcp_cookie_size > 0 ||
ctd.tcpct_cookie_desired > 0 ||
ctd.tcpct_s_data_desired > 0))) {
- cvp = kzalloc(sizeof(*cvp) + ctd.tcpct_used,
+ cvp = kzalloc(sizeof(*cvp) + s_data_used,
GFP_KERNEL);
if (cvp == NULL)
return -ENOMEM;
@@ -2191,7 +2214,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
}
lock_sock(sk);
tp->rx_opt.cookie_in_always =
- (TCP_COOKIE_IN_ALWAYS & ctd.tcpct_flags);
+ (TCPCT_IN_ALWAYS & ctd.tcpct_flags);
tp->rx_opt.cookie_out_never = 0; /* false */
if (tp->cookie_values != NULL) {
@@ -2210,11 +2233,26 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
if (cvp != NULL) {
cvp->cookie_desired = ctd.tcpct_cookie_desired;
- if (ctd.tcpct_used > 0) {
- memcpy(cvp->s_data_payload, ctd.tcpct_value,
- ctd.tcpct_used);
- cvp->s_data_desired = ctd.tcpct_used;
+ if (s_data_used > 0) {
+ if (copy_from_user(cvp->s_data_payload,
+ optval + sizeof(ctd),
+ s_data_used)) {
+ kref_put(&cvp->kref,
+ tcp_cookie_values_release);
+ return -EFAULT;
+ }
+ cvp->s_data_desired = s_data_used;
cvp->s_data_constant = 1; /* true */
+ } else if (ctd.tcpct_used > 0) {
+ if (copy_from_user(cvp->cookie_pair,
+ optval + sizeof(ctd),
+ ctd.tcpct_used)) {
+ kref_put(&cvp->kref,
+ tcp_cookie_values_release);
+ return -EFAULT;
+ }
+ cvp->s_data_desired = ctd.tcpct_s_data_desired;
+ cvp->s_data_constant = 0; /* false */
} else {
/* No constant payload data. */
cvp->s_data_desired = ctd.tcpct_s_data_desired;
@@ -2574,7 +2612,7 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
return 0;
case TCP_COOKIE_TRANSACTIONS: {
- struct tcp_cookie_transactions ctd;
+ struct tcpct_full ctd;
struct tcp_cookie_values *cvp = tp->cookie_values;
if (get_user(len, optlen))
@@ -2583,23 +2621,23 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
return -EINVAL;
memset(&ctd, 0, sizeof(ctd));
- ctd.tcpct_flags = (tp->rx_opt.cookie_in_always ?
- TCP_COOKIE_IN_ALWAYS : 0)
- | (tp->rx_opt.cookie_out_never ?
- TCP_COOKIE_OUT_NEVER : 0);
+ ctd.soh.tcpct_flags = (tp->rx_opt.cookie_in_always ?
+ TCPCT_IN_ALWAYS : 0)
+ | (tp->rx_opt.cookie_out_never ?
+ TCPCT_OUT_NEVER : 0);
if (cvp != NULL) {
- ctd.tcpct_flags |= (cvp->s_data_in ?
- TCP_S_DATA_IN : 0)
- | (cvp->s_data_out ?
- TCP_S_DATA_OUT : 0);
+ ctd.soh.tcpct_flags |= (cvp->s_data_in ?
+ TCPCT_IN_DATA : 0)
+ | (cvp->s_data_out ?
+ TCPCT_OUT_DATA : 0);
- ctd.tcpct_cookie_desired = cvp->cookie_desired;
- ctd.tcpct_s_data_desired = cvp->s_data_desired;
+ ctd.soh.tcpct_cookie_desired = cvp->cookie_desired;
+ ctd.soh.tcpct_s_data_desired = cvp->s_data_desired;
memcpy(&ctd.tcpct_value[0], &cvp->cookie_pair[0],
cvp->cookie_pair_size);
- ctd.tcpct_used = cvp->cookie_pair_size;
+ ctd.soh.tcpct_used = cvp->cookie_pair_size;
}
if (put_user(sizeof(ctd), optlen))
--
1.7.1
^ permalink raw reply related
* TCPCT API update for 2.6.37
From: William Allen Simpson @ 2011-01-08 21:36 UTC (permalink / raw)
To: Linux Kernel Network Developers
With the recent flurry of messages related to TCPCT, I devoted a nice
snowy Saturday afternoon to updating the socket option code. Linux is
rather fair behind on TCPCT implementation, so this will help with
future software compatibility.
I'm not on this list, so anybody with comments should CC me. Thanks.
^ permalink raw reply
* Re: [PATCH] iproute2: ip: add wilcard support for device matching
From: Philip Prindeville @ 2011-01-08 21:10 UTC (permalink / raw)
To: hadi
Cc: Vlad Dogaru, Octavian Purdila, Eric Dumazet, Stephen Hemminger,
netdev, Lucian Adrian Grijincu
In-Reply-To: <1292937262.6535.15.camel@mojatatu>
On 12/21/10 5:14 AM, jamal wrote:
> On Mon, 2010-12-20 at 11:23 -0800, Vlad Dogaru wrote:
>
>> I'll try to implement this approach in the next few days.
> Excellent ;-> Remember, this is general purpose tag, sort
> like socket/route/skb->mark. It is upto the administrator to
> define its use via policy.
>
> cheers,
> jamal
Did that end up going anywhere?
There are a lot of cases where matching on "ppp*" would be handy.
^ permalink raw reply
* Re: Seeing transmit timeouts on 8139cp
From: Philip Prindeville @ 2011-01-08 21:09 UTC (permalink / raw)
To: Francois Romieu; +Cc: Linux Netdev List
In-Reply-To: <4C99A289.2030109@redfish-solutions.com>
On 9/21/10 11:30 PM, Philip Prindeville wrote:
> On 9/17/10 1:00 PM, Francois Romieu wrote:
>> Philip Prindeville<philipp_subx@redfish-solutions.com> :
>> [...]
>>> Does this look familiar to anyone?
>> 349124a00754129a5f1e43efa84733e364bf3749 ?
>>
>> It would be a bit too easy.
>>
> Thanks. I'll give it a try now.
No, that's not the problem. Still seeing traces, even after applying that patch.
This is in 2.6.27.57:
Jan 8 00:11:25 pdx user.warn kernel: ------------[ cut here ]------------
Jan 8 00:11:25 pdx user.warn kernel: WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0xf1/0x176()
Jan 8 00:11:25 pdx user.info kernel: NETDEV WATCHDOG: eth1 (8139cp): transmit timed out
Jan 8 00:11:25 pdx user.warn kernel: Modules linked in: pppoatm pppox ppp_generic slhc bridge stp llc solos_pci atm dummy ath5k mac80211 ath cfg80211 rfkill_backport compat dahdi sha512_generic sha256_generic deflate zlib_deflate arc4 ecb sha1_generic blowfish des
Jan 8 00:11:25 pdx user.warn kernel: Pid: 0, comm: swapper Tainted: P 2.6.27.57-astlinux #1
Jan 8 00:11:25 pdx user.warn kernel: [<c0115462>] warn_slowpath+0x61/0x84
Jan 8 00:11:25 pdx user.warn kernel: [<c026649b>] nf_hook_slow+0x44/0xb1
Jan 8 00:11:25 pdx user.warn kernel: [<e018d968>] br_nf_pre_routing_finish+0x0/0x257 [bridge]
Jan 8 00:11:25 pdx user.warn kernel: [<e018e5a3>] br_nf_pre_routing+0x532/0x54b [bridge]
Jan 8 00:11:25 pdx user.warn kernel: [<c01065e8>] read_tsc+0x6/0x22
Jan 8 00:11:25 pdx user.warn kernel: [<c01289a6>] getnstimeofday+0x4a/0xc7
Jan 8 00:11:25 pdx user.warn kernel: [<c01267ca>] ktime_get_ts+0x1d/0x3f
Jan 8 00:11:25 pdx user.warn kernel: [<c0126056>] hrtimer_forward+0xe2/0xfe
Jan 8 00:11:25 pdx user.warn kernel: [<c025e0b3>] dev_watchdog+0x0/0x176
Jan 8 00:11:25 pdx user.warn kernel: [<c01cfb57>] strlcpy+0x15/0x62
Jan 8 00:11:25 pdx user.warn kernel: [<c025e1a4>] dev_watchdog+0xf1/0x176
Jan 8 00:11:25 pdx user.warn kernel: [<e00e7f3c>] coretimer_func+0xb1/0x133 [dahdi]
Jan 8 00:11:25 pdx user.warn kernel: [<c011c05a>] run_timer_softirq+0x116/0x17a
Jan 8 00:11:25 pdx user.warn kernel: [<c0118ce4>] __do_softirq+0x35/0x75
Jan 8 00:11:25 pdx user.warn kernel: [<c0118d46>] do_softirq+0x22/0x26
Jan 8 00:11:25 pdx user.warn kernel: [<c0118f20>] irq_exit+0x25/0x30
Jan 8 00:11:25 pdx user.warn kernel: [<c010477c>] do_IRQ+0x4d/0x5d
Jan 8 00:11:25 pdx user.warn kernel: [<c010394b>] common_interrupt+0x23/0x28
Jan 8 00:11:25 pdx user.warn kernel: [<c0106f3d>] default_idle+0x25/0x38
Jan 8 00:11:25 pdx user.warn kernel: [<c010254b>] cpu_idle+0x37/0x5f
Jan 8 00:11:25 pdx user.warn kernel: =======================
Jan 8 00:11:25 pdx user.warn kernel: ---[ end trace 4eb2e0ef5bc6569d ]---
Jan 8 00:11:25 pdx user.warn kernel: eth1: Transmit timeout, status c 2b 0 80ff
Any other ideas?
Thanks.
^ permalink raw reply
* Re: iproute2 caching and batch mode
From: denys @ 2011-01-08 20:36 UTC (permalink / raw)
To: denys; +Cc: Stephen Hemminger, netdev
In-Reply-To: <0befc7c09f04936c1244eaa5a1d2620c@localhost>
On Sat, 08 Jan 2011 22:09:39 +0200, <denys@visp.net.lb> wrote:
> Hi,
>
> noticed some issue a while ago, and because of recent patches decided to
> post my thoughts:
>
> This issue can happen if ip or tc running in some kind of "daemon" batch
> mode, or processing large batch file on computer where interfaces can
> reappear with same name but different index (pppoe NAS for example).
>
> It is easy to reproduce the problem:
>
> centaur iproute2-2.6.37 # ip/ip -force -batch -
> tunnel add test0 mode ipip remote 1.1.1.2 local 1.1.1.1
> link show dev test0
> 201: test0: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN
> link/ipip 1.1.1.1 peer 1.1.1.2
> tunnel del test0
> Unsupported family:17
>
> Or:
>
> centaur iproute2-2.6.37 # ip/ip -force -batch -
> tunnel del test0
> tunnel add test0 mode ipip remote 1.1.1.2 local 1.1.1.1
> link show dev test0
> 202: test0: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN
> link/ipip 1.1.1.1 peer 1.1.1.2
> (another console, delete and create again test0)
> link show dev test0
> (nothing will appear)
Sorry, just got mail sent before i finish it.
Is it appropriate to implement some kind of "flush" command, to flush
internal cache?
I can try to do that, if this way is ok.
Sure maybe best way to monitor interface updates over netlink, in batch
mode, and update cache accordingly.
^ permalink raw reply
* iproute2 caching and batch mode
From: denys @ 2011-01-08 20:09 UTC (permalink / raw)
To: Stephen Hemminger, netdev
Hi,
noticed some issue a while ago, and because of recent patches decided to
post my thoughts:
This issue can happen if ip or tc running in some kind of "daemon" batch
mode, or processing large batch file on computer where interfaces can
reappear with same name but different index (pppoe NAS for example).
It is easy to reproduce the problem:
centaur iproute2-2.6.37 # ip/ip -force -batch -
tunnel add test0 mode ipip remote 1.1.1.2 local 1.1.1.1
link show dev test0
201: test0: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN
link/ipip 1.1.1.1 peer 1.1.1.2
tunnel del test0
Unsupported family:17
Or:
centaur iproute2-2.6.37 # ip/ip -force -batch -
tunnel del test0
tunnel add test0 mode ipip remote 1.1.1.2 local 1.1.1.1
link show dev test0
202: test0: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN
link/ipip 1.1.1.1 peer 1.1.1.2
(another console, delete and create again test0)
link show dev test0
(nothing will appear)
^ permalink raw reply
* Re: 2.6.37 vlans on bnx2 not functional, panic with tcpdump
From: Jarek Poplawski @ 2011-01-08 18:41 UTC (permalink / raw)
To: Iain Paton
Cc: Michael Chan, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
In-Reply-To: <4D2754F9.8050707@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 276 bytes --]
Iain Paton wrote:
...
> So you can consider any bnx2 cause for this closed. I'll get back to the
> list if I can come up with any more useful info.
Hi Iain,
If it's not a problem, please try if the attached debugging patch
(not tested) can change anything.
Thanks,
Jarek P.
[-- Attachment #2: dev.c.deliver_skb.1.diff --]
[-- Type: text/plain, Size: 1286 bytes --]
diff --git a/net/core/dev.c b/net/core/dev.c
index 0dd54a6..9244373 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2720,6 +2720,17 @@ static inline int deliver_skb(struct sk_buff *skb,
return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
}
+static inline int deliver_skb_clone(struct sk_buff *skb,
+ struct packet_type *pt_prev,
+ struct net_device *orig_dev)
+{
+ struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+
+ if (!nskb)
+ return 0;
+ return pt_prev->func(nskb, nskb->dev, pt_prev, orig_dev);
+}
+
#if (defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)) && \
(defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE))
/* This hook is defined here for ATM LANE */
@@ -2950,7 +2961,7 @@ static int __netif_receive_skb(struct sk_buff *skb)
if (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
ptype->dev == orig_dev) {
if (pt_prev)
- ret = deliver_skb(skb, pt_prev, orig_dev);
+ ret = deliver_skb_clone(skb, pt_prev, orig_dev);
pt_prev = ptype;
}
}
@@ -2976,7 +2987,7 @@ ncls:
if (vlan_tx_tag_present(skb)) {
if (pt_prev) {
- ret = deliver_skb(skb, pt_prev, orig_dev);
+ ret = deliver_skb_clone(skb, pt_prev, orig_dev);
pt_prev = NULL;
}
if (vlan_hwaccel_do_receive(&skb)) {
^ permalink raw reply related
* Re: [PATCH V8 02/13] ntp: add ADJ_SETOFFSET mode bit
From: Richard Cochran @ 2011-01-08 17:50 UTC (permalink / raw)
To: Kuwahara,T.
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-api-u79uwXL29TY76Z2rM5mHXA, netdev-u79uwXL29TY76Z2rM5mHXA,
Alan Cox, Arnd Bergmann, Christoph Lameter, David Miller,
John Stultz, Krzysztof Halasa, Peter Zijlstra, Rodolfo Giometti,
Thomas Gleixner
In-Reply-To: <AANLkTini2WdT-1v4k9V3JOZYDkA59P+SyscTe8-fK2Wk-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Sun, Jan 02, 2011 at 05:38:19AM +0900, Kuwahara,T. wrote:
> As you know, it conflicts with MOD_PPSMAX. And also, it is logically
> the same as ADJ_OFFSET, unless the kernel PLL is enabled explicitly.
I choose another bit, for the next version of the patch series.
>
> So here's my simple solution:
>
I have read the API documentation in the nanokernel source archive. It
explains the (very complex looking) timex structure quite clearly and
nicely. Now I am more convinced than ever that adding a new mode bit
is the best way to go, as opposed to ADJ_OFFSET/!STA_PLL, because:
1. The mode bits update kernel variables. That is what we want.
2. Clearing STA_PLL means disable adjustments.
3. The range of the timex.offset is way too small.
I expand on each point, below. BTW, the API document is also available
for online reading here:
http://www.slac.stanford.edu/comp/unix/package/rtems/src/ssrlApps/ntpNanoclock/api.htm
1. Looking at the API, the documentation for the bits of the 'modes'
field states:
These bits control which field of the timex structure are used
to update the corresponding kernel variable. The bits may be
set in any combination. See the description below for which
bits control which variable.
With the ADJ_SETOFFSET mode, we are telling the kernel to update
the instantaneous value of the 'current time' variable. That usage
agrees with the sematics of the other mode bits.
2. The documentation for STA_PLL states:
Master enable switch for the PLL/FLL loop. The algorithm is
responsive to time and/or frequency updates if set; otherwise,
no change in the current time or frequency will be made other
than to complete a pending phase adjustment. This bit does not
affect the PPS loop.
So when we clear this bit, the kernel promises that it will make
"no change in the current time." The proposed ADJ_OFFSET/!STA_PLL
solution would break this pattern.
3. The timex.offset field is of type "long" and represents either
nanoseconds or microseconds. On 32 bit architectures, the maximum
possible adjustment would be
2^31 * 10^-6 = 2147.5 seconds
which is less than one hour. For the first adjustment of a clock,
we want to be able to jump the clock arbitrarily. Not every
computer has an RTC, and so some boot up believing that it is still
the year 1970.
Richard
^ permalink raw reply
* Re: [PATCH v4 net-next-2.6] netfilter: x_tables: dont block BH while reading counters
From: Eric Dumazet @ 2011-01-08 16:45 UTC (permalink / raw)
To: Patrick McHardy, David Miller
Cc: Jesper Dangaard Brouer, netfilter-devel, netdev,
Stephen Hemminger
In-Reply-To: <1292646579.7894.42.camel@edumazet-laptop>
David,
I am resending this patch, sent 3 weeks ago, Patrick gave no answer.
I believe it should be included in linux-2.6.38 and stable kernels.
Some people found they had to change NIC RX ring sizes in order not
missing frames (from 1024 to 2048), while root cause of the problem was
this.
Quoting Jesper : "I can now hit the system with a pktgen at 128 bytes,
and see no drops/overruns while running iptables. (This packet load at
128bytes is 822 kpps and 840Mbit/s) (iptables ruleset is the big chains:
20929 rules: 81239)."
Thanks
[PATCH v4] netfilter: x_tables: dont block BH while reading counters
Using "iptables -L" with a lot of rules have a too big BH latency.
Jesper mentioned ~6 ms and worried of frame drops.
Switch to a per_cpu seqlock scheme, so that taking a snapshot of
counters doesnt need to block BH (for this cpu, but also other cpus).
This adds two increments on seqlock sequence per ipt_do_table() call,
its a reasonable cost for allowing "iptables -L" not block BH
processing.
Reported-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jesper Dangaard Brouer <hawk@comx.dk>
---
include/linux/netfilter/x_tables.h | 10 +++---
net/ipv4/netfilter/arp_tables.c | 45 ++++++++-------------------
net/ipv4/netfilter/ip_tables.c | 45 ++++++++-------------------
net/ipv6/netfilter/ip6_tables.c | 45 ++++++++-------------------
net/netfilter/x_tables.c | 3 +
5 files changed, 49 insertions(+), 99 deletions(-)
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 742bec0..6712e71 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -472,7 +472,7 @@ extern void xt_free_table_info(struct xt_table_info *info);
* necessary for reading the counters.
*/
struct xt_info_lock {
- spinlock_t lock;
+ seqlock_t lock;
unsigned char readers;
};
DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
@@ -497,7 +497,7 @@ static inline void xt_info_rdlock_bh(void)
local_bh_disable();
lock = &__get_cpu_var(xt_info_locks);
if (likely(!lock->readers++))
- spin_lock(&lock->lock);
+ write_seqlock(&lock->lock);
}
static inline void xt_info_rdunlock_bh(void)
@@ -505,7 +505,7 @@ static inline void xt_info_rdunlock_bh(void)
struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
if (likely(!--lock->readers))
- spin_unlock(&lock->lock);
+ write_sequnlock(&lock->lock);
local_bh_enable();
}
@@ -516,12 +516,12 @@ static inline void xt_info_rdunlock_bh(void)
*/
static inline void xt_info_wrlock(unsigned int cpu)
{
- spin_lock(&per_cpu(xt_info_locks, cpu).lock);
+ write_seqlock(&per_cpu(xt_info_locks, cpu).lock);
}
static inline void xt_info_wrunlock(unsigned int cpu)
{
- spin_unlock(&per_cpu(xt_info_locks, cpu).lock);
+ write_sequnlock(&per_cpu(xt_info_locks, cpu).lock);
}
/*
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 3fac340..e855fff 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -710,42 +710,25 @@ static void get_counters(const struct xt_table_info *t,
struct arpt_entry *iter;
unsigned int cpu;
unsigned int i;
- unsigned int curcpu = get_cpu();
-
- /* Instead of clearing (by a previous call to memset())
- * the counters and using adds, we set the counters
- * with data used by 'current' CPU
- *
- * Bottom half has to be disabled to prevent deadlock
- * if new softirq were to run and call ipt_do_table
- */
- local_bh_disable();
- i = 0;
- xt_entry_foreach(iter, t->entries[curcpu], t->size) {
- SET_COUNTER(counters[i], iter->counters.bcnt,
- iter->counters.pcnt);
- ++i;
- }
- local_bh_enable();
- /* Processing counters from other cpus, we can let bottom half enabled,
- * (preemption is disabled)
- */
for_each_possible_cpu(cpu) {
- if (cpu == curcpu)
- continue;
+ seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+
i = 0;
- local_bh_disable();
- xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
- ADD_COUNTER(counters[i], iter->counters.bcnt,
- iter->counters.pcnt);
+ u64 bcnt, pcnt;
+ unsigned int start;
+
+ do {
+ start = read_seqbegin(lock);
+ bcnt = iter->counters.bcnt;
+ pcnt = iter->counters.pcnt;
+ } while (read_seqretry(lock, start));
+
+ ADD_COUNTER(counters[i], bcnt, pcnt);
++i;
}
- xt_info_wrunlock(cpu);
- local_bh_enable();
}
- put_cpu();
}
static struct xt_counters *alloc_counters(const struct xt_table *table)
@@ -759,7 +742,7 @@ static struct xt_counters *alloc_counters(const struct xt_table *table)
* about).
*/
countersize = sizeof(struct xt_counters) * private->number;
- counters = vmalloc(countersize);
+ counters = vzalloc(countersize);
if (counters == NULL)
return ERR_PTR(-ENOMEM);
@@ -1007,7 +990,7 @@ static int __do_replace(struct net *net, const char *name,
struct arpt_entry *iter;
ret = 0;
- counters = vmalloc(num_counters * sizeof(struct xt_counters));
+ counters = vzalloc(num_counters * sizeof(struct xt_counters));
if (!counters) {
ret = -ENOMEM;
goto out;
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index a846d63..652efea 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -884,42 +884,25 @@ get_counters(const struct xt_table_info *t,
struct ipt_entry *iter;
unsigned int cpu;
unsigned int i;
- unsigned int curcpu = get_cpu();
-
- /* Instead of clearing (by a previous call to memset())
- * the counters and using adds, we set the counters
- * with data used by 'current' CPU.
- *
- * Bottom half has to be disabled to prevent deadlock
- * if new softirq were to run and call ipt_do_table
- */
- local_bh_disable();
- i = 0;
- xt_entry_foreach(iter, t->entries[curcpu], t->size) {
- SET_COUNTER(counters[i], iter->counters.bcnt,
- iter->counters.pcnt);
- ++i;
- }
- local_bh_enable();
- /* Processing counters from other cpus, we can let bottom half enabled,
- * (preemption is disabled)
- */
for_each_possible_cpu(cpu) {
- if (cpu == curcpu)
- continue;
+ seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+
i = 0;
- local_bh_disable();
- xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
- ADD_COUNTER(counters[i], iter->counters.bcnt,
- iter->counters.pcnt);
+ u64 bcnt, pcnt;
+ unsigned int start;
+
+ do {
+ start = read_seqbegin(lock);
+ bcnt = iter->counters.bcnt;
+ pcnt = iter->counters.pcnt;
+ } while (read_seqretry(lock, start));
+
+ ADD_COUNTER(counters[i], bcnt, pcnt);
++i; /* macro does multi eval of i */
}
- xt_info_wrunlock(cpu);
- local_bh_enable();
}
- put_cpu();
}
static struct xt_counters *alloc_counters(const struct xt_table *table)
@@ -932,7 +915,7 @@ static struct xt_counters *alloc_counters(const struct xt_table *table)
(other than comefrom, which userspace doesn't care
about). */
countersize = sizeof(struct xt_counters) * private->number;
- counters = vmalloc(countersize);
+ counters = vzalloc(countersize);
if (counters == NULL)
return ERR_PTR(-ENOMEM);
@@ -1203,7 +1186,7 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks,
struct ipt_entry *iter;
ret = 0;
- counters = vmalloc(num_counters * sizeof(struct xt_counters));
+ counters = vzalloc(num_counters * sizeof(struct xt_counters));
if (!counters) {
ret = -ENOMEM;
goto out;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 4555823..7d227c6 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -897,42 +897,25 @@ get_counters(const struct xt_table_info *t,
struct ip6t_entry *iter;
unsigned int cpu;
unsigned int i;
- unsigned int curcpu = get_cpu();
-
- /* Instead of clearing (by a previous call to memset())
- * the counters and using adds, we set the counters
- * with data used by 'current' CPU
- *
- * Bottom half has to be disabled to prevent deadlock
- * if new softirq were to run and call ipt_do_table
- */
- local_bh_disable();
- i = 0;
- xt_entry_foreach(iter, t->entries[curcpu], t->size) {
- SET_COUNTER(counters[i], iter->counters.bcnt,
- iter->counters.pcnt);
- ++i;
- }
- local_bh_enable();
- /* Processing counters from other cpus, we can let bottom half enabled,
- * (preemption is disabled)
- */
for_each_possible_cpu(cpu) {
- if (cpu == curcpu)
- continue;
+ seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+
i = 0;
- local_bh_disable();
- xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
- ADD_COUNTER(counters[i], iter->counters.bcnt,
- iter->counters.pcnt);
+ u64 bcnt, pcnt;
+ unsigned int start;
+
+ do {
+ start = read_seqbegin(lock);
+ bcnt = iter->counters.bcnt;
+ pcnt = iter->counters.pcnt;
+ } while (read_seqretry(lock, start));
+
+ ADD_COUNTER(counters[i], bcnt, pcnt);
++i;
}
- xt_info_wrunlock(cpu);
- local_bh_enable();
}
- put_cpu();
}
static struct xt_counters *alloc_counters(const struct xt_table *table)
@@ -945,7 +928,7 @@ static struct xt_counters *alloc_counters(const struct xt_table *table)
(other than comefrom, which userspace doesn't care
about). */
countersize = sizeof(struct xt_counters) * private->number;
- counters = vmalloc(countersize);
+ counters = vzalloc(countersize);
if (counters == NULL)
return ERR_PTR(-ENOMEM);
@@ -1216,7 +1199,7 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks,
struct ip6t_entry *iter;
ret = 0;
- counters = vmalloc(num_counters * sizeof(struct xt_counters));
+ counters = vzalloc(num_counters * sizeof(struct xt_counters));
if (!counters) {
ret = -ENOMEM;
goto out;
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 8046350..c942376 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1325,7 +1325,8 @@ static int __init xt_init(void)
for_each_possible_cpu(i) {
struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
- spin_lock_init(&lock->lock);
+
+ seqlock_init(&lock->lock);
lock->readers = 0;
}
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox