* [PATCH] bonding: convert to ndo_fix_features
From: Michał Mirosław @ 2011-05-06 17:56 UTC (permalink / raw)
To: netdev; +Cc: Jay Vosburgh, Andy Gospodarek
This should also fix updating of vlan_features and propagating changes to
VLAN devices on the bond.
Side effect: it allows user to force-disable some offloads on the bond
interface.
Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now.
BTW, What are the problems in creating VLAN devices on an empty bond
(as stated in one of bond_setup() comments)?
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
Note: This is only compile tested, yet.
drivers/net/bonding/bond_main.c | 133 +++++++++++++++------------------------
1 files changed, 50 insertions(+), 83 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9a5feaf..04a2205 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -344,32 +344,6 @@ out:
}
/**
- * bond_has_challenged_slaves
- * @bond: the bond we're working on
- *
- * Searches the slave list. Returns 1 if a vlan challenged slave
- * was found, 0 otherwise.
- *
- * Assumes bond->lock is held.
- */
-static int bond_has_challenged_slaves(struct bonding *bond)
-{
- struct slave *slave;
- int i;
-
- bond_for_each_slave(bond, slave, i) {
- if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
- pr_debug("found VLAN challenged slave - %s\n",
- slave->dev->name);
- return 1;
- }
- }
-
- pr_debug("no VLAN challenged slaves found\n");
- return 0;
-}
-
-/**
* bond_next_vlan - safely skip to the next item in the vlans list.
* @bond: the bond we're working on
* @curr: item we're advancing from
@@ -1406,52 +1380,61 @@ static int bond_sethwaddr(struct net_device *bond_dev,
return 0;
}
-#define BOND_VLAN_FEATURES \
- (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
- NETIF_F_HW_VLAN_FILTER)
-
-/*
- * Compute the common dev->feature set available to all slaves. Some
- * feature bits are managed elsewhere, so preserve those feature bits
- * on the master device.
- */
-static int bond_compute_features(struct bonding *bond)
+static u32 bond_fix_features(struct net_device *dev, u32 features)
{
struct slave *slave;
- struct net_device *bond_dev = bond->dev;
- u32 features = bond_dev->features;
- u32 vlan_features = 0;
- unsigned short max_hard_header_len = max((u16)ETH_HLEN,
- bond_dev->hard_header_len);
+ struct bonding *bond = netdev_priv(dev);
+ u32 mask;
int i;
- features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
- features |= NETIF_F_GSO_MASK | NETIF_F_NO_CSUM | NETIF_F_NOCACHE_COPY;
-
if (!bond->first_slave)
- goto done;
+ /* Disable adding VLANs to empty bond. But why? --mq */
+ return features | NETIF_F_VLAN_CHALLENGED;
+ mask = features;
features &= ~NETIF_F_ONE_FOR_ALL;
+ features |= NETIF_F_ALL_FOR_ALL;
- vlan_features = bond->first_slave->dev->vlan_features;
bond_for_each_slave(bond, slave, i) {
features = netdev_increment_features(features,
slave->dev->features,
- NETIF_F_ONE_FOR_ALL);
+ mask);
+ }
+
+ return features;
+}
+
+#define BOND_VLAN_FEATURES (NETIF_F_ALL_TX_OFFLOADS | \
+ NETIF_F_SOFT_FEATURES | \
+ NETIF_F_LRO)
+
+static void bond_compute_features(struct bonding *bond)
+{
+ struct slave *slave;
+ struct net_device *bond_dev = bond->dev;
+ u32 old_features, vlan_features = BOND_VLAN_FEATURES;
+ unsigned short max_hard_header_len = ETH_HLEN;
+ int i;
+
+ if (!bond->first_slave)
+ goto done;
+
+ bond_for_each_slave(bond, slave, i) {
vlan_features = netdev_increment_features(vlan_features,
- slave->dev->vlan_features,
- NETIF_F_ONE_FOR_ALL);
+ slave->dev->vlan_features, BOND_VLAN_FEATURES);
+
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
}
done:
- features |= (bond_dev->features & BOND_VLAN_FEATURES);
- bond_dev->features = netdev_fix_features(bond_dev, features);
- bond_dev->vlan_features = netdev_fix_features(bond_dev, vlan_features);
+ bond_dev->vlan_features = vlan_features;
bond_dev->hard_header_len = max_hard_header_len;
- return 0;
+ old_features = bond_dev->features;
+ netdev_update_features(bond_dev);
+ if (old_features == bond_dev->features)
+ netdev_features_change(bond_dev);
}
static void bond_setup_by_slave(struct net_device *bond_dev,
@@ -1544,7 +1527,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
struct netdev_hw_addr *ha;
struct sockaddr addr;
int link_reporting;
- int old_features = bond_dev->features;
int res = 0;
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
@@ -1577,16 +1559,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
bond_dev->name, slave_dev->name,
slave_dev->name, bond_dev->name);
- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
} else {
pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
- if (bond->slave_cnt == 0) {
- /* First slave, and it is not VLAN challenged,
- * so remove the block of adding VLANs over the bond.
- */
- bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
- }
}
/*
@@ -1958,7 +1933,7 @@ err_free:
kfree(new_slave);
err_undo_flags:
- bond_dev->features = old_features;
+ bond_compute_features(bond);
return res;
}
@@ -1979,6 +1954,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *oldcurrent;
struct sockaddr addr;
+ u32 old_features = bond_dev->features;
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
@@ -2084,19 +2060,16 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
*/
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
- if (!bond->vlgrp) {
- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
- } else {
+ if (bond->vlgrp) {
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
bond_dev->name, bond_dev->name);
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
bond_dev->name);
}
- } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
- !bond_has_challenged_slaves(bond)) {
+ } else if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
+ old_features & NETIF_F_VLAN_CHALLENGED) {
pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
bond_dev->name, slave_dev->name, bond_dev->name);
- bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
write_unlock_bh(&bond->lock);
@@ -2269,9 +2242,7 @@ static int bond_release_all(struct net_device *bond_dev)
*/
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
- if (!bond->vlgrp) {
- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
- } else {
+ if (bond->vlgrp) {
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
bond_dev->name, bond_dev->name);
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
@@ -4347,11 +4318,6 @@ static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
static const struct ethtool_ops bond_ethtool_ops = {
.get_drvinfo = bond_ethtool_get_drvinfo,
.get_link = ethtool_op_get_link,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .get_tso = ethtool_op_get_tso,
- .get_ufo = ethtool_op_get_ufo,
- .get_flags = ethtool_op_get_flags,
};
static const struct net_device_ops bond_netdev_ops = {
@@ -4377,6 +4343,7 @@ static const struct net_device_ops bond_netdev_ops = {
#endif
.ndo_add_slave = bond_enslave,
.ndo_del_slave = bond_release,
+ .ndo_fix_features = bond_fix_features,
};
static void bond_destructor(struct net_device *bond_dev)
@@ -4432,14 +4399,14 @@ static void bond_setup(struct net_device *bond_dev)
* when there are slaves that are not hw accel
* capable
*/
- bond_dev->features |= (NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER);
- /* By default, we enable GRO on bonding devices.
- * Actual support requires lowlevel drivers are GRO ready.
- */
- bond_dev->features |= NETIF_F_GRO;
+ bond_dev->hw_features = BOND_VLAN_FEATURES |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM);
+ bond_dev->features |= bond_dev->hw_features;
}
static void bond_work_cancel_all(struct bonding *bond)
--
1.7.2.5
^ permalink raw reply related
* [PATCH] net: Fix vlan_features propagation
From: Michał Mirosław @ 2011-05-06 17:56 UTC (permalink / raw)
To: netdev; +Cc: Patrick McHardy
Fix VLAN features propagation for devices which change vlan_features.
For this to work, driver needs to make sure netdev_features_changed()
gets called after the change (it is e.g. after ndo_set_features()).
Side effect is that a user might request features that will never
be enabled on a VLAN device.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
net/8021q/vlan_dev.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index d174c31..526159a 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -531,7 +531,7 @@ static int vlan_dev_init(struct net_device *dev)
(1<<__LINK_STATE_DORMANT))) |
(1<<__LINK_STATE_PRESENT);
- dev->hw_features = real_dev->vlan_features & NETIF_F_ALL_TX_OFFLOADS;
+ dev->hw_features = NETIF_F_ALL_TX_OFFLOADS;
dev->features |= real_dev->vlan_features | NETIF_F_LLTX;
dev->gso_max_size = real_dev->gso_max_size;
@@ -590,9 +590,11 @@ static u32 vlan_dev_fix_features(struct net_device *dev, u32 features)
{
struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
- features &= (real_dev->features | NETIF_F_LLTX);
+ features &= real_dev->features;
+ features &= real_dev->vlan_features;
if (dev_ethtool_get_rx_csum(real_dev))
features |= NETIF_F_RXCSUM;
+ features |= NETIF_F_LLTX;
return features;
}
--
1.7.2.5
^ permalink raw reply related
* Re: [PATCH v6 BONUS 4/3] ipv4: Store rtable entries directly in FIB
From: David Miller @ 2011-05-06 17:57 UTC (permalink / raw)
To: ja; +Cc: netdev, tgraf, jpirko, herbert, eric.dumazet
In-Reply-To: <alpine.LFD.2.00.1105060944230.1435@ja.ssi.bg>
From: Julian Anastasov <ja@ssi.bg>
Date: Fri, 6 May 2011 12:12:26 +0300 (EEST)
> Caching results of __mkroute_output in NH does
> not work well for RTN_MULTICAST because ip_check_mc_rcu
> wants to further restrict local delivery depending on
> the source address and protocol.
I understand that multicast needs special handling.
I'm concentrating on unicast/broadcast at the moment because
there is a predominantly clear path for making that work.
^ permalink raw reply
* Re: [PATCH] bonding: convert to ndo_fix_features
From: Jay Vosburgh @ 2011-05-06 18:18 UTC (permalink / raw)
To: Michał Mirosław; +Cc: netdev, Andy Gospodarek
In-Reply-To: <20110506175629.BC59D1389B@rere.qmqm.pl>
Michał Mirosław <mirq-linux@rere.qmqm.pl> wrote:
>This should also fix updating of vlan_features and propagating changes to
>VLAN devices on the bond.
>
>Side effect: it allows user to force-disable some offloads on the bond
>interface.
>
>Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now.
>
>BTW, What are the problems in creating VLAN devices on an empty bond
>(as stated in one of bond_setup() comments)?
If there are no slaves, then the bond does not have a MAC
address assigned (because it gets its initial MAC from the first slave).
It's therefore impossible to pass a MAC address up to the VLAN
interface.
So the limitation is that the bond must have at least one slave
before a VLAN may be configured above it.
-J
>Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
>---
>
>Note: This is only compile tested, yet.
>
> drivers/net/bonding/bond_main.c | 133 +++++++++++++++------------------------
> 1 files changed, 50 insertions(+), 83 deletions(-)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 9a5feaf..04a2205 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -344,32 +344,6 @@ out:
> }
>
> /**
>- * bond_has_challenged_slaves
>- * @bond: the bond we're working on
>- *
>- * Searches the slave list. Returns 1 if a vlan challenged slave
>- * was found, 0 otherwise.
>- *
>- * Assumes bond->lock is held.
>- */
>-static int bond_has_challenged_slaves(struct bonding *bond)
>-{
>- struct slave *slave;
>- int i;
>-
>- bond_for_each_slave(bond, slave, i) {
>- if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
>- pr_debug("found VLAN challenged slave - %s\n",
>- slave->dev->name);
>- return 1;
>- }
>- }
>-
>- pr_debug("no VLAN challenged slaves found\n");
>- return 0;
>-}
>-
>-/**
> * bond_next_vlan - safely skip to the next item in the vlans list.
> * @bond: the bond we're working on
> * @curr: item we're advancing from
>@@ -1406,52 +1380,61 @@ static int bond_sethwaddr(struct net_device *bond_dev,
> return 0;
> }
>
>-#define BOND_VLAN_FEATURES \
>- (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
>- NETIF_F_HW_VLAN_FILTER)
>-
>-/*
>- * Compute the common dev->feature set available to all slaves. Some
>- * feature bits are managed elsewhere, so preserve those feature bits
>- * on the master device.
>- */
>-static int bond_compute_features(struct bonding *bond)
>+static u32 bond_fix_features(struct net_device *dev, u32 features)
> {
> struct slave *slave;
>- struct net_device *bond_dev = bond->dev;
>- u32 features = bond_dev->features;
>- u32 vlan_features = 0;
>- unsigned short max_hard_header_len = max((u16)ETH_HLEN,
>- bond_dev->hard_header_len);
>+ struct bonding *bond = netdev_priv(dev);
>+ u32 mask;
> int i;
>
>- features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
>- features |= NETIF_F_GSO_MASK | NETIF_F_NO_CSUM | NETIF_F_NOCACHE_COPY;
>-
> if (!bond->first_slave)
>- goto done;
>+ /* Disable adding VLANs to empty bond. But why? --mq */
>+ return features | NETIF_F_VLAN_CHALLENGED;
>
>+ mask = features;
> features &= ~NETIF_F_ONE_FOR_ALL;
>+ features |= NETIF_F_ALL_FOR_ALL;
>
>- vlan_features = bond->first_slave->dev->vlan_features;
> bond_for_each_slave(bond, slave, i) {
> features = netdev_increment_features(features,
> slave->dev->features,
>- NETIF_F_ONE_FOR_ALL);
>+ mask);
>+ }
>+
>+ return features;
>+}
>+
>+#define BOND_VLAN_FEATURES (NETIF_F_ALL_TX_OFFLOADS | \
>+ NETIF_F_SOFT_FEATURES | \
>+ NETIF_F_LRO)
>+
>+static void bond_compute_features(struct bonding *bond)
>+{
>+ struct slave *slave;
>+ struct net_device *bond_dev = bond->dev;
>+ u32 old_features, vlan_features = BOND_VLAN_FEATURES;
>+ unsigned short max_hard_header_len = ETH_HLEN;
>+ int i;
>+
>+ if (!bond->first_slave)
>+ goto done;
>+
>+ bond_for_each_slave(bond, slave, i) {
> vlan_features = netdev_increment_features(vlan_features,
>- slave->dev->vlan_features,
>- NETIF_F_ONE_FOR_ALL);
>+ slave->dev->vlan_features, BOND_VLAN_FEATURES);
>+
> if (slave->dev->hard_header_len > max_hard_header_len)
> max_hard_header_len = slave->dev->hard_header_len;
> }
>
> done:
>- features |= (bond_dev->features & BOND_VLAN_FEATURES);
>- bond_dev->features = netdev_fix_features(bond_dev, features);
>- bond_dev->vlan_features = netdev_fix_features(bond_dev, vlan_features);
>+ bond_dev->vlan_features = vlan_features;
> bond_dev->hard_header_len = max_hard_header_len;
>
>- return 0;
>+ old_features = bond_dev->features;
>+ netdev_update_features(bond_dev);
>+ if (old_features == bond_dev->features)
>+ netdev_features_change(bond_dev);
> }
>
> static void bond_setup_by_slave(struct net_device *bond_dev,
>@@ -1544,7 +1527,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
> struct netdev_hw_addr *ha;
> struct sockaddr addr;
> int link_reporting;
>- int old_features = bond_dev->features;
> int res = 0;
>
> if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
>@@ -1577,16 +1559,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
> pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
> bond_dev->name, slave_dev->name,
> slave_dev->name, bond_dev->name);
>- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
> }
> } else {
> pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
>- if (bond->slave_cnt == 0) {
>- /* First slave, and it is not VLAN challenged,
>- * so remove the block of adding VLANs over the bond.
>- */
>- bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
>- }
> }
>
> /*
>@@ -1958,7 +1933,7 @@ err_free:
> kfree(new_slave);
>
> err_undo_flags:
>- bond_dev->features = old_features;
>+ bond_compute_features(bond);
>
> return res;
> }
>@@ -1979,6 +1954,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
> struct bonding *bond = netdev_priv(bond_dev);
> struct slave *slave, *oldcurrent;
> struct sockaddr addr;
>+ u32 old_features = bond_dev->features;
>
> /* slave is not a slave or master is not master of this slave */
> if (!(slave_dev->flags & IFF_SLAVE) ||
>@@ -2084,19 +2060,16 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
> */
> memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
>
>- if (!bond->vlgrp) {
>- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
>- } else {
>+ if (bond->vlgrp) {
> pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
> bond_dev->name, bond_dev->name);
> pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
> bond_dev->name);
> }
>- } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
>- !bond_has_challenged_slaves(bond)) {
>+ } else if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
>+ old_features & NETIF_F_VLAN_CHALLENGED) {
> pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
> bond_dev->name, slave_dev->name, bond_dev->name);
>- bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
> }
>
> write_unlock_bh(&bond->lock);
>@@ -2269,9 +2242,7 @@ static int bond_release_all(struct net_device *bond_dev)
> */
> memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
>
>- if (!bond->vlgrp) {
>- bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
>- } else {
>+ if (bond->vlgrp) {
> pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
> bond_dev->name, bond_dev->name);
> pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
>@@ -4347,11 +4318,6 @@ static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
> static const struct ethtool_ops bond_ethtool_ops = {
> .get_drvinfo = bond_ethtool_get_drvinfo,
> .get_link = ethtool_op_get_link,
>- .get_tx_csum = ethtool_op_get_tx_csum,
>- .get_sg = ethtool_op_get_sg,
>- .get_tso = ethtool_op_get_tso,
>- .get_ufo = ethtool_op_get_ufo,
>- .get_flags = ethtool_op_get_flags,
> };
>
> static const struct net_device_ops bond_netdev_ops = {
>@@ -4377,6 +4343,7 @@ static const struct net_device_ops bond_netdev_ops = {
> #endif
> .ndo_add_slave = bond_enslave,
> .ndo_del_slave = bond_release,
>+ .ndo_fix_features = bond_fix_features,
> };
>
> static void bond_destructor(struct net_device *bond_dev)
>@@ -4432,14 +4399,14 @@ static void bond_setup(struct net_device *bond_dev)
> * when there are slaves that are not hw accel
> * capable
> */
>- bond_dev->features |= (NETIF_F_HW_VLAN_TX |
>- NETIF_F_HW_VLAN_RX |
>- NETIF_F_HW_VLAN_FILTER);
>
>- /* By default, we enable GRO on bonding devices.
>- * Actual support requires lowlevel drivers are GRO ready.
>- */
>- bond_dev->features |= NETIF_F_GRO;
>+ bond_dev->hw_features = BOND_VLAN_FEATURES |
>+ NETIF_F_HW_VLAN_TX |
>+ NETIF_F_HW_VLAN_RX |
>+ NETIF_F_HW_VLAN_FILTER;
>+
>+ bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM);
>+ bond_dev->features |= bond_dev->hw_features;
> }
>
> static void bond_work_cancel_all(struct bonding *bond)
>--
>1.7.2.5
>
---
-Jay Vosburgh, IBM Linux Technology Center, fubar@us.ibm.com
^ permalink raw reply
* [PATCH] vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
From: Roland Dreier @ 2011-05-06 18:32 UTC (permalink / raw)
To: Shreyas Bhatewara, David S. Miller; +Cc: pv-drivers, netdev
From: Roland Dreier <roland@purestorage.com>
Using the vmxnet3 driver produces a lockdep warning because
vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
adapter->cmd_lock. However, there are a couple of places where
adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
softirq that tries to take mc->mca_lock could happen while
adapter->cmd_lock is held, leading to an AB-BA deadlock.
I'm not sure if this is a real potential deadlock or not, but the
simplest and best fix seems to be simply to make sure we take cmd_lock
with spin_lock_irqsave() everywhere -- the places with plain spin_lock
just look like oversights.
The full enormous lockdep warning is:
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
2.6.39-rc6+ #1
---------------------------------------------------------
ifconfig/567 just changed the state of lock:
(&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&(&adapter->cmd_lock)->rlock){+.+...}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
4 locks held by ifconfig/567:
#0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20
#1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
#2: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
#3: (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280
the shortest dependencies between 2nd lock and 1st lock:
-> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
HARDIRQ-ON-W at:
[<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
SOFTIRQ-ON-W at:
[<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
}
... key at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
... acquired at:
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
[<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
[<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
[<ffffffff81470040>] dev_set_rx_mode+0x30/0x50
[<ffffffff81470127>] __dev_open+0xc7/0x100
[<ffffffff814703c1>] __dev_change_flags+0xa1/0x180
[<ffffffff81470568>] dev_change_flags+0x28/0x70
[<ffffffff814da960>] devinet_ioctl+0x730/0x800
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
-> (_xmit_ETHER){+.....} ops: 6 {
HARDIRQ-ON-W at:
[<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81475618>] __dev_mc_add+0x38/0x90
[<ffffffff814756a0>] dev_mc_add+0x10/0x20
[<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81475618>] __dev_mc_add+0x38/0x90
[<ffffffff814756a0>] dev_mc_add+0x10/0x20
[<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
}
... key at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
... acquired at:
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81475618>] __dev_mc_add+0x38/0x90
[<ffffffff814756a0>] dev_mc_add+0x10/0x20
[<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<ffffffff81373a2e>] driver_attach+0x1e/0x20
[<ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<ffffffff813745b6>] driver_register+0x76/0x140
[<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
-> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
HARDIRQ-ON-W at:
[<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
[<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
[<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
IN-SOFTIRQ-W at:
[<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<ffffffff810666d0>] __do_softirq+0xc0/0x210
[<ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<ffffffff8100d42d>] do_softirq+0xad/0xe0
[<ffffffff81066afe>] irq_exit+0x9e/0xb0
[<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
[<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<ffffffff814da731>] devinet_ioctl+0x501/0x800
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
[<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
[<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
[<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
}
... key at: [<ffffffff82801be2>] __key.40877+0x0/0x8
... acquired at:
[<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
[<ffffffff8109a32c>] mark_lock+0x19c/0x400
[<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<ffffffff810666d0>] __do_softirq+0xc0/0x210
[<ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<ffffffff8100d42d>] do_softirq+0xad/0xe0
[<ffffffff81066afe>] irq_exit+0x9e/0xb0
[<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
[<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<ffffffff814da731>] devinet_ioctl+0x501/0x800
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
stack backtrace:
Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
Call Trace:
<IRQ> [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
[<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
[<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
[<ffffffff8109a32c>] mark_lock+0x19c/0x400
[<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<ffffffff8109a383>] ? mark_lock+0x1f3/0x400
[<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
[<ffffffff81012255>] ? native_sched_clock+0x15/0x70
[<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
[<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
[<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
[<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
[<ffffffff810122b9>] ? sched_clock+0x9/0x10
[<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
[<ffffffff810666d0>] __do_softirq+0xc0/0x210
[<ffffffff8109455f>] ? tick_program_event+0x1f/0x30
[<ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<ffffffff8100d42d>] do_softirq+0xad/0xe0
[<ffffffff81066afe>] irq_exit+0x9e/0xb0
[<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
<EOI> [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13
[<ffffffff810974a7>] ? lock_is_held+0x17/0xd0
[<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<ffffffff814da731>] devinet_ioctl+0x501/0x800
[<ffffffff8108a3af>] ? local_clock+0x6f/0x80
[<ffffffff81575898>] ? do_page_fault+0x268/0x560
[<ffffffff814db508>] inet_ioctl+0x88/0xa0
[<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
[<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<ffffffff8117737e>] ? fget_light+0x33e/0x430
[<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
[<ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
Signed-off-by: Roland Dreier <roland@purestorage.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 0d47c3a..c16ed96 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -178,6 +178,7 @@ static void
vmxnet3_process_events(struct vmxnet3_adapter *adapter)
{
int i;
+ unsigned long flags;
u32 events = le32_to_cpu(adapter->shared->ecr);
if (!events)
return;
@@ -190,10 +191,10 @@ vmxnet3_process_events(struct vmxnet3_adapter *adapter)
/* Check if there is an error on xmit/recv queues */
if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) {
- spin_lock(&adapter->cmd_lock);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
VMXNET3_CMD_GET_QUEUE_STATUS);
- spin_unlock(&adapter->cmd_lock);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
for (i = 0; i < adapter->num_tx_queues; i++)
if (adapter->tqd_start[i].status.stopped)
@@ -2733,13 +2734,14 @@ static void
vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
{
u32 cfg;
+ unsigned long flags;
/* intr settings */
- spin_lock(&adapter->cmd_lock);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
VMXNET3_CMD_GET_CONF_INTR);
cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
- spin_unlock(&adapter->cmd_lock);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
adapter->intr.type = cfg & 0x3;
adapter->intr.mask_mode = (cfg >> 2) & 0x3;
^ permalink raw reply related
* [PATCH] hamachi: Delete TX checksumming code commented out since 1999
From: David Miller @ 2011-05-06 18:59 UTC (permalink / raw)
To: netdev
TX checksumming support has been ifdef commented out of this driver
for more than 10 years, and it makes references to aspects of the IPv4
stack from back then as well.
If someone has one of these rare cards and wants to properly resurrect
TX checksumming support, they can still get at this code in the
version control history.
Signed-off-by: David S. Miller <davem@davemloft.net>
---
I stumbled over this cruft while auditing ip_queue_xmit() users.
drivers/net/hamachi.c | 79 -------------------------------------------------
1 files changed, 0 insertions(+), 79 deletions(-)
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 80d25ed..f5fba73 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -132,14 +132,8 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
/*
* RX_CHECKSUM turns on card-generated receive checksum generation for
* TCP and UDP packets. Otherwise the upper layers do the calculation.
- * TX_CHECKSUM won't do anything too useful, even if it works. There's no
- * easy mechanism by which to tell the TCP/UDP stack that it need not
- * generate checksums for this device. But if somebody can find a way
- * to get that to work, most of the card work is in here already.
* 3/10/1999 Pete Wyckoff <wyckoff@ca.sandia.gov>
*/
-#undef TX_CHECKSUM
-#define RX_CHECKSUM
/* Operational parameters that usually are not changed. */
/* Time in jiffies before concluding the transmitter is hung. */
@@ -630,11 +624,6 @@ static int __devinit hamachi_init_one (struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
-#ifdef TX_CHECKSUM
- printk("check that skbcopy in ip_queue_xmit isn't happening\n");
- dev->hard_header_len += 8; /* for cksum tag */
-#endif
-
for (i = 0; i < 6; i++)
dev->dev_addr[i] = 1 ? read_eeprom(ioaddr, 4 + i)
: readb(ioaddr + StationAddr + i);
@@ -937,11 +926,7 @@ static int hamachi_open(struct net_device *dev)
/* always 1, takes no more time to do it */
writew(0x0001, ioaddr + RxChecksum);
-#ifdef TX_CHECKSUM
- writew(0x0001, ioaddr + TxChecksum);
-#else
writew(0x0000, ioaddr + TxChecksum);
-#endif
writew(0x8000, ioaddr + MACCnfg); /* Soft reset the MAC */
writew(0x215F, ioaddr + MACCnfg);
writew(0x000C, ioaddr + FrameGap0);
@@ -1226,40 +1211,6 @@ static void hamachi_init_ring(struct net_device *dev)
}
-#ifdef TX_CHECKSUM
-#define csum_add(it, val) \
-do { \
- it += (u16) (val); \
- if (it & 0xffff0000) { \
- it &= 0xffff; \
- ++it; \
- } \
-} while (0)
- /* printk("add %04x --> %04x\n", val, it); \ */
-
-/* uh->len already network format, do not swap */
-#define pseudo_csum_udp(sum,ih,uh) do { \
- sum = 0; \
- csum_add(sum, (ih)->saddr >> 16); \
- csum_add(sum, (ih)->saddr & 0xffff); \
- csum_add(sum, (ih)->daddr >> 16); \
- csum_add(sum, (ih)->daddr & 0xffff); \
- csum_add(sum, cpu_to_be16(IPPROTO_UDP)); \
- csum_add(sum, (uh)->len); \
-} while (0)
-
-/* swap len */
-#define pseudo_csum_tcp(sum,ih,len) do { \
- sum = 0; \
- csum_add(sum, (ih)->saddr >> 16); \
- csum_add(sum, (ih)->saddr & 0xffff); \
- csum_add(sum, (ih)->daddr >> 16); \
- csum_add(sum, (ih)->daddr & 0xffff); \
- csum_add(sum, cpu_to_be16(IPPROTO_TCP)); \
- csum_add(sum, htons(len)); \
-} while (0)
-#endif
-
static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
@@ -1292,36 +1243,6 @@ static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
hmp->tx_skbuff[entry] = skb;
-#ifdef TX_CHECKSUM
- {
- /* tack on checksum tag */
- u32 tagval = 0;
- struct ethhdr *eh = (struct ethhdr *)skb->data;
- if (eh->h_proto == cpu_to_be16(ETH_P_IP)) {
- struct iphdr *ih = (struct iphdr *)((char *)eh + ETH_HLEN);
- if (ih->protocol == IPPROTO_UDP) {
- struct udphdr *uh
- = (struct udphdr *)((char *)ih + ih->ihl*4);
- u32 offset = ((unsigned char *)uh + 6) - skb->data;
- u32 pseudo;
- pseudo_csum_udp(pseudo, ih, uh);
- pseudo = htons(pseudo);
- printk("udp cksum was %04x, sending pseudo %04x\n",
- uh->check, pseudo);
- uh->check = 0; /* zero out uh->check before card calc */
- /*
- * start at 14 (skip ethhdr), store at offset (uh->check),
- * use pseudo value given.
- */
- tagval = (14 << 24) | (offset << 16) | pseudo;
- } else if (ih->protocol == IPPROTO_TCP) {
- printk("tcp, no auto cksum\n");
- }
- }
- *(u32 *)skb_push(skb, 8) = tagval;
- }
-#endif
-
hmp->tx_ring[entry].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
skb->data, skb->len, PCI_DMA_TODEVICE));
--
1.7.5.1
^ permalink raw reply related
* Re: [PATCH] vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
From: Shreyas Bhatewara @ 2011-05-06 19:21 UTC (permalink / raw)
To: Roland Dreier
Cc: David S. Miller, pv-drivers@vmware.com, netdev@vger.kernel.org
In-Reply-To: <1304706773-21348-1-git-send-email-roland@kernel.org>
On Fri, 6 May 2011, Roland Dreier wrote:
> From: Roland Dreier <roland@purestorage.com>
>
> Using the vmxnet3 driver produces a lockdep warning because
> Signed-off-by: Roland Dreier <roland@purestorage.com>
Roland, thanks for the analysis and the patch.
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
^ permalink raw reply
* ip_queue_xmit() used illegally
From: David Miller @ 2011-05-06 19:26 UTC (permalink / raw)
To: netdev; +Cc: vladislav.yasevich, yjwei, jchapman
Several users of ip_queue_xmit() use it illegally.
I've only audited L2TP and SCTP so far, and they both cannot use
ip_queue_xmit() with the way they operate currently.
The issue surrounds how the socket binding is maintained in
inet->inet_daddr, inet->inet_saddr etc.
TCP does things right, in that ip_queue_xmit() is only invoked with
inet->inet_daddr and inet->inet_saddr having fully resolved, final,
fully connected values.
This is an absolute requirement because if the socket's route
invalidates (which happens completely asynchronously) it's going to
lookup a new route using whatever is stored in
inet->inet_{daddr,saddr} and then use those addresses to build the
packet. Even if ->inet_{saddr,daddr} are both zero this will still
emit a packet (bonus points if you know what addresses will be picked,
no peeking at route.c :-).
SCTP stores it's binding information using transports and assosciations
and does not fill in the ->inet_{daddr,saddr} values.
It tries to work around this route issue by checking dst->obsolete
directly in sctp_packet_transmit(), which just makes the race smaller
and does not eliminate it. ip_queue_xmit() can still end up with
__sk_dst_check() returning NULL and then we end up emitting a
potentially bogus packet.
L2TP supports more of a datagram type socket semantic than a stream
one, it allows unconnected modes of operation. And for this reason
it also cannot use ip_queue_xmit() legally.
After a quick cursory scan it seem like DCCP is OK.
I think SCTP could potentially be fixed by simply filling in the
inet->inet_{daddr,saddr} values when it makes an internal binding
of the transport via sctp_transport_route().
L2TP on the other hand will need to use another interface to send ipv4
packets because it allows disconnected operation.
^ permalink raw reply
* future developments of usbnet
From: Oliver Neukum @ 2011-05-06 18:45 UTC (permalink / raw)
To: netdev, linux-usb
Hi,
I'd like to get a feeling what people are working out there regarding usbnet.
So please, if you do something, or think something ought to be done, please
speak up now.
IMHO usbnet needs better support for
- batching protocols
- double buffering on the rx path
with the latter having higher priority.
Coments?
Regards
Oliver
^ permalink raw reply
* Re: [PATCH] dccp: handle invalid feature options length
From: Gerrit Renker @ 2011-05-06 19:57 UTC (permalink / raw)
To: Dan Rosenberg; +Cc: davem, dccp, netdev, linux-kernel, security
In-Reply-To: <1304688438.29544.16.camel@dan>
Quoting Dan Rosenberg:
| A length of zero (after subtracting two for the type and len fields) for
| the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
| the subtraction. The subsequent code may read past the end of the
| options value buffer when parsing. I'm unsure of what the consequences
| of this might be, but it's probably not good.
|
Please disregard my earlier message, I erred.
Dan is right, his patch is correct and definitively valid.
A length of 0 would be cast to 0xff and then cause buffer overrun.
| Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
| Cc: stable@kernel.org
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
^ permalink raw reply
* Re: [PATCH] dccp: handle invalid feature options length
From: David Miller @ 2011-05-06 20:04 UTC (permalink / raw)
To: gerrit; +Cc: drosenberg, dccp, netdev, linux-kernel, security
In-Reply-To: <20110506195733.GA3527@gerrit.erg.abdn.ac.uk>
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Date: Fri, 6 May 2011 21:57:33 +0200
> Quoting Dan Rosenberg:
> | A length of zero (after subtracting two for the type and len fields) for
> | the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
> | the subtraction. The subsequent code may read past the end of the
> | options value buffer when parsing. I'm unsure of what the consequences
> | of this might be, but it's probably not good.
> |
> Please disregard my earlier message, I erred.
> Dan is right, his patch is correct and definitively valid.
> A length of 0 would be cast to 0xff and then cause buffer overrun.
>
> | Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
> | Cc: stable@kernel.org
> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Great, I'll apply this, thanks!
^ permalink raw reply
* RE: [Pv-drivers] [PATCH] vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
From: Scott Goldman @ 2011-05-06 20:10 UTC (permalink / raw)
To: Shreyas Bhatewara, Roland Dreier
Cc: pv-drivers@vmware.com, netdev@vger.kernel.org, David S. Miller
In-Reply-To: <alpine.LRH.2.00.1105061206500.26660@sbhatewara-dev1.eng.vmware.com>
>
> On Fri, 6 May 2011, Roland Dreier wrote:
>
> > From: Roland Dreier <roland@purestorage.com>
> >
> > Using the vmxnet3 driver produces a lockdep warning because
>
> > Signed-off-by: Roland Dreier <roland@purestorage.com>
>
>
> Roland, thanks for the analysis and the patch.
>
> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Likewise, seems pretty sane to me. The command register operations are only control-path operations and disabling interrupts for the duration is probably not a big deal. Touching the cmd reg will result a VMEXIT, where the guest won't be processing interrupts anyway.
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
^ permalink raw reply
* Re: [Pv-drivers] [PATCH] vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
From: David Miller @ 2011-05-06 20:12 UTC (permalink / raw)
To: scottjg; +Cc: sbhatewara, roland, pv-drivers, netdev
In-Reply-To: <F78BCF638F95D74A99D036114107EDB5028EFAA0F8@EXCH-MBX-3.vmware.com>
From: Scott Goldman <scottjg@vmware.com>
Date: Fri, 6 May 2011 13:10:29 -0700
>>
>> On Fri, 6 May 2011, Roland Dreier wrote:
>>
>> > From: Roland Dreier <roland@purestorage.com>
>> >
>> > Using the vmxnet3 driver produces a lockdep warning because
>>
>> > Signed-off-by: Roland Dreier <roland@purestorage.com>
>>
>>
>> Roland, thanks for the analysis and the patch.
>>
>> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
>
> Likewise, seems pretty sane to me. The command register operations are only control-path operations and disabling interrupts for the duration is probably not a big deal. Touching the cmd reg will result a VMEXIT, where the guest won't be processing interrupts anyway.
>
> Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Applied, thanks everyone.
^ permalink raw reply
* Re: ip_queue_xmit() used illegally
From: David Miller @ 2011-05-06 20:21 UTC (permalink / raw)
To: netdev; +Cc: vladislav.yasevich, yjwei, jchapman
In-Reply-To: <20110506.122656.189696988.davem@davemloft.net>
From: David Miller <davem@davemloft.net>
Date: Fri, 06 May 2011 12:26:56 -0700 (PDT)
> SCTP stores it's binding information using transports and assosciations
> and does not fill in the ->inet_{daddr,saddr} values.
>
> It tries to work around this route issue by checking dst->obsolete
> directly in sctp_packet_transmit(), which just makes the race smaller
> and does not eliminate it. ip_queue_xmit() can still end up with
> __sk_dst_check() returning NULL and then we end up emitting a
> potentially bogus packet.
I take this back, we added this hack where things like SCTP can
pre-route the packet by hooking up the route to the SKB before
calling ->queue_xmit.
And L2TP does something similar.
So false alarm, nothing to see here :-)
I still want to clean this up so that this kind of stuff can be
handled generically inside of ->queue_xmit() by passing in the correct
addressing information.
^ permalink raw reply
* Re: ip_queue_xmit() used illegally
From: Vladislav Yasevich @ 2011-05-06 21:10 UTC (permalink / raw)
To: David Miller; +Cc: netdev, yjwei, jchapman
In-Reply-To: <20110506.132129.59693228.davem@davemloft.net>
On 05/06/2011 04:21 PM, David Miller wrote:
> From: David Miller <davem@davemloft.net>
> Date: Fri, 06 May 2011 12:26:56 -0700 (PDT)
>
>> SCTP stores it's binding information using transports and assosciations
>> and does not fill in the ->inet_{daddr,saddr} values.
>>
>> It tries to work around this route issue by checking dst->obsolete
>> directly in sctp_packet_transmit(), which just makes the race smaller
>> and does not eliminate it. ip_queue_xmit() can still end up with
>> __sk_dst_check() returning NULL and then we end up emitting a
>> potentially bogus packet.
>
> I take this back, we added this hack where things like SCTP can
> pre-route the packet by hooking up the route to the SKB before
> calling ->queue_xmit.
>
> And L2TP does something similar.
>
> So false alarm, nothing to see here :-)
>
> I still want to clean this up so that this kind of stuff can be
> handled generically inside of ->queue_xmit() by passing in the correct
> addressing information.
>
Wow, You had me scrambling there for a while. I was just about to send note
about the pre-hooked route, but you beat me to it.
The reason why sctp doesn't change the inet_addr, is because that address can theoretically
change on ever packet transmit due to multi-homing nature of SCTP.
I'll take a look at ->queue_xmit() to see if SCTP can convert to using that.
-vlad
^ permalink raw reply
* Re: ip_queue_xmit() used illegally
From: David Miller @ 2011-05-06 21:28 UTC (permalink / raw)
To: vladislav.yasevich; +Cc: netdev, yjwei, jchapman
In-Reply-To: <4DC463C7.5030407@hp.com>
From: Vladislav Yasevich <vladislav.yasevich@hp.com>
Date: Fri, 06 May 2011 17:10:31 -0400
> I'll take a look at ->queue_xmit() to see if SCTP can convert to using that.
It already does via sctp_v4_queue_xmit() --> ip_queue_xmit().
I have a plan which I'm working on already, it will involve putting
a "struct flowi" into the sctp_transport.
^ permalink raw reply
* [PATCH 0/2] Optimize corking further.
From: David Miller @ 2011-05-06 22:26 UTC (permalink / raw)
To: netdev; +Cc: herbert, eric.dumazet
For the on-stack corking case, we initialize the inet_cork twice.
Furthermore the paths that inspect the inet_cork in ip_output.c
do not care at all about the flow which is large.
Split inet_cork up and optimize the initialization in the on-stack
case.
Results for "udpflood -l 10000000 ${IP_ADDR}" on Niagara2+ @ 1.2GHz
Before 1m45s
After 1m40s
Signed-off-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply
* [PATCH 1/2] inet: Decrease overhead of on-stack inet_cork.
From: David Miller @ 2011-05-06 22:26 UTC (permalink / raw)
To: netdev; +Cc: herbert, eric.dumazet
When we fast path datagram sends to avoid locking by putting
the inet_cork on the stack we use up lots of space that isn't
necessary.
This is because inet_cork contains a "struct flowi" which isn't
used in these code paths.
Split inet_cork to two parts, "inet_cork" and "inet_cork_full".
Only the latter of which has the "struct flowi" and is what is
stored in inet_sock.
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/net/inet_sock.h | 12 ++++++++----
include/net/ip.h | 2 +-
net/ipv4/ip_output.c | 22 ++++++++++++----------
net/ipv6/ip6_output.c | 34 ++++++++++++++++++----------------
net/ipv6/raw.c | 4 ++--
5 files changed, 41 insertions(+), 33 deletions(-)
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index ed2ba6e..caaff5f 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -96,17 +96,21 @@ static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk)
struct inet_cork {
unsigned int flags;
- unsigned int fragsize;
+ __be32 addr;
struct ip_options *opt;
+ unsigned int fragsize;
struct dst_entry *dst;
int length; /* Total length of all frames */
- __be32 addr;
- struct flowi fl;
struct page *page;
u32 off;
u8 tx_flags;
};
+struct inet_cork_full {
+ struct inet_cork base;
+ struct flowi fl;
+};
+
struct ip_mc_socklist;
struct ipv6_pinfo;
struct rtable;
@@ -164,7 +168,7 @@ struct inet_sock {
int mc_index;
__be32 mc_addr;
struct ip_mc_socklist __rcu *mc_list;
- struct inet_cork cork;
+ struct inet_cork_full cork;
};
#define IPCORK_OPT 1 /* ip-options has been held in ipcork.opt */
diff --git a/include/net/ip.h b/include/net/ip.h
index 3a59bf9..095e392 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -132,7 +132,7 @@ extern struct sk_buff *ip_make_skb(struct sock *sk,
static inline struct sk_buff *ip_finish_skb(struct sock *sk)
{
- return __ip_make_skb(sk, &sk->sk_write_queue, &inet_sk(sk)->cork);
+ return __ip_make_skb(sk, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
}
/* datagram.c */
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index db38c18..eb0647a 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1096,14 +1096,14 @@ int ip_append_data(struct sock *sk,
return 0;
if (skb_queue_empty(&sk->sk_write_queue)) {
- err = ip_setup_cork(sk, &inet->cork, ipc, rtp);
+ err = ip_setup_cork(sk, &inet->cork.base, ipc, rtp);
if (err)
return err;
} else {
transhdrlen = 0;
}
- return __ip_append_data(sk, &sk->sk_write_queue, &inet->cork, getfrag,
+ return __ip_append_data(sk, &sk->sk_write_queue, &inet->cork.base, getfrag,
from, length, transhdrlen, flags);
}
@@ -1114,6 +1114,7 @@ ssize_t ip_append_page(struct sock *sk, struct page *page,
struct sk_buff *skb;
struct rtable *rt;
struct ip_options *opt = NULL;
+ struct inet_cork *cork;
int hh_len;
int mtu;
int len;
@@ -1129,20 +1130,21 @@ ssize_t ip_append_page(struct sock *sk, struct page *page,
if (skb_queue_empty(&sk->sk_write_queue))
return -EINVAL;
- rt = (struct rtable *)inet->cork.dst;
- if (inet->cork.flags & IPCORK_OPT)
- opt = inet->cork.opt;
+ cork = &inet->cork.base;
+ rt = (struct rtable *)cork->dst;
+ if (cork->flags & IPCORK_OPT)
+ opt = cork->opt;
if (!(rt->dst.dev->features&NETIF_F_SG))
return -EOPNOTSUPP;
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
- mtu = inet->cork.fragsize;
+ mtu = cork->fragsize;
fragheaderlen = sizeof(struct iphdr) + (opt ? opt->optlen : 0);
maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
- if (inet->cork.length + size > 0xFFFF - fragheaderlen) {
+ if (cork->length + size > 0xFFFF - fragheaderlen) {
ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport, mtu);
return -EMSGSIZE;
}
@@ -1150,7 +1152,7 @@ ssize_t ip_append_page(struct sock *sk, struct page *page,
if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
return -EINVAL;
- inet->cork.length += size;
+ cork->length += size;
if ((size + skb->len > mtu) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO)) {
@@ -1245,7 +1247,7 @@ ssize_t ip_append_page(struct sock *sk, struct page *page,
return 0;
error:
- inet->cork.length -= size;
+ cork->length -= size;
IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTDISCARDS);
return err;
}
@@ -1396,7 +1398,7 @@ static void __ip_flush_pending_frames(struct sock *sk,
void ip_flush_pending_frames(struct sock *sk)
{
- __ip_flush_pending_frames(sk, &sk->sk_write_queue, &inet_sk(sk)->cork);
+ __ip_flush_pending_frames(sk, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
}
struct sk_buff *ip_make_skb(struct sock *sk,
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 4cfbb24..9d4b165 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1150,6 +1150,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
{
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
+ struct inet_cork *cork;
struct sk_buff *skb;
unsigned int maxfraglen, fragheaderlen;
int exthdrlen;
@@ -1163,6 +1164,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
if (flags&MSG_PROBE)
return 0;
+ cork = &inet->cork.base;
if (skb_queue_empty(&sk->sk_write_queue)) {
/*
* setup for corking
@@ -1202,7 +1204,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
/* need source address above miyazawa*/
}
dst_hold(&rt->dst);
- inet->cork.dst = &rt->dst;
+ cork->dst = &rt->dst;
inet->cork.fl.u.ip6 = *fl6;
np->cork.hop_limit = hlimit;
np->cork.tclass = tclass;
@@ -1212,10 +1214,10 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
if (np->frag_size)
mtu = np->frag_size;
}
- inet->cork.fragsize = mtu;
+ cork->fragsize = mtu;
if (dst_allfrag(rt->dst.path))
- inet->cork.flags |= IPCORK_ALLFRAG;
- inet->cork.length = 0;
+ cork->flags |= IPCORK_ALLFRAG;
+ cork->length = 0;
sk->sk_sndmsg_page = NULL;
sk->sk_sndmsg_off = 0;
exthdrlen = rt->dst.header_len + (opt ? opt->opt_flen : 0) -
@@ -1223,12 +1225,12 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
length += exthdrlen;
transhdrlen += exthdrlen;
} else {
- rt = (struct rt6_info *)inet->cork.dst;
+ rt = (struct rt6_info *)cork->dst;
fl6 = &inet->cork.fl.u.ip6;
opt = np->cork.opt;
transhdrlen = 0;
exthdrlen = 0;
- mtu = inet->cork.fragsize;
+ mtu = cork->fragsize;
}
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
@@ -1238,7 +1240,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen - sizeof(struct frag_hdr);
if (mtu <= sizeof(struct ipv6hdr) + IPV6_MAXPLEN) {
- if (inet->cork.length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
+ if (cork->length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
ipv6_local_error(sk, EMSGSIZE, fl6, mtu-exthdrlen);
return -EMSGSIZE;
}
@@ -1267,7 +1269,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
* --yoshfuji
*/
- inet->cork.length += length;
+ cork->length += length;
if (length > mtu) {
int proto = sk->sk_protocol;
if (dontfrag && (proto == IPPROTO_UDP || proto == IPPROTO_RAW)){
@@ -1292,7 +1294,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
while (length > 0) {
/* Check if the remaining data fits into current packet. */
- copy = (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
+ copy = (cork->length <= mtu && !(cork->flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
if (copy < length)
copy = maxfraglen - skb->len;
@@ -1317,7 +1319,7 @@ alloc_new_skb:
* we know we need more fragment(s).
*/
datalen = length + fraggap;
- if (datalen > (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - fragheaderlen)
+ if (datalen > (cork->length <= mtu && !(cork->flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - fragheaderlen)
datalen = maxfraglen - fragheaderlen;
fraglen = datalen + fragheaderlen;
@@ -1481,7 +1483,7 @@ alloc_new_skb:
}
return 0;
error:
- inet->cork.length -= length;
+ cork->length -= length;
IP6_INC_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
return err;
}
@@ -1497,10 +1499,10 @@ static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np)
np->cork.opt = NULL;
}
- if (inet->cork.dst) {
- dst_release(inet->cork.dst);
- inet->cork.dst = NULL;
- inet->cork.flags &= ~IPCORK_ALLFRAG;
+ if (inet->cork.base.dst) {
+ dst_release(inet->cork.base.dst);
+ inet->cork.base.dst = NULL;
+ inet->cork.base.flags &= ~IPCORK_ALLFRAG;
}
memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
}
@@ -1515,7 +1517,7 @@ int ip6_push_pending_frames(struct sock *sk)
struct net *net = sock_net(sk);
struct ipv6hdr *hdr;
struct ipv6_txoptions *opt = np->cork.opt;
- struct rt6_info *rt = (struct rt6_info *)inet->cork.dst;
+ struct rt6_info *rt = (struct rt6_info *)inet->cork.base.dst;
struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
unsigned char proto = fl6->flowi6_proto;
int err = 0;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index e5e5425..ae64984 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -542,8 +542,8 @@ static int rawv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
goto out;
offset = rp->offset;
- total_len = inet_sk(sk)->cork.length - (skb_network_header(skb) -
- skb->data);
+ total_len = inet_sk(sk)->cork.base.length - (skb_network_header(skb) -
+ skb->data);
if (offset >= total_len - 1) {
err = -EINVAL;
ip6_flush_pending_frames(sk);
--
1.7.5.1
^ permalink raw reply related
* [PATCH 2/2] ipv4: Initialize on-stack cork more efficiently.
From: David Miller @ 2011-05-06 22:26 UTC (permalink / raw)
To: netdev; +Cc: herbert, eric.dumazet
ip_setup_cork() explicitly initializes every member of
inet_cork except flags, addr, and opt. So we can simply
set those three members to zero instead of using a
memset() via an empty struct assignment.
Signed-off-by: David S. Miller <davem@davemloft.net>
---
net/ipv4/ip_output.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index eb0647a..5f5fe4f 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1408,7 +1408,7 @@ struct sk_buff *ip_make_skb(struct sock *sk,
struct ipcm_cookie *ipc, struct rtable **rtp,
unsigned int flags)
{
- struct inet_cork cork = {};
+ struct inet_cork cork;
struct sk_buff_head queue;
int err;
@@ -1417,6 +1417,9 @@ struct sk_buff *ip_make_skb(struct sock *sk,
__skb_queue_head_init(&queue);
+ cork.flags = 0;
+ cork.addr = 0;
+ cork.opt = 0;
err = ip_setup_cork(sk, &cork, ipc, rtp);
if (err)
return ERR_PTR(err);
--
1.7.5.1
^ permalink raw reply related
* Re: [PATCH 2/2] ipv4: Initialize on-stack cork more efficiently.
From: Eric Dumazet @ 2011-05-06 22:35 UTC (permalink / raw)
To: David Miller; +Cc: netdev, herbert
In-Reply-To: <20110506.152623.232747437.davem@davemloft.net>
Le vendredi 06 mai 2011 à 15:26 -0700, David Miller a écrit :
> ip_setup_cork() explicitly initializes every member of
> inet_cork except flags, addr, and opt. So we can simply
> set those three members to zero instead of using a
> memset() via an empty struct assignment.
>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> ---
> net/ipv4/ip_output.c | 5 ++++-
> 1 files changed, 4 insertions(+), 1 deletions(-)
>
> diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
> index eb0647a..5f5fe4f 100644
> --- a/net/ipv4/ip_output.c
> +++ b/net/ipv4/ip_output.c
> @@ -1408,7 +1408,7 @@ struct sk_buff *ip_make_skb(struct sock *sk,
> struct ipcm_cookie *ipc, struct rtable **rtp,
> unsigned int flags)
> {
> - struct inet_cork cork = {};
> + struct inet_cork cork;
> struct sk_buff_head queue;
> int err;
>
> @@ -1417,6 +1417,9 @@ struct sk_buff *ip_make_skb(struct sock *sk,
>
> __skb_queue_head_init(&queue);
>
> + cork.flags = 0;
> + cork.addr = 0;
> + cork.opt = 0;
> err = ip_setup_cork(sk, &cork, ipc, rtp);
> if (err)
> return ERR_PTR(err);
Very nice, thanks for finishing this stuff :)
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
^ permalink raw reply
* Re: [PATCH 2/2] ipv4: Initialize on-stack cork more efficiently.
From: David Miller @ 2011-05-06 22:37 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev, herbert
In-Reply-To: <1304721317.2821.156.camel@edumazet-laptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Sat, 07 May 2011 00:35:17 +0200
> Very nice, thanks for finishing this stuff :)
>
> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
No problem, thanks for reviewing :-)
^ permalink raw reply
* Re: [PATCH 2/2] ipv4: Initialize on-stack cork more efficiently.
From: Joe Perches @ 2011-05-06 22:44 UTC (permalink / raw)
To: David Miller; +Cc: netdev, herbert, eric.dumazet
In-Reply-To: <20110506.152623.232747437.davem@davemloft.net>
On Fri, 2011-05-06 at 15:26 -0700, David Miller wrote:
> ip_setup_cork() explicitly initializes every member of
> inet_cork except flags, addr, and opt. So we can simply
> set those three members to zero instead of using a
> memset() via an empty struct assignment.
> Signed-off-by: David S. Miller <davem@davemloft.net>
> diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
[]
> @@ -1417,6 +1417,9 @@ struct sk_buff *ip_make_skb(struct sock *sk,
>
> __skb_queue_head_init(&queue);
>
> + cork.flags = 0;
> + cork.addr = 0;
> + cork.opt = 0;
cork.opt = NULL;
> err = ip_setup_cork(sk, &cork, ipc, rtp);
> if (err)
> return ERR_PTR(err);
Perhaps it'd be better to move the initialization
of all cork fields to ip_setup_cork.
^ permalink raw reply
* Re: [PATCH 2/2] ipv4: Initialize on-stack cork more efficiently.
From: David Miller @ 2011-05-06 22:59 UTC (permalink / raw)
To: joe; +Cc: netdev, herbert, eric.dumazet
In-Reply-To: <1304721894.11874.28.camel@Joe-Laptop>
From: Joe Perches <joe@perches.com>
Date: Fri, 06 May 2011 15:44:54 -0700
> Perhaps it'd be better to move the initialization
> of all cork fields to ip_setup_cork.
We can't, the flags and other fields can be setup way up high in the
call chain when the inet->cork instance is used.
I'll fix the NULL assignment, thanks.
^ permalink raw reply
* Re: Question for canutils
From: Marc Kleine-Budde @ 2011-05-06 23:58 UTC (permalink / raw)
To: Tomoya MORINAGA
Cc: socketcan-core-0fE9KPoRgkgATYTw5x5z8w,
netdev-u79uwXL29TY76Z2rM5mHXA,
toshiharu-linux-ECg8zkTtlr0C6LszWs/t0g,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
'Wolfgang Grandegger'
In-Reply-To: <A42D429EA0C74B64BB1BFE96BBFA9815-c0cKtqp5df7I9507bXv2FdBPR1lH4CV8@public.gmane.org>
[-- Attachment #1.1: Type: text/plain, Size: 2393 bytes --]
On 05/06/2011 02:37 AM, Tomoya MORINAGA wrote:
> Hi Marc,
>
> On Wednesday, April 27, 2011 10:51 PM, Marc Kleine-Budde wrote:
>> Into which location?
>>
>> Please send me the output of:
>>
>> ls -l /usr/local/lib
>> ls -l /usr/local/lib/pkgconfig
>
> [morinaga@localhost ~]$
> [morinaga@localhost ~]$ ls -l /usr/local/lib
> 合計 1412
> -rw-r--r--. 1 root root 103226 2011-01-13 16:56 libhistory.a
> lrwxrwxrwx. 1 root root 15 2011-01-13 16:56 libhistory.so -> libhistory.so.6
> lrwxrwxrwx. 1 root root 17 2011-01-13 16:56 libhistory.so.6 -> libhistory.so.6.0
> -r-xr-xr-x. 1 root root 80204 2011-01-13 16:56 libhistory.so.6.0
> -rw-r--r--. 1 root root 686760 2011-01-13 16:56 libreadline.a
> lrwxrwxrwx. 1 root root 16 2011-01-13 16:56 libreadline.so -> libreadline.so.6
> lrwxrwxrwx. 1 root root 18 2011-01-13 16:56 libreadline.so.6 -> libreadline.so.6.0
> -r-xr-xr-x. 1 root root 498839 2011-01-13 16:56 libreadline.so.6.0
> -rw-r--r--. 1 root root 28718 2011-04-27 15:40 libsocketcan.a
> -rwxr-xr-x. 1 root root 843 2011-04-27 15:40 libsocketcan.la
> lrwxrwxrwx. 1 root root 21 2011-04-27 15:40 libsocketcan.so -> libsocketcan.so.2.2.0
> lrwxrwxrwx. 1 root root 21 2011-04-27 15:40 libsocketcan.so.2 -> libsocketcan.so.2.2.0
> -rwxr-xr-x. 1 root root 27835 2011-04-27 15:40 libsocketcan.so.2.2.0
> drwxr-xr-x. 2 root root 4096 2011-04-27 15:53 pkgconfig
> [morinaga@localhost ~]$ ls -l /usr/local/lib/pkgconfig/
> 合計 8
> -rw-r--r--. 1 root root 198 2011-04-27 15:53 canutils.pc
> -rw-r--r--. 1 root root 300 2011-04-27 15:40 libsocketcan.pc
> [morinaga@localhost ~]$
>
>
>> First build the canutils, then configure the bitrate, e.g. 250 kbit/s:
>> $ canconfig can0 bitrate 250000
>> $ ifconfig can0 up
> The above commands failed.
>
> [root@localhost can]#
> [root@localhost can]# canconfig can0 bitrate 250000
> opening CAN interface 'can0' in sysfs failed, maybe not a CAN interface
> No such file or directory
you have to use canutils 4.x, not 3.x. (or ip from iprout2) to setup the
bitrate.
cheers, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
[-- Attachment #2: Type: text/plain, Size: 188 bytes --]
_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core
^ permalink raw reply
* [PATCH] net/bonding: adjust codingstyle for bond_3ad files
From: Rafael Aquini @ 2011-05-07 1:27 UTC (permalink / raw)
To: kernel-janitors
Cc: David Miller, Joe Perches, Jay Vosburgh, Andy Gospodarek,
shemminger, netdev, Nicolas Kaiser
Howdy,
While I was studying what bond_3ad has under its hood, I realized its coding
style did not follow all Documentation/CodingStyle recommendations. As a tiny
collaboration I did some mods there, in an attempt to make that code stick as
closely as possible with Kernel's coding style. Also, Nicolas Kaiser has kindly
suggested some conditional simplifications integrated in this patch.
Modifications:
* switched all comments from C99-style to C89-style.
* replaced MAC_ADDRESS_COMPARE macro for compare_ether_addr()
* simplify conditionals:
(a || (!a && !b)) => (a || !b)
(!(!a && b)) => (a || !b)
Signed-off-by: Rafael Aquini <aquini@linux.com>
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
---
drivers/net/bonding/bond_3ad.c | 837 +++++++++++++++++++++++-----------------
drivers/net/bonding/bond_3ad.h | 195 +++++-----
2 files changed, 578 insertions(+), 454 deletions(-)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 31912f1..8ac81bd 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -34,14 +34,14 @@
#include "bonding.h"
#include "bond_3ad.h"
-// General definitions
+/* General definitions */
#define AD_SHORT_TIMEOUT 1
#define AD_LONG_TIMEOUT 0
#define AD_STANDBY 0x2
#define AD_MAX_TX_IN_SECOND 3
#define AD_COLLECTOR_MAX_DELAY 0
-// Timer definitions(43.4.4 in the 802.3ad standard)
+/* Timer definitions (43.4.4 in the 802.3ad standard) */
#define AD_FAST_PERIODIC_TIME 1
#define AD_SLOW_PERIODIC_TIME 30
#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME)
@@ -49,7 +49,7 @@
#define AD_CHURN_DETECTION_TIME 60
#define AD_AGGREGATE_WAIT_TIME 2
-// Port state definitions(43.4.2.2 in the 802.3ad standard)
+/* Port state definitions (43.4.2.2 in the 802.3ad standard) */
#define AD_STATE_LACP_ACTIVITY 0x1
#define AD_STATE_LACP_TIMEOUT 0x2
#define AD_STATE_AGGREGATION 0x4
@@ -59,7 +59,9 @@
#define AD_STATE_DEFAULTED 0x40
#define AD_STATE_EXPIRED 0x80
-// Port Variables definitions used by the State Machines(43.4.7 in the 802.3ad standard)
+/* Port Variables definitions used by the State Machines
+ * (43.4.7 in the 802.3ad standard)
+ */
#define AD_PORT_BEGIN 0x1
#define AD_PORT_LACP_ENABLED 0x2
#define AD_PORT_ACTOR_CHURN 0x4
@@ -71,27 +73,23 @@
#define AD_PORT_SELECTED 0x100
#define AD_PORT_MOVED 0x200
-// Port Key definitions
-// key is determined according to the link speed, duplex and
-// user key(which is yet not supported)
-// ------------------------------------------------------------
-// Port key : | User key | Speed |Duplex|
-// ------------------------------------------------------------
-// 16 6 1 0
+/* Port Key definitions:
+ * key is determined according to the link speed, duplex and
+ * user key (which is yet not supported)
+ * ------------------------------------------------------------
+ * Port key: | User key | Speed |Duplex|
+ * ------------------------------------------------------------
+ * 16 6 1 0
+ */
#define AD_DUPLEX_KEY_BITS 0x1
#define AD_SPEED_KEY_BITS 0x3E
#define AD_USER_KEY_BITS 0xFFC0
-//dalloun
#define AD_LINK_SPEED_BITMASK_1MBPS 0x1
#define AD_LINK_SPEED_BITMASK_10MBPS 0x2
#define AD_LINK_SPEED_BITMASK_100MBPS 0x4
#define AD_LINK_SPEED_BITMASK_1000MBPS 0x8
#define AD_LINK_SPEED_BITMASK_10000MBPS 0x10
-//endalloun
-
-// compare MAC addresses
-#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } };
static u16 ad_ticks_per_sec;
@@ -99,7 +97,7 @@ static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
static const u8 lacpdu_mcast_addr[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
-// ================= main 802.3ad protocol functions ==================
+/* ================= main 802.3ad protocol functions ================== */
static int ad_lacpdu_send(struct port *port);
static int ad_marker_send(struct port *port, struct bond_marker *marker);
static void ad_mux_machine(struct port *port);
@@ -113,14 +111,12 @@ static void ad_initialize_agg(struct aggregator *aggregator);
static void ad_initialize_port(struct port *port, int lacp_fast);
static void ad_enable_collecting_distributing(struct port *port);
static void ad_disable_collecting_distributing(struct port *port);
-static void ad_marker_info_received(struct bond_marker *marker_info, struct port *port);
-static void ad_marker_response_received(struct bond_marker *marker, struct port *port);
-
-
-/////////////////////////////////////////////////////////////////////////////////
-// ================= api to bonding and kernel code ==================
-/////////////////////////////////////////////////////////////////////////////////
+static void ad_marker_info_received(struct bond_marker *marker_info,
+ struct port *port);
+static void ad_marker_response_received(struct bond_marker *marker,
+ struct port *port);
+/* ================= api to bonding and kernel code ================== */
/**
* __get_bond_by_port - get the port's bonding struct
* @port: the port we're looking at
@@ -161,7 +157,7 @@ static inline struct port *__get_next_port(struct port *port)
struct bonding *bond = __get_bond_by_port(port);
struct slave *slave = port->slave;
- // If there's no bond for this port, or this is the last slave
+ /* If there's no bond for this port, or this is the last slave */
if ((bond == NULL) || (slave->next == bond->first_slave))
return NULL;
@@ -179,7 +175,7 @@ static inline struct aggregator *__get_first_agg(struct port *port)
{
struct bonding *bond = __get_bond_by_port(port);
- // If there's no bond for this port, or bond has no slaves
+ /* If there's no bond for this port, or bond has no slaves */
if ((bond == NULL) || (bond->slave_cnt == 0))
return NULL;
@@ -198,7 +194,7 @@ static inline struct aggregator *__get_next_agg(struct aggregator *aggregator)
struct slave *slave = aggregator->slave;
struct bonding *bond = bond_get_bond_by_slave(slave);
- // If there's no bond for this aggregator, or this is the last slave
+ /* If there's no bond for this aggregator, or this is the last slave */
if ((bond == NULL) || (slave->next == bond->first_slave))
return NULL;
@@ -316,10 +312,9 @@ static u16 __get_link_speed(struct port *port)
struct slave *slave = port->slave;
u16 speed;
- /* this if covers only a special case: when the configuration starts with
- * link down, it sets the speed to 0.
- * This is done in spite of the fact that the e100 driver reports 0 to be
- * compatible with MVT in the future.*/
+ /* handling a special case:
+ * when the configuration starts with link down, it sets the speed to 0
+ */
if (slave->link != BOND_LINK_UP)
speed = 0;
else {
@@ -341,7 +336,8 @@ static u16 __get_link_speed(struct port *port)
break;
default:
- speed = 0; // unknown speed value from ethtool. shouldn't happen
+ /* unknown speed value from ethtool. shouldn't happen */
+ speed = 0;
break;
}
}
@@ -365,8 +361,9 @@ static u8 __get_duplex(struct port *port)
u8 retval;
- // handling a special case: when the configuration starts with
- // link down, it sets the duplex to 0.
+ /* handling a special case:
+ * when the configuration starts with link down, it sets the duplex to 0
+ */
if (slave->link != BOND_LINK_UP)
retval = 0x0;
else {
@@ -394,12 +391,10 @@ static u8 __get_duplex(struct port *port)
*/
static inline void __initialize_port_locks(struct port *port)
{
- // make sure it isn't called twice
+ /* make sure it isn't called twice */
spin_lock_init(&(SLAVE_AD_INFO(port->slave).state_machine_lock));
}
-//conversions
-
/**
* __ad_timer_to_ticks - convert a given timer type to AD module ticks
* @timer_type: which timer to operate
@@ -411,36 +406,32 @@ static inline void __initialize_port_locks(struct port *port)
*/
static u16 __ad_timer_to_ticks(u16 timer_type, u16 par)
{
- u16 retval = 0; /* to silence the compiler */
+ u16 retval = 0;
switch (timer_type) {
- case AD_CURRENT_WHILE_TIMER: // for rx machine usage
+ case AD_CURRENT_WHILE_TIMER: /* for rx machine usage */
if (par)
- retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); // short timeout
+ retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec);
else
- retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); // long timeout
+ retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec);
break;
- case AD_ACTOR_CHURN_TIMER: // for local churn machine
+ case AD_ACTOR_CHURN_TIMER: /* for local churn machine */
retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
break;
- case AD_PERIODIC_TIMER: // for periodic machine
- retval = (par*ad_ticks_per_sec); // long timeout
+ case AD_PERIODIC_TIMER: /* for periodic machine */
+ retval = (par*ad_ticks_per_sec);
break;
- case AD_PARTNER_CHURN_TIMER: // for remote churn machine
+ case AD_PARTNER_CHURN_TIMER: /* for remote churn machine */
retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
break;
- case AD_WAIT_WHILE_TIMER: // for selection machine
+ case AD_WAIT_WHILE_TIMER: /* for selection machine */
retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec);
break;
}
return retval;
}
-
-/////////////////////////////////////////////////////////////////////////////////
-// ================= ad_rx_machine helper functions ==================
-/////////////////////////////////////////////////////////////////////////////////
-
+/* ================= ad_rx_machine helper functions ================== */
/**
* __choose_matched - update a port's matched variable from a received lacpdu
* @lacpdu: the lacpdu we've received
@@ -466,17 +457,17 @@ static u16 __ad_timer_to_ticks(u16 timer_type, u16 par)
*/
static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
{
- // check if all parameters are alike
+ /* check if all parameters are alike */
if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
(ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
- !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
+ !compare_ether_addr((const u8 *)&(lacpdu->partner_system), (const u8 *)&(port->actor_system)) &&
(ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
(ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
- // or this is individual link(aggregation == FALSE)
+ /* or this is individual link(aggregation == FALSE) */
((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0)
) {
- // update the state machine Matched variable
+ /* update the state machine Matched variable */
port->sm_vars |= AD_PORT_MATCHED;
} else {
port->sm_vars &= ~AD_PORT_MATCHED;
@@ -498,7 +489,7 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
struct port_params *partner = &port->partner_oper;
__choose_matched(lacpdu, port);
- // record the new parameter values for the partner operational
+ /* record the new values for the operational partner */
partner->port_number = ntohs(lacpdu->actor_port);
partner->port_priority = ntohs(lacpdu->actor_port_priority);
partner->system = lacpdu->actor_system;
@@ -506,12 +497,14 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
partner->key = ntohs(lacpdu->actor_key);
partner->port_state = lacpdu->actor_state;
- // set actor_oper_port_state.defaulted to FALSE
+ /* set actor_oper_port_state.defaulted to FALSE */
port->actor_oper_port_state &= ~AD_STATE_DEFAULTED;
- // set the partner sync. to on if the partner is sync. and the port is matched
- if ((port->sm_vars & AD_PORT_MATCHED)
- && (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION))
+ /* set the partner sync to on if the partner is sync
+ * and the port is matched.
+ */
+ if ((port->sm_vars & AD_PORT_MATCHED) &&
+ (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION))
partner->port_state |= AD_STATE_SYNCHRONIZATION;
else
partner->port_state &= ~AD_STATE_SYNCHRONIZATION;
@@ -529,11 +522,8 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
static void __record_default(struct port *port)
{
if (port) {
- // record the partner admin parameters
memcpy(&port->partner_oper, &port->partner_admin,
sizeof(struct port_params));
-
- // set actor_oper_port_state.defaulted to true
port->actor_oper_port_state |= AD_STATE_DEFAULTED;
}
}
@@ -556,14 +546,14 @@ static void __update_selected(struct lacpdu *lacpdu, struct port *port)
if (lacpdu && port) {
const struct port_params *partner = &port->partner_oper;
- // check if any parameter is different
+ /* check if any parameter is different */
if (ntohs(lacpdu->actor_port) != partner->port_number ||
ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
- MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system) ||
+ compare_ether_addr((const u8 *)&lacpdu->actor_system, (const u8 *)&partner->system) ||
ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
ntohs(lacpdu->actor_key) != partner->key ||
(lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
- // update the state machine Selected variable
+ /* update the state machine Selected variable */
port->sm_vars &= ~AD_PORT_SELECTED;
}
}
@@ -587,15 +577,15 @@ static void __update_default_selected(struct port *port)
const struct port_params *admin = &port->partner_admin;
const struct port_params *oper = &port->partner_oper;
- // check if any parameter is different
if (admin->port_number != oper->port_number ||
admin->port_priority != oper->port_priority ||
- MAC_ADDRESS_COMPARE(&admin->system, &oper->system) ||
+ compare_ether_addr((const u8 *)&admin->system,
+ (const u8 *)&oper->system) ||
admin->system_priority != oper->system_priority ||
admin->key != oper->key ||
(admin->port_state & AD_STATE_AGGREGATION)
!= (oper->port_state & AD_STATE_AGGREGATION)) {
- // update the state machine Selected variable
+ /* update the state machine Selected variable */
port->sm_vars &= ~AD_PORT_SELECTED;
}
}
@@ -615,12 +605,12 @@ static void __update_default_selected(struct port *port)
*/
static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
{
- // validate lacpdu and port
+ /* validate lacpdu and port */
if (lacpdu && port) {
- // check if any parameter is different
+ /* check if any parameter is different */
if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
(ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
- MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) ||
+ compare_ether_addr((const u8 *)&(lacpdu->partner_system), (const u8 *)&(port->actor_system)) ||
(ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
(ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
@@ -628,7 +618,7 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) ||
((lacpdu->partner_state & AD_STATE_AGGREGATION) != (port->actor_oper_port_state & AD_STATE_AGGREGATION))
) {
-
+ /* set port ntt */
port->ntt = true;
}
}
@@ -644,9 +634,7 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
*/
static void __attach_bond_to_agg(struct port *port)
{
- port = NULL; /* just to satisfy the compiler */
- // This function does nothing since the parser/multiplexer of the receive
- // and the parser/multiplexer of the aggregator are already combined
+ port = NULL;
}
/**
@@ -659,9 +647,7 @@ static void __attach_bond_to_agg(struct port *port)
*/
static void __detach_bond_from_agg(struct port *port)
{
- port = NULL; /* just to satisfy the compiler */
- // This function does nothing sience the parser/multiplexer of the receive
- // and the parser/multiplexer of the aggregator are already combined
+ port = NULL;
}
/**
@@ -675,7 +661,9 @@ static int __agg_ports_are_ready(struct aggregator *aggregator)
int retval = 1;
if (aggregator) {
- // scan all ports in this aggregator to verfy if they are all ready
+ /* scan all ports in this aggregator
+ * to verify if they are all ready.
+ */
for (port = aggregator->lag_ports;
port;
port = port->next_port_in_aggregator) {
@@ -737,7 +725,7 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator)
bandwidth = aggregator->num_of_ports * 10000;
break;
default:
- bandwidth = 0; /*to silence the compiler ....*/
+ bandwidth = 0;
}
}
return bandwidth;
@@ -809,10 +797,7 @@ static inline void __update_lacpdu_from_port(struct port *port)
*/
}
-//////////////////////////////////////////////////////////////////////////////////////
-// ================= main 802.3ad protocol code ======================================
-//////////////////////////////////////////////////////////////////////////////////////
-
+/* ================= main 802.3ad protocol code ================= */
/**
* ad_lacpdu_send - send out a lacpdu packet on a given port
* @port: the port we're looking at
@@ -841,11 +826,12 @@ static int ad_lacpdu_send(struct port *port)
memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
/* Note: source address is set to be the member's PERMANENT address,
- because we use it to identify loopback lacpdus in receive. */
+ * because we use it to identify loopback lacpdus in receive.
+ */
memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
- lacpdu_header->lacpdu = port->lacpdu; // struct copy
+ lacpdu_header->lacpdu = port->lacpdu;
dev_queue_xmit(skb);
@@ -886,7 +872,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
- marker_header->marker = *marker; // struct copy
+ marker_header->marker = *marker;
dev_queue_xmit(skb);
@@ -902,80 +888,101 @@ static void ad_mux_machine(struct port *port)
{
mux_states_t last_state;
- // keep current State Machine state to compare later if it was changed
last_state = port->sm_mux_state;
if (port->sm_vars & AD_PORT_BEGIN) {
- port->sm_mux_state = AD_MUX_DETACHED; // next state
+ port->sm_mux_state = AD_MUX_DETACHED;
} else {
switch (port->sm_mux_state) {
case AD_MUX_DETACHED:
- if ((port->sm_vars & AD_PORT_SELECTED)
- || (port->sm_vars & AD_PORT_STANDBY))
+ if ((port->sm_vars & AD_PORT_SELECTED) ||
+ (port->sm_vars & AD_PORT_STANDBY))
/* if SELECTED or STANDBY */
- port->sm_mux_state = AD_MUX_WAITING; // next state
+ port->sm_mux_state = AD_MUX_WAITING;
break;
case AD_MUX_WAITING:
- // if SELECTED == FALSE return to DETACH state
- if (!(port->sm_vars & AD_PORT_SELECTED)) { // if UNSELECTED
+ /* if SELECTED == FALSE return to DETACH state */
+ if (!(port->sm_vars & AD_PORT_SELECTED)) {
port->sm_vars &= ~AD_PORT_READY_N;
- // in order to withhold the Selection Logic to check all ports READY_N value
- // every callback cycle to update ready variable, we check READY_N and update READY here
- __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
- port->sm_mux_state = AD_MUX_DETACHED; // next state
+ /* in order to withhold the Selection Logic
+ * to check all ports READY_N value at every
+ * callback cycle to update ready variable,
+ * we check READY_N and update READY here
+ */
+ __set_agg_ports_ready(port->aggregator,
+ __agg_ports_are_ready(port->aggregator));
+ port->sm_mux_state = AD_MUX_DETACHED;
break;
}
- // check if the wait_while_timer expired
- if (port->sm_mux_timer_counter
- && !(--port->sm_mux_timer_counter))
+ /* check if the wait_while_timer expired */
+ if (port->sm_mux_timer_counter &&
+ !(--port->sm_mux_timer_counter))
port->sm_vars |= AD_PORT_READY_N;
- // in order to withhold the selection logic to check all ports READY_N value
- // every callback cycle to update ready variable, we check READY_N and update READY here
- __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
-
- // if the wait_while_timer expired, and the port is in READY state, move to ATTACHED state
- if ((port->sm_vars & AD_PORT_READY)
- && !port->sm_mux_timer_counter)
- port->sm_mux_state = AD_MUX_ATTACHED; // next state
+ /* in order to withhold the selection logic
+ * to check all ports READY_N value at every
+ * callback cycle to update ready variable,
+ * we check READY_N and update READY here
+ */
+ __set_agg_ports_ready(port->aggregator,
+ __agg_ports_are_ready(port->aggregator));
+
+ /* if the wait_while_timer expired, and the port
+ * is in READY state, move to ATTACHED state
+ */
+ if ((port->sm_vars & AD_PORT_READY) &&
+ !port->sm_mux_timer_counter)
+ port->sm_mux_state = AD_MUX_ATTACHED;
break;
case AD_MUX_ATTACHED:
- // check also if agg_select_timer expired(so the edable port will take place only after this timer)
- if ((port->sm_vars & AD_PORT_SELECTED) && (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) && !__check_agg_selection_timer(port)) {
- port->sm_mux_state = AD_MUX_COLLECTING_DISTRIBUTING;// next state
- } else if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if UNSELECTED or STANDBY
+ /* check also if agg_select_timer expired
+ * so the enable port will take place
+ * only after this timer
+ */
+ if ((port->sm_vars & AD_PORT_SELECTED) &&
+ (port->partner_oper.port_state &
+ AD_STATE_SYNCHRONIZATION) &&
+ !__check_agg_selection_timer(port)) {
+ port->sm_mux_state =
+ AD_MUX_COLLECTING_DISTRIBUTING;
+ } else if (!(port->sm_vars & AD_PORT_SELECTED) ||
+ (port->sm_vars & AD_PORT_STANDBY)) {
+ /* if UNSELECTED or STANDBY */
port->sm_vars &= ~AD_PORT_READY_N;
- // in order to withhold the selection logic to check all ports READY_N value
- // every callback cycle to update ready variable, we check READY_N and update READY here
- __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
- port->sm_mux_state = AD_MUX_DETACHED;// next state
+ /* in order to withhold the Selection Logic
+ * to check all ports READY_N value at every
+ * callback cycle to update ready variable,
+ * we check READY_N and update READY here
+ */
+ __set_agg_ports_ready(port->aggregator,
+ __agg_ports_are_ready(port->aggregator));
+ port->sm_mux_state = AD_MUX_DETACHED;
}
break;
case AD_MUX_COLLECTING_DISTRIBUTING:
- if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY) ||
- !(port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION)
- ) {
- port->sm_mux_state = AD_MUX_ATTACHED;// next state
-
+ if (!(port->sm_vars & AD_PORT_SELECTED) ||
+ (port->sm_vars & AD_PORT_STANDBY) ||
+ !(port->partner_oper.port_state &
+ AD_STATE_SYNCHRONIZATION)) {
+ port->sm_mux_state = AD_MUX_ATTACHED;
} else {
- // if port state hasn't changed make
- // sure that a collecting distributing
- // port in an active aggregator is enabled
+ /* if port state hasn't changed make
+ * sure that a collecting distributing
+ * port in an active aggregator is enabled
+ */
if (port->aggregator &&
port->aggregator->is_active &&
- !__port_is_enabled(port)) {
-
+ !__port_is_enabled(port))
__enable_port(port);
- }
}
break;
- default: //to silence the compiler
+ default:
break;
}
}
- // check if the state machine was changed
+ /* check if the state machine was changed */
if (port->sm_mux_state != last_state) {
pr_debug("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n",
port->actor_port_number, last_state,
@@ -983,14 +990,16 @@ static void ad_mux_machine(struct port *port)
switch (port->sm_mux_state) {
case AD_MUX_DETACHED:
__detach_bond_from_agg(port);
- port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
+ port->actor_oper_port_state &=
+ ~AD_STATE_SYNCHRONIZATION;
ad_disable_collecting_distributing(port);
port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
port->ntt = true;
break;
case AD_MUX_WAITING:
- port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0);
+ port->sm_mux_timer_counter =
+ __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0);
break;
case AD_MUX_ATTACHED:
__attach_bond_to_agg(port);
@@ -1006,7 +1015,7 @@ static void ad_mux_machine(struct port *port)
ad_enable_collecting_distributing(port);
port->ntt = true;
break;
- default: //to silence the compiler
+ default:
break;
}
}
@@ -1025,59 +1034,62 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
{
rx_states_t last_state;
- // keep current State Machine state to compare later if it was changed
last_state = port->sm_rx_state;
- // check if state machine should change state
- // first, check if port was reinitialized
+ /* check if state machine should change state
+ * first, check if port was reinitialized
+ */
if (port->sm_vars & AD_PORT_BEGIN)
/* next state */
port->sm_rx_state = AD_RX_INITIALIZE;
- // check if port is not enabled
- else if (!(port->sm_vars & AD_PORT_BEGIN)
- && !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED))
+ /* check if port is not enabled */
+ else if (!(port->sm_vars & AD_PORT_BEGIN) &&
+ !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED))
/* next state */
port->sm_rx_state = AD_RX_PORT_DISABLED;
- // check if new lacpdu arrived
- else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || (port->sm_rx_state == AD_RX_DEFAULTED) || (port->sm_rx_state == AD_RX_CURRENT))) {
- port->sm_rx_timer_counter = 0; // zero timer
+ /* check if new lacpdu arrived */
+ else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) ||
+ (port->sm_rx_state == AD_RX_DEFAULTED) ||
+ (port->sm_rx_state == AD_RX_CURRENT))) {
+ port->sm_rx_timer_counter = 0; /* zero timer */
port->sm_rx_state = AD_RX_CURRENT;
} else {
- // if timer is on, and if it is expired
- if (port->sm_rx_timer_counter && !(--port->sm_rx_timer_counter)) {
+ /* if timer is on, and if it is expired */
+ if (port->sm_rx_timer_counter &&
+ !(--port->sm_rx_timer_counter)) {
switch (port->sm_rx_state) {
case AD_RX_EXPIRED:
- port->sm_rx_state = AD_RX_DEFAULTED; // next state
+ port->sm_rx_state = AD_RX_DEFAULTED;
break;
case AD_RX_CURRENT:
- port->sm_rx_state = AD_RX_EXPIRED; // next state
+ port->sm_rx_state = AD_RX_EXPIRED;
break;
- default: //to silence the compiler
+ default:
break;
}
} else {
- // if no lacpdu arrived and no timer is on
+ /* if no lacpdu arrived and no timer is on */
switch (port->sm_rx_state) {
case AD_RX_PORT_DISABLED:
if (port->sm_vars & AD_PORT_MOVED)
- port->sm_rx_state = AD_RX_INITIALIZE; // next state
- else if (port->is_enabled
- && (port->sm_vars
- & AD_PORT_LACP_ENABLED))
- port->sm_rx_state = AD_RX_EXPIRED; // next state
- else if (port->is_enabled
- && ((port->sm_vars
- & AD_PORT_LACP_ENABLED) == 0))
- port->sm_rx_state = AD_RX_LACP_DISABLED; // next state
+ port->sm_rx_state = AD_RX_INITIALIZE;
+ else if (port->is_enabled &&
+ (port->sm_vars &
+ AD_PORT_LACP_ENABLED))
+ port->sm_rx_state = AD_RX_EXPIRED;
+ else if (port->is_enabled &&
+ ((port->sm_vars &
+ AD_PORT_LACP_ENABLED) == 0))
+ port->sm_rx_state = AD_RX_LACP_DISABLED;
break;
- default: //to silence the compiler
+ default:
break;
}
}
}
- // check if the State machine was changed or new lacpdu arrived
+ /* check if the State machine was changed or new lacpdu arrived */
if ((port->sm_rx_state != last_state) || (lacpdu)) {
pr_debug("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n",
port->actor_port_number, last_state,
@@ -1092,7 +1104,7 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
__record_default(port);
port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
port->sm_vars &= ~AD_PORT_MOVED;
- port->sm_rx_state = AD_RX_PORT_DISABLED; // next state
+ port->sm_rx_state = AD_RX_PORT_DISABLED;
/*- Fall Through -*/
@@ -1107,14 +1119,20 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
break;
case AD_RX_EXPIRED:
- //Reset of the Synchronization flag. (Standard 43.4.12)
- //This reset cause to disable this port in the COLLECTING_DISTRIBUTING state of the
- //mux machine in case of EXPIRED even if LINK_DOWN didn't arrive for the port.
- port->partner_oper.port_state &= ~AD_STATE_SYNCHRONIZATION;
+ /* Reset of the Synchronization flag. (Standard 43.4.12)
+ * This reset cause to disable this port in the
+ * COLLECTING_DISTRIBUTING state of the mux machine
+ * in case of EXPIRED even if LINK_DOWN didn't arrive
+ * for the port.
+ */
+ port->partner_oper.port_state &=
+ ~AD_STATE_SYNCHRONIZATION;
port->sm_vars &= ~AD_PORT_MATCHED;
port->partner_oper.port_state |=
AD_STATE_LACP_ACTIVITY;
- port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT));
+ port->sm_rx_timer_counter =
+ __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER,
+ (u16)(AD_SHORT_TIMEOUT));
port->actor_oper_port_state |= AD_STATE_EXPIRED;
break;
case AD_RX_DEFAULTED:
@@ -1124,12 +1142,13 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
break;
case AD_RX_CURRENT:
- // detect loopback situation
- if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
- // INFO_RECEIVED_LOOPBACK_FRAMES
+ /* detect loopback situation */
+ if (!compare_ether_addr((const u8 *)&(lacpdu->actor_system), (const u8 *)&(port->actor_system))) {
+ /* INFO_RECEIVED_LOOPBACK_FRAMES */
pr_err("%s: An illegal loopback occurred on adapter (%s).\n"
"Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
- port->slave->dev->master->name, port->slave->dev->name);
+ port->slave->dev->master->name,
+ port->slave->dev->name);
return;
}
__update_selected(lacpdu, port);
@@ -1137,15 +1156,19 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
__record_pdu(lacpdu, port);
port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT));
port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
- // verify that if the aggregator is enabled, the port is enabled too.
- //(because if the link goes down for a short time, the 802.3ad will not
- // catch it, and the port will continue to be disabled)
+
+ /* verify that if the aggregator is enabled,
+ * so the port is enabled too.
+ * because if the link goes down for a short time,
+ * the 802.3ad will not catch it,
+ * and the port will continue to be disabled
+ */
if (port->aggregator
&& port->aggregator->is_active
&& !__port_is_enabled(port))
__enable_port(port);
break;
- default: //to silence the compiler
+ default:
break;
}
}
@@ -1158,9 +1181,11 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
*/
static void ad_tx_machine(struct port *port)
{
- // check if tx timer expired, to verify that we do not send more than 3 packets per second
+ /* check if tx timer has expired,
+ * to verify that we do not send more than 3 packets per second
+ */
if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) {
- // check if there is something to send
+ /* check if there is something to send */
if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) {
__update_lacpdu_from_port(port);
@@ -1168,14 +1193,17 @@ static void ad_tx_machine(struct port *port)
pr_debug("Sent LACPDU on port %d\n",
port->actor_port_number);
- /* mark ntt as false, so it will not be sent again until
- demanded */
+ /* mark ntt as false,
+ * so it won't be sent again until demanded
+ */
port->ntt = false;
}
}
- // restart tx timer(to verify that we will not exceed AD_MAX_TX_IN_SECOND
+ /* restart tx timer
+ * to verify that we won't exceed AD_MAX_TX_IN_SECOND
+ */
port->sm_tx_timer_counter =
- ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
+ ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
}
}
@@ -1189,76 +1217,87 @@ static void ad_periodic_machine(struct port *port)
{
periodic_states_t last_state;
- // keep current state machine state to compare later if it was changed
+ /* keep current state machine state to compare later if it was changed*/
last_state = port->sm_periodic_state;
- // check if port was reinitialized
- if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) ||
- (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & AD_STATE_LACP_ACTIVITY))
- ) {
- port->sm_periodic_state = AD_NO_PERIODIC; // next state
+ /* check if port was reinitialized */
+ if (((port->sm_vars & AD_PORT_BEGIN) ||
+ !(port->sm_vars & AD_PORT_LACP_ENABLED) ||
+ !port->is_enabled) ||
+ (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) &&
+ !(port->partner_oper.port_state & AD_STATE_LACP_ACTIVITY))) {
+ port->sm_periodic_state = AD_NO_PERIODIC; /* next state */
}
- // check if state machine should change state
+ /* check if state machine should change state */
else if (port->sm_periodic_timer_counter) {
- // check if periodic state machine expired
+ /* check if periodic state machine expired */
if (!(--port->sm_periodic_timer_counter)) {
- // if expired then do tx
- port->sm_periodic_state = AD_PERIODIC_TX; // next state
+ /* if expired then do tx, next state */
+ port->sm_periodic_state = AD_PERIODIC_TX;
} else {
- // If not expired, check if there is some new timeout parameter from the partner state
+ /* If not expired, check if there is some
+ * new timeout parameter from the partner state
+ */
switch (port->sm_periodic_state) {
case AD_FAST_PERIODIC:
if (!(port->partner_oper.port_state
& AD_STATE_LACP_TIMEOUT))
- port->sm_periodic_state = AD_SLOW_PERIODIC; // next state
+ port->sm_periodic_state = AD_SLOW_PERIODIC;
break;
case AD_SLOW_PERIODIC:
- if ((port->partner_oper.port_state & AD_STATE_LACP_TIMEOUT)) {
- // stop current timer
+ if ((port->partner_oper.port_state &
+ AD_STATE_LACP_TIMEOUT)) {
+ /* stop current timer */
port->sm_periodic_timer_counter = 0;
- port->sm_periodic_state = AD_PERIODIC_TX; // next state
+ port->sm_periodic_state = AD_PERIODIC_TX;
}
break;
- default: //to silence the compiler
+ default:
break;
}
}
} else {
switch (port->sm_periodic_state) {
case AD_NO_PERIODIC:
- port->sm_periodic_state = AD_FAST_PERIODIC; // next state
+ port->sm_periodic_state = AD_FAST_PERIODIC;
break;
case AD_PERIODIC_TX:
- if (!(port->partner_oper.port_state
- & AD_STATE_LACP_TIMEOUT))
- port->sm_periodic_state = AD_SLOW_PERIODIC; // next state
+ if (!(port->partner_oper.port_state &
+ AD_STATE_LACP_TIMEOUT))
+ port->sm_periodic_state = AD_SLOW_PERIODIC;
else
- port->sm_periodic_state = AD_FAST_PERIODIC; // next state
+ port->sm_periodic_state = AD_FAST_PERIODIC;
break;
- default: //to silence the compiler
+ default:
break;
}
}
- // check if the state machine was changed
+ /* check if the state machine was changed */
if (port->sm_periodic_state != last_state) {
pr_debug("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n",
port->actor_port_number, last_state,
port->sm_periodic_state);
switch (port->sm_periodic_state) {
case AD_NO_PERIODIC:
- port->sm_periodic_timer_counter = 0; // zero timer
+ port->sm_periodic_timer_counter = 0;
break;
case AD_FAST_PERIODIC:
- port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle
+ /* decrement 1 tick we lost in PERIODIC_TX cycle */
+ port->sm_periodic_timer_counter =
+ __ad_timer_to_ticks(AD_PERIODIC_TIMER,
+ (u16)(AD_FAST_PERIODIC_TIME))-1;
break;
case AD_SLOW_PERIODIC:
- port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle
+ /* decrement 1 tick we lost in PERIODIC_TX cycle */
+ port->sm_periodic_timer_counter =
+ __ad_timer_to_ticks(AD_PERIODIC_TIMER,
+ (u16)(AD_SLOW_PERIODIC_TIME))-1;
break;
case AD_PERIODIC_TX:
port->ntt = true;
break;
- default: //to silence the compiler
+ default:
break;
}
}
@@ -1274,46 +1313,58 @@ static void ad_periodic_machine(struct port *port)
*/
static void ad_port_selection_logic(struct port *port)
{
- struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator;
+ struct aggregator *aggregator, *temp_aggregator;
+ struct aggregator *free_aggregator = NULL;
struct port *last_port = NULL, *curr_port;
int found = 0;
- // if the port is already Selected, do nothing
+ /* if the port is already Selected, do nothing */
if (port->sm_vars & AD_PORT_SELECTED)
return;
- // if the port is connected to other aggregator, detach it
+ /* if the port is connected to other aggregator, detach it */
if (port->aggregator) {
- // detach the port from its former aggregator
+ /* detach the port from its former aggregator */
temp_aggregator = port->aggregator;
for (curr_port = temp_aggregator->lag_ports; curr_port;
last_port = curr_port,
curr_port = curr_port->next_port_in_aggregator) {
if (curr_port == port) {
temp_aggregator->num_of_ports--;
- if (!last_port) {// if it is the first port attached to the aggregator
+ if (!last_port) {
+ /* if it is the first port attached
+ to the aggregator */
temp_aggregator->lag_ports =
port->next_port_in_aggregator;
- } else {// not the first port attached to the aggregator
+ } else {
+ /* not the first port attached
+ to the aggregator */
last_port->next_port_in_aggregator =
port->next_port_in_aggregator;
}
- // clear the port's relations to this aggregator
+ /* clear the port's relations
+ to this aggregator */
port->aggregator = NULL;
port->next_port_in_aggregator = NULL;
port->actor_port_aggregator_identifier = 0;
pr_debug("Port %d left LAG %d\n",
- port->actor_port_number,
- temp_aggregator->aggregator_identifier);
- // if the aggregator is empty, clear its parameters, and set it ready to be attached
+ port->actor_port_number,
+ temp_aggregator->aggregator_identifier);
+ /* if the aggregator is empty,
+ * clear its parameters, and set it ready
+ * to be attached
+ */
if (!temp_aggregator->lag_ports)
ad_clear_agg(temp_aggregator);
break;
}
}
- if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
+ if (!curr_port) {
+ /* meaning: the port was related to an aggregator
+ * but was not on the aggregator port list.
+ */
pr_warning("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n",
port->slave->dev->master->name,
port->actor_port_number,
@@ -1321,27 +1372,34 @@ static void ad_port_selection_logic(struct port *port)
port->aggregator->aggregator_identifier);
}
}
- // search on all aggregators for a suitable aggregator for this port
+ /* search on all aggregators for a suitable aggregator for this port */
for (aggregator = __get_first_agg(port); aggregator;
aggregator = __get_next_agg(aggregator)) {
- // keep a free aggregator for later use(if needed)
+ /* keep a free aggregator for later use (if needed) */
if (!aggregator->lag_ports) {
if (!free_aggregator)
free_aggregator = aggregator;
continue;
}
- // check if current aggregator suits us
- if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && // if all parameters match AND
- !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper.system)) &&
+
+ /* check if current aggregator suits us
+ * a suitable aggregator must fit the following requirements,
+ * tested here:
+ * i. match all parameters;
+ * ii. has partner answers;
+ * iii. it is not individual
+ */
+ if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) &&
+ !compare_ether_addr((const u8 *)&(aggregator->partner_system), (const u8 *)&(port->partner_oper.system)) &&
(aggregator->partner_system_priority == port->partner_oper.system_priority) &&
(aggregator->partner_oper_aggregator_key == port->partner_oper.key)
) &&
- ((MAC_ADDRESS_COMPARE(&(port->partner_oper.system), &(null_mac_addr)) && // partner answers
- !aggregator->is_individual) // but is not individual OR
+ ((compare_ether_addr((const u8 *)&(port->partner_oper.system), (const u8 *)&(null_mac_addr)) &&
+ !aggregator->is_individual)
)
) {
- // attach to the founded aggregator
+ /* attach to the founded aggregator */
port->aggregator = aggregator;
port->actor_port_aggregator_identifier =
port->aggregator->aggregator_identifier;
@@ -1352,42 +1410,45 @@ static void ad_port_selection_logic(struct port *port)
port->actor_port_number,
port->aggregator->aggregator_identifier);
- // mark this port as selected
+ /* mark this port as selected */
port->sm_vars |= AD_PORT_SELECTED;
found = 1;
break;
}
}
- // the port couldn't find an aggregator - attach it to a new aggregator
+ /* the port couldn't find an aggregator, attach it to a new aggregator*/
if (!found) {
if (free_aggregator) {
- // assign port a new aggregator
+ /* assign port a new aggregator */
port->aggregator = free_aggregator;
port->actor_port_aggregator_identifier =
port->aggregator->aggregator_identifier;
- // update the new aggregator's parameters
- // if port was responsed from the end-user
+ /* update the new aggregator's parameters
+ if port was replied from the end-user */
if (port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)
/* if port is full duplex */
port->aggregator->is_individual = false;
else
port->aggregator->is_individual = true;
- port->aggregator->actor_admin_aggregator_key = port->actor_admin_port_key;
- port->aggregator->actor_oper_aggregator_key = port->actor_oper_port_key;
+ port->aggregator->actor_admin_aggregator_key =
+ port->actor_admin_port_key;
+ port->aggregator->actor_oper_aggregator_key =
+ port->actor_oper_port_key;
port->aggregator->partner_system =
- port->partner_oper.system;
+ port->partner_oper.system;
port->aggregator->partner_system_priority =
- port->partner_oper.system_priority;
- port->aggregator->partner_oper_aggregator_key = port->partner_oper.key;
+ port->partner_oper.system_priority;
+ port->aggregator->partner_oper_aggregator_key =
+ port->partner_oper.key;
port->aggregator->receive_state = 1;
port->aggregator->transmit_state = 1;
port->aggregator->lag_ports = port;
port->aggregator->num_of_ports++;
- // mark this port as selected
+ /* mark this port as selected */
port->sm_vars |= AD_PORT_SELECTED;
pr_debug("Port %d joined LAG %d(new LAG)\n",
@@ -1399,16 +1460,18 @@ static void ad_port_selection_logic(struct port *port)
port->actor_port_number, port->slave->dev->name);
}
}
- // if all aggregator's ports are READY_N == TRUE, set ready=TRUE in all aggregator's ports
- // else set ready=FALSE in all aggregator's ports
- __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
+ /* if all aggregator's ports are READY_N == TRUE,
+ * set ready=TRUE in all aggregator's ports
+ * else set ready=FALSE in all aggregator's ports
+ */
+ __set_agg_ports_ready(port->aggregator,
+ __agg_ports_are_ready(port->aggregator));
aggregator = __get_first_agg(port);
ad_agg_selection_logic(aggregator);
}
-/*
- * Decide if "agg" is a better choice for the new active aggregator that
+/* Decide if "agg" is a better choice for the new active aggregator that
* the current best, according to the ad_select policy.
*/
static struct aggregator *ad_agg_selection_test(struct aggregator *best,
@@ -1533,18 +1596,16 @@ static void ad_agg_selection_logic(struct aggregator *agg)
if (best &&
__get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) {
- /*
- * For the STABLE policy, don't replace the old active
- * aggregator if it's still active (it has an answering
- * partner) or if both the best and active don't have an
- * answering partner.
+
+ /* For the STABLE policy, don't replace the old active
+ * aggregator if it's still active (it has an answering partner)
+ * or if both the best and active don't have answering partners
*/
if (active && active->lag_ports &&
active->lag_ports->is_enabled &&
- (__agg_has_partner(active) ||
- (!__agg_has_partner(active) && !__agg_has_partner(best)))) {
- if (!(!active->actor_oper_aggregator_key &&
- best->actor_oper_aggregator_key)) {
+ (__agg_has_partner(active) || !__agg_has_partner(best))) {
+ if (active->actor_oper_aggregator_key ||
+ !best->actor_oper_aggregator_key) {
best = NULL;
active->is_active = 1;
}
@@ -1556,7 +1617,7 @@ static void ad_agg_selection_logic(struct aggregator *agg)
active->is_active = 1;
}
- // if there is new best aggregator, activate it
+ /* if there is new best aggregator, activate it */
if (best) {
pr_debug("best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
best->aggregator_identifier, best->num_of_ports,
@@ -1577,7 +1638,7 @@ static void ad_agg_selection_logic(struct aggregator *agg)
agg->is_individual, agg->is_active);
}
- // check if any partner replys
+ /* check if any partner replies */
if (best->is_individual) {
pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
best->slave ? best->slave->dev->master->name : "NULL");
@@ -1592,7 +1653,9 @@ static void ad_agg_selection_logic(struct aggregator *agg)
best->partner_oper_aggregator_key,
best->is_individual, best->is_active);
- // disable the ports that were related to the former active_aggregator
+ /* disable the ports that were related to
+ * the former active_aggregator
+ */
if (active) {
for (port = active->lag_ports; port;
port = port->next_port_in_aggregator) {
@@ -1601,8 +1664,7 @@ static void ad_agg_selection_logic(struct aggregator *agg)
}
}
- /*
- * if the selected aggregator is of join individuals
+ /* if the selected aggregator is of join individuals
* (partner_system is NULL), enable their ports
*/
active = __get_active_agg(origin);
@@ -1701,8 +1763,10 @@ static void ad_initialize_port(struct port *port, int lacp_fast)
port->ntt = false;
port->actor_admin_port_key = 1;
port->actor_oper_port_key = 1;
- port->actor_admin_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
- port->actor_oper_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
+ port->actor_admin_port_state =
+ AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
+ port->actor_oper_port_state =
+ AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
if (lacp_fast)
port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT;
@@ -1711,7 +1775,7 @@ static void ad_initialize_port(struct port *port, int lacp_fast)
memcpy(&port->partner_oper, &tmpl, sizeof(tmpl));
port->is_enabled = true;
- // ****** private parameters ******
+ /* ****** private parameters ****** */
port->sm_vars = 0x3;
port->sm_rx_state = 0;
port->sm_rx_timer_counter = 0;
@@ -1753,7 +1817,9 @@ static void ad_enable_collecting_distributing(struct port *port)
*/
static void ad_disable_collecting_distributing(struct port *port)
{
- if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
+ if (port->aggregator &&
+ compare_ether_addr((const u8 *)&(port->aggregator->partner_system),
+ (const u8 *)&(null_mac_addr))) {
pr_debug("Disabling port %d(LAG %d)\n",
port->actor_port_number,
port->aggregator->aggregator_identifier);
@@ -1775,27 +1841,28 @@ static void ad_marker_info_send(struct port *port)
struct bond_marker marker;
u16 index;
- // fill the marker PDU with the appropriate values
+ /* fill the marker PDU with the appropriate values */
marker.subtype = 0x02;
marker.version_number = 0x01;
marker.tlv_type = AD_MARKER_INFORMATION_SUBTYPE;
marker.marker_length = 0x16;
- // convert requester_port to Big Endian
- marker.requester_port = (((port->actor_port_number & 0xFF) << 8) |((u16)(port->actor_port_number & 0xFF00) >> 8));
+ /* convert requester_port to Big Endian */
+ marker.requester_port = (((port->actor_port_number & 0xFF) << 8) |
+ ((u16)(port->actor_port_number & 0xFF00) >> 8));
marker.requester_system = port->actor_system;
- // convert requester_port(u32) to Big Endian
+ /* convert requester_port(u32) to Big Endian */
marker.requester_transaction_id =
- (((++port->transaction_id & 0xFF) << 24)
- | ((port->transaction_id & 0xFF00) << 8)
- | ((port->transaction_id & 0xFF0000) >> 8)
- | ((port->transaction_id & 0xFF000000) >> 24));
+ (((++port->transaction_id & 0xFF) << 24) |
+ ((port->transaction_id & 0xFF00) << 8) |
+ ((port->transaction_id & 0xFF0000) >> 8) |
+ ((port->transaction_id & 0xFF000000) >> 24));
marker.pad = 0;
marker.tlv_type_terminator = 0x00;
marker.terminator_length = 0x00;
for (index = 0; index < 90; index++)
marker.reserved_90[index] = 0;
- // send the marker information
+ /* send the marker information */
if (ad_marker_send(port, &marker) >= 0) {
pr_debug("Sent Marker Information on port %d\n",
port->actor_port_number);
@@ -1814,12 +1881,13 @@ static void ad_marker_info_received(struct bond_marker *marker_info,
{
struct bond_marker marker;
- // copy the received marker data to the response marker
- //marker = *marker_info;
+ /* copy the received marker data to the response marker
+ * marker = *marker_info;
+ */
memcpy(&marker, marker_info, sizeof(struct bond_marker));
- // change the marker subtype to marker response
+ /* change the marker subtype to marker response */
marker.tlv_type = AD_MARKER_RESPONSE_SUBTYPE;
- // send the marker response
+ /* send the marker response */
if (ad_marker_send(port, &marker) >= 0) {
pr_debug("Sent Marker Response on port %d\n",
@@ -1839,16 +1907,13 @@ static void ad_marker_info_received(struct bond_marker *marker_info,
static void ad_marker_response_received(struct bond_marker *marker,
struct port *port)
{
- marker = NULL; /* just to satisfy the compiler */
- port = NULL; /* just to satisfy the compiler */
- // DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW
+ marker = NULL;
+ port = NULL;
}
-//////////////////////////////////////////////////////////////////////////////////////
-// ================= AD exported functions to the main bonding code ==================
-//////////////////////////////////////////////////////////////////////////////////////
+/* ============= AD exported functions to the main bonding code ============ */
-// Check aggregators status in team every T seconds
+/* Check aggregators status in team every T seconds */
#define AD_AGGREGATOR_SELECTION_TIMER 8
/*
@@ -1876,17 +1941,20 @@ static u16 aggregator_identifier;
*/
void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast)
{
- // check that the bond is not initialized yet
- if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
+ /* check that the bond is not initialized yet */
+ if (compare_ether_addr((const u8 *)&(BOND_AD_INFO(bond).system.sys_mac_addr),
bond->dev->dev_addr)) {
aggregator_identifier = 0;
BOND_AD_INFO(bond).lacp_fast = lacp_fast;
BOND_AD_INFO(bond).system.sys_priority = 0xFFFF;
- BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr);
+ BOND_AD_INFO(bond).system.sys_mac_addr =
+ *((struct mac_addr *)bond->dev->dev_addr);
- // initialize how many times this module is called in one second(should be about every 100ms)
+ /* initialize how many times this module is
+ * called in one second(should be about every 100ms)
+ */
ad_ticks_per_sec = tick_resolution;
bond_3ad_initiate_agg_selection(bond,
@@ -1914,31 +1982,37 @@ int bond_3ad_bind_slave(struct slave *slave)
return -1;
}
- //check that the slave has not been initialized yet.
+ /* check that the slave has not been initialized yet. */
if (SLAVE_AD_INFO(slave).port.slave != slave) {
- // port initialization
+ /* port initialization */
port = &(SLAVE_AD_INFO(slave).port);
ad_initialize_port(port, BOND_AD_INFO(bond).lacp_fast);
port->slave = slave;
port->actor_port_number = SLAVE_AD_INFO(slave).id;
- // key is determined according to the link speed, duplex and user key(which is yet not supported)
- // ------------------------------------------------------------
- // Port key : | User key | Speed |Duplex|
- // ------------------------------------------------------------
- // 16 6 1 0
- port->actor_admin_port_key = 0; // initialize this parameter
+ /* key is determined according to the link speed,
+ * duplex and user key(which is yet not supported)
+ * Port key:
+ * ------------------------------------------------------------
+ * | User key | Speed |Duplex|
+ * ------------------------------------------------------------
+ * 16 6 1 0
+ */
+ port->actor_admin_port_key = 0; /* initialize this parameter */
port->actor_admin_port_key |= __get_duplex(port);
port->actor_admin_port_key |= (__get_link_speed(port) << 1);
port->actor_oper_port_key = port->actor_admin_port_key;
- // if the port is not full duplex, then the port should be not lacp Enabled
+ /* if the port is not full duplex,
+ * then the port should be not lacp Enabled
+ */
if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS))
port->sm_vars &= ~AD_PORT_LACP_ENABLED;
- // actor system is the bond's system
+ /* actor system is the bond's system */
port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
- // tx timer(to verify that no more than MAX_TX_IN_SECOND lacpdu's are sent in one second)
+
+ /* certify that no more than MAX_TX_IN_SECOND lacpdu sent/sec */
port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
port->aggregator = NULL;
port->next_port_in_aggregator = NULL;
@@ -1947,12 +2021,13 @@ int bond_3ad_bind_slave(struct slave *slave)
__initialize_port_locks(port);
- // aggregator initialization
+ /* aggregator initialization */
aggregator = &(SLAVE_AD_INFO(slave).aggregator);
ad_initialize_agg(aggregator);
- aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr);
+ aggregator->aggregator_mac_address =
+ *((struct mac_addr *)bond->dev->dev_addr);
aggregator->aggregator_identifier = (++aggregator_identifier);
aggregator->slave = slave;
aggregator->is_active = 0;
@@ -1976,13 +2051,13 @@ void bond_3ad_unbind_slave(struct slave *slave)
struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
int select_new_active_agg = 0;
- // find the aggregator related to this slave
+ /* find the aggregator related to this slave */
aggregator = &(SLAVE_AD_INFO(slave).aggregator);
- // find the port related to this slave
+ /* find the port related to this slave */
port = &(SLAVE_AD_INFO(slave).port);
- // if slave is null, the whole port is not initialized
+ /* if slave is null, the whole port is not initialized */
if (!port->slave) {
pr_warning("Warning: %s: Trying to unbind an uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
@@ -1997,32 +2072,43 @@ void bond_3ad_unbind_slave(struct slave *slave)
__update_lacpdu_from_port(port);
ad_lacpdu_send(port);
- // check if this aggregator is occupied
+ /* check if this aggregator is occupied */
if (aggregator->lag_ports) {
- // check if there are other ports related to this aggregator except
- // the port related to this slave(thats ensure us that there is a
- // reason to search for new aggregator, and that we will find one
- if ((aggregator->lag_ports != port) || (aggregator->lag_ports->next_port_in_aggregator)) {
- // find new aggregator for the related port(s)
+ /* check if there are other ports related to this aggregator
+ * except the port related to this slave
+ * (it ensures us that there is a reason to search for
+ * new aggregator, and that we will find one)
+ */
+ if ((aggregator->lag_ports != port) ||
+ (aggregator->lag_ports->next_port_in_aggregator)) {
+ /* find new aggregator for the related port(s) */
new_aggregator = __get_first_agg(port);
- for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
- // if the new aggregator is empty, or it is connected to our port only
- if (!new_aggregator->lag_ports
- || ((new_aggregator->lag_ports == port)
- && !new_aggregator->lag_ports->next_port_in_aggregator))
+ for (; new_aggregator;
+ new_aggregator = __get_next_agg(new_aggregator)) {
+ /* if the new aggregator is empty,
+ or it is connected to our port only */
+ if (!new_aggregator->lag_ports ||
+ ((new_aggregator->lag_ports == port) &&
+ !new_aggregator->lag_ports->next_port_in_aggregator))
break;
}
- // if new aggregator found, copy the aggregator's parameters
- // and connect the related lag_ports to the new aggregator
- if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
- pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n",
+ /* if new aggregator found, copy the aggregator's
+ * parameters and connect the related lag_ports to the
+ * new aggregator
+ */
+ if ((new_aggregator) &&
+ ((!new_aggregator->lag_ports) ||
+ ((new_aggregator->lag_ports == port) &&
+ !new_aggregator->lag_ports->next_port_in_aggregator))) {
+ pr_debug("Some port(s) related to LAG %d - replacing with LAG %d\n",
aggregator->aggregator_identifier,
new_aggregator->aggregator_identifier);
- if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
+ if ((new_aggregator->lag_ports == port) &&
+ new_aggregator->is_active) {
pr_info("%s: Removing an active aggregator\n",
aggregator->slave->dev->master->name);
- // select new active aggregator
+ /* select new active aggregator */
select_new_active_agg = 1;
}
@@ -2038,14 +2124,15 @@ void bond_3ad_unbind_slave(struct slave *slave)
new_aggregator->is_active = aggregator->is_active;
new_aggregator->num_of_ports = aggregator->num_of_ports;
- // update the information that is written on the ports about the aggregator
- for (temp_port = aggregator->lag_ports; temp_port;
- temp_port = temp_port->next_port_in_aggregator) {
+ /* update the information that is written on
+ * the ports about the aggregator
+ */
+ for (temp_port = aggregator->lag_ports; temp_port; temp_port = temp_port->next_port_in_aggregator) {
temp_port->aggregator = new_aggregator;
temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier;
}
- // clear the aggregator
+ /* clear the aggregator */
ad_clear_agg(aggregator);
if (select_new_active_agg)
@@ -2054,42 +2141,50 @@ void bond_3ad_unbind_slave(struct slave *slave)
pr_warning("%s: Warning: unbinding aggregator, and could not find a new aggregator for its ports\n",
slave->dev->master->name);
}
- } else { // in case that the only port related to this aggregator is the one we want to remove
+ } else {
+ /* in case that the only port related to this
+ * aggregator is the one we want to remove
+ */
select_new_active_agg = aggregator->is_active;
- // clear the aggregator
+ /* clear the aggregator */
ad_clear_agg(aggregator);
if (select_new_active_agg) {
pr_info("%s: Removing an active aggregator\n",
slave->dev->master->name);
- // select new active aggregator
+ /* select new active aggregator */
ad_agg_selection_logic(__get_first_agg(port));
}
}
}
pr_debug("Unbinding port %d\n", port->actor_port_number);
- // find the aggregator that this port is connected to
+ /* find the aggregator that this port is connected to */
temp_aggregator = __get_first_agg(port);
- for (; temp_aggregator; temp_aggregator = __get_next_agg(temp_aggregator)) {
+ for (; temp_aggregator;
+ temp_aggregator = __get_next_agg(temp_aggregator)) {
prev_port = NULL;
- // search the port in the aggregator's related ports
+ /* search the port in the aggregator's related ports */
for (temp_port = temp_aggregator->lag_ports; temp_port;
prev_port = temp_port,
temp_port = temp_port->next_port_in_aggregator) {
- if (temp_port == port) { // the aggregator found - detach the port from this aggregator
+ if (temp_port == port) {
+ /* the aggregator found
+ detach the port from this aggregator */
if (prev_port)
- prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator;
+ prev_port->next_port_in_aggregator =
+ temp_port->next_port_in_aggregator;
else
- temp_aggregator->lag_ports = temp_port->next_port_in_aggregator;
+ temp_aggregator->lag_ports =
+ temp_port->next_port_in_aggregator;
temp_aggregator->num_of_ports--;
if (temp_aggregator->num_of_ports == 0) {
select_new_active_agg = temp_aggregator->is_active;
- // clear the aggregator
+ /* clear the aggregator */
ad_clear_agg(temp_aggregator);
if (select_new_active_agg) {
pr_info("%s: Removing an active aggregator\n",
slave->dev->master->name);
- // select new active aggregator
+ /* select new active aggreg */
ad_agg_selection_logic(__get_first_agg(port));
}
}
@@ -2125,13 +2220,14 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
if (bond->kill_timers)
goto out;
- //check if there are any slaves
+ /* check if there are any slaves */
if (bond->slave_cnt == 0)
goto re_arm;
- // check if agg_select_timer timer after initialize is timed out
- if (BOND_AD_INFO(bond).agg_select_timer && !(--BOND_AD_INFO(bond).agg_select_timer)) {
- // select the active aggregator for the bond
+ /* check if agg_select_timer timer after initialize is timed out */
+ if (BOND_AD_INFO(bond).agg_select_timer &&
+ !(--BOND_AD_INFO(bond).agg_select_timer)) {
+ /* select the active aggregator for the bond */
if ((port = __get_first_port(bond))) {
if (!port->slave) {
pr_warning("%s: Warning: bond's first port is uninitialized\n",
@@ -2145,17 +2241,18 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
bond_3ad_set_carrier(bond);
}
- // for each port run the state machines
- for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
+ /* for each port run the state machines */
+ for (port = __get_first_port(bond); port;
+ port = __get_next_port(port)) {
if (!port->slave) {
pr_warning("%s: Warning: Found an uninitialized port\n",
bond->dev->name);
goto re_arm;
}
- /* Lock around state machines to protect data accessed
- * by all (e.g., port->sm_vars). ad_rx_machine may run
- * concurrently due to incoming LACPDU.
+ /* Lock around state machines to protect data accessed by all
+ * (e.g., port->sm_vars).
+ * ad_rx_machine may run concurrently due to incoming LACPDU.
*/
__get_state_machine_lock(port);
@@ -2165,7 +2262,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
ad_mux_machine(port);
ad_tx_machine(port);
- // turn off the BEGIN bit, since we already handled it
+ /* turn off the BEGIN bit, since we already handled it */
if (port->sm_vars & AD_PORT_BEGIN)
port->sm_vars &= ~AD_PORT_BEGIN;
@@ -2198,7 +2295,8 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u
if (!port->slave) {
pr_warning("%s: Warning: port of slave %s is uninitialized\n",
- slave->dev->name, slave->dev->master->name);
+ slave->dev->name,
+ slave->dev->master->name);
return;
}
@@ -2213,7 +2311,9 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u
break;
case AD_TYPE_MARKER:
- // No need to convert fields to Little Endian since we don't use the marker's fields.
+ /* No need to convert fields to Little Endian
+ * since we don't use the marker's fields.
+ */
switch (((struct bond_marker *)lacpdu)->tlv_type) {
case AD_MARKER_INFORMATION_SUBTYPE:
@@ -2248,19 +2348,22 @@ void bond_3ad_adapter_speed_changed(struct slave *slave)
port = &(SLAVE_AD_INFO(slave).port);
- // if slave is null, the whole port is not initialized
+ /* if slave is null, the whole port is not initialized */
if (!port->slave) {
pr_warning("Warning: %s: speed changed for uninitialized port on %s\n",
- slave->dev->master->name, slave->dev->name);
+ slave->dev->master->name,
+ slave->dev->name);
return;
}
port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
port->actor_oper_port_key = port->actor_admin_port_key |=
(__get_link_speed(port) << 1);
+
pr_debug("Port %d changed speed\n", port->actor_port_number);
- // there is no need to reselect a new aggregator, just signal the
- // state machines to reinitialize
+ /* there is no need to reselect a new aggregator,
+ * just signal the state machines to reinitialize
+ */
port->sm_vars |= AD_PORT_BEGIN;
}
@@ -2276,7 +2379,7 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave)
port = &(SLAVE_AD_INFO(slave).port);
- // if slave is null, the whole port is not initialized
+ /* if slave is null, the whole port is not initialized */
if (!port->slave) {
pr_warning("%s: Warning: duplex changed for uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
@@ -2286,9 +2389,11 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave)
port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
port->actor_oper_port_key = port->actor_admin_port_key |=
__get_duplex(port);
+
pr_debug("Port %d changed duplex\n", port->actor_port_number);
- // there is no need to reselect a new aggregator, just signal the
- // state machines to reinitialize
+ /* there is no need to reselect a new aggregator,
+ * just signal the state machines to reinitialize
+ */
port->sm_vars |= AD_PORT_BEGIN;
}
@@ -2305,15 +2410,18 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
port = &(SLAVE_AD_INFO(slave).port);
- // if slave is null, the whole port is not initialized
+ /* if slave is null, the whole port is not initialized */
if (!port->slave) {
pr_warning("Warning: %s: link status changed for uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
return;
}
- // on link down we are zeroing duplex and speed since some of the adaptors(ce1000.lan) report full duplex/speed instead of N/A(duplex) / 0(speed)
- // on link up we are forcing recheck on the duplex and speed since some of he adaptors(ce1000.lan) report
+ /* on link down we are zeroing duplex and speed
+ * since some of the adapters (ce1000.lan) report full duplex/speed
+ * instead of N/A (duplex) / 0(speed)
+ * on link up we are forcing recheck on the duplex and speed
+ */
if (link == BOND_LINK_UP) {
port->is_enabled = true;
port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
@@ -2329,9 +2437,15 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
port->actor_oper_port_key = (port->actor_admin_port_key &=
~AD_SPEED_KEY_BITS);
}
- //BOND_PRINT_DBG(("Port %d changed link status to %s", port->actor_port_number, ((link == BOND_LINK_UP)?"UP":"DOWN")));
- // there is no need to reselect a new aggregator, just signal the
- // state machines to reinitialize
+
+ /* BOND_PRINT_DBG(("Port %d changed link status to %s",
+ * port->actor_port_number,
+ * ((link == BOND_LINK_UP)?"UP":"DOWN")));
+ */
+
+ /* there is no need to reselect a new aggregator,
+ * just signal the state machines to reinitialize
+ */
port->sm_vars |= AD_PORT_BEGIN;
}
@@ -2387,7 +2501,8 @@ int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
ad_info->ports = aggregator->num_of_ports;
ad_info->actor_key = aggregator->actor_oper_aggregator_key;
ad_info->partner_key = aggregator->partner_oper_aggregator_key;
- memcpy(ad_info->partner_system, aggregator->partner_system.mac_addr_value, ETH_ALEN);
+ memcpy(ad_info->partner_system,
+ aggregator->partner_system.mac_addr_value, ETH_ALEN);
return 0;
}
@@ -2405,9 +2520,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
struct ad_info ad_info;
int res = 1;
- /* make sure that the slaves list will
- * not change during tx
- */
+ /* make sure that the slaves list will not change during tx */
read_lock(&bond->lock);
if (!BOND_IS_OK(bond))
@@ -2442,7 +2555,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
if (slave_agg_no >= 0) {
pr_err("%s: Error: Couldn't find a slave to tx on for aggregator ID %d\n",
- dev->name, agg_id);
+ dev->name, agg_id);
goto out;
}
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index b28baff..f12e054 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -28,7 +28,7 @@
#include <linux/netdevice.h>
#include <linux/if_ether.h>
-// General definitions
+/* General definitions */
#define PKT_TYPE_LACPDU cpu_to_be16(ETH_P_SLOW)
#define AD_TIMER_INTERVAL 100 /*msec*/
@@ -47,54 +47,54 @@ enum {
BOND_AD_COUNT = 2,
};
-// rx machine states(43.4.11 in the 802.3ad standard)
+/* rx machine states (43.4.11 in the 802.3ad standard) */
typedef enum {
AD_RX_DUMMY,
- AD_RX_INITIALIZE, // rx Machine
- AD_RX_PORT_DISABLED, // rx Machine
- AD_RX_LACP_DISABLED, // rx Machine
- AD_RX_EXPIRED, // rx Machine
- AD_RX_DEFAULTED, // rx Machine
- AD_RX_CURRENT // rx Machine
+ AD_RX_INITIALIZE,
+ AD_RX_PORT_DISABLED,
+ AD_RX_LACP_DISABLED,
+ AD_RX_EXPIRED,
+ AD_RX_DEFAULTED,
+ AD_RX_CURRENT
} rx_states_t;
-// periodic machine states(43.4.12 in the 802.3ad standard)
+/* periodic machine states (43.4.12 in the 802.3ad standard) */
typedef enum {
AD_PERIODIC_DUMMY,
- AD_NO_PERIODIC, // periodic machine
- AD_FAST_PERIODIC, // periodic machine
- AD_SLOW_PERIODIC, // periodic machine
- AD_PERIODIC_TX // periodic machine
+ AD_NO_PERIODIC,
+ AD_FAST_PERIODIC,
+ AD_SLOW_PERIODIC,
+ AD_PERIODIC_TX
} periodic_states_t;
-// mux machine states(43.4.13 in the 802.3ad standard)
+/* mux machine states (43.4.13 in the 802.3ad standard) */
typedef enum {
AD_MUX_DUMMY,
- AD_MUX_DETACHED, // mux machine
- AD_MUX_WAITING, // mux machine
- AD_MUX_ATTACHED, // mux machine
- AD_MUX_COLLECTING_DISTRIBUTING // mux machine
+ AD_MUX_DETACHED,
+ AD_MUX_WAITING,
+ AD_MUX_ATTACHED,
+ AD_MUX_COLLECTING_DISTRIBUTING
} mux_states_t;
-// tx machine states(43.4.15 in the 802.3ad standard)
+/* tx machine states (43.4.15 in the 802.3ad standard) */
typedef enum {
AD_TX_DUMMY,
- AD_TRANSMIT // tx Machine
+ AD_TRANSMIT
} tx_states_t;
-// rx indication types
+/* rx indication types */
typedef enum {
- AD_TYPE_LACPDU = 1, // type lacpdu
- AD_TYPE_MARKER // type marker
+ AD_TYPE_LACPDU = 1,
+ AD_TYPE_MARKER
} pdu_type_t;
-// rx marker indication types
+/* rx marker indication types */
typedef enum {
- AD_MARKER_INFORMATION_SUBTYPE = 1, // marker imformation subtype
- AD_MARKER_RESPONSE_SUBTYPE // marker response subtype
+ AD_MARKER_INFORMATION_SUBTYPE = 1,
+ AD_MARKER_RESPONSE_SUBTYPE
} bond_marker_subtype_t;
-// timers types(43.4.9 in the 802.3ad standard)
+/* timers types (43.4.9 in the 802.3ad standard) */
typedef enum {
AD_CURRENT_WHILE_TIMER,
AD_ACTOR_CHURN_TIMER,
@@ -105,35 +105,37 @@ typedef enum {
#pragma pack(1)
-// Link Aggregation Control Protocol(LACP) data unit structure(43.4.2.2 in the 802.3ad standard)
+/* Link Aggregation Control Protocol (LACP) data unit structure
+ * (43.4.2.2 in the 802.3ad standard)
+ */
typedef struct lacpdu {
- u8 subtype; // = LACP(= 0x01)
+ u8 subtype; /* = LACP(= 0x01) */
u8 version_number;
- u8 tlv_type_actor_info; // = actor information(type/length/value)
- u8 actor_information_length; // = 20
+ u8 tlv_type_actor_info; /* = actor info(type/length/value)*/
+ u8 actor_information_length; /* = 20 */
__be16 actor_system_priority;
struct mac_addr actor_system;
__be16 actor_key;
__be16 actor_port_priority;
__be16 actor_port;
u8 actor_state;
- u8 reserved_3_1[3]; // = 0
- u8 tlv_type_partner_info; // = partner information
- u8 partner_information_length; // = 20
+ u8 reserved_3_1[3]; /* = 0 */
+ u8 tlv_type_partner_info; /* = partner information */
+ u8 partner_information_length; /* = 20 */
__be16 partner_system_priority;
struct mac_addr partner_system;
__be16 partner_key;
__be16 partner_port_priority;
__be16 partner_port;
u8 partner_state;
- u8 reserved_3_2[3]; // = 0
- u8 tlv_type_collector_info; // = collector information
- u8 collector_information_length; // = 16
+ u8 reserved_3_2[3]; /* = 0 */
+ u8 tlv_type_collector_info; /* = collector information */
+ u8 collector_information_length; /* = 16 */
__be16 collector_max_delay;
u8 reserved_12[12];
- u8 tlv_type_terminator; // = terminator
- u8 terminator_length; // = 0
- u8 reserved_50[50]; // = 0
+ u8 tlv_type_terminator; /* = terminator */
+ u8 terminator_length; /* = 0 */
+ u8 reserved_50[50]; /* = 0 */
} lacpdu_t;
typedef struct lacpdu_header {
@@ -141,20 +143,22 @@ typedef struct lacpdu_header {
struct lacpdu lacpdu;
} lacpdu_header_t;
-// Marker Protocol Data Unit(PDU) structure(43.5.3.2 in the 802.3ad standard)
+/* Marker Protocol Data Unit(PDU) structure
+ * (43.5.3.2 in the 802.3ad standard)
+ */
typedef struct bond_marker {
- u8 subtype; // = 0x02 (marker PDU)
- u8 version_number; // = 0x01
- u8 tlv_type; // = 0x01 (marker information)
- // = 0x02 (marker response information)
- u8 marker_length; // = 0x16
- u16 requester_port; // The number assigned to the port by the requester
- struct mac_addr requester_system; // The requester's system id
- u32 requester_transaction_id; // The transaction id allocated by the requester,
- u16 pad; // = 0
- u8 tlv_type_terminator; // = 0x00
- u8 terminator_length; // = 0x00
- u8 reserved_90[90]; // = 0
+ u8 subtype; /* = 0x02 (marker PDU) */
+ u8 version_number; /* = 0x01 */
+ u8 tlv_type; /* = 0x01 (marker information)
+ * = 0x02 (marker response info */
+ u8 marker_length; /* = 0x16 */
+ u16 requester_port;
+ struct mac_addr requester_system; /* The requester's system id */
+ u32 requester_transaction_id;
+ u16 pad; /* = 0 */
+ u8 tlv_type_terminator; /* = 0x00 */
+ u8 terminator_length; /* = 0x00 */
+ u8 reserved_90[90]; /* = 0 */
} bond_marker_t;
typedef struct bond_marker_header {
@@ -173,7 +177,7 @@ struct port;
#pragma pack(8)
#endif
-// aggregator structure(43.4.5 in the 802.3ad standard)
+/* aggregator structure (43.4.5 in the 802.3ad standard) */
typedef struct aggregator {
struct mac_addr aggregator_mac_address;
u16 aggregator_identifier;
@@ -183,12 +187,13 @@ typedef struct aggregator {
struct mac_addr partner_system;
u16 partner_system_priority;
u16 partner_oper_aggregator_key;
- u16 receive_state; // BOOLEAN
- u16 transmit_state; // BOOLEAN
+ u16 receive_state; /* BOOLEAN */
+ u16 transmit_state; /* BOOLEAN */
struct port *lag_ports;
- // ****** PRIVATE PARAMETERS ******
- struct slave *slave; // pointer to the bond slave that this aggregator belongs to
- u16 is_active; // BOOLEAN. Indicates if this aggregator is active
+ /* ****** PRIVATE PARAMETERS ****** */
+ struct slave *slave; /* pointer to the bond slave
+ that this aggregator belongs to */
+ u16 is_active; /* BOOLEAN. Indicates if the aggregator is active*/
u16 num_of_ports;
} aggregator_t;
@@ -201,12 +206,18 @@ struct port_params {
u16 port_state;
};
-// port structure(43.4.6 in the 802.3ad standard)
+/* port structure (43.4.6 in the 802.3ad standard) */
typedef struct port {
u16 actor_port_number;
u16 actor_port_priority;
- struct mac_addr actor_system; // This parameter is added here although it is not specified in the standard, just for simplification
- u16 actor_system_priority; // This parameter is added here although it is not specified in the standard, just for simplification
+
+ /* in a attempt to simplify operations the
+ * following two elements were included here
+ * despite they are not specified in the standard
+ */
+ struct mac_addr actor_system;
+ u16 actor_system_priority;
+
u16 actor_port_aggregator_identifier;
bool ntt;
u16 actor_admin_port_key;
@@ -219,21 +230,21 @@ typedef struct port {
bool is_enabled;
- // ****** PRIVATE PARAMETERS ******
- u16 sm_vars; // all state machines variables for this port
- rx_states_t sm_rx_state; // state machine rx state
- u16 sm_rx_timer_counter; // state machine rx timer counter
- periodic_states_t sm_periodic_state;// state machine periodic state
- u16 sm_periodic_timer_counter; // state machine periodic timer counter
- mux_states_t sm_mux_state; // state machine mux state
- u16 sm_mux_timer_counter; // state machine mux timer counter
- tx_states_t sm_tx_state; // state machine tx state
- u16 sm_tx_timer_counter; // state machine tx timer counter(allways on - enter to transmit state 3 time per second)
- struct slave *slave; // pointer to the bond slave that this port belongs to
- struct aggregator *aggregator; // pointer to an aggregator that this port related to
- struct port *next_port_in_aggregator; // Next port on the linked list of the parent aggregator
- u32 transaction_id; // continuous number for identification of Marker PDU's;
- struct lacpdu lacpdu; // the lacpdu that will be sent for this port
+ /* ****** PRIVATE PARAMETERS ****** */
+ u16 sm_vars;
+ rx_states_t sm_rx_state;
+ u16 sm_rx_timer_counter;
+ periodic_states_t sm_periodic_state;
+ u16 sm_periodic_timer_counter;
+ mux_states_t sm_mux_state;
+ u16 sm_mux_timer_counter;
+ tx_states_t sm_tx_state;
+ u16 sm_tx_timer_counter;
+ struct slave *slave;
+ struct aggregator *aggregator;
+ struct port *next_port_in_aggregator;
+ u32 transaction_id;
+ struct lacpdu lacpdu;
} port_t;
// system structure
@@ -246,41 +257,41 @@ struct ad_system {
#pragma pack()
#endif
-// ================= AD Exported structures to the main bonding code ==================
+/* =========== AD Exported structures to the main bonding code ============ */
#define BOND_AD_INFO(bond) ((bond)->ad_info)
#define SLAVE_AD_INFO(slave) ((slave)->ad_info)
struct ad_bond_info {
struct ad_system system; /* 802.3ad system structure */
- u32 agg_select_timer; // Timer to select aggregator after all adapter's hand shakes
- u32 agg_select_mode; // Mode of selection of active aggregator(bandwidth/count)
- int lacp_fast; /* whether fast periodic tx should be
- * requested
- */
+ u32 agg_select_timer; /* aggregator's selected timer */
+ u32 agg_select_mode; /* aggregator's selected mode */
+ int lacp_fast;
struct timer_list ad_timer;
struct packet_type ad_pkt_type;
};
struct ad_slave_info {
- struct aggregator aggregator; // 802.3ad aggregator structure
- struct port port; // 802.3ad port structure
- spinlock_t state_machine_lock; /* mutex state machines vs.
- incoming LACPDU */
+ struct aggregator aggregator; /* 802.3ad aggregator structure */
+ struct port port; /* 802.3ad port structure */
+ spinlock_t state_machine_lock; /* mutex state machines vs.
+ * incoming LACPDU */
u16 id;
};
-// ================= AD Exported functions to the main bonding code ==================
-void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast);
-int bond_3ad_bind_slave(struct slave *slave);
+/* ========= AD Exported functions to the main bonding code ========== */
+void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution,
+ int lacp_fast);
+int bond_3ad_bind_slave(struct slave *slave);
void bond_3ad_unbind_slave(struct slave *slave);
void bond_3ad_state_machine_handler(struct work_struct *);
void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout);
void bond_3ad_adapter_speed_changed(struct slave *slave);
void bond_3ad_adapter_duplex_changed(struct slave *slave);
void bond_3ad_handle_link_change(struct slave *slave, char link);
-int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
+int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev);
+int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type* ptype, struct net_device *orig_dev);
int bond_3ad_set_carrier(struct bonding *bond);
#endif //__BOND_3AD_H__
--
1.7.4.4
--
Rafael Aquini <aquini@linux.com>
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox