Netdev List
 help / color / mirror / Atom feed

* [PATCH net-next v2 01/10] headers, pppox: Add missing #include to <linux/if_pppox.h>
From: Ben Hutchings @ 2011-08-25  4:40 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Michal Ostrowski
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 633 bytes --]

<linux/if_ppox.h> uses ETH_ALEN, defined in <linux/if_ether.h>.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/if_pppox.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 397921b..60e5558 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -20,8 +20,8 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
-#ifdef  __KERNEL__
 #include <linux/if_ether.h>
+#ifdef  __KERNEL__
 #include <linux/if.h>
 #include <linux/netdevice.h>
 #include <linux/ppp_channel.h>
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 02/10] headers, ax25: Add missing #include to <linux/netrom.h>, <linux/rose.h>
From: Ben Hutchings @ 2011-08-25  4:43 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Ralf Baechle, linux-hams
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 915 bytes --]

These headers use the ax25_address type defined in <linux/ax25.h>.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
---
 include/linux/netrom.h |    2 ++
 include/linux/rose.h   |    2 ++
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/include/linux/netrom.h b/include/linux/netrom.h
index 6939b32..af7313c 100644
--- a/include/linux/netrom.h
+++ b/include/linux/netrom.h
@@ -7,6 +7,8 @@
 #ifndef	NETROM_KERNEL_H
 #define	NETROM_KERNEL_H
 
+#include <linux/ax25.h>
+
 #define NETROM_MTU	236
 
 #define NETROM_T1	1
diff --git a/include/linux/rose.h b/include/linux/rose.h
index c7b4b18..e8289cd 100644
--- a/include/linux/rose.h
+++ b/include/linux/rose.h
@@ -7,6 +7,8 @@
 #ifndef	ROSE_KERNEL_H
 #define	ROSE_KERNEL_H
 
+#include <linux/ax25.h>
+
 #define ROSE_MTU	251
 
 #define ROSE_MAX_DIGIS 6
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 03/10] headers, pppol2tp: Use __kernel_pid_t in <linux/pppol2tp.h>
From: Ben Hutchings @ 2011-08-25  4:43 UTC (permalink / raw)
  To: David Miller; +Cc: netdev
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 755 bytes --]

<linux/types.h> defines __kernel_pid_t for userland; pid_t is
defined elsewhere (and potentially differently).

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/if_pppol2tp.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index 184bc55..23cefa1 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -39,7 +39,7 @@ struct pppol2tp_addr {
  * bits. So we need a different sockaddr structure.
  */
 struct pppol2tpv3_addr {
-	pid_t	pid;			/* pid that owns the fd.
+	__kernel_pid_t	pid;		/* pid that owns the fd.
 					 * 0 => current */
 	int	fd;			/* FD of UDP or IP socket to use */
 
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 04/10] headers, net: Use __kernel_sa_family_t in more definitions shared with userland
From: Ben Hutchings @ 2011-08-25  4:43 UTC (permalink / raw)
  To: David Miller; +Cc: netdev
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 11414 bytes --]

Complete the work started with commit
6602a4baf4d1a73cc4685a39ef859e1c5ddf654c ('net: Make userland include
of netlink.h more sane').

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/atalk.h            |    3 ++-
 include/linux/ax25.h             |    2 +-
 include/linux/caif/caif_socket.h |    7 +------
 include/linux/can.h              |    2 +-
 include/linux/if_pppox.h         |    7 ++++---
 include/linux/in.h               |    2 +-
 include/linux/ipx.h              |    2 +-
 include/linux/irda.h             |    9 +++------
 include/linux/l2tp.h             |    7 ++++---
 include/linux/llc.h              |   10 +++++++---
 include/linux/netlink.h          |    2 +-
 include/linux/phonet.h           |    5 +++--
 include/linux/rose.h             |    5 +++--
 include/linux/un.h               |    4 +++-
 include/linux/x25.h              |    3 ++-
 15 files changed, 37 insertions(+), 33 deletions(-)

diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index d34c187..f57c368 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <asm/byteorder.h>
+#include <linux/socket.h>
 
 /*
  * AppleTalk networking structures
@@ -28,7 +29,7 @@ struct atalk_addr {
 };
 
 struct sockaddr_at {
-	sa_family_t	  sat_family;
+	__kernel_sa_family_t sat_family;
 	__u8		  sat_port;
 	struct atalk_addr sat_addr;
 	char		  sat_zero[8];
diff --git a/include/linux/ax25.h b/include/linux/ax25.h
index 56c11f0..74c89a4 100644
--- a/include/linux/ax25.h
+++ b/include/linux/ax25.h
@@ -47,7 +47,7 @@ typedef struct {
 } ax25_address;
 
 struct sockaddr_ax25 {
-	sa_family_t	sax25_family;
+	__kernel_sa_family_t sax25_family;
 	ax25_address	sax25_call;
 	int		sax25_ndigis;
 	/* Digipeater ax25_address sets follow */
diff --git a/include/linux/caif/caif_socket.h b/include/linux/caif/caif_socket.h
index d9cb19b..3f3bac6 100644
--- a/include/linux/caif/caif_socket.h
+++ b/include/linux/caif/caif_socket.h
@@ -9,12 +9,7 @@
 #define _LINUX_CAIF_SOCKET_H
 
 #include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/socket.h>
-#else
-#include <sys/socket.h>
-#endif
 
 /**
  * enum caif_link_selector -    Physical Link Selection.
@@ -144,7 +139,7 @@ enum caif_debug_service {
  * CAIF Channel. It defines the service to connect to on the modem.
  */
 struct sockaddr_caif {
-	sa_family_t  family;
+	__kernel_sa_family_t  family;
 	union {
 		struct {
 			__u8  type;		/* type: enum caif_at_type */
diff --git a/include/linux/can.h b/include/linux/can.h
index d183333..bb047dc 100644
--- a/include/linux/can.h
+++ b/include/linux/can.h
@@ -78,7 +78,7 @@ struct can_frame {
  * @can_addr:    protocol specific address information
  */
 struct sockaddr_can {
-	sa_family_t can_family;
+	__kernel_sa_family_t can_family;
 	int         can_ifindex;
 	union {
 		/* transport protocol class address information (e.g. ISOTP) */
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 60e5558..b5f927f 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -20,6 +20,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
+#include <linux/socket.h>
 #include <linux/if_ether.h>
 #ifdef  __KERNEL__
 #include <linux/if.h>
@@ -63,7 +64,7 @@ struct pptp_addr {
 #define PX_MAX_PROTO   3
 
 struct sockaddr_pppox {
-	sa_family_t     sa_family;            /* address family, AF_PPPOX */
+	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
 	unsigned int    sa_protocol;          /* protocol identifier */
 	union {
 		struct pppoe_addr  pppoe;
@@ -77,7 +78,7 @@ struct sockaddr_pppox {
  * type instead.
  */
 struct sockaddr_pppol2tp {
-	sa_family_t     sa_family;      /* address family, AF_PPPOX */
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
 	unsigned int    sa_protocol;    /* protocol identifier */
 	struct pppol2tp_addr pppol2tp;
 } __attribute__((packed));
@@ -86,7 +87,7 @@ struct sockaddr_pppol2tp {
  * bits. So we need a different sockaddr structure.
  */
 struct sockaddr_pppol2tpv3 {
-	sa_family_t     sa_family;      /* address family, AF_PPPOX */
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
 	unsigned int    sa_protocol;    /* protocol identifier */
 	struct pppol2tpv3_addr pppol2tp;
 } __attribute__((packed));
diff --git a/include/linux/in.h b/include/linux/in.h
index beeb6de..01129c0 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -182,7 +182,7 @@ struct in_pktinfo {
 /* Structure describing an Internet (IP) socket address. */
 #define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
 struct sockaddr_in {
-  sa_family_t		sin_family;	/* Address family		*/
+  __kernel_sa_family_t	sin_family;	/* Address family		*/
   __be16		sin_port;	/* Port number			*/
   struct in_addr	sin_addr;	/* Internet address		*/
 
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
index aabb1d2..3d48014 100644
--- a/include/linux/ipx.h
+++ b/include/linux/ipx.h
@@ -7,7 +7,7 @@
 #define IPX_MTU		576
 
 struct sockaddr_ipx {
-	sa_family_t	sipx_family;
+	__kernel_sa_family_t sipx_family;
 	__be16		sipx_port;
 	__be32		sipx_network;
 	unsigned char 	sipx_node[IPX_NODE_LEN];
diff --git a/include/linux/irda.h b/include/linux/irda.h
index 00bdad0..a014c32 100644
--- a/include/linux/irda.h
+++ b/include/linux/irda.h
@@ -26,12 +26,9 @@
 #define KERNEL_IRDA_H
 
 #include <linux/types.h>
+#include <linux/socket.h>
 
-/* Please do *not* add any #include in this file, this file is
- * included as-is in user space.
- * Please fix the calling file to properly included needed files before
- * this one, or preferably to include <net/irda/irda.h> instead.
- * Jean II */
+/* Note that this file is shared with user space. */
 
 /* Hint bit positions for first hint byte */
 #define HINT_PNP         0x01
@@ -125,7 +122,7 @@ enum {
 #define LSAP_ANY              0xff
 
 struct sockaddr_irda {
-	sa_family_t sir_family;   /* AF_IRDA */
+	__kernel_sa_family_t sir_family; /* AF_IRDA */
 	__u8        sir_lsap_sel; /* LSAP selector */
 	__u32       sir_addr;     /* Device address */
 	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
index 4bdb31d..e77d7f9 100644
--- a/include/linux/l2tp.h
+++ b/include/linux/l2tp.h
@@ -8,8 +8,8 @@
 #define _LINUX_L2TP_H_
 
 #include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/socket.h>
+#ifdef __KERNEL__
 #include <linux/in.h>
 #else
 #include <netinet/in.h>
@@ -26,14 +26,15 @@
 #define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
 struct sockaddr_l2tpip {
 	/* The first fields must match struct sockaddr_in */
-	sa_family_t	l2tp_family;	/* AF_INET */
+	__kernel_sa_family_t l2tp_family; /* AF_INET */
 	__be16		l2tp_unused;	/* INET port number (unused) */
 	struct in_addr	l2tp_addr;	/* Internet address */
 
 	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
 
 	/* Pad to size of `struct sockaddr'. */
-	unsigned char	__pad[sizeof(struct sockaddr) - sizeof(sa_family_t) -
+	unsigned char	__pad[sizeof(struct sockaddr) -
+			      sizeof(__kernel_sa_family_t) -
 			      sizeof(__be16) - sizeof(struct in_addr) -
 			      sizeof(__u32)];
 };
diff --git a/include/linux/llc.h b/include/linux/llc.h
index ad7074b..a2418ae 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h
@@ -12,16 +12,20 @@
  *
  * See the GNU General Public License for more details.
  */
+
+#include <linux/socket.h>
+
 #define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
 struct sockaddr_llc {
-	sa_family_t     sllc_family;	/* AF_LLC */
-	sa_family_t	sllc_arphrd;	/* ARPHRD_ETHER */
+	__kernel_sa_family_t sllc_family; /* AF_LLC */
+	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
 	unsigned char   sllc_test;
 	unsigned char   sllc_xid;
 	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
 	unsigned char   sllc_sap;
 	unsigned char   sllc_mac[IFHWADDRLEN];
-	unsigned char   __pad[__LLC_SOCK_SIZE__ - sizeof(sa_family_t) * 2 -
+	unsigned char   __pad[__LLC_SOCK_SIZE__ -
+			      sizeof(__kernel_sa_family_t) * 2 -
 			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
 };
 
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 180540a..8180cd9 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -1,7 +1,7 @@
 #ifndef __LINUX_NETLINK_H
 #define __LINUX_NETLINK_H
 
-#include <linux/socket.h> /* for sa_family_t */
+#include <linux/socket.h> /* for __kernel_sa_family_t */
 #include <linux/types.h>
 
 #define NETLINK_ROUTE		0	/* Routing/device hook				*/
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index 6fb1384..f53a416 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -24,6 +24,7 @@
 #define LINUX_PHONET_H
 
 #include <linux/types.h>
+#include <linux/socket.h>
 
 /* Automatic protocol selection */
 #define PN_PROTO_TRANSPORT	0
@@ -96,11 +97,11 @@ struct phonetmsg {
 
 /* Phonet socket address structure */
 struct sockaddr_pn {
-	sa_family_t spn_family;
+	__kernel_sa_family_t spn_family;
 	__u8 spn_obj;
 	__u8 spn_dev;
 	__u8 spn_resource;
-	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - 3];
+	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
 } __attribute__((packed));
 
 /* Well known address */
diff --git a/include/linux/rose.h b/include/linux/rose.h
index e8289cd..1fcfe95 100644
--- a/include/linux/rose.h
+++ b/include/linux/rose.h
@@ -7,6 +7,7 @@
 #ifndef	ROSE_KERNEL_H
 #define	ROSE_KERNEL_H
 
+#include <linux/socket.h>
 #include <linux/ax25.h>
 
 #define ROSE_MTU	251
@@ -46,7 +47,7 @@ typedef struct {
 } rose_address;
 
 struct sockaddr_rose {
-	sa_family_t	srose_family;
+	__kernel_sa_family_t srose_family;
 	rose_address	srose_addr;
 	ax25_address	srose_call;
 	int		srose_ndigis;
@@ -54,7 +55,7 @@ struct sockaddr_rose {
 };
 
 struct full_sockaddr_rose {
-	sa_family_t	srose_family;
+	__kernel_sa_family_t srose_family;
 	rose_address	srose_addr;
 	ax25_address	srose_call;
 	unsigned int	srose_ndigis;
diff --git a/include/linux/un.h b/include/linux/un.h
index 45561c5..3ed3e46 100644
--- a/include/linux/un.h
+++ b/include/linux/un.h
@@ -1,10 +1,12 @@
 #ifndef _LINUX_UN_H
 #define _LINUX_UN_H
 
+#include <linux/socket.h>
+
 #define UNIX_PATH_MAX	108
 
 struct sockaddr_un {
-	sa_family_t sun_family;	/* AF_UNIX */
+	__kernel_sa_family_t sun_family; /* AF_UNIX */
 	char sun_path[UNIX_PATH_MAX];	/* pathname */
 };
 
diff --git a/include/linux/x25.h b/include/linux/x25.h
index 6450a7f..810cce6 100644
--- a/include/linux/x25.h
+++ b/include/linux/x25.h
@@ -12,6 +12,7 @@
 #define	X25_KERNEL_H
 
 #include <linux/types.h>
+#include <linux/socket.h>
 
 #define	SIOCX25GSUBSCRIP	(SIOCPROTOPRIVATE + 0)
 #define	SIOCX25SSUBSCRIP	(SIOCPROTOPRIVATE + 1)
@@ -57,7 +58,7 @@ struct x25_address {
  *	Linux X.25 Address structure, used for bind, and connect mostly.
  */
 struct sockaddr_x25 {
-	sa_family_t	   sx25_family;		/* Must be AF_X25 */
+	__kernel_sa_family_t sx25_family;	/* Must be AF_X25 */
 	struct x25_address sx25_addr;		/* X.121 Address */
 };
 
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 05/10] headers, net: Define struct __kernel_sockaddr, replacing struct sockaddr
From: Ben Hutchings @ 2011-08-25  4:44 UTC (permalink / raw)
  To: David Miller; +Cc: netdev
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 3210 bytes --]

Commit 9c501935a3cdcf6b1d35aaee3aa11c7a7051a305 ('net: Support
inclusion of <linux/socket.h> before <sys/socket.h>') removed the
definition of struct sockaddr for userland.

But we still have several headers using struct sockaddr, and we
shouldn't make them include <sys/socket.h> as that risks recursive
inclusion in future.  Define and use an identical struct
__kernel_sockaddr instead.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/if.h     |   12 ++++++------
 include/linux/phonet.h |    3 ++-
 include/linux/socket.h |   17 +++++++++--------
 3 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/include/linux/if.h b/include/linux/if.h
index db20bd4..f9ce5fb 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -20,7 +20,7 @@
 #define _LINUX_IF_H
 
 #include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/socket.h>		/* for "struct __kernel_sockaddr" et al	*/
 #include <linux/compiler.h>		/* for "__user" et al           */
 
 #define	IFNAMSIZ	16
@@ -176,11 +176,11 @@ struct ifreq {
 	} ifr_ifrn;
 	
 	union {
-		struct	sockaddr ifru_addr;
-		struct	sockaddr ifru_dstaddr;
-		struct	sockaddr ifru_broadaddr;
-		struct	sockaddr ifru_netmask;
-		struct  sockaddr ifru_hwaddr;
+		struct	__kernel_sockaddr ifru_addr;
+		struct	__kernel_sockaddr ifru_dstaddr;
+		struct	__kernel_sockaddr ifru_broadaddr;
+		struct	__kernel_sockaddr ifru_netmask;
+		struct  __kernel_sockaddr ifru_hwaddr;
 		short	ifru_flags;
 		int	ifru_ivalue;
 		int	ifru_mtu;
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index f53a416..9aba9ce 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -101,7 +101,8 @@ struct sockaddr_pn {
 	__u8 spn_obj;
 	__u8 spn_dev;
 	__u8 spn_resource;
-	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
+	__u8 spn_zero[sizeof(struct __kernel_sockaddr) -
+		      sizeof(__kernel_sa_family_t) - 3];
 } __attribute__((packed));
 
 /* Well known address */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index d0e77f6..f13ad7b 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -10,6 +10,14 @@
 
 typedef unsigned short __kernel_sa_family_t;
 
+/*
+ *	1003.1g requires sa_family_t and that sa_data is char.
+ */
+struct __kernel_sockaddr {
+	__kernel_sa_family_t sa_family;	/* address family, AF_xxx	*/
+	char		sa_data[14];	/* 14 bytes of protocol address	*/
+};
+
 struct __kernel_sockaddr_storage {
 	__kernel_sa_family_t	ss_family;		/* address family */
 	/* Following field(s) are implementation specific */
@@ -39,15 +47,8 @@ extern void socket_seq_show(struct seq_file *seq);
 
 typedef __kernel_sa_family_t	sa_family_t;
 
-/*
- *	1003.1g requires sa_family_t and that sa_data is char.
- */
+#define sockaddr __kernel_sockaddr
  
-struct sockaddr {
-	sa_family_t	sa_family;	/* address family, AF_xxx	*/
-	char		sa_data[14];	/* 14 bytes of protocol address	*/
-};
-
 struct linger {
 	int		l_onoff;	/* Linger active		*/
 	int		l_linger;	/* How long to linger for	*/
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 06/10] headers, netfilter: Use kernel type names __u8, __u16, __u32
From: Ben Hutchings @ 2011-08-25  4:44 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Patrick McHardy, netfilter-devel
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 5343 bytes --]

These types are guaranteed to be defined by <linux/types.h> for
both userland and kernel, unlike u_intN_t.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter_arp/arp_tables.h  |   14 +++++++-------
 include/linux/netfilter_ipv4/ip_tables.h  |   20 ++++++++++----------
 include/linux/netfilter_ipv6/ip6_tables.h |   22 +++++++++++-----------
 3 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index adbf4bf..e08565d 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -52,7 +52,7 @@ struct arpt_arp {
 	struct in_addr smsk, tmsk;
 
 	/* Device hw address length, src+target device addresses */
-	u_int8_t arhln, arhln_mask;
+	__u8 arhln, arhln_mask;
 	struct arpt_devaddr_info src_devaddr;
 	struct arpt_devaddr_info tgt_devaddr;
 
@@ -71,9 +71,9 @@ struct arpt_arp {
 	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
 
 	/* Flags word */
-	u_int8_t flags;
+	__u8 flags;
 	/* Inverse flags */
-	u_int16_t invflags;
+	__u16 invflags;
 };
 
 /* Values for "flag" field in struct arpt_ip (general arp structure).
@@ -102,9 +102,9 @@ struct arpt_entry
 	struct arpt_arp arp;
 
 	/* Size of arpt_entry + matches */
-	u_int16_t target_offset;
+	__u16 target_offset;
 	/* Size of arpt_entry + matches + target */
-	u_int16_t next_offset;
+	__u16 next_offset;
 
 	/* Back pointer */
 	unsigned int comefrom;
@@ -260,8 +260,8 @@ extern unsigned int arpt_do_table(struct sk_buff *skb,
 
 struct compat_arpt_entry {
 	struct arpt_arp arp;
-	u_int16_t target_offset;
-	u_int16_t next_offset;
+	__u16 target_offset;
+	__u16 next_offset;
 	compat_uint_t comefrom;
 	struct compat_xt_counters counters;
 	unsigned char elems[0];
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index 64a5d95..db79231 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -81,12 +81,12 @@ struct ipt_ip {
 	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
 
 	/* Protocol, 0 = ANY */
-	u_int16_t proto;
+	__u16 proto;
 
 	/* Flags word */
-	u_int8_t flags;
+	__u8 flags;
 	/* Inverse flags */
-	u_int8_t invflags;
+	__u8 invflags;
 };
 
 /* Values for "flag" field in struct ipt_ip (general ip structure). */
@@ -114,9 +114,9 @@ struct ipt_entry {
 	unsigned int nfcache;
 
 	/* Size of ipt_entry + matches */
-	u_int16_t target_offset;
+	__u16 target_offset;
 	/* Size of ipt_entry + matches + target */
-	u_int16_t next_offset;
+	__u16 next_offset;
 
 	/* Back pointer */
 	unsigned int comefrom;
@@ -149,9 +149,9 @@ struct ipt_entry {
 
 /* ICMP matching stuff */
 struct ipt_icmp {
-	u_int8_t type;				/* type to match */
-	u_int8_t code[2];			/* range of code */
-	u_int8_t invflags;			/* Inverse flags */
+	__u8 type;				/* type to match */
+	__u8 code[2];				/* range of code */
+	__u8 invflags;				/* Inverse flags */
 };
 
 /* Values for "inv" field for struct ipt_icmp. */
@@ -288,8 +288,8 @@ extern unsigned int ipt_do_table(struct sk_buff *skb,
 struct compat_ipt_entry {
 	struct ipt_ip ip;
 	compat_uint_t nfcache;
-	u_int16_t target_offset;
-	u_int16_t next_offset;
+	__u16 target_offset;
+	__u16 next_offset;
 	compat_uint_t comefrom;
 	struct compat_xt_counters counters;
 	unsigned char elems[0];
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index c9784f7..f549adc 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -81,14 +81,14 @@ struct ip6t_ip6 {
 	 *   MH do not match any packets.
 	 * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol.
 	 */
-	u_int16_t proto;
+	__u16 proto;
 	/* TOS to match iff flags & IP6T_F_TOS */
-	u_int8_t tos;
+	__u8 tos;
 
 	/* Flags word */
-	u_int8_t flags;
+	__u8 flags;
 	/* Inverse flags */
-	u_int8_t invflags;
+	__u8 invflags;
 };
 
 /* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */
@@ -118,9 +118,9 @@ struct ip6t_entry {
 	unsigned int nfcache;
 
 	/* Size of ipt_entry + matches */
-	u_int16_t target_offset;
+	__u16 target_offset;
 	/* Size of ipt_entry + matches + target */
-	u_int16_t next_offset;
+	__u16 next_offset;
 
 	/* Back pointer */
 	unsigned int comefrom;
@@ -186,9 +186,9 @@ struct ip6t_error {
 
 /* ICMP matching stuff */
 struct ip6t_icmp {
-	u_int8_t type;				/* type to match */
-	u_int8_t code[2];			/* range of code */
-	u_int8_t invflags;			/* Inverse flags */
+	__u8 type;				/* type to match */
+	__u8 code[2];				/* range of code */
+	__u8 invflags;				/* Inverse flags */
 };
 
 /* Values for "inv" field for struct ipt_icmp. */
@@ -298,8 +298,8 @@ extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset,
 struct compat_ip6t_entry {
 	struct ip6t_ip6 ipv6;
 	compat_uint_t nfcache;
-	u_int16_t target_offset;
-	u_int16_t next_offset;
+	__u16 target_offset;
+	__u16 next_offset;
 	compat_uint_t comefrom;
 	struct compat_xt_counters counters;
 	unsigned char elems[0];
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 07/10] headers, tipc: Add missing #include to <linux/tipc_config.h> for userland
From: Ben Hutchings @ 2011-08-25  4:45 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Jon Maloy, Allan Stephens, tipc-discussion
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 652 bytes --]

<linux/tipc_config.h> defines inline functions using ntohs() etc.
For userland these are defined in <arpa/inet.h>.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/tipc_config.h |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
index 0db2395..9730b0e 100644
--- a/include/linux/tipc_config.h
+++ b/include/linux/tipc_config.h
@@ -41,6 +41,10 @@
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
+#ifndef __KERNEL__
+#include <arpa/inet.h> /* for ntohs etc. */
+#endif
+
 /*
  * Configuration
  *
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 08/10] headers, netfilter: Add missing #include <limits.h> for userland
From: Ben Hutchings @ 2011-08-25  4:45 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Patrick McHardy, netfilter-devel
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 1623 bytes --]

Various headers use INT_MIN and INT_MAX, which are defined for
userland in <limits.h>.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter_decnet.h |    3 +++
 include/linux/netfilter_ipv4.h   |    3 +++
 include/linux/netfilter_ipv6.h   |    3 +++
 3 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h
index 6f42536..0b09732 100644
--- a/include/linux/netfilter_decnet.h
+++ b/include/linux/netfilter_decnet.h
@@ -11,6 +11,9 @@
 
 /* only for userspace compatibility */
 #ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
 /* IP Cache bits. */
 /* Src IP address. */
 #define NFC_DN_SRC		0x0001
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index 29c7727..fa0946c 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -9,6 +9,9 @@
 
 /* only for userspace compatibility */
 #ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
 /* IP Cache bits. */
 /* Src IP address. */
 #define NFC_IP_SRC		0x0001
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 1f7e300..57c0251 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -12,6 +12,9 @@
 
 /* only for userspace compatibility */
 #ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
 /* IP Cache bits. */
 /* Src IP address. */
 #define NFC_IP6_SRC              0x0001
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 09/10] headers, xtables: Add missing #include <linux/netfilter.h>
From: Ben Hutchings @ 2011-08-25  4:45 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Patrick McHardy, netfilter-devel
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 1612 bytes --]

Various headers use union nf_inet_addr, defined in <linux/netfilter.h>.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter/xt_connlimit.h |    1 +
 include/linux/netfilter/xt_conntrack.h |    1 +
 include/linux/netfilter/xt_iprange.h   |    1 +
 3 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h
index 0ca66e9..d1366f0 100644
--- a/include/linux/netfilter/xt_connlimit.h
+++ b/include/linux/netfilter/xt_connlimit.h
@@ -2,6 +2,7 @@
 #define _XT_CONNLIMIT_H
 
 #include <linux/types.h>
+#include <linux/netfilter.h>
 
 struct xt_connlimit_data;
 
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 74b904d..e3c041d 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -6,6 +6,7 @@
 #define _XT_CONNTRACK_H
 
 #include <linux/types.h>
+#include <linux/netfilter.h>
 #include <linux/netfilter/nf_conntrack_tuple_common.h>
 
 #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
diff --git a/include/linux/netfilter/xt_iprange.h b/include/linux/netfilter/xt_iprange.h
index c1f21a7..25fd7cf 100644
--- a/include/linux/netfilter/xt_iprange.h
+++ b/include/linux/netfilter/xt_iprange.h
@@ -2,6 +2,7 @@
 #define _LINUX_NETFILTER_XT_IPRANGE_H 1
 
 #include <linux/types.h>
+#include <linux/netfilter.h>
 
 enum {
 	IPRANGE_SRC     = 1 << 0,	/* match source IP address */
-- 
1.7.5.4




[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* [PATCH net-next v2 10/10] headers, can: Add missing #include to <linux/can/bcm.h>
From: Ben Hutchings @ 2011-08-25  4:46 UTC (permalink / raw)
  To: David Miller; +Cc: netdev, Oliver Hartkopp, Urs Thuermann
In-Reply-To: <1314247131.27179.116.camel@deadeye>

[-- Attachment #1: Type: text/plain, Size: 615 bytes --]

<linux/can/bcm.h> uses type canid_t, defined in <linux/can.h>.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 include/linux/can/bcm.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h
index 1432b27..e96154d 100644
--- a/include/linux/can/bcm.h
+++ b/include/linux/can/bcm.h
@@ -15,6 +15,7 @@
 #define CAN_BCM_H
 
 #include <linux/types.h>
+#include <linux/can.h>
 
 /**
  * struct bcm_msg_head - head of messages to/from the broadcast manager
-- 
1.7.5.4



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

^ permalink raw reply related

* Re: [omega-g1:11110] Re: [PATCH] net: configurable sysctl parameter "net.core.tcp_lowat" for sk_stream_min_wspace()
From: Jun.Kondo @ 2011-08-25  4:46 UTC (permalink / raw)
  To: David Miller
  Cc: linux-kernel, omega-g1, notsuki, motokazu.kozaki, htaira, netdev,
	tomohiko.takahashi, kotaro.sakai, ken.sugawara
In-Reply-To: <20110822.113544.28950168095176936.davem@davemloft.net>

Currently, once the transmission buffer becomes full, it is not
possible to write again unless there is one third of free space
in the transmission buffer.

Our modification request is not intending to change the behavior
of the OS itself, but making the value "one third" to be
configurable, not fixed.

Thus it would be still possible to set the value to 1/3.

So, could you please tell us why it is not acceptable to make
it configurable, and what is the persistence with the value of
1/3?

^ permalink raw reply

* [net-next 00/10][pull request] Complete drivers/net/ move
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo

The following series moves the FDDI, PPP, HIPPI, PLIP, SLIP and the cleanup
of the drivers/net/ Kconfig & Makefile's.  This series in addition moves
the 2 remaining drivers in drivers/net/pcmcia/ into their respective
directories (arcnet & tokenring).  The last remaining change is to
make the all the "new" Kconfig options introduced by the Ethernet
drivers move to yes, so that current defconfig's will compile the expected
drivers.
 
v2- remove the changes for FDDI, HIPPI, PPP, etc Kconfig from menuconfig back
to config and used tristate instead of bool.  Apparently some configs load
FDDI and others as a module.
v3- Fix compile issues exposed by the driver move where local headers were
included with the incorrect path.
v4- Fixed PPP/SHLC compile issue.  Removed the added dependency to PPP and SLHC
which caused compile issues.
 
The following are changes since commit 0856a304091b33a8e8f9f9c98e776f425af2b625:
  Scm: Remove unnecessary pid & credential references in Unix socket's send and receive path
and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master

Jeff Kirsher (10):
  fddi: Move the FDDI drivers
  skfp: Fix SysKonnect FDDI driver compile issues
  ppp: Move the PPP drivers
  hippi: Move the HIPPI driver
  plip: Move the PLIP driver
  slip: Move the SLIP drivers
  ixbmtr_cs: Move the IBM PCMCIA Token Ring driver
  com20020_cs: Move the PCMCIA Arcnet driver
  drivers/net: Kconfig & Makefile cleanup
  drivers/net/ethernet/*: Enabled vendor Kconfig options

 MAINTAINERS                                  |   11 +-
 drivers/net/Kconfig                          |  640 ++++++--------------------
 drivers/net/Makefile                         |   84 ++--
 drivers/net/arcnet/Kconfig                   |   14 +-
 drivers/net/arcnet/Makefile                  |    1 +
 drivers/net/{pcmcia => arcnet}/com20020_cs.c |    0
 drivers/net/ethernet/3com/Kconfig            |    1 +
 drivers/net/ethernet/8390/Kconfig            |    1 +
 drivers/net/ethernet/adaptec/Kconfig         |    1 +
 drivers/net/ethernet/alteon/Kconfig          |    1 +
 drivers/net/ethernet/amd/Kconfig             |    1 +
 drivers/net/ethernet/apple/Kconfig           |    1 +
 drivers/net/ethernet/atheros/Kconfig         |    1 +
 drivers/net/ethernet/broadcom/Kconfig        |    1 +
 drivers/net/ethernet/brocade/Kconfig         |    1 +
 drivers/net/ethernet/chelsio/Kconfig         |    1 +
 drivers/net/ethernet/cirrus/Kconfig          |    1 +
 drivers/net/ethernet/cisco/Kconfig           |    1 +
 drivers/net/ethernet/dec/Kconfig             |    1 +
 drivers/net/ethernet/dlink/Kconfig           |    1 +
 drivers/net/ethernet/emulex/Kconfig          |    1 +
 drivers/net/ethernet/faraday/Kconfig         |    1 +
 drivers/net/ethernet/freescale/Kconfig       |    1 +
 drivers/net/ethernet/fujitsu/Kconfig         |    1 +
 drivers/net/ethernet/hp/Kconfig              |    1 +
 drivers/net/ethernet/i825xx/Kconfig          |    1 +
 drivers/net/ethernet/ibm/Kconfig             |    1 +
 drivers/net/ethernet/intel/Kconfig           |    1 +
 drivers/net/ethernet/marvell/Kconfig         |    1 +
 drivers/net/ethernet/mellanox/Kconfig        |    1 +
 drivers/net/ethernet/micrel/Kconfig          |    1 +
 drivers/net/ethernet/microchip/Kconfig       |    1 +
 drivers/net/ethernet/myricom/Kconfig         |    1 +
 drivers/net/ethernet/natsemi/Kconfig         |    1 +
 drivers/net/ethernet/neterion/Kconfig        |    1 +
 drivers/net/ethernet/nuvoton/Kconfig         |    1 +
 drivers/net/ethernet/nvidia/Kconfig          |    1 +
 drivers/net/ethernet/oki-semi/Kconfig        |    1 +
 drivers/net/ethernet/pasemi/Kconfig          |    1 +
 drivers/net/ethernet/qlogic/Kconfig          |    1 +
 drivers/net/ethernet/racal/Kconfig           |    1 +
 drivers/net/ethernet/rdc/Kconfig             |    1 +
 drivers/net/ethernet/realtek/Kconfig         |    1 +
 drivers/net/ethernet/seeq/Kconfig            |    1 +
 drivers/net/ethernet/sgi/Kconfig             |    1 +
 drivers/net/ethernet/sis/Kconfig             |    1 +
 drivers/net/ethernet/smsc/Kconfig            |    1 +
 drivers/net/ethernet/stmicro/Kconfig         |    1 +
 drivers/net/ethernet/sun/Kconfig             |    1 +
 drivers/net/ethernet/tehuti/Kconfig          |    1 +
 drivers/net/ethernet/ti/Kconfig              |    1 +
 drivers/net/ethernet/toshiba/Kconfig         |    1 +
 drivers/net/ethernet/tundra/Kconfig          |    1 +
 drivers/net/ethernet/via/Kconfig             |    1 +
 drivers/net/ethernet/xilinx/Kconfig          |    1 +
 drivers/net/ethernet/xircom/Kconfig          |    1 +
 drivers/net/ethernet/xscale/Kconfig          |    1 +
 drivers/net/fddi/Kconfig                     |   77 +++
 drivers/net/fddi/Makefile                    |    6 +
 drivers/net/{ => fddi}/defxx.c               |    0
 drivers/net/{ => fddi}/defxx.h               |    0
 drivers/net/{ => fddi}/skfp/Makefile         |    0
 drivers/net/{ => fddi}/skfp/cfm.c            |    0
 drivers/net/{ => fddi}/skfp/drvfbi.c         |    0
 drivers/net/{ => fddi}/skfp/ecm.c            |    0
 drivers/net/{ => fddi}/skfp/ess.c            |    0
 drivers/net/{ => fddi}/skfp/fplustm.c        |    0
 drivers/net/{ => fddi}/skfp/h/cmtdef.h       |    4 +-
 drivers/net/{ => fddi}/skfp/h/fddi.h         |    0
 drivers/net/{ => fddi}/skfp/h/fddimib.h      |    0
 drivers/net/{ => fddi}/skfp/h/fplustm.h      |    0
 drivers/net/{ => fddi}/skfp/h/hwmtm.h        |    2 +-
 drivers/net/{ => fddi}/skfp/h/mbuf.h         |    0
 drivers/net/{ => fddi}/skfp/h/osdef1st.h     |    0
 drivers/net/{ => fddi}/skfp/h/sba.h          |    4 +-
 drivers/net/{ => fddi}/skfp/h/sba_def.h      |    0
 drivers/net/{ => fddi}/skfp/h/skfbi.h        |    0
 drivers/net/{ => fddi}/skfp/h/skfbiinc.h     |    2 +-
 drivers/net/{ => fddi}/skfp/h/smc.h          |   14 +-
 drivers/net/{ => fddi}/skfp/h/smt.h          |    0
 drivers/net/{ => fddi}/skfp/h/smt_p.h        |    0
 drivers/net/{ => fddi}/skfp/h/smtstate.h     |    0
 drivers/net/{ => fddi}/skfp/h/supern_2.h     |    0
 drivers/net/{ => fddi}/skfp/h/targethw.h     |    6 +-
 drivers/net/{ => fddi}/skfp/h/targetos.h     |    2 +-
 drivers/net/{ => fddi}/skfp/h/types.h        |    0
 drivers/net/{ => fddi}/skfp/hwmtm.c          |    0
 drivers/net/{ => fddi}/skfp/hwt.c            |    0
 drivers/net/{ => fddi}/skfp/pcmplc.c         |    0
 drivers/net/{ => fddi}/skfp/pmf.c            |    0
 drivers/net/{ => fddi}/skfp/queue.c          |    0
 drivers/net/{ => fddi}/skfp/rmt.c            |    0
 drivers/net/{ => fddi}/skfp/skfddi.c         |    0
 drivers/net/{ => fddi}/skfp/smt.c            |    0
 drivers/net/{ => fddi}/skfp/smtdef.c         |    0
 drivers/net/{ => fddi}/skfp/smtinit.c        |    0
 drivers/net/{ => fddi}/skfp/smttimer.c       |    0
 drivers/net/{ => fddi}/skfp/srf.c            |    0
 drivers/net/hippi/Kconfig                    |   39 ++
 drivers/net/hippi/Makefile                   |    5 +
 drivers/net/{ => hippi}/rrunner.c            |    0
 drivers/net/{ => hippi}/rrunner.h            |    0
 drivers/net/pcmcia/Kconfig                   |   45 --
 drivers/net/pcmcia/Makefile                  |    8 -
 drivers/net/phy/Kconfig                      |    2 +-
 drivers/net/plip/Kconfig                     |   38 ++
 drivers/net/plip/Makefile                    |    5 +
 drivers/net/{ => plip}/plip.c                |    0
 drivers/net/ppp/Kconfig                      |  175 +++++++
 drivers/net/ppp/Makefile                     |   13 +
 drivers/net/{ => ppp}/bsd_comp.c             |    0
 drivers/net/{ => ppp}/ppp_async.c            |    0
 drivers/net/{ => ppp}/ppp_deflate.c          |    0
 drivers/net/{ => ppp}/ppp_generic.c          |    0
 drivers/net/{ => ppp}/ppp_mppe.c             |    0
 drivers/net/{ => ppp}/ppp_mppe.h             |    0
 drivers/net/{ => ppp}/ppp_synctty.c          |    0
 drivers/net/{ => ppp}/pppoe.c                |    0
 drivers/net/{ => ppp}/pppox.c                |    0
 drivers/net/{ => ppp}/pptp.c                 |    0
 drivers/net/slip/Kconfig                     |   79 ++++
 drivers/net/slip/Makefile                    |    6 +
 drivers/net/{ => slip}/slhc.c                |    0
 drivers/net/{ => slip}/slip.c                |    0
 drivers/net/{ => slip}/slip.h                |    0
 drivers/net/tokenring/Kconfig                |   15 +-
 drivers/net/tokenring/Makefile               |   21 +-
 drivers/net/{pcmcia => tokenring}/ibmtr_cs.c |    2 +-
 128 files changed, 726 insertions(+), 645 deletions(-)
 rename drivers/net/{pcmcia => arcnet}/com20020_cs.c (100%)
 create mode 100644 drivers/net/fddi/Kconfig
 create mode 100644 drivers/net/fddi/Makefile
 rename drivers/net/{ => fddi}/defxx.c (100%)
 rename drivers/net/{ => fddi}/defxx.h (100%)
 rename drivers/net/{ => fddi}/skfp/Makefile (100%)
 rename drivers/net/{ => fddi}/skfp/cfm.c (100%)
 rename drivers/net/{ => fddi}/skfp/drvfbi.c (100%)
 rename drivers/net/{ => fddi}/skfp/ecm.c (100%)
 rename drivers/net/{ => fddi}/skfp/ess.c (100%)
 rename drivers/net/{ => fddi}/skfp/fplustm.c (100%)
 rename drivers/net/{ => fddi}/skfp/h/cmtdef.h (99%)
 rename drivers/net/{ => fddi}/skfp/h/fddi.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/fddimib.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/fplustm.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/hwmtm.h (99%)
 rename drivers/net/{ => fddi}/skfp/h/mbuf.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/osdef1st.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/sba.h (98%)
 rename drivers/net/{ => fddi}/skfp/h/sba_def.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/skfbi.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/skfbiinc.h (99%)
 rename drivers/net/{ => fddi}/skfp/h/smc.h (98%)
 rename drivers/net/{ => fddi}/skfp/h/smt.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/smt_p.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/smtstate.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/supern_2.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/targethw.h (98%)
 rename drivers/net/{ => fddi}/skfp/h/targetos.h (99%)
 rename drivers/net/{ => fddi}/skfp/h/types.h (100%)
 rename drivers/net/{ => fddi}/skfp/hwmtm.c (100%)
 rename drivers/net/{ => fddi}/skfp/hwt.c (100%)
 rename drivers/net/{ => fddi}/skfp/pcmplc.c (100%)
 rename drivers/net/{ => fddi}/skfp/pmf.c (100%)
 rename drivers/net/{ => fddi}/skfp/queue.c (100%)
 rename drivers/net/{ => fddi}/skfp/rmt.c (100%)
 rename drivers/net/{ => fddi}/skfp/skfddi.c (100%)
 rename drivers/net/{ => fddi}/skfp/smt.c (100%)
 rename drivers/net/{ => fddi}/skfp/smtdef.c (100%)
 rename drivers/net/{ => fddi}/skfp/smtinit.c (100%)
 rename drivers/net/{ => fddi}/skfp/smttimer.c (100%)
 rename drivers/net/{ => fddi}/skfp/srf.c (100%)
 create mode 100644 drivers/net/hippi/Kconfig
 create mode 100644 drivers/net/hippi/Makefile
 rename drivers/net/{ => hippi}/rrunner.c (100%)
 rename drivers/net/{ => hippi}/rrunner.h (100%)
 delete mode 100644 drivers/net/pcmcia/Kconfig
 delete mode 100644 drivers/net/pcmcia/Makefile
 create mode 100644 drivers/net/plip/Kconfig
 create mode 100644 drivers/net/plip/Makefile
 rename drivers/net/{ => plip}/plip.c (100%)
 create mode 100644 drivers/net/ppp/Kconfig
 create mode 100644 drivers/net/ppp/Makefile
 rename drivers/net/{ => ppp}/bsd_comp.c (100%)
 rename drivers/net/{ => ppp}/ppp_async.c (100%)
 rename drivers/net/{ => ppp}/ppp_deflate.c (100%)
 rename drivers/net/{ => ppp}/ppp_generic.c (100%)
 rename drivers/net/{ => ppp}/ppp_mppe.c (100%)
 rename drivers/net/{ => ppp}/ppp_mppe.h (100%)
 rename drivers/net/{ => ppp}/ppp_synctty.c (100%)
 rename drivers/net/{ => ppp}/pppoe.c (100%)
 rename drivers/net/{ => ppp}/pppox.c (100%)
 rename drivers/net/{ => ppp}/pptp.c (100%)
 create mode 100644 drivers/net/slip/Kconfig
 create mode 100644 drivers/net/slip/Makefile
 rename drivers/net/{ => slip}/slhc.c (100%)
 rename drivers/net/{ => slip}/slip.c (100%)
 rename drivers/net/{ => slip}/slip.h (100%)
 rename drivers/net/{pcmcia => tokenring}/ibmtr_cs.c (99%)

-- 
1.7.6

^ permalink raw reply

* [net-next 02/10] skfp: Fix SysKonnect FDDI driver compile issues
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Maciej W. Rozycki, Christoph Goos,
	linux
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

After moving the skfp driver, issues with the #include pathing to
their locel headers was somehow exposed.  Several headers had the
incorrect path, so they were not able to be found during compile
time.

This patch fixes up the path issues to the local headers that need
to be included.

CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Christoph Goos <cgoos@syskonnect.de>
CC: <linux@syskonnect.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/fddi/skfp/h/cmtdef.h   |    4 ++--
 drivers/net/fddi/skfp/h/hwmtm.h    |    2 +-
 drivers/net/fddi/skfp/h/sba.h      |    4 ++--
 drivers/net/fddi/skfp/h/skfbiinc.h |    2 +-
 drivers/net/fddi/skfp/h/smc.h      |   14 +++++++-------
 drivers/net/fddi/skfp/h/targethw.h |    6 +++---
 drivers/net/fddi/skfp/h/targetos.h |    2 +-
 7 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/fddi/skfp/h/cmtdef.h b/drivers/net/fddi/skfp/h/cmtdef.h
index 5a6c612..f5bc90f 100644
--- a/drivers/net/fddi/skfp/h/cmtdef.h
+++ b/drivers/net/fddi/skfp/h/cmtdef.h
@@ -477,8 +477,8 @@ struct s_plc {
 /*
  * function prototypes
  */
-#include "h/mbuf.h"	/* Type definitions for MBUFs */
-#include "h/smtstate.h"	/* struct smt_state */
+#include "mbuf.h"	/* Type definitions for MBUFs */
+#include "smtstate.h"	/* struct smt_state */
 
 void hwt_restart(struct s_smc *smc);	/* hwt.c */
 SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,
diff --git a/drivers/net/fddi/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h
index e1a7e5f..5924d42 100644
--- a/drivers/net/fddi/skfp/h/hwmtm.h
+++ b/drivers/net/fddi/skfp/h/hwmtm.h
@@ -15,7 +15,7 @@
 #ifndef	_HWM_
 #define	_HWM_
 
-#include "h/mbuf.h"
+#include "mbuf.h"
 
 /*
  * MACRO for DMA synchronization:
diff --git a/drivers/net/fddi/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h
index 638cf02..35ddb44 100644
--- a/drivers/net/fddi/skfp/h/sba.h
+++ b/drivers/net/fddi/skfp/h/sba.h
@@ -19,8 +19,8 @@
 #ifndef _SBA_
 #define _SBA_
 
-#include "h/mbuf.h"
-#include "h/sba_def.h"
+#include "mbuf.h"
+#include "sba_def.h"
 
 #ifdef	SBA
 
diff --git a/drivers/net/fddi/skfp/h/skfbiinc.h b/drivers/net/fddi/skfp/h/skfbiinc.h
index ac2d719..ce72557 100644
--- a/drivers/net/fddi/skfp/h/skfbiinc.h
+++ b/drivers/net/fddi/skfp/h/skfbiinc.h
@@ -15,7 +15,7 @@
 #ifndef	_SKFBIINC_
 #define _SKFBIINC_
 
-#include "h/supern_2.h"
+#include "supern_2.h"
 
 /*
  * special defines for use into .asm files
diff --git a/drivers/net/fddi/skfp/h/smc.h b/drivers/net/fddi/skfp/h/smc.h
index c774a95..3ca308b 100644
--- a/drivers/net/fddi/skfp/h/smc.h
+++ b/drivers/net/fddi/skfp/h/smc.h
@@ -38,18 +38,18 @@
  *	fddi.h
  */
 #ifdef	OSDEF
-#include "h/osdef1st.h"
+#include "osdef1st.h"
 #endif	/* OSDEF */
 #ifdef	OEM_CONCEPT
 #include "oemdef.h"
 #endif	/* OEM_CONCEPT */
-#include "h/smt.h"
-#include "h/cmtdef.h"
-#include "h/fddimib.h"
-#include "h/targethw.h"		/* all target hw dependencies */
-#include "h/targetos.h"		/* all target os dependencies */
+#include "smt.h"
+#include "cmtdef.h"
+#include "fddimib.h"
+#include "targethw.h"		/* all target hw dependencies */
+#include "targetos.h"		/* all target os dependencies */
 #ifdef	ESS
-#include "h/sba.h"
+#include "sba.h"
 #endif
 
 /*
diff --git a/drivers/net/fddi/skfp/h/targethw.h b/drivers/net/fddi/skfp/h/targethw.h
index 626dc72..842a690 100644
--- a/drivers/net/fddi/skfp/h/targethw.h
+++ b/drivers/net/fddi/skfp/h/targethw.h
@@ -25,11 +25,11 @@
 #define SK_ML_ID_2	0x30
 #endif
 
-#include	"h/skfbi.h"
+#include	"skfbi.h"
 #ifndef TAG_MODE	
-#include	"h/fplus.h"
+#include	"fplus.h"
 #else
-#include	"h/fplustm.h"
+#include	"fplustm.h"
 #endif
 
 #ifndef	HW_PTR
diff --git a/drivers/net/fddi/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h
index 5d940e7..53bacc1 100644
--- a/drivers/net/fddi/skfp/h/targetos.h
+++ b/drivers/net/fddi/skfp/h/targetos.h
@@ -58,7 +58,7 @@
 #define	ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0))))
 #endif
 
-#include "h/hwmtm.h"
+#include "hwmtm.h"
 
 #define TRUE  1
 #define FALSE 0
-- 
1.7.6

^ permalink raw reply related

* [net-next 01/10] fddi: Move the FDDI drivers
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Maciej W. Rozycki, Christoph Goos,
	linux
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the FDDI drivers into drivers/net/fddi/ and make the
necessary Kconfig and Makefile changes.

CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Christoph Goos <cgoos@syskonnect.de>
CC: <linux@syskonnect.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                              |    2 +-
 drivers/net/Kconfig                      |   72 +---------------------------
 drivers/net/Makefile                     |    3 +-
 drivers/net/fddi/Kconfig                 |   77 ++++++++++++++++++++++++++++++
 drivers/net/fddi/Makefile                |    6 ++
 drivers/net/{ => fddi}/defxx.c           |    0
 drivers/net/{ => fddi}/defxx.h           |    0
 drivers/net/{ => fddi}/skfp/Makefile     |    0
 drivers/net/{ => fddi}/skfp/cfm.c        |    0
 drivers/net/{ => fddi}/skfp/drvfbi.c     |    0
 drivers/net/{ => fddi}/skfp/ecm.c        |    0
 drivers/net/{ => fddi}/skfp/ess.c        |    0
 drivers/net/{ => fddi}/skfp/fplustm.c    |    0
 drivers/net/{ => fddi}/skfp/h/cmtdef.h   |    0
 drivers/net/{ => fddi}/skfp/h/fddi.h     |    0
 drivers/net/{ => fddi}/skfp/h/fddimib.h  |    0
 drivers/net/{ => fddi}/skfp/h/fplustm.h  |    0
 drivers/net/{ => fddi}/skfp/h/hwmtm.h    |    0
 drivers/net/{ => fddi}/skfp/h/mbuf.h     |    0
 drivers/net/{ => fddi}/skfp/h/osdef1st.h |    0
 drivers/net/{ => fddi}/skfp/h/sba.h      |    0
 drivers/net/{ => fddi}/skfp/h/sba_def.h  |    0
 drivers/net/{ => fddi}/skfp/h/skfbi.h    |    0
 drivers/net/{ => fddi}/skfp/h/skfbiinc.h |    0
 drivers/net/{ => fddi}/skfp/h/smc.h      |    0
 drivers/net/{ => fddi}/skfp/h/smt.h      |    0
 drivers/net/{ => fddi}/skfp/h/smt_p.h    |    0
 drivers/net/{ => fddi}/skfp/h/smtstate.h |    0
 drivers/net/{ => fddi}/skfp/h/supern_2.h |    0
 drivers/net/{ => fddi}/skfp/h/targethw.h |    0
 drivers/net/{ => fddi}/skfp/h/targetos.h |    0
 drivers/net/{ => fddi}/skfp/h/types.h    |    0
 drivers/net/{ => fddi}/skfp/hwmtm.c      |    0
 drivers/net/{ => fddi}/skfp/hwt.c        |    0
 drivers/net/{ => fddi}/skfp/pcmplc.c     |    0
 drivers/net/{ => fddi}/skfp/pmf.c        |    0
 drivers/net/{ => fddi}/skfp/queue.c      |    0
 drivers/net/{ => fddi}/skfp/rmt.c        |    0
 drivers/net/{ => fddi}/skfp/skfddi.c     |    0
 drivers/net/{ => fddi}/skfp/smt.c        |    0
 drivers/net/{ => fddi}/skfp/smtdef.c     |    0
 drivers/net/{ => fddi}/skfp/smtinit.c    |    0
 drivers/net/{ => fddi}/skfp/smttimer.c   |    0
 drivers/net/{ => fddi}/skfp/srf.c        |    0
 44 files changed, 87 insertions(+), 73 deletions(-)
 create mode 100644 drivers/net/fddi/Kconfig
 create mode 100644 drivers/net/fddi/Makefile
 rename drivers/net/{ => fddi}/defxx.c (100%)
 rename drivers/net/{ => fddi}/defxx.h (100%)
 rename drivers/net/{ => fddi}/skfp/Makefile (100%)
 rename drivers/net/{ => fddi}/skfp/cfm.c (100%)
 rename drivers/net/{ => fddi}/skfp/drvfbi.c (100%)
 rename drivers/net/{ => fddi}/skfp/ecm.c (100%)
 rename drivers/net/{ => fddi}/skfp/ess.c (100%)
 rename drivers/net/{ => fddi}/skfp/fplustm.c (100%)
 rename drivers/net/{ => fddi}/skfp/h/cmtdef.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/fddi.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/fddimib.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/fplustm.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/hwmtm.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/mbuf.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/osdef1st.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/sba.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/sba_def.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/skfbi.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/skfbiinc.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/smc.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/smt.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/smt_p.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/smtstate.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/supern_2.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/targethw.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/targetos.h (100%)
 rename drivers/net/{ => fddi}/skfp/h/types.h (100%)
 rename drivers/net/{ => fddi}/skfp/hwmtm.c (100%)
 rename drivers/net/{ => fddi}/skfp/hwt.c (100%)
 rename drivers/net/{ => fddi}/skfp/pcmplc.c (100%)
 rename drivers/net/{ => fddi}/skfp/pmf.c (100%)
 rename drivers/net/{ => fddi}/skfp/queue.c (100%)
 rename drivers/net/{ => fddi}/skfp/rmt.c (100%)
 rename drivers/net/{ => fddi}/skfp/skfddi.c (100%)
 rename drivers/net/{ => fddi}/skfp/smt.c (100%)
 rename drivers/net/{ => fddi}/skfp/smtdef.c (100%)
 rename drivers/net/{ => fddi}/skfp/smtinit.c (100%)
 rename drivers/net/{ => fddi}/skfp/smttimer.c (100%)
 rename drivers/net/{ => fddi}/skfp/srf.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index d32e1ca..2777088 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2113,7 +2113,7 @@ F:	net/decnet/
 DEFXX FDDI NETWORK DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
-F:	drivers/net/defxx.*
+F:	drivers/net/fddi/defxx.*
 
 DELL LAPTOP DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ef6b6be..7bdc22b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -195,6 +195,8 @@ config SUNGEM_PHY
 
 source "drivers/net/ethernet/Kconfig"
 
+source "drivers/net/fddi/Kconfig"
+
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
@@ -268,76 +270,6 @@ config RIONET_RX_SIZE
 	depends on RIONET
 	default "128"
 
-config FDDI
-	tristate "FDDI driver support"
-	depends on (PCI || EISA || TC)
-	help
-	  Fiber Distributed Data Interface is a high speed local area network
-	  design; essentially a replacement for high speed Ethernet. FDDI can
-	  run over copper or fiber. If you are connected to such a network and
-	  want a driver for the FDDI card in your computer, say Y here (and
-	  then also Y to the driver for your FDDI card, below). Most people
-	  will say N.
-
-config DEFXX
-	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
-	depends on FDDI && (PCI || EISA || TC)
-	---help---
-	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
-	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
-	  to a local FDDI network.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called defxx.  If unsure, say N.
-
-config DEFXX_MMIO
-	bool
-	prompt "Use MMIO instead of PIO" if PCI || EISA
-	depends on DEFXX
-	default n if PCI || EISA
-	default y
-	---help---
-	  This instructs the driver to use EISA or PCI memory-mapped I/O
-	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
-	  Enabling this gives an improvement in processing time in parts
-	  of the driver, but it may cause problems with EISA (DEFEA)
-	  adapters.  TURBOchannel does not have the concept of I/O ports,
-	  so MMIO is always used for these (DEFTA) adapters.
-
-	  If unsure, say N.
-
-config SKFP
-	tristate "SysKonnect FDDI PCI support"
-	depends on FDDI && PCI
-	select BITREVERSE
-	---help---
-	  Say Y here if you have a SysKonnect FDDI PCI adapter.
-	  The following adapters are supported by this driver:
-	  - SK-5521 (SK-NET FDDI-UP)
-	  - SK-5522 (SK-NET FDDI-UP DAS)
-	  - SK-5541 (SK-NET FDDI-FP)
-	  - SK-5543 (SK-NET FDDI-LP)
-	  - SK-5544 (SK-NET FDDI-LP DAS)
-	  - SK-5821 (SK-NET FDDI-UP64)
-	  - SK-5822 (SK-NET FDDI-UP64 DAS)
-	  - SK-5841 (SK-NET FDDI-FP64)
-	  - SK-5843 (SK-NET FDDI-LP64)
-	  - SK-5844 (SK-NET FDDI-LP64 DAS)
-	  - Netelligent 100 FDDI DAS Fibre SC
-	  - Netelligent 100 FDDI SAS Fibre SC
-	  - Netelligent 100 FDDI DAS UTP
-	  - Netelligent 100 FDDI SAS UTP
-	  - Netelligent 100 FDDI SAS Fibre MIC
-
-	  Read <file:Documentation/networking/skfp.txt> for information about
-	  the driver.
-
-	  Questions concerning this driver can be addressed to:
-	  <linux@syskonnect.de>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skfp.  This is recommended.
-
 config HIPPI
 	bool "HIPPI driver support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && INET && PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c33009b..3087b27 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
 #
 obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_RIONET) += rionet.o
 
 #
@@ -42,13 +41,13 @@ obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
+obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
new file mode 100644
index 0000000..3a424c8
--- /dev/null
+++ b/drivers/net/fddi/Kconfig
@@ -0,0 +1,77 @@
+#
+# FDDI network device configuration
+#
+
+config FDDI
+	tristate "FDDI driver support"
+	depends on PCI || EISA || TC
+	---help---
+	  Fiber Distributed Data Interface is a high speed local area network
+	  design; essentially a replacement for high speed Ethernet. FDDI can
+	  run over copper or fiber. If you are connected to such a network and
+	  want a driver for the FDDI card in your computer, say Y here (and
+	  then also Y to the driver for your FDDI card, below). Most people
+	  will say N.
+
+if FDDI
+
+config DEFXX
+	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+	depends on FDDI && (PCI || EISA || TC)
+	---help---
+	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
+	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+	  to a local FDDI network.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called defxx.  If unsure, say N.
+
+config DEFXX_MMIO
+	bool
+	prompt "Use MMIO instead of PIO" if PCI || EISA
+	depends on DEFXX
+	default n if PCI || EISA
+	default y
+	---help---
+	  This instructs the driver to use EISA or PCI memory-mapped I/O
+	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
+	  Enabling this gives an improvement in processing time in parts
+	  of the driver, but it may cause problems with EISA (DEFEA)
+	  adapters.  TURBOchannel does not have the concept of I/O ports,
+	  so MMIO is always used for these (DEFTA) adapters.
+
+	  If unsure, say N.
+
+config SKFP
+	tristate "SysKonnect FDDI PCI support"
+	depends on FDDI && PCI
+	select BITREVERSE
+	---help---
+	  Say Y here if you have a SysKonnect FDDI PCI adapter.
+	  The following adapters are supported by this driver:
+	  - SK-5521 (SK-NET FDDI-UP)
+	  - SK-5522 (SK-NET FDDI-UP DAS)
+	  - SK-5541 (SK-NET FDDI-FP)
+	  - SK-5543 (SK-NET FDDI-LP)
+	  - SK-5544 (SK-NET FDDI-LP DAS)
+	  - SK-5821 (SK-NET FDDI-UP64)
+	  - SK-5822 (SK-NET FDDI-UP64 DAS)
+	  - SK-5841 (SK-NET FDDI-FP64)
+	  - SK-5843 (SK-NET FDDI-LP64)
+	  - SK-5844 (SK-NET FDDI-LP64 DAS)
+	  - Netelligent 100 FDDI DAS Fibre SC
+	  - Netelligent 100 FDDI SAS Fibre SC
+	  - Netelligent 100 FDDI DAS UTP
+	  - Netelligent 100 FDDI SAS UTP
+	  - Netelligent 100 FDDI SAS Fibre MIC
+
+	  Read <file:Documentation/networking/skfp.txt> for information about
+	  the driver.
+
+	  Questions concerning this driver can be addressed to:
+	  <linux@syskonnect.de>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skfp.  This is recommended.
+
+endif # FDDI
diff --git a/drivers/net/fddi/Makefile b/drivers/net/fddi/Makefile
new file mode 100644
index 0000000..36da19c
--- /dev/null
+++ b/drivers/net/fddi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux FDDI network device drivers.
+#
+
+obj-$(CONFIG_DEFXX) += defxx.o
+obj-$(CONFIG_SKFP) += skfp/
diff --git a/drivers/net/defxx.c b/drivers/net/fddi/defxx.c
similarity index 100%
rename from drivers/net/defxx.c
rename to drivers/net/fddi/defxx.c
diff --git a/drivers/net/defxx.h b/drivers/net/fddi/defxx.h
similarity index 100%
rename from drivers/net/defxx.h
rename to drivers/net/fddi/defxx.h
diff --git a/drivers/net/skfp/Makefile b/drivers/net/fddi/skfp/Makefile
similarity index 100%
rename from drivers/net/skfp/Makefile
rename to drivers/net/fddi/skfp/Makefile
diff --git a/drivers/net/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c
similarity index 100%
rename from drivers/net/skfp/cfm.c
rename to drivers/net/fddi/skfp/cfm.c
diff --git a/drivers/net/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c
similarity index 100%
rename from drivers/net/skfp/drvfbi.c
rename to drivers/net/fddi/skfp/drvfbi.c
diff --git a/drivers/net/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c
similarity index 100%
rename from drivers/net/skfp/ecm.c
rename to drivers/net/fddi/skfp/ecm.c
diff --git a/drivers/net/skfp/ess.c b/drivers/net/fddi/skfp/ess.c
similarity index 100%
rename from drivers/net/skfp/ess.c
rename to drivers/net/fddi/skfp/ess.c
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c
similarity index 100%
rename from drivers/net/skfp/fplustm.c
rename to drivers/net/fddi/skfp/fplustm.c
diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/fddi/skfp/h/cmtdef.h
similarity index 100%
rename from drivers/net/skfp/h/cmtdef.h
rename to drivers/net/fddi/skfp/h/cmtdef.h
diff --git a/drivers/net/skfp/h/fddi.h b/drivers/net/fddi/skfp/h/fddi.h
similarity index 100%
rename from drivers/net/skfp/h/fddi.h
rename to drivers/net/fddi/skfp/h/fddi.h
diff --git a/drivers/net/skfp/h/fddimib.h b/drivers/net/fddi/skfp/h/fddimib.h
similarity index 100%
rename from drivers/net/skfp/h/fddimib.h
rename to drivers/net/fddi/skfp/h/fddimib.h
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/fddi/skfp/h/fplustm.h
similarity index 100%
rename from drivers/net/skfp/h/fplustm.h
rename to drivers/net/fddi/skfp/h/fplustm.h
diff --git a/drivers/net/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h
similarity index 100%
rename from drivers/net/skfp/h/hwmtm.h
rename to drivers/net/fddi/skfp/h/hwmtm.h
diff --git a/drivers/net/skfp/h/mbuf.h b/drivers/net/fddi/skfp/h/mbuf.h
similarity index 100%
rename from drivers/net/skfp/h/mbuf.h
rename to drivers/net/fddi/skfp/h/mbuf.h
diff --git a/drivers/net/skfp/h/osdef1st.h b/drivers/net/fddi/skfp/h/osdef1st.h
similarity index 100%
rename from drivers/net/skfp/h/osdef1st.h
rename to drivers/net/fddi/skfp/h/osdef1st.h
diff --git a/drivers/net/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h
similarity index 100%
rename from drivers/net/skfp/h/sba.h
rename to drivers/net/fddi/skfp/h/sba.h
diff --git a/drivers/net/skfp/h/sba_def.h b/drivers/net/fddi/skfp/h/sba_def.h
similarity index 100%
rename from drivers/net/skfp/h/sba_def.h
rename to drivers/net/fddi/skfp/h/sba_def.h
diff --git a/drivers/net/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h
similarity index 100%
rename from drivers/net/skfp/h/skfbi.h
rename to drivers/net/fddi/skfp/h/skfbi.h
diff --git a/drivers/net/skfp/h/skfbiinc.h b/drivers/net/fddi/skfp/h/skfbiinc.h
similarity index 100%
rename from drivers/net/skfp/h/skfbiinc.h
rename to drivers/net/fddi/skfp/h/skfbiinc.h
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/fddi/skfp/h/smc.h
similarity index 100%
rename from drivers/net/skfp/h/smc.h
rename to drivers/net/fddi/skfp/h/smc.h
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/fddi/skfp/h/smt.h
similarity index 100%
rename from drivers/net/skfp/h/smt.h
rename to drivers/net/fddi/skfp/h/smt.h
diff --git a/drivers/net/skfp/h/smt_p.h b/drivers/net/fddi/skfp/h/smt_p.h
similarity index 100%
rename from drivers/net/skfp/h/smt_p.h
rename to drivers/net/fddi/skfp/h/smt_p.h
diff --git a/drivers/net/skfp/h/smtstate.h b/drivers/net/fddi/skfp/h/smtstate.h
similarity index 100%
rename from drivers/net/skfp/h/smtstate.h
rename to drivers/net/fddi/skfp/h/smtstate.h
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/fddi/skfp/h/supern_2.h
similarity index 100%
rename from drivers/net/skfp/h/supern_2.h
rename to drivers/net/fddi/skfp/h/supern_2.h
diff --git a/drivers/net/skfp/h/targethw.h b/drivers/net/fddi/skfp/h/targethw.h
similarity index 100%
rename from drivers/net/skfp/h/targethw.h
rename to drivers/net/fddi/skfp/h/targethw.h
diff --git a/drivers/net/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h
similarity index 100%
rename from drivers/net/skfp/h/targetos.h
rename to drivers/net/fddi/skfp/h/targetos.h
diff --git a/drivers/net/skfp/h/types.h b/drivers/net/fddi/skfp/h/types.h
similarity index 100%
rename from drivers/net/skfp/h/types.h
rename to drivers/net/fddi/skfp/h/types.h
diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/fddi/skfp/hwmtm.c
similarity index 100%
rename from drivers/net/skfp/hwmtm.c
rename to drivers/net/fddi/skfp/hwmtm.c
diff --git a/drivers/net/skfp/hwt.c b/drivers/net/fddi/skfp/hwt.c
similarity index 100%
rename from drivers/net/skfp/hwt.c
rename to drivers/net/fddi/skfp/hwt.c
diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c
similarity index 100%
rename from drivers/net/skfp/pcmplc.c
rename to drivers/net/fddi/skfp/pcmplc.c
diff --git a/drivers/net/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c
similarity index 100%
rename from drivers/net/skfp/pmf.c
rename to drivers/net/fddi/skfp/pmf.c
diff --git a/drivers/net/skfp/queue.c b/drivers/net/fddi/skfp/queue.c
similarity index 100%
rename from drivers/net/skfp/queue.c
rename to drivers/net/fddi/skfp/queue.c
diff --git a/drivers/net/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c
similarity index 100%
rename from drivers/net/skfp/rmt.c
rename to drivers/net/fddi/skfp/rmt.c
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/fddi/skfp/skfddi.c
similarity index 100%
rename from drivers/net/skfp/skfddi.c
rename to drivers/net/fddi/skfp/skfddi.c
diff --git a/drivers/net/skfp/smt.c b/drivers/net/fddi/skfp/smt.c
similarity index 100%
rename from drivers/net/skfp/smt.c
rename to drivers/net/fddi/skfp/smt.c
diff --git a/drivers/net/skfp/smtdef.c b/drivers/net/fddi/skfp/smtdef.c
similarity index 100%
rename from drivers/net/skfp/smtdef.c
rename to drivers/net/fddi/skfp/smtdef.c
diff --git a/drivers/net/skfp/smtinit.c b/drivers/net/fddi/skfp/smtinit.c
similarity index 100%
rename from drivers/net/skfp/smtinit.c
rename to drivers/net/fddi/skfp/smtinit.c
diff --git a/drivers/net/skfp/smttimer.c b/drivers/net/fddi/skfp/smttimer.c
similarity index 100%
rename from drivers/net/skfp/smttimer.c
rename to drivers/net/fddi/skfp/smttimer.c
diff --git a/drivers/net/skfp/srf.c b/drivers/net/fddi/skfp/srf.c
similarity index 100%
rename from drivers/net/skfp/srf.c
rename to drivers/net/fddi/skfp/srf.c
-- 
1.7.6

^ permalink raw reply related

* [net-next 03/10] ppp: Move the PPP drivers
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, Paul Mackerras, Frank Cusack,
	Michal Ostrowski, Michal Ostrowski, Dmitry Kozlov
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the PPP drivers into drivers/net/ppp/ and make the
necessary Kconfig and Makefile changes.

CC: Paul Mackerras <paulus@samba.org>
CC: Frank Cusack <fcusack@fcusack.com>
CC: Michal Ostrowski <mostrows@speakeasy.net>
CC: Michal Ostrowski <mostrows@earthlink.net>
CC: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                         |    8 +-
 drivers/net/Kconfig                 |  170 +---------------------------------
 drivers/net/Makefile                |   10 +--
 drivers/net/ppp/Kconfig             |  175 +++++++++++++++++++++++++++++++++++
 drivers/net/ppp/Makefile            |   13 +++
 drivers/net/{ => ppp}/bsd_comp.c    |    0
 drivers/net/{ => ppp}/ppp_async.c   |    0
 drivers/net/{ => ppp}/ppp_deflate.c |    0
 drivers/net/{ => ppp}/ppp_generic.c |    0
 drivers/net/{ => ppp}/ppp_mppe.c    |    0
 drivers/net/{ => ppp}/ppp_mppe.h    |    0
 drivers/net/{ => ppp}/ppp_synctty.c |    0
 drivers/net/{ => ppp}/pppoe.c       |    0
 drivers/net/{ => ppp}/pppox.c       |    0
 drivers/net/{ => ppp}/pptp.c        |    0
 15 files changed, 195 insertions(+), 181 deletions(-)
 create mode 100644 drivers/net/ppp/Kconfig
 create mode 100644 drivers/net/ppp/Makefile
 rename drivers/net/{ => ppp}/bsd_comp.c (100%)
 rename drivers/net/{ => ppp}/ppp_async.c (100%)
 rename drivers/net/{ => ppp}/ppp_deflate.c (100%)
 rename drivers/net/{ => ppp}/ppp_generic.c (100%)
 rename drivers/net/{ => ppp}/ppp_mppe.c (100%)
 rename drivers/net/{ => ppp}/ppp_mppe.h (100%)
 rename drivers/net/{ => ppp}/ppp_synctty.c (100%)
 rename drivers/net/{ => ppp}/pppoe.c (100%)
 rename drivers/net/{ => ppp}/pppox.c (100%)
 rename drivers/net/{ => ppp}/pptp.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2777088..c5ec925 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5066,7 +5066,7 @@ PPP PROTOCOL DRIVERS AND COMPRESSORS
 M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ppp_*
+F:	drivers/net/ppp/ppp_*
 
 PPP OVER ATM (RFC 2364)
 M:	Mitchell Blank Jr <mitch@sfgoth.com>
@@ -5077,8 +5077,8 @@ F:	include/linux/atmppp.h
 PPP OVER ETHERNET
 M:	Michal Ostrowski <mostrows@earthlink.net>
 S:	Maintained
-F:	drivers/net/pppoe.c
-F:	drivers/net/pppox.c
+F:	drivers/net/ppp/pppoe.c
+F:	drivers/net/ppp/pppox.c
 
 PPP OVER L2TP
 M:	James Chapman <jchapman@katalix.com>
@@ -5099,7 +5099,7 @@ PPTP DRIVER
 M:	Dmitry Kozlov <xeb@mail.ru>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pptp.c
+F:	drivers/net/ppp/pptp.c
 W:	http://sourceforge.net/projects/accel-pptp
 
 PREEMPTIBLE KERNEL
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7bdc22b..c5e2a38 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -207,6 +207,8 @@ source "drivers/net/usb/Kconfig"
 
 source "drivers/net/pcmcia/Kconfig"
 
+source "drivers/net/ppp/Kconfig"
+
 source "drivers/net/wan/Kconfig"
 
 source "drivers/atm/Kconfig"
@@ -337,174 +339,6 @@ config PLIP
 	  will be called plip. If unsure, say Y or M, in case you buy
 	  a laptop later.
 
-config PPP
-	tristate "PPP (point-to-point protocol) support"
-	select SLHC
-	---help---
-	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
-	  the same purpose: sending Internet traffic over telephone (and other
-	  serial) lines.  Ask your access provider if they support it, because
-	  otherwise you can't use it; most Internet access providers these
-	  days support PPP rather than SLIP.
-
-	  To use PPP, you need an additional program called pppd as described
-	  in the PPP-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
-	  the version of pppd recommended in <file:Documentation/Changes>.
-	  The PPP option enlarges your kernel by about 16 KB.
-
-	  There are actually two versions of PPP: the traditional PPP for
-	  asynchronous lines, such as regular analog phone lines, and
-	  synchronous PPP which can be used over digital ISDN lines for
-	  example.  If you want to use PPP over phone lines or other
-	  asynchronous serial lines, you need to say Y (or M) here and also to
-	  the next option, "PPP support for async serial ports".  For PPP over
-	  synchronous lines, you should say Y (or M) here and to "Support
-	  synchronous PPP", below.
-
-	  If you said Y to "Version information on all symbols" above, then
-	  you cannot compile the PPP driver into the kernel; you can then only
-	  compile it as a module. To compile this driver as a module, choose M
-	  here. The module will be called ppp_generic.
-
-config PPP_MULTILINK
-	bool "PPP multilink support (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	help
-	  PPP multilink is a protocol (defined in RFC 1990) which allows you
-	  to combine several (logical or physical) lines into one logical PPP
-	  connection, so that you can utilize your full bandwidth.
-
-	  This has to be supported at the other end as well and you need a
-	  version of the pppd daemon which understands the multilink protocol.
-
-	  If unsure, say N.
-
-config PPP_FILTER
-	bool "PPP filtering"
-	depends on PPP
-	help
-	  Say Y here if you want to be able to filter the packets passing over
-	  PPP interfaces.  This allows you to control which packets count as
-	  activity (i.e. which packets will reset the idle timer or bring up
-	  a demand-dialed link) and which packets are to be dropped entirely.
-	  You need to say Y here if you wish to use the pass-filter and
-	  active-filter options to pppd.
-
-	  If unsure, say N.
-
-config PPP_ASYNC
-	tristate "PPP support for async serial ports"
-	depends on PPP
-	select CRC_CCITT
-	---help---
-	  Say Y (or M) here if you want to be able to use PPP over standard
-	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
-	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
-	  need this option.
-
-	  To compile this driver as a module, choose M here.
-
-	  If unsure, say Y.
-
-config PPP_SYNC_TTY
-	tristate "PPP support for sync tty ports"
-	depends on PPP
-	help
-	  Say Y (or M) here if you want to be able to use PPP over synchronous
-	  (HDLC) tty devices, such as the SyncLink adapter. These devices
-	  are often used for high-speed leased lines like T1/E1.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_DEFLATE
-	tristate "PPP Deflate compression"
-	depends on PPP
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	---help---
-	  Support for the Deflate compression method for PPP, which uses the
-	  Deflate algorithm (the same algorithm that gzip uses) to compress
-	  each PPP packet before it is sent over the wire.  The machine at the
-	  other end of the PPP link (usually your ISP) has to support the
-	  Deflate compression method as well for this to be useful.  Even if
-	  they don't support it, it is safe to say Y here.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_BSDCOMP
-	tristate "PPP BSD-Compress compression"
-	depends on PPP
-	---help---
-	  Support for the BSD-Compress compression method for PPP, which uses
-	  the LZW compression method to compress each PPP packet before it is
-	  sent over the wire. The machine at the other end of the PPP link
-	  (usually your ISP) has to support the BSD-Compress compression
-	  method as well for this to be useful. Even if they don't support it,
-	  it is safe to say Y here.
-
-	  The PPP Deflate compression method ("PPP Deflate compression",
-	  above) is preferable to BSD-Compress, because it compresses better
-	  and is patent-free.
-
-	  Note that the BSD compression code will always be compiled as a
-	  module; it is called bsd_comp and will show up in the directory
-	  modules once you have said "make modules". If unsure, say N.
-
-config PPP_MPPE
-	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	select CRYPTO
-	select CRYPTO_SHA1
-	select CRYPTO_ARC4
-	select CRYPTO_ECB
-	---help---
-	  Support for the MPPE Encryption protocol, as employed by the
-	  Microsoft Point-to-Point Tunneling Protocol.
-
-	  See http://pptpclient.sourceforge.net/ for information on
-	  configuring PPTP clients and servers to utilize this method.
-
-config PPPOE
-	tristate "PPP over Ethernet (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP
-	help
-	  Support for PPP over Ethernet.
-
-	  This driver requires the latest version of pppd from the CVS
-	  repository at cvs.samba.org.  Alternatively, see the 
-	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-	  which contains instruction on how to use this driver (under 
-	  the heading "Kernel mode PPPoE").
-
-config PPTP
-	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
-	help
-	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
-
-	  This driver requires pppd plugin to work in client mode or
-	  modified pptpd (poptop) to work in server mode.
-	  See http://accel-pptp.sourceforge.net/ for information how to
-	  utilize this module.
-
-config PPPOATM
-	tristate "PPP over ATM"
-	depends on ATM && PPP
-	help
-	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
-	  This implementation does not yet comply with section 8 of RFC2364,
-	  which can lead to bad results if the ATM peer loses state and
-	  changes its encapsulation unilaterally.
-
-config PPPOL2TP
-	tristate "PPP over L2TP (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && L2TP && PPP
-	help
-	  Support for PPP-over-L2TP socket family. L2TP is a protocol
-	  used by ISPs and enterprises to tunnel PPP traffic over UDP
-	  tunnels. L2TP is replacing PPTP for VPN uses.
-
 config SLIP
 	tristate "SLIP (serial line) support"
 	---help---
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3087b27..9ce7c70 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -22,15 +22,6 @@ obj-$(CONFIG_RIONET) += rionet.o
 
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_PPP) += ppp_generic.o
-obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
-obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
-obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
-obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
-obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-obj-$(CONFIG_PPPOL2TP) += pppox.o
-obj-$(CONFIG_PPTP) += pppox.o pptp.o
 obj-$(CONFIG_SLIP) += slip.o
 obj-$(CONFIG_SLHC) += slhc.o
 
@@ -48,6 +39,7 @@ obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
+onj-$(CONFIG_PPP) += ppp/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/
diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
new file mode 100644
index 0000000..872df3e
--- /dev/null
+++ b/drivers/net/ppp/Kconfig
@@ -0,0 +1,175 @@
+#
+# PPP network device configuration
+#
+
+config PPP
+	tristate "PPP (point-to-point protocol) support"
+	select SLHC
+	---help---
+	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+	  the same purpose: sending Internet traffic over telephone (and other
+	  serial) lines.  Ask your access provider if they support it, because
+	  otherwise you can't use it; most Internet access providers these
+	  days support PPP rather than SLIP.
+
+	  To use PPP, you need an additional program called pppd as described
+	  in the PPP-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
+	  the version of pppd recommended in <file:Documentation/Changes>.
+	  The PPP option enlarges your kernel by about 16 KB.
+
+	  There are actually two versions of PPP: the traditional PPP for
+	  asynchronous lines, such as regular analog phone lines, and
+	  synchronous PPP which can be used over digital ISDN lines for
+	  example.  If you want to use PPP over phone lines or other
+	  asynchronous serial lines, you need to say Y (or M) here and also to
+	  the next option, "PPP support for async serial ports".  For PPP over
+	  synchronous lines, you should say Y (or M) here and to "Support
+	  synchronous PPP", below.
+
+	  If you said Y to "Version information on all symbols" above, then
+	  you cannot compile the PPP driver into the kernel; you can then only
+	  compile it as a module. To compile this driver as a module, choose M
+	  here. The module will be called ppp_generic.
+
+if PPP
+
+config PPP_BSDCOMP
+	tristate "PPP BSD-Compress compression"
+	depends on PPP
+	---help---
+	  Support for the BSD-Compress compression method for PPP, which uses
+	  the LZW compression method to compress each PPP packet before it is
+	  sent over the wire. The machine at the other end of the PPP link
+	  (usually your ISP) has to support the BSD-Compress compression
+	  method as well for this to be useful. Even if they don't support it,
+	  it is safe to say Y here.
+
+	  The PPP Deflate compression method ("PPP Deflate compression",
+	  above) is preferable to BSD-Compress, because it compresses better
+	  and is patent-free.
+
+	  Note that the BSD compression code will always be compiled as a
+	  module; it is called bsd_comp and will show up in the directory
+	  modules once you have said "make modules". If unsure, say N.
+
+config PPP_DEFLATE
+	tristate "PPP Deflate compression"
+	depends on PPP
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	---help---
+	  Support for the Deflate compression method for PPP, which uses the
+	  Deflate algorithm (the same algorithm that gzip uses) to compress
+	  each PPP packet before it is sent over the wire.  The machine at the
+	  other end of the PPP link (usually your ISP) has to support the
+	  Deflate compression method as well for this to be useful.  Even if
+	  they don't support it, it is safe to say Y here.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_FILTER
+	bool "PPP filtering"
+	depends on PPP
+	---help---
+	  Say Y here if you want to be able to filter the packets passing over
+	  PPP interfaces.  This allows you to control which packets count as
+	  activity (i.e. which packets will reset the idle timer or bring up
+	  a demand-dialed link) and which packets are to be dropped entirely.
+	  You need to say Y here if you wish to use the pass-filter and
+	  active-filter options to pppd.
+
+	  If unsure, say N.
+
+config PPP_MPPE
+	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	select CRYPTO
+	select CRYPTO_SHA1
+	select CRYPTO_ARC4
+	select CRYPTO_ECB
+	---help---
+	  Support for the MPPE Encryption protocol, as employed by the
+	  Microsoft Point-to-Point Tunneling Protocol.
+
+	  See http://pptpclient.sourceforge.net/ for information on
+	  configuring PPTP clients and servers to utilize this method.
+
+config PPP_MULTILINK
+	bool "PPP multilink support (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	---help---
+	  PPP multilink is a protocol (defined in RFC 1990) which allows you
+	  to combine several (logical or physical) lines into one logical PPP
+	  connection, so that you can utilize your full bandwidth.
+
+	  This has to be supported at the other end as well and you need a
+	  version of the pppd daemon which understands the multilink protocol.
+
+	  If unsure, say N.
+
+config PPPOATM
+	tristate "PPP over ATM"
+	depends on ATM && PPP
+	---help---
+	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+	  This implementation does not yet comply with section 8 of RFC2364,
+	  which can lead to bad results if the ATM peer loses state and
+	  changes its encapsulation unilaterally.
+
+config PPPOE
+	tristate "PPP over Ethernet (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP
+	---help---
+	  Support for PPP over Ethernet.
+
+	  This driver requires the latest version of pppd from the CVS
+	  repository at cvs.samba.org.  Alternatively, see the
+	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+	  which contains instruction on how to use this driver (under
+	  the heading "Kernel mode PPPoE").
+
+config PPTP
+	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
+	---help---
+	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
+
+	  This driver requires pppd plugin to work in client mode or
+	  modified pptpd (poptop) to work in server mode.
+	  See http://accel-pptp.sourceforge.net/ for information how to
+	  utilize this module.
+
+config PPPOL2TP
+	tristate "PPP over L2TP (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && L2TP && PPP
+	---help---
+	  Support for PPP-over-L2TP socket family. L2TP is a protocol
+	  used by ISPs and enterprises to tunnel PPP traffic over UDP
+	  tunnels. L2TP is replacing PPTP for VPN uses.
+
+config PPP_ASYNC
+	tristate "PPP support for async serial ports"
+	depends on PPP
+	select CRC_CCITT
+	---help---
+	  Say Y (or M) here if you want to be able to use PPP over standard
+	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+	  need this option.
+
+	  To compile this driver as a module, choose M here.
+
+	  If unsure, say Y.
+
+config PPP_SYNC_TTY
+	tristate "PPP support for sync tty ports"
+	depends on PPP
+	---help---
+	  Say Y (or M) here if you want to be able to use PPP over synchronous
+	  (HDLC) tty devices, such as the SyncLink adapter. These devices
+	  are often used for high-speed leased lines like T1/E1.
+
+	  To compile this driver as a module, choose M here.
+
+endif # PPP
diff --git a/drivers/net/ppp/Makefile b/drivers/net/ppp/Makefile
new file mode 100644
index 0000000..a6b6297
--- /dev/null
+++ b/drivers/net/ppp/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the Linux PPP network device drivers.
+#
+
+obj-$(CONFIG_PPP) += ppp_generic.o
+obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
+obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
+obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
+obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
+obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
+obj-$(CONFIG_PPPOL2TP) += pppox.o
+obj-$(CONFIG_PPTP) += pppox.o pptp.o
diff --git a/drivers/net/bsd_comp.c b/drivers/net/ppp/bsd_comp.c
similarity index 100%
rename from drivers/net/bsd_comp.c
rename to drivers/net/ppp/bsd_comp.c
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp/ppp_async.c
similarity index 100%
rename from drivers/net/ppp_async.c
rename to drivers/net/ppp/ppp_async.c
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp/ppp_deflate.c
similarity index 100%
rename from drivers/net/ppp_deflate.c
rename to drivers/net/ppp/ppp_deflate.c
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
similarity index 100%
rename from drivers/net/ppp_generic.c
rename to drivers/net/ppp/ppp_generic.c
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
similarity index 100%
rename from drivers/net/ppp_mppe.c
rename to drivers/net/ppp/ppp_mppe.c
diff --git a/drivers/net/ppp_mppe.h b/drivers/net/ppp/ppp_mppe.h
similarity index 100%
rename from drivers/net/ppp_mppe.h
rename to drivers/net/ppp/ppp_mppe.h
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c
similarity index 100%
rename from drivers/net/ppp_synctty.c
rename to drivers/net/ppp/ppp_synctty.c
diff --git a/drivers/net/pppoe.c b/drivers/net/ppp/pppoe.c
similarity index 100%
rename from drivers/net/pppoe.c
rename to drivers/net/ppp/pppoe.c
diff --git a/drivers/net/pppox.c b/drivers/net/ppp/pppox.c
similarity index 100%
rename from drivers/net/pppox.c
rename to drivers/net/ppp/pppox.c
diff --git a/drivers/net/pptp.c b/drivers/net/ppp/pptp.c
similarity index 100%
rename from drivers/net/pptp.c
rename to drivers/net/ppp/pptp.c
-- 
1.7.6

^ permalink raw reply related

* [net-next 05/10] plip: Move the PLIP driver
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Niibe Yutaka
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the Parallel Line Internet Protocol (PLIP) driver into
drivers/net/plip/ and make the necessary Kconfig and Makefile changes.

CC: Niibe Yutaka <gniibe@mri.co.jp>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
---
 drivers/net/Kconfig           |   37 ++-----------------------------------
 drivers/net/Makefile          |    2 +-
 drivers/net/plip/Kconfig      |   38 ++++++++++++++++++++++++++++++++++++++
 drivers/net/plip/Makefile     |    5 +++++
 drivers/net/{ => plip}/plip.c |    0
 5 files changed, 46 insertions(+), 36 deletions(-)
 create mode 100644 drivers/net/plip/Kconfig
 create mode 100644 drivers/net/plip/Makefile
 rename drivers/net/{ => plip}/plip.c (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1d8fa95..3f72686 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -197,6 +197,8 @@ source "drivers/net/ethernet/Kconfig"
 
 source "drivers/net/fddi/Kconfig"
 
+source "drivers/net/plip/Kconfig"
+
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
@@ -272,41 +274,6 @@ config RIONET_RX_SIZE
 	depends on RIONET
 	default "128"
 
-config PLIP
-	tristate "PLIP (parallel port) support"
-	depends on PARPORT
-	---help---
-	  PLIP (Parallel Line Internet Protocol) is used to create a
-	  reasonably fast mini network consisting of two (or, rarely, more)
-	  local machines.  A PLIP link from a Linux box is a popular means to
-	  install a Linux distribution on a machine which doesn't have a
-	  CD-ROM drive (a minimal system has to be transferred with floppies
-	  first). The kernels on both machines need to have this PLIP option
-	  enabled for this to work.
-
-	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
-	  ports (the connectors at the computers with 25 holes) are connected
-	  with "null printer" or "Turbo Laplink" cables which can transmit 4
-	  bits at a time (mode 0) or with special PLIP cables, to be used on
-	  bidirectional parallel ports only, which can transmit 8 bits at a
-	  time (mode 1); you can find the wiring of these cables in
-	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
-	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
-	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
-	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
-	  and winsock or NCSA's telnet.
-
-	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
-	  as the NET-3-HOWTO, both available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
-	  protocol has been changed and this PLIP driver won't work together
-	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
-	  your kernel by about 8 KB.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called plip. If unsure, say Y or M, in case you buy
-	  a laptop later.
-
 config SLIP
 	tristate "SLIP (serial line) support"
 	---help---
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index aff07bd..7013815 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
 #
 # link order important here
 #
-obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_RIONET) += rionet.o
 
 #
@@ -39,6 +38,7 @@ obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_PLIP) += plip/
 onj-$(CONFIG_PPP) += ppp/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig
new file mode 100644
index 0000000..80c4a33
--- /dev/null
+++ b/drivers/net/plip/Kconfig
@@ -0,0 +1,38 @@
+#
+# Parallel Line Internet Protocol (PLIP) network device configuration
+#
+
+config PLIP
+	tristate "PLIP (parallel port) support"
+	depends on PARPORT
+	---help---
+	  PLIP (Parallel Line Internet Protocol) is used to create a
+	  reasonably fast mini network consisting of two (or, rarely, more)
+	  local machines.  A PLIP link from a Linux box is a popular means to
+	  install a Linux distribution on a machine which doesn't have a
+	  CD-ROM drive (a minimal system has to be transferred with floppies
+	  first). The kernels on both machines need to have this PLIP option
+	  enabled for this to work.
+
+	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+	  ports (the connectors at the computers with 25 holes) are connected
+	  with "null printer" or "Turbo Laplink" cables which can transmit 4
+	  bits at a time (mode 0) or with special PLIP cables, to be used on
+	  bidirectional parallel ports only, which can transmit 8 bits at a
+	  time (mode 1); you can find the wiring of these cables in
+	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
+	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+	  and winsock or NCSA's telnet.
+
+	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+	  as the NET-3-HOWTO, both available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
+	  protocol has been changed and this PLIP driver won't work together
+	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
+	  your kernel by about 8 KB.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called plip. If unsure, say Y or M, in case you buy
+	  a laptop later.
diff --git a/drivers/net/plip/Makefile b/drivers/net/plip/Makefile
new file mode 100644
index 0000000..ed95879
--- /dev/null
+++ b/drivers/net/plip/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the PLIP network device drivers.
+#
+
+obj-$(CONFIG_PLIP) += plip.o
diff --git a/drivers/net/plip.c b/drivers/net/plip/plip.c
similarity index 100%
rename from drivers/net/plip.c
rename to drivers/net/plip/plip.c
-- 
1.7.6

^ permalink raw reply related

* [net-next 04/10] hippi: Move the HIPPI driver
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Jes Sorensen, Jes Sorensen
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the HIPPI driver into drivers/net/hippi/ and make the
necessary Kconfig and Makefile changes.

CC: Jes Sorensen <jes@wildopensource.com>
CC: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                       |    1 +
 drivers/net/Kconfig               |   32 ------------------------------
 drivers/net/Makefile              |    2 +-
 drivers/net/hippi/Kconfig         |   39 +++++++++++++++++++++++++++++++++++++
 drivers/net/hippi/Makefile        |    5 ++++
 drivers/net/{ => hippi}/rrunner.c |    0
 drivers/net/{ => hippi}/rrunner.h |    0
 7 files changed, 46 insertions(+), 33 deletions(-)
 create mode 100644 drivers/net/hippi/Kconfig
 create mode 100644 drivers/net/hippi/Makefile
 rename drivers/net/{ => hippi}/rrunner.c (100%)
 rename drivers/net/{ => hippi}/rrunner.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index c5ec925..194095a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3049,6 +3049,7 @@ S:	Maintained
 F:	include/linux/hippidevice.h
 F:	include/linux/if_hippi.h
 F:	net/802/hippi.c
+F:	drivers/net/hippi/
 
 HOST AP DRIVER
 M:	Jouni Malinen <j@w1.fi>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c5e2a38..1d8fa95 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -272,38 +272,6 @@ config RIONET_RX_SIZE
 	depends on RIONET
 	default "128"
 
-config HIPPI
-	bool "HIPPI driver support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && INET && PCI
-	help
-	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
-	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
-	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
-	  single-mode). HIPPI networks are commonly used for clusters and to
-	  connect to super computers. If you are connected to a HIPPI network
-	  and have a HIPPI network card in your computer that you want to use
-	  under Linux, say Y here (you must also remember to enable the driver
-	  for your HIPPI card below). Most people will say N here.
-
-config ROADRUNNER
-	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
-	depends on HIPPI && PCI
-	help
-	  Say Y here if this is your PCI HIPPI network card.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called rrunner.  If unsure, say N.
-
-config ROADRUNNER_LARGE_RINGS
-	bool "Use large TX/RX rings (EXPERIMENTAL)"
-	depends on ROADRUNNER
-	help
-	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
-	  of additional memory to allow for fastest operation, both for
-	  transmitting and receiving. This memory cannot be used by any other
-	  kernel code or by user space programs. Say Y here only if you have
-	  the memory.
-
 config PLIP
 	tristate "PLIP (parallel port) support"
 	depends on PARPORT
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 9ce7c70..aff07bd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
 # link order important here
 #
 obj-$(CONFIG_PLIP) += plip.o
-obj-$(CONFIG_ROADRUNNER) += rrunner.o
 obj-$(CONFIG_RIONET) += rionet.o
 
 #
@@ -39,6 +38,7 @@ obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
+obj-$(CONFIG_HIPPI) += hippi/
 onj-$(CONFIG_PPP) += ppp/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
new file mode 100644
index 0000000..7393eb7
--- /dev/null
+++ b/drivers/net/hippi/Kconfig
@@ -0,0 +1,39 @@
+#
+# HIPPI network device configuration
+#
+
+config HIPPI
+	bool "HIPPI driver support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET && PCI
+	---help---
+	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
+	  single-mode). HIPPI networks are commonly used for clusters and to
+	  connect to super computers. If you are connected to a HIPPI network
+	  and have a HIPPI network card in your computer that you want to use
+	  under Linux, say Y here (you must also remember to enable the driver
+	  for your HIPPI card below). Most people will say N here.
+
+if HIPPI
+
+config ROADRUNNER
+	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+	depends on PCI
+	---help---
+	  Say Y here if this is your PCI HIPPI network card.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rrunner.  If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+	bool "Use large TX/RX rings (EXPERIMENTAL)"
+	depends on ROADRUNNER
+	---help---
+	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+	  of additional memory to allow for fastest operation, both for
+	  transmitting and receiving. This memory cannot be used by any other
+	  kernel code or by user space programs. Say Y here only if you have
+	  the memory.
+
+endif /* HIPPI */
diff --git a/drivers/net/hippi/Makefile b/drivers/net/hippi/Makefile
new file mode 100644
index 0000000..b95d629
--- /dev/null
+++ b/drivers/net/hippi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the HIPPI network device drivers.
+#
+
+obj-$(CONFIG_ROADRUNNER) += rrunner.o
diff --git a/drivers/net/rrunner.c b/drivers/net/hippi/rrunner.c
similarity index 100%
rename from drivers/net/rrunner.c
rename to drivers/net/hippi/rrunner.c
diff --git a/drivers/net/rrunner.h b/drivers/net/hippi/rrunner.h
similarity index 100%
rename from drivers/net/rrunner.h
rename to drivers/net/hippi/rrunner.h
-- 
1.7.6

^ permalink raw reply related

* [net-next 06/10] slip: Move the SLIP drivers
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the Serial Line Internet Protocol (SLIP) drivers into
drivers/net/slip/ and make the necessary Kconfig and Makefile
changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
---
 drivers/net/Kconfig           |   74 +-------------------------------------
 drivers/net/Makefile          |    3 +-
 drivers/net/slip/Kconfig      |   79 +++++++++++++++++++++++++++++++++++++++++
 drivers/net/slip/Makefile     |    6 +++
 drivers/net/{ => slip}/slhc.c |    0
 drivers/net/{ => slip}/slip.c |    0
 drivers/net/{ => slip}/slip.h |    0
 7 files changed, 88 insertions(+), 74 deletions(-)
 create mode 100644 drivers/net/slip/Kconfig
 create mode 100644 drivers/net/slip/Makefile
 rename drivers/net/{ => slip}/slhc.c (100%)
 rename drivers/net/{ => slip}/slip.c (100%)
 rename drivers/net/{ => slip}/slip.h (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3f72686..b3206c9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -199,6 +199,8 @@ source "drivers/net/fddi/Kconfig"
 
 source "drivers/net/plip/Kconfig"
 
+source "drivers/net/slip/Kconfig"
+
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
@@ -274,78 +276,6 @@ config RIONET_RX_SIZE
 	depends on RIONET
 	default "128"
 
-config SLIP
-	tristate "SLIP (serial line) support"
-	---help---
-	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
-	  connect to your Internet service provider or to connect to some
-	  other local Unix box or if you want to configure your Linux box as a
-	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
-	  Internet Protocol) is a protocol used to send Internet traffic over
-	  serial connections such as telephone lines or null modem cables;
-	  nowadays, the protocol PPP is more commonly used for this same
-	  purpose.
-
-	  Normally, your access provider has to support SLIP in order for you
-	  to be able to use it, but there is now a SLIP emulator called SLiRP
-	  around (available from
-	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-	  allows you to use SLIP over a regular dial up shell connection. If
-	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
-	  NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, explains how to
-	  configure SLIP. Note that you don't need this option if you just
-	  want to run term (term is a program which gives you almost full
-	  Internet connectivity if you have a regular dial up shell account on
-	  some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
-	  support will enlarge your kernel by about 4 KB. If unsure, say N.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called slip.
-
-config SLIP_COMPRESSED
-	bool "CSLIP compressed headers"
-	depends on SLIP
-	select SLHC
-	---help---
-	  This protocol is faster than SLIP because it uses compression on the
-	  TCP/IP headers (not on the data itself), but it has to be supported
-	  on both ends. Ask your access provider if you are not sure and
-	  answer Y, just in case. You will still be able to use plain SLIP. If
-	  you plan to use SLiRP, the SLIP emulator (available from
-	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-	  allows you to use SLIP over a regular dial up shell connection, you
-	  definitely want to say Y here. The NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, explains how to configure
-	  CSLIP. This won't enlarge your kernel.
-
-config SLHC
-	tristate
-	help
-	  This option enables Van Jacobsen serial line header compression
-	  routines.
-
-config SLIP_SMART
-	bool "Keepalive and linefill"
-	depends on SLIP
-	help
-	  Adds additional capabilities to the SLIP driver to support the
-	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
-	  analogue lines.
-
-config SLIP_MODE_SLIP6
-	bool "Six bit SLIP encapsulation"
-	depends on SLIP
-	help
-	  Just occasionally you may need to run IP over hostile serial
-	  networks that don't pass all control characters or are only seven
-	  bit. Saying Y here adds an extra mode you can use with SLIP:
-	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
-	  the serial device. Naturally, this has to be supported at the other
-	  end of the link as well. It's good enough, for example, to run IP
-	  over the async ports of a Camtec JNT Pad. If unsure, say N.
-
 config NET_FC
 	bool "Fibre Channel driver support"
 	depends on SCSI && PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7013815..23ea83c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -20,8 +20,6 @@ obj-$(CONFIG_RIONET) += rionet.o
 
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_SLIP) += slip.o
-obj-$(CONFIG_SLHC) += slhc.o
 
 obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
 obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
@@ -40,6 +38,7 @@ obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_HIPPI) += hippi/
 obj-$(CONFIG_PLIP) += plip/
 onj-$(CONFIG_PPP) += ppp/
+onj-$(CONFIG_SLIP) += slip/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/
diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig
new file mode 100644
index 0000000..211b160
--- /dev/null
+++ b/drivers/net/slip/Kconfig
@@ -0,0 +1,79 @@
+#
+# SLIP network device configuration
+#
+
+config SLIP
+	tristate "SLIP (serial line) support"
+	---help---
+	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+	  connect to your Internet service provider or to connect to some
+	  other local Unix box or if you want to configure your Linux box as a
+	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+	  Internet Protocol) is a protocol used to send Internet traffic over
+	  serial connections such as telephone lines or null modem cables;
+	  nowadays, the protocol PPP is more commonly used for this same
+	  purpose.
+
+	  Normally, your access provider has to support SLIP in order for you
+	  to be able to use it, but there is now a SLIP emulator called SLiRP
+	  around (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection. If
+	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to
+	  configure SLIP. Note that you don't need this option if you just
+	  want to run term (term is a program which gives you almost full
+	  Internet connectivity if you have a regular dial up shell account on
+	  some Internet connected Unix computer. Read
+	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+	  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called slip.
+
+config SLHC
+	tristate
+	---help---
+	  This option enables Van Jacobsen serial line header compression
+	  routines.
+
+if SLIP
+
+config SLIP_COMPRESSED
+	bool "CSLIP compressed headers"
+	depends on SLIP
+	select SLHC
+	---help---
+	  This protocol is faster than SLIP because it uses compression on the
+	  TCP/IP headers (not on the data itself), but it has to be supported
+	  on both ends. Ask your access provider if you are not sure and
+	  answer Y, just in case. You will still be able to use plain SLIP. If
+	  you plan to use SLiRP, the SLIP emulator (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection, you
+	  definitely want to say Y here. The NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to configure
+	  CSLIP. This won't enlarge your kernel.
+
+config SLIP_SMART
+	bool "Keepalive and linefill"
+	depends on SLIP
+	---help---
+	  Adds additional capabilities to the SLIP driver to support the
+	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+	  analogue lines.
+
+config SLIP_MODE_SLIP6
+	bool "Six bit SLIP encapsulation"
+	depends on SLIP
+	---help---
+	  Just occasionally you may need to run IP over hostile serial
+	  networks that don't pass all control characters or are only seven
+	  bit. Saying Y here adds an extra mode you can use with SLIP:
+	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+	  the serial device. Naturally, this has to be supported at the other
+	  end of the link as well. It's good enough, for example, to run IP
+	  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+endif # SLIP
diff --git a/drivers/net/slip/Makefile b/drivers/net/slip/Makefile
new file mode 100644
index 0000000..e3ebc59
--- /dev/null
+++ b/drivers/net/slip/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SLIP network device drivers.
+#
+
+obj-$(CONFIG_SLIP) += slip.o
+obj-$(CONFIG_SLHC) += slhc.o
diff --git a/drivers/net/slhc.c b/drivers/net/slip/slhc.c
similarity index 100%
rename from drivers/net/slhc.c
rename to drivers/net/slip/slhc.c
diff --git a/drivers/net/slip.c b/drivers/net/slip/slip.c
similarity index 100%
rename from drivers/net/slip.c
rename to drivers/net/slip/slip.c
diff --git a/drivers/net/slip.h b/drivers/net/slip/slip.h
similarity index 100%
rename from drivers/net/slip.h
rename to drivers/net/slip/slip.h
-- 
1.7.6

^ permalink raw reply related

* [net-next 07/10] ixbmtr_cs: Move the IBM PCMCIA Token Ring driver
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Mike Phillips, Burt Silverman
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the IBM PCMCIA Token Ring driver into drivers/net/tokenring/ with
the other Token Ring drivers.  Made the necessary Kconfig and Makefile
changes as well.

CC: Mike Phillips <phillim@amtrak.com>
CC: Burt Silverman <burts@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/pcmcia/Kconfig                   |   11 -----------
 drivers/net/pcmcia/Makefile                  |    2 --
 drivers/net/tokenring/Kconfig                |   13 ++++++++++++-
 drivers/net/tokenring/Makefile               |   21 +++++++++++----------
 drivers/net/{pcmcia => tokenring}/ibmtr_cs.c |    2 +-
 5 files changed, 24 insertions(+), 25 deletions(-)
 rename drivers/net/{pcmcia => tokenring}/ibmtr_cs.c (99%)

diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 12e7ae4..ff4deb0 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -31,15 +31,4 @@ config ARCNET_COM20020_CS
 	  To compile this driver as a module, choose M here: the module will be
 	  called com20020_cs.  If unsure, say N.
 
-config PCMCIA_IBMTR
-	tristate "IBM PCMCIA tokenring adapter support"
-	depends on IBMTR!=y && TR
-	help
-	  Say Y here if you intend to attach this type of Token Ring PCMCIA
-	  card to your computer. You then also need to say Y to "Token Ring
-	  driver support".
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ibmtr_cs.
-
 endif # NET_PCMCIA
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index 618e816..b98a0a4 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -4,5 +4,3 @@
 
 # 16-bit client drivers
 obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
-
-obj-$(CONFIG_PCMCIA_IBMTR)	+= ibmtr_cs.o
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index c4137b0..0f70158 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -6,7 +6,7 @@
 menuconfig TR
 	tristate "Token Ring driver support"
 	depends on NETDEVICES && !UML
-	depends on (PCI || ISA || MCA || CCW)
+	depends on (PCI || ISA || MCA || CCW || PCMCIA)
 	select LLC
 	help
 	  Token Ring is IBM's way of communication on a local network; the
@@ -20,6 +20,17 @@ menuconfig TR
 
 if TR
 
+config PCMCIA_IBMTR
+	tristate "IBM PCMCIA tokenring adapter support"
+	depends on IBMTR!=y && PCMCIA
+	---help---
+	  Say Y here if you intend to attach this type of Token Ring PCMCIA
+	  card to your computer. You then also need to say Y to "Token Ring
+	  driver support".
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ibmtr_cs.
+
 config IBMTR
 	tristate "IBM Tropic chipset based adapter support"
 	depends on ISA || MCA
diff --git a/drivers/net/tokenring/Makefile b/drivers/net/tokenring/Makefile
index c88b0a5..f1be8d9 100644
--- a/drivers/net/tokenring/Makefile
+++ b/drivers/net/tokenring/Makefile
@@ -2,14 +2,15 @@
 # Makefile for drivers/net/tokenring
 #
 
-obj-$(CONFIG_IBMTR) 	+= ibmtr.o
-obj-$(CONFIG_IBMOL) 	+= olympic.o
-obj-$(CONFIG_IBMLS) 	+= lanstreamer.o
-obj-$(CONFIG_TMS380TR) 	+= tms380tr.o
-obj-$(CONFIG_ABYSS) 	+= abyss.o
-obj-$(CONFIG_MADGEMC) 	+= madgemc.o
-obj-$(CONFIG_PROTEON) 	+= proteon.o
-obj-$(CONFIG_TMSPCI) 	+= tmspci.o
-obj-$(CONFIG_SKISA) 	+= skisa.o
-obj-$(CONFIG_SMCTR) 	+= smctr.o
+obj-$(CONFIG_PCMCIA_IBMTR)	+= ibmtr_cs.o
+obj-$(CONFIG_IBMTR)	+= ibmtr.o
+obj-$(CONFIG_IBMOL)	+= olympic.o
+obj-$(CONFIG_IBMLS)	+= lanstreamer.o
+obj-$(CONFIG_TMS380TR)	+= tms380tr.o
+obj-$(CONFIG_ABYSS)	+= abyss.o
+obj-$(CONFIG_MADGEMC)	+= madgemc.o
+obj-$(CONFIG_PROTEON)	+= proteon.o
+obj-$(CONFIG_TMSPCI)	+= tmspci.o
+obj-$(CONFIG_SKISA)	+= skisa.o
+obj-$(CONFIG_SMCTR)	+= smctr.o
 obj-$(CONFIG_3C359)	+= 3c359.o
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c
similarity index 99%
rename from drivers/net/pcmcia/ibmtr_cs.c
rename to drivers/net/tokenring/ibmtr_cs.c
index 6006d54..91b6846 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/tokenring/ibmtr_cs.c
@@ -66,7 +66,7 @@
 #include <asm/system.h>
 
 #define PCMCIA
-#include "../tokenring/ibmtr.c"
+#include "ibmtr.c"
 
 
 /*====================================================================*/
-- 
1.7.6

^ permalink raw reply related

* [net-next 08/10] com20020_cs: Move the PCMCIA Arcnet driver
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Arnaldo Carvalho de Melo
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Move the COM20020 PCMICA Arcnet driver into drivers/net/arcnet/ with
the other Arcnet drivers.  Made the necessary Kconfig and Makefile
changes as well.

Since this was the "last" PCMCIA driver in drivers/net/pcmcia/, this patch
also cleans up the references to drivers/net/pcmcia.

CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/Kconfig                          |    2 -
 drivers/net/Makefile                         |    1 -
 drivers/net/arcnet/Kconfig                   |   12 ++++++++-
 drivers/net/arcnet/Makefile                  |    1 +
 drivers/net/{pcmcia => arcnet}/com20020_cs.c |    0
 drivers/net/pcmcia/Kconfig                   |   34 --------------------------
 drivers/net/pcmcia/Makefile                  |    6 ----
 7 files changed, 12 insertions(+), 44 deletions(-)
 rename drivers/net/{pcmcia => arcnet}/com20020_cs.c (100%)
 delete mode 100644 drivers/net/pcmcia/Kconfig
 delete mode 100644 drivers/net/pcmcia/Makefile

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b3206c9..5762370 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -209,8 +209,6 @@ source "drivers/net/wimax/Kconfig"
 
 source "drivers/net/usb/Kconfig"
 
-source "drivers/net/pcmcia/Kconfig"
-
 source "drivers/net/ppp/Kconfig"
 
 source "drivers/net/wan/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 23ea83c..d04d0ce 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -42,7 +42,6 @@ onj-$(CONFIG_SLIP) += slip/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/
-obj-$(CONFIG_NET_PCMCIA) += pcmcia/
 
 obj-$(CONFIG_USB_CATC)          += usb/
 obj-$(CONFIG_USB_KAWETH)        += usb/
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 3b2f7f1..84fb634 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig ARCNET
-	depends on NETDEVICES && (ISA || PCI)
+	depends on NETDEVICES && (ISA || PCI || PCMCIA)
 	tristate "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
@@ -123,4 +123,14 @@ config ARCNET_COM20020_PCI
 	tristate "Support for COM20020 on PCI"
 	depends on ARCNET_COM20020 && PCI
 
+config ARCNET_COM20020_CS
+	tristate "COM20020 ARCnet PCMCIA support"
+	depends on ARCNET_COM20020 && PCMCIA
+	help
+	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
+	  to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called com20020_cs.  If unsure, say N.
+
 endif # ARCNET
diff --git a/drivers/net/arcnet/Makefile b/drivers/net/arcnet/Makefile
index 5861af5..5ce8ee6 100644
--- a/drivers/net/arcnet/Makefile
+++ b/drivers/net/arcnet/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_ARCNET_RIM_I) += arc-rimi.o
 obj-$(CONFIG_ARCNET_COM20020) += com20020.o
 obj-$(CONFIG_ARCNET_COM20020_ISA) += com20020-isa.o
 obj-$(CONFIG_ARCNET_COM20020_PCI) += com20020-pci.o
+obj-$(CONFIG_ARCNET_COM20020_CS) += com20020_cs.o
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c
similarity index 100%
rename from drivers/net/pcmcia/com20020_cs.c
rename to drivers/net/arcnet/com20020_cs.c
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
deleted file mode 100644
index ff4deb0..0000000
--- a/drivers/net/pcmcia/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# PCMCIA Network device configuration
-#
-
-menuconfig NET_PCMCIA
-	bool "PCMCIA network device support"
-	depends on PCMCIA
-	---help---
-	  Say Y if you would like to include support for any PCMCIA or CardBus
-	  network adapters, then say Y to the driver for your particular card
-	  below.  PCMCIA- or PC-cards are credit-card size devices often used
-	  with laptops computers; CardBus is the newer and faster version of
-	  PCMCIA.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  You also want to check out the PCMCIA-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  If unsure, say N.
-
-if NET_PCMCIA && PCMCIA
-
-config ARCNET_COM20020_CS
-	tristate "COM20020 ARCnet PCMCIA support"
-	depends on ARCNET_COM20020
-	help
-	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
-	  to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called com20020_cs.  If unsure, say N.
-
-endif # NET_PCMCIA
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
deleted file mode 100644
index b98a0a4..0000000
--- a/drivers/net/pcmcia/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the Linux PCMCIA network device drivers.
-#
-
-# 16-bit client drivers
-obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
-- 
1.7.6

^ permalink raw reply related

* [net-next 09/10] drivers/net: Kconfig & Makefile cleanup
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

The is does a general cleanup of the drivers/net/ Kconfig and
Makefile.  This patch create a "core" option and places all
the networking core drivers into this option (default is yes
for this option).  In addition, it alphabitizes the Kconfig
driver options.

As a side cleanup, found that the arcnet, token ring, and PHY
Kconfig options were a tri-state option and should have been
a bool option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/Kconfig           |  267 +++++++++++++++++++++--------------------
 drivers/net/Makefile          |   63 ++++------
 drivers/net/arcnet/Kconfig    |    2 +-
 drivers/net/phy/Kconfig       |    2 +-
 drivers/net/tokenring/Kconfig |    2 +-
 5 files changed, 167 insertions(+), 169 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5762370..583f66c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -25,18 +25,32 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config IFB
-	tristate "Intermediate Functional Block support"
-	depends on NET_CLS_ACT
+config NET_CORE
+	default y
+	bool "Network core driver support"
 	---help---
-	  This is an intermediate driver that allows sharing of
-	  resources.
+	  You can say N here if you do not intend to use any of the
+	  networking core drivers (i.e. VLAN, bridging, bonding, etc.)
+
+if NET_CORE
+
+config BONDING
+	tristate "Bonding driver support"
+	depends on INET
+	depends on IPV6 || IPV6=n
+	---help---
+	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+	  Channels together. This is called 'Etherchannel' by Cisco,
+	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+	  The driver supports multiple bonding modes to allow for both high
+	  performance and high availability operation.
+
+	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  information.
+
 	  To compile this driver as a module, choose M here: the module
-	  will be called ifb.  If you want to use more than one ifb
-	  device at a time, you need to compile this driver as a module.
-	  Instead of 'ifb', the devices will then be called 'ifb0',
-	  'ifb1' etc.
-	  Look at the iproute2 documentation directory for usage etc
+	  will be called bonding.
 
 config DUMMY
 	tristate "Dummy net driver support"
@@ -57,23 +71,59 @@ config DUMMY
 	  Instead of 'dummy', the devices will then be called 'dummy0',
 	  'dummy1' etc.
 
-config BONDING
-	tristate "Bonding driver support"
-	depends on INET
-	depends on IPV6 || IPV6=n
+config EQUALIZER
+	tristate "EQL (serial line load balancing) support"
 	---help---
-	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
-	  Channels together. This is called 'Etherchannel' by Cisco,
-	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+	  If you have two serial connections to some other computer (this
+	  usually requires two modems and two telephone lines) and you use
+	  SLIP (the protocol for sending Internet traffic over telephone
+	  lines) or PPP (a better SLIP) on them, you can make them behave like
+	  one double speed connection using this driver.  Naturally, this has
+	  to be supported at the other end as well, either with a similar EQL
+	  Linux driver or with a Livingston Portmaster 2e.
 
-	  The driver supports multiple bonding modes to allow for both high
-	  performance and high availability operation.
+	  Say Y if you want this and read
+	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  section 6.2 of the NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
 
-	  Refer to <file:Documentation/networking/bonding.txt> for more
-	  information.
+	  To compile this driver as a module, choose M here: the module
+	  will be called eql.  If unsure, say N.
+
+config NET_FC
+	bool "Fibre Channel driver support"
+	depends on SCSI && PCI
+	help
+	  Fibre Channel is a high speed serial protocol mainly used to connect
+	  large storage devices to the computer; it is compatible with and
+	  intended to replace SCSI.
+
+	  If you intend to use Fibre Channel, you need to have a Fibre channel
+	  adaptor card in your computer; say Y here and to the driver for your
+	  adaptor below. You also should have said Y to "SCSI support" and
+	  "SCSI generic support".
 
+config MII
+	tristate "Generic Media Independent Interface device support"
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lacks MII.
+
+source "drivers/ieee802154/Kconfig"
+
+config IFB
+	tristate "Intermediate Functional Block support"
+	depends on NET_CLS_ACT
+	---help---
+	  This is an intermediate driver that allows sharing of
+	  resources.
 	  To compile this driver as a module, choose M here: the module
-	  will be called bonding.
+	  will be called ifb.  If you want to use more than one ifb
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'ifb', the devices will then be called 'ifb0',
+	  'ifb1' etc.
+	  Look at the iproute2 documentation directory for usage etc
 
 config MACVLAN
 	tristate "MAC-VLAN support (EXPERIMENTAL)"
@@ -102,24 +152,46 @@ config MACVTAP
 	  To compile this driver as a module, choose M here: the module
 	  will be called macvtap.
 
-config EQUALIZER
-	tristate "EQL (serial line load balancing) support"
+config NETCONSOLE
+	tristate "Network console logging support"
 	---help---
-	  If you have two serial connections to some other computer (this
-	  usually requires two modems and two telephone lines) and you use
-	  SLIP (the protocol for sending Internet traffic over telephone
-	  lines) or PPP (a better SLIP) on them, you can make them behave like
-	  one double speed connection using this driver.  Naturally, this has
-	  to be supported at the other end as well, either with a similar EQL
-	  Linux driver or with a Livingston Portmaster 2e.
+	If you want to log kernel messages over the network, enable this.
+	See <file:Documentation/networking/netconsole.txt> for details.
 
-	  Say Y if you want this and read
-	  <file:Documentation/networking/eql.txt>.  You may also want to read
-	  section 6.2 of the NET-3-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+config NETCONSOLE_DYNAMIC
+	bool "Dynamic reconfiguration of logging targets"
+	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+			!(NETCONSOLE=y && CONFIGFS_FS=m)
+	help
+	  This option enables the ability to dynamically reconfigure target
+	  parameters (interface, IP addresses, port numbers, MAC addresses)
+	  at runtime through a userspace interface exported using configfs.
+	  See <file:Documentation/networking/netconsole.txt> for details.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called eql.  If unsure, say N.
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NETPOLL_TRAP
+	bool "Netpoll traffic trapping"
+	default n
+	depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
 
 config TUN
 	tristate "Universal TUN/TAP device driver support"
@@ -151,6 +223,28 @@ config VETH
 	  When one end receives the packet it appears on its pair and vice
 	  versa.
 
+config VIRTIO_NET
+	tristate "Virtio network driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && VIRTIO
+	---help---
+	  This is the virtual network driver for virtio.  It can be used with
+	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
+
+endif # NET_CORE
+
+config SUNGEM_PHY
+	tristate
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/net/caif/Kconfig"
+
+source "drivers/net/ethernet/Kconfig"
+
+source "drivers/net/fddi/Kconfig"
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP
@@ -175,52 +269,26 @@ config NET_SB1000
 
 	  If you don't have this card, of course say N.
 
-source "drivers/net/arcnet/Kconfig"
-
-config MII
-	tristate "Generic Media Independent Interface device support"
-	help
-	  Most ethernet controllers have MII transceiver either as an external
-	  or internal device.  It is safe to say Y or M here even if your
-	  ethernet card lacks MII.
-
 source "drivers/net/phy/Kconfig"
 
-config SUNGEM_PHY
-	tristate
-
-#
-#	Ethernet
-#
-
-source "drivers/net/ethernet/Kconfig"
-
-source "drivers/net/fddi/Kconfig"
-
 source "drivers/net/plip/Kconfig"
 
+source "drivers/net/ppp/Kconfig"
+
 source "drivers/net/slip/Kconfig"
 
+source "drivers/s390/net/Kconfig"
+
 source "drivers/net/tokenring/Kconfig"
 
+source "drivers/net/usb/Kconfig"
+
 source "drivers/net/wireless/Kconfig"
 
 source "drivers/net/wimax/Kconfig"
 
-source "drivers/net/usb/Kconfig"
-
-source "drivers/net/ppp/Kconfig"
-
 source "drivers/net/wan/Kconfig"
 
-source "drivers/atm/Kconfig"
-
-source "drivers/ieee802154/Kconfig"
-
-source "drivers/s390/net/Kconfig"
-
-source "drivers/net/caif/Kconfig"
-
 config XEN_NETDEV_FRONTEND
 	tristate "Xen network device frontend driver"
 	depends on XEN
@@ -260,67 +328,6 @@ config XEN_NETDEV_BACKEND
 	  compile this driver as a module, chose M here: the module
 	  will be called xen-netback.
 
-config RIONET
-	tristate "RapidIO Ethernet over messaging driver support"
-	depends on RAPIDIO
-
-config RIONET_TX_SIZE
-	int "Number of outbound queue entries"
-	depends on RIONET
-	default "128"
-
-config RIONET_RX_SIZE
-	int "Number of inbound queue entries"
-	depends on RIONET
-	default "128"
-
-config NET_FC
-	bool "Fibre Channel driver support"
-	depends on SCSI && PCI
-	help
-	  Fibre Channel is a high speed serial protocol mainly used to connect
-	  large storage devices to the computer; it is compatible with and
-	  intended to replace SCSI.
-
-	  If you intend to use Fibre Channel, you need to have a Fibre channel
-	  adaptor card in your computer; say Y here and to the driver for your
-	  adaptor below. You also should have said Y to "SCSI support" and
-	  "SCSI generic support".
-
-config NETCONSOLE
-	tristate "Network console logging support"
-	---help---
-	If you want to log kernel messages over the network, enable this.
-	See <file:Documentation/networking/netconsole.txt> for details.
-
-config NETCONSOLE_DYNAMIC
-	bool "Dynamic reconfiguration of logging targets"
-	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
-			!(NETCONSOLE=y && CONFIGFS_FS=m)
-	help
-	  This option enables the ability to dynamically reconfigure target
-	  parameters (interface, IP addresses, port numbers, MAC addresses)
-	  at runtime through a userspace interface exported using configfs.
-	  See <file:Documentation/networking/netconsole.txt> for details.
-
-config NETPOLL
-	def_bool NETCONSOLE
-
-config NETPOLL_TRAP
-	bool "Netpoll traffic trapping"
-	default n
-	depends on NETPOLL
-
-config NET_POLL_CONTROLLER
-	def_bool NETPOLL
-
-config VIRTIO_NET
-	tristate "Virtio network driver (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIRTIO
-	---help---
-	  This is the virtual network driver for virtio.  It can be used with
-	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
-
 config VMXNET3
 	tristate "VMware VMXNET3 ethernet driver"
 	depends on PCI && INET
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d04d0ce..33ff347 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,46 +2,51 @@
 # Makefile for the Linux network device drivers.
 #
 
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-obj-$(CONFIG_CAN) += can/
-obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_VMXNET3) += vmxnet3/
-
 #
-# link order important here
+# Networking Core Drivers
 #
-obj-$(CONFIG_RIONET) += rionet.o
-
-#
-# end link order section
-#
-
-obj-$(CONFIG_NET) += Space.o loopback.o
-obj-$(CONFIG_NET_SB1000) += sb1000.o
-
-obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
-obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
-
+obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_DUMMY) += dummy.o
+obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_EQUALIZER) += eql.o
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_NET) += Space.o loopback.o
+obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_PHYLIB) += phy/
+obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
+obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 
+#
+# Networking Drivers
+#
+obj-$(CONFIG_ARCNET) += arcnet/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_CAIF) += caif/
+obj-$(CONFIG_CAN) += can/
+obj-$(CONFIG_ETRAX_ETHERNET) += cris/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_HAMRADIO) += hamradio/
+obj-$(CONFIG_IRDA) += irda/
 obj-$(CONFIG_PLIP) += plip/
 onj-$(CONFIG_PPP) += ppp/
+obj-$(CONFIG_NET_SB1000) += sb1000.o
 onj-$(CONFIG_SLIP) += slip/
+obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
-obj-$(CONFIG_ARCNET) += arcnet/
+obj-$(CONFIG_WLAN) += wireless/
+obj-$(CONFIG_WIMAX) += wimax/
+
+obj-$(CONFIG_VMXNET3) += vmxnet3/
+obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
 
 obj-$(CONFIG_USB_CATC)          += usb/
 obj-$(CONFIG_USB_KAWETH)        += usb/
@@ -52,17 +57,3 @@ obj-$(CONFIG_USB_USBNET)        += usb/
 obj-$(CONFIG_USB_ZD1201)        += usb/
 obj-$(CONFIG_USB_IPHETH)        += usb/
 obj-$(CONFIG_USB_CDC_PHONET)   += usb/
-
-obj-$(CONFIG_WLAN) += wireless/
-obj-$(CONFIG_HAMRADIO) += hamradio/
-obj-$(CONFIG_IRDA) += irda/
-obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-
-obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
-
-obj-$(CONFIG_WIMAX) += wimax/
-obj-$(CONFIG_CAIF) += caif/
-
-obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 84fb634..a73d9dc 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig ARCNET
 	depends on NETDEVICES && (ISA || PCI || PCMCIA)
-	tristate "ARCnet support"
+	bool "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index a702443..bb88e12 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig PHYLIB
-	tristate "PHY Device support and infrastructure"
+	bool "PHY Device support and infrastructure"
 	depends on !S390
 	depends on NETDEVICES
 	help
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 0f70158..c7e0149 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -4,7 +4,7 @@
 
 # So far, we only have PCI, ISA, and MCA token ring devices
 menuconfig TR
-	tristate "Token Ring driver support"
+	bool "Token Ring driver support"
 	depends on NETDEVICES && !UML
 	depends on (PCI || ISA || MCA || CCW || PCMCIA)
 	select LLC
-- 
1.7.6

^ permalink raw reply related

* [net-next 10/10] drivers/net/ethernet/*: Enabled vendor Kconfig options
From: Jeff Kirsher @ 2011-08-25  4:50 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, Stephen Rothwll
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

Based on finds for Stephen Rothwell, where current defconfig's
enable a ethernet driver and it is not compiled due to the newly
added NET_VENDOR_* component of Kconfig.

This patch enables all the "new" Kconfig options so that current
defconfig's will continue to compile the expected drivers.  In
addition, by enabling all the new Kconfig options does not add
any un-expected options.

CC: Stephen Rothwll <sfc@canb.auug.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/3com/Kconfig      |    1 +
 drivers/net/ethernet/8390/Kconfig      |    1 +
 drivers/net/ethernet/adaptec/Kconfig   |    1 +
 drivers/net/ethernet/alteon/Kconfig    |    1 +
 drivers/net/ethernet/amd/Kconfig       |    1 +
 drivers/net/ethernet/apple/Kconfig     |    1 +
 drivers/net/ethernet/atheros/Kconfig   |    1 +
 drivers/net/ethernet/broadcom/Kconfig  |    1 +
 drivers/net/ethernet/brocade/Kconfig   |    1 +
 drivers/net/ethernet/chelsio/Kconfig   |    1 +
 drivers/net/ethernet/cirrus/Kconfig    |    1 +
 drivers/net/ethernet/cisco/Kconfig     |    1 +
 drivers/net/ethernet/dec/Kconfig       |    1 +
 drivers/net/ethernet/dlink/Kconfig     |    1 +
 drivers/net/ethernet/emulex/Kconfig    |    1 +
 drivers/net/ethernet/faraday/Kconfig   |    1 +
 drivers/net/ethernet/freescale/Kconfig |    1 +
 drivers/net/ethernet/fujitsu/Kconfig   |    1 +
 drivers/net/ethernet/hp/Kconfig        |    1 +
 drivers/net/ethernet/i825xx/Kconfig    |    1 +
 drivers/net/ethernet/ibm/Kconfig       |    1 +
 drivers/net/ethernet/intel/Kconfig     |    1 +
 drivers/net/ethernet/marvell/Kconfig   |    1 +
 drivers/net/ethernet/mellanox/Kconfig  |    1 +
 drivers/net/ethernet/micrel/Kconfig    |    1 +
 drivers/net/ethernet/microchip/Kconfig |    1 +
 drivers/net/ethernet/myricom/Kconfig   |    1 +
 drivers/net/ethernet/natsemi/Kconfig   |    1 +
 drivers/net/ethernet/neterion/Kconfig  |    1 +
 drivers/net/ethernet/nuvoton/Kconfig   |    1 +
 drivers/net/ethernet/nvidia/Kconfig    |    1 +
 drivers/net/ethernet/oki-semi/Kconfig  |    1 +
 drivers/net/ethernet/pasemi/Kconfig    |    1 +
 drivers/net/ethernet/qlogic/Kconfig    |    1 +
 drivers/net/ethernet/racal/Kconfig     |    1 +
 drivers/net/ethernet/rdc/Kconfig       |    1 +
 drivers/net/ethernet/realtek/Kconfig   |    1 +
 drivers/net/ethernet/seeq/Kconfig      |    1 +
 drivers/net/ethernet/sgi/Kconfig       |    1 +
 drivers/net/ethernet/sis/Kconfig       |    1 +
 drivers/net/ethernet/smsc/Kconfig      |    1 +
 drivers/net/ethernet/stmicro/Kconfig   |    1 +
 drivers/net/ethernet/sun/Kconfig       |    1 +
 drivers/net/ethernet/tehuti/Kconfig    |    1 +
 drivers/net/ethernet/ti/Kconfig        |    1 +
 drivers/net/ethernet/toshiba/Kconfig   |    1 +
 drivers/net/ethernet/tundra/Kconfig    |    1 +
 drivers/net/ethernet/via/Kconfig       |    1 +
 drivers/net/ethernet/xilinx/Kconfig    |    1 +
 drivers/net/ethernet/xircom/Kconfig    |    1 +
 drivers/net/ethernet/xscale/Kconfig    |    1 +
 51 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 65cc129..a439cbd 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_3COM
 	bool "3Com devices"
+	default y
 	depends on ISA || EISA || MCA || PCI || PCMCIA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 5d21698..e04ade4 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_8390
 	bool "National Semi-conductor 8390 devices"
+	default y
 	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
 		   ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
 		   MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
index 5e9dbe9..5c804bb 100644
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_ADAPTEC
 	bool "Adaptec devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig
index 68862e4..799a852 100644
--- a/drivers/net/ethernet/alteon/Kconfig
+++ b/drivers/net/ethernet/alteon/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_ALTEON
 	bool "Alteon devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index 0513940..8af1c93 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_AMD
 	bool "AMD devices"
+	default y
 	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
 		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
 		   (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
index fc796bc..59d5c26 100644
--- a/drivers/net/ethernet/apple/Kconfig
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_APPLE
 	bool "Apple devices"
+	default y
 	depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \
 		   || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
 	---help---
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
index 966c6c7..26ab8ca 100644
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_ATHEROS
 	bool "Atheros devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 8986e57..d82ad22 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_BROADCOM
 	bool "Broadcom devices"
+	default y
 	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
 		   SIBYTE_SB1xxx_SOC
 	---help---
diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig
index 03f0b17..2641557 100644
--- a/drivers/net/ethernet/brocade/Kconfig
+++ b/drivers/net/ethernet/brocade/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_BROCADE
 	bool "Brocade devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
index 7b54574..2de50f9 100644
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_CHELSIO
 	bool "Chelsio devices"
+	default y
 	depends on PCI || INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 53ebe78..e0cacf6 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_CIRRUS
 	bool "Cirrus devices"
+	default y
 	depends on ARM && ARCH_EP93XX
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig
index bbd5348..94606f7 100644
--- a/drivers/net/ethernet/cisco/Kconfig
+++ b/drivers/net/ethernet/cisco/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_CISCO
 	bool "Cisco devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
index 40e8df9..3794027 100644
--- a/drivers/net/ethernet/dec/Kconfig
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_DEC
 	bool "Digital Equipment devices"
+	default y
 	depends on PCI || EISA || CARDBUS
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index 9fdb66b..84a28a6 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_DLINK
 	bool "D-Link devices"
+	default y
 	depends on PCI || PARPORT
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/emulex/Kconfig b/drivers/net/ethernet/emulex/Kconfig
index 018ac94..7a28a64 100644
--- a/drivers/net/ethernet/emulex/Kconfig
+++ b/drivers/net/ethernet/emulex/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_EMULEX
 	bool "Emulex devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index b0d76f0..5918c68 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_FARADAY
 	bool "Faraday devices"
+	default y
 	depends on ARM
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 2fd2c61..4dbe41f 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_FREESCALE
 	bool "Freescale devices"
+	default y
 	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
 		   M523x || M527x || M5272 || M528x || M520x || M532x || \
 		   IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index 2cd968e..dffee9d 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_FUJITSU
 	bool "Fujitsu devices"
+	default y
 	depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/hp/Kconfig b/drivers/net/ethernet/hp/Kconfig
index 07b42e9..a0b8ece 100644
--- a/drivers/net/ethernet/hp/Kconfig
+++ b/drivers/net/ethernet/hp/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_HP
 	bool "HP devices"
+	default y
 	depends on ISA || EISA || PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index 5c30a5b..2be4698 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_I825XX
 	bool "Intel (82586/82593/82596) devices"
+	default y
 	depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
 		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
 		   GSC || BVME6000 || MVME16x || EXPERIMENTAL)
diff --git a/drivers/net/ethernet/ibm/Kconfig b/drivers/net/ethernet/ibm/Kconfig
index 4c7ef98..9e16f3f 100644
--- a/drivers/net/ethernet/ibm/Kconfig
+++ b/drivers/net/ethernet/ibm/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_IBM
 	bool "IBM devices"
+	default y
 	depends on MCA || PPC_PSERIES || PPC_PSERIES || PPC_DCR || \
 		   (IBMEBUS && INET && SPARSEMEM)
 	---help---
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 5fe185b..4a98e83 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_INTEL
 	bool "Intel devices"
+	default y
 	depends on PCI || PCI_MSI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index e525408..0029934 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MARVELL
 	bool "Marvell devices"
+	default y
 	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
index e069491..d8099a7 100644
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MELLANOX
 	bool "Mellanox devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index 4227de6..bd090db 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MICREL
 	bool "Micrel devices"
+	default y
 	depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
 		   (ARM && ARCH_KS8695)
 	---help---
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
index 53b0b04..8163fd0 100644
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MICROCHIP
 	bool "Microchip devices"
+	default y
 	depends on SPI && EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig
index 1816ae1..540f0c6 100644
--- a/drivers/net/ethernet/myricom/Kconfig
+++ b/drivers/net/ethernet/myricom/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MYRI
 	bool "Myricom devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
index 1e5c1e1..4a6b9fd 100644
--- a/drivers/net/ethernet/natsemi/Kconfig
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_NATSEMI
 	bool "National Semi-conductor devices"
+	default y
 	depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig
index 3d98e62..ff26b54 100644
--- a/drivers/net/ethernet/neterion/Kconfig
+++ b/drivers/net/ethernet/neterion/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_EXAR
 	bool "Exar devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say
diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
index 3b91c3b..01182b5 100644
--- a/drivers/net/ethernet/nuvoton/Kconfig
+++ b/drivers/net/ethernet/nuvoton/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_NUVOTON
 	bool "Nuvoton devices"
+	default y
 	depends on ARM && ARCH_W90X900
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/nvidia/Kconfig b/drivers/net/ethernet/nvidia/Kconfig
index 0a18e73..ace19e7 100644
--- a/drivers/net/ethernet/nvidia/Kconfig
+++ b/drivers/net/ethernet/nvidia/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_NVIDIA
 	bool "NVIDIA devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig
index 97f5e72..ecd45f9 100644
--- a/drivers/net/ethernet/oki-semi/Kconfig
+++ b/drivers/net/ethernet/oki-semi/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_OKI
 	bool "OKI Semiconductor devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig
index ccb79b8..01e6c32 100644
--- a/drivers/net/ethernet/pasemi/Kconfig
+++ b/drivers/net/ethernet/pasemi/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_PASEMI
 	bool "PA Semi devices"
+	default y
 	depends on PPC_PASEMI && PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
index a7c4424..a8669ad 100644
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_QLOGIC
 	bool "QLogic devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/racal/Kconfig b/drivers/net/ethernet/racal/Kconfig
index 45d4930..01969e0 100644
--- a/drivers/net/ethernet/racal/Kconfig
+++ b/drivers/net/ethernet/racal/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI devices"
+	default y
 	depends on ISA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, such
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
index b15ebac..2055f7e 100644
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_RDC
 	bool "RDC devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index a5f67a09..d8df67a 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_REALTEK
 	bool "Realtek devices"
+	default y
 	depends on PCI || (PARPORT && X86)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig
index 0266791..49b6d5b 100644
--- a/drivers/net/ethernet/seeq/Kconfig
+++ b/drivers/net/ethernet/seeq/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SEEQ
 	bool "SEEQ devices"
+	default y
 	depends on (ARM && ARCH_ACORN) || SGI_HAS_SEEQ || EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
index 3098594..e832f46 100644
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SGI
 	bool "SGI devices"
+	default y
 	depends on (PCI && SGI_IP27) || SGI_IP32
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index 01d43e8..68d052b 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SIS
 	bool "Silicon Integrated Systems (SiS) devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 702efe6..f961928 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SMSC
 	bool "SMC (SMSC)/Western Digital devices"
+	default y
 	depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \
 		BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA
 	---help---
diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig
index e40df64..f4a80da 100644
--- a/drivers/net/ethernet/stmicro/Kconfig
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_STMICRO
 	bool "STMicroelectronics devices"
+	default y
 	depends on HAS_IOMEM
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig
index 5132fa6..57bfd85 100644
--- a/drivers/net/ethernet/sun/Kconfig
+++ b/drivers/net/ethernet/sun/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SUN
 	bool "Sun devices"
+	default y
 	depends on SUN3 || SBUS || PCI || SUN_LDOMS
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig
index 914ad4059..1fc027e 100644
--- a/drivers/net/ethernet/tehuti/Kconfig
+++ b/drivers/net/ethernet/tehuti/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TEHUTI
 	bool "Tehuti devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 1284319..de76c70 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TI
 	bool "Texas Instruments (TI) devices"
+	default y
 	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig
index 6ef2ce2..0517647 100644
--- a/drivers/net/ethernet/toshiba/Kconfig
+++ b/drivers/net/ethernet/toshiba/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TOSHIBA
 	bool "Toshiba devices"
+	default y
 	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig
index 03925d1..cf7d69b 100644
--- a/drivers/net/ethernet/tundra/Kconfig
+++ b/drivers/net/ethernet/tundra/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TUNDRA
 	bool "Tundra devices"
+	default y
 	depends on TSI108_BRIDGE
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index 7199194..e5d82a5 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_VIA
 	bool "VIA devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 4e3aad4..d5a8260 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_XILINX
 	bool "Xilinx devices"
+	default y
 	depends on PPC || PPC32 || MICROBLAZE
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
index 3d64e58..69f56a6 100644
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_XIRCOM
 	bool "Xircom devices"
+	default y
 	depends on PCMCIA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 6bbcc54..cf67352 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_VENDOR_XSCALE
 	bool "Intel XScale IXP devices"
+	default y
 	depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
 		   IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
 	---help---
-- 
1.7.6

^ permalink raw reply related

* Re: [omega-g1:11110] Re: [PATCH] net: configurable sysctl parameter "net.core.tcp_lowat" for sk_stream_min_wspace()
From: David Miller @ 2011-08-25  5:00 UTC (permalink / raw)
  To: jun.kondo
  Cc: linux-kernel, omega-g1, notsuki, motokazu.kozaki, htaira, netdev,
	tomohiko.takahashi, kotaro.sakai, ken.sugawara
In-Reply-To: <4E55D3C2.40308@ctc-g.co.jp>

From: "Jun.Kondo" <jun.kondo@ctc-g.co.jp>
Date: Thu, 25 Aug 2011 13:46:58 +0900

> Currently, once the transmission buffer becomes full, it is not
> possible to write again unless there is one third of free space
> in the transmission buffer.

Then use a non-blocking socket if you don't want to block.

We're talking in circles, and will walk down the same discussions
again.  You have still not shown what real limitation is created
by the way things work currently.

I've said everything that I can, and I will thus recuse myself from
the rest of this discussion since I really can't add anything more.

^ permalink raw reply

* linux-next: build failure after merge of the staging tree
From: Stephen Rothwell @ 2011-08-25  5:02 UTC (permalink / raw)
  To: Greg KH
  Cc: linux-next, linux-kernel, wlanfae, Larry Finger, Jiri Pirko,
	David Miller, netdev

Hi Greg,

After merging the staging tree, today's linux-next build (x86_64
allmodconfig) failed like this:

drivers/staging/rtl8192e/rtl_core.c:2917:2: error: unknown field 'ndo_set_multicast_list' specified in initializer

Caused by commit 94a799425eee ("From: wlanfae <wlanfae@realtek.com>" -
really "[PATCH 1/8] rtl8192e: Import new version of driver from realtek"
Larry, that patch was badly imported ...) interacting with commit
b81693d9149c ("net: remove ndo_set_multicast_list callback") from the net
tree.

I applied the following patch (which seems to be what was done to the
other drivers in the net tree - there is probably more required):

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 25 Aug 2011 14:57:55 +1000
Subject: [PATCH] rtl8192e: update for ndo_set_multicast_list removal.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/staging/rtl8192e/rtl_core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl_core.c
index f8a13d9..b38f626 100644
--- a/drivers/staging/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl_core.c
@@ -2914,7 +2914,7 @@ static const struct net_device_ops rtl8192_netdev_ops = {
 	.ndo_stop = rtl8192_close,
 	.ndo_tx_timeout = rtl8192_tx_timeout,
 	.ndo_do_ioctl = rtl8192_ioctl,
-	.ndo_set_multicast_list = r8192_set_multicast,
+	.ndo_set_rx_mode = r8192_set_multicast,
 	.ndo_set_mac_address = r8192_set_mac_adr,
 	.ndo_validate_addr = eth_validate_addr,
 	.ndo_change_mtu = eth_change_mtu,
-- 
1.7.5.4

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

^ permalink raw reply related

* Re: [net-next 00/10][pull request] Complete drivers/net/ move
From: David Miller @ 2011-08-25  5:04 UTC (permalink / raw)
  To: jeffrey.t.kirsher; +Cc: netdev, gospo
In-Reply-To: <1314247835-24586-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 24 Aug 2011 21:50:25 -0700

> The following are changes since commit 0856a304091b33a8e8f9f9c98e776f425af2b625:
>   Scm: Remove unnecessary pid & credential references in Unix socket's send and receive path
> and are available in the git repository at:
>   master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master

Still fails.

Jeff, I'm not pulling any more, you're simply not testing this
properly.  You need to sit on this for a few days and start properly
sanity checking what you're sending me.  I should not get a broken
build when I just type make on an "allmodconfig" tree right after
I pull from you.

Repeat, that should never happen, ever.

It's not rocket science what I do to sanity test this.

Take a vanilla net-next tree, "make allmodconfig" and build it.

Pull your tree, "make oldconfig" and try to build it again, it fails.

Why aren't you testing that?  Because that's the first thing the rest
of the world, especially everyone validating the -next tree, is going
to do.

ERROR: "pppox_ioctl" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "unregister_pppox_proto" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "register_pppox_proto" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "ppp_input" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "pppox_unbind_sock" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "ppp_register_net_channel" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "ppp_dev_name" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "ppp_unit_number" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_unregister_channel" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_output_wakeup" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_input_error" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_input" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_register_channel" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_channel_index" [net/irda/irnet/irnet.ko] undefined!
ERROR: "ppp_input_error" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_input" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_unregister_channel" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_output_wakeup" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_unit_number" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_channel_index" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_register_channel" [net/atm/pppoatm.ko] undefined!
ERROR: "ppp_unit_number" [drivers/tty/ipwireless/ipwireless.ko] undefined!
ERROR: "ppp_unregister_channel" [drivers/tty/ipwireless/ipwireless.ko] undefined!
ERROR: "ppp_output_wakeup" [drivers/tty/ipwireless/ipwireless.ko] undefined!
ERROR: "ppp_input" [drivers/tty/ipwireless/ipwireless.ko] undefined!
ERROR: "ppp_register_channel" [drivers/tty/ipwireless/ipwireless.ko] undefined!
ERROR: "ppp_channel_index" [drivers/tty/ipwireless/ipwireless.ko] undefined!
ERROR: "slhc_init" [drivers/isdn/i4l/isdn.ko] undefined!
ERROR: "slhc_remember" [drivers/isdn/i4l/isdn.ko] undefined!
ERROR: "slhc_uncompress" [drivers/isdn/i4l/isdn.ko] undefined!
ERROR: "slhc_free" [drivers/isdn/i4l/isdn.ko] undefined!
ERROR: "slhc_compress" [drivers/isdn/i4l/isdn.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
make: *** Waiting for unfinished jobs....
Succeed: decoded and checked 1378429 instructions
Setup is 16588 bytes (padded to 16896 bytes).
System is 4577 kB
CRC b144d738
Kernel: arch/x86/boot/bzImage is ready  (#51)

^ permalink raw reply

page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox