* include/net/netlink.h:497:41: warning: ‘reply_nlh’ may be used uninitialized in this function [-Wuninitialized]
From: wfg @ 2012-06-14 2:07 UTC (permalink / raw)
To: Thomas Graf; +Cc: netdev, netdev, David S. Miller
[-- Attachment #1: Type: text/plain, Size: 885 bytes --]
FYI: there are new compile warnings show up in
tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master
head: 0450243096de90ff51c3a6c605410c5e28d79f8d
commit: 33a03aadb52fa05d28aba6d8f0c03c7b3b905897 [464/472] dcbnl: Prepare framework to shorten handling functions
config: x86_64-randconfig-net3 (attached as .config)
All related error/warning messages are:
net/dcb/dcbnl.c: In function ‘dcb_doit’:
include/net/netlink.h:497:41: warning: ‘reply_nlh’ may be used uninitialized in this function [-Wuninitialized]
net/dcb/dcbnl.c:1975:19: note: ‘reply_nlh’ was declared here
This is an auto and one-shot notification for new warnings.
It's perfectly fine to ignore it if the code is known good.
---
0-DAY kernel build testing backend Open Source Technology Centre
Fengguang Wu <wfg@linux.intel.com> Intel Corporation
[-- Attachment #2: 0001-dcbnl-Prepare-framework-to-shorten-handling-function.patch --]
[-- Type: text/x-diff, Size: 4141 bytes --]
>From 33a03aadb52fa05d28aba6d8f0c03c7b3b905897 Mon Sep 17 00:00:00 2001
From: Thomas Graf <tgraf@suug.ch>
Date: Wed, 13 Jun 2012 02:54:54 +0000
Subject: [PATCH] dcbnl: Prepare framework to shorten handling functions
There is no need to allocate and send the reply message in each
handling function separately. Instead, the reply skb can be allocated
and sent in dcb_doit() directly.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
net/dcb/dcbnl.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 656c7c7..5520e43 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -190,18 +190,46 @@ static const struct nla_policy dcbnl_featcfg_nest[DCB_FEATCFG_ATTR_MAX + 1] = {
[DCB_FEATCFG_ATTR_ALL] = {.type = NLA_FLAG},
[DCB_FEATCFG_ATTR_PG] = {.type = NLA_U8},
[DCB_FEATCFG_ATTR_PFC] = {.type = NLA_U8},
[DCB_FEATCFG_ATTR_APP] = {.type = NLA_U8},
};
static LIST_HEAD(dcb_app_list);
static DEFINE_SPINLOCK(dcb_lock);
+static struct sk_buff *dcbnl_newmsg(int type, u8 cmd, u32 port, u32 seq,
+ u32 flags, struct nlmsghdr **nlhp)
+{
+ struct sk_buff *skb;
+ struct dcbmsg *dcb;
+ struct nlmsghdr *nlh;
+
+ skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!skb)
+ return NULL;
+
+ nlh = nlmsg_put(skb, port, seq, type, sizeof(*dcb), flags);
+ if (!nlh) {
+ /* header should always fit, allocation must be buggy */
+ BUG();
+ }
+
+ dcb = nlmsg_data(nlh);
+ dcb->dcb_family = AF_UNSPEC;
+ dcb->cmd = cmd;
+ dcb->dcb_pad = 0;
+
+ if (nlhp)
+ *nlhp = nlh;
+
+ return skb;
+}
+
/* standard netlink reply call */
static int dcbnl_reply(u8 value, u8 event, u8 cmd, u8 attr, u32 pid,
u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct dcbmsg *dcb;
struct nlmsghdr *nlh;
int ret = -EINVAL;
@@ -1916,45 +1944,88 @@ static int dcbnl_cee_get(struct net_device *netdev, struct nlattr **tb,
nlmsg_cancel(skb, nlh);
nlmsg_free(skb);
} else {
nlmsg_end(skb, nlh);
err = rtnl_unicast(skb, net, pid);
}
return err;
}
+struct reply_func {
+ /* reply netlink message type */
+ int type;
+
+ /* function to fill message contents */
+ int (*cb)(struct net_device *, struct nlmsghdr *, u32,
+ struct nlattr **, struct sk_buff *);
+};
+
+static const struct reply_func reply_funcs[DCB_CMD_MAX+1] = {
+ /* FIXME: add reply defs */
+};
+
static int dcb_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
{
struct net *net = sock_net(skb->sk);
struct net_device *netdev;
struct dcbmsg *dcb = (struct dcbmsg *)NLMSG_DATA(nlh);
struct nlattr *tb[DCB_ATTR_MAX + 1];
u32 pid = skb ? NETLINK_CB(skb).pid : 0;
int ret = -EINVAL;
+ struct sk_buff *reply_skb;
+ struct nlmsghdr *reply_nlh;
+ const struct reply_func *fn;
if (!net_eq(net, &init_net))
return -EINVAL;
ret = nlmsg_parse(nlh, sizeof(*dcb), tb, DCB_ATTR_MAX,
dcbnl_rtnl_policy);
if (ret < 0)
return ret;
+ if (dcb->cmd > DCB_CMD_MAX)
+ return -EINVAL;
+
+ /* check if a reply function has been defined for the command */
+ fn = &reply_funcs[dcb->cmd];
+ if (!fn->cb)
+ return -EOPNOTSUPP;
+
if (!tb[DCB_ATTR_IFNAME])
return -EINVAL;
netdev = dev_get_by_name(&init_net, nla_data(tb[DCB_ATTR_IFNAME]));
if (!netdev)
return -EINVAL;
if (!netdev->dcbnl_ops)
goto errout;
+ reply_skb = dcbnl_newmsg(fn->type, dcb->cmd, pid, nlh->nlmsg_seq,
+ nlh->nlmsg_flags, &reply_nlh);
+ if (!reply_skb) {
+ ret = -ENOBUFS;
+ goto out;
+ }
+
+ ret = fn->cb(netdev, nlh, nlh->nlmsg_seq, tb, reply_skb);
+ if (ret < 0) {
+ nlmsg_free(reply_skb);
+ goto out;
+ }
+
+ nlmsg_end(reply_skb, reply_nlh);
+
+ ret = rtnl_unicast(reply_skb, &init_net, pid);
+ if (ret)
+ goto out;
+
switch (dcb->cmd) {
case DCB_CMD_GSTATE:
ret = dcbnl_getstate(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PFC_GCFG:
ret = dcbnl_getpfccfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
--
1.7.10
[-- Attachment #3: dcbnl.c --]
[-- Type: text/x-csrc, Size: 59400 bytes --]
/*
* Copyright (c) 2008-2011, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
* Author: Lucy Liu <lucy.liu@intel.com>
*/
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/slab.h>
#include <net/netlink.h>
#include <net/rtnetlink.h>
#include <linux/dcbnl.h>
#include <net/dcbevent.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <net/sock.h>
/**
* Data Center Bridging (DCB) is a collection of Ethernet enhancements
* intended to allow network traffic with differing requirements
* (highly reliable, no drops vs. best effort vs. low latency) to operate
* and co-exist on Ethernet. Current DCB features are:
*
* Enhanced Transmission Selection (aka Priority Grouping [PG]) - provides a
* framework for assigning bandwidth guarantees to traffic classes.
*
* Priority-based Flow Control (PFC) - provides a flow control mechanism which
* can work independently for each 802.1p priority.
*
* Congestion Notification - provides a mechanism for end-to-end congestion
* control for protocols which do not have built-in congestion management.
*
* More information about the emerging standards for these Ethernet features
* can be found at: http://www.ieee802.org/1/pages/dcbridges.html
*
* This file implements an rtnetlink interface to allow configuration of DCB
* features for capable devices.
*/
MODULE_AUTHOR("Lucy Liu, <lucy.liu@intel.com>");
MODULE_DESCRIPTION("Data Center Bridging netlink interface");
MODULE_LICENSE("GPL");
/**************** DCB attribute policies *************************************/
/* DCB netlink attributes policy */
static const struct nla_policy dcbnl_rtnl_policy[DCB_ATTR_MAX + 1] = {
[DCB_ATTR_IFNAME] = {.type = NLA_NUL_STRING, .len = IFNAMSIZ - 1},
[DCB_ATTR_STATE] = {.type = NLA_U8},
[DCB_ATTR_PFC_CFG] = {.type = NLA_NESTED},
[DCB_ATTR_PG_CFG] = {.type = NLA_NESTED},
[DCB_ATTR_SET_ALL] = {.type = NLA_U8},
[DCB_ATTR_PERM_HWADDR] = {.type = NLA_FLAG},
[DCB_ATTR_CAP] = {.type = NLA_NESTED},
[DCB_ATTR_PFC_STATE] = {.type = NLA_U8},
[DCB_ATTR_BCN] = {.type = NLA_NESTED},
[DCB_ATTR_APP] = {.type = NLA_NESTED},
[DCB_ATTR_IEEE] = {.type = NLA_NESTED},
[DCB_ATTR_DCBX] = {.type = NLA_U8},
[DCB_ATTR_FEATCFG] = {.type = NLA_NESTED},
};
/* DCB priority flow control to User Priority nested attributes */
static const struct nla_policy dcbnl_pfc_up_nest[DCB_PFC_UP_ATTR_MAX + 1] = {
[DCB_PFC_UP_ATTR_0] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_1] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_2] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_3] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_4] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_5] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_6] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_7] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};
/* DCB priority grouping nested attributes */
static const struct nla_policy dcbnl_pg_nest[DCB_PG_ATTR_MAX + 1] = {
[DCB_PG_ATTR_TC_0] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_1] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_2] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_3] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_4] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_5] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_6] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_7] = {.type = NLA_NESTED},
[DCB_PG_ATTR_TC_ALL] = {.type = NLA_NESTED},
[DCB_PG_ATTR_BW_ID_0] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_1] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_2] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_3] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_4] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_5] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_6] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_7] = {.type = NLA_U8},
[DCB_PG_ATTR_BW_ID_ALL] = {.type = NLA_FLAG},
};
/* DCB traffic class nested attributes. */
static const struct nla_policy dcbnl_tc_param_nest[DCB_TC_ATTR_PARAM_MAX + 1] = {
[DCB_TC_ATTR_PARAM_PGID] = {.type = NLA_U8},
[DCB_TC_ATTR_PARAM_UP_MAPPING] = {.type = NLA_U8},
[DCB_TC_ATTR_PARAM_STRICT_PRIO] = {.type = NLA_U8},
[DCB_TC_ATTR_PARAM_BW_PCT] = {.type = NLA_U8},
[DCB_TC_ATTR_PARAM_ALL] = {.type = NLA_FLAG},
};
/* DCB capabilities nested attributes. */
static const struct nla_policy dcbnl_cap_nest[DCB_CAP_ATTR_MAX + 1] = {
[DCB_CAP_ATTR_ALL] = {.type = NLA_FLAG},
[DCB_CAP_ATTR_PG] = {.type = NLA_U8},
[DCB_CAP_ATTR_PFC] = {.type = NLA_U8},
[DCB_CAP_ATTR_UP2TC] = {.type = NLA_U8},
[DCB_CAP_ATTR_PG_TCS] = {.type = NLA_U8},
[DCB_CAP_ATTR_PFC_TCS] = {.type = NLA_U8},
[DCB_CAP_ATTR_GSP] = {.type = NLA_U8},
[DCB_CAP_ATTR_BCN] = {.type = NLA_U8},
[DCB_CAP_ATTR_DCBX] = {.type = NLA_U8},
};
/* DCB capabilities nested attributes. */
static const struct nla_policy dcbnl_numtcs_nest[DCB_NUMTCS_ATTR_MAX + 1] = {
[DCB_NUMTCS_ATTR_ALL] = {.type = NLA_FLAG},
[DCB_NUMTCS_ATTR_PG] = {.type = NLA_U8},
[DCB_NUMTCS_ATTR_PFC] = {.type = NLA_U8},
};
/* DCB BCN nested attributes. */
static const struct nla_policy dcbnl_bcn_nest[DCB_BCN_ATTR_MAX + 1] = {
[DCB_BCN_ATTR_RP_0] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_1] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_2] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_3] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_4] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_5] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_6] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_7] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG},
[DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32},
[DCB_BCN_ATTR_BCNA_1] = {.type = NLA_U32},
[DCB_BCN_ATTR_ALPHA] = {.type = NLA_U32},
[DCB_BCN_ATTR_BETA] = {.type = NLA_U32},
[DCB_BCN_ATTR_GD] = {.type = NLA_U32},
[DCB_BCN_ATTR_GI] = {.type = NLA_U32},
[DCB_BCN_ATTR_TMAX] = {.type = NLA_U32},
[DCB_BCN_ATTR_TD] = {.type = NLA_U32},
[DCB_BCN_ATTR_RMIN] = {.type = NLA_U32},
[DCB_BCN_ATTR_W] = {.type = NLA_U32},
[DCB_BCN_ATTR_RD] = {.type = NLA_U32},
[DCB_BCN_ATTR_RU] = {.type = NLA_U32},
[DCB_BCN_ATTR_WRTT] = {.type = NLA_U32},
[DCB_BCN_ATTR_RI] = {.type = NLA_U32},
[DCB_BCN_ATTR_C] = {.type = NLA_U32},
[DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},
};
/* DCB APP nested attributes. */
static const struct nla_policy dcbnl_app_nest[DCB_APP_ATTR_MAX + 1] = {
[DCB_APP_ATTR_IDTYPE] = {.type = NLA_U8},
[DCB_APP_ATTR_ID] = {.type = NLA_U16},
[DCB_APP_ATTR_PRIORITY] = {.type = NLA_U8},
};
/* IEEE 802.1Qaz nested attributes. */
static const struct nla_policy dcbnl_ieee_policy[DCB_ATTR_IEEE_MAX + 1] = {
[DCB_ATTR_IEEE_ETS] = {.len = sizeof(struct ieee_ets)},
[DCB_ATTR_IEEE_PFC] = {.len = sizeof(struct ieee_pfc)},
[DCB_ATTR_IEEE_APP_TABLE] = {.type = NLA_NESTED},
[DCB_ATTR_IEEE_MAXRATE] = {.len = sizeof(struct ieee_maxrate)},
};
static const struct nla_policy dcbnl_ieee_app[DCB_ATTR_IEEE_APP_MAX + 1] = {
[DCB_ATTR_IEEE_APP] = {.len = sizeof(struct dcb_app)},
};
/* DCB number of traffic classes nested attributes. */
static const struct nla_policy dcbnl_featcfg_nest[DCB_FEATCFG_ATTR_MAX + 1] = {
[DCB_FEATCFG_ATTR_ALL] = {.type = NLA_FLAG},
[DCB_FEATCFG_ATTR_PG] = {.type = NLA_U8},
[DCB_FEATCFG_ATTR_PFC] = {.type = NLA_U8},
[DCB_FEATCFG_ATTR_APP] = {.type = NLA_U8},
};
static LIST_HEAD(dcb_app_list);
static DEFINE_SPINLOCK(dcb_lock);
static struct sk_buff *dcbnl_newmsg(int type, u8 cmd, u32 port, u32 seq,
u32 flags, struct nlmsghdr **nlhp)
{
struct sk_buff *skb;
struct dcbmsg *dcb;
struct nlmsghdr *nlh;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
return NULL;
nlh = nlmsg_put(skb, port, seq, type, sizeof(*dcb), flags);
if (!nlh) {
/* header should always fit, allocation must be buggy */
BUG();
}
dcb = nlmsg_data(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = cmd;
dcb->dcb_pad = 0;
if (nlhp)
*nlhp = nlh;
return skb;
}
/* standard netlink reply call */
static int dcbnl_reply(u8 value, u8 event, u8 cmd, u8 attr, u32 pid,
u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct dcbmsg *dcb;
struct nlmsghdr *nlh;
int ret = -EINVAL;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
return ret;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, event, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = cmd;
dcb->dcb_pad = 0;
ret = nla_put_u8(dcbnl_skb, attr, value);
if (ret)
goto err;
/* end the message, assign the nlmsg_len. */
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
return -EINVAL;
return 0;
nlmsg_failure:
err:
kfree_skb(dcbnl_skb);
return ret;
}
static int dcbnl_getstate(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret = -EINVAL;
/* if (!tb[DCB_ATTR_STATE] || !netdev->dcbnl_ops->getstate) */
if (!netdev->dcbnl_ops->getstate)
return ret;
ret = dcbnl_reply(netdev->dcbnl_ops->getstate(netdev), RTM_GETDCB,
DCB_CMD_GSTATE, DCB_ATTR_STATE, pid, seq, flags);
return ret;
}
static int dcbnl_getpfccfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *data[DCB_PFC_UP_ATTR_MAX + 1], *nest;
u8 value;
int ret = -EINVAL;
int i;
int getall = 0;
if (!tb[DCB_ATTR_PFC_CFG] || !netdev->dcbnl_ops->getpfccfg)
return ret;
ret = nla_parse_nested(data, DCB_PFC_UP_ATTR_MAX,
tb[DCB_ATTR_PFC_CFG],
dcbnl_pfc_up_nest);
if (ret)
goto err_out;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
goto err_out;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_PFC_GCFG;
nest = nla_nest_start(dcbnl_skb, DCB_ATTR_PFC_CFG);
if (!nest)
goto err;
if (data[DCB_PFC_UP_ATTR_ALL])
getall = 1;
for (i = DCB_PFC_UP_ATTR_0; i <= DCB_PFC_UP_ATTR_7; i++) {
if (!getall && !data[i])
continue;
netdev->dcbnl_ops->getpfccfg(netdev, i - DCB_PFC_UP_ATTR_0,
&value);
ret = nla_put_u8(dcbnl_skb, i, value);
if (ret) {
nla_nest_cancel(dcbnl_skb, nest);
goto err;
}
}
nla_nest_end(dcbnl_skb, nest);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
goto err_out;
return 0;
nlmsg_failure:
err:
kfree_skb(dcbnl_skb);
err_out:
return -EINVAL;
}
static int dcbnl_getperm_hwaddr(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
u8 perm_addr[MAX_ADDR_LEN];
int ret = -EINVAL;
if (!netdev->dcbnl_ops->getpermhwaddr)
return ret;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
goto err_out;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_GPERM_HWADDR;
netdev->dcbnl_ops->getpermhwaddr(netdev, perm_addr);
ret = nla_put(dcbnl_skb, DCB_ATTR_PERM_HWADDR, sizeof(perm_addr),
perm_addr);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
goto err_out;
return 0;
nlmsg_failure:
kfree_skb(dcbnl_skb);
err_out:
return -EINVAL;
}
static int dcbnl_getcap(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *data[DCB_CAP_ATTR_MAX + 1], *nest;
u8 value;
int ret = -EINVAL;
int i;
int getall = 0;
if (!tb[DCB_ATTR_CAP] || !netdev->dcbnl_ops->getcap)
return ret;
ret = nla_parse_nested(data, DCB_CAP_ATTR_MAX, tb[DCB_ATTR_CAP],
dcbnl_cap_nest);
if (ret)
goto err_out;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
goto err_out;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_GCAP;
nest = nla_nest_start(dcbnl_skb, DCB_ATTR_CAP);
if (!nest)
goto err;
if (data[DCB_CAP_ATTR_ALL])
getall = 1;
for (i = DCB_CAP_ATTR_ALL+1; i <= DCB_CAP_ATTR_MAX; i++) {
if (!getall && !data[i])
continue;
if (!netdev->dcbnl_ops->getcap(netdev, i, &value)) {
ret = nla_put_u8(dcbnl_skb, i, value);
if (ret) {
nla_nest_cancel(dcbnl_skb, nest);
goto err;
}
}
}
nla_nest_end(dcbnl_skb, nest);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
goto err_out;
return 0;
nlmsg_failure:
err:
kfree_skb(dcbnl_skb);
err_out:
return -EINVAL;
}
static int dcbnl_getnumtcs(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *data[DCB_NUMTCS_ATTR_MAX + 1], *nest;
u8 value;
int ret = -EINVAL;
int i;
int getall = 0;
if (!tb[DCB_ATTR_NUMTCS] || !netdev->dcbnl_ops->getnumtcs)
return ret;
ret = nla_parse_nested(data, DCB_NUMTCS_ATTR_MAX, tb[DCB_ATTR_NUMTCS],
dcbnl_numtcs_nest);
if (ret) {
ret = -EINVAL;
goto err_out;
}
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb) {
ret = -EINVAL;
goto err_out;
}
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_GNUMTCS;
nest = nla_nest_start(dcbnl_skb, DCB_ATTR_NUMTCS);
if (!nest) {
ret = -EINVAL;
goto err;
}
if (data[DCB_NUMTCS_ATTR_ALL])
getall = 1;
for (i = DCB_NUMTCS_ATTR_ALL+1; i <= DCB_NUMTCS_ATTR_MAX; i++) {
if (!getall && !data[i])
continue;
ret = netdev->dcbnl_ops->getnumtcs(netdev, i, &value);
if (!ret) {
ret = nla_put_u8(dcbnl_skb, i, value);
if (ret) {
nla_nest_cancel(dcbnl_skb, nest);
ret = -EINVAL;
goto err;
}
} else {
goto err;
}
}
nla_nest_end(dcbnl_skb, nest);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret) {
ret = -EINVAL;
goto err_out;
}
return 0;
nlmsg_failure:
err:
kfree_skb(dcbnl_skb);
err_out:
return ret;
}
static int dcbnl_setnumtcs(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct nlattr *data[DCB_NUMTCS_ATTR_MAX + 1];
int ret = -EINVAL;
u8 value;
int i;
if (!tb[DCB_ATTR_NUMTCS] || !netdev->dcbnl_ops->setnumtcs)
return ret;
ret = nla_parse_nested(data, DCB_NUMTCS_ATTR_MAX, tb[DCB_ATTR_NUMTCS],
dcbnl_numtcs_nest);
if (ret) {
ret = -EINVAL;
goto err;
}
for (i = DCB_NUMTCS_ATTR_ALL+1; i <= DCB_NUMTCS_ATTR_MAX; i++) {
if (data[i] == NULL)
continue;
value = nla_get_u8(data[i]);
ret = netdev->dcbnl_ops->setnumtcs(netdev, i, value);
if (ret)
goto operr;
}
operr:
ret = dcbnl_reply(!!ret, RTM_SETDCB, DCB_CMD_SNUMTCS,
DCB_ATTR_NUMTCS, pid, seq, flags);
err:
return ret;
}
static int dcbnl_getpfcstate(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret = -EINVAL;
if (!netdev->dcbnl_ops->getpfcstate)
return ret;
ret = dcbnl_reply(netdev->dcbnl_ops->getpfcstate(netdev), RTM_GETDCB,
DCB_CMD_PFC_GSTATE, DCB_ATTR_PFC_STATE,
pid, seq, flags);
return ret;
}
static int dcbnl_setpfcstate(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret = -EINVAL;
u8 value;
if (!tb[DCB_ATTR_PFC_STATE] || !netdev->dcbnl_ops->setpfcstate)
return ret;
value = nla_get_u8(tb[DCB_ATTR_PFC_STATE]);
netdev->dcbnl_ops->setpfcstate(netdev, value);
ret = dcbnl_reply(0, RTM_SETDCB, DCB_CMD_PFC_SSTATE, DCB_ATTR_PFC_STATE,
pid, seq, flags);
return ret;
}
static int dcbnl_getapp(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *app_nest;
struct nlattr *app_tb[DCB_APP_ATTR_MAX + 1];
u16 id;
u8 up, idtype;
int ret = -EINVAL;
if (!tb[DCB_ATTR_APP])
goto out;
ret = nla_parse_nested(app_tb, DCB_APP_ATTR_MAX, tb[DCB_ATTR_APP],
dcbnl_app_nest);
if (ret)
goto out;
ret = -EINVAL;
/* all must be non-null */
if ((!app_tb[DCB_APP_ATTR_IDTYPE]) ||
(!app_tb[DCB_APP_ATTR_ID]))
goto out;
/* either by eth type or by socket number */
idtype = nla_get_u8(app_tb[DCB_APP_ATTR_IDTYPE]);
if ((idtype != DCB_APP_IDTYPE_ETHTYPE) &&
(idtype != DCB_APP_IDTYPE_PORTNUM))
goto out;
id = nla_get_u16(app_tb[DCB_APP_ATTR_ID]);
if (netdev->dcbnl_ops->getapp) {
up = netdev->dcbnl_ops->getapp(netdev, idtype, id);
} else {
struct dcb_app app = {
.selector = idtype,
.protocol = id,
};
up = dcb_getapp(netdev, &app);
}
/* send this back */
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
goto out;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_GAPP;
app_nest = nla_nest_start(dcbnl_skb, DCB_ATTR_APP);
if (!app_nest)
goto out_cancel;
ret = nla_put_u8(dcbnl_skb, DCB_APP_ATTR_IDTYPE, idtype);
if (ret)
goto out_cancel;
ret = nla_put_u16(dcbnl_skb, DCB_APP_ATTR_ID, id);
if (ret)
goto out_cancel;
ret = nla_put_u8(dcbnl_skb, DCB_APP_ATTR_PRIORITY, up);
if (ret)
goto out_cancel;
nla_nest_end(dcbnl_skb, app_nest);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
goto nlmsg_failure;
goto out;
out_cancel:
nla_nest_cancel(dcbnl_skb, app_nest);
nlmsg_failure:
kfree_skb(dcbnl_skb);
out:
return ret;
}
static int dcbnl_setapp(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int err, ret = -EINVAL;
u16 id;
u8 up, idtype;
struct nlattr *app_tb[DCB_APP_ATTR_MAX + 1];
if (!tb[DCB_ATTR_APP])
goto out;
ret = nla_parse_nested(app_tb, DCB_APP_ATTR_MAX, tb[DCB_ATTR_APP],
dcbnl_app_nest);
if (ret)
goto out;
ret = -EINVAL;
/* all must be non-null */
if ((!app_tb[DCB_APP_ATTR_IDTYPE]) ||
(!app_tb[DCB_APP_ATTR_ID]) ||
(!app_tb[DCB_APP_ATTR_PRIORITY]))
goto out;
/* either by eth type or by socket number */
idtype = nla_get_u8(app_tb[DCB_APP_ATTR_IDTYPE]);
if ((idtype != DCB_APP_IDTYPE_ETHTYPE) &&
(idtype != DCB_APP_IDTYPE_PORTNUM))
goto out;
id = nla_get_u16(app_tb[DCB_APP_ATTR_ID]);
up = nla_get_u8(app_tb[DCB_APP_ATTR_PRIORITY]);
if (netdev->dcbnl_ops->setapp) {
err = netdev->dcbnl_ops->setapp(netdev, idtype, id, up);
} else {
struct dcb_app app;
app.selector = idtype;
app.protocol = id;
app.priority = up;
err = dcb_setapp(netdev, &app);
}
ret = dcbnl_reply(err, RTM_SETDCB, DCB_CMD_SAPP, DCB_ATTR_APP,
pid, seq, flags);
dcbnl_cee_notify(netdev, RTM_SETDCB, DCB_CMD_SAPP, seq, 0);
out:
return ret;
}
static int __dcbnl_pg_getcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags, int dir)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *pg_nest, *param_nest, *data;
struct nlattr *pg_tb[DCB_PG_ATTR_MAX + 1];
struct nlattr *param_tb[DCB_TC_ATTR_PARAM_MAX + 1];
u8 prio, pgid, tc_pct, up_map;
int ret = -EINVAL;
int getall = 0;
int i;
if (!tb[DCB_ATTR_PG_CFG] ||
!netdev->dcbnl_ops->getpgtccfgtx ||
!netdev->dcbnl_ops->getpgtccfgrx ||
!netdev->dcbnl_ops->getpgbwgcfgtx ||
!netdev->dcbnl_ops->getpgbwgcfgrx)
return ret;
ret = nla_parse_nested(pg_tb, DCB_PG_ATTR_MAX,
tb[DCB_ATTR_PG_CFG], dcbnl_pg_nest);
if (ret)
goto err_out;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
goto err_out;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = (dir) ? DCB_CMD_PGRX_GCFG : DCB_CMD_PGTX_GCFG;
pg_nest = nla_nest_start(dcbnl_skb, DCB_ATTR_PG_CFG);
if (!pg_nest)
goto err;
if (pg_tb[DCB_PG_ATTR_TC_ALL])
getall = 1;
for (i = DCB_PG_ATTR_TC_0; i <= DCB_PG_ATTR_TC_7; i++) {
if (!getall && !pg_tb[i])
continue;
if (pg_tb[DCB_PG_ATTR_TC_ALL])
data = pg_tb[DCB_PG_ATTR_TC_ALL];
else
data = pg_tb[i];
ret = nla_parse_nested(param_tb, DCB_TC_ATTR_PARAM_MAX,
data, dcbnl_tc_param_nest);
if (ret)
goto err_pg;
param_nest = nla_nest_start(dcbnl_skb, i);
if (!param_nest)
goto err_pg;
pgid = DCB_ATTR_VALUE_UNDEFINED;
prio = DCB_ATTR_VALUE_UNDEFINED;
tc_pct = DCB_ATTR_VALUE_UNDEFINED;
up_map = DCB_ATTR_VALUE_UNDEFINED;
if (dir) {
/* Rx */
netdev->dcbnl_ops->getpgtccfgrx(netdev,
i - DCB_PG_ATTR_TC_0, &prio,
&pgid, &tc_pct, &up_map);
} else {
/* Tx */
netdev->dcbnl_ops->getpgtccfgtx(netdev,
i - DCB_PG_ATTR_TC_0, &prio,
&pgid, &tc_pct, &up_map);
}
if (param_tb[DCB_TC_ATTR_PARAM_PGID] ||
param_tb[DCB_TC_ATTR_PARAM_ALL]) {
ret = nla_put_u8(dcbnl_skb,
DCB_TC_ATTR_PARAM_PGID, pgid);
if (ret)
goto err_param;
}
if (param_tb[DCB_TC_ATTR_PARAM_UP_MAPPING] ||
param_tb[DCB_TC_ATTR_PARAM_ALL]) {
ret = nla_put_u8(dcbnl_skb,
DCB_TC_ATTR_PARAM_UP_MAPPING, up_map);
if (ret)
goto err_param;
}
if (param_tb[DCB_TC_ATTR_PARAM_STRICT_PRIO] ||
param_tb[DCB_TC_ATTR_PARAM_ALL]) {
ret = nla_put_u8(dcbnl_skb,
DCB_TC_ATTR_PARAM_STRICT_PRIO, prio);
if (ret)
goto err_param;
}
if (param_tb[DCB_TC_ATTR_PARAM_BW_PCT] ||
param_tb[DCB_TC_ATTR_PARAM_ALL]) {
ret = nla_put_u8(dcbnl_skb, DCB_TC_ATTR_PARAM_BW_PCT,
tc_pct);
if (ret)
goto err_param;
}
nla_nest_end(dcbnl_skb, param_nest);
}
if (pg_tb[DCB_PG_ATTR_BW_ID_ALL])
getall = 1;
else
getall = 0;
for (i = DCB_PG_ATTR_BW_ID_0; i <= DCB_PG_ATTR_BW_ID_7; i++) {
if (!getall && !pg_tb[i])
continue;
tc_pct = DCB_ATTR_VALUE_UNDEFINED;
if (dir) {
/* Rx */
netdev->dcbnl_ops->getpgbwgcfgrx(netdev,
i - DCB_PG_ATTR_BW_ID_0, &tc_pct);
} else {
/* Tx */
netdev->dcbnl_ops->getpgbwgcfgtx(netdev,
i - DCB_PG_ATTR_BW_ID_0, &tc_pct);
}
ret = nla_put_u8(dcbnl_skb, i, tc_pct);
if (ret)
goto err_pg;
}
nla_nest_end(dcbnl_skb, pg_nest);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
goto err_out;
return 0;
err_param:
nla_nest_cancel(dcbnl_skb, param_nest);
err_pg:
nla_nest_cancel(dcbnl_skb, pg_nest);
nlmsg_failure:
err:
kfree_skb(dcbnl_skb);
err_out:
ret = -EINVAL;
return ret;
}
static int dcbnl_pgtx_getcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
return __dcbnl_pg_getcfg(netdev, tb, pid, seq, flags, 0);
}
static int dcbnl_pgrx_getcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
return __dcbnl_pg_getcfg(netdev, tb, pid, seq, flags, 1);
}
static int dcbnl_setstate(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret = -EINVAL;
u8 value;
if (!tb[DCB_ATTR_STATE] || !netdev->dcbnl_ops->setstate)
return ret;
value = nla_get_u8(tb[DCB_ATTR_STATE]);
ret = dcbnl_reply(netdev->dcbnl_ops->setstate(netdev, value),
RTM_SETDCB, DCB_CMD_SSTATE, DCB_ATTR_STATE,
pid, seq, flags);
return ret;
}
static int dcbnl_setpfccfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct nlattr *data[DCB_PFC_UP_ATTR_MAX + 1];
int i;
int ret = -EINVAL;
u8 value;
if (!tb[DCB_ATTR_PFC_CFG] || !netdev->dcbnl_ops->setpfccfg)
return ret;
ret = nla_parse_nested(data, DCB_PFC_UP_ATTR_MAX,
tb[DCB_ATTR_PFC_CFG],
dcbnl_pfc_up_nest);
if (ret)
goto err;
for (i = DCB_PFC_UP_ATTR_0; i <= DCB_PFC_UP_ATTR_7; i++) {
if (data[i] == NULL)
continue;
value = nla_get_u8(data[i]);
netdev->dcbnl_ops->setpfccfg(netdev,
data[i]->nla_type - DCB_PFC_UP_ATTR_0, value);
}
ret = dcbnl_reply(0, RTM_SETDCB, DCB_CMD_PFC_SCFG, DCB_ATTR_PFC_CFG,
pid, seq, flags);
err:
return ret;
}
static int dcbnl_setall(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret = -EINVAL;
if (!tb[DCB_ATTR_SET_ALL] || !netdev->dcbnl_ops->setall)
return ret;
ret = dcbnl_reply(netdev->dcbnl_ops->setall(netdev), RTM_SETDCB,
DCB_CMD_SET_ALL, DCB_ATTR_SET_ALL, pid, seq, flags);
dcbnl_cee_notify(netdev, RTM_SETDCB, DCB_CMD_SET_ALL, seq, 0);
return ret;
}
static int __dcbnl_pg_setcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags, int dir)
{
struct nlattr *pg_tb[DCB_PG_ATTR_MAX + 1];
struct nlattr *param_tb[DCB_TC_ATTR_PARAM_MAX + 1];
int ret = -EINVAL;
int i;
u8 pgid;
u8 up_map;
u8 prio;
u8 tc_pct;
if (!tb[DCB_ATTR_PG_CFG] ||
!netdev->dcbnl_ops->setpgtccfgtx ||
!netdev->dcbnl_ops->setpgtccfgrx ||
!netdev->dcbnl_ops->setpgbwgcfgtx ||
!netdev->dcbnl_ops->setpgbwgcfgrx)
return ret;
ret = nla_parse_nested(pg_tb, DCB_PG_ATTR_MAX,
tb[DCB_ATTR_PG_CFG], dcbnl_pg_nest);
if (ret)
goto err;
for (i = DCB_PG_ATTR_TC_0; i <= DCB_PG_ATTR_TC_7; i++) {
if (!pg_tb[i])
continue;
ret = nla_parse_nested(param_tb, DCB_TC_ATTR_PARAM_MAX,
pg_tb[i], dcbnl_tc_param_nest);
if (ret)
goto err;
pgid = DCB_ATTR_VALUE_UNDEFINED;
prio = DCB_ATTR_VALUE_UNDEFINED;
tc_pct = DCB_ATTR_VALUE_UNDEFINED;
up_map = DCB_ATTR_VALUE_UNDEFINED;
if (param_tb[DCB_TC_ATTR_PARAM_STRICT_PRIO])
prio =
nla_get_u8(param_tb[DCB_TC_ATTR_PARAM_STRICT_PRIO]);
if (param_tb[DCB_TC_ATTR_PARAM_PGID])
pgid = nla_get_u8(param_tb[DCB_TC_ATTR_PARAM_PGID]);
if (param_tb[DCB_TC_ATTR_PARAM_BW_PCT])
tc_pct = nla_get_u8(param_tb[DCB_TC_ATTR_PARAM_BW_PCT]);
if (param_tb[DCB_TC_ATTR_PARAM_UP_MAPPING])
up_map =
nla_get_u8(param_tb[DCB_TC_ATTR_PARAM_UP_MAPPING]);
/* dir: Tx = 0, Rx = 1 */
if (dir) {
/* Rx */
netdev->dcbnl_ops->setpgtccfgrx(netdev,
i - DCB_PG_ATTR_TC_0,
prio, pgid, tc_pct, up_map);
} else {
/* Tx */
netdev->dcbnl_ops->setpgtccfgtx(netdev,
i - DCB_PG_ATTR_TC_0,
prio, pgid, tc_pct, up_map);
}
}
for (i = DCB_PG_ATTR_BW_ID_0; i <= DCB_PG_ATTR_BW_ID_7; i++) {
if (!pg_tb[i])
continue;
tc_pct = nla_get_u8(pg_tb[i]);
/* dir: Tx = 0, Rx = 1 */
if (dir) {
/* Rx */
netdev->dcbnl_ops->setpgbwgcfgrx(netdev,
i - DCB_PG_ATTR_BW_ID_0, tc_pct);
} else {
/* Tx */
netdev->dcbnl_ops->setpgbwgcfgtx(netdev,
i - DCB_PG_ATTR_BW_ID_0, tc_pct);
}
}
ret = dcbnl_reply(0, RTM_SETDCB,
(dir ? DCB_CMD_PGRX_SCFG : DCB_CMD_PGTX_SCFG),
DCB_ATTR_PG_CFG, pid, seq, flags);
err:
return ret;
}
static int dcbnl_pgtx_setcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
return __dcbnl_pg_setcfg(netdev, tb, pid, seq, flags, 0);
}
static int dcbnl_pgrx_setcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
return __dcbnl_pg_setcfg(netdev, tb, pid, seq, flags, 1);
}
static int dcbnl_bcn_getcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *bcn_nest;
struct nlattr *bcn_tb[DCB_BCN_ATTR_MAX + 1];
u8 value_byte;
u32 value_integer;
int ret = -EINVAL;
bool getall = false;
int i;
if (!tb[DCB_ATTR_BCN] || !netdev->dcbnl_ops->getbcnrp ||
!netdev->dcbnl_ops->getbcncfg)
return ret;
ret = nla_parse_nested(bcn_tb, DCB_BCN_ATTR_MAX,
tb[DCB_ATTR_BCN], dcbnl_bcn_nest);
if (ret)
goto err_out;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb)
goto err_out;
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_BCN_GCFG;
bcn_nest = nla_nest_start(dcbnl_skb, DCB_ATTR_BCN);
if (!bcn_nest)
goto err;
if (bcn_tb[DCB_BCN_ATTR_ALL])
getall = true;
for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
if (!getall && !bcn_tb[i])
continue;
netdev->dcbnl_ops->getbcnrp(netdev, i - DCB_BCN_ATTR_RP_0,
&value_byte);
ret = nla_put_u8(dcbnl_skb, i, value_byte);
if (ret)
goto err_bcn;
}
for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
if (!getall && !bcn_tb[i])
continue;
netdev->dcbnl_ops->getbcncfg(netdev, i,
&value_integer);
ret = nla_put_u32(dcbnl_skb, i, value_integer);
if (ret)
goto err_bcn;
}
nla_nest_end(dcbnl_skb, bcn_nest);
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
goto err_out;
return 0;
err_bcn:
nla_nest_cancel(dcbnl_skb, bcn_nest);
nlmsg_failure:
err:
kfree_skb(dcbnl_skb);
err_out:
ret = -EINVAL;
return ret;
}
static int dcbnl_bcn_setcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct nlattr *data[DCB_BCN_ATTR_MAX + 1];
int i;
int ret = -EINVAL;
u8 value_byte;
u32 value_int;
if (!tb[DCB_ATTR_BCN] || !netdev->dcbnl_ops->setbcncfg ||
!netdev->dcbnl_ops->setbcnrp)
return ret;
ret = nla_parse_nested(data, DCB_BCN_ATTR_MAX,
tb[DCB_ATTR_BCN],
dcbnl_pfc_up_nest);
if (ret)
goto err;
for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
if (data[i] == NULL)
continue;
value_byte = nla_get_u8(data[i]);
netdev->dcbnl_ops->setbcnrp(netdev,
data[i]->nla_type - DCB_BCN_ATTR_RP_0, value_byte);
}
for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
if (data[i] == NULL)
continue;
value_int = nla_get_u32(data[i]);
netdev->dcbnl_ops->setbcncfg(netdev,
i, value_int);
}
ret = dcbnl_reply(0, RTM_SETDCB, DCB_CMD_BCN_SCFG, DCB_ATTR_BCN,
pid, seq, flags);
err:
return ret;
}
static int dcbnl_build_peer_app(struct net_device *netdev, struct sk_buff* skb,
int app_nested_type, int app_info_type,
int app_entry_type)
{
struct dcb_peer_app_info info;
struct dcb_app *table = NULL;
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
u16 app_count;
int err;
/**
* retrieve the peer app configuration form the driver. If the driver
* handlers fail exit without doing anything
*/
err = ops->peer_getappinfo(netdev, &info, &app_count);
if (!err && app_count) {
table = kmalloc(sizeof(struct dcb_app) * app_count, GFP_KERNEL);
if (!table)
return -ENOMEM;
err = ops->peer_getapptable(netdev, table);
}
if (!err) {
u16 i;
struct nlattr *app;
/**
* build the message, from here on the only possible failure
* is due to the skb size
*/
err = -EMSGSIZE;
app = nla_nest_start(skb, app_nested_type);
if (!app)
goto nla_put_failure;
if (app_info_type &&
nla_put(skb, app_info_type, sizeof(info), &info))
goto nla_put_failure;
for (i = 0; i < app_count; i++) {
if (nla_put(skb, app_entry_type, sizeof(struct dcb_app),
&table[i]))
goto nla_put_failure;
}
nla_nest_end(skb, app);
}
err = 0;
nla_put_failure:
kfree(table);
return err;
}
/* Handle IEEE 802.1Qaz GET commands. */
static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
{
struct nlattr *ieee, *app;
struct dcb_app_type *itr;
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
int dcbx;
int err = -EMSGSIZE;
if (nla_put_string(skb, DCB_ATTR_IFNAME, netdev->name))
goto nla_put_failure;
ieee = nla_nest_start(skb, DCB_ATTR_IEEE);
if (!ieee)
goto nla_put_failure;
if (ops->ieee_getets) {
struct ieee_ets ets;
err = ops->ieee_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_ETS, sizeof(ets), &ets))
goto nla_put_failure;
}
if (ops->ieee_getmaxrate) {
struct ieee_maxrate maxrate;
err = ops->ieee_getmaxrate(netdev, &maxrate);
if (!err) {
err = nla_put(skb, DCB_ATTR_IEEE_MAXRATE,
sizeof(maxrate), &maxrate);
if (err)
goto nla_put_failure;
}
}
if (ops->ieee_getpfc) {
struct ieee_pfc pfc;
err = ops->ieee_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PFC, sizeof(pfc), &pfc))
goto nla_put_failure;
}
app = nla_nest_start(skb, DCB_ATTR_IEEE_APP_TABLE);
if (!app)
goto nla_put_failure;
spin_lock(&dcb_lock);
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->ifindex == netdev->ifindex) {
err = nla_put(skb, DCB_ATTR_IEEE_APP, sizeof(itr->app),
&itr->app);
if (err) {
spin_unlock(&dcb_lock);
goto nla_put_failure;
}
}
}
if (netdev->dcbnl_ops->getdcbx)
dcbx = netdev->dcbnl_ops->getdcbx(netdev);
else
dcbx = -EOPNOTSUPP;
spin_unlock(&dcb_lock);
nla_nest_end(skb, app);
/* get peer info if available */
if (ops->ieee_peer_getets) {
struct ieee_ets ets;
err = ops->ieee_peer_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_ETS, sizeof(ets), &ets))
goto nla_put_failure;
}
if (ops->ieee_peer_getpfc) {
struct ieee_pfc pfc;
err = ops->ieee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_PFC, sizeof(pfc), &pfc))
goto nla_put_failure;
}
if (ops->peer_getappinfo && ops->peer_getapptable) {
err = dcbnl_build_peer_app(netdev, skb,
DCB_ATTR_IEEE_PEER_APP,
DCB_ATTR_IEEE_APP_UNSPEC,
DCB_ATTR_IEEE_APP);
if (err)
goto nla_put_failure;
}
nla_nest_end(skb, ieee);
if (dcbx >= 0) {
err = nla_put_u8(skb, DCB_ATTR_DCBX, dcbx);
if (err)
goto nla_put_failure;
}
return 0;
nla_put_failure:
return err;
}
static int dcbnl_cee_pg_fill(struct sk_buff *skb, struct net_device *dev,
int dir)
{
u8 pgid, up_map, prio, tc_pct;
const struct dcbnl_rtnl_ops *ops = dev->dcbnl_ops;
int i = dir ? DCB_ATTR_CEE_TX_PG : DCB_ATTR_CEE_RX_PG;
struct nlattr *pg = nla_nest_start(skb, i);
if (!pg)
goto nla_put_failure;
for (i = DCB_PG_ATTR_TC_0; i <= DCB_PG_ATTR_TC_7; i++) {
struct nlattr *tc_nest = nla_nest_start(skb, i);
if (!tc_nest)
goto nla_put_failure;
pgid = DCB_ATTR_VALUE_UNDEFINED;
prio = DCB_ATTR_VALUE_UNDEFINED;
tc_pct = DCB_ATTR_VALUE_UNDEFINED;
up_map = DCB_ATTR_VALUE_UNDEFINED;
if (!dir)
ops->getpgtccfgrx(dev, i - DCB_PG_ATTR_TC_0,
&prio, &pgid, &tc_pct, &up_map);
else
ops->getpgtccfgtx(dev, i - DCB_PG_ATTR_TC_0,
&prio, &pgid, &tc_pct, &up_map);
if (nla_put_u8(skb, DCB_TC_ATTR_PARAM_PGID, pgid) ||
nla_put_u8(skb, DCB_TC_ATTR_PARAM_UP_MAPPING, up_map) ||
nla_put_u8(skb, DCB_TC_ATTR_PARAM_STRICT_PRIO, prio) ||
nla_put_u8(skb, DCB_TC_ATTR_PARAM_BW_PCT, tc_pct))
goto nla_put_failure;
nla_nest_end(skb, tc_nest);
}
for (i = DCB_PG_ATTR_BW_ID_0; i <= DCB_PG_ATTR_BW_ID_7; i++) {
tc_pct = DCB_ATTR_VALUE_UNDEFINED;
if (!dir)
ops->getpgbwgcfgrx(dev, i - DCB_PG_ATTR_BW_ID_0,
&tc_pct);
else
ops->getpgbwgcfgtx(dev, i - DCB_PG_ATTR_BW_ID_0,
&tc_pct);
if (nla_put_u8(skb, i, tc_pct))
goto nla_put_failure;
}
nla_nest_end(skb, pg);
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int dcbnl_cee_fill(struct sk_buff *skb, struct net_device *netdev)
{
struct nlattr *cee, *app;
struct dcb_app_type *itr;
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
int dcbx, i, err = -EMSGSIZE;
u8 value;
if (nla_put_string(skb, DCB_ATTR_IFNAME, netdev->name))
goto nla_put_failure;
cee = nla_nest_start(skb, DCB_ATTR_CEE);
if (!cee)
goto nla_put_failure;
/* local pg */
if (ops->getpgtccfgtx && ops->getpgbwgcfgtx) {
err = dcbnl_cee_pg_fill(skb, netdev, 1);
if (err)
goto nla_put_failure;
}
if (ops->getpgtccfgrx && ops->getpgbwgcfgrx) {
err = dcbnl_cee_pg_fill(skb, netdev, 0);
if (err)
goto nla_put_failure;
}
/* local pfc */
if (ops->getpfccfg) {
struct nlattr *pfc_nest = nla_nest_start(skb, DCB_ATTR_CEE_PFC);
if (!pfc_nest)
goto nla_put_failure;
for (i = DCB_PFC_UP_ATTR_0; i <= DCB_PFC_UP_ATTR_7; i++) {
ops->getpfccfg(netdev, i - DCB_PFC_UP_ATTR_0, &value);
if (nla_put_u8(skb, i, value))
goto nla_put_failure;
}
nla_nest_end(skb, pfc_nest);
}
/* local app */
spin_lock(&dcb_lock);
app = nla_nest_start(skb, DCB_ATTR_CEE_APP_TABLE);
if (!app)
goto dcb_unlock;
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->ifindex == netdev->ifindex) {
struct nlattr *app_nest = nla_nest_start(skb,
DCB_ATTR_APP);
if (!app_nest)
goto dcb_unlock;
err = nla_put_u8(skb, DCB_APP_ATTR_IDTYPE,
itr->app.selector);
if (err)
goto dcb_unlock;
err = nla_put_u16(skb, DCB_APP_ATTR_ID,
itr->app.protocol);
if (err)
goto dcb_unlock;
err = nla_put_u8(skb, DCB_APP_ATTR_PRIORITY,
itr->app.priority);
if (err)
goto dcb_unlock;
nla_nest_end(skb, app_nest);
}
}
nla_nest_end(skb, app);
if (netdev->dcbnl_ops->getdcbx)
dcbx = netdev->dcbnl_ops->getdcbx(netdev);
else
dcbx = -EOPNOTSUPP;
spin_unlock(&dcb_lock);
/* features flags */
if (ops->getfeatcfg) {
struct nlattr *feat = nla_nest_start(skb, DCB_ATTR_CEE_FEAT);
if (!feat)
goto nla_put_failure;
for (i = DCB_FEATCFG_ATTR_ALL + 1; i <= DCB_FEATCFG_ATTR_MAX;
i++)
if (!ops->getfeatcfg(netdev, i, &value) &&
nla_put_u8(skb, i, value))
goto nla_put_failure;
nla_nest_end(skb, feat);
}
/* peer info if available */
if (ops->cee_peer_getpg) {
struct cee_pg pg;
err = ops->cee_peer_getpg(netdev, &pg);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PG, sizeof(pg), &pg))
goto nla_put_failure;
}
if (ops->cee_peer_getpfc) {
struct cee_pfc pfc;
err = ops->cee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PFC, sizeof(pfc), &pfc))
goto nla_put_failure;
}
if (ops->peer_getappinfo && ops->peer_getapptable) {
err = dcbnl_build_peer_app(netdev, skb,
DCB_ATTR_CEE_PEER_APP_TABLE,
DCB_ATTR_CEE_PEER_APP_INFO,
DCB_ATTR_CEE_PEER_APP);
if (err)
goto nla_put_failure;
}
nla_nest_end(skb, cee);
/* DCBX state */
if (dcbx >= 0) {
err = nla_put_u8(skb, DCB_ATTR_DCBX, dcbx);
if (err)
goto nla_put_failure;
}
return 0;
dcb_unlock:
spin_unlock(&dcb_lock);
nla_put_failure:
return err;
}
static int dcbnl_notify(struct net_device *dev, int event, int cmd,
u32 seq, u32 pid, int dcbx_ver)
{
struct net *net = dev_net(dev);
struct sk_buff *skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
const struct dcbnl_rtnl_ops *ops = dev->dcbnl_ops;
int err;
if (!ops)
return -EOPNOTSUPP;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
return -ENOBUFS;
nlh = nlmsg_put(skb, pid, 0, event, sizeof(*dcb), 0);
if (nlh == NULL) {
nlmsg_free(skb);
return -EMSGSIZE;
}
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = cmd;
if (dcbx_ver == DCB_CAP_DCBX_VER_IEEE)
err = dcbnl_ieee_fill(skb, dev);
else
err = dcbnl_cee_fill(skb, dev);
if (err < 0) {
/* Report error to broadcast listeners */
nlmsg_cancel(skb, nlh);
kfree_skb(skb);
rtnl_set_sk_err(net, RTNLGRP_DCB, err);
} else {
/* End nlmsg and notify broadcast listeners */
nlmsg_end(skb, nlh);
rtnl_notify(skb, net, 0, RTNLGRP_DCB, NULL, GFP_KERNEL);
}
return err;
}
int dcbnl_ieee_notify(struct net_device *dev, int event, int cmd,
u32 seq, u32 pid)
{
return dcbnl_notify(dev, event, cmd, seq, pid, DCB_CAP_DCBX_VER_IEEE);
}
EXPORT_SYMBOL(dcbnl_ieee_notify);
int dcbnl_cee_notify(struct net_device *dev, int event, int cmd,
u32 seq, u32 pid)
{
return dcbnl_notify(dev, event, cmd, seq, pid, DCB_CAP_DCBX_VER_CEE);
}
EXPORT_SYMBOL(dcbnl_cee_notify);
/* Handle IEEE 802.1Qaz SET commands. If any requested operation can not
* be completed the entire msg is aborted and error value is returned.
* No attempt is made to reconcile the case where only part of the
* cmd can be completed.
*/
static int dcbnl_ieee_set(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
struct nlattr *ieee[DCB_ATTR_IEEE_MAX + 1];
int err = -EOPNOTSUPP;
if (!ops)
return err;
if (!tb[DCB_ATTR_IEEE])
return -EINVAL;
err = nla_parse_nested(ieee, DCB_ATTR_IEEE_MAX,
tb[DCB_ATTR_IEEE], dcbnl_ieee_policy);
if (err)
return err;
if (ieee[DCB_ATTR_IEEE_ETS] && ops->ieee_setets) {
struct ieee_ets *ets = nla_data(ieee[DCB_ATTR_IEEE_ETS]);
err = ops->ieee_setets(netdev, ets);
if (err)
goto err;
}
if (ieee[DCB_ATTR_IEEE_MAXRATE] && ops->ieee_setmaxrate) {
struct ieee_maxrate *maxrate =
nla_data(ieee[DCB_ATTR_IEEE_MAXRATE]);
err = ops->ieee_setmaxrate(netdev, maxrate);
if (err)
goto err;
}
if (ieee[DCB_ATTR_IEEE_PFC] && ops->ieee_setpfc) {
struct ieee_pfc *pfc = nla_data(ieee[DCB_ATTR_IEEE_PFC]);
err = ops->ieee_setpfc(netdev, pfc);
if (err)
goto err;
}
if (ieee[DCB_ATTR_IEEE_APP_TABLE]) {
struct nlattr *attr;
int rem;
nla_for_each_nested(attr, ieee[DCB_ATTR_IEEE_APP_TABLE], rem) {
struct dcb_app *app_data;
if (nla_type(attr) != DCB_ATTR_IEEE_APP)
continue;
app_data = nla_data(attr);
if (ops->ieee_setapp)
err = ops->ieee_setapp(netdev, app_data);
else
err = dcb_ieee_setapp(netdev, app_data);
if (err)
goto err;
}
}
err:
dcbnl_reply(err, RTM_SETDCB, DCB_CMD_IEEE_SET, DCB_ATTR_IEEE,
pid, seq, flags);
dcbnl_ieee_notify(netdev, RTM_SETDCB, DCB_CMD_IEEE_SET, seq, 0);
return err;
}
static int dcbnl_ieee_get(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct net *net = dev_net(netdev);
struct sk_buff *skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
int err;
if (!ops)
return -EOPNOTSUPP;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
return -ENOBUFS;
nlh = nlmsg_put(skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
if (nlh == NULL) {
nlmsg_free(skb);
return -EMSGSIZE;
}
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_IEEE_GET;
err = dcbnl_ieee_fill(skb, netdev);
if (err < 0) {
nlmsg_cancel(skb, nlh);
kfree_skb(skb);
} else {
nlmsg_end(skb, nlh);
err = rtnl_unicast(skb, net, pid);
}
return err;
}
static int dcbnl_ieee_del(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
struct nlattr *ieee[DCB_ATTR_IEEE_MAX + 1];
int err = -EOPNOTSUPP;
if (!ops)
return -EOPNOTSUPP;
if (!tb[DCB_ATTR_IEEE])
return -EINVAL;
err = nla_parse_nested(ieee, DCB_ATTR_IEEE_MAX,
tb[DCB_ATTR_IEEE], dcbnl_ieee_policy);
if (err)
return err;
if (ieee[DCB_ATTR_IEEE_APP_TABLE]) {
struct nlattr *attr;
int rem;
nla_for_each_nested(attr, ieee[DCB_ATTR_IEEE_APP_TABLE], rem) {
struct dcb_app *app_data;
if (nla_type(attr) != DCB_ATTR_IEEE_APP)
continue;
app_data = nla_data(attr);
if (ops->ieee_delapp)
err = ops->ieee_delapp(netdev, app_data);
else
err = dcb_ieee_delapp(netdev, app_data);
if (err)
goto err;
}
}
err:
dcbnl_reply(err, RTM_SETDCB, DCB_CMD_IEEE_DEL, DCB_ATTR_IEEE,
pid, seq, flags);
dcbnl_ieee_notify(netdev, RTM_SETDCB, DCB_CMD_IEEE_DEL, seq, 0);
return err;
}
/* DCBX configuration */
static int dcbnl_getdcbx(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret;
if (!netdev->dcbnl_ops->getdcbx)
return -EOPNOTSUPP;
ret = dcbnl_reply(netdev->dcbnl_ops->getdcbx(netdev), RTM_GETDCB,
DCB_CMD_GDCBX, DCB_ATTR_DCBX, pid, seq, flags);
return ret;
}
static int dcbnl_setdcbx(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
int ret;
u8 value;
if (!netdev->dcbnl_ops->setdcbx)
return -EOPNOTSUPP;
if (!tb[DCB_ATTR_DCBX])
return -EINVAL;
value = nla_get_u8(tb[DCB_ATTR_DCBX]);
ret = dcbnl_reply(netdev->dcbnl_ops->setdcbx(netdev, value),
RTM_SETDCB, DCB_CMD_SDCBX, DCB_ATTR_DCBX,
pid, seq, flags);
return ret;
}
static int dcbnl_getfeatcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct sk_buff *dcbnl_skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
struct nlattr *data[DCB_FEATCFG_ATTR_MAX + 1], *nest;
u8 value;
int ret, i;
int getall = 0;
if (!netdev->dcbnl_ops->getfeatcfg)
return -EOPNOTSUPP;
if (!tb[DCB_ATTR_FEATCFG])
return -EINVAL;
ret = nla_parse_nested(data, DCB_FEATCFG_ATTR_MAX, tb[DCB_ATTR_FEATCFG],
dcbnl_featcfg_nest);
if (ret)
goto err_out;
dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!dcbnl_skb) {
ret = -ENOBUFS;
goto err_out;
}
nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_GFEATCFG;
nest = nla_nest_start(dcbnl_skb, DCB_ATTR_FEATCFG);
if (!nest) {
ret = -EMSGSIZE;
goto nla_put_failure;
}
if (data[DCB_FEATCFG_ATTR_ALL])
getall = 1;
for (i = DCB_FEATCFG_ATTR_ALL+1; i <= DCB_FEATCFG_ATTR_MAX; i++) {
if (!getall && !data[i])
continue;
ret = netdev->dcbnl_ops->getfeatcfg(netdev, i, &value);
if (!ret)
ret = nla_put_u8(dcbnl_skb, i, value);
if (ret) {
nla_nest_cancel(dcbnl_skb, nest);
goto nla_put_failure;
}
}
nla_nest_end(dcbnl_skb, nest);
nlmsg_end(dcbnl_skb, nlh);
return rtnl_unicast(dcbnl_skb, &init_net, pid);
nla_put_failure:
nlmsg_cancel(dcbnl_skb, nlh);
nlmsg_failure:
kfree_skb(dcbnl_skb);
err_out:
return ret;
}
static int dcbnl_setfeatcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct nlattr *data[DCB_FEATCFG_ATTR_MAX + 1];
int ret, i;
u8 value;
if (!netdev->dcbnl_ops->setfeatcfg)
return -ENOTSUPP;
if (!tb[DCB_ATTR_FEATCFG])
return -EINVAL;
ret = nla_parse_nested(data, DCB_FEATCFG_ATTR_MAX, tb[DCB_ATTR_FEATCFG],
dcbnl_featcfg_nest);
if (ret)
goto err;
for (i = DCB_FEATCFG_ATTR_ALL+1; i <= DCB_FEATCFG_ATTR_MAX; i++) {
if (data[i] == NULL)
continue;
value = nla_get_u8(data[i]);
ret = netdev->dcbnl_ops->setfeatcfg(netdev, i, value);
if (ret)
goto err;
}
err:
dcbnl_reply(ret, RTM_SETDCB, DCB_CMD_SFEATCFG, DCB_ATTR_FEATCFG,
pid, seq, flags);
return ret;
}
/* Handle CEE DCBX GET commands. */
static int dcbnl_cee_get(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags)
{
struct net *net = dev_net(netdev);
struct sk_buff *skb;
struct nlmsghdr *nlh;
struct dcbmsg *dcb;
const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
int err;
if (!ops)
return -EOPNOTSUPP;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
return -ENOBUFS;
nlh = nlmsg_put(skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
if (nlh == NULL) {
nlmsg_free(skb);
return -EMSGSIZE;
}
dcb = NLMSG_DATA(nlh);
dcb->dcb_family = AF_UNSPEC;
dcb->cmd = DCB_CMD_CEE_GET;
err = dcbnl_cee_fill(skb, netdev);
if (err < 0) {
nlmsg_cancel(skb, nlh);
nlmsg_free(skb);
} else {
nlmsg_end(skb, nlh);
err = rtnl_unicast(skb, net, pid);
}
return err;
}
struct reply_func {
/* reply netlink message type */
int type;
/* function to fill message contents */
int (*cb)(struct net_device *, struct nlmsghdr *, u32,
struct nlattr **, struct sk_buff *);
};
static const struct reply_func reply_funcs[DCB_CMD_MAX+1] = {
/* FIXME: add reply defs */
};
static int dcb_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
{
struct net *net = sock_net(skb->sk);
struct net_device *netdev;
struct dcbmsg *dcb = (struct dcbmsg *)NLMSG_DATA(nlh);
struct nlattr *tb[DCB_ATTR_MAX + 1];
u32 pid = skb ? NETLINK_CB(skb).pid : 0;
int ret = -EINVAL;
struct sk_buff *reply_skb;
struct nlmsghdr *reply_nlh;
const struct reply_func *fn;
if (!net_eq(net, &init_net))
return -EINVAL;
ret = nlmsg_parse(nlh, sizeof(*dcb), tb, DCB_ATTR_MAX,
dcbnl_rtnl_policy);
if (ret < 0)
return ret;
if (dcb->cmd > DCB_CMD_MAX)
return -EINVAL;
/* check if a reply function has been defined for the command */
fn = &reply_funcs[dcb->cmd];
if (!fn->cb)
return -EOPNOTSUPP;
if (!tb[DCB_ATTR_IFNAME])
return -EINVAL;
netdev = dev_get_by_name(&init_net, nla_data(tb[DCB_ATTR_IFNAME]));
if (!netdev)
return -EINVAL;
if (!netdev->dcbnl_ops)
goto errout;
reply_skb = dcbnl_newmsg(fn->type, dcb->cmd, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags, &reply_nlh);
if (!reply_skb) {
ret = -ENOBUFS;
goto out;
}
ret = fn->cb(netdev, nlh, nlh->nlmsg_seq, tb, reply_skb);
if (ret < 0) {
nlmsg_free(reply_skb);
goto out;
}
nlmsg_end(reply_skb, reply_nlh);
ret = rtnl_unicast(reply_skb, &init_net, pid);
if (ret)
goto out;
switch (dcb->cmd) {
case DCB_CMD_GSTATE:
ret = dcbnl_getstate(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PFC_GCFG:
ret = dcbnl_getpfccfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_GPERM_HWADDR:
ret = dcbnl_getperm_hwaddr(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PGTX_GCFG:
ret = dcbnl_pgtx_getcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PGRX_GCFG:
ret = dcbnl_pgrx_getcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_BCN_GCFG:
ret = dcbnl_bcn_getcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_SSTATE:
ret = dcbnl_setstate(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PFC_SCFG:
ret = dcbnl_setpfccfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_SET_ALL:
ret = dcbnl_setall(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PGTX_SCFG:
ret = dcbnl_pgtx_setcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PGRX_SCFG:
ret = dcbnl_pgrx_setcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_GCAP:
ret = dcbnl_getcap(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_GNUMTCS:
ret = dcbnl_getnumtcs(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_SNUMTCS:
ret = dcbnl_setnumtcs(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PFC_GSTATE:
ret = dcbnl_getpfcstate(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_PFC_SSTATE:
ret = dcbnl_setpfcstate(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_BCN_SCFG:
ret = dcbnl_bcn_setcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_GAPP:
ret = dcbnl_getapp(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_SAPP:
ret = dcbnl_setapp(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_IEEE_SET:
ret = dcbnl_ieee_set(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_IEEE_GET:
ret = dcbnl_ieee_get(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_IEEE_DEL:
ret = dcbnl_ieee_del(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_GDCBX:
ret = dcbnl_getdcbx(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_SDCBX:
ret = dcbnl_setdcbx(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_GFEATCFG:
ret = dcbnl_getfeatcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_SFEATCFG:
ret = dcbnl_setfeatcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
case DCB_CMD_CEE_GET:
ret = dcbnl_cee_get(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
default:
goto errout;
}
errout:
ret = -EINVAL;
out:
dev_put(netdev);
return ret;
}
/**
* dcb_getapp - retrieve the DCBX application user priority
*
* On success returns a non-zero 802.1p user priority bitmap
* otherwise returns 0 as the invalid user priority bitmap to
* indicate an error.
*/
u8 dcb_getapp(struct net_device *dev, struct dcb_app *app)
{
struct dcb_app_type *itr;
u8 prio = 0;
spin_lock(&dcb_lock);
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->app.selector == app->selector &&
itr->app.protocol == app->protocol &&
itr->ifindex == dev->ifindex) {
prio = itr->app.priority;
break;
}
}
spin_unlock(&dcb_lock);
return prio;
}
EXPORT_SYMBOL(dcb_getapp);
/**
* dcb_setapp - add CEE dcb application data to app list
*
* Priority 0 is an invalid priority in CEE spec. This routine
* removes applications from the app list if the priority is
* set to zero.
*/
int dcb_setapp(struct net_device *dev, struct dcb_app *new)
{
struct dcb_app_type *itr;
struct dcb_app_type event;
event.ifindex = dev->ifindex;
memcpy(&event.app, new, sizeof(event.app));
if (dev->dcbnl_ops->getdcbx)
event.dcbx = dev->dcbnl_ops->getdcbx(dev);
spin_lock(&dcb_lock);
/* Search for existing match and replace */
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->app.selector == new->selector &&
itr->app.protocol == new->protocol &&
itr->ifindex == dev->ifindex) {
if (new->priority)
itr->app.priority = new->priority;
else {
list_del(&itr->list);
kfree(itr);
}
goto out;
}
}
/* App type does not exist add new application type */
if (new->priority) {
struct dcb_app_type *entry;
entry = kmalloc(sizeof(struct dcb_app_type), GFP_ATOMIC);
if (!entry) {
spin_unlock(&dcb_lock);
return -ENOMEM;
}
memcpy(&entry->app, new, sizeof(*new));
entry->ifindex = dev->ifindex;
list_add(&entry->list, &dcb_app_list);
}
out:
spin_unlock(&dcb_lock);
call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return 0;
}
EXPORT_SYMBOL(dcb_setapp);
/**
* dcb_ieee_getapp_mask - retrieve the IEEE DCB application priority
*
* Helper routine which on success returns a non-zero 802.1Qaz user
* priority bitmap otherwise returns 0 to indicate the dcb_app was
* not found in APP list.
*/
u8 dcb_ieee_getapp_mask(struct net_device *dev, struct dcb_app *app)
{
struct dcb_app_type *itr;
u8 prio = 0;
spin_lock(&dcb_lock);
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->app.selector == app->selector &&
itr->app.protocol == app->protocol &&
itr->ifindex == dev->ifindex) {
prio |= 1 << itr->app.priority;
}
}
spin_unlock(&dcb_lock);
return prio;
}
EXPORT_SYMBOL(dcb_ieee_getapp_mask);
/**
* dcb_ieee_setapp - add IEEE dcb application data to app list
*
* This adds Application data to the list. Multiple application
* entries may exists for the same selector and protocol as long
* as the priorities are different.
*/
int dcb_ieee_setapp(struct net_device *dev, struct dcb_app *new)
{
struct dcb_app_type *itr, *entry;
struct dcb_app_type event;
int err = 0;
event.ifindex = dev->ifindex;
memcpy(&event.app, new, sizeof(event.app));
if (dev->dcbnl_ops->getdcbx)
event.dcbx = dev->dcbnl_ops->getdcbx(dev);
spin_lock(&dcb_lock);
/* Search for existing match and abort if found */
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->app.selector == new->selector &&
itr->app.protocol == new->protocol &&
itr->app.priority == new->priority &&
itr->ifindex == dev->ifindex) {
err = -EEXIST;
goto out;
}
}
/* App entry does not exist add new entry */
entry = kmalloc(sizeof(struct dcb_app_type), GFP_ATOMIC);
if (!entry) {
err = -ENOMEM;
goto out;
}
memcpy(&entry->app, new, sizeof(*new));
entry->ifindex = dev->ifindex;
list_add(&entry->list, &dcb_app_list);
out:
spin_unlock(&dcb_lock);
if (!err)
call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return err;
}
EXPORT_SYMBOL(dcb_ieee_setapp);
/**
* dcb_ieee_delapp - delete IEEE dcb application data from list
*
* This removes a matching APP data from the APP list
*/
int dcb_ieee_delapp(struct net_device *dev, struct dcb_app *del)
{
struct dcb_app_type *itr;
struct dcb_app_type event;
int err = -ENOENT;
event.ifindex = dev->ifindex;
memcpy(&event.app, del, sizeof(event.app));
if (dev->dcbnl_ops->getdcbx)
event.dcbx = dev->dcbnl_ops->getdcbx(dev);
spin_lock(&dcb_lock);
/* Search for existing match and remove it. */
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->app.selector == del->selector &&
itr->app.protocol == del->protocol &&
itr->app.priority == del->priority &&
itr->ifindex == dev->ifindex) {
list_del(&itr->list);
kfree(itr);
err = 0;
goto out;
}
}
out:
spin_unlock(&dcb_lock);
if (!err)
call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return err;
}
EXPORT_SYMBOL(dcb_ieee_delapp);
static void dcb_flushapp(void)
{
struct dcb_app_type *app;
struct dcb_app_type *tmp;
spin_lock(&dcb_lock);
list_for_each_entry_safe(app, tmp, &dcb_app_list, list) {
list_del(&app->list);
kfree(app);
}
spin_unlock(&dcb_lock);
}
static int __init dcbnl_init(void)
{
INIT_LIST_HEAD(&dcb_app_list);
rtnl_register(PF_UNSPEC, RTM_GETDCB, dcb_doit, NULL, NULL);
rtnl_register(PF_UNSPEC, RTM_SETDCB, dcb_doit, NULL, NULL);
return 0;
}
module_init(dcbnl_init);
static void __exit dcbnl_exit(void)
{
rtnl_unregister(PF_UNSPEC, RTM_GETDCB);
rtnl_unregister(PF_UNSPEC, RTM_SETDCB);
dcb_flushapp();
}
module_exit(dcbnl_exit);
[-- Attachment #4: .config --]
[-- Type: text/plain, Size: 50352 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.5.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#
CONFIG_TINY_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_INJECT=m
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Memory power savings
#
#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
#
# PC-card bridges
#
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_NETFILTER_XTABLES=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
# CONFIG_BRIDGE_EBT_T_NAT is not set
CONFIG_BRIDGE_EBT_802_3=m
# CONFIG_BRIDGE_EBT_AMONG is not set
CONFIG_BRIDGE_EBT_ARP=m
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_LIMIT is not set
CONFIG_BRIDGE_EBT_MARK=m
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
# CONFIG_BRIDGE_EBT_DNAT is not set
# CONFIG_BRIDGE_EBT_MARK_T is not set
CONFIG_BRIDGE_EBT_REDIRECT=m
# CONFIG_BRIDGE_EBT_SNAT is not set
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_ATM=m
# CONFIG_ATM_LANE is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_PHONET=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
# CONFIG_CAN_CALC_BITTIMING is not set
CONFIG_CAN_SJA1000=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCMCIA=m
# CONFIG_CAN_PEAK_PCMCIA is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
# CONFIG_CAN_CC770 is not set
#
# CAN USB interfaces
#
# CONFIG_CAN_EMS_USB is not set
CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_SOFTING is not set
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_RFKILL_REGULATOR=m
CONFIG_NET_9P=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_TARGET_CORE is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_DUMMY is not set
CONFIG_EQUALIZER=m
CONFIG_MII=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
#
# CAIF transport drivers
#
# CONFIG_ETHERNET is not set
# CONFIG_PHYLIB is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_FILTER is not set
CONFIG_PPPOATM=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_SLIP=m
CONFIG_SLHC=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
CONFIG_ATMEL=m
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_AIRO_CS is not set
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_CS is not set
# CONFIG_WL_TI is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_HDLC=m
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=m
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_TCA6416=m
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_BU21013=m
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF50633_PMU is not set
CONFIG_INPUT_ADXL34X=m
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS1WM=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_BQ27X00_I2C is not set
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SCH56XX_COMMON=m
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_SC520_WDT=m
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=m
# CONFIG_W83627HF_WDT is not set
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=m
# CONFIG_MFD_LM3533 is not set
CONFIG_TPS6105X=m
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_TPS6105X=m
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_CHIPIDEA is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=m
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_PCF50633 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set
#
# DMA Devices
#
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
CONFIG_ECHO=m
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
CONFIG_RTS5139=m
CONFIG_RTS5139_DEBUG=y
CONFIG_TRANZPORT=m
CONFIG_USB_SERIAL_QUATECH2=m
# CONFIG_VT6656 is not set
#
# IIO staging drivers
#
# CONFIG_IIO_ST_HWMON is not set
CONFIG_IIO_SW_RING=m
#
# Accelerometers
#
#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD799X is not set
CONFIG_ADT7410=m
# CONFIG_MAX1363 is not set
#
# Analog digital bi-direction converters
#
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
# CONFIG_AD7152 is not set
CONFIG_AD7746=m
#
# Digital to analog converters
#
# CONFIG_AD5380 is not set
#
# Direct Digital Synthesis
#
#
# Digital gyroscope sensors
#
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
#
# Inertial measurement units
#
#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_SENSORS_TSL2563=m
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set
#
# Magnetometer sensors
#
CONFIG_SENSORS_HMC5843=m
#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set
#
# Resolver to digital converters
#
#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=m
# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
CONFIG_ZCACHE=y
CONFIG_ZSMALLOC=y
CONFIG_WLAGS49_H2=m
CONFIG_WLAGS49_H25=m
CONFIG_USB_ENESTORAGE=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
# CONFIG_FT1000_PCMCIA is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_PHONE=m
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_WIMAX_GDM72XX is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_KFIFO_BUF is not set
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Analog to digital converters
#
#
# Amplifiers
#
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_LKDTM=m
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not set
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
^ permalink raw reply related
* Re: ERROR: "pid_nr_ns" [net/ipv6/ipv6.ko] undefined!
From: Eric W. Biederman @ 2012-06-14 1:37 UTC (permalink / raw)
To: wfg; +Cc: netdev
In-Reply-To: <4fd93e30.bP5TsLEpQL9BFy2E%wfg@linux.intel.com>
wfg@linux.intel.com writes:
> FYI, kernel build failed on
Thanks. It looks like we are missing an export in kernel/pid.c
Eric
> tree: git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git user-namespace-v41
> head: c4d23eefc4fdc44ac1b427f3b7c251281a90b6ee
> commit: beb0cb4bdd4e1ab4d7522387cd7bc8edc4209c06 [9/97] net ip6 flowlabel: Make owner a union of struct pid * and kuid_t
> config: i386-allmodconfig (attached as .config)
>
> All related error/warning messages are:
>
> ERROR: "pid_nr_ns" [net/ipv6/ipv6.ko] undefined!
>
> ---
> 0-DAY kernel build testing backend Open Source Technology Centre
> Fengguang Wu <wfg@linux.intel.com> Intel Corporation
>
> From beb0cb4bdd4e1ab4d7522387cd7bc8edc4209c06 Mon Sep 17 00:00:00 2001
> From: "Eric W. Biederman" <ebiederm@xmission.com>
> Date: Thu, 24 May 2012 10:37:59 -0600
> Subject: [PATCH] net ip6 flowlabel: Make owner a union of struct pid * and
> kuid_t
>
> Correct a long standing omission and use struct pid in the owner
> field of struct ip6_flowlabel when the share type is IPV6_FL_S_PROCESS.
> This guarantees we don't have issues when pid wraparound occurs.
>
> Use a kuid_t in the owner field of struct ip6_flowlabel when the
> share type is IPV6_FL_S_USER to add user namespace support.
>
> In /proc/net/ip6_flowlabel capture the current pid namespace when
> opening the file and release the pid namespace when the file is
> closed ensuring we print the pid owner value that is meaning to
> the reader of the file. Similarly use from_kuid_munged to print
> uid values that are meaningful to the reader of the file.
>
> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
> ---
> include/net/ipv6.h | 5 ++++-
> init/Kconfig | 1 -
> net/ipv6/ip6_flowlabel.c | 50 +++++++++++++++++++++++++++++++++++++++-------
> 3 files changed, 47 insertions(+), 9 deletions(-)
>
> diff --git a/include/net/ipv6.h b/include/net/ipv6.h
> index aecf884..77df5e6 100644
> --- a/include/net/ipv6.h
> +++ b/include/net/ipv6.h
> @@ -216,19 +216,22 @@ struct ipv6_txoptions {
>
> struct ip6_flowlabel {
> struct ip6_flowlabel *next;
> __be32 label;
> atomic_t users;
> struct in6_addr dst;
> struct ipv6_txoptions *opt;
> unsigned long linger;
> u8 share;
> - u32 owner;
> + union {
> + struct pid *pid;
> + kuid_t uid;
> + } owner;
> unsigned long lastuse;
> unsigned long expires;
> struct net *fl_net;
> };
>
> #define IPV6_FLOWINFO_MASK cpu_to_be32(0x0FFFFFFF)
> #define IPV6_FLOWLABEL_MASK cpu_to_be32(0x000FFFFF)
>
> struct ipv6_fl_socklist {
> diff --git a/init/Kconfig b/init/Kconfig
> index 18ac3ff..fd0df2c 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -927,19 +927,18 @@ config UIDGID_CONVERTED
> depends on PROC_EVENTS = n
>
> # Networking
> depends on NET_9P = n
> depends on NET_CLS_FLOW = n
> depends on NETFILTER_XT_MATCH_OWNER = n
> depends on NETFILTER_XT_MATCH_RECENT = n
> depends on NETFILTER_XT_TARGET_LOG = n
> depends on NETFILTER_NETLINK_LOG = n
> - depends on IPV6 = n
> depends on AF_RXRPC = n
> depends on NET_KEY = n
> depends on INET_DIAG = n
> depends on DNS_RESOLVER = n
> depends on AX25 = n
>
> # Filesystems
> depends on USB_GADGETFS = n
> depends on USB_FUNCTIONFS = n
> diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
> index 9772fbd..dc2aedf 100644
> --- a/net/ipv6/ip6_flowlabel.c
> +++ b/net/ipv6/ip6_flowlabel.c
> @@ -16,18 +16,19 @@
> #include <linux/net.h>
> #include <linux/netdevice.h>
> #include <linux/if_arp.h>
> #include <linux/in6.h>
> #include <linux/route.h>
> #include <linux/proc_fs.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
> #include <linux/export.h>
> +#include <linux/pid_namespace.h>
>
> #include <net/net_namespace.h>
> #include <net/sock.h>
>
> #include <net/ipv6.h>
> #include <net/ndisc.h>
> #include <net/protocol.h>
> #include <net/ip6_route.h>
> #include <net/addrconf.h>
> @@ -84,18 +85,23 @@ static struct ip6_flowlabel *fl_lookup(struct net *net, __be32 label)
> if (fl)
> atomic_inc(&fl->users);
> read_unlock_bh(&ip6_fl_lock);
> return fl;
> }
>
>
> static void fl_free(struct ip6_flowlabel *fl)
> {
> + switch (fl->share) {
> + case IPV6_FL_S_PROCESS:
> + put_pid(fl->owner.pid);
> + break;
> + }
> if (fl) {
> release_net(fl->fl_net);
> kfree(fl->opt);
> }
> kfree(fl);
> }
>
> static void fl_release(struct ip6_flowlabel *fl)
> {
> @@ -388,22 +394,22 @@ fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq,
> goto done;
> }
> fl->dst = freq->flr_dst;
> atomic_set(&fl->users, 1);
> switch (fl->share) {
> case IPV6_FL_S_EXCL:
> case IPV6_FL_S_ANY:
> break;
> case IPV6_FL_S_PROCESS:
> - fl->owner = current->pid;
> + fl->owner.pid = get_task_pid(current, PIDTYPE_PID);
> break;
> case IPV6_FL_S_USER:
> - fl->owner = current_euid();
> + fl->owner.uid = current_euid();
> break;
> default:
> err = -EINVAL;
> goto done;
> }
> return fl;
>
> done:
> fl_free(fl);
> @@ -555,19 +561,22 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen)
> fl1 = fl_lookup(net, freq.flr_label);
> if (fl1) {
> recheck:
> err = -EEXIST;
> if (freq.flr_flags&IPV6_FL_F_EXCL)
> goto release;
> err = -EPERM;
> if (fl1->share == IPV6_FL_S_EXCL ||
> fl1->share != fl->share ||
> - fl1->owner != fl->owner)
> + ((fl1->share == IPV6_FL_S_PROCESS) &&
> + (fl1->owner.pid == fl->owner.pid)) ||
> + ((fl1->share == IPV6_FL_S_USER) &&
> + uid_eq(fl1->owner.uid, fl->owner.uid)))
> goto release;
>
> err = -EINVAL;
> if (!ipv6_addr_equal(&fl1->dst, &fl->dst) ||
> ipv6_opt_cmp(fl1->opt, fl->opt))
> goto release;
>
> err = -ENOMEM;
> if (sfl1 == NULL)
> @@ -615,18 +624,19 @@ done:
> fl_free(fl);
> kfree(sfl1);
> return err;
> }
>
> #ifdef CONFIG_PROC_FS
>
> struct ip6fl_iter_state {
> struct seq_net_private p;
> + struct pid_namespace *pid_ns;
> int bucket;
> };
>
> #define ip6fl_seq_private(seq) ((struct ip6fl_iter_state *)(seq)->private)
>
> static struct ip6_flowlabel *ip6fl_get_first(struct seq_file *seq)
> {
> struct ip6_flowlabel *fl = NULL;
> struct ip6fl_iter_state *state = ip6fl_seq_private(seq);
> @@ -693,56 +703,82 @@ static void *ip6fl_seq_next(struct seq_file *seq, void *v, loff_t *pos)
>
> static void ip6fl_seq_stop(struct seq_file *seq, void *v)
> __releases(ip6_fl_lock)
> {
> read_unlock_bh(&ip6_fl_lock);
> }
>
> static int ip6fl_seq_show(struct seq_file *seq, void *v)
> {
> + struct ip6fl_iter_state *state = ip6fl_seq_private(seq);
> if (v == SEQ_START_TOKEN)
> seq_printf(seq, "%-5s %-1s %-6s %-6s %-6s %-8s %-32s %s\n",
> "Label", "S", "Owner", "Users", "Linger", "Expires", "Dst", "Opt");
> else {
> struct ip6_flowlabel *fl = v;
> seq_printf(seq,
> "%05X %-1d %-6d %-6d %-6ld %-8ld %pi6 %-4d\n",
> (unsigned int)ntohl(fl->label),
> fl->share,
> - (int)fl->owner,
> + ((fl->share == IPV6_FL_S_PROCESS) ?
> + pid_nr_ns(fl->owner.pid, state->pid_ns) :
> + ((fl->share == IPV6_FL_S_USER) ?
> + from_kuid_munged(seq_user_ns(seq), fl->owner.uid) :
> + 0)),
> atomic_read(&fl->users),
> fl->linger/HZ,
> (long)(fl->expires - jiffies)/HZ,
> &fl->dst,
> fl->opt ? fl->opt->opt_nflen : 0);
> }
> return 0;
> }
>
> static const struct seq_operations ip6fl_seq_ops = {
> .start = ip6fl_seq_start,
> .next = ip6fl_seq_next,
> .stop = ip6fl_seq_stop,
> .show = ip6fl_seq_show,
> };
>
> static int ip6fl_seq_open(struct inode *inode, struct file *file)
> {
> - return seq_open_net(inode, file, &ip6fl_seq_ops,
> - sizeof(struct ip6fl_iter_state));
> + struct seq_file *seq;
> + struct ip6fl_iter_state *state;
> + int err;
> +
> + err = seq_open_net(inode, file, &ip6fl_seq_ops,
> + sizeof(struct ip6fl_iter_state));
> +
> + if (!err) {
> + seq = file->private_data;
> + state = ip6fl_seq_private(seq);
> + rcu_read_lock();
> + state->pid_ns = get_pid_ns(current->nsproxy->pid_ns);
> + rcu_read_unlock();
> + }
> + return err;
> +}
> +
> +static int ip6fl_seq_release(struct inode *inode, struct file *file)
> +{
> + struct seq_file *seq = file->private_data;
> + struct ip6fl_iter_state *state = ip6fl_seq_private(seq);
> + put_pid_ns(state->pid_ns);
> + return seq_release_net(inode, file);
> }
>
> static const struct file_operations ip6fl_seq_fops = {
> .owner = THIS_MODULE,
> .open = ip6fl_seq_open,
> .read = seq_read,
> .llseek = seq_lseek,
> - .release = seq_release_net,
> + .release = ip6fl_seq_release,
> };
>
> static int __net_init ip6_flowlabel_proc_init(struct net *net)
> {
> if (!proc_net_fops_create(net, "ip6_flowlabel",
> S_IRUGO, &ip6fl_seq_fops))
> return -ENOMEM;
> return 0;
> }
^ permalink raw reply
* ERROR: "pid_nr_ns" [net/ipv6/ipv6.ko] undefined!
From: wfg @ 2012-06-14 1:28 UTC (permalink / raw)
To: Eric W. Biederman; +Cc: netdev, Eric W. Biederman
[-- Attachment #1: Type: text/plain, Size: 590 bytes --]
FYI, kernel build failed on
tree: git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git user-namespace-v41
head: c4d23eefc4fdc44ac1b427f3b7c251281a90b6ee
commit: beb0cb4bdd4e1ab4d7522387cd7bc8edc4209c06 [9/97] net ip6 flowlabel: Make owner a union of struct pid * and kuid_t
config: i386-allmodconfig (attached as .config)
All related error/warning messages are:
ERROR: "pid_nr_ns" [net/ipv6/ipv6.ko] undefined!
---
0-DAY kernel build testing backend Open Source Technology Centre
Fengguang Wu <wfg@linux.intel.com> Intel Corporation
[-- Attachment #2: 0001-net-ip6-flowlabel-Make-owner-a-union-of-struct-pid-a.patch --]
[-- Type: text/x-diff, Size: 7818 bytes --]
>From beb0cb4bdd4e1ab4d7522387cd7bc8edc4209c06 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Thu, 24 May 2012 10:37:59 -0600
Subject: [PATCH] net ip6 flowlabel: Make owner a union of struct pid * and
kuid_t
Correct a long standing omission and use struct pid in the owner
field of struct ip6_flowlabel when the share type is IPV6_FL_S_PROCESS.
This guarantees we don't have issues when pid wraparound occurs.
Use a kuid_t in the owner field of struct ip6_flowlabel when the
share type is IPV6_FL_S_USER to add user namespace support.
In /proc/net/ip6_flowlabel capture the current pid namespace when
opening the file and release the pid namespace when the file is
closed ensuring we print the pid owner value that is meaning to
the reader of the file. Similarly use from_kuid_munged to print
uid values that are meaningful to the reader of the file.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
include/net/ipv6.h | 5 ++++-
init/Kconfig | 1 -
net/ipv6/ip6_flowlabel.c | 50 +++++++++++++++++++++++++++++++++++++++-------
3 files changed, 47 insertions(+), 9 deletions(-)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index aecf884..77df5e6 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -216,19 +216,22 @@ struct ipv6_txoptions {
struct ip6_flowlabel {
struct ip6_flowlabel *next;
__be32 label;
atomic_t users;
struct in6_addr dst;
struct ipv6_txoptions *opt;
unsigned long linger;
u8 share;
- u32 owner;
+ union {
+ struct pid *pid;
+ kuid_t uid;
+ } owner;
unsigned long lastuse;
unsigned long expires;
struct net *fl_net;
};
#define IPV6_FLOWINFO_MASK cpu_to_be32(0x0FFFFFFF)
#define IPV6_FLOWLABEL_MASK cpu_to_be32(0x000FFFFF)
struct ipv6_fl_socklist {
diff --git a/init/Kconfig b/init/Kconfig
index 18ac3ff..fd0df2c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -927,19 +927,18 @@ config UIDGID_CONVERTED
depends on PROC_EVENTS = n
# Networking
depends on NET_9P = n
depends on NET_CLS_FLOW = n
depends on NETFILTER_XT_MATCH_OWNER = n
depends on NETFILTER_XT_MATCH_RECENT = n
depends on NETFILTER_XT_TARGET_LOG = n
depends on NETFILTER_NETLINK_LOG = n
- depends on IPV6 = n
depends on AF_RXRPC = n
depends on NET_KEY = n
depends on INET_DIAG = n
depends on DNS_RESOLVER = n
depends on AX25 = n
# Filesystems
depends on USB_GADGETFS = n
depends on USB_FUNCTIONFS = n
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index 9772fbd..dc2aedf 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -16,18 +16,19 @@
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/in6.h>
#include <linux/route.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/pid_namespace.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/ipv6.h>
#include <net/ndisc.h>
#include <net/protocol.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
@@ -84,18 +85,23 @@ static struct ip6_flowlabel *fl_lookup(struct net *net, __be32 label)
if (fl)
atomic_inc(&fl->users);
read_unlock_bh(&ip6_fl_lock);
return fl;
}
static void fl_free(struct ip6_flowlabel *fl)
{
+ switch (fl->share) {
+ case IPV6_FL_S_PROCESS:
+ put_pid(fl->owner.pid);
+ break;
+ }
if (fl) {
release_net(fl->fl_net);
kfree(fl->opt);
}
kfree(fl);
}
static void fl_release(struct ip6_flowlabel *fl)
{
@@ -388,22 +394,22 @@ fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq,
goto done;
}
fl->dst = freq->flr_dst;
atomic_set(&fl->users, 1);
switch (fl->share) {
case IPV6_FL_S_EXCL:
case IPV6_FL_S_ANY:
break;
case IPV6_FL_S_PROCESS:
- fl->owner = current->pid;
+ fl->owner.pid = get_task_pid(current, PIDTYPE_PID);
break;
case IPV6_FL_S_USER:
- fl->owner = current_euid();
+ fl->owner.uid = current_euid();
break;
default:
err = -EINVAL;
goto done;
}
return fl;
done:
fl_free(fl);
@@ -555,19 +561,22 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen)
fl1 = fl_lookup(net, freq.flr_label);
if (fl1) {
recheck:
err = -EEXIST;
if (freq.flr_flags&IPV6_FL_F_EXCL)
goto release;
err = -EPERM;
if (fl1->share == IPV6_FL_S_EXCL ||
fl1->share != fl->share ||
- fl1->owner != fl->owner)
+ ((fl1->share == IPV6_FL_S_PROCESS) &&
+ (fl1->owner.pid == fl->owner.pid)) ||
+ ((fl1->share == IPV6_FL_S_USER) &&
+ uid_eq(fl1->owner.uid, fl->owner.uid)))
goto release;
err = -EINVAL;
if (!ipv6_addr_equal(&fl1->dst, &fl->dst) ||
ipv6_opt_cmp(fl1->opt, fl->opt))
goto release;
err = -ENOMEM;
if (sfl1 == NULL)
@@ -615,18 +624,19 @@ done:
fl_free(fl);
kfree(sfl1);
return err;
}
#ifdef CONFIG_PROC_FS
struct ip6fl_iter_state {
struct seq_net_private p;
+ struct pid_namespace *pid_ns;
int bucket;
};
#define ip6fl_seq_private(seq) ((struct ip6fl_iter_state *)(seq)->private)
static struct ip6_flowlabel *ip6fl_get_first(struct seq_file *seq)
{
struct ip6_flowlabel *fl = NULL;
struct ip6fl_iter_state *state = ip6fl_seq_private(seq);
@@ -693,56 +703,82 @@ static void *ip6fl_seq_next(struct seq_file *seq, void *v, loff_t *pos)
static void ip6fl_seq_stop(struct seq_file *seq, void *v)
__releases(ip6_fl_lock)
{
read_unlock_bh(&ip6_fl_lock);
}
static int ip6fl_seq_show(struct seq_file *seq, void *v)
{
+ struct ip6fl_iter_state *state = ip6fl_seq_private(seq);
if (v == SEQ_START_TOKEN)
seq_printf(seq, "%-5s %-1s %-6s %-6s %-6s %-8s %-32s %s\n",
"Label", "S", "Owner", "Users", "Linger", "Expires", "Dst", "Opt");
else {
struct ip6_flowlabel *fl = v;
seq_printf(seq,
"%05X %-1d %-6d %-6d %-6ld %-8ld %pi6 %-4d\n",
(unsigned int)ntohl(fl->label),
fl->share,
- (int)fl->owner,
+ ((fl->share == IPV6_FL_S_PROCESS) ?
+ pid_nr_ns(fl->owner.pid, state->pid_ns) :
+ ((fl->share == IPV6_FL_S_USER) ?
+ from_kuid_munged(seq_user_ns(seq), fl->owner.uid) :
+ 0)),
atomic_read(&fl->users),
fl->linger/HZ,
(long)(fl->expires - jiffies)/HZ,
&fl->dst,
fl->opt ? fl->opt->opt_nflen : 0);
}
return 0;
}
static const struct seq_operations ip6fl_seq_ops = {
.start = ip6fl_seq_start,
.next = ip6fl_seq_next,
.stop = ip6fl_seq_stop,
.show = ip6fl_seq_show,
};
static int ip6fl_seq_open(struct inode *inode, struct file *file)
{
- return seq_open_net(inode, file, &ip6fl_seq_ops,
- sizeof(struct ip6fl_iter_state));
+ struct seq_file *seq;
+ struct ip6fl_iter_state *state;
+ int err;
+
+ err = seq_open_net(inode, file, &ip6fl_seq_ops,
+ sizeof(struct ip6fl_iter_state));
+
+ if (!err) {
+ seq = file->private_data;
+ state = ip6fl_seq_private(seq);
+ rcu_read_lock();
+ state->pid_ns = get_pid_ns(current->nsproxy->pid_ns);
+ rcu_read_unlock();
+ }
+ return err;
+}
+
+static int ip6fl_seq_release(struct inode *inode, struct file *file)
+{
+ struct seq_file *seq = file->private_data;
+ struct ip6fl_iter_state *state = ip6fl_seq_private(seq);
+ put_pid_ns(state->pid_ns);
+ return seq_release_net(inode, file);
}
static const struct file_operations ip6fl_seq_fops = {
.owner = THIS_MODULE,
.open = ip6fl_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release_net,
+ .release = ip6fl_seq_release,
};
static int __net_init ip6_flowlabel_proc_init(struct net *net)
{
if (!proc_net_fops_create(net, "ip6_flowlabel",
S_IRUGO, &ip6fl_seq_fops))
return -ENOMEM;
return 0;
}
--
1.7.10
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 153548 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.5.0-rc1 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_WANT_INTEL_MID=y
CONFIG_X86_INTEL_MID=y
CONFIG_X86_MDFLD=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_NUMAQ=y
# CONFIG_STA2X11 is not set
CONFIG_X86_SUMMIT=y
CONFIG_X86_ES7000=y
CONFIG_X86_32_IRIS=m
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_SUMMIT_NUMA=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_APB_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=4
CONFIG_HAVE_ARCH_ALLOC_REMAP=y
CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=m
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=m
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=m
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_GEOS=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_UNIX=m
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=m
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_PCH_CAN=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCMCIA=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_TSCAN1=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_TKIP_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
CONFIG_MAC80211_VERBOSE_MPATH_DEBUG=y
CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y
# CONFIG_MAC80211_VERBOSE_MESH_SYNC_DEBUG is not set
CONFIG_MAC80211_VERBOSE_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=m
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=m
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=m
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_HCI is not set
CONFIG_NFC_LLCP=y
#
# Near Field Communication (NFC) devices
#
CONFIG_PN544_NFC=m
CONFIG_NFC_PN533=m
CONFIG_NFC_WILINK=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_CMA is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
CONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_BCH=m
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_NVME=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RBD=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_INTEL_MID_PTI=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
CONFIG_IWMC3200TOP_DEBUG=y
CONFIG_IWMC3200TOP_DEBUGFS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_CS5536=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=m
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_DEBUG_SPACE_MAPS=y
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_MII=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=m
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=m
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=m
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=m
CONFIG_NET_DSA_MV88E6123_61_65=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_DEPCA=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=m
CONFIG_CS89x0_PLATFORM=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_EWRK3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
CONFIG_VXGE_DEBUG_TRACE_ALL=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_AT1700=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_ETH16I=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGB_PTP=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
# CONFIG_IXGBE_PTP is not set
CONFIG_IXGBEVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_APRICOT=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_LP486E=m
CONFIG_NI52=m
CONFIG_ZNET=m
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_EL2=m
CONFIG_AC3200=m
CONFIG_PCMCIA_AXNET=m
CONFIG_E2100=m
CONFIG_ES3210=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LNE390=m
CONFIG_NE2000=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_PCMCIA_PCNET=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_WD80x3=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_PCH_PTP=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_SEEQ8005=m
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PLATFORM is not set
# CONFIG_STMMAC_PCI is not set
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
CONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=m
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_MICREL_KS8995MA=m
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_DEBUG=y
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_MAC_DEBUG=y
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
CONFIG_ATH6KL_DEBUG=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_BCMA_EXTRA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_SDIO_OOB is not set
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMDBG=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=m
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=m
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_IWLWIFI_DEVICE_TESTMODE=y
CONFIG_IWLWIFI_P2P=y
CONFIG_IWLWIFI_EXPERIMENTAL_MFP=y
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_IWM=m
CONFIG_IWM_DEBUG=y
CONFIG_IWM_TRACING=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
# CONFIG_WL_TI is not set
CONFIG_ZD1211RW=m
CONFIG_ZD1211RW_DEBUG=y
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
# CONFIG_MWIFIEX_USB is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_VMXNET3=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
CONFIG_GIGASET_DEBUG=y
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_STMPE=m
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TC3589X=m
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=m
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_DA9034=m
# CONFIG_TOUCHSCREEN_DA9052 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_INTEL_MID=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=m
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX3107=m
CONFIG_SERIAL_MRST_MAX3110=m
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_IFX6X60=m
CONFIG_SERIAL_PCH_UART=m
CONFIG_SERIAL_XILINX_PS_UART=m
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EG20T=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_INTEL_MID=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_STUB=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_TOPCLIFF_PCH=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MID_DMA=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_IT8761E=m
CONFIG_GPIO_SCH=m
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_VX855=m
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=m
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ADP5588=m
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_RDC321X=m
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_74X164=m
#
# AC97 GPIO expanders:
#
CONFIG_GPIO_UCB1400=y
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_MSIC is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
CONFIG_BATTERY_INTEL_MID=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_SMB347=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TWL4030_MADC=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_APPLESMC=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_RDC321X_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=m
CONFIG_HTC_I2CPLD=y
CONFIG_UCB1400_CORE=m
# CONFIG_MFD_LM3533 is not set
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_MADC=m
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6030_PWM=m
CONFIG_TWL6040_CORE=y
CONFIG_MFD_STMPE=y
#
# STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_S5M_CORE=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=m
CONFIG_EZX_PCAP=y
CONFIG_MFD_CS5535=m
CONFIG_MFD_TIMBERDALE=m
CONFIG_LPC_SCH=m
CONFIG_LPC_ICH=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_INTEL_MSIC=y
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_PALMAS is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_DA903X=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_PCF50633=m
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_AB3100=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8994=m
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_RC_CORE=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_VIVI=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_AU0828=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_V4L_PCI_DRIVERS=y
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_V4L_ISA_PARPORT_DRIVERS=y
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_W9966=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_VIA_CAMERA=m
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_SOC_CAMERA_OV2640=m
CONFIG_SOC_CAMERA_OV5642=m
CONFIG_SOC_CAMERA_OV6650=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_SOC_CAMERA_OV9740=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_TESTDEV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_KEENE=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_TIMBERDALE=m
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_ISA=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_IT913X=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_AF9035 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m
#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m
#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m
#
# Supported ddbridge ('Octopus') Adapters
#
CONFIG_DVB_DDBRIDGE=m
#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_HD29L2=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_MEDFIELD=y
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=m
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_AUO_K190X is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_OT200=m
CONFIG_BACKLIGHT_PANDORA=m
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_OPL4_LIB_SEQ=m
CONFIG_SND_SBAWE_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT1605=m
CONFIG_SND_AZT2316=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_JAZZ16=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_MFLD_MACHINE=m
CONFIG_SND_SST_PLATFORM=m
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_88PM860X=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_AD1836=m
CONFIG_SND_SOC_AD193X=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADAU1373=m
CONFIG_SND_SOC_ADAV80X=m
CONFIG_SND_SOC_ADS117X=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_AK4641=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_ALC5632=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CX20442=m
CONFIG_SND_SOC_JZ4740_CODEC=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_DFBMCS320=m
CONFIG_SND_SOC_LM49453=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98095=m
CONFIG_SND_SOC_MAX9850=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SN95031=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC26=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320DAC33=m
CONFIG_SND_SOC_TWL4030=m
CONFIG_SND_SOC_TWL6040=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WL1273=m
CONFIG_SND_SOC_WM1250_EV1=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM2200=m
CONFIG_SND_SOC_WM5100=m
CONFIG_SND_SOC_WM8350=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8983=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8991=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WM8995=m
CONFIG_SND_SOC_WM8996=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SND_SOC_LM4857=m
CONFIG_SND_SOC_MAX9768=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_ML26124=m
CONFIG_SND_SOC_TPA6130A2=m
# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# Special HID drivers
#
CONFIG_HID_GENERIC=m
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_TUSB6010=m
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_RENESAS_USBHS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
# CONFIG_USB_SERIAL_QT2 is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
#
# USB Physical Layer drivers
#
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
CONFIG_USB_R8A66597=m
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_MV_UDC=m
CONFIG_USB_GADGET_MUSB_HDRC=m
CONFIG_USB_M66592=m
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_GADGET_SUPERSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ZERO_HNPTEST=y
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_TWL4030_USB=m
CONFIG_TWL6030_USB=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA9633=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=m
CONFIG_INFINIBAND_CXGB3_DEBUG=y
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
CONFIG_INFINIBAND_NES_DEBUG=y
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MCE_INJ=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TWL4030=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_VRTC=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=m
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=m
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_STAGING=y
CONFIG_ET131X=m
CONFIG_SLICOSS=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
CONFIG_USBIP_DEBUG=y
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
CONFIG_COMEDI_ISA_DRIVERS=m
CONFIG_COMEDI_ACL7225B=m
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL725=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_PCM3730=m
# CONFIG_COMEDI_AMPLC_DIO200_ISA is not set
# CONFIG_COMEDI_AMPLC_PC236_ISA is not set
# CONFIG_COMEDI_AMPLC_PC263_ISA is not set
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAS16M1=m
# CONFIG_COMEDI_DAS08_ISA is not set
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_POC=m
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_ADDI_APCI_035=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2016=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3001=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7230=m
CONFIG_COMEDI_ADL_PCI7296=m
CONFIG_COMEDI_ADL_PCI7432=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI_DIO=m
# CONFIG_COMEDI_AMPLC_DIO200_PCI is not set
# CONFIG_COMEDI_AMPLC_PC236_PCI is not set
# CONFIG_COMEDI_AMPLC_PC263_PCI is not set
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
# CONFIG_COMEDI_DAS08_PCI is not set
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_UNIOXX5=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIDIO=m
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_SSV_DNP=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_NI_COMMON=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_FC=m
CONFIG_COMEDI_DAS08=m
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_RTS_PSTOR=m
CONFIG_RTS_PSTOR_DEBUG=y
CONFIG_RTS5139=m
CONFIG_RTS5139_DEBUG=y
CONFIG_TRANZPORT=m
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
CONFIG_LINE6_USB_DEBUG=y
CONFIG_LINE6_USB_DUMP_CTRL=y
CONFIG_LINE6_USB_DUMP_MIDI=y
CONFIG_LINE6_USB_DUMP_PCM=y
CONFIG_LINE6_USB_RAW=y
CONFIG_LINE6_USB_IMPULSE_RESPONSE=y
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_VT6655=m
CONFIG_VT6656=m
CONFIG_DX_SEP=m
#
# IIO staging drivers
#
CONFIG_IIO_ST_HWMON=m
CONFIG_IIO_SW_RING=m
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16203=m
CONFIG_ADIS16204=m
CONFIG_ADIS16209=m
CONFIG_ADIS16220=m
CONFIG_ADIS16240=m
CONFIG_KXSD9=m
CONFIG_LIS3L02DQ=m
CONFIG_LIS3L02DQ_BUF_KFIFO=y
# CONFIG_LIS3L02DQ_BUF_RING_SW is not set
CONFIG_SCA3000=m
#
# Analog to digital converters
#
CONFIG_AD7291=m
CONFIG_AD7298=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD799X=m
CONFIG_AD799X_RING_BUFFER=y
CONFIG_AD7476=m
CONFIG_AD7887=m
CONFIG_AD7780=m
CONFIG_AD7793=m
CONFIG_AD7816=m
CONFIG_AD7192=m
CONFIG_ADT7310=m
CONFIG_ADT7410=m
CONFIG_AD7280=m
CONFIG_MAX1363=m
CONFIG_MAX1363_RING_BUFFER=y
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7152=m
CONFIG_AD7746=m
#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5624R_SPI=m
CONFIG_AD5446=m
CONFIG_AD5504=m
CONFIG_AD5764=m
CONFIG_AD5791=m
CONFIG_AD5686=m
CONFIG_MAX517=m
#
# Direct Digital Synthesis
#
CONFIG_AD5930=m
CONFIG_AD9832=m
CONFIG_AD9834=m
CONFIG_AD9850=m
CONFIG_AD9852=m
CONFIG_AD9910=m
CONFIG_AD9951=m
#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=m
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16260=m
CONFIG_ADXRS450=m
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
#
# Inertial measurement units
#
CONFIG_ADIS16400=m
#
# Light sensors
#
CONFIG_SENSORS_ISL29018=m
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
# CONFIG_TSL2x7x is not set
#
# Magnetometer sensors
#
CONFIG_SENSORS_AK8975=m
CONFIG_SENSORS_HMC5843=m
#
# Active energy metering IC
#
CONFIG_ADE7753=m
CONFIG_ADE7754=m
CONFIG_ADE7758=m
CONFIG_ADE7759=m
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m
#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
CONFIG_AD2S1210=m
#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=m
CONFIG_IIO_GPIO_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
CONFIG_IIO_DUMMY_EVGEN=m
CONFIG_IIO_SIMPLE_DUMMY=m
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
CONFIG_ZRAM=m
CONFIG_ZRAM_DEBUG=y
CONFIG_ZCACHE=y
CONFIG_ZSMALLOC=y
CONFIG_WLAGS49_H2=m
CONFIG_WLAGS49_H25=m
CONFIG_FB_SM7XX=m
CONFIG_CRYSTALHD=m
CONFIG_CXT1E1=m
CONFIG_SBE_PMCC4_NCOMM=y
CONFIG_FB_XGI=m
CONFIG_ACPI_QUICKSTART=m
CONFIG_SBE_2T3E3=m
CONFIG_USB_ENESTORAGE=m
CONFIG_BCM_WIMAX=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
CONFIG_FT1000_PCMCIA=m
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_AS102=m
CONFIG_DVB_CXD2099=m
CONFIG_VIDEO_DT3155=m
CONFIG_DT3155_CCIR=y
CONFIG_DT3155_STREAMING=y
CONFIG_EASYCAP=m
CONFIG_EASYCAP_DEBUG=y
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_GO7007_OV7640=m
CONFIG_VIDEO_GO7007_SAA7113=m
CONFIG_VIDEO_GO7007_SAA7115=m
CONFIG_VIDEO_GO7007_TW9903=m
CONFIG_VIDEO_GO7007_UDA1342=m
CONFIG_VIDEO_GO7007_SONY_TUNER=m
CONFIG_VIDEO_GO7007_TW2804=m
CONFIG_SOLO6X10=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_TTUSBIR=m
CONFIG_LIRC_ZILOG=m
#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=m
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO=m
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
# CONFIG_ANDROID_INTF_ALARM_DEV is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
CONFIG_USB_WPAN_HCD=m
# CONFIG_IPACK_BUS is not set
# CONFIG_WIMAX_GDM72XX is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_LAPTOP_DEBUG=y
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_GPIO_INTEL_PMIC=y
CONFIG_INTEL_MID_POWER_BUTTON=m
CONFIG_INTEL_MFLD_THERMAL=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=m
CONFIG_XO15_EBOOK=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Analog to digital converters
#
#
# Amplifiers
#
# CONFIG_AD8366 is not set
CONFIG_VME_BUS=m
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m
#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_VME_PIO2=m
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
CONFIG_GOOGLE_SMI=m
CONFIG_GOOGLE_MEMCONSOLE=m
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EXOFS_FS=m
CONFIG_EXOFS_DEBUG=y
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_FAULT_INJECTION=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_TRACE=y
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_LKDTM=m
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not set
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_TEST_SYSCALLS=y
CONFIG_MMIOTRACE=y
CONFIG_MMIOTRACE_TEST=m
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_KSTRTOX=m
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_INTEL_MID=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_YAMA=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_IMA_LSM_RULES=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_YAMA is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
CONFIG_LGUEST=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
^ permalink raw reply related
* Re: [net-next.git 1/4 (v5)] phy: add the EEE support and the way to access to the MMD registers.
From: Ben Hutchings @ 2012-06-13 23:28 UTC (permalink / raw)
To: Giuseppe CAVALLARO; +Cc: netdev, eric.dumazet, rayagond, davem, yuvalmin
In-Reply-To: <1339574463-1207-2-git-send-email-peppe.cavallaro@st.com>
On Wed, 2012-06-13 at 10:01 +0200, Giuseppe CAVALLARO wrote:
> This patch adds the support for the Energy-Efficient Ethernet (EEE)
> to the Physical Abstraction Layer.
> To support the EEE we have to access to the MMD registers 3.20 and
> 7.60/61. So two new functions have been added to read/write the MMD
> registers (clause 45).
>
> An Ethernet driver (I tested the stmmac) can invoke the phy_init_eee to properly
> check if the EEE is supported by the PHYs and it can also set the clock
> stop enable bit in the 3.0 register.
> The phy_get_eee_err can be used for reporting the number of time where
> the PHY failed to complete its normal wake sequence.
>
> In the end, this patch also adds the EEE ethtool support implementing:
> o phy_ethtool_set_eee
> o phy_ethtool_get_eee
>
> v1: initial patch
> v2: fixed some errors especially on naming convention
> v3: renamed again the mmd read/write functions thank to Ben's feedback
> v4: moved file to phy.c and added the ethtool support.
> v5: fixed phy_adv_to_eee, phy_eee_to_supported, phy_eee_to_adv return
> values according to ethtool API (thanks to Ben's feedback).
> Renamed some macros to avoid too long names.
Sorry, I spotted some more little issues:
[...]
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
[...]
> +/**
> + * phy_read_mmd_indirect - reads data from the MMC register (clause 22 to
> + * access to clause 45)
The short description has to fit on the same line as the name; the
kernel-doc processing tools will not unwrap these two lines.
> + * @bus: the target MII bus
> + * @prtad: MMD Address
> + * @devad: MMD DEVAD
> + * @addr: PHY address on the MII bus
> + *
> + * Description: Reads data from the MMD regisetrs of the
Typo: regisetrs -> registers.
> + * phy addr. To read these register we have:
> + * 1) Write reg 13 // DEVAD
> + * 2) Write reg 14 // MMD Address
> + * 3) Write reg 13 // MMD Data Command for MMD DEVAD
> + * 3) Read reg 14 // Read MMD data
> + */
> +static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
> + int addr)
> +{
> + u32 ret;
> +
> + mmd_phy_indirect(bus, prtad, devad, addr);
> +
> + /* Read the content of the MMD's selected register */
> + ret = bus->read(bus, addr, MII_MMD_DATA);
> +
> + return ret;
> +}
> +
> +/**
> + * phy_write_mmd_indirect - writes data to the MMC register (clause 22 to
> + * access to clause 45)
Same line-wrapping problem here.
> + * @bus: the target MII bus
> + * @prtad: MMD Address
> + * @devad: MMD DEVAD
> + * @addr: PHY address on the MII bus
> + * @data: data to write in the MMD register
> + *
> + * Description: Reads data from the MMD regisetrs of the
> + * phy addr. To read these register we have:
> + * 1) Write reg 13 // DEVAD
> + * 2) Write reg 14 // MMD Address
> + * 3) Write reg 13 // MMD Data Command for MMD DEVAD
> + * 3) Write reg 14 // Write MMD data
> + */
> +static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
> + int addr, u32 data)
> +{
> + mmd_phy_indirect(bus, prtad, devad, addr);
> +
> + /* Write the data into MMD's selected register */
> + bus->write(bus, addr, MII_MMD_DATA, data);
> +}
> +
> +/* phy_init_eee
If this is meant to be a kernel-doc comment, it needs to start with
'/**\n' and have a short summary must be added after the function name.
> + * @phydev: target phy_device struct
> + * @clk_stop_enable: PHY may stop the clock during LPI
> + *
> + * Description: it checks if the Energy-Efficient Ethernet (EEE)
> + * is supported by looking at the MMD registers 3.20 and 7.60/61
> + * and it programs the MMD register 3.0 setting the "Clock stop enable"
> + * bit if required.
> + * In fact, the clk_stop_enable can be passed to:
> + * 1 = The PHY may stop the clock during LPI
> + * 0 = Clock not stoppable
I think these last three lines are redundant with the short description
of clk_stop_enable.
> + */
> +int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
> +{
> + int ret = -EPROTONOSUPPORT;
> +
> + /* According to 802.3az,the EEE is supported only in full duplex-mode.
> + * Also EEE feature is active when core is operating with MII, GMII
> + * or RGMII.
> + */
> + if ((phydev->duplex == DUPLEX_FULL) &&
> + ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
> + (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
> + (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
> + int eee_cap, eee_link;
> +
> + /* EEE ability must be supported in both local and remote
> + * PHY devices.
> + */
> + eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
> + MDIO_MMD_AN, phydev->addr);
> + if (eee_cap < 0)
> + return eee_cap;
> +
> + eee_link = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
> + MDIO_MMD_PCS, phydev->addr);
> + if (eee_link < 0)
> + return eee_link;
> +
> + if (eee_cap && eee_link) {
I don't see any harm in setting the 'clock stop' bit if requested, even
if EEE is not supported and therefore we will never receive LPI from the
link partner.
But you also use this condition to decide whether to enable TX LPI, so
it's important that it does match the specification (§78.3) for whether
EEE is supported - but it doesn't. You need to work out what mode was
autonegotiated, then check that the relevant bit is set in both our EEE
advertising (*not* supported) and the LP EEE advertising masks.
[...]
> +/* phy_get_eee_err
[...]
> +/* phy_ethtool_get_eee
[...]
> +/* phy_ethtool_set_eee
[...]
Also not valid kernel-doc comments.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: [PATCH net-next] bonding: drop_monitor aware
From: David Miller @ 2012-06-13 23:00 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev, fubar
In-Reply-To: <1339601407.22704.380.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 13 Jun 2012 17:30:07 +0200
> From: Eric Dumazet <edumazet@google.com>
>
> When packets are dropped in TX path, its better to use kfree_skb()
> instead of dev_kfree_skb() to give proper drop_monitor events.
>
> Also move the kfree_skb() call after read_unlock() in bond_alb_xmit()
> and bond_xmit_activebackup()
>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied, thanks Eric.
^ permalink raw reply
* Re: [PATCH] bnx2x: fix checksum validation
From: David Miller @ 2012-06-13 22:59 UTC (permalink / raw)
To: eilong
Cc: eric.dumazet, netdev, therbert, evansr, willemb, yanivr, meravs,
yuvalmin
In-Reply-To: <1339597263.15601.0.camel@lb-tlvb-eilong.il.broadcom.com>
From: "Eilon Greenstein" <eilong@broadcom.com>
Date: Wed, 13 Jun 2012 17:21:03 +0300
> Thanks Erik. This leaves me with just one thing to add:
> Acked-by: Eilon Greenstein <eilong@broadcom.com>
Applied, and queued up for -stable, thanks.
^ permalink raw reply
* Re: [PATCH] netpoll: fix netpoll_send_udp() bugs
From: David Miller @ 2012-06-13 22:58 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev, bogdan.hamciuc, herbert, nhorman
In-Reply-To: <1339565421.22704.310.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 13 Jun 2012 07:30:21 +0200
> From: Eric Dumazet <edumazet@google.com>
>
> Bogdan Hamciuc diagnosed and fixed following bug in netpoll_send_udp() :
>
> "skb->len += len;" instead of "skb_put(skb, len);"
>
> Meaning that _if_ a network driver needs to call skb_realloc_headroom(),
> only packet headers would be copied, leaving garbage in the payload.
>
> However the skb_realloc_headroom() must be avoided as much as possible
> since it requires memory and netpoll tries hard to work even if memory
> is exhausted (using a pool of preallocated skbs)
>
> It appears netpoll_send_udp() reserved 16 bytes for the ethernet header,
> which happens to work for typicall drivers but not all.
>
> Right thing is to use LL_RESERVED_SPACE(dev)
> (And also add dev->needed_tailroom of tailroom)
>
> This patch combines both fixes.
>
> Many thanks to Bogdan for raising this issue.
>
> Reported-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
> Tested-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Applied and queued up for -stable, thanks Eric.
^ permalink raw reply
* Re: [PATCH 0/8] dcbnl: Major simplifications
From: David Miller @ 2012-06-13 22:55 UTC (permalink / raw)
To: tgraf; +Cc: netdev, lucy.liu, john.r.fastabend, alexander.h.duyck
In-Reply-To: <cover.1339591572.git.tgraf@suug.ch>
From: Thomas Graf <tgraf@suug.ch>
Date: Wed, 13 Jun 2012 14:54:53 +0200
> The dcbnl code is overly complicated when constructing the reply
> message. This series of patches simplifies the process and
> introduces consistent error codes allowing user space to figure
> out what went wrong.
>
> Patches have been tested with ixgbe in a FCoE setup.
>
> Thomas Graf (8):
> dcbnl: Prepare framework to shorten handling functions
> dcbnl: Shorten all command handling functions
> dcbnl: Remove now unused dcbnl_reply()
> dcbnl: Use dcbnl_newmsg() where possible
> dcbnl: Return consistent error codes
> dcbnl: Move dcb app lookup code into dcb_app_lookup()
> dcbnl: Move dcb app allocation into dcb_app_add()
> dcbnl: Use type safe nlmsg_data()
Lots of deleted code, I like it :-)
Applied, but could you send a follow-on patch to use BUG_ON() instead
of that "if (!ptr) { /* ... */ BUG(); }" construct?
Thanks.
^ permalink raw reply
* Re: [net-next patch 8/12] bnx2x: Allow up to 63 RSS queues default 8 queues
From: David Miller @ 2012-06-13 22:35 UTC (permalink / raw)
To: eilong; +Cc: eric.dumazet, meravs, netdev
In-Reply-To: <1339595609.13000.15.camel@lb-tlvb-eilong.il.broadcom.com>
From: "Eilon Greenstein" <eilong@broadcom.com>
Date: Wed, 13 Jun 2012 16:53:29 +0300
> Just to emphasis, since this is the patch series that enable the users
> to control the number of queues, we can reduce the default number and
> allow the user to increase it if he has a setup that needs more than 8
> parallel CPUs to receive the traffic. When using a new FW on the board,
> the number can be increased up to 64, so using the maximal number can be
> an overkill (even if the machine has 64 CPUs, it does not mean that the
> user would like us to consume 64 MSI-X vectors and all the memory to set
> up 64 queues) - so a lower default value can be used to satisfy most
> users while allowing them to increase the number if they wish.
I think you should look at other drivers for guidance in this area.
There is zero value in each and every driver author deciding what
is a good default strategy, because this means the user gets a
very inconsistent experience based purely upon the driver author's
whims.
^ permalink raw reply
* Re: [PATCH 2/5] drivers/net/ethernet/dec/tulip: Use standard __set_bit_le() function
From: Takuya Yoshikawa @ 2012-06-13 22:28 UTC (permalink / raw)
To: Grant Grundler
Cc: Akinobu Mita, Takuya Yoshikawa, akpm, bhutchings, grundler, arnd,
benh, avi, mtosatti, linux-net-drivers, netdev, linux-kernel,
linux-arch, kvm
In-Reply-To: <CAP6odji_JvRkJP1dSzGK5ww3y71h4k6pXyj4pOQBpqP-X7Nn-A@mail.gmail.com>
On Wed, 13 Jun 2012 08:21:18 -0700
Grant Grundler <grantgrundler@gmail.com> wrote:
> >> >> Should this hash_table be converted from u16 hash_table[32] to
> >> >> DECLARE_BITMAP(hash_table, 16 * 32) to ensure that it is aligned
> >> >> on long-word boundary?
> >> >
> >> > I think hash_table is already long-word aligned because it is placed
> >> > right after a pointer.
> >>
> >> I recommend converting to proper bitmap. Because such an implicit
> >> assumption is easily broken by someone touching this function.
> >
> > Do you mean something like:
> > DECLARE_BITMAP(__hash_table, 16 * 32);
> > u16 *hash_table = (u16 *)__hash_table;
> > ?
> >
> > Grant, what do you think about this?
>
> Hi Takuya,
> two thoughts:
> 1) while I agree with Akinobu and thank him for pointing out a
> _potential_ alignment problem, this is a separate issue and your
> existing patch should go in anyway. There are probably other drivers
> with _potential_ alignment issues. Akinobu could get credit for
> finding them by submitting patches after reviewing calls to set_bit
> and set_bit_le() - similar to what you are doing now.
I prefer approach 1.
hash_table is local in build_setup_frame_hash(), so if further
improvement is also required, we can do that locally there later.
Thanks,
Takuya
> 2) I generally do not like declaring one type and then using an alias
> of a different type to reference the same memory address. We have a
> simple alternative since hash_table[] is indexed directly only in one
> hunk of code:
> for (i = 0; i < 32; i++) {
> *setup_frm++ = ((u16 *)hash_table)[i];
> *setup_frm++ = ((u16 *)hash_table)[i];
> }
^ permalink raw reply
* Re: [PATCH 1/1 v3] Ethtool: Add EEE support
From: Ben Hutchings @ 2012-06-13 21:39 UTC (permalink / raw)
To: Yuval Mintz; +Cc: netdev, eilong, peppe.cavallaro
In-Reply-To: <1339318088-27126-1-git-send-email-yuvalmin@broadcom.com>
On Sun, 2012-06-10 at 11:48 +0300, Yuval Mintz wrote:
> This patch adds 2 new ethtool commands which can be
> used to manipulate network interfaces' support in
> EEE.
>
> Output of 'get' has the following form:
>
> EEE Settings for p2p1:
> EEE status: enabled - active
> Tx LPI: 1000 (us)
> Supported EEE link modes: 10000baseT/Full
> Advertised EEE link modes: 10000baseT/Full
> Link partner advertised EEE link modes: 10000baseT/Full
>
> Thanks goes to Giuseppe Cavallaro for his original patch.
>
> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
[...]
Applied, thanks.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* [PATCH] leds: Rename led_brightness_set() to led_set_brightness()
From: Shuah Khan @ 2012-06-13 20:34 UTC (permalink / raw)
To: bryan.wu, rpurdie, johannes, linville, davem
Cc: shuahkhan, LKML, linux-wireless, netdev
Rename leds external interface led_brightness_set() to led_set_brightness().
This is the second phase of the change to reduce confusion between the
leds internal and external interfaces that set brightness. With this change,
now the external interface is led_set_brightness(). The first phase renamed
the internal interface led_set_brightness() to __led_set_brightness().
There are no changes to the interface implementations.
Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
---
drivers/leds/led-class.c | 2 +-
drivers/leds/led-core.c | 4 ++--
drivers/leds/led-triggers.c | 2 +-
drivers/leds/ledtrig-oneshot.c | 2 +-
drivers/leds/ledtrig-timer.c | 2 +-
include/linux/leds.h | 4 ++--
net/mac80211/led.c | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index cb0a6eb..c599095 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -222,7 +222,7 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
#endif
/* Stop blinking */
- led_brightness_set(led_cdev, LED_OFF);
+ led_set_brightness(led_cdev, LED_OFF);
device_unregister(led_cdev->dev);
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index 176961b..8a09c5f 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -103,7 +103,7 @@ void led_blink_set_oneshot(struct led_classdev *led_cdev,
}
EXPORT_SYMBOL(led_blink_set_oneshot);
-void led_brightness_set(struct led_classdev *led_cdev,
+void led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
/* stop and clear soft-blink timer */
@@ -113,4 +113,4 @@ void led_brightness_set(struct led_classdev *led_cdev,
__led_set_brightness(led_cdev, brightness);
}
-EXPORT_SYMBOL(led_brightness_set);
+EXPORT_SYMBOL(led_set_brightness);
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index f8b14dd..57721f2 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -112,7 +112,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
if (led_cdev->trigger->deactivate)
led_cdev->trigger->deactivate(led_cdev);
led_cdev->trigger = NULL;
- led_brightness_set(led_cdev, LED_OFF);
+ led_set_brightness(led_cdev, LED_OFF);
}
if (trig) {
write_lock_irqsave(&trig->leddev_list_lock, flags);
diff --git a/drivers/leds/ledtrig-oneshot.c b/drivers/leds/ledtrig-oneshot.c
index 5cbab41..2c029aa 100644
--- a/drivers/leds/ledtrig-oneshot.c
+++ b/drivers/leds/ledtrig-oneshot.c
@@ -177,7 +177,7 @@ static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
}
/* Stop blinking */
- led_brightness_set(led_cdev, LED_OFF);
+ led_set_brightness(led_cdev, LED_OFF);
}
static struct led_trigger oneshot_led_trigger = {
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index 9010f7a..f774d05 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -104,7 +104,7 @@ static void timer_trig_deactivate(struct led_classdev *led_cdev)
}
/* Stop blinking */
- led_brightness_set(led_cdev, LED_OFF);
+ led_set_brightness(led_cdev, LED_OFF);
}
static struct led_trigger timer_led_trigger = {
diff --git a/include/linux/leds.h b/include/linux/leds.h
index dd93a22..3aade1d 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -124,7 +124,7 @@ extern void led_blink_set_oneshot(struct led_classdev *led_cdev,
unsigned long *delay_off,
int invert);
/**
- * led_brightness_set - set LED brightness
+ * led_set_brightness - set LED brightness
* @led_cdev: the LED to set
* @brightness: the brightness to set it to
*
@@ -132,7 +132,7 @@ extern void led_blink_set_oneshot(struct led_classdev *led_cdev,
* software blink timer that implements blinking when the
* hardware doesn't.
*/
-extern void led_brightness_set(struct led_classdev *led_cdev,
+extern void led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness);
/*
diff --git a/net/mac80211/led.c b/net/mac80211/led.c
index 1bf7903..bcffa69 100644
--- a/net/mac80211/led.c
+++ b/net/mac80211/led.c
@@ -276,7 +276,7 @@ static void ieee80211_stop_tpt_led_trig(struct ieee80211_local *local)
read_lock(&tpt_trig->trig.leddev_list_lock);
list_for_each_entry(led_cdev, &tpt_trig->trig.led_cdevs, trig_list)
- led_brightness_set(led_cdev, LED_OFF);
+ led_set_brightness(led_cdev, LED_OFF);
read_unlock(&tpt_trig->trig.leddev_list_lock);
}
--
1.7.9.5
^ permalink raw reply related
* Re: PPPoE performance regression
From: Karl Hiramoto @ 2012-06-13 20:17 UTC (permalink / raw)
To: David Woodhouse; +Cc: Nathan Williams, David S. Miller, netdev
In-Reply-To: <1339317136.2851.54.camel@shinybook.infradead.org>
On 06/10/12 10:32, David Woodhouse wrote:
> On Sun, 2012-06-10 at 10:50 +1000, Nathan Williams wrote:
>>> When using iperf with UDP, we can get 20Mbps downstream, but only about
>>> 15Mbps throughput when using TCP on a short ADSL line (line sync at
>>> 25Mbps). Using iperf to send UDP traffic upstream at the same time
>>> doesn't affect the downstream rate.
>> ...
>>
>> I found the change responsible for the performance problem and rebuilt
>> OpenWrt with the patch reversed on kernel 3.3.8 to confirm everything
>> still works. So the TX buffer is getting full, which causes the netif
>> queue to be stopped and restarted after some skbs have been freed?
> The *Ethernet* netif queue, yes. But not the PPP netif queue, I believe.
> I think the PPP code keeps just blindly calling dev_queue_xmit() and
> throwing away packets when they're not accepted.
>
>> commit 137742cf9738f1b4784058ff79aec7ca85e769d4
>> Author: Karl Hiramoto <karl@hiramoto.org>
>> Date: Wed Sep 2 23:26:39 2009 -0700
>>
>> atm/br2684: netif_stop_queue() when atm device busy and
>> netif_wake_queue() when we can send packets again.
> Nice work; well done finding that. I've added Karl and DaveM, and the
> netdev@ list to Cc.
>
> (Btw, I assume the performance problem also goes away if you use PPPoA?
> I've made changes in the PPPoA code recently to *eliminate* excessive
> calls to netif_wake_queue(), and also to stop it from filling the ATM
> device queue. That was commit 9d02daf7 in 3.5-rc1, which is already in
> OpenWRT.)
>
> I was already looking vaguely at how we could limit the PPP queue depth
> for PPPoE and implement byte queue limits. Currently the PPP code just
> throws the packets at the Ethernet device and considers them 'gone',
> which is why it's hitting the ATM limits all the time. The patch you
> highlight is changing the behaviour in a case that should never *happen*
> with PPP. It's suffering massive queue bloat if it's filling the ATM
> queue, and we should fix *that*.
Agreed, the issue is the PPP layer. I've seen this issue with PPPoE
before, haven't had the itch, time or interest to fix it though. A
workaround to help mitigate the issue may be to increase the TX queue
length of the br2684 interface, and the atm device if possible.
You'll pay the price of buffer bloat and latency.
--
Karl
^ permalink raw reply
* [PATCH] bnx2x: fix panic when TX ring is full
From: Eric Dumazet @ 2012-06-13 19:45 UTC (permalink / raw)
To: David Miller
Cc: netdev, Tom Herbert, Robert Evans, Eilon Greenstein, Merav Sicron,
Yaniv Rosner, Willem de Bruijn, Tomas Hruby
From: Eric Dumazet <edumazet@google.com>
There is a off by one error in the minimal number of BD in
bnx2x_start_xmit() and bnx2x_tx_int() before stopping/resuming tx queue.
A full size GSO packet, with data included in skb->head really needs
(MAX_SKB_FRAGS + 4) BDs, because of bnx2x_tx_split()
This error triggers if BQL is disabled and heavy TCP transmit traffic
occurs.
bnx2x_tx_split() definitely can be called, remove a wrong comment.
Reported-by: Tomas Hruby <thruby@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Yaniv Rosner <yanivr@broadcom.com>
Cc: Merav Sicron <meravs@broadcom.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Robert Evans <evansr@google.com>
Cc: Willem de Bruijn <willemb@google.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index ad0743b..302765a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -190,7 +190,7 @@ int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata)
if ((netif_tx_queue_stopped(txq)) &&
(bp->state == BNX2X_STATE_OPEN) &&
- (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+ (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4))
netif_tx_wake_queue(txq);
__netif_tx_unlock(txq);
@@ -2501,8 +2501,6 @@ int bnx2x_poll(struct napi_struct *napi, int budget)
/* we split the first BD into headers and data BDs
* to ease the pain of our fellow microcode engineers
* we use one mapping for both BDs
- * So far this has only been observed to happen
- * in Other Operating Systems(TM)
*/
static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
struct bnx2x_fp_txdata *txdata,
@@ -3156,7 +3154,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
txdata->tx_bd_prod += nbd;
- if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+ if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) {
netif_tx_stop_queue(txq);
/* paired memory barrier is in bnx2x_tx_int(), we have to keep
@@ -3165,7 +3163,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
smp_mb();
fp->eth_q_stats.driver_xoff++;
- if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+ if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)
netif_tx_wake_queue(txq);
}
txdata->tx_pkt++;
^ permalink raw reply related
* Re: [net-next patch 3/12] bnx2x: Add support for 4-tupple UDP RSS
From: Ben Hutchings @ 2012-06-13 18:20 UTC (permalink / raw)
To: Merav Sicron; +Cc: eilong, davem, netdev
In-Reply-To: <1339591464-10554-4-git-send-email-meravs@broadcom.com>
On Wed, 2012-06-13 at 15:44 +0300, Merav Sicron wrote:
> This change enables to control via ethtool whether to do UDP RSS on 2-tupple
> (IP source / destination only) or on 4-tupple (include UDP source / destination
> port). It also enables to read back the RSS configuration.
[...]
> --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
> +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
> @@ -2600,6 +2600,52 @@ static int bnx2x_set_phys_id(struct net_device *dev,
> return 0;
> }
>
> +static int bnx2x_get_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info)
> +{
> +
> + switch (info->flow_type) {
> + case TCP_V4_FLOW:
> + case TCP_V6_FLOW:
> + info->data = RXH_IP_SRC | RXH_IP_DST |
> + RXH_L4_B_0_1 | RXH_L4_B_2_3;
> + break;
> + case UDP_V4_FLOW:
> + if (bp->rss_conf_obj.udp_rss_v4)
> + info->data = RXH_IP_SRC | RXH_IP_DST |
> + RXH_L4_B_0_1 | RXH_L4_B_2_3;
> + else
> + info->data = RXH_IP_SRC | RXH_IP_DST;
> + break;
> + case UDP_V6_FLOW:
> + if (bp->rss_conf_obj.udp_rss_v6)
> + info->data = RXH_IP_SRC | RXH_IP_DST |
> + RXH_L4_B_0_1 | RXH_L4_B_2_3;
> + else
> + info->data = RXH_IP_SRC | RXH_IP_DST;
> + break;
> + case IPV4_FLOW:
> + case IPV6_FLOW:
> + info->data = RXH_IP_SRC | RXH_IP_DST;
> + break;
> + case SCTP_V4_FLOW:
> + case AH_ESP_V4_FLOW:
> + case AH_V4_FLOW:
> + case ESP_V4_FLOW:
> + case SCTP_V6_FLOW:
> + case AH_ESP_V6_FLOW:
> + case AH_V6_FLOW:
> + case ESP_V6_FLOW:
> + case IP_USER_FLOW:
> + case ETHER_FLOW:
> + info->data = 0;
> + break;
> + default:
> + return -EINVAL;
> + }
[...]
Don't try to enumerate all flow types; we may add others in future. You
should set info->data = 0 for any type for which RSS is not supported.
Otherwise I think the ethtool bits are fine.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: [net-next patch 1/12] bnx2x: Add support for external LB
From: Ben Hutchings @ 2012-06-13 18:17 UTC (permalink / raw)
To: Merav Sicron; +Cc: eilong, davem, netdev
In-Reply-To: <1339591464-10554-2-git-send-email-meravs@broadcom.com>
On Wed, 2012-06-13 at 15:44 +0300, Merav Sicron wrote:
> This change enables to do self-test with external loopback via ethtool.
>
> Signed-off-by: Merav Sicron <meravs@broadcom.com>
> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
The ethtool bits look right.
[...]
> --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
> +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
> @@ -2124,7 +2124,12 @@ u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
> }
> }
>
> - rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
> + if (load_mode == LOAD_LOOPBACK_EXT) {
> + struct link_params *lp = &bp->link_params;
> + lp->loopback_mode = LOOPBACK_EXT;
> + }
> +
> + rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
>
> bnx2x_release_phy_lock(bp);
Indentation is wrong here, though.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: PPPoE performance regression
From: David Woodhouse @ 2012-06-13 17:43 UTC (permalink / raw)
To: Benjamin LaHaise
Cc: Nathan Williams, Karl Hiramoto, David S. Miller, netdev,
Paul Mackerras, John Crispin
In-Reply-To: <20120613172122.GF2361@kvack.org>
[-- Attachment #1: Type: text/plain, Size: 1193 bytes --]
On Wed, 2012-06-13 at 13:21 -0400, Benjamin LaHaise wrote:
> On the whole question of PPPoE over intermediate ethernet links to ADSL
> modems, I think it would be possible to limit latency by implementing a
> sliding window clocked using LCP ECHO requests. Does this sound worthwhile
> implementing?
Maybe, for someone who actually cares about those who are using separate
ADSL modems, and doesn't think they should just better hardware if they
care about the performance and queue management :)
> What sort of queue depths are you looking at for the ATM devices
> you're working on?
We're managing the queue to keep it short. On the PPPoATM side, we (now)
strictly limit the number of packets between the ppp_generic code and
the ATM device. It's basically one in-flight and one waiting to be
handed to the device in the TX done interrupt. PPP is designed to feed
new packets with low latency, after all.
The Solos ADSL device *used* to eat as many packets as it had internal
RAM to store them in, acknowledging the "transmit" as soon as it had
buffered them. I got Nathan to fix that some time ago, and the internal
queue is fairly short now.
--
dwmw2
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 6171 bytes --]
^ permalink raw reply
* Re: PPPoE performance regression
From: Benjamin LaHaise @ 2012-06-13 17:21 UTC (permalink / raw)
To: David Woodhouse
Cc: Nathan Williams, Karl Hiramoto, David S. Miller, netdev,
Paul Mackerras, John Crispin
In-Reply-To: <1339606383.14785.14.camel@shinybook.infradead.org>
On Wed, Jun 13, 2012 at 05:53:03PM +0100, David Woodhouse wrote:
> I'm looking at the class of device on which OpenWRT runs. Linux is *on*
> the router with the ADSL port, not connected to it via Ethernet.
Ah, yes, that's a worthwhile pursuit.
> And even if it *were* rare... this is the case that *should* work best,
> where we have complete control of the hardware. There's no excuse for
> the behaviour that we currently see with PPPoE on BR2684.
*nod*
> I think that's largely true of BQL in general, isn't it? That's OK; it's
> a config option. I suspect if I make this accounting of PPPoE / L2TP
> packets conditional on BQL (or perhaps on a separate config option
> PPP_BQL) that ought to address your concern about the cases where you
> don't need it?
That would help.
On the whole question of PPPoE over intermediate ethernet links to ADSL
modems, I think it would be possible to limit latency by implementing a
sliding window clocked using LCP ECHO requests. Does this sound worthwhile
implementing? What sort of queue depths are you looking at for the ATM
devices you're working on?
-ben
--
"Thought is the essence of where you are now."
^ permalink raw reply
* RE: [net-next 1/9] igb: Add support functions to access thermal data.
From: Wyborny, Carolyn @ 2012-06-13 17:15 UTC (permalink / raw)
To: Ben Hutchings
Cc: Kirsher, Jeffrey T, davem@davemloft.net, netdev@vger.kernel.org,
gospo@redhat.com, sassmann@redhat.com
In-Reply-To: <1339607189.2612.8.camel@bwh-desktop.uk.solarflarecom.com>
>-----Original Message-----
>From: Ben Hutchings [mailto:bhutchings@solarflare.com]
>Sent: Wednesday, June 13, 2012 10:06 AM
>To: Wyborny, Carolyn
>Cc: Kirsher, Jeffrey T; davem@davemloft.net; netdev@vger.kernel.org;
>gospo@redhat.com; sassmann@redhat.com
>Subject: RE: [net-next 1/9] igb: Add support functions to access thermal
>data.
>
>On Wed, 2012-06-13 at 14:53 +0000, Wyborny, Carolyn wrote:
>> >-----Original Message-----
>> >From: Ben Hutchings [mailto:bhutchings@solarflare.com]
>> >Sent: Saturday, June 09, 2012 5:49 PM
>> >To: Kirsher, Jeffrey T
>> >Cc: davem@davemloft.net; Wyborny, Carolyn; netdev@vger.kernel.org;
>> >gospo@redhat.com; sassmann@redhat.com
>> >Subject: Re: [net-next 1/9] igb: Add support functions to access
>thermal
>> >data.
>> >
>> >On Sat, 2012-06-09 at 01:20 -0700, Jeff Kirsher wrote:
>> >> From: Carolyn Wyborny <carolyn.wyborny@intel.com>
>> >>
>> >> Some i350 devices contain thermal data that we can get to via an
>i2c
>> >> interface. These functions provide support to get at that data. A
>> >> following patch will export this data.
>> >[...]
>> >
>> >We already have an I2C subsystem - so don't replicate i2c-algo-bit
>etc.
>> >
>> >It's possible we also have an hwmon driver for whatever temperature
>> >sensor is on these boards, which you can then probe by calling
>> >i2c_new_device().
>>
>> I am not sure that our sensors will be compatible, but I will research
>> it to be sure. I will also take a look at what we can do with the i2c
>> interface that already exists and make sure we are not duplicating any
>> of it.
>
>The patch you posted duplicates i2c-algo-bit. The sfc driver initially
>did this too, but I was rightly required to fix that. So if you want an
>example, you could do worse than looking for references to 'i2c' in
>drivers/net/ethernet/sfc/falcon.c and
>drivers/net/ethernet/sfc/falcon_boards.c.
Thanks Ben, appreciate the pointer. I'll start there.
Carolyn
Carolyn Wyborny
Linux Development
LAN Access Division
Intel Corporation
^ permalink raw reply
* RE: [net-next 1/9] igb: Add support functions to access thermal data.
From: Ben Hutchings @ 2012-06-13 17:06 UTC (permalink / raw)
To: Wyborny, Carolyn
Cc: Kirsher, Jeffrey T, davem@davemloft.net, netdev@vger.kernel.org,
gospo@redhat.com, sassmann@redhat.com
In-Reply-To: <9BBC4E0CF881AA4299206E2E1412B626274A6F4B@ORSMSX102.amr.corp.intel.com>
On Wed, 2012-06-13 at 14:53 +0000, Wyborny, Carolyn wrote:
> >-----Original Message-----
> >From: Ben Hutchings [mailto:bhutchings@solarflare.com]
> >Sent: Saturday, June 09, 2012 5:49 PM
> >To: Kirsher, Jeffrey T
> >Cc: davem@davemloft.net; Wyborny, Carolyn; netdev@vger.kernel.org;
> >gospo@redhat.com; sassmann@redhat.com
> >Subject: Re: [net-next 1/9] igb: Add support functions to access thermal
> >data.
> >
> >On Sat, 2012-06-09 at 01:20 -0700, Jeff Kirsher wrote:
> >> From: Carolyn Wyborny <carolyn.wyborny@intel.com>
> >>
> >> Some i350 devices contain thermal data that we can get to via an i2c
> >> interface. These functions provide support to get at that data. A
> >> following patch will export this data.
> >[...]
> >
> >We already have an I2C subsystem - so don't replicate i2c-algo-bit etc.
> >
> >It's possible we also have an hwmon driver for whatever temperature
> >sensor is on these boards, which you can then probe by calling
> >i2c_new_device().
>
> I am not sure that our sensors will be compatible, but I will research
> it to be sure. I will also take a look at what we can do with the i2c
> interface that already exists and make sure we are not duplicating any
> of it.
The patch you posted duplicates i2c-algo-bit. The sfc driver initially
did this too, but I was rightly required to fix that. So if you want an
example, you could do worse than looking for references to 'i2c' in
drivers/net/ethernet/sfc/falcon.c and
drivers/net/ethernet/sfc/falcon_boards.c.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: PPPoE performance regression
From: David Woodhouse @ 2012-06-13 16:59 UTC (permalink / raw)
To: David Laight
Cc: Benjamin LaHaise, Nathan Williams, Karl Hiramoto, David S. Miller,
netdev, Paul Mackerras, John Crispin
In-Reply-To: <AE90C24D6B3A694183C094C60CF0A2F6026B6F47@saturn3.aculab.com>
[-- Attachment #1: Type: text/plain, Size: 932 bytes --]
On Wed, 2012-06-13 at 17:32 +0100, David Laight wrote:
> > I would contend that PPPoE over br2684 is not the common case. The vast
> > majority of users in client mode are going to be using PPPoE over an
> > ethernet link to a DSL modem (or cable or wireless radios even). Just look
> > at what DSL modems are available for users in computer stores / what ISPs
> > actually ship to their users. Real ATM exposing devices are rare.
>
> PPPoA is common in the UK.
In the UK you tend to have the option of using PPPoA *or* PPPoE over
BR2684. The ISP's kit will handle both.
Ben's comment was about the *hardware*, though. If your "ADSL modem" is
a separate box which just bridges Ethernet to BR2684 on the ADSL link,
you're limited to using the PPPoE protocol over that.
Obviously, if you have a proper ADSL *router* and it's not just a PPP
bridge, then you can — and should — use PPPoA.
--
dwmw2
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 6171 bytes --]
^ permalink raw reply
* Re: PPPoE performance regression
From: David Woodhouse @ 2012-06-13 16:53 UTC (permalink / raw)
To: Benjamin LaHaise
Cc: Nathan Williams, Karl Hiramoto, David S. Miller, netdev,
Paul Mackerras, John Crispin
In-Reply-To: <20120613163108.GE2361@kvack.org>
[-- Attachment #1: Type: text/plain, Size: 2130 bytes --]
On Wed, 2012-06-13 at 12:31 -0400, Benjamin LaHaise wrote:
> I would contend that PPPoE over br2684 is not the common case. The vast
> majority of users in client mode are going to be using PPPoE over an
> ethernet link to a DSL modem (or cable or wireless radios even). Just look
> at what DSL modems are available for users in computer stores / what ISPs
> actually ship to their users. Real ATM exposing devices are rare.
I'm looking at the class of device on which OpenWRT runs. Linux is *on*
the router with the ADSL port, not connected to it via Ethernet.
I can buy lots of these in the shop. Anything that's an ADSL *router*
rather than *modem* is likely to be running, or at least capable of
running, Linux.
Admittedly, if you have access to the native ADSL interface then you'd
do a lot better to run PPPoA — but I already fixed this issue for PPPoA.
There are people in some parts of the world who are using PPPoEoA and
putting up with the resulting MTU issues because the *ISP* doesn't
support proper PPPoA.
And even if it *were* rare... this is the case that *should* work best,
where we have complete control of the hardware. There's no excuse for
the behaviour that we currently see with PPPoE on BR2684.
> > On the ISP side if the skb ends up sitting on a receive queue of a user
> > socket, and nothing is servicing that socket, surely the transmits on
> > this channel weren't happening anyway?
>
> True, but it's a design issue we've had to contend with elsewhere in the
> various tunnelling protocols.
>
> Don't get me wrong: I am very much in favour of intelligent queue
> management, but this approach simply does not work for the vast majority
> of PPPoE users, while it adds overhead that will negatively impact access
> concentrators.
I think that's largely true of BQL in general, isn't it? That's OK; it's
a config option. I suspect if I make this accounting of PPPoE / L2TP
packets conditional on BQL (or perhaps on a separate config option
PPP_BQL) that ought to address your concern about the cases where you
don't need it?
--
dwmw2
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 6171 bytes --]
^ permalink raw reply
* RE: PPPoE performance regression
From: David Laight @ 2012-06-13 16:32 UTC (permalink / raw)
To: Benjamin LaHaise, David Woodhouse
Cc: Nathan Williams, Karl Hiramoto, David S. Miller, netdev,
Paul Mackerras, John Crispin
In-Reply-To: <20120613163108.GE2361@kvack.org>
> I would contend that PPPoE over br2684 is not the common case. The
vast
> majority of users in client mode are going to be using PPPoE over an
> ethernet link to a DSL modem (or cable or wireless radios even). Just
look
> at what DSL modems are available for users in computer stores / what
ISPs
> actually ship to their users. Real ATM exposing devices are rare.
PPPoA is common in the UK.
David
^ permalink raw reply
* Re: PPPoE performance regression
From: Benjamin LaHaise @ 2012-06-13 16:31 UTC (permalink / raw)
To: David Woodhouse
Cc: Nathan Williams, Karl Hiramoto, David S. Miller, netdev,
Paul Mackerras, John Crispin
In-Reply-To: <1339603894.14785.5.camel@shinybook.infradead.org>
On Wed, Jun 13, 2012 at 05:11:34PM +0100, David Woodhouse wrote:
> On Wed, 2012-06-13 at 11:55 -0400, Benjamin LaHaise wrote:
> > Does this actually work? Could the skb not end up sitting on the
> > receive queue of a user socket indefinitely, deferring all further
> > transmits? From an ISP point of view,
>
> I haven't tried it; only compiled it. Certainly, the similar approach in
> PPPoATM in commit 9d02daf7 *does* work for limiting the bufferbloat and
> keeping the queues under control. And it'll let me do BQL for PPPoA.
>
> I'm looking at this from the client side, not the ISP side. And in that
> case the local interface *is* the bottleneck. When it's a PPPoE over
> br2684 interface and it's full, we should stop the PPP netdev from
> spewing packets at it, rather than just dropping them.
I would contend that PPPoE over br2684 is not the common case. The vast
majority of users in client mode are going to be using PPPoE over an
ethernet link to a DSL modem (or cable or wireless radios even). Just look
at what DSL modems are available for users in computer stores / what ISPs
actually ship to their users. Real ATM exposing devices are rare.
> On the ISP side if the skb ends up sitting on a receive queue of a user
> socket, and nothing is servicing that socket, surely the transmits on
> this channel weren't happening anyway?
True, but it's a design issue we've had to contend with elsewhere in the
various tunnelling protocols.
Don't get me wrong: I am very much in favour of intelligent queue
management, but this approach simply does not work for the vast majority
of PPPoE users, while it adds overhead that will negatively impact access
concentrators. If you can somehow restrict the overhead to only impacting
your use-case, that would be an improvement.
-ben
--
"Thought is the essence of where you are now."
^ permalink raw reply
* Re: PPPoE performance regression
From: David Woodhouse @ 2012-06-13 16:11 UTC (permalink / raw)
To: Benjamin LaHaise
Cc: Nathan Williams, Karl Hiramoto, David S. Miller, netdev,
Paul Mackerras, John Crispin
In-Reply-To: <20120613155541.GD2361@kvack.org>
[-- Attachment #1: Type: text/plain, Size: 931 bytes --]
On Wed, 2012-06-13 at 11:55 -0400, Benjamin LaHaise wrote:
> Does this actually work? Could the skb not end up sitting on the
> receive queue of a user socket indefinitely, deferring all further
> transmits? From an ISP point of view,
I haven't tried it; only compiled it. Certainly, the similar approach in
PPPoATM in commit 9d02daf7 *does* work for limiting the bufferbloat and
keeping the queues under control. And it'll let me do BQL for PPPoA.
I'm looking at this from the client side, not the ISP side. And in that
case the local interface *is* the bottleneck. When it's a PPPoE over
br2684 interface and it's full, we should stop the PPP netdev from
spewing packets at it, rather than just dropping them.
On the ISP side if the skb ends up sitting on a receive queue of a user
socket, and nothing is servicing that socket, surely the transmits on
this channel weren't happening anyway?
--
dwmw2
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 6171 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox