* Re: [RFC PATCH 0/5] net: socket bind to file descriptor introduced
From: J. Bruce Fields @ 2012-09-04 19:00 UTC (permalink / raw)
To: Stanislav Kinsbursky
Cc: Eric W. Biederman, tglx@linutronix.de, mingo@redhat.com,
davem@davemloft.net, hpa@zytor.com,
thierry.reding@avionic-design.de, bfields@redhat.com,
eric.dumazet@gmail.com, Pavel Emelianov, neilb@suse.de,
netdev@vger.kernel.org, x86@kernel.org,
linux-kernel@vger.kernel.org, paul.gortmaker@windriver.com,
viro@zeniv.linux.org.uk, gorcunov@openvz.org,
akpm@linux-foundation.org, tim.c.chen@linux.intel.com,
"devel@ope
In-Reply-To: <50320EE5.10307@parallels.com>
On Mon, Aug 20, 2012 at 02:18:13PM +0400, Stanislav Kinsbursky wrote:
> 16.08.2012 07:03, Eric W. Biederman пишет:
> >Stanislav Kinsbursky <skinsbursky@parallels.com> writes:
> >
> >>This patch set introduces new socket operation and new system call:
> >>sys_fbind(), which allows to bind socket to opened file.
> >>File to bind to can be created by sys_mknod(S_IFSOCK) and opened by
> >>open(O_PATH).
> >>
> >>This system call is especially required for UNIX sockets, which has name
> >>lenght limitation.
> >>
> >>The following series implements...
> >
> >Hmm. I just realized this patchset is even sillier than I thought.
> >
> >Stanislav is the problem you are ultimately trying to solve nfs clients
> >in a container connecting to the wrong user space rpciod?
> >
>
> Hi, Eric.
> The problem you mentioned was the reason why I started to think about this.
> But currently I believe, that limitations in unix sockets connect or
> bind should be removed, because it will be useful it least for CRIU
> project.
>
> >Aka net/sunrpc/xprtsock.c:xs_setup_local only taking an absolute path
> >and then creating a delayed work item to actually open the unix domain
> >socket?
> >
> >The straight correct and straight forward thing to do appears to be:
> >- Capture the root from current->fs in xs_setup_local.
> >- In xs_local_finish_connect change current->fs.root to the captured
> > version of root before kernel_connect, and restore current->fs.root
> > after kernel_connect.
> >
> >It might not be a bad idea to implement open on unix domain sockets in
> >a filesystem as create(AF_LOCAL)+connect() which would allow you to
> >replace __sock_create + kernel_connect with a simple file_open_root.
> >
>
> I like the idea of introducing new family (AF_LOCAL_AT for example)
> and new sockaddr for connecting or binding from specified root. The
> only thing I'm worrying is passing file descriptor to unix bind or
> connect routine. Because this approach doesn't provide easy way to
> use such family and sockaddr in kernel (like in NFS example).
>
> >But I think the simple scheme of:
> >struct path old_root;
> >old_root = current->fs.root;
> >kernel_connect(...);
> >current->fs.root = old_root;
> >
> >Is more than sufficient and will remove the need for anything
> >except a purely local change to get nfs clients to connect from
> >containers.
> >
>
> That was my first idea.
So is this what you're planning on doing now?
> And probably it would be worth to change all
> fs_struct to support sockets with relative path.
> What do you think about it?
I didn't understand the question. Are you suggesting that changes to
fs_struct would be required to make this work? I don't see why.
--b.
^ permalink raw reply
* Re: [PATCH V2 09/12] net/eipoib: Add main driver functionality
From: Or Gerlitz @ 2012-09-04 18:57 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Eric W. Biederman, Or Gerlitz, davem, roland, netdev, sean.hefty,
Erez Shitrit, Ali Ayoub, Doug Ledford
In-Reply-To: <20120903212230.GA6795@redhat.com>
On Tue, Sep 4, 2012 at 12:22 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> On Mon, Sep 03, 2012 at 11:53:56PM +0300, Or Gerlitz wrote:
>> Michael S. Tsirkin <mst@redhat.com> wrote:
>> > [...] so it seems that a sane solution would involve an extra level of
>> > indirection, with guest addresses being translated to host IB addresses.
>> > As long as you do this, maybe using an ethernet frame format makes sense.
>>
>> > So far the things that make sense. Here are some that don't, to me:
>>
>> > - Is a pdf presentation all you have in terms of documentation?
>> > We are talking communication protocols here - I would expect a
>> > proper spec, and some effort to standardize, otherwise where's the
>> > guarantee it won't change in an incompatible way?
>> > Other things that I would expect to be addressed in such a spec is
>> > interaction with other IPoIB features, such as connected
>> > mode, checksum offloading etc, and IB features such as multipath etc.
>> >
>> > - The way you encode LID/QPN in the MAC seems questionable. IIRC there's
>> > more to IB addressing than just the LID. Since everyone on the subnet
>> > need access to this translation, I think it makes sense to store it in
>> > the SM. I think this would also obviate some IPv4 specific hacks in kernel.
>>
>> > - IGMP/MAC snooping in a driver is just too hairy.
>> > As you point out, bridge currently needs the uplink in promisc mode.
>> > I don't think a driver should work around that limitation.
>> > For some setups, it might be interesting to remove the promisc
>> > mode requirement, failing that, I think you could use macvtap passthrough.
>> >
>> > - Currently migration works without host kernel help, would be
>> > preferable to keep it that way.
>> If we rewind to this point, basically, you had few concerns
> I think some other people gave feedback too, you need to address it in
> the patch (as opposed to by mail - even if it's in documentation or
> comments) don't just focus on what I wrote.
The other feedback was:
1. suggesting to introduce new link layer for the para-virtualized
network stack, a direction pointed by Dave and you, for which I
responded that it doesn't address a hard requirement I got, which is
provide service to an arbitrary VM which have any OS and a virtual
Ethernet NIC on, emulated or para-virtualized.
2. Suggestions to use solutions which involve routing and/or
proxt-arp, for which I responded that in most/practical cases this
will require for the host to know the VM IP, something which isn't
valid assumption in many cases AND that bunch of cloud stacks,
specifically the leading ones, don't even support that option, which
also violates a hard requirement we got, to support these stacks which
are in use by customers.
3. Suggestions to invent EoIB -- I said, OK but this is long termish
process that we're looking on, might be around at some future point,
but still we are required to support whole echo systems which use
IPoIB, and there's no point to "route" between EoIB segment to IPoIB
segments, its back to #2 which we didn't accept
4. Other feedback saying the eIPoIB driver is messy and "we don't like
it" -- hard to exactly address in code changes
----> all in all, we were suggested few directions which don't allow
us to address the problem statement, so there's no way to change the
code so they are fullfilled, and some not concrete comments which are
also hard to address --> we took the route of design changes along
your **concrete** comments, doesn't it make sense?
Or.
^ permalink raw reply
* Re: [PATCH V2 09/12] net/eipoib: Add main driver functionality
From: Or Gerlitz @ 2012-09-04 18:50 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Eric W. Biederman, Or Gerlitz, davem, roland, netdev, sean.hefty,
Erez Shitrit, Ali Ayoub, Doug Ledford
In-Reply-To: <20120903212230.GA6795@redhat.com>
On Tue, Sep 4, 2012 at 12:22 AM, Michael S. Tsirkin <mst@redhat.com> wrote:
> On Mon, Sep 03, 2012 at 11:53:56PM +0300, Or Gerlitz wrote:
>> So we are remained with #3 - the ARPs -- thinking on this a little
>> further, FWIW there --are-- components in the kernel which
>> mangle/generate ARPs and are exposing netdevice, such as openvswitch, anyway:
>> does it make sense to forward ARPs received into / sent over the
>> eIPoIB netdevice (e.g using some sort of rule) to some outer entity
>> such as user-space daemon for interception and later re-injection into eIPoIB?
> Well if this is all you want to do, you can bind a packet socket to the
> interface, and drop them at the nic. It is harder to do for incoming
> ARP requests though.
> I would do something else: send ARPs out to some defined IB address.
> This could be local host or queries from some SA property. Said remote
> side could send you the responses in ethernet format so you do not need
> to mangle responses at all. Similarly for incoming ARP requests.
> The rule to do this can also just redirect non IP packets - this is IPoIB after all.
Thanks for the heads up on the possible implementation route, will
look into that.
>> Documentation we will fix,
> And just to stress the point, document the limitations as well.
sure, not that I see concrete limitations for the **user** at this point, but
if there are such, will put them clearly written.
Or.
^ permalink raw reply
* Re: [PATCH v7 1/1] ieee802154: MRF24J40 driver
From: David Miller @ 2012-09-04 18:46 UTC (permalink / raw)
To: alan
Cc: alex.bluesman.smirnov, dbaryshkov, tony.cheneau,
linux-zigbee-devel, netdev, linux-kernel
In-Reply-To: <1346636653-28903-2-git-send-email-alan@signal11.us>
From: Alan Ott <alan@signal11.us>
Date: Sun, 2 Sep 2012 21:44:13 -0400
> Driver for the Microchip MRF24J40 802.15.4 WPAN module.
>
> Signed-off-by: Alan Ott <alan@signal11.us>
Applied to net-next, thanks.
^ permalink raw reply
* Re: [PATCH iproute2 2/2] iplink: added support for ipoib rtnl link ops
From: Or Gerlitz @ 2012-09-04 18:35 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: Or Gerlitz, davem, roland, netdev
In-Reply-To: <20120904104841.3e9f848b@nehalam.linuxnetplumber.net>
On Tue, Sep 4, 2012 at 8:48 PM, Stephen Hemminger <shemminger@vyatta.com> wrote:
> This is a good way to manage the child devices.
> But I am holding off merging it into iproute2 until after the
> kernel parts are final (in Linus's tree). Please resubmit
> after the kernel parts are merged.
sure,
Or.
^ permalink raw reply
* Re: [PATCH 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit
From: Andrew Lunn @ 2012-09-04 18:31 UTC (permalink / raw)
To: Thomas Petazzoni
Cc: Lior Amsalem, Andrew Lunn, Ike Pan, Nadav Haklai, Ian Molton,
Lennert Buytenhek, David Marlin, Rami Rosen, Yehuda Yitschak,
Jani Monoses, Tawfik Bayouk, Dan Frazier, Eran Ben-Avi, Li Li,
Leif Lindholm, Sebastian Hesselbarth, Jason Cooper, Arnd Bergmann,
Jon Masters, Ben Dooks, Gregory Clement, linux-arm-kernel,
Chris Van Hoof, Nicolas Pitre <n
In-Reply-To: <20120904175610.2c2934f1@skate>
> > I think we normally put the phy into a separate device node on an
> > mdio bus and then use the of_phy_* functions to connect it to
> > the ethernet device.
>
> Even though it may not be a convincing argument, none of the existing DT
> files in arch/arm/boot/dts seem to instantiate a separate PHY device
> and a proper MDIO bus. However, the PowerPC platforms indeed make this
> distinction a lot clearer.
>
> However, this network unit has a clever MAC that autonomously queries
> the PHY for the link status, and reports changes (link, duplex, speed)
> in the form of MAC interrupts and MAC registers. Therefore, for basic
> operation, there is no need for a separate PHY driver nor to expose the
> MDIO bus in any way. The only thing needed is the PHY address, which is
> filled into a register of the MAC so that it can start its automatic
> query of the PHY.
Hi Thomas
I've used Marvell switch chipsets, which have a phy polling unit,
PPU. This sounds very similar. You can do a lot with the PPU, but when
you want to configure subsets of auto-negotiation rates/duplex modes,
or fixed speeds/duplex modes, the PPU could not do it. You had to
disable the PPU and configure the PHY directly.
I see you have some of the ethtools API calls implemented, but not the
ones needed for auto-neg and rates/duplex mode configurations. Does
the neta PPU support this, or will you need to export the MDIO bus for
these sorts of configuration options?
Thanks
Andrew
^ permalink raw reply
* Re: [PATCH net-next 4/7] openvswitch: Reset upper layer protocol info on internal devices.
From: Chris Wright @ 2012-09-04 18:23 UTC (permalink / raw)
To: Jesse Gross
Cc: dev-yBygre7rU0TnMu66kgdUjQ, netdev-u79uwXL29TY76Z2rM5mHXA,
chrisw-H+wXaHxf7aLQT0dZR+AlfA, David Miller
In-Reply-To: <CAEP_g=_+Q4Axi0vH8nce6zVZgs++62PbiTWum_z+s_PbpwzgOA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
* Jesse Gross (jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org) wrote:
> On Mon, Sep 3, 2012 at 6:00 PM, David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org> wrote:
> > From: Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org>
> > Date: Mon, 3 Sep 2012 17:57:39 -0700
> >
> >> On Fri, Jul 20, 2012 at 3:26 PM, Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org> wrote:
> >>> It's possible that packets that are sent on internal devices (from
> >>> the OVS perspective) have already traversed the local IP stack.
> >>> After they go through the internal device, they will again travel
> >>> through the IP stack which may get confused by the presence of
> >>> existing information in the skb. The problem can be observed
> >>> when switching between namespaces. This clears out that information
> >>> to avoid problems but deliberately leaves other metadata alone.
> >>> This is to provide maximum flexibility in chaining together OVS
> >>> and other Linux components.
> >>>
> >>> Signed-off-by: Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org>
> >>
> >> It was recently discovered that the bug that this patch fixes is
> >> causing problems in the real world. Can you please queue this for
> >> stable in 3.4/3.5? It's currently in Linus's tree as
> >> 7fe99e2d434eafeac0c57b279a77e5de39212636.
> >>
> >
> > What vendor is shipping openvswitch enabled and requires the fix to
> > be in -stable before they'll ship it to customers?
> >
> > That goes into what is 'real world'
>
> Fedora is running into it I believe. Chris Wright asked for it so he
> might be able to elaborate more on their plans.
I've not hit the bug myself, but been made aware of the issue from
OpenStack/Quantum folks.
There's a testing scenario that hits this as described in this launchpad
bug:
https://bugs.launchpad.net/quantum/+bug/1044318
thanks,
-chris
^ permalink raw reply
* Re: [PATCH net-next 4/7] openvswitch: Reset upper layer protocol info on internal devices.
From: David Miller @ 2012-09-04 18:22 UTC (permalink / raw)
To: jesse-l0M0P4e3n4LQT0dZR+AlfA
Cc: dev-yBygre7rU0TnMu66kgdUjQ, netdev-u79uwXL29TY76Z2rM5mHXA,
chrisw-H+wXaHxf7aLQT0dZR+AlfA
In-Reply-To: <CAEP_g=_+Q4Axi0vH8nce6zVZgs++62PbiTWum_z+s_PbpwzgOA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
From: Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org>
Date: Mon, 3 Sep 2012 18:07:29 -0700
> On Mon, Sep 3, 2012 at 6:00 PM, David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org> wrote:
>> From: Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org>
>> Date: Mon, 3 Sep 2012 17:57:39 -0700
>>
>>> On Fri, Jul 20, 2012 at 3:26 PM, Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org> wrote:
>>>> It's possible that packets that are sent on internal devices (from
>>>> the OVS perspective) have already traversed the local IP stack.
>>>> After they go through the internal device, they will again travel
>>>> through the IP stack which may get confused by the presence of
>>>> existing information in the skb. The problem can be observed
>>>> when switching between namespaces. This clears out that information
>>>> to avoid problems but deliberately leaves other metadata alone.
>>>> This is to provide maximum flexibility in chaining together OVS
>>>> and other Linux components.
>>>>
>>>> Signed-off-by: Jesse Gross <jesse-l0M0P4e3n4LQT0dZR+AlfA@public.gmane.org>
>>>
>>> It was recently discovered that the bug that this patch fixes is
>>> causing problems in the real world. Can you please queue this for
>>> stable in 3.4/3.5? It's currently in Linus's tree as
>>> 7fe99e2d434eafeac0c57b279a77e5de39212636.
>>>
>>
>> What vendor is shipping openvswitch enabled and requires the fix to
>> be in -stable before they'll ship it to customers?
>>
>> That goes into what is 'real world'
>
> Fedora is running into it I believe. Chris Wright asked for it so he
> might be able to elaborate more on their plans.
Anyways, I've meanwhile queued it up for -stable, thanks.
^ permalink raw reply
* Re: [PATCH] sctp: use list_move_tail instead of list_del/list_add_tail
From: David Miller @ 2012-09-04 18:16 UTC (permalink / raw)
To: weiyj.lk; +Cc: vyasevich, sri, yongjun_wei, linux-sctp, netdev
In-Reply-To: <CAPgLHd_w3-iAT66PW2i_jYyqmNrF-fKczcUEdBemPMvWX+fbOQ@mail.gmail.com>
From: Wei Yongjun <weiyj.lk@gmail.com>
Date: Tue, 4 Sep 2012 17:58:16 +0800
> From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
>
> Using list_move_tail() instead of list_del() + list_add_tail().
>
> spatch with a semantic match is used to found this problem.
> (http://coccinelle.lip6.fr/)
>
> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Applied to net-next, thank you.
^ permalink raw reply
* Re: [PATCH] xfrm: Workaround incompatibility of ESN and async crypto
From: David Miller @ 2012-09-04 18:10 UTC (permalink / raw)
To: herbert; +Cc: steffen.klassert, netdev
In-Reply-To: <20120904123155.GA3152@gondor.apana.org.au>
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 4 Sep 2012 05:31:55 -0700
> On Tue, Sep 04, 2012 at 12:03:29PM +0200, Steffen Klassert wrote:
>> ESN for esp is defined in RFC 4303. This RFC assumes that the
>> sequence number counters are always up to date. However,
>> this is not true if an async crypto algorithm is employed.
>>
>> If the sequence number counters are not up to date on sequence
>> number check, we may incorrectly update the upper 32 bit of
>> the sequence number. This leads to a DOS.
>>
>> We workaround this by comparing the upper sequence number,
>> (used for authentication) with the upper sequence number
>> computed after the async processing. We drop the packet
>> if these numbers are different.
>>
>> To do this, we introduce a recheck function that does this
>> check in the ESN case.
>>
>> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
>
> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
>
> It took me a while to understand the problem but Steffen was
> correct again as usual.
Applied, thanks everyone.
^ permalink raw reply
* Re: [PATCH] l2tp: fix a lockdep splat
From: David Miller @ 2012-09-04 18:08 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev
In-Reply-To: <1346779137.13121.54.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Tue, 04 Sep 2012 19:18:57 +0200
> From: Eric Dumazet <edumazet@google.com>
>
> Fixes following lockdep splat :
...
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied, thanks Eric.
^ permalink raw reply
* Re: [PATCH] net: don't allow INET to be not configured
From: David Miller @ 2012-09-04 18:07 UTC (permalink / raw)
To: shemminger; +Cc: rdunlap, sfr, linux-next, linux-kernel, netdev
In-Reply-To: <20120904104451.29819808@nehalam.linuxnetplumber.net>
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 4 Sep 2012 10:44:51 -0700
> There is no reason to expose turning off TCP/IP networking.
> If networking is enabled force TCP/IP to enabled. This also
> eliminates the time chasing down errors with bogus configurations
> generated by 'make randconfig'
>
> For testing, it is still possible to edit Kconfig
>
> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
People have legitimate reasons to enable NET without INET, so let's
just fix the dependency bugs as they are reported.
^ permalink raw reply
* Re: Commit "ipconfig wait for carrier" makes boot hang for 2 mins if no carrier
From: Joakim Tjernlund @ 2012-09-04 18:04 UTC (permalink / raw)
To: Micha Nelissen; +Cc: netdev
In-Reply-To: <504627A4.9080306@neli.hopto.org>
-----Micha Nelissen <micha@neli.hopto.org> wrote: -----
>
> Op 2012-09-04 16:41, Joakim Tjernlund schreef: > Above mentioned
> commit(3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c) changes
> a ~1 sec delay to ~120 sec boot delay
> if no carrier. This is a really
> long time to wait if you just want to set an IP address but
> doesn't
> care about NFS root, holds up the boot with 2 minutes.
>
> Why not set the IP address then in your rootfs yourself? Micha
I could ask you the same question, why do you need to have nfs in kernel?
The answer is probably the same, it is much easier to
manage our IP config in one place for our embedded system.
I don't understand why you need 2 minutes timeout for carrier either?
The wait should be conditional on NFS root or not so that non NFS roots
can skip this stage altogether.
Jocke
^ permalink raw reply
* Re: [PATCH iproute2 2/2] iplink: added support for ipoib rtnl link ops
From: Stephen Hemminger @ 2012-09-04 17:48 UTC (permalink / raw)
To: Or Gerlitz; +Cc: davem, roland, netdev
In-Reply-To: <1345724119-32110-3-git-send-email-ogerlitz@mellanox.com>
On Thu, 23 Aug 2012 15:15:19 +0300
Or Gerlitz <ogerlitz@mellanox.com> wrote:
> Added basic support to create/delete IPoIB child devices,
> where the user can optionally specify the IB PKEY (Partition Key)
> to be used by the newly created device. If nothing is provided,
> the child will use the same pkey as the parent.
>
> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
This is a good way to manage the child devices.
But I am holding off merging it into iproute2 until after the
kernel parts are final (in Linus's tree). Please resubmit
after the kernel parts are merged.
^ permalink raw reply
* [PATCH] netfilter: take care of timewait sockets
From: Eric Dumazet @ 2012-09-04 17:49 UTC (permalink / raw)
To: Pablo Neira Ayuso; +Cc: Patrick McHardy, netfilter-devel, netdev
From: Eric Dumazet <edumazet@google.com>
Sami Farin reported crashes in xt_LOG because it assumes skb->sk is a
full blown socket.
But with TCP early demux, we can have skb->sk pointing to a timewait
socket.
Same fix is needed in netfnetlink_log
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
---
net/netfilter/nfnetlink_log.c | 14 +++++++------
net/netfilter/xt_LOG.c | 33 ++++++++++++++++----------------
2 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 14e2f39..5cfb5be 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -381,6 +381,7 @@ __build_packet_message(struct nfulnl_instance *inst,
struct nlmsghdr *nlh;
struct nfgenmsg *nfmsg;
sk_buff_data_t old_tail = inst->skb->tail;
+ struct sock *sk;
nlh = nlmsg_put(inst->skb, 0, 0,
NFNL_SUBSYS_ULOG << 8 | NFULNL_MSG_PACKET,
@@ -499,18 +500,19 @@ __build_packet_message(struct nfulnl_instance *inst,
}
/* UID */
- if (skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file) {
- struct file *file = skb->sk->sk_socket->file;
+ sk = skb->sk;
+ if (sk && sk->sk_state != TCP_TIME_WAIT) {
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file) {
+ struct file *file = sk->sk_socket->file;
__be32 uid = htonl(file->f_cred->fsuid);
__be32 gid = htonl(file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
if (nla_put_be32(inst->skb, NFULA_UID, uid) ||
nla_put_be32(inst->skb, NFULA_GID, gid))
goto nla_put_failure;
} else
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/* local sequence number */
diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c
index ff5f75f..2a4f969 100644
--- a/net/netfilter/xt_LOG.c
+++ b/net/netfilter/xt_LOG.c
@@ -145,6 +145,19 @@ static int dump_tcp_header(struct sbuff *m, const struct sk_buff *skb,
return 0;
}
+static void dump_sk_uid_gid(struct sbuff *m, struct sock *sk)
+{
+ if (!sk || sk->sk_state == TCP_TIME_WAIT)
+ return;
+
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file)
+ sb_add(m, "UID=%u GID=%u ",
+ sk->sk_socket->file->f_cred->fsuid,
+ sk->sk_socket->file->f_cred->fsgid);
+ read_unlock_bh(&sk->sk_callback_lock);
+}
+
/* One level of recursion won't kill us */
static void dump_ipv4_packet(struct sbuff *m,
const struct nf_loginfo *info,
@@ -361,14 +374,8 @@ static void dump_ipv4_packet(struct sbuff *m,
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && !iphoff && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && !iphoff)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!iphoff && skb->mark)
@@ -717,14 +724,8 @@ static void dump_ipv6_packet(struct sbuff *m,
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && recurse && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && recurse)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!recurse && skb->mark)
^ permalink raw reply related
* [PATCH] net: don't allow INET to be not configured
From: Stephen Hemminger @ 2012-09-04 17:44 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Stephen Rothwell, linux-next, LKML, netdev
In-Reply-To: <50463941.9070703@xenotime.net>
There is no reason to expose turning off TCP/IP networking.
If networking is enabled force TCP/IP to enabled. This also
eliminates the time chasing down errors with bogus configurations
generated by 'make randconfig'
For testing, it is still possible to edit Kconfig
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
--- a/net/Kconfig 2012-08-15 08:59:22.910704705 -0700
+++ b/net/Kconfig 2012-09-04 10:39:53.654585718 -0700
@@ -51,26 +51,7 @@ source "net/xfrm/Kconfig"
source "net/iucv/Kconfig"
config INET
- bool "TCP/IP networking"
- ---help---
- These are the protocols used on the Internet and on most local
- Ethernets. It is highly recommended to say Y here (this will enlarge
- your kernel by about 400 KB), since some programs (e.g. the X window
- system) use TCP/IP even if your machine is not connected to any
- other computer. You will get the so-called loopback device which
- allows you to ping yourself (great fun, that!).
-
- For an excellent introduction to Linux networking, please read the
- Linux Networking HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- If you say Y here and also to "/proc file system support" and
- "Sysctl support" below, you can change various aspects of the
- behavior of the TCP/IP code by writing to the (virtual) files in
- /proc/sys/net/ipv4/*; the options are explained in the file
- <file:Documentation/networking/ip-sysctl.txt>.
-
- Short answer: say Y.
+ def_bool y
if INET
source "net/ipv4/Kconfig"
^ permalink raw reply
* [PATCH 4/4] Squelch compiler warning in sk_rmem_schedule()
From: Mel Gorman @ 2012-09-04 17:24 UTC (permalink / raw)
To: Andrew Morton
Cc: Linux-MM, Linux-Netdev, LKML, David Miller, Chuck Lever,
Joonsoo Kim, Pekka, "Enberg <penberg", David Rientjes,
Mel Gorman
In-Reply-To: <1346779479-1097-1-git-send-email-mgorman@suse.de>
From: Chuck Lever <chuck.lever@oracle.com>
In file included from linux/include/linux/tcp.h:227:0,
from linux/include/linux/ipv6.h:221,
from linux/include/net/ipv6.h:16,
from linux/include/linux/sunrpc/clnt.h:26,
from linux/net/sunrpc/stats.c:22:
linux/include/net/sock.h: In function ‘sk_rmem_schedule’:
linux/nfs-2.6/include/net/sock.h:1339:13: warning: comparison between
signed and unsigned integer expressions [-Wsign-compare]
Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) using the
-Wextra option.
[c76562b6: netvm: prevent a stream-specific deadlock] accidentally replaced
the "size" parameter of sk_rmem_schedule() with an unsigned int. This
changes the semantics of the comparison in the return statement.
In sk_wmem_schedule we have syntactically the same comparison, but
"size" is a signed integer. In addition, __sk_mem_schedule() takes
a signed integer for its "size" parameter, so there is an implicit
type conversion in sk_rmem_schedule() anyway.
Revert the "size" parameter back to a signed integer so that the
semantics of the expressions in both sk_[rw]mem_schedule() are
exactly the same.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
include/net/sock.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index 72132ae..adb7da2 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1332,7 +1332,7 @@ static inline bool sk_wmem_schedule(struct sock *sk, int size)
}
static inline bool
-sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, unsigned int size)
+sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, int size)
{
if (!sk_has_account(sk))
return true;
--
1.7.9.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related
* [PATCH 3/4] slub: consider pfmemalloc_match() in get_partial_node()
From: Mel Gorman @ 2012-09-04 17:24 UTC (permalink / raw)
To: Andrew Morton
Cc: Linux-MM, Linux-Netdev, LKML, David Miller, Chuck Lever,
Joonsoo Kim, Pekka, "Enberg <penberg", David Rientjes,
Mel Gorman
In-Reply-To: <1346779479-1097-1-git-send-email-mgorman@suse.de>
From: Joonsoo Kim <js1304@gmail.com>
The function get_partial() is currently not checking pfmemalloc_match()
meaning that it is possible for pfmemalloc pages to leak to non-pfmemalloc
users. This is a problem in the following situation. Assume that there is
a request from normal allocation and there are no objects in the per-cpu
cache and no node-partial slab.
In this case, slab_alloc enters the slow path and new_slab_objects()
is called which may return a PFMEMALLOC page. As the current user is not
allowed to access PFMEMALLOC page, deactivate_slab() is called ([5091b74a:
mm: slub: optimise the SLUB fast path to avoid pfmemalloc checks]) and
returns an object from PFMEMALLOC page.
Next time, when we get another request from normal allocation, slab_alloc()
enters the slow-path and calls new_slab_objects(). In new_slab_objects(),
we call get_partial() and get a partial slab which was just deactivated
but is a pfmemalloc page. We extract one object from it and re-deactivate.
"deactivate -> re-get in get_partial -> re-deactivate" occures repeatedly.
As a result, access to PFMEMALLOC page is not properly restricted and it
can cause a performance degradation due to frequent deactivation.
deactivation frequently.
This patch changes get_partial_node() to take pfmemalloc_match() into
account and prevents the "deactivate -> re-get in get_partial() scenario.
Instead, new_slab() is called.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
mm/slub.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/mm/slub.c b/mm/slub.c
index 8f78e25..2fdd96f9e9 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1524,12 +1524,13 @@ static inline void *acquire_slab(struct kmem_cache *s,
}
static int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain);
+static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags);
/*
* Try to allocate a partial slab from a specific node.
*/
-static void *get_partial_node(struct kmem_cache *s,
- struct kmem_cache_node *n, struct kmem_cache_cpu *c)
+static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n,
+ struct kmem_cache_cpu *c, gfp_t flags)
{
struct page *page, *page2;
void *object = NULL;
@@ -1545,9 +1546,13 @@ static void *get_partial_node(struct kmem_cache *s,
spin_lock(&n->list_lock);
list_for_each_entry_safe(page, page2, &n->partial, lru) {
- void *t = acquire_slab(s, n, page, object == NULL);
+ void *t;
int available;
+ if (!pfmemalloc_match(page, flags))
+ continue;
+
+ t = acquire_slab(s, n, page, object == NULL);
if (!t)
break;
@@ -1614,7 +1619,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags,
if (n && cpuset_zone_allowed_hardwall(zone, flags) &&
n->nr_partial > s->min_partial) {
- object = get_partial_node(s, n, c);
+ object = get_partial_node(s, n, c, flags);
if (object) {
/*
* Return the object even if
@@ -1643,7 +1648,7 @@ static void *get_partial(struct kmem_cache *s, gfp_t flags, int node,
void *object;
int searchnode = (node == NUMA_NO_NODE) ? numa_node_id() : node;
- object = get_partial_node(s, get_node(s, searchnode), c);
+ object = get_partial_node(s, get_node(s, searchnode), c, flags);
if (object || node != NUMA_NO_NODE)
return object;
--
1.7.9.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related
* [PATCH 2/4] slab: fix starting index for finding another object
From: Mel Gorman @ 2012-09-04 17:24 UTC (permalink / raw)
To: Andrew Morton
Cc: Linux-MM, Linux-Netdev, LKML, David Miller, Chuck Lever,
Joonsoo Kim, Pekka, "Enberg <penberg", David Rientjes,
Mel Gorman
In-Reply-To: <1346779479-1097-1-git-send-email-mgorman@suse.de>
From: Joonsoo Kim <js1304@gmail.com>
In array cache, there is a object at index 0, check it.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
mm/slab.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/slab.c b/mm/slab.c
index d34a903..c685475 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -983,7 +983,7 @@ static void *__ac_get_obj(struct kmem_cache *cachep, struct array_cache *ac,
}
/* The caller cannot use PFMEMALLOC objects, find another one */
- for (i = 1; i < ac->avail; i++) {
+ for (i = 0; i < ac->avail; i++) {
/* If a !PFMEMALLOC object is found, swap them */
if (!is_obj_pfmemalloc(ac->entry[i])) {
objp = ac->entry[i];
--
1.7.9.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related
* [PATCH 1/4] slab: do ClearSlabPfmemalloc() for all pages of slab
From: Mel Gorman @ 2012-09-04 17:24 UTC (permalink / raw)
To: Andrew Morton
Cc: Linux-MM, Linux-Netdev, LKML, David Miller, Chuck Lever,
Joonsoo Kim, Pekka, "Enberg <penberg", David Rientjes,
Mel Gorman
In-Reply-To: <1346779479-1097-1-git-send-email-mgorman@suse.de>
Right now, we call ClearSlabPfmemalloc() for first page of slab when we
clear SlabPfmemalloc flag. This is fine for most swap-over-network use
cases as it is expected that order-0 pages are in use. Unfortunately it
is possible that that __ac_put_obj() checks SlabPfmemalloc on a tail page
and while this is harmless, it is sloppy. This patch ensures that the head
page is always used.
This problem was originally identified by Joonsoo Kim.
[js1304@gmail.com: Original implementation and problem identification]
Signed-off-by: Mel Gorman <mgorman@suse.de>
---
mm/slab.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/slab.c b/mm/slab.c
index 811af03..d34a903 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1000,7 +1000,7 @@ static void *__ac_get_obj(struct kmem_cache *cachep, struct array_cache *ac,
l3 = cachep->nodelists[numa_mem_id()];
if (!list_empty(&l3->slabs_free) && force_refill) {
struct slab *slabp = virt_to_slab(objp);
- ClearPageSlabPfmemalloc(virt_to_page(slabp->s_mem));
+ ClearPageSlabPfmemalloc(virt_to_head_page(slabp->s_mem));
clear_obj_pfmemalloc(&objp);
recheck_pfmemalloc_active(cachep, ac);
return objp;
@@ -1032,7 +1032,7 @@ static void *__ac_put_obj(struct kmem_cache *cachep, struct array_cache *ac,
{
if (unlikely(pfmemalloc_active)) {
/* Some pfmemalloc slabs exist, check if this is one */
- struct page *page = virt_to_page(objp);
+ struct page *page = virt_to_head_page(objp);
if (PageSlabPfmemalloc(page))
set_obj_pfmemalloc(&objp);
}
--
1.7.9.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related
* [PATCH 0/4] Small fixes for swap-over-network
From: Mel Gorman @ 2012-09-04 17:24 UTC (permalink / raw)
To: Andrew Morton
Cc: Linux-MM, Linux-Netdev, LKML, David Miller, Chuck Lever,
Joonsoo Kim, Pekka, "Enberg <penberg", David Rientjes,
Mel Gorman
This series is 4 small patches posted by Jonsoo Kim and Chuck Lever with
some minor changes applied. They are not critical but they should be fixed
before 3.6 comes out. I've picked them up and reposted to make sure they
did not get lost.
Ordinarily I would say that 1-3 should go through Pekka's slab tree and
the last patch through David Millers linux-net tree but as they are fairly
minor maybe it would be easier if all 4 went through Andrew's tree at the
same time.
The patches have been tested against 3.6-rc4 and they passed the swap over
NFS and NBD tests.
include/net/sock.h | 2 +-
mm/slab.c | 6 +++---
mm/slub.c | 15 ++++++++++-----
3 files changed, 14 insertions(+), 9 deletions(-)
--
1.7.9.2
^ permalink raw reply
* Re: linux-next: Tree for Sept 4 (netdev)
From: Randy Dunlap @ 2012-09-04 17:24 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, LKML, netdev
In-Reply-To: <20120904171330.f6b0a922a754ba0f3acc123b@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 273 bytes --]
On 09/04/2012 12:13 AM, Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20120824:
>
when CONFIG_INET is not enabled:
net/built-in.o: In function `sock_edemux':
(.text+0x8ea1): undefined reference to `inet_twsk_put'
Full randconfig file is attached.
--
~Randy
[-- Attachment #2: config-inet --]
[-- Type: text/plain, Size: 59507 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.6.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_USER_QS=y
CONFIG_RCU_USER_QS_FORCE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_RCU_USER_QS=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_KVMTOOL_TEST_ENABLE is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=y
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_APEI is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Memory power savings
#
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
CONFIG_RAPIDIO_TSI500=y
#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_BRIDGE_NF_EBTABLES=y
# CONFIG_BRIDGE_EBT_BROUTE is not set
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
# CONFIG_BRIDGE_EBT_ARP is not set
CONFIG_BRIDGE_EBT_IP=y
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
# CONFIG_BRIDGE_EBT_STP is not set
CONFIG_BRIDGE_EBT_VLAN=y
# CONFIG_BRIDGE_EBT_DNAT is not set
CONFIG_BRIDGE_EBT_MARK_T=y
# CONFIG_BRIDGE_EBT_REDIRECT is not set
CONFIG_BRIDGE_EBT_SNAT=y
# CONFIG_BRIDGE_EBT_LOG is not set
CONFIG_BRIDGE_EBT_ULOG=y
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=y
# CONFIG_BT_ATH3K is not set
# CONFIG_BT_WILINK is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=y
# CONFIG_NET_9P_VIRTIO is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
CONFIG_BMP085_SPI=y
# CONFIG_PCH_PHUB is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
#
# Altera FPGA firmware download module
#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
# CONFIG_MEGARAID_MAILBOX is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_HYPERV_STORAGE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=y
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LAN is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_MII=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4VF=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=y
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
CONFIG_IGBVF=y
# CONFIG_IXGB is not set
CONFIG_IXGBEVF=y
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_KSZ884X_PCI=y
CONFIG_FEALNX=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
# CONFIG_NS83820 is not set
# CONFIG_NET_VENDOR_8390 is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=y
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
CONFIG_SMSC9420=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
CONFIG_NIU=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
CONFIG_NET_SB1000=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPPOATM is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_IPHETH=y
CONFIG_WLAN=y
CONFIG_AIRO=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
# CONFIG_USB_ZD1201 is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
# CONFIG_WL_TI is not set
#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
# CONFIG_WAN is not set
# CONFIG_HYPERV_NET is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_DUMMYLL=y
# CONFIG_GIGASET_BASE is not set
# CONFIG_GIGASET_M105 is not set
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=y
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_STMPE=y
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_MFD_HSU=y
# CONFIG_SERIAL_MFD_HSU_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_TTY_PRINTK=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_DESIGNWARE=y
# CONFIG_SPI_DW_PCI is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_TLE62X0=y
# CONFIG_HSI is not set
#
# PPS support
#
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_WM831X=y
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_STMPE=y
#
# STMPE Interface Drivers
#
# CONFIG_STMPE_SPI is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_CS5535=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=y
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ARIZONA is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_RC_DECODERS is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
# CONFIG_IR_WINBOND_CIR is not set
CONFIG_IR_TTUSBIR=y
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=y
CONFIG_USB_M5602=y
# CONFIG_USB_STV06XX is not set
CONFIG_USB_GL860=y
CONFIG_USB_GSPCA_BENQ=y
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
CONFIG_USB_GSPCA_JEILINJ=y
# CONFIG_USB_GSPCA_JL2005BCD is not set
CONFIG_USB_GSPCA_KINECT=y
# CONFIG_USB_GSPCA_KONICA is not set
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
CONFIG_USB_GSPCA_SN9C20X=y
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
CONFIG_USB_GSPCA_STK014=y
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
CONFIG_USB_GSPCA_T613=y
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TV8532 is not set
CONFIG_USB_GSPCA_VC032X=y
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
# CONFIG_USB_PWC_INPUT_EVDEV is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=y
# CONFIG_USB_S2255 is not set
CONFIG_USB_SN9C102=y
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_RADIO_ADAPTERS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
#
# Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=y
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
#
# Sensors used on soc_camera driver
#
#
# Customize TV tuners
#
#
# Customise DVB Frontends
#
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
CONFIG_STUB_POULSBO=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_APPLE=y
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PRIMAX=y
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_TRIGGERS is not set
#
# LED Triggers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=y
# CONFIG_INTEL_IOATDMA is not set
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_STAGING=y
CONFIG_ET131X=y
# CONFIG_SLICOSS is not set
# CONFIG_ECHO is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8712U is not set
CONFIG_RTS_PSTOR=y
# CONFIG_RTS_PSTOR_DEBUG is not set
CONFIG_RTS5139=y
CONFIG_RTS5139_DEBUG=y
# CONFIG_TRANZPORT is not set
# CONFIG_DX_SEP is not set
#
# IIO staging drivers
#
# CONFIG_IIO_ST_HWMON is not set
CONFIG_IIO_SW_RING=y
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
CONFIG_ADIS16203=y
CONFIG_ADIS16204=y
CONFIG_ADIS16209=y
CONFIG_ADIS16220=y
# CONFIG_ADIS16240 is not set
CONFIG_KXSD9=y
CONFIG_LIS3L02DQ=y
CONFIG_LIS3L02DQ_BUF_KFIFO=y
# CONFIG_LIS3L02DQ_BUF_RING_SW is not set
# CONFIG_SCA3000 is not set
#
# Analog to digital converters
#
CONFIG_AD7298=y
# CONFIG_AD7606 is not set
CONFIG_AD7476=y
# CONFIG_AD7887 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7793 is not set
CONFIG_AD7816=y
CONFIG_AD7192=y
# CONFIG_ADT7310 is not set
# CONFIG_AD7280 is not set
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
#
# Capacitance to digital converters
#
#
# Direct Digital Synthesis
#
# CONFIG_AD5930 is not set
CONFIG_AD9832=y
# CONFIG_AD9834 is not set
# CONFIG_AD9850 is not set
CONFIG_AD9852=y
# CONFIG_AD9910 is not set
# CONFIG_AD9951 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y
# CONFIG_ADIS16080 is not set
CONFIG_ADIS16130=y
CONFIG_ADIS16260=y
# CONFIG_ADXRS450 is not set
#
# Network Analyzer, Impedance Converters
#
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
#
# Light sensors
#
#
# Magnetometer sensors
#
#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
CONFIG_ADE7754=y
# CONFIG_ADE7758 is not set
CONFIG_ADE7759=y
# CONFIG_ADE7854 is not set
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
CONFIG_AD2S1200=y
# CONFIG_AD2S1210 is not set
#
# Triggers - standalone
#
CONFIG_IIO_GPIO_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# CONFIG_ZRAM is not set
CONFIG_ZSMALLOC=y
# CONFIG_CRYSTALHD is not set
CONFIG_ACPI_QUICKSTART=y
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_DT3155=y
# CONFIG_DT3155_CCIR is not set
# CONFIG_DT3155_STREAMING is not set
#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_ANDROID_LOGGER=y
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO=y
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
# CONFIG_PHONE is not set
# CONFIG_USB_WPAN_HCD is not set
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_WIMAX_GDM72XX=y
# CONFIG_WIMAX_GDM72XX_QOS is not set
CONFIG_WIMAX_GDM72XX_K_MODE=y
CONFIG_WIMAX_GDM72XX_WIMAX2=y
CONFIG_WIMAX_GDM72XX_USB=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACERHDF=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
CONFIG_HP_ACCEL=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
CONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_IPS=y
CONFIG_IBM_RTL=y
CONFIG_XO15_EBOOK=y
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_INTEL_OAKTRAIL=y
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Analog to digital converters
#
CONFIG_AD7266=y
#
# Amplifiers
#
# CONFIG_AD8366 is not set
#
# Light sensors
#
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5624R_SPI is not set
CONFIG_AD5446=y
CONFIG_AD5504=y
# CONFIG_AD5764 is not set
CONFIG_AD5791=y
CONFIG_AD5686=y
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
# CONFIG_PROVE_RCU_DELAY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_CPU_STALL_INFO=y
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_LKDTM=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES_SPARC64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
CONFIG_DDR=y
^ permalink raw reply
* Re: [PATCH v3 01/17] hashtable: introduce a small and naive hashtable
From: Pedro Alves @ 2012-09-04 17:21 UTC (permalink / raw)
To: Steven Rostedt
Cc: Mathieu Desnoyers, Sasha Levin, Tejun Heo, torvalds, akpm,
linux-kernel, linux-mm, paul.gortmaker, davem, mingo, ebiederm,
aarcange, ericvh, netdev, josh, eric.dumazet, axboe, agk,
dm-devel, neilb, ccaulfie, teigland, Trond.Myklebust, bfields,
fweisbec, jesse, venkat.x.venkatsubra, ejt, snitzer, edumazet,
linux-nfs, dev, rds-devel, lw
In-Reply-To: <1346779027.27919.15.camel@gandalf.local.home>
On 09/04/2012 06:17 PM, Steven Rostedt wrote:
> On Tue, 2012-09-04 at 17:40 +0100, Pedro Alves wrote:
>
>> BTW, you can also go a step further and remove the need to close with double }},
>> with something like:
>>
>> #define do_for_each_ftrace_rec(pg, rec) \
>> for (pg = ftrace_pages_start, rec = &pg->records[pg->index]; \
>> pg && rec == &pg->records[pg->index]; \
>> pg = pg->next) \
>> for (rec = pg->records; rec < &pg->records[pg->index]; rec++)
>>
>
> Yeah, but why bother? It's hidden in a macro, and the extra '{ }' shows
> that this is something "special".
The point of both changes is that there's nothing special in the end
at all. It all just works...
--
Pedro Alves
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply
* [PATCH] l2tp: fix a lockdep splat
From: Eric Dumazet @ 2012-09-04 17:18 UTC (permalink / raw)
To: David Miller; +Cc: netdev
From: Eric Dumazet <edumazet@google.com>
Fixes following lockdep splat :
[ 1614.734896] =============================================
[ 1614.734898] [ INFO: possible recursive locking detected ]
[ 1614.734901] 3.6.0-rc3+ #782 Not tainted
[ 1614.734903] ---------------------------------------------
[ 1614.734905] swapper/11/0 is trying to acquire lock:
[ 1614.734907] (slock-AF_INET){+.-...}, at: [<ffffffffa0209d72>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
[ 1614.734920]
[ 1614.734920] but task is already holding lock:
[ 1614.734922] (slock-AF_INET){+.-...}, at: [<ffffffff815fce23>] tcp_v4_err+0x163/0x6b0
[ 1614.734932]
[ 1614.734932] other info that might help us debug this:
[ 1614.734935] Possible unsafe locking scenario:
[ 1614.734935]
[ 1614.734937] CPU0
[ 1614.734938] ----
[ 1614.734940] lock(slock-AF_INET);
[ 1614.734943] lock(slock-AF_INET);
[ 1614.734946]
[ 1614.734946] *** DEADLOCK ***
[ 1614.734946]
[ 1614.734949] May be due to missing lock nesting notation
[ 1614.734949]
[ 1614.734952] 7 locks held by swapper/11/0:
[ 1614.734954] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff81592801>] __netif_receive_skb+0x251/0xd00
[ 1614.734964] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff815d319c>] ip_local_deliver_finish+0x4c/0x4e0
[ 1614.734972] #2: (rcu_read_lock){.+.+..}, at: [<ffffffff8160d116>] icmp_socket_deliver+0x46/0x230
[ 1614.734982] #3: (slock-AF_INET){+.-...}, at: [<ffffffff815fce23>] tcp_v4_err+0x163/0x6b0
[ 1614.734989] #4: (rcu_read_lock){.+.+..}, at: [<ffffffff815da240>] ip_queue_xmit+0x0/0x680
[ 1614.734997] #5: (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9925>] ip_finish_output+0x135/0x890
[ 1614.735004] #6: (rcu_read_lock_bh){.+....}, at: [<ffffffff81595680>] dev_queue_xmit+0x0/0xe00
[ 1614.735012]
[ 1614.735012] stack backtrace:
[ 1614.735016] Pid: 0, comm: swapper/11 Not tainted 3.6.0-rc3+ #782
[ 1614.735018] Call Trace:
[ 1614.735020] <IRQ> [<ffffffff810a50ac>] __lock_acquire+0x144c/0x1b10
[ 1614.735033] [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0
[ 1614.735037] [<ffffffff810a6762>] ? mark_held_locks+0x82/0x130
[ 1614.735042] [<ffffffff810a5df0>] lock_acquire+0x90/0x200
[ 1614.735047] [<ffffffffa0209d72>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
[ 1614.735051] [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10
[ 1614.735060] [<ffffffff81749b31>] _raw_spin_lock+0x41/0x50
[ 1614.735065] [<ffffffffa0209d72>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
[ 1614.735069] [<ffffffffa0209d72>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
[ 1614.735075] [<ffffffffa014f7f2>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth]
[ 1614.735079] [<ffffffff81595112>] dev_hard_start_xmit+0x502/0xa70
[ 1614.735083] [<ffffffff81594c6e>] ? dev_hard_start_xmit+0x5e/0xa70
[ 1614.735087] [<ffffffff815957c1>] ? dev_queue_xmit+0x141/0xe00
[ 1614.735093] [<ffffffff815b622e>] sch_direct_xmit+0xfe/0x290
[ 1614.735098] [<ffffffff81595865>] dev_queue_xmit+0x1e5/0xe00
[ 1614.735102] [<ffffffff81595680>] ? dev_hard_start_xmit+0xa70/0xa70
[ 1614.735106] [<ffffffff815b4daa>] ? eth_header+0x3a/0xf0
[ 1614.735111] [<ffffffff8161d33e>] ? fib_get_table+0x2e/0x280
[ 1614.735117] [<ffffffff8160a7e2>] arp_xmit+0x22/0x60
[ 1614.735121] [<ffffffff8160a863>] arp_send+0x43/0x50
[ 1614.735125] [<ffffffff8160b82f>] arp_solicit+0x18f/0x450
[ 1614.735132] [<ffffffff8159d9da>] neigh_probe+0x4a/0x70
[ 1614.735137] [<ffffffff815a191a>] __neigh_event_send+0xea/0x300
[ 1614.735141] [<ffffffff815a1c93>] neigh_resolve_output+0x163/0x260
[ 1614.735146] [<ffffffff815d9cf5>] ip_finish_output+0x505/0x890
[ 1614.735150] [<ffffffff815d9925>] ? ip_finish_output+0x135/0x890
[ 1614.735154] [<ffffffff815dae79>] ip_output+0x59/0xf0
[ 1614.735158] [<ffffffff815da1cd>] ip_local_out+0x2d/0xa0
[ 1614.735162] [<ffffffff815da403>] ip_queue_xmit+0x1c3/0x680
[ 1614.735165] [<ffffffff815da240>] ? ip_local_out+0xa0/0xa0
[ 1614.735172] [<ffffffff815f4402>] tcp_transmit_skb+0x402/0xa60
[ 1614.735177] [<ffffffff815f5a11>] tcp_retransmit_skb+0x1a1/0x620
[ 1614.735181] [<ffffffff815f7e93>] tcp_retransmit_timer+0x393/0x960
[ 1614.735185] [<ffffffff815fce23>] ? tcp_v4_err+0x163/0x6b0
[ 1614.735189] [<ffffffff815fd317>] tcp_v4_err+0x657/0x6b0
[ 1614.735194] [<ffffffff8160d116>] ? icmp_socket_deliver+0x46/0x230
[ 1614.735199] [<ffffffff8160d19e>] icmp_socket_deliver+0xce/0x230
[ 1614.735203] [<ffffffff8160d116>] ? icmp_socket_deliver+0x46/0x230
[ 1614.735208] [<ffffffff8160d464>] icmp_unreach+0xe4/0x2c0
[ 1614.735213] [<ffffffff8160e520>] icmp_rcv+0x350/0x4a0
[ 1614.735217] [<ffffffff815d3285>] ip_local_deliver_finish+0x135/0x4e0
[ 1614.735221] [<ffffffff815d319c>] ? ip_local_deliver_finish+0x4c/0x4e0
[ 1614.735225] [<ffffffff815d3ffa>] ip_local_deliver+0x4a/0x90
[ 1614.735229] [<ffffffff815d37b7>] ip_rcv_finish+0x187/0x730
[ 1614.735233] [<ffffffff815d425d>] ip_rcv+0x21d/0x300
[ 1614.735237] [<ffffffff81592a1b>] __netif_receive_skb+0x46b/0xd00
[ 1614.735241] [<ffffffff81592801>] ? __netif_receive_skb+0x251/0xd00
[ 1614.735245] [<ffffffff81593368>] process_backlog+0xb8/0x180
[ 1614.735249] [<ffffffff81593cf9>] net_rx_action+0x159/0x330
[ 1614.735257] [<ffffffff810491f0>] __do_softirq+0xd0/0x3e0
[ 1614.735264] [<ffffffff8109ed24>] ? tick_program_event+0x24/0x30
[ 1614.735270] [<ffffffff8175419c>] call_softirq+0x1c/0x30
[ 1614.735278] [<ffffffff8100425d>] do_softirq+0x8d/0xc0
[ 1614.735282] [<ffffffff8104983e>] irq_exit+0xae/0xe0
[ 1614.735287] [<ffffffff8175494e>] smp_apic_timer_interrupt+0x6e/0x99
[ 1614.735291] [<ffffffff81753a1c>] apic_timer_interrupt+0x6c/0x80
[ 1614.735293] <EOI> [<ffffffff810a14ad>] ? trace_hardirqs_off+0xd/0x10
[ 1614.735306] [<ffffffff81336f85>] ? intel_idle+0xf5/0x150
[ 1614.735310] [<ffffffff81336f7e>] ? intel_idle+0xee/0x150
[ 1614.735317] [<ffffffff814e6ea9>] cpuidle_enter+0x19/0x20
[ 1614.735321] [<ffffffff814e7538>] cpuidle_idle_call+0xa8/0x630
[ 1614.735327] [<ffffffff8100c1ba>] cpu_idle+0x8a/0xe0
[ 1614.735333] [<ffffffff8173762e>] start_secondary+0x220/0x222
Signed-off-by: Eric Dumazet <edumazet@google.com>
---
net/l2tp/l2tp_core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 513cab0..36d1054 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1501,6 +1501,8 @@ out:
return err;
}
+static struct lock_class_key l2tp_socket_class;
+
int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp)
{
struct l2tp_tunnel *tunnel = NULL;
@@ -1605,6 +1607,8 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32
tunnel->old_sk_destruct = sk->sk_destruct;
sk->sk_destruct = &l2tp_tunnel_destruct;
tunnel->sock = sk;
+ lockdep_set_class_and_name(&sk->sk_lock.slock, &l2tp_socket_class, "l2tp_sock");
+
sk->sk_allocation = GFP_ATOMIC;
/* Add tunnel to our list */
^ permalink raw reply related
* Re: [PATCH v3 01/17] hashtable: introduce a small and naive hashtable
From: Steven Rostedt @ 2012-09-04 17:17 UTC (permalink / raw)
To: Pedro Alves
Cc: snitzer-H+wXaHxf7aLQT0dZR+AlfA, neilb-l3A5Bk7waGM,
fweisbec-Re5JQEeQqe8AvxtiuMwx3w,
Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA,
bfields-uC3wQj2KruNg9hUCZPvPmw,
paul.gortmaker-CWA4WttNNZF54TAoqtyWWQ,
dm-devel-H+wXaHxf7aLQT0dZR+AlfA, agk-H+wXaHxf7aLQT0dZR+AlfA,
aarcange-H+wXaHxf7aLQT0dZR+AlfA, rds-devel-N0ozoZBvEnrZJqsBc5GL+g,
eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w,
venkat.x.venkatsubra-QHcLZuEGTsvQT0dZR+AlfA,
ccaulfie-H+wXaHxf7aLQT0dZR+AlfA, mingo-X9Un+BFzKDI,
dev-yBygre7rU0TnMu66kgdUjQ, ericvh-Re5JQEeQqe8AvxtiuMwx3w,
josh-iaAMLnmF4UmaiuxdJuQwMA, lw-BthXqXjhjHXQFUHtdCDX3A,
Mathieu Desnoyers, Sasha Levin, axboe-tSWWG44O7X1aa/9Udqfwiw,
linux-nfs-u79uwXL29TY76Z2rM5mHXA, edumazet-hpIqsD4AKlfQT0dZR+AlfA,
linux-mm-Bw31MaZKKs3YtjvyW6yDsg, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, ejt-H+wXaHxf7aLQT0dZR+AlfA,
ebiederm-aS9lmoZGLiVWk0Htik3J/w, Tejun Heo,
teigland-H+wXaHxf7aLQT0dZR+AlfA,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
davem-fT/PcQaiUtIeIZ0/mPfg9Q
In-Reply-To: <50462EE8.1090903-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Tue, 2012-09-04 at 17:40 +0100, Pedro Alves wrote:
> BTW, you can also go a step further and remove the need to close with double }},
> with something like:
>
> #define do_for_each_ftrace_rec(pg, rec) \
> for (pg = ftrace_pages_start, rec = &pg->records[pg->index]; \
> pg && rec == &pg->records[pg->index]; \
> pg = pg->next) \
> for (rec = pg->records; rec < &pg->records[pg->index]; rec++)
>
Yeah, but why bother? It's hidden in a macro, and the extra '{ }' shows
that this is something "special".
-- Steve
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox