* Re: [PATCH net] bnx2x: Restore a call to config_init
From: David Miller @ 2013-09-06 18:47 UTC (permalink / raw)
To: eilong; +Cc: netdev, davej
In-Reply-To: <1378461302.15758.2.camel@lb-tlvb-eilong.il.broadcom.com>
From: "Eilon Greenstein" <eilong@broadcom.com>
Date: Fri, 6 Sep 2013 12:55:02 +0300
> Commit c0a77ec74f295013d7ba3204dd3ed25fccf83cb4 'bnx2x: Add missing braces in
> bnx2x:bnx2x_link_initialize' identified indentation problem, but resolved it
> by adding braces instead of fixing the indentation. The braces now prevents a
> config_init call in some cases, though it should be called regardless of that
> condition. This patch removes the braces and fix the confusing indentation
> that caused this mess.
>
> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Applied.
^ permalink raw reply
* Re: [PATCH] mlx5: remove unused MLX5_DEBUG param in Kconfig
From: David Miller @ 2013-09-06 18:47 UTC (permalink / raw)
To: michael.opdenacker-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: eli-VPRAkNaXOzVWk0Htik3J/w, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-rdma-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1378468162-3109-1-git-send-email-michael.opdenacker-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
From: Michael Opdenacker <michael.opdenacker-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Date: Fri, 6 Sep 2013 13:49:22 +0200
> This patch proposes to remove the MLX5_DEBUG kernel configuration
> parameter defined in drivers/net/ethernet/mellanox/mlx5/core/Kconfig,
> but used nowhere in the makefiles and source code.
>
> This could also be fixed by using this parameter,
> but this may be a leftover from driver development...
>
> Signed-off-by: Michael Opdenacker <michael.opdenacker-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH net-next v2] net: add documentation for BQL helpers
From: David Miller @ 2013-09-06 18:47 UTC (permalink / raw)
To: f.fainelli; +Cc: netdev, eric.dumazet
In-Reply-To: <1378483080-31632-1-git-send-email-f.fainelli@gmail.com>
From: "Florian Fainelli" <f.fainelli@gmail.com>
Date: Fri, 6 Sep 2013 16:58:00 +0100
> Provide a kernel-doc comment documentation for the BQL helpers:
> - netdev_sent_queue
> - netdev_completed_queue
> - netdev_reset_queue
>
> Similarly to how it is done for the other functions, the documentation
> only covers the function operating on struct net_device and not struct
> netdev_queue.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Applied.
^ permalink raw reply
* Re: [PATCH] tcp: properly increase rcv_ssthresh for ofo packets
From: David Miller @ 2013-09-06 18:48 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev, ncardwell
In-Reply-To: <1378488958.31445.47.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 06 Sep 2013 10:35:58 -0700
> From: Eric Dumazet <edumazet@google.com>
>
> TCP receive window handling is multi staged.
>
> A socket has a memory budget, static or dynamic, in sk_rcvbuf.
>
> Because we do not really know how this memory budget translates to
> a TCP window (payload), TCP announces a small initial window
> (about 20 MSS).
>
> When a packet is received, we increase TCP rcv_win depending
> on the payload/truesize ratio of this packet. Good citizen
> packets give a hint that it's reasonable to have rcv_win = sk_rcvbuf/2
>
> This heuristic takes place in tcp_grow_window()
>
> Problem is : We currently call tcp_grow_window() only for in-order
> packets.
>
> This means that reorders or packet losses stop proper grow of
> rcv_win, and senders are unable to benefit from fast recovery,
> or proper reordering level detection.
>
> Really, a packet being stored in OFO queue is not a bad citizen.
> It should be part of the game as in-order packets.
>
> In our traces, we very often see sender is limited by linux small
> receive windows, even if linux hosts use autotuning (DRS) and should
> allow rcv_win to grow to ~3MB.
>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
> Acked-by: Neal Cardwell <ncardwell@google.com>
Applied.
^ permalink raw reply
* Re: [PATCH 2/2] sh_eth: add device tree support
From: Sergei Shtylyov @ 2013-09-06 19:10 UTC (permalink / raw)
To: Mark Rutland
Cc: netdev@vger.kernel.org, rob.herring@calxeda.com, Pawel Moll,
swarren@wwwdotorg.org, ian.campbell@citrix.com,
grant.likely@linaro.org, devicetree@vger.kernel.org,
nobuhiro.iwamatsu.yj@renesas.com, linux-sh@vger.kernel.org,
rob@landley.net, linux-doc@vger.kernel.org
In-Reply-To: <20130902085225.GF27891@e106331-lin.cambridge.arm.com>
Hello.
On 09/02/2013 12:52 PM, Mark Rutland wrote:
Don't know why I haven't noticed your mail before...
>> Add support of the device tree probing for the Renesas SH-Mobile SoCs.
>> This work is loosely based on an original patch by Nobuhiro Iwamatsu
>> <nobuhiro.iwamatsu.yj@renesas.com>.
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> ---
>> This patch is against Dave's 'net-next.git' repo.
>> Documentation/devicetree/bindings/net/sh_eth.txt | 40 +++++++++++++
>> drivers/net/ethernet/renesas/sh_eth.c | 66 ++++++++++++++++++++++-
>> 2 files changed, 105 insertions(+), 1 deletion(-)
>> Index: net-next/Documentation/devicetree/bindings/net/sh_eth.txt
>> ===================================================================
>> --- /dev/null
>> +++ net-next/Documentation/devicetree/bindings/net/sh_eth.txt
>> @@ -0,0 +1,40 @@
>> +* Renesas Electronics SH EtherMAC
>> +
>> +This file provides information on what the device node for the SH EtherMAC
>> +interface contains.
>> +
>> +Required properties:
>> +- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
>> + "renesas,ether-r8a7779" if the device is a part of R8A7778/9 SoCs.
>> + "renesas,ether-r8a7790" if the device is a part of R8A7790/1 SoCs.
> What are the functional differences between the blocks in these devices
> that mean they have different compatible strings?
RA87740 has Gigabit Ether (GEther) with TSU block (I don't know what TSU
stands for) and the register layout completely different from the other SoCs.
R8A777x and R8A7790 are 100 Mbit/s Ether without TSU block differing in some
minor but vital register details between them; they use so called "R-Car"
register layout contrasted to the "Gigabit" layout of R8A7740.
>> +- reg: offset and length of the register set for the device; if the device has
>> + TSU registers, you need to specify two register sets here.
> This doesn't explicitly state ordering, and doesn't describe what the
> first register set is (control registers?). If possible, it would be
> nice to refer to the set of registers by the name given in
> documentation; is there any available?
No, there's not common name (and I only have R8A777x and R8A7790 docs).
There are two subranges for those SoCs: HDMAC and feLic registers at offsets
0x200 and 0x300 from the "reg" prop start.
> I think we should have something like the below to ensure it's explicit.
> In general we need more consistency in the the way bindings describe reg
> properties.
> - reg: offset and length of:
> [1] the control registers of the device (required)
> [2] the TSU registers for the device (optional)
OK.
>> +- interrupt-parent: the phandle for the interrupt controller that services
>> + interrupts for this device.
> Why is that required?
I'm not sure, maybe it's not.
>> +- interrupts: interrupt mapping for the interrupt source.
> Interrupts are defined in terms of interrupt-specifiers. How about:
> - interrupts: an interrupt-specifier for the sole interrupt
> generated by the device.
OK.
>> +- phy-mode: string, operation mode of the PHY interface (a string that
>> + of_get_phy_mode() can understand).
> That looks suspicious. Bindings should *not* refer to Linux internals.
> Instead, we should document the phy-handle and phy-mode properties and
There's also "phy" variant in use now in addition to the older
"phy-handle". Sigh...
> how they are meant to be used in a generic binding document (I couldn't
> see a generic document doing this so far...).
So you want me to create one?
>> +- phy-handle: phandle of the PHY device.
>> +
>> +Optional properties:
>> +- local-mac-address: 6 bytes, MAC address.
>> +- renesas,no-ether-link: specify when a board does not provide a proper LINK
>> + signal.
>> +- renesas,ether-link-active-low: specify when the LINK signal is active-low.
> What types are these? I know local-mac-address is a byte-string by
> ePAPR, presumably the last two are empty (boolean)?
Exactly.
>> +
>> +Example (Armadillo800EVA board):
>> +
>> + ethernet@e9a00000 {
>> + compatible = "renesas,gether-r8a7740";
>> + reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>;
>> + interrupt-parent = <&gic>;
>> + interrupts = <0 142 0x4>;
>> + phy-mode = "mii";
>> + phy-handle = <&phy0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> + };
> The binding didn't state anything about sub-nodes. Is it a general
> property of phy bindings that they may be embedded within a consumer's
> node?
Considering Ethernet PHY subnodes, yes. They hang off MDIO bus controlled
by the Ethernet MAC registers.
>> + };
>> Index: net-next/drivers/net/ethernet/renesas/sh_eth.c
>> ===================================================================
>> --- net-next.orig/drivers/net/ethernet/renesas/sh_eth.c
>> +++ net-next/drivers/net/ethernet/renesas/sh_eth.c
[...]
>> @@ -2600,6 +2603,52 @@ static const struct net_device_ops sh_et
>> .ndo_change_mtu = eth_change_mtu,
>> };
>>
>> +#ifdef CONFIG_OF
>> +static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
>> +{
>> + struct device_node *np = dev->of_node;
>> + struct sh_eth_plat_data *pdata;
>> + struct device_node *phy;
>> + const char *mac_addr;
>> +
>> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> + if (!pdata)
>> + return NULL;
>> +
>> + pdata->phy_interface = of_get_phy_mode(np);
>> +
>> + phy = of_parse_phandle(np, "phy-handle", 0);
>> + if (!phy || of_property_read_u32(phy, "reg", &pdata->phy)) {
> NAK. You didn't describe the format of the phy node, yet you are reading
> values from it from a logically separate driver.
See Documentation/devicetree/bindings/net/phy.txt. Although I really
didn't follow it closely (and it looks pretty obsolete, requiring
"device_type" and "linux,phandle" props).
> Thanks,
> Mark.
WBR, Sergei
^ permalink raw reply
* Re: GSO/GRO and UDP performance
From: James Yonan @ 2013-09-06 19:26 UTC (permalink / raw)
To: Rick Jones; +Cc: Eric Dumazet, netdev
In-Reply-To: <522A05E9.3090206@hp.com>
On 06/09/2013 10:42, Rick Jones wrote:
> On 09/06/2013 06:07 AM, Eric Dumazet wrote:
>> On Fri, 2013-09-06 at 03:22 -0600, James Yonan wrote:
>>
>>> So I think that playing well with GSO/GRO is essential to get speedup in
>>> UDP apps because of this 43x multiplier.
>>>
>>
>> Thats not true. GRO cannot aggregate more than 16+1 packets.
Where does the 16+1 come from? I'm getting my 43x from the ratio of max
legal IP packet size (64KB) / internet MTU (1500). Are you saying that
GRO cannot aggregate up to 64 KB?
>> I think we cannot aggregate UDP packets, because UDP lacks sequence
>> numbers, so reorders would be a problem.
>> You really need something that is not UDP generic.
Right -- that's why I'm proposing a hook for UDP GSO/GRO providers that
know about specific app-layer protocols and can provide segmentation and
aggregation methods for them. Such a provider would be implemented in a
kernel module and would know about the specific app-layer protocol, so
it would be able to losslessly segment and aggregate it (i.e. it could
use a sequence number from the app-layer protocol).
> It may not be as sexy, and it cannot get the 43x multiplier (just what
> *is* the service demand change on a netperf TCP_STREAM test these days
> between GSO/GRO on and off anyway?)
That's something I haven't really looked too closely at yet. With
MAX_GRO_SKBS set to only 8, how well would this really scale?
> but looking for basic path-length reductions would be goodness.
Path is fairly optimized as-is.
Direction 1: udp_encap_recv -> tunnel decapsulation -> netif_rx
Direction 2: ndo_start_xmit -> tunnel encapsulation -> ip_local_out
I've also looked into getting closer to driver TX by using
dev_queue_xmit instead of ip_local_out.
Even though this is a virtual driver without interrupts, I'm also
looking at NAPI as a way of getting packet flows into GRO on the RX side.
Bottom line is that I want to saturate 10 GigE with UDP packets without
breaking a sweat. ixgbe or other drivers in that class can handle it if
the per-packet overhead in the network stack can be reduced enough.
James
^ permalink raw reply
* Re: GSO/GRO and UDP performance
From: Eric Dumazet @ 2013-09-06 19:32 UTC (permalink / raw)
To: James Yonan; +Cc: Rick Jones, netdev
In-Reply-To: <522A2C76.10203@openvpn.net>
On Fri, 2013-09-06 at 13:26 -0600, James Yonan wrote:
> Where does the 16+1 come from? I'm getting my 43x from the ratio of max
> legal IP packet size (64KB) / internet MTU (1500). Are you saying that
> GRO cannot aggregate up to 64 KB?
>
Yes this is what I said.
Hint : MAX_SKB_FRAGS is the number of fragments per skb
Each aggregated frame consumes at least one fragment.
Hint : some drivers uses more than one fragment per datagram.
-> A fragment in skb does not necessarily contains one and exactly one
datagram
> >> I think we cannot aggregate UDP packets, because UDP lacks sequence
> >> numbers, so reorders would be a problem.
>
> >> You really need something that is not UDP generic.
>
> Right -- that's why I'm proposing a hook for UDP GSO/GRO providers that
> know about specific app-layer protocols and can provide segmentation and
> aggregation methods for them. Such a provider would be implemented in a
> kernel module and would know about the specific app-layer protocol, so
> it would be able to losslessly segment and aggregate it (i.e. it could
> use a sequence number from the app-layer protocol).
Its not a choice given by application.
As I said you'll have to make sure all the stack will understand the
meaning of datagram aggregation.
^ permalink raw reply
* [GIT] Networking
From: David Miller @ 2013-09-06 19:40 UTC (permalink / raw)
To: torvalds; +Cc: akpm, netdev, linux-kernel
A quick set of fixes, some to deal with fallout from yesterday's
net-next merge.
1) Fix compilation of bnx2x driver with CONFIG_BNX2X_SRIOV disabled, from
Dmitry Kravkov.
2) Fix a bnx2x regression caused by one of Dave Jones's mistaken braces
changes, from Eilon Greenstein.
3) Add some protective filtering in the netlink tap code, from Daniel
Borkmann.
4) Fix TCP congestion window growth regression after timeouts, from
Yuchung Cheng.
5) Correctly adjust TCP's rcv_ssthresh for out of order packets, from
Eric Dumazet.
Please pull, thanks a lot!
The following changes since commit 2e032852245b3dcfe5461d7353e34eb6da095ccf:
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm (2013-09-05 18:07:32 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git master
for you to fetch changes up to 4e4f1fc226816905c937f9b29dabe351075dfe0f:
tcp: properly increase rcv_ssthresh for ofo packets (2013-09-06 14:43:49 -0400)
----------------------------------------------------------------
Daniel Borkmann (1):
net: netlink: filter particular protocols from analyzers
Dmitry Kravkov (1):
bnx2x: fix broken compilation with CONFIG_BNX2X_SRIOV is not set
Eilon Greenstein (1):
bnx2x: Restore a call to config_init
Eric Dumazet (1):
tcp: properly increase rcv_ssthresh for ofo packets
Florian Fainelli (1):
net: add documentation for BQL helpers
Michael Opdenacker (1):
mlx5: remove unused MLX5_DEBUG param in Kconfig
Yuchung Cheng (1):
tcp: fix no cwnd growth after timeout
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 9 +++------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 2 ++
drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 10 ----------
include/linux/netdevice.h | 26 ++++++++++++++++++++++++++
net/ipv4/tcp_input.c | 11 ++++++-----
net/netlink/af_netlink.c | 30 ++++++++++++++++++++++++++++++
6 files changed, 67 insertions(+), 21 deletions(-)
^ permalink raw reply
* [PATCH -net 1/2] bonding: fix store_arp_validate race with mode change
From: Nikolay Aleksandrov @ 2013-09-06 19:41 UTC (permalink / raw)
To: netdev; +Cc: fubar, davem, andy, mleitner
In-Reply-To: <1378496518-16104-1-git-send-email-nikolay@redhat.com>
We need to protect store_arp_validate via rtnl because it can race with
mode changing and we can end up having arp_validate set in a mode
different from active-backup.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
---
drivers/net/bonding/bond_sysfs.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ce46776..4e38683 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -419,27 +419,33 @@ static ssize_t bonding_store_arp_validate(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value;
+ int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ if (!rtnl_trylock())
+ return restart_syscall();
new_value = bond_parse_parm(buf, arp_validate_tbl);
if (new_value < 0) {
pr_err("%s: Ignoring invalid arp_validate value %s\n",
bond->dev->name, buf);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
pr_err("%s: arp_validate only supported in active-backup mode.\n",
bond->dev->name);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
pr_info("%s: setting arp_validate to %s (%d).\n",
bond->dev->name, arp_validate_tbl[new_value].modename,
new_value);
bond->params.arp_validate = new_value;
+out:
+ rtnl_unlock();
- return count;
+ return ret;
}
static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate,
--
1.8.1.4
^ permalink raw reply related
* [PATCH -net 0/2] bonding: fix arp_validate desync state & race
From: Nikolay Aleksandrov @ 2013-09-06 19:41 UTC (permalink / raw)
To: netdev; +Cc: fubar, davem, andy, mleitner
Hello all,
These two patches aim to fix the possible de-sync state which the bond
can enter if we have arp_validate without arp_interval or the other way
around. They also fix a race condition between arp_validate setting and
mode changing.
Patch 01 - fixes the race condition between store_arp_validate and bond
mode change by using rtnl for sync
Patch 02 - fixes the possible de-sync state by setting/unsetting recv_probe
if arp_interval is set/unset and also if arp_validate is set/unset
Best regards,
Nikolay Aleksandrov
Nikolay Aleksandrov (2):
bonding: fix store_arp_validate race with mode change
bonding: fix bond_arp_rcv setting and arp validate desync state
drivers/net/bonding/bond_main.c | 4 ++--
drivers/net/bonding/bond_sysfs.c | 31 +++++++++++++++++++++++++------
drivers/net/bonding/bonding.h | 1 +
3 files changed, 28 insertions(+), 8 deletions(-)
--
1.8.1.4
^ permalink raw reply
* [PATCH -net 2/2] bonding: fix bond_arp_rcv setting and arp validate desync state
From: Nikolay Aleksandrov @ 2013-09-06 19:41 UTC (permalink / raw)
To: netdev; +Cc: fubar, davem, andy, mleitner
In-Reply-To: <1378496518-16104-1-git-send-email-nikolay@redhat.com>
We make bond_arp_rcv global so it can be used in bond_sysfs if the bond
interface is up and arp_interval is being changed to a positive value
and cleared otherwise as per Jay's suggestion.
This also fixes a problem where bond_arp_rcv was set even though
arp_validate was disabled while the bond was up by unsetting recv_probe
in bond_store_arp_validate and respectively setting it if enabled.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
---
I've intentionally left the prototype line >80 chars, let me know if I
should break it.
drivers/net/bonding/bond_main.c | 4 ++--
drivers/net/bonding/bond_sysfs.c | 19 ++++++++++++++++---
drivers/net/bonding/bonding.h | 1 +
3 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 39e5b1c..72df399 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2404,8 +2404,8 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32
slave->target_last_arp_rx[i] = jiffies;
}
-static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
- struct slave *slave)
+int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
+ struct slave *slave)
{
struct arphdr *arp = (struct arphdr *)skb->data;
unsigned char *arp_ptr;
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 4e38683..9afb1c5 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -349,6 +349,8 @@ static ssize_t bonding_store_mode(struct device *d,
goto out;
}
+ /* don't cache arp_validate between modes */
+ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
bond->params.mode = new_value;
bond_set_mode_ops(bond, bond->params.mode);
pr_info("%s: setting mode to %s (%d).\n",
@@ -419,8 +421,8 @@ static ssize_t bonding_store_arp_validate(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ int new_value, ret = count;
if (!rtnl_trylock())
return restart_syscall();
@@ -431,7 +433,7 @@ static ssize_t bonding_store_arp_validate(struct device *d,
ret = -EINVAL;
goto out;
}
- if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
+ if (new_value && bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
pr_err("%s: arp_validate only supported in active-backup mode.\n",
bond->dev->name);
ret = -EINVAL;
@@ -441,6 +443,12 @@ static ssize_t bonding_store_arp_validate(struct device *d,
bond->dev->name, arp_validate_tbl[new_value].modename,
new_value);
+ if (bond->dev->flags & IFF_UP) {
+ if (!new_value)
+ bond->recv_probe = NULL;
+ else if (bond->params.arp_interval)
+ bond->recv_probe = bond_arp_rcv;
+ }
bond->params.arp_validate = new_value;
out:
rtnl_unlock();
@@ -561,8 +569,8 @@ static ssize_t bonding_store_arp_interval(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ int new_value, ret = count;
if (!rtnl_trylock())
return restart_syscall();
@@ -605,8 +613,13 @@ static ssize_t bonding_store_arp_interval(struct device *d,
* is called.
*/
if (!new_value) {
+ if (bond->params.arp_validate)
+ bond->recv_probe = NULL;
cancel_delayed_work_sync(&bond->arp_work);
} else {
+ /* arp_validate can be set only in active-backup mode */
+ if (bond->params.arp_validate)
+ bond->recv_probe = bond_arp_rcv;
cancel_delayed_work_sync(&bond->mii_work);
queue_delayed_work(bond->wq, &bond->arp_work, 0);
}
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index f7ab161..7ad8bd5 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -430,6 +430,7 @@ static inline bool slave_can_tx(struct slave *slave)
struct bond_net;
+int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, struct slave *slave);
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id);
--
1.8.1.4
^ permalink raw reply related
* Re: [PATCH -net 0/2] bonding: fix arp_validate desync state & race
From: Nikolay Aleksandrov @ 2013-09-06 20:10 UTC (permalink / raw)
To: netdev; +Cc: fubar, davem, andy, mleitner
In-Reply-To: <1378496518-16104-1-git-send-email-nikolay@redhat.com>
On 09/06/2013 09:41 PM, Nikolay Aleksandrov wrote:
> Hello all,
> These two patches aim to fix the possible de-sync state which the bond
> can enter if we have arp_validate without arp_interval or the other way
> around. They also fix a race condition between arp_validate setting and
> mode changing.
>
> Patch 01 - fixes the race condition between store_arp_validate and bond
> mode change by using rtnl for sync
> Patch 02 - fixes the possible de-sync state by setting/unsetting recv_probe
> if arp_interval is set/unset and also if arp_validate is set/unset
>
> Best regards,
> Nikolay Aleksandrov
>
>
> Nikolay Aleksandrov (2):
> bonding: fix store_arp_validate race with mode change
> bonding: fix bond_arp_rcv setting and arp validate desync state
>
> drivers/net/bonding/bond_main.c | 4 ++--
> drivers/net/bonding/bond_sysfs.c | 31 +++++++++++++++++++++++++------
> drivers/net/bonding/bonding.h | 1 +
> 3 files changed, 28 insertions(+), 8 deletions(-)
>
Ugh, self-nack I just noticed the mode check in store_arp_validate passes
if new_value is 0.
I'll wait some time to see if there isn't anything else and re-post.
Cheers,
Nik
^ permalink raw reply
* Re: [RFC PATCHv2 0/4] Add DT support for fixed PHYs
From: Florian Fainelli @ 2013-09-06 20:42 UTC (permalink / raw)
To: Thomas Petazzoni
Cc: David S. Miller, netdev, devicetree, Lior Amsalem,
Gregory Clement, Ezequiel Garcia, linux-arm-kernel, Mark Rutland,
Sascha Hauer, Christian Gmeiner
In-Reply-To: <1378480701-12908-1-git-send-email-thomas.petazzoni@free-electrons.com>
Hello Thomas,
Le vendredi 6 septembre 2013 17:18:17 Thomas Petazzoni a écrit :
> Hello,
>
> Here is a second version of the patch set that adds a Device Tree
> binding and the related code to support fixed PHYs. Marked as RFC,
> this patch set is obviously not intended for merging in 3.12.
Thanks a lot for continuing on this work, I really like the state of it now.
>
> Since the first version, the changes have been:
>
> * Instead of using a 'fixed-link' property inside the Ethernet device
> DT node, with a fairly cryptic succession of integer values, we now
> use a PHY subnode under the Ethernet device DT node, with explicit
> properties to configure the duplex, speed, pause and other PHY
> properties.
>
> * The PHY address is automatically allocated by the kernel and no
> longer visible in the Device Tree binding.
>
> * The PHY device is created directly when the network driver calls
> of_phy_connect_fixed_link(), and associated to the PHY DT node,
> which allows the existing of_phy_connect() function to work,
> without the need to use the deprecated of_phy_connect_fixed_link().
>
> The things I am not entirely happy with yet are:
>
> * The PHY ID is hardcoded to 0xdeadbeef. Ideally, it should be a
> properly reserved vendor/device identifier, but it isn't clear how
> to get one allocated for this purpose.
Right, we should try to get something better, but we obviously cannot use an
already allocated OUI for this. Can we ask the Linux foundation or a Linux-
friendly company to allocate one maybe?
>
> * The fixed_phy_register() function in drivers/net/phy/fixed.c has
> some OF references. So ideally, I would have preferred to put this
> code in drivers/of/of_mdio.c, but to call get_phy_device(), we need
> a reference to the mii_bus structure that represents the fixed MDIO
> bus.
This is not a big deal, not everything in drivers/ is consistent with this,
and making the fixed MDIO bus globally accessible does not sound too great.
>
> * There is some error management missing in fixed_phy_register(), but
> it can certainly be added easily. This RFC is meant to sort out the
> general idea.
Do you think you could add these to got beyond the RFC state? The patchset as
it currently is fine with me if you can address these.
--
Florian
^ permalink raw reply
* [PATCH -net v2 0/2] bonding: fix arp_validate desync state & race
From: Nikolay Aleksandrov @ 2013-09-06 22:00 UTC (permalink / raw)
To: netdev; +Cc: fubar, andy, davem
Hello all,
These two patches aim to fix the possible de-sync state which the bond
can enter if we have arp_validate without arp_interval or the other way
around. They also fix a race condition between arp_validate setting and
mode changing.
Patch 01 - fixes the race condition between store_arp_validate and bond
mode change by using rtnl for sync
Patch 02 - fixes the possible de-sync state by setting/unsetting recv_probe
if arp_interval is set/unset and also if arp_validate is set/unset
v2: Fix the mode check in store_arp_validate
Best regards,
Nikolay Aleksandrov
Nikolay Aleksandrov (2):
bonding: fix store_arp_validate race with mode change
bonding: fix bond_arp_rcv setting and arp validate desync state
drivers/net/bonding/bond_main.c | 4 ++--
drivers/net/bonding/bond_sysfs.c | 31 +++++++++++++++++++++++++------
drivers/net/bonding/bonding.h | 1 +
3 files changed, 28 insertions(+), 8 deletions(-)
--
1.8.1.4
^ permalink raw reply
* [PATCH -net v2 1/2] bonding: fix store_arp_validate race with mode change
From: Nikolay Aleksandrov @ 2013-09-06 22:00 UTC (permalink / raw)
To: netdev; +Cc: fubar, andy, davem
In-Reply-To: <1378504826-18855-1-git-send-email-nikolay@redhat.com>
We need to protect store_arp_validate via rtnl because it can race with
mode changing and we can end up having arp_validate set in a mode
different from active-backup.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
---
v2: no change
drivers/net/bonding/bond_sysfs.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ce46776..4e38683 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -419,27 +419,33 @@ static ssize_t bonding_store_arp_validate(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value;
+ int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ if (!rtnl_trylock())
+ return restart_syscall();
new_value = bond_parse_parm(buf, arp_validate_tbl);
if (new_value < 0) {
pr_err("%s: Ignoring invalid arp_validate value %s\n",
bond->dev->name, buf);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
pr_err("%s: arp_validate only supported in active-backup mode.\n",
bond->dev->name);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
pr_info("%s: setting arp_validate to %s (%d).\n",
bond->dev->name, arp_validate_tbl[new_value].modename,
new_value);
bond->params.arp_validate = new_value;
+out:
+ rtnl_unlock();
- return count;
+ return ret;
}
static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate,
--
1.8.1.4
^ permalink raw reply related
* [PATCH -net v2 2/2] bonding: fix bond_arp_rcv setting and arp validate desync state
From: Nikolay Aleksandrov @ 2013-09-06 22:00 UTC (permalink / raw)
To: netdev; +Cc: fubar, andy, davem
In-Reply-To: <1378504826-18855-1-git-send-email-nikolay@redhat.com>
We make bond_arp_rcv global so it can be used in bond_sysfs if the bond
interface is up and arp_interval is being changed to a positive value
and cleared otherwise as per Jay's suggestion.
This also fixes a problem where bond_arp_rcv was set even though
arp_validate was disabled while the bond was up by unsetting recv_probe
in bond_store_arp_validate and respectively setting it if enabled.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
---
v2: fix the mode check in store_arp_validate
I've intentionally left the prototype line >80 chars, let me know if I
should break it.
drivers/net/bonding/bond_main.c | 4 ++--
drivers/net/bonding/bond_sysfs.c | 19 ++++++++++++++++---
drivers/net/bonding/bonding.h | 1 +
3 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 39e5b1c..72df399 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2404,8 +2404,8 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32
slave->target_last_arp_rx[i] = jiffies;
}
-static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
- struct slave *slave)
+int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
+ struct slave *slave)
{
struct arphdr *arp = (struct arphdr *)skb->data;
unsigned char *arp_ptr;
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 4e38683..eeab40b 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -349,6 +349,8 @@ static ssize_t bonding_store_mode(struct device *d,
goto out;
}
+ /* don't cache arp_validate between modes */
+ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
bond->params.mode = new_value;
bond_set_mode_ops(bond, bond->params.mode);
pr_info("%s: setting mode to %s (%d).\n",
@@ -419,8 +421,8 @@ static ssize_t bonding_store_arp_validate(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ int new_value, ret = count;
if (!rtnl_trylock())
return restart_syscall();
@@ -431,7 +433,7 @@ static ssize_t bonding_store_arp_validate(struct device *d,
ret = -EINVAL;
goto out;
}
- if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
+ if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
pr_err("%s: arp_validate only supported in active-backup mode.\n",
bond->dev->name);
ret = -EINVAL;
@@ -441,6 +443,12 @@ static ssize_t bonding_store_arp_validate(struct device *d,
bond->dev->name, arp_validate_tbl[new_value].modename,
new_value);
+ if (bond->dev->flags & IFF_UP) {
+ if (!new_value)
+ bond->recv_probe = NULL;
+ else if (bond->params.arp_interval)
+ bond->recv_probe = bond_arp_rcv;
+ }
bond->params.arp_validate = new_value;
out:
rtnl_unlock();
@@ -561,8 +569,8 @@ static ssize_t bonding_store_arp_interval(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ int new_value, ret = count;
if (!rtnl_trylock())
return restart_syscall();
@@ -605,8 +613,13 @@ static ssize_t bonding_store_arp_interval(struct device *d,
* is called.
*/
if (!new_value) {
+ if (bond->params.arp_validate)
+ bond->recv_probe = NULL;
cancel_delayed_work_sync(&bond->arp_work);
} else {
+ /* arp_validate can be set only in active-backup mode */
+ if (bond->params.arp_validate)
+ bond->recv_probe = bond_arp_rcv;
cancel_delayed_work_sync(&bond->mii_work);
queue_delayed_work(bond->wq, &bond->arp_work, 0);
}
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index f7ab161..7ad8bd5 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -430,6 +430,7 @@ static inline bool slave_can_tx(struct slave *slave)
struct bond_net;
+int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, struct slave *slave);
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id);
--
1.8.1.4
^ permalink raw reply related
* [PATCH net 1/1] qlcnic: Fix warning reported by kbuild test robot.
From: Jitendra Kalsaria @ 2013-09-06 22:04 UTC (permalink / raw)
To: davem
Cc: netdev, sony.chacko, shahed.shaikh, Dept-HSGLinuxNICDev,
Jitendra Kalsaria
From: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c: In function 'qlcnic_handle_fw_message':
drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:922:4: warning: overflow in implicit constant conversion [-Woverflow]
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 88349b8..81bf836 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -430,7 +430,7 @@ struct qlcnic_hardware_context {
u8 diag_test;
u8 num_msix;
u8 nic_mode;
- char diag_cnt;
+ int diag_cnt;
u16 max_uc_count;
u16 port_type;
--
1.7.1
^ permalink raw reply related
* Re: [PATCH net] bnx2x: Restore a call to config_init
From: Eric Dumazet @ 2013-09-06 22:39 UTC (permalink / raw)
To: David Miller; +Cc: eilong, netdev, davej
In-Reply-To: <20130906.144733.708978789363351557.davem@davemloft.net>
On Fri, 2013-09-06 at 14:47 -0400, David Miller wrote:
> From: "Eilon Greenstein" <eilong@broadcom.com>
> Date: Fri, 6 Sep 2013 12:55:02 +0300
>
> > Commit c0a77ec74f295013d7ba3204dd3ed25fccf83cb4 'bnx2x: Add missing braces in
> > bnx2x:bnx2x_link_initialize' identified indentation problem, but resolved it
> > by adding braces instead of fixing the indentation. The braces now prevents a
> > config_init call in some cases, though it should be called regardless of that
> > condition. This patch removes the braces and fix the confusing indentation
> > that caused this mess.
> >
> > Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
>
> Applied.
Oh well, latest net tree broke bnx2x again.
No idea why.
[ 61.203313] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 74.021238] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 76.109176] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 78.198178] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 80.286960] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 93.031584] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 95.069939] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 97.133493] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 99.195912] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 112.026026] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 114.087991] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 116.148976] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
[ 118.237310] bnx2x: [bnx2x_clean_tx_queue:1259(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(1) != txdata->tx_pkt_cons(0)
^ permalink raw reply
* Re: rtnl_lock deadlock on 3.10
From: Shawn Bohrer @ 2013-09-06 22:55 UTC (permalink / raw)
To: Bart Van Assche
Cc: Steve Wise, Shawn Bohrer, Or Gerlitz, Cong Wang,
netdev-u79uwXL29TY76Z2rM5mHXA, linux-rdma-u79uwXL29TY76Z2rM5mHXA,
roland-BHEL68pLQRGGvPXPguhicg, swise-ut6Up61K2wZBDgjK7y7TUQ
In-Reply-To: <522856A4.8040800-HInyCGIudOg@public.gmane.org>
On Thu, Sep 05, 2013 at 12:02:12PM +0200, Bart Van Assche wrote:
> On 07/30/13 14:54, Steve Wise wrote:
> >On 7/29/2013 6:02 PM, Shawn Bohrer wrote:
> >>On Mon, Jul 15, 2013 at 09:38:19AM -0500, Shawn Bohrer wrote:
> >>>On Wed, Jul 03, 2013 at 08:26:11PM +0300, Or Gerlitz wrote:
> >>>>On 03/07/2013 20:22, Shawn Bohrer wrote:
> >>>>>On Wed, Jul 03, 2013 at 07:33:07AM +0200, Hannes Frederic Sowa wrote:
> >>>>>>On Wed, Jul 03, 2013 at 07:11:52AM +0200, Hannes Frederic Sowa wrote:
> >>>>>>>On Tue, Jul 02, 2013 at 01:38:26PM +0000, Cong Wang wrote:
> >>>>>>>>On Tue, 02 Jul 2013 at 08:28 GMT, Hannes Frederic Sowa
> >>>>>>>><hannes-tFNcAqjVMyqKXQKiL6tip0B+6BGkLq7r@public.gmane.org> wrote:
> >>>>>>>>>On Mon, Jul 01, 2013 at 09:54:56AM -0500, Shawn Bohrer wrote:
> >>>>>>>>>>I've managed to hit a deadlock at boot a couple times while
> >>>>>>>>>>testing
> >>>>>>>>>>the 3.10 rc kernels. It seems to always happen when my network
> >>>>>>>>>>devices are initializing. This morning I updated to v3.10 and
> >>>>>>>>>>made a
> >>>>>>>>>>few config tweaks and so far I've hit it 4 out of 5 reboots.
> >>>>>>>>>>It looks
> >>>>>>>>>>like most processes are getting stuck on rtnl_lock. Below is
> >>>>>>>>>>a boot
> >>>>>>>>>>log with the soft lockup prints. Please let know if there is any
> >>>>>>>>>>other information I can provide:
> >>>>>>>>>Could you try a build with CONFIG_LOCKDEP enabled?
> >>>>>>>>>
> >>>>>>>>The problem is clear: ib_register_device() is called with
> >>>>>>>>rtnl_lock,
> >>>>>>>>but itself needs device_mutex, however, ib_register_client() first
> >>>>>>>>acquires device_mutex, then indirectly calls register_netdev()
> >>>>>>>>which
> >>>>>>>>takes rtnl_lock. Deadlock!
> >>>>>>>>
> >>>>>>>>One possible fix is always taking rtnl_lock before taking
> >>>>>>>>device_mutex, something like below:
> >>>>>>>>
> >>>>>>>>diff --git a/drivers/infiniband/core/device.c
> >>>>>>>>b/drivers/infiniband/core/device.c
> >>>>>>>>index 18c1ece..890870b 100644
> >>>>>>>>--- a/drivers/infiniband/core/device.c
> >>>>>>>>+++ b/drivers/infiniband/core/device.c
> >>>>>>>>@@ -381,6 +381,7 @@ int ib_register_client(struct ib_client
> >>>>>>>>*client)
> >>>>>>>> {
> >>>>>>>> struct ib_device *device;
> >>>>>>>>+ rtnl_lock();
> >>>>>>>> mutex_lock(&device_mutex);
> >>>>>>>> list_add_tail(&client->list, &client_list);
> >>>>>>>>@@ -389,6 +390,7 @@ int ib_register_client(struct ib_client
> >>>>>>>>*client)
> >>>>>>>> client->add(device);
> >>>>>>>> mutex_unlock(&device_mutex);
> >>>>>>>>+ rtnl_unlock();
> >>>>>>>> return 0;
> >>>>>>>> }
> >>>>>>>>diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c
> >>>>>>>>b/drivers/infiniband/ulp/ipoib/ipoib_main.c
> >>>>>>>>index b6e049a..5a7a048 100644
> >>>>>>>>--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
> >>>>>>>>+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
> >>>>>>>>@@ -1609,7 +1609,7 @@ static struct net_device
> >>>>>>>>*ipoib_add_port(const char *format,
> >>>>>>>> goto event_failed;
> >>>>>>>> }
> >>>>>>>>- result = register_netdev(priv->dev);
> >>>>>>>>+ result = register_netdevice(priv->dev);
> >>>>>>>> if (result) {
> >>>>>>>> printk(KERN_WARNING "%s: couldn't register ipoib port
> >>>>>>>>%d; error %d\n",
> >>>>>>>> hca->name, port, result);
> >>>>>>>Looks good to me. Shawn, could you test this patch?
> >>>>>>ib_unregister_device/ib_unregister_client would need the same change,
> >>>>>>too. I have not checked the other ->add() and ->remove()
> >>>>>>functions. Also
> >>>>>>cc'ed linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Roland Dreier.
> >>>>>Cong's patch is missing the #include <linux/rtnetlink.h> but otherwise
> >>>>>I've had 34 successful reboots with no deadlocks which is a good sign.
> >>>>>It sounds like there are more paths that need to be audited and a
> >>>>>proper patch submitted. I can do more testing later if needed.
> >>>>>
> >>>>>Thanks,
> >>>>>Shawn
> >>>>>
> >>>>Guys, I was a bit busy today looking into that, but I don't think we
> >>>>want the IB core layer (core/device.c) to
> >>>>use rtnl locking which is something that belongs to the network stack.
> >>>Has anymore thought been put into a proper fix for this issue?
> >>I'm no expert in this area but I'm having a hard time seeing a
> >>different solution than the one Cong suggested. Just to be clear the
> >>deadlock I hit was between cxgb3 and the ipoib module, so I've Cc'd
> >>Steve Wise in case he has a better solution from the Chelsio side.
> >
> >I don't know of another way to resolve this. The rtnl lock is used in
> >ipoib and mlx4 already. I think we should go forward with the proposed
> >patch.
>
> (replying to an e-mail of one month ago)
>
> Hello,
>
> It would be appreciated if anyone could report what the current
> status of this issue is. I think a deadlock I ran into with kernels
> 3.10 and 3.11 and PCI pass-through is related to this issue. See
> also http://bugzilla.kernel.org/show_bug.cgi?id=60856 for the
> lockdep report.
Hey Bart,
It looks like you hit a different issue. Yours is a deadlock between
the s_active refcount on the sysfs dir and the rtnl_lock. My issue
is a deadlock between the infiniband device_mutex and the rtnl_lock.
Sadly I don't have a solution for your issue either but I haven't
looked too hard.
--
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [net-next v4] vxlan: Notify drivers for listening UDP port changes
From: Daniel Borkmann @ 2013-09-06 23:05 UTC (permalink / raw)
To: Jeff Kirsher
Cc: davem, Joseph Gasparakis, netdev, gospo, sassmann, John Fastabend,
Stephen Hemminger
In-Reply-To: <1378286019-8719-1-git-send-email-jeffrey.t.kirsher@intel.com>
On 09/04/2013 11:13 AM, Jeff Kirsher wrote:
> From: Joseph Gasparakis <joseph.gasparakis@intel.com>
>
> This patch adds two more ndo ops: ndo_add_rx_vxlan_port() and
> ndo_del_rx_vxlan_port().
>
> Drivers can get notifications through the above functions about changes
> of the UDP listening port of VXLAN. Also, when physical ports come up,
> now they can call vxlan_get_rx_port() in order to obtain the port number(s)
> of the existing VXLAN interface in case they already up before them.
>
> This information about the listening UDP port would be used for VXLAN
> related offloads.
>
> A big thank you to John Fastabend (john.r.fastabend@intel.com) for his
> input and his suggestions on this patch set.
>
> CC: John Fastabend <john.r.fastabend@intel.com>
> CC: Stephen Hemminger <stephen@networkplumber.org>
> Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
> drivers/net/vxlan.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++-
> include/linux/netdevice.h | 19 +++++++++++++
> include/net/vxlan.h | 1 +
> 3 files changed, 87 insertions(+), 1 deletion(-)
[...]
> +/* Calls the ndo_add_vxlan_port of the caller in order to
> + * supply the listening VXLAN udp ports.
> + */
> +void vxlan_get_rx_port(struct net_device *dev)
> +{
> + struct vxlan_sock *vs;
> + struct net *net = dev_net(dev);
> + struct vxlan_net *vn = net_generic(net, vxlan_net_id);
> + sa_family_t sa_family;
> + u16 port;
> + int i;
> +
> + if (!dev || !dev->netdev_ops || !dev->netdev_ops->ndo_add_vxlan_port)
> + return;
Here, either parts of this if statement are unnecessary, or in case they are
necessary then vars 'net' and 'vn' should have been assigned after that I think
as we would first get an offset and then dereference it before actually checking
if dev is NULL.
> + spin_lock(&vn->sock_lock);
> + for (i = 0; i < PORT_HASH_SIZE; ++i) {
> + hlist_for_each_entry_rcu(vs, vs_head(net, i), hlist) {
> + port = htons(inet_sk(vs->sock->sk)->inet_sport);
> + sa_family = vs->sock->sk->sk_family;
> + dev->netdev_ops->ndo_add_vxlan_port(dev, sa_family,
> + port);
> + }
> + }
> + spin_unlock(&vn->sock_lock);
> +}
> +EXPORT_SYMBOL_GPL(vxlan_get_rx_port);
^ permalink raw reply
* Re: rtnl_lock deadlock on 3.10
From: Shawn Bohrer @ 2013-09-06 23:19 UTC (permalink / raw)
To: Steve Wise
Cc: roland-BHEL68pLQRGGvPXPguhicg, Bart Van Assche, Shawn Bohrer,
Or Gerlitz, Cong Wang, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-rdma-u79uwXL29TY76Z2rM5mHXA, swise-ut6Up61K2wZBDgjK7y7TUQ
In-Reply-To: <52289FEB.7060606-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
On Thu, Sep 05, 2013 at 10:14:51AM -0500, Steve Wise wrote:
> Roland, what do you think?
>
> As I've said, I think we should go ahead with using the rtnl lock in
> the core. Is there a complete patch available for review? looks
> like the original was a partial fix.
I guess I should realize that when no one jumps at fixing my issues
for me that they probably aren't simple to fix. The solution that
Cong proposed was to acquire rtnl_lock() before acquiring the
infiniband device_mutex, and his partial patch did that in
ib_register_client(). The problem is that you would also need to do
that in ib_unregister_client(), ib_register_device(), and
ib_unregister_device(), and that brings us back to the original
problem which was that cxgb3 was holding the rtnl_lock() when it
called ib_register_device(). Thus with the proposed fix I believe
cxgb3 would already be holding the rtnl_lock() and then call
ib_register_device() which would try to acquire the rtnl_lock() again
and deadlock for a different reason.
Actually how does this currently work? ib_register_device() calls
client->add() for each client in the list which should call
ipoib_add_one() which calls register_netdev(). Shouldn't that also
deadlock in the cxgb3 case?
Also while digging through this I think I see another bug which is
that ipoib_dev_cleanup() can be called from ipoib_add_port() but in
the current code ipoib_add_port() is not holding the rtnl_lock() which
appears to be a requirement of ipoib_dev_cleanup().
Sigh... I'm going to stop looking at this for now and hopefully
someone can propose a better solution to this issue.
Thanks,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [net-next v4] vxlan: Notify drivers for listening UDP port changes
From: Joseph Gasparakis @ 2013-09-06 23:42 UTC (permalink / raw)
To: Daniel Borkmann
Cc: Jeff Kirsher, davem, Joseph Gasparakis, netdev, gospo, sassmann,
John Fastabend, Stephen Hemminger
In-Reply-To: <522A5FA9.7000001@redhat.com>
On Fri, 6 Sep 2013, Daniel Borkmann wrote:
> On 09/04/2013 11:13 AM, Jeff Kirsher wrote:
> > From: Joseph Gasparakis <joseph.gasparakis@intel.com>
> >
> > This patch adds two more ndo ops: ndo_add_rx_vxlan_port() and
> > ndo_del_rx_vxlan_port().
> >
> > Drivers can get notifications through the above functions about changes
> > of the UDP listening port of VXLAN. Also, when physical ports come up,
> > now they can call vxlan_get_rx_port() in order to obtain the port number(s)
> > of the existing VXLAN interface in case they already up before them.
> >
> > This information about the listening UDP port would be used for VXLAN
> > related offloads.
> >
> > A big thank you to John Fastabend (john.r.fastabend@intel.com) for his
> > input and his suggestions on this patch set.
> >
> > CC: John Fastabend <john.r.fastabend@intel.com>
> > CC: Stephen Hemminger <stephen@networkplumber.org>
> > Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
> > Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> > ---
> > drivers/net/vxlan.c | 68
> > ++++++++++++++++++++++++++++++++++++++++++++++-
> > include/linux/netdevice.h | 19 +++++++++++++
> > include/net/vxlan.h | 1 +
> > 3 files changed, 87 insertions(+), 1 deletion(-)
> [...]
> > +/* Calls the ndo_add_vxlan_port of the caller in order to
> > + * supply the listening VXLAN udp ports.
> > + */
> > +void vxlan_get_rx_port(struct net_device *dev)
> > +{
> > + struct vxlan_sock *vs;
> > + struct net *net = dev_net(dev);
> > + struct vxlan_net *vn = net_generic(net, vxlan_net_id);
> > + sa_family_t sa_family;
> > + u16 port;
> > + int i;
> > +
> > + if (!dev || !dev->netdev_ops || !dev->netdev_ops->ndo_add_vxlan_port)
> > + return;
>
> Here, either parts of this if statement are unnecessary, or in case they are
> necessary then vars 'net' and 'vn' should have been assigned after that I
> think
> as we would first get an offset and then dereference it before actually
> checking
> if dev is NULL.
That is correct, I started assuming dev will be a valid pointer, but then
I thought I shouldn't trust the caller, so I ended up with this. In fact I
have some upcoming sparse fixes too, so I will incorporate all this in one
patch. For this particular comment I will be checking dev first and
assigning net and vn after that.
>
> > + spin_lock(&vn->sock_lock);
> > + for (i = 0; i < PORT_HASH_SIZE; ++i) {
> > + hlist_for_each_entry_rcu(vs, vs_head(net, i), hlist) {
> > + port = htons(inet_sk(vs->sock->sk)->inet_sport);
> > + sa_family = vs->sock->sk->sk_family;
> > + dev->netdev_ops->ndo_add_vxlan_port(dev, sa_family,
> > + port);
> > + }
> > + }
> > + spin_unlock(&vn->sock_lock);
> > +}
> > +EXPORT_SYMBOL_GPL(vxlan_get_rx_port);
>
^ permalink raw reply
* [net v6 2/8] i40e: transmit, receive, and napi
From: Jeff Kirsher @ 2013-09-06 23:41 UTC (permalink / raw)
To: davem; +Cc: e1000-devel, netdev, Jesse Brandeburg, gospo, sassmann
In-Reply-To: <1378510875-10704-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
This patch contains the transmit, receive, and napi routines, as well
as ancillary routines.
This file is code that is (will be) shared between the VF and PF
drivers.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
CC: e1000-devel@lists.sourceforge.net
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
v1: this is the initial submittal
v2: changes due to netdev feedback, including:
remove memory allocation error messages (stack does for us)
inherit enc_features
v3:
more tabs/spaces fixes
v4:
sparse fixes
indentation/whitespace fixes
__func__ removal
v5:
no parens around return
i40e_atr cleanup
v6:
no changes
---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 1817 +++++++++++++++++++++++++++
1 file changed, 1817 insertions(+)
create mode 100644 drivers/net/ethernet/intel/i40e/i40e_txrx.c
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
new file mode 100644
index 0000000..bb2fa5e
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -0,0 +1,1817 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#include "i40e.h"
+
+static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
+ u32 td_tag)
+{
+ return cpu_to_le64(I40E_TX_DESC_DTYPE_DATA |
+ ((u64)td_cmd << I40E_TXD_QW1_CMD_SHIFT) |
+ ((u64)td_offset << I40E_TXD_QW1_OFFSET_SHIFT) |
+ ((u64)size << I40E_TXD_QW1_TX_BUF_SZ_SHIFT) |
+ ((u64)td_tag << I40E_TXD_QW1_L2TAG1_SHIFT));
+}
+
+/**
+ * i40e_program_fdir_filter - Program a Flow Director filter
+ * @fdir_input: Packet data that will be filter parameters
+ * @pf: The pf pointer
+ * @add: True for add/update, False for remove
+ **/
+i40e_status i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
+ struct i40e_pf *pf, bool add)
+{
+ struct i40e_filter_program_desc *fdir_desc;
+ struct i40e_tx_buffer *tx_buf;
+ struct i40e_tx_desc *tx_desc;
+ struct i40e_ring *tx_ring;
+ struct i40e_vsi *vsi;
+ struct device *dev;
+ dma_addr_t dma;
+ u32 td_cmd = 0;
+ u16 i;
+
+ /* find existing FDIR VSI */
+ vsi = NULL;
+ for (i = 0; i < pf->hw.func_caps.num_vsis; i++)
+ if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR)
+ vsi = pf->vsi[i];
+ if (!vsi)
+ return I40E_ERR_CONFIG;
+
+ tx_ring = &vsi->tx_rings[0];
+ dev = tx_ring->dev;
+
+ dma = dma_map_single(dev, fdir_data->raw_packet,
+ I40E_FDIR_MAX_RAW_PACKET_LOOKUP, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, dma))
+ goto dma_fail;
+
+ /* grab the next descriptor */
+ fdir_desc = I40E_TX_FDIRDESC(tx_ring, tx_ring->next_to_use);
+ tx_buf = &tx_ring->tx_bi[tx_ring->next_to_use];
+ tx_ring->next_to_use++;
+ if (tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+
+ fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32((fdir_data->q_index
+ << I40E_TXD_FLTR_QW0_QINDEX_SHIFT)
+ & I40E_TXD_FLTR_QW0_QINDEX_MASK);
+
+ fdir_desc->qindex_flex_ptype_vsi |= cpu_to_le32((fdir_data->flex_off
+ << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT)
+ & I40E_TXD_FLTR_QW0_FLEXOFF_MASK);
+
+ fdir_desc->qindex_flex_ptype_vsi |= cpu_to_le32((fdir_data->pctype
+ << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT)
+ & I40E_TXD_FLTR_QW0_PCTYPE_MASK);
+
+ /* Use LAN VSI Id if not programmed by user */
+ if (fdir_data->dest_vsi == 0)
+ fdir_desc->qindex_flex_ptype_vsi |=
+ cpu_to_le32((pf->vsi[pf->lan_vsi]->id)
+ << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT);
+ else
+ fdir_desc->qindex_flex_ptype_vsi |=
+ cpu_to_le32((fdir_data->dest_vsi
+ << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT)
+ & I40E_TXD_FLTR_QW0_DEST_VSI_MASK);
+
+ fdir_desc->dtype_cmd_cntindex =
+ cpu_to_le32(I40E_TX_DESC_DTYPE_FILTER_PROG);
+
+ if (add)
+ fdir_desc->dtype_cmd_cntindex |= cpu_to_le32(
+ I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE
+ << I40E_TXD_FLTR_QW1_PCMD_SHIFT);
+ else
+ fdir_desc->dtype_cmd_cntindex |= cpu_to_le32(
+ I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE
+ << I40E_TXD_FLTR_QW1_PCMD_SHIFT);
+
+ fdir_desc->dtype_cmd_cntindex |= cpu_to_le32((fdir_data->dest_ctl
+ << I40E_TXD_FLTR_QW1_DEST_SHIFT)
+ & I40E_TXD_FLTR_QW1_DEST_MASK);
+
+ fdir_desc->dtype_cmd_cntindex |= cpu_to_le32(
+ (fdir_data->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT)
+ & I40E_TXD_FLTR_QW1_FD_STATUS_MASK);
+
+ if (fdir_data->cnt_index != 0) {
+ fdir_desc->dtype_cmd_cntindex |=
+ cpu_to_le32(I40E_TXD_FLTR_QW1_CNT_ENA_MASK);
+ fdir_desc->dtype_cmd_cntindex |=
+ cpu_to_le32((fdir_data->cnt_index
+ << I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT)
+ & I40E_TXD_FLTR_QW1_CNTINDEX_MASK);
+ }
+
+ fdir_desc->fd_id = cpu_to_le32(fdir_data->fd_id);
+
+ /* Now program a dummy descriptor */
+ tx_desc = I40E_TX_DESC(tx_ring, tx_ring->next_to_use);
+ tx_buf = &tx_ring->tx_bi[tx_ring->next_to_use];
+ tx_ring->next_to_use++;
+ if (tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+
+ tx_desc->buffer_addr = cpu_to_le64(dma);
+ td_cmd = I40E_TX_DESC_CMD_EOP |
+ I40E_TX_DESC_CMD_RS |
+ I40E_TX_DESC_CMD_DUMMY;
+
+ tx_desc->cmd_type_offset_bsz =
+ build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_LOOKUP, 0);
+
+ /* Mark the data descriptor to be watched */
+ tx_buf->next_to_watch = tx_desc;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+
+ writel(tx_ring->next_to_use, tx_ring->tail);
+ return 0;
+
+dma_fail:
+ return -1;
+}
+
+/**
+ * i40e_fd_handle_status - check the Programming Status for FD
+ * @rx_ring: the Rx ring for this descriptor
+ * @qw: the descriptor data
+ * @prog_id: the id originally used for programming
+ *
+ * This is used to verify if the FD programming or invalidation
+ * requested by SW to the HW is successful or not and take actions accordingly.
+ **/
+static void i40e_fd_handle_status(struct i40e_ring *rx_ring, u32 qw, u8 prog_id)
+{
+ struct pci_dev *pdev = rx_ring->vsi->back->pdev;
+ u32 error;
+
+ error = (qw & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >>
+ I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;
+
+ /* for now just print the Status */
+ dev_info(&pdev->dev, "FD programming id %02x, Status %08x\n",
+ prog_id, error);
+}
+
+/**
+ * i40e_unmap_tx_resource - Release a Tx buffer
+ * @ring: the ring that owns the buffer
+ * @tx_buffer: the buffer to free
+ **/
+static inline void i40e_unmap_tx_resource(struct i40e_ring *ring,
+ struct i40e_tx_buffer *tx_buffer)
+{
+ if (tx_buffer->dma) {
+ if (tx_buffer->tx_flags & I40E_TX_FLAGS_MAPPED_AS_PAGE)
+ dma_unmap_page(ring->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_single(ring->dev,
+ tx_buffer->dma,
+ tx_buffer->length,
+ DMA_TO_DEVICE);
+ }
+ tx_buffer->dma = 0;
+ tx_buffer->time_stamp = 0;
+}
+
+/**
+ * i40e_clean_tx_ring - Free any empty Tx buffers
+ * @tx_ring: ring to be cleaned
+ **/
+void i40e_clean_tx_ring(struct i40e_ring *tx_ring)
+{
+ struct i40e_tx_buffer *tx_buffer;
+ unsigned long bi_size;
+ u16 i;
+
+ /* ring already cleared, nothing to do */
+ if (!tx_ring->tx_bi)
+ return;
+
+ /* Free all the Tx ring sk_buffs */
+ for (i = 0; i < tx_ring->count; i++) {
+ tx_buffer = &tx_ring->tx_bi[i];
+ i40e_unmap_tx_resource(tx_ring, tx_buffer);
+ if (tx_buffer->skb)
+ dev_kfree_skb_any(tx_buffer->skb);
+ tx_buffer->skb = NULL;
+ }
+
+ bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
+ memset(tx_ring->tx_bi, 0, bi_size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+}
+
+/**
+ * i40e_free_tx_resources - Free Tx resources per queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void i40e_free_tx_resources(struct i40e_ring *tx_ring)
+{
+ i40e_clean_tx_ring(tx_ring);
+ kfree(tx_ring->tx_bi);
+ tx_ring->tx_bi = NULL;
+
+ if (tx_ring->desc) {
+ dma_free_coherent(tx_ring->dev, tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
+ tx_ring->desc = NULL;
+ }
+}
+
+/**
+ * i40e_get_tx_pending - how many tx descriptors not processed
+ * @tx_ring: the ring of descriptors
+ *
+ * Since there is no access to the ring head register
+ * in XL710, we need to use our local copies
+ **/
+static u32 i40e_get_tx_pending(struct i40e_ring *ring)
+{
+ u32 ntu = ((ring->next_to_clean <= ring->next_to_use)
+ ? ring->next_to_use
+ : ring->next_to_use + ring->count);
+ return ntu - ring->next_to_clean;
+}
+
+/**
+ * i40e_check_tx_hang - Is there a hang in the Tx queue
+ * @tx_ring: the ring of descriptors
+ **/
+static bool i40e_check_tx_hang(struct i40e_ring *tx_ring)
+{
+ u32 tx_pending = i40e_get_tx_pending(tx_ring);
+ bool ret = false;
+
+ clear_check_for_tx_hang(tx_ring);
+
+ /* Check for a hung queue, but be thorough. This verifies
+ * that a transmit has been completed since the previous
+ * check AND there is at least one packet pending. The
+ * ARMED bit is set to indicate a potential hang. The
+ * bit is cleared if a pause frame is received to remove
+ * false hang detection due to PFC or 802.3x frames. By
+ * requiring this to fail twice we avoid races with
+ * PFC clearing the ARMED bit and conditions where we
+ * run the check_tx_hang logic with a transmit completion
+ * pending but without time to complete it yet.
+ */
+ if ((tx_ring->tx_stats.tx_done_old == tx_ring->tx_stats.packets) &&
+ tx_pending) {
+ /* make sure it is true for two checks in a row */
+ ret = test_and_set_bit(__I40E_HANG_CHECK_ARMED,
+ &tx_ring->state);
+ } else {
+ /* update completed stats and disarm the hang check */
+ tx_ring->tx_stats.tx_done_old = tx_ring->tx_stats.packets;
+ clear_bit(__I40E_HANG_CHECK_ARMED, &tx_ring->state);
+ }
+
+ return ret;
+}
+
+/**
+ * i40e_clean_tx_irq - Reclaim resources after transmit completes
+ * @tx_ring: tx ring to clean
+ * @budget: how many cleans we're allowed
+ *
+ * Returns true if there's any budget left (e.g. the clean is finished)
+ **/
+static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
+{
+ u16 i = tx_ring->next_to_clean;
+ struct i40e_tx_buffer *tx_buf;
+ struct i40e_tx_desc *tx_desc;
+ unsigned int total_packets = 0;
+ unsigned int total_bytes = 0;
+
+ tx_buf = &tx_ring->tx_bi[i];
+ tx_desc = I40E_TX_DESC(tx_ring, i);
+
+ for (; budget; budget--) {
+ struct i40e_tx_desc *eop_desc;
+
+ eop_desc = tx_buf->next_to_watch;
+
+ /* if next_to_watch is not set then there is no work pending */
+ if (!eop_desc)
+ break;
+
+ /* if the descriptor isn't done, no work yet to do */
+ if (!(eop_desc->cmd_type_offset_bsz &
+ cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
+ break;
+
+ /* count the packet as being completed */
+ tx_ring->tx_stats.completed++;
+ tx_buf->next_to_watch = NULL;
+ tx_buf->time_stamp = 0;
+
+ /* set memory barrier before eop_desc is verified */
+ rmb();
+
+ do {
+ i40e_unmap_tx_resource(tx_ring, tx_buf);
+
+ /* clear dtype status */
+ tx_desc->cmd_type_offset_bsz &=
+ ~cpu_to_le64(I40E_TXD_QW1_DTYPE_MASK);
+
+ if (likely(tx_desc == eop_desc)) {
+ eop_desc = NULL;
+
+ dev_kfree_skb_any(tx_buf->skb);
+ tx_buf->skb = NULL;
+
+ total_bytes += tx_buf->bytecount;
+ total_packets += tx_buf->gso_segs;
+ }
+
+ tx_buf++;
+ tx_desc++;
+ i++;
+ if (unlikely(i == tx_ring->count)) {
+ i = 0;
+ tx_buf = tx_ring->tx_bi;
+ tx_desc = I40E_TX_DESC(tx_ring, 0);
+ }
+ } while (eop_desc);
+ }
+
+ tx_ring->next_to_clean = i;
+ tx_ring->tx_stats.bytes += total_bytes;
+ tx_ring->tx_stats.packets += total_packets;
+ tx_ring->q_vector->tx.total_bytes += total_bytes;
+ tx_ring->q_vector->tx.total_packets += total_packets;
+ if (check_for_tx_hang(tx_ring) && i40e_check_tx_hang(tx_ring)) {
+ /* schedule immediate reset if we believe we hung */
+ dev_info(tx_ring->dev, "Detected Tx Unit Hang\n"
+ " VSI <%d>\n"
+ " Tx Queue <%d>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n",
+ tx_ring->vsi->seid,
+ tx_ring->queue_index,
+ tx_ring->next_to_use, i);
+ dev_info(tx_ring->dev, "tx_bi[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " jiffies <%lx>\n",
+ tx_ring->tx_bi[i].time_stamp, jiffies);
+
+ netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+ dev_info(tx_ring->dev,
+ "tx hang detected on queue %d, resetting adapter\n",
+ tx_ring->queue_index);
+
+ tx_ring->netdev->netdev_ops->ndo_tx_timeout(tx_ring->netdev);
+
+ /* the adapter is about to reset, no point in enabling stuff */
+ return true;
+ }
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+ if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
+ (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(tx_ring->netdev,
+ tx_ring->queue_index) &&
+ !test_bit(__I40E_DOWN, &tx_ring->vsi->state)) {
+ netif_wake_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+ ++tx_ring->tx_stats.restart_queue;
+ }
+ }
+
+ return budget > 0;
+}
+
+/**
+ * i40e_set_new_dynamic_itr - Find new ITR level
+ * @rc: structure containing ring performance data
+ *
+ * Stores a new ITR value based on packets and byte counts during
+ * the last interrupt. The advantage of per interrupt computation
+ * is faster updates and more accurate ITR for the current traffic
+ * pattern. Constants in this function were computed based on
+ * theoretical maximum wire speed and thresholds were set based on
+ * testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ **/
+static void i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
+{
+ enum i40e_latency_range new_latency_range = rc->latency_range;
+ u32 new_itr = rc->itr;
+ int bytes_per_int;
+
+ if (rc->total_packets == 0 || !rc->itr)
+ return;
+
+ /* simple throttlerate management
+ * 0-10MB/s lowest (100000 ints/s)
+ * 10-20MB/s low (20000 ints/s)
+ * 20-1249MB/s bulk (8000 ints/s)
+ */
+ bytes_per_int = rc->total_bytes / rc->itr;
+ switch (rc->itr) {
+ case I40E_LOWEST_LATENCY:
+ if (bytes_per_int > 10)
+ new_latency_range = I40E_LOW_LATENCY;
+ break;
+ case I40E_LOW_LATENCY:
+ if (bytes_per_int > 20)
+ new_latency_range = I40E_BULK_LATENCY;
+ else if (bytes_per_int <= 10)
+ new_latency_range = I40E_LOWEST_LATENCY;
+ break;
+ case I40E_BULK_LATENCY:
+ if (bytes_per_int <= 20)
+ rc->latency_range = I40E_LOW_LATENCY;
+ break;
+ }
+
+ switch (new_latency_range) {
+ case I40E_LOWEST_LATENCY:
+ new_itr = I40E_ITR_100K;
+ break;
+ case I40E_LOW_LATENCY:
+ new_itr = I40E_ITR_20K;
+ break;
+ case I40E_BULK_LATENCY:
+ new_itr = I40E_ITR_8K;
+ break;
+ default:
+ break;
+ }
+
+ if (new_itr != rc->itr) {
+ /* do an exponential smoothing */
+ new_itr = (10 * new_itr * rc->itr) /
+ ((9 * new_itr) + rc->itr);
+ rc->itr = new_itr & I40E_MAX_ITR;
+ }
+
+ rc->total_bytes = 0;
+ rc->total_packets = 0;
+}
+
+/**
+ * i40e_update_dynamic_itr - Adjust ITR based on bytes per int
+ * @q_vector: the vector to adjust
+ **/
+static void i40e_update_dynamic_itr(struct i40e_q_vector *q_vector)
+{
+ u16 vector = q_vector->vsi->base_vector + q_vector->v_idx;
+ struct i40e_hw *hw = &q_vector->vsi->back->hw;
+ u32 reg_addr;
+ u16 old_itr;
+
+ reg_addr = I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1);
+ old_itr = q_vector->rx.itr;
+ i40e_set_new_dynamic_itr(&q_vector->rx);
+ if (old_itr != q_vector->rx.itr)
+ wr32(hw, reg_addr, q_vector->rx.itr);
+
+ reg_addr = I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1);
+ old_itr = q_vector->tx.itr;
+ i40e_set_new_dynamic_itr(&q_vector->tx);
+ if (old_itr != q_vector->tx.itr)
+ wr32(hw, reg_addr, q_vector->tx.itr);
+
+ i40e_flush(hw);
+}
+
+/**
+ * i40e_clean_programming_status - clean the programming status descriptor
+ * @rx_ring: the rx ring that has this descriptor
+ * @rx_desc: the rx descriptor written back by HW
+ *
+ * Flow director should handle FD_FILTER_STATUS to check its filter programming
+ * status being successful or not and take actions accordingly. FCoE should
+ * handle its context/filter programming/invalidation status and take actions.
+ *
+ **/
+static void i40e_clean_programming_status(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc)
+{
+ u64 qw;
+ u8 id;
+
+ qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ id = (qw & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >>
+ I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT;
+
+ if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS)
+ i40e_fd_handle_status(rx_ring, qw, id);
+}
+
+/**
+ * i40e_setup_tx_descriptors - Allocate the Tx descriptors
+ * @tx_ring: the tx ring to set up
+ *
+ * Return 0 on success, negative on error
+ **/
+int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
+{
+ struct device *dev = tx_ring->dev;
+ int bi_size;
+
+ if (!dev)
+ return -ENOMEM;
+
+ bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
+ tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL);
+ if (!tx_ring->tx_bi)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+ tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc) {
+ dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n",
+ tx_ring->size);
+ goto err;
+ }
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ return 0;
+
+err:
+ kfree(tx_ring->tx_bi);
+ tx_ring->tx_bi = NULL;
+ return -ENOMEM;
+}
+
+/**
+ * i40e_clean_rx_ring - Free Rx buffers
+ * @rx_ring: ring to be cleaned
+ **/
+void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ struct i40e_rx_buffer *rx_bi;
+ unsigned long bi_size;
+ u16 i;
+
+ /* ring already cleared, nothing to do */
+ if (!rx_ring->rx_bi)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ rx_bi = &rx_ring->rx_bi[i];
+ if (rx_bi->dma) {
+ dma_unmap_single(dev,
+ rx_bi->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ rx_bi->dma = 0;
+ }
+ if (rx_bi->skb) {
+ dev_kfree_skb(rx_bi->skb);
+ rx_bi->skb = NULL;
+ }
+ if (rx_bi->page) {
+ if (rx_bi->page_dma) {
+ dma_unmap_page(dev,
+ rx_bi->page_dma,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ rx_bi->page_dma = 0;
+ }
+ __free_page(rx_bi->page);
+ rx_bi->page = NULL;
+ rx_bi->page_offset = 0;
+ }
+ }
+
+ bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count;
+ memset(rx_ring->rx_bi, 0, bi_size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+}
+
+/**
+ * i40e_free_rx_resources - Free Rx resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void i40e_free_rx_resources(struct i40e_ring *rx_ring)
+{
+ i40e_clean_rx_ring(rx_ring);
+ kfree(rx_ring->rx_bi);
+ rx_ring->rx_bi = NULL;
+
+ if (rx_ring->desc) {
+ dma_free_coherent(rx_ring->dev, rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
+ rx_ring->desc = NULL;
+ }
+}
+
+/**
+ * i40e_setup_rx_descriptors - Allocate Rx descriptors
+ * @rx_ring: Rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ int bi_size;
+
+ bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count;
+ rx_ring->rx_bi = kzalloc(bi_size, GFP_KERNEL);
+ if (!rx_ring->rx_bi)
+ goto err;
+
+ /* Round up to nearest 4K */
+ rx_ring->size = ring_is_16byte_desc_enabled(rx_ring)
+ ? rx_ring->count * sizeof(union i40e_16byte_rx_desc)
+ : rx_ring->count * sizeof(union i40e_32byte_rx_desc);
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+ rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+
+ if (!rx_ring->desc) {
+ dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n",
+ rx_ring->size);
+ goto err;
+ }
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+err:
+ kfree(rx_ring->rx_bi);
+ rx_ring->rx_bi = NULL;
+ return -ENOMEM;
+}
+
+/**
+ * i40e_release_rx_desc - Store the new tail and head values
+ * @rx_ring: ring to bump
+ * @val: new head index
+ **/
+static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
+{
+ rx_ring->next_to_use = val;
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(val, rx_ring->tail);
+}
+
+/**
+ * i40e_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @rx_ring: ring to place buffers on
+ * @cleaned_count: number of buffers to replace
+ **/
+void i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
+{
+ u16 i = rx_ring->next_to_use;
+ union i40e_rx_desc *rx_desc;
+ struct i40e_rx_buffer *bi;
+ struct sk_buff *skb;
+
+ /* do nothing if no valid netdev defined */
+ if (!rx_ring->netdev || !cleaned_count)
+ return;
+
+ while (cleaned_count--) {
+ rx_desc = I40E_RX_DESC(rx_ring, i);
+ bi = &rx_ring->rx_bi[i];
+ skb = bi->skb;
+
+ if (!skb) {
+ skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+ rx_ring->rx_buf_len);
+ if (!skb) {
+ rx_ring->rx_stats.alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ /* initialize queue mapping */
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+ bi->skb = skb;
+ }
+
+ if (!bi->dma) {
+ bi->dma = dma_map_single(rx_ring->dev,
+ skb->data,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->dev, bi->dma)) {
+ rx_ring->rx_stats.alloc_rx_buff_failed++;
+ bi->dma = 0;
+ goto no_buffers;
+ }
+ }
+
+ if (ring_is_ps_enabled(rx_ring)) {
+ if (!bi->page) {
+ bi->page = alloc_page(GFP_ATOMIC);
+ if (!bi->page) {
+ rx_ring->rx_stats.alloc_rx_page_failed++;
+ goto no_buffers;
+ }
+ }
+
+ if (!bi->page_dma) {
+ /* use a half page if we're re-using */
+ bi->page_offset ^= PAGE_SIZE / 2;
+ bi->page_dma = dma_map_page(rx_ring->dev,
+ bi->page,
+ bi->page_offset,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->dev,
+ bi->page_dma)) {
+ rx_ring->rx_stats.alloc_rx_page_failed++;
+ bi->page_dma = 0;
+ goto no_buffers;
+ }
+ }
+
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info.
+ */
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
+ } else {
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
+ rx_desc->read.hdr_addr = 0;
+ }
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i)
+ i40e_release_rx_desc(rx_ring, i);
+}
+
+/**
+ * i40e_receive_skb - Send a completed packet up the stack
+ * @rx_ring: rx ring in play
+ * @skb: packet to send up
+ * @vlan_tag: vlan tag for packet
+ **/
+static void i40e_receive_skb(struct i40e_ring *rx_ring,
+ struct sk_buff *skb, u16 vlan_tag)
+{
+ struct i40e_q_vector *q_vector = rx_ring->q_vector;
+ struct i40e_vsi *vsi = rx_ring->vsi;
+ u64 flags = vsi->back->flags;
+
+ if (vlan_tag & VLAN_VID_MASK)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
+
+ if (flags & I40E_FLAG_IN_NETPOLL)
+ netif_rx(skb);
+ else
+ napi_gro_receive(&q_vector->napi, skb);
+}
+
+/**
+ * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum
+ * @vsi: the VSI we care about
+ * @skb: skb currently being received and modified
+ * @rx_status: status value of last descriptor in packet
+ * @rx_error: error value of last descriptor in packet
+ **/
+static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
+ struct sk_buff *skb,
+ u32 rx_status,
+ u32 rx_error)
+{
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Rx csum enabled and ip headers found? */
+ if (!(vsi->netdev->features & NETIF_F_RXCSUM &&
+ rx_status & (1 << I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
+ return;
+
+ /* IP or L4 checksum error */
+ if (rx_error & ((1 << I40E_RX_DESC_ERROR_IPE_SHIFT) |
+ (1 << I40E_RX_DESC_ERROR_L4E_SHIFT))) {
+ vsi->back->hw_csum_rx_error++;
+ return;
+ }
+
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+/**
+ * i40e_rx_hash - returns the hash value from the Rx descriptor
+ * @ring: descriptor ring
+ * @rx_desc: specific descriptor
+ **/
+static inline u32 i40e_rx_hash(struct i40e_ring *ring,
+ union i40e_rx_desc *rx_desc)
+{
+ if (ring->netdev->features & NETIF_F_RXHASH) {
+ if ((le64_to_cpu(rx_desc->wb.qword1.status_error_len) >>
+ I40E_RX_DESC_STATUS_FLTSTAT_SHIFT) &
+ I40E_RX_DESC_FLTSTAT_RSS_HASH)
+ return le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss);
+ }
+ return 0;
+}
+
+/**
+ * i40e_clean_rx_irq - Reclaim resources after receive completes
+ * @rx_ring: rx ring to clean
+ * @budget: how many cleans we're allowed
+ *
+ * Returns true if there's any budget left (e.g. the clean is finished)
+ **/
+static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
+{
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+ u16 rx_packet_len, rx_header_len, rx_sph, rx_hbo;
+ u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
+ const int current_node = numa_node_id();
+ struct i40e_vsi *vsi = rx_ring->vsi;
+ u16 i = rx_ring->next_to_clean;
+ union i40e_rx_desc *rx_desc;
+ u32 rx_error, rx_status;
+ u64 qword;
+
+ rx_desc = I40E_RX_DESC(rx_ring, i);
+ qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ rx_status = (qword & I40E_RXD_QW1_STATUS_MASK)
+ >> I40E_RXD_QW1_STATUS_SHIFT;
+
+ while (rx_status & (1 << I40E_RX_DESC_STATUS_DD_SHIFT)) {
+ union i40e_rx_desc *next_rxd;
+ struct i40e_rx_buffer *rx_bi;
+ struct sk_buff *skb;
+ u16 vlan_tag;
+ if (i40e_rx_is_programming_status(qword)) {
+ i40e_clean_programming_status(rx_ring, rx_desc);
+ I40E_RX_NEXT_DESC_PREFETCH(rx_ring, i, next_rxd);
+ goto next_desc;
+ }
+ rx_bi = &rx_ring->rx_bi[i];
+ skb = rx_bi->skb;
+ prefetch(skb->data);
+
+ rx_packet_len = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK)
+ >> I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
+ rx_header_len = (qword & I40E_RXD_QW1_LENGTH_HBUF_MASK)
+ >> I40E_RXD_QW1_LENGTH_HBUF_SHIFT;
+ rx_sph = (qword & I40E_RXD_QW1_LENGTH_SPH_MASK)
+ >> I40E_RXD_QW1_LENGTH_SPH_SHIFT;
+
+ rx_error = (qword & I40E_RXD_QW1_ERROR_MASK)
+ >> I40E_RXD_QW1_ERROR_SHIFT;
+ rx_hbo = rx_error & (1 << I40E_RX_DESC_ERROR_HBO_SHIFT);
+ rx_error &= ~(1 << I40E_RX_DESC_ERROR_HBO_SHIFT);
+
+ rx_bi->skb = NULL;
+
+ /* This memory barrier is needed to keep us from reading
+ * any other fields out of the rx_desc until we know the
+ * STATUS_DD bit is set
+ */
+ rmb();
+
+ /* Get the header and possibly the whole packet
+ * If this is an skb from previous receive dma will be 0
+ */
+ if (rx_bi->dma) {
+ u16 len;
+
+ if (rx_hbo)
+ len = I40E_RX_HDR_SIZE;
+ else if (rx_sph)
+ len = rx_header_len;
+ else if (rx_packet_len)
+ len = rx_packet_len; /* 1buf/no split found */
+ else
+ len = rx_header_len; /* split always mode */
+
+ skb_put(skb, len);
+ dma_unmap_single(rx_ring->dev,
+ rx_bi->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ rx_bi->dma = 0;
+ }
+
+ /* Get the rest of the data if this was a header split */
+ if (ring_is_ps_enabled(rx_ring) && rx_packet_len) {
+
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+ rx_bi->page,
+ rx_bi->page_offset,
+ rx_packet_len);
+
+ skb->len += rx_packet_len;
+ skb->data_len += rx_packet_len;
+ skb->truesize += rx_packet_len;
+
+ if ((page_count(rx_bi->page) == 1) &&
+ (page_to_nid(rx_bi->page) == current_node))
+ get_page(rx_bi->page);
+ else
+ rx_bi->page = NULL;
+
+ dma_unmap_page(rx_ring->dev,
+ rx_bi->page_dma,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ rx_bi->page_dma = 0;
+ }
+ I40E_RX_NEXT_DESC_PREFETCH(rx_ring, i, next_rxd);
+
+ if (unlikely(
+ !(rx_status & (1 << I40E_RX_DESC_STATUS_EOF_SHIFT)))) {
+ struct i40e_rx_buffer *next_buffer;
+
+ next_buffer = &rx_ring->rx_bi[i];
+
+ if (ring_is_ps_enabled(rx_ring)) {
+ rx_bi->skb = next_buffer->skb;
+ rx_bi->dma = next_buffer->dma;
+ next_buffer->skb = skb;
+ next_buffer->dma = 0;
+ }
+ rx_ring->rx_stats.non_eop_descs++;
+ goto next_desc;
+ }
+
+ /* ERR_MASK will only have valid bits if EOP set */
+ if (unlikely(rx_error & (1 << I40E_RX_DESC_ERROR_RXE_SHIFT))) {
+ dev_kfree_skb_any(skb);
+ goto next_desc;
+ }
+
+ skb->rxhash = i40e_rx_hash(rx_ring, rx_desc);
+ i40e_rx_checksum(vsi, skb, rx_status, rx_error);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+ vlan_tag = rx_status & (1 << I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)
+ ? le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1)
+ : 0;
+ i40e_receive_skb(rx_ring, skb, vlan_tag);
+
+ rx_ring->netdev->last_rx = jiffies;
+ budget--;
+next_desc:
+ rx_desc->wb.qword1.status_error_len = 0;
+ if (!budget)
+ break;
+
+ cleaned_count++;
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= I40E_RX_BUFFER_WRITE) {
+ i40e_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ rx_status = (qword & I40E_RXD_QW1_STATUS_MASK)
+ >> I40E_RXD_QW1_STATUS_SHIFT;
+ }
+
+ rx_ring->next_to_clean = i;
+ rx_ring->rx_stats.packets += total_rx_packets;
+ rx_ring->rx_stats.bytes += total_rx_bytes;
+ rx_ring->q_vector->rx.total_packets += total_rx_packets;
+ rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
+
+ if (cleaned_count)
+ i40e_alloc_rx_buffers(rx_ring, cleaned_count);
+
+ return budget > 0;
+}
+
+/**
+ * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function will clean all queues associated with a q_vector.
+ *
+ * Returns the amount of work done
+ **/
+int i40e_napi_poll(struct napi_struct *napi, int budget)
+{
+ struct i40e_q_vector *q_vector =
+ container_of(napi, struct i40e_q_vector, napi);
+ struct i40e_vsi *vsi = q_vector->vsi;
+ bool clean_complete = true;
+ int budget_per_ring;
+ int i;
+
+ if (test_bit(__I40E_DOWN, &vsi->state)) {
+ napi_complete(napi);
+ return 0;
+ }
+
+ /* We attempt to distribute budget to each Rx queue fairly, but don't
+ * allow the budget to go below 1 because that would exit polling early.
+ * Since the actual Tx work is minimal, we can give the Tx a larger
+ * budget and be more aggressive about cleaning up the Tx descriptors.
+ */
+ budget_per_ring = max(budget/q_vector->num_ringpairs, 1);
+ for (i = 0; i < q_vector->num_ringpairs; i++) {
+ clean_complete &= i40e_clean_tx_irq(q_vector->tx.ring[i],
+ vsi->work_limit);
+ clean_complete &= i40e_clean_rx_irq(q_vector->rx.ring[i],
+ budget_per_ring);
+ }
+
+ /* If work not completed, return budget and polling will return */
+ if (!clean_complete)
+ return budget;
+
+ /* Work is done so exit the polling mode and re-enable the interrupt */
+ napi_complete(napi);
+ if (ITR_IS_DYNAMIC(vsi->rx_itr_setting) ||
+ ITR_IS_DYNAMIC(vsi->tx_itr_setting))
+ i40e_update_dynamic_itr(q_vector);
+
+ if (!test_bit(__I40E_DOWN, &vsi->state)) {
+ if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
+ i40e_irq_dynamic_enable(vsi,
+ q_vector->v_idx + vsi->base_vector);
+ } else {
+ struct i40e_hw *hw = &vsi->back->hw;
+ /* We re-enable the queue 0 cause, but
+ * don't worry about dynamic_enable
+ * because we left it on for the other
+ * possible interrupts during napi
+ */
+ u32 qval = rd32(hw, I40E_QINT_RQCTL(0));
+ qval |= I40E_QINT_RQCTL_CAUSE_ENA_MASK;
+ wr32(hw, I40E_QINT_RQCTL(0), qval);
+
+ qval = rd32(hw, I40E_QINT_TQCTL(0));
+ qval |= I40E_QINT_TQCTL_CAUSE_ENA_MASK;
+ wr32(hw, I40E_QINT_TQCTL(0), qval);
+ i40e_flush(hw);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_atr - Add a Flow Director ATR filter
+ * @tx_ring: ring to add programming descriptor to
+ * @skb: send buffer
+ * @flags: send flags
+ * @protocol: wire protocol
+ **/
+static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
+ u32 flags, __be16 protocol)
+{
+ struct i40e_filter_program_desc *fdir_desc;
+ struct i40e_pf *pf = tx_ring->vsi->back;
+ union {
+ unsigned char *network;
+ struct iphdr *ipv4;
+ struct ipv6hdr *ipv6;
+ } hdr;
+ struct tcphdr *th;
+ unsigned int hlen;
+ u32 flex_ptype, dtype_cmd;
+
+ /* make sure ATR is enabled */
+ if (!(pf->flags & I40E_FLAG_FDIR_ATR_ENABLED))
+ return;
+
+ /* if sampling is disabled do nothing */
+ if (!tx_ring->atr_sample_rate)
+ return;
+
+ tx_ring->atr_count++;
+
+ /* snag network header to get L4 type and address */
+ hdr.network = skb_network_header(skb);
+
+ /* Currently only IPv4/IPv6 with TCP is supported */
+ if (protocol == htons(ETH_P_IP)) {
+ if (hdr.ipv4->protocol != IPPROTO_TCP)
+ return;
+
+ /* access ihl as a u8 to avoid unaligned access on ia64 */
+ hlen = (hdr.network[0] & 0x0F) << 2;
+ } else if (protocol == htons(ETH_P_IPV6)) {
+ if (hdr.ipv6->nexthdr != IPPROTO_TCP)
+ return;
+
+ hlen = sizeof(struct ipv6hdr);
+ } else {
+ return;
+ }
+
+ th = (struct tcphdr *)(hdr.network + hlen);
+
+ /* sample on all syn/fin packets or once every atr sample rate */
+ if (!th->fin && !th->syn && (tx_ring->atr_count < tx_ring->atr_sample_rate))
+ return;
+
+ tx_ring->atr_count = 0;
+
+ /* grab the next descriptor */
+ fdir_desc = I40E_TX_FDIRDESC(tx_ring, tx_ring->next_to_use);
+ tx_ring->next_to_use++;
+ if (tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+
+ flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
+ I40E_TXD_FLTR_QW0_QINDEX_MASK;
+ flex_ptype |= (protocol == htons(ETH_P_IP)) ?
+ (I40E_FILTER_PCTYPE_NONF_IPV4_TCP <<
+ I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) :
+ (I40E_FILTER_PCTYPE_NONF_IPV6_TCP <<
+ I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);
+
+ flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
+
+ dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
+
+ dtype_cmd |= th->fin ?
+ (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
+ I40E_TXD_FLTR_QW1_PCMD_SHIFT) :
+ (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
+ I40E_TXD_FLTR_QW1_PCMD_SHIFT);
+
+ dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX <<
+ I40E_TXD_FLTR_QW1_DEST_SHIFT;
+
+ dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID <<
+ I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT;
+
+ fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
+ fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
+}
+
+#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
+/**
+ * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW
+ * @skb: send buffer
+ * @tx_ring: ring to send buffer on
+ * @flags: the tx flags to be set
+ *
+ * Checks the skb and set up correspondingly several generic transmit flags
+ * related to VLAN tagging for the HW, such as VLAN, DCB, etc.
+ *
+ * Returns error code indicate the frame should be dropped upon error and the
+ * otherwise returns 0 to indicate the flags has been set properly.
+ **/
+static int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
+ struct i40e_ring *tx_ring,
+ u32 *flags)
+{
+ __be16 protocol = skb->protocol;
+ u32 tx_flags = 0;
+
+ /* if we have a HW VLAN tag being added, default to the HW one */
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= vlan_tx_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= I40E_TX_FLAGS_HW_VLAN;
+ /* else if it is a SW VLAN, check the next protocol and store the tag */
+ } else if (protocol == __constant_htons(ETH_P_8021Q)) {
+ struct vlan_hdr *vhdr, _vhdr;
+ vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
+ if (!vhdr)
+ return -EINVAL;
+
+ protocol = vhdr->h_vlan_encapsulated_proto;
+ tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= I40E_TX_FLAGS_SW_VLAN;
+ }
+
+ /* Insert 802.1p priority into VLAN header */
+ if ((tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED) &&
+ ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) ||
+ (skb->priority != TC_PRIO_CONTROL))) {
+ tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK;
+ tx_flags |= (skb->priority & 0x7) <<
+ I40E_TX_FLAGS_VLAN_PRIO_SHIFT;
+ if (tx_flags & I40E_TX_FLAGS_SW_VLAN) {
+ struct vlan_ethhdr *vhdr;
+ if (skb_header_cloned(skb) &&
+ pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
+ return -ENOMEM;
+ vhdr = (struct vlan_ethhdr *)skb->data;
+ vhdr->h_vlan_TCI = htons(tx_flags >>
+ I40E_TX_FLAGS_VLAN_SHIFT);
+ } else {
+ tx_flags |= I40E_TX_FLAGS_HW_VLAN;
+ }
+ }
+ *flags = tx_flags;
+ return 0;
+}
+
+/**
+ * i40e_tx_csum - is checksum offload requested
+ * @tx_ring: ptr to the ring to send
+ * @skb: ptr to the skb we're sending
+ * @tx_flags: the collected send information
+ * @protocol: the send protocol
+ *
+ * Returns true if checksum offload is requested
+ **/
+static bool i40e_tx_csum(struct i40e_ring *tx_ring, struct sk_buff *skb,
+ u32 tx_flags, __be16 protocol)
+{
+ if ((skb->ip_summed != CHECKSUM_PARTIAL) &&
+ !(tx_flags & I40E_TX_FLAGS_TXSW)) {
+ if (!(tx_flags & I40E_TX_FLAGS_HW_VLAN))
+ return false;
+ }
+
+ return skb->ip_summed == CHECKSUM_PARTIAL;
+}
+
+/**
+ * i40e_tso - set up the tso context descriptor
+ * @tx_ring: ptr to the ring to send
+ * @skb: ptr to the skb we're sending
+ * @tx_flags: the collected send information
+ * @protocol: the send protocol
+ * @hdr_len: ptr to the size of the packet header
+ * @cd_tunneling: ptr to context descriptor bits
+ *
+ * Returns 0 if no TSO can happen, 1 if tso is going, or error
+ **/
+static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
+ u32 tx_flags, __be16 protocol, u8 *hdr_len,
+ u64 *cd_type_cmd_tso_mss, u32 *cd_tunneling)
+{
+ u32 cd_cmd, cd_tso_len, cd_mss;
+ struct tcphdr *tcph;
+ struct iphdr *iph;
+ u32 l4len;
+ int err;
+ struct ipv6hdr *ipv6h;
+
+ if (!skb_is_gso(skb))
+ return 0;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ if (protocol == __constant_htons(ETH_P_IP)) {
+ iph = skb->encapsulation ? inner_ip_hdr(skb) : ip_hdr(skb);
+ tcph = skb->encapsulation ? inner_tcp_hdr(skb) : tcp_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+ 0, IPPROTO_TCP, 0);
+ } else if (skb_is_gso_v6(skb)) {
+
+ ipv6h = skb->encapsulation ? inner_ipv6_hdr(skb)
+ : ipv6_hdr(skb);
+ tcph = skb->encapsulation ? inner_tcp_hdr(skb) : tcp_hdr(skb);
+ ipv6h->payload_len = 0;
+ tcph->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
+ 0, IPPROTO_TCP, 0);
+ }
+
+ l4len = skb->encapsulation ? inner_tcp_hdrlen(skb) : tcp_hdrlen(skb);
+ *hdr_len = (skb->encapsulation
+ ? (skb_inner_transport_header(skb) - skb->data)
+ : skb_transport_offset(skb)) + l4len;
+
+ /* find the field values */
+ cd_cmd = I40E_TX_CTX_DESC_TSO;
+ cd_tso_len = skb->len - *hdr_len;
+ cd_mss = skb_shinfo(skb)->gso_size;
+ *cd_type_cmd_tso_mss |= ((u64)cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT)
+ | ((u64)cd_tso_len
+ << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT)
+ | ((u64)cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT);
+ return 1;
+}
+
+/**
+ * i40e_tx_enable_csum - Enable Tx checksum offloads
+ * @skb: send buffer
+ * @tx_flags: Tx flags currently set
+ * @td_cmd: Tx descriptor command bits to set
+ * @td_offset: Tx descriptor header offsets to set
+ * @cd_tunneling: ptr to context desc bits
+ **/
+static void i40e_tx_enable_csum(struct sk_buff *skb, u32 tx_flags,
+ u32 *td_cmd, u32 *td_offset,
+ struct i40e_ring *tx_ring,
+ u32 *cd_tunneling)
+{
+ struct ipv6hdr *this_ipv6_hdr;
+ unsigned int this_tcp_hdrlen;
+ struct iphdr *this_ip_hdr;
+ u32 network_hdr_len;
+ u8 l4_hdr = 0;
+
+ if (skb->encapsulation) {
+ network_hdr_len = skb_inner_network_header_len(skb);
+ this_ip_hdr = inner_ip_hdr(skb);
+ this_ipv6_hdr = inner_ipv6_hdr(skb);
+ this_tcp_hdrlen = inner_tcp_hdrlen(skb);
+
+ if (tx_flags & I40E_TX_FLAGS_IPV4) {
+
+ if (tx_flags & I40E_TX_FLAGS_TSO) {
+ *cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV4;
+ ip_hdr(skb)->check = 0;
+ } else {
+ *cd_tunneling |=
+ I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
+ }
+ } else if (tx_flags & I40E_TX_FLAGS_IPV6) {
+ if (tx_flags & I40E_TX_FLAGS_TSO) {
+ *cd_tunneling |= I40E_TX_CTX_EXT_IP_IPV6;
+ ip_hdr(skb)->check = 0;
+ } else {
+ *cd_tunneling |=
+ I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
+ }
+ }
+
+ /* Now set the ctx descriptor fields */
+ *cd_tunneling |= (skb_network_header_len(skb) >> 2) <<
+ I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT |
+ I40E_TXD_CTX_UDP_TUNNELING |
+ ((skb_inner_network_offset(skb) -
+ skb_transport_offset(skb)) >> 1) <<
+ I40E_TXD_CTX_QW0_NATLEN_SHIFT;
+
+ } else {
+ network_hdr_len = skb_network_header_len(skb);
+ this_ip_hdr = ip_hdr(skb);
+ this_ipv6_hdr = ipv6_hdr(skb);
+ this_tcp_hdrlen = tcp_hdrlen(skb);
+ }
+
+ /* Enable IP checksum offloads */
+ if (tx_flags & I40E_TX_FLAGS_IPV4) {
+ l4_hdr = this_ip_hdr->protocol;
+ /* the stack computes the IP header already, the only time we
+ * need the hardware to recompute it is in the case of TSO.
+ */
+ if (tx_flags & I40E_TX_FLAGS_TSO) {
+ *td_cmd |= I40E_TX_DESC_CMD_IIPT_IPV4_CSUM;
+ this_ip_hdr->check = 0;
+ } else {
+ *td_cmd |= I40E_TX_DESC_CMD_IIPT_IPV4;
+ }
+ /* Now set the td_offset for IP header length */
+ *td_offset = (network_hdr_len >> 2) <<
+ I40E_TX_DESC_LENGTH_IPLEN_SHIFT;
+ } else if (tx_flags & I40E_TX_FLAGS_IPV6) {
+ l4_hdr = this_ipv6_hdr->nexthdr;
+ *td_cmd |= I40E_TX_DESC_CMD_IIPT_IPV6;
+ /* Now set the td_offset for IP header length */
+ *td_offset = (network_hdr_len >> 2) <<
+ I40E_TX_DESC_LENGTH_IPLEN_SHIFT;
+ }
+ /* words in MACLEN + dwords in IPLEN + dwords in L4Len */
+ *td_offset |= (skb_network_offset(skb) >> 1) <<
+ I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
+
+ /* Enable L4 checksum offloads */
+ switch (l4_hdr) {
+ case IPPROTO_TCP:
+ /* enable checksum offloads */
+ *td_cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP;
+ *td_offset |= (this_tcp_hdrlen >> 2) <<
+ I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
+ break;
+ case IPPROTO_SCTP:
+ /* enable SCTP checksum offload */
+ *td_cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP;
+ *td_offset |= (sizeof(struct sctphdr) >> 2) <<
+ I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
+ break;
+ case IPPROTO_UDP:
+ /* enable UDP checksum offload */
+ *td_cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP;
+ *td_offset |= (sizeof(struct udphdr) >> 2) <<
+ I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * i40e_create_tx_ctx Build the Tx context descriptor
+ * @tx_ring: ring to create the descriptor on
+ * @cd_type_cmd_tso_mss: Quad Word 1
+ * @cd_tunneling: Quad Word 0 - bits 0-31
+ * @cd_l2tag2: Quad Word 0 - bits 32-63
+ **/
+static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
+ const u64 cd_type_cmd_tso_mss,
+ const u32 cd_tunneling, const u32 cd_l2tag2)
+{
+ struct i40e_tx_context_desc *context_desc;
+
+ if (!cd_type_cmd_tso_mss && !cd_tunneling && !cd_l2tag2)
+ return;
+
+ /* grab the next descriptor */
+ context_desc = I40E_TX_CTXTDESC(tx_ring, tx_ring->next_to_use);
+ tx_ring->next_to_use++;
+ if (tx_ring->next_to_use == tx_ring->count)
+ tx_ring->next_to_use = 0;
+
+ /* cpu_to_le32 and assign to struct fields */
+ context_desc->tunneling_params = cpu_to_le32(cd_tunneling);
+ context_desc->l2tag2 = cpu_to_le16(cd_l2tag2);
+ context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss);
+}
+
+/**
+ * i40e_tx_map - Build the Tx descriptor
+ * @tx_ring: ring to send buffer on
+ * @skb: send buffer
+ * @first: first buffer info buffer to use
+ * @tx_flags: collected send information
+ * @hdr_len: size of the packet header
+ * @td_cmd: the command field in the descriptor
+ * @td_offset: offset for checksum or crc
+ **/
+static void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
+ struct i40e_tx_buffer *first, u32 tx_flags,
+ const u8 hdr_len, u32 td_cmd, u32 td_offset)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned int data_len = skb->data_len;
+ unsigned int size = skb_headlen(skb);
+ struct device *dev = tx_ring->dev;
+ u32 paylen = skb->len - hdr_len;
+ u16 i = tx_ring->next_to_use;
+ struct i40e_tx_buffer *tx_bi;
+ struct i40e_tx_desc *tx_desc;
+ u32 buf_offset = 0;
+ u32 td_tag = 0;
+ dma_addr_t dma;
+ u16 gso_segs;
+
+ dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, dma))
+ goto dma_error;
+
+ if (tx_flags & I40E_TX_FLAGS_HW_VLAN) {
+ td_cmd |= I40E_TX_DESC_CMD_IL2TAG1;
+ td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >>
+ I40E_TX_FLAGS_VLAN_SHIFT;
+ }
+
+ tx_desc = I40E_TX_DESC(tx_ring, i);
+ for (;;) {
+ while (size > I40E_MAX_DATA_PER_TXD) {
+ tx_desc->buffer_addr = cpu_to_le64(dma + buf_offset);
+ tx_desc->cmd_type_offset_bsz =
+ build_ctob(td_cmd, td_offset,
+ I40E_MAX_DATA_PER_TXD, td_tag);
+
+ buf_offset += I40E_MAX_DATA_PER_TXD;
+ size -= I40E_MAX_DATA_PER_TXD;
+
+ tx_desc++;
+ i++;
+ if (i == tx_ring->count) {
+ tx_desc = I40E_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ }
+
+ tx_bi = &tx_ring->tx_bi[i];
+ tx_bi->length = buf_offset + size;
+ tx_bi->tx_flags = tx_flags;
+ tx_bi->dma = dma;
+
+ tx_desc->buffer_addr = cpu_to_le64(dma + buf_offset);
+ tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset,
+ size, td_tag);
+
+ if (likely(!data_len))
+ break;
+
+ size = skb_frag_size(frag);
+ data_len -= size;
+ buf_offset = 0;
+ tx_flags |= I40E_TX_FLAGS_MAPPED_AS_PAGE;
+
+ dma = skb_frag_dma_map(dev, frag, 0, size, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, dma))
+ goto dma_error;
+
+ tx_desc++;
+ i++;
+ if (i == tx_ring->count) {
+ tx_desc = I40E_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+
+ frag++;
+ }
+
+ tx_desc->cmd_type_offset_bsz |=
+ cpu_to_le64((u64)I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT);
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ if (tx_flags & (I40E_TX_FLAGS_TSO | I40E_TX_FLAGS_FSO))
+ gso_segs = skb_shinfo(skb)->gso_segs;
+ else
+ gso_segs = 1;
+
+ /* multiply data chunks by size of headers */
+ tx_bi->bytecount = paylen + (gso_segs * hdr_len);
+ tx_bi->gso_segs = gso_segs;
+ tx_bi->skb = skb;
+
+ /* set the timestamp and next to watch values */
+ first->time_stamp = jiffies;
+ first->next_to_watch = tx_desc;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+
+ writel(i, tx_ring->tail);
+ return;
+
+dma_error:
+ dev_info(dev, "TX DMA map failed\n");
+
+ /* clear dma mappings for failed tx_bi map */
+ for (;;) {
+ tx_bi = &tx_ring->tx_bi[i];
+ i40e_unmap_tx_resource(tx_ring, tx_bi);
+ if (tx_bi == first)
+ break;
+ if (i == 0)
+ i = tx_ring->count;
+ i--;
+ }
+
+ dev_kfree_skb_any(skb);
+
+ tx_ring->next_to_use = i;
+}
+
+/**
+ * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions
+ * @tx_ring: the ring to be checked
+ * @size: the size buffer we want to assure is available
+ *
+ * Returns -EBUSY if a stop is needed, else 0
+ **/
+static inline int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
+{
+ netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+ smp_mb();
+
+ /* Check again in a case another CPU has just made room available. */
+ if (likely(I40E_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! - use start_queue because it doesn't call schedule */
+ netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
+ ++tx_ring->tx_stats.restart_queue;
+ return 0;
+}
+
+/**
+ * i40e_maybe_stop_tx - 1st level check for tx stop conditions
+ * @tx_ring: the ring to be checked
+ * @size: the size buffer we want to assure is available
+ *
+ * Returns 0 if stop is not needed
+ **/
+static int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
+{
+ if (likely(I40E_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __i40e_maybe_stop_tx(tx_ring, size);
+}
+
+/**
+ * i40e_xmit_descriptor_count - calculate number of tx descriptors needed
+ * @skb: send buffer
+ * @tx_ring: ring to send buffer on
+ *
+ * Returns number of data descriptors needed for this skb. Returns 0 to indicate
+ * there is not enough descriptors available in this ring since we need at least
+ * one descriptor.
+ **/
+static int i40e_xmit_descriptor_count(struct sk_buff *skb,
+ struct i40e_ring *tx_ring)
+{
+#if PAGE_SIZE > I40E_MAX_DATA_PER_TXD
+ unsigned int f;
+#endif
+ int count = 0;
+
+ /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
+ * + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for context descriptor,
+ * otherwise try next time
+ */
+#if PAGE_SIZE > I40E_MAX_DATA_PER_TXD
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+#else
+ count += skb_shinfo(skb)->nr_frags;
+#endif
+ count += TXD_USE_COUNT(skb_headlen(skb));
+ if (i40e_maybe_stop_tx(tx_ring, count + 3)) {
+ tx_ring->tx_stats.tx_busy++;
+ return 0;
+ }
+ return count;
+}
+
+/**
+ * i40e_xmit_frame_ring - Sends buffer on Tx ring
+ * @skb: send buffer
+ * @tx_ring: ring to send buffer on
+ *
+ * Returns NETDEV_TX_OK if sent, else an error code
+ **/
+static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
+ struct i40e_ring *tx_ring)
+{
+ u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT;
+ u32 cd_tunneling = 0, cd_l2tag2 = 0;
+ struct i40e_tx_buffer *first;
+ u32 td_offset = 0;
+ u32 tx_flags = 0;
+ __be16 protocol;
+ u32 td_cmd = 0;
+ u8 hdr_len = 0;
+ int tso;
+ if (0 == i40e_xmit_descriptor_count(skb, tx_ring))
+ return NETDEV_TX_BUSY;
+
+ /* prepare the xmit flags */
+ if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags))
+ goto out_drop;
+
+ /* obtain protocol of skb */
+ protocol = skb->protocol;
+
+ /* record the location of the first descriptor for this packet */
+ first = &tx_ring->tx_bi[tx_ring->next_to_use];
+
+ /* setup IPv4/IPv6 offloads */
+ if (protocol == __constant_htons(ETH_P_IP))
+ tx_flags |= I40E_TX_FLAGS_IPV4;
+ else if (protocol == __constant_htons(ETH_P_IPV6))
+ tx_flags |= I40E_TX_FLAGS_IPV6;
+
+ tso = i40e_tso(tx_ring, skb, tx_flags, protocol, &hdr_len,
+ &cd_type_cmd_tso_mss, &cd_tunneling);
+
+ if (tso < 0)
+ goto out_drop;
+ else if (tso)
+ tx_flags |= I40E_TX_FLAGS_TSO;
+
+ skb_tx_timestamp(skb);
+
+ /* Always offload the checksum, since it's in the data descriptor */
+ if (i40e_tx_csum(tx_ring, skb, tx_flags, protocol))
+ tx_flags |= I40E_TX_FLAGS_CSUM;
+
+ /* always enable offload insertion */
+ td_cmd |= I40E_TX_DESC_CMD_ICRC;
+
+ if (tx_flags & I40E_TX_FLAGS_CSUM)
+ i40e_tx_enable_csum(skb, tx_flags, &td_cmd, &td_offset,
+ tx_ring, &cd_tunneling);
+
+ i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss,
+ cd_tunneling, cd_l2tag2);
+
+ /* Add Flow Director ATR if it's enabled.
+ *
+ * NOTE: this must always be directly before the data descriptor.
+ */
+ i40e_atr(tx_ring, skb, tx_flags, protocol);
+
+ i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len,
+ td_cmd, td_offset);
+
+ i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+ return NETDEV_TX_OK;
+
+out_drop:
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+/**
+ * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer
+ * @skb: send buffer
+ * @netdev: network interface device structure
+ *
+ * Returns NETDEV_TX_OK if sent, else an error code
+ **/
+netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_ring *tx_ring = &vsi->tx_rings[skb->queue_mapping];
+
+ /* hardware can't handle really short frames, hardware padding works
+ * beyond this point
+ */
+ if (unlikely(skb->len < I40E_MIN_TX_LEN)) {
+ if (skb_pad(skb, I40E_MIN_TX_LEN - skb->len))
+ return NETDEV_TX_OK;
+ skb->len = I40E_MIN_TX_LEN;
+ skb_set_tail_pointer(skb, I40E_MIN_TX_LEN);
+ }
+
+ return i40e_xmit_frame_ring(skb, tx_ring);
+}
--
1.8.3.1
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related
* [net v6 3/8] i40e: driver ethtool core
From: Jeff Kirsher @ 2013-09-06 23:41 UTC (permalink / raw)
To: davem; +Cc: e1000-devel, netdev, Jesse Brandeburg, gospo, sassmann
In-Reply-To: <1378510875-10704-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
This patch contains the ethtool interface and implementation.
The goal in this patch series is minimal functionality while not
including much in the way of "set support."
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
CC: e1000-devel@lists.sourceforge.net
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
v1: this is the initial submittal
v2: changes due to first round of netdev feedback, including:
remove unimplemented ethtool skeleton functions
as per bwh, use better stats naming like tx-N
don't report stats we won't change
remove buggy static variable
don't force n_len
don't double buffer in get_drvinfo
use strlcpy
don't use hacks for old kernels
use some simplifying macros
use rtnl_link_stats64
report correct speeds
v3:
more tabs/spaces fixes
void function needs no return
variable i could be init'd in declaration
v4:
indentation/whitespace fixes
__func__ removal
use tcp flow spec for filter programming
v5:
snprintf
fix speed setting
const'ify
small bug fix for adding filters
v6:
remove double blank lines
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 1450 ++++++++++++++++++++++++
1 file changed, 1450 insertions(+)
create mode 100644 drivers/net/ethernet/intel/i40e/i40e_ethtool.c
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
new file mode 100644
index 0000000..fafd3e5
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -0,0 +1,1450 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+/* ethtool support for i40e */
+
+#include "i40e.h"
+#include "i40e_diag.h"
+
+struct i40e_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define I40E_STAT(_type, _name, _stat) { \
+ .stat_string = _name, \
+ .sizeof_stat = FIELD_SIZEOF(_type, _stat), \
+ .stat_offset = offsetof(_type, _stat) \
+}
+#define I40E_NETDEV_STAT(_net_stat) \
+ I40E_STAT(struct net_device_stats, #_net_stat, _net_stat)
+#define I40E_PF_STAT(_name, _stat) \
+ I40E_STAT(struct i40e_pf, _name, _stat)
+#define I40E_VSI_STAT(_name, _stat) \
+ I40E_STAT(struct i40e_vsi, _name, _stat)
+
+static const struct i40e_stats i40e_gstrings_net_stats[] = {
+ I40E_NETDEV_STAT(rx_packets),
+ I40E_NETDEV_STAT(tx_packets),
+ I40E_NETDEV_STAT(rx_bytes),
+ I40E_NETDEV_STAT(tx_bytes),
+ I40E_NETDEV_STAT(rx_errors),
+ I40E_NETDEV_STAT(tx_errors),
+ I40E_NETDEV_STAT(rx_dropped),
+ I40E_NETDEV_STAT(tx_dropped),
+ I40E_NETDEV_STAT(multicast),
+ I40E_NETDEV_STAT(collisions),
+ I40E_NETDEV_STAT(rx_length_errors),
+ I40E_NETDEV_STAT(rx_crc_errors),
+};
+
+/* These PF_STATs might look like duplicates of some NETDEV_STATs,
+ * but they are separate. This device supports Virtualization, and
+ * as such might have several netdevs supporting VMDq and FCoE going
+ * through a single port. The NETDEV_STATs are for individual netdevs
+ * seen at the top of the stack, and the PF_STATs are for the physical
+ * function at the bottom of the stack hosting those netdevs.
+ *
+ * The PF_STATs are appended to the netdev stats only when ethtool -S
+ * is queried on the base PF netdev, not on the VMDq or FCoE netdev.
+ */
+static struct i40e_stats i40e_gstrings_stats[] = {
+ I40E_PF_STAT("rx_bytes", stats.eth.rx_bytes),
+ I40E_PF_STAT("tx_bytes", stats.eth.tx_bytes),
+ I40E_PF_STAT("rx_errors", stats.eth.rx_errors),
+ I40E_PF_STAT("tx_errors", stats.eth.tx_errors),
+ I40E_PF_STAT("rx_dropped", stats.eth.rx_discards),
+ I40E_PF_STAT("tx_dropped", stats.eth.tx_discards),
+ I40E_PF_STAT("tx_dropped_link_down", stats.tx_dropped_link_down),
+ I40E_PF_STAT("crc_errors", stats.crc_errors),
+ I40E_PF_STAT("illegal_bytes", stats.illegal_bytes),
+ I40E_PF_STAT("mac_local_faults", stats.mac_local_faults),
+ I40E_PF_STAT("mac_remote_faults", stats.mac_remote_faults),
+ I40E_PF_STAT("rx_length_errors", stats.rx_length_errors),
+ I40E_PF_STAT("link_xon_rx", stats.link_xon_rx),
+ I40E_PF_STAT("link_xoff_rx", stats.link_xoff_rx),
+ I40E_PF_STAT("link_xon_tx", stats.link_xon_tx),
+ I40E_PF_STAT("link_xoff_tx", stats.link_xoff_tx),
+ I40E_PF_STAT("rx_size_64", stats.rx_size_64),
+ I40E_PF_STAT("rx_size_127", stats.rx_size_127),
+ I40E_PF_STAT("rx_size_255", stats.rx_size_255),
+ I40E_PF_STAT("rx_size_511", stats.rx_size_511),
+ I40E_PF_STAT("rx_size_1023", stats.rx_size_1023),
+ I40E_PF_STAT("rx_size_1522", stats.rx_size_1522),
+ I40E_PF_STAT("rx_size_big", stats.rx_size_big),
+ I40E_PF_STAT("tx_size_64", stats.tx_size_64),
+ I40E_PF_STAT("tx_size_127", stats.tx_size_127),
+ I40E_PF_STAT("tx_size_255", stats.tx_size_255),
+ I40E_PF_STAT("tx_size_511", stats.tx_size_511),
+ I40E_PF_STAT("tx_size_1023", stats.tx_size_1023),
+ I40E_PF_STAT("tx_size_1522", stats.tx_size_1522),
+ I40E_PF_STAT("tx_size_big", stats.tx_size_big),
+ I40E_PF_STAT("rx_undersize", stats.rx_undersize),
+ I40E_PF_STAT("rx_fragments", stats.rx_fragments),
+ I40E_PF_STAT("rx_oversize", stats.rx_oversize),
+ I40E_PF_STAT("rx_jabber", stats.rx_jabber),
+ I40E_PF_STAT("VF_admin_queue_requests", vf_aq_requests),
+};
+
+#define I40E_QUEUE_STATS_LEN(n) \
+ ((((struct i40e_netdev_priv *)netdev_priv((n)))->vsi->num_queue_pairs + \
+ ((struct i40e_netdev_priv *)netdev_priv((n)))->vsi->num_queue_pairs) * 2)
+#define I40E_GLOBAL_STATS_LEN ARRAY_SIZE(i40e_gstrings_stats)
+#define I40E_NETDEV_STATS_LEN ARRAY_SIZE(i40e_gstrings_net_stats)
+#define I40E_VSI_STATS_LEN(n) (I40E_NETDEV_STATS_LEN + \
+ I40E_QUEUE_STATS_LEN((n)))
+#define I40E_PFC_STATS_LEN ( \
+ (FIELD_SIZEOF(struct i40e_pf, stats.priority_xoff_rx) + \
+ FIELD_SIZEOF(struct i40e_pf, stats.priority_xon_rx) + \
+ FIELD_SIZEOF(struct i40e_pf, stats.priority_xoff_tx) + \
+ FIELD_SIZEOF(struct i40e_pf, stats.priority_xon_tx) + \
+ FIELD_SIZEOF(struct i40e_pf, stats.priority_xon_2_xoff)) \
+ / sizeof(u64))
+#define I40E_PF_STATS_LEN(n) (I40E_GLOBAL_STATS_LEN + \
+ I40E_PFC_STATS_LEN + \
+ I40E_VSI_STATS_LEN((n)))
+
+enum i40e_ethtool_test_id {
+ I40E_ETH_TEST_REG = 0,
+ I40E_ETH_TEST_EEPROM,
+ I40E_ETH_TEST_INTR,
+ I40E_ETH_TEST_LOOPBACK,
+ I40E_ETH_TEST_LINK,
+};
+
+static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)",
+ "Eeprom test (offline)",
+ "Interrupt test (offline)",
+ "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+
+#define I40E_TEST_LEN (sizeof(i40e_gstrings_test) / ETH_GSTRING_LEN)
+
+/**
+ * i40e_get_settings - Get Link Speed and Duplex settings
+ * @netdev: network interface device structure
+ * @ecmd: ethtool command
+ *
+ * Reports speed/duplex settings based on media_type
+ **/
+static int i40e_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+ bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
+ u32 link_speed = hw_link_info->link_speed;
+
+ /* hardware is either in 40G mode or 10G mode
+ * NOTE: this section initializes supported and advertising
+ */
+ switch (hw_link_info->phy_type) {
+ case I40E_PHY_TYPE_40GBASE_CR4:
+ case I40E_PHY_TYPE_40GBASE_CR4_CU:
+ ecmd->supported = SUPPORTED_40000baseCR4_Full;
+ ecmd->advertising = ADVERTISED_40000baseCR4_Full;
+ break;
+ case I40E_PHY_TYPE_40GBASE_KR4:
+ ecmd->supported = SUPPORTED_40000baseKR4_Full;
+ ecmd->advertising = ADVERTISED_40000baseKR4_Full;
+ break;
+ case I40E_PHY_TYPE_40GBASE_SR4:
+ ecmd->supported = SUPPORTED_40000baseSR4_Full;
+ ecmd->advertising = ADVERTISED_40000baseSR4_Full;
+ break;
+ case I40E_PHY_TYPE_40GBASE_LR4:
+ ecmd->supported = SUPPORTED_40000baseLR4_Full;
+ ecmd->advertising = ADVERTISED_40000baseLR4_Full;
+ break;
+ case I40E_PHY_TYPE_10GBASE_KX4:
+ ecmd->supported = SUPPORTED_10000baseKX4_Full;
+ ecmd->advertising = ADVERTISED_10000baseKX4_Full;
+ break;
+ case I40E_PHY_TYPE_10GBASE_KR:
+ ecmd->supported = SUPPORTED_10000baseKR_Full;
+ ecmd->advertising = ADVERTISED_10000baseKR_Full;
+ break;
+ case I40E_PHY_TYPE_10GBASE_T:
+ default:
+ ecmd->supported = SUPPORTED_10000baseT_Full;
+ ecmd->advertising = ADVERTISED_10000baseT_Full;
+ break;
+ }
+
+ /* for now just say autoneg all the time */
+ ecmd->supported |= SUPPORTED_Autoneg;
+
+ if (hw->phy.media_type == I40E_MEDIA_TYPE_BACKPLANE) {
+ ecmd->supported |= SUPPORTED_Backplane;
+ ecmd->advertising |= ADVERTISED_Backplane;
+ ecmd->port = PORT_NONE;
+ } else if (hw->phy.media_type == I40E_MEDIA_TYPE_BASET) {
+ ecmd->supported |= SUPPORTED_TP;
+ ecmd->advertising |= ADVERTISED_TP;
+ ecmd->port = PORT_TP;
+ } else {
+ ecmd->supported |= SUPPORTED_FIBRE;
+ ecmd->advertising |= ADVERTISED_FIBRE;
+ ecmd->port = PORT_FIBRE;
+ }
+
+ ecmd->transceiver = XCVR_EXTERNAL;
+
+ if (link_up) {
+ switch (link_speed) {
+ case I40E_LINK_SPEED_40GB:
+ /* need a SPEED_40000 in ethtool.h */
+ ethtool_cmd_speed_set(ecmd, 40000);
+ break;
+ case I40E_LINK_SPEED_10GB:
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ break;
+ default:
+ break;
+ }
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+ ecmd->duplex = DUPLEX_UNKNOWN;
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_get_pauseparam - Get Flow Control status
+ * Return tx/rx-pause status
+ **/
+static void i40e_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+
+ pause->autoneg =
+ ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
+ AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ pause->rx_pause = 0;
+ pause->tx_pause = 0;
+ if (hw_link_info->an_info & I40E_AQ_LINK_PAUSE_RX)
+ pause->rx_pause = 1;
+ if (hw_link_info->an_info & I40E_AQ_LINK_PAUSE_TX)
+ pause->tx_pause = 1;
+}
+
+static u32 i40e_get_msglevel(struct net_device *netdev)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+
+ return pf->msg_enable;
+}
+
+static void i40e_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+
+ if (I40E_DEBUG_USER & data)
+ pf->hw.debug_mask = data;
+ pf->msg_enable = data;
+}
+
+static int i40e_get_regs_len(struct net_device *netdev)
+{
+ int reg_count = 0;
+ int i;
+
+ for (i = 0; i40e_reg_list[i].offset != 0; i++)
+ reg_count += i40e_reg_list[i].elements;
+
+ return reg_count * sizeof(u32);
+}
+
+static void i40e_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ u32 *reg_buf = p;
+ int i, j, ri;
+ u32 reg;
+
+ /* Tell ethtool which driver-version-specific regs output we have.
+ *
+ * At some point, if we have ethtool doing special formatting of
+ * this data, it will rely on this version number to know how to
+ * interpret things. Hence, this needs to be updated if/when the
+ * diags register table is changed.
+ */
+ regs->version = 1;
+
+ /* loop through the diags reg table for what to print */
+ ri = 0;
+ for (i = 0; i40e_reg_list[i].offset != 0; i++) {
+ for (j = 0; j < i40e_reg_list[i].elements; j++) {
+ reg = i40e_reg_list[i].offset
+ + (j * i40e_reg_list[i].stride);
+ reg_buf[ri++] = rd32(hw, reg);
+ }
+ }
+
+}
+
+static int i40e_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_hw *hw = &np->vsi->back->hw;
+ int first_word, last_word;
+ u16 i, eeprom_len;
+ u16 *eeprom_buff;
+ int ret_val = 0;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_len = last_word - first_word + 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ret_val = i40e_read_nvm_buffer(hw, first_word, &eeprom_len,
+ eeprom_buff);
+ if (eeprom_len == 0) {
+ kfree(eeprom_buff);
+ return -EACCES;
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < eeprom_len; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int i40e_get_eeprom_len(struct net_device *netdev)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_hw *hw = &np->vsi->back->hw;
+
+ return hw->nvm.sr_size * 2;
+}
+
+static void i40e_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+
+ strlcpy(drvinfo->driver, i40e_driver_name, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, i40e_driver_version_str,
+ sizeof(drvinfo->version));
+ strlcpy(drvinfo->fw_version, i40e_fw_version_str(&pf->hw),
+ sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(pf->pdev),
+ sizeof(drvinfo->bus_info));
+}
+
+static void i40e_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+
+ ring->rx_max_pending = I40E_MAX_NUM_DESCRIPTORS;
+ ring->tx_max_pending = I40E_MAX_NUM_DESCRIPTORS;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = vsi->rx_rings[0].count;
+ ring->tx_pending = vsi->tx_rings[0].count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int i40e_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct i40e_ring *tx_rings = NULL, *rx_rings = NULL;
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ u32 new_rx_count, new_tx_count;
+ int i, err = 0;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_tx_count = clamp_t(u32, ring->tx_pending,
+ I40E_MIN_NUM_DESCRIPTORS,
+ I40E_MAX_NUM_DESCRIPTORS);
+ new_tx_count = ALIGN(new_tx_count, I40E_REQ_DESCRIPTOR_MULTIPLE);
+
+ new_rx_count = clamp_t(u32, ring->rx_pending,
+ I40E_MIN_NUM_DESCRIPTORS,
+ I40E_MAX_NUM_DESCRIPTORS);
+ new_rx_count = ALIGN(new_rx_count, I40E_REQ_DESCRIPTOR_MULTIPLE);
+
+ /* if nothing to do return success */
+ if ((new_tx_count == vsi->tx_rings[0].count) &&
+ (new_rx_count == vsi->rx_rings[0].count))
+ return 0;
+
+ while (test_and_set_bit(__I40E_CONFIG_BUSY, &pf->state))
+ usleep_range(1000, 2000);
+
+ if (!netif_running(vsi->netdev)) {
+ /* simple case - set for the next time the netdev is started */
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ vsi->tx_rings[i].count = new_tx_count;
+ vsi->rx_rings[i].count = new_rx_count;
+ }
+ goto done;
+ }
+
+ /* We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the Tx and Rx ring structs.
+ */
+
+ /* alloc updated Tx resources */
+ if (new_tx_count != vsi->tx_rings[0].count) {
+ netdev_info(netdev,
+ "Changing Tx descriptor count from %d to %d.\n",
+ vsi->tx_rings[0].count, new_tx_count);
+ tx_rings = kcalloc(vsi->alloc_queue_pairs,
+ sizeof(struct i40e_ring), GFP_KERNEL);
+ if (!tx_rings) {
+ err = -ENOMEM;
+ goto done;
+ }
+
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ /* clone ring and setup updated count */
+ tx_rings[i] = vsi->tx_rings[i];
+ tx_rings[i].count = new_tx_count;
+ err = i40e_setup_tx_descriptors(&tx_rings[i]);
+ if (err) {
+ while (i) {
+ i--;
+ i40e_free_tx_resources(&tx_rings[i]);
+ }
+ kfree(tx_rings);
+ tx_rings = NULL;
+
+ goto done;
+ }
+ }
+ }
+
+ /* alloc updated Rx resources */
+ if (new_rx_count != vsi->rx_rings[0].count) {
+ netdev_info(netdev,
+ "Changing Rx descriptor count from %d to %d\n",
+ vsi->rx_rings[0].count, new_rx_count);
+ rx_rings = kcalloc(vsi->alloc_queue_pairs,
+ sizeof(struct i40e_ring), GFP_KERNEL);
+ if (!rx_rings) {
+ err = -ENOMEM;
+ goto free_tx;
+ }
+
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ /* clone ring and setup updated count */
+ rx_rings[i] = vsi->rx_rings[i];
+ rx_rings[i].count = new_rx_count;
+ err = i40e_setup_rx_descriptors(&rx_rings[i]);
+ if (err) {
+ while (i) {
+ i--;
+ i40e_free_rx_resources(&rx_rings[i]);
+ }
+ kfree(rx_rings);
+ rx_rings = NULL;
+
+ goto free_tx;
+ }
+ }
+ }
+
+ /* Bring interface down, copy in the new ring info,
+ * then restore the interface
+ */
+ i40e_down(vsi);
+
+ if (tx_rings) {
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ i40e_free_tx_resources(&vsi->tx_rings[i]);
+ vsi->tx_rings[i] = tx_rings[i];
+ }
+ kfree(tx_rings);
+ tx_rings = NULL;
+ }
+
+ if (rx_rings) {
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ i40e_free_rx_resources(&vsi->rx_rings[i]);
+ vsi->rx_rings[i] = rx_rings[i];
+ }
+ kfree(rx_rings);
+ rx_rings = NULL;
+ }
+
+ i40e_up(vsi);
+
+free_tx:
+ /* error cleanup if the Rx allocations failed after getting Tx */
+ if (tx_rings) {
+ for (i = 0; i < vsi->num_queue_pairs; i++)
+ i40e_free_tx_resources(&tx_rings[i]);
+ kfree(tx_rings);
+ tx_rings = NULL;
+ }
+
+done:
+ clear_bit(__I40E_CONFIG_BUSY, &pf->state);
+
+ return err;
+}
+
+static int i40e_get_sset_count(struct net_device *netdev, int sset)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+
+ switch (sset) {
+ case ETH_SS_TEST:
+ return I40E_TEST_LEN;
+ case ETH_SS_STATS:
+ if (vsi == pf->vsi[pf->lan_vsi])
+ return I40E_PF_STATS_LEN(netdev);
+ else
+ return I40E_VSI_STATS_LEN(netdev);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void i40e_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ int i = 0;
+ char *p;
+ int j;
+ struct rtnl_link_stats64 *net_stats = i40e_get_vsi_stats_struct(vsi);
+
+ i40e_update_stats(vsi);
+
+ for (j = 0; j < I40E_NETDEV_STATS_LEN; j++) {
+ p = (char *)net_stats + i40e_gstrings_net_stats[j].stat_offset;
+ data[i++] = (i40e_gstrings_net_stats[j].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < vsi->num_queue_pairs; j++) {
+ data[i++] = vsi->tx_rings[j].tx_stats.packets;
+ data[i++] = vsi->tx_rings[j].tx_stats.bytes;
+ }
+ for (j = 0; j < vsi->num_queue_pairs; j++) {
+ data[i++] = vsi->rx_rings[j].rx_stats.packets;
+ data[i++] = vsi->rx_rings[j].rx_stats.bytes;
+ }
+ if (vsi == pf->vsi[pf->lan_vsi]) {
+ for (j = 0; j < I40E_GLOBAL_STATS_LEN; j++) {
+ p = (char *)pf + i40e_gstrings_stats[j].stat_offset;
+ data[i++] = (i40e_gstrings_stats[j].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < I40E_MAX_USER_PRIORITY; j++) {
+ data[i++] = pf->stats.priority_xon_tx[j];
+ data[i++] = pf->stats.priority_xoff_tx[j];
+ }
+ for (j = 0; j < I40E_MAX_USER_PRIORITY; j++) {
+ data[i++] = pf->stats.priority_xon_rx[j];
+ data[i++] = pf->stats.priority_xoff_rx[j];
+ }
+ for (j = 0; j < I40E_MAX_USER_PRIORITY; j++)
+ data[i++] = pf->stats.priority_xon_2_xoff[j];
+ }
+}
+
+static void i40e_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ char *p = (char *)data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ for (i = 0; i < I40E_TEST_LEN; i++) {
+ memcpy(data, i40e_gstrings_test[i], ETH_GSTRING_LEN);
+ data += ETH_GSTRING_LEN;
+ }
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < I40E_NETDEV_STATS_LEN; i++) {
+ snprintf(p, ETH_GSTRING_LEN, "%s",
+ i40e_gstrings_net_stats[i].stat_string);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ snprintf(p, ETH_GSTRING_LEN, "tx-%u.tx_packets", i);
+ p += ETH_GSTRING_LEN;
+ snprintf(p, ETH_GSTRING_LEN, "tx-%u.tx_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < vsi->num_queue_pairs; i++) {
+ snprintf(p, ETH_GSTRING_LEN, "rx-%u.rx_packets", i);
+ p += ETH_GSTRING_LEN;
+ snprintf(p, ETH_GSTRING_LEN, "rx-%u.rx_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+ if (vsi == pf->vsi[pf->lan_vsi]) {
+ for (i = 0; i < I40E_GLOBAL_STATS_LEN; i++) {
+ snprintf(p, ETH_GSTRING_LEN, "port.%s",
+ i40e_gstrings_stats[i].stat_string);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
+ snprintf(p, ETH_GSTRING_LEN,
+ "port.tx_priority_%u_xon", i);
+ p += ETH_GSTRING_LEN;
+ snprintf(p, ETH_GSTRING_LEN,
+ "port.tx_priority_%u_xoff", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
+ snprintf(p, ETH_GSTRING_LEN,
+ "port.rx_priority_%u_xon", i);
+ p += ETH_GSTRING_LEN;
+ snprintf(p, ETH_GSTRING_LEN,
+ "port.rx_priority_%u_xoff", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
+ snprintf(p, ETH_GSTRING_LEN,
+ "port.rx_priority_%u_xon_2_xoff", i);
+ p += ETH_GSTRING_LEN;
+ }
+ }
+ /* BUG_ON(p - data != I40E_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static int i40e_get_ts_info(struct net_device *dev,
+ struct ethtool_ts_info *info)
+{
+ return ethtool_op_get_ts_info(dev, info);
+}
+
+static int i40e_link_test(struct i40e_pf *pf, u64 *data)
+{
+ bool link_up;
+
+ link_up = i40e_get_link_status(&pf->hw);
+ if (link_up)
+ *data = 0;
+ else
+ *data = 1;
+
+ return *data;
+}
+
+static int i40e_reg_test(struct i40e_pf *pf, u64 *data)
+{
+ i40e_status ret;
+
+ ret = i40e_diag_reg_test(&pf->hw);
+ *data = ret;
+
+ return ret;
+}
+
+static int i40e_eeprom_test(struct i40e_pf *pf, u64 *data)
+{
+ i40e_status ret;
+
+ ret = i40e_diag_eeprom_test(&pf->hw);
+ *data = ret;
+
+ return ret;
+}
+
+static int i40e_intr_test(struct i40e_pf *pf, u64 *data)
+{
+ *data = I40E_ERR_NOT_IMPLEMENTED;
+
+ return *data;
+}
+
+static int i40e_loopback_test(struct i40e_pf *pf, u64 *data)
+{
+ *data = I40E_ERR_NOT_IMPLEMENTED;
+
+ return *data;
+}
+
+static void i40e_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+
+ set_bit(__I40E_TESTING, &pf->state);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ netdev_info(netdev, "offline testing starting\n");
+
+ /* Link test performed before hardware reset
+ * so autoneg doesn't interfere with test result
+ */
+ netdev_info(netdev, "link test starting\n");
+ if (i40e_link_test(pf, &data[I40E_ETH_TEST_LINK]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ netdev_info(netdev, "register test starting\n");
+ if (i40e_reg_test(pf, &data[I40E_ETH_TEST_REG]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ netdev_info(netdev, "eeprom test starting\n");
+ if (i40e_eeprom_test(pf, &data[I40E_ETH_TEST_EEPROM]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ netdev_info(netdev, "interrupt test starting\n");
+ if (i40e_intr_test(pf, &data[I40E_ETH_TEST_INTR]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ netdev_info(netdev, "loopback test starting\n");
+ if (i40e_loopback_test(pf, &data[I40E_ETH_TEST_LOOPBACK]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ } else {
+ netdev_info(netdev, "online test starting\n");
+ /* Online tests */
+ if (i40e_link_test(pf, &data[I40E_ETH_TEST_LINK]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Offline only tests, not run in online; pass by default */
+ data[I40E_ETH_TEST_REG] = 0;
+ data[I40E_ETH_TEST_EEPROM] = 0;
+ data[I40E_ETH_TEST_INTR] = 0;
+ data[I40E_ETH_TEST_LOOPBACK] = 0;
+
+ clear_bit(__I40E_TESTING, &pf->state);
+ }
+}
+
+static void i40e_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+}
+
+static int i40e_nway_reset(struct net_device *netdev)
+{
+ /* restart autonegotiation */
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ i40e_status ret = 0;
+
+ ret = i40e_aq_set_link_restart_an(hw, NULL);
+ if (ret != I40E_SUCCESS)
+ netdev_info(netdev, "link restart failed, aq_err=%d\n",
+ pf->hw.aq.asq_last_status);
+
+ return ret;
+}
+
+static int i40e_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ int blink_freq = 2;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ pf->led_status = i40e_led_get(hw);
+ return blink_freq;
+ case ETHTOOL_ID_ON:
+ i40e_led_set(hw, 0xF);
+ break;
+ case ETHTOOL_ID_OFF:
+ i40e_led_set(hw, 0x0);
+ break;
+ case ETHTOOL_ID_INACTIVE:
+ i40e_led_set(hw, pf->led_status);
+ break;
+ }
+
+ return 0;
+}
+
+/* NOTE: i40e hardware uses a conversion factor of 2 for Interrupt
+ * Throttle Rate (ITR) ie. ITR(1) = 2us ITR(10) = 20 us, and also
+ * 125us (8000 interrupts per second) == ITR(62)
+ */
+
+static int i40e_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+
+ ec->tx_max_coalesced_frames_irq = vsi->work_limit;
+ ec->rx_max_coalesced_frames_irq = vsi->work_limit;
+
+ if (ITR_IS_DYNAMIC(vsi->rx_itr_setting))
+ ec->rx_coalesce_usecs = 1;
+ else
+ ec->rx_coalesce_usecs = vsi->rx_itr_setting;
+
+ if (ITR_IS_DYNAMIC(vsi->tx_itr_setting))
+ ec->tx_coalesce_usecs = 1;
+ else
+ ec->tx_coalesce_usecs = vsi->tx_itr_setting;
+
+ return 0;
+}
+
+static int i40e_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_q_vector *q_vector;
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+ u16 vector;
+ int i;
+
+ if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
+ vsi->work_limit = ec->tx_max_coalesced_frames_irq;
+
+ switch (ec->rx_coalesce_usecs) {
+ case 0:
+ vsi->rx_itr_setting = 0;
+ break;
+ case 1:
+ vsi->rx_itr_setting = (I40E_ITR_DYNAMIC |
+ ITR_REG_TO_USEC(I40E_ITR_RX_DEF));
+ break;
+ default:
+ if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+ (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1)))
+ return -EINVAL;
+ vsi->rx_itr_setting = ec->rx_coalesce_usecs;
+ break;
+ }
+
+ switch (ec->tx_coalesce_usecs) {
+ case 0:
+ vsi->tx_itr_setting = 0;
+ break;
+ case 1:
+ vsi->tx_itr_setting = (I40E_ITR_DYNAMIC |
+ ITR_REG_TO_USEC(I40E_ITR_TX_DEF));
+ break;
+ default:
+ if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) ||
+ (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1)))
+ return -EINVAL;
+ vsi->tx_itr_setting = ec->tx_coalesce_usecs;
+ break;
+ }
+
+ vector = vsi->base_vector;
+ q_vector = vsi->q_vectors;
+ for (i = 0; i < vsi->num_q_vectors; i++, vector++, q_vector++) {
+ q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
+ wr32(hw, I40E_PFINT_ITRN(0, vector - 1), q_vector->rx.itr);
+ q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
+ wr32(hw, I40E_PFINT_ITRN(1, vector - 1), q_vector->tx.itr);
+ i40e_flush(hw);
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_get_rss_hash_opts - Get RSS hash Input Set for each flow type
+ * @pf: pointer to the physical function struct
+ * @cmd: ethtool rxnfc command
+ *
+ * Returns Success if the flow is supported, else Invalid Input.
+ **/
+static int i40e_get_rss_hash_opts(struct i40e_pf *pf, struct ethtool_rxnfc *cmd)
+{
+ cmd->data = 0;
+
+ /* Report default options for RSS on i40e */
+ switch (cmd->flow_type) {
+ case TCP_V4_FLOW:
+ case UDP_V4_FLOW:
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* fall through to add IP fields */
+ case SCTP_V4_FLOW:
+ case AH_ESP_V4_FLOW:
+ case AH_V4_FLOW:
+ case ESP_V4_FLOW:
+ case IPV4_FLOW:
+ cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case TCP_V6_FLOW:
+ case UDP_V6_FLOW:
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* fall through to add IP fields */
+ case SCTP_V6_FLOW:
+ case AH_ESP_V6_FLOW:
+ case AH_V6_FLOW:
+ case ESP_V6_FLOW:
+ case IPV6_FLOW:
+ cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_get_rxnfc - command to get RX flow classification rules
+ * @netdev: network interface device structure
+ * @cmd: ethtool rxnfc command
+ *
+ * Returns Success if the command is supported.
+ **/
+static int i40e_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
+ u32 *rule_locs)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXRINGS:
+ cmd->data = vsi->alloc_queue_pairs;
+ ret = 0;
+ break;
+ case ETHTOOL_GRXFH:
+ ret = i40e_get_rss_hash_opts(pf, cmd);
+ break;
+ case ETHTOOL_GRXCLSRLCNT:
+ ret = 0;
+ break;
+ case ETHTOOL_GRXCLSRULE:
+ ret = 0;
+ break;
+ case ETHTOOL_GRXCLSRLALL:
+ cmd->data = 500;
+ ret = 0;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * i40e_set_rss_hash_opt - Enable/Disable flow types for RSS hash
+ * @pf: pointer to the physical function struct
+ * @cmd: ethtool rxnfc command
+ *
+ * Returns Success if the flow input set is supported.
+ **/
+static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
+{
+ struct i40e_hw *hw = &pf->hw;
+ u64 hena = (u64)rd32(hw, I40E_PFQF_HENA(0)) |
+ ((u64)rd32(hw, I40E_PFQF_HENA(1)) << 32);
+
+ /* RSS does not support anything other than hashing
+ * to queues on src and dst IPs and ports
+ */
+ if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3))
+ return -EINVAL;
+
+ /* We need at least the IP SRC and DEST fields for hashing */
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST))
+ return -EINVAL;
+
+ switch (nfc->flow_type) {
+ case TCP_V4_FLOW:
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ hena &= ~((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_TCP);
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ hena |= ((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_TCP);
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case TCP_V6_FLOW:
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ hena &= ~((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_TCP);
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ hena |= ((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_TCP);
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case UDP_V4_FLOW:
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ hena &=
+ ~(((u64)1 << I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV4));
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ hena |=
+ (((u64)1 << I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV4));
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case UDP_V6_FLOW:
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ hena &=
+ ~(((u64)1 << I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV6));
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ hena |=
+ (((u64)1 << I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP) |
+ ((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV6));
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case AH_ESP_V4_FLOW:
+ case AH_V4_FLOW:
+ case ESP_V4_FLOW:
+ case SCTP_V4_FLOW:
+ if ((nfc->data & RXH_L4_B_0_1) ||
+ (nfc->data & RXH_L4_B_2_3))
+ return -EINVAL;
+ hena |= ((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_OTHER);
+ break;
+ case AH_ESP_V6_FLOW:
+ case AH_V6_FLOW:
+ case ESP_V6_FLOW:
+ case SCTP_V6_FLOW:
+ if ((nfc->data & RXH_L4_B_0_1) ||
+ (nfc->data & RXH_L4_B_2_3))
+ return -EINVAL;
+ hena |= ((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_OTHER);
+ break;
+ case IPV4_FLOW:
+ hena |= ((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) |
+ ((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV4);
+ break;
+ case IPV6_FLOW:
+ hena |= ((u64)1 << I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) |
+ ((u64)1 << I40E_FILTER_PCTYPE_FRAG_IPV6);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wr32(hw, I40E_PFQF_HENA(0), (u32)hena);
+ wr32(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
+ i40e_flush(hw);
+
+ return 0;
+}
+
+#define IP_HEADER_OFFSET 14
+/**
+ * i40e_add_del_fdir_udpv4 - Add/Remove UDPv4 Flow Director filters for
+ * a specific flow spec
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required from the FDir descriptor
+ * @ethtool_rx_flow_spec: the flow spec
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static i40e_status i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
+ struct i40e_fdir_data *fd_data,
+ struct ethtool_rx_flow_spec *fsp, bool add)
+{
+ struct i40e_pf *pf = vsi->back;
+ struct udphdr *udp;
+ struct iphdr *ip;
+ bool err = false;
+ i40e_status ret;
+ int i;
+
+ ip = (struct iphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET);
+ udp = (struct udphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET
+ + sizeof(struct iphdr));
+
+ ip->saddr = fsp->h_u.tcp_ip4_spec.ip4src;
+ ip->daddr = fsp->h_u.tcp_ip4_spec.ip4dst;
+ udp->source = fsp->h_u.tcp_ip4_spec.psrc;
+ udp->dest = fsp->h_u.tcp_ip4_spec.pdst;
+
+ for (i = I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP;
+ i <= I40E_FILTER_PCTYPE_NONF_IPV4_UDP; i++) {
+ fd_data->pctype = i;
+ ret = i40e_program_fdir_filter(fd_data, pf, add);
+
+ if (ret != I40E_SUCCESS) {
+ dev_info(&pf->pdev->dev,
+ "Filter command send failed for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ err = true;
+ } else {
+ dev_info(&pf->pdev->dev,
+ "Filter OK for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ }
+ }
+
+ return err ? -EOPNOTSUPP : I40E_SUCCESS;
+}
+
+/**
+ * i40e_add_del_fdir_tcpv4 - Add/Remove TCPv4 Flow Director filters for
+ * a specific flow spec
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required from the FDir descriptor
+ * @ethtool_rx_flow_spec: the flow spec
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static i40e_status i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
+ struct i40e_fdir_data *fd_data,
+ struct ethtool_rx_flow_spec *fsp, bool add)
+{
+ struct i40e_pf *pf = vsi->back;
+ struct tcphdr *tcp;
+ struct iphdr *ip;
+ bool err = false;
+ i40e_status ret;
+
+ ip = (struct iphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET);
+ tcp = (struct tcphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET
+ + sizeof(struct iphdr));
+
+ ip->daddr = fsp->h_u.tcp_ip4_spec.ip4dst;
+ tcp->dest = fsp->h_u.tcp_ip4_spec.pdst;
+
+ fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN;
+ ret = i40e_program_fdir_filter(fd_data, pf, add);
+
+ if (ret != I40E_SUCCESS) {
+ dev_info(&pf->pdev->dev,
+ "Filter command send failed for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ err = true;
+ } else {
+ dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ }
+
+ ip->saddr = fsp->h_u.tcp_ip4_spec.ip4src;
+ tcp->source = fsp->h_u.tcp_ip4_spec.psrc;
+
+ fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
+
+ ret = i40e_program_fdir_filter(fd_data, pf, add);
+ if (ret != I40E_SUCCESS) {
+ dev_info(&pf->pdev->dev,
+ "Filter command send failed for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ err = true;
+ } else {
+ dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ }
+
+ return err ? -EOPNOTSUPP : I40E_SUCCESS;
+}
+
+/**
+ * i40e_add_del_fdir_sctpv4 - Add/Remove SCTPv4 Flow Director filters for
+ * a specific flow spec
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required from the FDir descriptor
+ * @ethtool_rx_flow_spec: the flow spec
+ * @add: true adds a filter, false removes it
+ *
+ * Returns I40E_SUCCESS if the filters were successfully added or removed
+ **/
+static i40e_status i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi,
+ struct i40e_fdir_data *fd_data,
+ struct ethtool_rx_flow_spec *fsp, bool add)
+{
+ return -EOPNOTSUPP;
+}
+
+/**
+ * i40e_add_del_fdir_ipv4 - Add/Remove IPv4 Flow Director filters for
+ * a specific flow spec
+ * @vsi: pointer to the targeted VSI
+ * @fd_data: the flow director data required for the FDir descriptor
+ * @fsp: the ethtool flow spec
+ * @add: true adds a filter, false removes it
+ *
+ * Returns I40E_SUCCESS if the filters were successfully added or removed
+ **/
+static i40e_status i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
+ struct i40e_fdir_data *fd_data,
+ struct ethtool_rx_flow_spec *fsp, bool add)
+{
+ struct i40e_pf *pf = vsi->back;
+ struct iphdr *ip;
+ bool err = false;
+ i40e_status ret;
+ int i;
+
+ ip = (struct iphdr *)(fd_data->raw_packet + IP_HEADER_OFFSET);
+
+ ip->saddr = fsp->h_u.usr_ip4_spec.ip4src;
+ ip->daddr = fsp->h_u.usr_ip4_spec.ip4dst;
+ ip->protocol = fsp->h_u.usr_ip4_spec.proto;
+
+ for (i = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
+ i <= I40E_FILTER_PCTYPE_FRAG_IPV4; i++) {
+ fd_data->pctype = i;
+ ret = i40e_program_fdir_filter(fd_data, pf, add);
+
+ if (ret != I40E_SUCCESS) {
+ dev_info(&pf->pdev->dev,
+ "Filter command send failed for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ err = true;
+ } else {
+ dev_info(&pf->pdev->dev,
+ "Filter OK for PCTYPE %d (ret = %d)\n",
+ fd_data->pctype, ret);
+ }
+ }
+
+ return err ? -EOPNOTSUPP : I40E_SUCCESS;
+}
+
+/**
+ * i40e_add_del_fdir_ethtool - Add/Remove Flow Director filters for
+ * a specific flow spec based on their protocol
+ * @vsi: pointer to the targeted VSI
+ * @cmd: command to get or set RX flow classification rules
+ * @add: true adds a filter, false removes it
+ *
+ * Returns 0 if the filters were successfully added or removed
+ **/
+static int i40e_add_del_fdir_ethtool(struct i40e_vsi *vsi,
+ struct ethtool_rxnfc *cmd, bool add)
+{
+ struct i40e_fdir_data fd_data;
+ i40e_status ret = -EINVAL;
+ struct i40e_pf *pf;
+ struct ethtool_rx_flow_spec *fsp =
+ (struct ethtool_rx_flow_spec *)&cmd->fs;
+
+ if (!vsi)
+ return -EINVAL;
+
+ pf = vsi->back;
+
+ if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) &&
+ (fsp->ring_cookie >= vsi->num_queue_pairs))
+ return -EINVAL;
+
+ /* Populate the Flow Director that we have at the moment
+ * and allocate the raw packet buffer for the calling functions
+ */
+ fd_data.raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_LOOKUP,
+ GFP_KERNEL);
+
+ if (!fd_data.raw_packet) {
+ dev_info(&pf->pdev->dev, "Could not allocate memory\n");
+ return -ENOMEM;
+ }
+
+ fd_data.q_index = fsp->ring_cookie;
+ fd_data.flex_off = 0;
+ fd_data.pctype = 0;
+ fd_data.dest_vsi = vsi->id;
+ fd_data.dest_ctl = 0;
+ fd_data.fd_status = 0;
+ fd_data.cnt_index = 0;
+ fd_data.fd_id = 0;
+
+ switch (fsp->flow_type & ~FLOW_EXT) {
+ case TCP_V4_FLOW:
+ ret = i40e_add_del_fdir_tcpv4(vsi, &fd_data, fsp, add);
+ break;
+ case UDP_V4_FLOW:
+ ret = i40e_add_del_fdir_udpv4(vsi, &fd_data, fsp, add);
+ break;
+ case SCTP_V4_FLOW:
+ ret = i40e_add_del_fdir_sctpv4(vsi, &fd_data, fsp, add);
+ break;
+ case IPV4_FLOW:
+ ret = i40e_add_del_fdir_ipv4(vsi, &fd_data, fsp, add);
+ break;
+ case IP_USER_FLOW:
+ switch (fsp->h_u.usr_ip4_spec.proto) {
+ case IPPROTO_TCP:
+ ret = i40e_add_del_fdir_tcpv4(vsi, &fd_data, fsp, add);
+ break;
+ case IPPROTO_UDP:
+ ret = i40e_add_del_fdir_udpv4(vsi, &fd_data, fsp, add);
+ break;
+ case IPPROTO_SCTP:
+ ret = i40e_add_del_fdir_sctpv4(vsi, &fd_data, fsp, add);
+ break;
+ default:
+ ret = i40e_add_del_fdir_ipv4(vsi, &fd_data, fsp, add);
+ break;
+ }
+ break;
+ default:
+ dev_info(&pf->pdev->dev, "Could not specify spec type\n");
+ ret = -EINVAL;
+ }
+
+ kfree(fd_data.raw_packet);
+ fd_data.raw_packet = NULL;
+
+ return ret;
+}
+/**
+ * i40e_set_rxnfc - command to set RX flow classification rules
+ * @netdev: network interface device structure
+ * @cmd: ethtool rxnfc command
+ *
+ * Returns Success if the command is supported.
+ **/
+static int i40e_set_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_SRXFH:
+ ret = i40e_set_rss_hash_opt(pf, cmd);
+ break;
+ case ETHTOOL_SRXCLSRLINS:
+ ret = i40e_add_del_fdir_ethtool(vsi, cmd, true);
+ break;
+ case ETHTOOL_SRXCLSRLDEL:
+ ret = i40e_add_del_fdir_ethtool(vsi, cmd, false);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static const struct ethtool_ops i40e_ethtool_ops = {
+ .get_settings = i40e_get_settings,
+ .get_drvinfo = i40e_get_drvinfo,
+ .get_regs_len = i40e_get_regs_len,
+ .get_regs = i40e_get_regs,
+ .nway_reset = i40e_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_wol = i40e_get_wol,
+ .get_eeprom_len = i40e_get_eeprom_len,
+ .get_eeprom = i40e_get_eeprom,
+ .get_ringparam = i40e_get_ringparam,
+ .set_ringparam = i40e_set_ringparam,
+ .get_pauseparam = i40e_get_pauseparam,
+ .get_msglevel = i40e_get_msglevel,
+ .set_msglevel = i40e_set_msglevel,
+ .get_rxnfc = i40e_get_rxnfc,
+ .set_rxnfc = i40e_set_rxnfc,
+ .self_test = i40e_diag_test,
+ .get_strings = i40e_get_strings,
+ .set_phys_id = i40e_set_phys_id,
+ .get_sset_count = i40e_get_sset_count,
+ .get_ethtool_stats = i40e_get_ethtool_stats,
+ .get_coalesce = i40e_get_coalesce,
+ .set_coalesce = i40e_set_coalesce,
+ .get_ts_info = i40e_get_ts_info,
+};
+
+void i40e_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &i40e_ethtool_ops);
+}
--
1.8.3.1
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related
* [net v6 4/8] i40e: driver core headers
From: Jeff Kirsher @ 2013-09-06 23:41 UTC (permalink / raw)
To: davem; +Cc: e1000-devel, netdev, Jesse Brandeburg, gospo, sassmann
In-Reply-To: <1378510875-10704-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
This patch contains the main driver header files, containing
structures and data types specific to the linux driver.
i40e_osdep.h contains some code that helps us adapt our OS agnostic code to
Linux.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
CC: e1000-devel@lists.sourceforge.net
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
v1: this is the initial submittal
v2: address upstream comments
debug print function converted to macro
constification
remove block_tx_timeout debug code
use rtnl_link_stats64
address HIGHDMA and pci_using_dac comments
compile on s390
v3:
minor cleanups
v4:
remove un-necessary externs
whitespace/tabs/bracket fixups
XPS support
v5:
no significant changes
v6:
replace i40e_memset and i40e_memcpy with memset/cpy
remove double blank lines
---
drivers/net/ethernet/intel/i40e/i40e.h | 565 +++++++++++++++++++++++++++
drivers/net/ethernet/intel/i40e/i40e_osdep.h | 82 ++++
drivers/net/ethernet/intel/i40e/i40e_txrx.h | 259 ++++++++++++
3 files changed, 906 insertions(+)
create mode 100644 drivers/net/ethernet/intel/i40e/i40e.h
create mode 100644 drivers/net/ethernet/intel/i40e/i40e_osdep.h
create mode 100644 drivers/net/ethernet/intel/i40e/i40e_txrx.h
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
new file mode 100644
index 0000000..bb638c5
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -0,0 +1,565 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#ifndef _I40E_H_
+#define _I40E_H_
+
+#include <net/tcp.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/pkt_sched.h>
+#include <linux/ipv6.h>
+#include <linux/version.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include "i40e_type.h"
+#include "i40e_prototype.h"
+#include "i40e_virtchnl.h"
+#include "i40e_virtchnl_pf.h"
+#include "i40e_txrx.h"
+
+/* Useful i40e defaults */
+#define I40E_BASE_PF_SEID 16
+#define I40E_BASE_VSI_SEID 512
+#define I40E_BASE_VEB_SEID 288
+#define I40E_MAX_VEB 16
+
+#define I40E_MAX_NUM_DESCRIPTORS 4096
+#define I40E_MAX_REGISTER 0x0038FFFF
+#define I40E_DEFAULT_NUM_DESCRIPTORS 512
+#define I40E_REQ_DESCRIPTOR_MULTIPLE 32
+#define I40E_MIN_NUM_DESCRIPTORS 64
+#define I40E_MIN_MSIX 2
+#define I40E_DEFAULT_NUM_VMDQ_VSI 8 /* max 256 VSIs */
+#define I40E_DEFAULT_QUEUES_PER_VMDQ 2 /* max 16 qps */
+#define I40E_DEFAULT_QUEUES_PER_VF 4
+#define I40E_DEFAULT_QUEUES_PER_TC 1 /* should be a power of 2 */
+#define I40E_FDIR_RING 0
+#define I40E_FDIR_RING_COUNT 32
+#define I40E_MAX_AQ_BUF_SIZE 4096
+#define I40E_AQ_LEN 32
+#define I40E_AQ_WORK_LIMIT 16
+#define I40E_MAX_USER_PRIORITY 8
+#define I40E_DEFAULT_MSG_ENABLE 4
+
+#define I40E_NVM_VERSION_LO_SHIFT 0
+#define I40E_NVM_VERSION_LO_MASK (0xf << I40E_NVM_VERSION_LO_SHIFT)
+#define I40E_NVM_VERSION_MID_SHIFT 4
+#define I40E_NVM_VERSION_MID_MASK (0xff << I40E_NVM_VERSION_MID_SHIFT)
+#define I40E_NVM_VERSION_HI_SHIFT 12
+#define I40E_NVM_VERSION_HI_MASK (0xf << I40E_NVM_VERSION_HI_SHIFT)
+
+/* magic for getting defines into strings */
+#define STRINGIFY(foo) #foo
+#define XSTRINGIFY(bar) STRINGIFY(bar)
+
+#ifndef ARCH_HAS_PREFETCH
+#define prefetch(X)
+#endif
+
+#define I40E_RX_DESC(R, i) \
+ ((ring_is_16byte_desc_enabled(R)) \
+ ? (union i40e_32byte_rx_desc *) \
+ (&(((union i40e_16byte_rx_desc *)((R)->desc))[i])) \
+ : (&(((union i40e_32byte_rx_desc *)((R)->desc))[i])))
+#define I40E_TX_DESC(R, i) \
+ (&(((struct i40e_tx_desc *)((R)->desc))[i]))
+#define I40E_TX_CTXTDESC(R, i) \
+ (&(((struct i40e_tx_context_desc *)((R)->desc))[i]))
+#define I40E_TX_FDIRDESC(R, i) \
+ (&(((struct i40e_filter_program_desc *)((R)->desc))[i]))
+
+/* default to trying for four seconds */
+#define I40E_TRY_LINK_TIMEOUT (4 * HZ)
+
+/* driver state flags */
+enum i40e_state_t {
+ __I40E_TESTING,
+ __I40E_CONFIG_BUSY,
+ __I40E_CONFIG_DONE,
+ __I40E_DOWN,
+ __I40E_NEEDS_RESTART,
+ __I40E_SERVICE_SCHED,
+ __I40E_ADMINQ_EVENT_PENDING,
+ __I40E_MDD_EVENT_PENDING,
+ __I40E_VFLR_EVENT_PENDING,
+ __I40E_RESET_RECOVERY_PENDING,
+ __I40E_RESET_INTR_RECEIVED,
+ __I40E_REINIT_REQUESTED,
+ __I40E_PF_RESET_REQUESTED,
+ __I40E_CORE_RESET_REQUESTED,
+ __I40E_GLOBAL_RESET_REQUESTED,
+ __I40E_FILTER_OVERFLOW_PROMISC,
+};
+
+enum i40e_interrupt_policy {
+ I40E_INTERRUPT_BEST_CASE,
+ I40E_INTERRUPT_MEDIUM,
+ I40E_INTERRUPT_LOWEST
+};
+
+struct i40e_lump_tracking {
+ u16 num_entries;
+ u16 search_hint;
+ u16 list[0];
+#define I40E_PILE_VALID_BIT 0x8000
+};
+
+#define I40E_DEFAULT_ATR_SAMPLE_RATE 20
+#define I40E_FDIR_MAX_RAW_PACKET_LOOKUP 512
+struct i40e_fdir_data {
+ u16 q_index;
+ u8 flex_off;
+ u8 pctype;
+ u16 dest_vsi;
+ u8 dest_ctl;
+ u8 fd_status;
+ u16 cnt_index;
+ u32 fd_id;
+ u8 *raw_packet;
+};
+
+#define I40E_DCB_PRIO_TYPE_STRICT 0
+#define I40E_DCB_PRIO_TYPE_ETS 1
+#define I40E_DCB_STRICT_PRIO_CREDITS 127
+#define I40E_MAX_USER_PRIORITY 8
+/* DCB per TC information data structure */
+struct i40e_tc_info {
+ u16 qoffset; /* Queue offset from base queue */
+ u16 qcount; /* Total Queues */
+ u8 netdev_tc; /* Netdev TC index if netdev associated */
+};
+
+/* TC configuration data structure */
+struct i40e_tc_configuration {
+ u8 numtc; /* Total number of enabled TCs */
+ u8 enabled_tc; /* TC map */
+ struct i40e_tc_info tc_info[I40E_MAX_TRAFFIC_CLASS];
+};
+
+/* struct that defines the Ethernet device */
+struct i40e_pf {
+ struct pci_dev *pdev;
+ struct i40e_hw hw;
+ unsigned long state;
+ unsigned long link_check_timeout;
+ struct msix_entry *msix_entries;
+ u16 num_msix_entries;
+ bool fc_autoneg_status;
+
+ u16 eeprom_version;
+ u16 num_vmdq_vsis; /* num vmdq pools this pf has set up */
+ u16 num_vmdq_qps; /* num queue pairs per vmdq pool */
+ u16 num_vmdq_msix; /* num queue vectors per vmdq pool */
+ u16 num_req_vfs; /* num vfs requested for this vf */
+ u16 num_vf_qps; /* num queue pairs per vf */
+ u16 num_tc_qps; /* num queue pairs per TC */
+ u16 num_lan_qps; /* num lan queues this pf has set up */
+ u16 num_lan_msix; /* num queue vectors for the base pf vsi */
+ u16 rss_size; /* num queues in the RSS array */
+ u16 rss_size_max; /* HW defined max RSS queues */
+ u16 fdir_pf_filter_count; /* num of guaranteed filters for this PF */
+ u8 atr_sample_rate;
+
+ enum i40e_interrupt_policy int_policy;
+ u16 rx_itr_default;
+ u16 tx_itr_default;
+ u16 msg_enable;
+ char misc_int_name[IFNAMSIZ + 9];
+ u16 adminq_work_limit; /* num of admin receive queue desc to process */
+ int service_timer_period;
+ struct timer_list service_timer;
+ struct work_struct service_task;
+
+ u64 flags;
+#define I40E_FLAG_RX_CSUM_ENABLED (u64)(1 << 1)
+#define I40E_FLAG_MSI_ENABLED (u64)(1 << 2)
+#define I40E_FLAG_MSIX_ENABLED (u64)(1 << 3)
+#define I40E_FLAG_RX_1BUF_ENABLED (u64)(1 << 4)
+#define I40E_FLAG_RX_PS_ENABLED (u64)(1 << 5)
+#define I40E_FLAG_RSS_ENABLED (u64)(1 << 6)
+#define I40E_FLAG_MQ_ENABLED (u64)(1 << 7)
+#define I40E_FLAG_VMDQ_ENABLED (u64)(1 << 8)
+#define I40E_FLAG_FDIR_REQUIRES_REINIT (u64)(1 << 9)
+#define I40E_FLAG_NEED_LINK_UPDATE (u64)(1 << 10)
+#define I40E_FLAG_IN_NETPOLL (u64)(1 << 13)
+#define I40E_FLAG_16BYTE_RX_DESC_ENABLED (u64)(1 << 14)
+#define I40E_FLAG_CLEAN_ADMINQ (u64)(1 << 15)
+#define I40E_FLAG_FILTER_SYNC (u64)(1 << 16)
+#define I40E_FLAG_PROCESS_MDD_EVENT (u64)(1 << 18)
+#define I40E_FLAG_PROCESS_VFLR_EVENT (u64)(1 << 19)
+#define I40E_FLAG_SRIOV_ENABLED (u64)(1 << 20)
+#define I40E_FLAG_DCB_ENABLED (u64)(1 << 21)
+#define I40E_FLAG_FDIR_ENABLED (u64)(1 << 22)
+#define I40E_FLAG_FDIR_ATR_ENABLED (u64)(1 << 23)
+#define I40E_FLAG_MFP_ENABLED (u64)(1 << 27)
+
+ u16 num_tx_queues;
+ u16 num_rx_queues;
+
+ bool stat_offsets_loaded;
+ struct i40e_hw_port_stats stats;
+ struct i40e_hw_port_stats stats_offsets;
+ u32 tx_timeout_count;
+ u32 tx_timeout_recovery_level;
+ unsigned long tx_timeout_last_recovery;
+ u32 hw_csum_rx_error;
+ u32 led_status;
+ u16 corer_count; /* Core reset count */
+ u16 globr_count; /* Global reset count */
+ u16 empr_count; /* EMP reset count */
+ u16 pfr_count; /* PF reset count */
+
+ struct mutex switch_mutex;
+ u16 lan_vsi; /* our default LAN VSI */
+ u16 lan_veb; /* initial relay, if exists */
+#define I40E_NO_VEB 0xffff
+#define I40E_NO_VSI 0xffff
+ u16 next_vsi; /* Next unallocated VSI - 0-based! */
+ struct i40e_vsi **vsi;
+ struct i40e_veb *veb[I40E_MAX_VEB];
+
+ struct i40e_lump_tracking *qp_pile;
+ struct i40e_lump_tracking *irq_pile;
+
+ /* switch config info */
+ u16 pf_seid;
+ u16 main_vsi_seid;
+ u16 mac_seid;
+ struct i40e_aqc_get_switch_config_data *sw_config;
+ struct kobject *switch_kobj;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *i40e_dbg_pf;
+#endif /* CONFIG_DEBUG_FS */
+
+ /* sr-iov config info */
+ struct i40e_vf *vf;
+ int num_alloc_vfs; /* actual number of VFs allocated */
+ u32 vf_aq_requests;
+
+ /* DCBx/DCBNL capability for PF that indicates
+ * whether DCBx is managed by firmware or host
+ * based agent (LLDPAD). Also, indicates what
+ * flavor of DCBx protocol (IEEE/CEE) is supported
+ * by the device. For now we're supporting IEEE
+ * mode only.
+ */
+ u16 dcbx_cap;
+
+ u32 fcoe_hmc_filt_num;
+ u32 fcoe_hmc_cntx_num;
+ struct i40e_filter_control_settings filter_settings;
+};
+
+struct i40e_mac_filter {
+ struct list_head list;
+ u8 macaddr[ETH_ALEN];
+#define I40E_VLAN_ANY -1
+ s16 vlan;
+ u8 counter; /* number of instances of this filter */
+ bool is_vf; /* filter belongs to a VF */
+ bool is_netdev; /* filter belongs to a netdev */
+ bool changed; /* filter needs to be sync'd to the HW */
+};
+
+struct i40e_veb {
+ struct i40e_pf *pf;
+ u16 idx;
+ u16 veb_idx; /* index of VEB parent */
+ u16 seid;
+ u16 uplink_seid;
+ u16 stats_idx; /* index of VEB parent */
+ u8 enabled_tc;
+ u16 flags;
+ u16 bw_limit;
+ u8 bw_max_quanta;
+ bool is_abs_credits;
+ u8 bw_tc_share_credits[I40E_MAX_TRAFFIC_CLASS];
+ u16 bw_tc_limit_credits[I40E_MAX_TRAFFIC_CLASS];
+ u8 bw_tc_max_quanta[I40E_MAX_TRAFFIC_CLASS];
+ struct kobject *kobj;
+ bool stat_offsets_loaded;
+ struct i40e_eth_stats stats;
+ struct i40e_eth_stats stats_offsets;
+};
+
+/* struct that defines a VSI, associated with a dev */
+struct i40e_vsi {
+ struct net_device *netdev;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ bool netdev_registered;
+ bool stat_offsets_loaded;
+
+ u32 current_netdev_flags;
+ unsigned long state;
+#define I40E_VSI_FLAG_FILTER_CHANGED (1<<0)
+#define I40E_VSI_FLAG_VEB_OWNER (1<<1)
+ unsigned long flags;
+
+ struct list_head mac_filter_list;
+
+ /* VSI stats */
+ struct rtnl_link_stats64 net_stats;
+ struct rtnl_link_stats64 net_stats_offsets;
+ struct i40e_eth_stats eth_stats;
+ struct i40e_eth_stats eth_stats_offsets;
+ u32 tx_restart;
+ u32 tx_busy;
+ u32 rx_buf_failed;
+ u32 rx_page_failed;
+
+ /* These are arrays of rings, allocated at run-time */
+ struct i40e_ring *rx_rings;
+ struct i40e_ring *tx_rings;
+
+ u16 work_limit;
+ /* high bit set means dynamic, use accessor routines to read/write.
+ * hardware only supports 2us resolution for the ITR registers.
+ * these values always store the USER setting, and must be converted
+ * before programming to a register.
+ */
+ u16 rx_itr_setting;
+ u16 tx_itr_setting;
+
+ u16 max_frame;
+ u16 rx_hdr_len;
+ u16 rx_buf_len;
+ u8 dtype;
+
+ /* List of q_vectors allocated to this VSI */
+ struct i40e_q_vector *q_vectors;
+ int num_q_vectors;
+ int base_vector;
+
+ u16 seid; /* HW index of this VSI (absolute index) */
+ u16 id; /* VSI number */
+ u16 uplink_seid;
+
+ u16 base_queue; /* vsi's first queue in hw array */
+ u16 alloc_queue_pairs; /* Allocated Tx/Rx queues */
+ u16 num_queue_pairs; /* Used tx and rx pairs */
+ u16 num_desc;
+ enum i40e_vsi_type type; /* VSI type, e.g., LAN, FCoE, etc */
+ u16 vf_id; /* Virtual function ID for SRIOV VSIs */
+
+ struct i40e_tc_configuration tc_config;
+ struct i40e_aqc_vsi_properties_data info;
+
+ /* VSI BW limit (absolute across all TCs) */
+ u16 bw_limit; /* VSI BW Limit (0 = disabled) */
+ u8 bw_max_quanta; /* Max Quanta when BW limit is enabled */
+
+ /* Relative TC credits across VSIs */
+ u8 bw_ets_share_credits[I40E_MAX_TRAFFIC_CLASS];
+ /* TC BW limit credits within VSI */
+ u16 bw_ets_limit_credits[I40E_MAX_TRAFFIC_CLASS];
+ /* TC BW limit max quanta within VSI */
+ u8 bw_ets_max_quanta[I40E_MAX_TRAFFIC_CLASS];
+
+ struct i40e_pf *back; /* Backreference to associated PF */
+ u16 idx; /* index in pf->vsi[] */
+ u16 veb_idx; /* index of VEB parent */
+ struct kobject *kobj; /* sysfs object */
+
+ /* VSI specific handlers */
+ irqreturn_t (*irq_handler)(int irq, void *data);
+} ____cacheline_internodealigned_in_smp;
+
+struct i40e_netdev_priv {
+ struct i40e_vsi *vsi;
+};
+
+/* struct that defines an interrupt vector */
+struct i40e_q_vector {
+ struct i40e_vsi *vsi;
+
+ u16 v_idx; /* index in the vsi->q_vector array. */
+ u16 reg_idx; /* register index of the interrupt */
+
+ struct napi_struct napi;
+
+ struct i40e_ring_container rx;
+ struct i40e_ring_container tx;
+
+ u8 num_ringpairs; /* total number of ring pairs in vector */
+
+ char name[IFNAMSIZ + 9];
+ cpumask_t affinity_mask;
+} ____cacheline_internodealigned_in_smp;
+
+/* lan device */
+struct i40e_device {
+ struct list_head list;
+ struct i40e_pf *pf;
+};
+
+/**
+ * i40e_fw_version_str - format the FW and NVM version strings
+ * @hw: ptr to the hardware info
+ **/
+static inline char *i40e_fw_version_str(struct i40e_hw *hw)
+{
+ static char buf[32];
+
+ snprintf(buf, sizeof(buf),
+ "f%d.%d a%d.%d n%02d.%02d.%02d e%08x",
+ hw->aq.fw_maj_ver, hw->aq.fw_min_ver,
+ hw->aq.api_maj_ver, hw->aq.api_min_ver,
+ (hw->nvm.version & I40E_NVM_VERSION_HI_MASK)
+ >> I40E_NVM_VERSION_HI_SHIFT,
+ (hw->nvm.version & I40E_NVM_VERSION_MID_MASK)
+ >> I40E_NVM_VERSION_MID_SHIFT,
+ (hw->nvm.version & I40E_NVM_VERSION_LO_MASK)
+ >> I40E_NVM_VERSION_LO_SHIFT,
+ hw->nvm.eetrack);
+
+ return buf;
+}
+
+/**
+ * i40e_netdev_to_pf: Retrieve the PF struct for given netdev
+ * @netdev: the corresponding netdev
+ *
+ * Return the PF struct for the given netdev
+ **/
+static inline struct i40e_pf *i40e_netdev_to_pf(struct net_device *netdev)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+
+ return vsi->back;
+}
+
+static inline void i40e_vsi_setup_irqhandler(struct i40e_vsi *vsi,
+ irqreturn_t (*irq_handler)(int, void *))
+{
+ vsi->irq_handler = irq_handler;
+}
+
+/**
+ * i40e_rx_is_programming_status - check for programming status descriptor
+ * @qw: the first quad word of the program status descriptor
+ *
+ * The value of in the descriptor length field indicate if this
+ * is a programming status descriptor for flow director or FCoE
+ * by the value of I40E_RX_PROG_STATUS_DESC_LENGTH, otherwise
+ * it is a packet descriptor.
+ **/
+static inline bool i40e_rx_is_programming_status(u64 qw)
+{
+ return I40E_RX_PROG_STATUS_DESC_LENGTH ==
+ (qw >> I40E_RX_PROG_STATUS_DESC_LENGTH_SHIFT);
+}
+
+/* needed by i40e_ethtool.c */
+int i40e_up(struct i40e_vsi *vsi);
+void i40e_down(struct i40e_vsi *vsi);
+extern const char i40e_driver_name[];
+extern const char i40e_driver_version_str[];
+void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags);
+void i40e_update_stats(struct i40e_vsi *vsi);
+void i40e_update_eth_stats(struct i40e_vsi *vsi);
+struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi);
+s32 i40e_fetch_switch_configuration(struct i40e_pf *pf,
+ bool printconfig);
+
+/* needed by i40e_main.c */
+void i40e_add_fdir_filter(struct i40e_fdir_data fdir_data,
+ struct i40e_ring *tx_ring);
+void i40e_add_remove_filter(struct i40e_fdir_data fdir_data,
+ struct i40e_ring *tx_ring);
+void i40e_update_fdir_filter(struct i40e_fdir_data fdir_data,
+ struct i40e_ring *tx_ring);
+i40e_status i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
+ struct i40e_pf *pf, bool add);
+
+void i40e_set_ethtool_ops(struct net_device *netdev);
+struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
+ u8 *macaddr, s16 vlan,
+ bool is_vf, bool is_netdev);
+void i40e_del_filter(struct i40e_vsi *vsi, u8 *macaddr, s16 vlan,
+ bool is_vf, bool is_netdev);
+i40e_status i40e_sync_vsi_filters(struct i40e_vsi *vsi);
+i40e_status __i40e_sync_vsi_filters_locked(struct i40e_vsi *);
+struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
+ u16 uplink, u32 param1);
+s32 i40e_vsi_release(struct i40e_vsi *vsi);
+struct i40e_vsi *i40e_vsi_lookup(struct i40e_pf *pf, enum i40e_vsi_type type,
+ struct i40e_vsi *start_vsi);
+struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags, u16 uplink_seid,
+ u16 downlink_seid, u8 enabled_tc);
+s32 i40e_veb_release(struct i40e_veb *veb);
+
+i40e_status i40e_sys_add_vsi(struct i40e_vsi *vsi);
+void i40e_sys_del_vsi(struct i40e_vsi *vsi);
+i40e_status i40e_sys_add_veb(struct i40e_veb *veb);
+void i40e_sys_del_veb(struct i40e_veb *veb);
+i40e_status i40e_sys_init(struct i40e_pf *pf);
+void i40e_sys_exit(struct i40e_pf *pf);
+i40e_status i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid);
+i40e_status i40e_vsi_remove_pvid(struct i40e_vsi *vsi);
+void i40e_vsi_reset_stats(struct i40e_vsi *vsi);
+void i40e_pf_reset_stats(struct i40e_pf *pf);
+#ifdef CONFIG_DEBUG_FS
+void i40e_dbg_pf_init(struct i40e_pf *pf);
+void i40e_dbg_pf_exit(struct i40e_pf *pf);
+void i40e_dbg_init(void);
+void i40e_dbg_exit(void);
+#else
+static inline void i40e_dbg_pf_init(struct i40e_pf *pf) {}
+static inline void i40e_dbg_pf_exit(struct i40e_pf *pf) {}
+static inline void i40e_dbg_init(void) {}
+static inline void i40e_dbg_exit(void) {}
+#endif /* CONFIG_DEBUG_FS*/
+void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector);
+int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+void i40e_vlan_stripping_disable(struct i40e_vsi *vsi);
+int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid);
+int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid);
+i40e_status i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
+ bool is_vf, bool is_netdev);
+bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi);
+struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, u8 *macaddr,
+ bool is_vf, bool is_netdev);
+void i40e_vlan_stripping_enable(struct i40e_vsi *vsi);
+
+#endif /* _I40E_H_ */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_osdep.h b/drivers/net/ethernet/intel/i40e/i40e_osdep.h
new file mode 100644
index 0000000..702c81b
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_osdep.h
@@ -0,0 +1,82 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#ifndef _I40E_OSDEP_H_
+#define _I40E_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/tcp.h>
+#include <linux/pci.h>
+#include <linux/highuid.h>
+
+/* get readq/writeq support for 32 bit kernels, use the low-first version */
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
+/* File to be the magic between shared code and
+ * actual OS primitives
+ */
+
+#define hw_dbg(hw, S, A...) do {} while (0)
+
+#define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+#define rd32(a, reg) readl((a)->hw_addr + (reg))
+
+#define wr64(a, reg, value) writeq((value), ((a)->hw_addr + (reg)))
+#define rd64(a, reg) readq((a)->hw_addr + (reg))
+#define i40e_flush(a) readl((a)->hw_addr + I40E_GLGEN_STAT)
+
+/* memory allocation tracking */
+struct i40e_dma_mem {
+ void *va;
+ dma_addr_t pa;
+ u32 size;
+} __packed;
+
+#define i40e_allocate_dma_mem(h, m, unused, s, a) \
+ i40e_allocate_dma_mem_d(h, m, s, a)
+#define i40e_free_dma_mem(h, m) i40e_free_dma_mem_d(h, m)
+
+struct i40e_virt_mem {
+ void *va;
+ u32 size;
+} __packed;
+
+#define i40e_allocate_virt_mem(h, m, s) i40e_allocate_virt_mem_d(h, m, s)
+#define i40e_free_virt_mem(h, m) i40e_free_virt_mem_d(h, m)
+
+#define i40e_debug(h, m, s, ...) \
+do { \
+ if (((m) & (h)->debug_mask)) \
+ pr_info("i40e %02x.%x " s, \
+ (h)->bus.device, (h)->bus.func, \
+ ##__VA_ARGS__); \
+} while (0)
+
+typedef enum i40e_status_code i40e_status;
+#endif /* _I40E_OSDEP_H_ */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
new file mode 100644
index 0000000..b1d7722
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -0,0 +1,259 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+/* Interrupt Throttling and Rate Limiting (storm control) Goodies */
+
+#define I40E_MAX_ITR 0x07FF
+#define I40E_MIN_ITR 0x0001
+#define I40E_ITR_USEC_RESOLUTION 2
+#define I40E_MAX_IRATE 0x03F
+#define I40E_MIN_IRATE 0x001
+#define I40E_IRATE_USEC_RESOLUTION 4
+#define I40E_ITR_100K 0x0005
+#define I40E_ITR_20K 0x0019
+#define I40E_ITR_8K 0x003E
+#define I40E_ITR_4K 0x007A
+#define I40E_ITR_RX_DEF I40E_ITR_8K
+#define I40E_ITR_TX_DEF I40E_ITR_4K
+#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
+#define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */
+#define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */
+#define I40E_DEFAULT_IRQ_WORK 256
+#define ITR_TO_REG(setting) ((setting & ~I40E_ITR_DYNAMIC) >> 1)
+#define ITR_IS_DYNAMIC(setting) (!!(setting & I40E_ITR_DYNAMIC))
+#define ITR_REG_TO_USEC(itr_reg) (itr_reg << 1)
+
+#define I40E_QUEUE_END_OF_LIST 0x7FF
+
+#define I40E_ITR_NONE 3
+#define I40E_RX_ITR 0
+#define I40E_TX_ITR 1
+#define I40E_PE_ITR 2
+/* Supported Rx Buffer Sizes */
+#define I40E_RXBUFFER_512 512 /* Used for packet split */
+#define I40E_RXBUFFER_2048 2048
+#define I40E_RXBUFFER_3072 3072 /* For FCoE MTU of 2158 */
+#define I40E_RXBUFFER_4096 4096
+#define I40E_RXBUFFER_8192 8192
+#define I40E_MAX_RXBUFFER 9728 /* largest size for single descriptor */
+
+/* NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
+ * reserve 2 more, and skb_shared_info adds an additional 384 bytes more,
+ * this adds up to 512 bytes of extra data meaning the smallest allocation
+ * we could have is 1K.
+ * i.e. RXBUFFER_512 --> size-1024 slab
+ */
+#define I40E_RX_HDR_SIZE I40E_RXBUFFER_512
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define I40E_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+#define I40E_RX_NEXT_DESC(r, i, n) \
+ do { \
+ (i)++; \
+ if ((i) == (r)->count) \
+ i = 0; \
+ (n) = I40E_RX_DESC((r), (i)); \
+ } while (0)
+
+#define I40E_RX_NEXT_DESC_PREFETCH(r, i, n) \
+ do { \
+ I40E_RX_NEXT_DESC((r), (i), (n)); \
+ prefetch((n)); \
+ } while (0)
+
+#define i40e_rx_desc i40e_32byte_rx_desc
+
+#define I40E_MIN_TX_LEN 17
+#define I40E_MAX_DATA_PER_TXD 16383 /* aka 16kB - 1 */
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), I40E_MAX_DATA_PER_TXD)
+#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4)
+
+#define I40E_TX_FLAGS_CSUM (u32)(1)
+#define I40E_TX_FLAGS_HW_VLAN (u32)(1 << 1)
+#define I40E_TX_FLAGS_SW_VLAN (u32)(1 << 2)
+#define I40E_TX_FLAGS_TSO (u32)(1 << 3)
+#define I40E_TX_FLAGS_IPV4 (u32)(1 << 4)
+#define I40E_TX_FLAGS_IPV6 (u32)(1 << 5)
+#define I40E_TX_FLAGS_FCCRC (u32)(1 << 6)
+#define I40E_TX_FLAGS_FSO (u32)(1 << 7)
+#define I40E_TX_FLAGS_TXSW (u32)(1 << 8)
+#define I40E_TX_FLAGS_MAPPED_AS_PAGE (u32)(1 << 9)
+#define I40E_TX_FLAGS_VLAN_MASK 0xffff0000
+#define I40E_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000
+#define I40E_TX_FLAGS_VLAN_PRIO_SHIFT 29
+#define I40E_TX_FLAGS_VLAN_SHIFT 16
+
+struct i40e_tx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u32 tx_flags;
+ struct i40e_tx_desc *next_to_watch;
+ unsigned int bytecount;
+ u16 gso_segs;
+ u8 mapped_as_page;
+};
+
+struct i40e_rx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct page *page;
+ dma_addr_t page_dma;
+ unsigned int page_offset;
+};
+
+struct i40e_tx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 restart_queue;
+ u64 tx_busy;
+ u64 completed;
+ u64 tx_done_old;
+};
+
+struct i40e_rx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 non_eop_descs;
+ u64 alloc_rx_page_failed;
+ u64 alloc_rx_buff_failed;
+};
+
+enum i40e_ring_state_t {
+ __I40E_TX_FDIR_INIT_DONE,
+ __I40E_TX_XPS_INIT_DONE,
+ __I40E_TX_DETECT_HANG,
+ __I40E_HANG_CHECK_ARMED,
+ __I40E_RX_PS_ENABLED,
+ __I40E_RX_LRO_ENABLED,
+ __I40E_RX_16BYTE_DESC_ENABLED,
+};
+
+#define ring_is_ps_enabled(ring) \
+ test_bit(__I40E_RX_PS_ENABLED, &(ring)->state)
+#define set_ring_ps_enabled(ring) \
+ set_bit(__I40E_RX_PS_ENABLED, &(ring)->state)
+#define clear_ring_ps_enabled(ring) \
+ clear_bit(__I40E_RX_PS_ENABLED, &(ring)->state)
+#define check_for_tx_hang(ring) \
+ test_bit(__I40E_TX_DETECT_HANG, &(ring)->state)
+#define set_check_for_tx_hang(ring) \
+ set_bit(__I40E_TX_DETECT_HANG, &(ring)->state)
+#define clear_check_for_tx_hang(ring) \
+ clear_bit(__I40E_TX_DETECT_HANG, &(ring)->state)
+#define ring_is_lro_enabled(ring) \
+ test_bit(__I40E_RX_LRO_ENABLED, &(ring)->state)
+#define set_ring_lro_enabled(ring) \
+ set_bit(__I40E_RX_LRO_ENABLED, &(ring)->state)
+#define clear_ring_lro_enabled(ring) \
+ clear_bit(__I40E_RX_LRO_ENABLED, &(ring)->state)
+#define ring_is_16byte_desc_enabled(ring) \
+ test_bit(__I40E_RX_16BYTE_DESC_ENABLED, &(ring)->state)
+#define set_ring_16byte_desc_enabled(ring) \
+ set_bit(__I40E_RX_16BYTE_DESC_ENABLED, &(ring)->state)
+#define clear_ring_16byte_desc_enabled(ring) \
+ clear_bit(__I40E_RX_16BYTE_DESC_ENABLED, &(ring)->state)
+
+/* struct that defines a descriptor ring, associated with a VSI */
+struct i40e_ring {
+ void *desc; /* Descriptor ring memory */
+ struct device *dev; /* Used for DMA mapping */
+ struct net_device *netdev; /* netdev ring maps to */
+ union {
+ struct i40e_tx_buffer *tx_bi;
+ struct i40e_rx_buffer *rx_bi;
+ };
+ unsigned long state;
+ u16 queue_index; /* Queue number of ring */
+ u8 dcb_tc; /* Traffic class of ring */
+ u8 __iomem *tail;
+
+ u16 count; /* Number of descriptors */
+ u16 reg_idx; /* HW register index of the ring */
+ u16 rx_hdr_len;
+ u16 rx_buf_len;
+ u8 dtype;
+#define I40E_RX_DTYPE_NO_SPLIT 0
+#define I40E_RX_DTYPE_SPLIT_ALWAYS 1
+#define I40E_RX_DTYPE_HEADER_SPLIT 2
+ u8 hsplit;
+#define I40E_RX_SPLIT_L2 0x1
+#define I40E_RX_SPLIT_IP 0x2
+#define I40E_RX_SPLIT_TCP_UDP 0x4
+#define I40E_RX_SPLIT_SCTP 0x8
+
+ /* used in interrupt processing */
+ u16 next_to_use;
+ u16 next_to_clean;
+
+ u8 atr_sample_rate;
+ u8 atr_count;
+
+ bool ring_active; /* is ring online or not */
+
+ /* stats structs */
+ union {
+ struct i40e_tx_queue_stats tx_stats;
+ struct i40e_rx_queue_stats rx_stats;
+ };
+
+ unsigned int size; /* length of descriptor ring in bytes */
+ dma_addr_t dma; /* physical address of ring */
+
+ struct i40e_vsi *vsi; /* Backreference to associated VSI */
+ struct i40e_q_vector *q_vector; /* Backreference to associated vector */
+} ____cacheline_internodealigned_in_smp;
+
+enum i40e_latency_range {
+ I40E_LOWEST_LATENCY = 0,
+ I40E_LOW_LATENCY = 1,
+ I40E_BULK_LATENCY = 2,
+};
+
+struct i40e_ring_container {
+#define I40E_MAX_RINGPAIR_PER_VECTOR 8
+ /* array of pointers to rings */
+ struct i40e_ring *ring[I40E_MAX_RINGPAIR_PER_VECTOR];
+ unsigned int total_bytes; /* total bytes processed this int */
+ unsigned int total_packets; /* total packets processed this int */
+ u16 count;
+ enum i40e_latency_range latency_range;
+ u16 itr;
+};
+
+void i40e_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count);
+netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+void i40e_clean_tx_ring(struct i40e_ring *tx_ring);
+void i40e_clean_rx_ring(struct i40e_ring *rx_ring);
+int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring);
+int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring);
+void i40e_free_tx_resources(struct i40e_ring *tx_ring);
+void i40e_free_rx_resources(struct i40e_ring *rx_ring);
+int i40e_napi_poll(struct napi_struct *napi, int budget);
--
1.8.3.1
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox