* [PATCH 40/51] DMA-API: crypto: fix ixp4xx crypto platform device support
From: Russell King @ 2013-09-19 23:12 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Herbert Xu, David S. Miller
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
Don't statically allocate struct device's in modules, and shut the
warning up with an empty release() function. There's a reason that
warning is there and that's not for people to hide in this way. It's
there to persuade people to use the correct APIs to allocate platform
devices.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/crypto/ixp4xx_crypto.c | 37 +++++++++++++++++--------------------
1 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 21180d6..8306185 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -218,23 +218,10 @@ static dma_addr_t crypt_phys;
static int support_aes = 1;
-static void dev_release(struct device *dev)
-{
- return;
-}
-
#define DRIVER_NAME "ixp4xx_crypto"
-static struct platform_device pseudo_dev = {
- .name = DRIVER_NAME,
- .id = 0,
- .num_resources = 0,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .release = dev_release,
- }
-};
-static struct device *dev = &pseudo_dev.dev;
+static struct platform_device *pdev;
+static struct device *dev;
static inline dma_addr_t crypt_virt2phys(struct crypt_ctl *virt)
{
@@ -1418,20 +1405,30 @@ static struct ixp_alg ixp4xx_algos[] = {
} };
#define IXP_POSTFIX "-ixp4xx"
+
+static const struct platform_device_info ixp_dev_info __initdata = {
+ .name = DRIVER_NAME,
+ .id = 0,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
static int __init ixp_module_init(void)
{
int num = ARRAY_SIZE(ixp4xx_algos);
- int i,err ;
+ int i, err ;
- if (platform_device_register(&pseudo_dev))
- return -ENODEV;
+ pdev = platform_device_register_full(&ixp_dev_info);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ dev = &pdev->dev;
spin_lock_init(&desc_lock);
spin_lock_init(&emerg_lock);
err = init_ixp_crypto();
if (err) {
- platform_device_unregister(&pseudo_dev);
+ platform_device_unregister(pdev);
return err;
}
for (i=0; i< num; i++) {
@@ -1496,7 +1493,7 @@ static void __exit ixp_module_exit(void)
crypto_unregister_alg(&ixp4xx_algos[i].crypto);
}
release_ixp_crypto();
- platform_device_unregister(&pseudo_dev);
+ platform_device_unregister(pdev);
}
module_init(ixp_module_init);
--
1.7.4.4
^ permalink raw reply related
* [PATCH 41/51] DMA-API: crypto: remove last references to 'static struct device *dev'
From: Russell King @ 2013-09-19 23:13 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Herbert Xu, David S. Miller
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/crypto/ixp4xx_crypto.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 8306185..214357e 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -221,7 +221,6 @@ static int support_aes = 1;
#define DRIVER_NAME "ixp4xx_crypto"
static struct platform_device *pdev;
-static struct device *dev;
static inline dma_addr_t crypt_virt2phys(struct crypt_ctl *virt)
{
@@ -250,6 +249,7 @@ static inline const struct ix_hash_algo *ix_hash(struct crypto_tfm *tfm)
static int setup_crypt_desc(void)
{
+ struct device *dev = &pdev->dev;
BUILD_BUG_ON(sizeof(struct crypt_ctl) != 64);
crypt_virt = dma_alloc_coherent(dev,
NPE_QLEN * sizeof(struct crypt_ctl),
@@ -350,6 +350,7 @@ static void finish_scattered_hmac(struct crypt_ctl *crypt)
static void one_packet(dma_addr_t phys)
{
+ struct device *dev = &pdev->dev;
struct crypt_ctl *crypt;
struct ixp_ctx *ctx;
int failed;
@@ -419,7 +420,7 @@ static void crypto_done_action(unsigned long arg)
tasklet_schedule(&crypto_done_tasklet);
}
-static int init_ixp_crypto(void)
+static int init_ixp_crypto(struct device *dev)
{
int ret = -ENODEV;
u32 msg[2] = { 0, 0 };
@@ -506,7 +507,7 @@ static int init_ixp_crypto(void)
return ret;
}
-static void release_ixp_crypto(void)
+static void release_ixp_crypto(struct device *dev)
{
qmgr_disable_irq(RECV_QID);
tasklet_kill(&crypto_done_tasklet);
@@ -873,6 +874,7 @@ static int ablk_perform(struct ablkcipher_request *req, int encrypt)
enum dma_data_direction src_direction = DMA_BIDIRECTIONAL;
struct ablk_ctx *req_ctx = ablkcipher_request_ctx(req);
struct buffer_desc src_hook;
+ struct device *dev = &pdev->dev;
gfp_t flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ?
GFP_KERNEL : GFP_ATOMIC;
@@ -997,6 +999,7 @@ static int aead_perform(struct aead_request *req, int encrypt,
unsigned int cryptlen;
struct buffer_desc *buf, src_hook;
struct aead_ctx *req_ctx = aead_request_ctx(req);
+ struct device *dev = &pdev->dev;
gfp_t flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ?
GFP_KERNEL : GFP_ATOMIC;
@@ -1426,7 +1429,7 @@ static int __init ixp_module_init(void)
spin_lock_init(&desc_lock);
spin_lock_init(&emerg_lock);
- err = init_ixp_crypto();
+ err = init_ixp_crypto(&pdev->dev);
if (err) {
platform_device_unregister(pdev);
return err;
@@ -1492,7 +1495,7 @@ static void __exit ixp_module_exit(void)
if (ixp4xx_algos[i].registered)
crypto_unregister_alg(&ixp4xx_algos[i].crypto);
}
- release_ixp_crypto();
+ release_ixp_crypto(&pdev->dev);
platform_device_unregister(pdev);
}
--
1.7.4.4
^ permalink raw reply related
* [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
From: Russell King @ 2013-09-19 23:14 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Greg Kroah-Hartman, Felipe Balbi
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
Use platform_device_register_full() for those drivers which can, to
avoid messing directly with DMA masks. This can only be done when
the driver does not need to access the allocated musb platform device
from within its callbacks, which may be called during the musb
device probing.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/usb/musb/am35x.c | 50 ++++++++++++++----------------------------
drivers/usb/musb/da8xx.c | 49 ++++++++++++++---------------------------
drivers/usb/musb/davinci.c | 48 ++++++++++++++--------------------------
drivers/usb/musb/tusb6010.c | 49 ++++++++++++++---------------------------
4 files changed, 68 insertions(+), 128 deletions(-)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 5c310c6..790b22b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -89,7 +89,6 @@ struct am35x_glue {
struct clk *phy_clk;
struct clk *clk;
};
-#define glue_to_musb(g) platform_get_drvdata(g->musb)
/*
* am35x_musb_enable - enable interrupts
@@ -452,14 +451,18 @@ static const struct musb_platform_ops am35x_ops = {
.set_vbus = am35x_musb_set_vbus,
};
-static u64 am35x_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info am35x_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int am35x_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct am35x_glue *glue;
-
+ struct platform_device_info pinfo;
struct clk *phy_clk;
struct clk *clk;
@@ -471,12 +474,6 @@ static int am35x_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
phy_clk = clk_get(&pdev->dev, "fck");
if (IS_ERR(phy_clk)) {
dev_err(&pdev->dev, "failed to get PHY clock\n");
@@ -503,12 +500,7 @@ static int am35x_probe(struct platform_device *pdev)
goto err6;
}
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &am35x_dmamask;
- musb->dev.coherent_dma_mask = am35x_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
glue->phy_clk = phy_clk;
glue->clk = clk;
@@ -516,22 +508,17 @@ static int am35x_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err7;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err7;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
+ pinfo = am35x_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = pdev->resource;
+ pinfo.num_res = pdev->num_resources;
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
goto err7;
}
@@ -550,9 +537,6 @@ static int am35x_probe(struct platform_device *pdev)
clk_put(phy_clk);
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index d9ddf41..2f2c1cb 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -472,7 +472,11 @@ static const struct musb_platform_ops da8xx_ops = {
.set_vbus = da8xx_musb_set_vbus,
};
-static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info da8xx_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int da8xx_probe(struct platform_device *pdev)
{
@@ -480,7 +484,7 @@ static int da8xx_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct da8xx_glue *glue;
-
+ struct platform_device_info pinfo;
struct clk *clk;
int ret = -ENOMEM;
@@ -491,12 +495,6 @@ static int da8xx_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
clk = clk_get(&pdev->dev, "usb20");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
@@ -510,12 +508,7 @@ static int da8xx_probe(struct platform_device *pdev)
goto err4;
}
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &da8xx_dmamask;
- musb->dev.coherent_dma_mask = da8xx_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &da8xx_ops;
@@ -535,22 +528,17 @@ static int da8xx_probe(struct platform_device *pdev)
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err5;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err5;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
+ pinfo = da8xx_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
goto err5;
}
@@ -563,9 +551,6 @@ static int da8xx_probe(struct platform_device *pdev)
clk_put(clk);
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index ed0834e..45aae0b 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -505,7 +505,11 @@ static const struct musb_platform_ops davinci_ops = {
.set_vbus = davinci_musb_set_vbus,
};
-static u64 davinci_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info davinci_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int davinci_probe(struct platform_device *pdev)
{
@@ -513,6 +517,7 @@ static int davinci_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct davinci_glue *glue;
+ struct platform_device_info pinfo;
struct clk *clk;
int ret = -ENOMEM;
@@ -523,12 +528,6 @@ static int davinci_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
clk = clk_get(&pdev->dev, "usb");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
@@ -542,12 +541,7 @@ static int davinci_probe(struct platform_device *pdev)
goto err4;
}
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &davinci_dmamask;
- musb->dev.coherent_dma_mask = davinci_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &davinci_ops;
@@ -567,22 +561,17 @@ static int davinci_probe(struct platform_device *pdev)
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err5;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err5;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
+ pinfo = davinci_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
goto err5;
}
@@ -595,9 +584,6 @@ static int davinci_probe(struct platform_device *pdev)
clk_put(clk);
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index b3b3ed7..4432314 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1152,7 +1152,11 @@ static const struct musb_platform_ops tusb_ops = {
.set_vbus = tusb_musb_set_vbus,
};
-static u64 tusb_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info tusb_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int tusb_probe(struct platform_device *pdev)
{
@@ -1160,7 +1164,7 @@ static int tusb_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct tusb6010_glue *glue;
-
+ struct platform_device_info pinfo;
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -1169,18 +1173,7 @@ static int tusb_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &tusb_dmamask;
- musb->dev.coherent_dma_mask = tusb_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
pdata->platform_ops = &tusb_ops;
@@ -1204,31 +1197,23 @@ static int tusb_probe(struct platform_device *pdev)
musb_resources[2].end = pdev->resource[2].end;
musb_resources[2].flags = pdev->resource[2].flags;
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err3;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err3;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
+ pinfo = tusb_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
goto err3;
}
return 0;
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
--
1.7.4.4
^ permalink raw reply related
* [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
From: Russell King @ 2013-09-19 23:15 UTC (permalink / raw)
To: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
devicetree-u79uwXL29TY76Z2rM5mHXA,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-crypto-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-media-u79uwXL29TY76Z2rM5mHXA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-nvme-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA, Solarflare linux maintainers,
uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b
Cc: Vinod Koul, Dan Williams
In-Reply-To: <20130919212235.GD12758-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
register_platform_device_full() can setup the DMA mask provided the
appropriate member is set in struct platform_device_info. So lets
make that be the case. This avoids a direct reference to the DMA
masks by this driver.
Signed-off-by: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
---
drivers/dma/edma.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index ff50ff4..7f9fe30 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -702,11 +702,13 @@ static struct platform_device *pdev0, *pdev1;
static const struct platform_device_info edma_dev_info0 = {
.name = "edma-dma-engine",
.id = 0,
+ .dma_mask = DMA_BIT_MASK(32),
};
static const struct platform_device_info edma_dev_info1 = {
.name = "edma-dma-engine",
.id = 1,
+ .dma_mask = DMA_BIT_MASK(32),
};
static int edma_init(void)
@@ -720,8 +722,6 @@ static int edma_init(void)
ret = PTR_ERR(pdev0);
goto out;
}
- pdev0->dev.dma_mask = &pdev0->dev.coherent_dma_mask;
- pdev0->dev.coherent_dma_mask = DMA_BIT_MASK(32);
}
if (EDMA_CTLRS == 2) {
@@ -731,8 +731,6 @@ static int edma_init(void)
platform_device_unregister(pdev0);
ret = PTR_ERR(pdev1);
}
- pdev1->dev.dma_mask = &pdev1->dev.coherent_dma_mask;
- pdev1->dev.coherent_dma_mask = DMA_BIT_MASK(32);
}
out:
--
1.7.4.4
^ permalink raw reply related
* [PATCH 44/51] DMA-API: dcdbas: update DMA mask handing
From: Russell King @ 2013-09-19 23:16 UTC (permalink / raw)
To: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
devicetree-u79uwXL29TY76Z2rM5mHXA,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-crypto-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-media-u79uwXL29TY76Z2rM5mHXA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-nvme-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA, Solarflare linux maintainers,
uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b
Cc: Doug Warzecha
In-Reply-To: <20130919212235.GD12758-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
dcdbas was explicitly initializing DMA masks thusly:
dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
which bypasses the architecture check. Moreover, it is creating the
dcdbas_pdev device itself, and using the platform_device_register_full()
avoids some of this explicit initialization.
Convert the driver to use platform_device_register_full(), and as it
makes use of coherent DMA, also call dma_set_coherent_mask() to ensure
that the architecture gets to check the mask.
Signed-off-by: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
---
drivers/firmware/dcdbas.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index ff080ee..a85fda2 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -549,8 +549,9 @@ static int dcdbas_probe(struct platform_device *dev)
* BIOS SMI calls require buffer addresses be in 32-bit address space.
* This is done by setting the DMA mask below.
*/
- dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
+ error = dma_set_coherent_mask(&dcdbas_pdev->dev, DMA_BIT_MASK(32));
+ if (error)
+ return error;
error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group);
if (error)
@@ -581,6 +582,12 @@ static struct platform_driver dcdbas_driver = {
.remove = dcdbas_remove,
};
+static const struct platform_device_info dcdbas_dev_info __initdata = {
+ .name = DRIVER_NAME,
+ .id = -1,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
/**
* dcdbas_init: initialize driver
*/
@@ -592,20 +599,14 @@ static int __init dcdbas_init(void)
if (error)
return error;
- dcdbas_pdev = platform_device_alloc(DRIVER_NAME, -1);
- if (!dcdbas_pdev) {
- error = -ENOMEM;
+ dcdbas_pdev = platform_device_register_full(&dcdbas_dev_info);
+ if (IS_ERR(dcdbas_pdev)) {
+ error = PTR_ERR(dcdbas_pdev);
goto err_unregister_driver;
}
- error = platform_device_add(dcdbas_pdev);
- if (error)
- goto err_free_device;
-
return 0;
- err_free_device:
- platform_device_put(dcdbas_pdev);
err_unregister_driver:
platform_driver_unregister(&dcdbas_driver);
return error;
--
1.7.4.4
^ permalink raw reply related
* [PATCH 45/51] DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
From: Russell King @ 2013-09-19 23:17 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
This driver doesn't need to directly access DMA masks if it uses the
platform_device_register_full() API rather than
platform_device_register_simple() - the former function can initialize
the DMA mask appropriately.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/firmware/google/gsmi.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index 6eb535f..e5a67b2 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -764,6 +764,13 @@ static __init int gsmi_system_valid(void)
static struct kobject *gsmi_kobj;
static struct efivars efivars;
+static const struct platform_device_info gsmi_dev_info = {
+ .name = "gsmi",
+ .id = -1,
+ /* SMI callbacks require 32bit addresses */
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
static __init int gsmi_init(void)
{
unsigned long flags;
@@ -776,7 +783,7 @@ static __init int gsmi_init(void)
gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
/* register device */
- gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
+ gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
if (IS_ERR(gsmi_dev.pdev)) {
printk(KERN_ERR "gsmi: unable to register platform device\n");
return PTR_ERR(gsmi_dev.pdev);
@@ -785,10 +792,6 @@ static __init int gsmi_init(void)
/* SMI access needs to be serialized */
spin_lock_init(&gsmi_dev.lock);
- /* SMI callbacks require 32bit addresses */
- gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- gsmi_dev.pdev->dev.dma_mask =
- &gsmi_dev.pdev->dev.coherent_dma_mask;
ret = -ENOMEM;
gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
--
1.7.4.4
^ permalink raw reply related
* [PATCH 46/51] ARM: DMA-API: better handing of DMA masks for coherent allocations
From: Russell King @ 2013-09-19 23:39 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
We need to start treating DMA masks as something which is specific to
the bus that the device resides on, otherwise we're going to hit all
sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit
systems, where memory is offset from PFN 0.
In order to start doing this, we convert the DMA mask to a PFN using
the device specific dma_to_pfn() macro. This is the reverse of the
pfn_to_dma() macro which is used to get the DMA address for the device.
This gives us a PFN mask, which we can then check against the PFN
limit of the DMA zone.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++++++++++++++++++++++++----
arch/arm/mm/init.c | 2 +
arch/arm/mm/mm.h | 2 +
3 files changed, 48 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index f5e1a84..13d55e1 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -173,10 +173,30 @@ static u64 get_coherent_dma_mask(struct device *dev)
return 0;
}
- if ((~mask) & (u64)arm_dma_limit) {
- dev_warn(dev, "coherent DMA mask %#llx is smaller "
- "than system GFP_DMA mask %#llx\n",
- mask, (u64)arm_dma_limit);
+ /*
+ * If the mask allows for more memory than we can address,
+ * and we actually have that much memory, then fail the
+ * allocation.
+ */
+ if (sizeof(mask) != sizeof(dma_addr_t) &&
+ mask > (dma_addr_t)~0 &&
+ dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
+ dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
+ mask);
+ dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
+ return 0;
+ }
+
+ /*
+ * Now check that the mask, when translated to a PFN,
+ * fits within the allowable addresses which we can
+ * allocate.
+ */
+ if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
+ dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
+ mask,
+ dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
+ arm_dma_pfn_limit + 1);
return 0;
}
}
@@ -1007,8 +1027,27 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
*/
int dma_supported(struct device *dev, u64 mask)
{
- if (mask < (u64)arm_dma_limit)
+ unsigned long limit;
+
+ /*
+ * If the mask allows for more memory than we can address,
+ * and we actually have that much memory, then we must
+ * indicate that DMA to this device is not supported.
+ */
+ if (sizeof(mask) != sizeof(dma_addr_t) &&
+ mask > (dma_addr_t)~0 &&
+ dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
+ return 0;
+
+ /*
+ * Translate the device's DMA mask to a PFN limit. This
+ * PFN number includes the page which we can DMA to.
+ */
+ limit = dma_to_pfn(dev, mask);
+
+ if (limit < arm_dma_pfn_limit)
return 0;
+
return 1;
}
EXPORT_SYMBOL(dma_supported);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index febaee7..8aab24f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -218,6 +218,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);
* so a successful GFP_DMA allocation will always satisfy this.
*/
phys_addr_t arm_dma_limit;
+unsigned long arm_dma_pfn_limit;
static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
unsigned long dma_size)
@@ -240,6 +241,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
} else
arm_dma_limit = 0xffffffff;
+ arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;
#endif
}
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index d5a4e9a..d5a982d 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -81,8 +81,10 @@ extern __init void add_static_vm_early(struct static_vm *svm);
#ifdef CONFIG_ZONE_DMA
extern phys_addr_t arm_dma_limit;
+extern unsigned long arm_dma_pfn_limit;
#else
#define arm_dma_limit ((phys_addr_t)~0)
+#define arm_dma_pfn_limit (~0ul >> PAGE_SHIFT)
#endif
extern phys_addr_t arm_lowmem_limit;
--
1.7.4.4
^ permalink raw reply related
* [PATCH 47/51] ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
From: Russell King @ 2013-09-19 23:40 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Jens Axboe
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
The blk_queue_bounce_limit() API parameter 'dma_mask' is actually the
maximum address the device can handle rather than a dma_mask. Rename
it accordingly to avoid it being interpreted as dma_mask.
No functional change.
The idea is to fix the bad assumptions about dma_mask wherever it could
be miss-interpreted.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
block/blk-settings.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index c50ecf0..026c151 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -195,17 +195,17 @@ EXPORT_SYMBOL(blk_queue_make_request);
/**
* blk_queue_bounce_limit - set bounce buffer limit for queue
* @q: the request queue for the device
- * @dma_mask: the maximum address the device can handle
+ * @max_addr: the maximum address the device can handle
*
* Description:
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @dma_mask.
+ * buffers for doing I/O to pages residing above @max_addr.
**/
-void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
+void blk_queue_bounce_limit(struct request_queue *q, u64 max_addr)
{
- unsigned long b_pfn = dma_mask >> PAGE_SHIFT;
+ unsigned long b_pfn = max_addr >> PAGE_SHIFT;
int dma = 0;
q->bounce_gfp = GFP_NOIO;
--
1.7.4.4
^ permalink raw reply related
* [PATCH 48/51] ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
From: Russell King @ 2013-09-19 23:41 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Vinod Koul, Jens Axboe, Dan Williams
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Most of the kernel assumes that PFN0 is the start of the physical
memory (RAM). This assumptions is not true on most of the ARM SOCs
and hence and if one try to update the ARM port to follow the assumptions,
we end of breaking the dma bounce limit for few block layer drivers.
One such example is trying to unify the meaning of max*_pfn on ARM
as the bootmem layer expects, breaks few block layer driver dma
bounce limit.
To fix this problem, we introduce dma_max_pfn(dev) generic helper with
a possibility of override from the architecture code. The helper converts
a DMA bitmask of bits to a block PFN number. In all the generic cases,
it is just "dev->dma_mask >> PAGE_SHIFT" and hence default behavior
is maintained as is.
Subsequent patches will make use of the helper. No functional change.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
include/linux/dma-mapping.h | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 27d1421..fd4aee2 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -153,6 +153,13 @@ static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask)
return -EIO;
}
+#ifndef dma_max_pfn
+static inline unsigned long dma_max_pfn(struct device *dev)
+{
+ return *dev->dma_mask >> PAGE_SHIFT;
+}
+#endif
+
static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
--
1.7.4.4
^ permalink raw reply related
* [PATCH 49/51] ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
From: Russell King @ 2013-09-19 23:42 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: James E.J. Bottomley
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
DMA bounce limit is the maximum direct DMA'able memory beyond which
bounce buffers has to be used to perform dma operations. SCSI driver
relies on dma_mask but its calculation is based on max_*pfn which
don't have uniform meaning across architectures. So make use of
dma_max_pfn() which is expected to return the DMAable maximum pfn
value across architectures.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/scsi/scsi_lib.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d1549b7..7bd7f0d 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1684,7 +1684,7 @@ u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
host_dev = scsi_get_device(shost);
if (host_dev && host_dev->dma_mask)
- bounce_limit = *host_dev->dma_mask;
+ bounce_limit = dma_max_pfn(host_dev) << PAGE_SHIFT;
return bounce_limit;
}
--
1.7.4.4
^ permalink raw reply related
* [PATCH 50/51] ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
From: Russell King @ 2013-09-19 23:43 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Chris Ball
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
DMA bounce limit is the maximum direct DMA'able memory beyond which
bounce buffers has to be used to perform dma operations. MMC queue layr
relies on dma_mask but its calculation is based on max_*pfn which
don't have uniform meaning across architectures. So make use of
dma_max_pfn() which is expected to return the DMAable maximum pfn
value across architectures.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/mmc/card/queue.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index fa9632e..357bbc5 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -15,6 +15,7 @@
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -196,7 +197,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
- limit = *mmc_dev(host)->dma_mask;
+ limit = dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
mq->card = card;
mq->queue = blk_init_queue(mmc_request_fn, lock);
--
1.7.4.4
^ permalink raw reply related
* [PATCH 51/51] ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
From: Russell King @ 2013-09-19 23:44 UTC (permalink / raw)
To: alsa-devel, b43-dev, devel, devicetree, dri-devel, e1000-devel,
linux-arm-kernel, linux-crypto, linux-doc, linux-fbdev, linux-ide,
linux-media, linux-mmc, linux-nvme, linux-omap, linuxppc-dev,
linux-samsung-soc, linux-scsi, linux-tegra, linux-usb,
linux-wireless, netdev, Solarflare linux maintainers,
uclinux-dist-devel
Cc: Nicolas Pitre, Catalin Marinas, Will Deacon
In-Reply-To: <20130919212235.GD12758@n2100.arm.linux.org.uk>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Most of the kernel code assumes that max*pfn is maximum pfns because
the physical start of memory is expected to be PFN0. Since this
assumption is not true on ARM architectures, the meaning of max*pfn
is number of memory pages. This is done to keep drivers happy which
are making use of of these variable to calculate the dma bounce limit
using dma_mask.
Now since we have a architecture override possibility for DMAable
maximum pfns, lets make meaning of max*pfns as maximum pnfs on ARM
as well.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/include/asm/dma-mapping.h | 8 ++++++++
arch/arm/mm/init.c | 10 ++++------
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 5b579b9..863cd84 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -64,6 +64,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
{
return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
}
+
#else
static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
{
@@ -86,6 +87,13 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
}
#endif
+/* The ARM override for dma_max_pfn() */
+static inline unsigned long dma_max_pfn(struct device *dev)
+{
+ return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+}
+#define dma_max_pfn(dev) dma_max_pfn(dev)
+
/*
* DMA errors are defined by all-bits-set in the DMA address.
*/
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 8aab24f..d50533c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -426,12 +426,10 @@ void __init bootmem_init(void)
* This doesn't seem to be used by the Linux memory manager any
* more, but is used by ll_rw_block. If we can get rid of it, we
* also get rid of some of the stuff above as well.
- *
- * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
- * the system, not the maximum PFN.
*/
- max_low_pfn = max_low - PHYS_PFN_OFFSET;
- max_pfn = max_high - PHYS_PFN_OFFSET;
+ min_low_pfn = min;
+ max_low_pfn = max_low;
+ max_pfn = max_high;
}
/*
@@ -537,7 +535,7 @@ static inline void free_area_high(unsigned long pfn, unsigned long end)
static void __init free_highpages(void)
{
#ifdef CONFIG_HIGHMEM
- unsigned long max_low = max_low_pfn + PHYS_PFN_OFFSET;
+ unsigned long max_low = max_low_pfn;
struct memblock_region *mem, *res;
/* set highmem page free */
--
1.7.4.4
^ permalink raw reply related
* [PATCH] declance: Remove `incompatible pointer type' warnings
From: Maciej W. Rozycki @ 2013-09-19 23:49 UTC (permalink / raw)
To: netdev
Revert damage caused by 43d620c82985b19008d87a437b4cf83f356264f7:
.../declance.c: In function 'cp_to_buf':
.../declance.c:347: warning: assignment from incompatible pointer type
.../declance.c:348: warning: assignment from incompatible pointer type
.../declance.c: In function 'cp_from_buf':
.../declance.c:406: warning: assignment from incompatible pointer type
.../declance.c:407: warning: assignment from incompatible pointer type
Also add a `const' qualifier where applicable and adjust formatting.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
---
linux-declance-cast-fix.patch
Index: linux-mips-3.12.0-rc1-20130917-4maxp/drivers/net/ethernet/amd/declance.c
===================================================================
--- linux-mips-3.12.0-rc1-20130917-4maxp.orig/drivers/net/ethernet/amd/declance.c
+++ linux-mips-3.12.0-rc1-20130917-4maxp/drivers/net/ethernet/amd/declance.c
@@ -344,8 +344,8 @@ static void cp_to_buf(const int type, vo
}
clen = len & 1;
- rtp = tp;
- rfp = fp;
+ rtp = (unsigned char *)tp;
+ rfp = (const unsigned char *)fp;
while (clen--) {
*rtp++ = *rfp++;
}
@@ -372,8 +372,8 @@ static void cp_to_buf(const int type, vo
* do the rest, if any.
*/
clen = len & 15;
- rtp = (unsigned char *) tp;
- rfp = (unsigned char *) fp;
+ rtp = (unsigned char *)tp;
+ rfp = (const unsigned char *)fp;
while (clen--) {
*rtp++ = *rfp++;
}
@@ -403,8 +403,8 @@ static void cp_from_buf(const int type,
clen = len & 1;
- rtp = tp;
- rfp = fp;
+ rtp = (unsigned char *)tp;
+ rfp = (const unsigned char *)fp;
while (clen--) {
*rtp++ = *rfp++;
@@ -433,8 +433,8 @@ static void cp_from_buf(const int type,
* do the rest, if any.
*/
clen = len & 15;
- rtp = (unsigned char *) tp;
- rfp = (unsigned char *) fp;
+ rtp = (unsigned char *)tp;
+ rfp = (const unsigned char *)fp;
while (clen--) {
*rtp++ = *rfp++;
}
^ permalink raw reply
* Re: [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup
From: Simon Horman @ 2013-09-19 21:20 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: linux-sh, magnus.damm, linux, linux-arm-kernel,
laurent.pinchart+renesas, netdev
In-Reply-To: <201309140429.23474.sergei.shtylyov@cogentembedded.com>
On Sat, Sep 14, 2013 at 04:29:22AM +0400, Sergei Shtylyov wrote:
> Currently on the Lager board NFS timeouts/delays are seen when booting. That
> turned out to happen because the SoC's ETH_LINK signal turns on and off after
> each packet. It is connected to Micrel KSZ8041 PHY's LED0 signal. Ether LEDs
> on the Lager board are named LINK and ACTIVE which corresponds to non-default
> 01 setting of the PHY control register 1 bits 14-15. The 'sh_eth' driver resets
> the PHY when opening the network device, so we have to set the mentioned bits
> back to 01 from the default 00 value which causes bouncing of ETH_LINK. That
> can be achieved using the PHY platform fixup mechanism if we also modify the
> driver to use it..
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> This patch is against the recent Linus' tree. Its effect on NFS issue depends
> on the 'sh_eth' driver patch I've posted earlier.
> Simon, please update your 'master' and/or 'fixes' branches since currently it's
> impossible to apply fixes to your tree.
Now that rc-1 is out I plan to rebase my tree.
But as I am travelling this week it will have to wait until next week.
>
> arch/arm/mach-shmobile/board-lager.c | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> Index: linux/arch/arm/mach-shmobile/board-lager.c
> ===================================================================
> --- linux.orig/arch/arm/mach-shmobile/board-lager.c
> +++ linux/arch/arm/mach-shmobile/board-lager.c
> @@ -29,6 +29,7 @@
> #include <linux/pinctrl/machine.h>
> #include <linux/platform_data/gpio-rcar.h>
> #include <linux/platform_device.h>
> +#include <linux/phy.h>
> #include <linux/regulator/fixed.h>
> #include <linux/regulator/machine.h>
> #include <linux/sh_eth.h>
> @@ -155,6 +156,30 @@ static void __init lager_add_standard_de
> ðer_pdata, sizeof(ether_pdata));
> }
>
> +/*
> + * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
> + * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
> + * 14-15. We have to set them back to 01 from the default 00 value each time
> + * the PHY is reset. It's also important because the PHY's LED0 signal is
> + * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
> + * bounce on and off after each packet, which we apparently want to avoid.
> + */
> +static int lager_ksz8041_fixup(struct phy_device *phydev)
> +{
> + u16 phyctrl1 = phy_read(phydev, 0x1e);
> +
> + phyctrl1 &= ~0xc000;
> + phyctrl1 |= 0x4000;
> + return phy_write(phydev, 0x1e, phyctrl1);
> +}
> +
> +static void __init lager_init(void)
> +{
> + lager_add_standard_devices();
> +
> + phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
> +}
> +
> static const char *lager_boards_compat_dt[] __initdata = {
> "renesas,lager",
> NULL,
> @@ -163,6 +188,6 @@ static const char *lager_boards_compat_d
> DT_MACHINE_START(LAGER_DT, "lager")
> .init_early = r8a7790_init_delay,
> .init_time = r8a7790_timer_init,
> - .init_machine = lager_add_standard_devices,
> + .init_machine = lager_init,
> .dt_compat = lager_boards_compat_dt,
> MACHINE_END
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* Re: [PATCH] iproute2: bridge: document mdb
From: Cong Wang @ 2013-09-20 1:09 UTC (permalink / raw)
To: netdev
In-Reply-To: <1379580086-31784-2-git-send-email-ppisar@redhat.com>
On Thu, 19 Sep 2013 at 08:41 GMT, Petr Písař <ppisar@redhat.com> wrote:
> This augments bridge(8) manual page with `bridge mdb' and `bridge
> monitor mdb' commands which have been added recently.
>
> Signed-off-by: Petr Písař <ppisar@redhat.com>
Acked-by: Cong Wang <amwang@redhat.com>
^ permalink raw reply
* Re: [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks
From: Ben Hutchings @ 2013-09-20 1:21 UTC (permalink / raw)
To: Russell King
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
devicetree-u79uwXL29TY76Z2rM5mHXA,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-crypto-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-media-u79uwXL29TY76Z2rM5mHXA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-nvme-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA, Solarflare linux maintainers,
uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b, Rob Landley,
Vinod Koul, Dan
In-Reply-To: <E1VMlja-0007fA-HU-eh5Bv4kxaXIANfyc6IWni62ZND6+EDdj@public.gmane.org>
On Thu, 2013-09-19 at 22:25 +0100, Russell King wrote:
> Provide a helper to set both the DMA and coherent DMA masks to the
> same value - this avoids duplicated code in a number of drivers,
> sometimes with buggy error handling, and also allows us identify
> which drivers do things differently.
>
> Signed-off-by: Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
> ---
> Documentation/DMA-API-HOWTO.txt | 37 ++++++++++++++++++++++---------------
> Documentation/DMA-API.txt | 8 ++++++++
> include/linux/dma-mapping.h | 14 ++++++++++++++
> 3 files changed, 44 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
> index 14129f1..5e98303 100644
> --- a/Documentation/DMA-API-HOWTO.txt
> +++ b/Documentation/DMA-API-HOWTO.txt
[...]
> -dma_set_coherent_mask() will always be able to set the same or a
> -smaller mask as dma_set_mask(). However for the rare case that a
> +The coherent coherent mask will always be able to set the same or a
> +smaller mask as the streaming mask. However for the rare case that a
[...]
The new wording doesn't make sense; a mask doesn't set itself. I would
suggest:
"The coherent mask can always be set to the same or a smaller mask than
the streaming mask."
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [ovs-dev] [PATCH v2.39 7/7] datapath: Add basic MPLS support to kernel
From: Pravin Shelar @ 2013-09-20 1:31 UTC (permalink / raw)
To: Simon Horman; +Cc: dev@openvswitch.org, Ravi K, netdev, Isaku Yamahata
In-Reply-To: <20130919204214.GA2734@verge.net.au>
On Thu, Sep 19, 2013 at 1:45 PM, Simon Horman <horms@verge.net.au> wrote:
> On Wed, Sep 18, 2013 at 05:07:59PM -0500, Simon Horman wrote:
>> On Tue, Sep 17, 2013 at 11:38:18AM -0700, Pravin Shelar wrote:
>> > On Mon, Sep 9, 2013 at 12:20 AM, Simon Horman <horms@verge.net.au> wrote:
>> > > Allow datapath to recognize and extract MPLS labels into flow keys
>> > > and execute actions which push, pop, and set labels on packets.
>> > >
>> > > Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer.
>> > >
>> > > Cc: Ravi K <rkerur@gmail.com>
>> > > Cc: Leo Alterman <lalterman@nicira.com>
>> > > Cc: Isaku Yamahata <yamahata@valinux.co.jp>
>> > > Cc: Joe Stringer <joe@wand.net.nz>
>> > > Signed-off-by: Simon Horman <horms@verge.net.au>
>> > >
>> > > ---
>> > ....
>> > > diff --git a/datapath/datapath.h b/datapath/datapath.h
>> > > index 5d50dd4..babae3b 100644
>> > > --- a/datapath/datapath.h
>> > > +++ b/datapath/datapath.h
>> > > @@ -36,6 +36,10 @@
>> > >
>> > > #define SAMPLE_ACTION_DEPTH 3
>> > >
>> > > +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
>> > > +#define HAVE_INNER_PROTOCOL
>> > > +#endif
>> > > +
>> > > /**
>> > > * struct dp_stats_percpu - per-cpu packet processing statistics for a given
>> > > * datapath.
>> > > @@ -93,11 +97,16 @@ struct datapath {
>> > > * @pkt_key: The flow information extracted from the packet. Must be nonnull.
>> > > * @tun_key: Key for the tunnel that encapsulated this packet. NULL if the
>> > > * packet is not being tunneled.
>> > > + * @inner_protocol: Provides a substitute for the skb->inner_protocol field on
>> > > + * kernels before 3.11.
>> > > */
>> > > struct ovs_skb_cb {
>> > > struct sw_flow *flow;
>> > > struct sw_flow_key *pkt_key;
>> > > struct ovs_key_ipv4_tunnel *tun_key;
>> > > +#ifndef HAVE_INNER_PROTOCOL
>> > > + __be16 inner_protocol;
>> > > +#endif
>> > > };
>> > > #define OVS_CB(skb) ((struct ovs_skb_cb *)(skb)->cb)
>> > >
>> > Can you move this to compat struct ovs_gso_cb {}
>>
>> I think that you are correct and inner_protocol needs
>> to be in struct ovs_gso_cb so that it can
>> be accessed via skb_network_protocol() from
>> rpl___skb_gso_segment().
>>
>> However I think it may also need to be present in struct ovs_cb
>> so that it can be set correctly.
>>
>> Currently it is set unconditionally
>> in ovs_execute_actions() and Jesse has suggested setting
>> it conditionally in pop_mpls() (which is called by do_execute_actions()).
>> But regardless it seems to me that the field would need to be available
>> in struct ovs_cb.
>
> Having reviewed the code once more I now notice that struct ovs_gso_cb
> contains struct ovs_skb_cb dp_cb. Whereas my previous assumption was
> that they were mutually exclusive.
>
> With this in mind I think it should be safe to use ovs_gso_cb from
> ovs_execute_actions() or do_execute_actions() but I would value
> your opinion on that.
>
> Conversely, if inner_protocol was left in struct ovs_skb_cb there should
> be no problem with accessing it from GSO code as the code currently does.
> So I am not sure that I see the value of moving it but I am happy to do
> so if you think it is safe and it is your preferred option.
right, access is not issue.
Value is the code in datapath.c, with compatibility, remains closer to
upstream ovs module. We have always tried to keep it that way.
^ permalink raw reply
* Re: add ip to interface as primary ip address, not secondary ip when there is alreadly primary ip?
From: Cong Wang @ 2013-09-20 2:28 UTC (permalink / raw)
To: netdev
In-Reply-To: <CAK3+h2yWjswp6qrToMPbrQyuyCKkh5Yuuo6TeX8VhGQCGpCecw@mail.gmail.com>
On Thu, 19 Sep 2013 at 16:54 GMT, Vincent Li <vincent.mc.li@gmail.com> wrote:
> thanks for the pointer
>
> 'ip addr' indeed has flag IFA_F_SECONDARY for this, but it is not
> available for 'ip addr add', so I made a simple patch for iproute2
> ip/ipaddress.c as below:
% git grep secondary ip/ipaddress.c
ip/ipaddress.c: fprintf(stderr, "FLAG := [ permanent | dynamic |
secondary | primary |\n");
ip/ipaddress.c: fprintf(fp, "secondary ");
ip/ipaddress.c:static int print_addrinfo_secondary(const struct
sockaddr_nl *who,
ip/ipaddress.c: .filter =
print_addrinfo_secondary,
ip/ipaddress.c: } else if (strcmp(*argv, "secondary") == 0 ||
^ permalink raw reply
* Re: add ip to interface as primary ip address, not secondary ip when there is alreadly primary ip?
From: Vincent Li @ 2013-09-20 3:53 UTC (permalink / raw)
To: Cong Wang; +Cc: netdev@vger.kernel.org
In-Reply-To: <l1gbs4$da2$1@ger.gmane.org>
yes, I found them too, they are for 'ip addr show' or 'ip addr list'
though, not for 'ip addr add' unless I am missing something obvious.
care to clarify further ?
Vincent
On Thu, Sep 19, 2013 at 7:28 PM, Cong Wang <xiyou.wangcong@gmail.com> wrote:
> On Thu, 19 Sep 2013 at 16:54 GMT, Vincent Li <vincent.mc.li@gmail.com> wrote:
>> thanks for the pointer
>>
>> 'ip addr' indeed has flag IFA_F_SECONDARY for this, but it is not
>> available for 'ip addr add', so I made a simple patch for iproute2
>> ip/ipaddress.c as below:
>
> % git grep secondary ip/ipaddress.c
> ip/ipaddress.c: fprintf(stderr, "FLAG := [ permanent | dynamic |
> secondary | primary |\n");
> ip/ipaddress.c: fprintf(fp, "secondary ");
> ip/ipaddress.c:static int print_addrinfo_secondary(const struct
> sockaddr_nl *who,
> ip/ipaddress.c: .filter =
> print_addrinfo_secondary,
> ip/ipaddress.c: } else if (strcmp(*argv, "secondary") == 0 ||
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 1/2] remove all uses of printf's %n
From: Tetsuo Handa @ 2013-09-20 4:09 UTC (permalink / raw)
To: jslaby, viro, xemul, remi.denis-courmont
Cc: keescook, linux-kernel, netdev, linux-sctp, linux, akpm,
dan.carpenter, geert, JBeulich, joe, kosaki.motohiro
In-Reply-To: <CAGXu5jK_D1BJOQr=1A-UFrpM5Ad+Qu894HT_XjkZh4EmsbCkTQ@mail.gmail.com>
Hello.
We are discussing about removal of %n support from vsnprintf() at
https://lkml.org/lkml/2013/9/16/52 , and you are using %n in seq_printf().
I posted https://lkml.org/lkml/diff/2013/9/19/53/1 which introduces
seq_setwidth() / seq_pad() which can avoid use of %n in seq_printf().
Assuming that this patch is merged, would you confirm that I didn't break
your code with below patch?
Regards.
----------------------------------------
>From f8b60ebe3971901b93dedb8eee0f85b60d0fdc5f Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Fri, 20 Sep 2013 12:01:07 +0900
Subject: [PATCH] Remove "%n" usage from seq_file users.
All seq_printf() users are using "%n" for calculating padding size, convert
them to use seq_setwidth() / seq_pad() pair.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
---
fs/proc/consoles.c | 10 ++++------
fs/proc/nommu.c | 12 +++++-------
fs/proc/task_mmu.c | 20 ++++++--------------
fs/proc/task_nommu.c | 19 ++++++-------------
net/ipv4/fib_trie.c | 13 +++++++------
net/ipv4/ping.c | 15 +++++++--------
net/ipv4/tcp_ipv4.c | 33 +++++++++++++++------------------
net/ipv4/udp.c | 15 +++++++--------
net/phonet/socket.c | 24 +++++++++++-------------
net/sctp/objcnt.c | 9 +++++----
10 files changed, 73 insertions(+), 97 deletions(-)
diff --git a/fs/proc/consoles.c b/fs/proc/consoles.c
index b701eaa..51942d5 100644
--- a/fs/proc/consoles.c
+++ b/fs/proc/consoles.c
@@ -29,7 +29,6 @@ static int show_console_dev(struct seq_file *m, void *v)
char flags[ARRAY_SIZE(con_flags) + 1];
struct console *con = v;
unsigned int a;
- int len;
dev_t dev = 0;
if (con->device) {
@@ -47,11 +46,10 @@ static int show_console_dev(struct seq_file *m, void *v)
con_flags[a].name : ' ';
flags[a] = 0;
- seq_printf(m, "%s%d%n", con->name, con->index, &len);
- len = 21 - len;
- if (len < 1)
- len = 1;
- seq_printf(m, "%*c%c%c%c (%s)", len, ' ', con->read ? 'R' : '-',
+ seq_setwidth(m, 21 - 1);
+ seq_printf(m, "%s%d", con->name, con->index);
+ seq_pad(m, ' ');
+ seq_printf(m, "%c%c%c (%s)", con->read ? 'R' : '-',
con->write ? 'W' : '-', con->unblank ? 'U' : '-',
flags);
if (dev)
diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index ccfd99b..5f9bc8a 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -39,7 +39,7 @@ static int nommu_region_show(struct seq_file *m, struct vm_region *region)
unsigned long ino = 0;
struct file *file;
dev_t dev = 0;
- int flags, len;
+ int flags;
flags = region->vm_flags;
file = region->vm_file;
@@ -50,8 +50,9 @@ static int nommu_region_show(struct seq_file *m, struct vm_region *region)
ino = inode->i_ino;
}
+ seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
seq_printf(m,
- "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
+ "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu ",
region->vm_start,
region->vm_end,
flags & VM_READ ? 'r' : '-',
@@ -59,13 +60,10 @@ static int nommu_region_show(struct seq_file *m, struct vm_region *region)
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
((loff_t)region->vm_pgoff) << PAGE_SHIFT,
- MAJOR(dev), MINOR(dev), ino, &len);
+ MAJOR(dev), MINOR(dev), ino);
if (file) {
- len = 25 + sizeof(void *) * 6 - len;
- if (len < 1)
- len = 1;
- seq_printf(m, "%*c", len, ' ');
+ seq_pad(m, ' ');
seq_path(m, &file->f_path, "");
}
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 7366e9d..cc24165 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -83,14 +83,6 @@ unsigned long task_statm(struct mm_struct *mm,
return mm->total_vm;
}
-static void pad_len_spaces(struct seq_file *m, int len)
-{
- len = 25 + sizeof(void*) * 6 - len;
- if (len < 1)
- len = 1;
- seq_printf(m, "%*c", len, ' ');
-}
-
#ifdef CONFIG_NUMA
/*
* These functions are for numa_maps but called in generic **maps seq_file
@@ -268,7 +260,6 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid)
unsigned long long pgoff = 0;
unsigned long start, end;
dev_t dev = 0;
- int len;
const char *name = NULL;
if (file) {
@@ -286,7 +277,8 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid)
if (stack_guard_page_end(vma, end))
end -= PAGE_SIZE;
- seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
+ seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
+ seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu ",
start,
end,
flags & VM_READ ? 'r' : '-',
@@ -294,14 +286,14 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid)
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? 's' : 'p',
pgoff,
- MAJOR(dev), MINOR(dev), ino, &len);
+ MAJOR(dev), MINOR(dev), ino);
/*
* Print the dentry name for named mappings, and a
* special [heap] marker for the heap:
*/
if (file) {
- pad_len_spaces(m, len);
+ seq_pad(m, ' ');
seq_path(m, &file->f_path, "\n");
goto done;
}
@@ -333,7 +325,7 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid)
name = "[stack]";
} else {
/* Thread stack in /proc/PID/maps */
- pad_len_spaces(m, len);
+ seq_pad(m, ' ');
seq_printf(m, "[stack:%d]", tid);
}
}
@@ -341,7 +333,7 @@ show_map_vma(struct seq_file *m, struct vm_area_struct *vma, int is_pid)
done:
if (name) {
- pad_len_spaces(m, len);
+ seq_pad(m, ' ');
seq_puts(m, name);
}
seq_putc(m, '\n');
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 56123a6..678455d 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -123,14 +123,6 @@ unsigned long task_statm(struct mm_struct *mm,
return size;
}
-static void pad_len_spaces(struct seq_file *m, int len)
-{
- len = 25 + sizeof(void*) * 6 - len;
- if (len < 1)
- len = 1;
- seq_printf(m, "%*c", len, ' ');
-}
-
/*
* display a single VMA to a sequenced file
*/
@@ -142,7 +134,7 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma,
unsigned long ino = 0;
struct file *file;
dev_t dev = 0;
- int flags, len;
+ int flags;
unsigned long long pgoff = 0;
flags = vma->vm_flags;
@@ -155,8 +147,9 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma,
pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
}
+ seq_setwidth(m, 25 + sizeof(void *) * 6 - 1);
seq_printf(m,
- "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
+ "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu ",
vma->vm_start,
vma->vm_end,
flags & VM_READ ? 'r' : '-',
@@ -164,16 +157,16 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma,
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
pgoff,
- MAJOR(dev), MINOR(dev), ino, &len);
+ MAJOR(dev), MINOR(dev), ino);
if (file) {
- pad_len_spaces(m, len);
+ seq_pad(m, ' ');
seq_path(m, &file->f_path, "");
} else if (mm) {
pid_t tid = vm_is_stack(priv->task, vma, is_pid);
if (tid != 0) {
- pad_len_spaces(m, len);
+ seq_pad(m, ' ');
/*
* Thread stack in /proc/PID/task/TID/maps or
* the main process stack.
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 3df6d3e..b1af50e 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -2530,16 +2530,17 @@ static int fib_route_seq_show(struct seq_file *seq, void *v)
list_for_each_entry_rcu(fa, &li->falh, fa_list) {
const struct fib_info *fi = fa->fa_info;
unsigned int flags = fib_flag_trans(fa->fa_type, mask, fi);
- int len;
if (fa->fa_type == RTN_BROADCAST
|| fa->fa_type == RTN_MULTICAST)
continue;
+ seq_setwidth(seq, 127);
+
if (fi)
seq_printf(seq,
"%s\t%08X\t%08X\t%04X\t%d\t%u\t"
- "%d\t%08X\t%d\t%u\t%u%n",
+ "%d\t%08X\t%d\t%u\t%u",
fi->fib_dev ? fi->fib_dev->name : "*",
prefix,
fi->fib_nh->nh_gw, flags, 0, 0,
@@ -2548,15 +2549,15 @@ static int fib_route_seq_show(struct seq_file *seq, void *v)
(fi->fib_advmss ?
fi->fib_advmss + 40 : 0),
fi->fib_window,
- fi->fib_rtt >> 3, &len);
+ fi->fib_rtt >> 3);
else
seq_printf(seq,
"*\t%08X\t%08X\t%04X\t%d\t%u\t"
- "%d\t%08X\t%d\t%u\t%u%n",
+ "%d\t%08X\t%d\t%u\t%u",
prefix, 0, flags, 0, 0, 0,
- mask, 0, 0, 0, &len);
+ mask, 0, 0, 0);
- seq_printf(seq, "%*s\n", 127 - len, "");
+ seq_pad(seq, '\n');
}
}
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index d7d9882..94cc685 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -1073,7 +1073,7 @@ void ping_seq_stop(struct seq_file *seq, void *v)
EXPORT_SYMBOL_GPL(ping_seq_stop);
static void ping_v4_format_sock(struct sock *sp, struct seq_file *f,
- int bucket, int *len)
+ int bucket)
{
struct inet_sock *inet = inet_sk(sp);
__be32 dest = inet->inet_daddr;
@@ -1082,7 +1082,7 @@ static void ping_v4_format_sock(struct sock *sp, struct seq_file *f,
__u16 srcp = ntohs(inet->inet_sport);
seq_printf(f, "%5d: %08X:%04X %08X:%04X"
- " %02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %d%n",
+ " %02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %d",
bucket, src, srcp, dest, destp, sp->sk_state,
sk_wmem_alloc_get(sp),
sk_rmem_alloc_get(sp),
@@ -1090,23 +1090,22 @@ static void ping_v4_format_sock(struct sock *sp, struct seq_file *f,
from_kuid_munged(seq_user_ns(f), sock_i_uid(sp)),
0, sock_i_ino(sp),
atomic_read(&sp->sk_refcnt), sp,
- atomic_read(&sp->sk_drops), len);
+ atomic_read(&sp->sk_drops));
}
static int ping_v4_seq_show(struct seq_file *seq, void *v)
{
+ seq_setwidth(seq, 127);
if (v == SEQ_START_TOKEN)
- seq_printf(seq, "%-127s\n",
- " sl local_address rem_address st tx_queue "
+ seq_puts(seq, " sl local_address rem_address st tx_queue "
"rx_queue tr tm->when retrnsmt uid timeout "
"inode ref pointer drops");
else {
struct ping_iter_state *state = seq->private;
- int len;
- ping_v4_format_sock(v, seq, state->bucket, &len);
- seq_printf(seq, "%*s\n", 127 - len, "");
+ ping_v4_format_sock(v, seq, state->bucket);
}
+ seq_pad(seq, '\n');
return 0;
}
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index b14266b..2948b76 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2598,13 +2598,13 @@ void tcp_proc_unregister(struct net *net, struct tcp_seq_afinfo *afinfo)
EXPORT_SYMBOL(tcp_proc_unregister);
static void get_openreq4(const struct sock *sk, const struct request_sock *req,
- struct seq_file *f, int i, kuid_t uid, int *len)
+ struct seq_file *f, int i, kuid_t uid)
{
const struct inet_request_sock *ireq = inet_rsk(req);
long delta = req->expires - jiffies;
seq_printf(f, "%4d: %08X:%04X %08X:%04X"
- " %02X %08X:%08X %02X:%08lX %08X %5u %8d %u %d %pK%n",
+ " %02X %08X:%08X %02X:%08lX %08X %5u %8d %u %d %pK",
i,
ireq->loc_addr,
ntohs(inet_sk(sk)->inet_sport),
@@ -2619,11 +2619,10 @@ static void get_openreq4(const struct sock *sk, const struct request_sock *req,
0, /* non standard timer */
0, /* open_requests have no inode */
atomic_read(&sk->sk_refcnt),
- req,
- len);
+ req);
}
-static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len)
+static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i)
{
int timer_active;
unsigned long timer_expires;
@@ -2662,7 +2661,7 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len)
rx_queue = max_t(int, tp->rcv_nxt - tp->copied_seq, 0);
seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX "
- "%08X %5u %8d %lu %d %pK %lu %lu %u %u %d%n",
+ "%08X %5u %8d %lu %d %pK %lu %lu %u %u %d",
i, src, srcp, dest, destp, sk->sk_state,
tp->write_seq - tp->snd_una,
rx_queue,
@@ -2679,12 +2678,11 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len)
tp->snd_cwnd,
sk->sk_state == TCP_LISTEN ?
(fastopenq ? fastopenq->max_qlen : 0) :
- (tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh),
- len);
+ (tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh));
}
static void get_timewait4_sock(const struct inet_timewait_sock *tw,
- struct seq_file *f, int i, int *len)
+ struct seq_file *f, int i)
{
__be32 dest, src;
__u16 destp, srcp;
@@ -2696,10 +2694,10 @@ static void get_timewait4_sock(const struct inet_timewait_sock *tw,
srcp = ntohs(tw->tw_sport);
seq_printf(f, "%4d: %08X:%04X %08X:%04X"
- " %02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK%n",
+ " %02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK",
i, src, srcp, dest, destp, tw->tw_substate, 0, 0,
3, jiffies_delta_to_clock_t(delta), 0, 0, 0, 0,
- atomic_read(&tw->tw_refcnt), tw, len);
+ atomic_read(&tw->tw_refcnt), tw);
}
#define TMPSZ 150
@@ -2707,11 +2705,10 @@ static void get_timewait4_sock(const struct inet_timewait_sock *tw,
static int tcp4_seq_show(struct seq_file *seq, void *v)
{
struct tcp_iter_state *st;
- int len;
+ seq_setwidth(seq, TMPSZ - 1);
if (v == SEQ_START_TOKEN) {
- seq_printf(seq, "%-*s\n", TMPSZ - 1,
- " sl local_address rem_address st tx_queue "
+ seq_puts(seq, " sl local_address rem_address st tx_queue "
"rx_queue tr tm->when retrnsmt uid timeout "
"inode");
goto out;
@@ -2721,17 +2718,17 @@ static int tcp4_seq_show(struct seq_file *seq, void *v)
switch (st->state) {
case TCP_SEQ_STATE_LISTENING:
case TCP_SEQ_STATE_ESTABLISHED:
- get_tcp4_sock(v, seq, st->num, &len);
+ get_tcp4_sock(v, seq, st->num);
break;
case TCP_SEQ_STATE_OPENREQ:
- get_openreq4(st->syn_wait_sk, v, seq, st->num, st->uid, &len);
+ get_openreq4(st->syn_wait_sk, v, seq, st->num, st->uid);
break;
case TCP_SEQ_STATE_TIME_WAIT:
- get_timewait4_sock(v, seq, st->num, &len);
+ get_timewait4_sock(v, seq, st->num);
break;
}
- seq_printf(seq, "%*s\n", TMPSZ - 1 - len, "");
out:
+ seq_pad(seq, '\n');
return 0;
}
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 74d2c95..31c132c 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2150,7 +2150,7 @@ EXPORT_SYMBOL(udp_proc_unregister);
/* ------------------------------------------------------------------------ */
static void udp4_format_sock(struct sock *sp, struct seq_file *f,
- int bucket, int *len)
+ int bucket)
{
struct inet_sock *inet = inet_sk(sp);
__be32 dest = inet->inet_daddr;
@@ -2159,7 +2159,7 @@ static void udp4_format_sock(struct sock *sp, struct seq_file *f,
__u16 srcp = ntohs(inet->inet_sport);
seq_printf(f, "%5d: %08X:%04X %08X:%04X"
- " %02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %d%n",
+ " %02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %d",
bucket, src, srcp, dest, destp, sp->sk_state,
sk_wmem_alloc_get(sp),
sk_rmem_alloc_get(sp),
@@ -2167,23 +2167,22 @@ static void udp4_format_sock(struct sock *sp, struct seq_file *f,
from_kuid_munged(seq_user_ns(f), sock_i_uid(sp)),
0, sock_i_ino(sp),
atomic_read(&sp->sk_refcnt), sp,
- atomic_read(&sp->sk_drops), len);
+ atomic_read(&sp->sk_drops));
}
int udp4_seq_show(struct seq_file *seq, void *v)
{
+ seq_setwidth(seq, 127);
if (v == SEQ_START_TOKEN)
- seq_printf(seq, "%-127s\n",
- " sl local_address rem_address st tx_queue "
+ seq_puts(seq, " sl local_address rem_address st tx_queue "
"rx_queue tr tm->when retrnsmt uid timeout "
"inode ref pointer drops");
else {
struct udp_iter_state *state = seq->private;
- int len;
- udp4_format_sock(v, seq, state->bucket, &len);
- seq_printf(seq, "%*s\n", 127 - len, "");
+ udp4_format_sock(v, seq, state->bucket);
}
+ seq_pad(seq, '\n');
return 0;
}
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index 77e38f7..008214a 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -595,26 +595,25 @@ static void pn_sock_seq_stop(struct seq_file *seq, void *v)
static int pn_sock_seq_show(struct seq_file *seq, void *v)
{
- int len;
-
+ seq_setwidth(seq, 127);
if (v == SEQ_START_TOKEN)
- seq_printf(seq, "%s%n", "pt loc rem rs st tx_queue rx_queue "
- " uid inode ref pointer drops", &len);
+ seq_puts(seq, "pt loc rem rs st tx_queue rx_queue "
+ " uid inode ref pointer drops");
else {
struct sock *sk = v;
struct pn_sock *pn = pn_sk(sk);
seq_printf(seq, "%2d %04X:%04X:%02X %02X %08X:%08X %5d %lu "
- "%d %pK %d%n",
+ "%d %pK %d",
sk->sk_protocol, pn->sobject, pn->dobject,
pn->resource, sk->sk_state,
sk_wmem_alloc_get(sk), sk_rmem_alloc_get(sk),
from_kuid_munged(seq_user_ns(seq), sock_i_uid(sk)),
sock_i_ino(sk),
atomic_read(&sk->sk_refcnt), sk,
- atomic_read(&sk->sk_drops), &len);
+ atomic_read(&sk->sk_drops));
}
- seq_printf(seq, "%*s\n", 127 - len, "");
+ seq_pad(seq, '\n');
return 0;
}
@@ -785,20 +784,19 @@ static void pn_res_seq_stop(struct seq_file *seq, void *v)
static int pn_res_seq_show(struct seq_file *seq, void *v)
{
- int len;
-
+ seq_setwidth(seq, 63);
if (v == SEQ_START_TOKEN)
- seq_printf(seq, "%s%n", "rs uid inode", &len);
+ seq_puts(seq, "rs uid inode");
else {
struct sock **psk = v;
struct sock *sk = *psk;
- seq_printf(seq, "%02X %5u %lu%n",
+ seq_printf(seq, "%02X %5u %lu",
(int) (psk - pnres.sk),
from_kuid_munged(seq_user_ns(seq), sock_i_uid(sk)),
- sock_i_ino(sk), &len);
+ sock_i_ino(sk));
}
- seq_printf(seq, "%*s\n", 63 - len, "");
+ seq_pad(seq, '\n');
return 0;
}
diff --git a/net/sctp/objcnt.c b/net/sctp/objcnt.c
index 5ea573b..647396b 100644
--- a/net/sctp/objcnt.c
+++ b/net/sctp/objcnt.c
@@ -79,12 +79,13 @@ static sctp_dbg_objcnt_entry_t sctp_dbg_objcnt[] = {
*/
static int sctp_objcnt_seq_show(struct seq_file *seq, void *v)
{
- int i, len;
+ int i;
i = (int)*(loff_t *)v;
- seq_printf(seq, "%s: %d%n", sctp_dbg_objcnt[i].label,
- atomic_read(sctp_dbg_objcnt[i].counter), &len);
- seq_printf(seq, "%*s\n", 127 - len, "");
+ seq_setwidth(seq, 127);
+ seq_printf(seq, "%s: %d", sctp_dbg_objcnt[i].label,
+ atomic_read(sctp_dbg_objcnt[i].counter));
+ seq_pad(seq, '\n');
return 0;
}
--
1.7.1
^ permalink raw reply related
* Re: [PATCH 1/2] remove all uses of printf's %n
From: Joe Perches @ 2013-09-20 4:23 UTC (permalink / raw)
To: Tetsuo Handa
Cc: jslaby, viro, xemul, remi.denis-courmont, keescook, linux-kernel,
netdev, linux-sctp, linux, akpm, dan.carpenter, geert, JBeulich,
kosaki.motohiro
In-Reply-To: <201309201309.GFB52620.OQOtSFLMJVHOFF@I-love.SAKURA.ne.jp>
On Fri, 2013-09-20 at 13:09 +0900, Tetsuo Handa wrote:
> Hello.
Tetsuo-san:
> We are discussing about removal of %n support from vsnprintf() at
> https://lkml.org/lkml/2013/9/16/52 , and you are using %n in seq_printf().
Well, I'm not using (mere alcohol isn't using, right?)
but I still have the same question for Al.
Are there any races here?
> I posted https://lkml.org/lkml/diff/2013/9/19/53/1 which introduces
> seq_setwidth() / seq_pad() which can avoid use of %n in seq_printf().
I still think adding last_len, last_rtn
is sensible.
^ permalink raw reply
* Re: [PATCH 1/2] remove all uses of printf's %n
From: Kees Cook @ 2013-09-20 4:53 UTC (permalink / raw)
To: Joe Perches
Cc: Tetsuo Handa, Jiri Slaby, Al Viro, Pavel Emelyanov,
remi.denis-courmont, LKML, netdev, linux-sctp, George Spelvin,
Andrew Morton, Dan Carpenter, Geert Uytterhoeven, Jan Beulich,
Motohiro KOSAKI
In-Reply-To: <1379650985.2021.12.camel@joe-AO722>
On Thu, Sep 19, 2013 at 9:23 PM, Joe Perches <joe@perches.com> wrote:
> On Fri, 2013-09-20 at 13:09 +0900, Tetsuo Handa wrote:
>> Hello.
>
> Tetsuo-san:
>
>> We are discussing about removal of %n support from vsnprintf() at
>> https://lkml.org/lkml/2013/9/16/52 , and you are using %n in seq_printf().
>
> Well, I'm not using (mere alcohol isn't using, right?)
> but I still have the same question for Al.
>
> Are there any races here?
All the call sites I examined were linear. FWIW, I didn't see any races.
-Kees
>
>> I posted https://lkml.org/lkml/diff/2013/9/19/53/1 which introduces
>> seq_setwidth() / seq_pad() which can avoid use of %n in seq_printf().
>
> I still think adding last_len, last_rtn
> is sensible.
>
>
--
Kees Cook
Chrome OS Security
^ permalink raw reply
* Fw: [Bug 61681] New: Incoming TCP4 connections fail to start, don't get past SYN_RECV and then quickly disappear
From: Stephen Hemminger @ 2013-09-20 5:18 UTC (permalink / raw)
To: netdev
Begin forwarded message:
Date: Thu, 19 Sep 2013 09:42:15 -0700
From: "bugzilla-daemon@bugzilla.kernel.org" <bugzilla-daemon@bugzilla.kernel.org>
To: "stephen@networkplumber.org" <stephen@networkplumber.org>
Subject: [Bug 61681] New: Incoming TCP4 connections fail to start, don't get past SYN_RECV and then quickly disappear
https://bugzilla.kernel.org/show_bug.cgi?id=61681
Bug ID: 61681
Summary: Incoming TCP4 connections fail to start, don't get
past SYN_RECV and then quickly disappear
Product: Networking
Version: 2.5
Kernel Version: Linux xxxxxx 3.4.57-48.42.amzn1.x86_64 #1 SMP Mon Aug
12 21:43:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Hardware: IA-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IPV4
Assignee: shemminger@linux-foundation.org
Reporter: dcrooke@gmail.com
Regression: No
This bug appears to be very rare, but entirely real, and it dates back a long
time. I tried to debug it thoroughly looking at both kernel and webserver
settings, and then got down to looking at netstat.
The Linux kernel can sometimes get into a state where it fails to complete
approx 98% of incoming TCP connection attempts, and only correctly processes
about 2%. These numbers may be relevant as others have posted finding the same
"1 in 50" ratio on much older kernels over the years.
I did not get a chance to capture traffic with iptables / pcap / Wireshark
(production box so we gave up quickly and tried a reboot) but other folks with
the same issue indicate that Linux is sending the wrong remote sequence number
back in the SYN-ACK packet, and the client simply drops it. My experience is
that the half formed connection is torn down almost immediately - I was running
netstat in a continuous loop to see this, others have observed that their
clients send RST in response to the malformed SYN-ACK.
http://serverfault.com/questions/297134/server-not-sending-a-syn-ack-packet-in-response-to-a-syn-packet
http://ask.wireshark.org/questions/23885/rst-after-syn-ack
For us, the problem went away on a reboot and so far has stayed away, so I am
wondering if it is a factor of cumulative traffic but TCP sequence number
wraparound on the Linux end shouldn't cause this afaict, it should be simply
replying to the client with the sequence number that came in the SYN packet.
A number of people have had very similar looking issues due to broken
multi-path network config or a broken NAT device. Obviously this is not the
case here, Amazon knows how to do IT, this box only has one interface, and in
any case the Linux kernel is still responsible for the sequence number it
replies with.
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply
* Re: [PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs
From: Nicolas Ferre @ 2013-09-20 7:37 UTC (permalink / raw)
To: David Miller
Cc: netdev, b.brezillon, f.fainelli, linux-kernel, linux-arm-kernel,
patrice.vilchez, david.choi
In-Reply-To: <20130919.140829.372011462903870193.davem@davemloft.net>
On 19/09/2013 20:08, David Miller :
> From: Nicolas Ferre <nicolas.ferre@atmel.com>
> Date: Thu, 19 Sep 2013 19:40:48 +0200
>
>> From: Patrice Vilchez <patrice.vilchez@atmel.com>
>>
>> All supported Micrel PHYs implement the standard "power down" bit 11 of BMCR,
>> so this patch adds support using the generic genphy_{suspend,resume} functions.
>>
>> Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
>> [b.brezillon@overkiz.com: adapt to newer kernel and generalize to other phys]
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> [nicolas.ferre@atmel.com: commit message modification]
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> Cc: David J. Choi <david.choi@micrel.com>
>
> What's the difference between this patch and the one you sent 60
> seconds beforehand?
No difference, just the addition of Boris in the CC list.
He was missing in the previous one despite his presence in the
"Signed-off-by" tag. I tried to stop "git send-email" before it can
complete but I hit "Ctrl-c" too late it seems...
Sorry for the noise.
Bye,
--
Nicolas Ferre
^ permalink raw reply
* Re: [PATCH 1/2] remove all uses of printf's %n
From: Jiri Slaby @ 2013-09-20 8:08 UTC (permalink / raw)
To: Tetsuo Handa, viro, xemul, remi.denis-courmont
Cc: keescook, linux-kernel, netdev, linux-sctp, linux, akpm,
dan.carpenter, geert, JBeulich, joe, kosaki.motohiro
In-Reply-To: <201309201309.GFB52620.OQOtSFLMJVHOFF@I-love.SAKURA.ne.jp>
On 09/20/2013 06:09 AM, Tetsuo Handa wrote:
> --- a/fs/proc/consoles.c
> +++ b/fs/proc/consoles.c
...
> @@ -47,11 +46,10 @@ static int show_console_dev(struct seq_file *m, void *v)
> con_flags[a].name : ' ';
> flags[a] = 0;
>
> - seq_printf(m, "%s%d%n", con->name, con->index, &len);
> - len = 21 - len;
> - if (len < 1)
> - len = 1;
> - seq_printf(m, "%*c%c%c%c (%s)", len, ' ', con->read ? 'R' : '-',
> + seq_setwidth(m, 21 - 1);
> + seq_printf(m, "%s%d", con->name, con->index);
> + seq_pad(m, ' ');
> + seq_printf(m, "%c%c%c (%s)", con->read ? 'R' : '-',
> con->write ? 'W' : '-', con->unblank ? 'U' : '-',
> flags);
Hello, do you really need seq_setwidth? It makes it really ugly...
Or do we need that all? Couldn't we simply have seq_printf_padded? Or
maybe some % modifier in seq_printf to pad the string?
> --- a/net/ipv4/fib_trie.c
> +++ b/net/ipv4/fib_trie.c
...
> @@ -2548,15 +2549,15 @@ static int fib_route_seq_show(struct seq_file *seq, void *v)
> (fi->fib_advmss ?
> fi->fib_advmss + 40 : 0),
> fi->fib_window,
> - fi->fib_rtt >> 3, &len);
> + fi->fib_rtt >> 3);
> else
> seq_printf(seq,
> "*\t%08X\t%08X\t%04X\t%d\t%u\t"
> - "%d\t%08X\t%d\t%u\t%u%n",
> + "%d\t%08X\t%d\t%u\t%u",
> prefix, 0, flags, 0, 0, 0,
> - mask, 0, 0, 0, &len);
> + mask, 0, 0, 0);
>
> - seq_printf(seq, "%*s\n", 127 - len, "");
> + seq_pad(seq, '\n');
Hmm, seq_pad is unintuitive. I would say it pads the string by '\n'. Of
course it does not, but...
thanks,
--
js
suse labs
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox