* Re: [patch net REPOST 0/3] UFO fixes
From: Hannes Frederic Sowa @ 2013-10-18 17:20 UTC (permalink / raw)
To: Jiri Pirko
Cc: netdev, davem, eric.dumazet, jdmason, yoshfuji, kuznet, jmorris,
kaber, herbert
In-Reply-To: <20131018171524.GC1491@minipsycho.orion>
On Fri, Oct 18, 2013 at 07:15:24PM +0200, Jiri Pirko wrote:
> Hannes, sorry for messed up email address :/
No problem, I got them. ;)
I'll review them again this weekend. Also Jon mailed me that he will
look at the neterion driver this weekend, so this gets finally sorted out.
Thanks,
Hannes
^ permalink raw reply
* Re: [PATCH net-next v2 0/8] tipc: some small patches
From: David Miller @ 2013-10-18 17:22 UTC (permalink / raw)
To: jon.maloy
Cc: netdev, paul.gortmaker, erik.hugne, ying.xue, maloy,
tipc-discussion
In-Reply-To: <1382073801-22128-1-git-send-email-jon.maloy@ericsson.com>
From: Jon Maloy <jon.maloy@ericsson.com>
Date: Fri, 18 Oct 2013 07:23:13 +0200
> Some small and relatively straightforward patches. With exception of
> the two first ones they are all unrelated and address minor issues.
>
> v2: update of v1 (http://patchwork.ozlabs.org/patch/277404/)
>
> -added commit to use memcpy_fromiovec on user data as per v1 feedback
> -updated sparse fix commit to drop chunks covered by above commit
> -added new commit that greatly simplifies the link lookup routine
Series applied, thanks Jon.
^ permalink raw reply
* Re: [PATCH net] tcp: fix incorrect ca_state in tail loss probe
From: Nandita Dukkipati @ 2013-10-18 17:29 UTC (permalink / raw)
To: Neal Cardwell
Cc: Yuchung Cheng, David Miller, Netdev, michael, jwboyer,
Steinar H. Gunderson, dormando
In-Reply-To: <CADVnQymADSKHr6oxr6dN8gdjxf-vtCXOd6xm3neRcWLp7nh9Qg@mail.gmail.com>
On Sun, Oct 13, 2013 at 10:55 PM, Neal Cardwell <ncardwell@google.com> wrote:
>
> On Sat, Oct 12, 2013 at 1:16 PM, Yuchung Cheng <ycheng@google.com> wrote:
> > On receiving an ACK that covers the loss probe sequence, TLP
> > immediately sets the congestion state to Open, even though some packets
> > are not recovered and retransmisssion are on the way. The later ACks
> > may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g.,
> > https://bugzilla.redhat.com/show_bug.cgi?id=989251
> >
> > The fix is to follow the similar procedure in recovery by calling
> > tcp_try_keep_open(). The sender switches to Open state if no packets
> > are retransmissted. Otherwise it goes to Disorder and let subsequent
> > ACKs move the state to Recovery or Open.
> >
> > Reported-By: Michael Sterrett <michael@sterretts.net>
> > Tested-By: Dormando <dormando@rydia.net>
> > Signed-off-by: Yuchung Cheng <ycheng@google.com>
>
> Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
^ permalink raw reply
* Re: for 3.0 : please add "c16a98e ipv6: tcp: fix panic in SYN processing"
From: David Miller @ 2013-10-18 17:31 UTC (permalink / raw)
To: gregkh; +Cc: w, eric.dumazet, netdev, stable
In-Reply-To: <20131018143433.GA27502@kroah.com>
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri, 18 Oct 2013 07:34:33 -0700
> On Fri, Oct 18, 2013 at 04:04:42PM +0200, Willy Tarreau wrote:
>> Greg, David,
>>
>> one of our customers faced a panic in latest 2.6.32 when both somaxconn
>> and the listen backlog are large on an IPv6 socket. It was also reported
>> by one haproxy user on the latest RHEL6 kernel a few months ago. We found
>> that the same bug affects 3.0 up to and including 3.0.100.
>>
>> Eric had already spotted that bug and fixed it in 3.2 with the following
>> patch :
>>
>> commit c16a98ed91597b40b22b540c6517103497ef8e74
>> Author: Eric Dumazet <eric.dumazet@gmail.com>
>> Date: Wed Nov 23 15:49:31 2011 -0500
>>
>> ipv6: tcp: fix panic in SYN processing
>>
>> commit 72a3effaf633bc ([NET]: Size listen hash tables using backlog
>> hint) added a bug allowing inet6_synq_hash() to return an out of bound
>> array index, because of u16 overflow.
>>
>> Bug can happen if system admins set net.core.somaxconn &
>> net.ipv4.tcp_max_syn_backlog sysctls to values greater than 65536
>>
>> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
>> Signed-off-by: David S. Miller <davem@davemloft.net>
>>
>> In practice, the bug extends to lower values as well (32768 and above),
>> because reqsk_queue_alloc() can round the number of entries to double of
>> the backlog by doing roundup_pow_of_two(backlog+1), resulting in
>> inet6_csk_search_req() calling inet6_synq_hash() with too large an integer.
>>
>> Could we please apply it to 3.0 before it finishes its life ?
>
> Unless David objects, I can queue this up just in time for the last
> 3.0.stable.
>
> David?
No objections.
^ permalink raw reply
* [PATCH net-next] tcp: rename tcp_tso_segment()
From: Eric Dumazet @ 2013-10-18 17:36 UTC (permalink / raw)
To: David Miller; +Cc: netdev
From: Eric Dumazet <edumazet@google.com>
Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect
what is going on, and ease grep games.
Signed-off-by: Eric Dumazet <edumazet@google.com>
---
include/net/tcp.h | 2 +-
net/ipv4/tcp_offload.c | 6 +++---
net/ipv6/tcpv6_offload.c | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 1db3a01..372dccc 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1548,7 +1548,7 @@ extern struct request_sock_ops tcp6_request_sock_ops;
void tcp_v4_destroy_sock(struct sock *sk);
-struct sk_buff *tcp_tso_segment(struct sk_buff *skb,
+struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
netdev_features_t features);
struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb);
int tcp_gro_complete(struct sk_buff *skb);
diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index 3a7525e..8e3113f 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -14,7 +14,7 @@
#include <net/tcp.h>
#include <net/protocol.h>
-struct sk_buff *tcp_tso_segment(struct sk_buff *skb,
+struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
netdev_features_t features)
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
@@ -139,7 +139,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb,
out:
return segs;
}
-EXPORT_SYMBOL(tcp_tso_segment);
+EXPORT_SYMBOL(tcp_gso_segment);
struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
{
@@ -320,7 +320,7 @@ static int tcp4_gro_complete(struct sk_buff *skb)
static const struct net_offload tcpv4_offload = {
.callbacks = {
.gso_send_check = tcp_v4_gso_send_check,
- .gso_segment = tcp_tso_segment,
+ .gso_segment = tcp_gso_segment,
.gro_receive = tcp4_gro_receive,
.gro_complete = tcp4_gro_complete,
},
diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c
index 2ec6bf6..c1097c7 100644
--- a/net/ipv6/tcpv6_offload.c
+++ b/net/ipv6/tcpv6_offload.c
@@ -83,7 +83,7 @@ static int tcp6_gro_complete(struct sk_buff *skb)
static const struct net_offload tcpv6_offload = {
.callbacks = {
.gso_send_check = tcp_v6_gso_send_check,
- .gso_segment = tcp_tso_segment,
+ .gso_segment = tcp_gso_segment,
.gro_receive = tcp6_gro_receive,
.gro_complete = tcp6_gro_complete,
},
^ permalink raw reply related
* Re: [net-next 11/14] i40e: reorder block declarations in debugfs
From: David Miller @ 2013-10-18 17:38 UTC (permalink / raw)
To: jeffrey.t.kirsher
Cc: sergei.shtylyov, a, shannon.nelson, netdev, gospo, sassmann,
jesse.brandeburg
In-Reply-To: <1382106892.2034.7.camel@jtkirshe-mobl>
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 18 Oct 2013 07:34:52 -0700
> On Fri, 2013-10-18 at 18:13 +0400, Sergei Shtylyov wrote:
>> On 18-10-2013 17:23, Jeff Kirsher wrote:
>>
>> > From: Shannon Nelson <shannon.nelson@intel.com>
>>
>> > This is a cleanup of the arguments declared at the beginning
>> > of each function.
>>
>> I hope you meant "local variables" because "arguments" are the
>> values
>> passed to a function.
>
> Yes, he meant local variables.
There is probably going to be some other feedback to address, so please
fix this commit message when you respin this series.
Thanks Jeff.
^ permalink raw reply
* Re: [PATCH net-next] tcp: rename tcp_tso_segment()
From: David Miller @ 2013-10-18 17:39 UTC (permalink / raw)
To: eric.dumazet; +Cc: netdev
In-Reply-To: <1382117777.3284.26.camel@edumazet-glaptop.roam.corp.google.com>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 18 Oct 2013 10:36:17 -0700
> From: Eric Dumazet <edumazet@google.com>
>
> Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect
> what is going on, and ease grep games.
>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied, thanks Eric.
^ permalink raw reply
* Re: [net-next 11/14] i40e: reorder block declarations in debugfs
From: Jeff Kirsher @ 2013-10-18 17:42 UTC (permalink / raw)
To: David Miller
Cc: sergei.shtylyov, a, shannon.nelson, netdev, gospo, sassmann,
jesse.brandeburg
In-Reply-To: <20131018.133810.644337234048520007.davem@davemloft.net>
[-- Attachment #1: Type: text/plain, Size: 921 bytes --]
On Fri, 2013-10-18 at 13:38 -0400, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Fri, 18 Oct 2013 07:34:52 -0700
>
> > On Fri, 2013-10-18 at 18:13 +0400, Sergei Shtylyov wrote:
> >> On 18-10-2013 17:23, Jeff Kirsher wrote:
> >>
> >> > From: Shannon Nelson <shannon.nelson@intel.com>
> >>
> >> > This is a cleanup of the arguments declared at the beginning
> >> > of each function.
> >>
> >> I hope you meant "local variables" because "arguments" are the
> >> values
> >> passed to a function.
> >
> > Yes, he meant local variables.
>
> There is probably going to be some other feedback to address, so please
> fix this commit message when you respin this series.
>
> Thanks Jeff.
Ok, I will wait for additional feedback before re-sending the series. I
do not want to waste your time and mine re-spinning the series if there
is additional feedback.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: [PATCH net-next v4 0/8] qlcnic: ethtool enhancements and code cleanup.
From: David Miller @ 2013-10-18 17:42 UTC (permalink / raw)
To: himanshu.madhani; +Cc: netdev, Dept_NX_Linux_NIC_Driver
In-Reply-To: <cover.1382090311.git.himanshu.madhani@qlogic.com>
From: Himanshu Madhani <himanshu.madhani@qlogic.com>
Date: Fri, 18 Oct 2013 12:22:27 -0400
> This patch series contains
>
> o updates to ethtool for pause settings and enhance
> register dump to display mask and ring indices.
> o cleanup in DCB code and remove redundant eSwitch enablement command.
> o fixed firmware dump collection logic to skip unknown entries.
>
> Changes from v3 -> v4
> o Dropped patch for Tx queue validation to be submitted in net.
>
> Changes from v2 -> v3
>
> o Updated patch to print informational messages as per Joe Perches's comment.
>
> Changes from v1 -> v2
>
> o Dropped patch to register device if adapter is in FAILED state for more rework.
> o Updated patch to display ring indices via ethtool per Ben Hutchings's comment.
> o Update patch for DCB cleanup per Stephen Hemminger's comment.
>
> Please apply to net-next.
Series applied, thanks.
^ permalink raw reply
* [cfg80211 / iwlwifi] setting wireless regulatory domain doesn't work.
From: Sander Eikelenboom @ 2013-10-18 17:43 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: Grumbach, Emmanuel, ilw@linux.intel.com, netdev@vger.kernel.org,
linux-wireless@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 794 bytes --]
Hi,
I'm trying to change the regulatory domain for my wireless adapter:
Intel Corporation Centrino Advanced-N 6235
But it fails to change from "world" to anything else (say "US")
I enabled debug options used iwlwifi.debug=0x00043FFF for boot and added some printk's which i think should be triggered .. but they are not.
It seems in function "reg_process_pending_hints" the processing is deferred,
but from the code i don't see how it would ever be triggered to complete ?
Hope some can give some hints to what could be going on ...
Attached:
- full syslog from boot till "iw set reg US", which is done at "Oct 18 21:26:09"
- patch.diff with the added debug printk's against 3.12-rc5 (it also contains the patch that was needed to suppress another warning in the iwlwifi driver.
--
Sander
[-- Attachment #2: patch.diff --]
[-- Type: application/octet-stream, Size: 5512 bytes --]
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index da442b8..1fef524 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -433,27 +433,19 @@ int iwlagn_tx_skb(struct iwl_priv *priv,
/* Copy MAC header from skb into command buffer */
memcpy(tx_cmd->hdr, hdr, hdr_len);
+ txq_id = info->hw_queue;
+
if (is_agg)
txq_id = priv->tid_data[sta_id][tid].agg.txq_id;
else if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
/*
- * Send this frame after DTIM -- there's a special queue
- * reserved for this for contexts that support AP mode.
- */
- txq_id = ctx->mcast_queue;
-
- /*
* The microcode will clear the more data
* bit in the last frame it transmits.
*/
hdr->frame_control |=
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
- } else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN)
- txq_id = IWL_AUX_QUEUE;
- else
- txq_id = ctx->ac_to_queue[skb_get_queue_mapping(skb)];
+ }
- WARN_ON_ONCE(!is_agg && txq_id != info->hw_queue);
WARN_ON_ONCE(is_agg &&
priv->queue_to_mac80211[txq_id] != info->hw_queue);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 9833cdf..e081c03 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -217,12 +217,16 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
mvm->fw->ucode_capa.max_probe_length - 24 - 34;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
- if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels)
+ if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels){
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&mvm->nvm_data->bands[IEEE80211_BAND_2GHZ];
- if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels)
+ IWL_ERR(mvm, "SEIK AP create the 802.11 header with 2.4\n");
+ }
+ if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) {
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&mvm->nvm_data->bands[IEEE80211_BAND_5GHZ];
+ IWL_ERR(mvm, "SEIK AP create the 802.11 header with 5\n");
+ }
hw->wiphy->hw_version = mvm->trans->hw_id;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index de06d5d..4d5dad7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -58,6 +58,8 @@
#include "regdb.h"
#include "nl80211.h"
+#define CONFIG_CFG80211_REG_DEBUG
+
#ifdef CONFIG_CFG80211_REG_DEBUG
#define REG_DBG_PRINT(format, args...) \
printk(KERN_DEBUG pr_fmt(format), ##args)
@@ -758,6 +760,8 @@ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
}
EXPORT_SYMBOL(freq_reg_info);
+#define CONFIG_CFG80211_REG_DEBUG
+
#ifdef CONFIG_CFG80211_REG_DEBUG
static const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
{
@@ -976,8 +980,8 @@ static bool ignore_reg_update(struct wiphy *wiphy,
if (initiator == NL80211_REGDOM_SET_BY_CORE &&
wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
- REG_DBG_PRINT("Ignoring regulatory request %s since the driver uses its own custom regulatory domain\n",
- reg_initiator_name(initiator));
+ REG_DBG_PRINT("Ignoring regulatory request %s since the driver uses its own custom regulatory domain %lx\n",
+ reg_initiator_name(initiator), wiphy->flags);
return true;
}
@@ -993,8 +997,14 @@ static bool ignore_reg_update(struct wiphy *wiphy,
return true;
}
- if (reg_request_cell_base(lr))
+ if (reg_request_cell_base(lr)){
+ REG_DBG_PRINT("Ignoring regulatory request ?? %s: %i\n",
+ reg_initiator_name(initiator), reg_dev_ignore_cell_hint(wiphy));
+
return reg_dev_ignore_cell_hint(wiphy);
+ }
+ REG_DBG_PRINT("NOT Ignoring regulatory request %s \n",
+ reg_initiator_name(initiator));
return false;
}
@@ -1516,6 +1526,7 @@ static void reg_process_hint(struct regulatory_request *reg_request,
enum nl80211_reg_initiator reg_initiator)
{
struct wiphy *wiphy = NULL;
+ REG_DBG_PRINT("SEIK reg_process_hint begin\n");
if (WARN_ON(!reg_request->alpha2))
return;
@@ -1531,14 +1542,19 @@ static void reg_process_hint(struct regulatory_request *reg_request,
switch (__regulatory_hint(wiphy, reg_request)) {
case REG_REQ_ALREADY_SET:
/* This is required so that the orig_* parameters are saved */
- if (wiphy && wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
+ if (wiphy && wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY){
wiphy_update_regulatory(wiphy, reg_initiator);
+ REG_DBG_PRINT("SEIK reg_process_hint already set\n");
+ }
break;
default:
- if (reg_initiator == NL80211_REGDOM_SET_BY_USER)
+ if (reg_initiator == NL80211_REGDOM_SET_BY_USER){
schedule_delayed_work(®_timeout,
msecs_to_jiffies(3142));
+ REG_DBG_PRINT("SEIK reg_process_hint default\n");
+ }
break;
+
}
}
@@ -1558,6 +1574,7 @@ static void reg_process_pending_hints(void)
REG_DBG_PRINT("Pending regulatory request, waiting for it to be processed...\n");
return;
}
+ REG_DBG_PRINT("SEIK regulatory request...at 1\n");
spin_lock(®_requests_lock);
@@ -1572,8 +1589,11 @@ static void reg_process_pending_hints(void)
list_del_init(®_request->list);
spin_unlock(®_requests_lock);
+ REG_DBG_PRINT("SEIK regulatory request...at 2\n");
reg_process_hint(reg_request, reg_request->initiator);
+ REG_DBG_PRINT("SEIK regulatory request...at 3\n");
+
}
/* Processes beacon hints -- this has nothing to do with country IEs */
[-- Attachment #3: syslog --]
[-- Type: application/octet-stream, Size: 152381 bytes --]
Oct 18 20:38:54 creabox kernel: imklog 5.8.11, log source = /proc/kmsg started.
Oct 18 20:38:54 creabox rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2509" x-info="http://www.rsyslog.com"] start
Oct 18 20:38:54 creabox kernel: [ 0.018361] dmar: DRHD base: 0x000000fed90000 flags: 0x0
Oct 18 20:38:54 creabox kernel: [ 0.018436] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
Oct 18 20:38:54 creabox kernel: [ 0.018521] dmar: DRHD base: 0x000000fed91000 flags: 0x1
Oct 18 20:38:54 creabox kernel: [ 0.018593] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
Oct 18 20:38:54 creabox kernel: [ 0.018679] dmar: RMRR base: 0x000000dbe07000 end: 0x000000dbe13fff
Oct 18 20:38:54 creabox kernel: [ 0.018748] dmar: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
Oct 18 20:38:54 creabox kernel: [ 0.018889] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
Oct 18 20:38:54 creabox kernel: [ 0.018958] HPET id 0 under DRHD base 0xfed91000
Oct 18 20:38:54 creabox kernel: [ 0.019225] Enabled IRQ remapping in x2apic mode
Oct 18 20:38:54 creabox kernel: [ 0.019293] Enabling x2apic
Oct 18 20:38:54 creabox kernel: [ 0.019357] Enabled x2apic
Oct 18 20:38:54 creabox kernel: [ 0.019434] Switched APIC routing to cluster x2apic.
Oct 18 20:38:54 creabox kernel: [ 0.019964] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 18 20:38:54 creabox kernel: [ 0.059695] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
Oct 18 20:38:54 creabox kernel: [ 0.059927] TSC deadline timer enabled
Oct 18 20:38:54 creabox kernel: [ 0.060000] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
Oct 18 20:38:54 creabox kernel: [ 0.060313] ... version: 3
Oct 18 20:38:54 creabox kernel: [ 0.060379] ... bit width: 48
Oct 18 20:38:54 creabox kernel: [ 0.060444] ... generic registers: 4
Oct 18 20:38:54 creabox kernel: [ 0.060508] ... value mask: 0000ffffffffffff
Oct 18 20:38:54 creabox kernel: [ 0.060576] ... max period: 0000ffffffffffff
Oct 18 20:38:54 creabox kernel: [ 0.060642] ... fixed-purpose events: 3
Oct 18 20:38:54 creabox kernel: [ 0.060707] ... event mask: 000000070000000f
Oct 18 20:38:54 creabox kernel: [ 0.074786] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Oct 18 20:38:54 creabox kernel: [ 0.061090] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
Oct 18 20:38:54 creabox kernel: [ 0.102455] Brought up 4 CPUs
Oct 18 20:38:54 creabox kernel: [ 0.102523] smpboot: Total of 4 processors activated (18358.08 BogoMIPS)
Oct 18 20:38:54 creabox kernel: [ 0.106859] devtmpfs: initialized
Oct 18 20:38:54 creabox kernel: [ 0.107820] xor: automatically using best checksumming function:
Oct 18 20:38:54 creabox kernel: [ 0.146580] avx : 12154.000 MB/sec
Oct 18 20:38:54 creabox kernel: [ 0.146718] NET: Registered protocol family 16
Oct 18 20:38:54 creabox kernel: [ 0.147109] cpuidle: using governor ladder
Oct 18 20:38:54 creabox kernel: [ 0.147177] cpuidle: using governor menu
Oct 18 20:38:54 creabox kernel: [ 0.147459] ACPI: bus type PCI registered
Oct 18 20:38:54 creabox kernel: [ 0.147526] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Oct 18 20:38:54 creabox kernel: [ 0.147649] dca service started, version 1.12.1
Oct 18 20:38:54 creabox kernel: [ 0.147739] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Oct 18 20:38:54 creabox kernel: [ 0.147828] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Oct 18 20:38:54 creabox kernel: [ 0.152548] PCI: Using configuration type 1 for base access
Oct 18 20:38:54 creabox kernel: [ 0.156142] bio: create slab <bio-0> at 0
Oct 18 20:38:54 creabox kernel: [ 0.222583] raid6: sse2x1 4583 MB/s
Oct 18 20:38:54 creabox kernel: [ 0.290571] raid6: sse2x2 5735 MB/s
Oct 18 20:38:54 creabox kernel: [ 0.358561] raid6: sse2x4 6506 MB/s
Oct 18 20:38:54 creabox kernel: [ 0.358630] raid6: using algorithm sse2x4 (6506 MB/s)
Oct 18 20:38:54 creabox kernel: [ 0.358696] raid6: using ssse3x2 recovery algorithm
Oct 18 20:38:54 creabox kernel: [ 0.358813] ACPI: Added _OSI(Module Device)
Oct 18 20:38:54 creabox kernel: [ 0.358882] ACPI: Added _OSI(Processor Device)
Oct 18 20:38:54 creabox kernel: [ 0.358948] ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 18 20:38:54 creabox kernel: [ 0.359014] ACPI: Added _OSI(Processor Aggregator Device)
Oct 18 20:38:54 creabox kernel: [ 0.360898] ACPI: EC: Look up EC in DSDT
Oct 18 20:38:54 creabox kernel: [ 0.362948] ACPI: Executed 1 blocks of module-level executable AML code
Oct 18 20:38:54 creabox kernel: [ 0.375173] ACPI: SSDT 00000000dbe1d018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.375822] ACPI: Dynamic OEM Table Load:
Oct 18 20:38:54 creabox kernel: [ 0.375979] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.390913] ACPI: SSDT 00000000dbe1ea98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.391609] ACPI: Dynamic OEM Table Load:
Oct 18 20:38:54 creabox kernel: [ 0.391767] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.402713] ACPI: SSDT 00000000dbe1fc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.403346] ACPI: Dynamic OEM Table Load:
Oct 18 20:38:54 creabox kernel: [ 0.403502] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.415421] ACPI: Interpreter enabled
Oct 18 20:38:54 creabox kernel: [ 0.415494] ACPI: (supports S0 S5)
Oct 18 20:38:54 creabox kernel: [ 0.415562] ACPI: Using IOAPIC for interrupt routing
Oct 18 20:38:54 creabox kernel: [ 0.415666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 18 20:38:54 creabox kernel: [ 0.415974] ACPI: No dock devices found.
Oct 18 20:38:54 creabox kernel: [ 0.426273] ACPI: Power Resource [FN00] (off)
Oct 18 20:38:54 creabox kernel: [ 0.426463] ACPI: Power Resource [FN01] (off)
Oct 18 20:38:54 creabox kernel: [ 0.426658] ACPI: Power Resource [FN02] (off)
Oct 18 20:38:54 creabox kernel: [ 0.426840] ACPI: Power Resource [FN03] (off)
Oct 18 20:38:54 creabox kernel: [ 0.427026] ACPI: Power Resource [FN04] (off)
Oct 18 20:38:54 creabox kernel: [ 0.427944] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Oct 18 20:38:54 creabox kernel: [ 0.428388] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
Oct 18 20:38:54 creabox kernel: [ 0.429133] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
Oct 18 20:38:54 creabox kernel: [ 0.429903] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430225] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430298] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430367] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430435] PCI host bridge to bus 0000:00
Oct 18 20:38:54 creabox kernel: [ 0.430501] pci_bus 0000:00: root bus resource [bus 00-3e]
Oct 18 20:38:54 creabox kernel: [ 0.430569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Oct 18 20:38:54 creabox kernel: [ 0.430644] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Oct 18 20:38:54 creabox kernel: [ 0.430714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Oct 18 20:38:54 creabox kernel: [ 0.430786] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
Oct 18 20:38:54 creabox kernel: [ 0.430854] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
Oct 18 20:38:54 creabox kernel: [ 0.430925] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
Oct 18 20:38:54 creabox kernel: [ 0.430995] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
Oct 18 20:38:54 creabox kernel: [ 0.431064] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
Oct 18 20:38:54 creabox kernel: [ 0.431134] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
Oct 18 20:38:54 creabox kernel: [ 0.431202] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
Oct 18 20:38:54 creabox kernel: [ 0.431281] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
Oct 18 20:38:54 creabox kernel: [ 0.431485] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
Oct 18 20:38:54 creabox kernel: [ 0.431569] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.431649] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Oct 18 20:38:54 creabox kernel: [ 0.431739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
Oct 18 20:38:54 creabox kernel: [ 0.431960] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
Oct 18 20:38:54 creabox kernel: [ 0.432055] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.432207] pci 0000:00:14.0: PME# supported from D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.432351] pci 0000:00:14.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.432478] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
Oct 18 20:38:54 creabox kernel: [ 0.432571] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c00f 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.432729] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.432915] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
Oct 18 20:38:54 creabox kernel: [ 0.432999] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
Oct 18 20:38:54 creabox kernel: [ 0.433077] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3a000-0xf7d3afff]
Oct 18 20:38:54 creabox kernel: [ 0.433345] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
Oct 18 20:38:54 creabox kernel: [ 0.433436] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
Oct 18 20:38:54 creabox kernel: [ 0.433512] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff]
Oct 18 20:38:54 creabox kernel: [ 0.433590] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
Oct 18 20:38:54 creabox kernel: [ 0.433729] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.433870] pci 0000:00:19.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.433992] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
Oct 18 20:38:54 creabox kernel: [ 0.434080] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff]
Oct 18 20:38:54 creabox kernel: [ 0.434250] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.434416] pci 0000:00:1a.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.434540] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
Oct 18 20:38:54 creabox kernel: [ 0.434628] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.434785] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.434932] pci 0000:00:1b.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.435049] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
Oct 18 20:38:54 creabox kernel: [ 0.435249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.435403] pci 0000:00:1c.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.435524] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
Oct 18 20:38:54 creabox kernel: [ 0.435723] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.435877] pci 0000:00:1c.2: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.436009] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
Oct 18 20:38:54 creabox kernel: [ 0.436100] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
Oct 18 20:38:54 creabox kernel: [ 0.436271] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.436430] pci 0000:00:1d.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.436549] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
Oct 18 20:38:54 creabox kernel: [ 0.436848] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
Oct 18 20:38:54 creabox kernel: [ 0.436938] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
Oct 18 20:38:54 creabox kernel: [ 0.437015] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
Oct 18 20:38:54 creabox kernel: [ 0.437090] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
Oct 18 20:38:54 creabox kernel: [ 0.437167] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
Oct 18 20:38:54 creabox kernel: [ 0.437243] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
Oct 18 20:38:54 creabox kernel: [ 0.437320] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff]
Oct 18 20:38:54 creabox kernel: [ 0.437443] pci 0000:00:1f.2: PME# supported from D3hot
Oct 18 20:38:54 creabox kernel: [ 0.437624] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
Oct 18 20:38:54 creabox kernel: [ 0.437713] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.437807] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
Oct 18 20:38:54 creabox kernel: [ 0.438101] pci 0000:00:1c.0: PCI bridge to [bus 01]
Oct 18 20:38:54 creabox kernel: [ 0.439894] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
Oct 18 20:38:54 creabox kernel: [ 0.440147] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.440943] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.441173] pci 0000:02:00.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.447727] pci 0000:00:1c.2: PCI bridge to [bus 02]
Oct 18 20:38:54 creabox kernel: [ 0.447804] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
Oct 18 20:38:54 creabox kernel: [ 0.448569] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.449200] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Oct 18 20:38:54 creabox kernel: [ 0.449932] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.450557] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.451178] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.451810] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Oct 18 20:38:54 creabox kernel: [ 0.452537] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.453165] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.454007] ACPI: Enabled 6 GPEs in block 00 to 3F
Oct 18 20:38:54 creabox kernel: [ 0.454167] ACPI: \_SB_.PCI0: notify handler is installed
Oct 18 20:38:54 creabox kernel: [ 0.454309] Found 1 acpi root devices
Oct 18 20:38:54 creabox kernel: [ 0.454485] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Oct 18 20:38:54 creabox kernel: [ 0.454572] vgaarb: loaded
Oct 18 20:38:54 creabox kernel: [ 0.454638] vgaarb: bridge control possible 0000:00:02.0
Oct 18 20:38:54 creabox kernel: [ 0.454834] SCSI subsystem initialized
Oct 18 20:38:54 creabox kernel: [ 0.454957] libata version 3.00 loaded.
Oct 18 20:38:54 creabox kernel: [ 0.455049] ACPI: bus type USB registered
Oct 18 20:38:54 creabox kernel: [ 0.455137] usbcore: registered new interface driver usbfs
Oct 18 20:38:54 creabox kernel: [ 0.455219] usbcore: registered new interface driver hub
Oct 18 20:38:54 creabox kernel: [ 0.455330] usbcore: registered new device driver usb
Oct 18 20:38:54 creabox kernel: [ 0.455424] pps_core: LinuxPPS API ver. 1 registered
Oct 18 20:38:54 creabox kernel: [ 0.455491] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 18 20:38:54 creabox kernel: [ 0.455578] PTP clock support registered
Oct 18 20:38:54 creabox kernel: [ 0.455687] wmi: Mapper loaded
Oct 18 20:38:54 creabox kernel: [ 0.455778] Advanced Linux Sound Architecture Driver Initialized.
Oct 18 20:38:54 creabox kernel: [ 0.455849] PCI: Using ACPI for IRQ routing
Oct 18 20:38:54 creabox kernel: [ 0.457781] PCI: pci_cache_line_size set to 64 bytes
Oct 18 20:38:54 creabox kernel: [ 0.457960] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
Oct 18 20:38:54 creabox kernel: [ 0.458032] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458100] e820: reserve RAM buffer [mem 0xdb9f1000-0xdbffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458168] e820: reserve RAM buffer [mem 0xdc20e000-0xdfffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458238] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458307] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458565] cfg80211: SEIK regulatory request...at 1
Oct 18 20:38:54 creabox kernel: [ 0.458636] cfg80211: SEIK regulatory request...at 2
Oct 18 20:38:54 creabox kernel: [ 0.458702] cfg80211: SEIK reg_process_hint begin
Oct 18 20:38:54 creabox kernel: [ 0.458770] cfg80211: Calling CRDA to update world regulatory domain
Oct 18 20:38:54 creabox kernel: [ 0.458845] cfg80211: SEIK regulatory request...at 3
Oct 18 20:38:54 creabox kernel: [ 0.459204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Oct 18 20:38:54 creabox kernel: [ 0.459666] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Oct 18 20:38:54 creabox kernel: [ 0.461762] Switched to clocksource hpet
Oct 18 20:38:54 creabox kernel: [ 0.467410] FS-Cache: Loaded
Oct 18 20:38:54 creabox kernel: [ 0.467540] CacheFiles: Loaded
Oct 18 20:38:54 creabox kernel: [ 0.467621] pnp: PnP ACPI init
Oct 18 20:38:54 creabox kernel: [ 0.467696] ACPI: bus type PNP registered
Oct 18 20:38:54 creabox kernel: [ 0.467830] pnp 00:00: [dma 4]
Oct 18 20:38:54 creabox kernel: [ 0.467923] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
Oct 18 20:38:54 creabox kernel: [ 0.468024] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
Oct 18 20:38:54 creabox kernel: [ 0.468236] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
Oct 18 20:38:54 creabox kernel: [ 0.468362] system 00:03: [io 0x0680-0x069f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468433] system 00:03: [io 0x1000-0x100f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468502] system 00:03: [io 0xffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468570] system 00:03: [io 0xffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468640] system 00:03: [io 0x0400-0x0453] could not be reserved
Oct 18 20:38:54 creabox kernel: [ 0.468711] system 00:03: [io 0x0458-0x047f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468781] system 00:03: [io 0x0500-0x057f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468850] system 00:03: [io 0x164e-0x164f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468919] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469033] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469163] system 00:05: [io 0x0454-0x0457] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469234] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469491] system 00:06: [io 0x0a00-0x0a1f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469561] system 00:06: [io 0x0a30-0x0a3f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469632] system 00:06: [io 0x0a20-0x0a2f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469701] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469881] system 00:07: [io 0x04d0-0x04d1] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469956] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.470063] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
Oct 18 20:38:54 creabox kernel: [ 0.470193] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
Oct 18 20:38:54 creabox kernel: [ 0.470593] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470667] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470737] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470807] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470877] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470949] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471021] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
Oct 18 20:38:54 creabox kernel: [ 0.471091] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471162] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471232] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
Oct 18 20:38:54 creabox kernel: [ 0.471303] system 00:0a: [mem 0xdfa00000-0xdfa00fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471373] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.471714] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471788] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471859] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 18 20:38:54 creabox kernel: [ 0.471957] pnp: PnP ACPI: found 12 devices
Oct 18 20:38:54 creabox kernel: [ 0.472024] ACPI: bus type PNP unregistered
Oct 18 20:38:54 creabox kernel: [ 0.479427] pci 0000:00:1c.0: PCI bridge to [bus 01]
Oct 18 20:38:54 creabox kernel: [ 0.479515] pci 0000:00:1c.2: PCI bridge to [bus 02]
Oct 18 20:38:54 creabox kernel: [ 0.479588] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
Oct 18 20:38:54 creabox kernel: [ 0.479670] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Oct 18 20:38:54 creabox kernel: [ 0.479740] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Oct 18 20:38:54 creabox kernel: [ 0.479806] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Oct 18 20:38:54 creabox kernel: [ 0.479877] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
Oct 18 20:38:54 creabox kernel: [ 0.479947] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
Oct 18 20:38:54 creabox kernel: [ 0.480017] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
Oct 18 20:38:54 creabox kernel: [ 0.480085] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
Oct 18 20:38:54 creabox kernel: [ 0.480155] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
Oct 18 20:38:54 creabox kernel: [ 0.480225] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
Oct 18 20:38:54 creabox kernel: [ 0.480295] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
Oct 18 20:38:54 creabox kernel: [ 0.480365] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
Oct 18 20:38:54 creabox kernel: [ 0.480509] NET: Registered protocol family 2
Oct 18 20:38:54 creabox kernel: [ 0.480893] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481244] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481492] TCP: Hash tables configured (established 65536 bind 65536)
Oct 18 20:38:54 creabox kernel: [ 0.481586] TCP: reno registered
Oct 18 20:38:54 creabox kernel: [ 0.481667] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481800] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481969] NET: Registered protocol family 1
Oct 18 20:38:54 creabox kernel: [ 0.482048] pci 0000:00:02.0: Boot video device
Oct 18 20:38:54 creabox kernel: [ 0.521914] PCI: CLS 64 bytes, default 64
Oct 18 20:38:54 creabox kernel: [ 0.522028] Trying to unpack rootfs image as initramfs...
Oct 18 20:38:54 creabox kernel: [ 0.716431] Freeing initrd memory: 9280K (ffff880036dd0000 - ffff8800376e0000)
Oct 18 20:38:54 creabox kernel: [ 0.716528] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 18 20:38:54 creabox kernel: [ 0.716600] software IO TLB [mem 0xd79f1000-0xdb9f1000] (64MB) mapped at [ffff8800d79f1000-ffff8800db9f0fff]
Oct 18 20:38:54 creabox kernel: [ 0.717567] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717655] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717732] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717811] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717927] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Oct 18 20:38:54 creabox kernel: [ 0.725753] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Oct 18 20:38:54 creabox kernel: [ 0.728315] sha1_ssse3: Using AVX optimized SHA-1 implementation
Oct 18 20:38:54 creabox kernel: [ 0.728716] audit: initializing netlink socket (disabled)
Oct 18 20:38:54 creabox kernel: [ 0.728799] type=2000 audit(1382121527.724:1): initialized
Oct 18 20:38:54 creabox kernel: [ 0.769866] bounce pool size: 64 pages
Oct 18 20:38:54 creabox kernel: [ 0.769941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 18 20:38:54 creabox kernel: [ 0.770614] VFS: Disk quotas dquot_6.5.2
Oct 18 20:38:54 creabox kernel: [ 0.770712] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.771209] FS-Cache: Netfs 'cifs' registered for caching
Oct 18 20:38:54 creabox kernel: [ 0.771324] Key type cifs.spnego registered
Oct 18 20:38:54 creabox kernel: [ 0.771401] Key type cifs.idmap registered
Oct 18 20:38:54 creabox kernel: [ 0.771472] NTFS driver 2.1.30 [Flags: R/W].
Oct 18 20:38:54 creabox kernel: [ 0.771642] fuse init (API version 7.22)
Oct 18 20:38:54 creabox kernel: [ 0.771851] bio: create slab <bio-1> at 1
Oct 18 20:38:54 creabox kernel: [ 0.772098] Btrfs loaded
Oct 18 20:38:54 creabox kernel: [ 0.772174] msgmni has been set to 15821
Oct 18 20:38:54 creabox kernel: [ 0.777121] alg: No test for stdrng (krng)
Oct 18 20:38:54 creabox kernel: [ 0.783352] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Oct 18 20:38:54 creabox kernel: [ 0.783506] NET: Registered protocol family 38
Oct 18 20:38:54 creabox kernel: [ 0.783602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Oct 18 20:38:54 creabox kernel: [ 0.783687] io scheduler noop registered
Oct 18 20:38:54 creabox kernel: [ 0.783753] io scheduler deadline registered
Oct 18 20:38:54 creabox kernel: [ 0.783839] io scheduler cfq registered (default)
Oct 18 20:38:54 creabox kernel: [ 0.784180] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 0.784499] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 0.784707] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
Oct 18 20:38:54 creabox kernel: [ 0.784786] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
Oct 18 20:38:54 creabox kernel: [ 0.784878] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
Oct 18 20:38:54 creabox kernel: [ 0.784952] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
Oct 18 20:38:54 creabox kernel: [ 0.785027] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
Oct 18 20:38:54 creabox kernel: [ 0.785112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 18 20:38:54 creabox kernel: [ 0.785197] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 18 20:38:54 creabox kernel: [ 0.785270] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
Oct 18 20:38:54 creabox kernel: [ 0.785355] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
Oct 18 20:38:54 creabox kernel: [ 0.785438] cpcihp_generic: not configured, disabling.
Oct 18 20:38:54 creabox kernel: [ 0.785517] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 18 20:38:54 creabox kernel: [ 0.787487] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Oct 18 20:38:54 creabox kernel: [ 0.787608] vmlfb: initializing
Oct 18 20:38:54 creabox kernel: [ 0.787811] uvesafb: failed to execute /sbin/v86d
Oct 18 20:38:54 creabox kernel: [ 0.787881] uvesafb: make sure that the v86d helper is installed and executable
Oct 18 20:38:54 creabox kernel: [ 0.787964] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
Oct 18 20:38:54 creabox kernel: [ 0.788034] uvesafb: vbe_init() failed with -22
Oct 18 20:38:54 creabox kernel: [ 0.788105] uvesafb: probe of uvesafb.0 failed with error -22
Oct 18 20:38:54 creabox kernel: [ 0.789642] vga16fb: initializing
Oct 18 20:38:54 creabox kernel: [ 0.789707] vga16fb: mapped to 0xffff8800000a0000
Oct 18 20:38:54 creabox kernel: [ 0.883473] Console: switching to colour frame buffer device 80x30
Oct 18 20:38:54 creabox kernel: [ 0.890665] fb0: VGA16 VGA frame buffer device
Oct 18 20:38:54 creabox kernel: [ 0.890930] intel_idle: MWAIT substates: 0x21120
Oct 18 20:38:54 creabox kernel: [ 0.891196] intel_idle: v0.4 model 0x3A
Oct 18 20:38:54 creabox kernel: [ 0.891439] intel_idle: lapic_timer_reliable_states 0xffffffff
Oct 18 20:38:54 creabox kernel: [ 0.891897] ipmi message handler version 39.2
Oct 18 20:38:54 creabox kernel: [ 0.904038] ipmi device interface
Oct 18 20:38:54 creabox kernel: [ 0.916247] IPMI System Interface driver.
Oct 18 20:38:54 creabox kernel: [ 0.928363] ipmi_si: Adding default-specified kcs state machine
Oct 18 20:38:54 creabox kernel: [ 0.940563] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Oct 18 20:38:54 creabox kernel: [ 0.964230] ipmi_si: Interface detection failed
Oct 18 20:38:54 creabox kernel: [ 0.993556] ipmi_si: Adding default-specified smic state machine
Oct 18 20:38:54 creabox kernel: [ 1.005504] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
Oct 18 20:38:54 creabox kernel: [ 1.029477] ipmi_si: Interface detection failed
Oct 18 20:38:54 creabox kernel: [ 1.085580] ipmi_si: Adding default-specified bt state machine
Oct 18 20:38:54 creabox kernel: [ 1.097546] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
Oct 18 20:38:54 creabox kernel: [ 1.120978] ipmi_si: Interface detection failed
Oct 18 20:38:54 creabox kernel: [ 1.153594] ipmi_si: Unable to find any System Interface(s)
Oct 18 20:38:54 creabox kernel: [ 1.165332] IPMI Watchdog: driver initialized
Oct 18 20:38:54 creabox kernel: [ 1.176980] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Oct 18 20:38:54 creabox kernel: [ 1.200056] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Oct 18 20:38:54 creabox kernel: [ 1.222642] ACPI: Power Button [PWRB]
Oct 18 20:38:54 creabox kernel: [ 1.234099] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Oct 18 20:38:54 creabox kernel: [ 1.256831] ACPI: Power Button [PWRF]
Oct 18 20:38:54 creabox kernel: [ 1.268437] ACPI: Fan [FAN0] (off)
Oct 18 20:38:54 creabox kernel: [ 1.279774] ACPI: Fan [FAN1] (off)
Oct 18 20:38:54 creabox kernel: [ 1.291016] ACPI: Fan [FAN2] (off)
Oct 18 20:38:54 creabox kernel: [ 1.302160] ACPI: Fan [FAN3] (off)
Oct 18 20:38:54 creabox kernel: [ 1.313160] ACPI: Fan [FAN4] (off)
Oct 18 20:38:54 creabox kernel: [ 1.324055] ACPI: Requesting acpi_cpufreq
Oct 18 20:38:54 creabox kernel: [ 1.362156] thermal LNXTHERM:00: registered as thermal_zone0
Oct 18 20:38:54 creabox kernel: [ 1.373090] ACPI: Thermal Zone [TZ00] (28 C)
Oct 18 20:38:54 creabox kernel: [ 1.384136] thermal LNXTHERM:01: registered as thermal_zone1
Oct 18 20:38:54 creabox kernel: [ 1.394846] ACPI: Thermal Zone [TZ01] (30 C)
Oct 18 20:38:54 creabox kernel: [ 1.405325] GHES: HEST is not enabled!
Oct 18 20:38:54 creabox kernel: [ 1.415589] ioatdma: Intel(R) QuickData Technology Driver 4.00
Oct 18 20:38:54 creabox kernel: [ 1.426146] xenfs: not registering filesystem on non-xen platform
Oct 18 20:38:54 creabox kernel: [ 1.436557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 18 20:38:54 creabox kernel: [ 1.467509] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
Oct 18 20:38:54 creabox kernel: [ 1.488436] Non-volatile memory driver v1.3
Oct 18 20:38:54 creabox kernel: [ 1.499202] Linux agpgart interface v0.103
Oct 18 20:38:54 creabox kernel: [ 1.509628] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Oct 18 20:38:54 creabox kernel: [ 1.531420] Hangcheck: Using getrawmonotonic().
Oct 18 20:38:54 creabox kernel: [ 1.542677] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
Oct 18 20:38:54 creabox kernel: [ 1.601408] [drm] Initialized drm 1.1.0 20060810
Oct 18 20:38:54 creabox kernel: [ 1.612014] drm/i810 does not support SMP
Oct 18 20:38:54 creabox kernel: [ 1.623287] [drm] Memory usable by graphics device = 2048M
Oct 18 20:38:54 creabox kernel: [ 1.633638] checking generic (a0000 10000) vs hw (e0000000 10000000)
Oct 18 20:38:54 creabox kernel: [ 1.643982] fb: conflicting fb hw usage inteldrmfb vs VGA16 VGA - removing generic driver
Oct 18 20:38:54 creabox kernel: [ 1.683615] Console: switching to colour VGA+ 80x25
Oct 18 20:38:54 creabox kernel: [ 1.684515] i915 0000:00:02.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 1.707257] i915 0000:00:02.0: irq 44 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 1.707338] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 18 20:38:54 creabox kernel: [ 1.707407] [drm] Driver supports precise vblank timestamp query.
Oct 18 20:38:54 creabox kernel: [ 1.707602] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Oct 18 20:38:54 creabox kernel: [ 1.713148] tsc: Refined TSC clocksource calibration: 2294.787 MHz
Oct 18 20:38:54 creabox kernel: [ 1.805086] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
Oct 18 20:38:54 creabox kernel: [ 1.875295] fbcon: inteldrmfb (fb0) is primary device
Oct 18 20:38:54 creabox kernel: [ 2.078247] Console: switching to colour frame buffer device 210x65
Oct 18 20:38:54 creabox kernel: [ 2.086197] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Oct 18 20:38:54 creabox kernel: [ 2.086243] i915 0000:00:02.0: registered panic notifier
Oct 18 20:38:54 creabox kernel: [ 2.114469] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Oct 18 20:38:54 creabox kernel: [ 2.114598] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
Oct 18 20:38:54 creabox kernel: [ 2.114693] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 18 20:38:54 creabox kernel: [ 2.116595] brd: module loaded
Oct 18 20:38:54 creabox kernel: [ 2.117534] loop: module loaded
Oct 18 20:38:54 creabox kernel: [ 2.117857] nbd: registered device at major 43
Oct 18 20:38:54 creabox kernel: [ 2.119495] events: mcg drbd: 7
Oct 18 20:38:54 creabox kernel: [ 2.123716] drbd: initialized. Version: 8.4.3 (api:1/proto:86-101)
Oct 18 20:38:54 creabox kernel: [ 2.123772] drbd: built-in
Oct 18 20:38:54 creabox kernel: [ 2.123795] drbd: registered as block device major 147
Oct 18 20:38:54 creabox kernel: [ 2.124031] mei_me 0000:00:16.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.124133] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.128082] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 2.128180] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 2.128259] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 2.128349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 2.128428] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 2.128520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 2.128598] lpc_ich: Resource conflict(s) found affecting gpio_ich
Oct 18 20:38:54 creabox kernel: [ 2.128690] Loading iSCSI transport class v2.0-870.
Oct 18 20:38:54 creabox kernel: [ 2.128926] hv_vmbus: registering driver hv_storvsc
Oct 18 20:38:54 creabox kernel: [ 2.129056] ahci 0000:00:1f.2: version 3.0
Oct 18 20:38:54 creabox kernel: [ 2.129263] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.129377] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
Oct 18 20:38:54 creabox kernel: [ 2.129440] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Oct 18 20:38:54 creabox kernel: [ 2.129502] ahci 0000:00:1f.2: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.130267] scsi0 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.130526] scsi1 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.130698] scsi2 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.130850] scsi3 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.131013] scsi4 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.131158] scsi5 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.131235] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 46
Oct 18 20:38:54 creabox kernel: [ 2.131291] ata2: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.131312] ata3: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.131332] ata4: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.131352] ata5: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.132840] ata6: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.134397] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Oct 18 20:38:54 creabox kernel: [ 2.136467] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
Oct 18 20:38:54 creabox kernel: [ 2.138646] libphy: Fixed MDIO Bus: probed
Oct 18 20:38:54 creabox kernel: [ 2.140374] tun: Universal TUN/TAP device driver, 1.6
Oct 18 20:38:54 creabox kernel: [ 2.142044] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 18 20:38:54 creabox kernel: [ 2.143788] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Oct 18 20:38:54 creabox kernel: [ 2.145515] e100: Copyright(c) 1999-2006 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.147322] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Oct 18 20:38:54 creabox kernel: [ 2.149134] e1000: Copyright (c) 1999-2006 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.150969] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
Oct 18 20:38:54 creabox kernel: [ 2.152816] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.154849] e1000e 0000:00:19.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.156820] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Oct 18 20:38:54 creabox kernel: [ 2.158836] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.365213] e1000e 0000:00:19.0 eth0: registered PHC clock
Oct 18 20:38:54 creabox kernel: [ 2.367253] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:a8:6b:fa:7b:3c
Oct 18 20:38:54 creabox kernel: [ 2.369341] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Oct 18 20:38:54 creabox kernel: [ 2.371474] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Oct 18 20:38:54 creabox kernel: [ 2.373614] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
Oct 18 20:38:54 creabox kernel: [ 2.375755] igb: Copyright (c) 2007-2013 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.377951] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
Oct 18 20:38:54 creabox kernel: [ 2.380180] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.382470] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
Oct 18 20:38:54 creabox kernel: [ 2.384746] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.387031] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k
Oct 18 20:38:54 creabox kernel: [ 2.389338] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.391656] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
Oct 18 20:38:54 creabox kernel: [ 2.393982] ixgb: Copyright (c) 1999-2008 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.396329] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
Oct 18 20:38:54 creabox kernel: [ 2.398616] ipw2100: Copyright(c) 2003-2006 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.400913] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmprq
Oct 18 20:38:54 creabox kernel: [ 2.403214] ipw2200: Copyright(c) 2003-2006 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.405560] libipw: 802.11 data/management/control stack, git-1.1.13
Oct 18 20:38:54 creabox kernel: [ 2.407881] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Oct 18 20:38:54 creabox kernel: [ 2.410264] Intel(R) Wireless WiFi driver for Linux, in-tree:d
Oct 18 20:38:54 creabox kernel: [ 2.412603] Copyright(c) 2003-2013 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.415195] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.417755] iwlwifi 0000:02:00.0: U iwl_request_firmware attempting to load firmware EXPERIMENTAL 'iwlwifi-6000g2b-exp.ucode'
Oct 18 20:38:54 creabox kernel: [ 2.420254] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d
Oct 18 20:38:54 creabox kernel: [ 2.422654] iwl4965: Copyright(c) 2003-2011 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.425038] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
Oct 18 20:38:54 creabox kernel: [ 2.427387] iwl3945: Copyright(c) 2003-2011 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.429853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 18 20:38:54 creabox kernel: [ 2.432150] ehci-pci: EHCI PCI platform driver
Oct 18 20:38:54 creabox kernel: [ 2.434584] ehci-pci 0000:00:1a.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.436832] ehci-pci 0000:00:1a.0: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.439165] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Oct 18 20:38:54 creabox kernel: [ 2.441424] ehci-pci 0000:00:1a.0: debug port 2
Oct 18 20:38:54 creabox kernel: [ 2.447546] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Oct 18 20:38:54 creabox kernel: [ 2.449816] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000
Oct 18 20:38:54 creabox kernel: [ 2.456846] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 18 20:38:54 creabox kernel: [ 2.459841] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 20:38:54 creabox kernel: [ 2.462107] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.462148] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Oct 18 20:38:54 creabox kernel: [ 2.462206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 20:38:54 creabox kernel: [ 2.462208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.462209] usb usb1: Product: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.462211] usb usb1: Manufacturer: Linux 3.12.0-rc5+ ehci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.462212] usb usb1: SerialNumber: 0000:00:1a.0
Oct 18 20:38:54 creabox kernel: [ 2.462409] hub 1-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.462417] hub 1-0:1.0: 3 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.462746] ehci-pci 0000:00:1d.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.462753] ehci-pci 0000:00:1d.0: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.462828] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 18 20:38:54 creabox kernel: [ 2.462845] ehci-pci 0000:00:1d.0: debug port 2
Oct 18 20:38:54 creabox kernel: [ 2.466733] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Oct 18 20:38:54 creabox kernel: [ 2.466756] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000
Oct 18 20:38:54 creabox kernel: [ 2.472763] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Oct 18 20:38:54 creabox kernel: [ 2.472805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 20:38:54 creabox kernel: [ 2.472807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.472808] usb usb2: Product: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.472810] usb usb2: Manufacturer: Linux 3.12.0-rc5+ ehci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.472811] usb usb2: SerialNumber: 0000:00:1d.0
Oct 18 20:38:54 creabox kernel: [ 2.472969] hub 2-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.472977] hub 2-0:1.0: 3 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.473157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 18 20:38:54 creabox kernel: [ 2.473159] ohci-pci: OHCI PCI platform driver
Oct 18 20:38:54 creabox kernel: [ 2.473173] ohci-platform: OHCI generic platform driver
Oct 18 20:38:54 creabox kernel: [ 2.473182] uhci_hcd: USB Universal Host Controller Interface driver
Oct 18 20:38:54 creabox kernel: [ 2.524793] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.524932] xhci_hcd 0000:00:14.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.524936] xhci_hcd 0000:00:14.0: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525012] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Oct 18 20:38:54 creabox kernel: [ 2.525119] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Oct 18 20:38:54 creabox kernel: [ 2.525149] xhci_hcd 0000:00:14.0: irq 49 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.525224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 20:38:54 creabox kernel: [ 2.525226] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.525227] usb usb3: Product: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525229] usb usb3: Manufacturer: Linux 3.12.0-rc5+ xhci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.525230] usb usb3: SerialNumber: 0000:00:14.0
Oct 18 20:38:54 creabox kernel: [ 2.525372] hub 3-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.525383] hub 3-0:1.0: 4 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.525843] xhci_hcd 0000:00:14.0: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525900] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Oct 18 20:38:54 creabox kernel: [ 2.525948] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
Oct 18 20:38:54 creabox kernel: [ 2.525950] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.525952] usb usb4: Product: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525953] usb usb4: Manufacturer: Linux 3.12.0-rc5+ xhci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.525954] usb usb4: SerialNumber: 0000:00:14.0
Oct 18 20:38:54 creabox kernel: [ 2.526084] hub 4-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.526095] hub 4-0:1.0: 4 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.573313] ata1.00: supports DRM functions and may not be fully accessible
Oct 18 20:38:54 creabox kernel: [ 2.578378] ata1.00: ATA-9: Crucial_CT120M500SSD3, MU03, max UDMA/133
Oct 18 20:38:54 creabox kernel: [ 2.580415] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Oct 18 20:38:54 creabox kernel: [ 2.586591] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 20:38:54 creabox kernel: [ 2.588615] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.588816] i8042: PNP: No PS/2 controller found. Probing ports directly.
Oct 18 20:38:54 creabox kernel: [ 2.592630] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.594911] ata1.00: supports DRM functions and may not be fully accessible
Oct 18 20:38:54 creabox kernel: [ 2.603683] ata1.00: configured for UDMA/133
Oct 18 20:38:54 creabox kernel: [ 2.606513] scsi 0:0:0:0: Direct-Access ATA Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
Oct 18 20:38:54 creabox kernel: [ 2.608790] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 18 20:38:54 creabox kernel: [ 2.608823] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
Oct 18 20:38:54 creabox kernel: [ 2.608825] sd 0:0:0:0: [sda] 4096-byte physical blocks
Oct 18 20:38:54 creabox kernel: [ 2.608932] sd 0:0:0:0: [sda] Write Protect is off
Oct 18 20:38:54 creabox kernel: [ 2.608935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 18 20:38:54 creabox kernel: [ 2.608969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 20:38:54 creabox kernel: [ 2.609532] sda: sda1
Oct 18 20:38:54 creabox kernel: [ 2.609906] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 18 20:38:54 creabox kernel: [ 3.627952] i8042: No controller found
Oct 18 20:38:54 creabox kernel: [ 3.630668] Switched to clocksource tsc
Oct 18 20:38:54 creabox kernel: [ 3.630794] mousedev: PS/2 mouse device common for all mice
Oct 18 20:38:54 creabox kernel: [ 3.630990] rtc_cmos 00:04: RTC can wake from S4
Oct 18 20:38:54 creabox kernel: [ 3.631140] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 18 20:38:54 creabox kernel: [ 3.631175] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Oct 18 20:38:54 creabox kernel: [ 3.631352] i2c /dev entries driver
Oct 18 20:38:54 creabox kernel: [ 3.631870] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 3.631872] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 3.631983] pps_ldisc: PPS line discipline registered
Oct 18 20:38:54 creabox kernel: [ 3.637109] w83627ehf: Found NCT6776F chip at 0xa30
Oct 18 20:38:54 creabox kernel: [ 3.645223] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Oct 18 20:38:54 creabox kernel: [ 3.645270] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Oct 18 20:38:54 creabox kernel: [ 3.645295] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
Oct 18 20:38:54 creabox kernel: [ 3.645359] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 18 20:38:54 creabox kernel: [ 3.645365] iTCO_vendor_support: vendor-support=0
Oct 18 20:38:54 creabox kernel: [ 3.645397] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Oct 18 20:38:54 creabox kernel: [ 3.651811] device-mapper: uevent: version 1.0.3
Oct 18 20:38:54 creabox kernel: [ 3.656306] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
Oct 18 20:38:54 creabox kernel: [ 3.667598] Intel P-state driver initializing.
Oct 18 20:38:54 creabox kernel: [ 3.667608] Intel pstate controlling: cpu 0
Oct 18 20:38:54 creabox kernel: [ 3.667629] Intel pstate controlling: cpu 1
Oct 18 20:38:54 creabox kernel: [ 3.667646] Intel pstate controlling: cpu 2
Oct 18 20:38:54 creabox kernel: [ 3.667660] Intel pstate controlling: cpu 3
Oct 18 20:38:54 creabox kernel: [ 3.667712] leds_ss4200: no LED devices found
Oct 18 20:38:54 creabox kernel: [ 3.667729] hidraw: raw HID events driver (C) Jiri Kosina
Oct 18 20:38:54 creabox kernel: [ 3.667823] usbcore: registered new interface driver usbhid
Oct 18 20:38:54 creabox kernel: [ 3.667823] usbhid: USB HID core driver
Oct 18 20:38:54 creabox kernel: [ 3.667827] hv_utils: Registering HyperV Utility Driver
Oct 18 20:38:54 creabox kernel: [ 3.667828] hv_vmbus: registering driver hv_util
Oct 18 20:38:54 creabox kernel: [ 3.667892] usbcore: registered new interface driver snd-usb-audio
Oct 18 20:38:54 creabox kernel: [ 3.667903] usbcore: registered new interface driver snd-ua101
Oct 18 20:38:54 creabox kernel: [ 3.667913] usbcore: registered new interface driver snd-usb-usx2y
Oct 18 20:38:54 creabox kernel: [ 3.667923] usbcore: registered new interface driver snd-usb-us122l
Oct 18 20:38:54 creabox kernel: [ 3.667933] usbcore: registered new interface driver snd-usb-caiaq
Oct 18 20:38:54 creabox kernel: [ 3.667941] usbcore: registered new interface driver snd-usb-6fire
Oct 18 20:38:54 creabox kernel: [ 3.667951] usbcore: registered new interface driver snd-usb-hiface
Oct 18 20:38:54 creabox kernel: [ 3.669209] drop_monitor: Initializing network drop monitor service
Oct 18 20:38:54 creabox kernel: [ 3.669224] GACT probability on
Oct 18 20:38:54 creabox kernel: [ 3.669225] Mirror/redirect action on
Oct 18 20:38:54 creabox kernel: [ 3.669226] Simple TC action Loaded
Oct 18 20:38:54 creabox kernel: [ 3.669307] netem: version 1.3
Oct 18 20:38:54 creabox kernel: [ 3.669308] u32 classifier
Oct 18 20:38:54 creabox kernel: [ 3.669309] Performance counters on
Oct 18 20:38:54 creabox kernel: [ 3.669309] input device check on
Oct 18 20:38:54 creabox kernel: [ 3.669309] Actions configured
Oct 18 20:38:54 creabox kernel: [ 3.669312] Netfilter messages via NETLINK v0.30.
Oct 18 20:38:54 creabox kernel: [ 3.669314] nfnl_acct: registering with nfnetlink.
Oct 18 20:38:54 creabox kernel: [ 3.669323] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Oct 18 20:38:54 creabox kernel: [ 3.672376] ctnetlink v0.93: registering with nfnetlink.
Oct 18 20:38:54 creabox kernel: [ 3.673882] xt_time: kernel timezone is -0000
Oct 18 20:38:54 creabox kernel: [ 3.673884] ip_set: protocol 6
Oct 18 20:38:54 creabox kernel: [ 3.673889] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
Oct 18 20:38:54 creabox kernel: [ 3.675399] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
Oct 18 20:38:54 creabox kernel: [ 3.675428] IPVS: Creating netns size=2048 id=0
Oct 18 20:38:54 creabox kernel: [ 3.675433] IPVS: ipvs loaded.
Oct 18 20:38:54 creabox kernel: [ 3.675435] IPVS: [rr] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675435] IPVS: [wrr] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675436] IPVS: [lc] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675436] IPVS: [wlc] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675438] IPVS: [lblc] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675440] IPVS: [lblcr] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675441] IPVS: [dh] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675441] IPVS: [sh] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675442] IPVS: [sed] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675442] IPVS: [nq] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675525] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 18 20:38:54 creabox kernel: [ 3.675558] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
Oct 18 20:38:54 creabox kernel: [ 3.675566] arp_tables: (C) 2002 David S. Miller
Oct 18 20:38:54 creabox kernel: [ 3.675575] TCP: cubic registered
Oct 18 20:38:54 creabox kernel: [ 3.675576] Initializing XFRM netlink socket
Oct 18 20:38:54 creabox kernel: [ 3.675579] NET: Registered protocol family 17
Oct 18 20:38:54 creabox kernel: [ 3.675582] NET: Registered protocol family 15
Oct 18 20:38:54 creabox kernel: [ 3.676917] Bridge firewalling registered
Oct 18 20:38:54 creabox kernel: [ 3.676919] Ebtables v2.0 registered
Oct 18 20:38:54 creabox kernel: [ 3.684138] usb 1-1: new high-speed USB device number 2 using ehci-pci
Oct 18 20:38:54 creabox kernel: [ 3.741573] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
Oct 18 20:38:54 creabox kernel: [ 3.756181] NET: Registered protocol family 33
Oct 18 20:38:54 creabox kernel: [ 3.757212] Key type rxrpc registered
Oct 18 20:38:54 creabox kernel: [ 3.758214] Key type rxrpc_s registered
Oct 18 20:38:54 creabox kernel: [ 3.759209] 8021q: 802.1Q VLAN Support v1.8
Oct 18 20:38:54 creabox kernel: [ 3.760218] lib80211: common routines for IEEE802.11 drivers
Oct 18 20:38:54 creabox kernel: [ 3.761169] lib80211_crypt: registered algorithm 'NULL'
Oct 18 20:38:54 creabox kernel: [ 3.762109] lib80211_crypt: registered algorithm 'WEP'
Oct 18 20:38:54 creabox kernel: [ 3.763030] lib80211_crypt: registered algorithm 'CCMP'
Oct 18 20:38:54 creabox kernel: [ 3.763945] lib80211_crypt: registered algorithm 'TKIP'
Oct 18 20:38:54 creabox kernel: [ 3.764899] Key type dns_resolver registered
Oct 18 20:38:54 creabox kernel: [ 3.766712] registered taskstats version 1
Oct 18 20:38:54 creabox kernel: [ 3.768154] console [netcon0] enabled
Oct 18 20:38:54 creabox kernel: [ 3.769154] netconsole: network logging started
Oct 18 20:38:54 creabox kernel: [ 3.770200] rtc_cmos 00:04: setting system clock to 2013-10-18 18:38:50 UTC (1382121530)
Oct 18 20:38:54 creabox kernel: [ 3.771241] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 18 20:38:54 creabox kernel: [ 3.772230] EDD information not available.
Oct 18 20:38:54 creabox kernel: [ 3.773237] ALSA device list:
Oct 18 20:38:54 creabox kernel: [ 3.774188] No soundcards found.
Oct 18 20:38:54 creabox kernel: [ 3.776327] Freeing unused kernel memory: 1140K (ffffffff81f1e000 - ffffffff8203b000)
Oct 18 20:38:54 creabox kernel: [ 3.777319] Write protecting the kernel read-only data: 14336k
Oct 18 20:38:54 creabox kernel: [ 3.780434] Freeing unused kernel memory: 816K (ffff880001934000 - ffff880001a00000)
Oct 18 20:38:54 creabox kernel: [ 3.782175] Freeing unused kernel memory: 276K (ffff880001dbb000 - ffff880001e00000)
Oct 18 20:38:54 creabox kernel: [ 3.816486] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
Oct 18 20:38:54 creabox kernel: [ 3.818006] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 20:38:54 creabox kernel: [ 3.819778] hub 1-1:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 3.821484] hub 1-1:1.0: 6 ports detected
Oct 18 20:38:54 creabox kernel: [ 3.853966] iwlwifi 0000:02:00.0: U iwl_request_firmware attempting to load firmware 'iwlwifi-6000g2b-6.ucode'
Oct 18 20:38:54 creabox kernel: [ 3.855820] iwlwifi 0000:02:00.0: U iwl_req_fw_callback Loaded firmware file 'iwlwifi-6000g2b-6.ucode' (679436 bytes).
Oct 18 20:38:54 creabox kernel: [ 3.857441] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr runtime inst size = 159932
Oct 18 20:38:54 creabox kernel: [ 3.859056] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr runtime data size = 81920
Oct 18 20:38:54 creabox kernel: [ 3.860705] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr init inst size = 130228
Oct 18 20:38:54 creabox kernel: [ 3.862319] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr init data size = 81920
Oct 18 20:38:54 creabox kernel: [ 3.863826] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
Oct 18 20:38:54 creabox kernel: [ 3.865466] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
Oct 18 20:38:54 creabox kernel: [ 3.867050] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
Oct 18 20:38:54 creabox kernel: [ 3.868611] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
Oct 18 20:38:54 creabox kernel: [ 3.870066] iwlwifi 0000:02:00.0: U iwl_op_mode_dvm_start *** LOAD DRIVER ***
Oct 18 20:38:54 creabox kernel: [ 3.871393] iwlwifi 0000:02:00.0: U iwl_op_mode_dvm_start BT channel inhibition is On
Oct 18 20:38:54 creabox kernel: [ 3.872653] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
Oct 18 20:38:54 creabox kernel: [ 3.874020] iwlwifi 0000:02:00.0: U iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
Oct 18 20:38:54 creabox kernel: [ 3.875379] iwlwifi 0000:02:00.0: U iwl_pcie_set_hw_ready hardware ready
Oct 18 20:38:54 creabox kernel: [ 3.876666] iwlwifi 0000:02:00.0: U iwl_pcie_apm_init Init card's basic functions
Oct 18 20:38:54 creabox kernel: [ 3.877899] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 18 20:38:54 creabox kernel: [ 3.885782] iwlwifi 0000:02:00.0: U iwl_read_eeprom NVM size = 2048
Oct 18 20:38:54 creabox kernel: [ 3.886942] iwlwifi 0000:02:00.0: U iwl_eeprom_verify_signature EEPROM signature=0x00000001
Oct 18 20:38:54 creabox kernel: [ 3.888150] iwlwifi 0000:02:00.0: U iwl_eeprom_acquire_semaphore Acquired semaphore after 1 tries.
Oct 18 20:38:54 creabox kernel: [ 3.900344] iwlwifi 0000:02:00.0: U iwl_read_eeprom NVM Type: OTP
Oct 18 20:38:54 creabox kernel: [ 3.901644] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop Stop card, put in low power state
Oct 18 20:38:54 creabox kernel: [ 3.902837] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop_master stop master
Oct 18 20:38:54 creabox kernel: [ 3.904091] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.905331] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.906554] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.907771] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.908968] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.910148] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.911314] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.912473] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.913645] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.914796] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.915955] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.917133] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.918279] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.919405] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.920546] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.921684] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.922799] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.923902] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.925017] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.926114] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.927195] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.928302] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.929400] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.930475] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.931542] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.932634] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.933709] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.934762] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.935771] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.936010] usb 2-1: new high-speed USB device number 2 using ehci-pci
Oct 18 20:38:54 creabox kernel: [ 3.937874] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.938951] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.940033] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.941099] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.942151] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.943213] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.944300] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.945390] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.946435] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.947470] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.948522] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.949576] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.950580] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.951560] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.952540] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.953512] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.954463] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.955408] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.956360] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.957296] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.958206] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.959110] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.960034] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.960978] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.961882] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.962764] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.963637] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.964521] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID (0x01)
Oct 18 20:38:54 creabox kernel: [ 3.965400] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.966273] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.967156] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID 40MHZ (0x09)
Oct 18 20:38:54 creabox kernel: [ 3.968056] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.968955] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.969845] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 3.970730] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.971605] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.972529] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 3.973464] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.974391] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.975346] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 3.976341] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x18 chain_B: 0X16 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.977349] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x04 Low 20_on_40: 0x04
Oct 18 20:38:54 creabox kernel: [ 3.978360] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 3.979381] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.980424] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.981491] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 3.982534] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.983595] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.984686] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 3.985782] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.986872] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.988012] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 60: VALID BAND_52G OFDM COMMON_TYPE (0x87)
Oct 18 20:38:54 creabox kernel: [ 3.989162] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.990306] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.991473] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 60: VALID BAND_52G OFDM HT_AP COMMON_TYPE (0x97)
Oct 18 20:38:54 creabox kernel: [ 3.992699] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.993918] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.995131] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 102: VALID BAND_52G OFDM 40MHZ HT_AP COMMON_TYPE (0x9f)
Oct 18 20:38:54 creabox kernel: [ 3.996391] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.997648] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.998911] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 120: VALID BAND_52G OFDM COMMON_TYPE (0x87)
Oct 18 20:38:54 creabox kernel: [ 4.000210] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.001523] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.002824] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 120: VALID BAND_52G OFDM HT_AP COMMON_TYPE (0x97)
Oct 18 20:38:54 creabox kernel: [ 4.004145] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.005436] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.006733] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 140: VALID BAND_52G OFDM COMMON_TYPE (0x87)
Oct 18 20:38:54 creabox kernel: [ 4.008030] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.009320] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.010597] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 136: VALID BAND_52G OFDM HT_AP COMMON_TYPE (0x97)
Oct 18 20:38:54 creabox kernel: [ 4.011874] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.013174] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.014497] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 1: VALID (0x01)
Oct 18 20:38:54 creabox kernel: [ 4.015808] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.017157] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.018512] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 1: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.019853] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x19 chain_B: 0X18 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.021236] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.022642] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 1: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.024061] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x17 chain_B: 0X16 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.025492] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.026930] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 2: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.028398] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.029880] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.031364] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 2: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.032887] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.034402] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.035912] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 10: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.037432] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.038981] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.040556] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 10: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.042136] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.043687] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.045278] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 11: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.046850] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x19 chain_B: 0X18 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.048427] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.050013] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 11: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.051564] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x16 chain_B: 0X16 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.053166] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x14 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.054750] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 13: VALID (0x01)
Oct 18 20:38:54 creabox kernel: [ 4.056326] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.057899] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.059469] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 13: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.061048] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1a chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.062623] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.064207] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 13: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.065781] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1a chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.067329] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.068925] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 3: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.070489] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x10 chain_B: 0X0f chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.072085] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x0c MIMO3: 0x00 High 20_on_40: 0x0c Low 20_on_40: 0x06
Oct 18 20:38:54 creabox kernel: [ 4.072247] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
Oct 18 20:38:54 creabox kernel: [ 4.072249] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 20:38:54 creabox kernel: [ 4.072528] hub 2-1:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 4.072625] hub 2-1:1.0: 8 ports detected
Oct 18 20:38:54 creabox kernel: [ 4.080594] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 4: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.082269] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.084536] microcode: CPU0 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.086210] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x12 chain_B: 0X10 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.086224] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.086550] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.086572] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.086909] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.086927] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.087261] microcode: CPU3 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.098426] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x10 MIMO3: 0x00 High 20_on_40: 0x0a Low 20_on_40: 0x06
Oct 18 20:38:54 creabox kernel: [ 4.100215] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 5: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.101918] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x16 chain_B: 0X15 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.103606] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x14 MIMO3: 0x00 High 20_on_40: 0x08 Low 20_on_40: 0x06
Oct 18 20:38:54 creabox kernel: [ 4.105305] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 7: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.106893] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x14 chain_B: 0X14 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.108482] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x12 MIMO3: 0x00 High 20_on_40: 0x06 Low 20_on_40: 0x08
Oct 18 20:38:54 creabox kernel: [ 4.110087] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 8: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.111665] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x13 chain_B: 0X11 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.113253] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x0f MIMO3: 0x00 High 20_on_40: 0x06 Low 20_on_40: 0x0a
Oct 18 20:38:54 creabox kernel: [ 4.114850] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 9: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.116444] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x11 chain_B: 0X0f chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.118028] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x0d MIMO3: 0x00 High 20_on_40: 0x06 Low 20_on_40: 0x0c
Oct 18 20:38:54 creabox kernel: [ 4.119607] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 10: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.121199] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X18 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.122783] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x04
Oct 18 20:38:54 creabox kernel: [ 4.124399] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 11: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.125978] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x18 chain_B: 0X17 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.127540] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.129139] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 36: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.130730] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.132320] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.133916] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 36: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.135485] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x19 chain_B: 0X1b chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.137071] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.138667] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 64: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.140263] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.141849] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.143427] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 64: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.145024] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.146725] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.148332] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 100: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.149929] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.151499] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.153101] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 100: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.154699] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.156302] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.157905] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 140: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.159478] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.161071] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.162673] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 140: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.164272] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.165866] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.167452] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 38: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.169058] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x14 chain_B: 0X14 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.170656] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x10 MIMO3: 0x00 High 20_on_40: 0x0a Low 20_on_40: 0x08
Oct 18 20:38:54 creabox kernel: [ 4.172366] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 46: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.174129] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.175825] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.177537] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 62: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.179238] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x14 chain_B: 0X15 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.180946] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x11 MIMO3: 0x00 High 20_on_40: 0x08 Low 20_on_40: 0x0a
Oct 18 20:38:54 creabox kernel: [ 4.182636] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 102: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.184352] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1a chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.186057] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.187757] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.189456] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.191137] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.192783] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.194395] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.195996] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.197580] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.199153] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.200711] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.202251] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.203749] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.205150] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.206552] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.207958] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.209361] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.210748] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.212151] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.213513] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.214842] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.216199] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.217532] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.218830] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.220136] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.221434] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.222701] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.223968] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.225215] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.226428] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.227623] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.228822] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.230005] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.231147] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.232293] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.233431] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.234533] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.235617] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.236713] iwlwifi 0000:02:00.0: U iwl_nvm_check_version device EEPROM VER=0x756, CALIB=0x6
Oct 18 20:38:54 creabox kernel: [ 4.237799] iwlwifi 0000:02:00.0: U iwl_eeprom_init_hw_params Device SKU: 24GHz enabled, 52GHz enabled, 11.n enabled
Oct 18 20:38:54 creabox kernel: [ 4.238877] iwlwifi 0000:02:00.0: U iwl_eeprom_init_hw_params Valid Tx ant: 0x3, Valid Rx ant: 0x3
Oct 18 20:38:54 creabox kernel: [ 4.239973] iwlwifi 0000:02:00.0: U iwl_op_mode_dvm_start MAC address: b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 4.241061] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 4.242225] iwlwifi 0000:02:00.0: U iwl_tt_initialize Initialize Thermal Throttling
Oct 18 20:38:54 creabox kernel: [ 4.243302] iwlwifi 0000:02:00.0: U iwl_tt_initialize Advanced Thermal Throttling
Oct 18 20:38:54 creabox kernel: [ 4.244491] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 1401ed
Oct 18 20:38:54 creabox kernel: [ 4.245706] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Oct 18 20:38:54 creabox kernel: [ 4.248884] bio: create slab <bio-2> at 2
Oct 18 20:38:54 creabox kernel: [ 4.294665] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 20:38:54 creabox kernel: [ 4.415813] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
Oct 18 20:38:54 creabox kernel: [ 4.512006] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
Oct 18 20:38:54 creabox kernel: [ 4.513659] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 20:38:54 creabox kernel: [ 4.741165] EXT4-fs (dm-0): re-mounted. Opts: (null)
Oct 18 20:38:54 creabox kernel: [ 4.770619] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
Oct 18 20:38:54 creabox kernel: [ 4.967861] Adding 1949692k swap on /dev/mapper/creabox-creabox_swap. Priority:-1 extents:1 across:1949692k SS
Oct 18 20:38:54 creabox kernel: [ 5.125964] iwlwifi 0000:02:00.0: U iwlagn_mac_start enter
Oct 18 20:38:54 creabox kernel: [ 5.127398] iwlwifi 0000:02:00.0: I iwl_prep_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.128832] iwlwifi 0000:02:00.0: I iwl_prep_station Add STA to driver ID 14: ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.130201] iwlwifi 0000:02:00.0: U iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
Oct 18 20:38:54 creabox kernel: [ 5.131553] iwlwifi 0000:02:00.0: U iwl_pcie_set_hw_ready hardware ready
Oct 18 20:38:54 creabox kernel: [ 5.132876] iwlwifi 0000:02:00.0: U iwl_pcie_apm_init Init card's basic functions
Oct 18 20:38:54 creabox kernel: [ 5.134230] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 18 20:38:54 creabox kernel: [ 5.142113] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
Oct 18 20:38:54 creabox kernel: [ 5.189000] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.191379] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.193743] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0900, 72 bytes at 0[0]:9
Oct 18 20:38:54 creabox kernel: [ 5.196211] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.198680] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.200166] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.201619] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0901, 12 bytes at 1[1]:9
Oct 18 20:38:54 creabox kernel: [ 5.203209] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.205857] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.207423] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.208965] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PROT_ENV (#cd), seq: 0x0902, 8 bytes at 2[2]:9
Oct 18 20:38:54 creabox kernel: [ 5.210591] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.213235] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.214889] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.216504] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command CALIBRATION_CFG_CMD (#65), seq: 0x0903, 96 bytes at 3[3]:9
Oct 18 20:38:54 creabox kernel: [ 5.218253] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.445009] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop Stop card, put in low power state
Oct 18 20:38:54 creabox kernel: [ 5.446708] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop_master stop master
Oct 18 20:38:54 creabox kernel: [ 5.448400] iwlwifi 0000:02:00.0: U iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
Oct 18 20:38:54 creabox kernel: [ 5.450061] iwlwifi 0000:02:00.0: U iwl_pcie_set_hw_ready hardware ready
Oct 18 20:38:54 creabox kernel: [ 5.451711] iwlwifi 0000:02:00.0: U iwl_pcie_apm_init Init card's basic functions
Oct 18 20:38:54 creabox kernel: [ 5.453372] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 18 20:38:54 creabox kernel: [ 5.461504] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
Oct 18 20:38:54 creabox kernel: [ 5.508853] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.510526] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.512165] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0900, 72 bytes at 0[0]:9
Oct 18 20:38:54 creabox kernel: [ 5.513855] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.515531] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.517179] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.518800] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0901, 12 bytes at 1[1]:9
Oct 18 20:38:54 creabox kernel: [ 5.520495] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.522146] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.523789] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.525388] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0902, 12 bytes at 2[2]:9
Oct 18 20:38:54 creabox kernel: [ 5.527057] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.528702] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.530297] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.531870] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0903, 12 bytes at 3[3]:9
Oct 18 20:38:54 creabox kernel: [ 5.533537] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.535178] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.536807] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.538411] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0904, 520 bytes at 4[4]:9
Oct 18 20:38:54 creabox kernel: [ 5.540137] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.541838] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.543492] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.545123] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0905, 1352 bytes at 5[5]:9
Oct 18 20:38:54 creabox kernel: [ 5.546925] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.548610] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.550476] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.552229] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0906, 92 bytes at 6[6]:9
Oct 18 20:38:54 creabox kernel: [ 5.554042] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.556377] iwlwifi 0000:02:00.0: U iwl_alive_start Runtime Alive received.
Oct 18 20:38:54 creabox kernel: [ 5.558599] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_CONFIG
Oct 18 20:38:54 creabox kernel: [ 5.560376] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_CONFIG
Oct 18 20:38:54 creabox kernel: [ 5.562252] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0907, 76 bytes at 7[7]:9
Oct 18 20:38:54 creabox kernel: [ 5.564087] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_CONFIG
Oct 18 20:38:54 creabox kernel: [ 5.565893] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PRIO_TABLE
Oct 18 20:38:54 creabox kernel: [ 5.567696] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PRIO_TABLE
Oct 18 20:38:54 creabox kernel: [ 5.569456] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PRIO_TABLE (#cc), seq: 0x0908, 20 bytes at 8[8]:9
Oct 18 20:38:54 creabox kernel: [ 5.571285] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PRIO_TABLE
Oct 18 20:38:54 creabox kernel: [ 5.573002] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.574842] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.576659] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PROT_ENV (#cd), seq: 0x0909, 8 bytes at 9[9]:9
Oct 18 20:38:54 creabox kernel: [ 5.578510] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.580298] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.582160] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.583998] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PROT_ENV (#cd), seq: 0x090A, 8 bytes at 10[10]:9
Oct 18 20:38:54 creabox kernel: [ 5.585854] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.587623] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.589337] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.591037] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command CALIBRATION_CFG_CMD (#65), seq: 0x090B, 96 bytes at 11[11]:9
Oct 18 20:38:54 creabox kernel: [ 5.592878] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.594611] iwlwifi 0000:02:00.0: U iwlagn_send_tx_ant_config select valid tx ant: 3
Oct 18 20:38:54 creabox kernel: [ 5.596361] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command TX_ANT_CONFIGURATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.598084] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.599809] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TX_ANT_CONFIGURATION_CMD (#98), seq: 0x090C, 8 bytes at 12[12]:9
Oct 18 20:38:54 creabox kernel: [ 5.620752] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.622514] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.624264] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x090D, 8 bytes at 13[13]:9
Oct 18 20:38:54 creabox kernel: [ 5.626006] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd RX CONFIG:
Oct 18 20:38:54 creabox kernel: [ 5.626073] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.629464] iwl data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Oct 18 20:38:54 creabox kernel: [ 5.631202] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 0f 00 00 ...........$....
Oct 18 20:38:54 creabox kernel: [ 5.632927] iwl data: 00000020: 05 80 00 00 00 00 00 00 01 00 ff ff ff 00 00 00 ................
Oct 18 20:38:54 creabox kernel: [ 5.634644] iwl data: 00000030: 00 00 ..
Oct 18 20:38:54 creabox kernel: [ 5.636402] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 channel: 0x1
Oct 18 20:38:54 creabox kernel: [ 5.638131] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 flags: 0x00008005
Oct 18 20:38:54 creabox kernel: [ 5.639864] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000000
Oct 18 20:38:54 creabox kernel: [ 5.641577] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 dev_type: 0x3
Oct 18 20:38:54 creabox kernel: [ 5.643286] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
Oct 18 20:38:54 creabox kernel: [ 5.644980] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
Oct 18 20:38:54 creabox kernel: [ 5.646650] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] node_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.648313] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.649975] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
Oct 18 20:38:54 creabox kernel: [ 5.651608] iwlwifi 0000:02:00.0: U iwl_full_rxon_required need full RXON - !iwl_is_associated_ctx(ctx)
Oct 18 20:38:54 creabox kernel: [ 5.653243] iwlwifi 0000:02:00.0: U iwlagn_commit_rxon Going to commit RXON
Oct 18 20:38:54 creabox kernel: [ 5.653243] * without RXON_FILTER_ASSOC_MSK
Oct 18 20:38:54 creabox kernel: [ 5.653243] * channel = 1
Oct 18 20:38:54 creabox kernel: [ 5.653243] * bssid = 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.659691] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.661307] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.662920] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x090E, 54 bytes at 14[14]:9
Oct 18 20:38:54 creabox kernel: [ 5.665818] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.667484] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.667490] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations Clearing ucode stations in driver
Oct 18 20:38:54 creabox kernel: [ 5.667492] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations No active stations found to be cleared
Oct 18 20:38:54 creabox kernel: [ 5.667495] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations ... start.
Oct 18 20:38:54 creabox kernel: [ 5.667496] iwlwifi 0000:02:00.0: I iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.667499] iwlwifi 0000:02:00.0: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
Oct 18 20:38:54 creabox kernel: [ 5.667500] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.667502] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.667504] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x090F, 96 bytes at 15[15]:9
Oct 18 20:38:54 creabox kernel: [ 5.681860] iwlwifi 0000:02:00.0: U iwl_process_add_sta_resp Processing response for adding station 15
Oct 18 20:38:54 creabox kernel: [ 5.683472] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp REPLY_ADD_STA PASSED
Oct 18 20:38:54 creabox kernel: [ 5.685037] iwlwifi 0000:02:00.0: I iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
Oct 18 20:38:54 creabox kernel: [ 5.686600] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.688152] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.689702] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.691292] iwlwifi 0000:02:00.0: U is_lq_table_valid Channel 0 is not an HT channel
Oct 18 20:38:54 creabox kernel: [ 5.692856] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.694412] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.695966] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0910, 92 bytes at 16[16]:9
Oct 18 20:38:54 creabox kernel: [ 5.697643] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.699286] iwlwifi 0000:02:00.0: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
Oct 18 20:38:54 creabox kernel: [ 5.700873] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations .... complete.
Oct 18 20:38:54 creabox kernel: [ 5.702440] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_CT_KILL_CONFIG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.704034] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.705606] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_CT_KILL_CONFIG_CMD (#a4), seq: 0x0911, 16 bytes at 17[17]:9
Oct 18 20:38:54 creabox kernel: [ 5.707224] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.708847] iwlwifi 0000:02:00.0: U iwl_rf_kill_ct_config REPLY_CT_KILL_CONFIG_CMD succeeded, critical temperature enter is 114,exit is 95
Oct 18 20:38:54 creabox kernel: [ 5.710484] iwlwifi 0000:02:00.0: U iwl_alive_start ALIVE processing complete.
Oct 18 20:38:54 creabox kernel: [ 5.712097] iwlwifi 0000:02:00.0: U iwl_power_sleep_cam_cmd Sleep command for CAM
Oct 18 20:38:54 creabox kernel: [ 5.713702] iwlwifi 0000:02:00.0: U iwl_set_power Sending power/sleep command
Oct 18 20:38:54 creabox kernel: [ 5.715282] iwlwifi 0000:02:00.0: U iwl_set_power Flags value = 0x00000008
Oct 18 20:38:54 creabox kernel: [ 5.716855] iwlwifi 0000:02:00.0: U iwl_set_power Tx timeout = 0
Oct 18 20:38:54 creabox kernel: [ 5.718430] iwlwifi 0000:02:00.0: U iwl_set_power Rx timeout = 0
Oct 18 20:38:54 creabox kernel: [ 5.719952] iwlwifi 0000:02:00.0: U iwl_set_power Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
Oct 18 20:38:54 creabox kernel: [ 5.721478] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command POWER_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.723004] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command POWER_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.724554] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0912, 40 bytes at 18[18]:9
Oct 18 20:38:54 creabox kernel: [ 5.726138] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command POWER_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.727695] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.729219] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.730703] iwlwifi 0000:02:00.0: U iwlagn_mac_start Start UP work done.
Oct 18 20:38:54 creabox kernel: [ 5.732186] iwlwifi 0000:02:00.0: U iwlagn_mac_start leave
Oct 18 20:38:54 creabox kernel: [ 5.733639] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_LEDS_CMD (#48), seq: 0x0913, 12 bytes at 19[19]:9
Oct 18 20:38:54 creabox kernel: [ 5.735117] iwlwifi 0000:02:00.0: U iwlagn_mac_add_interface enter: type 2, addr b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 5.736625] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.738119] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd RX CONFIG:
Oct 18 20:38:54 creabox kernel: [ 5.739598] iwl data: 00000000: b4 b6 76 b6 4b 3f 00 00 00 00 00 00 00 00 00 00 ..v.K?..........
Oct 18 20:38:54 creabox kernel: [ 5.741088] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 0f 00 00 ...........$....
Oct 18 20:38:54 creabox kernel: [ 5.742588] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
Oct 18 20:38:54 creabox kernel: [ 5.744117] iwl data: 00000030: 00 00 ..
Oct 18 20:38:54 creabox kernel: [ 5.745655] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 channel: 0x1
Oct 18 20:38:54 creabox kernel: [ 5.747187] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 flags: 0x00008005
Oct 18 20:38:54 creabox kernel: [ 5.748710] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
Oct 18 20:38:54 creabox kernel: [ 5.750241] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 dev_type: 0x3
Oct 18 20:38:54 creabox kernel: [ 5.751761] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
Oct 18 20:38:54 creabox kernel: [ 5.753283] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
Oct 18 20:38:54 creabox kernel: [ 5.754785] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] node_addr: b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 5.756288] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.757778] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
Oct 18 20:38:54 creabox kernel: [ 5.759268] iwlwifi 0000:02:00.0: U iwl_full_rxon_required need full RXON - !iwl_is_associated_ctx(ctx)
Oct 18 20:38:54 creabox kernel: [ 5.760780] iwlwifi 0000:02:00.0: U iwlagn_commit_rxon Going to commit RXON
Oct 18 20:38:54 creabox kernel: [ 5.760780] * without RXON_FILTER_ASSOC_MSK
Oct 18 20:38:54 creabox kernel: [ 5.760780] * channel = 1
Oct 18 20:38:54 creabox kernel: [ 5.760780] * bssid = 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.766686] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.768194] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.769668] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0914, 54 bytes at 20[20]:9
Oct 18 20:38:54 creabox kernel: [ 5.771428] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.772976] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.772989] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations Clearing ucode stations in driver
Oct 18 20:38:54 creabox kernel: [ 5.772991] iwlwifi 0000:02:00.0: I iwl_clear_ucode_stations Clearing ucode active for station 15
Oct 18 20:38:54 creabox kernel: [ 5.772994] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations ... start.
Oct 18 20:38:54 creabox kernel: [ 5.772995] iwlwifi 0000:02:00.0: I iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.772997] iwlwifi 0000:02:00.0: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
Oct 18 20:38:54 creabox kernel: [ 5.772999] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.773000] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.773002] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0915, 96 bytes at 21[21]:9
Oct 18 20:38:54 creabox kernel: [ 5.786416] iwlwifi 0000:02:00.0: U iwl_process_add_sta_resp Processing response for adding station 15
Oct 18 20:38:54 creabox kernel: [ 5.787913] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp REPLY_ADD_STA PASSED
Oct 18 20:38:54 creabox kernel: [ 5.789392] iwlwifi 0000:02:00.0: I iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
Oct 18 20:38:54 creabox kernel: [ 5.790881] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.792363] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.793852] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.795358] iwlwifi 0000:02:00.0: U is_lq_table_valid Channel 1 is not an HT channel
Oct 18 20:38:54 creabox kernel: [ 5.796835] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.798304] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.799771] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0916, 92 bytes at 22[22]:9
Oct 18 20:38:54 creabox kernel: [ 5.801340] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.802886] iwlwifi 0000:02:00.0: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
Oct 18 20:38:54 creabox kernel: [ 5.804387] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations .... complete.
Oct 18 20:38:54 creabox kernel: [ 5.805862] iwlwifi 0000:02:00.0: U iwlagn_mac_add_interface leave
Oct 18 20:38:54 creabox kernel: [ 5.807328] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.808762] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd RX CONFIG:
Oct 18 20:38:54 creabox kernel: [ 5.810197] iwl data: 00000000: b4 b6 76 b6 4b 3f 00 00 00 00 00 00 00 00 00 00 ..v.K?..........
Oct 18 20:38:54 creabox kernel: [ 5.811655] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 0f 00 00 ...........$....
Oct 18 20:38:54 creabox kernel: [ 5.813143] iwl data: 00000020: 05 80 00 00 44 00 00 00 01 00 ff ff ff 00 00 00 ....D...........
Oct 18 20:38:54 creabox kernel: [ 5.814615] iwl data: 00000030: 00 00 ..
Oct 18 20:38:54 creabox kernel: [ 5.816106] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 channel: 0x1
Oct 18 20:38:54 creabox kernel: [ 5.817593] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 flags: 0x00008005
Oct 18 20:38:54 creabox kernel: [ 5.819068] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000044
Oct 18 20:38:54 creabox kernel: [ 5.820560] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 dev_type: 0x3
Oct 18 20:38:54 creabox kernel: [ 5.822016] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
Oct 18 20:38:54 creabox kernel: [ 5.823453] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
Oct 18 20:38:54 creabox kernel: [ 5.824868] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] node_addr: b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 5.826302] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.827731] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
Oct 18 20:38:54 creabox kernel: [ 5.829176] iwlwifi 0000:02:00.0: U iwl_full_rxon_required need full RXON - !iwl_is_associated_ctx(ctx)
Oct 18 20:38:54 creabox kernel: [ 5.830599] iwlwifi 0000:02:00.0: U iwlagn_commit_rxon Going to commit RXON
Oct 18 20:38:54 creabox kernel: [ 5.830599] * without RXON_FILTER_ASSOC_MSK
Oct 18 20:38:54 creabox kernel: [ 5.830599] * channel = 1
Oct 18 20:38:54 creabox kernel: [ 5.830599] * bssid = 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.836136] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.837534] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.838929] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0917, 54 bytes at 23[23]:9
Oct 18 20:38:54 creabox kernel: [ 5.840621] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.842072] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.842085] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations Clearing ucode stations in driver
Oct 18 20:38:54 creabox kernel: [ 5.842087] iwlwifi 0000:02:00.0: I iwl_clear_ucode_stations Clearing ucode active for station 15
Oct 18 20:38:54 creabox kernel: [ 5.842090] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations ... start.
Oct 18 20:38:54 creabox kernel: [ 5.842091] iwlwifi 0000:02:00.0: I iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.842093] iwlwifi 0000:02:00.0: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
Oct 18 20:38:54 creabox kernel: [ 5.842095] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.842096] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.842098] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0918, 96 bytes at 24[24]:9
Oct 18 20:38:54 creabox kernel: [ 5.855110] iwlwifi 0000:02:00.0: U iwl_process_add_sta_resp Processing response for adding station 15
Oct 18 20:38:54 creabox kernel: [ 5.856583] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp REPLY_ADD_STA PASSED
Oct 18 20:38:54 creabox kernel: [ 5.858048] iwlwifi 0000:02:00.0: I iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
Oct 18 20:38:54 creabox kernel: [ 5.859540] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.861035] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.862524] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.864055] iwlwifi 0000:02:00.0: U is_lq_table_valid Channel 1 is not an HT channel
Oct 18 20:38:54 creabox kernel: [ 5.865562] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.867068] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.868554] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0919, 92 bytes at 25[25]:9
Oct 18 20:38:54 creabox kernel: [ 5.870153] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.871744] iwlwifi 0000:02:00.0: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
Oct 18 20:38:54 creabox kernel: [ 5.873286] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations .... complete.
Oct 18 20:38:54 creabox kernel: [ 5.874850] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.876400] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.877918] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.879425] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.880933] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.882385] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.883823] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.885238] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.886634] iwlwifi 0000:02:00.0: U iwlagn_update_qos send QoS cmd with Qos active=0 FLAGS=0x0
Oct 18 20:38:54 creabox kernel: [ 5.888052] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_QOS_PARAM
Oct 18 20:38:54 creabox kernel: [ 5.889466] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_QOS_PARAM
Oct 18 20:38:54 creabox kernel: [ 5.890870] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_QOS_PARAM (#13), seq: 0x091A, 40 bytes at 26[26]:9
Oct 18 20:38:54 creabox kernel: [ 5.892327] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_QOS_PARAM
Oct 18 20:38:54 creabox kernel: [ 5.893783] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.895211] iwlwifi 0000:02:00.0: U iwlagn_mac_config enter: changed 0xffffffff
Oct 18 20:38:54 creabox kernel: [ 5.896598] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.897977] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.899365] iwlwifi 0000:02:00.0: U iwl_power_sleep_cam_cmd Sleep command for CAM
Oct 18 20:38:54 creabox kernel: [ 5.900711] iwlwifi 0000:02:00.0: U iwlagn_mac_config TX Power old=0 new=15
Oct 18 20:38:54 creabox kernel: [ 5.902051] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_POWER_DBM_CMD
Oct 18 20:38:54 creabox kernel: [ 5.903457] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_POWER_DBM_CMD
Oct 18 20:38:54 creabox kernel: [ 5.904798] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x091B, 8 bytes at 27[27]:9
Oct 18 20:38:54 creabox kernel: [ 5.906572] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_POWER_DBM_CMD
Oct 18 20:38:54 creabox kernel: [ 5.908027] iwlwifi 0000:02:00.0: U iwlagn_mac_config leave
Oct 18 20:38:54 creabox kernel: [ 5.909432] iwlwifi 0000:02:00.0: U iwlagn_configure_filter Enter: changed: 0x0, total: 0x80000000
Oct 18 20:38:54 creabox kernel: [ 5.911058] iwlwifi 0000:02:00.0: U iwlagn_configure_filter Enter: changed: 0x0, total: 0x80000000
Oct 18 20:38:54 creabox kernel: [ 5.926627] device eth0 entered promiscuous mode
Oct 18 20:38:54 creabox kernel: [ 6.057953] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 6.163035] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 7.676129] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 18 20:38:54 creabox kernel: [ 7.679122] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
Oct 18 20:38:54 creabox kernel: [ 7.681910] xen_bridge: port 1(eth0) entered forwarding state
Oct 18 20:38:54 creabox kernel: [ 7.684662] xen_bridge: port 1(eth0) entered forwarding state
Oct 18 20:38:54 creabox acpid: starting up with netlink and the input layer
Oct 18 20:38:54 creabox acpid: 1 rule loaded
Oct 18 20:38:54 creabox acpid: waiting for events: event logging is off
Oct 18 20:38:54 creabox /usr/sbin/cron[2897]: (CRON) INFO (pidfile fd = 3)
Oct 18 20:38:54 creabox /usr/sbin/cron[2912]: (CRON) STARTUP (fork ok)
Oct 18 20:38:54 creabox /usr/sbin/cron[2912]: (CRON) INFO (Running @reboot jobs)
Oct 18 20:39:52 creabox kernel: [ 65.980221] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091C, 8 bytes at 28[28]:9
Oct 18 20:39:52 creabox kernel: [ 65.980486] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:39:52 creabox kernel: [ 65.980649] iwlwifi 0000:02:00.0: U iwl_advance_tt_handler Temperature increase 10 degree Celsius
Oct 18 20:40:52 creabox kernel: [ 126.109405] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091D, 8 bytes at 29[29]:9
Oct 18 20:41:53 creabox kernel: [ 186.238563] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091E, 8 bytes at 30[30]:9
Oct 18 20:42:53 creabox kernel: [ 246.367716] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091F, 8 bytes at 31[31]:9
Oct 18 20:42:53 creabox kernel: [ 246.367968] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:43:53 creabox kernel: [ 306.496878] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0920, 8 bytes at 32[0]:9
Oct 18 20:43:53 creabox kernel: [ 306.497128] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:44:53 creabox kernel: [ 366.626055] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0921, 8 bytes at 33[1]:9
Oct 18 20:44:53 creabox kernel: [ 366.626321] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:45:53 creabox kernel: [ 426.755213] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0922, 8 bytes at 34[2]:9
Oct 18 20:45:53 creabox kernel: [ 426.755494] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:46:53 creabox kernel: [ 486.884369] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0923, 8 bytes at 35[3]:9
Oct 18 20:46:53 creabox kernel: [ 486.886313] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:47:54 creabox kernel: [ 547.013528] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0924, 8 bytes at 36[4]:9
Oct 18 20:48:54 creabox kernel: [ 607.142678] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0925, 8 bytes at 37[5]:9
Oct 18 20:49:54 creabox kernel: [ 667.271836] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0926, 8 bytes at 38[6]:9
Oct 18 20:50:54 creabox kernel: [ 727.400996] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0927, 8 bytes at 39[7]:9
Oct 18 20:51:54 creabox kernel: [ 787.530149] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0928, 8 bytes at 40[8]:9
Oct 18 20:52:54 creabox kernel: [ 847.659322] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0929, 8 bytes at 41[9]:9
Oct 18 20:53:54 creabox kernel: [ 907.788475] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092A, 8 bytes at 42[10]:9
Oct 18 20:54:55 creabox kernel: [ 967.917629] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092B, 8 bytes at 43[11]:9
Oct 18 20:54:55 creabox kernel: [ 967.917907] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:55:55 creabox kernel: [ 1028.046789] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092C, 8 bytes at 44[12]:9
Oct 18 20:56:55 creabox kernel: [ 1088.175949] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092D, 8 bytes at 45[13]:9
Oct 18 20:56:55 creabox kernel: [ 1088.176204] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:57:55 creabox kernel: [ 1148.305122] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092E, 8 bytes at 46[14]:9
Oct 18 20:57:55 creabox kernel: [ 1148.305414] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:58:55 creabox kernel: [ 1208.434265] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092F, 8 bytes at 47[15]:9
Oct 18 20:58:55 creabox kernel: [ 1208.434517] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:59:55 creabox kernel: [ 1268.563419] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0930, 8 bytes at 48[16]:9
Oct 18 21:00:56 creabox kernel: [ 1328.692582] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0931, 8 bytes at 49[17]:9
Oct 18 21:00:56 creabox kernel: [ 1328.692834] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:01:56 creabox kernel: [ 1388.821742] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0932, 8 bytes at 50[18]:9
Oct 18 21:01:56 creabox kernel: [ 1388.822019] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:02:56 creabox kernel: [ 1448.950898] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0933, 8 bytes at 51[19]:9
Oct 18 21:03:56 creabox kernel: [ 1509.080067] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0934, 8 bytes at 52[20]:9
Oct 18 21:04:56 creabox kernel: [ 1569.209217] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0935, 8 bytes at 53[21]:9
Oct 18 21:05:56 creabox kernel: [ 1629.338378] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0936, 8 bytes at 54[22]:9
Oct 18 21:06:57 creabox kernel: [ 1689.467536] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0937, 8 bytes at 55[23]:9
Oct 18 21:07:57 creabox kernel: [ 1749.596707] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0938, 8 bytes at 56[24]:9
Oct 18 21:08:57 creabox kernel: [ 1809.725852] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0939, 8 bytes at 57[25]:9
Oct 18 21:08:57 creabox kernel: [ 1809.726106] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:09:57 creabox kernel: [ 1869.855014] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093A, 8 bytes at 58[26]:9
Oct 18 21:10:57 creabox kernel: [ 1929.984169] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093B, 8 bytes at 59[27]:9
Oct 18 21:11:57 creabox kernel: [ 1990.113331] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093C, 8 bytes at 60[28]:9
Oct 18 21:12:58 creabox kernel: [ 2050.242462] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093D, 8 bytes at 61[29]:9
Oct 18 21:13:58 creabox kernel: [ 2110.371646] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093E, 8 bytes at 62[30]:9
Oct 18 21:14:58 creabox kernel: [ 2170.500780] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093F, 8 bytes at 63[31]:9
Oct 18 21:15:58 creabox kernel: [ 2230.629964] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0940, 8 bytes at 64[0]:9
Oct 18 21:16:58 creabox kernel: [ 2290.759123] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0941, 8 bytes at 65[1]:9
Oct 18 21:17:01 creabox /USR/SBIN/CRON[3388]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 18 21:17:58 creabox kernel: [ 2350.888289] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0942, 8 bytes at 66[2]:9
Oct 18 21:18:58 creabox kernel: [ 2411.017442] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0943, 8 bytes at 67[3]:9
Oct 18 21:19:59 creabox kernel: [ 2471.146603] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0944, 8 bytes at 68[4]:9
Oct 18 21:20:59 creabox kernel: [ 2531.275758] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0945, 8 bytes at 69[5]:9
Oct 18 21:21:59 creabox kernel: [ 2591.404922] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0946, 8 bytes at 70[6]:9
Oct 18 21:22:59 creabox kernel: [ 2651.534078] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0947, 8 bytes at 71[7]:9
Oct 18 21:23:59 creabox kernel: [ 2711.663231] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0948, 8 bytes at 72[8]:9
Oct 18 21:23:59 creabox kernel: [ 2711.663474] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:24:59 creabox kernel: [ 2771.792396] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0949, 8 bytes at 73[9]:9
Oct 18 21:24:59 creabox kernel: [ 2771.792637] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:26:00 creabox kernel: [ 2831.921569] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094A, 8 bytes at 74[10]:9
Oct 18 21:26:09 creabox kernel: [ 2840.946472] cfg80211: Pending regulatory request, waiting for it to be processed...
Oct 18 21:27:00 creabox kernel: [ 2892.050714] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094B, 8 bytes at 75[11]:9
Oct 18 21:28:00 creabox kernel: [ 2952.179870] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094C, 8 bytes at 76[12]:9
Oct 18 21:29:00 creabox kernel: [ 3012.309029] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094D, 8 bytes at 77[13]:9
Oct 18 21:30:00 creabox kernel: [ 3072.438189] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094E, 8 bytes at 78[14]:9
Oct 18 21:31:00 creabox kernel: [ 3132.567348] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094F, 8 bytes at 79[15]:9
Oct 18 21:32:01 creabox kernel: [ 3192.696505] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0950, 8 bytes at 80[16]:9
Oct 18 21:33:01 creabox kernel: [ 3252.825666] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0951, 8 bytes at 81[17]:9
Oct 18 21:34:01 creabox kernel: [ 3312.954824] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0952, 8 bytes at 82[18]:9
Oct 18 21:35:01 creabox kernel: [ 3373.083990] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0953, 8 bytes at 83[19]:9
Oct 18 21:36:01 creabox kernel: [ 3433.213140] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0954, 8 bytes at 84[20]:9
Oct 18 21:37:01 creabox kernel: [ 3493.342299] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0955, 8 bytes at 85[21]:9
^ permalink raw reply related
* Re: pull request (net-next): ipsec-next 2013-10-18
From: David Miller @ 2013-10-18 17:52 UTC (permalink / raw)
To: steffen.klassert; +Cc: herbert, netdev
In-Reply-To: <1382085730-3415-1-git-send-email-steffen.klassert@secunet.com>
From: Steffen Klassert <steffen.klassert@secunet.com>
Date: Fri, 18 Oct 2013 10:42:06 +0200
> 1) Don't use a wildcard SA if a more precise one is in acquire state,
> from Fan Du.
>
> 2) Simplify the SA lookup when using wildcard source. We need to check
> only the destination in this case, from Fan Du.
>
> 3) Add a receive path hook for IPsec virtual tunnel interfaces
> to xfrm6_mode_tunnel.
>
> 4) Add support for IPsec virtual tunnel interfaces to ipv6.
>
> Please pull or let me know if there are problems.
Pulled, thanks Steffen.
^ permalink raw reply
* Re: [PATCH v2 net-next] fib_trie: remove duplicated rcu lock
From: David Miller @ 2013-10-18 17:54 UTC (permalink / raw)
To: baker.kernel
Cc: eric.dumazet, kuznet, jmorris, yoshfuji, kaber, netdev,
linux-kernel
In-Reply-To: <1381665009-4436-1-git-send-email-baker.kernel@gmail.com>
From: baker.kernel@gmail.com
Date: Sun, 13 Oct 2013 19:50:09 +0800
> From: "baker.zhang" <baker.kernel@gmail.com>
>
> fib_table_lookup has included the rcu lock protection.
>
> Signed-off-by: baker.zhang <baker.kernel@gmail.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH net-next 0/2] Removal of struct esp_data
From: David Miller @ 2013-10-18 17:55 UTC (permalink / raw)
To: mathias.krause; +Cc: netdev, steffen.klassert, herbert
In-Reply-To: <1382090945-20860-1-git-send-email-mathias.krause@secunet.com>
From: Mathias Krause <mathias.krause@secunet.com>
Date: Fri, 18 Oct 2013 12:09:03 +0200
> This series removes one level of indirection when accessing the aead
> crypto algorithm in ESP transforms by simply removing struct esp_data.
> This results in smaller code and less memory usage per xfrm state.
>
> Please apply!
No objections from me, I'll let Steffen pick this up.
^ permalink raw reply
* Re: [patch] ax25: cleanup a range test
From: David Miller @ 2013-10-18 17:56 UTC (permalink / raw)
To: dan.carpenter; +Cc: jreuter, ralf, linux-hams, netdev, kernel-janitors
In-Reply-To: <20131018090656.GA23528@longonot.mountain>
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 18 Oct 2013 12:06:56 +0300
> The current test works fine in practice. The "amount" variable is
> actually used as a boolean so negative values or any non-zero values
> count as "true". However since we don't allow numbers greater than one,
> let's not allow negative numbers either.
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Applied to net-next, thanks Dan.
^ permalink raw reply
* Re: [PATCH] packet: Deliver VLAN TPID to userspace
From: Stephen Hemminger @ 2013-10-18 17:56 UTC (permalink / raw)
To: Atzm Watanabe; +Cc: netdev
In-Reply-To: <87a9i6jymc.wl%atzm@stratosphere.co.jp>
On Sat, 19 Oct 2013 02:08:11 +0900
Atzm Watanabe <atzm@stratosphere.co.jp> wrote:
> diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h
> index dbf0666..6e36e0a 100644
> --- a/include/uapi/linux/if_packet.h
> +++ b/include/uapi/linux/if_packet.h
> @@ -83,7 +83,7 @@ struct tpacket_auxdata {
> __u16 tp_mac;
> __u16 tp_net;
> __u16 tp_vlan_tci;
> - __u16 tp_padding;
> + __u16 tp_vlan_tpid;
> };
>
> /* Rx ring - header status */
> @@ -132,12 +132,13 @@ struct tpacket2_hdr {
> __u32 tp_sec;
> __u32 tp_nsec;
> __u16 tp_vlan_tci;
> - __u16 tp_padding;
> + __u16 tp_vlan_tpid;
> };
>
> struct tpacket_hdr_variant1 {
> __u32 tp_rxhash;
> __u32 tp_vlan_tci;
> + __u32 tp_vlan_tpid;
> };
The last change will break ABI to userspace applications.
You can reuse padding elements; but you can't increase (or shrink)
an existing structure.
^ permalink raw reply
* Re: [PATCH net-next] fib: Use const struct nl_info * in rtmsg_fib
From: David Miller @ 2013-10-18 18:42 UTC (permalink / raw)
To: joe; +Cc: kristian.evensen, netdev
In-Reply-To: <1382042051.22110.146.camel@joe-AO722>
From: Joe Perches <joe@perches.com>
Date: Thu, 17 Oct 2013 13:34:11 -0700
> The rtmsg_fib function doesn't modify this argument so mark
> it const.
>
> Signed-off-by: Joe Perches <joe@perches.com>
Applied, thanks Joe.
^ permalink raw reply
* Re: [patch net REPOST 2/3] ip6_output: do skb ufo init for peeked non ufo skb as well
From: Sergei Shtylyov @ 2013-10-18 18:44 UTC (permalink / raw)
To: Jiri Pirko, netdev
Cc: davem, eric.dumazet, hannes, jdmason, yoshfuji, kuznet, jmorris,
kaber, herbert
In-Reply-To: <1382116431-28758-3-git-send-email-jiri@resnulli.us>
Hello.
On 10/18/2013 09:13 PM, Jiri Pirko wrote:
> Now, if user application does:
> sendto len<mtu flag MSG_MORE
> sendto len>mtu flag 0
> The skb is not treated as fragmented one because it is not initialized
> that way. So move the initialization to fix this.
> introduced by:
> commit e89e9cf539a28df7d0eb1d0a545368e9920b34ac "[IPv4/IPv6]: UFO Scatter-gather approach"
> Signed-off-by: Jiri Pirko <jiri@resnulli.us>
> ---
> net/ipv6/ip6_output.c | 26 ++++++++++++++------------
> 1 file changed, 14 insertions(+), 12 deletions(-)
> diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
> index a54c45c..c6cfa2f 100644
> --- a/net/ipv6/ip6_output.c
> +++ b/net/ipv6/ip6_output.c
[...]
> @@ -1036,20 +1035,23 @@ static inline int ip6_ufo_append_data(struct sock *sk,
> skb->transport_header = skb->network_header + fragheaderlen;
>
> skb->protocol = htons(ETH_P_IPV6);
> - skb->ip_summed = CHECKSUM_PARTIAL;
> skb->csum = 0;
>
> - /* Specify the length of each IPv6 datagram fragment.
> - * It has to be a multiple of 8.
> - */
> - skb_shinfo(skb)->gso_size = (mtu - fragheaderlen -
> - sizeof(struct frag_hdr)) & ~7;
> - skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
> - ipv6_select_ident(&fhdr, rt);
> - skb_shinfo(skb)->ip6_frag_id = fhdr.identification;
> __skb_queue_tail(&sk->sk_write_queue, skb);
> - }
> + } else if (skb_is_gso(skb))
> + goto append;
According to Documentation/CodingStyle, there should be {} in both arms of
*if* statement if there's {} in one of them.
WBR, Sergei
^ permalink raw reply
* Re: [patch net REPOST 3/3] ip_output: do skb ufo init for peeked non ufo skb as well
From: Sergei Shtylyov @ 2013-10-18 18:45 UTC (permalink / raw)
To: Jiri Pirko, netdev
Cc: davem, eric.dumazet, hannes, jdmason, yoshfuji, kuznet, jmorris,
kaber, herbert
In-Reply-To: <1382116431-28758-4-git-send-email-jiri@resnulli.us>
On 10/18/2013 09:13 PM, Jiri Pirko wrote:
> Now, if user application does:
> sendto len<mtu flag MSG_MORE
> sendto len>mtu flag 0
> The skb is not treated as fragmented one because it is not initialized
> that way. So move the initialization to fix this.
> introduced by:
> commit e89e9cf539a28df7d0eb1d0a545368e9920b34ac "[IPv4/IPv6]: UFO Scatter-gather approach"
> Signed-off-by: Jiri Pirko <jiri@resnulli.us>
> ---
> net/ipv4/ip_output.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
> diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
> index a04d872..bd21c5d 100644
> --- a/net/ipv4/ip_output.c
> +++ b/net/ipv4/ip_output.c
> @@ -772,15 +772,19 @@ static inline int ip_ufo_append_data(struct sock *sk,
> /* initialize protocol header pointer */
> skb->transport_header = skb->network_header + fragheaderlen;
>
> - skb->ip_summed = CHECKSUM_PARTIAL;
> skb->csum = 0;
>
> - /* specify the length of each IP datagram fragment */
> - skb_shinfo(skb)->gso_size = maxfraglen - fragheaderlen;
> - skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
> +
> __skb_queue_tail(queue, skb);
> - }
> + } else if (skb_is_gso(skb))
> + goto append;
Same comment on the necessity of {} here.
WBR, Sergei
^ permalink raw reply
* Re: [PATCH][net-next] gianfar: Simplify MQ polling to avoid soft lockup
From: David Miller @ 2013-10-18 19:55 UTC (permalink / raw)
To: claudiu.manoil; +Cc: netdev
In-Reply-To: <1381759509-26882-1-git-send-email-claudiu.manoil@freescale.com>
From: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Mon, 14 Oct 2013 17:05:09 +0300
> Under certain low traffic conditions, the single core
> devices with multiple Rx/Tx queues (MQ mode) may reach
> soft lockup due to gfar_poll not returning in proper time.
> The following exception was obtained using iperf on a 100Mbit
> half-duplex link, for a p1010 single core device:
...
> To prevent this, the outer while() loop has been removed
> allowing gfar_poll() to return faster even if there's
> still budget left. Also, there's no need to recompute
> the budget per Rx queue anymore.
>
> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH net-next] {selinux, af_key} Rework pfkey_sadb2xfrm_user_sec_ctx
From: David Miller @ 2013-10-18 19:58 UTC (permalink / raw)
To: fan.du; +Cc: steffen.klassert, netdev
In-Reply-To: <1381904114-29556-1-git-send-email-fan.du@windriver.com>
From: Fan Du <fan.du@windriver.com>
Date: Wed, 16 Oct 2013 14:15:14 +0800
> Taking advantages of sadb_x_sec_ctx and xfrm_user_sec_ctx share the same
> structure arrangement, rework pfkey_sadb2xfrm_user_sec_ctx by casting
> sadb_x_sec_ctx into xfrm_user_sec_ctx with minor len fix.
>
> Then we can:
> -Avoid kmalloc/free memory for xfrm_user_sec_ctx, sadb_x_sec_ctx would be fine.
> -Fix missing return value check bug for pfkey_compile_policy when kmalloc fails
>
> Signed-off-by: Fan Du <fan.du@windriver.com>
This isn't safe, one structure is packed and the other is not.
Furthermore, unless there is some enormous gain (in this case there
is not) losing the type checking by casting two data structures like
this is undesirable.
^ permalink raw reply
* Re: [PATCH v2 net 0/4] bridge: Fix problems around the PVID
From: David Miller @ 2013-10-18 20:03 UTC (permalink / raw)
To: makita.toshiaki; +Cc: vyasevic, netdev, toshiaki.makita1
In-Reply-To: <1381910836-718-1-git-send-email-makita.toshiaki@lab.ntt.co.jp>
From: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Date: Wed, 16 Oct 2013 17:07:12 +0900
> There seem to be some undesirable behaviors related with PVID.
> 1. It has no effect assigning PVID to a port. PVID cannot be applied
> to any frame regardless of whether we set it or not.
> 2. FDB entries learned via frames applied PVID are registered with
> VID 0 rather than VID value of PVID.
> 3. We can set 0 or 4095 as a PVID that are not allowed in IEEE 802.1Q.
> This leads interoperational problems such as sending frames with VID
> 4095, which is not allowed in IEEE 802.1Q, and treating frames with VID
> 0 as they belong to VLAN 0, which is expected to be handled as they have
> no VID according to IEEE 802.1Q.
...
> Patch set follows this mail.
> The order of patches is not the same as described above, because the way
> to fix 1st problem is based on the assumption that we don't use VID 0 as
> a PVID, which is realized by fixing 3rd problem.
> (1/4)(2/4): Fix 3rd problem.
> (3/4): Fix 1st problem.
> (4/4): Fix 2nd probelm.
>
> v2:
> - Add descriptions about the problem related to priority-tags in cover letter.
> - Revise patch comments to reference the newest spec.
Series applied, thank you.
^ permalink raw reply
* [PATCH net-next] ipv4: gso: send_check() & segment() cleanups
From: Eric Dumazet @ 2013-10-18 20:13 UTC (permalink / raw)
To: David Miller; +Cc: netdev
From: Eric Dumazet <edumazet@google.com>
inet_gso_segment() and inet_gso_send_check() are called by
skb_mac_gso_segment() under rcu lock, no need to use
rcu_read_lock() / rcu_read_unlock()
Avoid calling ip_hdr() twice per function.
We can use ip_send_check() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
---
net/ipv4/af_inet.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 35913fb..4f8cd4f 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1254,20 +1254,19 @@ static int inet_gso_send_check(struct sk_buff *skb)
if (ihl < sizeof(*iph))
goto out;
+ proto = iph->protocol;
+
+ /* Warning: after this point, iph might be no longer valid */
if (unlikely(!pskb_may_pull(skb, ihl)))
goto out;
-
__skb_pull(skb, ihl);
+
skb_reset_transport_header(skb);
- iph = ip_hdr(skb);
- proto = iph->protocol;
err = -EPROTONOSUPPORT;
- rcu_read_lock();
ops = rcu_dereference(inet_offloads[proto]);
if (likely(ops && ops->callbacks.gso_send_check))
err = ops->callbacks.gso_send_check(skb);
- rcu_read_unlock();
out:
return err;
@@ -1305,23 +1304,23 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb,
if (ihl < sizeof(*iph))
goto out;
+ id = ntohs(iph->id);
+ proto = iph->protocol;
+
+ /* Warning: after this point, iph might be no longer valid */
if (unlikely(!pskb_may_pull(skb, ihl)))
goto out;
+ __skb_pull(skb, ihl);
tunnel = !!skb->encapsulation;
- __skb_pull(skb, ihl);
skb_reset_transport_header(skb);
- iph = ip_hdr(skb);
- id = ntohs(iph->id);
- proto = iph->protocol;
+
segs = ERR_PTR(-EPROTONOSUPPORT);
- rcu_read_lock();
ops = rcu_dereference(inet_offloads[proto]);
if (likely(ops && ops->callbacks.gso_segment))
segs = ops->callbacks.gso_segment(skb, features);
- rcu_read_unlock();
if (IS_ERR_OR_NULL(segs))
goto out;
@@ -1339,8 +1338,7 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb,
iph->id = htons(id++);
}
iph->tot_len = htons(skb->len - skb->mac_len);
- iph->check = 0;
- iph->check = ip_fast_csum(skb_network_header(skb), iph->ihl);
+ ip_send_check(iph);
} while ((skb = skb->next));
out:
^ permalink raw reply related
* Re: [PATCH RFC] xfrm: Don't queue retransmitted packets if the original is still on the host
From: David Miller @ 2013-10-18 20:19 UTC (permalink / raw)
To: steffen.klassert; +Cc: eric.dumazet, netdev
In-Reply-To: <20131016114246.GB7660@secunet.com>
From: Steffen Klassert <steffen.klassert@secunet.com>
Date: Wed, 16 Oct 2013 13:42:47 +0200
> It does not make sense to queue retransmitted packets if the
> original packet is still in some queue of this host. So add
> a check to xdst_queue_output() and drop the packet if the
> original packet is not yet sent.
>
> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
I have no problems with this, what about you Eric?
^ permalink raw reply
* Re: [PATCH net-next] tcp: remove redundant code in __tcp_retransmit_skb()
From: David Miller @ 2013-10-18 20:22 UTC (permalink / raw)
To: ncardwell; +Cc: netdev, edumazet, ycheng
In-Reply-To: <1381941411-30645-1-git-send-email-ncardwell@google.com>
From: Neal Cardwell <ncardwell@google.com>
Date: Wed, 16 Oct 2013 12:36:51 -0400
> Remove the specialized code in __tcp_retransmit_skb() that tries to trim
> any ACKed payload preceding a FIN before we retransmit (this was added
> in 1999 in v2.2.3pre3). This trimming code was made unreachable by the
> more general code added above it that uses tcp_trim_head() to trim any
> ACKed payload, with or without a FIN (this was added in "[NET]: Add
> segmentation offload support to TCP." in 2002 circa v2.5.33).
>
> Signed-off-by: Neal Cardwell <ncardwell@google.com>
Applied, thanks Neal.
^ permalink raw reply
* Re: [PATCH net-next] em_ipset: use dev_net() accessor
From: David Miller @ 2013-10-18 20:23 UTC (permalink / raw)
To: stephen
Cc: rdunlap, lve, thierry.reding, linux-next, linux-kernel, broonie,
netdev, jhs
In-Reply-To: <20131016172934.7913a297@nehalam.linuxnetplumber.net>
From: Stephen Hemminger <stephen@networkplumber.org>
Date: Wed, 16 Oct 2013 17:29:34 -0700
> Randy found that if network namespace not enabled then
> nd_net does not exist and would cause compilation failure.
>
> This is handled correctly by using the dev_net() macro.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> Acked-by: Randy Dunlap <rdunlap@infradead.org>
Applied, thanks everyone.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox