* Re: [PATCH v7] ethernet: arc: Add support for Rockchip SoC layer device tree bindings
From: Beniamino Galvani @ 2014-09-09 11:05 UTC (permalink / raw)
To: Romain Perier
Cc: heiko, linux-rockchip, linux-arm-kernel, netdev, devicetree, arnd
In-Reply-To: <1410257727-22497-1-git-send-email-romain.perier@gmail.com>
On Tue, Sep 09, 2014 at 10:15:27AM +0000, Romain Perier wrote:
> This patch defines a platform glue layer for Rockchip SoCs which
> support arc-emac driver. It ensures that regulator for the rmii is on
> before trying to connect to the ethernet controller. It applies right
> speed and mode changes to the grf when ethernet settings change.
>
> Signed-off-by: Romain Perier <romain.perier@gmail.com>
> ---
> drivers/net/ethernet/arc/Kconfig | 10 ++
> drivers/net/ethernet/arc/Makefile | 1 +
> drivers/net/ethernet/arc/emac.h | 4 +-
> drivers/net/ethernet/arc/emac_main.c | 2 +
> drivers/net/ethernet/arc/emac_rockchip.c | 229 +++++++++++++++++++++++++++++++
> 5 files changed, 245 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/ethernet/arc/emac_rockchip.c
Tested-by: Beniamino Galvani <b.galvani@gmail.com>
^ permalink raw reply
* [PATCH net-next] ipv6: mcast: remove dead debugging defines
From: Daniel Borkmann @ 2014-09-09 11:07 UTC (permalink / raw)
To: davem; +Cc: hannes, netdev
It's not used anywhere, so just remove these.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
---
net/ipv6/mcast.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 6833dd0..484a942 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -64,15 +64,6 @@
#include <net/ip6_checksum.h>
-/* Set to 3 to get tracing... */
-#define MCAST_DEBUG 2
-
-#if MCAST_DEBUG >= 3
-#define MDBG(x) printk x
-#else
-#define MDBG(x)
-#endif
-
/* Ensure that we have struct in6_addr aligned on 32bit word. */
static void *__mld2_query_bugs[] __attribute__((__unused__)) = {
BUILD_BUG_ON_NULL(offsetof(struct mld2_query, mld2q_srcs) % 4),
--
1.7.11.7
^ permalink raw reply related
* Re: [PATCH v2 0/3] net: Add Keystone NetCP ethernet driver support
From: Jamal Hadi Salim @ 2014-09-09 11:44 UTC (permalink / raw)
To: Santosh Shilimkar, David Miller
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
grant.likely-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA, sandeep_n-l0cyMroinI0,
Benjamin LaHaise, shrijeet Mukherjee
In-Reply-To: <540DC00F.1080103-l0cyMroinI0@public.gmane.org>
On 09/08/14 10:41, Santosh Shilimkar wrote:
>> The NetCP plugin module infrastructure use all the standard kernel
>> infrastructure and its very tiny.
So i found this manual here:
http://www.silica.com/fileadmin/02_Products/Productdetails/Texas_Instruments/SILICA_TI_66AK2E05-ds.pdf
Glad there is an open document!
There are a couple of ethernet switch chips I can spot there.
Can i control those with "bridge" or say "brctl" utilities?
I can see the bridge ports are exposed and i should be able to
control them via ifconfig or ip link. Thats what "standard
kernel infrastructure" means. Magic hidden in a driver is
not.
Take a look at recent netconf discussion (as well as earlier
referenced discussions):
http://vger.kernel.org/netconf-nf-offload.pdf
Maybe we can help providing you some direction?
The problem is it doesnt seem that the offload specs for
those other pieces are open? e.g how do i add an entry
to the L2 switch?
cheers,
jamal
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [net-next PATCH v3 01/15] net: qdisc: use rcu prefix and silence sparse warnings
From: Eric Dumazet @ 2014-09-09 12:05 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055406.2071.44732.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:54 -0700, John Fastabend wrote:
> Add __rcu notation to qdisc handling by doing this we can make
> smatch output more legible. And anyways some of the cases should
> be using rcu_dereference() see qdisc_all_tx_empty(),
> qdisc_tx_chainging(), and so on.
>
> Also *wake_queue() API is commonly called from driver timer routines
> without rcu lock or rtnl lock. So I added rcu_read_lock() blocks
> around netif_wake_subqueue and netif_tx_wake_queue.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
> include/linux/netdevice.h | 29 ++++----------------------
> include/net/sch_generic.h | 29 ++++++++++++++++++++------
> net/core/dev.c | 51 +++++++++++++++++++++++++++++++++++++++++++--
> net/sched/sch_generic.c | 4 ++--
> net/sched/sch_mqprio.c | 6 ++++-
> net/sched/sch_teql.c | 13 +++++++----
> 6 files changed, 90 insertions(+), 42 deletions(-)
>
> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
> index ba72f6b..ae721f5 100644
> --- a/include/linux/netdevice.h
> +++ b/include/linux/netdevice.h
> @@ -543,7 +543,7 @@ struct netdev_queue {
> * read mostly part
> */
> struct net_device *dev;
> - struct Qdisc *qdisc;
> + struct Qdisc __rcu *qdisc;
> struct Qdisc *qdisc_sleeping;
> #ifdef CONFIG_SYSFS
> struct kobject kobj;
> @@ -2356,12 +2356,7 @@ static inline void input_queue_tail_incr_save(struct softnet_data *sd,
> DECLARE_PER_CPU_ALIGNED(struct softnet_data, softnet_data);
>
> void __netif_schedule(struct Qdisc *q);
> -
> -static inline void netif_schedule_queue(struct netdev_queue *txq)
> -{
> - if (!(txq->state & QUEUE_STATE_ANY_XOFF))
> - __netif_schedule(txq->qdisc);
> -}
> +void netif_schedule_queue(struct netdev_queue *txq);
>
> static inline void netif_tx_schedule_all(struct net_device *dev)
> {
> @@ -2397,11 +2392,7 @@ static inline void netif_tx_start_all_queues(struct net_device *dev)
> }
> }
>
> -static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
> -{
> - if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state))
> - __netif_schedule(dev_queue->qdisc);
> -}
> +void netif_tx_wake_queue(struct netdev_queue *dev_queue);
>
> /**
> * netif_wake_queue - restart transmit
> @@ -2673,19 +2664,7 @@ static inline bool netif_subqueue_stopped(const struct net_device *dev,
> return __netif_subqueue_stopped(dev, skb_get_queue_mapping(skb));
> }
>
> -/**
> - * netif_wake_subqueue - allow sending packets on subqueue
> - * @dev: network device
> - * @queue_index: sub queue index
> - *
> - * Resume individual transmit queue of a device with multiple transmit queues.
> - */
> -static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
> -{
> - struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
> - if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state))
> - __netif_schedule(txq->qdisc);
> -}
> +void netif_wake_subqueue(struct net_device *dev, u16 queue_index);
>
> #ifdef CONFIG_XPS
> int netif_set_xps_queue(struct net_device *dev, const struct cpumask *mask,
> diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
> index a3cfb8e..19b1b36 100644
> --- a/include/net/sch_generic.h
> +++ b/include/net/sch_generic.h
> @@ -259,7 +259,9 @@ static inline spinlock_t *qdisc_lock(struct Qdisc *qdisc)
>
> static inline struct Qdisc *qdisc_root(const struct Qdisc *qdisc)
> {
> - return qdisc->dev_queue->qdisc;
> + struct Qdisc *q = rcu_dereference_rtnl(qdisc->dev_queue->qdisc);
> +
> + return q;
> }
>
> static inline struct Qdisc *qdisc_root_sleeping(const struct Qdisc *qdisc)
> @@ -384,7 +386,7 @@ static inline void qdisc_reset_all_tx_gt(struct net_device *dev, unsigned int i)
> struct Qdisc *qdisc;
>
> for (; i < dev->num_tx_queues; i++) {
> - qdisc = netdev_get_tx_queue(dev, i)->qdisc;
> + qdisc = rtnl_dereference(netdev_get_tx_queue(dev, i)->qdisc);
> if (qdisc) {
> spin_lock_bh(qdisc_lock(qdisc));
> qdisc_reset(qdisc);
> @@ -402,13 +404,18 @@ static inline void qdisc_reset_all_tx(struct net_device *dev)
> static inline bool qdisc_all_tx_empty(const struct net_device *dev)
> {
> unsigned int i;
> +
> + rcu_read_lock();
> for (i = 0; i < dev->num_tx_queues; i++) {
> struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
> - const struct Qdisc *q = txq->qdisc;
> + const struct Qdisc *q = rcu_dereference(txq->qdisc);
>
> - if (q->q.qlen)
> + if (q->q.qlen) {
> + rcu_read_unlock();
> return false;
> + }
> }
> + rcu_read_unlock();
> return true;
> }
>
> @@ -416,11 +423,16 @@ static inline bool qdisc_all_tx_empty(const struct net_device *dev)
> static inline bool qdisc_tx_changing(const struct net_device *dev)
> {
> unsigned int i;
> +
> + rcu_read_lock();...
No need for rcu_read_lock() : rcu_access_pointer() needs no such
protection
> for (i = 0; i < dev->num_tx_queues; i++) {
> struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
> - if (txq->qdisc != txq->qdisc_sleeping)
> + if (rcu_access_pointer(txq->qdisc) != txq->qdisc_sleeping) {
> + rcu_read_unlock();
> return true;
> + }
> }
> + rcu_read_unlock();
> return false;
> }
>
> @@ -428,11 +440,16 @@ static inline bool qdisc_tx_changing(const struct net_device *dev)
> static inline bool qdisc_tx_is_noop(const struct net_device *dev)
> {
> unsigned int i;
> +
> + rcu_read_lock();
No need for rcu_read_lock() : rcu_access_pointer() needs no such
protection
> for (i = 0; i < dev->num_tx_queues; i++) {
> struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
> - if (txq->qdisc != &noop_qdisc)
> + if (rcu_dereference(txq->qdisc) != &noop_qdisc) {
> + rcu_read_unlock();
> return false;
> + }
> }
> + rcu_read_unlock();
> return true;
> }
>
> diff --git a/net/core/dev.c b/net/core/dev.c
> index 3c6a967..1e25640 100644
> --- a/net/core/dev.c
> +++ b/net/core/dev.c
> @@ -2177,6 +2177,53 @@ static struct dev_kfree_skb_cb *get_kfree_skb_cb(const struct sk_buff *skb)
> return (struct dev_kfree_skb_cb *)skb->cb;
> }
>
> +void netif_schedule_queue(struct netdev_queue *txq)
> +{
> + rcu_read_lock();
> + if (!(txq->state & QUEUE_STATE_ANY_XOFF)) {
> + struct Qdisc *q = rcu_dereference(txq->qdisc);
> +
> + __netif_schedule(q);
> + }
> + rcu_read_unlock();
> +}
> +EXPORT_SYMBOL(netif_schedule_queue);
> +
> +/**
> + * netif_wake_subqueue - allow sending packets on subqueue
> + * @dev: network device
> + * @queue_index: sub queue index
> + *
> + * Resume individual transmit queue of a device with multiple transmit queues.
> + */
> +void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
> +{
> + struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
> +
> + if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)) {
> + struct Qdisc *q;
> +
> + rcu_read_lock();
> + q = rcu_dereference(txq->qdisc);
> + __netif_schedule(q);
> + rcu_read_unlock();
> + }
> +}
> +EXPORT_SYMBOL(netif_wake_subqueue);
> +
> +void netif_tx_wake_queue(struct netdev_queue *dev_queue)
> +{
> + if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state)) {
> + struct Qdisc *q;
> +
> + rcu_read_lock();
> + q = rcu_dereference(dev_queue->qdisc);
> + __netif_schedule(q);
> + rcu_read_unlock();
> + }
> +}
> +EXPORT_SYMBOL(netif_tx_wake_queue);
> +
> void __dev_kfree_skb_irq(struct sk_buff *skb, enum skb_free_reason reason)
> {
> unsigned long flags;
> @@ -3432,7 +3479,7 @@ static int ing_filter(struct sk_buff *skb, struct netdev_queue *rxq)
> skb->tc_verd = SET_TC_RTTL(skb->tc_verd, ttl);
> skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_INGRESS);
>
> - q = rxq->qdisc;
> + q = rcu_dereference(rxq->qdisc);
> if (q != &noop_qdisc) {
> spin_lock(qdisc_lock(q));
> if (likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state)))
> @@ -3449,7 +3496,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb,
> {
> struct netdev_queue *rxq = rcu_dereference(skb->dev->ingress_queue);
>
> - if (!rxq || rxq->qdisc == &noop_qdisc)
> + if (!rxq || rcu_dereference_bh(rxq->qdisc) == &noop_qdisc)
This is not consistent with previous rcu_dereference(), and anyway
you can use rcu_access_pointer()
> goto out;
>
> if (*pt_prev) {
rest was fine.
Thanks !
^ permalink raw reply
* Re: [PATCH net-next v2] r8169:add support for RTL8168H and RTL8107E
From: Ivan Vecera @ 2014-09-09 12:18 UTC (permalink / raw)
To: Hayes Wang, Hau, netdev@vger.kernel.org
Cc: nic_swsd, linux-kernel@vger.kernel.org, romieu@fr.zoreil.com
In-Reply-To: <0835B3720019904CB8F7AA43166CEEB25211E3@RTITMBSV03.realtek.com.tw>
On 9.9.2014 07:50, Hayes Wang wrote:
> From: Ivan Vecera [mailto:ivecera@redhat.com]
>> Sent: Monday, September 08, 2014 9:01 PM
>> To: Hau; netdev@vger.kernel.org
>> Cc: nic_swsd; linux-kernel@vger.kernel.org; romieu@fr.zoreil.com
>> Subject: Re: [PATCH net-next v2] r8169:add support for
>> RTL8168H and RTL8107E
> [...]
>> Where are these new firmware files ^^^^ located? They are missing at
>> git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-f
>> irmware.git
>
> We don't update them, yet. We will update them after testing all of them.
>
Thanks Hayes,
have you got any idea when do you update them?
Thanks,
Ivan
^ permalink raw reply
* Re: [net-next PATCH v3 02/15] net: rcu-ify tcf_proto
From: Eric Dumazet @ 2014-09-09 12:20 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055437.2071.86430.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:54 -0700, John Fastabend wrote:
> rcu'ify tcf_proto this allows calling tc_classify() without holding
> any locks. Updaters are protected by RTNL.
>
> This patch prepares the core net_sched infrastracture for running
> the classifier/action chains without holding the qdisc lock however
> it does nothing to ensure cls_xxx and act_xxx types also work without
> locking. Additional patches are required to address the fall out.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
> include/net/sch_generic.h | 9 +++++----
> net/sched/cls_api.c | 30 +++++++++++++++---------------
> net/sched/sch_api.c | 10 +++++-----
> net/sched/sch_atm.c | 22 +++++++++++++---------
> net/sched/sch_cbq.c | 13 +++++++++----
> net/sched/sch_choke.c | 17 ++++++++++++-----
> net/sched/sch_drr.c | 9 ++++++---
> net/sched/sch_dsmark.c | 9 +++++----
> net/sched/sch_fq_codel.c | 11 +++++++----
> net/sched/sch_hfsc.c | 8 ++++----
> net/sched/sch_htb.c | 15 ++++++++-------
> net/sched/sch_ingress.c | 8 +++++---
> net/sched/sch_multiq.c | 8 +++++---
> net/sched/sch_prio.c | 11 +++++++----
> net/sched/sch_qfq.c | 9 ++++++---
> net/sched/sch_sfb.c | 15 +++++++++------
> net/sched/sch_sfq.c | 11 +++++++----
> 17 files changed, 128 insertions(+), 87 deletions(-)
>
> diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
> index 19b1b36..be000bb 100644
> --- a/include/net/sch_generic.h
> +++ b/include/net/sch_generic.h
> @@ -143,7 +143,7 @@ struct Qdisc_class_ops {
> void (*walk)(struct Qdisc *, struct qdisc_walker * arg);
>
> /* Filter manipulation */
> - struct tcf_proto ** (*tcf_chain)(struct Qdisc *, unsigned long);
> + struct tcf_proto __rcu ** (*tcf_chain)(struct Qdisc *, unsigned long);
> unsigned long (*bind_tcf)(struct Qdisc *, unsigned long,
> u32 classid);
> void (*unbind_tcf)(struct Qdisc *, unsigned long);
> @@ -212,8 +212,8 @@ struct tcf_proto_ops {
>
> struct tcf_proto {
> /* Fast access part */
> - struct tcf_proto *next;
> - void *root;
> + struct tcf_proto __rcu *next;
> + void __rcu *root;
> int (*classify)(struct sk_buff *,
> const struct tcf_proto *,
> struct tcf_result *);
> @@ -225,6 +225,7 @@ struct tcf_proto {
> struct Qdisc *q;
> void *data;
> const struct tcf_proto_ops *ops;
> + struct rcu_head rcu;
> };
>
> struct qdisc_skb_cb {
> @@ -378,7 +379,7 @@ struct Qdisc *qdisc_create_dflt(struct netdev_queue *dev_queue,
> void __qdisc_calculate_pkt_len(struct sk_buff *skb,
> const struct qdisc_size_table *stab);
> void tcf_destroy(struct tcf_proto *tp);
> -void tcf_destroy_chain(struct tcf_proto **fl);
> +void tcf_destroy_chain(struct tcf_proto __rcu **fl);
>
> /* Reset all TX qdiscs greater then index of a device. */
> static inline void qdisc_reset_all_tx_gt(struct net_device *dev, unsigned int i)
> diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
> index c28b0d3..e3d3c48 100644
> --- a/net/sched/cls_api.c
> +++ b/net/sched/cls_api.c
> @@ -117,7 +117,6 @@ static int tc_ctl_tfilter(struct sk_buff *skb, struct nlmsghdr *n)
> {
> struct net *net = sock_net(skb->sk);
> struct nlattr *tca[TCA_MAX + 1];
> - spinlock_t *root_lock;
> struct tcmsg *t;
> u32 protocol;
> u32 prio;
> @@ -125,7 +124,8 @@ static int tc_ctl_tfilter(struct sk_buff *skb, struct nlmsghdr *n)
> u32 parent;
> struct net_device *dev;
> struct Qdisc *q;
> - struct tcf_proto **back, **chain;
> + struct tcf_proto __rcu **back;
> + struct tcf_proto __rcu **chain;
> struct tcf_proto *tp;
> const struct tcf_proto_ops *tp_ops;
> const struct Qdisc_class_ops *cops;
> @@ -197,7 +197,9 @@ replay:
> goto errout;
>
> /* Check the chain for existence of proto-tcf with this priority */
> - for (back = chain; (tp = *back) != NULL; back = &tp->next) {
> + for (back = chain;
> + (tp = rtnl_dereference(*back)) != NULL;
> + back = &tp->next) {
> if (tp->prio >= prio) {
> if (tp->prio == prio) {
> if (!nprio ||
> @@ -209,8 +211,6 @@ replay:
> }
> }
>
> - root_lock = qdisc_root_sleeping_lock(q);
> -
> if (tp == NULL) {
> /* Proto-tcf does not exist, create new one */
>
> @@ -259,7 +259,8 @@ replay:
> }
> tp->ops = tp_ops;
> tp->protocol = protocol;
> - tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back));
> + tp->prio = nprio ? :
> + TC_H_MAJ(tcf_auto_prio(rtnl_dereference(*back)));
> tp->q = q;
> tp->classify = tp_ops->classify;
> tp->classid = parent;
> @@ -280,9 +281,9 @@ replay:
>
> if (fh == 0) {
> if (n->nlmsg_type == RTM_DELTFILTER && t->tcm_handle == 0) {
> - spin_lock_bh(root_lock);
> - *back = tp->next;
> - spin_unlock_bh(root_lock);
> + struct tcf_proto *next = rtnl_dereference(tp->next);
> +
> + rcu_assign_pointer(*back, next);
RCU_ACCESS_POINTER() is sufficient here. (vi +999
include/linux/rcupdate.h if you want exact details)
>
> tfilter_notify(net, skb, n, tp, fh, RTM_DELTFILTER);
> tcf_destroy(tp);
> @@ -322,10 +323,8 @@ replay:
> n->nlmsg_flags & NLM_F_CREATE ? TCA_ACT_NOREPLACE : TCA_ACT_REPLACE);
> if (err == 0) {
> if (tp_created) {
> - spin_lock_bh(root_lock);
> - tp->next = *back;
> - *back = tp;
> - spin_unlock_bh(root_lock);
> + rcu_assign_pointer(tp->next, rtnl_dereference(*back));
The first rcu_assign_pointer() should be an RCU_ACCESS_POINTER() : tp is
not yet visible to any reader.
> + rcu_assign_pointer(*back, tp);
This one is OK.
> }
> tfilter_notify(net, skb, n, tp, fh, RTM_NEWTFILTER);
> } else {
> @@ -420,7 +419,7 @@ static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
> int s_t;
> struct net_device *dev;
> struct Qdisc *q;
> - struct tcf_proto *tp, **chain;
> + struct tcf_proto *tp, __rcu **chain;
> struct tcmsg *tcm = nlmsg_data(cb->nlh);
> unsigned long cl = 0;
> const struct Qdisc_class_ops *cops;
> @@ -454,7 +453,8 @@ static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
>
> s_t = cb->args[0];
>
> - for (tp = *chain, t = 0; tp; tp = tp->next, t++) {
> + for (tp = rtnl_dereference(*chain), t = 0;
> + tp; tp = rtnl_dereference(tp->next), t++) {
> if (t < s_t)
> continue;
> if (TC_H_MAJ(tcm->tcm_info) &&
> diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
> index 58bed75..7c57867 100644
> --- a/net/sched/sch_api.c
> +++ b/net/sched/sch_api.c
> @@ -1781,7 +1781,7 @@ int tc_classify_compat(struct sk_buff *skb, const struct tcf_proto *tp,
> __be16 protocol = skb->protocol;
> int err;
>
> - for (; tp; tp = tp->next) {
> + for (; tp; tp = rcu_dereference_bh(tp->next)) {
> if (tp->protocol != protocol &&
> tp->protocol != htons(ETH_P_ALL))
> continue;
> @@ -1833,15 +1833,15 @@ void tcf_destroy(struct tcf_proto *tp)
> {
> tp->ops->destroy(tp);
> module_put(tp->ops->owner);
> - kfree(tp);
> + kfree_rcu(tp, rcu);
> }
>
> -void tcf_destroy_chain(struct tcf_proto **fl)
> +void tcf_destroy_chain(struct tcf_proto __rcu **fl)
> {
> struct tcf_proto *tp;
>
> - while ((tp = *fl) != NULL) {
> - *fl = tp->next;
> + while ((tp = rtnl_dereference(*fl)) != NULL) {
> + rcu_assign_pointer(*fl, tp->next);
RCU_ACCESS_POINTER()
> tcf_destroy(tp);
> }
> }
> diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
> index 8449b33..9140bb0 100644
> --- a/net/sched/sch_atm.c
> +++ b/net/sched/sch_atm.c
> @@ -41,7 +41,7 @@
>
> struct atm_flow_data {
> struct Qdisc *q; /* FIFO, TBF, etc. */
> - struct tcf_proto *filter_list;
> + struct tcf_proto __rcu *filter_list;
> struct atm_vcc *vcc; /* VCC; NULL if VCC is closed */
> void (*old_pop)(struct atm_vcc *vcc,
> struct sk_buff *skb); /* chaining */
> @@ -142,7 +142,9 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl)
> list_del_init(&flow->list);
> pr_debug("atm_tc_put: qdisc %p\n", flow->q);
> qdisc_destroy(flow->q);
> +
Please refrain doing this cleanups as much as possible ;)
> tcf_destroy_chain(&flow->filter_list);
> +
Same here
> if (flow->sock) {
> pr_debug("atm_tc_put: f_count %ld\n",
> file_count(flow->sock->file));
> @@ -273,7 +275,7 @@ static int atm_tc_change(struct Qdisc *sch, u32 classid, u32 parent,
> error = -ENOBUFS;
> goto err_out;
> }
> - flow->filter_list = NULL;
> + RCU_INIT_POINTER(flow->filter_list, NULL);
> flow->q = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, classid);
> if (!flow->q)
> flow->q = &noop_qdisc;
> @@ -311,7 +313,7 @@ static int atm_tc_delete(struct Qdisc *sch, unsigned long arg)
> pr_debug("atm_tc_delete(sch %p,[qdisc %p],flow %p)\n", sch, p, flow);
> if (list_empty(&flow->list))
> return -EINVAL;
> - if (flow->filter_list || flow == &p->link)
> + if (rtnl_dereference(flow->filter_list) || flow == &p->link)
rcu_access_pointer()
> return -EBUSY;
> /*
> * Reference count must be 2: one for "keepalive" (set at class
> @@ -345,7 +347,8 @@ static void atm_tc_walk(struct Qdisc *sch, struct qdisc_walker *walker)
> }
> }
>
> -static struct tcf_proto **atm_tc_find_tcf(struct Qdisc *sch, unsigned long cl)
> +static struct tcf_proto __rcu **atm_tc_find_tcf(struct Qdisc *sch,
> + unsigned long cl)
> {
> struct atm_qdisc_data *p = qdisc_priv(sch);
> struct atm_flow_data *flow = (struct atm_flow_data *)cl;
> @@ -369,11 +372,12 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
> flow = NULL;
> if (TC_H_MAJ(skb->priority) != sch->handle ||
> !(flow = (struct atm_flow_data *)atm_tc_get(sch, skb->priority))) {
> + struct tcf_proto *fl;
> +
> list_for_each_entry(flow, &p->flows, list) {
> - if (flow->filter_list) {
> - result = tc_classify_compat(skb,
> - flow->filter_list,
> - &res);
> + fl = rcu_dereference_bh(flow->filter_list);
> + if (fl) {
> + result = tc_classify_compat(skb, fl, &res);
> if (result < 0)
> continue;
> flow = (struct atm_flow_data *)res.class;
> @@ -544,7 +548,7 @@ static int atm_tc_init(struct Qdisc *sch, struct nlattr *opt)
> if (!p->link.q)
> p->link.q = &noop_qdisc;
> pr_debug("atm_tc_init: link (%p) qdisc %p\n", &p->link, p->link.q);
> - p->link.filter_list = NULL;
> + RCU_INIT_POINTER(p->link.filter_list, NULL);
> p->link.vcc = NULL;
> p->link.sock = NULL;
> p->link.classid = sch->handle;
> diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
> index 762a04b..80231d9 100644
> --- a/net/sched/sch_cbq.c
> +++ b/net/sched/sch_cbq.c
> @@ -133,7 +133,7 @@ struct cbq_class {
> struct gnet_stats_rate_est64 rate_est;
> struct tc_cbq_xstats xstats;
>
> - struct tcf_proto *filter_list;
> + struct tcf_proto __rcu *filter_list;
>
> int refcnt;
> int filters;
> @@ -221,6 +221,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
> struct cbq_class **defmap;
> struct cbq_class *cl = NULL;
> u32 prio = skb->priority;
> + struct tcf_proto *fl;
> struct tcf_result res;
>
> /*
> @@ -233,13 +234,15 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
> *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
> for (;;) {
> int result = 0;
> +
Please remove this NL
> defmap = head->defaults;
>
> + fl = rcu_dereference_bh(head->filter_list);
> /*
> * Step 2+n. Apply classifier.
> */
> - if (!head->filter_list ||
> - (result = tc_classify_compat(skb, head->filter_list, &res)) < 0)
> + result = tc_classify_compat(skb, fl, &res);
> + if (!fl || result < 0)
> goto fallback;
>
> cl = (void *)res.class;
> @@ -1667,6 +1670,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl)
> WARN_ON(cl->filters);
>
> tcf_destroy_chain(&cl->filter_list);
> +
Please remove this NL
> qdisc_destroy(cl->q);
> qdisc_put_rtab(cl->R_tab);
> gen_kill_estimator(&cl->bstats, &cl->rate_est);
> @@ -1954,7 +1958,8 @@ static int cbq_delete(struct Qdisc *sch, unsigned long arg)
> return 0;
> }
>
// rest of patch was good.
Thanks !
^ permalink raw reply
* Re: [net-next PATCH v3 03/15] net: sched: cls_basic use RCU
From: Eric Dumazet @ 2014-09-09 12:29 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055507.2071.68285.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:55 -0700, John Fastabend wrote:
> Enable basic classifier for RCU.
>
> Dereferencing tp->root may look a bit strange here but it is needed
> by my accounting because it is allocated at init time and needs to
> be kfree'd at destroy time. However because it may be referenced in
> the classify() path we must wait an RCU grace period before free'ing
> it. We use kfree_rcu() and rcu_ APIs to enforce this. This pattern
> is used in all the classifiers.
>
> Also the hgenerator can be incremented without concern because it
> is always incremented under RTNL.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
Acked-by: Eric Dumazet <edumazet@google.com>
^ permalink raw reply
* Re: [net-next PATCH v3 04/15] net: sched: cls_cgroup use RCU
From: Eric Dumazet @ 2014-09-09 12:34 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055534.2071.64610.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:55 -0700, John Fastabend wrote:
> Make cgroup classifier safe for RCU.
>
> Also drops the calls in the classify routine that were doing a
> rcu_read_lock()/rcu_read_unlock(). If the rcu_read_lock() isn't held
> entering this routine we have issues with deleting the classifier
> chain so remove the unnecessary rcu_read_lock()/rcu_read_unlock()
> pair noting all paths AFAIK hold rcu_read_lock.
>
> If there is a case where classify is called without the rcu read lock
> then an rcu splat will occur and we can correct it.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
^ permalink raw reply
* Re: [net-next PATCH v3 05/15] net: sched: cls_flow use RCU
From: Eric Dumazet @ 2014-09-09 12:41 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055601.2071.43459.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:56 -0700, John Fastabend wrote:
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
> net/sched/cls_flow.c | 145 +++++++++++++++++++++++++++++---------------------
> 1 file changed, 84 insertions(+), 61 deletions(-)
>
> diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
> index 35be16f..e33560b 100644
> --- a/net/sched/cls_flow.c
> +++ b/net/sched/cls_flow.c
> @@ -34,12 +34,15 @@
>
> struct flow_head {
> struct list_head filters;
> + struct rcu_head rcu;
> };
>
> struct flow_filter {
> struct list_head list;
> + struct rcu_head rcu;
Please move these 2 new fields at the end of structure, they are only
used at dismantle phase.
Patch looks fine otherwise, thanks !
^ permalink raw reply
* Re: [net-next PATCH v3 06/15] net: sched: fw use RCU
From: Eric Dumazet @ 2014-09-09 12:48 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055636.2071.88596.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:56 -0700, John Fastabend wrote:
> RCU'ify fw classifier.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
> net/sched/cls_fw.c | 111 ++++++++++++++++++++++++++++++++++++----------------
> 1 file changed, 77 insertions(+), 34 deletions(-)
>
> diff --git a/net/sched/cls_fw.c b/net/sched/cls_fw.c
> index 861b03c..4809500 100644
> --- a/net/sched/cls_fw.c
> +++ b/net/sched/cls_fw.c
> @@ -33,17 +33,20 @@
>
> struct fw_head {
> u32 mask;
> - struct fw_filter *ht[HTSIZE];
> + struct fw_filter __rcu *ht[HTSIZE];
> + struct rcu_head rcu;
> };
>
> struct fw_filter {
> - struct fw_filter *next;
> + struct fw_filter __rcu *next;
> u32 id;
> struct tcf_result res;
> #ifdef CONFIG_NET_CLS_IND
> int ifindex;
> #endif /* CONFIG_NET_CLS_IND */
> struct tcf_exts exts;
> + struct tcf_proto *tp;
> + struct rcu_head rcu;
> };
>
> static u32 fw_hash(u32 handle)
> @@ -56,14 +59,16 @@ static u32 fw_hash(u32 handle)
> static int fw_classify(struct sk_buff *skb, const struct tcf_proto *tp,
> struct tcf_result *res)
> {
> - struct fw_head *head = tp->root;
> + struct fw_head *head = rcu_dereference_bh(tp->root);
> struct fw_filter *f;
> int r;
> u32 id = skb->mark;
>
> if (head != NULL) {
> id &= head->mask;
> - for (f = head->ht[fw_hash(id)]; f; f = f->next) {
> +
> + for (f = rcu_dereference_bh(head->ht[fw_hash(id)]); f;
> + f = rcu_dereference_bh(f->next)) {
> if (f->id == id) {
> *res = f->res;
> #ifdef CONFIG_NET_CLS_IND
> @@ -92,13 +97,14 @@ static int fw_classify(struct sk_buff *skb, const struct tcf_proto *tp,
>
> static unsigned long fw_get(struct tcf_proto *tp, u32 handle)
> {
> - struct fw_head *head = tp->root;
> + struct fw_head *head = rtnl_dereference(tp->root);
> struct fw_filter *f;
>
> if (head == NULL)
> return 0;
>
> - for (f = head->ht[fw_hash(handle)]; f; f = f->next) {
> + f = rtnl_dereference(head->ht[fw_hash(handle)]);
> + for (; f; f = rtnl_dereference(f->next)) {
> if (f->id == handle)
> return (unsigned long)f;
> }
> @@ -114,8 +120,11 @@ static int fw_init(struct tcf_proto *tp)
> return 0;
> }
>
> -static void fw_delete_filter(struct tcf_proto *tp, struct fw_filter *f)
> +static void fw_delete_filter(struct rcu_head *head)
> {
> + struct fw_filter *f = container_of(head, struct fw_filter, rcu);
> + struct tcf_proto *tp = f->tp;
> +
> tcf_unbind_filter(tp, &f->res);
> tcf_exts_destroy(tp, &f->exts);
> kfree(f);
> @@ -123,7 +132,7 @@ static void fw_delete_filter(struct tcf_proto *tp, struct fw_filter *f)
>
> static void fw_destroy(struct tcf_proto *tp)
> {
> - struct fw_head *head = tp->root;
> + struct fw_head *head = rtnl_dereference(tp->root);
> struct fw_filter *f;
> int h;
>
> @@ -131,29 +140,33 @@ static void fw_destroy(struct tcf_proto *tp)
> return;
>
> for (h = 0; h < HTSIZE; h++) {
> - while ((f = head->ht[h]) != NULL) {
> - head->ht[h] = f->next;
> - fw_delete_filter(tp, f);
> + while ((f = rtnl_dereference(head->ht[h])) != NULL) {
> + rcu_assign_pointer(head->ht[h],
> + rtnl_dereference(f->next));
RCU_INIT_POINTER()
> + call_rcu(&f->rcu, fw_delete_filter);
> }
> }
> - kfree(head);
> + RCU_INIT_POINTER(tp->root, NULL);
> + kfree_rcu(head, rcu);
> }
>
> static int fw_delete(struct tcf_proto *tp, unsigned long arg)
> {
> - struct fw_head *head = tp->root;
> + struct fw_head *head = rtnl_dereference(tp->root);
> struct fw_filter *f = (struct fw_filter *)arg;
> - struct fw_filter **fp;
> + struct fw_filter __rcu **fp;
> + struct fw_filter *pfp;
>
> if (head == NULL || f == NULL)
> goto out;
>
> - for (fp = &head->ht[fw_hash(f->id)]; *fp; fp = &(*fp)->next) {
> - if (*fp == f) {
> - tcf_tree_lock(tp);
> - *fp = f->next;
> - tcf_tree_unlock(tp);
> - fw_delete_filter(tp, f);
> + fp = &head->ht[fw_hash(f->id)];
> +
> + for (pfp = rtnl_dereference(*fp); pfp;
> + fp = &pfp->next, pfp = rtnl_dereference(*fp)) {
> + if (pfp == f) {
> + rcu_assign_pointer(*fp, rtnl_dereference(f->next));
RCU_INIT_POINTER()
> + call_rcu(&f->rcu, fw_delete_filter);
> return 0;
> }
> }
> @@ -171,7 +184,7 @@ static int
> fw_change_attrs(struct net *net, struct tcf_proto *tp, struct fw_filter *f,
> struct nlattr **tb, struct nlattr **tca, unsigned long base, bool ovr)
> {
> - struct fw_head *head = tp->root;
> + struct fw_head *head = rtnl_dereference(tp->root);
> struct tcf_exts e;
> u32 mask;
> int err;
> @@ -220,7 +233,7 @@ static int fw_change(struct net *net, struct sk_buff *in_skb,
> struct nlattr **tca,
> unsigned long *arg, bool ovr)
> {
> - struct fw_head *head = tp->root;
> + struct fw_head *head = rtnl_dereference(tp->root);
> struct fw_filter *f = (struct fw_filter *) *arg;
> struct nlattr *opt = tca[TCA_OPTIONS];
> struct nlattr *tb[TCA_FW_MAX + 1];
> @@ -233,10 +246,42 @@ static int fw_change(struct net *net, struct sk_buff *in_skb,
> if (err < 0)
> return err;
>
> - if (f != NULL) {
> + if (f) {
> + struct fw_filter *pfp, *fnew;
> + struct fw_filter __rcu **fp;
> +
> if (f->id != handle && handle)
> return -EINVAL;
> - return fw_change_attrs(net, tp, f, tb, tca, base, ovr);
> +
> + fnew = kzalloc(sizeof(struct fw_filter), GFP_KERNEL);
> + if (!fnew)
> + return -ENOBUFS;
> +
> + fnew->id = f->id;
> + fnew->res = f->res;
> +#ifdef CONFIG_NET_CLS_IND
> + fnew->ifindex = f->ifindex;
> +#endif /* CONFIG_NET_CLS_IND */
> + fnew->tp = f->tp;
> +
> + err = fw_change_attrs(net, tp, fnew, tb, tca, base, ovr);
> + if (err < 0) {
> + kfree(fnew);
> + return err;
> + }
> +
> + fp = &head->ht[fw_hash(fnew->id)];
> + for (pfp = rtnl_dereference(*fp); pfp;
> + fp = &pfp->next, pfp = rtnl_dereference(*fp))
> + if (pfp == f)
> + break;
> +
> + rcu_assign_pointer(fnew->next, rtnl_dereference(pfp->next));
RCU_INIT_POINTER()
> + rcu_assign_pointer(*fp, fnew);
This one is fine
> + call_rcu(&f->rcu, fw_delete_filter);
> +
> + *arg = (unsigned long)fnew;
> + return err;
> }
>
> if (!handle)
> @@ -252,9 +297,7 @@ static int fw_change(struct net *net, struct sk_buff *in_skb,
> return -ENOBUFS;
> head->mask = mask;
>
> - tcf_tree_lock(tp);
> - tp->root = head;
> - tcf_tree_unlock(tp);
> + rcu_assign_pointer(tp->root, head);
> }
>
> f = kzalloc(sizeof(struct fw_filter), GFP_KERNEL);
> @@ -263,15 +306,14 @@ static int fw_change(struct net *net, struct sk_buff *in_skb,
>
> tcf_exts_init(&f->exts, TCA_FW_ACT, TCA_FW_POLICE);
> f->id = handle;
> + f->tp = tp;
>
> err = fw_change_attrs(net, tp, f, tb, tca, base, ovr);
> if (err < 0)
> goto errout;
>
> - f->next = head->ht[fw_hash(handle)];
> - tcf_tree_lock(tp);
> - head->ht[fw_hash(handle)] = f;
> - tcf_tree_unlock(tp);
> + rcu_assign_pointer(f->next, head->ht[fw_hash(handle)]);
RCU_INIT_POINTER()
> + rcu_assign_pointer(head->ht[fw_hash(handle)], f);
This one is fine.
>
> *arg = (unsigned long)f;
> return 0;
> @@ -283,7 +325,7 @@ errout:
Thanks
^ permalink raw reply
* Re: [PATCH net] ipv6: refresh rt6i_genid in ip6_pol_route()
From: Hannes Frederic Sowa @ 2014-09-09 12:58 UTC (permalink / raw)
To: Eric Dumazet
Cc: David Miller, nicolas.dichtel, therbert, alexander.h.duyck,
netdev
In-Reply-To: <1410152829.11872.84.camel@edumazet-glaptop2.roam.corp.google.com>
On So, 2014-09-07 at 22:07 -0700, Eric Dumazet wrote:
> On Sun, 2014-09-07 at 21:59 -0700, David Miller wrote:
> > From: Eric Dumazet <eric.dumazet@gmail.com>
> > Date: Sun, 07 Sep 2014 21:43:54 -0700
> >
> > > On Sun, 2014-09-07 at 21:27 -0700, David Miller wrote:
> > >> From: Eric Dumazet <eric.dumazet@gmail.com>
> > >> Date: Sun, 07 Sep 2014 21:18:25 -0700
> > >>
> > >> > On Sun, 2014-09-07 at 15:54 -0700, David Miller wrote:
> > >> >
> > >> >> This might be broken.
> > >> >>
> > >> >> We are dealing here with persistent entries in the ipv6 routine trie.
> > >> >>
> > >> >> If you just bump the genid on the next person to look it up, other
> > >> >> sockets and cached entities might not have validated the route yet,
> > >> >> and now will falsely see the route as valid. We have to ensure that
> > >> >> they too drop this route and perform a relookup.
> > >> >
> > >> > I am confused, I thought it was the role of the cookie.
> > >> >
> > >> > (Ie socket has to store its own cookie to be able to validate a route)
> > >> >
> > >> > Before 6f3118b571b8 patch, how was this done anyway ?
> > >> >
> > >> > If persistent routes cannot refresh the genid, then they are useless ?
> > >>
> > >> I just speak about the genid aspect.
> > >>
> > >> I understand that cookie (via node->fn_sernum) invalidates the path
> > >> in the fib_trie, but the genid protects against other circumstances
> > >> (matching IPSEC rule, f.e.)
> > >>
> > >> You have to make sure all other sockets did a full route lookup
> > >> (including IPSEC) before you can safely adjust the genid.
> > >>
> > >> I could be wrong, recheck my analysis please :-)
> > >
> > > So this whole genid protection can not work, unless we make sure a
> > > socket cannot share a route with another socket.
> > >
> > > This means we have to clone all routes.
> >
> > I'm willing to revert the change in question if you think that's the
> > sanest way forward.
> >
> > The bug fix for more obscure use cases (IPSEC) if pointless if it
> > breaks more common things (TCP input route caching).
>
> Lets wait for Nicolas and/or Hannes input, they might have some ideas...
My first idea was to remove rt_genid check in ip6_dst_check completely
and rt_genid_bump_ipv6() should walk the trie to increase fib6_sernum in
rt6i_nodes. I'll try this.
^ permalink raw reply
* Re: [net-next PATCH v3 07/15] net: sched: RCU cls_route
From: Eric Dumazet @ 2014-09-09 12:59 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055703.2071.75757.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:57 -0700, John Fastabend wrote:
> RCUify the route classifier. For now however spinlock's are used to
> protect fastmap cache.
>
> The issue here is the fastmap may be read by one CPU while the
> cache is being updated by another. An array of pointers could be
> one possible solution.
Yep, this doesnt seem like an urgent issue anyway.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
...
>
> static void route4_destroy(struct tcf_proto *tp)
> {
> - struct route4_head *head = tp->root;
> + struct route4_head *head = rtnl_dereference(tp->root);
> int h1, h2;
>
> if (head == NULL)
> @@ -266,28 +287,35 @@ static void route4_destroy(struct tcf_proto *tp)
> for (h1 = 0; h1 <= 256; h1++) {
> struct route4_bucket *b;
>
> - b = head->table[h1];
> + b = rtnl_dereference(head->table[h1]);
> if (b) {
> for (h2 = 0; h2 <= 32; h2++) {
> struct route4_filter *f;
>
> - while ((f = b->ht[h2]) != NULL) {
> - b->ht[h2] = f->next;
> - route4_delete_filter(tp, f);
> + while ((f = rtnl_dereference(b->ht[h2])) != NULL) {
> + struct route4_filter *next;
> +
> + next = rtnl_dereference(f->next);
> + rcu_assign_pointer(b->ht[h2], next);
RCU_INIT_POINTER(), or simply : b->ht[h2] = f->next;
> + call_rcu(&f->rcu, route4_delete_filter);
> }
> }
> - kfree(b);
> + RCU_INIT_POINTER(head->table[h1], NULL);
> + kfree_rcu(b, rcu);
> }
> }
> - kfree(head);
> + RCU_INIT_POINTER(tp->root, NULL);
> + kfree_rcu(head, rcu);
> }
>
> static int route4_delete(struct tcf_proto *tp, unsigned long arg)
> {
> - struct route4_head *head = tp->root;
> - struct route4_filter **fp, *f = (struct route4_filter *)arg;
> - unsigned int h = 0;
> + struct route4_head *head = rtnl_dereference(tp->root);
> + struct route4_filter *f = (struct route4_filter *)arg;
> + struct route4_filter __rcu **fp;
> + struct route4_filter *nf;
> struct route4_bucket *b;
> + unsigned int h = 0;
> int i;
>
> if (!head || !f)
> @@ -296,27 +324,35 @@ static int route4_delete(struct tcf_proto *tp, unsigned long arg)
> h = f->handle;
> b = f->bkt;
>
> - for (fp = &b->ht[from_hash(h >> 16)]; *fp; fp = &(*fp)->next) {
> - if (*fp == f) {
> - tcf_tree_lock(tp);
> + fp = &b->ht[from_hash(h >> 16)];
> + for (nf = rtnl_dereference(*fp); nf;
> + fp = &nf->next, nf = rtnl_dereference(*fp)) {
> + if (nf == f) {
> + /* unlink it */
> *fp = f->next;
Strange you left this without annotations, while rest of your patches
always use rcu_assign_pointer(*fp, rtnl_dereference(f->next)
Note that it is absolutely fine to use *fp = f->next;
;)
> - tcf_tree_unlock(tp);
>
^ permalink raw reply
* Re: [net-next PATCH v3 09/15] net: sched: make cls_u32 lockless
From: Eric Dumazet @ 2014-09-09 13:20 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055815.2071.39668.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:58 -0700, John Fastabend wrote:
> Make cls_u32 classifier safe to run without holding lock. This patch
> converts statistics that are kept in read section u32_classify into
> per cpu counters.
>
> This patch was tested with a tight u32 filter add/delete loop while
> generating traffic with pktgen. By running pktgen on vlan devices
> created on top of a physical device we can hit the qdisc layer
> correctly. For ingress qdisc's a loopback cable was used.
>
> for i in {1..100}; do
> q=`echo $i%8|bc`;
> echo -n "u32 tos: iteration $i on queue $q";
> tc filter add dev p3p2 parent $p prio $i u32 match ip tos 0x10 0xff \
> action skbedit queue_mapping $q;
> sleep 1;
> tc filter del dev p3p2 prio $i;
>
> echo -n "u32 tos hash table: iteration $i on queue $q";
> tc filter add dev p3p2 parent $p protocol ip prio $i handle 628: u32 divisor 1
> tc filter add dev p3p2 parent $p protocol ip prio $i u32 \
> match ip protocol 17 0xff link 628: offset at 0 mask 0xf00 shift 6 plus 0
> tc filter add dev p3p2 parent $p protocol ip prio $i u32 \
> ht 628:0 match ip tos 0x10 0xff action skbedit queue_mapping $q
> sleep 2;
> tc filter del dev p3p2 prio $i
> sleep 1;
> done
>
Note it might be easier to split this patch in 2 parts.
(The percpu stuff could be done in a first step, then rcu conversion)
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
> net/sched/cls_u32.c | 258 +++++++++++++++++++++++++++++++++------------------
> 1 file changed, 169 insertions(+), 89 deletions(-)
>
> diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
> index 70c0be8..edbbd53 100644
> --- a/net/sched/cls_u32.c
> +++ b/net/sched/cls_u32.c
> @@ -36,6 +36,7 @@
> #include <linux/kernel.h>
> #include <linux/string.h>
> #include <linux/errno.h>
> +#include <linux/percpu.h>
> #include <linux/rtnetlink.h>
> #include <linux/skbuff.h>
> #include <linux/bitmap.h>
> @@ -44,40 +45,46 @@
> #include <net/pkt_cls.h>
>
> struct tc_u_knode {
> - struct tc_u_knode *next;
> + struct tc_u_knode __rcu *next;
> u32 handle;
> - struct tc_u_hnode *ht_up;
> + struct tc_u_hnode __rcu *ht_up;
> struct tcf_exts exts;
> #ifdef CONFIG_NET_CLS_IND
> int ifindex;
> #endif
> u8 fshift;
> struct tcf_result res;
> - struct tc_u_hnode *ht_down;
> + struct tc_u_hnode __rcu *ht_down;
> #ifdef CONFIG_CLS_U32_PERF
> - struct tc_u32_pcnt *pf;
> + struct tc_u32_pcnt __percpu *pf;
> #endif
> #ifdef CONFIG_CLS_U32_MARK
> - struct tc_u32_mark mark;
> + u32 val;
> + u32 mask;
> + u32 __percpu *pcpu_success;
> #endif
> + struct tcf_proto *tp;
> struct tc_u32_sel sel;
> + struct rcu_head rcu;
> };
>
> struct tc_u_hnode {
> - struct tc_u_hnode *next;
> + struct tc_u_hnode __rcu *next;
> u32 handle;
> u32 prio;
> struct tc_u_common *tp_c;
> int refcnt;
> unsigned int divisor;
> - struct tc_u_knode *ht[1];
> + struct tc_u_knode __rcu *ht[1];
> + struct rcu_head rcu;
> };
>
> struct tc_u_common {
> - struct tc_u_hnode *hlist;
> + struct tc_u_hnode __rcu *hlist;
> struct Qdisc *q;
> int refcnt;
> u32 hgenerator;
> + struct rcu_head rcu;
> };
>
> static inline unsigned int u32_hash_fold(__be32 key,
> @@ -96,7 +103,7 @@ static int u32_classify(struct sk_buff *skb, const struct tcf_proto *tp, struct
> unsigned int off;
> } stack[TC_U32_MAXDEPTH];
>
> - struct tc_u_hnode *ht = tp->root;
> + struct tc_u_hnode *ht = rcu_dereference_bh(tp->root);
> unsigned int off = skb_network_offset(skb);
> struct tc_u_knode *n;
> int sdepth = 0;
> @@ -108,23 +115,23 @@ static int u32_classify(struct sk_buff *skb, const struct tcf_proto *tp, struct
> int i, r;
>
> next_ht:
> - n = ht->ht[sel];
> + n = rcu_dereference_bh(ht->ht[sel]);
>
> next_knode:
> if (n) {
> struct tc_u32_key *key = n->sel.keys;
>
> #ifdef CONFIG_CLS_U32_PERF
> - n->pf->rcnt += 1;
> + this_cpu_inc(n->pf->rcnt);
As we run in BH, we are not preemptable, we can use instead :
__this_cpu_inc() (on all occurrences)
Using a macro would also reduce the #ifdef mess of this file
> j = 0;
> #endif
>
> #ifdef CONFIG_CLS_U32_MARK
> - if ((skb->mark & n->mark.mask) != n->mark.val) {
> - n = n->next;
> + if ((skb->mark & n->mask) != n->val) {
> + n = rcu_dereference_bh(n->next);
> goto next_knode;
> } else {
> - n->mark.success++;
> + this_cpu_inc(*n->pcpu_success);
> }
> #endif
>
> @@ -139,37 +146,39 @@ next_knode:
> if (!data)
> goto out;
> if ((*data ^ key->val) & key->mask) {
> - n = n->next;
> + n = rcu_dereference_bh(n->next);
> goto next_knode;
> }
> #ifdef CONFIG_CLS_U32_PERF
> - n->pf->kcnts[j] += 1;
> + this_cpu_inc(n->pf->kcnts[j]);
> j++;
> #endif
> }
> - if (n->ht_down == NULL) {
> +
> + ht = rcu_dereference_bh(n->ht_down);
> + if (!ht) {
> check_terminal:
> if (n->sel.flags & TC_U32_TERMINAL) {
>
> *res = n->res;
> #ifdef CONFIG_NET_CLS_IND
> if (!tcf_match_indev(skb, n->ifindex)) {
> - n = n->next;
> + n = rcu_dereference_bh(n->next);
> goto next_knode;
> }
> #endif
> #ifdef CONFIG_CLS_U32_PERF
> - n->pf->rhit += 1;
> + this_cpu_inc(n->pf->rhit);
> #endif
> r = tcf_exts_exec(skb, &n->exts, res);
> if (r < 0) {
> - n = n->next;
> + n = rcu_dereference_bh(n->next);
> goto next_knode;
> }
>
> return r;
> }
> - n = n->next;
> + n = rcu_dereference_bh(n->next);
> goto next_knode;
> }
>
> @@ -180,7 +189,7 @@ check_terminal:
> stack[sdepth].off = off;
> sdepth++;
>
> - ht = n->ht_down;
> + ht = rcu_dereference_bh(n->ht_down);
> sel = 0;
> if (ht->divisor) {
> __be32 *data, hdata;
> @@ -222,7 +231,7 @@ check_terminal:
> /* POP */
> if (sdepth--) {
> n = stack[sdepth].knode;
> - ht = n->ht_up;
> + ht = rcu_dereference_bh(n->ht_up);
> off = stack[sdepth].off;
> goto check_terminal;
> }
> @@ -239,7 +248,9 @@ u32_lookup_ht(struct tc_u_common *tp_c, u32 handle)
> {
> struct tc_u_hnode *ht;
>
> - for (ht = tp_c->hlist; ht; ht = ht->next)
> + for (ht = rtnl_dereference(tp_c->hlist);
> + ht;
> + ht = rtnl_dereference(ht->next))
> if (ht->handle == handle)
> break;
>
> @@ -256,7 +267,9 @@ u32_lookup_key(struct tc_u_hnode *ht, u32 handle)
> if (sel > ht->divisor)
> goto out;
>
> - for (n = ht->ht[sel]; n; n = n->next)
> + for (n = rtnl_dereference(ht->ht[sel]);
> + n;
> + n = rtnl_dereference(n->next))
> if (n->handle == handle)
> break;
> out:
> @@ -270,7 +283,7 @@ static unsigned long u32_get(struct tcf_proto *tp, u32 handle)
> struct tc_u_common *tp_c = tp->data;
>
> if (TC_U32_HTID(handle) == TC_U32_ROOT)
> - ht = tp->root;
> + ht = rtnl_dereference(tp->root);
> else
> ht = u32_lookup_ht(tp_c, TC_U32_HTID(handle));
>
> @@ -291,6 +304,9 @@ static u32 gen_new_htid(struct tc_u_common *tp_c)
> {
> int i = 0x800;
>
> + /* hgenerator only used inside rtnl lock it is safe to increment
> + * without read _copy_ update semantics
> + */
> do {
> if (++tp_c->hgenerator == 0x7FF)
> tp_c->hgenerator = 1;
> @@ -326,11 +342,11 @@ static int u32_init(struct tcf_proto *tp)
> }
>
> tp_c->refcnt++;
> - root_ht->next = tp_c->hlist;
> - tp_c->hlist = root_ht;
> + rcu_assign_pointer(root_ht->next, tp_c->hlist);
RCU_INIT_POINTER() or root_ht->next = tp_c->hlist;
> + rcu_assign_pointer(tp_c->hlist, root_ht);
> root_ht->tp_c = tp_c;
>
> - tp->root = root_ht;
> + rcu_assign_pointer(tp->root, root_ht);
> tp->data = tp_c;
> return 0;
> }
> @@ -342,25 +358,33 @@ static int u32_destroy_key(struct tcf_proto *tp, struct tc_u_knode *n)
> if (n->ht_down)
> n->ht_down->refcnt--;
> #ifdef CONFIG_CLS_U32_PERF
> - kfree(n->pf);
> + free_percpu(n->pf);
> #endif
> kfree(n);
> return 0;
> }
>
> +void __u32_delete_key(struct rcu_head *rcu)
Can we consistently use _rcu, as in u32_delete_key_rcu() ?
> +{
> + struct tc_u_knode *key = container_of(rcu, struct tc_u_knode, rcu);
> +
> + u32_destroy_key(key->tp, key);
> +}
> +
> static int u32_delete_key(struct tcf_proto *tp, struct tc_u_knode *key)
> {
> - struct tc_u_knode **kp;
> + struct tc_u_knode __rcu **kp;
> + struct tc_u_knode *pkp;
> struct tc_u_hnode *ht = key->ht_up;
>
> if (ht) {
> - for (kp = &ht->ht[TC_U32_HASH(key->handle)]; *kp; kp = &(*kp)->next) {
> - if (*kp == key) {
> - tcf_tree_lock(tp);
> - *kp = key->next;
> - tcf_tree_unlock(tp);
> + kp = &ht->ht[TC_U32_HASH(key->handle)];
> + for (pkp = rtnl_dereference(*kp); pkp;
> + kp = &pkp->next, pkp = rtnl_dereference(*kp)) {
> + if (pkp == key) {
> + rcu_assign_pointer(*kp, key->next);
RCU_INIT_POINTER() or *kp = key->next;
>
> - u32_destroy_key(tp, key);
> + call_rcu(&key->rcu, __u32_delete_key);
> return 0;
> }
> }
> @@ -369,16 +393,16 @@ static int u32_delete_key(struct tcf_proto *tp, struct tc_u_knode *key)
> return 0;
> }
>
> -static void u32_clear_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
> +static void u32_clear_hnode(struct tc_u_hnode *ht)
> {
> struct tc_u_knode *n;
> unsigned int h;
>
> for (h = 0; h <= ht->divisor; h++) {
> - while ((n = ht->ht[h]) != NULL) {
> - ht->ht[h] = n->next;
> -
> - u32_destroy_key(tp, n);
> + while ((n = rtnl_dereference(ht->ht[h])) != NULL) {
> + rcu_assign_pointer(ht->ht[h],
> + rtnl_dereference(n->next));
RCU_INIT_POINTER() or ht->ht[h] = n->next;
> + call_rcu(&n->rcu, __u32_delete_key);
> }
> }
> }
> @@ -386,28 +410,31 @@ static void u32_clear_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
> static int u32_destroy_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
> {
> struct tc_u_common *tp_c = tp->data;
> - struct tc_u_hnode **hn;
> + struct tc_u_hnode __rcu **hn;
> + struct tc_u_hnode *phn;
>
> WARN_ON(ht->refcnt);
>
> - u32_clear_hnode(tp, ht);
> + u32_clear_hnode(ht);
>
> - for (hn = &tp_c->hlist; *hn; hn = &(*hn)->next) {
> - if (*hn == ht) {
> - *hn = ht->next;
> - kfree(ht);
> + hn = &tp_c->hlist;
> + for (phn = rtnl_dereference(*hn);
> + phn;
> + hn = &phn->next, phn = rtnl_dereference(*hn)) {
> + if (phn == ht) {
> + rcu_assign_pointer(*hn, ht->next);
RCU_INIT_POINTER() or ...
> + kfree_rcu(ht, rcu);
> return 0;
> }
> }
>
> - WARN_ON(1);
> return -ENOENT;
> }
>
> static void u32_destroy(struct tcf_proto *tp)
> {
> struct tc_u_common *tp_c = tp->data;
> - struct tc_u_hnode *root_ht = tp->root;
> + struct tc_u_hnode *root_ht = rtnl_dereference(tp->root);
>
> WARN_ON(root_ht == NULL);
>
> @@ -419,17 +446,16 @@ static void u32_destroy(struct tcf_proto *tp)
>
> tp->q->u32_node = NULL;
>
> - for (ht = tp_c->hlist; ht; ht = ht->next) {
> + for (ht = rtnl_dereference(tp_c->hlist);
> + ht;
> + ht = rtnl_dereference(ht->next)) {
> ht->refcnt--;
> - u32_clear_hnode(tp, ht);
> + u32_clear_hnode(ht);
> }
>
> - while ((ht = tp_c->hlist) != NULL) {
> - tp_c->hlist = ht->next;
> -
> - WARN_ON(ht->refcnt != 0);
> -
> - kfree(ht);
> + while ((ht = rtnl_dereference(tp_c->hlist)) != NULL) {
> + rcu_assign_pointer(tp_c->hlist, ht->next);
idem
> + kfree_rcu(ht, rcu);
> }
>
> kfree(tp_c);
> @@ -441,6 +467,7 @@ static void u32_destroy(struct tcf_proto *tp)
> static int u32_delete(struct tcf_proto *tp, unsigned long arg)
> {
> struct tc_u_hnode *ht = (struct tc_u_hnode *)arg;
> + struct tc_u_hnode *root_ht = rtnl_dereference(tp->root);
>
> if (ht == NULL)
> return 0;
> @@ -448,7 +475,7 @@ static int u32_delete(struct tcf_proto *tp, unsigned long arg)
> if (TC_U32_KEY(ht->handle))
> return u32_delete_key(tp, (struct tc_u_knode *)ht);
>
> - if (tp->root == ht)
> + if (root_ht == ht)
> return -EINVAL;
>
> if (ht->refcnt == 1) {
> @@ -471,7 +498,9 @@ static u32 gen_new_kid(struct tc_u_hnode *ht, u32 handle)
> if (!bitmap)
> return handle | 0xFFF;
>
> - for (n = ht->ht[TC_U32_HASH(handle)]; n; n = n->next)
> + for (n = rtnl_dereference(ht->ht[TC_U32_HASH(handle)]);
> + n;
> + n = rtnl_dereference(n->next))
> set_bit(TC_U32_NODE(n->handle), bitmap);
>
> i = find_next_zero_bit(bitmap, NR_U32_NODE, 0x800);
> @@ -521,10 +550,8 @@ static int u32_set_parms(struct net *net, struct tcf_proto *tp,
> ht_down->refcnt++;
> }
>
> - tcf_tree_lock(tp);
> - ht_old = n->ht_down;
> - n->ht_down = ht_down;
> - tcf_tree_unlock(tp);
> + ht_old = rtnl_dereference(n->ht_down);
> + rcu_assign_pointer(n->ht_down, ht_down);
>
> if (ht_old)
> ht_old->refcnt--;
> @@ -564,6 +591,9 @@ static int u32_change(struct net *net, struct sk_buff *in_skb,
> struct nlattr *tb[TCA_U32_MAX + 1];
> u32 htid;
> int err;
> +#ifdef CONFIG_CLS_U32_PERF
> + size_t size;
> +#endif
>
> if (opt == NULL)
> return handle ? -EINVAL : 0;
> @@ -601,8 +631,8 @@ static int u32_change(struct net *net, struct sk_buff *in_skb,
> ht->divisor = divisor;
> ht->handle = handle;
> ht->prio = tp->prio;
> - ht->next = tp_c->hlist;
> - tp_c->hlist = ht;
> + rcu_assign_pointer(ht->next, tp_c->hlist);
RCU_INIT_POINTER()
> + rcu_assign_pointer(tp_c->hlist, ht);
> *arg = (unsigned long)ht;
> return 0;
> }
> @@ -610,7 +640,7 @@ static int u32_change(struct net *net, struct sk_buff *in_skb,
> if (tb[TCA_U32_HASH]) {
> htid = nla_get_u32(tb[TCA_U32_HASH]);
> if (TC_U32_HTID(htid) == TC_U32_ROOT) {
> - ht = tp->root;
> + ht = rtnl_dereference(tp->root);
> htid = ht->handle;
> } else {
> ht = u32_lookup_ht(tp->data, TC_U32_HTID(htid));
> @@ -618,7 +648,7 @@ static int u32_change(struct net *net, struct sk_buff *in_skb,
> return -EINVAL;
> }
> } else {
> - ht = tp->root;
> + ht = rtnl_dereference(tp->root);
> htid = ht->handle;
> }
>
> @@ -642,8 +672,9 @@ static int u32_change(struct net *net, struct sk_buff *in_skb,
> return -ENOBUFS;
>
> #ifdef CONFIG_CLS_U32_PERF
> - n->pf = kzalloc(sizeof(struct tc_u32_pcnt) + s->nkeys*sizeof(u64), GFP_KERNEL);
> - if (n->pf == NULL) {
> + size = sizeof(struct tc_u32_pcnt) + s->nkeys * sizeof(u64);
> + n->pf = __alloc_percpu(size, __alignof__(struct tc_u32_pcnt));
> + if (!n->pf) {
> kfree(n);
> return -ENOBUFS;
> }
> @@ -654,34 +685,39 @@ static int u32_change(struct net *net, struct sk_buff *in_skb,
> n->handle = handle;
> n->fshift = s->hmask ? ffs(ntohl(s->hmask)) - 1 : 0;
> tcf_exts_init(&n->exts, TCA_U32_ACT, TCA_U32_POLICE);
> + n->tp = tp;
>
> #ifdef CONFIG_CLS_U32_MARK
> + n->pcpu_success = alloc_percpu(u32);
> +
> if (tb[TCA_U32_MARK]) {
> struct tc_u32_mark *mark;
>
> mark = nla_data(tb[TCA_U32_MARK]);
> - memcpy(&n->mark, mark, sizeof(struct tc_u32_mark));
> - n->mark.success = 0;
> + n->val = mark->val;
> + n->mask = mark->mask;
> }
> #endif
>
> err = u32_set_parms(net, tp, base, ht, n, tb, tca[TCA_RATE], ovr);
> if (err == 0) {
> - struct tc_u_knode **ins;
> - for (ins = &ht->ht[TC_U32_HASH(handle)]; *ins; ins = &(*ins)->next)
> - if (TC_U32_NODE(handle) < TC_U32_NODE((*ins)->handle))
> + struct tc_u_knode __rcu **ins;
> + struct tc_u_knode *pins;
> +
> + ins = &ht->ht[TC_U32_HASH(handle)];
> + for (pins = rtnl_dereference(*ins); pins;
> + ins = &pins->next, pins = rtnl_dereference(*ins))
> + if (TC_U32_NODE(handle) < TC_U32_NODE(pins->handle))
> break;
>
> - n->next = *ins;
> - tcf_tree_lock(tp);
> - *ins = n;
> - tcf_tree_unlock(tp);
> + rcu_assign_pointer(n->next, pins);
RCU_INIT_POINTER()
> + rcu_assign_pointer(*ins, n);
>
> *arg = (unsigned long)n;
> return 0;
> }
> #ifdef CONFIG_CLS_U32_PERF
> - kfree(n->pf);
> + free_percpu(n->pf);
> #endif
> kfree(n);
> return err;
> @@ -697,7 +733,9 @@ static void u32_walk(struct tcf_proto *tp, struct tcf_walker *arg)
> if (arg->stop)
> return;
>
> - for (ht = tp_c->hlist; ht; ht = ht->next) {
> + for (ht = rtnl_dereference(tp_c->hlist);
> + ht;
> + ht = rtnl_dereference(ht->next)) {
> if (ht->prio != tp->prio)
> continue;
> if (arg->count >= arg->skip) {
> @@ -708,7 +746,9 @@ static void u32_walk(struct tcf_proto *tp, struct tcf_walker *arg)
> }
> arg->count++;
> for (h = 0; h <= ht->divisor; h++) {
> - for (n = ht->ht[h]; n; n = n->next) {
> + for (n = rtnl_dereference(ht->ht[h]);
> + n;
> + n = rtnl_dereference(n->next)) {
> if (arg->count < arg->skip) {
> arg->count++;
> continue;
> @@ -727,6 +767,7 @@ static int u32_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
> struct sk_buff *skb, struct tcmsg *t)
> {
> struct tc_u_knode *n = (struct tc_u_knode *)fh;
> + struct tc_u_hnode *ht_up, *ht_down;
> struct nlattr *nest;
>
> if (n == NULL)
> @@ -745,11 +786,18 @@ static int u32_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
> if (nla_put_u32(skb, TCA_U32_DIVISOR, divisor))
> goto nla_put_failure;
> } else {
> +#ifdef CONFIG_CLS_U32_PERF
> + struct tc_u32_pcnt *gpf;
> +#endif
> + int cpu;
> +
> if (nla_put(skb, TCA_U32_SEL,
> sizeof(n->sel) + n->sel.nkeys*sizeof(struct tc_u32_key),
> &n->sel))
> goto nla_put_failure;
> - if (n->ht_up) {
> +
> + ht_up = rtnl_dereference(n->ht_up);
> + if (ht_up) {
> u32 htid = n->handle & 0xFFFFF000;
> if (nla_put_u32(skb, TCA_U32_HASH, htid))
> goto nla_put_failure;
> @@ -757,14 +805,27 @@ static int u32_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
> if (n->res.classid &&
> nla_put_u32(skb, TCA_U32_CLASSID, n->res.classid))
> goto nla_put_failure;
> - if (n->ht_down &&
> - nla_put_u32(skb, TCA_U32_LINK, n->ht_down->handle))
> +
> + ht_down = rtnl_dereference(n->ht_down);
> + if (ht_down &&
> + nla_put_u32(skb, TCA_U32_LINK, ht_down->handle))
> goto nla_put_failure;
>
> #ifdef CONFIG_CLS_U32_MARK
> - if ((n->mark.val || n->mark.mask) &&
> - nla_put(skb, TCA_U32_MARK, sizeof(n->mark), &n->mark))
> - goto nla_put_failure;
> + if ((n->val || n->mask)) {
> + struct tc_u32_mark mark = {.val = n->val,
> + .mask = n->mask,
> + .success = 0};
> +
> + for_each_possible_cpu(cpu) {
> + __u32 cnt = *per_cpu_ptr(n->pcpu_success, cpu);
> +
> + mark.success += cnt;
> + }
> +
> + if (nla_put(skb, TCA_U32_MARK, sizeof(mark), &mark))
> + goto nla_put_failure;
> + }
> #endif
>
> if (tcf_exts_dump(skb, &n->exts) < 0)
> @@ -779,10 +840,29 @@ static int u32_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
> }
> #endif
> #ifdef CONFIG_CLS_U32_PERF
> + gpf = kzalloc(sizeof(struct tc_u32_pcnt) +
> + n->sel.nkeys * sizeof(u64),
> + GFP_KERNEL);
> + if (!gpf)
> + goto nla_put_failure;
> +
> + for_each_possible_cpu(cpu) {
> + int i;
> + struct tc_u32_pcnt *pf = per_cpu_ptr(n->pf, cpu);
> +
> + gpf->rcnt += pf->rcnt;
> + gpf->rhit += pf->rhit;
> + for (i = 0; i < n->sel.nkeys; i++)
> + gpf->kcnts[i] += pf->kcnts[i];
> + }
> +
> if (nla_put(skb, TCA_U32_PCNT,
> sizeof(struct tc_u32_pcnt) + n->sel.nkeys*sizeof(u64),
> - n->pf))
> + gpf)) {
> + kfree(gpf);
> goto nla_put_failure;
> + }
> + kfree(gpf);
> #endif
> }
>
>
^ permalink raw reply
* [PATCH ipvs v2] ipvs: Add simple weighted failover scheduler
From: Kenny Mathis @ 2014-09-09 13:20 UTC (permalink / raw)
To: netdev; +Cc: Wensong Zhang, Simon Horman, Julian Anastasov
Please consider this patch for addition in 3.17
Add simple weighted IPVS failover support to the Linux kernel. All
other scheduling modules implement some form of load balancing, while
this offers a simple failover solution. Connections are directed to
the appropriate server based solely on highest weight value and server
availability. Tested functionality with keepalived.
Signed-off-by: Kenny Mathis <kmathis@chokepoint.net>
---
net/netfilter/ipvs/Kconfig | 10 ++++++
net/netfilter/ipvs/Makefile | 1 +
net/netfilter/ipvs/ip_vs_fo.c | 79 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 net/netfilter/ipvs/ip_vs_fo.c
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index 0c3b167..3b6929d 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -152,6 +152,16 @@ config IP_VS_WLC
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
+config IP_VS_FO
+ tristate "weighted failover scheduling"
+ ---help---
+ The weighted failover scheduling algorithm directs network
+ connections to the server with the highest weight that is
+ currently available.
+
+ If you want to compile it in kernel, say Y. To compile it as a
+ module, choose M here. If unsure, say N.
+
config IP_VS_LBLC
tristate "locality-based least-connection scheduling"
---help---
diff --git a/net/netfilter/ipvs/Makefile b/net/netfilter/ipvs/Makefile
index 34ee602..38b2723 100644
--- a/net/netfilter/ipvs/Makefile
+++ b/net/netfilter/ipvs/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_IP_VS_RR) += ip_vs_rr.o
obj-$(CONFIG_IP_VS_WRR) += ip_vs_wrr.o
obj-$(CONFIG_IP_VS_LC) += ip_vs_lc.o
obj-$(CONFIG_IP_VS_WLC) += ip_vs_wlc.o
+obj-$(CONFIG_IP_VS_FO) += ip_vs_fo.o
obj-$(CONFIG_IP_VS_LBLC) += ip_vs_lblc.o
obj-$(CONFIG_IP_VS_LBLCR) += ip_vs_lblcr.o
obj-$(CONFIG_IP_VS_DH) += ip_vs_dh.o
diff --git a/net/netfilter/ipvs/ip_vs_fo.c b/net/netfilter/ipvs/ip_vs_fo.c
new file mode 100644
index 0000000..6a2647d
--- /dev/null
+++ b/net/netfilter/ipvs/ip_vs_fo.c
@@ -0,0 +1,79 @@
+/*
+ * IPVS: Weighted Fail Over module
+ *
+ * Authors: Kenny Mathis <kmathis@chokepoint.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Changes:
+ * Kenny Mathis : added initial functionality based on weight
+ *
+ */
+
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <net/ip_vs.h>
+
+/* Weighted Fail Over Module */
+static struct ip_vs_dest *
+ip_vs_fo_schedule(struct ip_vs_service *svc, const struct sk_buff *skb,
+ struct ip_vs_iphdr *iph)
+{
+ struct ip_vs_dest *dest, *hweight = NULL;
+ int hw = 0; /* Track highest weight */
+
+ IP_VS_DBG(6, "ip_vs_fo_schedule(): Scheduling...\n");
+
+ /* Basic failover functionality
+ * Find virtual server with highest weight and send it traffic
+ */
+ list_for_each_entry_rcu(dest, &svc->destinations, n_list) {
+ if (!(dest->flags & IP_VS_DEST_F_OVERLOAD) &&
+ atomic_read(&dest->weight) > hw) {
+ hweight = dest;
+ hw = atomic_read(&dest->weight);
+ }
+ }
+
+ if (hweight) {
+ IP_VS_DBG_BUF(6, "FO: server %s:%u activeconns %d weight %d\n",
+ IP_VS_DBG_ADDR(svc->af, &hweight->addr),
+ ntohs(hweight->port),
+ atomic_read(&hweight->activeconns),
+ atomic_read(&hweight->weight));
+ return hweight;
+ }
+
+ ip_vs_scheduler_err(svc, "no destination available");
+ return NULL;
+}
+
+static struct ip_vs_scheduler ip_vs_fo_scheduler = {
+ .name = "fo",
+ .refcnt = ATOMIC_INIT(0),
+ .module = THIS_MODULE,
+ .n_list = LIST_HEAD_INIT(ip_vs_fo_scheduler.n_list),
+ .schedule = ip_vs_fo_schedule,
+};
+
+static int __init ip_vs_fo_init(void)
+{
+ return register_ip_vs_scheduler(&ip_vs_fo_scheduler);
+}
+
+static void __exit ip_vs_fo_cleanup(void)
+{
+ unregister_ip_vs_scheduler(&ip_vs_fo_scheduler);
+ synchronize_rcu();
+}
+
+module_init(ip_vs_fo_init);
+module_exit(ip_vs_fo_cleanup);
+MODULE_LICENSE("GPL");
--
1.7.9.5
^ permalink raw reply related
* Re: [net-next PATCH v3 10/15] net: sched: rcu'ify cls_rsvp
From: Eric Dumazet @ 2014-09-09 13:27 UTC (permalink / raw)
To: John Fastabend; +Cc: xiyou.wangcong, davem, jhs, netdev, paulmck, brouer
In-Reply-To: <20140909055844.2071.50705.stgit@nitbit.x32>
On Mon, 2014-09-08 at 22:58 -0700, John Fastabend wrote:
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> ---
> net/sched/cls_rsvp.h | 155 +++++++++++++++++++++++++++++---------------------
> 1 file changed, 89 insertions(+), 66 deletions(-)
>
> diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h
> index 1020e23..8a35bdc 100644
> --- a/net/sched/cls_rsvp.h
> +++ b/net/sched/cls_rsvp.h
> @@ -70,31 +70,34 @@ struct rsvp_head {
> u32 tmap[256/32];
> u32 hgenerator;
> u8 tgenerator;
> - struct rsvp_session *ht[256];
> + struct rsvp_session __rcu *ht[256];
> + struct rcu_head rcu;
> };
>
> struct rsvp_session {
> - struct rsvp_session *next;
> - __be32 dst[RSVP_DST_LEN];
> - struct tc_rsvp_gpi dpi;
> - u8 protocol;
> - u8 tunnelid;
> + struct rsvp_session __rcu *next;
> + __be32 dst[RSVP_DST_LEN];
> + struct tc_rsvp_gpi dpi;
> + u8 protocol;
> + u8 tunnelid;
> /* 16 (src,sport) hash slots, and one wildcard source slot */
> - struct rsvp_filter *ht[16 + 1];
> + struct rsvp_filter __rcu *ht[16 + 1];
> + struct rcu_head rcu;
> };
>
>
> struct rsvp_filter {
> - struct rsvp_filter *next;
> - __be32 src[RSVP_DST_LEN];
> - struct tc_rsvp_gpi spi;
> - u8 tunnelhdr;
> + struct rsvp_filter __rcu *next;
> + __be32 src[RSVP_DST_LEN];
> + struct tc_rsvp_gpi spi;
> + u8 tunnelhdr;
>
> - struct tcf_result res;
> - struct tcf_exts exts;
> + struct tcf_result res;
> + struct tcf_exts exts;
>
> - u32 handle;
> - struct rsvp_session *sess;
> + u32 handle;
> + struct rsvp_session *sess;
> + struct rcu_head rcu;
> };
>
> static inline unsigned int hash_dst(__be32 *dst, u8 protocol, u8 tunnelid)
> @@ -128,7 +131,7 @@ static inline unsigned int hash_src(__be32 *src)
> static int rsvp_classify(struct sk_buff *skb, const struct tcf_proto *tp,
> struct tcf_result *res)
> {
> - struct rsvp_session **sht = ((struct rsvp_head *)tp->root)->ht;
> + struct rsvp_head *head = rcu_dereference_bh(tp->root);
> struct rsvp_session *s;
> struct rsvp_filter *f;
> unsigned int h1, h2;
> @@ -169,7 +172,8 @@ restart:
> h1 = hash_dst(dst, protocol, tunnelid);
> h2 = hash_src(src);
>
> - for (s = sht[h1]; s; s = s->next) {
> + for (s = rcu_dereference_bh(head->ht[h1]); s;
> + s = rcu_dereference_bh(s->next)) {
> if (dst[RSVP_DST_LEN-1] == s->dst[RSVP_DST_LEN - 1] &&
> protocol == s->protocol &&
> !(s->dpi.mask &
> @@ -181,7 +185,8 @@ restart:
> #endif
> tunnelid == s->tunnelid) {
>
> - for (f = s->ht[h2]; f; f = f->next) {
> + for (f = rcu_dereference_bh(s->ht[h2]); f;
> + f = rcu_dereference_bh(f->next)) {
> if (src[RSVP_DST_LEN-1] == f->src[RSVP_DST_LEN - 1] &&
> !(f->spi.mask & (*(u32 *)(xprt + f->spi.offset) ^ f->spi.key))
> #if RSVP_DST_LEN == 4
> @@ -205,7 +210,8 @@ matched:
> }
>
> /* And wildcard bucket... */
> - for (f = s->ht[16]; f; f = f->next) {
> + for (f = rcu_dereference_bh(s->ht[16]); f;
> + f = rcu_dereference_bh(f->next)) {
> *res = f->res;
> RSVP_APPLY_RESULT();
> goto matched;
> @@ -218,7 +224,7 @@ matched:
>
> static unsigned long rsvp_get(struct tcf_proto *tp, u32 handle)
> {
> - struct rsvp_session **sht = ((struct rsvp_head *)tp->root)->ht;
> + struct rsvp_head *head = rtnl_dereference(tp->root);
> struct rsvp_session *s;
> struct rsvp_filter *f;
> unsigned int h1 = handle & 0xFF;
> @@ -227,8 +233,10 @@ static unsigned long rsvp_get(struct tcf_proto *tp, u32 handle)
> if (h2 > 16)
> return 0;
>
> - for (s = sht[h1]; s; s = s->next) {
> - for (f = s->ht[h2]; f; f = f->next) {
> + for (s = rtnl_dereference(head->ht[h1]); s;
> + s = rtnl_dereference(s->next)) {
> + for (f = rtnl_dereference(s->ht[h2]); f;
> + f = rtnl_dereference(f->next)) {
> if (f->handle == handle)
> return (unsigned long)f;
> }
> @@ -246,7 +254,7 @@ static int rsvp_init(struct tcf_proto *tp)
>
> data = kzalloc(sizeof(struct rsvp_head), GFP_KERNEL);
> if (data) {
> - tp->root = data;
> + rcu_assign_pointer(tp->root, data);
> return 0;
> }
> return -ENOBUFS;
> @@ -257,53 +265,55 @@ rsvp_delete_filter(struct tcf_proto *tp, struct rsvp_filter *f)
> {
> tcf_unbind_filter(tp, &f->res);
> tcf_exts_destroy(tp, &f->exts);
> - kfree(f);
> + kfree_rcu(f, rcu);
> }
>
> static void rsvp_destroy(struct tcf_proto *tp)
> {
> - struct rsvp_head *data = xchg(&tp->root, NULL);
> - struct rsvp_session **sht;
> + struct rsvp_head *data = rtnl_dereference(tp->root);
> int h1, h2;
>
> if (data == NULL)
> return;
>
> - sht = data->ht;
> + RCU_INIT_POINTER(tp->root, NULL);
>
> for (h1 = 0; h1 < 256; h1++) {
> struct rsvp_session *s;
>
> - while ((s = sht[h1]) != NULL) {
> - sht[h1] = s->next;
> + while ((s = rtnl_dereference(data->ht[h1])) != NULL) {
> + rcu_assign_pointer(data->ht[h1], s->next);
RCU_INIT_POINTER()
>
> for (h2 = 0; h2 <= 16; h2++) {
> struct rsvp_filter *f;
>
> - while ((f = s->ht[h2]) != NULL) {
> - s->ht[h2] = f->next;
> + while ((f = rtnl_dereference(s->ht[h2])) != NULL) {
> + rcu_assign_pointer(s->ht[h2], f->next);
> rsvp_delete_filter(tp, f);
> }
> }
> - kfree(s);
> + kfree_rcu(s, rcu);
> }
> }
> - kfree(data);
> + RCU_INIT_POINTER(tp->root, NULL);
> + kfree_rcu(data, rcu);
> }
>
> static int rsvp_delete(struct tcf_proto *tp, unsigned long arg)
> {
> - struct rsvp_filter **fp, *f = (struct rsvp_filter *)arg;
> + struct rsvp_head *head = rtnl_dereference(tp->root);
> + struct rsvp_filter *nfp, *f = (struct rsvp_filter *)arg;
> + struct rsvp_filter __rcu **fp;
> unsigned int h = f->handle;
> - struct rsvp_session **sp;
> - struct rsvp_session *s = f->sess;
> + struct rsvp_session __rcu **sp;
> + struct rsvp_session *nsp, *s = f->sess;
> int i;
>
> - for (fp = &s->ht[(h >> 8) & 0xFF]; *fp; fp = &(*fp)->next) {
> - if (*fp == f) {
> - tcf_tree_lock(tp);
> + fp = &s->ht[(h >> 8) & 0xFF];
> + for (nfp = rtnl_dereference(*fp); nfp;
> + fp = &nfp->next, nfp = rtnl_dereference(*fp)) {
> + if (nfp == f) {
> *fp = f->next;
> - tcf_tree_unlock(tp);
> rsvp_delete_filter(tp, f);
>
> /* Strip tree */
> @@ -313,14 +323,12 @@ static int rsvp_delete(struct tcf_proto *tp, unsigned long arg)
> return 0;
>
> /* OK, session has no flows */
> - for (sp = &((struct rsvp_head *)tp->root)->ht[h & 0xFF];
> - *sp; sp = &(*sp)->next) {
> - if (*sp == s) {
> - tcf_tree_lock(tp);
> + sp = &head->ht[h & 0xFF];
> + for (nsp = rtnl_dereference(*sp); nsp;
> + sp = &nsp->next, nsp = rtnl_dereference(*sp)) {
> + if (nsp == s) {
> *sp = s->next;
> - tcf_tree_unlock(tp);
> -
> - kfree(s);
> + kfree_rcu(s, rcu);
> return 0;
> }
> }
> @@ -333,7 +341,7 @@ static int rsvp_delete(struct tcf_proto *tp, unsigned long arg)
>
> static unsigned int gen_handle(struct tcf_proto *tp, unsigned salt)
> {
> - struct rsvp_head *data = tp->root;
> + struct rsvp_head *data = rtnl_dereference(tp->root);
> int i = 0xFFFF;
>
> while (i-- > 0) {
> @@ -361,7 +369,7 @@ static int tunnel_bts(struct rsvp_head *data)
>
> static void tunnel_recycle(struct rsvp_head *data)
> {
> - struct rsvp_session **sht = data->ht;
> + struct rsvp_session __rcu **sht = data->ht;
> u32 tmap[256/32];
> int h1, h2;
>
> @@ -369,11 +377,13 @@ static void tunnel_recycle(struct rsvp_head *data)
>
> for (h1 = 0; h1 < 256; h1++) {
> struct rsvp_session *s;
> - for (s = sht[h1]; s; s = s->next) {
> + for (s = rtnl_dereference(sht[h1]); s;
> + s = rtnl_dereference(s->next)) {
> for (h2 = 0; h2 <= 16; h2++) {
> struct rsvp_filter *f;
>
> - for (f = s->ht[h2]; f; f = f->next) {
> + for (f = rtnl_dereference(s->ht[h2]); f;
> + f = rtnl_dereference(f->next)) {
> if (f->tunnelhdr == 0)
> continue;
> data->tgenerator = f->res.classid;
> @@ -417,9 +427,11 @@ static int rsvp_change(struct net *net, struct sk_buff *in_skb,
> struct nlattr **tca,
> unsigned long *arg, bool ovr)
> {
> - struct rsvp_head *data = tp->root;
> - struct rsvp_filter *f, **fp;
> - struct rsvp_session *s, **sp;
> + struct rsvp_head *data = rtnl_dereference(tp->root);
> + struct rsvp_filter *f, *nfp;
> + struct rsvp_filter __rcu **fp;
> + struct rsvp_session *nsp, *s;
> + struct rsvp_session __rcu **sp;
> struct tc_rsvp_pinfo *pinfo = NULL;
> struct nlattr *opt = tca[TCA_OPTIONS];
> struct nlattr *tb[TCA_RSVP_MAX + 1];
> @@ -499,7 +511,9 @@ static int rsvp_change(struct net *net, struct sk_buff *in_skb,
> goto errout;
> }
>
> - for (sp = &data->ht[h1]; (s = *sp) != NULL; sp = &s->next) {
> + for (sp = &data->ht[h1];
> + (s = rtnl_dereference(*sp)) != NULL;
> + sp = &s->next) {
> if (dst[RSVP_DST_LEN-1] == s->dst[RSVP_DST_LEN-1] &&
> pinfo && pinfo->protocol == s->protocol &&
> memcmp(&pinfo->dpi, &s->dpi, sizeof(s->dpi)) == 0 &&
> @@ -521,12 +535,17 @@ insert:
>
> tcf_exts_change(tp, &f->exts, &e);
>
> - for (fp = &s->ht[h2]; *fp; fp = &(*fp)->next)
> - if (((*fp)->spi.mask & f->spi.mask) != f->spi.mask)
> + fp = &s->ht[h2];
> + for (nfp = rtnl_dereference(*fp); nfp;
> + fp = &nfp->next, nfp = rtnl_dereference(*fp)) {
> + __u32 mask = nfp->spi.mask & f->spi.mask;
> +
> + if (mask != f->spi.mask)
> break;
> - f->next = *fp;
> + }
> + rcu_assign_pointer(f->next, nfp);
RCU_INIT_POINTER()
> wmb();
Are you sure we need to keep this wmb() ? I dont think so.
> - *fp = f;
> + rcu_assign_pointer(*fp, f);
>
> *arg = (unsigned long)f;
> return 0;
> @@ -546,13 +565,15 @@ insert:
> s->protocol = pinfo->protocol;
> s->tunnelid = pinfo->tunnelid;
> }
> - for (sp = &data->ht[h1]; *sp; sp = &(*sp)->next) {
> - if (((*sp)->dpi.mask&s->dpi.mask) != s->dpi.mask)
> + sp = &data->ht[h1];
> + for (nsp = rtnl_dereference(*sp); nsp;
> + sp = &nsp->next, nsp = rtnl_dereference(*sp)) {
> + if ((nsp->dpi.mask & s->dpi.mask) != s->dpi.mask)
> break;
> }
> - s->next = *sp;
> + rcu_assign_pointer(s->next, nsp);
RCU_INIT_POINTER()
> wmb();
This wmb() can be removed.
> - *sp = s;
> + rcu_assign_pointer(*sp, s);
>
> goto insert;
>
> @@ -565,7 +586,7 @@ errout2:
>
> static void rsvp_walk(struct tcf_proto *tp, struct tcf_walker *arg)
> {
> - struct rsvp_head *head = tp->root;
> + struct rsvp_head *head = rtnl_dereference(tp->root);
> unsigned int h, h1;
>
> if (arg->stop)
> @@ -574,11 +595,13 @@ static void rsvp_walk(struct tcf_proto *tp, struct tcf_walker *arg)
> for (h = 0; h < 256; h++) {
> struct rsvp_session *s;
>
> - for (s = head->ht[h]; s; s = s->next) {
> + for (s = rtnl_dereference(head->ht[h]); s;
> + s = rtnl_dereference(s->next)) {
> for (h1 = 0; h1 <= 16; h1++) {
> struct rsvp_filter *f;
>
> - for (f = s->ht[h1]; f; f = f->next) {
> + for (f = rtnl_dereference(s->ht[h1]); f;
> + f = rtnl_dereference(f->next)) {
> if (arg->count < arg->skip) {
> arg->count++;
> continue;
>
Thanks !
^ permalink raw reply
* [PATCH] RxRPC: Fix missing __user annotation
From: David Howells @ 2014-09-09 14:19 UTC (permalink / raw)
To: netdev; +Cc: linux-afs, linux-kernel
Fix a missing __user annotation in a cast of a user space pointer (found by
checker).
Signed-off-by: David Howells <dhowells@redhat.com>
---
net/rxrpc/ar-key.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index b45d080e64a7..1b24191167f1 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -1143,7 +1143,7 @@ static long rxrpc_read(const struct key *key,
if (copy_to_user(xdr, (s), _l) != 0) \
goto fault; \
if (_l & 3 && \
- copy_to_user((u8 *)xdr + _l, &zero, 4 - (_l & 3)) != 0) \
+ copy_to_user((u8 __user *)xdr + _l, &zero, 4 - (_l & 3)) != 0) \
goto fault; \
xdr += (_l + 3) >> 2; \
} while(0)
^ permalink raw reply related
* [PATCH v2 0/3] net: can: Use syscon regmap for TI specific RAMINIT register
From: Roger Quadros @ 2014-09-09 14:31 UTC (permalink / raw)
To: wg, mkl
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar, nm,
sergei.shtylyov, linux-omap, linux-can, netdev, Roger Quadros
Hi,
Some hardware (TI am43xx) has a buggy RAMINIT DONE mechanism and it might
not always set the DONE bit. This will result in a lockup in c_can_hw_raminit_wait_ti(),
so patch 1 adds a timeout mechanism there.
There is a non compliancy within TI platforms with respect to the
layout of the RAMINIT register. The patches 2 and 3 address this issue
and make a flexible but standard way of defining the RAMINIT hardware register
layout in the device tree. The RAMINIT register is accessed using the syscon
regmap framework.
Patches available at
git@github.com:rogerq/linux.git [for-v3.18/can]
Changelog:
v2:
- added "ti" vendor prefix to TI specific raminit properties.
- split DTS changes into a separate series
cheers,
-roger
---
Roger Quadros (3):
can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout
net: can: c_can: Add syscon/regmap RAMINIT mechanism
net: can: c_can: Add support for START pulse in RAMINIT sequence
.../devicetree/bindings/net/can/c_can.txt | 10 ++
drivers/net/can/c_can/c_can.h | 12 +-
drivers/net/can/c_can/c_can_platform.c | 123 ++++++++++++++++-----
3 files changed, 114 insertions(+), 31 deletions(-)
--
1.8.3.2
^ permalink raw reply
* [PATCH v2 1/3] can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout
From: Roger Quadros @ 2014-09-09 14:31 UTC (permalink / raw)
To: wg, mkl
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar, nm,
sergei.shtylyov, linux-omap, linux-can, netdev, Roger Quadros
In-Reply-To: <1410273070-22485-1-git-send-email-rogerq@ti.com>
Pass the correct 'mask' and 'value' bits to c_can_hw_raminit_wait_ti().
They seem to have been swapped in the usage instances.
TI's RAMINIT DONE mechanism is buggy and may not always be
set after the START bit is set. So add a timeout mechanism to
c_can_hw_raminit_wait_ti().
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/net/can/c_can/c_can_platform.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 109cb44..b144e71 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -75,10 +75,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
u32 val)
{
+ int timeout = 0;
/* We look only at the bits of our instance. */
val &= mask;
- while ((readl(priv->raminit_ctrlreg) & mask) != val)
+ while ((readl(priv->raminit_ctrlreg) & mask) != val) {
udelay(1);
+ timeout++;
+
+ if (timeout == 1000) {
+ dev_err(&priv->dev->dev, "%s: time out\n", __func__);
+ break;
+ }
+ }
}
static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
@@ -97,14 +105,14 @@ static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
writel(ctrl, priv->raminit_ctrlreg);
ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
- c_can_hw_raminit_wait_ti(priv, ctrl, mask);
+ c_can_hw_raminit_wait_ti(priv, mask, ctrl);
if (enable) {
/* Set start bit and wait for the done bit. */
ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
writel(ctrl, priv->raminit_ctrlreg);
ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
- c_can_hw_raminit_wait_ti(priv, ctrl, mask);
+ c_can_hw_raminit_wait_ti(priv, mask, ctrl);
}
spin_unlock(&raminit_lock);
}
--
1.8.3.2
^ permalink raw reply related
* [PATCH v2 3/3] net: can: c_can: Add support for START pulse in RAMINIT sequence
From: Roger Quadros @ 2014-09-09 14:31 UTC (permalink / raw)
To: wg, mkl
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar, nm,
sergei.shtylyov, linux-omap, linux-can, netdev, Roger Quadros
In-Reply-To: <1410273070-22485-1-git-send-email-rogerq@ti.com>
Some SoCs e.g. (TI DRA7xx) need a START pulse to start the
RAMINIT sequence i.e. START bit must be set and cleared before
checking for the DONE bit status. Add a new DT property "raminit-pulse"
to specify if this mechanism must be used for RAMINIT.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/net/can/c_can.txt | 3 +++
drivers/net/can/c_can/c_can.h | 1 +
drivers/net/can/c_can/c_can_platform.c | 8 ++++++++
3 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
index e12d1a1..705411f 100644
--- a/Documentation/devicetree/bindings/net/can/c_can.txt
+++ b/Documentation/devicetree/bindings/net/can/c_can.txt
@@ -19,6 +19,9 @@ Optional properties:
register within the syscon region
- ti,raminit-start-bit : Bit posistion of START bit in the RAMINIT register
- ti,raminit-done-bit : Bit position of DONE bit in the RAMINIT register
+- ti,raminit-pulse : Property must exist if START pulse is needed for RAMINIT
+ sequence i.e. START bit will be set and cleared before
+ checking for DONE bit.
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index bf68822..85b5ad0 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -175,6 +175,7 @@ struct c_can_raminit {
unsigned int reg; /* register index within syscon */
u8 start_bit; /* START bit position in raminit reg. */
u8 done_bit; /* DONE bit position in raminit reg. */
+ bool needs_pulse; /* If set, sets and clears START bit (pulse) */
};
/* c_can private data structure */
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index fb0c35b..5ae9eb3 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -120,6 +120,12 @@ static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
ctrl |= 1 << raminit->start_bit;
regmap_write(raminit->syscon, raminit->reg, ctrl);
+ /* clear START bit if start pulse is needed */
+ if (raminit->needs_pulse) {
+ ctrl &= ~(1 << raminit->start_bit);
+ regmap_write(raminit->syscon, raminit->reg, ctrl);
+ }
+
ctrl |= 1 << raminit->done_bit;
c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
}
@@ -340,6 +346,8 @@ static int c_can_plat_probe(struct platform_device *pdev)
}
priv->raminit_sys.done_bit = val;
+ priv->raminit_sys.needs_pulse = of_property_read_bool(np,
+ "ti,raminit-pulse");
priv->raminit = c_can_hw_raminit_syscon;
break;
default:
--
1.8.3.2
^ permalink raw reply related
* [PATCH v2 2/3] net: can: c_can: Add syscon/regmap RAMINIT mechanism
From: Roger Quadros @ 2014-09-09 14:31 UTC (permalink / raw)
To: wg, mkl
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar, nm,
sergei.shtylyov, linux-omap, linux-can, netdev, Roger Quadros
In-Reply-To: <1410273070-22485-1-git-send-email-rogerq@ti.com>
Some TI SoCs like DRA7 have a RAMINIT register specification
different from the other AMxx SoCs and as expected by the
existing driver.
To add more insanity, this register is shared with other
IPs like DSS, PCIe and PWM.
Provides a more generic mechanism to specify the RAMINIT
register location and START/DONE bit position and use the
syscon/regmap framework to access the register.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
.../devicetree/bindings/net/can/c_can.txt | 7 ++
drivers/net/can/c_can/c_can.h | 11 ++-
drivers/net/can/c_can/c_can_platform.c | 109 +++++++++++++++------
3 files changed, 95 insertions(+), 32 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
index 8f1ae81..e12d1a1 100644
--- a/Documentation/devicetree/bindings/net/can/c_can.txt
+++ b/Documentation/devicetree/bindings/net/can/c_can.txt
@@ -13,6 +13,13 @@ Optional properties:
- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the
instance number
+- ti,raminit-syscon : Handle to system control region that contains the
+ RAMINIT register. If specified, the second memory resource
+ in the reg property must index into the RAMINIT
+ register within the syscon region
+- ti,raminit-start-bit : Bit posistion of START bit in the RAMINIT register
+- ti,raminit-done-bit : Bit position of DONE bit in the RAMINIT register
+
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
Future plan is to migrate hwmod data base contents into device tree
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 99ad1aa..bf68822 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -169,6 +169,14 @@ enum c_can_dev_id {
BOSCH_D_CAN,
};
+/* Out of band RAMINIT register access via syscon regmap */
+struct c_can_raminit {
+ struct regmap *syscon; /* for raminit ctrl. reg. access */
+ unsigned int reg; /* register index within syscon */
+ u8 start_bit; /* START bit position in raminit reg. */
+ u8 done_bit; /* DONE bit position in raminit reg. */
+};
+
/* c_can private data structure */
struct c_can_priv {
struct can_priv can; /* must be the first member */
@@ -186,8 +194,7 @@ struct c_can_priv {
const u16 *regs;
void *priv; /* for board-specific data */
enum c_can_dev_id type;
- u32 __iomem *raminit_ctrlreg;
- int instance;
+ struct c_can_raminit raminit_sys; /* RAMINIT via syscon regmap */
void (*raminit) (const struct c_can_priv *priv, bool enable);
u32 comm_rcv_high;
u32 rxmasked;
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index b144e71..fb0c35b 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -32,14 +32,13 @@
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/can/dev.h>
#include "c_can.h"
-#define CAN_RAMINIT_START_MASK(i) (0x001 << (i))
-#define CAN_RAMINIT_DONE_MASK(i) (0x100 << (i))
-#define CAN_RAMINIT_ALL_MASK(i) (0x101 << (i))
#define DCAN_RAM_INIT_BIT (1 << 3)
static DEFINE_SPINLOCK(raminit_lock);
/*
@@ -72,48 +71,59 @@ static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
writew(val, priv->base + 2 * priv->regs[index]);
}
-static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
- u32 val)
+static void c_can_hw_raminit_wait_syscon(const struct c_can_priv *priv,
+ u32 mask, u32 val)
{
int timeout = 0;
+ const struct c_can_raminit *raminit = &priv->raminit_sys;
+ u32 ctrl;
+
/* We look only at the bits of our instance. */
val &= mask;
- while ((readl(priv->raminit_ctrlreg) & mask) != val) {
+ do {
udelay(1);
timeout++;
+ regmap_read(raminit->syscon, raminit->reg, &ctrl);
if (timeout == 1000) {
dev_err(&priv->dev->dev, "%s: time out\n", __func__);
break;
}
- }
+ } while ((ctrl & mask) != val);
}
-static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
+static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
{
- u32 mask = CAN_RAMINIT_ALL_MASK(priv->instance);
+ u32 mask;
u32 ctrl;
+ const struct c_can_raminit *raminit = &priv->raminit_sys;
spin_lock(&raminit_lock);
- ctrl = readl(priv->raminit_ctrlreg);
+ mask = 1 << raminit->start_bit | 1 << raminit->done_bit;
+ regmap_read(raminit->syscon, raminit->reg, &ctrl);
+
/* We clear the done and start bit first. The start bit is
* looking at the 0 -> transition, but is not self clearing;
* And we clear the init done bit as well.
+ * NOTE: DONE must be written with 1 to clear it.
*/
- ctrl &= ~CAN_RAMINIT_START_MASK(priv->instance);
- ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
- writel(ctrl, priv->raminit_ctrlreg);
- ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
- c_can_hw_raminit_wait_ti(priv, mask, ctrl);
+ ctrl &= ~(1 << raminit->start_bit);
+ ctrl |= 1 << raminit->done_bit;
+ regmap_write(raminit->syscon, raminit->reg, ctrl);
+
+ ctrl &= ~(1 << raminit->done_bit);
+ c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
if (enable) {
/* Set start bit and wait for the done bit. */
- ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
- writel(ctrl, priv->raminit_ctrlreg);
- ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
- c_can_hw_raminit_wait_ti(priv, mask, ctrl);
+ ctrl |= 1 << raminit->start_bit;
+ regmap_write(raminit->syscon, raminit->reg, ctrl);
+
+ ctrl |= 1 << raminit->done_bit;
+ c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
}
+
spin_unlock(&raminit_lock);
}
@@ -202,6 +212,8 @@ static int c_can_plat_probe(struct platform_device *pdev)
struct resource *mem, *res;
int irq;
struct clk *clk;
+ struct device_node *np = pdev->dev.of_node;
+ u32 val;
if (pdev->dev.of_node) {
match = of_match_device(c_can_of_table, &pdev->dev);
@@ -271,11 +283,6 @@ static int c_can_plat_probe(struct platform_device *pdev)
priv->read_reg32 = d_can_plat_read_reg32;
priv->write_reg32 = d_can_plat_write_reg32;
- if (pdev->dev.of_node)
- priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
- else
- priv->instance = pdev->id;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
/* Not all D_CAN modules have a separate register for the D_CAN
* RAM initialization. Use default RAM init bit in D_CAN module
@@ -286,12 +293,54 @@ static int c_can_plat_probe(struct platform_device *pdev)
break;
}
- priv->raminit_ctrlreg = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!priv->raminit_ctrlreg || priv->instance < 0)
- dev_info(&pdev->dev, "control memory is not used for raminit\n");
- else
- priv->raminit = c_can_hw_raminit_ti;
+ /* If separate RAMINIT register is specified access
+ * it using syscon regmap. Mostly for TI platforms.
+ */
+ ret = -EINVAL;
+ if (!np) {
+ dev_err(&pdev->dev,
+ "separate RAMINIT reg. not supported on non DT\n");
+ goto exit_free_device;
+ }
+
+ priv->raminit_sys.syscon = syscon_regmap_lookup_by_phandle(np,
+ "ti,raminit-syscon");
+ if (IS_ERR(priv->raminit_sys.syscon)) {
+ dev_err(&pdev->dev,
+ "couldn't get syscon regmap for RAMINIT reg.\n");
+ goto exit_free_device;
+ }
+
+ priv->raminit_sys.reg = res->start;
+ if (of_property_read_u32(np, "ti,raminit-start-bit",
+ &val)) {
+ dev_err(&pdev->dev,
+ "missing ti,raminit-start-bit property\n");
+ goto exit_free_device;
+ }
+
+ if (val > 31) {
+ dev_err(&pdev->dev,
+ "invalid ti,raminit-start-bit property\n");
+ goto exit_free_device;
+ }
+
+ priv->raminit_sys.start_bit = val;
+ if (of_property_read_u32(np, "ti,raminit-done-bit",
+ &val)) {
+ dev_err(&pdev->dev,
+ "missing ti,raminit-done-bit property\n");
+ goto exit_free_device;
+ }
+
+ if (val > 31) {
+ dev_err(&pdev->dev,
+ "invalid ti,raminit-done-bit property\n");
+ goto exit_free_device;
+ }
+
+ priv->raminit_sys.done_bit = val;
+ priv->raminit = c_can_hw_raminit_syscon;
break;
default:
ret = -EINVAL;
--
1.8.3.2
^ permalink raw reply related
* Re: [PATCH v2 1/3] can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout
From: Marc Kleine-Budde @ 2014-09-09 14:34 UTC (permalink / raw)
To: Roger Quadros, wg
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar, nm,
sergei.shtylyov, linux-omap, linux-can, netdev
In-Reply-To: <1410273070-22485-2-git-send-email-rogerq@ti.com>
[-- Attachment #1: Type: text/plain, Size: 724 bytes --]
On 09/09/2014 04:31 PM, Roger Quadros wrote:
> Pass the correct 'mask' and 'value' bits to c_can_hw_raminit_wait_ti().
> They seem to have been swapped in the usage instances.
Can you split this fix into a seperate patch, please.
> TI's RAMINIT DONE mechanism is buggy and may not always be
> set after the START bit is set. So add a timeout mechanism to
> c_can_hw_raminit_wait_ti().
What should happen if the timeout occurs?
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply
* Re: [PATCH v2 1/3] can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout
From: Nishanth Menon @ 2014-09-09 14:34 UTC (permalink / raw)
To: Roger Quadros, wg, mkl
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar,
sergei.shtylyov, linux-omap, linux-can, netdev
In-Reply-To: <1410273070-22485-2-git-send-email-rogerq@ti.com>
On 09/09/2014 09:31 AM, Roger Quadros wrote:
> Pass the correct 'mask' and 'value' bits to c_can_hw_raminit_wait_ti().
> They seem to have been swapped in the usage instances.
>
> TI's RAMINIT DONE mechanism is buggy and may not always be
> set after the START bit is set. So add a timeout mechanism to
> c_can_hw_raminit_wait_ti().
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/net/can/c_can/c_can_platform.c | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
> index 109cb44..b144e71 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -75,10 +75,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
> static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
> u32 val)
> {
> + int timeout = 0;
> /* We look only at the bits of our instance. */
> val &= mask;
> - while ((readl(priv->raminit_ctrlreg) & mask) != val)
> + while ((readl(priv->raminit_ctrlreg) & mask) != val) {
> udelay(1);
> + timeout++;
> +
> + if (timeout == 1000) {
How did we come up with this number?
> + dev_err(&priv->dev->dev, "%s: time out\n", __func__);
> + break;
lets say we did timeout..
see below:
> + }
> + }
> }
>
> static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
> @@ -97,14 +105,14 @@ static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
> ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
> writel(ctrl, priv->raminit_ctrlreg);
> ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
> - c_can_hw_raminit_wait_ti(priv, ctrl, mask);
> + c_can_hw_raminit_wait_ti(priv, mask, ctrl);
>
> if (enable) {
> /* Set start bit and wait for the done bit. */
> ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
> writel(ctrl, priv->raminit_ctrlreg);
> ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
> - c_can_hw_raminit_wait_ti(priv, ctrl, mask);
> + c_can_hw_raminit_wait_ti(priv, mask, ctrl);
is it possible for us to continue? does it make sense for us to change
that void to a int and handle error cascading?
> }
> spin_unlock(&raminit_lock);
> }
>
--
Regards,
Nishanth Menon
^ permalink raw reply
* randconfig build error with next-20140909, in drivers/net/ethernet/broadcom/cnic.c
From: Jim Davis @ 2014-09-09 14:38 UTC (permalink / raw)
To: Stephen Rothwell, linux-next, linux-kernel, Anish Bhatt, mchan,
David S. Miller, netdev
[-- Attachment #1: Type: text/plain, Size: 203 bytes --]
Building with the attached random configuration file,
drivers/built-in.o: In function `cnic_get_v6_route':
cnic.c:(.text+0x3a4168): undefined reference to `ip6_route_output'
make: *** [vmlinux] Error 1
[-- Attachment #2: randconfig-1410248270.txt --]
[-- Type: text/plain, Size: 98600 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.17.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_LTO_MENU is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_CMDLINE_PARSER=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_XEN is not set
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
# CONFIG_ZSWAP is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=m
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ACPI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# CONFIG_IA32_EMULATION is not set
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_IOSF_MBI=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=m
# CONFIG_SYN_COOKIES is not set
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=m
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CONNTRACK_LABELS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
CONFIG_NFT_EXTHDR=m
# CONFIG_NFT_META is not set
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
# CONFIG_NFT_COMPAT is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=m
# CONFIG_IP_SET_BITMAP_PORT is not set
# CONFIG_IP_SET_HASH_IP is not set
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_AH_ESP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_LBLC is not set
CONFIG_IP_VS_LBLCR=m
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
# CONFIG_IP_VS_NQ is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
# CONFIG_IP_VS_NFCT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
# CONFIG_IP6_NF_MATCH_RT is not set
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_RAW is not set
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# CONFIG_NF_TABLES_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
# CONFIG_BRIDGE_EBT_MARK is not set
# CONFIG_BRIDGE_EBT_PKTTYPE is not set
# CONFIG_BRIDGE_EBT_STP is not set
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
# CONFIG_BRIDGE_EBT_MARK_T is not set
# CONFIG_BRIDGE_EBT_REDIRECT is not set
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
# CONFIG_ATM is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=y
CONFIG_LAPB=m
CONFIG_PHONET=m
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
CONFIG_HSR=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_CMTP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_WILINK is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_SIM=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_FENCE_TRACE=y
#
# Bus devices
#
CONFIG_CONNECTOR=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=m
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_BCH=m
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=m
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_SH_FLCTL=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_UBI is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
# CONFIG_PARIDE_PD is not set
# CONFIG_PARIDE_PCD is not set
# CONFIG_PARIDE_PF is not set
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
# CONFIG_PARIDE_BPCK is not set
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
# CONFIG_PARIDE_FIT2 is not set
CONFIG_PARIDE_FIT3=m
# CONFIG_PARIDE_EPAT is not set
CONFIG_PARIDE_EPIA=m
# CONFIG_PARIDE_FRIQ is not set
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
# CONFIG_PARIDE_KTTI is not set
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_NVME=m
CONFIG_BLK_DEV_SKD=y
# CONFIG_BLK_DEV_OSD is not set
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_AD525X_DPOT_SPI is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=m
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=y
CONFIG_DS1682=m
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
CONFIG_BMP085_SPI=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_SPI=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=y
#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=m
#
# Intel MIC Card Driver
#
# CONFIG_INTEL_MIC_CARD is not set
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
# CONFIG_IDE_GD is not set
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=m
# CONFIG_BLK_DEV_CMD64X is not set
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=m
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=m
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT3SAS_LOGGING is not set
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
# CONFIG_DM_CACHE_MQ is not set
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_RAID=m
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_SWITCH is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
# CONFIG_TCM_PSCSI is not set
# CONFIG_LOOPBACK_TARGET is not set
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
# CONFIG_I2O_CONFIG is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
# CONFIG_NET_CORE is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
#
# CAIF transport drivers
#
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=y
CONFIG_NET_XGENE=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
CONFIG_ALX=m
# CONFIG_NET_CADENCE is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=m
CONFIG_BNX2X=y
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=y
# CONFIG_CHELSIO_T4_DCB is not set
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_CX_ECAT=m
CONFIG_DNET=m
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=y
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_IP1000=m
CONFIG_JME=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
# CONFIG_SKY2 is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
# CONFIG_NET_VENDOR_MYRI is not set
CONFIG_FEALNX=m
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_SH_ETH=m
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=y
CONFIG_BCM7XXX_PHY=m
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MICREL_KS8995MA=m
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOE is not set
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=m
CONFIG_SLHC=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
# CONFIG_IEEE802154_FAKELB is not set
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
# CONFIG_IEEE802154_CC2520 is not set
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
# CONFIG_ISDN_X25 is not set
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#
CONFIG_ISDN_CAPI=y
# CONFIG_CAPI_TRACE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set
# CONFIG_ISDN_CAPI_CAPIDRV is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
CONFIG_MISDN=y
# CONFIG_MISDN_DSP is not set
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
# CONFIG_MISDN_HFCMULTI is not set
# CONFIG_MISDN_AVMFRITZ is not set
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
CONFIG_ISDN_HDLC=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_CYAPA=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
# CONFIG_INPUT_RETU_PWRBUTTON is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
# CONFIG_INPUT_WM831X_ON is not set
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK=m
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=y
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
CONFIG_N_GSM=m
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=m
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CLPS711X=m
CONFIG_SERIAL_MAX3100=m
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_MRST_MAX3110=m
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_IFX6X60=m
CONFIG_SERIAL_PCH_UART=m
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=m
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_MCTRL_GPIO=m
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
# CONFIG_NVRAM is not set
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_I2C_ATMEL=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EFM32 is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_RIIC=y
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_RCAR=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_STUB=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ATMEL=m
CONFIG_SPI_BCM2835=m
# CONFIG_SPI_BCM63XX_HSSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CLPS711X=y
CONFIG_SPI_EP93XX=m
CONFIG_SPI_GPIO=y
# CONFIG_SPI_IMX is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_FSL_DSPI is not set
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_TI_QSPI=m
# CONFIG_SPI_OMAP_100K is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_RSPI=m
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SH=m
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SUN4I=m
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_TXX9 is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
CONFIG_SPI_XTENSA_XTFPGA=m
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y
# CONFIG_SPI_DW_MMIO is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPMI=y
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
# CONFIG_GPIO_DA9052 is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_GENERIC_PLATFORM=m
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_SCH311X=m
# CONFIG_GPIO_TS5500 is not set
CONFIG_GPIO_SCH=m
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_LP3943=m
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_TC3589X is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=m
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
#
# PCI GPIO expanders:
#
CONFIG_GPIO_AMD8111=m
CONFIG_GPIO_INTEL_MID=y
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_GPIO_MC33880=y
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=m
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS65910=y
#
# USB GPIO expanders:
#
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27x00=y
# CONFIG_BATTERY_BQ27X00_I2C is not set
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MAX14577=y
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_SMB347=y
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=y
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_HTU21=y
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=y
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_RCAR_THERMAL=m
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_X86_PKG_TEMP_THERMAL is not set
CONFIG_INTEL_SOC_DTS_THERMAL=m
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DEBUG=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9063=y
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=m
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=m
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_IMG=y
# CONFIG_IR_IMG_RAW is not set
CONFIG_IR_IMG_HW=y
# CONFIG_IR_IMG_NEC is not set
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=m
# CONFIG_VIDEO_ZORAN_BUZ is not set
CONFIG_VIDEO_ZORAN_DC10=m
# CONFIG_VIDEO_ZORAN_LML33 is not set
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX18 is not set
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
# CONFIG_VIDEO_CX88_ENABLE_VP3054 is not set
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
# CONFIG_DVB_PLUTO2 is not set
CONFIG_DVB_DM1105=y
# CONFIG_DVB_PT1 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
# CONFIG_DVB_NGENE is not set
# CONFIG_DVB_DDBRIDGE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_MEDIA_PARPORT_SUPPORT=y
# CONFIG_VIDEO_BWQCAM is not set
CONFIG_VIDEO_CQCAM=m
# CONFIG_VIDEO_W9966 is not set
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=y
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=y
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
#
# Multistandard (cable + terrestrial) frontends
#
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=m
CONFIG_DVB_CX24116=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=y
CONFIG_DVB_TDA665x=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=y
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_PTN3460 is not set
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_UMS=y
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
#
# Frame buffer Devices
#
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_CLPS711X is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=m
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_RADEON=m
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=m
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_GOLDFISH=m
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=m
# CONFIG_FB_AUO_K1900 is not set
# CONFIG_FB_AUO_K1901 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
# CONFIG_LCD_ILI922X is not set
CONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=m
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
CONFIG_LCD_LD9040=m
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_CARILLO_RANCH is not set
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_VGASTATE=m
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_OSS is not set
#
# HID support
#
CONFIG_HID=m
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_UWB=m
# CONFIG_UWB_WHCI is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_OMAP_HS=m
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=y
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_ADP5520 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=m
CONFIG_INFINIBAND_CXGB3_DEBUG=y
# CONFIG_INFINIBAND_CXGB4 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_MLX5_INFINIBAND is not set
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_OCRDMA=m
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_DELL_LAPTOP=m
CONFIG_AMILO_RFKILL=m
CONFIG_SENSORS_HDAPS=y
CONFIG_IBM_RTL=y
CONFIG_XO1_RFKILL=m
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_CHROME_PLATFORMS is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
CONFIG_SH_TIMER_TMU=y
CONFIG_EM_TIMER_STI=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_SM5502=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_NTB=y
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPSS is not set
CONFIG_PWM_RENESAS_TPU=m
CONFIG_PWM_TWL=m
# CONFIG_PWM_TWL_LED is not set
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=m
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
# CONFIG_THUNDERBOLT is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
# CONFIG_GOOGLE_MEMCONSOLE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
# CONFIG_F2FS_FS_XATTR is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_ORE=m
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=m
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_MEMORY_NOTIFIER_ERROR_INJECT is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TORTURE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_TRACE=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_TEST_MODULE=m
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_STATIC_CPU_HAS=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA1_MB=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCP_DD is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QCE=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_CRC64_ECMA=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y
^ permalink raw reply
* Re: [PATCH v2 1/3] can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout
From: Roger Quadros @ 2014-09-09 14:39 UTC (permalink / raw)
To: Marc Kleine-Budde, wg
Cc: tony, tglx, mugunthanvnm, george.cherian, balbi, nsekhar, nm,
sergei.shtylyov, linux-omap, linux-can, netdev
In-Reply-To: <540F0FDD.60201@pengutronix.de>
On 09/09/2014 05:34 PM, Marc Kleine-Budde wrote:
> On 09/09/2014 04:31 PM, Roger Quadros wrote:
>> Pass the correct 'mask' and 'value' bits to c_can_hw_raminit_wait_ti().
>> They seem to have been swapped in the usage instances.
>
> Can you split this fix into a seperate patch, please.
OK.
>
>> TI's RAMINIT DONE mechanism is buggy and may not always be
>> set after the START bit is set. So add a timeout mechanism to
>> c_can_hw_raminit_wait_ti().
>
> What should happen if the timeout occurs?
I'm not sure yet. I will verify if the hardware still works or not in that case.
If it doesn't work then we should fail.
cheers,
-roger
^ permalink raw reply
* [PATCH v2 0/8] ARM: Berlin: Ethernet support
From: Antoine Tenart @ 2014-09-09 14:44 UTC (permalink / raw)
To: sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w
Cc: Antoine Tenart,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
zmxu-eYqpPyKDWXRBDgjK7y7TUQ, jszhang-eYqpPyKDWXRBDgjK7y7TUQ,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hi all,
This series introduce support for the Ethernet controller on Berlin SoCs,
using the existing pxa168 Ethernet driver. In order to do this, DT
support is added to the driver alongside some other modifications and
fixes.
Version 1 of this series was introducing a new Ethernet driver but thanks
to Sebastian's review it seems we can actually use the existing pxa168
Ethernet driver. This second version uses it.
This has been tested on a Berlin BG2Q DMP board.
Changes since v1:
- removed custom Berlin Ethernet driver
- used the pxa168 Ethernet driver instead
- made modifications to the pxa168 driver (DT support, fixes)
Antoine Tenart (8):
net: pxa168_eth: clean up
net: pxa168_eth: add device tree support
Documentation: bindings: net: add the Marvell PXA168 Ethernet
controller
net: pxa168_eth: fix Ethernet flow control status
net: pxa168_eth: get and set the mac address on the Ethernet
controller
net: pxa168_eth: allow Berlin SoCs to use the pxa168_eth driver
ARM: dts: berlin: add the Ethernet node
ARM: dts: berlin: enable the Ethernet port on the BG2Q DMP
.../devicetree/bindings/net/marvell-pxa168.txt | 22 +++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 4 +
arch/arm/boot/dts/berlin2q.dtsi | 9 +
drivers/net/ethernet/marvell/Kconfig | 2 +-
drivers/net/ethernet/marvell/pxa168_eth.c | 207 +++++++++++++--------
5 files changed, 165 insertions(+), 79 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/marvell-pxa168.txt
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox