* Re: Corrupt Network Packets -- 3.17-rc5/rc6
From: Cong Wang @ 2014-09-22 15:53 UTC (permalink / raw)
To: Pete Clements; +Cc: linux-kernel, Linux Kernel Network Developers
In-Reply-To: <201409221130.s8MBUQls003040@clem.clem-digital.net>
(Networking bug report needs to go netdev@)
On Mon, Sep 22, 2014 at 4:30 AM, Pete Clements
<clem@clem.clem-digital.net> wrote:
> Heads up fyi: system is i386 UP.
>
> Started getting some pop3 reception errors from the above system.
> Investigating the problem discovered scp of the mailbox failed
> with "Corrupted MAC on input"
>
> Problem started with rc5, still in rc6. Running rc4 with no
> problem.
>
> Sorry for lack of better definition.
Which driver are you using?
^ permalink raw reply
* Re: [PATCH] scsi: fix kconfig dependency warnings for SCSI_FC_ATTRS
From: David Miller @ 2014-09-22 15:56 UTC (permalink / raw)
To: hch; +Cc: rdunlap, netdev, linux-scsi, jbottomley, anish
In-Reply-To: <20140922144213.GA28200@infradead.org>
From: Christoph Hellwig <hch@infradead.org>
Date: Mon, 22 Sep 2014 07:42:13 -0700
> On Fri, Sep 19, 2014 at 04:50:59PM -0700, Randy Dunlap wrote:
>> --- linux-next-20140918.orig/drivers/scsi/qla2xxx/Kconfig
>> +++ linux-next-20140918/drivers/scsi/qla2xxx/Kconfig
>> @@ -30,7 +30,7 @@ config SCSI_QLA_FC
>>
>> config TCM_QLA2XXX
>> tristate "TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs"
>> - depends on SCSI_QLA_FC && TARGET_CORE
>> + depends on SCSI_QLA_FC && TARGET_CORE && SCSI_FC_ATTRS
>
> CONFIG_SCSI_QLA_FC currently selects SCSI_FC_ATTRS, so we shouldn't
> need this here. Also any reason not to switch that one over to a
> depends as well?
Christoph, I understand your confusion now, in the networking tree SCSI_QLA_FC
"depends" on SCSI_FC_ATTRS now, and this is what Randy's patches are against.
^ permalink raw reply
* Fw: [Bug 84881] New: [ASRock N68-VGS3 FX with onboard Gigabit LAN PHY RTL8211CL] Networking and ACPI conflicts
From: Stephen Hemminger @ 2014-09-22 16:00 UTC (permalink / raw)
To: netdev
Begin forwarded message:
Date: Sat, 20 Sep 2014 17:48:33 -0700
From: "bugzilla-daemon@bugzilla.kernel.org" <bugzilla-daemon@bugzilla.kernel.org>
To: "stephen@networkplumber.org" <stephen@networkplumber.org>
Subject: [Bug 84881] New: [ASRock N68-VGS3 FX with onboard Gigabit LAN PHY RTL8211CL] Networking and ACPI conflicts
https://bugzilla.kernel.org/show_bug.cgi?id=84881
Bug ID: 84881
Summary: [ASRock N68-VGS3 FX with onboard Gigabit LAN PHY
RTL8211CL] Networking and ACPI conflicts
Product: Networking
Version: 2.5
Kernel Version: Linux version 3.14-2-amd64
(debian-kernel@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2
(2014-08-09)
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: blocking
Priority: P1
Component: IPV4
Assignee: shemminger@linux-foundation.org
Reporter: valdir.marcos@ig.com.br
Regression: No
[ASRock N68-VGS3 FX with onboard Gigabit LAN PHY RTL8211CL] Networking and ACPI
conflicts
Information on the motherboard:
ASRock N68-VGS3 FX
http://www.asrock.com/mb/NVIDIA/N68-VGS3%20FX/?cat=Specifications
Information on the processor:
AMD FX-6300 Six-Core Processor
http://www.amd.com/pt-br/products/server/6000/6300
http://www.amd.com/en-gb/products/processors/desktop/fx
The problem occurs on both Debian 7 Wheezy (stable) and Debian 8 Jessie
(testing)
The Linux kernal seems to have an issue with my on-board networking adapter and
the ACPI of my computer. The boot log provides this bit of information:
[ 6.381529] ACPI Warning: SystemIO range
0x0000000000000700-0x000000000000073f conflicts with OpRegion
0x0000000000000700-0x000000000000073f (\_SB_.PCI0.SM00)
(20131218/utaddress-258)
[ 6.381533] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.388008] systemd-udevd[234]: renamed network interface eth1 to eth0
This bug results in two things:
My on-board networking doesn't work, and trying to restart or shutdown the
computer freezes the system.
To restart or shutdown the computer, I have to turn power off.
The 2 or 3 workarounds proposed below do not work on neither Debian 7 nor on
Debian 8:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1003297
This bug is similar on Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1003297
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1264509
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1281930
-----------------------------------------------
Detailed extra information:
-----------------------------------------------
# uname -a
Linux thor 3.14-2-amd64 #1 SMP Debian 3.14.15-2 (2014-08-09) x86_64 GNU/Linux
-----------------------------------------------
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14-2-amd64
root=UUID=07ef08e5-8088-4019-8619-e882508f454b ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cdf9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cdfa0000-0x00000000cdfaffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cdfb0000-0x00000000cdfdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cdfe0000-0x00000000cdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68-VGS3 FX,
BIOS P1.70 10/31/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 base 0000C8000000 mask FFFFFC000000 write-back
[ 0.000000] 4 base 0000CC000000 mask FFFFFE000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xce000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcdfa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at
[ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
[ 0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
[ 0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[ 0.000000] [mem 0x22ee00000-0x22effffff] page 2M
[ 0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22edfffff]
[ 0.000000] [mem 0x22c000000-0x22edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcdf9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcddfffff] page 2M
[ 0.000000] [mem 0xcde00000-0xcdf9ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3660a000-0x372fcfff]
[ 0.000000] ACPI: RSDP 00000000000f9e10 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cdfa0000 000040 (v01 103112 RSDT1459 20121031
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cdfa0200 000084 (v01 A_M_I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cdfa0470 004CAE (v01 AS572 AS572161 00000161
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cdfb0000 000040
[ 0.000000] ACPI: APIC 00000000cdfa0390 0000A0 (v01 103112 APIC1459 20121031
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cdfa0430 00003C (v01 103112 OEMMCFG 20121031
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cdfb0040 000072 (v01 103112 OEMB1459 20121031
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000cdfaa470 000027 (v01 103112 OEMAAFT 20121031
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cdfaa4a0 000038 (v01 103112 OEMHPET0 20121031
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cdfaa4e0 001158 (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff]
[ 0.000000] NODE_DATA [mem 0x22eff9000-0x22effdfff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880226600000-ffff88022d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcdf9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x22effffff]
[ 0.000000] On node 0 totalpages: 2084670
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11479 pages used for memmap
[ 0.000000] DMA32 zone: 839584 pages, LIFO batch:31
[ 0.000000] Normal zone: 16968 pages used for memmap
[ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x16] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 22, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdfa0000-0xcdfaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdfb0000-0xcdfdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdfe0000-0xcdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xce000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022ec00000 s86080 r8192
d24512 u262144
[ 0.000000] pcpu-alloc: s86080 r8192 d24512 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2056146
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.14-2-amd64
root=UUID=07ef08e5-8088-4019-8619-e882508f454b ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 8064844K/8338680K available (4957K kernel code, 747K
rwdata, 1724K rodata, 1008K init, 960K bss, 273836K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3515.938 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer
frequency.. 7031.87 BogoMIPS (lpj=14063752)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20131218
[ 0.001800] ACPI: All ACPI Tables successfully acquired
[ 0.002298] Security Framework initialized
[ 0.002309] AppArmor: AppArmor disabled by boot time parameter
[ 0.002310] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002806] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.004941] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.005882] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005893] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.006092] Initializing cgroup subsys memory
[ 0.006097] Initializing cgroup subsys devices
[ 0.006099] Initializing cgroup subsys freezer
[ 0.006100] Initializing cgroup subsys net_cls
[ 0.006101] Initializing cgroup subsys blkio
[ 0.006103] Initializing cgroup subsys perf_event
[ 0.006124] tseg: 0000000000
[ 0.006129] CPU: Physical Processor ID: 0
[ 0.006130] CPU: Processor Core ID: 0
[ 0.006132] mce: CPU supports 7 MCE banks
[ 0.006138] LVT offset 1 assigned for vector 0xf9
[ 0.006143] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.006143] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.006143] tlb_flushall_shift: 6
[ 0.006202] Freeing SMP alternatives memory: 20K (ffffffff819b8000 -
ffffffff819bd000)
[ 0.007505] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047157] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15,
model: 02, stepping: 00)
[ 0.153033] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.153037] ... version: 0
[ 0.153038] ... bit width: 48
[ 0.153039] ... generic registers: 6
[ 0.153040] ... value mask: 0000ffffffffffff
[ 0.153041] ... max period: 00007fffffffffff
[ 0.153042] ... fixed-purpose events: 0
[ 0.153042] ... event mask: 000000000000003f
[ 0.153487] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.153562] x86: Booting SMP configuration:
[ 0.153564] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.219530] x86: Booted up 1 node, 6 CPUs
[ 0.219533] smpboot: Total of 6 processors activated (42191.25 BogoMIPS)
[ 0.227426] devtmpfs: initialized
[ 0.230691] PM: Registering ACPI NVS region [mem 0xcdfb0000-0xcdfdffff]
(196608 bytes)
[ 0.230841] pinctrl core: initialized pinctrl subsystem
[ 0.230901] NET: Registered protocol family 16
[ 0.230983] cpuidle: using governor ladder
[ 0.230985] cpuidle: using governor menu
[ 0.231023] ACPI: bus type PCI registered
[ 0.231025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.231111] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem
0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.231114] PCI: not using MMCONFIG
[ 0.231115] PCI: Using configuration type 1 for base access
[ 0.231115] PCI: Using configuration type 1 for extended access
[ 0.231395] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.231396] mtrr: probably your BIOS does not setup all CPUs.
[ 0.231396] mtrr: corrected configuration.
[ 0.232096] bio: create slab <bio-0> at 0
[ 0.232249] ACPI: Added _OSI(Module Device)
[ 0.232251] ACPI: Added _OSI(Processor Device)
[ 0.232252] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.232253] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.233515] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.235488] ACPI: Interpreter enabled
[ 0.235495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20131218/hwxface-580)
[ 0.235506] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.235507] ACPI: Using IOAPIC for interrupt routing
[ 0.235522] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem
0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.236301] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI
motherboard resources
[ 0.236456] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.236536] ACPI: No dock devices found.
[ 0.242804] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.242809] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.243005] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug
PCIeCapability]
[ 0.243102] acpi PNP0A03:00: _OSC: not requesting control; platform does not
support [PCIeCapability]
[ 0.243105] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER
PCIeCapability]
[ 0.243107] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[ 0.243108] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.243229] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus
00-7f] only partially covers this bridge
[ 0.243331] PCI host bridge to bus 0000:00
[ 0.243333] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.243335] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.243337] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.243338] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.243340] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.243342] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
[ 0.243343] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
[ 0.243363] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[ 0.243571] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[ 0.243578] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
[ 0.243651] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.243662] pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
[ 0.243677] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
[ 0.243682] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
[ 0.243710] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.243736] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.243770] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.243840] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.243849] pci 0000:00:02.0: reg 0x10: [mem 0xefeff000-0xefefffff]
[ 0.243883] pci 0000:00:02.0: supports D1 D2
[ 0.243884] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243906] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.243944] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.243954] pci 0000:00:02.1: reg 0x10: [mem 0xefefec00-0xefefecff]
[ 0.243995] pci 0000:00:02.1: supports D1 D2
[ 0.243996] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244019] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.244061] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.244110] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.244146] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.244156] pci 0000:00:05.0: reg 0x10: [mem 0xefef8000-0xefefbfff]
[ 0.244198] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.244221] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.244263] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.244284] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.244351] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[ 0.244361] pci 0000:00:07.0: reg 0x10: [mem 0xefefd000-0xefefdfff]
[ 0.244365] pci 0000:00:07.0: reg 0x14: [io 0xd080-0xd087]
[ 0.244399] pci 0000:00:07.0: supports D1 D2
[ 0.244400] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244424] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.244459] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.244467] pci 0000:00:08.0: reg 0x10: [io 0xd000-0xd007]
[ 0.244471] pci 0000:00:08.0: reg 0x14: [io 0xcc00-0xcc03]
[ 0.244475] pci 0000:00:08.0: reg 0x18: [io 0xc880-0xc887]
[ 0.244479] pci 0000:00:08.0: reg 0x1c: [io 0xc800-0xc803]
[ 0.244482] pci 0000:00:08.0: reg 0x20: [io 0xc480-0xc48f]
[ 0.244486] pci 0000:00:08.0: reg 0x24: [mem 0xefefc000-0xefefcfff]
[ 0.244550] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.244558] pci 0000:00:08.1: reg 0x10: [io 0xc400-0xc407]
[ 0.244562] pci 0000:00:08.1: reg 0x14: [io 0xc080-0xc083]
[ 0.244566] pci 0000:00:08.1: reg 0x18: [io 0xc000-0xc007]
[ 0.244569] pci 0000:00:08.1: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.244573] pci 0000:00:08.1: reg 0x20: [io 0xb880-0xb88f]
[ 0.244577] pci 0000:00:08.1: reg 0x24: [mem 0xefef7000-0xefef7fff]
[ 0.244647] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.244674] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244698] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.244734] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.244760] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244783] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.244818] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.244844] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244866] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.244900] pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
[ 0.244906] pci 0000:00:0d.0: reg 0x10: [mem 0xee000000-0xeeffffff]
[ 0.244912] pci 0000:00:0d.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.244916] pci 0000:00:0d.0: reg 0x1c: [mem 0xed000000-0xedffffff 64bit]
[ 0.244922] pci 0000:00:0d.0: reg 0x30: [mem 0xefec0000-0xefedffff pref]
[ 0.244988] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.245041] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.245090] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.245139] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.245192] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.245241] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.245344] pci 0000:01:0a.0: [1106:3106] type 00 class 0x020000
[ 0.245357] pci 0000:01:0a.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.245364] pci 0000:01:0a.0: reg 0x14: [mem 0xeffffc00-0xeffffcff]
[ 0.245414] pci 0000:01:0a.0: supports D1 D2
[ 0.245415] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245470] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.245473] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.245475] pci 0000:00:04.0: bridge window [mem 0xeff00000-0xefffffff]
[ 0.245478] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.245480] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.245481] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.245483] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
[ 0.245485] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xefffffff]
(subtractive decode)
[ 0.245486] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfebfffff]
(subtractive decode)
[ 0.245526] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.245567] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.245602] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.246058] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.246142] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.246227] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.246308] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.246389] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.246471] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.246551] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.246631] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.246714] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.246796] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.246877] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[ 0.246958] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.247040] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[ 0.247121] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.247202] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.247284] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.247365] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.247479] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.247518] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.247593] vgaarb: device added:
PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.247595] vgaarb: loaded
[ 0.247596] vgaarb: bridge control possible 0000:00:0d.0
[ 0.247632] PCI: Using ACPI for IRQ routing
[ 0.250804] PCI: pci_cache_line_size set to 64 bytes
[ 0.250834] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.250836] e820: reserve RAM buffer [mem 0xcdfa0000-0xcfffffff]
[ 0.250837] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[ 0.250933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.250936] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.252988] Switched to clocksource hpet
[ 0.254879] pnp: PnP ACPI init
[ 0.254890] ACPI: bus type PNP registered
[ 0.254921] pnp 00:00: [dma 4]
[ 0.254942] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.254965] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.254997] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.255326] pnp 00:03: [dma 3]
[ 0.255415] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.255773] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.255775] system 00:04: [io 0x0500-0x057f] could not be reserved
[ 0.255778] system 00:04: [io 0x0580-0x05ff] has been reserved
[ 0.255780] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.255781] system 00:04: [io 0x0880-0x08ff] has been reserved
[ 0.255783] system 00:04: [io 0x0d00-0x0d7f] has been reserved
[ 0.255785] system 00:04: [io 0x0d80-0x0dff] has been reserved
[ 0.255786] system 00:04: [io 0x1100-0x117f] has been reserved
[ 0.255788] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.255790] system 00:04: [mem 0x000d0000-0x000d3fff window] has been
reserved
[ 0.255792] system 00:04: [mem 0x000d4000-0x000d7fff window] has been
reserved
[ 0.255794] system 00:04: [mem 0x000de000-0x000dffff window] has been
reserved
[ 0.255797] system 00:04: [mem 0xfec80000-0xfecfffff] has been reserved
[ 0.255799] system 00:04: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.255800] system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.255802] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.255804] system 00:04: [mem 0xffb80000-0xffffffff] could not be reserved
[ 0.255806] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255931] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.256016] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.256019] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.256021] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256215] pnp 00:07: [dma 0 disabled]
[ 0.256258] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.256358] system 00:08: [io 0x0280-0x028f] has been reserved
[ 0.256360] system 00:08: [io 0x0290-0x029f] has been reserved
[ 0.256362] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256420] system 00:09: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.256422] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256602] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.256605] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.256607] system 00:0a: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.256608] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.256610] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.256813] pnp: PnP ACPI: found 11 devices
[ 0.256814] ACPI: bus type PNP unregistered
[ 0.263332] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.263335] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.263338] pci 0000:00:04.0: bridge window [mem 0xeff00000-0xefffffff]
[ 0.263343] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.263347] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.263351] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.263355] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.263357] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.263358] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.263360] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.263361] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff]
[ 0.263363] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.263364] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.263365] pci_bus 0000:01: resource 1 [mem 0xeff00000-0xefffffff]
[ 0.263367] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.263368] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.263369] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.263371] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.263372] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff]
[ 0.263373] pci_bus 0000:01: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.263458] NET: Registered protocol family 2
[ 0.263665] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.263842] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.264028] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.264052] TCP: reno registered
[ 0.264064] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.264099] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.264206] NET: Registered protocol family 1
[ 0.264422] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.341168] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.341271] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341318] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341375] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341430] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341486] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341546] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341610] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341678] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.341683] pci 0000:00:0d.0: Boot video device
[ 0.341695] PCI: CLS 64 bytes, default 64
[ 0.341734] Unpacking initramfs...
[ 0.554755] Freeing initrd memory: 13260K (ffff88003660a000 -
ffff8800372fd000)
[ 0.554961] PCI-DMA: Disabling AGP.
[ 0.555036] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.555037] PCI-DMA: using GART IOMMU.
[ 0.555040] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.559236] perf: AMD NB counters detected
[ 0.559292] microcode: CPU0: patch_level=0x00000000
[ 0.559300] microcode: CPU1: patch_level=0x00000000
[ 0.559304] microcode: CPU2: patch_level=0x00000000
[ 0.559310] microcode: CPU3: patch_level=0x00000000
[ 0.559319] microcode: CPU4: patch_level=0x00000000
[ 0.559328] microcode: CPU5: patch_level=0x00000000
[ 0.559406] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.559409] LVT offset 0 assigned for vector 0x400
[ 0.559434] perf: AMD IBS detected (0x000000ff)
[ 0.559739] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.559807] audit: initializing netlink subsys (disabled)
[ 0.559827] audit: type=2000 audit(1411258066.452:1): initialized
[ 0.569698] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.569913] VFS: Disk quotas dquot_6.5.2
[ 0.569936] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.569988] msgmni has been set to 15906
[ 0.570236] alg: No test for stdrng (krng)
[ 0.570263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.570315] io scheduler noop registered
[ 0.570316] io scheduler deadline registered
[ 0.570341] io scheduler cfq registered (default)
[ 0.570418] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.570463] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.570503] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.570557] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.570571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.570624] GHES: HEST is not enabled!
[ 0.570671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.590995] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 0.591296] Linux agpgart interface v0.103
[ 0.591376] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.593841] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.593846] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.593978] mousedev: PS/2 mouse device common for all mice
[ 0.594026] rtc_cmos 00:05: RTC can wake from S4
[ 0.594181] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.594220] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram,
hpet irqs
[ 0.594227] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.594228] AMD IOMMUv2 functionality not available on this system
[ 0.594322] TCP: cubic registered
[ 0.594395] NET: Registered protocol family 10
[ 0.594602] mip6: Mobile IPv6
[ 0.594604] NET: Registered protocol family 17
[ 0.594606] mpls_gso: MPLS GSO support
[ 0.595097] registered taskstats version 1
[ 0.595437] rtc_cmos 00:05: setting system clock to 2014-09-21 00:07:47 UTC
(1411258067)
[ 0.595473] PM: Hibernation image not present or could not be loaded.
[ 0.596121] Freeing unused kernel memory: 1008K (ffffffff818bc000 -
ffffffff819b8000)
[ 0.596122] Write protecting the kernel read-only data: 8192k
[ 0.598242] Freeing unused kernel memory: 1176K (ffff8800014da000 -
ffff880001600000)
[ 0.598815] Freeing unused kernel memory: 324K (ffff8800017af000 -
ffff880001800000)
[ 0.606895] systemd-udevd[80]: starting version 208
[ 0.607155] random: systemd-udevd urandom read with 3 bits of entropy
available
[ 0.618539] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 0.618778] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 0.624139] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.64.
[ 0.624208] SCSI subsystem initialized
[ 0.624269] via-rhine 0000:01:0a.0 eth0: VIA Rhine III at 0x1e800,
34:08:04:9f:c2:35, IRQ 19
[ 0.624396] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 0.624760] ACPI: bus type USB registered
[ 0.624791] usbcore: registered new interface driver usbfs
[ 0.624808] usbcore: registered new interface driver hub
[ 0.625079] via-rhine 0000:01:0a.0 eth0: MII PHY found at address 1, status
0x786d advertising 05e1 Link 45e1
[ 0.625156] usbcore: registered new device driver usb
[ 0.625548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.625702] ehci-pci: EHCI PCI platform driver
[ 0.625732] libata version 3.00 loaded.
[ 0.626424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.689681] forcedeth 0000:00:07.0: ifname eth1, PHY OUI 0x732 @ 3, addr
bc:5f:f4:b3:91:39
[ 0.689685] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi
desc-v3
[ 0.689816] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.689823] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 0.689833] ehci-pci 0000:00:02.1: debug port 1
[ 0.689858] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.689878] ehci-pci 0000:00:02.1: irq 22, io mem 0xefefec00
[ 0.700636] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.700757] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.700760] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.700762] usb usb1: Product: EHCI Host Controller
[ 0.700764] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[ 0.700765] usb usb1: SerialNumber: 0000:00:02.1
[ 0.700894] hub 1-0:1.0: USB hub found
[ 0.700910] hub 1-0:1.0: 10 ports detected
[ 0.701225] sata_nv 0000:00:08.0: version 3.5
[ 0.701426] ohci-pci: OHCI PCI platform driver
[ 0.701435] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 0.701777] scsi0 : sata_nv
[ 0.701930] scsi1 : sata_nv
[ 0.701980] ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq
20
[ 0.701983] ata2: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq
20
[ 0.702148] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 0.702482] scsi2 : sata_nv
[ 0.702601] scsi3 : sata_nv
[ 0.702652] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq
23
[ 0.702654] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq
23
[ 0.702686] pata_amd 0000:00:06.0: version 0.4.1
[ 0.703392] scsi4 : pata_amd
[ 0.703510] scsi5 : pata_amd
[ 0.703554] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.703556] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.703706] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.703711] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus
number 2
[ 0.703727] ohci-pci 0000:00:02.0: irq 23, io mem 0xefeff000
[ 0.758619] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.758621] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.758623] usb usb2: Product: OHCI PCI host controller
[ 0.758624] usb usb2: Manufacturer: Linux 3.14-2-amd64 ohci_hcd
[ 0.758625] usb usb2: SerialNumber: 0000:00:02.0
[ 0.758733] hub 2-0:1.0: USB hub found
[ 0.758739] hub 2-0:1.0: 10 ports detected
[ 1.026684] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.026686] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.260187] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.474016] usb 2-2: New USB device found, idVendor=0e8f, idProduct=0022
[ 1.474018] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.474020] usb 2-2: Product: USB KB V11
[ 1.474021] usb 2-2: Manufacturer: GASIA
[ 1.480733] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.492015] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.494148] usbcore: registered new interface driver usbhid
[ 1.494150] usbhid: USB HID core driver
[ 1.494662] input: GASIA USB KB V11 as
/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:0E8F:0022.0001/input/input2
[ 1.494710] hid-generic 0003:0E8F:0022.0001: input,hidraw0: USB HID v1.10
Keyboard [GASIA USB KB V11] on usb-0000:00:02.0-2/input0
[ 1.499067] input: GASIA USB KB V11 as
/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/0003:0E8F:0022.0002/input/input3
[ 1.499121] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10
Device [GASIA USB KB V11] on usb-0000:00:02.0-2/input1
[ 1.500240] ata2.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
[ 1.500243] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.508227] ata2.00: configured for UDMA/133
[ 1.508338] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4B
PQ: 0 ANSI: 5
[ 1.555928] tsc: Refined TSC clocksource calibration: 3515.989 MHz
[ 1.975605] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.983768] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
[ 1.999754] ata4.00: configured for UDMA/100
[ 2.003411] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01
PQ: 0 ANSI: 5
[ 2.003611] ata6: port disabled--ignoring
[ 2.005777] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 2.005780] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 2.005872] sd 1:0:0:0: [sda] Write Protect is off
[ 2.005874] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.005908] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.014432] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 2.014434] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.014560] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.015045] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.015097] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.071105] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 2.071731] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.555164] Switched to clocksource tsc
[ 3.634227] floppy0: no floppy controllers found
[ 3.689561] PM: Starting manual resume from disk
[ 3.689565] PM: Hibernation image partition 8:3 present
[ 3.689566] PM: Looking for hibernation image.
[ 3.689847] PM: Image not found (code -22)
[ 3.689850] PM: Hibernation image not present or could not be loaded.
[ 3.718034] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.146473] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP
+AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 4.231970] systemd[1]: Inserted module 'autofs4'
[ 4.243294] systemd[1]: Set hostname to <thor>.
[ 4.327306] random: nonblocking pool is initialized
[ 4.667357] systemd[1]: Cannot add dependency job for unit
display-manager.service, ignoring: Unit display-manager.service failed to load:
No such file or directory.
[ 4.667576] systemd[1]: Starting Syslog Socket.
[ 4.667605] systemd[1]: Listening on Syslog Socket.
[ 4.667614] systemd[1]: Starting Forward Password Requests to Wall Directory
Watch.
[ 4.667651] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 4.667659] systemd[1]: Starting Remote File Systems (Pre).
[ 4.667666] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.667673] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.667687] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.667694] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.667707] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.667717] systemd[1]: Starting Dispatch Password Requests to Console
Directory Watch.
[ 4.667738] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 4.667758] systemd[1]: Starting Arbitrary Executable File Formats File
System Automount Point.
[ 4.667817] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 4.667825] systemd[1]: Starting Journal Socket.
[ 4.667853] systemd[1]: Listening on Journal Socket.
[ 4.667907] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 4.668315] systemd[1]: Mounting Debug File System...
[ 4.668589] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.669688] systemd[1]: Starting Load Kernel Modules...
[ 4.669961] systemd[1]: Mounting Huge Pages File System...
[ 4.670239] systemd[1]: Starting Syslog.
[ 4.670248] systemd[1]: Reached target Syslog.
[ 4.670265] systemd[1]: Starting Journal Service...
[ 4.670578] systemd[1]: Started Journal Service.
[ 5.138147] lp: driver loaded but no devices found
[ 5.150522] ppdev: user-space parallel port driver
[ 5.151196] parport_pc 00:03: reported by Plug and Play ACPI
[ 5.151247] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.244967] lp0: using parport0 (interrupt-driven).
[ 5.302644] systemd-udevd[197]: starting version 208
[ 6.063998] ACPI: acpi_idle registered with cpuidle
[ 6.070384] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.131452] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 6.131459] ACPI: Power Button [PWRB]
[ 6.131541] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.131545] ACPI: Power Button [PWRF]
[ 6.203500] EDAC MC: Ver: 3.0.0
[ 6.262857] fam15h_power 0000:00:18.4: Bogus value for ProcessorPwrWatts
(processor_pwr_watts>=16127)
[ 6.364156] systemd-udevd[247]: renamed network interface eth0 to rename2
[ 6.365920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.377131] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.379937] MCE: In-kernel MCE decoding enabled.
[ 6.381525] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 6.381529] ACPI Warning: SystemIO range
0x0000000000000700-0x000000000000073f conflicts with OpRegion
0x0000000000000700-0x000000000000073f (\_SB_.PCI0.SM00)
(20131218/utaddress-258)
[ 6.381533] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.388008] systemd-udevd[234]: renamed network interface eth1 to eth0
[ 6.397821] AMD64 EDAC driver v3.4.0
[ 6.397849] EDAC amd64: DRAM ECC disabled.
[ 6.397858] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 6.397858] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 6.397858] (Note that use of the override may cause unknown side effects.)
[ 6.430658] systemd-udevd[247]: renamed network interface rename2 to eth1
[ 6.433164] [drm] Initialized drm 1.1.0 20060810
[ 6.495678] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 6.495691] hda_intel: Disabling MSI
[ 6.853742] AVX version of gcm_enc/dec engaged.
[ 6.857000] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.908643] wmi: Mapper loaded
[ 6.976010] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[ 6.976250] [drm] hdmi device not found 0 13 1
[ 6.976287] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 6.976292] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 6.976295] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 6.976344] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 7.017946] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 7.017951] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 7.018269] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 7.018274] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.28.01
[ 7.018545] nouveau 0000:00:0d.0: irq 43 for MSI/MSI-X
[ 7.018551] nouveau [ PMC][0000:00:0d.0] MSI interrupts enabled
[ 7.018566] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 7.018568] nouveau [ PFB][0000:00:0d.0] RAM size: 32 MiB
[ 7.018569] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 7.019242] alg: No test for crc32 (crc32-pclmul)
[ 7.045985] nouveau [ PTHERM][0000:00:0d.0] FAN control: none / external
[ 7.045991] nouveau [ PTHERM][0000:00:0d.0] fan management: automatic
[ 7.045993] nouveau [ PTHERM][0000:00:0d.0] internal sensor: no
[ 7.065833] nouveau [ CLK][0000:00:0d.0] 20: core 425 MHz shader 425
MHz
[ 7.065842] nouveau [ CLK][0000:00:0d.0] --:
[ 7.065989] [TTM] Zone kernel: Available graphics memory: 4073292 kiB
[ 7.065990] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 7.065991] [TTM] Initializing pool allocator
[ 7.065995] [TTM] Initializing DMA pool allocator
[ 7.066004] nouveau [ DRM] VRAM: 29 MiB
[ 7.066005] nouveau [ DRM] GART: 512 MiB
[ 7.066008] nouveau [ DRM] TMDS table version 1.1
[ 7.066009] nouveau [ DRM] DCB version 3.0
[ 7.066011] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 7.066012] nouveau [ DRM] DCB outp 01: 00110204 942b0003
[ 7.066014] nouveau [ DRM] DCB conn 00: 0000
[ 7.066015] nouveau [ DRM] DCB conn 01: 1131
[ 7.066017] nouveau [ DRM] DCB conn 02: 0110
[ 7.066018] nouveau [ DRM] DCB conn 03: 0111
[ 7.066019] nouveau [ DRM] DCB conn 04: 0113
[ 7.066135] nouveau [ DRM] Saving VGA fonts
[ 7.105721] nouveau W[ DRM] DCB type 4 not known
[ 7.105724] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 7.106846] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.106848] [drm] Driver supports precise vblank timestamp query.
[ 7.108855] nouveau [ DRM] MM: using M2MF for buffer copies
[ 7.138360] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo
ffff8802257fbc00
[ 7.138426] fbcon: nouveaufb (fb0) is primary device
[ 7.153197] kvm: Nested Virtualization enabled
[ 7.153200] kvm: Nested Paging enabled
[ 7.193869] Adding 3906556k swap on /dev/sda3. Priority:-1 extents:1
across:3906556k
[ 7.194365] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.216782] Console: switching to colour frame buffer device 180x56
[ 7.217978] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 7.217979] nouveau 0000:00:0d.0: registered panic notifier
[ 7.217984] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:0d.0 on
minor 0
[ 7.818972] input: HDA NVidia Line Out as
/devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.819238] input: HDA NVidia Line as
/devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 7.819407] input: HDA NVidia Rear Mic as
/devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 7.890730] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.118655] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.287875] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.366032] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.393838] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.673671] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.682786] systemd-journald[178]: Received request to flush runtime journal
from PID 1
[ 8.784873] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[ 8.784915] forcedeth 0000:00:07.0 eth0: MSI enabled
[ 8.785137] forcedeth 0000:00:07.0 eth0: no link during initialization
[ 8.785631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.213656] floppy0: no floppy controllers found
[ 9.754037] RPC: Registered named UNIX socket transport module.
[ 9.754040] RPC: Registered udp transport module.
[ 9.754041] RPC: Registered tcp transport module.
[ 9.754042] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.776340] FS-Cache: Loaded
[ 9.791475] FS-Cache: Netfs 'nfs' registered for caching
[ 9.821742] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
-----------------------------------------------
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply
* Fw: [Bug 84951] New: 8021q: kernel doesn't take into account ethernet header bytes for received packets
From: Stephen Hemminger @ 2014-09-22 16:01 UTC (permalink / raw)
To: netdev
I am inclined to think this is something that is just an incorrect
user expectation.
Begin forwarded message:
Date: Sun, 21 Sep 2014 11:47:22 -0700
From: "bugzilla-daemon@bugzilla.kernel.org" <bugzilla-daemon@bugzilla.kernel.org>
To: "stephen@networkplumber.org" <stephen@networkplumber.org>
Subject: [Bug 84951] New: 8021q: kernel doesn't take into account ethernet header bytes for received packets
https://bugzilla.kernel.org/show_bug.cgi?id=84951
Bug ID: 84951
Summary: 8021q: kernel doesn't take into account ethernet
header bytes for received packets
Product: Networking
Version: 2.5
Kernel Version: 3.16.1
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
Assignee: shemminger@linux-foundation.org
Reporter: g.djavadyan@gmail.com
Regression: No
Statistics exported by the kernel for received packets on 802.1q subinterfaces
don't consider Ethernet header bytes (dst MAC, src MAC, type). Statistics for
transmitted packets is not affected. The problem is more prominent on
high-speed links (>100Mb/s), as networking tools (nload, iftop, ...) display
lower bandwidth utilization (>5Mb/s difference) than a report from neighboring
routing device (FreeBSD, Cisco). Also, someone monitoring Linux router
interfaces will find that the router generates more information than it
receives.
Tested on CentOS kernel 2.6.32-431.29.2.el6.x86_64 and vanilla 3.16.1 with
drivers: bnx2, atl1c and igb.
How to reproduce:
1. Create dot1q subinterfaces on two boxes (vconfig add eth0 4040).
2. Assign IP addresses to subinterfaces.
3. Check the connection using ping.
4. Check the output from ifconfig eth0.4040 or 'cat
/sys/class/net/eth0.4040/statistics/rx_{packets,bytes}'.
5. Issue standard 56 byte payload ping using 'ping -c 1 neighboring_ip'.
6. Recheck statistics using step 4.
Expected results:
Received packets value should increase by 1 and received bytes value should
increase by 98.
dst MAC - 6
src MAC - 6
ethertype - 2
IP header - 20
ICMP header - 8
ICMP Payload - 56
Total: 98 bytes.
Actual results:
Received packets value increases by 1 and received bytes value increases by 84
bytes.
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply
* Fw: [Bug 84991] New: Adding a gre tunnel causes a kernel panic
From: Stephen Hemminger @ 2014-09-22 16:02 UTC (permalink / raw)
To: netdev
Not good, and user did bisection.
using git bisect, the below commit introduced the above bug.
[7d442fab0a6777fd7612cfcada32ea859553d370] ipv4: Cache dst in tunnels
commit 7d442fab0a6777fd7612cfcada32ea859553d370
Author: Tom Herbert <therbert@google.com>
Date: Thu Jan 2 11:48:26 2014 -0800
ipv4: Cache dst in tunnels
Avoid doing a route lookup on every packet being tunneled.
In ip_tunnel.c cache the route returned from ip_route_output if
the tunnel is "connected" so that all the rouitng parameters are
taken from tunnel parms for a packet. Specifically, not NBMA tunnel
and tos is from tunnel parms (not inner packet).
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Begin forwarded message:
Date: Sun, 21 Sep 2014 16:56:08 -0700
From: "bugzilla-daemon@bugzilla.kernel.org" <bugzilla-daemon@bugzilla.kernel.org>
To: "stephen@networkplumber.org" <stephen@networkplumber.org>
Subject: [Bug 84991] New: Adding a gre tunnel causes a kernel panic
https://bugzilla.kernel.org/show_bug.cgi?id=84991
Bug ID: 84991
Summary: Adding a gre tunnel causes a kernel panic
Product: Networking
Version: 2.5
Kernel Version: 3.17.0-rc5 #82 SMP PREEMPT
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: IPV4
Assignee: shemminger@linux-foundation.org
Reporter: joe9mail@gmail.com
Regression: No
command:
sudo ip tunnel add mastergrevpn mode gre local 192.168.1.232 remote
192.168.0.11 ttl 255
192.168.0.11 is connected over an ipsec connection.
extract from kern.log
Sep 22 05:04:45 br kernel: [ 23.550046] r8169 0000:03:00.0 enp3s0: link up
Sep 22 05:04:46 br kernel: [ 24.811978] NET: Registered protocol family 10
Sep 22 05:05:55 br kernel: [ 94.471313] NET: Registered protocol family 15
Sep 22 05:05:55 br kernel: [ 94.502502] Initializing XFRM netlink socket
Sep 22 05:05:55 br kernel: [ 94.550294] gre: GRE over IPv4 demultiplexor
driver
Sep 22 05:05:55 br kernel: [ 94.550682] ip_gre: GRE over IPv4 tunneling
driver
Sep 22 05:05:55 br kernel: [ 94.608310] BUG: using smp_processor_id() in
preemptible [00000000] code: ip/2261
Sep 22 05:05:55 br kernel: [ 94.608316] caller is
tunnel_dst_set.isra.28+0x20/0x60 [ip_tunnel]
Sep 22 05:05:55 br kernel: [ 94.608319] CPU: 3 PID: 2261 Comm: ip Not tainted
3.17.0-rc5 #82
Sep 22 05:05:55 br kernel: [ 94.608321] Hardware name: System manufacturer
System Product Name/F2A85-M, BIOS 5202 01/22/2013
Sep 22 05:05:55 br kernel: [ 94.608323] 0000000000000000 ffffffff816b4926
ffffffff8155f634 0000000000000003
Sep 22 05:05:55 br kernel: [ 94.608326] ffffffff8128e1e1 ffffffff817a3b80
ffffffff816ac8e9 00000000000199b8
Sep 22 05:05:55 br kernel: [ 94.608329] ffff88013922e6c0 00000000e801a8c0
ffffffffa05a1f40 ffff880093237000
Sep 22 05:05:55 br kernel: [ 94.608331] Call Trace:
Sep 22 05:05:55 br kernel: [ 94.608339] [<ffffffff8155f634>] ?
dump_stack+0x4a/0x75
Sep 22 05:05:55 br kernel: [ 94.608343] [<ffffffff8128e1e1>] ?
check_preemption_disabled+0xf1/0x100
Sep 22 05:05:55 br kernel: [ 94.608346] [<ffffffffa05a1f40>] ?
tunnel_dst_set.isra.28+0x20/0x60 [ip_tunnel]
Sep 22 05:05:55 br kernel: [ 94.608349] [<ffffffffa05a209e>] ?
ip_tunnel_bind_dev+0x11e/0x190 [ip_tunnel]
Sep 22 05:05:55 br kernel: [ 94.608352] [<ffffffffa05a332b>] ?
ip_tunnel_ioctl+0x25b/0x360 [ip_tunnel]
Sep 22 05:05:55 br kernel: [ 94.608357] [<ffffffffa05ac5fb>] ?
ipgre_tunnel_ioctl+0x16b/0x270 [ip_gre]
Sep 22 05:05:55 br kernel: [ 94.608361] [<ffffffff814dd562>] ?
dev_ifsioc+0x352/0x390
Sep 22 05:05:55 br kernel: [ 94.608363] [<ffffffff814dd726>] ?
dev_ioctl+0xc6/0x530
Sep 22 05:05:55 br kernel: [ 94.608366] [<ffffffff814af7a2>] ?
sock_ioctl+0xd2/0x260
Sep 22 05:05:55 br kernel: [ 94.608370] [<ffffffff811174ae>] ?
do_vfs_ioctl+0x7e/0x510
Sep 22 05:05:55 br kernel: [ 94.608373] [<ffffffff8110839f>] ?
alloc_file+0x1f/0xc0
Sep 22 05:05:55 br kernel: [ 94.608376] [<ffffffff81061339>] ?
get_parent_ip+0x9/0x20
Sep 22 05:05:55 br kernel: [ 94.608378] [<ffffffff81061397>] ?
preempt_count_add+0x47/0x90
Sep 22 05:05:55 br kernel: [ 94.608382] [<ffffffff815645ae>] ?
_raw_spin_lock+0xe/0x30
Sep 22 05:05:55 br kernel: [ 94.608385] [<ffffffff811220ad>] ?
__fd_install+0x2d/0x70
Sep 22 05:05:55 br kernel: [ 94.608387] [<ffffffff81117987>] ?
SyS_ioctl+0x47/0xa0
Sep 22 05:05:55 br kernel: [ 94.608390] [<ffffffff81566462>] ?
page_fault+0x22/0x30
Sep 22 05:05:55 br kernel: [ 94.608392] [<ffffffff81564e56>] ?
system_call_fastpath+0x1a/0x1f
uname -a
Linux br 3.17.0-rc5 #82 SMP PREEMPT Mon Sep 22 05:01:36 IST 2014 x86_64 AMD
A10-5800K APU with Radeon(tm) HD Graphics AuthenticAMD GNU/Linux
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001116
cpu MHz : 3800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 16
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni
pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c
lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core
perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold bmi1
bugs : fxsave_leak
bogomips : 7641.38
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 1
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001116
cpu MHz : 3800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 17
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni
pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c
lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core
perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold bmi1
bugs : fxsave_leak
bogomips : 7641.38
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 2
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001116
cpu MHz : 3800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 18
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni
pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c
lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core
perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold bmi1
bugs : fxsave_leak
bogomips : 7641.38
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 3
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-5800K APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001116
cpu MHz : 3800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 2
apicid : 19
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni
pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c
lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core
perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold bmi1
bugs : fxsave_leak
bogomips : 7641.38
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
Please let me know if you need more details.
Thanks
Joe
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply
* Fw: [Bug 84961] New: Kernel crash at __xfrm_state_lookup
From: Stephen Hemminger @ 2014-09-22 16:03 UTC (permalink / raw)
To: netdev
Begin forwarded message:
Date: Sun, 21 Sep 2014 12:13:05 -0700
From: "bugzilla-daemon@bugzilla.kernel.org" <bugzilla-daemon@bugzilla.kernel.org>
To: "stephen@networkplumber.org" <stephen@networkplumber.org>
Subject: [Bug 84961] New: Kernel crash at __xfrm_state_lookup
https://bugzilla.kernel.org/show_bug.cgi?id=84961
Bug ID: 84961
Summary: Kernel crash at __xfrm_state_lookup
Product: Networking
Version: 2.5
Kernel Version: 3.14.13
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
Assignee: shemminger@linux-foundation.org
Reporter: jiri.horky@gmail.com
Regression: No
Hi,
we have a rather specific setup of 102hosts (cluster1) having p2p IPsec tunnels
to 102 hosts to cluster2, so each host from cluster1 is connected to each host
in cluster2. We use strongswan-5.2.0-2 with configuration as follows:
# cat /etc/strongswan/ipsec.conf
config setup
uniqueids=no
conn %default
ikelifetime=180m
keylife=90m
rekeymargin=5m
keyingtries=%forever
keyexchange=ikev2
mobike=no
reauth=no
dpdaction=restart
closeaction=restart
include /etc/strongswan/ipsec.d/*.conf
One of the connection file looks like this:
conn tch017
left=5.45.X.Y
right=5.45.Z.W
authby=secret
type=transport
auto=route
On each of the hosts, we run periodical ping to all hosts on the other
side of the tunnels so we keep the tunnels up.
e experience relatively frequent kernel crash (~2 a day out of 102
nodes). I enclose a stack trace:
[17243.492008] general protection fault: 0000 [#1] SMP
[17243.492038] Modules linked in: nfsv3 nfs_acl ipmi_si vfat fat
usb_storage mpt3sas mpt2sas scsi_transport_sas raid_class mptctl mptbase
ipmi_devintf dell_rbu authenc xfrm4_mode_transport cbc xfrm4_tunnel
tunnel4 ipcomp xfrm_ipcomp esp4 ah4 af_key rpcsec_gss_krb5 auth_rpcgss
nfsv4 nfs fscache lockd sunrpc cls_u32 sch_prio 8021q garp stp llc
bonding xt_comment iptable_filter iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_DSCP iptable_mangle xt_CT xt_set
iptable_raw ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6
xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ip_set_hash_net
ip_set nfnetlink fuse dm_mirror dm_region_hash dm_log dm_mod gpio_ich
iTCO_wdt iTCO_vendor_support dcdbas microcode pcspkr sb_edac edac_core
mgag200 ttm drm_kms_helper sysimgblt sysfillrect syscopyarea
[17243.492370] ipmi_msghandler acpi_pad lpc_ich shpchp joydev sg tg3
ptp pps_core wmi acpi_power_meter hwmon ext4 jbd2 mbcache sd_mod
crc_t10dif crct10dif_common megaraid_sas [last unloaded: ipmi_si]
[17243.492449] CPU: 12 PID: 16085 Comm: charon Not tainted
3.14.13.ffdebug2 #8
[17243.492473] Hardware name: Dell Inc. PowerEdge R720xd/0X3D66, BIOS
2.2.2 01/16/2014
[17243.492499] task: ffff883fe0948e30 ti: ffff883fdd728000 task.ti:
ffff883fdd728000
[17243.492525] RIP: 0010:[<ffffffff81601b18>] [<ffffffff81601b18>]
__xfrm_state_lookup+0x78/0x100
[17243.492559] RSP: 0018:ffff883fdd7299f0 EFLAGS: 00010202
[17243.492577] RAX: 0060000000000804 RBX: 000000000000012e RCX:
0000000017cd52c6
[17243.492605] RDX: ffff880063f05810 RSI: 0000000000000000 RDI:
ffff880a2552c028
[17243.492629] RBP: ffff883fdd7299f8 R08: 0000000000000032 R09:
0000000000000002
[17243.492654] R10: ffff880a2552c000 R11: 000000000007ffff R12:
ffffffff81d0ef40
[17243.492678] R13: 0000000000000000 R14: ffff880063f05810 R15:
0000000017cd52c6
[17243.492702] FS: 00007f4e61c89700(0000) GS:ffff88207fac0000(0000)
knlGS:0000000000000000
[17243.492729] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[17243.492748] CR2: ffffffffff600400 CR3: 0000003fdf1c8000 CR4:
00000000001407e0
[17243.492772] Stack:
[17243.492780] ffffffff81d0ff80 ffff883fdd729a48 ffffffff81601c06
ffff880900000002
[17243.492812] ffff883fdd729a32 ffff883f87759bc0 ffff883fdd729a94
ffff881e520368c0
[17243.492842] ffffffff81d0ef40 ffff880063f05800 ffff883fdd729c60
ffff883fdd729a78
[17243.492872] Call Trace:
[17243.492885] [<ffffffff81601c06>] xfrm_state_lookup+0x66/0x90
[17243.492907] [<ffffffff8160796e>] xfrm_user_state_lookup+0x6e/0xe0
[17243.492930] [<ffffffff81255078>] ? security_capable+0x18/0x20
[17243.492952] [<ffffffff81608912>] xfrm_get_sa+0x42/0xc0
[17243.492971] [<ffffffff816078db>] xfrm_user_rcv_msg+0x12b/0x150
[17243.493919] [<ffffffff816077b0>] ? attach_auth+0xf0/0xf0
[17243.495228] [<ffffffff815979ec>] netlink_rcv_skb+0x6c/0xd0
[17243.496520] [<ffffffff81606e6f>] xfrm_netlink_rcv+0x3f/0x60
[17243.497813] [<ffffffff8159779f>] netlink_unicast+0x12f/0x1e0
[17243.499162] [<ffffffff815989b8>] netlink_sendmsg+0x348/0x3a0
[17243.500436] [<ffffffff81551670>] sock_sendmsg+0x90/0xc0
[17243.501685] [<ffffffff810def29>] ? futex_wait+0x1b9/0x290
[17243.502945] [<ffffffff8154ee49>] ? copy_from_user+0x9/0x10
[17243.504203] [<ffffffff815517a4>] SYSC_sendto+0x104/0x140
[17243.505466] [<ffffffff811bdc73>] ? __sb_end_write+0x33/0x70
[17243.506713] [<ffffffff815517ee>] SyS_sendto+0xe/0x10
[17243.507951] [<ffffffff8163c8e9>] system_call_fastpath+0x16/0x1b
[17243.509368] Code: 14 41 31 da 41 31 c2 48 8b 87 20 0d 00 00 45 21 da
4a 8b 3c d0 31 c0 4c 8d 57 d8 48 85 ff 49 0f 45 c2 eb 74 0f 1f 80 00 00
00 00 <66> 44 39 88 c2 00 00 00 75 56 39 48 50 75 51 44 38 40 54 75 4b
[17243.512127] RIP [<ffffffff81601b18>] __xfrm_state_lookup+0x78/0x100
[17243.513445] RSP <ffff883fdd7299f0>
The objdump of the function:
00000000000030f0 <__xfrm_state_lookup>:
__xfrm_state_lookup():
.....
3144: 48 8b 87 20 0d 00 00 mov 0xd20(%rdi),%rax
314b: 45 21 da and %r11d,%r10d
314e: 4a 8b 3c d0 mov (%rax,%r10,8),%rdi
3152: 31 c0 xor %eax,%eax
3154: 4c 8d 57 d8 lea -0x28(%rdi),%r10
3158: 48 85 ff test %rdi,%rdi
315b: 49 0f 45 c2 cmovne %r10,%rax
315f: eb 74 jmp 31d5
<__xfrm_state_lookup+0xe5>
3161: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
/root/zach/kernel/linux-3.14.13/net/xfrm/xfrm_state.c:676
3168: 66 44 39 88 c2 00 00 cmp %r9w,0xc2(%rax)
316f: 00
3170: 75 56 jne 31c8
<__xfrm_state_lookup+0xd8>
3172: 39 48 50 cmp %ecx,0x50(%rax)
3175: 75 51 jne 31c8
<__xfrm_state_lookup+0xd8>
3177: 44 38 40 54 cmp %r8b,0x54(%rax)
317b: 75 4b jne 31c8
<__xfrm_state_lookup+0xd8>
The failing offset is 0x3168, which is on line 676:
667 static struct xfrm_state *__xfrm_state_lookup(struct net *net, u32
mark,
668 const
xfrm_address_t *daddr,
669 __be32 spi, u8 proto,
670 unsigned short family)
671 {
672 unsigned int h = xfrm_spi_hash(net, daddr, spi, proto,
family);
673 struct xfrm_state *x;
674
675 hlist_for_each_entry(x, net->xfrm.state_byspi+h, byspi) {
676 if (x->props.family != family ||
677 x->id.spi != spi ||
678 x->id.proto != proto ||
679 !xfrm_addr_equal(&x->id.daddr, daddr, family))
680 continue;
681
682 if ((mark & x->mark.m) != x->mark.v)
683 continue;
684 xfrm_state_hold(x);
685 return x;
686 }
687
688 return NULL;
689 }
This might be related to the fact that we see unexpected high number of SPIs in
ip xfrm state:
ip xfrm state | grep -c ^src
7857
Instead of expected ~ 102*2=204 SPIs. Some of the SPIs are in a stale state, on
the affected nodes, we see this in charon.log:
Sep 18 10:15:57 13[KNL] <tch059|49961> querying SAD entry with SPI c663d950
failed: No such process (3)
Sep 18 10:15:57 13[KNL] <tch059|49961> querying SAD entry with SPI c5265bed
failed: No such process (3)
Sep 18 10:15:57 13[KNL] <tch059|49961> querying SAD entry with SPI cea44e84
failed: No such process (3)
Sep 18 10:15:57 05[KNL] <tch059|49972> querying SAD entry with SPI c218d962
failed: No such process (3)
Sep 18 10:15:57 07[KNL] <tch059|50015> querying SAD entry with SPI c08f7af3
failed: No such process (3)
Sep 18 10:15:57 13[KNL] <tch059|49961> querying SAD entry with SPI ca3eb959
failed: No such process (3)
Sep 18 10:15:57 05[KNL] <tch059|49972> querying SAD entry with SPI ccd82ddf
failed: No such process (3)
Sep 18 10:15:57 07[KNL] <tch059|50015> querying SAD entry with SPI c5e8e50d
failed: No such process (3)
Sep 18 10:15:57 13[KNL] <tch059|49961> querying SAD entry with SPI c7c6f94f
failed: No such process (3)
Some of the point to point assosiations are there multiple times:
# ip xfrm state | grep ^src | sort | uniq -c | sort -rn | head -n10
3528 src 5.45.A.B dst 5.45.C.D
3528 src 5.45.C.D dst 5.45.A.B
88 src 5.45.A.B dst 5.45.E.F
88 src 5.45.E.F dst 5.45.A.B
I am happy to provide more information, if necessary.
Jiri Horky
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply
* Re: [PATCH] scsi: fix kconfig dependency warnings for SCSI_FC_ATTRS
From: David Miller @ 2014-09-22 16:11 UTC (permalink / raw)
To: rdunlap; +Cc: netdev, linux-scsi, jbottomley, anish
In-Reply-To: <541CC163.3080709@infradead.org>
From: Randy Dunlap <rdunlap@infradead.org>
Date: Fri, 19 Sep 2014 16:50:59 -0700
> From: Randy Dunlap <rdunlap@infradead.org>
>
> Fix kconfig dependency warnings which can lead to build errors:
>
> warning: (SCSI_BNX2X_FCOE && LIBFCOE && TCM_QLA2XXX) selects LIBFC which has unmet direct dependencies (SCSI_LOWLEVEL && SCSI && SCSI_FC_ATTRS)
>
> warning: (FCOE && FCOE_FNIC) selects LIBFCOE which has unmet direct dependencies (SCSI_LOWLEVEL && SCSI && SCSI_FC_ATTRS)
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Randy, I think we need to propagate usage of depends into LIBFC and LIBFCOE as well.
I'm playing around with the following patch and will probably use this to resolve
everything.
Thanks.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b745012..bd85fb4 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -592,21 +592,21 @@ config LIBFC
config LIBFCOE
tristate "LibFCoE module"
- select LIBFC
+ depends on LIBFC
---help---
Library for Fibre Channel over Ethernet module
config FCOE
tristate "FCoE module"
depends on PCI
- select LIBFCOE
+ depends on LIBFCOE
---help---
Fibre Channel over Ethernet module
config FCOE_FNIC
tristate "Cisco FNIC Driver"
depends on PCI && X86
- select LIBFCOE
+ depends on LIBFCOE
help
This is support for the Cisco PCI-Express FCoE HBA.
diff --git a/drivers/scsi/bnx2fc/Kconfig b/drivers/scsi/bnx2fc/Kconfig
index 02b0ba8..0978828 100644
--- a/drivers/scsi/bnx2fc/Kconfig
+++ b/drivers/scsi/bnx2fc/Kconfig
@@ -2,11 +2,11 @@ config SCSI_BNX2X_FCOE
tristate "QLogic NetXtreme II FCoE support"
depends on PCI
depends on (IPV6 || IPV6=n)
+ depends on LIBFC
+ depends on LIBFCOE
select NETDEVICES
select ETHERNET
select NET_VENDOR_BROADCOM
- select LIBFC
- select LIBFCOE
select CNIC
---help---
This driver supports FCoE offload for the QLogic NetXtreme II
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 7d65776..113e6c9 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -31,7 +31,7 @@ config SCSI_QLA_FC
config TCM_QLA2XXX
tristate "TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs"
depends on SCSI_QLA_FC && TARGET_CORE
- select LIBFC
+ depends on LIBFC
select BTREE
default n
---help---
^ permalink raw reply related
* Re: [PATCH net-next v2 2/5] net: tcp: add flag for ca to indicate that ECN is required
From: Stephen Hemminger @ 2014-09-22 16:26 UTC (permalink / raw)
To: Florian Westphal
Cc: davem, hagen, lars, eric.dumazet, fontana, hannes, glenn.judd,
dborkman, netdev
In-Reply-To: <1411248562-26581-3-git-send-email-fw@strlen.de>
On Sat, 20 Sep 2014 23:29:19 +0200
Florian Westphal <fw@strlen.de> wrote:
> +static inline void
> +TCP_ECN_create_request(struct request_sock *req, const struct sk_buff *skb,
> + const struct sock *listen_sk)
Maybe good time to switch to lower case here for function name.
^ permalink raw reply
* Re: [PATCH net-next v2 0/5] net: tcp: DCTCP congestion control algorithm
From: Stephen Hemminger @ 2014-09-22 16:28 UTC (permalink / raw)
To: Florian Westphal
Cc: davem, hagen, lars, eric.dumazet, fontana, hannes, glenn.judd,
dborkman, netdev
In-Reply-To: <1411248562-26581-1-git-send-email-fw@strlen.de>
On Sat, 20 Sep 2014 23:29:17 +0200
Florian Westphal <fw@strlen.de> wrote:
> This patch series adds support for the DataCenter TCP (DCTCP) congestion
> control algorithm. Please see individual patches for the details.
>
> Over the last couple of months, we have resolved all outstanding issues
> from last time in the background and as agreed with Dave, we're now
> sending v2 of the set.
>
> The last patch adds DCTCP as a congestion control module, and previous
> ones add needed infrastructure to extend the congestion control framework.
>
> Joint work between Florian Westphal, Daniel Borkmann and Glenn Judd.
>
> v1 -> v2:
> - Rebased to latest net-next
> - Addressed Eric's feedback, thanks!
> - Update stale comment wrt. DCTCP ECN usage
> - Don't call INET_ECN_xmit for every packet
> - Add dctcp ss/inetdiag support to expose internal stats to userspace
>
> Thanks!
>
> Daniel Borkmann (2):
> net: tcp: add flag for ca to indicate that ECN is required
> net: tcp: add DCTCP congestion control algorithm
>
> Florian Westphal (3):
> net: tcp: assign tcp cong_ops when tcp sk is created
> net: tcp: split ack slow/fast events from cwnd_event
> net: tcp: more detailed ACK events and events for CE marked packets
>
> Documentation/networking/dctcp.txt | 43 ++++
> include/net/tcp.h | 80 ++++++--
> include/uapi/linux/inet_diag.h | 13 +
> net/ipv4/Kconfig | 26 ++
> net/ipv4/Makefile | 1
> net/ipv4/tcp.c | 6
> net/ipv4/tcp_cong.c | 46 ++--
> net/ipv4/tcp_dctcp.c | 344 +++++++++++++++++++++++++++++++++++++
> net/ipv4/tcp_input.c | 36 +++
> net/ipv4/tcp_minisocks.c | 5
> net/ipv4/tcp_output.c | 30 ++-
> net/ipv4/tcp_westwood.c | 28 +--
> 12 files changed, 577 insertions(+), 81 deletions(-)
The CC ops stuff looks good.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
^ permalink raw reply
* Re: [RFC v2 3/6] kthread: warn on kill signal if not OOM
From: Luis R. Rodriguez @ 2014-09-22 16:36 UTC (permalink / raw)
To: Tejun Heo, Santosh Rastapur, Jiri Kosina, Petr Mladek
Cc: Dmitry Torokhov, Greg Kroah-Hartman, Wu Zhangjin, Takashi Iwai,
Arjan van de Ven, linux-kernel@vger.kernel.org, Oleg Nesterov,
Andrew Morton, Tetsuo Handa, Joseph Salisbury, Benjamin Poirier,
One Thousand Gnomes, Tim Gardner, Pierre Fersing,
Nagalakshmi Nandigama, Praveen Krishnamoorthy, Sreekanth Reddy,
Abhijit Mahajan, Casey Leedom, Hariprasa
In-Reply-To: <CAB=NE6XH64QLfwoE3r7uf3SYKNJMzP-tjUkrxDwVca7G2zOxBQ@mail.gmail.com>
On Mon, Sep 8, 2014 at 7:57 PM, Luis R. Rodriguez
<mcgrof@do-not-panic.com> wrote:
>> Why do we care about the priority of probing tasks? Does that
>> actually make any meaningful difference? If so, how?
>
> As I noted before -- I have yet to provide clear metrics but at least
> changing both init paths + probe from finit_module() to kthread
> certainly had a measurable time increase, I suspect using
> queue_work(system_unbound_wq, async_probe_work) will make probe
> slower. I'll get to these metrics this week.
The results are in and I'm glad to report my suspicions were incorrect
about kthread() being slower than queue_work(system_unbound_wq), it
actually works faster. Results will likely vary depending on
subsystems but in this particular case the cxgb4 driver was tested
requiring firmware loading and then without requiring firmware loading
and for these two types of driver loading all mechanisms make probe
take just about the same out of time. What was surprising was that
when firmware loading is required the amount of time it takes to run
probe does vary and quite considerably in terms of microseconds. The
discrepancies are by no means terrible... but should be considered if
one is thinking of large systems and if we do wish to optimize things
further and offer equivalent behavior, specially when probing multiple
devices with the same driver. The method used to collect the amount of
time for probe was to use:
ktime_t calltime, delta, rettime;
calltime = ktime_get();
driver_attach();
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
And then print that time of microsecond out right after it finishes,
whether that be through the default kernel synchronous run or the
async runs.
The collection and testing was then done by Santosh. Details of the
collections are at:
https://bugzilla.novell.com/show_bug.cgi?id=877622
The summary:
The driver actually probed 2 cards in the tests so we don't have
results for 1 card, the kernel serially calls probe for each device so
to get the amount of time for one run lets just divide the results by
2. For each strategy there is the requirement of using firmware and a
run where no firmware loading is required. The results for both cards
are:
=====================================================================|
strategy fw (usec) no-fw (usec) |
---------------------------------------------------------------------|
synchronous 48945138 2615126 |
kthread 50132831 2619737 |
queue_work(system_unbound_wq) 49827323 2615262 |
---------------------------------------------------------------------|
For one device then that comes out to:
=====================================================================|
strategy fw (usec) no-fw (usec) |
---------------------------------------------------------------------|
synchronous 24472569 1307563 |
kthread 25066415.5 1309868.5 |
queue_work(system_unbound_wq) 24913661.5 1307631 |
---------------------------------------------------------------------|
Converting that to seconds:
=====================================================================|
strategy fw (s) no-fw (s) |
---------------------------------------------------------------------|
synchronous 24.47 1.31 |
kthread 25.07 1.31 |
queue_work(system_unbound_wq) 24.91 1.31 |
---------------------------------------------------------------------|
Graph friendly versions of the results for probe of 1 device:
Probe with firmware:
http://drvbp1.linux-foundation.org/~mcgrof/images/probe-measurements/probe-cgxb4-firmware.png
Probe without firmware:
http://drvbp1.linux-foundation.org/~mcgrof/images/probe-measurements/probe-cgxb4-no-firmware.png
Luis
^ permalink raw reply
* Re: [PATCHv6 net-next 1/3] sunvnet: upgrade to VIO protocol version 1.6
From: Raghuram Kothakota @ 2014-09-22 16:40 UTC (permalink / raw)
To: David L Stevens; +Cc: David Miller, netdev
In-Reply-To: <541FA83B.2050608@oracle.com>
On Sep 21, 2014, at 9:40 PM, David L Stevens <david.stevens@oracle.com> wrote:
>
>
>> On 09/18/2014 02:49 PM, Raghuram Kothakota wrote:
>
>>> In the virtualization world, we want resources to be efficiently used and memory is
>>> still very important resource. My concern is mostly because this memory usage of
>>> 32+MB is on a per LDC basis. LDoms today supports a max of 128 domains, but
>>> from my experience seen actual deployments of the order of 50 domains. This is
>>> going up as the platforms getting more and more powerful. If there are really
>>> that many peers, then the amount of memory consumed by one vnet instance
>>> is 50 * 32+MB = 1.6GB+. It's fine if this memory is really used, but it seems like this
>>> will be useful only when the peer is another linux guest with this version of vnet and
>>> also the MTU is configured to use 64K. The memory is being wasted for all other
>>> peers that either don't support 64K MTU or not configured to use it and also
>>> the switch port as obviously it doesn't support 64K MTU today.
>
> I think I have a solution for this -- I'm doing some experimenting, but it may be a few days.
>
> However, fundamentally, the problem is that there are n^2-n links both ways, so 50 LDOMs on the same vswitch
> will always be 2450X the resources of a single pair, and lead to scary aggregate numbers. Large installations
> really need more vswitches with fewer LDOMs per switch, at least with the current code.
My example is certainly an extreme case, we introduced an option to
disable these inter-vnet-links mainly due to this explosion of LDC usage.
We advise customers to disable the inter-vnet-links when they see the
need to create a large number of vnets in a given vswtich, typically it is
the case with management networks.
We are also looking to automatically disabling these links when we detect more
vnets(probably >16) in a given vswitch.
-Raghuram
>
> +-DLS
^ permalink raw reply
* Re: [PATCH] scsi: fix kconfig dependency warnings for SCSI_FC_ATTRS
From: Christoph Hellwig @ 2014-09-22 16:44 UTC (permalink / raw)
To: David Miller; +Cc: hch, rdunlap, netdev, linux-scsi, jbottomley, anish
In-Reply-To: <20140922.115658.940423588560943657.davem@davemloft.net>
On Mon, Sep 22, 2014 at 11:56:58AM -0400, David Miller wrote:
> > CONFIG_SCSI_QLA_FC currently selects SCSI_FC_ATTRS, so we shouldn't
> > need this here. Also any reason not to switch that one over to a
> > depends as well?
>
> Christoph, I understand your confusion now, in the networking tree SCSI_QLA_FC
> "depends" on SCSI_FC_ATTRS now, and this is what Randy's patches are against.
Ok. The fixes look fine for me if you checked they make sense vs the net
tree.
Acked-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply
* Re: Fw: [Bug 84991] New: Adding a gre tunnel causes a kernel panic
From: Eric Dumazet @ 2014-09-22 17:09 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: netdev
In-Reply-To: <20140922090242.5ef15c83@urahara>
On Mon, 2014-09-22 at 09:02 -0700, Stephen Hemminger wrote:
> Not good, and user did bisection.
>
> using git bisect, the below commit introduced the above bug.
>
> [7d442fab0a6777fd7612cfcada32ea859553d370] ipv4: Cache dst in tunnels
>
>
> commit 7d442fab0a6777fd7612cfcada32ea859553d370
> Author: Tom Herbert <therbert@google.com>
> Date: Thu Jan 2 11:48:26 2014 -0800
>
> ipv4: Cache dst in tunnels
>
> Avoid doing a route lookup on every packet being tunneled.
>
> In ip_tunnel.c cache the route returned from ip_route_output if
> the tunnel is "connected" so that all the rouitng parameters are
> taken from tunnel parms for a packet. Specifically, not NBMA tunnel
> and tos is from tunnel parms (not inner packet).
>
> Signed-off-by: Tom Herbert <therbert@google.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
>
>
> Begin forwarded message:
>
> Date: Sun, 21 Sep 2014 16:56:08 -0700
> From: "bugzilla-daemon@bugzilla.kernel.org" <bugzilla-daemon@bugzilla.kernel.org>
> To: "stephen@networkplumber.org" <stephen@networkplumber.org>
> Subject: [Bug 84991] New: Adding a gre tunnel causes a kernel panic
>
>
> https://bugzilla.kernel.org/show_bug.cgi?id=84991
>
> Bug ID: 84991
> Summary: Adding a gre tunnel causes a kernel panic
> Product: Networking
> Version: 2.5
> Kernel Version: 3.17.0-rc5 #82 SMP PREEMPT
> Hardware: x86-64
> OS: Linux
> Tree: Mainline
> Status: NEW
> Severity: high
> Priority: P1
> Component: IPV4
> Assignee: shemminger@linux-foundation.org
> Reporter: joe9mail@gmail.com
> Regression: No
Thanks, I'll send a fix.
^ permalink raw reply
* randconfig build error with next-20140922, in drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
From: Jim Davis @ 2014-09-22 17:16 UTC (permalink / raw)
To: Stephen Rothwell, linux-next, linux-kernel, netdev,
David S. Miller
[-- Attachment #1: Type: text/plain, Size: 2474 bytes --]
Building with the attached random configuration file,
warning: (SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_BNX2X_FCOE)
selects NETDEVICES which has unmet direct dependencies (NET)
warning: (SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_BNX2_ISCSI &&
SCSI_BNX2X_FCOE) selects ETHERNET which has unmet direct dependencies
(NETDEVICES && NET)
warning: (SCSI_BNX2X_FCOE && LIBFCOE && TCM_QLA2XXX) selects LIBFC
which has unmet direct dependencies (SCSI_LOWLEVEL && SCSI &&
SCSI_FC_ATTRS)
warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct
dependencies (DMADEVICES && MFD_TIMBERDALE)
warning: (PCH_GBE) selects PTP_1588_CLOCK_PCH which has unmet direct
dependencies ((X86_32 || COMPILE_TEST) && HAS_IOMEM && NET)
warning: (SFC && TILE_NET && AMD_XGBE && BFIN_MAC_USE_HWSTAMP &&
TIGON3 && BNX2X && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN &&
SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR &&
PTP_1588_CLOCK_IXP46X && DP83640_PHY) selects PTP_1588_CLOCK which has
unmet direct dependencies (NET)
warning: (SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_BNX2X_FCOE)
selects NETDEVICES which has unmet direct dependencies (NET)
warning: (SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_BNX2_ISCSI &&
SCSI_BNX2X_FCOE) selects ETHERNET which has unmet direct dependencies
(NETDEVICES && NET)
warning: (SCSI_BNX2X_FCOE && LIBFCOE && TCM_QLA2XXX) selects LIBFC
which has unmet direct dependencies (SCSI_LOWLEVEL && SCSI &&
SCSI_FC_ATTRS)
warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct
dependencies (DMADEVICES && MFD_TIMBERDALE)
warning: (PCH_GBE) selects PTP_1588_CLOCK_PCH which has unmet direct
dependencies ((X86_32 || COMPILE_TEST) && HAS_IOMEM && NET)
warning: (SFC && TILE_NET && AMD_XGBE && BFIN_MAC_USE_HWSTAMP &&
TIGON3 && BNX2X && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN &&
SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR &&
PTP_1588_CLOCK_IXP46X && DP83640_PHY) selects PTP_1588_CLOCK which has
unmet direct dependencies (NET)
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function
‘pch_ptp_match’:
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error:
implicit declaration of function ‘ptp_classify_raw’
[-Werror=implicit-function-declaration]
if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
^
cc1: some warnings being treated as errors
make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1
[-- Attachment #2: randconfig-1411400512.txt --]
[-- Type: text/plain, Size: 95388 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.17.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_CMDLINE_PARSER=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP is not set
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_GOLDFISH=y
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_X86_16BIT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_AREAS=7
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=m
# CONFIG_ACPI_AC is not set
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
# CONFIG_ACPI_THERMAL is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_DEBUG=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
# CONFIG_PCIEASPM is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
# CONFIG_RAPIDIO_CPS_XX is not set
CONFIG_RAPIDIO_TSI568=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# CONFIG_IA32_EMULATION is not set
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
# CONFIG_NET is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_ESB2ROM is not set
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=m
# CONFIG_MTD_PCI is not set
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
CONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_UBI is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
# CONFIG_PARIDE_PCD is not set
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
# CONFIG_PARIDE_FIT2 is not set
CONFIG_PARIDE_FIT3=m
# CONFIG_PARIDE_EPAT is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NVME is not set
CONFIG_BLK_DEV_SKD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_INTEL_MID_PTI=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29020=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=m
CONFIG_DS1682=y
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_SRAM is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=y
#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=y
#
# Intel MIC Card Driver
#
# CONFIG_INTEL_MIC_CARD is not set
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_IDE_GD_ATA is not set
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=m
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_LOGGING=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=m
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_HPTIOP=m
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=m
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_ACPI is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not set
# CONFIG_ATA_BMDMA is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_OPTI=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
CONFIG_ARCNET=m
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# CAIF transport drivers
#
CONFIG_VHOST_RING=y
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=y
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_XGENE=y
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ATHEROS is not set
CONFIG_NET_CADENCE=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_CALXEDA_XGMAC=y
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
# CONFIG_E1000 is not set
CONFIG_E1000E=m
CONFIG_IGB=y
# CONFIG_IGB_HWMON is not set
# CONFIG_IGB_DCA is not set
# CONFIG_IGBVF is not set
CONFIG_IXGB=m
# CONFIG_IXGBE is not set
CONFIG_I40E=m
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
CONFIG_JME=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_FEALNX=m
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_SH_ETH is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
CONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_PLATFORM is not set
# CONFIG_STMMAC_PCI is not set
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
CONFIG_NET_SB1000=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=y
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM87XX_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MICREL_KS8995MA=m
CONFIG_PLIP=m
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
# CONFIG_HDLC_PPP is not set
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
CONFIG_DSCC4_PCI_RST=y
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
#
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DA9052=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_MC13783 is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2005=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_SUN4I=m
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=m
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
# CONFIG_INPUT_AD714X_SPI is not set
CONFIG_INPUT_BMA150=m
# CONFIG_INPUT_MAX8997_HAPTIC is not set
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_BEEPER=m
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_RETU_PWRBUTTON=m
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PALMAS_PWRBUTTON=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9055_ONKEY=m
CONFIG_INPUT_PCAP=m
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_IMS_PCU=m
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_OLPC_APSP=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=y
CONFIG_GOLDFISH_TTY=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_FINTEK=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CLPS711X=m
CONFIG_SERIAL_MAX3100=m
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_MFD_HSU=y
# CONFIG_SERIAL_MFD_HSU_CONSOLE is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_MCTRL_GPIO=m
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=m
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_ST33_I2C=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_HMC_DRV=m
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EFM32=m
CONFIG_I2C_EG20T=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_KEMPLD=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_RIIC=y
CONFIG_I2C_SH_MOBILE=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SUN6I_P2WI=m
CONFIG_I2C_XILINX=y
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
# CONFIG_I2C_VIPERBOARD is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_CROS_EC_TUNNEL is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
# CONFIG_SPI_ATMEL is not set
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM63XX_HSSPI=m
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CLPS711X=y
CONFIG_SPI_EP93XX=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_IMX=y
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_TI_QSPI=y
# CONFIG_SPI_OMAP_100K is not set
CONFIG_SPI_ORION=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_RSPI=y
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=m
# CONFIG_SPI_TEGRA114 is not set
CONFIG_SPI_TEGRA20_SFLASH=m
# CONFIG_SPI_TEGRA20_SLINK is not set
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_TXX9 is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
CONFIG_SPI_XTENSA_XTFPGA=y
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_PCI is not set
CONFIG_SPI_DW_MMIO=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPMI=y
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=m
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_VX855=m
CONFIG_GPIO_LYNXPOINT=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_CRYSTAL_COVE=m
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_TC3589X is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TWL6040=y
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_BT8XX=m
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_INTEL_MID=y
CONFIG_GPIO_PCH=m
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
# CONFIG_GPIO_KEMPLD is not set
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_PALMAS=y
#
# USB GPIO expanders:
#
CONFIG_GPIO_VIPERBOARD=m
CONFIG_W1=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_MXC=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_POWER_RESET=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_DA9055 is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=m
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_RCAR_THERMAL=y
CONFIG_INTEL_POWERCLAMP=y
# CONFIG_ACPI_INT3403_THERMAL is not set
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=m
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RTSX_USB=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
CONFIG_TPS65010=y
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=m
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_AS3711=m
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_DA9052=m
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=m
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=m
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCAP=y
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_RN5T618 is not set
CONFIG_REGULATOR_S2MPA01=m
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS65912=m
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_DVB_CORE=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
# CONFIG_RC_DECODERS is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_IMG=m
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_RC_ST is not set
CONFIG_IR_SUNXI=m
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_VIA_CAMERA is not set
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m
CONFIG_VIDEO_DM6446_CCDC=m
# CONFIG_VIDEO_DM355_CCDC is not set
CONFIG_VIDEO_SH_VOU=y
CONFIG_VIDEO_TIMBERDALE=y
CONFIG_VIDEO_M32R_AR=y
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
CONFIG_VIDEO_MX2_EMMAPRP=y
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
# CONFIG_VIDEO_SH_VEU is not set
CONFIG_VIDEO_RENESAS_VSP1=m
# CONFIG_VIDEO_TI_VPE is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
CONFIG_RADIO_SI4713=y
# CONFIG_USB_SI4713 is not set
# CONFIG_PLATFORM_SI4713 is not set
# CONFIG_I2C_SI4713 is not set
CONFIG_USB_MR800=m
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=y
#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
# CONFIG_CYPRESS_FIRMWARE is not set
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
#
# Video and audio decoders
#
#
# Video encoders
#
CONFIG_VIDEO_ADV7343=y
#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=m
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=y
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Multistandard (satellite) frontends
#
#
# Multistandard (cable + terrestrial) frontends
#
#
# DVB-S (satellite) frontends
#
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_AS102_FE is not set
#
# DVB-C (cable) frontends
#
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
#
# ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
#
# SEC control devices for DVB-S
#
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_PTN3460 is not set
CONFIG_DRM_TDFX=m
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_I915_FBDEV is not set
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_CIRRUS_QEMU is not set
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CLPS711X=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=m
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=m
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=m
CONFIG_FB_AUO_K1900=m
CONFIG_FB_AUO_K1901=m
CONFIG_FB_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=y
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=m
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA9052=m
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_ADP5520 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=m
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_OT200 is not set
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_AS3711=m
CONFIG_BACKLIGHT_GPIO=m
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=m
CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=m
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=m
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
#
# USB HID support
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_MVEBU=m
CONFIG_USB_XHCI_RCAR=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
# CONFIG_USB_FUSBH200_HCD is not set
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_MAX3421_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_HOST=y
#
# Platform Glue Driver Support
#
# CONFIG_USB_DWC3_EXYNOS is not set
CONFIG_USB_DWC3_PCI=m
CONFIG_USB_DWC3_KEYSTONE=m
CONFIG_USB_DWC3_QCOM=m
#
# Debugging features
#
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
# CONFIG_DWC3_HOST_USB3_LPM_ENABLE is not set
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=m
CONFIG_NOP_USB_XCEIV=m
# CONFIG_AM335X_PHY_USB is not set
CONFIG_USB_GPIO_VBUS=y
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=m
# CONFIG_USB_MSM_OTG is not set
CONFIG_USB_RCAR_PHY=m
CONFIG_USB_RCAR_GEN2_PHY=y
# CONFIG_USB_GADGET is not set
CONFIG_UWB=m
# CONFIG_UWB_HWA is not set
CONFIG_UWB_WHCI=m
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_GOLDFISH is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_DW=m
# CONFIG_MMC_DW_IDMAC is not set
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_EXYNOS=m
# CONFIG_MMC_DW_K3 is not set
# CONFIG_MMC_DW_PCI is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=m
# CONFIG_LEDS_MC13783 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_INTEL_MIC_X100_DMA=m
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_SH_DMAE_BASE is not set
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_SUN6I=m
CONFIG_NBPFAXI_DMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=m
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=m
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
# CONFIG_COMEDI_PCM3724 is not set
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
# CONFIG_COMEDI_RTI800 is not set
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAC02=m
CONFIG_COMEDI_DAS16M1=m
# CONFIG_COMEDI_DAS08_ISA is not set
# CONFIG_COMEDI_DAS800 is not set
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
# CONFIG_COMEDI_DT2815 is not set
# CONFIG_COMEDI_DT2817 is not set
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_UNIOXX5=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_NI_LABPC_ISA=m
CONFIG_COMEDI_PCMAD=m
# CONFIG_COMEDI_PCMDA12 is not set
CONFIG_COMEDI_PCMMIO=m
# CONFIG_COMEDI_PCMUIO is not set
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADDI_WATCHDOG=m
CONFIG_COMEDI_ADDI_APCI_035=m
CONFIG_COMEDI_ADDI_APCI_1032=m
# CONFIG_COMEDI_ADDI_APCI_1500 is not set
CONFIG_COMEDI_ADDI_APCI_1516=m
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7X3X=m
# CONFIG_COMEDI_ADL_PCI8164 is not set
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
# CONFIG_COMEDI_AMPLC_PC236_PCI is not set
CONFIG_COMEDI_AMPLC_PC263_PCI=m
# CONFIG_COMEDI_AMPLC_PCI224 is not set
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
# CONFIG_COMEDI_DAS08_PCI is not set
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_MF6X4=m
# CONFIG_COMEDI_ICP_MULTI is not set
# CONFIG_COMEDI_DAQBOARD2000 is not set
CONFIG_COMEDI_JR3_PCI=m
# CONFIG_COMEDI_KE_COUNTER is not set
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIMDAS=m
# CONFIG_COMEDI_CB_PCIMDDA is not set
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
# CONFIG_COMEDI_NI_65XX is not set
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC_PCI=m
# CONFIG_COMEDI_NI_PCIDIO is not set
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
# CONFIG_COMEDI_S626 is not set
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=m
# CONFIG_COMEDI_NI_USB6501 is not set
# CONFIG_COMEDI_USBDUX is not set
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
# CONFIG_COMEDI_VMK80XX is not set
CONFIG_COMEDI_8255=m
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_RTS5208=m
#
# IIO staging drivers
#
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
CONFIG_ADIS16203=m
CONFIG_ADIS16204=m
CONFIG_ADIS16209=m
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
CONFIG_LIS3L02DQ=m
CONFIG_SCA3000=m
#
# Analog to digital converters
#
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
# CONFIG_AD7606_IFACE_SPI is not set
CONFIG_AD7780=m
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
CONFIG_AD7280=m
# CONFIG_LPC32XX_ADC is not set
CONFIG_MXS_LRADC=m
# CONFIG_SPEAR_ADC is not set
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
# CONFIG_ADT7316_SPI is not set
# CONFIG_ADT7316_I2C is not set
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7152=m
# CONFIG_AD7746 is not set
#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=m
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
#
# Light sensors
#
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
# CONFIG_TSL2583 is not set
CONFIG_TSL2x7x=m
#
# Magnetometer sensors
#
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
# CONFIG_SENSORS_HMC5843_SPI is not set
#
# Active energy metering IC
#
CONFIG_ADE7753=m
CONFIG_ADE7754=m
CONFIG_ADE7758=m
CONFIG_ADE7759=m
# CONFIG_ADE7854 is not set
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
CONFIG_AD2S1200=m
CONFIG_AD2S1210=m
#
# Triggers - standalone
#
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
CONFIG_FB_XGI=m
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_GOLDFISH_AUDIO is not set
CONFIG_MTD_GOLDFISH_NAND=m
# CONFIG_XILLYBUS is not set
CONFIG_DGNC=y
CONFIG_DGAP=y
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
CONFIG_CRYPTO_THREEFISH=y
# CONFIG_UNISYSSPAR is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=m
#
# SOC (System On Chip) specific Drivers
#
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SH_TIMER_MTU2=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=m
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_SM5502=m
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
CONFIG_BMA180=m
CONFIG_BMC150_ACCEL=m
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_KXSD9 is not set
CONFIG_MMA8452=m
CONFIG_KXCJK1013=m
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD7266=m
CONFIG_AD7291=m
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7791 is not set
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD799X=m
CONFIG_MAX1027=m
CONFIG_MAX1363=m
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
CONFIG_NAU7802=m
CONFIG_TI_ADC081C=m
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_AM335X_ADC is not set
CONFIG_VIPERBOARD_ADC=m
CONFIG_XILINX_XADC=m
#
# Amplifiers
#
CONFIG_AD8366=m
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
# CONFIG_AD5449 is not set
# CONFIG_AD5504 is not set
CONFIG_AD5624R_SPI=m
CONFIG_AD5686=m
# CONFIG_AD5755 is not set
# CONFIG_AD5764 is not set
CONFIG_AD5791=m
# CONFIG_AD7303 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
CONFIG_MCP4922=m
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS450=m
# CONFIG_BMG160 is not set
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_ITG3200=m
#
# Humidity sensors
#
CONFIG_DHT11=m
CONFIG_SI7005=m
#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16480=m
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_CM32181=m
CONFIG_CM36651=m
CONFIG_GP2AP020A00F=m
# CONFIG_ISL29125 is not set
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=m
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_TSL4531=m
CONFIG_VCNL4000=m
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=m
#
# Pressure sensors
#
CONFIG_HID_SENSOR_PRESS=m
CONFIG_MPL115=m
CONFIG_MPL3115=m
CONFIG_T5403=m
#
# Lightning sensors
#
CONFIG_AS3935=m
#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
CONFIG_TMP006=m
# CONFIG_NTB is not set
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
CONFIG_VME_TSI148=m
#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_VME_PIO2=m
CONFIG_PWM=y
CONFIG_PWM_CLPS711X=y
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_RENESAS_TPU is not set
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=m
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_OMAP_CONTROL_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_KERNFS=y
# CONFIG_SYSFS is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=y
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
# CONFIG_FAIL_MMC_REQUEST is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KPROBE_EVENT is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_TEST_SYSCALLS=y
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_MODULE is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_DOUBLEFAULT is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_BIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA1_MB=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DES3_EDE_X86_64=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_LZ4=m
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_PUBLIC_KEY_ALGO_RSA=m
# CONFIG_X509_CERTIFICATE_PARSER is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=y
CONFIG_CRC64_ECMA=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_MPILIB=m
CONFIG_UCS2_STRING=y
CONFIG_ARCH_HAS_SG_CHAIN=y
^ permalink raw reply
* [PATCH net] ipv4: do not use this_cpu_ptr() in preemptible context
From: Eric Dumazet @ 2014-09-22 17:21 UTC (permalink / raw)
To: Stephen Hemminger, David Miller; +Cc: netdev, Tom Herbert, joe9mail
In-Reply-To: <1411405767.26859.128.camel@edumazet-glaptop2.roam.corp.google.com>
From: Eric Dumazet <edumazet@google.com>
this_cpu_ptr() in preemptible context is generally bad
Sep 22 05:05:55 br kernel: [ 94.608310] BUG: using smp_processor_id() in
preemptible [00000000] code: ip/2261
Sep 22 05:05:55 br kernel: [ 94.608316] caller is
tunnel_dst_set.isra.28+0x20/0x60 [ip_tunnel]
Sep 22 05:05:55 br kernel: [ 94.608319] CPU: 3 PID: 2261 Comm: ip Not tainted
3.17.0-rc5 #82
We can simply use __this_cpu_ptr(), as preemption is safe in these contexts.
Should fix https://bugzilla.kernel.org/show_bug.cgi?id=84991
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Joe <joe9mail@gmail.com>
Fixes: 9a4aa9af447f ("ipv4: Use percpu Cache route in IP tunnels")
---
net/ipv4/ip_tunnel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index afed1aac2638..421b4f01ee29 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -82,7 +82,7 @@ static void __tunnel_dst_set(struct ip_tunnel_dst *idst,
static void tunnel_dst_set(struct ip_tunnel *t,
struct dst_entry *dst, __be32 saddr)
{
- __tunnel_dst_set(this_cpu_ptr(t->dst_cache), dst, saddr);
+ __tunnel_dst_set(__this_cpu_ptr(t->dst_cache), dst, saddr);
}
static void tunnel_dst_reset(struct ip_tunnel *t)
@@ -106,7 +106,7 @@ static struct rtable *tunnel_rtable_get(struct ip_tunnel *t,
struct dst_entry *dst;
rcu_read_lock();
- idst = this_cpu_ptr(t->dst_cache);
+ idst = __this_cpu_ptr(t->dst_cache);
dst = rcu_dereference(idst->dst);
if (dst && !atomic_inc_not_zero(&dst->__refcnt))
dst = NULL;
^ permalink raw reply related
* Re: Corrupt Network Packets -- 3.17-rc5/rc6
From: Pete Clements @ 2014-09-22 17:24 UTC (permalink / raw)
To: Cong Wang; +Cc: Pete Clements, linux-kernel, Linux Kernel Network Developers
In-Reply-To: <CAM_iQpXQcM2E2oez+nNbbecd25fXqOKNqAfoOgCfQ72-VfBOUA@mail.gmail.com>
Quoting Cong Wang
> <clem@clem.clem-digital.net> wrote:
> > Heads up fyi: system is i386 UP.
> >
> > Started getting some pop3 reception errors from the above system.
> > Investigating the problem discovered scp of the mailbox failed
> > with "Corrupted MAC on input"
> >
> > Problem started with rc5, still in rc6. Running rc4 with no
> > problem.
> >
> > Sorry for lack of better definition.
>
>
> Which driver are you using?
>
Here's the output from boot log:
PCI: setting IRQ 11 as level-triggered
3c59x 0000:00:0d.0: found PCI INT A -> IRQ 11
3c59x: Donald Becker and others.
0000:00:0d.0: 3Com PCI 3c900 Cyclone 10Mbps TPC at d8812000.
--
Pete Clements
^ permalink raw reply
* Re: randconfig build error with next-20140922, in drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
From: David Miller @ 2014-09-22 17:26 UTC (permalink / raw)
To: jim.epost; +Cc: sfr, linux-next, linux-kernel, netdev
In-Reply-To: <CA+r1ZhhHsR=1JRv80Oahp2FeGXU0zkMGdUB56Ryjx50yxWbhKQ@mail.gmail.com>
From: Jim Davis <jim.epost@gmail.com>
Date: Mon, 22 Sep 2014 10:16:26 -0700
> drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function
> ‘pch_ptp_match’:
> drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error:
> implicit declaration of function ‘ptp_classify_raw’
> [-Werror=implicit-function-declaration]
> if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
> ^
> cc1: some warnings being treated as errors
> make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1
These dependencies are so broken.
You cannot select crap without also selecting all of that options
dependencies, and so on and so forth all the way up to the direct
and indirect dependencies that have no dependencies of their own.
The issue specifically is PCH_GBE needs NET_PTP_CLASSIFY.
PCH_GBE "selects" PTP_1588_CLOCK_PCH, which selects PTP_1588_CLOCK,
which selects NET_PTP_CLASSIFY.
But that does not reliably turn on NET_PTP_CLASSIFY. If the top
level PTP_1588_CLOCK_PCH select is what triggers, as explained
about this does not end up select'ing NET_PTP_CLASSIFY.
Said another way, 'select' does not recursively process dependencies.
You have to do them all by hand at each and every selection point.
I'm going to add the NET_PTP_CLASSIFY select to PCH_GBE's Kconfig
entry, but this is not the thing to do long term.
Long term we should be using 'depends' for all of these non-trivial
dependencies, not 'select'.
^ permalink raw reply
* Re: [PATCH net] ipv4: do not use this_cpu_ptr() in preemptible context
From: Eric Dumazet @ 2014-09-22 17:28 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: David Miller, netdev, Tom Herbert, joe9mail
In-Reply-To: <1411406513.26859.136.camel@edumazet-glaptop2.roam.corp.google.com>
On Mon, 2014-09-22 at 10:21 -0700, Eric Dumazet wrote:
> From: Eric Dumazet <edumazet@google.com>
>
> this_cpu_ptr() in preemptible context is generally bad
>
> Sep 22 05:05:55 br kernel: [ 94.608310] BUG: using smp_processor_id() in
> preemptible [00000000] code: ip/2261
> Sep 22 05:05:55 br kernel: [ 94.608316] caller is
> tunnel_dst_set.isra.28+0x20/0x60 [ip_tunnel]
> Sep 22 05:05:55 br kernel: [ 94.608319] CPU: 3 PID: 2261 Comm: ip Not tainted
> 3.17.0-rc5 #82
>
> We can simply use __this_cpu_ptr(), as preemption is safe in these contexts.
>
> Should fix https://bugzilla.kernel.org/show_bug.cgi?id=84991
>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
> Reported-by: Joe <joe9mail@gmail.com>
> Fixes: 9a4aa9af447f ("ipv4: Use percpu Cache route in IP tunnels")
> ---
Hmm, I just saw raw_cpu_ptr() should be used.
I'll send a v2
^ permalink raw reply
* getting rid of ->splice_write?
From: Christoph Hellwig @ 2014-09-22 17:30 UTC (permalink / raw)
To: Al Viro; +Cc: Miklos Szeredi, linux-fsdevel, netdev
Currently only /dev/null, fusedev and the socket code have a
splice_write implementation that isn't iter_file_splice_write, and
it seems like these three could easily be switched over if they
implemented a ->write_iter.
Similarly it seems to be like we could kill ->splice_read by
implementing an equivalent iteration over ->read_iter.
^ permalink raw reply
* [PATCH] ath: change logging functions to return void
From: Joe Perches @ 2014-09-22 17:35 UTC (permalink / raw)
To: Kalle Valo
Cc: John W. Linville, Vladimir Kondratiev, ath10k, linux-wireless,
netdev, linux-kernel, wil6210
The return values are not used by callers of these functions
so change the functions to return void.
Other miscellanea:
o add __printf verification to wil6210 logging functions
No format/argument mismatches found
Signed-off-by: Joe Perches <joe@perches.com>
---
This change is associated to a desire to eventually
change printk to return void.
drivers/net/wireless/ath/ath10k/debug.c | 18 +++++-------------
drivers/net/wireless/ath/ath10k/debug.h | 6 +++---
drivers/net/wireless/ath/ath6kl/common.h | 2 +-
drivers/net/wireless/ath/ath6kl/debug.c | 28 ++++++++--------------------
drivers/net/wireless/ath/ath6kl/debug.h | 13 ++++++-------
drivers/net/wireless/ath/wil6210/debug.c | 14 ++++----------
drivers/net/wireless/ath/wil6210/wil6210.h | 7 +++++--
7 files changed, 32 insertions(+), 56 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index f3f0a80..29eb2aa 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -106,21 +106,18 @@ struct ath10k_dump_file_data {
u8 data[0];
} __packed;
-int ath10k_info(struct ath10k *ar, const char *fmt, ...)
+void ath10k_info(struct ath10k *ar, const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = dev_info(ar->dev, "%pV", &vaf);
+ dev_info(ar->dev, "%pV", &vaf);
trace_ath10k_log_info(&vaf);
va_end(args);
-
- return ret;
}
EXPORT_SYMBOL(ath10k_info);
@@ -142,25 +139,22 @@ void ath10k_print_driver_info(struct ath10k *ar)
}
EXPORT_SYMBOL(ath10k_print_driver_info);
-int ath10k_err(struct ath10k *ar, const char *fmt, ...)
+void ath10k_err(struct ath10k *ar, const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = dev_err(ar->dev, "%pV", &vaf);
+ dev_err(ar->dev, "%pV", &vaf);
trace_ath10k_log_err(&vaf);
va_end(args);
-
- return ret;
}
EXPORT_SYMBOL(ath10k_err);
-int ath10k_warn(struct ath10k *ar, const char *fmt, ...)
+void ath10k_warn(struct ath10k *ar, const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
@@ -173,8 +167,6 @@ int ath10k_warn(struct ath10k *ar, const char *fmt, ...)
trace_ath10k_log_warn(&vaf);
va_end(args);
-
- return 0;
}
EXPORT_SYMBOL(ath10k_warn);
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 5674653..a4d35e4 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -39,9 +39,9 @@ enum ath10k_debug_mask {
extern unsigned int ath10k_debug_mask;
-__printf(2, 3) int ath10k_info(struct ath10k *ar, const char *fmt, ...);
-__printf(2, 3) int ath10k_err(struct ath10k *ar, const char *fmt, ...);
-__printf(2, 3) int ath10k_warn(struct ath10k *ar, const char *fmt, ...);
+__printf(2, 3) void ath10k_info(struct ath10k *ar, const char *fmt, ...);
+__printf(2, 3) void ath10k_err(struct ath10k *ar, const char *fmt, ...);
+__printf(2, 3) void ath10k_warn(struct ath10k *ar, const char *fmt, ...);
void ath10k_print_driver_info(struct ath10k *ar);
#ifdef CONFIG_ATH10K_DEBUGFS
diff --git a/drivers/net/wireless/ath/ath6kl/common.h b/drivers/net/wireless/ath/ath6kl/common.h
index 05debf7..4f82e86 100644
--- a/drivers/net/wireless/ath/ath6kl/common.h
+++ b/drivers/net/wireless/ath/ath6kl/common.h
@@ -22,7 +22,7 @@
#define ATH6KL_MAX_IE 256
-__printf(2, 3) int ath6kl_printk(const char *level, const char *fmt, ...);
+__printf(2, 3) void ath6kl_printk(const char *level, const char *fmt, ...);
/*
* Reflects the version of binary interface exposed by ATH6KL target
diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index 55c4064..81ba48d 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -37,76 +37,64 @@ struct ath6kl_fwlog_slot {
#define ATH6KL_FWLOG_VALID_MASK 0x1ffff
-int ath6kl_printk(const char *level, const char *fmt, ...)
+void ath6kl_printk(const char *level, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
- int rtn;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
- rtn = printk("%sath6kl: %pV", level, &vaf);
+ printk("%sath6kl: %pV", level, &vaf);
va_end(args);
-
- return rtn;
}
EXPORT_SYMBOL(ath6kl_printk);
-int ath6kl_info(const char *fmt, ...)
+void ath6kl_info(const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = ath6kl_printk(KERN_INFO, "%pV", &vaf);
+ ath6kl_printk(KERN_INFO, "%pV", &vaf);
trace_ath6kl_log_info(&vaf);
va_end(args);
-
- return ret;
}
EXPORT_SYMBOL(ath6kl_info);
-int ath6kl_err(const char *fmt, ...)
+void ath6kl_err(const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = ath6kl_printk(KERN_ERR, "%pV", &vaf);
+ ath6kl_printk(KERN_ERR, "%pV", &vaf);
trace_ath6kl_log_err(&vaf);
va_end(args);
-
- return ret;
}
EXPORT_SYMBOL(ath6kl_err);
-int ath6kl_warn(const char *fmt, ...)
+void ath6kl_warn(const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = ath6kl_printk(KERN_WARNING, "%pV", &vaf);
+ ath6kl_printk(KERN_WARNING, "%pV", &vaf);
trace_ath6kl_log_warn(&vaf);
va_end(args);
-
- return ret;
}
EXPORT_SYMBOL(ath6kl_warn);
diff --git a/drivers/net/wireless/ath/ath6kl/debug.h b/drivers/net/wireless/ath/ath6kl/debug.h
index e194c10d..19106ed 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.h
+++ b/drivers/net/wireless/ath/ath6kl/debug.h
@@ -50,10 +50,10 @@ enum ATH6K_DEBUG_MASK {
};
extern unsigned int debug_mask;
-__printf(2, 3) int ath6kl_printk(const char *level, const char *fmt, ...);
-__printf(1, 2) int ath6kl_info(const char *fmt, ...);
-__printf(1, 2) int ath6kl_err(const char *fmt, ...);
-__printf(1, 2) int ath6kl_warn(const char *fmt, ...);
+__printf(2, 3) void ath6kl_printk(const char *level, const char *fmt, ...);
+__printf(1, 2) void ath6kl_info(const char *fmt, ...);
+__printf(1, 2) void ath6kl_err(const char *fmt, ...);
+__printf(1, 2) void ath6kl_warn(const char *fmt, ...);
enum ath6kl_war {
ATH6KL_WAR_INVALID_RATE,
@@ -81,10 +81,9 @@ int ath6kl_debug_init_fs(struct ath6kl *ar);
void ath6kl_debug_cleanup(struct ath6kl *ar);
#else
-static inline int ath6kl_dbg(enum ATH6K_DEBUG_MASK dbg_mask,
- const char *fmt, ...)
+static inline void ath6kl_dbg(enum ATH6K_DEBUG_MASK dbg_mask,
+ const char *fmt, ...)
{
- return 0;
}
static inline void ath6kl_dbg_dump(enum ATH6K_DEBUG_MASK mask,
diff --git a/drivers/net/wireless/ath/wil6210/debug.c b/drivers/net/wireless/ath/wil6210/debug.c
index 9eeabf4..7a925ac 100644
--- a/drivers/net/wireless/ath/wil6210/debug.c
+++ b/drivers/net/wireless/ath/wil6210/debug.c
@@ -17,40 +17,34 @@
#include "wil6210.h"
#include "trace.h"
-int wil_err(struct wil6210_priv *wil, const char *fmt, ...)
+void wil_err(struct wil6210_priv *wil, const char *fmt, ...)
{
struct net_device *ndev = wil_to_ndev(wil);
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = netdev_err(ndev, "%pV", &vaf);
+ netdev_err(ndev, "%pV", &vaf);
trace_wil6210_log_err(&vaf);
va_end(args);
-
- return ret;
}
-int wil_info(struct wil6210_priv *wil, const char *fmt, ...)
+void wil_info(struct wil6210_priv *wil, const char *fmt, ...)
{
struct net_device *ndev = wil_to_ndev(wil);
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
- int ret;
va_start(args, fmt);
vaf.va = &args;
- ret = netdev_info(ndev, "%pV", &vaf);
+ netdev_info(ndev, "%pV", &vaf);
trace_wil6210_log_info(&vaf);
va_end(args);
-
- return ret;
}
int wil_dbg_trace(struct wil6210_priv *wil, const char *fmt, ...)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 133eeb8..d13fa53 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -451,9 +451,12 @@ struct wil6210_priv {
#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr))
#define wil_to_pcie_dev(i) (&i->pdev->dev)
+__printf(2, 3)
int wil_dbg_trace(struct wil6210_priv *wil, const char *fmt, ...);
-int wil_err(struct wil6210_priv *wil, const char *fmt, ...);
-int wil_info(struct wil6210_priv *wil, const char *fmt, ...);
+__printf(2, 3)
+void wil_err(struct wil6210_priv *wil, const char *fmt, ...);
+__printf(2, 3)
+void wil_info(struct wil6210_priv *wil, const char *fmt, ...);
#define wil_dbg(wil, fmt, arg...) do { \
netdev_dbg(wil_to_ndev(wil), fmt, ##arg); \
wil_dbg_trace(wil, fmt, ##arg); \
^ permalink raw reply related
* [PATCH v2 net] ipv4: do not use this_cpu_ptr() in preemptible context
From: Eric Dumazet @ 2014-09-22 17:38 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: David Miller, netdev, Tom Herbert, joe9mail
In-Reply-To: <1411406513.26859.136.camel@edumazet-glaptop2.roam.corp.google.com>
From: Eric Dumazet <edumazet@google.com>
this_cpu_ptr() in preemptible context is generally bad
Sep 22 05:05:55 br kernel: [ 94.608310] BUG: using smp_processor_id()
in
preemptible [00000000] code: ip/2261
Sep 22 05:05:55 br kernel: [ 94.608316] caller is
tunnel_dst_set.isra.28+0x20/0x60 [ip_tunnel]
Sep 22 05:05:55 br kernel: [ 94.608319] CPU: 3 PID: 2261 Comm: ip Not
tainted
3.17.0-rc5 #82
We can simply use raw_cpu_ptr(), as preemption is safe in these
contexts.
Should fix https://bugzilla.kernel.org/show_bug.cgi?id=84991
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Joe <joe9mail@gmail.com>
Fixes: 9a4aa9af447f ("ipv4: Use percpu Cache route in IP tunnels")
---
v2: use latest and shiny raw_cpu_ptr(), as it seems the latest
incantation of ever changing percpu interface.
net/ipv4/ip_tunnel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index afed1aac2638..bd41dd1948b6 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -79,10 +79,10 @@ static void __tunnel_dst_set(struct ip_tunnel_dst *idst,
idst->saddr = saddr;
}
-static void tunnel_dst_set(struct ip_tunnel *t,
+static noinline void tunnel_dst_set(struct ip_tunnel *t,
struct dst_entry *dst, __be32 saddr)
{
- __tunnel_dst_set(this_cpu_ptr(t->dst_cache), dst, saddr);
+ __tunnel_dst_set(raw_cpu_ptr(t->dst_cache), dst, saddr);
}
static void tunnel_dst_reset(struct ip_tunnel *t)
@@ -106,7 +106,7 @@ static struct rtable *tunnel_rtable_get(struct ip_tunnel *t,
struct dst_entry *dst;
rcu_read_lock();
- idst = this_cpu_ptr(t->dst_cache);
+ idst = raw_cpu_ptr(t->dst_cache);
dst = rcu_dereference(idst->dst);
if (dst && !atomic_inc_not_zero(&dst->__refcnt))
dst = NULL;
^ permalink raw reply related
* Re: Corrupt Network Packets -- 3.17-rc5/rc6
From: David Miller @ 2014-09-22 17:38 UTC (permalink / raw)
To: clem; +Cc: xiyou.wangcong, linux-kernel, netdev
In-Reply-To: <201409221724.s8MHOxe5002845@clem.clem-digital.net>
From: Pete Clements <clem@clem.clem-digital.net>
Date: Mon, 22 Sep 2014 13:24:59 -0400 (EDT)
> Quoting Cong Wang
> > <clem@clem.clem-digital.net> wrote:
> > > Heads up fyi: system is i386 UP.
> > >
> > > Started getting some pop3 reception errors from the above system.
> > > Investigating the problem discovered scp of the mailbox failed
> > > with "Corrupted MAC on input"
> > >
> > > Problem started with rc5, still in rc6. Running rc4 with no
> > > problem.
> > >
> > > Sorry for lack of better definition.
> >
> >
> > Which driver are you using?
> >
> Here's the output from boot log:
>
> PCI: setting IRQ 11 as level-triggered
> 3c59x 0000:00:0d.0: found PCI INT A -> IRQ 11
> 3c59x: Donald Becker and others.
> 0000:00:0d.0: 3Com PCI 3c900 Cyclone 10Mbps TPC at d8812000.
Should be fixed by:
commit 8400dd029e764e30361a51a7ae35900ae0032b43
Author: Neil Horman <nhorman@tuxdriver.com>
Date: Wed Sep 17 09:04:45 2014 -0400
3c59x: Fix bad offset spec in skb_frag_dma_map
Recently aded the use of skb_frag_dma_map to 3c59x, but didn't realize it
automatically included the frag_offset internally, as well as provided an option
to specify an extra offset in the parameter list. We need to specify an offset
of 0 in the parameter list to avoid skb corruption that results in lost
connections.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Linux Kernel list <linux-kernel@vger.kernel.org>
CC: "David S. Miller" <davem@davemloft.net>
CC: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 8ab87ff..8ca49f04 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -2186,7 +2186,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
dma_addr = skb_frag_dma_map(&VORTEX_PCI(vp)->dev, frag,
- frag->page_offset,
+ 0,
frag->size,
DMA_TO_DEVICE);
if (dma_mapping_error(&VORTEX_PCI(vp)->dev, dma_addr)) {
^ permalink raw reply related
* [PATCH net-next] mellanox: Change en_print to return void
From: Joe Perches @ 2014-09-22 17:40 UTC (permalink / raw)
To: Amir Vadai; +Cc: netdev, LKML
No caller or macro uses the return value so make it void.
Signed-off-by: Joe Perches <joe@perches.com>
---
This change is associated to a desire to eventually
change printk to return void.
drivers/net/ethernet/mellanox/mlx4/en_main.c | 17 +++++++----------
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 4 ++--
2 files changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index 3626fdf..2091ae88 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -78,27 +78,24 @@ MLX4_EN_PARM_INT(inline_thold, MAX_INLINE,
#define MAX_PFC_TX 0xff
#define MAX_PFC_RX 0xff
-int en_print(const char *level, const struct mlx4_en_priv *priv,
- const char *format, ...)
+void en_print(const char *level, const struct mlx4_en_priv *priv,
+ const char *format, ...)
{
va_list args;
struct va_format vaf;
- int i;
va_start(args, format);
vaf.fmt = format;
vaf.va = &args;
if (priv->registered)
- i = printk("%s%s: %s: %pV",
- level, DRV_NAME, priv->dev->name, &vaf);
+ printk("%s%s: %s: %pV",
+ level, DRV_NAME, priv->dev->name, &vaf);
else
- i = printk("%s%s: %s: Port %d: %pV",
- level, DRV_NAME, dev_name(&priv->mdev->pdev->dev),
- priv->port, &vaf);
+ printk("%s%s: %s: Port %d: %pV",
+ level, DRV_NAME, dev_name(&priv->mdev->pdev->dev),
+ priv->port, &vaf);
va_end(args);
-
- return i;
}
void mlx4_en_update_loopback_state(struct net_device *dev,
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 3de41be..03e95f7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -836,8 +836,8 @@ extern const struct ethtool_ops mlx4_en_ethtool_ops;
*/
__printf(3, 4)
-int en_print(const char *level, const struct mlx4_en_priv *priv,
- const char *format, ...);
+void en_print(const char *level, const struct mlx4_en_priv *priv,
+ const char *format, ...);
#define en_dbg(mlevel, priv, format, ...) \
do { \
^ permalink raw reply related
* [PATCH net-next] net: Change netdev_<level> logging functions to return void
From: Joe Perches @ 2014-09-22 18:10 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, LKML
No caller or macro uses the return value so make all
the functions return void.
Signed-off-by: Joe Perches <joe@perches.com>
---
This change is associated to a desire to eventually
change printk to return void.
include/linux/netdevice.h | 19 +++++++++----------
net/core/dev.c | 44 +++++++++++++++++---------------------------
2 files changed, 26 insertions(+), 37 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 28d4378..3d7ea30 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3612,22 +3612,22 @@ static inline const char *netdev_reg_state(const struct net_device *dev)
}
__printf(3, 4)
-int netdev_printk(const char *level, const struct net_device *dev,
- const char *format, ...);
+void netdev_printk(const char *level, const struct net_device *dev,
+ const char *format, ...);
__printf(2, 3)
-int netdev_emerg(const struct net_device *dev, const char *format, ...);
+void netdev_emerg(const struct net_device *dev, const char *format, ...);
__printf(2, 3)
-int netdev_alert(const struct net_device *dev, const char *format, ...);
+void netdev_alert(const struct net_device *dev, const char *format, ...);
__printf(2, 3)
-int netdev_crit(const struct net_device *dev, const char *format, ...);
+void netdev_crit(const struct net_device *dev, const char *format, ...);
__printf(2, 3)
-int netdev_err(const struct net_device *dev, const char *format, ...);
+void netdev_err(const struct net_device *dev, const char *format, ...);
__printf(2, 3)
-int netdev_warn(const struct net_device *dev, const char *format, ...);
+void netdev_warn(const struct net_device *dev, const char *format, ...);
__printf(2, 3)
-int netdev_notice(const struct net_device *dev, const char *format, ...);
+void netdev_notice(const struct net_device *dev, const char *format, ...);
__printf(2, 3)
-int netdev_info(const struct net_device *dev, const char *format, ...);
+void netdev_info(const struct net_device *dev, const char *format, ...);
#define MODULE_ALIAS_NETDEV(device) \
MODULE_ALIAS("netdev-" device)
@@ -3645,7 +3645,6 @@ do { \
({ \
if (0) \
netdev_printk(KERN_DEBUG, __dev, format, ##args); \
- 0; \
})
#endif
diff --git a/net/core/dev.c b/net/core/dev.c
index ad2522d..fa47b81 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -7074,53 +7074,45 @@ const char *netdev_drivername(const struct net_device *dev)
return empty;
}
-static int __netdev_printk(const char *level, const struct net_device *dev,
- struct va_format *vaf)
+static void __netdev_printk(const char *level, const struct net_device *dev,
+ struct va_format *vaf)
{
- int r;
-
if (dev && dev->dev.parent) {
- r = dev_printk_emit(level[1] - '0',
- dev->dev.parent,
- "%s %s %s%s: %pV",
- dev_driver_string(dev->dev.parent),
- dev_name(dev->dev.parent),
- netdev_name(dev), netdev_reg_state(dev),
- vaf);
+ dev_printk_emit(level[1] - '0',
+ dev->dev.parent,
+ "%s %s %s%s: %pV",
+ dev_driver_string(dev->dev.parent),
+ dev_name(dev->dev.parent),
+ netdev_name(dev), netdev_reg_state(dev),
+ vaf);
} else if (dev) {
- r = printk("%s%s%s: %pV", level, netdev_name(dev),
- netdev_reg_state(dev), vaf);
+ printk("%s%s%s: %pV",
+ level, netdev_name(dev), netdev_reg_state(dev), vaf);
} else {
- r = printk("%s(NULL net_device): %pV", level, vaf);
+ printk("%s(NULL net_device): %pV", level, vaf);
}
-
- return r;
}
-int netdev_printk(const char *level, const struct net_device *dev,
- const char *format, ...)
+void netdev_printk(const char *level, const struct net_device *dev,
+ const char *format, ...)
{
struct va_format vaf;
va_list args;
- int r;
va_start(args, format);
vaf.fmt = format;
vaf.va = &args;
- r = __netdev_printk(level, dev, &vaf);
+ __netdev_printk(level, dev, &vaf);
va_end(args);
-
- return r;
}
EXPORT_SYMBOL(netdev_printk);
#define define_netdev_printk_level(func, level) \
-int func(const struct net_device *dev, const char *fmt, ...) \
+void func(const struct net_device *dev, const char *fmt, ...) \
{ \
- int r; \
struct va_format vaf; \
va_list args; \
\
@@ -7129,11 +7121,9 @@ int func(const struct net_device *dev, const char *fmt, ...) \
vaf.fmt = fmt; \
vaf.va = &args; \
\
- r = __netdev_printk(level, dev, &vaf); \
+ __netdev_printk(level, dev, &vaf); \
\
va_end(args); \
- \
- return r; \
} \
EXPORT_SYMBOL(func);
^ permalink raw reply related
* Re: [PATCH net] macvlan: allow to enqueue broadcast pkt on virtual device
From: David Miller @ 2014-09-22 18:10 UTC (permalink / raw)
To: nicolas.dichtel; +Cc: netdev, herbert
In-Reply-To: <1410941288-1880-1-git-send-email-nicolas.dichtel@6wind.com>
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Wed, 17 Sep 2014 10:08:08 +0200
> Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the
> driver uses tx_queue_len of the master device as the limit of packets enqueuing.
> Problem is that virtual drivers have this value set to 0, thus all broadcast
> packets were rejected.
> Because tx_queue_len was arbitrarily chosen, I replace it with a static limit
> of 1000 (also arbitrarily chosen).
>
> CC: Herbert Xu <herbert@gondor.apana.org.au>
> Reported-by: Thibaut Collet <thibaut.collet@6wind.com>
> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com>
> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Applied and queued up for -stable.
Longer term we should come up with something a little bit nicer.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox