* Re: [PATCH 2/3] NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage
From: Mark Greer @ 2016-12-21 2:07 UTC (permalink / raw)
To: Geoff Lansberry
Cc: Rob Herring, linux-wireless, Lauro Ramos Venancio,
Aloisio Almeida Jr, Samuel Ortiz, mark.rutland-5wv7dgnIgG8,
netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Justin Bronder
In-Reply-To: <CAO7Z3WLC7J+JzmtArOc-ZUNoLGeMX6s=1XQbzwB1zx1U3yTX2Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Tue, Dec 20, 2016 at 11:13:23AM -0500, Geoff Lansberry wrote:
> On Mon, Dec 19, 2016 at 5:35 PM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> > On Thu, Dec 15, 2016 at 05:30:43PM -0500, Geoff Lansberry wrote:
> >> From: Geoff Lansberry <geoff-R+k406RtEhcAvxtiuMwx3w@public.gmane.org>
> >>
> >> ---
> >> Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 2 ++
> >> drivers/nfc/trf7970a.c | 13 ++++++++++++-
> >> 2 files changed, 14 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
> >> index 9dda879..208f045 100644
> >> --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
> >> +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
> >> @@ -21,6 +21,7 @@ Optional SoC Specific Properties:
> >> - t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum
> >> where an extra byte is returned by Read Multiple Block commands issued
> >> to Type 5 tags.
> >> +- vdd_io_1v8: Set to specify that the trf7970a io voltage should be set to 1.8V
> >
> > Use the regulator binding and provide a fixed 1.8V supply.
> >
> >> - crystal_27mhz: Set to specify that the input frequency to the trf7970a is 27.12MHz
> >>
> >>
> >> @@ -45,6 +46,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
> >> irq-status-read-quirk;
> >> en2-rf-quirk;
> >> t5t-rmb-extra-byte-quirk;
> >> + vdd_io_1v8;
> >> crystal_27mhz;
> >> status = "okay";
> >> };
>
> Rob - using the regulator binding is new to me, but I've given it a
> shot and just sent you another set of patches for your inspection.
> Please let me know if this is what you had in mind.
This is my bad. Geoff followed my example and did something similar to
'vin-voltage-override' which shouldn't have been there in the first place.
I have this fixed (I think) locally and will submit once it I'm back from
my holiday travels.
Mark
--
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH net-next] ixgbevf: fix 'Etherleak' in ixgbevf
From: Weilong Chen @ 2016-12-21 1:40 UTC (permalink / raw)
To: Alexander Duyck
Cc: Jeff Kirsher, intel-wired-lan, Netdev,
linux-kernel@vger.kernel.org, wangkefeng.wang
In-Reply-To: <CAKgT0Uf_HXtJiZJsEYm9L19cZ+deVX=E+Y8JvU5+u0=bggpAqw@mail.gmail.com>
Thanks for you explanation, it's very professional.
My test is like this:
The Nessus is deployed on a windows server, the peer is a X86_64 linux
host which run several VMs on it. The nic is Intel 82599 and SRIOV is
enabled. VFs are passthroughed to the VMs. No DPDK.
The Nessus server send small ICMP echo request packets to the VM, and
then check the reply, and report the error:
"11197 - Multiple Ethernet Driver Frame Padding Information Disclosure
(Etherleak)"
"Padding observed in one frame :
0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 57 37 28 .............W7(
0x10: 76 v
Padding observed in another frame :
0x00: 00 00 00 00 00 00 00 00 00 00 00 00 00 D3 4D 75 ..............Mu
0x10: 28 ("
I only have Nessus's windows version, so can't test on linux. Maybe the
windows server does not pad small packets to 60 bytes on the receive path.
On 2016/12/21 0:36, Alexander Duyck wrote:
> The limit of 17 is just based on the hardware. Specifically the
> olinfo field in the Tx descriptor has a minimum length of 17 has a
> requirement. The hardware itself is supposed to be capable of padding
> short frames that are supposed to be transmitted. The drivers are
> supposed to pad short frames on receive to get them up to 60 bytes.
>
> When you are seeing this issue are you sending frames from the VF to
> one of the local interfaces on the same port or to an external
> interface? Also are you receiving on another linux ixgbevf driver or
> are you receiving the packet using a different driver interface such
> as DPDK? I'm just wanting to verify this as it is possible that the
> memory leak you are seeing is on the receiver and not on the source if
> you are transmitting to a local VF or the PF as the receiver will have
> to pad the frame in such a case to get it up to 60 bytes.
>
> - Alex
>
> On Tue, Dec 20, 2016 at 3:50 AM, Weilong Chen <chenweilong@huawei.com> wrote:
>> Hi,
>>
>> Thanks for you reply.
>> We test you patch, but the problem is still there, it seems do not work.
>>
>> I'm not sure why ixgbe use the limit 17. The kenel use ETH_ZLEN (60) with
>> out FCS. A lot of drivers such as e1000 use it. Any explaination?
>>
>> Thanks.
>>
>>
>> On 2016/12/16 0:13, Alexander Duyck wrote:
>>>
>>> On Thu, Dec 15, 2016 at 3:40 AM, Weilong Chen <chenweilong@huawei.com>
>>> wrote:
>>>>
>>>> Nessus report the vf appears to leak memory in network packets.
>>>> Fix this by padding all small packets manually.
>>>>
>>>> And the CVE-2003-0001.
>>>>
>>>> https://ofirarkin.files.wordpress.com/2008/11/atstake_etherleak_report.pdf
>>>>
>>>> Signed-off-by: Weilong Chen <chenweilong@huawei.com>
>>>> ---
>>>> drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 7 +++++++
>>>> 1 file changed, 7 insertions(+)
>>>>
>>>> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>>>> b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>>>> index 6d4bef5..137a154 100644
>>>> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>>>> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
>>>> @@ -3654,6 +3654,13 @@ static int ixgbevf_xmit_frame(struct sk_buff *skb,
>>>> struct net_device *netdev)
>>>> return NETDEV_TX_OK;
>>>> }
>>>>
>>>> + /* On PCI/PCI-X HW, if packet size is less than ETH_ZLEN,
>>>> + * packets may get corrupted during padding by HW.
>>>> + * To WA this issue, pad all small packets manually.
>>>> + */
>>>> + if (eth_skb_pad(skb))
>>>> + return NETDEV_TX_OK;
>>>> +
>>>
>>>
>>> So the patch description for this probably isn't correct. It looks
>>> like the problem isn't leaking data it is the fact that the frames
>>> aren't being padded to prevent malicious events. The only issue is
>>> the patch is padding by a bit too much. I would recommend replacing
>>> this with the following from ixgbe:
>>>
>>> /*
>>> * The minimum packet size for olinfo paylen is 17 so pad the skb
>>> * in order to meet this minimum size requirement.
>>> */
>>> if (skb_put_padto(skb, 17))
>>> return NETDEV_TX_OK;
>>>
>>>
>>>> tx_ring = adapter->tx_ring[skb->queue_mapping];
>>>>
>>>> /* need: 1 descriptor per page *
>>>> PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD,
>>>> --
>>>> 1.7.12
>>>>
>>>
>>> .
>>>
>>
>
> .
>
^ permalink raw reply
* Re: [PATCH] staging: octeon: Call SET_NETDEV_DEV()
From: Florian Fainelli @ 2016-12-21 1:02 UTC (permalink / raw)
To: netdev
Cc: davem, Greg Kroah-Hartman, Aaro Koskinen, Laura Garcia Liebana,
Philippe Reynes, Asbjoern Sloth Toennesen, Jarod Wilson,
Bhaktipriya Shridhar, open list:STAGING SUBSYSTEM, open list
In-Reply-To: <20161215011326.8852-1-f.fainelli@gmail.com>
On 12/14/2016 05:13 PM, Florian Fainelli wrote:
> The Octeon driver calls into PHYLIB which now checks for
> net_device->dev.parent, so make sure we do set it before calling into
> any MDIO/PHYLIB related function.
>
> Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner")
> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Greg, David, since this is a fix for a regression introduced in the net
tree, it may make sense that David take it via his tree.
Thanks
> ---
> drivers/staging/octeon/ethernet.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
> index 8130dfe89745..4971aa54756a 100644
> --- a/drivers/staging/octeon/ethernet.c
> +++ b/drivers/staging/octeon/ethernet.c
> @@ -770,6 +770,7 @@ static int cvm_oct_probe(struct platform_device *pdev)
> /* Initialize the device private structure. */
> struct octeon_ethernet *priv = netdev_priv(dev);
>
> + SET_NETDEV_DEV(dev, &pdev->dev);
> dev->netdev_ops = &cvm_oct_pow_netdev_ops;
> priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED;
> priv->port = CVMX_PIP_NUM_INPUT_PORTS;
> @@ -816,6 +817,7 @@ static int cvm_oct_probe(struct platform_device *pdev)
> }
>
> /* Initialize the device private structure. */
> + SET_NETDEV_DEV(dev, &pdev->dev);
> priv = netdev_priv(dev);
> priv->netdev = dev;
> priv->of_node = cvm_oct_node_for_port(pip, interface,
>
--
Florian
^ permalink raw reply
* Re: [PATCH] phy: check if parent device is NULL
From: Florian Fainelli @ 2016-12-21 0:33 UTC (permalink / raw)
To: Ruslan Babayev, netdev
In-Reply-To: <87oa06upl5.fsf@babayev.com>
On 12/20/2016 03:51 PM, Ruslan Babayev wrote:
> Fixes a crash observed on Octeon.
>
> Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
> Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a
> different owner")
Assuming you saw this with the staging Octeon driver, a fix has already
been submitted:
https://lkml.org/lkml/2016/12/14/756
If this is with a different driver, I would rather we fix it in a
similar way that the fix proposed above.
Thanks
> ---
> drivers/net/phy/phy_device.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 9c06f8028f0c..043328b85643 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -905,7 +905,8 @@ EXPORT_SYMBOL(phy_attached_print);
> int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
> u32 flags, phy_interface_t interface)
> {
> - struct module *ndev_owner = dev->dev.parent->driver->owner;
> + struct device *parent = dev->dev.parent;
> + struct module *ndev_owner = parent ? parent->driver->owner : NULL;
> struct mii_bus *bus = phydev->mdio.bus;
> struct device *d = &phydev->mdio.dev;
> int err;
>
--
Florian
^ permalink raw reply
* Re: [PATCH net-next 00/10] netcp: enhancements and minor fixes
From: David Miller @ 2016-12-21 0:03 UTC (permalink / raw)
To: m-karicheri2
Cc: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
The net-next tree is not open, do not resubmit this series until it
is open again.
Thanks.
^ permalink raw reply
* Re: HalfSipHash Acceptable Usage
From: Eric Dumazet @ 2016-12-20 23:55 UTC (permalink / raw)
To: Theodore Ts'o
Cc: Jason A. Donenfeld, Jean-Philippe Aumasson, Hannes Frederic Sowa,
LKML, Eric Biggers, Daniel J . Bernstein, David Laight,
David Miller, Andi Kleen, George Spelvin, kernel-hardening,
Andy Lutomirski, Linux Crypto Mailing List, Tom Herbert,
Vegard Nossum, Netdev, Linus Torvalds
In-Reply-To: <20161220213636.tiqj2o4uupasr4aj@thunk.org>
On Tue, 2016-12-20 at 16:36 -0500, Theodore Ts'o wrote:
> On Mon, Dec 19, 2016 at 06:32:44PM +0100, Jason A. Donenfeld wrote:
> > 1) Anything that requires actual long-term security will use
> > SipHash2-4, with the 64-bit output and the 128-bit key. This includes
> > things like TCP sequence numbers. This seems pretty uncontroversial to
> > me. Seem okay to you?
>
> Um, why do TCP sequence numbers need long-term security? So long as
> you rekey every 5 minutes or so, TCP sequence numbers don't need any
> more security than that, since even if you break the key used to
> generate initial sequence numbers seven a minute or two later, any
> pending TCP connections will have timed out long before.
>
> See the security analysis done in RFC 6528[1], where among other
> things, it points out why MD5 is acceptable with periodic rekeying,
> although there is the concern that this could break certain hueristics
> used when establishing new connections during the TIME-WAIT state.
>
> [1] https://tools.ietf.org/html/rfc6528
We do not use rekeying for TCP ISN, not anymore after commit
6e5714eaf77d79ae1 (where we switched from MD4 to MD5 )
It might hurt some common cases and I do not believe it is mandated by a
current (ie not obsolete) RFC.
Our clock has a 64 ns resolution and 274 second period (commit
9b42c336d0641) (compared to 4 usec one in RFC 6528)
I do not see why SipHash, if faster than MD5 and more secure, would be a
problem.
Same for syncookies.
BTW, we probably should add a ratelimit on SYNACK retransmits,
because it seems that attackers understood linux kernels resist to
synfloods, and they (the bad guys) use reflection attacks.
^ permalink raw reply
* [PATCH] phy: check if parent device is NULL
From: Ruslan Babayev @ 2016-12-20 23:51 UTC (permalink / raw)
To: netdev; +Cc: f.fainelli
Fixes a crash observed on Octeon.
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a
different owner")
---
drivers/net/phy/phy_device.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9c06f8028f0c..043328b85643 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -905,7 +905,8 @@ EXPORT_SYMBOL(phy_attached_print);
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface)
{
- struct module *ndev_owner = dev->dev.parent->driver->owner;
+ struct device *parent = dev->dev.parent;
+ struct module *ndev_owner = parent ? parent->driver->owner : NULL;
struct mii_bus *bus = phydev->mdio.bus;
struct device *d = &phydev->mdio.dev;
int err;
--
2.7.4
^ permalink raw reply related
* Re: HalfSipHash Acceptable Usage
From: George Spelvin @ 2016-12-20 23:07 UTC (permalink / raw)
To: Jason, tytso
Cc: ak, davem, David.Laight, djb, ebiggers3, hannes,
jeanphilippe.aumasson, kernel-hardening, linux-crypto,
linux-kernel, linux, luto, netdev, tom, torvalds, vegard.nossum
In-Reply-To: <20161220213636.tiqj2o4uupasr4aj@thunk.org>
Theodore Ts'o wrote:
> On Mon, Dec 19, 2016 at 06:32:44PM +0100, Jason A. Donenfeld wrote:
>> 1) Anything that requires actual long-term security will use
>> SipHash2-4, with the 64-bit output and the 128-bit key. This includes
>> things like TCP sequence numbers. This seems pretty uncontroversial to
>> me. Seem okay to you?
> Um, why do TCP sequence numbers need long-term security? So long as
> you rekey every 5 minutes or so, TCP sequence numbers don't need any
> more security than that, since even if you break the key used to
> generate initial sequence numbers seven a minute or two later, any
> pending TCP connections will have timed out long before.
>
> See the security analysis done in RFC 6528[1], where among other
> things, it points out why MD5 is acceptable with periodic rekeying,
> although there is the concern that this could break certain hueristics
> used when establishing new connections during the TIME-WAIT state.
Because we don't rekey TCP sequence numbers, ever. See commit
6e5714eaf77d79ae1c8b47e3e040ff5411b717ec
To rekey them requires dividing the sequence number base into a "random"
part and some "generation" msbits. While we can do better than the
previous 8+24 split (I'd suggest 4+28 or 3+29), only 2 is tricks, and
1 generation bit isn't enough.
So while it helps in the long term, it reduces the security offered by
the random part in the short term. (If I know 4 bits of your ISN,
I only need to send 256 MB to hit your TCP window.)
At the time, I objected, and suggested doing two hashes, with a fixed
32-bit base plus a split rekeyed portion, but that was vetoed on the
grounds of performance.
On further consideration, the fixed base doesn't help much.
(Details below for anyone that cares.)
Suppose we let the TCP initial sequence number be:
(Hash(<srcIP,dstIP,srcPort,dstPort>, fixed_key) & 0xffffffff) +
(i << 28) + (Hash(<srcIP,dstIP,srcPort,dstPort>, key[i]) & 0x0fffffff) +
(current_time_in_nanoseconds / 64)
It's not hugely difficult to mount an effective attack against a
64-bit fixed_key.
As an attacker, I can ask the target to send me these numbers for dstPort
values i control and other values I know. I can (with high probability)
detect the large jumps when the generation changes, so I can make a
significant number of queries with the same generation. After 23-ish
queries, I have enough information to identify a 64-bit fixed_key.
I don't know the current generation counter "i", but I know it's the
same for all my queries, so for any two queries, the maximum difference
between the 28-bit hash values is 29 bits. (We can also add a small
margin to allow for timeing uncertainty, but that's even less.)
So if I guess a fixed key, hash my known plaintexts with that guess,
subtract the ciphertexts from the observed sequence numbers, and the
difference between the remaining (unknown) 28-bit hash values plus
timestamps exceeds what's possible, my guess is wrong.
I can then repeat with additional known plaintexts, reducing the space
of admissible keys by about 3 bits each time.
Assuming I can rent GPU horsepower from a bitcoin miner to do this in a
reasonable period of time, after 22 known plaintext differences, I have
uniquely identified the key.
Of course, in practice I'd do is a first pass with maybe 6 plaintexts
on the GPU, and then deal with the candidates found in a second pass.
But either way, it's about 2.3 SipHash evaluations per key tested.
As I noted earlier, a bitcoin blockchain block, worth 25 bitcoins,
currently costs 2^71 evaluations of SHA-2 (2^70 evaluations of double
SHA-2), and that's accomplished every 10 minutes, this is definitely
practical.
^ permalink raw reply
* [PATCH] net: qcom/emac: add ethtool support
From: Timur Tabi @ 2016-12-20 22:32 UTC (permalink / raw)
To: David Miller, Florian Fainelli, netdev, Christopher Covington,
Alok Chauhan
Add support for some ethtool methods: get/set link settings, get/set
message level, get statistics, get link status, and restart
autonegotiation.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
---
drivers/net/ethernet/qualcomm/emac/Makefile | 2 +-
drivers/net/ethernet/qualcomm/emac/emac-ethtool.c | 156 ++++++++++++++++++++++
drivers/net/ethernet/qualcomm/emac/emac.c | 51 ++++---
drivers/net/ethernet/qualcomm/emac/emac.h | 3 +
4 files changed, 191 insertions(+), 21 deletions(-)
create mode 100644 drivers/net/ethernet/qualcomm/emac/emac-ethtool.c
diff --git a/drivers/net/ethernet/qualcomm/emac/Makefile b/drivers/net/ethernet/qualcomm/emac/Makefile
index 7a66879..fc57ced 100644
--- a/drivers/net/ethernet/qualcomm/emac/Makefile
+++ b/drivers/net/ethernet/qualcomm/emac/Makefile
@@ -4,6 +4,6 @@
obj-$(CONFIG_QCOM_EMAC) += qcom-emac.o
-qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o \
+qcom-emac-objs := emac.o emac-mac.o emac-phy.o emac-sgmii.o emac-ethtool.o \
emac-sgmii-fsm9900.o emac-sgmii-qdf2432.o \
emac-sgmii-qdf2400.o
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c b/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c
new file mode 100644
index 0000000..6de5152
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c
@@ -0,0 +1,156 @@
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include "emac.h"
+
+static const char * const emac_ethtool_stat_strings[] = {
+ "rx_ok",
+ "rx_bcast",
+ "rx_mcast",
+ "rx_pause",
+ "rx_ctrl",
+ "rx_fcs_err",
+ "rx_len_err",
+ "rx_byte_cnt",
+ "rx_runt",
+ "rx_frag",
+ "rx_sz_64",
+ "rx_sz_65_127",
+ "rx_sz_128_255",
+ "rx_sz_256_511",
+ "rx_sz_512_1023",
+ "rx_sz_1024_1518",
+ "rx_sz_1519_max",
+ "rx_sz_ov",
+ "rx_rxf_ov",
+ "rx_align_err",
+ "rx_bcast_byte_cnt",
+ "rx_mcast_byte_cnt",
+ "rx_err_addr",
+ "rx_crc_align",
+ "rx_jabbers",
+ "tx_ok",
+ "tx_bcast",
+ "tx_mcast",
+ "tx_pause",
+ "tx_exc_defer",
+ "tx_ctrl",
+ "tx_defer",
+ "tx_byte_cnt",
+ "tx_sz_64",
+ "tx_sz_65_127",
+ "tx_sz_128_255",
+ "tx_sz_256_511",
+ "tx_sz_512_1023",
+ "tx_sz_1024_1518",
+ "tx_sz_1519_max",
+ "tx_1_col",
+ "tx_2_col",
+ "tx_late_col",
+ "tx_abort_col",
+ "tx_underrun",
+ "tx_rd_eop",
+ "tx_len_err",
+ "tx_trunc",
+ "tx_bcast_byte",
+ "tx_mcast_byte",
+ "tx_col",
+};
+
+#define EMAC_STATS_LEN ARRAY_SIZE(emac_ethtool_stat_strings)
+
+static u32 emac_get_msglevel(struct net_device *netdev)
+{
+ struct emac_adapter *adpt = netdev_priv(netdev);
+
+ return adpt->msg_enable;
+}
+
+static void emac_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct emac_adapter *adpt = netdev_priv(netdev);
+
+ adpt->msg_enable = data;
+}
+
+static int emac_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return EMAC_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void emac_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ unsigned int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < EMAC_STATS_LEN; i++) {
+ strlcpy(data, emac_ethtool_stat_strings[i],
+ ETH_GSTRING_LEN);
+ data += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static void emac_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct emac_adapter *adpt = netdev_priv(netdev);
+
+ spin_lock(&adpt->stats.lock);
+
+ emac_update_hw_stats(adpt);
+ memcpy(data, &adpt->stats, EMAC_STATS_LEN * sizeof(u64));
+
+ spin_unlock(&adpt->stats.lock);
+}
+
+static int emac_nway_reset(struct net_device *netdev)
+{
+ struct phy_device *phydev = netdev->phydev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return genphy_restart_aneg(phydev);
+}
+
+static const struct ethtool_ops emac_ethtool_ops = {
+ .get_link_ksettings = phy_ethtool_get_link_ksettings,
+ .set_link_ksettings = phy_ethtool_set_link_ksettings,
+
+ .get_msglevel = emac_get_msglevel,
+ .set_msglevel = emac_set_msglevel,
+
+ .get_sset_count = emac_get_sset_count,
+ .get_strings = emac_get_strings,
+ .get_ethtool_stats = emac_get_ethtool_stats,
+
+ .nway_reset = emac_nway_reset,
+
+ .get_link = ethtool_op_get_link,
+};
+
+void emac_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &emac_ethtool_ops;
+}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c
index 422289c..1ab4478 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -311,45 +311,55 @@ static int emac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
return phy_mii_ioctl(netdev->phydev, ifr, cmd);
}
-/* Provide network statistics info for the interface */
-static struct rtnl_link_stats64 *emac_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64 *net_stats)
+/**
+ * emac_update_hw_stats - read the EMAC stat registers
+ *
+ * Reads the stats registers and write the values to adpt->stats.
+ *
+ * adpt->stats.lock must be held while calling this function.
+ */
+void emac_update_hw_stats(struct emac_adapter *adpt)
{
- struct emac_adapter *adpt = netdev_priv(netdev);
- unsigned int addr = REG_MAC_RX_STATUS_BIN;
struct emac_stats *stats = &adpt->stats;
u64 *stats_itr = &adpt->stats.rx_ok;
- u32 val;
-
- spin_lock(&stats->lock);
+ void __iomem *base = adpt->base;
+ unsigned int addr;
+ addr = REG_MAC_RX_STATUS_BIN;
while (addr <= REG_MAC_RX_STATUS_END) {
- val = readl_relaxed(adpt->base + addr);
- *stats_itr += val;
+ *stats_itr += readl_relaxed(base + addr);
stats_itr++;
addr += sizeof(u32);
}
/* additional rx status */
- val = readl_relaxed(adpt->base + EMAC_RXMAC_STATC_REG23);
- adpt->stats.rx_crc_align += val;
- val = readl_relaxed(adpt->base + EMAC_RXMAC_STATC_REG24);
- adpt->stats.rx_jabbers += val;
+ stats->rx_crc_align += readl_relaxed(base + EMAC_RXMAC_STATC_REG23);
+ stats->rx_jabbers += readl_relaxed(base + EMAC_RXMAC_STATC_REG24);
/* update tx status */
addr = REG_MAC_TX_STATUS_BIN;
- stats_itr = &adpt->stats.tx_ok;
+ stats_itr = &stats->tx_ok;
while (addr <= REG_MAC_TX_STATUS_END) {
- val = readl_relaxed(adpt->base + addr);
- *stats_itr += val;
- ++stats_itr;
+ *stats_itr += readl_relaxed(base + addr);
+ stats_itr++;
addr += sizeof(u32);
}
/* additional tx status */
- val = readl_relaxed(adpt->base + EMAC_TXMAC_STATC_REG25);
- adpt->stats.tx_col += val;
+ stats->tx_col += readl_relaxed(base + EMAC_TXMAC_STATC_REG25);
+}
+
+/* Provide network statistics info for the interface */
+static struct rtnl_link_stats64 *
+emac_get_stats64(struct net_device *netdev, struct rtnl_link_stats64 *net_stats)
+{
+ struct emac_adapter *adpt = netdev_priv(netdev);
+ struct emac_stats *stats = &adpt->stats;
+
+ spin_lock(&stats->lock);
+
+ emac_update_hw_stats(adpt);
/* return parsed statistics */
net_stats->rx_packets = stats->rx_ok;
@@ -620,6 +630,7 @@ static int emac_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, netdev);
SET_NETDEV_DEV(netdev, &pdev->dev);
+ emac_set_ethtool_ops(netdev);
adpt = netdev_priv(netdev);
adpt->netdev = netdev;
diff --git a/drivers/net/ethernet/qualcomm/emac/emac.h b/drivers/net/ethernet/qualcomm/emac/emac.h
index 0c76e6c..4b8483c 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac.h
+++ b/drivers/net/ethernet/qualcomm/emac/emac.h
@@ -332,4 +332,7 @@ struct emac_adapter {
void emac_reg_update32(void __iomem *addr, u32 mask, u32 val);
irqreturn_t emac_isr(int irq, void *data);
+void emac_set_ethtool_ops(struct net_device *netdev);
+void emac_update_hw_stats(struct emac_adapter *adpt);
+
#endif /* _EMAC_H_ */
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related
* [PATCH v5] net: dummy: Introduce dummy virtual functions
From: Phil Sutter @ 2016-12-20 22:26 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Sabrina Dubroca
The idea for this was born when testing VF support in iproute2 which was
impeded by hardware requirements. In fact, not every VF-capable hardware
driver implements all netdev ops, so testing the interface is still hard
to do even with a well-sorted hardware shelf.
To overcome this and allow for testing the user-kernel interface, this
patch allows to turn dummy into a PF with a configurable amount of VFs.
Due to the assumption that all PFs are PCI devices, this implementation
is not completely straightforward: In order to allow for
rtnl_fill_ifinfo() to see the dummy VFs, a fake PCI parent device is
attached to the dummy netdev. This has to happen at the right spot so
register_netdevice() does not get confused. This patch abuses
ndo_fix_features callback for that. In ndo_uninit callback, the fake
parent is removed again for the same purpose.
Joint work with Sabrina Dubroca.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
---
Changes since v4:
- Initialize pci_pdev.sriov at runtime - older gcc versions don't allow
initializing fields of anonymous unions at declaration time.
- Rebased onto current net-next/master.
Changes since v3:
- Changed type of vf_mac field from unsigned char to u8.
- Column-aligned structs' field names.
Changes since v2:
- Fixed oops on reboot (need to initialize parent device mutex).
- Got rid of potential mem leak noticed by Eric Dumazet.
- Dropped stray newline insertion.
Changes since v1:
- Fixed issues reported by kbuild test robot:
- pci_dev->sriov is only present if CONFIG_PCI_ATS is active.
- pci_bus_type does not exist if CONFIG_PCI is not defined.
---
drivers/net/dummy.c | 205 +++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 203 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 6421835f11b7e..7f8d8598bbbfe 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -34,6 +34,8 @@
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include "../pci/pci.h" /* for struct pci_sriov */
#include <linux/rtnetlink.h>
#include <net/rtnetlink.h>
#include <linux/u64_stats_sync.h>
@@ -42,6 +44,34 @@
#define DRV_VERSION "1.0"
static int numdummies = 1;
+static int num_vfs;
+
+static struct pci_sriov pdev_sriov;
+
+static struct pci_dev pci_pdev = {
+ .is_physfn = 0,
+#ifdef CONFIG_PCI
+ .dev.bus = &pci_bus_type,
+#endif
+};
+
+struct vf_data_storage {
+ u8 vf_mac[ETH_ALEN];
+ u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+ u16 pf_qos;
+ __be16 vlan_proto;
+ u16 min_tx_rate;
+ u16 max_tx_rate;
+ u8 spoofchk_enabled;
+ bool rss_query_enabled;
+ u8 trusted;
+ int link_state;
+};
+
+struct dummy_priv {
+ int num_vfs;
+ struct vf_data_storage *vfinfo;
+};
/* fake multicast ability */
static void set_multicast_list(struct net_device *dev)
@@ -91,15 +121,31 @@ static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
static int dummy_dev_init(struct net_device *dev)
{
+ struct dummy_priv *priv = netdev_priv(dev);
+
dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
if (!dev->dstats)
return -ENOMEM;
+ priv->num_vfs = num_vfs;
+ priv->vfinfo = NULL;
+
+ if (!num_vfs)
+ return 0;
+
+ priv->vfinfo = kcalloc(num_vfs, sizeof(struct vf_data_storage),
+ GFP_KERNEL);
+ if (!priv->vfinfo) {
+ free_percpu(dev->dstats);
+ return -ENOMEM;
+ }
+
return 0;
}
static void dummy_dev_uninit(struct net_device *dev)
{
+ dev->dev.parent = NULL;
free_percpu(dev->dstats);
}
@@ -112,6 +158,137 @@ static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
return 0;
}
+/* fake, just to set fake PCI parent after netdev_register_kobject() */
+static netdev_features_t dummy_fix_features(struct net_device *dev,
+ netdev_features_t features)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (priv->num_vfs) {
+#ifdef CONFIG_PCI_ATS
+ pci_pdev.sriov = &pdev_sriov;
+#endif
+ dev->dev.parent = &pci_pdev.dev;
+ if (!pci_pdev.is_physfn) {
+ mutex_init(&pci_pdev.dev.mutex);
+ pci_pdev.is_physfn = 1;
+ }
+ }
+
+ return features;
+}
+
+static int dummy_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (!is_valid_ether_addr(mac) || (vf >= priv->num_vfs))
+ return -EINVAL;
+
+ memcpy(priv->vfinfo[vf].vf_mac, mac, ETH_ALEN);
+
+ return 0;
+}
+
+static int dummy_set_vf_vlan(struct net_device *dev, int vf,
+ u16 vlan, u8 qos, __be16 vlan_proto)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if ((vf >= priv->num_vfs) || (vlan > 4095) || (qos > 7))
+ return -EINVAL;
+
+ priv->vfinfo[vf].pf_vlan = vlan;
+ priv->vfinfo[vf].pf_qos = qos;
+ priv->vfinfo[vf].vlan_proto = vlan_proto;
+
+ return 0;
+}
+
+static int dummy_set_vf_rate(struct net_device *dev, int vf, int min, int max)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (vf >= priv->num_vfs)
+ return -EINVAL;
+
+ priv->vfinfo[vf].min_tx_rate = min;
+ priv->vfinfo[vf].max_tx_rate = max;
+
+ return 0;
+}
+
+static int dummy_set_vf_spoofchk(struct net_device *dev, int vf, bool val)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (vf >= priv->num_vfs)
+ return -EINVAL;
+
+ priv->vfinfo[vf].spoofchk_enabled = val;
+
+ return 0;
+}
+
+static int dummy_set_vf_rss_query_en(struct net_device *dev, int vf, bool val)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (vf >= priv->num_vfs)
+ return -EINVAL;
+
+ priv->vfinfo[vf].rss_query_enabled = val;
+
+ return 0;
+}
+
+static int dummy_set_vf_trust(struct net_device *dev, int vf, bool val)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (vf >= priv->num_vfs)
+ return -EINVAL;
+
+ priv->vfinfo[vf].trusted = val;
+
+ return 0;
+}
+
+static int dummy_get_vf_config(struct net_device *dev,
+ int vf, struct ifla_vf_info *ivi)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (vf >= priv->num_vfs)
+ return -EINVAL;
+
+ ivi->vf = vf;
+ memcpy(&ivi->mac, priv->vfinfo[vf].vf_mac, ETH_ALEN);
+ ivi->vlan = priv->vfinfo[vf].pf_vlan;
+ ivi->qos = priv->vfinfo[vf].pf_qos;
+ ivi->spoofchk = priv->vfinfo[vf].spoofchk_enabled;
+ ivi->linkstate = priv->vfinfo[vf].link_state;
+ ivi->min_tx_rate = priv->vfinfo[vf].min_tx_rate;
+ ivi->max_tx_rate = priv->vfinfo[vf].max_tx_rate;
+ ivi->rss_query_en = priv->vfinfo[vf].rss_query_enabled;
+ ivi->trusted = priv->vfinfo[vf].trusted;
+ ivi->vlan_proto = priv->vfinfo[vf].vlan_proto;
+
+ return 0;
+}
+
+static int dummy_set_vf_link_state(struct net_device *dev, int vf, int state)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ if (vf >= priv->num_vfs)
+ return -EINVAL;
+
+ priv->vfinfo[vf].link_state = state;
+
+ return 0;
+}
+
static const struct net_device_ops dummy_netdev_ops = {
.ndo_init = dummy_dev_init,
.ndo_uninit = dummy_dev_uninit,
@@ -121,6 +298,15 @@ static const struct net_device_ops dummy_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
.ndo_get_stats64 = dummy_get_stats64,
.ndo_change_carrier = dummy_change_carrier,
+ .ndo_fix_features = dummy_fix_features,
+ .ndo_set_vf_mac = dummy_set_vf_mac,
+ .ndo_set_vf_vlan = dummy_set_vf_vlan,
+ .ndo_set_vf_rate = dummy_set_vf_rate,
+ .ndo_set_vf_spoofchk = dummy_set_vf_spoofchk,
+ .ndo_set_vf_trust = dummy_set_vf_trust,
+ .ndo_get_vf_config = dummy_get_vf_config,
+ .ndo_set_vf_link_state = dummy_set_vf_link_state,
+ .ndo_set_vf_rss_query_en = dummy_set_vf_rss_query_en,
};
static void dummy_get_drvinfo(struct net_device *dev,
@@ -134,6 +320,14 @@ static const struct ethtool_ops dummy_ethtool_ops = {
.get_drvinfo = dummy_get_drvinfo,
};
+static void dummy_free_netdev(struct net_device *dev)
+{
+ struct dummy_priv *priv = netdev_priv(dev);
+
+ kfree(priv->vfinfo);
+ free_netdev(dev);
+}
+
static void dummy_setup(struct net_device *dev)
{
ether_setup(dev);
@@ -141,7 +335,7 @@ static void dummy_setup(struct net_device *dev)
/* Initialize the device structure. */
dev->netdev_ops = &dummy_netdev_ops;
dev->ethtool_ops = &dummy_ethtool_ops;
- dev->destructor = free_netdev;
+ dev->destructor = dummy_free_netdev;
/* Fill in device structure with ethernet-generic values. */
dev->flags |= IFF_NOARP;
@@ -172,6 +366,7 @@ static int dummy_validate(struct nlattr *tb[], struct nlattr *data[])
static struct rtnl_link_ops dummy_link_ops __read_mostly = {
.kind = DRV_NAME,
+ .priv_size = sizeof(struct dummy_priv),
.setup = dummy_setup,
.validate = dummy_validate,
};
@@ -180,12 +375,16 @@ static struct rtnl_link_ops dummy_link_ops __read_mostly = {
module_param(numdummies, int, 0);
MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
+module_param(num_vfs, int, 0);
+MODULE_PARM_DESC(num_vfs, "Number of dummy VFs per dummy device");
+
static int __init dummy_init_one(void)
{
struct net_device *dev_dummy;
int err;
- dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_UNKNOWN, dummy_setup);
+ dev_dummy = alloc_netdev(sizeof(struct dummy_priv),
+ "dummy%d", NET_NAME_UNKNOWN, dummy_setup);
if (!dev_dummy)
return -ENOMEM;
@@ -204,6 +403,8 @@ static int __init dummy_init_module(void)
{
int i, err = 0;
+ pdev_sriov.num_VFs = num_vfs;
+
rtnl_lock();
err = __rtnl_link_register(&dummy_link_ops);
if (err < 0)
--
2.11.0
^ permalink raw reply related
* [PATCH 2/2] net: sfc: falcon: use new api ethtool_{get|set}_link_ksettings
From: Philippe Reynes @ 2016-12-20 22:24 UTC (permalink / raw)
To: linux-net-drivers, ecree, bkenward, davem, andrew
Cc: netdev, linux-kernel, Philippe Reynes
In-Reply-To: <1482272667-1206-1-git-send-email-tremyfr@gmail.com>
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/sfc/falcon/efx.c | 2 +-
drivers/net/ethernet/sfc/falcon/ethtool.c | 35 ++++++++++++-------
drivers/net/ethernet/sfc/falcon/mdio_10g.c | 44 +++++++++++++++---------
drivers/net/ethernet/sfc/falcon/mdio_10g.h | 3 +-
drivers/net/ethernet/sfc/falcon/net_driver.h | 12 +++---
drivers/net/ethernet/sfc/falcon/qt202x_phy.c | 9 +++--
drivers/net/ethernet/sfc/falcon/tenxpress.c | 22 ++++++------
drivers/net/ethernet/sfc/falcon/txc43128_phy.c | 9 +++--
8 files changed, 80 insertions(+), 56 deletions(-)
diff --git a/drivers/net/ethernet/sfc/falcon/efx.c b/drivers/net/ethernet/sfc/falcon/efx.c
index 5c5cb3c..438ef9e 100644
--- a/drivers/net/ethernet/sfc/falcon/efx.c
+++ b/drivers/net/ethernet/sfc/falcon/efx.c
@@ -986,7 +986,7 @@ void ef4_mac_reconfigure(struct ef4_nic *efx)
/* Push loopback/power/transmit disable settings to the PHY, and reconfigure
* the MAC appropriately. All other PHY configuration changes are pushed
- * through phy_op->set_settings(), and pushed asynchronously to the MAC
+ * through phy_op->set_link_ksettings(), and pushed asynchronously to the MAC
* through ef4_monitor().
*
* Callers must hold the mac_lock
diff --git a/drivers/net/ethernet/sfc/falcon/ethtool.c b/drivers/net/ethernet/sfc/falcon/ethtool.c
index 8e1929b..659ece7 100644
--- a/drivers/net/ethernet/sfc/falcon/ethtool.c
+++ b/drivers/net/ethernet/sfc/falcon/ethtool.c
@@ -115,44 +115,53 @@ static int ef4_ethtool_phys_id(struct net_device *net_dev,
}
/* This must be called with rtnl_lock held. */
-static int ef4_ethtool_get_settings(struct net_device *net_dev,
- struct ethtool_cmd *ecmd)
+static int
+ef4_ethtool_get_link_ksettings(struct net_device *net_dev,
+ struct ethtool_link_ksettings *cmd)
{
struct ef4_nic *efx = netdev_priv(net_dev);
struct ef4_link_state *link_state = &efx->link_state;
+ u32 supported;
+
+ ethtool_convert_link_mode_to_legacy_u32(&supported,
+ cmd->link_modes.supported);
mutex_lock(&efx->mac_lock);
- efx->phy_op->get_settings(efx, ecmd);
+ efx->phy_op->get_link_ksettings(efx, cmd);
mutex_unlock(&efx->mac_lock);
/* Both MACs support pause frames (bidirectional and respond-only) */
- ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
if (LOOPBACK_INTERNAL(efx)) {
- ethtool_cmd_speed_set(ecmd, link_state->speed);
- ecmd->duplex = link_state->fd ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->base.speed = link_state->speed;
+ cmd->base.duplex = link_state->fd ? DUPLEX_FULL : DUPLEX_HALF;
}
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+
return 0;
}
/* This must be called with rtnl_lock held. */
-static int ef4_ethtool_set_settings(struct net_device *net_dev,
- struct ethtool_cmd *ecmd)
+static int
+ef4_ethtool_set_link_ksettings(struct net_device *net_dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct ef4_nic *efx = netdev_priv(net_dev);
int rc;
/* GMAC does not support 1000Mbps HD */
- if ((ethtool_cmd_speed(ecmd) == SPEED_1000) &&
- (ecmd->duplex != DUPLEX_FULL)) {
+ if ((cmd->base.speed == SPEED_1000) &&
+ (cmd->base.duplex != DUPLEX_FULL)) {
netif_dbg(efx, drv, efx->net_dev,
"rejecting unsupported 1000Mbps HD setting\n");
return -EINVAL;
}
mutex_lock(&efx->mac_lock);
- rc = efx->phy_op->set_settings(efx, ecmd);
+ rc = efx->phy_op->set_link_ksettings(efx, cmd);
mutex_unlock(&efx->mac_lock);
return rc;
}
@@ -1310,8 +1319,6 @@ static int ef4_ethtool_get_module_info(struct net_device *net_dev,
}
const struct ethtool_ops ef4_ethtool_ops = {
- .get_settings = ef4_ethtool_get_settings,
- .set_settings = ef4_ethtool_set_settings,
.get_drvinfo = ef4_ethtool_get_drvinfo,
.get_regs_len = ef4_ethtool_get_regs_len,
.get_regs = ef4_ethtool_get_regs,
@@ -1340,4 +1347,6 @@ static int ef4_ethtool_get_module_info(struct net_device *net_dev,
.set_rxfh = ef4_ethtool_set_rxfh,
.get_module_info = ef4_ethtool_get_module_info,
.get_module_eeprom = ef4_ethtool_get_module_eeprom,
+ .get_link_ksettings = ef4_ethtool_get_link_ksettings,
+ .set_link_ksettings = ef4_ethtool_set_link_ksettings,
};
diff --git a/drivers/net/ethernet/sfc/falcon/mdio_10g.c b/drivers/net/ethernet/sfc/falcon/mdio_10g.c
index e7d7c09..ee0713f 100644
--- a/drivers/net/ethernet/sfc/falcon/mdio_10g.c
+++ b/drivers/net/ethernet/sfc/falcon/mdio_10g.c
@@ -226,33 +226,45 @@ void ef4_mdio_set_mmds_lpower(struct ef4_nic *efx,
}
/**
- * ef4_mdio_set_settings - Set (some of) the PHY settings over MDIO.
+ * ef4_mdio_set_link_ksettings - Set (some of) the PHY settings over MDIO.
* @efx: Efx NIC
- * @ecmd: New settings
+ * @cmd: New settings
*/
-int ef4_mdio_set_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd)
+int ef4_mdio_set_link_ksettings(struct ef4_nic *efx,
+ const struct ethtool_link_ksettings *cmd)
{
- struct ethtool_cmd prev = { .cmd = ETHTOOL_GSET };
-
- efx->phy_op->get_settings(efx, &prev);
-
- if (ecmd->advertising == prev.advertising &&
- ethtool_cmd_speed(ecmd) == ethtool_cmd_speed(&prev) &&
- ecmd->duplex == prev.duplex &&
- ecmd->port == prev.port &&
- ecmd->autoneg == prev.autoneg)
+ struct ethtool_link_ksettings prev = {
+ .base.cmd = ETHTOOL_GLINKSETTINGS
+ };
+ u32 prev_advertising, advertising;
+ u32 prev_supported;
+
+ efx->phy_op->get_link_ksettings(efx, &prev);
+
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
+ ethtool_convert_link_mode_to_legacy_u32(&prev_advertising,
+ prev.link_modes.advertising);
+ ethtool_convert_link_mode_to_legacy_u32(&prev_supported,
+ prev.link_modes.supported);
+
+ if (advertising == prev_advertising &&
+ cmd->base.speed == prev.base.speed &&
+ cmd->base.duplex == prev.base.duplex &&
+ cmd->base.port == prev.base.port &&
+ cmd->base.autoneg == prev.base.autoneg)
return 0;
/* We can only change these settings for -T PHYs */
- if (prev.port != PORT_TP || ecmd->port != PORT_TP)
+ if (prev.base.port != PORT_TP || cmd->base.port != PORT_TP)
return -EINVAL;
/* Check that PHY supports these settings */
- if (!ecmd->autoneg ||
- (ecmd->advertising | SUPPORTED_Autoneg) & ~prev.supported)
+ if (!cmd->base.autoneg ||
+ (advertising | SUPPORTED_Autoneg) & ~prev_supported)
return -EINVAL;
- ef4_link_set_advertising(efx, ecmd->advertising | ADVERTISED_Autoneg);
+ ef4_link_set_advertising(efx, advertising | ADVERTISED_Autoneg);
ef4_mdio_an_reconfigure(efx);
return 0;
}
diff --git a/drivers/net/ethernet/sfc/falcon/mdio_10g.h b/drivers/net/ethernet/sfc/falcon/mdio_10g.h
index 885cf7a..53cb5cc 100644
--- a/drivers/net/ethernet/sfc/falcon/mdio_10g.h
+++ b/drivers/net/ethernet/sfc/falcon/mdio_10g.h
@@ -83,7 +83,8 @@ void ef4_mdio_set_mmds_lpower(struct ef4_nic *efx, int low_power,
unsigned int mmd_mask);
/* Set (some of) the PHY settings over MDIO */
-int ef4_mdio_set_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd);
+int ef4_mdio_set_link_ksettings(struct ef4_nic *efx,
+ const struct ethtool_link_ksettings *cmd);
/* Push advertising flags and restart autonegotiation */
void ef4_mdio_an_reconfigure(struct ef4_nic *efx);
diff --git a/drivers/net/ethernet/sfc/falcon/net_driver.h b/drivers/net/ethernet/sfc/falcon/net_driver.h
index 210b28f..fe59dd6 100644
--- a/drivers/net/ethernet/sfc/falcon/net_driver.h
+++ b/drivers/net/ethernet/sfc/falcon/net_driver.h
@@ -684,8 +684,8 @@ static inline bool ef4_link_state_equal(const struct ef4_link_state *left,
* @reconfigure: Reconfigure PHY (e.g. for new link parameters)
* @poll: Update @link_state and report whether it changed.
* Serialised by the mac_lock.
- * @get_settings: Get ethtool settings. Serialised by the mac_lock.
- * @set_settings: Set ethtool settings. Serialised by the mac_lock.
+ * @get_link_ksettings: Get ethtool settings. Serialised by the mac_lock.
+ * @set_link_ksettings: Set ethtool settings. Serialised by the mac_lock.
* @set_npage_adv: Set abilities advertised in (Extended) Next Page
* (only needed where AN bit is set in mmds)
* @test_alive: Test that PHY is 'alive' (online)
@@ -700,10 +700,10 @@ struct ef4_phy_operations {
void (*remove) (struct ef4_nic *efx);
int (*reconfigure) (struct ef4_nic *efx);
bool (*poll) (struct ef4_nic *efx);
- void (*get_settings) (struct ef4_nic *efx,
- struct ethtool_cmd *ecmd);
- int (*set_settings) (struct ef4_nic *efx,
- struct ethtool_cmd *ecmd);
+ void (*get_link_ksettings)(struct ef4_nic *efx,
+ struct ethtool_link_ksettings *cmd);
+ int (*set_link_ksettings)(struct ef4_nic *efx,
+ const struct ethtool_link_ksettings *cmd);
void (*set_npage_adv) (struct ef4_nic *efx, u32);
int (*test_alive) (struct ef4_nic *efx);
const char *(*test_name) (struct ef4_nic *efx, unsigned int index);
diff --git a/drivers/net/ethernet/sfc/falcon/qt202x_phy.c b/drivers/net/ethernet/sfc/falcon/qt202x_phy.c
index d293316..f5e0f18 100644
--- a/drivers/net/ethernet/sfc/falcon/qt202x_phy.c
+++ b/drivers/net/ethernet/sfc/falcon/qt202x_phy.c
@@ -437,9 +437,10 @@ static int qt202x_phy_reconfigure(struct ef4_nic *efx)
return 0;
}
-static void qt202x_phy_get_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd)
+static void qt202x_phy_get_link_ksettings(struct ef4_nic *efx,
+ struct ethtool_link_ksettings *cmd)
{
- mdio45_ethtool_gset(&efx->mdio, ecmd);
+ mdio45_ethtool_ksettings_get(&efx->mdio, cmd);
}
static void qt202x_phy_remove(struct ef4_nic *efx)
@@ -487,8 +488,8 @@ static int qt202x_phy_get_module_eeprom(struct ef4_nic *efx,
.poll = qt202x_phy_poll,
.fini = ef4_port_dummy_op_void,
.remove = qt202x_phy_remove,
- .get_settings = qt202x_phy_get_settings,
- .set_settings = ef4_mdio_set_settings,
+ .get_link_ksettings = qt202x_phy_get_link_ksettings,
+ .set_link_ksettings = ef4_mdio_set_link_ksettings,
.test_alive = ef4_mdio_test_alive,
.get_module_eeprom = qt202x_phy_get_module_eeprom,
.get_module_info = qt202x_phy_get_module_info,
diff --git a/drivers/net/ethernet/sfc/falcon/tenxpress.c b/drivers/net/ethernet/sfc/falcon/tenxpress.c
index acc548a..ff9b4e2 100644
--- a/drivers/net/ethernet/sfc/falcon/tenxpress.c
+++ b/drivers/net/ethernet/sfc/falcon/tenxpress.c
@@ -351,9 +351,6 @@ static int tenxpress_phy_reconfigure(struct ef4_nic *efx)
return 0;
}
-static void
-tenxpress_get_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd);
-
/* Poll for link state changes */
static bool tenxpress_phy_poll(struct ef4_nic *efx)
{
@@ -443,7 +440,8 @@ void tenxpress_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode)
}
static void
-tenxpress_get_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd)
+tenxpress_get_link_ksettings(struct ef4_nic *efx,
+ struct ethtool_link_ksettings *cmd)
{
u32 adv = 0, lpa = 0;
int reg;
@@ -455,20 +453,22 @@ void tenxpress_set_id_led(struct ef4_nic *efx, enum ef4_led_mode mode)
if (reg & MDIO_AN_10GBT_STAT_LP10G)
lpa |= ADVERTISED_10000baseT_Full;
- mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);
+ mdio45_ethtool_ksettings_get_npage(&efx->mdio, cmd, adv, lpa);
/* In loopback, the PHY automatically brings up the correct interface,
* but doesn't advertise the correct speed. So override it */
if (LOOPBACK_EXTERNAL(efx))
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ cmd->base.speed = SPEED_10000;
}
-static int tenxpress_set_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd)
+static int
+tenxpress_set_link_ksettings(struct ef4_nic *efx,
+ const struct ethtool_link_ksettings *cmd)
{
- if (!ecmd->autoneg)
+ if (!cmd->base.autoneg)
return -EINVAL;
- return ef4_mdio_set_settings(efx, ecmd);
+ return ef4_mdio_set_link_ksettings(efx, cmd);
}
static void sfx7101_set_npage_adv(struct ef4_nic *efx, u32 advertising)
@@ -485,8 +485,8 @@ static void sfx7101_set_npage_adv(struct ef4_nic *efx, u32 advertising)
.poll = tenxpress_phy_poll,
.fini = sfx7101_phy_fini,
.remove = tenxpress_phy_remove,
- .get_settings = tenxpress_get_settings,
- .set_settings = tenxpress_set_settings,
+ .get_link_ksettings = tenxpress_get_link_ksettings,
+ .set_link_ksettings = tenxpress_set_link_ksettings,
.set_npage_adv = sfx7101_set_npage_adv,
.test_alive = ef4_mdio_test_alive,
.test_name = sfx7101_test_name,
diff --git a/drivers/net/ethernet/sfc/falcon/txc43128_phy.c b/drivers/net/ethernet/sfc/falcon/txc43128_phy.c
index 18421f5..3c55fd2 100644
--- a/drivers/net/ethernet/sfc/falcon/txc43128_phy.c
+++ b/drivers/net/ethernet/sfc/falcon/txc43128_phy.c
@@ -540,9 +540,10 @@ static int txc43128_run_tests(struct ef4_nic *efx, int *results, unsigned flags)
return rc;
}
-static void txc43128_get_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd)
+static void txc43128_get_link_ksettings(struct ef4_nic *efx,
+ struct ethtool_link_ksettings *cmd)
{
- mdio45_ethtool_gset(&efx->mdio, ecmd);
+ mdio45_ethtool_ksettings_get(&efx->mdio, cmd);
}
const struct ef4_phy_operations falcon_txc_phy_ops = {
@@ -552,8 +553,8 @@ static void txc43128_get_settings(struct ef4_nic *efx, struct ethtool_cmd *ecmd)
.poll = txc43128_phy_poll,
.fini = txc43128_phy_fini,
.remove = txc43128_phy_remove,
- .get_settings = txc43128_get_settings,
- .set_settings = ef4_mdio_set_settings,
+ .get_link_ksettings = txc43128_get_link_ksettings,
+ .set_link_ksettings = ef4_mdio_set_link_ksettings,
.test_alive = ef4_mdio_test_alive,
.run_tests = txc43128_run_tests,
.test_name = txc43128_test_name,
--
1.7.4.4
^ permalink raw reply related
* [PATCH 1/2] net: mdio: add mdio45_ethtool_ksettings_get
From: Philippe Reynes @ 2016-12-20 22:24 UTC (permalink / raw)
To: linux-net-drivers, ecree, bkenward, davem, andrew
Cc: netdev, linux-kernel, Philippe Reynes
There is a function in mdio for the old ethtool api gset.
We add a new function mdio45_ethtool_ksettings_get for the
new ethtool api glinksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/mdio.c | 178 ++++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mdio.h | 21 ++++++
2 files changed, 199 insertions(+), 0 deletions(-)
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index 3e027ed..077364c 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -342,6 +342,184 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
EXPORT_SYMBOL(mdio45_ethtool_gset_npage);
/**
+ * mdio45_ethtool_ksettings_get_npage - get settings for ETHTOOL_GLINKSETTINGS
+ * @mdio: MDIO interface
+ * @cmd: Ethtool request structure
+ * @npage_adv: Modes currently advertised on next pages
+ * @npage_lpa: Modes advertised by link partner on next pages
+ *
+ * The @cmd parameter is expected to have been cleared before calling
+ * mdio45_ethtool_ksettings_get_npage().
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them. The
+ * caller must pass them in.
+ */
+void mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
+ struct ethtool_link_ksettings *cmd,
+ u32 npage_adv, u32 npage_lpa)
+{
+ int reg;
+ u32 speed, supported = 0, advertising = 0, lp_advertising = 0;
+
+ BUILD_BUG_ON(MDIO_SUPPORTS_C22 != ETH_MDIO_SUPPORTS_C22);
+ BUILD_BUG_ON(MDIO_SUPPORTS_C45 != ETH_MDIO_SUPPORTS_C45);
+
+ cmd->base.phy_address = mdio->prtad;
+ cmd->base.mdio_support =
+ mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22);
+
+ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+ MDIO_CTRL2);
+ switch (reg & MDIO_PMA_CTRL2_TYPE) {
+ case MDIO_PMA_CTRL2_10GBT:
+ case MDIO_PMA_CTRL2_1000BT:
+ case MDIO_PMA_CTRL2_100BTX:
+ case MDIO_PMA_CTRL2_10BT:
+ cmd->base.port = PORT_TP;
+ supported = SUPPORTED_TP;
+ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+ MDIO_SPEED);
+ if (reg & MDIO_SPEED_10G)
+ supported |= SUPPORTED_10000baseT_Full;
+ if (reg & MDIO_PMA_SPEED_1000)
+ supported |= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseT_Half);
+ if (reg & MDIO_PMA_SPEED_100)
+ supported |= (SUPPORTED_100baseT_Full |
+ SUPPORTED_100baseT_Half);
+ if (reg & MDIO_PMA_SPEED_10)
+ supported |= (SUPPORTED_10baseT_Full |
+ SUPPORTED_10baseT_Half);
+ advertising = ADVERTISED_TP;
+ break;
+
+ case MDIO_PMA_CTRL2_10GBCX4:
+ cmd->base.port = PORT_OTHER;
+ supported = 0;
+ advertising = 0;
+ break;
+
+ case MDIO_PMA_CTRL2_10GBKX4:
+ case MDIO_PMA_CTRL2_10GBKR:
+ case MDIO_PMA_CTRL2_1000BKX:
+ cmd->base.port = PORT_OTHER;
+ supported = SUPPORTED_Backplane;
+ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+ MDIO_PMA_EXTABLE);
+ if (reg & MDIO_PMA_EXTABLE_10GBKX4)
+ supported |= SUPPORTED_10000baseKX4_Full;
+ if (reg & MDIO_PMA_EXTABLE_10GBKR)
+ supported |= SUPPORTED_10000baseKR_Full;
+ if (reg & MDIO_PMA_EXTABLE_1000BKX)
+ supported |= SUPPORTED_1000baseKX_Full;
+ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+ MDIO_PMA_10GBR_FECABLE);
+ if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
+ supported |= SUPPORTED_10000baseR_FEC;
+ advertising = ADVERTISED_Backplane;
+ break;
+
+ /* All the other defined modes are flavours of optical */
+ default:
+ cmd->base.port = PORT_FIBRE;
+ supported = SUPPORTED_FIBRE;
+ advertising = ADVERTISED_FIBRE;
+ break;
+ }
+
+ if (mdio->mmds & MDIO_DEVS_AN) {
+ supported |= SUPPORTED_Autoneg;
+ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+ MDIO_CTRL1);
+ if (reg & MDIO_AN_CTRL1_ENABLE) {
+ cmd->base.autoneg = AUTONEG_ENABLE;
+ advertising |=
+ ADVERTISED_Autoneg |
+ mdio45_get_an(mdio, MDIO_AN_ADVERTISE) |
+ npage_adv;
+ } else {
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ }
+ } else {
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ }
+
+ if (cmd->base.autoneg) {
+ u32 modes = 0;
+ int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
+ MDIO_MMD_AN, MDIO_STAT1);
+
+ /* If AN is complete and successful, report best common
+ * mode, otherwise report best advertised mode.
+ */
+ if (an_stat & MDIO_AN_STAT1_COMPLETE) {
+ lp_advertising =
+ mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa;
+ if (an_stat & MDIO_AN_STAT1_LPABLE)
+ lp_advertising |= ADVERTISED_Autoneg;
+ modes = advertising & lp_advertising;
+ }
+ if ((modes & ~ADVERTISED_Autoneg) == 0)
+ modes = advertising;
+
+ if (modes & (ADVERTISED_10000baseT_Full |
+ ADVERTISED_10000baseKX4_Full |
+ ADVERTISED_10000baseKR_Full)) {
+ speed = SPEED_10000;
+ cmd->base.duplex = DUPLEX_FULL;
+ } else if (modes & (ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseKX_Full)) {
+ speed = SPEED_1000;
+ cmd->base.duplex = !(modes & ADVERTISED_1000baseT_Half);
+ } else if (modes & (ADVERTISED_100baseT_Full |
+ ADVERTISED_100baseT_Half)) {
+ speed = SPEED_100;
+ cmd->base.duplex = !!(modes & ADVERTISED_100baseT_Full);
+ } else {
+ speed = SPEED_10;
+ cmd->base.duplex = !!(modes & ADVERTISED_10baseT_Full);
+ }
+ } else {
+ /* Report forced settings */
+ reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+ MDIO_CTRL1);
+ speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1)
+ * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
+ cmd->base.duplex = (reg & MDIO_CTRL1_FULLDPLX ||
+ speed == SPEED_10000);
+ }
+
+ cmd->base.speed = speed;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,
+ lp_advertising);
+
+ /* 10GBASE-T MDI/MDI-X */
+ if (cmd->base.port == PORT_TP && (cmd->base.speed == SPEED_10000)) {
+ switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+ MDIO_PMA_10GBT_SWAPPOL)) {
+ case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
+ cmd->base.eth_tp_mdix = ETH_TP_MDI;
+ break;
+ case 0:
+ cmd->base.eth_tp_mdix = ETH_TP_MDI_X;
+ break;
+ default:
+ /* It's complicated... */
+ cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(mdio45_ethtool_ksettings_get_npage);
+
+/**
* mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
* @mdio: MDIO interface
* @mii_data: MII ioctl data structure
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index bf9d1d7..b6587a4 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -130,6 +130,10 @@ extern int mdio_set_flag(const struct mdio_if_info *mdio,
extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
struct ethtool_cmd *ecmd,
u32 npage_adv, u32 npage_lpa);
+extern void
+mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
+ struct ethtool_link_ksettings *cmd,
+ u32 npage_adv, u32 npage_lpa);
/**
* mdio45_ethtool_gset - get settings for ETHTOOL_GSET
@@ -147,6 +151,23 @@ static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
}
+/**
+ * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS
+ * @mdio: MDIO interface
+ * @cmd: Ethtool request structure
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them. Use
+ * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits
+ * from next pages.
+ */
+static inline void
+mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio,
+ struct ethtool_link_ksettings *cmd)
+{
+ mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0);
+}
+
extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
struct mii_ioctl_data *mii_data, int cmd);
--
1.7.4.4
^ permalink raw reply related
* Re: ipv6: handle -EFAULT from skb_copy_bits
From: Dave Jones @ 2016-12-20 22:12 UTC (permalink / raw)
To: Cong Wang; +Cc: David Miller, Linux Kernel Network Developers
In-Reply-To: <CAM_iQpUgqJEG544HqH1iwdQFL9-nV3-hMuuH_eU9OnJ--pX+jg@mail.gmail.com>
On Tue, Dec 20, 2016 at 11:31:38AM -0800, Cong Wang wrote:
> On Tue, Dec 20, 2016 at 10:17 AM, Dave Jones <davej@codemonkey.org.uk> wrote:
> > On Mon, Dec 19, 2016 at 08:36:23PM -0500, David Miller wrote:
> > > From: Dave Jones <davej@codemonkey.org.uk>
> > > Date: Mon, 19 Dec 2016 19:40:13 -0500
> > >
> > > > On Mon, Dec 19, 2016 at 07:31:44PM -0500, Dave Jones wrote:
> > > >
> > > > > Unfortunately, this made no difference. I spent some time today trying
> > > > > to make a better reproducer, but failed. I'll revisit again tomorrow.
> > > > >
> > > > > Maybe I need >1 process/thread to trigger this. That would explain why
> > > > > I can trigger it with Trinity.
> > > >
> > > > scratch that last part, I finally just repro'd it with a single process.
> > >
> > > Thanks for the info, I'll try to think about this some more.
> >
> > I threw in some debug printks right before that BUG_ON.
> > it's always this:
> >
> > skb->len=31 skb->data_len=0 offset:30 total_len:9
>
> Clearly we fail because 30 > 31 - 2, seems 'offset' is not correct here,
> off-by-one?
Ok, I finally made a messy, albeit good enough reproducer.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#define LEN 504
int main(int argc, char* argv[])
{
int fd;
int zero = 0;
char buf[LEN];
memset(buf, 0, LEN);
fd = socket(AF_INET6, SOCK_RAW, 7);
setsockopt(fd, SOL_IPV6, IPV6_CHECKSUM, &zero, 4);
setsockopt(fd, SOL_IPV6, IPV6_DSTOPTS, &buf, LEN);
sendto(fd, buf, 1, 0, (struct sockaddr *) buf, 110);
}
^ permalink raw reply
* [PATCH net-next 06/10] net: netcp: ethss: get phy-handle only if link interface is MAC-to-PHY
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
Currently to parse phy-handle, driver doesn't check if the interface is
MAC to PHY. This patch add this check for all MAC to PHY interface types
supported by the driver.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
drivers/net/ethernet/ti/netcp_ethss.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index cb48f88..9266961 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -2956,7 +2956,9 @@ static int init_slave(struct gbe_priv *gbe_dev, struct gbe_slave *slave,
}
slave->open = false;
- slave->phy_node = of_parse_phandle(node, "phy-handle", 0);
+ if ((slave->link_interface == SGMII_LINK_MAC_PHY) ||
+ (slave->link_interface == XGMII_LINK_MAC_PHY))
+ slave->phy_node = of_parse_phandle(node, "phy-handle", 0);
slave->port_num = gbe_get_slave_port(gbe_dev, slave->slave_num);
if (slave->link_interface >= XGMII_LINK_MAC_PHY)
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 05/10] net: netcp: store network statistics in 64 bits
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
From: Michael Scherban <m-scherban@ti.com>
Previously the network statistics were stored in 32 bit variable
which can cause some stats to roll over after several minutes of
high traffic. This implements 64 bit storage so larger numbers
can be stored.
Signed-off-by: Michael Scherban <m-scherban@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
drivers/net/ethernet/ti/netcp.h | 18 ++++++++++
drivers/net/ethernet/ti/netcp_core.c | 68 +++++++++++++++++++++++++++++-------
2 files changed, 74 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp.h b/drivers/net/ethernet/ti/netcp.h
index a92abd6..d243c5d 100644
--- a/drivers/net/ethernet/ti/netcp.h
+++ b/drivers/net/ethernet/ti/netcp.h
@@ -23,6 +23,7 @@
#include <linux/netdevice.h>
#include <linux/soc/ti/knav_dma.h>
+#include <linux/u64_stats_sync.h>
/* Maximum Ethernet frame size supported by Keystone switch */
#define NETCP_MAX_FRAME_SIZE 9504
@@ -68,6 +69,20 @@ struct netcp_addr {
struct list_head node;
};
+struct netcp_stats {
+ struct u64_stats_sync syncp_rx ____cacheline_aligned_in_smp;
+ u64 rx_packets;
+ u64 rx_bytes;
+ u32 rx_errors;
+ u32 rx_dropped;
+
+ struct u64_stats_sync syncp_tx ____cacheline_aligned_in_smp;
+ u64 tx_packets;
+ u64 tx_bytes;
+ u32 tx_errors;
+ u32 tx_dropped;
+};
+
struct netcp_intf {
struct device *dev;
struct device *ndev_dev;
@@ -88,6 +103,9 @@ struct netcp_intf {
struct napi_struct rx_napi;
struct napi_struct tx_napi;
+ /* 64-bit netcp stats */
+ struct netcp_stats stats;
+
void *rx_channel;
const char *dma_chan_name;
u32 rx_pool_size;
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 286fd8d..b077ed4 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -629,6 +629,7 @@ static void netcp_free_rx_desc_chain(struct netcp_intf *netcp,
static void netcp_empty_rx_queue(struct netcp_intf *netcp)
{
+ struct netcp_stats *rx_stats = &netcp->stats;
struct knav_dma_desc *desc;
unsigned int dma_sz;
dma_addr_t dma;
@@ -642,16 +643,17 @@ static void netcp_empty_rx_queue(struct netcp_intf *netcp)
if (unlikely(!desc)) {
dev_err(netcp->ndev_dev, "%s: failed to unmap Rx desc\n",
__func__);
- netcp->ndev->stats.rx_errors++;
+ rx_stats->rx_errors++;
continue;
}
netcp_free_rx_desc_chain(netcp, desc);
- netcp->ndev->stats.rx_dropped++;
+ rx_stats->rx_dropped++;
}
}
static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
{
+ struct netcp_stats *rx_stats = &netcp->stats;
unsigned int dma_sz, buf_len, org_buf_len;
struct knav_dma_desc *desc, *ndesc;
unsigned int pkt_sz = 0, accum_sz;
@@ -757,8 +759,8 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
if (unlikely(ret)) {
dev_err(netcp->ndev_dev, "RX hook %d failed: %d\n",
rx_hook->order, ret);
- netcp->ndev->stats.rx_errors++;
/* Free the primary descriptor */
+ rx_stats->rx_dropped++;
knav_pool_desc_put(netcp->rx_pool, desc);
dev_kfree_skb(skb);
return 0;
@@ -767,8 +769,10 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
/* Free the primary descriptor */
knav_pool_desc_put(netcp->rx_pool, desc);
- netcp->ndev->stats.rx_packets++;
- netcp->ndev->stats.rx_bytes += skb->len;
+ u64_stats_update_begin(&rx_stats->syncp_rx);
+ rx_stats->rx_packets++;
+ rx_stats->rx_bytes += skb->len;
+ u64_stats_update_end(&rx_stats->syncp_rx);
/* push skb up the stack */
skb->protocol = eth_type_trans(skb, netcp->ndev);
@@ -777,7 +781,7 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
free_desc:
netcp_free_rx_desc_chain(netcp, desc);
- netcp->ndev->stats.rx_errors++;
+ rx_stats->rx_errors++;
return 0;
}
@@ -1008,6 +1012,7 @@ static void netcp_free_tx_desc_chain(struct netcp_intf *netcp,
static int netcp_process_tx_compl_packets(struct netcp_intf *netcp,
unsigned int budget)
{
+ struct netcp_stats *tx_stats = &netcp->stats;
struct knav_dma_desc *desc;
struct netcp_tx_cb *tx_cb;
struct sk_buff *skb;
@@ -1022,7 +1027,7 @@ static int netcp_process_tx_compl_packets(struct netcp_intf *netcp,
desc = knav_pool_desc_unmap(netcp->tx_pool, dma, dma_sz);
if (unlikely(!desc)) {
dev_err(netcp->ndev_dev, "failed to unmap Tx desc\n");
- netcp->ndev->stats.tx_errors++;
+ tx_stats->tx_errors++;
continue;
}
@@ -1033,7 +1038,7 @@ static int netcp_process_tx_compl_packets(struct netcp_intf *netcp,
netcp_free_tx_desc_chain(netcp, desc, dma_sz);
if (!skb) {
dev_err(netcp->ndev_dev, "No skb in Tx desc\n");
- netcp->ndev->stats.tx_errors++;
+ tx_stats->tx_errors++;
continue;
}
@@ -1050,8 +1055,10 @@ static int netcp_process_tx_compl_packets(struct netcp_intf *netcp,
netif_wake_subqueue(netcp->ndev, subqueue);
}
- netcp->ndev->stats.tx_packets++;
- netcp->ndev->stats.tx_bytes += skb->len;
+ u64_stats_update_begin(&tx_stats->syncp_tx);
+ tx_stats->tx_packets++;
+ tx_stats->tx_bytes += skb->len;
+ u64_stats_update_end(&tx_stats->syncp_tx);
dev_kfree_skb(skb);
pkts++;
}
@@ -1272,6 +1279,7 @@ static int netcp_tx_submit_skb(struct netcp_intf *netcp,
static int netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct netcp_intf *netcp = netdev_priv(ndev);
+ struct netcp_stats *tx_stats = &netcp->stats;
int subqueue = skb_get_queue_mapping(skb);
struct knav_dma_desc *desc;
int desc_count, ret = 0;
@@ -1287,7 +1295,7 @@ static int netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
/* If we get here, the skb has already been dropped */
dev_warn(netcp->ndev_dev, "padding failed (%d), packet dropped\n",
ret);
- ndev->stats.tx_dropped++;
+ tx_stats->tx_dropped++;
return ret;
}
skb->len = NETCP_MIN_PACKET_SIZE;
@@ -1315,7 +1323,7 @@ static int netcp_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
return NETDEV_TX_OK;
drop:
- ndev->stats.tx_dropped++;
+ tx_stats->tx_dropped++;
if (desc)
netcp_free_tx_desc_chain(netcp, desc, sizeof(*desc));
dev_kfree_skb(skb);
@@ -1897,12 +1905,46 @@ static int netcp_setup_tc(struct net_device *dev, u32 handle, __be16 proto,
return 0;
}
+static struct rtnl_link_stats64 *
+netcp_get_stats(struct net_device *ndev, struct rtnl_link_stats64 *stats)
+{
+ struct netcp_intf *netcp = netdev_priv(ndev);
+ struct netcp_stats *p = &netcp->stats;
+ u64 rxpackets, rxbytes, txpackets, txbytes;
+ unsigned int start;
+
+ do {
+ start = u64_stats_fetch_begin_irq(&p->syncp_rx);
+ rxpackets = p->rx_packets;
+ rxbytes = p->rx_bytes;
+ } while (u64_stats_fetch_retry_irq(&p->syncp_rx, start));
+
+ do {
+ start = u64_stats_fetch_begin_irq(&p->syncp_tx);
+ txpackets = p->tx_packets;
+ txbytes = p->tx_bytes;
+ } while (u64_stats_fetch_retry_irq(&p->syncp_tx, start));
+
+ stats->rx_packets = rxpackets;
+ stats->rx_bytes = rxbytes;
+ stats->tx_packets = txpackets;
+ stats->tx_bytes = txbytes;
+
+ /* The following are stored as 32 bit */
+ stats->rx_errors = p->rx_errors;
+ stats->rx_dropped = p->rx_dropped;
+ stats->tx_dropped = p->tx_dropped;
+
+ return stats;
+}
+
static const struct net_device_ops netcp_netdev_ops = {
.ndo_open = netcp_ndo_open,
.ndo_stop = netcp_ndo_stop,
.ndo_start_xmit = netcp_ndo_start_xmit,
.ndo_set_rx_mode = netcp_set_rx_mode,
.ndo_do_ioctl = netcp_ndo_ioctl,
+ .ndo_get_stats64 = netcp_get_stats,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_vlan_rx_add_vid = netcp_rx_add_vid,
@@ -1949,6 +1991,8 @@ static int netcp_create_interface(struct netcp_device *netcp_device,
INIT_LIST_HEAD(&netcp->txhook_list_head);
INIT_LIST_HEAD(&netcp->rxhook_list_head);
INIT_LIST_HEAD(&netcp->addr_list);
+ u64_stats_init(&netcp->stats.syncp_rx);
+ u64_stats_init(&netcp->stats.syncp_tx);
netcp->netcp_device = netcp_device;
netcp->dev = netcp_device->device;
netcp->ndev = ndev;
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 03/10] net: netcp: extract eflag from desc for rx_hook handling
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
Extract the eflag bits from the received desc and pass it down
the rx_hook chain to be available for netcp modules. Also the
psdata and epib data has to be inspected by the netcp modules.
So the desc can be freed only after returning from the rx_hook.
So move knav_pool_desc_put() after the rx_hook processing.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
---
drivers/net/ethernet/ti/netcp.h | 1 +
drivers/net/ethernet/ti/netcp_core.c | 20 +++++++++++++++++---
include/linux/soc/ti/knav_dma.h | 2 ++
3 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp.h b/drivers/net/ethernet/ti/netcp.h
index 0f58c58..a92abd6 100644
--- a/drivers/net/ethernet/ti/netcp.h
+++ b/drivers/net/ethernet/ti/netcp.h
@@ -115,6 +115,7 @@ struct netcp_packet {
struct sk_buff *skb;
__le32 *epib;
u32 *psdata;
+ u32 eflags;
unsigned int psdata_len;
struct netcp_intf *netcp;
struct netcp_tx_pipe *tx_pipe;
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index c243335..a136c56 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -122,6 +122,13 @@ static void get_pkt_info(dma_addr_t *buff, u32 *buff_len, dma_addr_t *ndesc,
*ndesc = le32_to_cpu(desc->next_desc);
}
+static void get_desc_info(u32 *desc_info, u32 *pkt_info,
+ struct knav_dma_desc *desc)
+{
+ *desc_info = le32_to_cpu(desc->desc_info);
+ *pkt_info = le32_to_cpu(desc->packet_info);
+}
+
static u32 get_sw_data(int index, struct knav_dma_desc *desc)
{
/* No Endian conversion needed as this data is untouched by hw */
@@ -653,6 +660,7 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
struct netcp_packet p_info;
struct sk_buff *skb;
void *org_buf_ptr;
+ u32 tmp;
dma_desc = knav_queue_pop(netcp->rx_queue, &dma_sz);
if (!dma_desc)
@@ -724,9 +732,6 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
knav_pool_desc_put(netcp->rx_pool, ndesc);
}
- /* Free the primary descriptor */
- knav_pool_desc_put(netcp->rx_pool, desc);
-
/* check for packet len and warn */
if (unlikely(pkt_sz != accum_sz))
dev_dbg(netcp->ndev_dev, "mismatch in packet size(%d) & sum of fragments(%d)\n",
@@ -739,6 +744,11 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
p_info.skb = skb;
skb->dev = netcp->ndev;
p_info.rxtstamp_complete = false;
+ get_desc_info(&tmp, &p_info.eflags, desc);
+ p_info.epib = desc->epib;
+ p_info.psdata = (u32 __force *)desc->psdata;
+ p_info.eflags = ((p_info.eflags >> KNAV_DMA_DESC_EFLAGS_SHIFT) &
+ KNAV_DMA_DESC_EFLAGS_MASK);
list_for_each_entry(rx_hook, &netcp->rxhook_list_head, list) {
int ret;
@@ -748,10 +758,14 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
dev_err(netcp->ndev_dev, "RX hook %d failed: %d\n",
rx_hook->order, ret);
netcp->ndev->stats.rx_errors++;
+ /* Free the primary descriptor */
+ knav_pool_desc_put(netcp->rx_pool, desc);
dev_kfree_skb(skb);
return 0;
}
}
+ /* Free the primary descriptor */
+ knav_pool_desc_put(netcp->rx_pool, desc);
netcp->ndev->stats.rx_packets++;
netcp->ndev->stats.rx_bytes += skb->len;
diff --git a/include/linux/soc/ti/knav_dma.h b/include/linux/soc/ti/knav_dma.h
index 35cb926..2b78826 100644
--- a/include/linux/soc/ti/knav_dma.h
+++ b/include/linux/soc/ti/knav_dma.h
@@ -41,6 +41,8 @@
#define KNAV_DMA_DESC_RETQ_SHIFT 0
#define KNAV_DMA_DESC_RETQ_MASK MASK(14)
#define KNAV_DMA_DESC_BUF_LEN_MASK MASK(22)
+#define KNAV_DMA_DESC_EFLAGS_MASK MASK(4)
+#define KNAV_DMA_DESC_EFLAGS_SHIFT 20
#define KNAV_DMA_NUM_EPIB_WORDS 4
#define KNAV_DMA_NUM_PS_WORDS 16
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 10/10] net: netcp: ale: add proper ale entry mask bits for netcp switch ALE
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA, linux-omap-u79uwXL29TY76Z2rM5mHXA,
grygorii.strashko-l0cyMroinI0, mugunthanvnm-l0cyMroinI0,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, arnd-r2nGTMty4D4,
davem-fT/PcQaiUtIeIZ0/mPfg9Q, devicetree-u79uwXL29TY76Z2rM5mHXA,
mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
For NetCP NU Switch ALE, some of the mask bits are different than
defaults used in the driver. Add a new macro DEFINE_ALE_FIELD1 that use
a configurable mask bits and use it in the driver. These bits are set to
correct values by using the new variables added to cpsw_ale structure
and re-used in the macros. The parameter nu_switch_ale is configured by
the caller driver to indicate the ALE is for that switch and is used in
the ALE driver to do customization as needed.
Signed-off-by: Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>
Signed-off-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
---
drivers/net/ethernet/ti/cpsw_ale.c | 99 ++++++++++++++++++++++++++++++--------
drivers/net/ethernet/ti/cpsw_ale.h | 4 ++
2 files changed, 84 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 62a18d6..ddd43e0 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -29,6 +29,7 @@
#define ALE_VERSION_MAJOR(rev, mask) (((rev) >> 8) & (mask))
#define ALE_VERSION_MINOR(rev) (rev & 0xff)
+#define ALE_VERSION_1R3 0x0103
#define ALE_VERSION_1R4 0x0104
/* ALE Registers */
@@ -46,6 +47,7 @@
#define ALE_UNKNOWNVLAN_UNREG_MCAST_FLOOD 0x94
#define ALE_UNKNOWNVLAN_REG_MCAST_FLOOD 0x98
#define ALE_UNKNOWNVLAN_FORCE_UNTAG_EGRESS 0x9C
+#define ALE_VLAN_MASK_MUX(reg) (0xc0 + (0x4 * (reg)))
#define ALE_TABLE_WRITE BIT(31)
@@ -96,20 +98,34 @@ static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits,
cpsw_ale_set_field(ale_entry, start, bits, value); \
}
+#define DEFINE_ALE_FIELD1(name, start) \
+static inline int cpsw_ale_get_##name(u32 *ale_entry, u32 bits) \
+{ \
+ return cpsw_ale_get_field(ale_entry, start, bits); \
+} \
+static inline void cpsw_ale_set_##name(u32 *ale_entry, u32 value, \
+ u32 bits) \
+{ \
+ cpsw_ale_set_field(ale_entry, start, bits, value); \
+}
+
DEFINE_ALE_FIELD(entry_type, 60, 2)
DEFINE_ALE_FIELD(vlan_id, 48, 12)
DEFINE_ALE_FIELD(mcast_state, 62, 2)
-DEFINE_ALE_FIELD(port_mask, 66, 3)
+DEFINE_ALE_FIELD1(port_mask, 66)
DEFINE_ALE_FIELD(super, 65, 1)
DEFINE_ALE_FIELD(ucast_type, 62, 2)
-DEFINE_ALE_FIELD(port_num, 66, 2)
+DEFINE_ALE_FIELD1(port_num, 66)
DEFINE_ALE_FIELD(blocked, 65, 1)
DEFINE_ALE_FIELD(secure, 64, 1)
-DEFINE_ALE_FIELD(vlan_untag_force, 24, 3)
-DEFINE_ALE_FIELD(vlan_reg_mcast, 16, 3)
-DEFINE_ALE_FIELD(vlan_unreg_mcast, 8, 3)
-DEFINE_ALE_FIELD(vlan_member_list, 0, 3)
+DEFINE_ALE_FIELD1(vlan_untag_force, 24)
+DEFINE_ALE_FIELD1(vlan_reg_mcast, 16)
+DEFINE_ALE_FIELD1(vlan_unreg_mcast, 8)
+DEFINE_ALE_FIELD1(vlan_member_list, 0)
DEFINE_ALE_FIELD(mcast, 40, 1)
+/* ALE NetCP nu switch specific */
+DEFINE_ALE_FIELD(vlan_unreg_mcast_idx, 20, 3)
+DEFINE_ALE_FIELD(vlan_reg_mcast_idx, 44, 3)
/* The MAC address field in the ALE entry cannot be macroized as above */
static inline void cpsw_ale_get_addr(u32 *ale_entry, u8 *addr)
@@ -235,14 +251,16 @@ static void cpsw_ale_flush_mcast(struct cpsw_ale *ale, u32 *ale_entry,
{
int mask;
- mask = cpsw_ale_get_port_mask(ale_entry);
+ mask = cpsw_ale_get_port_mask(ale_entry,
+ ale->port_mask_bits);
if ((mask & port_mask) == 0)
return; /* ports dont intersect, not interested */
mask &= ~port_mask;
/* free if only remaining port is host port */
if (mask)
- cpsw_ale_set_port_mask(ale_entry, mask);
+ cpsw_ale_set_port_mask(ale_entry, mask,
+ ale->port_mask_bits);
else
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE);
}
@@ -303,7 +321,7 @@ int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port,
cpsw_ale_set_ucast_type(ale_entry, ALE_UCAST_PERSISTANT);
cpsw_ale_set_secure(ale_entry, (flags & ALE_SECURE) ? 1 : 0);
cpsw_ale_set_blocked(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0);
- cpsw_ale_set_port_num(ale_entry, port);
+ cpsw_ale_set_port_num(ale_entry, port, ale->port_num_bits);
idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0);
if (idx < 0)
@@ -350,9 +368,11 @@ int cpsw_ale_add_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask,
cpsw_ale_set_super(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0);
cpsw_ale_set_mcast_state(ale_entry, mcast_state);
- mask = cpsw_ale_get_port_mask(ale_entry);
+ mask = cpsw_ale_get_port_mask(ale_entry,
+ ale->port_mask_bits);
port_mask |= mask;
- cpsw_ale_set_port_mask(ale_entry, port_mask);
+ cpsw_ale_set_port_mask(ale_entry, port_mask,
+ ale->port_mask_bits);
if (idx < 0)
idx = cpsw_ale_match_free(ale);
@@ -379,7 +399,8 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask,
cpsw_ale_read(ale, idx, ale_entry);
if (port_mask)
- cpsw_ale_set_port_mask(ale_entry, port_mask);
+ cpsw_ale_set_port_mask(ale_entry, port_mask,
+ ale->port_mask_bits);
else
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE);
@@ -388,6 +409,21 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask,
}
EXPORT_SYMBOL_GPL(cpsw_ale_del_mcast);
+/* ALE NetCP NU switch specific vlan functions */
+static void cpsw_ale_set_vlan_mcast(struct cpsw_ale *ale, u32 *ale_entry,
+ int reg_mcast, int unreg_mcast)
+{
+ int idx;
+
+ /* Set VLAN registered multicast flood mask */
+ idx = cpsw_ale_get_vlan_reg_mcast_idx(ale_entry);
+ writel(reg_mcast, ale->params.ale_regs + ALE_VLAN_MASK_MUX(idx));
+
+ /* Set VLAN unregistered multicast flood mask */
+ idx = cpsw_ale_get_vlan_unreg_mcast_idx(ale_entry);
+ writel(unreg_mcast, ale->params.ale_regs + ALE_VLAN_MASK_MUX(idx));
+}
+
int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
int reg_mcast, int unreg_mcast)
{
@@ -401,10 +437,16 @@ int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_VLAN);
cpsw_ale_set_vlan_id(ale_entry, vid);
- cpsw_ale_set_vlan_untag_force(ale_entry, untag);
- cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast);
- cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast);
- cpsw_ale_set_vlan_member_list(ale_entry, port);
+ cpsw_ale_set_vlan_untag_force(ale_entry, untag, ale->vlan_field_bits);
+ if (!ale->params.nu_switch_ale) {
+ cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast,
+ ale->vlan_field_bits);
+ cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast,
+ ale->vlan_field_bits);
+ } else {
+ cpsw_ale_set_vlan_mcast(ale, ale_entry, reg_mcast, unreg_mcast);
+ }
+ cpsw_ale_set_vlan_member_list(ale_entry, port, ale->vlan_field_bits);
if (idx < 0)
idx = cpsw_ale_match_free(ale);
@@ -430,7 +472,8 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask)
cpsw_ale_read(ale, idx, ale_entry);
if (port_mask)
- cpsw_ale_set_vlan_member_list(ale_entry, port_mask);
+ cpsw_ale_set_vlan_member_list(ale_entry, port_mask,
+ ale->vlan_field_bits);
else
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE);
@@ -458,12 +501,15 @@ void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti)
if (type != ALE_TYPE_VLAN)
continue;
- unreg_mcast = cpsw_ale_get_vlan_unreg_mcast(ale_entry);
+ unreg_mcast =
+ cpsw_ale_get_vlan_unreg_mcast(ale_entry,
+ ale->vlan_field_bits);
if (allmulti)
unreg_mcast |= 1;
else
unreg_mcast &= ~1;
- cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast);
+ cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast,
+ ale->vlan_field_bits);
cpsw_ale_write(ale, idx, ale_entry);
}
}
@@ -769,6 +815,14 @@ void cpsw_ale_start(struct cpsw_ale *ale)
dev_info(ale->params.dev,
"ALE Table size %ld\n", ale->params.ale_entries);
+ /* set default bits for existing h/w */
+ ale->port_mask_bits = 3;
+ ale->port_num_bits = 2;
+ ale->vlan_field_bits = 3;
+
+ /* Set defaults override for ALE on NetCP NU switch and for version
+ * 1R3
+ */
if (ale->params.nu_switch_ale) {
/* Separate registers for unknown vlan configuration.
* Also there are N bits, where N is number of ale
@@ -793,6 +847,13 @@ void cpsw_ale_start(struct cpsw_ale *ale)
ale_controls[ALE_PORT_UNTAGGED_EGRESS].shift = 0;
ale_controls[ALE_PORT_UNTAGGED_EGRESS].offset =
ALE_UNKNOWNVLAN_FORCE_UNTAG_EGRESS;
+ ale->port_mask_bits = ale->params.ale_ports;
+ ale->port_num_bits = ale->params.ale_ports - 1;
+ ale->vlan_field_bits = ale->params.ale_ports;
+ } else if (ale->version == ALE_VERSION_1R3) {
+ ale->port_mask_bits = ale->params.ale_ports;
+ ale->port_num_bits = 3;
+ ale->vlan_field_bits = ale->params.ale_ports;
}
cpsw_ale_control_set(ale, 0, ALE_ENABLE, 1);
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index b1c7954..25d24e8 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -39,6 +39,10 @@ struct cpsw_ale {
unsigned long ageout;
int allmulti;
u32 version;
+ /* These bits are different on NetCP NU Switch ALE */
+ u32 port_mask_bits;
+ u32 port_num_bits;
+ u32 vlan_field_bits;
};
enum cpsw_ale_control {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH net-next 09/10] net: netcp: ale: use ale_status to size the ale table
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA, linux-omap-u79uwXL29TY76Z2rM5mHXA,
grygorii.strashko-l0cyMroinI0, mugunthanvnm-l0cyMroinI0,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, arnd-r2nGTMty4D4,
davem-fT/PcQaiUtIeIZ0/mPfg9Q, devicetree-u79uwXL29TY76Z2rM5mHXA,
mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
ALE h/w on newer version of NetCP (K2E/L/G) does provide a ALE_STATUS
register for the size of the ALE Table implemented in h/w. Currently
for example we set ALE Table size to 1024 for NetCP ALE on
K2E even though the ALE Status/Documentation shows it has 8192 entries.
So take advantage of this register to read the size of ALE table supported
and use that value in the driver for the newer version of NetCP ALE.
For NetCP lite, ALE Table size is much less (64) and indicated by a size
of zero in ALE_STATUS. So use that as a default for now. While at it,
also fix the ale table size on 10G switch to 2048 per User guide
http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf
Signed-off-by: Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>
Signed-off-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
---
drivers/net/ethernet/ti/cpsw_ale.c | 31 ++++++++++++++++++++++++++++++-
drivers/net/ethernet/ti/netcp_ethss.c | 4 +---
2 files changed, 31 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index e15db39..62a18d6 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -33,6 +33,7 @@
/* ALE Registers */
#define ALE_IDVER 0x00
+#define ALE_STATUS 0x04
#define ALE_CONTROL 0x08
#define ALE_PRESCALE 0x10
#define ALE_UNKNOWNVLAN 0x18
@@ -58,6 +59,10 @@
#define ALE_UCAST_OUI 2
#define ALE_UCAST_TOUCHED 3
+#define ALE_TABLE_SIZE_MULTIPLIER 1024
+#define ALE_STATUS_SIZE_MASK 0x1f
+#define ALE_TABLE_SIZE_DEFAULT 64
+
static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits)
{
int idx;
@@ -728,7 +733,7 @@ static void cpsw_ale_timer(unsigned long arg)
void cpsw_ale_start(struct cpsw_ale *ale)
{
- u32 rev;
+ u32 rev, ale_entries;
rev = __raw_readl(ale->params.ale_regs + ALE_IDVER);
if (!ale->params.major_ver_mask)
@@ -740,6 +745,30 @@ void cpsw_ale_start(struct cpsw_ale *ale)
ALE_VERSION_MAJOR(rev, ale->params.major_ver_mask),
ALE_VERSION_MINOR(rev));
+ if (!ale->params.ale_entries) {
+ ale_entries =
+ __raw_readl(ale->params.ale_regs + ALE_STATUS) &
+ ALE_STATUS_SIZE_MASK;
+ /* ALE available on newer NetCP switches has introduced
+ * a register, ALE_STATUS, to indicate the size of ALE
+ * table which shows the size as a multiple of 1024 entries.
+ * For these, params.ale_entries will be set to zero. So
+ * read the register and update the value of ale_entries.
+ * ALE table on NetCP lite, is much smaller and is indicated
+ * by a value of zero in ALE_STATUS. So use a default value
+ * of ALE_TABLE_SIZE_DEFAULT for this. Caller is expected
+ * to set the value of ale_entries for all other versions
+ * of ALE.
+ */
+ if (!ale_entries)
+ ale_entries = ALE_TABLE_SIZE_DEFAULT;
+ else
+ ale_entries *= ALE_TABLE_SIZE_MULTIPLIER;
+ ale->params.ale_entries = ale_entries;
+ }
+ dev_info(ale->params.dev,
+ "ALE Table size %ld\n", ale->params.ale_entries);
+
if (ale->params.nu_switch_ale) {
/* Separate registers for unknown vlan configuration.
* Also there are N bits, where N is number of ale
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index b37fb73..80d68cb 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -94,7 +94,6 @@
#define GBENU_CPTS_OFFSET 0x1d000
#define GBENU_ALE_OFFSET 0x1e000
#define GBENU_HOST_PORT_NUM 0
-#define GBENU_NUM_ALE_ENTRIES 1024
/* 10G Ethernet SS defines */
#define XGBE_MODULE_NAME "netcp-xgbe"
@@ -114,7 +113,7 @@
#define XGBE10_ALE_OFFSET 0x700
#define XGBE10_HW_STATS_OFFSET 0x800
#define XGBE10_HOST_PORT_NUM 0
-#define XGBE10_NUM_ALE_ENTRIES 1024
+#define XGBE10_NUM_ALE_ENTRIES 2048
#define GBE_TIMER_INTERVAL (HZ / 2)
@@ -3548,7 +3547,6 @@ static int set_gbenu_ethss_priv(struct gbe_priv *gbe_dev,
gbe_dev->ale_reg = gbe_dev->switch_regs + GBENU_ALE_OFFSET;
gbe_dev->ale_ports = gbe_dev->max_num_ports;
gbe_dev->host_port = GBENU_HOST_PORT_NUM;
- gbe_dev->ale_entries = GBE13_NUM_ALE_ENTRIES;
gbe_dev->stats_en_mask = (1 << (gbe_dev->max_num_ports)) - 1;
/* Subsystem registers */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH net-next 08/10] net: netcp: ale: update to support unknown vlan controls for NU switch
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
In NU Ethernet switch used on some of the Keystone SoCs, there is
separate UNKNOWNVLAN register for membership, unreg mcast flood, reg
mcast flood and force untag egress bits in ALE. So control for these
fields require different address offset, shift and size of field.
As this ALE has the same version number as ALE in CPSW found on other
SoCs, customazation based on version number is not possible. So
use a configuration parameter, nu_switch_ale, to identify the ALE
ALE found in NU Switch. Different treatment is needed for NU Switch
ALE due to difference in the ale table bits, separate unknown vlan
registers etc. The register information available in ale_controls,
needs to be updated to support the netcp NU switch h/w. So it is not
constant array any more since it needs to be updated based
on ALE type. The header of the file is also updated to indicate it
supports N port switch ALE, not just 3 port. The version mask is
3 bits in NU Switch ALE vs 8 bits on other ALE types.
While at it, change the debug print to info print so that ALE
version gets displayed in boot log.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
drivers/net/ethernet/ti/cpsw_ale.c | 50 +++++++++++++++++++++++++++++++----
drivers/net/ethernet/ti/cpsw_ale.h | 13 ++++++++-
drivers/net/ethernet/ti/netcp_ethss.c | 5 +++-
3 files changed, 61 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 43b061b..e15db39 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -1,5 +1,5 @@
/*
- * Texas Instruments 3-Port Ethernet Switch Address Lookup Engine
+ * Texas Instruments N-Port Ethernet Switch Address Lookup Engine
*
* Copyright (C) 2012 Texas Instruments
*
@@ -27,8 +27,9 @@
#define BITMASK(bits) (BIT(bits) - 1)
-#define ALE_VERSION_MAJOR(rev) ((rev >> 8) & 0xff)
+#define ALE_VERSION_MAJOR(rev, mask) (((rev) >> 8) & (mask))
#define ALE_VERSION_MINOR(rev) (rev & 0xff)
+#define ALE_VERSION_1R4 0x0104
/* ALE Registers */
#define ALE_IDVER 0x00
@@ -39,6 +40,12 @@
#define ALE_TABLE 0x34
#define ALE_PORTCTL 0x40
+/* ALE NetCP NU switch specific Registers */
+#define ALE_UNKNOWNVLAN_MEMBER 0x90
+#define ALE_UNKNOWNVLAN_UNREG_MCAST_FLOOD 0x94
+#define ALE_UNKNOWNVLAN_REG_MCAST_FLOOD 0x98
+#define ALE_UNKNOWNVLAN_FORCE_UNTAG_EGRESS 0x9C
+
#define ALE_TABLE_WRITE BIT(31)
#define ALE_TYPE_FREE 0
@@ -464,7 +471,7 @@ struct ale_control_info {
int bits;
};
-static const struct ale_control_info ale_controls[ALE_NUM_CONTROLS] = {
+static struct ale_control_info ale_controls[ALE_NUM_CONTROLS] = {
[ALE_ENABLE] = {
.name = "enable",
.offset = ALE_CONTROL,
@@ -724,8 +731,41 @@ void cpsw_ale_start(struct cpsw_ale *ale)
u32 rev;
rev = __raw_readl(ale->params.ale_regs + ALE_IDVER);
- dev_dbg(ale->params.dev, "initialized cpsw ale revision %d.%d\n",
- ALE_VERSION_MAJOR(rev), ALE_VERSION_MINOR(rev));
+ if (!ale->params.major_ver_mask)
+ ale->params.major_ver_mask = 0xff;
+ ale->version =
+ (ALE_VERSION_MAJOR(rev, ale->params.major_ver_mask) << 8) |
+ ALE_VERSION_MINOR(rev);
+ dev_info(ale->params.dev, "initialized cpsw ale version %d.%d\n",
+ ALE_VERSION_MAJOR(rev, ale->params.major_ver_mask),
+ ALE_VERSION_MINOR(rev));
+
+ if (ale->params.nu_switch_ale) {
+ /* Separate registers for unknown vlan configuration.
+ * Also there are N bits, where N is number of ale
+ * ports and shift value should be 0
+ */
+ ale_controls[ALE_PORT_UNKNOWN_VLAN_MEMBER].bits =
+ ale->params.ale_ports;
+ ale_controls[ALE_PORT_UNKNOWN_VLAN_MEMBER].offset =
+ ALE_UNKNOWNVLAN_MEMBER;
+ ale_controls[ALE_PORT_UNKNOWN_MCAST_FLOOD].bits =
+ ale->params.ale_ports;
+ ale_controls[ALE_PORT_UNKNOWN_MCAST_FLOOD].shift = 0;
+ ale_controls[ALE_PORT_UNKNOWN_MCAST_FLOOD].offset =
+ ALE_UNKNOWNVLAN_UNREG_MCAST_FLOOD;
+ ale_controls[ALE_PORT_UNKNOWN_REG_MCAST_FLOOD].bits =
+ ale->params.ale_ports;
+ ale_controls[ALE_PORT_UNKNOWN_REG_MCAST_FLOOD].shift = 0;
+ ale_controls[ALE_PORT_UNKNOWN_REG_MCAST_FLOOD].offset =
+ ALE_UNKNOWNVLAN_REG_MCAST_FLOOD;
+ ale_controls[ALE_PORT_UNTAGGED_EGRESS].bits =
+ ale->params.ale_ports;
+ ale_controls[ALE_PORT_UNTAGGED_EGRESS].shift = 0;
+ ale_controls[ALE_PORT_UNTAGGED_EGRESS].offset =
+ ALE_UNKNOWNVLAN_FORCE_UNTAG_EGRESS;
+ }
+
cpsw_ale_control_set(ale, 0, ALE_ENABLE, 1);
cpsw_ale_control_set(ale, 0, ALE_CLEAR, 1);
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index a700189..b1c7954 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -1,5 +1,5 @@
/*
- * Texas Instruments 3-Port Ethernet Switch Address Lookup Engine APIs
+ * Texas Instruments N-Port Ethernet Switch Address Lookup Engine APIs
*
* Copyright (C) 2012 Texas Instruments
*
@@ -21,6 +21,16 @@ struct cpsw_ale_params {
unsigned long ale_ageout; /* in secs */
unsigned long ale_entries;
unsigned long ale_ports;
+ /* NU Switch has specific handling as number of bits in ALE entries
+ * are different than other versions of ALE. Also there are specific
+ * registers for unknown vlan specific fields. So use nu_switch_ale
+ * to identify this hardware.
+ */
+ bool nu_switch_ale;
+ /* mask bit used in NU Switch ALE is 3 bits instead of 8 bits. So
+ * pass it from caller.
+ */
+ u32 major_ver_mask;
};
struct cpsw_ale {
@@ -28,6 +38,7 @@ struct cpsw_ale {
struct timer_list timer;
unsigned long ageout;
int allmulti;
+ u32 version;
};
enum cpsw_ale_control {
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index 4b2a911..b37fb73 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -3716,7 +3716,10 @@ static int gbe_probe(struct netcp_device *netcp_device, struct device *dev,
ale_params.ale_ageout = GBE_DEFAULT_ALE_AGEOUT;
ale_params.ale_entries = gbe_dev->ale_entries;
ale_params.ale_ports = gbe_dev->ale_ports;
-
+ if (IS_SS_ID_MU(gbe_dev)) {
+ ale_params.major_ver_mask = 0x7;
+ ale_params.nu_switch_ale = true;
+ }
gbe_dev->ale = cpsw_ale_create(&ale_params);
if (!gbe_dev->ale) {
dev_err(gbe_dev->dev, "error initializing ale engine\n");
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 07/10] net: netcp: use hw capability to remove FCS word from rx packets
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
Some of the newer Ethernet switch hw (such as that on k2e/l/g) can
strip the Etherenet FCS from packet at the port 0 egress of the switch.
So use this capability instead of doing it in software.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
drivers/net/ethernet/ti/netcp.h | 2 ++
drivers/net/ethernet/ti/netcp_core.c | 8 ++++++--
drivers/net/ethernet/ti/netcp_ethss.c | 10 ++++++++--
3 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp.h b/drivers/net/ethernet/ti/netcp.h
index d243c5d..8900a6f 100644
--- a/drivers/net/ethernet/ti/netcp.h
+++ b/drivers/net/ethernet/ti/netcp.h
@@ -102,6 +102,8 @@ struct netcp_intf {
void *rx_fdq[KNAV_DMA_FDQ_PER_CHAN];
struct napi_struct rx_napi;
struct napi_struct tx_napi;
+#define ETH_SW_CAN_REMOVE_ETH_FCS BIT(0)
+ u32 hw_cap;
/* 64-bit netcp stats */
struct netcp_stats stats;
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index b077ed4..68a75cc 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -739,8 +739,12 @@ static int netcp_process_one_rx_packet(struct netcp_intf *netcp)
dev_dbg(netcp->ndev_dev, "mismatch in packet size(%d) & sum of fragments(%d)\n",
pkt_sz, accum_sz);
- /* Remove ethernet FCS from the packet */
- __pskb_trim(skb, skb->len - ETH_FCS_LEN);
+ /* Newer version of the Ethernet switch can trim the Ethernet FCS
+ * from the packet and is indicated in hw_cap. So trim it only for
+ * older h/w
+ */
+ if (!(netcp->hw_cap & ETH_SW_CAN_REMOVE_ETH_FCS))
+ __pskb_trim(skb, skb->len - ETH_FCS_LEN);
/* Call each of the RX hooks */
p_info.skb = skb;
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index 9266961..4b2a911 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -133,6 +133,7 @@
#define MACSL_FULLDUPLEX BIT(0)
#define GBE_CTL_P0_ENABLE BIT(2)
+#define ETH_SW_CTL_P0_TX_CRC_REMOVE BIT(13)
#define GBE13_REG_VAL_STAT_ENABLE_ALL 0xff
#define XGBE_REG_VAL_STAT_ENABLE_ALL 0xf
#define GBE_STATS_CD_SEL BIT(28)
@@ -2847,7 +2848,7 @@ static int gbe_open(void *intf_priv, struct net_device *ndev)
struct netcp_intf *netcp = netdev_priv(ndev);
struct gbe_slave *slave = gbe_intf->slave;
int port_num = slave->port_num;
- u32 reg;
+ u32 reg, val;
int ret;
reg = readl(GBE_REG_ADDR(gbe_dev, switch_regs, id_ver));
@@ -2877,7 +2878,12 @@ static int gbe_open(void *intf_priv, struct net_device *ndev)
writel(0, GBE_REG_ADDR(gbe_dev, switch_regs, ptype));
/* Control register */
- writel(GBE_CTL_P0_ENABLE, GBE_REG_ADDR(gbe_dev, switch_regs, control));
+ val = GBE_CTL_P0_ENABLE;
+ if (IS_SS_ID_MU(gbe_dev)) {
+ val |= ETH_SW_CTL_P0_TX_CRC_REMOVE;
+ netcp->hw_cap = ETH_SW_CAN_REMOVE_ETH_FCS;
+ }
+ writel(val, GBE_REG_ADDR(gbe_dev, switch_regs, control));
/* All statistics enabled and STAT AB visible by default */
writel(gbe_dev->stats_en_mask, GBE_REG_ADDR(gbe_dev, switch_regs,
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 04/10] net: netcp: remove the redundant memmov()
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
The psdata is populated with command data by netcp modules
to the tail of the buffer and set_words() copy the same
to the front of the psdata. So remove the redundant memmov
function call.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
---
drivers/net/ethernet/ti/netcp_core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index a136c56..286fd8d 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1226,9 +1226,9 @@ static int netcp_tx_submit_skb(struct netcp_intf *netcp,
/* psdata points to both native-endian and device-endian data */
__le32 *psdata = (void __force *)p_info.psdata;
- memmove(p_info.psdata, p_info.psdata + p_info.psdata_len,
- p_info.psdata_len);
- set_words(p_info.psdata, p_info.psdata_len, psdata);
+ set_words((u32 *)psdata +
+ (KNAV_DMA_NUM_PS_WORDS - p_info.psdata_len),
+ p_info.psdata_len, psdata);
tmp |= (p_info.psdata_len & KNAV_DMA_DESC_PSLEN_MASK) <<
KNAV_DMA_DESC_PSLEN_SHIFT;
}
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 02/10] net: netcp: ethss: add support of 10gbe pcsr link status
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
From: WingMan Kwok <w-kwok2@ti.com>
The 10GBASE-R Physical Coding Sublayer (PCS-R) module provides
functionality of a physical coding sublayer (PCS) on data being
transferred between a demuxed XGMII and SerDes supporting a 16
or 32 bit interface. From the driver point of view, whether
a ethernet link is up or not depends also on the status of the
block-lock bit of the PCSR. This patch adds the checking of that
bit in order to determine the link status.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
.../devicetree/bindings/net/keystone-netcp.txt | 3 ++
drivers/net/ethernet/ti/netcp_ethss.c | 37 ++++++++++++++++++++--
2 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
index 0854a73..57fc13f 100644
--- a/Documentation/devicetree/bindings/net/keystone-netcp.txt
+++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
@@ -75,6 +75,9 @@ Required properties:
- syscon-subsys: phandle to syscon node of the switch
subsystem registers.
+- syscon-pcsr: (10gbe only) phandle to syscon node of the
+ switch PCSR registers.
+
- reg: register location and the size for the following register
regions in the specified order.
- switch subsystem registers
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index 473edda1..cb48f88 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -63,6 +63,12 @@
#define GBE13_ALE_OFFSET 0x600
#define GBE13_HOST_PORT_NUM 0
#define GBE13_NUM_ALE_ENTRIES 1024
+/* offset relative to PCSR regmap */
+#define XGBE10_PCSR_OFFSET(x) ((x) * 0x80)
+#define XGBE10_PCSR_RX_STATUS(x) (XGBE10_PCSR_OFFSET(x) + 0x0C)
+
+#define XGBE10_PCSR_BLOCK_LOCK_MASK BIT(30)
+#define XGBE10_PCSR_BLOCK_LOCK_SHIFT 30
/* 1G Ethernet NU SS defines */
#define GBENU_MODULE_NAME "netcp-gbenu"
@@ -2111,6 +2117,10 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev,
if (phy)
phy_print_status(phy);
+ else if (slave->link_interface == XGMII_LINK_MAC_MAC_FORCED) {
+ netdev_printk(KERN_INFO, ndev,
+ "Link is %s\n", (up ? "Up" : "Down"));
+ }
}
static bool gbe_phy_link_status(struct gbe_slave *slave)
@@ -2123,18 +2133,29 @@ static void netcp_ethss_update_link_state(struct gbe_priv *gbe_dev,
struct net_device *ndev)
{
int sp = slave->slave_num;
- int phy_link_state, sgmii_link_state = 1, link_state;
+ int phy_link_state, sw_link_state = 1, link_state, ret;
+ u32 pcsr_rx_stat;
if (!slave->open)
return;
if (!SLAVE_LINK_IS_XGMII(slave)) {
- sgmii_link_state =
+ sw_link_state =
netcp_sgmii_get_port_link(SGMII_BASE(gbe_dev, sp), sp);
+ } else if (slave->link_interface == XGMII_LINK_MAC_MAC_FORCED) {
+ /* read status from pcsr status reg */
+ ret = regmap_read(gbe_dev->pcsr_regmap,
+ XGBE10_PCSR_RX_STATUS(sp), &pcsr_rx_stat);
+
+ if (ret)
+ return;
+
+ sw_link_state = (pcsr_rx_stat & XGBE10_PCSR_BLOCK_LOCK_MASK) >>
+ XGBE10_PCSR_BLOCK_LOCK_SHIFT;
}
phy_link_state = gbe_phy_link_status(slave);
- link_state = phy_link_state & sgmii_link_state;
+ link_state = phy_link_state & sw_link_state;
if (atomic_xchg(&slave->link_state, link_state) != link_state)
netcp_ethss_link_state_action(gbe_dev, ndev, slave,
@@ -3154,6 +3175,16 @@ static int set_xgbe_ethss10_priv(struct gbe_priv *gbe_dev,
return PTR_ERR(gbe_dev->ss_regmap);
}
+ gbe_dev->pcsr_regmap = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pcsr");
+
+ if (IS_ERR(gbe_dev->pcsr_regmap)) {
+ dev_err(gbe_dev->dev,
+ "pcsr regmap lookup failed: %ld\n",
+ PTR_ERR(gbe_dev->pcsr_regmap));
+ return PTR_ERR(gbe_dev->pcsr_regmap);
+ }
+
ret = of_address_to_resource(node, XGBE_SM_REG_INDEX, &res);
if (ret) {
dev_err(gbe_dev->dev,
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 01/10] net: netcp: ethss: add support of subsystem register region regmap
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev, linux-omap, grygorii.strashko, mugunthanvnm, linux-kernel,
arnd, davem, devicetree, mark.rutland, robh+dt
In-Reply-To: <1482271793-7671-1-git-send-email-m-karicheri2@ti.com>
From: WingMan Kwok <w-kwok2@ti.com>
10gbe phy driver needs to access the 10gbe subsystem control
register during phy initialization. To facilitate the shared
access of the subsystem register region between the 10gbe Ethernet
driver and the phy driver, this patch adds support of the
subsystem register region defined by a syscon node in the dts.
Although there is no shared access to the gbe subsystem register
region, using syscon for that is for the sake of consistency.
This change is backward compatible with previously released gbe
devicetree bindings.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
.../devicetree/bindings/net/keystone-netcp.txt | 16 ++-
drivers/net/ethernet/ti/netcp_ethss.c | 140 +++++++++++++++++----
2 files changed, 127 insertions(+), 29 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
index 04ba1dc..0854a73 100644
--- a/Documentation/devicetree/bindings/net/keystone-netcp.txt
+++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
@@ -72,20 +72,24 @@ Required properties:
"ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2)
"ti,netcp-xgbe" for 10 GbE
+- syscon-subsys: phandle to syscon node of the switch
+ subsystem registers.
+
- reg: register location and the size for the following register
regions in the specified order.
- switch subsystem registers
+ - sgmii module registers
- sgmii port3/4 module registers (only for NetCP 1.4)
- switch module registers
- serdes registers (only for 10G)
NetCP 1.4 ethss, here is the order
- index #0 - switch subsystem registers
+ index #0 - sgmii module registers
index #1 - sgmii port3/4 module registers
index #2 - switch module registers
NetCP 1.5 ethss 9 port, 5 port and 2 port
- index #0 - switch subsystem registers
+ index #0 - sgmii module registers
index #1 - switch module registers
index #2 - serdes registers
@@ -145,6 +149,11 @@ Optional properties:
Example binding:
+gbe_subsys: subsys@2090000 {
+ compatible = "syscon";
+ reg = <0x02090000 0x100>;
+};
+
netcp: netcp@2000000 {
reg = <0x2620110 0x8>;
reg-names = "efuse";
@@ -163,7 +172,8 @@ netcp: netcp@2000000 {
ranges;
gbe@90000 {
label = "netcp-gbe";
- reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+ syscon-subsys = <&gbe_subsys>;
+ reg = <0x90100 0x200>, <0x90400 0x200>, <0x90800 0x700>;
/* enable-ale; */
tx-queue = <648>;
tx-channel = <8>;
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index c7e547e..473edda1 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -19,9 +19,11 @@
*/
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_mdio.h>
#include <linux/of_address.h>
+#include <linux/regmap.h>
#include <linux/if_vlan.h>
#include <linux/ptp_classify.h>
#include <linux/net_tstamp.h>
@@ -43,7 +45,10 @@
#define GBE_MODULE_NAME "netcp-gbe"
#define GBE_SS_VERSION_14 0x4ed21104
+/* for devicetree backward compatible only */
#define GBE_SS_REG_INDEX 0
+
+#define GBE_SGMII_REG_INDEX 0
#define GBE_SGMII34_REG_INDEX 1
#define GBE_SM_REG_INDEX 2
/* offset relative to base of GBE_SS_REG_INDEX */
@@ -71,9 +76,11 @@
#define IS_SS_ID_NU(d) \
(GBE_IDENT((d)->ss_version) == GBE_SS_ID_NU)
-#define GBENU_SS_REG_INDEX 0
+#define GBENU_SGMII_REG_INDEX 0
#define GBENU_SM_REG_INDEX 1
+/* offset relative to base of GBE_SS_REG_INDEX */
#define GBENU_SGMII_MODULE_OFFSET 0x100
+/* offset relative to base of GBENU_SM_REG_INDEX */
#define GBENU_HOST_PORT_OFFSET 0x1000
#define GBENU_SLAVE_PORT_OFFSET 0x2000
#define GBENU_EMAC_OFFSET 0x2330
@@ -82,13 +89,12 @@
#define GBENU_ALE_OFFSET 0x1e000
#define GBENU_HOST_PORT_NUM 0
#define GBENU_NUM_ALE_ENTRIES 1024
-#define GBENU_SGMII_MODULE_SIZE 0x100
/* 10G Ethernet SS defines */
#define XGBE_MODULE_NAME "netcp-xgbe"
#define XGBE_SS_VERSION_10 0x4ee42100
-#define XGBE_SS_REG_INDEX 0
+#define XGBE_SGMII_REG_INDEX 0
#define XGBE_SM_REG_INDEX 1
#define XGBE_SERDES_REG_INDEX 2
@@ -173,6 +179,7 @@
#define XGBE_SET_REG_OFS(p, rb, rn) p->rb##_ofs.rn = \
offsetof(struct xgbe##_##rb, rn)
#define GBE_REG_ADDR(p, rb, rn) (p->rb + p->rb##_ofs.rn)
+#define GBE_REG_OFS(p, rb, rn) ((p)->rb##_ofs.rn)
#define HOST_TX_PRI_MAP_DEFAULT 0x00000000
@@ -225,6 +232,7 @@
/* The PTP event messages - Sync, Delay_Req, Pdelay_Req, and Pdelay_Resp. */
#define EVENT_MSG_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
#endif /* CONFIG_TI_CPTS */
+#define SGMII_MODULE_SIZE 0x100
struct xgbe_ss_regs {
u32 id_ver;
@@ -716,7 +724,9 @@ struct gbe_priv {
u32 ss_version;
u32 stats_en_mask;
- void __iomem *ss_regs;
+ struct regmap *ss_regmap;
+ struct regmap *pcsr_regmap;
+ void __iomem *ss_regs;
void __iomem *switch_regs;
void __iomem *host_port_regs;
void __iomem *ale_reg;
@@ -2192,7 +2202,7 @@ static void gbe_port_config(struct gbe_priv *gbe_dev, struct gbe_slave *slave,
int max_rx_len)
{
void __iomem *rx_maxlen_reg;
- u32 xgmii_mode;
+ int ret;
if (max_rx_len > NETCP_MAX_FRAME_SIZE)
max_rx_len = NETCP_MAX_FRAME_SIZE;
@@ -2200,9 +2210,16 @@ static void gbe_port_config(struct gbe_priv *gbe_dev, struct gbe_slave *slave,
/* Enable correct MII mode at SS level */
if ((gbe_dev->ss_version == XGBE_SS_VERSION_10) &&
(slave->link_interface >= XGMII_LINK_MAC_PHY)) {
- xgmii_mode = readl(GBE_REG_ADDR(gbe_dev, ss_regs, control));
- xgmii_mode |= (1 << slave->slave_num);
- writel(xgmii_mode, GBE_REG_ADDR(gbe_dev, ss_regs, control));
+ ret = regmap_update_bits(gbe_dev->ss_regmap,
+ GBE_REG_OFS(gbe_dev, ss_regs, control),
+ 1 << slave->slave_num,
+ 1 << slave->slave_num);
+
+ if (ret) {
+ dev_err(gbe_dev->dev,
+ "regmap update xgmii mode bit Failed\n");
+ return;
+ }
}
if (IS_SS_ID_MU(gbe_dev))
@@ -3127,35 +3144,46 @@ static int set_xgbe_ethss10_priv(struct gbe_priv *gbe_dev,
void __iomem *regs;
int ret, i;
- ret = of_address_to_resource(node, XGBE_SS_REG_INDEX, &res);
+ gbe_dev->ss_regmap = syscon_regmap_lookup_by_phandle(node,
+ "syscon-subsys");
+
+ if (IS_ERR(gbe_dev->ss_regmap)) {
+ dev_err(gbe_dev->dev,
+ "subsys regmap lookup failed: %ld\n",
+ PTR_ERR(gbe_dev->ss_regmap));
+ return PTR_ERR(gbe_dev->ss_regmap);
+ }
+
+ ret = of_address_to_resource(node, XGBE_SM_REG_INDEX, &res);
if (ret) {
dev_err(gbe_dev->dev,
- "Can't xlate xgbe of node(%s) ss address at %d\n",
- node->name, XGBE_SS_REG_INDEX);
+ "Can't xlate xgbe of node(%s) sm address at %d\n",
+ node->name, XGBE_SM_REG_INDEX);
return ret;
}
regs = devm_ioremap_resource(gbe_dev->dev, &res);
if (IS_ERR(regs)) {
- dev_err(gbe_dev->dev, "Failed to map xgbe ss register base\n");
+ dev_err(gbe_dev->dev, "Failed to map xgbe sm register base\n");
return PTR_ERR(regs);
}
- gbe_dev->ss_regs = regs;
+ gbe_dev->switch_regs = regs;
- ret = of_address_to_resource(node, XGBE_SM_REG_INDEX, &res);
+ ret = of_address_to_resource(node, XGBE_SGMII_REG_INDEX, &res);
if (ret) {
dev_err(gbe_dev->dev,
- "Can't xlate xgbe of node(%s) sm address at %d\n",
- node->name, XGBE_SM_REG_INDEX);
+ "Can't xlate xgbe of node(%s) sgmii address at %d\n",
+ node->name, XGBE_SGMII_REG_INDEX);
return ret;
}
regs = devm_ioremap_resource(gbe_dev->dev, &res);
if (IS_ERR(regs)) {
- dev_err(gbe_dev->dev, "Failed to map xgbe sm register base\n");
+ dev_err(gbe_dev->dev,
+ "Failed to map xgbe sgmii register base\n");
return PTR_ERR(regs);
}
- gbe_dev->switch_regs = regs;
+ gbe_dev->sgmii_port_regs = regs;
ret = of_address_to_resource(node, XGBE_SERDES_REG_INDEX, &res);
if (ret) {
@@ -3171,6 +3199,8 @@ static int set_xgbe_ethss10_priv(struct gbe_priv *gbe_dev,
return PTR_ERR(regs);
}
gbe_dev->xgbe_serdes_regs = regs;
+ gbe_dev->sgmii_port34_regs = gbe_dev->sgmii_port_regs +
+ (2 * SGMII_MODULE_SIZE);
gbe_dev->num_stats_mods = gbe_dev->max_num_ports;
gbe_dev->et_stats = xgbe10_et_stats;
@@ -3195,9 +3225,9 @@ static int set_xgbe_ethss10_priv(struct gbe_priv *gbe_dev,
}
gbe_dev->ss_version = XGBE_SS_VERSION_10;
- gbe_dev->sgmii_port_regs = gbe_dev->ss_regs +
- XGBE10_SGMII_MODULE_OFFSET;
- gbe_dev->host_port_regs = gbe_dev->ss_regs + XGBE10_HOST_PORT_OFFSET;
+
+ gbe_dev->host_port_regs = gbe_dev->switch_regs +
+ XGBE10_HOST_PORT_OFFSET;
for (i = 0; i < gbe_dev->max_num_ports; i++)
gbe_dev->hw_stats_regs[i] = gbe_dev->switch_regs +
@@ -3228,8 +3258,8 @@ static int set_xgbe_ethss10_priv(struct gbe_priv *gbe_dev,
return 0;
}
-static int get_gbe_resource_version(struct gbe_priv *gbe_dev,
- struct device_node *node)
+static int get_gbe_resource_version_ss_regs(struct gbe_priv *gbe_dev,
+ struct device_node *node)
{
struct resource res;
void __iomem *regs;
@@ -3248,8 +3278,27 @@ static int get_gbe_resource_version(struct gbe_priv *gbe_dev,
dev_err(gbe_dev->dev, "Failed to map gbe register base\n");
return PTR_ERR(regs);
}
+
gbe_dev->ss_regs = regs;
gbe_dev->ss_version = readl(gbe_dev->ss_regs);
+ gbe_dev->ss_regmap = NULL;
+ return 0;
+}
+
+static int get_gbe_resource_version(struct gbe_priv *gbe_dev,
+ struct device_node *node)
+{
+ gbe_dev->ss_regmap = syscon_regmap_lookup_by_phandle(node,
+ "syscon-subsys");
+ if (IS_ERR(gbe_dev->ss_regmap)) {
+ dev_dbg(gbe_dev->dev,
+ "subsys regmap lookup failed: %ld. try reg property\n",
+ PTR_ERR(gbe_dev->ss_regmap));
+ return get_gbe_resource_version_ss_regs(gbe_dev, node);
+ }
+
+ regmap_read(gbe_dev->ss_regmap, 0, &gbe_dev->ss_version);
+ gbe_dev->ss_regs = NULL;
return 0;
}
@@ -3260,6 +3309,27 @@ static int set_gbe_ethss14_priv(struct gbe_priv *gbe_dev,
void __iomem *regs;
int i, ret;
+ if (gbe_dev->ss_regs) {
+ gbe_dev->sgmii_port_regs = gbe_dev->ss_regs +
+ GBE13_SGMII_MODULE_OFFSET;
+ } else {
+ ret = of_address_to_resource(node, GBE_SGMII_REG_INDEX, &res);
+ if (ret) {
+ dev_err(gbe_dev->dev,
+ "Can't translate of gbe node(%s) address at index %d\n",
+ node->name, GBE_SGMII_REG_INDEX);
+ return ret;
+ }
+
+ regs = devm_ioremap_resource(gbe_dev->dev, &res);
+ if (IS_ERR(regs)) {
+ dev_err(gbe_dev->dev,
+ "Failed to map gbe sgmii port register base\n");
+ return PTR_ERR(regs);
+ }
+ gbe_dev->sgmii_port_regs = regs;
+ }
+
ret = of_address_to_resource(node, GBE_SGMII34_REG_INDEX, &res);
if (ret) {
dev_err(gbe_dev->dev,
@@ -3314,7 +3384,6 @@ static int set_gbe_ethss14_priv(struct gbe_priv *gbe_dev,
return -ENOMEM;
}
- gbe_dev->sgmii_port_regs = gbe_dev->ss_regs + GBE13_SGMII_MODULE_OFFSET;
gbe_dev->host_port_regs = gbe_dev->switch_regs + GBE13_HOST_PORT_OFFSET;
/* K2HK has only 2 hw stats modules visible at a time, so
@@ -3402,14 +3471,33 @@ static int set_gbenu_ethss_priv(struct gbe_priv *gbe_dev,
}
gbe_dev->switch_regs = regs;
- gbe_dev->sgmii_port_regs = gbe_dev->ss_regs + GBENU_SGMII_MODULE_OFFSET;
+ if (gbe_dev->ss_regs) {
+ gbe_dev->sgmii_port_regs = gbe_dev->ss_regs +
+ GBENU_SGMII_MODULE_OFFSET;
+ } else {
+ ret = of_address_to_resource(node, GBENU_SGMII_REG_INDEX, &res);
+ if (ret) {
+ dev_err(gbe_dev->dev,
+ "Can't translate of gbenu node(%s) addr at index %d\n",
+ node->name, GBENU_SGMII_REG_INDEX);
+ return ret;
+ }
+
+ regs = devm_ioremap_resource(gbe_dev->dev, &res);
+ if (IS_ERR(regs)) {
+ dev_err(gbe_dev->dev,
+ "Failed to map gbenu sgmii port register base\n");
+ return PTR_ERR(regs);
+ }
+ gbe_dev->sgmii_port_regs = regs;
+ }
/* Although sgmii modules are mem mapped to one contiguous
* region on GBENU devices, setting sgmii_port34_regs allows
* consistent code when accessing sgmii api
*/
gbe_dev->sgmii_port34_regs = gbe_dev->sgmii_port_regs +
- (2 * GBENU_SGMII_MODULE_SIZE);
+ (2 * SGMII_MODULE_SIZE);
gbe_dev->host_port_regs = gbe_dev->switch_regs + GBENU_HOST_PORT_OFFSET;
--
1.9.1
^ permalink raw reply related
* [PATCH net-next 00/10] netcp: enhancements and minor fixes
From: Murali Karicheri @ 2016-12-20 22:09 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA, linux-omap-u79uwXL29TY76Z2rM5mHXA,
grygorii.strashko-l0cyMroinI0, mugunthanvnm-l0cyMroinI0,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, arnd-r2nGTMty4D4,
davem-fT/PcQaiUtIeIZ0/mPfg9Q, devicetree-u79uwXL29TY76Z2rM5mHXA,
mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
This series is for net-next. This propagates enhancements and minor
bug fixes from internal version of the driver to keep the upstream
in sync. Please review and apply if this looks good.
Tested on all of K2HK/E/L boards.
Thanks
Murali Karicheri
Michael Scherban (1):
net: netcp: store network statistics in 64 bits
Murali Karicheri (7):
net: netcp: extract eflag from desc for rx_hook handling
net: netcp: remove the redundant memmov()
net: netcp: ethss: get phy-handle only if link interface is MAC-to-PHY
net: netcp: use hw capability to remove FCS word from rx packets
net: netcp: ale: update to support unknown vlan controls for NU switch
net: netcp: ale: use ale_status to size the ale table
net: netcp: ale: add proper ale entry mask bits for netcp switch ALE
WingMan Kwok (2):
net: netcp: ethss: add support of subsystem register region regmap
net: netcp: ethss: add support of 10gbe pcsr link status
.../devicetree/bindings/net/keystone-netcp.txt | 19 +-
drivers/net/ethernet/ti/cpsw_ale.c | 180 ++++++++++++++++---
drivers/net/ethernet/ti/cpsw_ale.h | 17 +-
drivers/net/ethernet/ti/netcp.h | 21 +++
drivers/net/ethernet/ti/netcp_core.c | 102 ++++++++---
drivers/net/ethernet/ti/netcp_ethss.c | 200 +++++++++++++++++----
include/linux/soc/ti/knav_dma.h | 2 +
7 files changed, 456 insertions(+), 85 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: HalfSipHash Acceptable Usage
From: Theodore Ts'o @ 2016-12-20 21:36 UTC (permalink / raw)
To: Jason A. Donenfeld
Cc: Jean-Philippe Aumasson, Hannes Frederic Sowa, LKML, Eric Biggers,
Daniel J . Bernstein, David Laight, David Miller, Andi Kleen,
George Spelvin, kernel-hardening, Andy Lutomirski,
Linux Crypto Mailing List, Tom Herbert, Vegard Nossum, Netdev,
Linus Torvalds
In-Reply-To: <CAHmME9rPmH=wP_eHYopt8ZPG9TSN7bos3fGOuqKL2HjQW-2SWA@mail.gmail.com>
On Mon, Dec 19, 2016 at 06:32:44PM +0100, Jason A. Donenfeld wrote:
> 1) Anything that requires actual long-term security will use
> SipHash2-4, with the 64-bit output and the 128-bit key. This includes
> things like TCP sequence numbers. This seems pretty uncontroversial to
> me. Seem okay to you?
Um, why do TCP sequence numbers need long-term security? So long as
you rekey every 5 minutes or so, TCP sequence numbers don't need any
more security than that, since even if you break the key used to
generate initial sequence numbers seven a minute or two later, any
pending TCP connections will have timed out long before.
See the security analysis done in RFC 6528[1], where among other
things, it points out why MD5 is acceptable with periodic rekeying,
although there is the concern that this could break certain hueristics
used when establishing new connections during the TIME-WAIT state.
[1] https://tools.ietf.org/html/rfc6528
- Ted
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox