* [PATCH net-next 06/12] qede - mark SKB as encapsulated
From: Yuval Mintz @ 2017-01-01 11:57 UTC (permalink / raw)
To: davem, netdev; +Cc: Manish Chopra, Yuval Mintz
In-Reply-To: <1483271831-25890-1-git-send-email-Yuval.Mintz@cavium.com>
From: Manish Chopra <Manish.Chopra@cavium.com>
When driver receives a recognized encapsulated packet it needs
to set the skb->encapsulation field as well.
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
---
drivers/net/ethernet/qlogic/qede/qede_fp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index a06acab..dddae1e 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -607,8 +607,10 @@ static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag)
if (csum_flag & QEDE_CSUM_UNNECESSARY)
skb->ip_summed = CHECKSUM_UNNECESSARY;
- if (csum_flag & QEDE_TUNN_CSUM_UNNECESSARY)
+ if (csum_flag & QEDE_TUNN_CSUM_UNNECESSARY) {
skb->csum_level = 1;
+ skb->encapsulation = 1;
+ }
}
static inline void qede_skb_receive(struct qede_dev *edev,
--
1.9.3
^ permalink raw reply related
* [PATCH net-next 05/12] qede: Postpone reallocation until NAPI end
From: Yuval Mintz @ 2017-01-01 11:57 UTC (permalink / raw)
To: davem, netdev; +Cc: Yuval Mintz
In-Reply-To: <1483271831-25890-1-git-send-email-Yuval.Mintz@cavium.com>
During Rx flow driver allocates a replacement buffer each time
it consumes an Rx buffer. Failing to do so, it would consume the
currently processed buffer and re-post it on the ring.
As a result, the Rx ring is always completely full [from driver POV].
We now allow the Rx ring to shorten by doing the re-allocations
at the end of the NAPI run. The only limitation is that we still want to
make sure each time we reallocate that we'd still have sufficient
elements in the Rx ring to guarantee that FW would be able to post
additional data and trigger an interrupt.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
---
drivers/net/ethernet/qlogic/qede/qede.h | 7 +++++--
drivers/net/ethernet/qlogic/qede/qede_fp.c | 23 +++++++++++++++++++----
drivers/net/ethernet/qlogic/qede/qede_main.c | 3 ++-
3 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index ab49263..1c5aac4 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -280,7 +280,7 @@ struct qede_rx_queue {
u16 sw_rx_cons;
u16 sw_rx_prod;
- u16 num_rx_buffers; /* Slowpath */
+ u16 filled_buffers;
u8 data_direction;
u8 rxq_id;
@@ -293,6 +293,9 @@ struct qede_rx_queue {
struct qed_chain rx_bd_ring;
struct qed_chain rx_comp_ring ____cacheline_aligned;
+ /* Used once per each NAPI run */
+ u16 num_rx_buffers;
+
/* GRO */
struct qede_agg_info tpa_info[ETH_TPA_MAX_AGGS_NUM];
@@ -414,7 +417,7 @@ netdev_features_t qede_features_check(struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features);
void qede_tx_log_print(struct qede_dev *edev, struct qede_fastpath *fp);
-int qede_alloc_rx_buffer(struct qede_rx_queue *rxq);
+int qede_alloc_rx_buffer(struct qede_rx_queue *rxq, bool allow_lazy);
int qede_free_tx_pkt(struct qede_dev *edev,
struct qede_tx_queue *txq, int *len);
int qede_poll(struct napi_struct *napi, int budget);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index 1614eed..a06acab 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -46,13 +46,22 @@
* Content also used by slowpath *
*********************************/
-int qede_alloc_rx_buffer(struct qede_rx_queue *rxq)
+int qede_alloc_rx_buffer(struct qede_rx_queue *rxq, bool allow_lazy)
{
struct sw_rx_data *sw_rx_data;
struct eth_rx_bd *rx_bd;
dma_addr_t mapping;
struct page *data;
+ /* In case lazy-allocation is allowed, postpone allocation until the
+ * end of the NAPI run. We'd still need to make sure the Rx ring has
+ * sufficient buffers to guarantee an additional Rx interrupt.
+ */
+ if (allow_lazy && likely(rxq->filled_buffers > 12)) {
+ rxq->filled_buffers--;
+ return 0;
+ }
+
data = alloc_pages(GFP_ATOMIC, 0);
if (unlikely(!data))
return -ENOMEM;
@@ -79,6 +88,7 @@ int qede_alloc_rx_buffer(struct qede_rx_queue *rxq)
rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping));
rxq->sw_rx_prod++;
+ rxq->filled_buffers++;
return 0;
}
@@ -523,7 +533,7 @@ static inline int qede_realloc_rx_buffer(struct qede_rx_queue *rxq,
curr_cons->page_offset += rxq->rx_buf_seg_size;
if (curr_cons->page_offset == PAGE_SIZE) {
- if (unlikely(qede_alloc_rx_buffer(rxq))) {
+ if (unlikely(qede_alloc_rx_buffer(rxq, true))) {
/* Since we failed to allocate new buffer
* current buffer can be used again.
*/
@@ -1002,7 +1012,7 @@ static bool qede_rx_xdp(struct qede_dev *edev,
switch (act) {
case XDP_TX:
/* We need the replacement buffer before transmit. */
- if (qede_alloc_rx_buffer(rxq)) {
+ if (qede_alloc_rx_buffer(rxq, true)) {
qede_recycle_rx_bd_ring(rxq, 1);
return false;
}
@@ -1116,7 +1126,7 @@ static int qede_rx_build_jumbo(struct qede_dev *edev,
}
/* We need a replacement buffer for each BD */
- if (unlikely(qede_alloc_rx_buffer(rxq)))
+ if (unlikely(qede_alloc_rx_buffer(rxq, true)))
goto out;
/* Now that we've allocated the replacement buffer,
@@ -1293,6 +1303,11 @@ static int qede_rx_int(struct qede_fastpath *fp, int budget)
work_done++;
}
+ /* Allocate replacement buffers */
+ while (rxq->num_rx_buffers - rxq->filled_buffers)
+ if (qede_alloc_rx_buffer(rxq, false))
+ break;
+
/* Update producers */
qede_update_rx_prod(edev, rxq);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index a679d42..be4121c 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1154,8 +1154,9 @@ static int qede_alloc_mem_rxq(struct qede_dev *edev, struct qede_rx_queue *rxq)
goto err;
/* Allocate buffers for the Rx ring */
+ rxq->filled_buffers = 0;
for (i = 0; i < rxq->num_rx_buffers; i++) {
- rc = qede_alloc_rx_buffer(rxq);
+ rc = qede_alloc_rx_buffer(rxq, false);
if (rc) {
DP_ERR(edev,
"Rx buffers allocation failed at index %d\n", i);
--
1.9.3
^ permalink raw reply related
* [PATCH net-next 04/12] qed*: Change maximal number of queues
From: Yuval Mintz @ 2017-01-01 11:57 UTC (permalink / raw)
To: davem, netdev; +Cc: Yuval Mintz
In-Reply-To: <1483271831-25890-1-git-send-email-Yuval.Mintz@cavium.com>
Today qede requests contexts that would suffice for 64 'whole'
combined queues [192 meant for 64 rx, tx and xdp tx queues],
but registers netdev and limits the number of queues based on
information received by qed. In turn, qed doesn't take context
into account when informing qede how many queues it can support.
This would lead to a configuration problem in case user tries
configuring >64 combined queues to interface [or >96 in case
xdp isn't enabled]. Since we don't have a mangement firware
that actually provides so many interrupt lines to a single
device we're currently safe but that's about to change soon.
The new maximum is hence changed:
- For RoCE devices, the limit would remain 64.
- For non-RoCE devices, the limit might be higher [depending
on the actual configuration of the device].
qed would start enforcing that limit in both scenarios.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_l2.c | 32 ++++++++++++++++++++++------
drivers/net/ethernet/qlogic/qed/qed_main.c | 11 ++++++++++
drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +-
3 files changed, 37 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index fd153d2..03d31b3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -1753,13 +1753,31 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
int max_vf_mac_filters = 0;
if (cdev->int_params.out.int_mode == QED_INT_MODE_MSIX) {
- for_each_hwfn(cdev, i)
- info->num_queues +=
- FEAT_NUM(&cdev->hwfns[i], QED_PF_L2_QUE);
- if (cdev->int_params.fp_msix_cnt)
- info->num_queues =
- min_t(u8, info->num_queues,
- cdev->int_params.fp_msix_cnt);
+ u16 num_queues = 0;
+
+ /* Since the feature controls only queue-zones,
+ * make sure we have the contexts [rx, tx, xdp] to
+ * match.
+ */
+ for_each_hwfn(cdev, i) {
+ struct qed_hwfn *hwfn = &cdev->hwfns[i];
+ u16 l2_queues = (u16)FEAT_NUM(hwfn,
+ QED_PF_L2_QUE);
+ u16 cids;
+
+ cids = hwfn->pf_params.eth_pf_params.num_cons;
+ num_queues += min_t(u16, l2_queues, cids / 3);
+ }
+
+ /* queues might theoretically be >256, but interrupts'
+ * upper-limit guarantes that it would fit in a u8.
+ */
+ if (cdev->int_params.fp_msix_cnt) {
+ u8 irqs = cdev->int_params.fp_msix_cnt;
+
+ info->num_queues = (u8)min_t(u16,
+ num_queues, irqs);
+ }
} else {
info->num_queues = cdev->num_hwfns;
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index e156842..93eee83 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -877,6 +877,17 @@ static void qed_update_pf_params(struct qed_dev *cdev,
params->rdma_pf_params.gl_pi = QED_ROCE_PROTOCOL_INDEX;
}
+ /* In case we might support RDMA, don't allow qede to be greedy
+ * with the L2 contexts. Allow for 64 queues [rx, tx, xdp] per hwfn.
+ */
+ if (QED_LEADING_HWFN(cdev)->hw_info.personality ==
+ QED_PCI_ETH_ROCE) {
+ u16 *num_cons;
+
+ num_cons = ¶ms->eth_pf_params.num_cons;
+ *num_cons = min_t(u16, *num_cons, 192);
+ }
+
for (i = 0; i < cdev->num_hwfns; i++) {
struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 334e414..a679d42 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -753,7 +753,7 @@ static void qede_update_pf_params(struct qed_dev *cdev)
/* 64 rx + 64 tx + 64 XDP */
memset(&pf_params, 0, sizeof(struct qed_pf_params));
- pf_params.eth_pf_params.num_cons = 192;
+ pf_params.eth_pf_params.num_cons = (MAX_SB_PER_PF_MIMD - 1) * 3;
qed_ops->common->update_pf_params(cdev, &pf_params);
}
--
1.9.3
^ permalink raw reply related
* [PATCH net-next 03/12] qede: Split filtering logic to its own file
From: Yuval Mintz @ 2017-01-01 11:57 UTC (permalink / raw)
To: davem, netdev; +Cc: Yuval Mintz
In-Reply-To: <1483271831-25890-1-git-send-email-Yuval.Mintz@cavium.com>
This takes the various filtering logic of the driver and
moves them into their own dedicated file - qede_filter.c.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
---
drivers/net/ethernet/qlogic/qede/Makefile | 2 +-
drivers/net/ethernet/qlogic/qede/qede.h | 22 +
drivers/net/ethernet/qlogic/qede/qede_filter.c | 687 +++++++++++++++++++++++++
drivers/net/ethernet/qlogic/qede/qede_main.c | 654 -----------------------
4 files changed, 710 insertions(+), 655 deletions(-)
create mode 100644 drivers/net/ethernet/qlogic/qede/qede_filter.c
diff --git a/drivers/net/ethernet/qlogic/qede/Makefile b/drivers/net/ethernet/qlogic/qede/Makefile
index c54922b..38fbee6 100644
--- a/drivers/net/ethernet/qlogic/qede/Makefile
+++ b/drivers/net/ethernet/qlogic/qede/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_QEDE) := qede.o
-qede-y := qede_main.o qede_fp.o qede_ethtool.o
+qede-y := qede_main.o qede_fp.o qede_filter.o qede_ethtool.o
qede-$(CONFIG_DCB) += qede_dcbnl.o
qede-$(CONFIG_QED_RDMA) += qede_roce.o
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index b4e4196..ab49263 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -419,9 +419,31 @@ int qede_free_tx_pkt(struct qede_dev *edev,
struct qede_tx_queue *txq, int *len);
int qede_poll(struct napi_struct *napi, int budget);
irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie);
+
+/* Filtering function definitions */
+void qede_force_mac(void *dev, u8 *mac, bool forced);
+int qede_set_mac_addr(struct net_device *ndev, void *p);
+
+int qede_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid);
+int qede_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid);
+void qede_vlan_mark_nonconfigured(struct qede_dev *edev);
+int qede_configure_vlan_filters(struct qede_dev *edev);
+
+int qede_set_features(struct net_device *dev, netdev_features_t features);
+void qede_set_rx_mode(struct net_device *ndev);
+void qede_config_rx_mode(struct net_device *ndev);
+void qede_fill_rss_params(struct qede_dev *edev,
+ struct qed_update_vport_rss_params *rss, u8 *update);
+
+void qede_udp_tunnel_add(struct net_device *dev, struct udp_tunnel_info *ti);
+void qede_udp_tunnel_del(struct net_device *dev, struct udp_tunnel_info *ti);
+
+int qede_xdp(struct net_device *dev, struct netdev_xdp *xdp);
+
#ifdef CONFIG_DCB
void qede_set_dcbnl_ops(struct net_device *ndev);
#endif
+
void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level);
void qede_set_ethtool_ops(struct net_device *netdev);
void qede_reload(struct qede_dev *edev,
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
new file mode 100644
index 0000000..6161e09
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -0,0 +1,687 @@
+/* QLogic qede NIC Driver
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/udp_tunnel.h>
+#include <linux/bitops.h>
+
+#include <linux/qed/qed_if.h>
+#include "qede.h"
+
+void qede_force_mac(void *dev, u8 *mac, bool forced)
+{
+ struct qede_dev *edev = dev;
+
+ /* MAC hints take effect only if we haven't set one already */
+ if (is_valid_ether_addr(edev->ndev->dev_addr) && !forced)
+ return;
+
+ ether_addr_copy(edev->ndev->dev_addr, mac);
+ ether_addr_copy(edev->primary_mac, mac);
+}
+
+static int qede_set_ucast_rx_mac(struct qede_dev *edev,
+ enum qed_filter_xcast_params_type opcode,
+ unsigned char mac[ETH_ALEN])
+{
+ struct qed_filter_params filter_cmd;
+
+ memset(&filter_cmd, 0, sizeof(filter_cmd));
+ filter_cmd.type = QED_FILTER_TYPE_UCAST;
+ filter_cmd.filter.ucast.type = opcode;
+ filter_cmd.filter.ucast.mac_valid = 1;
+ ether_addr_copy(filter_cmd.filter.ucast.mac, mac);
+
+ return edev->ops->filter_config(edev->cdev, &filter_cmd);
+}
+
+static int qede_set_ucast_rx_vlan(struct qede_dev *edev,
+ enum qed_filter_xcast_params_type opcode,
+ u16 vid)
+{
+ struct qed_filter_params filter_cmd;
+
+ memset(&filter_cmd, 0, sizeof(filter_cmd));
+ filter_cmd.type = QED_FILTER_TYPE_UCAST;
+ filter_cmd.filter.ucast.type = opcode;
+ filter_cmd.filter.ucast.vlan_valid = 1;
+ filter_cmd.filter.ucast.vlan = vid;
+
+ return edev->ops->filter_config(edev->cdev, &filter_cmd);
+}
+
+static void qede_config_accept_any_vlan(struct qede_dev *edev, bool action)
+{
+ struct qed_update_vport_params params;
+ int rc;
+
+ /* Proceed only if action actually needs to be performed */
+ if (edev->accept_any_vlan == action)
+ return;
+
+ memset(¶ms, 0, sizeof(params));
+
+ params.vport_id = 0;
+ params.accept_any_vlan = action;
+ params.update_accept_any_vlan_flg = 1;
+
+ rc = edev->ops->vport_update(edev->cdev, ¶ms);
+ if (rc) {
+ DP_ERR(edev, "Failed to %s accept-any-vlan\n",
+ action ? "enable" : "disable");
+ } else {
+ DP_INFO(edev, "%s accept-any-vlan\n",
+ action ? "enabled" : "disabled");
+ edev->accept_any_vlan = action;
+ }
+}
+
+int qede_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ struct qede_vlan *vlan, *tmp;
+ int rc = 0;
+
+ DP_VERBOSE(edev, NETIF_MSG_IFUP, "Adding vlan 0x%04x\n", vid);
+
+ vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
+ if (!vlan) {
+ DP_INFO(edev, "Failed to allocate struct for vlan\n");
+ return -ENOMEM;
+ }
+ INIT_LIST_HEAD(&vlan->list);
+ vlan->vid = vid;
+ vlan->configured = false;
+
+ /* Verify vlan isn't already configured */
+ list_for_each_entry(tmp, &edev->vlan_list, list) {
+ if (tmp->vid == vlan->vid) {
+ DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+ "vlan already configured\n");
+ kfree(vlan);
+ return -EEXIST;
+ }
+ }
+
+ /* If interface is down, cache this VLAN ID and return */
+ __qede_lock(edev);
+ if (edev->state != QEDE_STATE_OPEN) {
+ DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
+ "Interface is down, VLAN %d will be configured when interface is up\n",
+ vid);
+ if (vid != 0)
+ edev->non_configured_vlans++;
+ list_add(&vlan->list, &edev->vlan_list);
+ goto out;
+ }
+
+ /* Check for the filter limit.
+ * Note - vlan0 has a reserved filter and can be added without
+ * worrying about quota
+ */
+ if ((edev->configured_vlans < edev->dev_info.num_vlan_filters) ||
+ (vlan->vid == 0)) {
+ rc = qede_set_ucast_rx_vlan(edev,
+ QED_FILTER_XCAST_TYPE_ADD,
+ vlan->vid);
+ if (rc) {
+ DP_ERR(edev, "Failed to configure VLAN %d\n",
+ vlan->vid);
+ kfree(vlan);
+ goto out;
+ }
+ vlan->configured = true;
+
+ /* vlan0 filter isn't consuming out of our quota */
+ if (vlan->vid != 0)
+ edev->configured_vlans++;
+ } else {
+ /* Out of quota; Activate accept-any-VLAN mode */
+ if (!edev->non_configured_vlans)
+ qede_config_accept_any_vlan(edev, true);
+
+ edev->non_configured_vlans++;
+ }
+
+ list_add(&vlan->list, &edev->vlan_list);
+
+out:
+ __qede_unlock(edev);
+ return rc;
+}
+
+static void qede_del_vlan_from_list(struct qede_dev *edev,
+ struct qede_vlan *vlan)
+{
+ /* vlan0 filter isn't consuming out of our quota */
+ if (vlan->vid != 0) {
+ if (vlan->configured)
+ edev->configured_vlans--;
+ else
+ edev->non_configured_vlans--;
+ }
+
+ list_del(&vlan->list);
+ kfree(vlan);
+}
+
+int qede_configure_vlan_filters(struct qede_dev *edev)
+{
+ int rc = 0, real_rc = 0, accept_any_vlan = 0;
+ struct qed_dev_eth_info *dev_info;
+ struct qede_vlan *vlan = NULL;
+
+ if (list_empty(&edev->vlan_list))
+ return 0;
+
+ dev_info = &edev->dev_info;
+
+ /* Configure non-configured vlans */
+ list_for_each_entry(vlan, &edev->vlan_list, list) {
+ if (vlan->configured)
+ continue;
+
+ /* We have used all our credits, now enable accept_any_vlan */
+ if ((vlan->vid != 0) &&
+ (edev->configured_vlans == dev_info->num_vlan_filters)) {
+ accept_any_vlan = 1;
+ continue;
+ }
+
+ DP_VERBOSE(edev, NETIF_MSG_IFUP, "Adding vlan %d\n", vlan->vid);
+
+ rc = qede_set_ucast_rx_vlan(edev, QED_FILTER_XCAST_TYPE_ADD,
+ vlan->vid);
+ if (rc) {
+ DP_ERR(edev, "Failed to configure VLAN %u\n",
+ vlan->vid);
+ real_rc = rc;
+ continue;
+ }
+
+ vlan->configured = true;
+ /* vlan0 filter doesn't consume our VLAN filter's quota */
+ if (vlan->vid != 0) {
+ edev->non_configured_vlans--;
+ edev->configured_vlans++;
+ }
+ }
+
+ /* enable accept_any_vlan mode if we have more VLANs than credits,
+ * or remove accept_any_vlan mode if we've actually removed
+ * a non-configured vlan, and all remaining vlans are truly configured.
+ */
+
+ if (accept_any_vlan)
+ qede_config_accept_any_vlan(edev, true);
+ else if (!edev->non_configured_vlans)
+ qede_config_accept_any_vlan(edev, false);
+
+ return real_rc;
+}
+
+int qede_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ struct qede_vlan *vlan = NULL;
+ int rc = 0;
+
+ DP_VERBOSE(edev, NETIF_MSG_IFDOWN, "Removing vlan 0x%04x\n", vid);
+
+ /* Find whether entry exists */
+ __qede_lock(edev);
+ list_for_each_entry(vlan, &edev->vlan_list, list)
+ if (vlan->vid == vid)
+ break;
+
+ if (!vlan || (vlan->vid != vid)) {
+ DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+ "Vlan isn't configured\n");
+ goto out;
+ }
+
+ if (edev->state != QEDE_STATE_OPEN) {
+ /* As interface is already down, we don't have a VPORT
+ * instance to remove vlan filter. So just update vlan list
+ */
+ DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
+ "Interface is down, removing VLAN from list only\n");
+ qede_del_vlan_from_list(edev, vlan);
+ goto out;
+ }
+
+ /* Remove vlan */
+ if (vlan->configured) {
+ rc = qede_set_ucast_rx_vlan(edev, QED_FILTER_XCAST_TYPE_DEL,
+ vid);
+ if (rc) {
+ DP_ERR(edev, "Failed to remove VLAN %d\n", vid);
+ goto out;
+ }
+ }
+
+ qede_del_vlan_from_list(edev, vlan);
+
+ /* We have removed a VLAN - try to see if we can
+ * configure non-configured VLAN from the list.
+ */
+ rc = qede_configure_vlan_filters(edev);
+
+out:
+ __qede_unlock(edev);
+ return rc;
+}
+
+void qede_vlan_mark_nonconfigured(struct qede_dev *edev)
+{
+ struct qede_vlan *vlan = NULL;
+
+ if (list_empty(&edev->vlan_list))
+ return;
+
+ list_for_each_entry(vlan, &edev->vlan_list, list) {
+ if (!vlan->configured)
+ continue;
+
+ vlan->configured = false;
+
+ /* vlan0 filter isn't consuming out of our quota */
+ if (vlan->vid != 0) {
+ edev->non_configured_vlans++;
+ edev->configured_vlans--;
+ }
+
+ DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
+ "marked vlan %d as non-configured\n", vlan->vid);
+ }
+
+ edev->accept_any_vlan = false;
+}
+
+static void qede_set_features_reload(struct qede_dev *edev,
+ struct qede_reload_args *args)
+{
+ edev->ndev->features = args->u.features;
+}
+
+int qede_set_features(struct net_device *dev, netdev_features_t features)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ netdev_features_t changes = features ^ dev->features;
+ bool need_reload = false;
+
+ /* No action needed if hardware GRO is disabled during driver load */
+ if (changes & NETIF_F_GRO) {
+ if (dev->features & NETIF_F_GRO)
+ need_reload = !edev->gro_disable;
+ else
+ need_reload = edev->gro_disable;
+ }
+
+ if (need_reload) {
+ struct qede_reload_args args;
+
+ args.u.features = features;
+ args.func = &qede_set_features_reload;
+
+ /* Make sure that we definitely need to reload.
+ * In case of an eBPF attached program, there will be no FW
+ * aggregations, so no need to actually reload.
+ */
+ __qede_lock(edev);
+ if (edev->xdp_prog)
+ args.func(edev, &args);
+ else
+ qede_reload(edev, &args, true);
+ __qede_unlock(edev);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+void qede_udp_tunnel_add(struct net_device *dev, struct udp_tunnel_info *ti)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ u16 t_port = ntohs(ti->port);
+
+ switch (ti->type) {
+ case UDP_TUNNEL_TYPE_VXLAN:
+ if (edev->vxlan_dst_port)
+ return;
+
+ edev->vxlan_dst_port = t_port;
+
+ DP_VERBOSE(edev, QED_MSG_DEBUG, "Added vxlan port=%d\n",
+ t_port);
+
+ set_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags);
+ break;
+ case UDP_TUNNEL_TYPE_GENEVE:
+ if (edev->geneve_dst_port)
+ return;
+
+ edev->geneve_dst_port = t_port;
+
+ DP_VERBOSE(edev, QED_MSG_DEBUG, "Added geneve port=%d\n",
+ t_port);
+ set_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags);
+ break;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&edev->sp_task, 0);
+}
+
+void qede_udp_tunnel_del(struct net_device *dev, struct udp_tunnel_info *ti)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ u16 t_port = ntohs(ti->port);
+
+ switch (ti->type) {
+ case UDP_TUNNEL_TYPE_VXLAN:
+ if (t_port != edev->vxlan_dst_port)
+ return;
+
+ edev->vxlan_dst_port = 0;
+
+ DP_VERBOSE(edev, QED_MSG_DEBUG, "Deleted vxlan port=%d\n",
+ t_port);
+
+ set_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags);
+ break;
+ case UDP_TUNNEL_TYPE_GENEVE:
+ if (t_port != edev->geneve_dst_port)
+ return;
+
+ edev->geneve_dst_port = 0;
+
+ DP_VERBOSE(edev, QED_MSG_DEBUG, "Deleted geneve port=%d\n",
+ t_port);
+ set_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags);
+ break;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&edev->sp_task, 0);
+}
+
+static void qede_xdp_reload_func(struct qede_dev *edev,
+ struct qede_reload_args *args)
+{
+ struct bpf_prog *old;
+
+ old = xchg(&edev->xdp_prog, args->u.new_prog);
+ if (old)
+ bpf_prog_put(old);
+}
+
+static int qede_xdp_set(struct qede_dev *edev, struct bpf_prog *prog)
+{
+ struct qede_reload_args args;
+
+ if (prog && prog->xdp_adjust_head) {
+ DP_ERR(edev, "Does not support bpf_xdp_adjust_head()\n");
+ return -EOPNOTSUPP;
+ }
+
+ /* If we're called, there was already a bpf reference increment */
+ args.func = &qede_xdp_reload_func;
+ args.u.new_prog = prog;
+ qede_reload(edev, &args, false);
+
+ return 0;
+}
+
+int qede_xdp(struct net_device *dev, struct netdev_xdp *xdp)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+
+ switch (xdp->command) {
+ case XDP_SETUP_PROG:
+ return qede_xdp_set(edev, xdp->prog);
+ case XDP_QUERY_PROG:
+ xdp->prog_attached = !!edev->xdp_prog;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int qede_set_mcast_rx_mac(struct qede_dev *edev,
+ enum qed_filter_xcast_params_type opcode,
+ unsigned char *mac, int num_macs)
+{
+ struct qed_filter_params filter_cmd;
+ int i;
+
+ memset(&filter_cmd, 0, sizeof(filter_cmd));
+ filter_cmd.type = QED_FILTER_TYPE_MCAST;
+ filter_cmd.filter.mcast.type = opcode;
+ filter_cmd.filter.mcast.num = num_macs;
+
+ for (i = 0; i < num_macs; i++, mac += ETH_ALEN)
+ ether_addr_copy(filter_cmd.filter.mcast.mac[i], mac);
+
+ return edev->ops->filter_config(edev->cdev, &filter_cmd);
+}
+
+int qede_set_mac_addr(struct net_device *ndev, void *p)
+{
+ struct qede_dev *edev = netdev_priv(ndev);
+ struct sockaddr *addr = p;
+ int rc;
+
+ ASSERT_RTNL(); /* @@@TBD To be removed */
+
+ DP_INFO(edev, "Set_mac_addr called\n");
+
+ if (!is_valid_ether_addr(addr->sa_data)) {
+ DP_NOTICE(edev, "The MAC address is not valid\n");
+ return -EFAULT;
+ }
+
+ if (!edev->ops->check_mac(edev->cdev, addr->sa_data)) {
+ DP_NOTICE(edev, "qed prevents setting MAC\n");
+ return -EINVAL;
+ }
+
+ ether_addr_copy(ndev->dev_addr, addr->sa_data);
+
+ if (!netif_running(ndev)) {
+ DP_NOTICE(edev, "The device is currently down\n");
+ return 0;
+ }
+
+ /* Remove the previous primary mac */
+ rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL,
+ edev->primary_mac);
+ if (rc)
+ return rc;
+
+ edev->ops->common->update_mac(edev->cdev, addr->sa_data);
+
+ /* Add MAC filter according to the new unicast HW MAC address */
+ ether_addr_copy(edev->primary_mac, ndev->dev_addr);
+ return qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD,
+ edev->primary_mac);
+}
+
+static int
+qede_configure_mcast_filtering(struct net_device *ndev,
+ enum qed_filter_rx_mode_type *accept_flags)
+{
+ struct qede_dev *edev = netdev_priv(ndev);
+ unsigned char *mc_macs, *temp;
+ struct netdev_hw_addr *ha;
+ int rc = 0, mc_count;
+ size_t size;
+
+ size = 64 * ETH_ALEN;
+
+ mc_macs = kzalloc(size, GFP_KERNEL);
+ if (!mc_macs) {
+ DP_NOTICE(edev,
+ "Failed to allocate memory for multicast MACs\n");
+ rc = -ENOMEM;
+ goto exit;
+ }
+
+ temp = mc_macs;
+
+ /* Remove all previously configured MAC filters */
+ rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL,
+ mc_macs, 1);
+ if (rc)
+ goto exit;
+
+ netif_addr_lock_bh(ndev);
+
+ mc_count = netdev_mc_count(ndev);
+ if (mc_count < 64) {
+ netdev_for_each_mc_addr(ha, ndev) {
+ ether_addr_copy(temp, ha->addr);
+ temp += ETH_ALEN;
+ }
+ }
+
+ netif_addr_unlock_bh(ndev);
+
+ /* Check for all multicast @@@TBD resource allocation */
+ if ((ndev->flags & IFF_ALLMULTI) || (mc_count > 64)) {
+ if (*accept_flags == QED_FILTER_RX_MODE_TYPE_REGULAR)
+ *accept_flags = QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC;
+ } else {
+ /* Add all multicast MAC filters */
+ rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD,
+ mc_macs, mc_count);
+ }
+
+exit:
+ kfree(mc_macs);
+ return rc;
+}
+
+void qede_set_rx_mode(struct net_device *ndev)
+{
+ struct qede_dev *edev = netdev_priv(ndev);
+
+ set_bit(QEDE_SP_RX_MODE, &edev->sp_flags);
+ schedule_delayed_work(&edev->sp_task, 0);
+}
+
+/* Must be called with qede_lock held */
+void qede_config_rx_mode(struct net_device *ndev)
+{
+ enum qed_filter_rx_mode_type accept_flags;
+ struct qede_dev *edev = netdev_priv(ndev);
+ struct qed_filter_params rx_mode;
+ unsigned char *uc_macs, *temp;
+ struct netdev_hw_addr *ha;
+ int rc, uc_count;
+ size_t size;
+
+ netif_addr_lock_bh(ndev);
+
+ uc_count = netdev_uc_count(ndev);
+ size = uc_count * ETH_ALEN;
+
+ uc_macs = kzalloc(size, GFP_ATOMIC);
+ if (!uc_macs) {
+ DP_NOTICE(edev, "Failed to allocate memory for unicast MACs\n");
+ netif_addr_unlock_bh(ndev);
+ return;
+ }
+
+ temp = uc_macs;
+ netdev_for_each_uc_addr(ha, ndev) {
+ ether_addr_copy(temp, ha->addr);
+ temp += ETH_ALEN;
+ }
+
+ netif_addr_unlock_bh(ndev);
+
+ /* Configure the struct for the Rx mode */
+ memset(&rx_mode, 0, sizeof(struct qed_filter_params));
+ rx_mode.type = QED_FILTER_TYPE_RX_MODE;
+
+ /* Remove all previous unicast secondary macs and multicast macs
+ * (configrue / leave the primary mac)
+ */
+ rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE,
+ edev->primary_mac);
+ if (rc)
+ goto out;
+
+ /* Check for promiscuous */
+ if ((ndev->flags & IFF_PROMISC) ||
+ (uc_count > edev->dev_info.num_mac_filters - 1)) {
+ accept_flags = QED_FILTER_RX_MODE_TYPE_PROMISC;
+ } else {
+ /* Add MAC filters according to the unicast secondary macs */
+ int i;
+
+ temp = uc_macs;
+ for (i = 0; i < uc_count; i++) {
+ rc = qede_set_ucast_rx_mac(edev,
+ QED_FILTER_XCAST_TYPE_ADD,
+ temp);
+ if (rc)
+ goto out;
+
+ temp += ETH_ALEN;
+ }
+
+ rc = qede_configure_mcast_filtering(ndev, &accept_flags);
+ if (rc)
+ goto out;
+ }
+
+ /* take care of VLAN mode */
+ if (ndev->flags & IFF_PROMISC) {
+ qede_config_accept_any_vlan(edev, true);
+ } else if (!edev->non_configured_vlans) {
+ /* It's possible that accept_any_vlan mode is set due to a
+ * previous setting of IFF_PROMISC. If vlan credits are
+ * sufficient, disable accept_any_vlan.
+ */
+ qede_config_accept_any_vlan(edev, false);
+ }
+
+ rx_mode.filter.accept_flags = accept_flags;
+ edev->ops->filter_config(edev->cdev, &rx_mode);
+out:
+ kfree(uc_macs);
+}
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 1393bf4..334e414 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -210,18 +210,6 @@ static int qede_sriov_configure(struct pci_dev *pdev, int num_vfs_param)
#endif
};
-static void qede_force_mac(void *dev, u8 *mac, bool forced)
-{
- struct qede_dev *edev = dev;
-
- /* MAC hints take effect only if we haven't set one already */
- if (is_valid_ether_addr(edev->ndev->dev_addr) && !forced)
- return;
-
- ether_addr_copy(edev->ndev->dev_addr, mac);
- ether_addr_copy(edev->primary_mac, mac);
-}
-
static struct qed_eth_cb_ops qede_ll_ops = {
{
.link_update = qede_link_update,
@@ -319,39 +307,6 @@ static void __exit qede_cleanup(void)
static int qede_open(struct net_device *ndev);
static int qede_close(struct net_device *ndev);
-static int qede_set_mac_addr(struct net_device *ndev, void *p);
-static void qede_set_rx_mode(struct net_device *ndev);
-static void qede_config_rx_mode(struct net_device *ndev);
-
-static int qede_set_ucast_rx_mac(struct qede_dev *edev,
- enum qed_filter_xcast_params_type opcode,
- unsigned char mac[ETH_ALEN])
-{
- struct qed_filter_params filter_cmd;
-
- memset(&filter_cmd, 0, sizeof(filter_cmd));
- filter_cmd.type = QED_FILTER_TYPE_UCAST;
- filter_cmd.filter.ucast.type = opcode;
- filter_cmd.filter.ucast.mac_valid = 1;
- ether_addr_copy(filter_cmd.filter.ucast.mac, mac);
-
- return edev->ops->filter_config(edev->cdev, &filter_cmd);
-}
-
-static int qede_set_ucast_rx_vlan(struct qede_dev *edev,
- enum qed_filter_xcast_params_type opcode,
- u16 vid)
-{
- struct qed_filter_params filter_cmd;
-
- memset(&filter_cmd, 0, sizeof(filter_cmd));
- filter_cmd.type = QED_FILTER_TYPE_UCAST;
- filter_cmd.filter.ucast.type = opcode;
- filter_cmd.filter.ucast.vlan_valid = 1;
- filter_cmd.filter.ucast.vlan = vid;
-
- return edev->ops->filter_config(edev->cdev, &filter_cmd);
-}
void qede_fill_by_demand_stats(struct qede_dev *edev)
{
@@ -519,409 +474,6 @@ static int qede_set_vf_link_state(struct net_device *dev, int vfidx,
}
#endif
-static void qede_config_accept_any_vlan(struct qede_dev *edev, bool action)
-{
- struct qed_update_vport_params params;
- int rc;
-
- /* Proceed only if action actually needs to be performed */
- if (edev->accept_any_vlan == action)
- return;
-
- memset(¶ms, 0, sizeof(params));
-
- params.vport_id = 0;
- params.accept_any_vlan = action;
- params.update_accept_any_vlan_flg = 1;
-
- rc = edev->ops->vport_update(edev->cdev, ¶ms);
- if (rc) {
- DP_ERR(edev, "Failed to %s accept-any-vlan\n",
- action ? "enable" : "disable");
- } else {
- DP_INFO(edev, "%s accept-any-vlan\n",
- action ? "enabled" : "disabled");
- edev->accept_any_vlan = action;
- }
-}
-
-static int qede_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
-{
- struct qede_dev *edev = netdev_priv(dev);
- struct qede_vlan *vlan, *tmp;
- int rc = 0;
-
- DP_VERBOSE(edev, NETIF_MSG_IFUP, "Adding vlan 0x%04x\n", vid);
-
- vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
- if (!vlan) {
- DP_INFO(edev, "Failed to allocate struct for vlan\n");
- return -ENOMEM;
- }
- INIT_LIST_HEAD(&vlan->list);
- vlan->vid = vid;
- vlan->configured = false;
-
- /* Verify vlan isn't already configured */
- list_for_each_entry(tmp, &edev->vlan_list, list) {
- if (tmp->vid == vlan->vid) {
- DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
- "vlan already configured\n");
- kfree(vlan);
- return -EEXIST;
- }
- }
-
- /* If interface is down, cache this VLAN ID and return */
- __qede_lock(edev);
- if (edev->state != QEDE_STATE_OPEN) {
- DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
- "Interface is down, VLAN %d will be configured when interface is up\n",
- vid);
- if (vid != 0)
- edev->non_configured_vlans++;
- list_add(&vlan->list, &edev->vlan_list);
- goto out;
- }
-
- /* Check for the filter limit.
- * Note - vlan0 has a reserved filter and can be added without
- * worrying about quota
- */
- if ((edev->configured_vlans < edev->dev_info.num_vlan_filters) ||
- (vlan->vid == 0)) {
- rc = qede_set_ucast_rx_vlan(edev,
- QED_FILTER_XCAST_TYPE_ADD,
- vlan->vid);
- if (rc) {
- DP_ERR(edev, "Failed to configure VLAN %d\n",
- vlan->vid);
- kfree(vlan);
- goto out;
- }
- vlan->configured = true;
-
- /* vlan0 filter isn't consuming out of our quota */
- if (vlan->vid != 0)
- edev->configured_vlans++;
- } else {
- /* Out of quota; Activate accept-any-VLAN mode */
- if (!edev->non_configured_vlans)
- qede_config_accept_any_vlan(edev, true);
-
- edev->non_configured_vlans++;
- }
-
- list_add(&vlan->list, &edev->vlan_list);
-
-out:
- __qede_unlock(edev);
- return rc;
-}
-
-static void qede_del_vlan_from_list(struct qede_dev *edev,
- struct qede_vlan *vlan)
-{
- /* vlan0 filter isn't consuming out of our quota */
- if (vlan->vid != 0) {
- if (vlan->configured)
- edev->configured_vlans--;
- else
- edev->non_configured_vlans--;
- }
-
- list_del(&vlan->list);
- kfree(vlan);
-}
-
-static int qede_configure_vlan_filters(struct qede_dev *edev)
-{
- int rc = 0, real_rc = 0, accept_any_vlan = 0;
- struct qed_dev_eth_info *dev_info;
- struct qede_vlan *vlan = NULL;
-
- if (list_empty(&edev->vlan_list))
- return 0;
-
- dev_info = &edev->dev_info;
-
- /* Configure non-configured vlans */
- list_for_each_entry(vlan, &edev->vlan_list, list) {
- if (vlan->configured)
- continue;
-
- /* We have used all our credits, now enable accept_any_vlan */
- if ((vlan->vid != 0) &&
- (edev->configured_vlans == dev_info->num_vlan_filters)) {
- accept_any_vlan = 1;
- continue;
- }
-
- DP_VERBOSE(edev, NETIF_MSG_IFUP, "Adding vlan %d\n", vlan->vid);
-
- rc = qede_set_ucast_rx_vlan(edev, QED_FILTER_XCAST_TYPE_ADD,
- vlan->vid);
- if (rc) {
- DP_ERR(edev, "Failed to configure VLAN %u\n",
- vlan->vid);
- real_rc = rc;
- continue;
- }
-
- vlan->configured = true;
- /* vlan0 filter doesn't consume our VLAN filter's quota */
- if (vlan->vid != 0) {
- edev->non_configured_vlans--;
- edev->configured_vlans++;
- }
- }
-
- /* enable accept_any_vlan mode if we have more VLANs than credits,
- * or remove accept_any_vlan mode if we've actually removed
- * a non-configured vlan, and all remaining vlans are truly configured.
- */
-
- if (accept_any_vlan)
- qede_config_accept_any_vlan(edev, true);
- else if (!edev->non_configured_vlans)
- qede_config_accept_any_vlan(edev, false);
-
- return real_rc;
-}
-
-static int qede_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
-{
- struct qede_dev *edev = netdev_priv(dev);
- struct qede_vlan *vlan = NULL;
- int rc = 0;
-
- DP_VERBOSE(edev, NETIF_MSG_IFDOWN, "Removing vlan 0x%04x\n", vid);
-
- /* Find whether entry exists */
- __qede_lock(edev);
- list_for_each_entry(vlan, &edev->vlan_list, list)
- if (vlan->vid == vid)
- break;
-
- if (!vlan || (vlan->vid != vid)) {
- DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
- "Vlan isn't configured\n");
- goto out;
- }
-
- if (edev->state != QEDE_STATE_OPEN) {
- /* As interface is already down, we don't have a VPORT
- * instance to remove vlan filter. So just update vlan list
- */
- DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
- "Interface is down, removing VLAN from list only\n");
- qede_del_vlan_from_list(edev, vlan);
- goto out;
- }
-
- /* Remove vlan */
- if (vlan->configured) {
- rc = qede_set_ucast_rx_vlan(edev, QED_FILTER_XCAST_TYPE_DEL,
- vid);
- if (rc) {
- DP_ERR(edev, "Failed to remove VLAN %d\n", vid);
- goto out;
- }
- }
-
- qede_del_vlan_from_list(edev, vlan);
-
- /* We have removed a VLAN - try to see if we can
- * configure non-configured VLAN from the list.
- */
- rc = qede_configure_vlan_filters(edev);
-
-out:
- __qede_unlock(edev);
- return rc;
-}
-
-static void qede_vlan_mark_nonconfigured(struct qede_dev *edev)
-{
- struct qede_vlan *vlan = NULL;
-
- if (list_empty(&edev->vlan_list))
- return;
-
- list_for_each_entry(vlan, &edev->vlan_list, list) {
- if (!vlan->configured)
- continue;
-
- vlan->configured = false;
-
- /* vlan0 filter isn't consuming out of our quota */
- if (vlan->vid != 0) {
- edev->non_configured_vlans++;
- edev->configured_vlans--;
- }
-
- DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
- "marked vlan %d as non-configured\n", vlan->vid);
- }
-
- edev->accept_any_vlan = false;
-}
-
-static void qede_set_features_reload(struct qede_dev *edev,
- struct qede_reload_args *args)
-{
- edev->ndev->features = args->u.features;
-}
-
-int qede_set_features(struct net_device *dev, netdev_features_t features)
-{
- struct qede_dev *edev = netdev_priv(dev);
- netdev_features_t changes = features ^ dev->features;
- bool need_reload = false;
-
- /* No action needed if hardware GRO is disabled during driver load */
- if (changes & NETIF_F_GRO) {
- if (dev->features & NETIF_F_GRO)
- need_reload = !edev->gro_disable;
- else
- need_reload = edev->gro_disable;
- }
-
- if (need_reload) {
- struct qede_reload_args args;
-
- args.u.features = features;
- args.func = &qede_set_features_reload;
-
- /* Make sure that we definitely need to reload.
- * In case of an eBPF attached program, there will be no FW
- * aggregations, so no need to actually reload.
- */
- __qede_lock(edev);
- if (edev->xdp_prog)
- args.func(edev, &args);
- else
- qede_reload(edev, &args, true);
- __qede_unlock(edev);
-
- return 1;
- }
-
- return 0;
-}
-
-static void qede_udp_tunnel_add(struct net_device *dev,
- struct udp_tunnel_info *ti)
-{
- struct qede_dev *edev = netdev_priv(dev);
- u16 t_port = ntohs(ti->port);
-
- switch (ti->type) {
- case UDP_TUNNEL_TYPE_VXLAN:
- if (edev->vxlan_dst_port)
- return;
-
- edev->vxlan_dst_port = t_port;
-
- DP_VERBOSE(edev, QED_MSG_DEBUG, "Added vxlan port=%d\n",
- t_port);
-
- set_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags);
- break;
- case UDP_TUNNEL_TYPE_GENEVE:
- if (edev->geneve_dst_port)
- return;
-
- edev->geneve_dst_port = t_port;
-
- DP_VERBOSE(edev, QED_MSG_DEBUG, "Added geneve port=%d\n",
- t_port);
- set_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags);
- break;
- default:
- return;
- }
-
- schedule_delayed_work(&edev->sp_task, 0);
-}
-
-static void qede_udp_tunnel_del(struct net_device *dev,
- struct udp_tunnel_info *ti)
-{
- struct qede_dev *edev = netdev_priv(dev);
- u16 t_port = ntohs(ti->port);
-
- switch (ti->type) {
- case UDP_TUNNEL_TYPE_VXLAN:
- if (t_port != edev->vxlan_dst_port)
- return;
-
- edev->vxlan_dst_port = 0;
-
- DP_VERBOSE(edev, QED_MSG_DEBUG, "Deleted vxlan port=%d\n",
- t_port);
-
- set_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags);
- break;
- case UDP_TUNNEL_TYPE_GENEVE:
- if (t_port != edev->geneve_dst_port)
- return;
-
- edev->geneve_dst_port = 0;
-
- DP_VERBOSE(edev, QED_MSG_DEBUG, "Deleted geneve port=%d\n",
- t_port);
- set_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags);
- break;
- default:
- return;
- }
-
- schedule_delayed_work(&edev->sp_task, 0);
-}
-
-static void qede_xdp_reload_func(struct qede_dev *edev,
- struct qede_reload_args *args)
-{
- struct bpf_prog *old;
-
- old = xchg(&edev->xdp_prog, args->u.new_prog);
- if (old)
- bpf_prog_put(old);
-}
-
-static int qede_xdp_set(struct qede_dev *edev, struct bpf_prog *prog)
-{
- struct qede_reload_args args;
-
- if (prog && prog->xdp_adjust_head) {
- DP_ERR(edev, "Does not support bpf_xdp_adjust_head()\n");
- return -EOPNOTSUPP;
- }
-
- /* If we're called, there was already a bpf reference increment */
- args.func = &qede_xdp_reload_func;
- args.u.new_prog = prog;
- qede_reload(edev, &args, false);
-
- return 0;
-}
-
-static int qede_xdp(struct net_device *dev, struct netdev_xdp *xdp)
-{
- struct qede_dev *edev = netdev_priv(dev);
-
- switch (xdp->command) {
- case XDP_SETUP_PROG:
- return qede_xdp_set(edev, xdp->prog);
- case XDP_QUERY_PROG:
- xdp->prog_attached = !!edev->xdp_prog;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
static const struct net_device_ops qede_netdev_ops = {
.ndo_open = qede_open,
.ndo_stop = qede_close,
@@ -2237,23 +1789,6 @@ static int qede_start_queues(struct qede_dev *edev, bool clear_stats)
return 0;
}
-static int qede_set_mcast_rx_mac(struct qede_dev *edev,
- enum qed_filter_xcast_params_type opcode,
- unsigned char *mac, int num_macs)
-{
- struct qed_filter_params filter_cmd;
- int i;
-
- memset(&filter_cmd, 0, sizeof(filter_cmd));
- filter_cmd.type = QED_FILTER_TYPE_MCAST;
- filter_cmd.filter.mcast.type = opcode;
- filter_cmd.filter.mcast.num = num_macs;
-
- for (i = 0; i < num_macs; i++, mac += ETH_ALEN)
- ether_addr_copy(filter_cmd.filter.mcast.mac[i], mac);
-
- return edev->ops->filter_config(edev->cdev, &filter_cmd);
-}
enum qede_unload_mode {
QEDE_UNLOAD_NORMAL,
@@ -2484,192 +2019,3 @@ static void qede_link_update(void *dev, struct qed_link_output *link)
}
}
}
-
-static int qede_set_mac_addr(struct net_device *ndev, void *p)
-{
- struct qede_dev *edev = netdev_priv(ndev);
- struct sockaddr *addr = p;
- int rc;
-
- ASSERT_RTNL(); /* @@@TBD To be removed */
-
- DP_INFO(edev, "Set_mac_addr called\n");
-
- if (!is_valid_ether_addr(addr->sa_data)) {
- DP_NOTICE(edev, "The MAC address is not valid\n");
- return -EFAULT;
- }
-
- if (!edev->ops->check_mac(edev->cdev, addr->sa_data)) {
- DP_NOTICE(edev, "qed prevents setting MAC\n");
- return -EINVAL;
- }
-
- ether_addr_copy(ndev->dev_addr, addr->sa_data);
-
- if (!netif_running(ndev)) {
- DP_NOTICE(edev, "The device is currently down\n");
- return 0;
- }
-
- /* Remove the previous primary mac */
- rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL,
- edev->primary_mac);
- if (rc)
- return rc;
-
- edev->ops->common->update_mac(edev->cdev, addr->sa_data);
-
- /* Add MAC filter according to the new unicast HW MAC address */
- ether_addr_copy(edev->primary_mac, ndev->dev_addr);
- return qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD,
- edev->primary_mac);
-}
-
-static int
-qede_configure_mcast_filtering(struct net_device *ndev,
- enum qed_filter_rx_mode_type *accept_flags)
-{
- struct qede_dev *edev = netdev_priv(ndev);
- unsigned char *mc_macs, *temp;
- struct netdev_hw_addr *ha;
- int rc = 0, mc_count;
- size_t size;
-
- size = 64 * ETH_ALEN;
-
- mc_macs = kzalloc(size, GFP_KERNEL);
- if (!mc_macs) {
- DP_NOTICE(edev,
- "Failed to allocate memory for multicast MACs\n");
- rc = -ENOMEM;
- goto exit;
- }
-
- temp = mc_macs;
-
- /* Remove all previously configured MAC filters */
- rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL,
- mc_macs, 1);
- if (rc)
- goto exit;
-
- netif_addr_lock_bh(ndev);
-
- mc_count = netdev_mc_count(ndev);
- if (mc_count < 64) {
- netdev_for_each_mc_addr(ha, ndev) {
- ether_addr_copy(temp, ha->addr);
- temp += ETH_ALEN;
- }
- }
-
- netif_addr_unlock_bh(ndev);
-
- /* Check for all multicast @@@TBD resource allocation */
- if ((ndev->flags & IFF_ALLMULTI) ||
- (mc_count > 64)) {
- if (*accept_flags == QED_FILTER_RX_MODE_TYPE_REGULAR)
- *accept_flags = QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC;
- } else {
- /* Add all multicast MAC filters */
- rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD,
- mc_macs, mc_count);
- }
-
-exit:
- kfree(mc_macs);
- return rc;
-}
-
-static void qede_set_rx_mode(struct net_device *ndev)
-{
- struct qede_dev *edev = netdev_priv(ndev);
-
- set_bit(QEDE_SP_RX_MODE, &edev->sp_flags);
- schedule_delayed_work(&edev->sp_task, 0);
-}
-
-/* Must be called with qede_lock held */
-static void qede_config_rx_mode(struct net_device *ndev)
-{
- enum qed_filter_rx_mode_type accept_flags = QED_FILTER_TYPE_UCAST;
- struct qede_dev *edev = netdev_priv(ndev);
- struct qed_filter_params rx_mode;
- unsigned char *uc_macs, *temp;
- struct netdev_hw_addr *ha;
- int rc, uc_count;
- size_t size;
-
- netif_addr_lock_bh(ndev);
-
- uc_count = netdev_uc_count(ndev);
- size = uc_count * ETH_ALEN;
-
- uc_macs = kzalloc(size, GFP_ATOMIC);
- if (!uc_macs) {
- DP_NOTICE(edev, "Failed to allocate memory for unicast MACs\n");
- netif_addr_unlock_bh(ndev);
- return;
- }
-
- temp = uc_macs;
- netdev_for_each_uc_addr(ha, ndev) {
- ether_addr_copy(temp, ha->addr);
- temp += ETH_ALEN;
- }
-
- netif_addr_unlock_bh(ndev);
-
- /* Configure the struct for the Rx mode */
- memset(&rx_mode, 0, sizeof(struct qed_filter_params));
- rx_mode.type = QED_FILTER_TYPE_RX_MODE;
-
- /* Remove all previous unicast secondary macs and multicast macs
- * (configrue / leave the primary mac)
- */
- rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE,
- edev->primary_mac);
- if (rc)
- goto out;
-
- /* Check for promiscuous */
- if ((ndev->flags & IFF_PROMISC) ||
- (uc_count > edev->dev_info.num_mac_filters - 1)) {
- accept_flags = QED_FILTER_RX_MODE_TYPE_PROMISC;
- } else {
- /* Add MAC filters according to the unicast secondary macs */
- int i;
-
- temp = uc_macs;
- for (i = 0; i < uc_count; i++) {
- rc = qede_set_ucast_rx_mac(edev,
- QED_FILTER_XCAST_TYPE_ADD,
- temp);
- if (rc)
- goto out;
-
- temp += ETH_ALEN;
- }
-
- rc = qede_configure_mcast_filtering(ndev, &accept_flags);
- if (rc)
- goto out;
- }
-
- /* take care of VLAN mode */
- if (ndev->flags & IFF_PROMISC) {
- qede_config_accept_any_vlan(edev, true);
- } else if (!edev->non_configured_vlans) {
- /* It's possible that accept_any_vlan mode is set due to a
- * previous setting of IFF_PROMISC. If vlan credits are
- * sufficient, disable accept_any_vlan.
- */
- qede_config_accept_any_vlan(edev, false);
- }
-
- rx_mode.filter.accept_flags = accept_flags;
- edev->ops->filter_config(edev->cdev, &rx_mode);
-out:
- kfree(uc_macs);
-}
--
1.9.3
^ permalink raw reply related
* [PATCH net-next 02/12] qede: Break datapath logic into its own file
From: Yuval Mintz @ 2017-01-01 11:57 UTC (permalink / raw)
To: davem, netdev; +Cc: Yuval Mintz
In-Reply-To: <1483271831-25890-1-git-send-email-Yuval.Mintz@cavium.com>
This adds a new file qede_fp.c and relocates the datapath-related
logic into it [from qede_main.c].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
---
drivers/net/ethernet/qlogic/qede/Makefile | 2 +-
drivers/net/ethernet/qlogic/qede/qede.h | 11 +
drivers/net/ethernet/qlogic/qede/qede_fp.c | 1674 ++++++++++++++++++++++++++
drivers/net/ethernet/qlogic/qede/qede_main.c | 1636 -------------------------
4 files changed, 1686 insertions(+), 1637 deletions(-)
create mode 100644 drivers/net/ethernet/qlogic/qede/qede_fp.c
diff --git a/drivers/net/ethernet/qlogic/qede/Makefile b/drivers/net/ethernet/qlogic/qede/Makefile
index 048a230..c54922b 100644
--- a/drivers/net/ethernet/qlogic/qede/Makefile
+++ b/drivers/net/ethernet/qlogic/qede/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_QEDE) := qede.o
-qede-y := qede_main.o qede_ethtool.o
+qede-y := qede_main.o qede_fp.o qede_ethtool.o
qede-$(CONFIG_DCB) += qede_dcbnl.o
qede-$(CONFIG_QED_RDMA) += qede_roce.o
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index b2c6cc9..b4e4196 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -408,6 +408,17 @@ struct qede_reload_args {
} u;
};
+/* Datapath functions definition */
+netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+netdev_features_t qede_features_check(struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features);
+void qede_tx_log_print(struct qede_dev *edev, struct qede_fastpath *fp);
+int qede_alloc_rx_buffer(struct qede_rx_queue *rxq);
+int qede_free_tx_pkt(struct qede_dev *edev,
+ struct qede_tx_queue *txq, int *len);
+int qede_poll(struct napi_struct *napi, int budget);
+irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie);
#ifdef CONFIG_DCB
void qede_set_dcbnl_ops(struct net_device *ndev);
#endif
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
new file mode 100644
index 0000000..1614eed
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -0,0 +1,1674 @@
+/* QLogic qede NIC Driver
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <net/udp_tunnel.h>
+#include <linux/ip.h>
+#include <net/ipv6.h>
+#include <net/tcp.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <net/ip6_checksum.h>
+
+#include <linux/qed/qed_if.h>
+#include "qede.h"
+/*********************************
+ * Content also used by slowpath *
+ *********************************/
+
+int qede_alloc_rx_buffer(struct qede_rx_queue *rxq)
+{
+ struct sw_rx_data *sw_rx_data;
+ struct eth_rx_bd *rx_bd;
+ dma_addr_t mapping;
+ struct page *data;
+
+ data = alloc_pages(GFP_ATOMIC, 0);
+ if (unlikely(!data))
+ return -ENOMEM;
+
+ /* Map the entire page as it would be used
+ * for multiple RX buffer segment size mapping.
+ */
+ mapping = dma_map_page(rxq->dev, data, 0,
+ PAGE_SIZE, rxq->data_direction);
+ if (unlikely(dma_mapping_error(rxq->dev, mapping))) {
+ __free_page(data);
+ return -ENOMEM;
+ }
+
+ sw_rx_data = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+ sw_rx_data->page_offset = 0;
+ sw_rx_data->data = data;
+ sw_rx_data->mapping = mapping;
+
+ /* Advance PROD and get BD pointer */
+ rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring);
+ WARN_ON(!rx_bd);
+ rx_bd->addr.hi = cpu_to_le32(upper_32_bits(mapping));
+ rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping));
+
+ rxq->sw_rx_prod++;
+
+ return 0;
+}
+
+/* Unmap the data and free skb */
+int qede_free_tx_pkt(struct qede_dev *edev, struct qede_tx_queue *txq, int *len)
+{
+ u16 idx = txq->sw_tx_cons & NUM_TX_BDS_MAX;
+ struct sk_buff *skb = txq->sw_tx_ring.skbs[idx].skb;
+ struct eth_tx_1st_bd *first_bd;
+ struct eth_tx_bd *tx_data_bd;
+ int bds_consumed = 0;
+ int nbds;
+ bool data_split = txq->sw_tx_ring.skbs[idx].flags & QEDE_TSO_SPLIT_BD;
+ int i, split_bd_len = 0;
+
+ if (unlikely(!skb)) {
+ DP_ERR(edev,
+ "skb is null for txq idx=%d txq->sw_tx_cons=%d txq->sw_tx_prod=%d\n",
+ idx, txq->sw_tx_cons, txq->sw_tx_prod);
+ return -1;
+ }
+
+ *len = skb->len;
+
+ first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
+
+ bds_consumed++;
+
+ nbds = first_bd->data.nbds;
+
+ if (data_split) {
+ struct eth_tx_bd *split = (struct eth_tx_bd *)
+ qed_chain_consume(&txq->tx_pbl);
+ split_bd_len = BD_UNMAP_LEN(split);
+ bds_consumed++;
+ }
+ dma_unmap_single(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
+ BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
+
+ /* Unmap the data of the skb frags */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, bds_consumed++) {
+ tx_data_bd = (struct eth_tx_bd *)
+ qed_chain_consume(&txq->tx_pbl);
+ dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
+ BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+ }
+
+ while (bds_consumed++ < nbds)
+ qed_chain_consume(&txq->tx_pbl);
+
+ /* Free skb */
+ dev_kfree_skb_any(skb);
+ txq->sw_tx_ring.skbs[idx].skb = NULL;
+ txq->sw_tx_ring.skbs[idx].flags = 0;
+
+ return 0;
+}
+
+/* Unmap the data and free skb when mapping failed during start_xmit */
+static void qede_free_failed_tx_pkt(struct qede_tx_queue *txq,
+ struct eth_tx_1st_bd *first_bd,
+ int nbd, bool data_split)
+{
+ u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+ struct sk_buff *skb = txq->sw_tx_ring.skbs[idx].skb;
+ struct eth_tx_bd *tx_data_bd;
+ int i, split_bd_len = 0;
+
+ /* Return prod to its position before this skb was handled */
+ qed_chain_set_prod(&txq->tx_pbl,
+ le16_to_cpu(txq->tx_db.data.bd_prod), first_bd);
+
+ first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl);
+
+ if (data_split) {
+ struct eth_tx_bd *split = (struct eth_tx_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ split_bd_len = BD_UNMAP_LEN(split);
+ nbd--;
+ }
+
+ dma_unmap_single(txq->dev, BD_UNMAP_ADDR(first_bd),
+ BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
+
+ /* Unmap the data of the skb frags */
+ for (i = 0; i < nbd; i++) {
+ tx_data_bd = (struct eth_tx_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ if (tx_data_bd->nbytes)
+ dma_unmap_page(txq->dev,
+ BD_UNMAP_ADDR(tx_data_bd),
+ BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+ }
+
+ /* Return again prod to its position before this skb was handled */
+ qed_chain_set_prod(&txq->tx_pbl,
+ le16_to_cpu(txq->tx_db.data.bd_prod), first_bd);
+
+ /* Free skb */
+ dev_kfree_skb_any(skb);
+ txq->sw_tx_ring.skbs[idx].skb = NULL;
+ txq->sw_tx_ring.skbs[idx].flags = 0;
+}
+
+static u32 qede_xmit_type(struct sk_buff *skb, int *ipv6_ext)
+{
+ u32 rc = XMIT_L4_CSUM;
+ __be16 l3_proto;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return XMIT_PLAIN;
+
+ l3_proto = vlan_get_protocol(skb);
+ if (l3_proto == htons(ETH_P_IPV6) &&
+ (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
+ *ipv6_ext = 1;
+
+ if (skb->encapsulation) {
+ rc |= XMIT_ENC;
+ if (skb_is_gso(skb)) {
+ unsigned short gso_type = skb_shinfo(skb)->gso_type;
+
+ if ((gso_type & SKB_GSO_UDP_TUNNEL_CSUM) ||
+ (gso_type & SKB_GSO_GRE_CSUM))
+ rc |= XMIT_ENC_GSO_L4_CSUM;
+
+ rc |= XMIT_LSO;
+ return rc;
+ }
+ }
+
+ if (skb_is_gso(skb))
+ rc |= XMIT_LSO;
+
+ return rc;
+}
+
+static void qede_set_params_for_ipv6_ext(struct sk_buff *skb,
+ struct eth_tx_2nd_bd *second_bd,
+ struct eth_tx_3rd_bd *third_bd)
+{
+ u8 l4_proto;
+ u16 bd2_bits1 = 0, bd2_bits2 = 0;
+
+ bd2_bits1 |= (1 << ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT);
+
+ bd2_bits2 |= ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) &
+ ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK)
+ << ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT;
+
+ bd2_bits1 |= (ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH <<
+ ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT);
+
+ if (vlan_get_protocol(skb) == htons(ETH_P_IPV6))
+ l4_proto = ipv6_hdr(skb)->nexthdr;
+ else
+ l4_proto = ip_hdr(skb)->protocol;
+
+ if (l4_proto == IPPROTO_UDP)
+ bd2_bits1 |= 1 << ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT;
+
+ if (third_bd)
+ third_bd->data.bitfields |=
+ cpu_to_le16(((tcp_hdrlen(skb) / 4) &
+ ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK) <<
+ ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT);
+
+ second_bd->data.bitfields1 = cpu_to_le16(bd2_bits1);
+ second_bd->data.bitfields2 = cpu_to_le16(bd2_bits2);
+}
+
+static int map_frag_to_bd(struct qede_tx_queue *txq,
+ skb_frag_t *frag, struct eth_tx_bd *bd)
+{
+ dma_addr_t mapping;
+
+ /* Map skb non-linear frag data for DMA */
+ mapping = skb_frag_dma_map(txq->dev, frag, 0,
+ skb_frag_size(frag), DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(txq->dev, mapping)))
+ return -ENOMEM;
+
+ /* Setup the data pointer of the frag data */
+ BD_SET_UNMAP_ADDR_LEN(bd, mapping, skb_frag_size(frag));
+
+ return 0;
+}
+
+static u16 qede_get_skb_hlen(struct sk_buff *skb, bool is_encap_pkt)
+{
+ if (is_encap_pkt)
+ return (skb_inner_transport_header(skb) +
+ inner_tcp_hdrlen(skb) - skb->data);
+ else
+ return (skb_transport_header(skb) +
+ tcp_hdrlen(skb) - skb->data);
+}
+
+/* +2 for 1st BD for headers and 2nd BD for headlen (if required) */
+#if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET)
+static bool qede_pkt_req_lin(struct sk_buff *skb, u8 xmit_type)
+{
+ int allowed_frags = ETH_TX_MAX_BDS_PER_NON_LSO_PACKET - 1;
+
+ if (xmit_type & XMIT_LSO) {
+ int hlen;
+
+ hlen = qede_get_skb_hlen(skb, xmit_type & XMIT_ENC);
+
+ /* linear payload would require its own BD */
+ if (skb_headlen(skb) > hlen)
+ allowed_frags--;
+ }
+
+ return (skb_shinfo(skb)->nr_frags > allowed_frags);
+}
+#endif
+
+static inline void qede_update_tx_producer(struct qede_tx_queue *txq)
+{
+ /* wmb makes sure that the BDs data is updated before updating the
+ * producer, otherwise FW may read old data from the BDs.
+ */
+ wmb();
+ barrier();
+ writel(txq->tx_db.raw, txq->doorbell_addr);
+
+ /* mmiowb is needed to synchronize doorbell writes from more than one
+ * processor. It guarantees that the write arrives to the device before
+ * the queue lock is released and another start_xmit is called (possibly
+ * on another CPU). Without this barrier, the next doorbell can bypass
+ * this doorbell. This is applicable to IA64/Altix systems.
+ */
+ mmiowb();
+}
+
+static int qede_xdp_xmit(struct qede_dev *edev, struct qede_fastpath *fp,
+ struct sw_rx_data *metadata, u16 padding, u16 length)
+{
+ struct qede_tx_queue *txq = fp->xdp_tx;
+ u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+ struct eth_tx_1st_bd *first_bd;
+
+ if (!qed_chain_get_elem_left(&txq->tx_pbl)) {
+ txq->stopped_cnt++;
+ return -ENOMEM;
+ }
+
+ first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl);
+
+ memset(first_bd, 0, sizeof(*first_bd));
+ first_bd->data.bd_flags.bitfields =
+ BIT(ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT);
+ first_bd->data.bitfields |=
+ (length & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) <<
+ ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT;
+ first_bd->data.nbds = 1;
+
+ /* We can safely ignore the offset, as it's 0 for XDP */
+ BD_SET_UNMAP_ADDR_LEN(first_bd, metadata->mapping + padding, length);
+
+ /* Synchronize the buffer back to device, as program [probably]
+ * has changed it.
+ */
+ dma_sync_single_for_device(&edev->pdev->dev,
+ metadata->mapping + padding,
+ length, PCI_DMA_TODEVICE);
+
+ txq->sw_tx_ring.pages[idx] = metadata->data;
+ txq->sw_tx_prod++;
+
+ /* Mark the fastpath for future XDP doorbell */
+ fp->xdp_xmit = 1;
+
+ return 0;
+}
+
+int qede_txq_has_work(struct qede_tx_queue *txq)
+{
+ u16 hw_bd_cons;
+
+ /* Tell compiler that consumer and producer can change */
+ barrier();
+ hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+ if (qed_chain_get_cons_idx(&txq->tx_pbl) == hw_bd_cons + 1)
+ return 0;
+
+ return hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl);
+}
+
+static void qede_xdp_tx_int(struct qede_dev *edev, struct qede_tx_queue *txq)
+{
+ struct eth_tx_1st_bd *bd;
+ u16 hw_bd_cons;
+
+ hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+ barrier();
+
+ while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) {
+ bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
+
+ dma_unmap_single(&edev->pdev->dev, BD_UNMAP_ADDR(bd),
+ PAGE_SIZE, DMA_BIDIRECTIONAL);
+ __free_page(txq->sw_tx_ring.pages[txq->sw_tx_cons &
+ NUM_TX_BDS_MAX]);
+
+ txq->sw_tx_cons++;
+ txq->xmit_pkts++;
+ }
+}
+
+static int qede_tx_int(struct qede_dev *edev, struct qede_tx_queue *txq)
+{
+ struct netdev_queue *netdev_txq;
+ u16 hw_bd_cons;
+ unsigned int pkts_compl = 0, bytes_compl = 0;
+ int rc;
+
+ netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index);
+
+ hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+ barrier();
+
+ while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) {
+ int len = 0;
+
+ rc = qede_free_tx_pkt(edev, txq, &len);
+ if (rc) {
+ DP_NOTICE(edev, "hw_bd_cons = %d, chain_cons=%d\n",
+ hw_bd_cons,
+ qed_chain_get_cons_idx(&txq->tx_pbl));
+ break;
+ }
+
+ bytes_compl += len;
+ pkts_compl++;
+ txq->sw_tx_cons++;
+ txq->xmit_pkts++;
+ }
+
+ netdev_tx_completed_queue(netdev_txq, pkts_compl, bytes_compl);
+
+ /* Need to make the tx_bd_cons update visible to start_xmit()
+ * before checking for netif_tx_queue_stopped(). Without the
+ * memory barrier, there is a small possibility that
+ * start_xmit() will miss it and cause the queue to be stopped
+ * forever.
+ * On the other hand we need an rmb() here to ensure the proper
+ * ordering of bit testing in the following
+ * netif_tx_queue_stopped(txq) call.
+ */
+ smp_mb();
+
+ if (unlikely(netif_tx_queue_stopped(netdev_txq))) {
+ /* Taking tx_lock is needed to prevent reenabling the queue
+ * while it's empty. This could have happen if rx_action() gets
+ * suspended in qede_tx_int() after the condition before
+ * netif_tx_wake_queue(), while tx_action (qede_start_xmit()):
+ *
+ * stops the queue->sees fresh tx_bd_cons->releases the queue->
+ * sends some packets consuming the whole queue again->
+ * stops the queue
+ */
+
+ __netif_tx_lock(netdev_txq, smp_processor_id());
+
+ if ((netif_tx_queue_stopped(netdev_txq)) &&
+ (edev->state == QEDE_STATE_OPEN) &&
+ (qed_chain_get_elem_left(&txq->tx_pbl)
+ >= (MAX_SKB_FRAGS + 1))) {
+ netif_tx_wake_queue(netdev_txq);
+ DP_VERBOSE(edev, NETIF_MSG_TX_DONE,
+ "Wake queue was called\n");
+ }
+
+ __netif_tx_unlock(netdev_txq);
+ }
+
+ return 0;
+}
+
+bool qede_has_rx_work(struct qede_rx_queue *rxq)
+{
+ u16 hw_comp_cons, sw_comp_cons;
+
+ /* Tell compiler that status block fields can change */
+ barrier();
+
+ hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+ sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+ return hw_comp_cons != sw_comp_cons;
+}
+
+static inline void qede_rx_bd_ring_consume(struct qede_rx_queue *rxq)
+{
+ qed_chain_consume(&rxq->rx_bd_ring);
+ rxq->sw_rx_cons++;
+}
+
+/* This function reuses the buffer(from an offset) from
+ * consumer index to producer index in the bd ring
+ */
+static inline void qede_reuse_page(struct qede_rx_queue *rxq,
+ struct sw_rx_data *curr_cons)
+{
+ struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring);
+ struct sw_rx_data *curr_prod;
+ dma_addr_t new_mapping;
+
+ curr_prod = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+ *curr_prod = *curr_cons;
+
+ new_mapping = curr_prod->mapping + curr_prod->page_offset;
+
+ rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(new_mapping));
+ rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(new_mapping));
+
+ rxq->sw_rx_prod++;
+ curr_cons->data = NULL;
+}
+
+/* In case of allocation failures reuse buffers
+ * from consumer index to produce buffers for firmware
+ */
+void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, u8 count)
+{
+ struct sw_rx_data *curr_cons;
+
+ for (; count > 0; count--) {
+ curr_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX];
+ qede_reuse_page(rxq, curr_cons);
+ qede_rx_bd_ring_consume(rxq);
+ }
+}
+
+static inline int qede_realloc_rx_buffer(struct qede_rx_queue *rxq,
+ struct sw_rx_data *curr_cons)
+{
+ /* Move to the next segment in the page */
+ curr_cons->page_offset += rxq->rx_buf_seg_size;
+
+ if (curr_cons->page_offset == PAGE_SIZE) {
+ if (unlikely(qede_alloc_rx_buffer(rxq))) {
+ /* Since we failed to allocate new buffer
+ * current buffer can be used again.
+ */
+ curr_cons->page_offset -= rxq->rx_buf_seg_size;
+
+ return -ENOMEM;
+ }
+
+ dma_unmap_page(rxq->dev, curr_cons->mapping,
+ PAGE_SIZE, rxq->data_direction);
+ } else {
+ /* Increment refcount of the page as we don't want
+ * network stack to take the ownership of the page
+ * which can be recycled multiple times by the driver.
+ */
+ page_ref_inc(curr_cons->data);
+ qede_reuse_page(rxq, curr_cons);
+ }
+
+ return 0;
+}
+
+void qede_update_rx_prod(struct qede_dev *edev, struct qede_rx_queue *rxq)
+{
+ u16 bd_prod = qed_chain_get_prod_idx(&rxq->rx_bd_ring);
+ u16 cqe_prod = qed_chain_get_prod_idx(&rxq->rx_comp_ring);
+ struct eth_rx_prod_data rx_prods = {0};
+
+ /* Update producers */
+ rx_prods.bd_prod = cpu_to_le16(bd_prod);
+ rx_prods.cqe_prod = cpu_to_le16(cqe_prod);
+
+ /* Make sure that the BD and SGE data is updated before updating the
+ * producers since FW might read the BD/SGE right after the producer
+ * is updated.
+ */
+ wmb();
+
+ internal_ram_wr(rxq->hw_rxq_prod_addr, sizeof(rx_prods),
+ (u32 *)&rx_prods);
+
+ /* mmiowb is needed to synchronize doorbell writes from more than one
+ * processor. It guarantees that the write arrives to the device before
+ * the napi lock is released and another qede_poll is called (possibly
+ * on another CPU). Without this barrier, the next doorbell can bypass
+ * this doorbell. This is applicable to IA64/Altix systems.
+ */
+ mmiowb();
+}
+
+static void qede_get_rxhash(struct sk_buff *skb, u8 bitfields, __le32 rss_hash)
+{
+ enum pkt_hash_types hash_type = PKT_HASH_TYPE_NONE;
+ enum rss_hash_type htype;
+ u32 hash = 0;
+
+ htype = GET_FIELD(bitfields, ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE);
+ if (htype) {
+ hash_type = ((htype == RSS_HASH_TYPE_IPV4) ||
+ (htype == RSS_HASH_TYPE_IPV6)) ?
+ PKT_HASH_TYPE_L3 : PKT_HASH_TYPE_L4;
+ hash = le32_to_cpu(rss_hash);
+ }
+ skb_set_hash(skb, hash, hash_type);
+}
+
+static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag)
+{
+ skb_checksum_none_assert(skb);
+
+ if (csum_flag & QEDE_CSUM_UNNECESSARY)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ if (csum_flag & QEDE_TUNN_CSUM_UNNECESSARY)
+ skb->csum_level = 1;
+}
+
+static inline void qede_skb_receive(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct qede_rx_queue *rxq,
+ struct sk_buff *skb, u16 vlan_tag)
+{
+ if (vlan_tag)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
+
+ napi_gro_receive(&fp->napi, skb);
+ fp->rxq->rcv_pkts++;
+}
+
+static void qede_set_gro_params(struct qede_dev *edev,
+ struct sk_buff *skb,
+ struct eth_fast_path_rx_tpa_start_cqe *cqe)
+{
+ u16 parsing_flags = le16_to_cpu(cqe->pars_flags.flags);
+
+ if (((parsing_flags >> PARSING_AND_ERR_FLAGS_L3TYPE_SHIFT) &
+ PARSING_AND_ERR_FLAGS_L3TYPE_MASK) == 2)
+ skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
+ else
+ skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
+
+ skb_shinfo(skb)->gso_size = __le16_to_cpu(cqe->len_on_first_bd) -
+ cqe->header_len;
+}
+
+static int qede_fill_frag_skb(struct qede_dev *edev,
+ struct qede_rx_queue *rxq,
+ u8 tpa_agg_index, u16 len_on_bd)
+{
+ struct sw_rx_data *current_bd = &rxq->sw_rx_ring[rxq->sw_rx_cons &
+ NUM_RX_BDS_MAX];
+ struct qede_agg_info *tpa_info = &rxq->tpa_info[tpa_agg_index];
+ struct sk_buff *skb = tpa_info->skb;
+
+ if (unlikely(tpa_info->state != QEDE_AGG_STATE_START))
+ goto out;
+
+ /* Add one frag and update the appropriate fields in the skb */
+ skb_fill_page_desc(skb, tpa_info->frag_id++,
+ current_bd->data, current_bd->page_offset,
+ len_on_bd);
+
+ if (unlikely(qede_realloc_rx_buffer(rxq, current_bd))) {
+ /* Incr page ref count to reuse on allocation failure
+ * so that it doesn't get freed while freeing SKB.
+ */
+ page_ref_inc(current_bd->data);
+ goto out;
+ }
+
+ qed_chain_consume(&rxq->rx_bd_ring);
+ rxq->sw_rx_cons++;
+
+ skb->data_len += len_on_bd;
+ skb->truesize += rxq->rx_buf_seg_size;
+ skb->len += len_on_bd;
+
+ return 0;
+
+out:
+ tpa_info->state = QEDE_AGG_STATE_ERROR;
+ qede_recycle_rx_bd_ring(rxq, 1);
+
+ return -ENOMEM;
+}
+
+static bool qede_tunn_exist(u16 flag)
+{
+ return !!(flag & (PARSING_AND_ERR_FLAGS_TUNNELEXIST_MASK <<
+ PARSING_AND_ERR_FLAGS_TUNNELEXIST_SHIFT));
+}
+
+static u8 qede_check_tunn_csum(u16 flag)
+{
+ u16 csum_flag = 0;
+ u8 tcsum = 0;
+
+ if (flag & (PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMWASCALCULATED_MASK <<
+ PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMWASCALCULATED_SHIFT))
+ csum_flag |= PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMERROR_SHIFT;
+
+ if (flag & (PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK <<
+ PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT)) {
+ csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT;
+ tcsum = QEDE_TUNN_CSUM_UNNECESSARY;
+ }
+
+ csum_flag |= PARSING_AND_ERR_FLAGS_TUNNELIPHDRERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_TUNNELIPHDRERROR_SHIFT |
+ PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT;
+
+ if (csum_flag & flag)
+ return QEDE_CSUM_ERROR;
+
+ return QEDE_CSUM_UNNECESSARY | tcsum;
+}
+
+static void qede_tpa_start(struct qede_dev *edev,
+ struct qede_rx_queue *rxq,
+ struct eth_fast_path_rx_tpa_start_cqe *cqe)
+{
+ struct qede_agg_info *tpa_info = &rxq->tpa_info[cqe->tpa_agg_index];
+ struct eth_rx_bd *rx_bd_cons = qed_chain_consume(&rxq->rx_bd_ring);
+ struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring);
+ struct sw_rx_data *replace_buf = &tpa_info->buffer;
+ dma_addr_t mapping = tpa_info->buffer_mapping;
+ struct sw_rx_data *sw_rx_data_cons;
+ struct sw_rx_data *sw_rx_data_prod;
+
+ sw_rx_data_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX];
+ sw_rx_data_prod = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+
+ /* Use pre-allocated replacement buffer - we can't release the agg.
+ * start until its over and we don't want to risk allocation failing
+ * here, so re-allocate when aggregation will be over.
+ */
+ sw_rx_data_prod->mapping = replace_buf->mapping;
+
+ sw_rx_data_prod->data = replace_buf->data;
+ rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(mapping));
+ rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(mapping));
+ sw_rx_data_prod->page_offset = replace_buf->page_offset;
+
+ rxq->sw_rx_prod++;
+
+ /* move partial skb from cons to pool (don't unmap yet)
+ * save mapping, incase we drop the packet later on.
+ */
+ tpa_info->buffer = *sw_rx_data_cons;
+ mapping = HILO_U64(le32_to_cpu(rx_bd_cons->addr.hi),
+ le32_to_cpu(rx_bd_cons->addr.lo));
+
+ tpa_info->buffer_mapping = mapping;
+ rxq->sw_rx_cons++;
+
+ /* set tpa state to start only if we are able to allocate skb
+ * for this aggregation, otherwise mark as error and aggregation will
+ * be dropped
+ */
+ tpa_info->skb = netdev_alloc_skb(edev->ndev,
+ le16_to_cpu(cqe->len_on_first_bd));
+ if (unlikely(!tpa_info->skb)) {
+ DP_NOTICE(edev, "Failed to allocate SKB for gro\n");
+ tpa_info->state = QEDE_AGG_STATE_ERROR;
+ goto cons_buf;
+ }
+
+ /* Start filling in the aggregation info */
+ skb_put(tpa_info->skb, le16_to_cpu(cqe->len_on_first_bd));
+ tpa_info->frag_id = 0;
+ tpa_info->state = QEDE_AGG_STATE_START;
+
+ /* Store some information from first CQE */
+ tpa_info->start_cqe_placement_offset = cqe->placement_offset;
+ tpa_info->start_cqe_bd_len = le16_to_cpu(cqe->len_on_first_bd);
+ if ((le16_to_cpu(cqe->pars_flags.flags) >>
+ PARSING_AND_ERR_FLAGS_TAG8021QEXIST_SHIFT) &
+ PARSING_AND_ERR_FLAGS_TAG8021QEXIST_MASK)
+ tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag);
+ else
+ tpa_info->vlan_tag = 0;
+
+ qede_get_rxhash(tpa_info->skb, cqe->bitfields, cqe->rss_hash);
+
+ /* This is needed in order to enable forwarding support */
+ qede_set_gro_params(edev, tpa_info->skb, cqe);
+
+cons_buf: /* We still need to handle bd_len_list to consume buffers */
+ if (likely(cqe->ext_bd_len_list[0]))
+ qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index,
+ le16_to_cpu(cqe->ext_bd_len_list[0]));
+
+ if (unlikely(cqe->ext_bd_len_list[1])) {
+ DP_ERR(edev,
+ "Unlikely - got a TPA aggregation with more than one ext_bd_len_list entry in the TPA start\n");
+ tpa_info->state = QEDE_AGG_STATE_ERROR;
+ }
+}
+
+#ifdef CONFIG_INET
+static void qede_gro_ip_csum(struct sk_buff *skb)
+{
+ const struct iphdr *iph = ip_hdr(skb);
+ struct tcphdr *th;
+
+ skb_set_transport_header(skb, sizeof(struct iphdr));
+ th = tcp_hdr(skb);
+
+ th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb),
+ iph->saddr, iph->daddr, 0);
+
+ tcp_gro_complete(skb);
+}
+
+static void qede_gro_ipv6_csum(struct sk_buff *skb)
+{
+ struct ipv6hdr *iph = ipv6_hdr(skb);
+ struct tcphdr *th;
+
+ skb_set_transport_header(skb, sizeof(struct ipv6hdr));
+ th = tcp_hdr(skb);
+
+ th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb),
+ &iph->saddr, &iph->daddr, 0);
+ tcp_gro_complete(skb);
+}
+#endif
+
+static void qede_gro_receive(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct sk_buff *skb,
+ u16 vlan_tag)
+{
+ /* FW can send a single MTU sized packet from gro flow
+ * due to aggregation timeout/last segment etc. which
+ * is not expected to be a gro packet. If a skb has zero
+ * frags then simply push it in the stack as non gso skb.
+ */
+ if (unlikely(!skb->data_len)) {
+ skb_shinfo(skb)->gso_type = 0;
+ skb_shinfo(skb)->gso_size = 0;
+ goto send_skb;
+ }
+
+#ifdef CONFIG_INET
+ if (skb_shinfo(skb)->gso_size) {
+ skb_reset_network_header(skb);
+
+ switch (skb->protocol) {
+ case htons(ETH_P_IP):
+ qede_gro_ip_csum(skb);
+ break;
+ case htons(ETH_P_IPV6):
+ qede_gro_ipv6_csum(skb);
+ break;
+ default:
+ DP_ERR(edev,
+ "Error: FW GRO supports only IPv4/IPv6, not 0x%04x\n",
+ ntohs(skb->protocol));
+ }
+ }
+#endif
+
+send_skb:
+ skb_record_rx_queue(skb, fp->rxq->rxq_id);
+ qede_skb_receive(edev, fp, fp->rxq, skb, vlan_tag);
+}
+
+static inline void qede_tpa_cont(struct qede_dev *edev,
+ struct qede_rx_queue *rxq,
+ struct eth_fast_path_rx_tpa_cont_cqe *cqe)
+{
+ int i;
+
+ for (i = 0; cqe->len_list[i]; i++)
+ qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index,
+ le16_to_cpu(cqe->len_list[i]));
+
+ if (unlikely(i > 1))
+ DP_ERR(edev,
+ "Strange - TPA cont with more than a single len_list entry\n");
+}
+
+static void qede_tpa_end(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct eth_fast_path_rx_tpa_end_cqe *cqe)
+{
+ struct qede_rx_queue *rxq = fp->rxq;
+ struct qede_agg_info *tpa_info;
+ struct sk_buff *skb;
+ int i;
+
+ tpa_info = &rxq->tpa_info[cqe->tpa_agg_index];
+ skb = tpa_info->skb;
+
+ for (i = 0; cqe->len_list[i]; i++)
+ qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index,
+ le16_to_cpu(cqe->len_list[i]));
+ if (unlikely(i > 1))
+ DP_ERR(edev,
+ "Strange - TPA emd with more than a single len_list entry\n");
+
+ if (unlikely(tpa_info->state != QEDE_AGG_STATE_START))
+ goto err;
+
+ /* Sanity */
+ if (unlikely(cqe->num_of_bds != tpa_info->frag_id + 1))
+ DP_ERR(edev,
+ "Strange - TPA had %02x BDs, but SKB has only %d frags\n",
+ cqe->num_of_bds, tpa_info->frag_id);
+ if (unlikely(skb->len != le16_to_cpu(cqe->total_packet_len)))
+ DP_ERR(edev,
+ "Strange - total packet len [cqe] is %4x but SKB has len %04x\n",
+ le16_to_cpu(cqe->total_packet_len), skb->len);
+
+ memcpy(skb->data,
+ page_address(tpa_info->buffer.data) +
+ tpa_info->start_cqe_placement_offset +
+ tpa_info->buffer.page_offset, tpa_info->start_cqe_bd_len);
+
+ /* Finalize the SKB */
+ skb->protocol = eth_type_trans(skb, edev->ndev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count
+ * to skb_shinfo(skb)->gso_segs
+ */
+ NAPI_GRO_CB(skb)->count = le16_to_cpu(cqe->num_of_coalesced_segs);
+
+ qede_gro_receive(edev, fp, skb, tpa_info->vlan_tag);
+
+ tpa_info->state = QEDE_AGG_STATE_NONE;
+
+ return;
+err:
+ tpa_info->state = QEDE_AGG_STATE_NONE;
+ dev_kfree_skb_any(tpa_info->skb);
+ tpa_info->skb = NULL;
+}
+
+static u8 qede_check_notunn_csum(u16 flag)
+{
+ u16 csum_flag = 0;
+ u8 csum = 0;
+
+ if (flag & (PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK <<
+ PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT)) {
+ csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT;
+ csum = QEDE_CSUM_UNNECESSARY;
+ }
+
+ csum_flag |= PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT;
+
+ if (csum_flag & flag)
+ return QEDE_CSUM_ERROR;
+
+ return csum;
+}
+
+static u8 qede_check_csum(u16 flag)
+{
+ if (!qede_tunn_exist(flag))
+ return qede_check_notunn_csum(flag);
+ else
+ return qede_check_tunn_csum(flag);
+}
+
+static bool qede_pkt_is_ip_fragmented(struct eth_fast_path_rx_reg_cqe *cqe,
+ u16 flag)
+{
+ u8 tun_pars_flg = cqe->tunnel_pars_flags.flags;
+
+ if ((tun_pars_flg & (ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_MASK <<
+ ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_SHIFT)) ||
+ (flag & (PARSING_AND_ERR_FLAGS_IPV4FRAG_MASK <<
+ PARSING_AND_ERR_FLAGS_IPV4FRAG_SHIFT)))
+ return true;
+
+ return false;
+}
+
+/* Return true iff packet is to be passed to stack */
+static bool qede_rx_xdp(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct qede_rx_queue *rxq,
+ struct bpf_prog *prog,
+ struct sw_rx_data *bd,
+ struct eth_fast_path_rx_reg_cqe *cqe)
+{
+ u16 len = le16_to_cpu(cqe->len_on_first_bd);
+ struct xdp_buff xdp;
+ enum xdp_action act;
+
+ xdp.data = page_address(bd->data) + cqe->placement_offset;
+ xdp.data_end = xdp.data + len;
+
+ /* Queues always have a full reset currently, so for the time
+ * being until there's atomic program replace just mark read
+ * side for map helpers.
+ */
+ rcu_read_lock();
+ act = bpf_prog_run_xdp(prog, &xdp);
+ rcu_read_unlock();
+
+ if (act == XDP_PASS)
+ return true;
+
+ /* Count number of packets not to be passed to stack */
+ rxq->xdp_no_pass++;
+
+ switch (act) {
+ case XDP_TX:
+ /* We need the replacement buffer before transmit. */
+ if (qede_alloc_rx_buffer(rxq)) {
+ qede_recycle_rx_bd_ring(rxq, 1);
+ return false;
+ }
+
+ /* Now if there's a transmission problem, we'd still have to
+ * throw current buffer, as replacement was already allocated.
+ */
+ if (qede_xdp_xmit(edev, fp, bd, cqe->placement_offset, len)) {
+ dma_unmap_page(rxq->dev, bd->mapping,
+ PAGE_SIZE, DMA_BIDIRECTIONAL);
+ __free_page(bd->data);
+ }
+
+ /* Regardless, we've consumed an Rx BD */
+ qede_rx_bd_ring_consume(rxq);
+ return false;
+
+ default:
+ bpf_warn_invalid_xdp_action(act);
+ case XDP_ABORTED:
+ case XDP_DROP:
+ qede_recycle_rx_bd_ring(rxq, cqe->bd_num);
+ }
+
+ return false;
+}
+
+static struct sk_buff *qede_rx_allocate_skb(struct qede_dev *edev,
+ struct qede_rx_queue *rxq,
+ struct sw_rx_data *bd, u16 len,
+ u16 pad)
+{
+ unsigned int offset = bd->page_offset;
+ struct skb_frag_struct *frag;
+ struct page *page = bd->data;
+ unsigned int pull_len;
+ struct sk_buff *skb;
+ unsigned char *va;
+
+ /* Allocate a new SKB with a sufficient large header len */
+ skb = netdev_alloc_skb(edev->ndev, QEDE_RX_HDR_SIZE);
+ if (unlikely(!skb))
+ return NULL;
+
+ /* Copy data into SKB - if it's small, we can simply copy it and
+ * re-use the already allcoated & mapped memory.
+ */
+ if (len + pad <= edev->rx_copybreak) {
+ memcpy(skb_put(skb, len),
+ page_address(page) + pad + offset, len);
+ qede_reuse_page(rxq, bd);
+ goto out;
+ }
+
+ frag = &skb_shinfo(skb)->frags[0];
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+ page, pad + offset, len, rxq->rx_buf_seg_size);
+
+ va = skb_frag_address(frag);
+ pull_len = eth_get_headlen(va, QEDE_RX_HDR_SIZE);
+
+ /* Align the pull_len to optimize memcpy */
+ memcpy(skb->data, va, ALIGN(pull_len, sizeof(long)));
+
+ /* Correct the skb & frag sizes offset after the pull */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+
+ if (unlikely(qede_realloc_rx_buffer(rxq, bd))) {
+ /* Incr page ref count to reuse on allocation failure so
+ * that it doesn't get freed while freeing SKB [as its
+ * already mapped there].
+ */
+ page_ref_inc(page);
+ dev_kfree_skb_any(skb);
+ return NULL;
+ }
+
+out:
+ /* We've consumed the first BD and prepared an SKB */
+ qede_rx_bd_ring_consume(rxq);
+ return skb;
+}
+
+static int qede_rx_build_jumbo(struct qede_dev *edev,
+ struct qede_rx_queue *rxq,
+ struct sk_buff *skb,
+ struct eth_fast_path_rx_reg_cqe *cqe,
+ u16 first_bd_len)
+{
+ u16 pkt_len = le16_to_cpu(cqe->pkt_len);
+ struct sw_rx_data *bd;
+ u16 bd_cons_idx;
+ u8 num_frags;
+
+ pkt_len -= first_bd_len;
+
+ /* We've already used one BD for the SKB. Now take care of the rest */
+ for (num_frags = cqe->bd_num - 1; num_frags > 0; num_frags--) {
+ u16 cur_size = pkt_len > rxq->rx_buf_size ? rxq->rx_buf_size :
+ pkt_len;
+
+ if (unlikely(!cur_size)) {
+ DP_ERR(edev,
+ "Still got %d BDs for mapping jumbo, but length became 0\n",
+ num_frags);
+ goto out;
+ }
+
+ /* We need a replacement buffer for each BD */
+ if (unlikely(qede_alloc_rx_buffer(rxq)))
+ goto out;
+
+ /* Now that we've allocated the replacement buffer,
+ * we can safely consume the next BD and map it to the SKB.
+ */
+ bd_cons_idx = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
+ bd = &rxq->sw_rx_ring[bd_cons_idx];
+ qede_rx_bd_ring_consume(rxq);
+
+ dma_unmap_page(rxq->dev, bd->mapping,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags++,
+ bd->data, 0, cur_size);
+
+ skb->truesize += PAGE_SIZE;
+ skb->data_len += cur_size;
+ skb->len += cur_size;
+ pkt_len -= cur_size;
+ }
+
+ if (unlikely(pkt_len))
+ DP_ERR(edev,
+ "Mapped all BDs of jumbo, but still have %d bytes\n",
+ pkt_len);
+
+out:
+ return num_frags;
+}
+
+static int qede_rx_process_tpa_cqe(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct qede_rx_queue *rxq,
+ union eth_rx_cqe *cqe,
+ enum eth_rx_cqe_type type)
+{
+ switch (type) {
+ case ETH_RX_CQE_TYPE_TPA_START:
+ qede_tpa_start(edev, rxq, &cqe->fast_path_tpa_start);
+ return 0;
+ case ETH_RX_CQE_TYPE_TPA_CONT:
+ qede_tpa_cont(edev, rxq, &cqe->fast_path_tpa_cont);
+ return 0;
+ case ETH_RX_CQE_TYPE_TPA_END:
+ qede_tpa_end(edev, fp, &cqe->fast_path_tpa_end);
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int qede_rx_process_cqe(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct qede_rx_queue *rxq)
+{
+ struct bpf_prog *xdp_prog = READ_ONCE(rxq->xdp_prog);
+ struct eth_fast_path_rx_reg_cqe *fp_cqe;
+ u16 len, pad, bd_cons_idx, parse_flag;
+ enum eth_rx_cqe_type cqe_type;
+ union eth_rx_cqe *cqe;
+ struct sw_rx_data *bd;
+ struct sk_buff *skb;
+ __le16 flags;
+ u8 csum_flag;
+
+ /* Get the CQE from the completion ring */
+ cqe = (union eth_rx_cqe *)qed_chain_consume(&rxq->rx_comp_ring);
+ cqe_type = cqe->fast_path_regular.type;
+
+ /* Process an unlikely slowpath event */
+ if (unlikely(cqe_type == ETH_RX_CQE_TYPE_SLOW_PATH)) {
+ struct eth_slow_path_rx_cqe *sp_cqe;
+
+ sp_cqe = (struct eth_slow_path_rx_cqe *)cqe;
+ edev->ops->eth_cqe_completion(edev->cdev, fp->id, sp_cqe);
+ return 0;
+ }
+
+ /* Handle TPA cqes */
+ if (cqe_type != ETH_RX_CQE_TYPE_REGULAR)
+ return qede_rx_process_tpa_cqe(edev, fp, rxq, cqe, cqe_type);
+
+ /* Get the data from the SW ring; Consume it only after it's evident
+ * we wouldn't recycle it.
+ */
+ bd_cons_idx = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
+ bd = &rxq->sw_rx_ring[bd_cons_idx];
+
+ fp_cqe = &cqe->fast_path_regular;
+ len = le16_to_cpu(fp_cqe->len_on_first_bd);
+ pad = fp_cqe->placement_offset;
+
+ /* Run eBPF program if one is attached */
+ if (xdp_prog)
+ if (!qede_rx_xdp(edev, fp, rxq, xdp_prog, bd, fp_cqe))
+ return 1;
+
+ /* If this is an error packet then drop it */
+ flags = cqe->fast_path_regular.pars_flags.flags;
+ parse_flag = le16_to_cpu(flags);
+
+ csum_flag = qede_check_csum(parse_flag);
+ if (unlikely(csum_flag == QEDE_CSUM_ERROR)) {
+ if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) {
+ rxq->rx_ip_frags++;
+ } else {
+ DP_NOTICE(edev,
+ "CQE has error, flags = %x, dropping incoming packet\n",
+ parse_flag);
+ rxq->rx_hw_errors++;
+ qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num);
+ return 0;
+ }
+ }
+
+ /* Basic validation passed; Need to prepare an SKB. This would also
+ * guarantee to finally consume the first BD upon success.
+ */
+ skb = qede_rx_allocate_skb(edev, rxq, bd, len, pad);
+ if (!skb) {
+ rxq->rx_alloc_errors++;
+ qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num);
+ return 0;
+ }
+
+ /* In case of Jumbo packet, several PAGE_SIZEd buffers will be pointed
+ * by a single cqe.
+ */
+ if (fp_cqe->bd_num > 1) {
+ u16 unmapped_frags = qede_rx_build_jumbo(edev, rxq, skb,
+ fp_cqe, len);
+
+ if (unlikely(unmapped_frags > 0)) {
+ qede_recycle_rx_bd_ring(rxq, unmapped_frags);
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+ }
+
+ /* The SKB contains all the data. Now prepare meta-magic */
+ skb->protocol = eth_type_trans(skb, edev->ndev);
+ qede_get_rxhash(skb, fp_cqe->bitfields, fp_cqe->rss_hash);
+ qede_set_skb_csum(skb, csum_flag);
+ skb_record_rx_queue(skb, rxq->rxq_id);
+
+ /* SKB is prepared - pass it to stack */
+ qede_skb_receive(edev, fp, rxq, skb, le16_to_cpu(fp_cqe->vlan_tag));
+
+ return 1;
+}
+
+static int qede_rx_int(struct qede_fastpath *fp, int budget)
+{
+ struct qede_rx_queue *rxq = fp->rxq;
+ struct qede_dev *edev = fp->edev;
+ u16 hw_comp_cons, sw_comp_cons;
+ int work_done = 0;
+
+ hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+ sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+ /* Memory barrier to prevent the CPU from doing speculative reads of CQE
+ * / BD in the while-loop before reading hw_comp_cons. If the CQE is
+ * read before it is written by FW, then FW writes CQE and SB, and then
+ * the CPU reads the hw_comp_cons, it will use an old CQE.
+ */
+ rmb();
+
+ /* Loop to complete all indicated BDs */
+ while ((sw_comp_cons != hw_comp_cons) && (work_done < budget)) {
+ qede_rx_process_cqe(edev, fp, rxq);
+ qed_chain_recycle_consumed(&rxq->rx_comp_ring);
+ sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+ work_done++;
+ }
+
+ /* Update producers */
+ qede_update_rx_prod(edev, rxq);
+
+ return work_done;
+}
+
+static bool qede_poll_is_more_work(struct qede_fastpath *fp)
+{
+ qed_sb_update_sb_idx(fp->sb_info);
+
+ /* *_has_*_work() reads the status block, thus we need to ensure that
+ * status block indices have been actually read (qed_sb_update_sb_idx)
+ * prior to this check (*_has_*_work) so that we won't write the
+ * "newer" value of the status block to HW (if there was a DMA right
+ * after qede_has_rx_work and if there is no rmb, the memory reading
+ * (qed_sb_update_sb_idx) may be postponed to right before *_ack_sb).
+ * In this case there will never be another interrupt until there is
+ * another update of the status block, while there is still unhandled
+ * work.
+ */
+ rmb();
+
+ if (likely(fp->type & QEDE_FASTPATH_RX))
+ if (qede_has_rx_work(fp->rxq))
+ return true;
+
+ if (fp->type & QEDE_FASTPATH_XDP)
+ if (qede_txq_has_work(fp->xdp_tx))
+ return true;
+
+ if (likely(fp->type & QEDE_FASTPATH_TX))
+ if (qede_txq_has_work(fp->txq))
+ return true;
+
+ return false;
+}
+
+/*********************
+ * NDO & API related *
+ *********************/
+int qede_poll(struct napi_struct *napi, int budget)
+{
+ struct qede_fastpath *fp = container_of(napi, struct qede_fastpath,
+ napi);
+ struct qede_dev *edev = fp->edev;
+ int rx_work_done = 0;
+
+ if (likely(fp->type & QEDE_FASTPATH_TX) && qede_txq_has_work(fp->txq))
+ qede_tx_int(edev, fp->txq);
+
+ if ((fp->type & QEDE_FASTPATH_XDP) && qede_txq_has_work(fp->xdp_tx))
+ qede_xdp_tx_int(edev, fp->xdp_tx);
+
+ rx_work_done = (likely(fp->type & QEDE_FASTPATH_RX) &&
+ qede_has_rx_work(fp->rxq)) ?
+ qede_rx_int(fp, budget) : 0;
+ if (rx_work_done < budget) {
+ if (!qede_poll_is_more_work(fp)) {
+ napi_complete(napi);
+
+ /* Update and reenable interrupts */
+ qed_sb_ack(fp->sb_info, IGU_INT_ENABLE, 1);
+ } else {
+ rx_work_done = budget;
+ }
+ }
+
+ if (fp->xdp_xmit) {
+ u16 xdp_prod = qed_chain_get_prod_idx(&fp->xdp_tx->tx_pbl);
+
+ fp->xdp_xmit = 0;
+ fp->xdp_tx->tx_db.data.bd_prod = cpu_to_le16(xdp_prod);
+ qede_update_tx_producer(fp->xdp_tx);
+ }
+
+ return rx_work_done;
+}
+
+irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie)
+{
+ struct qede_fastpath *fp = fp_cookie;
+
+ qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/);
+
+ napi_schedule_irqoff(&fp->napi);
+ return IRQ_HANDLED;
+}
+
+/* Main transmit function */
+netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct qede_dev *edev = netdev_priv(ndev);
+ struct netdev_queue *netdev_txq;
+ struct qede_tx_queue *txq;
+ struct eth_tx_1st_bd *first_bd;
+ struct eth_tx_2nd_bd *second_bd = NULL;
+ struct eth_tx_3rd_bd *third_bd = NULL;
+ struct eth_tx_bd *tx_data_bd = NULL;
+ u16 txq_index;
+ u8 nbd = 0;
+ dma_addr_t mapping;
+ int rc, frag_idx = 0, ipv6_ext = 0;
+ u8 xmit_type;
+ u16 idx;
+ u16 hlen;
+ bool data_split = false;
+
+ /* Get tx-queue context and netdev index */
+ txq_index = skb_get_queue_mapping(skb);
+ WARN_ON(txq_index >= QEDE_TSS_COUNT(edev));
+ txq = edev->fp_array[edev->fp_num_rx + txq_index].txq;
+ netdev_txq = netdev_get_tx_queue(ndev, txq_index);
+
+ WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) < (MAX_SKB_FRAGS + 1));
+
+ xmit_type = qede_xmit_type(skb, &ipv6_ext);
+
+#if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET)
+ if (qede_pkt_req_lin(skb, xmit_type)) {
+ if (skb_linearize(skb)) {
+ DP_NOTICE(edev,
+ "SKB linearization failed - silently dropping this SKB\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ }
+#endif
+
+ /* Fill the entry in the SW ring and the BDs in the FW ring */
+ idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+ txq->sw_tx_ring.skbs[idx].skb = skb;
+ first_bd = (struct eth_tx_1st_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ memset(first_bd, 0, sizeof(*first_bd));
+ first_bd->data.bd_flags.bitfields =
+ 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT;
+
+ /* Map skb linear data for DMA and set in the first BD */
+ mapping = dma_map_single(txq->dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(txq->dev, mapping))) {
+ DP_NOTICE(edev, "SKB mapping failed\n");
+ qede_free_failed_tx_pkt(txq, first_bd, 0, false);
+ qede_update_tx_producer(txq);
+ return NETDEV_TX_OK;
+ }
+ nbd++;
+ BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb));
+
+ /* In case there is IPv6 with extension headers or LSO we need 2nd and
+ * 3rd BDs.
+ */
+ if (unlikely((xmit_type & XMIT_LSO) | ipv6_ext)) {
+ second_bd = (struct eth_tx_2nd_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ memset(second_bd, 0, sizeof(*second_bd));
+
+ nbd++;
+ third_bd = (struct eth_tx_3rd_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ memset(third_bd, 0, sizeof(*third_bd));
+
+ nbd++;
+ /* We need to fill in additional data in second_bd... */
+ tx_data_bd = (struct eth_tx_bd *)second_bd;
+ }
+
+ if (skb_vlan_tag_present(skb)) {
+ first_bd->data.vlan = cpu_to_le16(skb_vlan_tag_get(skb));
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT;
+ }
+
+ /* Fill the parsing flags & params according to the requested offload */
+ if (xmit_type & XMIT_L4_CSUM) {
+ /* We don't re-calculate IP checksum as it is already done by
+ * the upper stack
+ */
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT;
+
+ if (xmit_type & XMIT_ENC) {
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT;
+ first_bd->data.bitfields |=
+ 1 << ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT;
+ }
+
+ /* Legacy FW had flipped behavior in regard to this bit -
+ * I.e., needed to set to prevent FW from touching encapsulated
+ * packets when it didn't need to.
+ */
+ if (unlikely(txq->is_legacy))
+ first_bd->data.bitfields ^=
+ 1 << ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT;
+
+ /* If the packet is IPv6 with extension header, indicate that
+ * to FW and pass few params, since the device cracker doesn't
+ * support parsing IPv6 with extension header/s.
+ */
+ if (unlikely(ipv6_ext))
+ qede_set_params_for_ipv6_ext(skb, second_bd, third_bd);
+ }
+
+ if (xmit_type & XMIT_LSO) {
+ first_bd->data.bd_flags.bitfields |=
+ (1 << ETH_TX_1ST_BD_FLAGS_LSO_SHIFT);
+ third_bd->data.lso_mss =
+ cpu_to_le16(skb_shinfo(skb)->gso_size);
+
+ if (unlikely(xmit_type & XMIT_ENC)) {
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_TUNN_IP_CSUM_SHIFT;
+
+ if (xmit_type & XMIT_ENC_GSO_L4_CSUM) {
+ u8 tmp = ETH_TX_1ST_BD_FLAGS_TUNN_L4_CSUM_SHIFT;
+
+ first_bd->data.bd_flags.bitfields |= 1 << tmp;
+ }
+ hlen = qede_get_skb_hlen(skb, true);
+ } else {
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT;
+ hlen = qede_get_skb_hlen(skb, false);
+ }
+
+ /* @@@TBD - if will not be removed need to check */
+ third_bd->data.bitfields |=
+ cpu_to_le16(1 << ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT);
+
+ /* Make life easier for FW guys who can't deal with header and
+ * data on same BD. If we need to split, use the second bd...
+ */
+ if (unlikely(skb_headlen(skb) > hlen)) {
+ DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+ "TSO split header size is %d (%x:%x)\n",
+ first_bd->nbytes, first_bd->addr.hi,
+ first_bd->addr.lo);
+
+ mapping = HILO_U64(le32_to_cpu(first_bd->addr.hi),
+ le32_to_cpu(first_bd->addr.lo)) +
+ hlen;
+
+ BD_SET_UNMAP_ADDR_LEN(tx_data_bd, mapping,
+ le16_to_cpu(first_bd->nbytes) -
+ hlen);
+
+ /* this marks the BD as one that has no
+ * individual mapping
+ */
+ txq->sw_tx_ring.skbs[idx].flags |= QEDE_TSO_SPLIT_BD;
+
+ first_bd->nbytes = cpu_to_le16(hlen);
+
+ tx_data_bd = (struct eth_tx_bd *)third_bd;
+ data_split = true;
+ }
+ } else {
+ first_bd->data.bitfields |=
+ (skb->len & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) <<
+ ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT;
+ }
+
+ /* Handle fragmented skb */
+ /* special handle for frags inside 2nd and 3rd bds.. */
+ while (tx_data_bd && frag_idx < skb_shinfo(skb)->nr_frags) {
+ rc = map_frag_to_bd(txq,
+ &skb_shinfo(skb)->frags[frag_idx],
+ tx_data_bd);
+ if (rc) {
+ qede_free_failed_tx_pkt(txq, first_bd, nbd, data_split);
+ qede_update_tx_producer(txq);
+ return NETDEV_TX_OK;
+ }
+
+ if (tx_data_bd == (struct eth_tx_bd *)second_bd)
+ tx_data_bd = (struct eth_tx_bd *)third_bd;
+ else
+ tx_data_bd = NULL;
+
+ frag_idx++;
+ }
+
+ /* map last frags into 4th, 5th .... */
+ for (; frag_idx < skb_shinfo(skb)->nr_frags; frag_idx++, nbd++) {
+ tx_data_bd = (struct eth_tx_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+
+ memset(tx_data_bd, 0, sizeof(*tx_data_bd));
+
+ rc = map_frag_to_bd(txq,
+ &skb_shinfo(skb)->frags[frag_idx],
+ tx_data_bd);
+ if (rc) {
+ qede_free_failed_tx_pkt(txq, first_bd, nbd, data_split);
+ qede_update_tx_producer(txq);
+ return NETDEV_TX_OK;
+ }
+ }
+
+ /* update the first BD with the actual num BDs */
+ first_bd->data.nbds = nbd;
+
+ netdev_tx_sent_queue(netdev_txq, skb->len);
+
+ skb_tx_timestamp(skb);
+
+ /* Advance packet producer only before sending the packet since mapping
+ * of pages may fail.
+ */
+ txq->sw_tx_prod++;
+
+ /* 'next page' entries are counted in the producer value */
+ txq->tx_db.data.bd_prod =
+ cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl));
+
+ if (!skb->xmit_more || netif_xmit_stopped(netdev_txq))
+ qede_update_tx_producer(txq);
+
+ if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl)
+ < (MAX_SKB_FRAGS + 1))) {
+ if (skb->xmit_more)
+ qede_update_tx_producer(txq);
+
+ netif_tx_stop_queue(netdev_txq);
+ txq->stopped_cnt++;
+ DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+ "Stop queue was called\n");
+ /* paired memory barrier is in qede_tx_int(), we have to keep
+ * ordering of set_bit() in netif_tx_stop_queue() and read of
+ * fp->bd_tx_cons
+ */
+ smp_mb();
+
+ if ((qed_chain_get_elem_left(&txq->tx_pbl) >=
+ (MAX_SKB_FRAGS + 1)) &&
+ (edev->state == QEDE_STATE_OPEN)) {
+ netif_tx_wake_queue(netdev_txq);
+ DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+ "Wake queue was called\n");
+ }
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/* 8B udp header + 8B base tunnel header + 32B option length */
+#define QEDE_MAX_TUN_HDR_LEN 48
+
+netdev_features_t qede_features_check(struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features)
+{
+ if (skb->encapsulation) {
+ u8 l4_proto = 0;
+
+ switch (vlan_get_protocol(skb)) {
+ case htons(ETH_P_IP):
+ l4_proto = ip_hdr(skb)->protocol;
+ break;
+ case htons(ETH_P_IPV6):
+ l4_proto = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ return features;
+ }
+
+ /* Disable offloads for geneve tunnels, as HW can't parse
+ * the geneve header which has option length greater than 32B.
+ */
+ if ((l4_proto == IPPROTO_UDP) &&
+ ((skb_inner_mac_header(skb) -
+ skb_transport_header(skb)) > QEDE_MAX_TUN_HDR_LEN))
+ return features & ~(NETIF_F_CSUM_MASK |
+ NETIF_F_GSO_MASK);
+ }
+
+ return features;
+}
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 0851fe3..1393bf4 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -317,1608 +317,6 @@ static void __exit qede_cleanup(void)
module_init(qede_init);
module_exit(qede_cleanup);
-/* -------------------------------------------------------------------------
- * START OF FAST-PATH
- * -------------------------------------------------------------------------
- */
-
-/* Unmap the data and free skb */
-static int qede_free_tx_pkt(struct qede_dev *edev,
- struct qede_tx_queue *txq, int *len)
-{
- u16 idx = txq->sw_tx_cons & NUM_TX_BDS_MAX;
- struct sk_buff *skb = txq->sw_tx_ring.skbs[idx].skb;
- struct eth_tx_1st_bd *first_bd;
- struct eth_tx_bd *tx_data_bd;
- int bds_consumed = 0;
- int nbds;
- bool data_split = txq->sw_tx_ring.skbs[idx].flags & QEDE_TSO_SPLIT_BD;
- int i, split_bd_len = 0;
-
- if (unlikely(!skb)) {
- DP_ERR(edev,
- "skb is null for txq idx=%d txq->sw_tx_cons=%d txq->sw_tx_prod=%d\n",
- idx, txq->sw_tx_cons, txq->sw_tx_prod);
- return -1;
- }
-
- *len = skb->len;
-
- first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
-
- bds_consumed++;
-
- nbds = first_bd->data.nbds;
-
- if (data_split) {
- struct eth_tx_bd *split = (struct eth_tx_bd *)
- qed_chain_consume(&txq->tx_pbl);
- split_bd_len = BD_UNMAP_LEN(split);
- bds_consumed++;
- }
- dma_unmap_single(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
- BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
-
- /* Unmap the data of the skb frags */
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, bds_consumed++) {
- tx_data_bd = (struct eth_tx_bd *)
- qed_chain_consume(&txq->tx_pbl);
- dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
- BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
- }
-
- while (bds_consumed++ < nbds)
- qed_chain_consume(&txq->tx_pbl);
-
- /* Free skb */
- dev_kfree_skb_any(skb);
- txq->sw_tx_ring.skbs[idx].skb = NULL;
- txq->sw_tx_ring.skbs[idx].flags = 0;
-
- return 0;
-}
-
-/* Unmap the data and free skb when mapping failed during start_xmit */
-static void qede_free_failed_tx_pkt(struct qede_tx_queue *txq,
- struct eth_tx_1st_bd *first_bd,
- int nbd, bool data_split)
-{
- u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
- struct sk_buff *skb = txq->sw_tx_ring.skbs[idx].skb;
- struct eth_tx_bd *tx_data_bd;
- int i, split_bd_len = 0;
-
- /* Return prod to its position before this skb was handled */
- qed_chain_set_prod(&txq->tx_pbl,
- le16_to_cpu(txq->tx_db.data.bd_prod), first_bd);
-
- first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl);
-
- if (data_split) {
- struct eth_tx_bd *split = (struct eth_tx_bd *)
- qed_chain_produce(&txq->tx_pbl);
- split_bd_len = BD_UNMAP_LEN(split);
- nbd--;
- }
-
- dma_unmap_single(txq->dev, BD_UNMAP_ADDR(first_bd),
- BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
-
- /* Unmap the data of the skb frags */
- for (i = 0; i < nbd; i++) {
- tx_data_bd = (struct eth_tx_bd *)
- qed_chain_produce(&txq->tx_pbl);
- if (tx_data_bd->nbytes)
- dma_unmap_page(txq->dev,
- BD_UNMAP_ADDR(tx_data_bd),
- BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
- }
-
- /* Return again prod to its position before this skb was handled */
- qed_chain_set_prod(&txq->tx_pbl,
- le16_to_cpu(txq->tx_db.data.bd_prod), first_bd);
-
- /* Free skb */
- dev_kfree_skb_any(skb);
- txq->sw_tx_ring.skbs[idx].skb = NULL;
- txq->sw_tx_ring.skbs[idx].flags = 0;
-}
-
-static u32 qede_xmit_type(struct sk_buff *skb, int *ipv6_ext)
-{
- u32 rc = XMIT_L4_CSUM;
- __be16 l3_proto;
-
- if (skb->ip_summed != CHECKSUM_PARTIAL)
- return XMIT_PLAIN;
-
- l3_proto = vlan_get_protocol(skb);
- if (l3_proto == htons(ETH_P_IPV6) &&
- (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
- *ipv6_ext = 1;
-
- if (skb->encapsulation) {
- rc |= XMIT_ENC;
- if (skb_is_gso(skb)) {
- unsigned short gso_type = skb_shinfo(skb)->gso_type;
-
- if ((gso_type & SKB_GSO_UDP_TUNNEL_CSUM) ||
- (gso_type & SKB_GSO_GRE_CSUM))
- rc |= XMIT_ENC_GSO_L4_CSUM;
-
- rc |= XMIT_LSO;
- return rc;
- }
- }
-
- if (skb_is_gso(skb))
- rc |= XMIT_LSO;
-
- return rc;
-}
-
-static void qede_set_params_for_ipv6_ext(struct sk_buff *skb,
- struct eth_tx_2nd_bd *second_bd,
- struct eth_tx_3rd_bd *third_bd)
-{
- u8 l4_proto;
- u16 bd2_bits1 = 0, bd2_bits2 = 0;
-
- bd2_bits1 |= (1 << ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT);
-
- bd2_bits2 |= ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) &
- ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK)
- << ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT;
-
- bd2_bits1 |= (ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH <<
- ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT);
-
- if (vlan_get_protocol(skb) == htons(ETH_P_IPV6))
- l4_proto = ipv6_hdr(skb)->nexthdr;
- else
- l4_proto = ip_hdr(skb)->protocol;
-
- if (l4_proto == IPPROTO_UDP)
- bd2_bits1 |= 1 << ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT;
-
- if (third_bd)
- third_bd->data.bitfields |=
- cpu_to_le16(((tcp_hdrlen(skb) / 4) &
- ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK) <<
- ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT);
-
- second_bd->data.bitfields1 = cpu_to_le16(bd2_bits1);
- second_bd->data.bitfields2 = cpu_to_le16(bd2_bits2);
-}
-
-static int map_frag_to_bd(struct qede_tx_queue *txq,
- skb_frag_t *frag, struct eth_tx_bd *bd)
-{
- dma_addr_t mapping;
-
- /* Map skb non-linear frag data for DMA */
- mapping = skb_frag_dma_map(txq->dev, frag, 0,
- skb_frag_size(frag), DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(txq->dev, mapping)))
- return -ENOMEM;
-
- /* Setup the data pointer of the frag data */
- BD_SET_UNMAP_ADDR_LEN(bd, mapping, skb_frag_size(frag));
-
- return 0;
-}
-
-static u16 qede_get_skb_hlen(struct sk_buff *skb, bool is_encap_pkt)
-{
- if (is_encap_pkt)
- return (skb_inner_transport_header(skb) +
- inner_tcp_hdrlen(skb) - skb->data);
- else
- return (skb_transport_header(skb) +
- tcp_hdrlen(skb) - skb->data);
-}
-
-/* +2 for 1st BD for headers and 2nd BD for headlen (if required) */
-#if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET)
-static bool qede_pkt_req_lin(struct sk_buff *skb, u8 xmit_type)
-{
- int allowed_frags = ETH_TX_MAX_BDS_PER_NON_LSO_PACKET - 1;
-
- if (xmit_type & XMIT_LSO) {
- int hlen;
-
- hlen = qede_get_skb_hlen(skb, xmit_type & XMIT_ENC);
-
- /* linear payload would require its own BD */
- if (skb_headlen(skb) > hlen)
- allowed_frags--;
- }
-
- return (skb_shinfo(skb)->nr_frags > allowed_frags);
-}
-#endif
-
-static inline void qede_update_tx_producer(struct qede_tx_queue *txq)
-{
- /* wmb makes sure that the BDs data is updated before updating the
- * producer, otherwise FW may read old data from the BDs.
- */
- wmb();
- barrier();
- writel(txq->tx_db.raw, txq->doorbell_addr);
-
- /* mmiowb is needed to synchronize doorbell writes from more than one
- * processor. It guarantees that the write arrives to the device before
- * the queue lock is released and another start_xmit is called (possibly
- * on another CPU). Without this barrier, the next doorbell can bypass
- * this doorbell. This is applicable to IA64/Altix systems.
- */
- mmiowb();
-}
-
-static int qede_xdp_xmit(struct qede_dev *edev, struct qede_fastpath *fp,
- struct sw_rx_data *metadata, u16 padding, u16 length)
-{
- struct qede_tx_queue *txq = fp->xdp_tx;
- u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
- struct eth_tx_1st_bd *first_bd;
-
- if (!qed_chain_get_elem_left(&txq->tx_pbl)) {
- txq->stopped_cnt++;
- return -ENOMEM;
- }
-
- first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl);
-
- memset(first_bd, 0, sizeof(*first_bd));
- first_bd->data.bd_flags.bitfields =
- BIT(ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT);
- first_bd->data.bitfields |=
- (length & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) <<
- ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT;
- first_bd->data.nbds = 1;
-
- /* We can safely ignore the offset, as it's 0 for XDP */
- BD_SET_UNMAP_ADDR_LEN(first_bd, metadata->mapping + padding, length);
-
- /* Synchronize the buffer back to device, as program [probably]
- * has changed it.
- */
- dma_sync_single_for_device(&edev->pdev->dev,
- metadata->mapping + padding,
- length, PCI_DMA_TODEVICE);
-
- txq->sw_tx_ring.pages[idx] = metadata->data;
- txq->sw_tx_prod++;
-
- /* Mark the fastpath for future XDP doorbell */
- fp->xdp_xmit = 1;
-
- return 0;
-}
-
-/* Main transmit function */
-static netdev_tx_t qede_start_xmit(struct sk_buff *skb,
- struct net_device *ndev)
-{
- struct qede_dev *edev = netdev_priv(ndev);
- struct netdev_queue *netdev_txq;
- struct qede_tx_queue *txq;
- struct eth_tx_1st_bd *first_bd;
- struct eth_tx_2nd_bd *second_bd = NULL;
- struct eth_tx_3rd_bd *third_bd = NULL;
- struct eth_tx_bd *tx_data_bd = NULL;
- u16 txq_index;
- u8 nbd = 0;
- dma_addr_t mapping;
- int rc, frag_idx = 0, ipv6_ext = 0;
- u8 xmit_type;
- u16 idx;
- u16 hlen;
- bool data_split = false;
-
- /* Get tx-queue context and netdev index */
- txq_index = skb_get_queue_mapping(skb);
- WARN_ON(txq_index >= QEDE_TSS_COUNT(edev));
- txq = edev->fp_array[edev->fp_num_rx + txq_index].txq;
- netdev_txq = netdev_get_tx_queue(ndev, txq_index);
-
- WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) < (MAX_SKB_FRAGS + 1));
-
- xmit_type = qede_xmit_type(skb, &ipv6_ext);
-
-#if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET)
- if (qede_pkt_req_lin(skb, xmit_type)) {
- if (skb_linearize(skb)) {
- DP_NOTICE(edev,
- "SKB linearization failed - silently dropping this SKB\n");
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
- }
-#endif
-
- /* Fill the entry in the SW ring and the BDs in the FW ring */
- idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
- txq->sw_tx_ring.skbs[idx].skb = skb;
- first_bd = (struct eth_tx_1st_bd *)
- qed_chain_produce(&txq->tx_pbl);
- memset(first_bd, 0, sizeof(*first_bd));
- first_bd->data.bd_flags.bitfields =
- 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT;
-
- /* Map skb linear data for DMA and set in the first BD */
- mapping = dma_map_single(txq->dev, skb->data,
- skb_headlen(skb), DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(txq->dev, mapping))) {
- DP_NOTICE(edev, "SKB mapping failed\n");
- qede_free_failed_tx_pkt(txq, first_bd, 0, false);
- qede_update_tx_producer(txq);
- return NETDEV_TX_OK;
- }
- nbd++;
- BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb));
-
- /* In case there is IPv6 with extension headers or LSO we need 2nd and
- * 3rd BDs.
- */
- if (unlikely((xmit_type & XMIT_LSO) | ipv6_ext)) {
- second_bd = (struct eth_tx_2nd_bd *)
- qed_chain_produce(&txq->tx_pbl);
- memset(second_bd, 0, sizeof(*second_bd));
-
- nbd++;
- third_bd = (struct eth_tx_3rd_bd *)
- qed_chain_produce(&txq->tx_pbl);
- memset(third_bd, 0, sizeof(*third_bd));
-
- nbd++;
- /* We need to fill in additional data in second_bd... */
- tx_data_bd = (struct eth_tx_bd *)second_bd;
- }
-
- if (skb_vlan_tag_present(skb)) {
- first_bd->data.vlan = cpu_to_le16(skb_vlan_tag_get(skb));
- first_bd->data.bd_flags.bitfields |=
- 1 << ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT;
- }
-
- /* Fill the parsing flags & params according to the requested offload */
- if (xmit_type & XMIT_L4_CSUM) {
- /* We don't re-calculate IP checksum as it is already done by
- * the upper stack
- */
- first_bd->data.bd_flags.bitfields |=
- 1 << ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT;
-
- if (xmit_type & XMIT_ENC) {
- first_bd->data.bd_flags.bitfields |=
- 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT;
- first_bd->data.bitfields |=
- 1 << ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT;
- }
-
- /* Legacy FW had flipped behavior in regard to this bit -
- * I.e., needed to set to prevent FW from touching encapsulated
- * packets when it didn't need to.
- */
- if (unlikely(txq->is_legacy))
- first_bd->data.bitfields ^=
- 1 << ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT;
-
- /* If the packet is IPv6 with extension header, indicate that
- * to FW and pass few params, since the device cracker doesn't
- * support parsing IPv6 with extension header/s.
- */
- if (unlikely(ipv6_ext))
- qede_set_params_for_ipv6_ext(skb, second_bd, third_bd);
- }
-
- if (xmit_type & XMIT_LSO) {
- first_bd->data.bd_flags.bitfields |=
- (1 << ETH_TX_1ST_BD_FLAGS_LSO_SHIFT);
- third_bd->data.lso_mss =
- cpu_to_le16(skb_shinfo(skb)->gso_size);
-
- if (unlikely(xmit_type & XMIT_ENC)) {
- first_bd->data.bd_flags.bitfields |=
- 1 << ETH_TX_1ST_BD_FLAGS_TUNN_IP_CSUM_SHIFT;
-
- if (xmit_type & XMIT_ENC_GSO_L4_CSUM) {
- u8 tmp = ETH_TX_1ST_BD_FLAGS_TUNN_L4_CSUM_SHIFT;
-
- first_bd->data.bd_flags.bitfields |= 1 << tmp;
- }
- hlen = qede_get_skb_hlen(skb, true);
- } else {
- first_bd->data.bd_flags.bitfields |=
- 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT;
- hlen = qede_get_skb_hlen(skb, false);
- }
-
- /* @@@TBD - if will not be removed need to check */
- third_bd->data.bitfields |=
- cpu_to_le16((1 << ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT));
-
- /* Make life easier for FW guys who can't deal with header and
- * data on same BD. If we need to split, use the second bd...
- */
- if (unlikely(skb_headlen(skb) > hlen)) {
- DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
- "TSO split header size is %d (%x:%x)\n",
- first_bd->nbytes, first_bd->addr.hi,
- first_bd->addr.lo);
-
- mapping = HILO_U64(le32_to_cpu(first_bd->addr.hi),
- le32_to_cpu(first_bd->addr.lo)) +
- hlen;
-
- BD_SET_UNMAP_ADDR_LEN(tx_data_bd, mapping,
- le16_to_cpu(first_bd->nbytes) -
- hlen);
-
- /* this marks the BD as one that has no
- * individual mapping
- */
- txq->sw_tx_ring.skbs[idx].flags |= QEDE_TSO_SPLIT_BD;
-
- first_bd->nbytes = cpu_to_le16(hlen);
-
- tx_data_bd = (struct eth_tx_bd *)third_bd;
- data_split = true;
- }
- } else {
- first_bd->data.bitfields |=
- (skb->len & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) <<
- ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT;
- }
-
- /* Handle fragmented skb */
- /* special handle for frags inside 2nd and 3rd bds.. */
- while (tx_data_bd && frag_idx < skb_shinfo(skb)->nr_frags) {
- rc = map_frag_to_bd(txq,
- &skb_shinfo(skb)->frags[frag_idx],
- tx_data_bd);
- if (rc) {
- qede_free_failed_tx_pkt(txq, first_bd, nbd, data_split);
- qede_update_tx_producer(txq);
- return NETDEV_TX_OK;
- }
-
- if (tx_data_bd == (struct eth_tx_bd *)second_bd)
- tx_data_bd = (struct eth_tx_bd *)third_bd;
- else
- tx_data_bd = NULL;
-
- frag_idx++;
- }
-
- /* map last frags into 4th, 5th .... */
- for (; frag_idx < skb_shinfo(skb)->nr_frags; frag_idx++, nbd++) {
- tx_data_bd = (struct eth_tx_bd *)
- qed_chain_produce(&txq->tx_pbl);
-
- memset(tx_data_bd, 0, sizeof(*tx_data_bd));
-
- rc = map_frag_to_bd(txq,
- &skb_shinfo(skb)->frags[frag_idx],
- tx_data_bd);
- if (rc) {
- qede_free_failed_tx_pkt(txq, first_bd, nbd, data_split);
- qede_update_tx_producer(txq);
- return NETDEV_TX_OK;
- }
- }
-
- /* update the first BD with the actual num BDs */
- first_bd->data.nbds = nbd;
-
- netdev_tx_sent_queue(netdev_txq, skb->len);
-
- skb_tx_timestamp(skb);
-
- /* Advance packet producer only before sending the packet since mapping
- * of pages may fail.
- */
- txq->sw_tx_prod++;
-
- /* 'next page' entries are counted in the producer value */
- txq->tx_db.data.bd_prod =
- cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl));
-
- if (!skb->xmit_more || netif_xmit_stopped(netdev_txq))
- qede_update_tx_producer(txq);
-
- if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl)
- < (MAX_SKB_FRAGS + 1))) {
- if (skb->xmit_more)
- qede_update_tx_producer(txq);
-
- netif_tx_stop_queue(netdev_txq);
- txq->stopped_cnt++;
- DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
- "Stop queue was called\n");
- /* paired memory barrier is in qede_tx_int(), we have to keep
- * ordering of set_bit() in netif_tx_stop_queue() and read of
- * fp->bd_tx_cons
- */
- smp_mb();
-
- if (qed_chain_get_elem_left(&txq->tx_pbl)
- >= (MAX_SKB_FRAGS + 1) &&
- (edev->state == QEDE_STATE_OPEN)) {
- netif_tx_wake_queue(netdev_txq);
- DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
- "Wake queue was called\n");
- }
- }
-
- return NETDEV_TX_OK;
-}
-
-int qede_txq_has_work(struct qede_tx_queue *txq)
-{
- u16 hw_bd_cons;
-
- /* Tell compiler that consumer and producer can change */
- barrier();
- hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
- if (qed_chain_get_cons_idx(&txq->tx_pbl) == hw_bd_cons + 1)
- return 0;
-
- return hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl);
-}
-
-static void qede_xdp_tx_int(struct qede_dev *edev, struct qede_tx_queue *txq)
-{
- struct eth_tx_1st_bd *bd;
- u16 hw_bd_cons;
-
- hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
- barrier();
-
- while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) {
- bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
-
- dma_unmap_single(&edev->pdev->dev, BD_UNMAP_ADDR(bd),
- PAGE_SIZE, DMA_BIDIRECTIONAL);
- __free_page(txq->sw_tx_ring.pages[txq->sw_tx_cons &
- NUM_TX_BDS_MAX]);
-
- txq->sw_tx_cons++;
- txq->xmit_pkts++;
- }
-}
-
-static int qede_tx_int(struct qede_dev *edev, struct qede_tx_queue *txq)
-{
- struct netdev_queue *netdev_txq;
- u16 hw_bd_cons;
- unsigned int pkts_compl = 0, bytes_compl = 0;
- int rc;
-
- netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index);
-
- hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
- barrier();
-
- while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) {
- int len = 0;
-
- rc = qede_free_tx_pkt(edev, txq, &len);
- if (rc) {
- DP_NOTICE(edev, "hw_bd_cons = %d, chain_cons=%d\n",
- hw_bd_cons,
- qed_chain_get_cons_idx(&txq->tx_pbl));
- break;
- }
-
- bytes_compl += len;
- pkts_compl++;
- txq->sw_tx_cons++;
- txq->xmit_pkts++;
- }
-
- netdev_tx_completed_queue(netdev_txq, pkts_compl, bytes_compl);
-
- /* Need to make the tx_bd_cons update visible to start_xmit()
- * before checking for netif_tx_queue_stopped(). Without the
- * memory barrier, there is a small possibility that
- * start_xmit() will miss it and cause the queue to be stopped
- * forever.
- * On the other hand we need an rmb() here to ensure the proper
- * ordering of bit testing in the following
- * netif_tx_queue_stopped(txq) call.
- */
- smp_mb();
-
- if (unlikely(netif_tx_queue_stopped(netdev_txq))) {
- /* Taking tx_lock is needed to prevent reenabling the queue
- * while it's empty. This could have happen if rx_action() gets
- * suspended in qede_tx_int() after the condition before
- * netif_tx_wake_queue(), while tx_action (qede_start_xmit()):
- *
- * stops the queue->sees fresh tx_bd_cons->releases the queue->
- * sends some packets consuming the whole queue again->
- * stops the queue
- */
-
- __netif_tx_lock(netdev_txq, smp_processor_id());
-
- if ((netif_tx_queue_stopped(netdev_txq)) &&
- (edev->state == QEDE_STATE_OPEN) &&
- (qed_chain_get_elem_left(&txq->tx_pbl)
- >= (MAX_SKB_FRAGS + 1))) {
- netif_tx_wake_queue(netdev_txq);
- DP_VERBOSE(edev, NETIF_MSG_TX_DONE,
- "Wake queue was called\n");
- }
-
- __netif_tx_unlock(netdev_txq);
- }
-
- return 0;
-}
-
-bool qede_has_rx_work(struct qede_rx_queue *rxq)
-{
- u16 hw_comp_cons, sw_comp_cons;
-
- /* Tell compiler that status block fields can change */
- barrier();
-
- hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
- sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
-
- return hw_comp_cons != sw_comp_cons;
-}
-
-static inline void qede_rx_bd_ring_consume(struct qede_rx_queue *rxq)
-{
- qed_chain_consume(&rxq->rx_bd_ring);
- rxq->sw_rx_cons++;
-}
-
-/* This function reuses the buffer(from an offset) from
- * consumer index to producer index in the bd ring
- */
-static inline void qede_reuse_page(struct qede_rx_queue *rxq,
- struct sw_rx_data *curr_cons)
-{
- struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring);
- struct sw_rx_data *curr_prod;
- dma_addr_t new_mapping;
-
- curr_prod = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
- *curr_prod = *curr_cons;
-
- new_mapping = curr_prod->mapping + curr_prod->page_offset;
-
- rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(new_mapping));
- rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(new_mapping));
-
- rxq->sw_rx_prod++;
- curr_cons->data = NULL;
-}
-
-/* In case of allocation failures reuse buffers
- * from consumer index to produce buffers for firmware
- */
-void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, u8 count)
-{
- struct sw_rx_data *curr_cons;
-
- for (; count > 0; count--) {
- curr_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX];
- qede_reuse_page(rxq, curr_cons);
- qede_rx_bd_ring_consume(rxq);
- }
-}
-
-static int qede_alloc_rx_buffer(struct qede_rx_queue *rxq)
-{
- struct sw_rx_data *sw_rx_data;
- struct eth_rx_bd *rx_bd;
- dma_addr_t mapping;
- struct page *data;
-
- data = alloc_pages(GFP_ATOMIC, 0);
- if (unlikely(!data))
- return -ENOMEM;
-
- /* Map the entire page as it would be used
- * for multiple RX buffer segment size mapping.
- */
- mapping = dma_map_page(rxq->dev, data, 0,
- PAGE_SIZE, rxq->data_direction);
- if (unlikely(dma_mapping_error(rxq->dev, mapping))) {
- __free_page(data);
- return -ENOMEM;
- }
-
- sw_rx_data = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
- sw_rx_data->page_offset = 0;
- sw_rx_data->data = data;
- sw_rx_data->mapping = mapping;
-
- /* Advance PROD and get BD pointer */
- rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring);
- WARN_ON(!rx_bd);
- rx_bd->addr.hi = cpu_to_le32(upper_32_bits(mapping));
- rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping));
-
- rxq->sw_rx_prod++;
-
- return 0;
-}
-
-static inline int qede_realloc_rx_buffer(struct qede_rx_queue *rxq,
- struct sw_rx_data *curr_cons)
-{
- /* Move to the next segment in the page */
- curr_cons->page_offset += rxq->rx_buf_seg_size;
-
- if (curr_cons->page_offset == PAGE_SIZE) {
- if (unlikely(qede_alloc_rx_buffer(rxq))) {
- /* Since we failed to allocate new buffer
- * current buffer can be used again.
- */
- curr_cons->page_offset -= rxq->rx_buf_seg_size;
-
- return -ENOMEM;
- }
-
- dma_unmap_page(rxq->dev, curr_cons->mapping,
- PAGE_SIZE, rxq->data_direction);
- } else {
- /* Increment refcount of the page as we don't want
- * network stack to take the ownership of the page
- * which can be recycled multiple times by the driver.
- */
- page_ref_inc(curr_cons->data);
- qede_reuse_page(rxq, curr_cons);
- }
-
- return 0;
-}
-
-void qede_update_rx_prod(struct qede_dev *edev, struct qede_rx_queue *rxq)
-{
- u16 bd_prod = qed_chain_get_prod_idx(&rxq->rx_bd_ring);
- u16 cqe_prod = qed_chain_get_prod_idx(&rxq->rx_comp_ring);
- struct eth_rx_prod_data rx_prods = {0};
-
- /* Update producers */
- rx_prods.bd_prod = cpu_to_le16(bd_prod);
- rx_prods.cqe_prod = cpu_to_le16(cqe_prod);
-
- /* Make sure that the BD and SGE data is updated before updating the
- * producers since FW might read the BD/SGE right after the producer
- * is updated.
- */
- wmb();
-
- internal_ram_wr(rxq->hw_rxq_prod_addr, sizeof(rx_prods),
- (u32 *)&rx_prods);
-
- /* mmiowb is needed to synchronize doorbell writes from more than one
- * processor. It guarantees that the write arrives to the device before
- * the napi lock is released and another qede_poll is called (possibly
- * on another CPU). Without this barrier, the next doorbell can bypass
- * this doorbell. This is applicable to IA64/Altix systems.
- */
- mmiowb();
-}
-
-static void qede_get_rxhash(struct sk_buff *skb, u8 bitfields, __le32 rss_hash)
-{
- enum pkt_hash_types hash_type = PKT_HASH_TYPE_NONE;
- enum rss_hash_type htype;
- u32 hash = 0;
-
- htype = GET_FIELD(bitfields, ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE);
- if (htype) {
- hash_type = ((htype == RSS_HASH_TYPE_IPV4) ||
- (htype == RSS_HASH_TYPE_IPV6)) ?
- PKT_HASH_TYPE_L3 : PKT_HASH_TYPE_L4;
- hash = le32_to_cpu(rss_hash);
- }
- skb_set_hash(skb, hash, hash_type);
-}
-
-static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag)
-{
- skb_checksum_none_assert(skb);
-
- if (csum_flag & QEDE_CSUM_UNNECESSARY)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- if (csum_flag & QEDE_TUNN_CSUM_UNNECESSARY)
- skb->csum_level = 1;
-}
-
-static inline void qede_skb_receive(struct qede_dev *edev,
- struct qede_fastpath *fp,
- struct qede_rx_queue *rxq,
- struct sk_buff *skb, u16 vlan_tag)
-{
- if (vlan_tag)
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
-
- napi_gro_receive(&fp->napi, skb);
- fp->rxq->rcv_pkts++;
-}
-
-static void qede_set_gro_params(struct qede_dev *edev,
- struct sk_buff *skb,
- struct eth_fast_path_rx_tpa_start_cqe *cqe)
-{
- u16 parsing_flags = le16_to_cpu(cqe->pars_flags.flags);
-
- if (((parsing_flags >> PARSING_AND_ERR_FLAGS_L3TYPE_SHIFT) &
- PARSING_AND_ERR_FLAGS_L3TYPE_MASK) == 2)
- skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
- else
- skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
-
- skb_shinfo(skb)->gso_size = __le16_to_cpu(cqe->len_on_first_bd) -
- cqe->header_len;
-}
-
-static int qede_fill_frag_skb(struct qede_dev *edev,
- struct qede_rx_queue *rxq,
- u8 tpa_agg_index, u16 len_on_bd)
-{
- struct sw_rx_data *current_bd = &rxq->sw_rx_ring[rxq->sw_rx_cons &
- NUM_RX_BDS_MAX];
- struct qede_agg_info *tpa_info = &rxq->tpa_info[tpa_agg_index];
- struct sk_buff *skb = tpa_info->skb;
-
- if (unlikely(tpa_info->state != QEDE_AGG_STATE_START))
- goto out;
-
- /* Add one frag and update the appropriate fields in the skb */
- skb_fill_page_desc(skb, tpa_info->frag_id++,
- current_bd->data, current_bd->page_offset,
- len_on_bd);
-
- if (unlikely(qede_realloc_rx_buffer(rxq, current_bd))) {
- /* Incr page ref count to reuse on allocation failure
- * so that it doesn't get freed while freeing SKB.
- */
- page_ref_inc(current_bd->data);
- goto out;
- }
-
- qed_chain_consume(&rxq->rx_bd_ring);
- rxq->sw_rx_cons++;
-
- skb->data_len += len_on_bd;
- skb->truesize += rxq->rx_buf_seg_size;
- skb->len += len_on_bd;
-
- return 0;
-
-out:
- tpa_info->state = QEDE_AGG_STATE_ERROR;
- qede_recycle_rx_bd_ring(rxq, 1);
-
- return -ENOMEM;
-}
-
-static void qede_tpa_start(struct qede_dev *edev,
- struct qede_rx_queue *rxq,
- struct eth_fast_path_rx_tpa_start_cqe *cqe)
-{
- struct qede_agg_info *tpa_info = &rxq->tpa_info[cqe->tpa_agg_index];
- struct eth_rx_bd *rx_bd_cons = qed_chain_consume(&rxq->rx_bd_ring);
- struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring);
- struct sw_rx_data *replace_buf = &tpa_info->buffer;
- dma_addr_t mapping = tpa_info->buffer_mapping;
- struct sw_rx_data *sw_rx_data_cons;
- struct sw_rx_data *sw_rx_data_prod;
-
- sw_rx_data_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX];
- sw_rx_data_prod = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
-
- /* Use pre-allocated replacement buffer - we can't release the agg.
- * start until its over and we don't want to risk allocation failing
- * here, so re-allocate when aggregation will be over.
- */
- sw_rx_data_prod->mapping = replace_buf->mapping;
-
- sw_rx_data_prod->data = replace_buf->data;
- rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(mapping));
- rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(mapping));
- sw_rx_data_prod->page_offset = replace_buf->page_offset;
-
- rxq->sw_rx_prod++;
-
- /* move partial skb from cons to pool (don't unmap yet)
- * save mapping, incase we drop the packet later on.
- */
- tpa_info->buffer = *sw_rx_data_cons;
- mapping = HILO_U64(le32_to_cpu(rx_bd_cons->addr.hi),
- le32_to_cpu(rx_bd_cons->addr.lo));
-
- tpa_info->buffer_mapping = mapping;
- rxq->sw_rx_cons++;
-
- /* set tpa state to start only if we are able to allocate skb
- * for this aggregation, otherwise mark as error and aggregation will
- * be dropped
- */
- tpa_info->skb = netdev_alloc_skb(edev->ndev,
- le16_to_cpu(cqe->len_on_first_bd));
- if (unlikely(!tpa_info->skb)) {
- DP_NOTICE(edev, "Failed to allocate SKB for gro\n");
- tpa_info->state = QEDE_AGG_STATE_ERROR;
- goto cons_buf;
- }
-
- /* Start filling in the aggregation info */
- skb_put(tpa_info->skb, le16_to_cpu(cqe->len_on_first_bd));
- tpa_info->frag_id = 0;
- tpa_info->state = QEDE_AGG_STATE_START;
-
- /* Store some information from first CQE */
- tpa_info->start_cqe_placement_offset = cqe->placement_offset;
- tpa_info->start_cqe_bd_len = le16_to_cpu(cqe->len_on_first_bd);
- if ((le16_to_cpu(cqe->pars_flags.flags) >>
- PARSING_AND_ERR_FLAGS_TAG8021QEXIST_SHIFT) &
- PARSING_AND_ERR_FLAGS_TAG8021QEXIST_MASK)
- tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag);
- else
- tpa_info->vlan_tag = 0;
-
- qede_get_rxhash(tpa_info->skb, cqe->bitfields, cqe->rss_hash);
-
- /* This is needed in order to enable forwarding support */
- qede_set_gro_params(edev, tpa_info->skb, cqe);
-
-cons_buf: /* We still need to handle bd_len_list to consume buffers */
- if (likely(cqe->ext_bd_len_list[0]))
- qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index,
- le16_to_cpu(cqe->ext_bd_len_list[0]));
-
- if (unlikely(cqe->ext_bd_len_list[1])) {
- DP_ERR(edev,
- "Unlikely - got a TPA aggregation with more than one ext_bd_len_list entry in the TPA start\n");
- tpa_info->state = QEDE_AGG_STATE_ERROR;
- }
-}
-
-#ifdef CONFIG_INET
-static void qede_gro_ip_csum(struct sk_buff *skb)
-{
- const struct iphdr *iph = ip_hdr(skb);
- struct tcphdr *th;
-
- skb_set_transport_header(skb, sizeof(struct iphdr));
- th = tcp_hdr(skb);
-
- th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb),
- iph->saddr, iph->daddr, 0);
-
- tcp_gro_complete(skb);
-}
-
-static void qede_gro_ipv6_csum(struct sk_buff *skb)
-{
- struct ipv6hdr *iph = ipv6_hdr(skb);
- struct tcphdr *th;
-
- skb_set_transport_header(skb, sizeof(struct ipv6hdr));
- th = tcp_hdr(skb);
-
- th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb),
- &iph->saddr, &iph->daddr, 0);
- tcp_gro_complete(skb);
-}
-#endif
-
-static void qede_gro_receive(struct qede_dev *edev,
- struct qede_fastpath *fp,
- struct sk_buff *skb,
- u16 vlan_tag)
-{
- /* FW can send a single MTU sized packet from gro flow
- * due to aggregation timeout/last segment etc. which
- * is not expected to be a gro packet. If a skb has zero
- * frags then simply push it in the stack as non gso skb.
- */
- if (unlikely(!skb->data_len)) {
- skb_shinfo(skb)->gso_type = 0;
- skb_shinfo(skb)->gso_size = 0;
- goto send_skb;
- }
-
-#ifdef CONFIG_INET
- if (skb_shinfo(skb)->gso_size) {
- skb_reset_network_header(skb);
-
- switch (skb->protocol) {
- case htons(ETH_P_IP):
- qede_gro_ip_csum(skb);
- break;
- case htons(ETH_P_IPV6):
- qede_gro_ipv6_csum(skb);
- break;
- default:
- DP_ERR(edev,
- "Error: FW GRO supports only IPv4/IPv6, not 0x%04x\n",
- ntohs(skb->protocol));
- }
- }
-#endif
-
-send_skb:
- skb_record_rx_queue(skb, fp->rxq->rxq_id);
- qede_skb_receive(edev, fp, fp->rxq, skb, vlan_tag);
-}
-
-static inline void qede_tpa_cont(struct qede_dev *edev,
- struct qede_rx_queue *rxq,
- struct eth_fast_path_rx_tpa_cont_cqe *cqe)
-{
- int i;
-
- for (i = 0; cqe->len_list[i]; i++)
- qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index,
- le16_to_cpu(cqe->len_list[i]));
-
- if (unlikely(i > 1))
- DP_ERR(edev,
- "Strange - TPA cont with more than a single len_list entry\n");
-}
-
-static void qede_tpa_end(struct qede_dev *edev,
- struct qede_fastpath *fp,
- struct eth_fast_path_rx_tpa_end_cqe *cqe)
-{
- struct qede_rx_queue *rxq = fp->rxq;
- struct qede_agg_info *tpa_info;
- struct sk_buff *skb;
- int i;
-
- tpa_info = &rxq->tpa_info[cqe->tpa_agg_index];
- skb = tpa_info->skb;
-
- for (i = 0; cqe->len_list[i]; i++)
- qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index,
- le16_to_cpu(cqe->len_list[i]));
- if (unlikely(i > 1))
- DP_ERR(edev,
- "Strange - TPA emd with more than a single len_list entry\n");
-
- if (unlikely(tpa_info->state != QEDE_AGG_STATE_START))
- goto err;
-
- /* Sanity */
- if (unlikely(cqe->num_of_bds != tpa_info->frag_id + 1))
- DP_ERR(edev,
- "Strange - TPA had %02x BDs, but SKB has only %d frags\n",
- cqe->num_of_bds, tpa_info->frag_id);
- if (unlikely(skb->len != le16_to_cpu(cqe->total_packet_len)))
- DP_ERR(edev,
- "Strange - total packet len [cqe] is %4x but SKB has len %04x\n",
- le16_to_cpu(cqe->total_packet_len), skb->len);
-
- memcpy(skb->data,
- page_address(tpa_info->buffer.data) +
- tpa_info->start_cqe_placement_offset +
- tpa_info->buffer.page_offset, tpa_info->start_cqe_bd_len);
-
- /* Finalize the SKB */
- skb->protocol = eth_type_trans(skb, edev->ndev);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count
- * to skb_shinfo(skb)->gso_segs
- */
- NAPI_GRO_CB(skb)->count = le16_to_cpu(cqe->num_of_coalesced_segs);
-
- qede_gro_receive(edev, fp, skb, tpa_info->vlan_tag);
-
- tpa_info->state = QEDE_AGG_STATE_NONE;
-
- return;
-err:
- tpa_info->state = QEDE_AGG_STATE_NONE;
- dev_kfree_skb_any(tpa_info->skb);
- tpa_info->skb = NULL;
-}
-
-static bool qede_tunn_exist(u16 flag)
-{
- return !!(flag & (PARSING_AND_ERR_FLAGS_TUNNELEXIST_MASK <<
- PARSING_AND_ERR_FLAGS_TUNNELEXIST_SHIFT));
-}
-
-static u8 qede_check_tunn_csum(u16 flag)
-{
- u16 csum_flag = 0;
- u8 tcsum = 0;
-
- if (flag & (PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMWASCALCULATED_MASK <<
- PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMWASCALCULATED_SHIFT))
- csum_flag |= PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMERROR_MASK <<
- PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMERROR_SHIFT;
-
- if (flag & (PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK <<
- PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT)) {
- csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK <<
- PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT;
- tcsum = QEDE_TUNN_CSUM_UNNECESSARY;
- }
-
- csum_flag |= PARSING_AND_ERR_FLAGS_TUNNELIPHDRERROR_MASK <<
- PARSING_AND_ERR_FLAGS_TUNNELIPHDRERROR_SHIFT |
- PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK <<
- PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT;
-
- if (csum_flag & flag)
- return QEDE_CSUM_ERROR;
-
- return QEDE_CSUM_UNNECESSARY | tcsum;
-}
-
-static u8 qede_check_notunn_csum(u16 flag)
-{
- u16 csum_flag = 0;
- u8 csum = 0;
-
- if (flag & (PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK <<
- PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT)) {
- csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK <<
- PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT;
- csum = QEDE_CSUM_UNNECESSARY;
- }
-
- csum_flag |= PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK <<
- PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT;
-
- if (csum_flag & flag)
- return QEDE_CSUM_ERROR;
-
- return csum;
-}
-
-static u8 qede_check_csum(u16 flag)
-{
- if (!qede_tunn_exist(flag))
- return qede_check_notunn_csum(flag);
- else
- return qede_check_tunn_csum(flag);
-}
-
-static bool qede_pkt_is_ip_fragmented(struct eth_fast_path_rx_reg_cqe *cqe,
- u16 flag)
-{
- u8 tun_pars_flg = cqe->tunnel_pars_flags.flags;
-
- if ((tun_pars_flg & (ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_MASK <<
- ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_SHIFT)) ||
- (flag & (PARSING_AND_ERR_FLAGS_IPV4FRAG_MASK <<
- PARSING_AND_ERR_FLAGS_IPV4FRAG_SHIFT)))
- return true;
-
- return false;
-}
-
-/* Return true iff packet is to be passed to stack */
-static bool qede_rx_xdp(struct qede_dev *edev,
- struct qede_fastpath *fp,
- struct qede_rx_queue *rxq,
- struct bpf_prog *prog,
- struct sw_rx_data *bd,
- struct eth_fast_path_rx_reg_cqe *cqe)
-{
- u16 len = le16_to_cpu(cqe->len_on_first_bd);
- struct xdp_buff xdp;
- enum xdp_action act;
-
- xdp.data = page_address(bd->data) + cqe->placement_offset;
- xdp.data_end = xdp.data + len;
-
- /* Queues always have a full reset currently, so for the time
- * being until there's atomic program replace just mark read
- * side for map helpers.
- */
- rcu_read_lock();
- act = bpf_prog_run_xdp(prog, &xdp);
- rcu_read_unlock();
-
- if (act == XDP_PASS)
- return true;
-
- /* Count number of packets not to be passed to stack */
- rxq->xdp_no_pass++;
-
- switch (act) {
- case XDP_TX:
- /* We need the replacement buffer before transmit. */
- if (qede_alloc_rx_buffer(rxq)) {
- qede_recycle_rx_bd_ring(rxq, 1);
- return false;
- }
-
- /* Now if there's a transmission problem, we'd still have to
- * throw current buffer, as replacement was already allocated.
- */
- if (qede_xdp_xmit(edev, fp, bd, cqe->placement_offset, len)) {
- dma_unmap_page(rxq->dev, bd->mapping,
- PAGE_SIZE, DMA_BIDIRECTIONAL);
- __free_page(bd->data);
- }
-
- /* Regardless, we've consumed an Rx BD */
- qede_rx_bd_ring_consume(rxq);
- return false;
-
- default:
- bpf_warn_invalid_xdp_action(act);
- case XDP_ABORTED:
- case XDP_DROP:
- qede_recycle_rx_bd_ring(rxq, cqe->bd_num);
- }
-
- return false;
-}
-
-static struct sk_buff *qede_rx_allocate_skb(struct qede_dev *edev,
- struct qede_rx_queue *rxq,
- struct sw_rx_data *bd, u16 len,
- u16 pad)
-{
- unsigned int offset = bd->page_offset;
- struct skb_frag_struct *frag;
- struct page *page = bd->data;
- unsigned int pull_len;
- struct sk_buff *skb;
- unsigned char *va;
-
- /* Allocate a new SKB with a sufficient large header len */
- skb = netdev_alloc_skb(edev->ndev, QEDE_RX_HDR_SIZE);
- if (unlikely(!skb))
- return NULL;
-
- /* Copy data into SKB - if it's small, we can simply copy it and
- * re-use the already allcoated & mapped memory.
- */
- if (len + pad <= edev->rx_copybreak) {
- memcpy(skb_put(skb, len),
- page_address(page) + pad + offset, len);
- qede_reuse_page(rxq, bd);
- goto out;
- }
-
- frag = &skb_shinfo(skb)->frags[0];
-
- skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
- page, pad + offset, len, rxq->rx_buf_seg_size);
-
- va = skb_frag_address(frag);
- pull_len = eth_get_headlen(va, QEDE_RX_HDR_SIZE);
-
- /* Align the pull_len to optimize memcpy */
- memcpy(skb->data, va, ALIGN(pull_len, sizeof(long)));
-
- /* Correct the skb & frag sizes offset after the pull */
- skb_frag_size_sub(frag, pull_len);
- frag->page_offset += pull_len;
- skb->data_len -= pull_len;
- skb->tail += pull_len;
-
- if (unlikely(qede_realloc_rx_buffer(rxq, bd))) {
- /* Incr page ref count to reuse on allocation failure so
- * that it doesn't get freed while freeing SKB [as its
- * already mapped there].
- */
- page_ref_inc(page);
- dev_kfree_skb_any(skb);
- return NULL;
- }
-
-out:
- /* We've consumed the first BD and prepared an SKB */
- qede_rx_bd_ring_consume(rxq);
- return skb;
-}
-
-static int qede_rx_build_jumbo(struct qede_dev *edev,
- struct qede_rx_queue *rxq,
- struct sk_buff *skb,
- struct eth_fast_path_rx_reg_cqe *cqe,
- u16 first_bd_len)
-{
- u16 pkt_len = le16_to_cpu(cqe->pkt_len);
- struct sw_rx_data *bd;
- u16 bd_cons_idx;
- u8 num_frags;
-
- pkt_len -= first_bd_len;
-
- /* We've already used one BD for the SKB. Now take care of the rest */
- for (num_frags = cqe->bd_num - 1; num_frags > 0; num_frags--) {
- u16 cur_size = pkt_len > rxq->rx_buf_size ? rxq->rx_buf_size :
- pkt_len;
-
- if (unlikely(!cur_size)) {
- DP_ERR(edev,
- "Still got %d BDs for mapping jumbo, but length became 0\n",
- num_frags);
- goto out;
- }
-
- /* We need a replacement buffer for each BD */
- if (unlikely(qede_alloc_rx_buffer(rxq)))
- goto out;
-
- /* Now that we've allocated the replacement buffer,
- * we can safely consume the next BD and map it to the SKB.
- */
- bd_cons_idx = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
- bd = &rxq->sw_rx_ring[bd_cons_idx];
- qede_rx_bd_ring_consume(rxq);
-
- dma_unmap_page(rxq->dev, bd->mapping,
- PAGE_SIZE, DMA_FROM_DEVICE);
-
- skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags++,
- bd->data, 0, cur_size);
-
- skb->truesize += PAGE_SIZE;
- skb->data_len += cur_size;
- skb->len += cur_size;
- pkt_len -= cur_size;
- }
-
- if (unlikely(pkt_len))
- DP_ERR(edev,
- "Mapped all BDs of jumbo, but still have %d bytes\n",
- pkt_len);
-
-out:
- return num_frags;
-}
-
-static int qede_rx_process_tpa_cqe(struct qede_dev *edev,
- struct qede_fastpath *fp,
- struct qede_rx_queue *rxq,
- union eth_rx_cqe *cqe,
- enum eth_rx_cqe_type type)
-{
- switch (type) {
- case ETH_RX_CQE_TYPE_TPA_START:
- qede_tpa_start(edev, rxq, &cqe->fast_path_tpa_start);
- return 0;
- case ETH_RX_CQE_TYPE_TPA_CONT:
- qede_tpa_cont(edev, rxq, &cqe->fast_path_tpa_cont);
- return 0;
- case ETH_RX_CQE_TYPE_TPA_END:
- qede_tpa_end(edev, fp, &cqe->fast_path_tpa_end);
- return 1;
- default:
- return 0;
- }
-}
-
-static int qede_rx_process_cqe(struct qede_dev *edev,
- struct qede_fastpath *fp,
- struct qede_rx_queue *rxq)
-{
- struct bpf_prog *xdp_prog = READ_ONCE(rxq->xdp_prog);
- struct eth_fast_path_rx_reg_cqe *fp_cqe;
- u16 len, pad, bd_cons_idx, parse_flag;
- enum eth_rx_cqe_type cqe_type;
- union eth_rx_cqe *cqe;
- struct sw_rx_data *bd;
- struct sk_buff *skb;
- __le16 flags;
- u8 csum_flag;
-
- /* Get the CQE from the completion ring */
- cqe = (union eth_rx_cqe *)qed_chain_consume(&rxq->rx_comp_ring);
- cqe_type = cqe->fast_path_regular.type;
-
- /* Process an unlikely slowpath event */
- if (unlikely(cqe_type == ETH_RX_CQE_TYPE_SLOW_PATH)) {
- struct eth_slow_path_rx_cqe *sp_cqe;
-
- sp_cqe = (struct eth_slow_path_rx_cqe *)cqe;
- edev->ops->eth_cqe_completion(edev->cdev, fp->id, sp_cqe);
- return 0;
- }
-
- /* Handle TPA cqes */
- if (cqe_type != ETH_RX_CQE_TYPE_REGULAR)
- return qede_rx_process_tpa_cqe(edev, fp, rxq, cqe, cqe_type);
-
- /* Get the data from the SW ring; Consume it only after it's evident
- * we wouldn't recycle it.
- */
- bd_cons_idx = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
- bd = &rxq->sw_rx_ring[bd_cons_idx];
-
- fp_cqe = &cqe->fast_path_regular;
- len = le16_to_cpu(fp_cqe->len_on_first_bd);
- pad = fp_cqe->placement_offset;
-
- /* Run eBPF program if one is attached */
- if (xdp_prog)
- if (!qede_rx_xdp(edev, fp, rxq, xdp_prog, bd, fp_cqe))
- return 1;
-
- /* If this is an error packet then drop it */
- flags = cqe->fast_path_regular.pars_flags.flags;
- parse_flag = le16_to_cpu(flags);
-
- csum_flag = qede_check_csum(parse_flag);
- if (unlikely(csum_flag == QEDE_CSUM_ERROR)) {
- if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) {
- rxq->rx_ip_frags++;
- } else {
- DP_NOTICE(edev,
- "CQE has error, flags = %x, dropping incoming packet\n",
- parse_flag);
- rxq->rx_hw_errors++;
- qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num);
- return 0;
- }
- }
-
- /* Basic validation passed; Need to prepare an SKB. This would also
- * guarantee to finally consume the first BD upon success.
- */
- skb = qede_rx_allocate_skb(edev, rxq, bd, len, pad);
- if (!skb) {
- rxq->rx_alloc_errors++;
- qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num);
- return 0;
- }
-
- /* In case of Jumbo packet, several PAGE_SIZEd buffers will be pointed
- * by a single cqe.
- */
- if (fp_cqe->bd_num > 1) {
- u16 unmapped_frags = qede_rx_build_jumbo(edev, rxq, skb,
- fp_cqe, len);
-
- if (unlikely(unmapped_frags > 0)) {
- qede_recycle_rx_bd_ring(rxq, unmapped_frags);
- dev_kfree_skb_any(skb);
- return 0;
- }
- }
-
- /* The SKB contains all the data. Now prepare meta-magic */
- skb->protocol = eth_type_trans(skb, edev->ndev);
- qede_get_rxhash(skb, fp_cqe->bitfields, fp_cqe->rss_hash);
- qede_set_skb_csum(skb, csum_flag);
- skb_record_rx_queue(skb, rxq->rxq_id);
-
- /* SKB is prepared - pass it to stack */
- qede_skb_receive(edev, fp, rxq, skb, le16_to_cpu(fp_cqe->vlan_tag));
-
- return 1;
-}
-
-static int qede_rx_int(struct qede_fastpath *fp, int budget)
-{
- struct qede_rx_queue *rxq = fp->rxq;
- struct qede_dev *edev = fp->edev;
- u16 hw_comp_cons, sw_comp_cons;
- int work_done = 0;
-
- hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
- sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
-
- /* Memory barrier to prevent the CPU from doing speculative reads of CQE
- * / BD in the while-loop before reading hw_comp_cons. If the CQE is
- * read before it is written by FW, then FW writes CQE and SB, and then
- * the CPU reads the hw_comp_cons, it will use an old CQE.
- */
- rmb();
-
- /* Loop to complete all indicated BDs */
- while ((sw_comp_cons != hw_comp_cons) && (work_done < budget)) {
- qede_rx_process_cqe(edev, fp, rxq);
- qed_chain_recycle_consumed(&rxq->rx_comp_ring);
- sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
- work_done++;
- }
-
- /* Update producers */
- qede_update_rx_prod(edev, rxq);
-
- return work_done;
-}
-
-static bool qede_poll_is_more_work(struct qede_fastpath *fp)
-{
- qed_sb_update_sb_idx(fp->sb_info);
-
- /* *_has_*_work() reads the status block, thus we need to ensure that
- * status block indices have been actually read (qed_sb_update_sb_idx)
- * prior to this check (*_has_*_work) so that we won't write the
- * "newer" value of the status block to HW (if there was a DMA right
- * after qede_has_rx_work and if there is no rmb, the memory reading
- * (qed_sb_update_sb_idx) may be postponed to right before *_ack_sb).
- * In this case there will never be another interrupt until there is
- * another update of the status block, while there is still unhandled
- * work.
- */
- rmb();
-
- if (likely(fp->type & QEDE_FASTPATH_RX))
- if (qede_has_rx_work(fp->rxq))
- return true;
-
- if (fp->type & QEDE_FASTPATH_XDP)
- if (qede_txq_has_work(fp->xdp_tx))
- return true;
-
- if (likely(fp->type & QEDE_FASTPATH_TX))
- if (qede_txq_has_work(fp->txq))
- return true;
-
- return false;
-}
-
-static int qede_poll(struct napi_struct *napi, int budget)
-{
- struct qede_fastpath *fp = container_of(napi, struct qede_fastpath,
- napi);
- struct qede_dev *edev = fp->edev;
- int rx_work_done = 0;
-
- if (likely(fp->type & QEDE_FASTPATH_TX) && qede_txq_has_work(fp->txq))
- qede_tx_int(edev, fp->txq);
-
- if ((fp->type & QEDE_FASTPATH_XDP) && qede_txq_has_work(fp->xdp_tx))
- qede_xdp_tx_int(edev, fp->xdp_tx);
-
- rx_work_done = (likely(fp->type & QEDE_FASTPATH_RX) &&
- qede_has_rx_work(fp->rxq)) ?
- qede_rx_int(fp, budget) : 0;
- if (rx_work_done < budget) {
- if (!qede_poll_is_more_work(fp)) {
- napi_complete(napi);
-
- /* Update and reenable interrupts */
- qed_sb_ack(fp->sb_info, IGU_INT_ENABLE, 1);
- } else {
- rx_work_done = budget;
- }
- }
-
- if (fp->xdp_xmit) {
- u16 xdp_prod = qed_chain_get_prod_idx(&fp->xdp_tx->tx_pbl);
-
- fp->xdp_xmit = 0;
- fp->xdp_tx->tx_db.data.bd_prod = cpu_to_le16(xdp_prod);
- qede_update_tx_producer(fp->xdp_tx);
- }
-
- return rx_work_done;
-}
-
-static irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie)
-{
- struct qede_fastpath *fp = fp_cookie;
-
- qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/);
-
- napi_schedule_irqoff(&fp->napi);
- return IRQ_HANDLED;
-}
-
-/* -------------------------------------------------------------------------
- * END OF FAST-PATH
- * -------------------------------------------------------------------------
- */
-
static int qede_open(struct net_device *ndev);
static int qede_close(struct net_device *ndev);
static int qede_set_mac_addr(struct net_device *ndev, void *p);
@@ -2482,40 +880,6 @@ static void qede_udp_tunnel_del(struct net_device *dev,
schedule_delayed_work(&edev->sp_task, 0);
}
-/* 8B udp header + 8B base tunnel header + 32B option length */
-#define QEDE_MAX_TUN_HDR_LEN 48
-
-static netdev_features_t qede_features_check(struct sk_buff *skb,
- struct net_device *dev,
- netdev_features_t features)
-{
- if (skb->encapsulation) {
- u8 l4_proto = 0;
-
- switch (vlan_get_protocol(skb)) {
- case htons(ETH_P_IP):
- l4_proto = ip_hdr(skb)->protocol;
- break;
- case htons(ETH_P_IPV6):
- l4_proto = ipv6_hdr(skb)->nexthdr;
- break;
- default:
- return features;
- }
-
- /* Disable offloads for geneve tunnels, as HW can't parse
- * the geneve header which has option length greater than 32B.
- */
- if ((l4_proto == IPPROTO_UDP) &&
- ((skb_inner_mac_header(skb) -
- skb_transport_header(skb)) > QEDE_MAX_TUN_HDR_LEN))
- return features & ~(NETIF_F_CSUM_MASK |
- NETIF_F_GSO_MASK);
- }
-
- return features;
-}
-
static void qede_xdp_reload_func(struct qede_dev *edev,
struct qede_reload_args *args)
{
--
1.9.3
^ permalink raw reply related
* [PATCH net-next 01/12] qed*: Update to dual-license
From: Yuval Mintz @ 2017-01-01 11:57 UTC (permalink / raw)
To: davem, netdev; +Cc: Yuval Mintz
In-Reply-To: <1483271831-25890-1-git-send-email-Yuval.Mintz@cavium.com>
Since the submission of the qedr driver, there's inconsistency
in the licensing of the various qed/qede files - some are GPLv2
and some are dual-license.
Since qedr requires dual-license and it's dependent on both,
we're updating the licensing of all qed/qede source files.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_cxt.h | 34 +++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_dcbx.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_dev.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_dev_api.h | 34 +++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_hw.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_hw.h | 32 ++++++++++++++++---
.../net/ethernet/qlogic/qed/qed_init_fw_funcs.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_init_ops.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_init_ops.h | 34 +++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_int.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_int.h | 34 +++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_iscsi.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_l2.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_l2.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 31 +++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_ll2.h | 31 +++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_main.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_mcp.h | 34 +++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_ooo.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_ooo.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_roce.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_roce.h | 2 +-
drivers/net/ethernet/qlogic/qed/qed_selftest.c | 32 +++++++++++++++++++
drivers/net/ethernet/qlogic/qed/qed_sp.h | 34 +++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_spq.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_vf.c | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qed/qed_vf.h | 32 ++++++++++++++++---
drivers/net/ethernet/qlogic/qede/qede.h | 37 ++++++++++++++++++----
drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 37 ++++++++++++++++++----
drivers/net/ethernet/qlogic/qede/qede_main.c | 37 ++++++++++++++++++----
drivers/net/ethernet/qlogic/qede/qede_roce.c | 2 +-
include/linux/qed/common_hsi.h | 33 ++++++++++++++++---
include/linux/qed/eth_common.h | 32 ++++++++++++++++---
include/linux/qed/iscsi_common.h | 32 ++++++++++++++++---
include/linux/qed/qed_chain.h | 34 +++++++++++++++++---
include/linux/qed/qed_eth_if.h | 32 ++++++++++++++++---
include/linux/qed/qed_if.h | 35 ++++++++++++++++----
include/linux/qed/qed_iov_if.h | 32 ++++++++++++++++---
include/linux/qed/qed_iscsi_if.h | 32 ++++++++++++++++---
include/linux/qed/qed_ll2_if.h | 31 +++++++++++++++---
include/linux/qed/qed_roce_if.h | 2 +-
include/linux/qed/qede_roce.h | 2 +-
include/linux/qed/rdma_common.h | 32 ++++++++++++++++---
include/linux/qed/roce_common.h | 32 ++++++++++++++++---
include/linux/qed/storage_common.h | 32 ++++++++++++++++---
include/linux/qed/tcp_common.h | 32 ++++++++++++++++---
56 files changed, 1449 insertions(+), 223 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index 44c184e..f6e0ff4 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index 0c42c24..dcb8fc1 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.h b/drivers/net/ethernet/qlogic/qed/qed_cxt.h
index 2b8bdaa..98f4973 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_CXT_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
index a4789a9..dc0d2c9 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.h b/drivers/net/ethernet/qlogic/qed/qed_dcbx.h
index 9ba6816..d70300f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_DCBX_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 3b22500..33e7201 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev_api.h b/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
index b6711c1..5d37ba2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev_api.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_DEV_API_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
index 785ab03..5d31189 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_HSI_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_hw.c b/drivers/net/ethernet/qlogic/qed/qed_hw.c
index 6e4fae9..1f60651 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hw.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_hw.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_hw.h b/drivers/net/ethernet/qlogic/qed/qed_hw.h
index d015570..9277264 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hw.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hw.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_HW_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c b/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c
index 23e455f..d891a68 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_init_ops.c b/drivers/net/ethernet/qlogic/qed/qed_init_ops.c
index d567ba9..243b64e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_init_ops.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_init_ops.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_init_ops.h b/drivers/net/ethernet/qlogic/qed/qed_init_ops.h
index 1e83204..555dd08 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_init_ops.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_init_ops.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_INIT_OPS_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index c68dbf7..84310b6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
index 0948be6..0ae0bb4 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_INT_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
index 17a7012..3a44d6b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iscsi.h b/drivers/net/ethernet/qlogic/qed/qed_iscsi.h
index 67c25f3..20c187f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iscsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_iscsi.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_ISCSI_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 6a3727c..fd153d2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h
index 48c9bfc..2f03037 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_L2_H
#define _QED_L2_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index 8e5cb76..05e32f4 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -1,10 +1,33 @@
/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * Copyright (c) 2015 QLogic Corporation
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.h b/drivers/net/ethernet/qlogic/qed/qed_ll2.h
index 6625a3a..c7f2975 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.h
@@ -1,10 +1,33 @@
/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * Copyright (c) 2015 QLogic Corporation
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_LL2_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index aeb98d8..e156842 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/stddef.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 6dd3ce4..2566741 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
index 407a2c1..363dce0 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_MCP_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ooo.c b/drivers/net/ethernet/qlogic/qed/qed_ooo.c
index 155abcb..7d731c6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ooo.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ooo.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ooo.h b/drivers/net/ethernet/qlogic/qed/qed_ooo.h
index 7a0670a..4f138fb 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ooo.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_ooo.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_OOO_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h
index 9754420..b6722c6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef REG_ADDR_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 2a16547..bd4cad2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -1,5 +1,5 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015-2016 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.h b/drivers/net/ethernet/qlogic/qed/qed_roce.h
index 279f342..36cf4b2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.h
@@ -1,5 +1,5 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015-2016 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/ethernet/qlogic/qed/qed_selftest.c b/drivers/net/ethernet/qlogic/qed/qed_selftest.c
index 48bfaec..1bafc05 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_selftest.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_selftest.c
@@ -1,3 +1,35 @@
+/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2016 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
#include <linux/crc32.h>
#include "qed.h"
#include "qed_dev_api.h"
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index 9c897bc..0438829 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_SP_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
index a39ef2e..097a729 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index f022469..645328a 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/types.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 85b09dd..469e857f5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/etherdevice.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.h b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
index 509c02b..1738d5b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_SRIOV_H
diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index 60b31a8..af0542c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#include <linux/crc32.h>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.h b/drivers/net/ethernet/qlogic/qed/qed_vf.h
index 11eb385..7da0b16 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_VF_H
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index c79dc787..b2c6cc9 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -1,11 +1,34 @@
/* QLogic qede NIC Driver
-* Copyright (c) 2015 QLogic Corporation
-*
-* This software is available under the terms of the GNU General Public License
-* (GPL) Version 2, available from the file COPYING in the main directory of
-* this source tree.
-*/
-
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
#ifndef _QEDE_H_
#define _QEDE_H_
#include <linux/compiler.h>
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
index 1c48f44..8e971b2 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
@@ -1,11 +1,34 @@
/* QLogic qede NIC Driver
-* Copyright (c) 2015 QLogic Corporation
-*
-* This software is available under the terms of the GNU General Public License
-* (GPL) Version 2, available from the file COPYING in the main directory of
-* this source tree.
-*/
-
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
#include <linux/version.h>
#include <linux/types.h>
#include <linux/netdevice.h>
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index aecdd1c..0851fe3 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1,11 +1,34 @@
/* QLogic qede NIC Driver
-* Copyright (c) 2015 QLogic Corporation
-*
-* This software is available under the terms of the GNU General Public License
-* (GPL) Version 2, available from the file COPYING in the main directory of
-* this source tree.
-*/
-
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/version.h>
diff --git a/drivers/net/ethernet/qlogic/qede/qede_roce.c b/drivers/net/ethernet/qlogic/qede/qede_roce.c
index 4927271..f00657c 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_roce.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_roce.c
@@ -1,5 +1,5 @@
/* QLogic qedr NIC Driver
- * Copyright (c) 2015-2016 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/include/linux/qed/common_hsi.h b/include/linux/qed/common_hsi.h
index 734deb0..c33080b 100644
--- a/include/linux/qed/common_hsi.h
+++ b/include/linux/qed/common_hsi.h
@@ -1,10 +1,35 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2016 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
+
#ifndef _COMMON_HSI_H
#define _COMMON_HSI_H
#include <linux/types.h>
diff --git a/include/linux/qed/eth_common.h b/include/linux/qed/eth_common.h
index 1aa0727..4b402fb 100644
--- a/include/linux/qed/eth_common.h
+++ b/include/linux/qed/eth_common.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef __ETH_COMMON__
diff --git a/include/linux/qed/iscsi_common.h b/include/linux/qed/iscsi_common.h
index 8f64b12..4c5747b 100644
--- a/include/linux/qed/iscsi_common.h
+++ b/include/linux/qed/iscsi_common.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef __ISCSI_COMMON__
diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h
index 37dfba1..5cd7a46 100644
--- a/include/linux/qed/qed_chain.h
+++ b/include/linux/qed/qed_chain.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_CHAIN_H
diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h
index 7a52f7c..d91651e 100644
--- a/include/linux/qed/qed_eth_if.h
+++ b/include/linux/qed/qed_eth_if.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_ETH_IF_H
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h
index 4b454f4..d1576a2 100644
--- a/include/linux/qed/qed_if.h
+++ b/include/linux/qed/qed_if.h
@@ -1,10 +1,33 @@
/* QLogic qed NIC Driver
- *
- * Copyright (c) 2015 QLogic Corporation
- *
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Copyright (c) 2015-2017 QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_IF_H
diff --git a/include/linux/qed/qed_iov_if.h b/include/linux/qed/qed_iov_if.h
index 5a4f8d0..b1f9791 100644
--- a/include/linux/qed/qed_iov_if.h
+++ b/include/linux/qed/qed_iov_if.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_IOV_IF_H
diff --git a/include/linux/qed/qed_iscsi_if.h b/include/linux/qed/qed_iscsi_if.h
index d279124..f70bb81 100644
--- a/include/linux/qed/qed_iscsi_if.h
+++ b/include/linux/qed/qed_iscsi_if.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_ISCSI_IF_H
diff --git a/include/linux/qed/qed_ll2_if.h b/include/linux/qed/qed_ll2_if.h
index fd75c26..4fb4666 100644
--- a/include/linux/qed/qed_ll2_if.h
+++ b/include/linux/qed/qed_ll2_if.h
@@ -1,10 +1,33 @@
/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * Copyright (c) 2015 QLogic Corporation
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef _QED_LL2_IF_H
diff --git a/include/linux/qed/qed_roce_if.h b/include/linux/qed/qed_roce_if.h
index 53047d3..f742d43 100644
--- a/include/linux/qed/qed_roce_if.h
+++ b/include/linux/qed/qed_roce_if.h
@@ -1,5 +1,5 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015-2016 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/include/linux/qed/qede_roce.h b/include/linux/qed/qede_roce.h
index f48d64b..3b8dd55 100644
--- a/include/linux/qed/qede_roce.h
+++ b/include/linux/qed/qede_roce.h
@@ -1,5 +1,5 @@
/* QLogic qedr NIC Driver
- * Copyright (c) 2015-2016 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/include/linux/qed/rdma_common.h b/include/linux/qed/rdma_common.h
index 7663725..f773aa5 100644
--- a/include/linux/qed/rdma_common.h
+++ b/include/linux/qed/rdma_common.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef __RDMA_COMMON__
diff --git a/include/linux/qed/roce_common.h b/include/linux/qed/roce_common.h
index 2eeaf3d..bad02df 100644
--- a/include/linux/qed/roce_common.h
+++ b/include/linux/qed/roce_common.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef __ROCE_COMMON__
diff --git a/include/linux/qed/storage_common.h b/include/linux/qed/storage_common.h
index 3b8e1ef..03f3e37 100644
--- a/include/linux/qed/storage_common.h
+++ b/include/linux/qed/storage_common.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef __STORAGE_COMMON__
diff --git a/include/linux/qed/tcp_common.h b/include/linux/qed/tcp_common.h
index dc3889d..46fe785 100644
--- a/include/linux/qed/tcp_common.h
+++ b/include/linux/qed/tcp_common.h
@@ -1,9 +1,33 @@
/* QLogic qed NIC Driver
- * Copyright (c) 2015 QLogic Corporation
+ * Copyright (c) 2015-2017 QLogic Corporation
*
- * This software is available under the terms of the GNU General Public License
- * (GPL) Version 2, available from the file COPYING in the main directory of
- * this source tree.
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and /or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
*/
#ifndef __TCP_COMMON__
--
1.9.3
^ permalink raw reply related
* [PATCH net-next 00/12] qed*: Driver updates
From: Yuval Mintz @ 2017-01-01 11:56 UTC (permalink / raw)
To: davem, netdev; +Cc: Yuval Mintz
The more interesting changes in this series include:
- Restructuring of the qede files - qede_main.c has grown big and this
series splits it into 3 parts [patches #2 and #3].
- Some significant changes in the API through which RSS indirection
table gets configured [#8].
- Support for ndo_set_vf_trust() [#9] which would regulate which VFs
are allowed to use promisc/multi-promisc mode.
It also contains various minor changes to qed/qede, as well as
non-functional changes [#1, #12] to complement other changes.
Hi Dave,
Please consider applying this series to `net-next'.
Thanks,
Yuval
Manish Chopra (1):
qede - mark SKB as encapsulated
Ram Amrani (1):
qed: conserve qed RDMA resources when !QEDR
Yuval Mintz (10):
qed*: Update to dual-license
qede: Break datapath logic into its own file
qede: Split filtering logic to its own file
qed*: Change maximal number of queues
qede: Postpone reallocation until NAPI end
qede: Remove unnecessary datapath dereference
qed*: RSS indirection based on queue-handles
qed*: Add support for ndo_set_vf_trust
qed: Support Multicast on Tx-switching
qed*: Advance driver version to 8.10.10.20.
drivers/net/ethernet/qlogic/qed/qed.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_cxt.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_dcbx.h | 32 +-
drivers/net/ethernet/qlogic/qed/qed_dev.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_dev_api.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 32 +-
drivers/net/ethernet/qlogic/qed/qed_hw.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_hw.h | 32 +-
.../net/ethernet/qlogic/qed/qed_init_fw_funcs.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_init_ops.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_init_ops.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_int.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_int.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_iscsi.h | 32 +-
drivers/net/ethernet/qlogic/qed/qed_l2.c | 303 ++-
drivers/net/ethernet/qlogic/qed/qed_l2.h | 60 +-
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 31 +-
drivers/net/ethernet/qlogic/qed/qed_ll2.h | 31 +-
drivers/net/ethernet/qlogic/qed/qed_main.c | 43 +-
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 36 +-
drivers/net/ethernet/qlogic/qed/qed_mcp.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_ooo.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_ooo.h | 32 +-
drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 32 +-
drivers/net/ethernet/qlogic/qed/qed_roce.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_roce.h | 2 +-
drivers/net/ethernet/qlogic/qed/qed_selftest.c | 32 +
drivers/net/ethernet/qlogic/qed/qed_sp.h | 34 +-
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_spq.c | 32 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 242 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 41 +-
drivers/net/ethernet/qlogic/qed/qed_vf.c | 44 +-
drivers/net/ethernet/qlogic/qed/qed_vf.h | 32 +-
drivers/net/ethernet/qlogic/qede/Makefile | 2 +-
drivers/net/ethernet/qlogic/qede/qede.h | 83 +-
drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 114 +-
drivers/net/ethernet/qlogic/qede/qede_filter.c | 759 ++++++
drivers/net/ethernet/qlogic/qede/qede_fp.c | 1691 +++++++++++++
drivers/net/ethernet/qlogic/qede/qede_main.c | 2617 ++------------------
drivers/net/ethernet/qlogic/qede/qede_roce.c | 2 +-
include/linux/qed/common_hsi.h | 33 +-
include/linux/qed/eth_common.h | 32 +-
include/linux/qed/iscsi_common.h | 32 +-
include/linux/qed/qed_chain.h | 34 +-
include/linux/qed/qed_eth_if.h | 34 +-
include/linux/qed/qed_if.h | 35 +-
include/linux/qed/qed_iov_if.h | 34 +-
include/linux/qed/qed_iscsi_if.h | 32 +-
include/linux/qed/qed_ll2_if.h | 31 +-
include/linux/qed/qed_roce_if.h | 2 +-
include/linux/qed/qede_roce.h | 2 +-
include/linux/qed/rdma_common.h | 32 +-
include/linux/qed/roce_common.h | 32 +-
include/linux/qed/storage_common.h | 32 +-
include/linux/qed/tcp_common.h | 32 +-
59 files changed, 4522 insertions(+), 2856 deletions(-)
create mode 100644 drivers/net/ethernet/qlogic/qede/qede_filter.c
create mode 100644 drivers/net/ethernet/qlogic/qede/qede_fp.c
--
1.9.3
^ permalink raw reply
* Re: [PATCH net-next 00/27] sctp: implement rfc6525 sctp stream reconf
From: Xin Long @ 2017-01-01 11:32 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3101 bytes --]
On Sun, Jan 1, 2017 at 7:20 PM, Xin Long <lucien.xin@gmail.com> wrote:
> This patchset is to implement sctp stream reconf described in rfc6525.
>
> Patch 1-3 add per stream information in sctp asoc.
> Patch 4-8 make the chunk with different reconf params. (Section 3-4)
> Patch 9-12 add reconf timer, primitive and enable option.
> Patch 13-25 implement the procedures on both sender and receiver sides (Section 5)
> add sockopts and event for users (Section 6)
> Patch 26-27 add reconf event, activate the sctp stream reconf process.
>
Attachments are the scripts I used to do tests for this patchset.
including the scripts on bsd side when doing some interactivity
tests with bsd.
> Xin Long (27):
> sctp: add stream arrays in asoc
> sctp: replace ssnmap with asoc stream arrays
> sctp: remove asoc ssnmap and ssnmap.c
> sctp: add rfc6525 section 3.1
> sctp: add rfc6525 section 4.1-4.2
> sctp: add rfc6525 section 4.3
> sctp: add rfc6525 section 4.4
> sctp: add rfc6525 section 4.5-4.6
> sctp: add stream reconf timer
> sctp: add stream reconf primitive
> sctp: add reconf_enable in asoc ep and netns
> sctp: add get and set sockopt for reconf_enable
> sctp: add rfc6525 section 6.3.1
> sctp: add rfc6525 section 5.1.2-5.1.3 and 6.3.2
> sctp: add rfc6525 section 5.1.4 and 6.3.3
> sctp: add rfc6525 section 5.1.5-5.1.6 and 6.3.4
> sctp: add rfc6525 section 6.1.1
> sctp: add rfc6525 section 6.1.2
> sctp: add rfc6525 section 6.1.3
> sctp: add rfc6525 section 5.2.2
> sctp: add rfc6525 section 5.2.3
> sctp: add rfc6525 section 5.2.4
> sctp: add rfc6525 section 5.2.5
> sctp: add rfc6525 section 5.2.6
> sctp: add rfc6525 section 5.2.7
> sctp: add sctp reconf chunk process
> sctp: add reconf chunk event
>
> include/linux/sctp.h | 68 ++++++
> include/net/netns/sctp.h | 3 +
> include/net/sctp/constants.h | 7 +-
> include/net/sctp/sctp.h | 3 +-
> include/net/sctp/sm.h | 54 ++++-
> include/net/sctp/structs.h | 91 ++++---
> include/net/sctp/ulpevent.h | 12 +
> include/uapi/linux/sctp.h | 93 ++++++-
> net/sctp/Makefile | 4 +-
> net/sctp/associola.c | 29 ++-
> net/sctp/endpointola.c | 1 +
> net/sctp/objcnt.c | 2 -
> net/sctp/outqueue.c | 33 ++-
> net/sctp/primitive.c | 3 +
> net/sctp/sm_make_chunk.c | 403 ++++++++++++++++++++++++++++++-
> net/sctp/sm_sideeffect.c | 32 +++
> net/sctp/sm_statefuns.c | 112 ++++++++-
> net/sctp/sm_statetable.c | 70 ++++++
> net/sctp/socket.c | 433 +++++++++++++++++++++++++++++++++
> net/sctp/ssnmap.c | 125 ----------
> net/sctp/stream.c | 563 +++++++++++++++++++++++++++++++++++++++++++
> net/sctp/sysctl.c | 7 +
> net/sctp/transport.c | 17 +-
> net/sctp/ulpevent.c | 86 +++++++
> net/sctp/ulpqueue.c | 33 +--
> 25 files changed, 2043 insertions(+), 241 deletions(-)
> delete mode 100644 net/sctp/ssnmap.c
> create mode 100644 net/sctp/stream.c
>
> --
> 2.1.0
>
[-- Attachment #2: reconf_bsd_v2.tar.gz --]
[-- Type: application/x-gzip, Size: 2985 bytes --]
[-- Attachment #3: reconf_linux_v2.tar.gz --]
[-- Type: application/x-gzip, Size: 4934 bytes --]
^ permalink raw reply
* [PATCH net-next 27/27] sctp: add reconf chunk event
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add reconf chunk event based on the sctp event
frame, after which, the reconf chunk process would be activated.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/constants.h | 3 +++
net/sctp/sm_statetable.c | 30 ++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index 3567c97..b07a745 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -60,11 +60,14 @@ enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM };
#define SCTP_NUM_PRSCTP_CHUNK_TYPES 1
+#define SCTP_NUM_RECONF_CHUNK_TYPES 1
+
#define SCTP_NUM_AUTH_CHUNK_TYPES 1
#define SCTP_NUM_CHUNK_TYPES (SCTP_NUM_BASE_CHUNK_TYPES + \
SCTP_NUM_ADDIP_CHUNK_TYPES +\
SCTP_NUM_PRSCTP_CHUNK_TYPES +\
+ SCTP_NUM_RECONF_CHUNK_TYPES +\
SCTP_NUM_AUTH_CHUNK_TYPES)
/* These are the different flavours of event. */
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index b5438b4..419b18e 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -482,6 +482,32 @@ static const sctp_sm_table_entry_t prsctp_chunk_event_table[SCTP_NUM_PRSCTP_CHUN
TYPE_SCTP_FWD_TSN,
}; /*state_fn_t prsctp_chunk_event_table[][] */
+#define TYPE_SCTP_RECONF { \
+ /* SCTP_STATE_CLOSED */ \
+ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+ /* SCTP_STATE_COOKIE_WAIT */ \
+ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+ /* SCTP_STATE_COOKIE_ECHOED */ \
+ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+ /* SCTP_STATE_ESTABLISHED */ \
+ TYPE_SCTP_FUNC(sctp_sf_do_reconf), \
+ /* SCTP_STATE_SHUTDOWN_PENDING */ \
+ TYPE_SCTP_FUNC(sctp_sf_do_reconf), \
+ /* SCTP_STATE_SHUTDOWN_SENT */ \
+ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+ /* SCTP_STATE_SHUTDOWN_RECEIVED */ \
+ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+ /* SCTP_STATE_SHUTDOWN_ACK_SENT */ \
+ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+} /* TYPE_SCTP_RECONF */
+
+/* The primary index for this table is the chunk type.
+ * The secondary index for this table is the state.
+ */
+static const sctp_sm_table_entry_t reconf_chunk_event_table[SCTP_NUM_RECONF_CHUNK_TYPES][SCTP_STATE_NUM_STATES] = {
+ TYPE_SCTP_RECONF,
+}; /*state_fn_t reconf_chunk_event_table[][] */
+
#define TYPE_SCTP_AUTH { \
/* SCTP_STATE_CLOSED */ \
TYPE_SCTP_FUNC(sctp_sf_ootb), \
@@ -964,6 +990,10 @@ static const sctp_sm_table_entry_t *sctp_chunk_event_lookup(struct net *net,
return &addip_chunk_event_table[1][state];
}
+ if (net->sctp.reconf_enable)
+ if (cid == SCTP_CID_RECONF)
+ return &reconf_chunk_event_table[0][state];
+
if (net->sctp.auth_enable) {
if (cid == SCTP_CID_AUTH)
return &auth_chunk_event_table[0][state];
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 26/27] sctp: add sctp reconf chunk process
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add a function to process the incoming reconf chunk,
in which it verifies the chunk, and traverses the param and process
it with the right function one by one.
sctp_sf_do_reconf would be the process function of reconf chunk event.
Note that to support multi-params in response chunk, it also adds a
function sctp_merge_reconf_chunk to merge two reconf chunk into one.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 8 +++++
net/sctp/sm_make_chunk.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++
net/sctp/sm_statefuns.c | 68 +++++++++++++++++++++++++++++++++++
3 files changed, 170 insertions(+)
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 7c2f956..17984eb 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -135,6 +135,7 @@ sctp_state_fn_t sctp_sf_do_8_5_1_E_sa;
sctp_state_fn_t sctp_sf_cookie_echoed_err;
sctp_state_fn_t sctp_sf_do_asconf;
sctp_state_fn_t sctp_sf_do_asconf_ack;
+sctp_state_fn_t sctp_sf_do_reconf;
sctp_state_fn_t sctp_sf_do_9_2_reshutack;
sctp_state_fn_t sctp_sf_eat_fwd_tsn;
sctp_state_fn_t sctp_sf_eat_fwd_tsn_fast;
@@ -277,6 +278,13 @@ struct sctp_chunk *sctp_make_strreset_tsnresp(
struct sctp_chunk *sctp_make_strreset_addstrm(
const struct sctp_association *asoc,
__u16 out, __u16 in);
+struct sctp_chunk *sctp_merge_reconf_chunk(
+ struct sctp_association *asoc,
+ struct sctp_chunk *last,
+ struct sctp_chunk *reply);
+bool sctp_verify_reconf(const struct sctp_association *asoc,
+ struct sctp_chunk *chunk,
+ struct sctp_paramhdr **errp);
void sctp_chunk_assign_tsn(struct sctp_chunk *);
void sctp_chunk_assign_ssn(struct sctp_chunk *);
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index f1efba6..74c3fee 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3819,3 +3819,97 @@ struct sctp_chunk *sctp_make_strreset_addstrm(
return retval;
}
+
+struct sctp_chunk *sctp_merge_reconf_chunk(
+ struct sctp_association *asoc,
+ struct sctp_chunk *last,
+ struct sctp_chunk *reply)
+{
+ struct sctp_chunk *retval = NULL;
+ __u16 lsize, rsize;
+
+ if (!reply)
+ return last;
+
+ rsize = ntohs(reply->param_hdr.p->length);
+ lsize = ntohs(last->param_hdr.p->length);
+
+ retval = sctp_make_reconf(asoc, lsize + rsize);
+ if (!retval)
+ goto out;
+
+ sctp_addto_chunk(retval, lsize, last->param_hdr.v);
+ sctp_addto_chunk(retval, rsize, reply->param_hdr.v);
+
+out:
+ if (asoc->strreset_chunk) {
+ sctp_chunk_put(asoc->strreset_chunk);
+ asoc->strreset_chunk = retval;
+ if (asoc->strreset_chunk)
+ sctp_chunk_hold(asoc->strreset_chunk);
+ }
+
+ sctp_chunk_free(reply);
+ sctp_chunk_free(last);
+
+ return retval;
+}
+
+bool sctp_verify_reconf(const struct sctp_association *asoc,
+ struct sctp_chunk *chunk,
+ struct sctp_paramhdr **errp)
+{
+ struct sctp_reconf_chunk *hdr;
+ union sctp_params param;
+ __u16 last = 0, cnt = 0;
+
+ hdr = (struct sctp_reconf_chunk *)chunk->chunk_hdr;
+ sctp_walk_params(param, hdr, params) {
+ __u16 length = ntohs(param.p->length);
+
+ *errp = param.p;
+ if (cnt++ > 2)
+ return false;
+ switch (param.p->type) {
+ case SCTP_PARAM_RESET_OUT_REQUEST:
+ if (length < sizeof(struct sctp_strreset_outreq) ||
+ (last && last != SCTP_PARAM_RESET_RESPONSE &&
+ last != SCTP_PARAM_RESET_IN_REQUEST))
+ return false;
+ break;
+ case SCTP_PARAM_RESET_IN_REQUEST:
+ if (length < sizeof(struct sctp_strreset_inreq) ||
+ (last && last != SCTP_PARAM_RESET_OUT_REQUEST))
+ return false;
+ break;
+ case SCTP_PARAM_RESET_RESPONSE:
+ if ((length != sizeof(struct sctp_strreset_resp) &&
+ length != sizeof(struct sctp_strreset_resptsn)) ||
+ (last && last != SCTP_PARAM_RESET_RESPONSE &&
+ last != SCTP_PARAM_RESET_OUT_REQUEST))
+ return false;
+ break;
+ case SCTP_PARAM_RESET_TSN_REQUEST:
+ if (length !=
+ sizeof(struct sctp_strreset_tsnreq) || last)
+ return false;
+ break;
+ case SCTP_PARAM_RESET_ADD_IN_STREAMS:
+ if (length != sizeof(struct sctp_strreset_addstrm) ||
+ (last && last != SCTP_PARAM_RESET_ADD_OUT_STREAMS))
+ return false;
+ break;
+ case SCTP_PARAM_RESET_ADD_OUT_STREAMS:
+ if (length != sizeof(struct sctp_strreset_addstrm) ||
+ (last && last != SCTP_PARAM_RESET_ADD_IN_STREAMS))
+ return false;
+ break;
+ default:
+ return false;
+ }
+
+ last = param.p->type;
+ }
+
+ return true;
+}
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index c06b134..4b05bd5 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3834,6 +3834,74 @@ sctp_disposition_t sctp_sf_do_asconf_ack(struct net *net,
return SCTP_DISPOSITION_DISCARD;
}
+/* RE-CONFIG Section 5.2 Upon reception of an RECONF Chunk. */
+sctp_disposition_t sctp_sf_do_reconf(struct net *net,
+ const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ const sctp_subtype_t type, void *arg,
+ sctp_cmd_seq_t *commands)
+{
+ struct sctp_paramhdr *err_param = NULL;
+ struct sctp_chunk *reply = NULL;
+ struct sctp_chunk *last = NULL;
+ struct sctp_chunk *chunk = arg;
+ struct sctp_reconf_chunk *hdr;
+ union sctp_params param;
+
+ if (!sctp_vtag_verify(chunk, asoc)) {
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_BAD_TAG,
+ SCTP_NULL());
+ return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
+ }
+
+ /* Make sure that the RECONF chunk has a valid length. */
+ if (!sctp_chunk_length_valid(chunk, sizeof(*hdr)))
+ return sctp_sf_violation_chunklen(net, ep, asoc, type, arg,
+ commands);
+
+ if (!sctp_verify_reconf(asoc, chunk, &err_param))
+ return sctp_sf_violation_paramlen(net, ep, asoc, type, arg,
+ (void *)err_param, commands);
+
+ hdr = (struct sctp_reconf_chunk *)chunk->chunk_hdr;
+ sctp_walk_params(param, hdr, params) {
+ struct sctp_ulpevent *ev = NULL;
+
+ if (param.p->type == SCTP_PARAM_RESET_OUT_REQUEST)
+ reply = sctp_process_strreset_outreq(
+ (struct sctp_association *)asoc, param, &ev);
+ else if (param.p->type == SCTP_PARAM_RESET_IN_REQUEST)
+ reply = sctp_process_strreset_inreq(
+ (struct sctp_association *)asoc, param, &ev);
+ else if (param.p->type == SCTP_PARAM_RESET_TSN_REQUEST)
+ reply = sctp_process_strreset_tsnreq(
+ (struct sctp_association *)asoc, param, &ev);
+ else if (param.p->type == SCTP_PARAM_RESET_ADD_OUT_STREAMS)
+ reply = sctp_process_strreset_addstrm_out(
+ (struct sctp_association *)asoc, param, &ev);
+ else if (param.p->type == SCTP_PARAM_RESET_ADD_IN_STREAMS)
+ reply = sctp_process_strreset_addstrm_in(
+ (struct sctp_association *)asoc, param, &ev);
+ else if (param.p->type == SCTP_PARAM_RESET_RESPONSE)
+ reply = sctp_process_strreset_resp(
+ (struct sctp_association *)asoc, param, &ev);
+
+ if (ev)
+ sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
+ SCTP_ULPEVENT(ev));
+
+ if (last)
+ reply = sctp_merge_reconf_chunk(
+ (struct sctp_association *)asoc, last, reply);
+ last = reply;
+ }
+
+ if (reply)
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
+
+ return SCTP_DISPOSITION_CONSUME;
+}
+
/*
* PR-SCTP Section 3.6 Receiver Side Implementation of PR-SCTP
*
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 25/27] sctp: add rfc6525 section 5.2.7
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Receiver-Side Procedures for the
Re-configuration Response Parameter in section 5.2.7.
sctp_process_strreset_resp would process the response for any
kind of reconf request, and the stream reconf is applied only
when the response result is success.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 4 ++
net/sctp/stream.c | 163 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 167 insertions(+)
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index b8ca767..7c2f956 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -301,6 +301,10 @@ struct sctp_chunk *sctp_process_strreset_addstrm_in(
struct sctp_association *asoc,
union sctp_params param,
struct sctp_ulpevent **evp);
+struct sctp_chunk *sctp_process_strreset_resp(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp);
/* Prototypes for statetable processing. */
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index a2b248b..ae64de2 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -398,3 +398,166 @@ struct sctp_chunk *sctp_process_strreset_addstrm_in(
out:
return sctp_make_strreset_resp(asoc, result, request_seq);
}
+
+struct sctp_chunk *sctp_process_strreset_resp(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp)
+{
+ struct sctp_strreset_resp *resp = param.v;
+ struct sctp_strreset_req *req;
+ struct sctp_transport *t;
+ __u16 i, nums, flags = 0;
+ __u32 result;
+
+ req = sctp_chunk_lookup_strreset_param(
+ asoc, ntohl(resp->response_seq));
+ if (!req)
+ return NULL;
+
+ result = ntohl(resp->result);
+ if (result != SCTP_STRRESET_PERFORMED) {
+ /* if in progress, do nothing but retransmit */
+ if (result == SCTP_STRRESET_IN_PROGRESS)
+ return NULL;
+ else if (result == SCTP_STRRESET_DENIED)
+ flags = SCTP_STREAM_RESET_DENIED;
+ else
+ flags = SCTP_STREAM_RESET_FAILED;
+ }
+
+ if (req->param_hdr.type == SCTP_PARAM_RESET_OUT_REQUEST) {
+ struct sctp_strreset_outreq *outreq;
+ __u16 *str_p = NULL;
+
+ outreq = (struct sctp_strreset_outreq *)req;
+ nums = (ntohs(outreq->param_hdr.length) - sizeof(*outreq)) / 2;
+
+ if (nums) {
+ str_p = outreq->list_of_streams;
+ for (i = 0; i < nums; i++)
+ str_p[i] = ntohs(str_p[i]);
+ }
+
+ if (result == SCTP_STRRESET_PERFORMED) {
+ if (nums) {
+ str_p = outreq->list_of_streams;
+ for (i = 0; i < nums; i++, str_p++)
+ asoc->streamout[*str_p].ssn = 0;
+ } else {
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].ssn = 0;
+ }
+
+ flags = SCTP_STREAM_RESET_OUTGOING_SSN;
+ }
+
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].state = SCTP_STREAM_OPEN;
+
+ *evp = sctp_ulpevent_make_stream_reset_event(asoc, flags,
+ nums, str_p, GFP_ATOMIC);
+ } else if (req->param_hdr.type == SCTP_PARAM_RESET_IN_REQUEST) {
+ struct sctp_strreset_inreq *inreq;
+ __u16 *str_p = NULL;
+
+ /* if the result is performed, it's impossible for inreq */
+ if (result == SCTP_STRRESET_PERFORMED)
+ return NULL;
+
+ inreq = (struct sctp_strreset_inreq *)req;
+ nums = (ntohs(inreq->param_hdr.length) - sizeof(*inreq)) / 2;
+
+ if (nums) {
+ str_p = inreq->list_of_streams;
+ for (i = 0; i < nums; i++)
+ str_p[i] = ntohs(str_p[i]);
+ }
+
+ str_p = inreq->list_of_streams;
+ *evp = sctp_ulpevent_make_stream_reset_event(asoc, flags,
+ nums, str_p, GFP_ATOMIC);
+ } else if (req->param_hdr.type == SCTP_PARAM_RESET_TSN_REQUEST) {
+ struct sctp_strreset_resptsn *resptsn;
+ __u32 stsn, rtsn;
+
+ /* check for resptsn, as sctp_verify_reconf didn't do it*/
+ if (ntohs(param.p->length) != sizeof(*resptsn))
+ return NULL;
+
+ resptsn = (struct sctp_strreset_resptsn *)resp;
+ stsn = ntohl(resptsn->senders_next_tsn);
+ rtsn = ntohl(resptsn->receivers_next_tsn);
+
+ if (result == SCTP_STRRESET_PERFORMED) {
+ __u32 mtsn = sctp_tsnmap_get_max_tsn_seen(
+ &asoc->peer.tsn_map);
+
+ sctp_ulpq_reasm_flushtsn(&asoc->ulpq, mtsn);
+ sctp_ulpq_abort_pd(&asoc->ulpq, GFP_ATOMIC);
+
+ sctp_tsnmap_init(&asoc->peer.tsn_map,
+ SCTP_TSN_MAP_INITIAL,
+ stsn, GFP_ATOMIC);
+
+ sctp_outq_free(&asoc->outqueue);
+
+ asoc->next_tsn = rtsn;
+ asoc->ctsn_ack_point = asoc->next_tsn - 1;
+ asoc->adv_peer_ack_point = asoc->ctsn_ack_point;
+
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].ssn = 0;
+ for (i = 0; i < asoc->streamincnt; i++)
+ asoc->streamin[i].ssn = 0;
+ }
+
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].state = SCTP_STREAM_OPEN;
+
+ *evp = sctp_ulpevent_make_assoc_reset_event(asoc, flags,
+ stsn, rtsn, GFP_ATOMIC);
+ } else if (req->param_hdr.type == SCTP_PARAM_RESET_ADD_OUT_STREAMS) {
+ struct sctp_strreset_addstrm *addstrm;
+ __u16 number;
+
+ addstrm = (struct sctp_strreset_addstrm *)req;
+ nums = ntohs(addstrm->number_of_streams);
+ number = asoc->streamoutcnt - nums;
+
+ if (result == SCTP_STRRESET_PERFORMED)
+ for (i = number; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].state = SCTP_STREAM_OPEN;
+ else
+ asoc->streamoutcnt = number;
+
+ *evp = sctp_ulpevent_make_stream_change_event(asoc, flags,
+ 0, nums, GFP_ATOMIC);
+ } else if (req->param_hdr.type == SCTP_PARAM_RESET_ADD_IN_STREAMS) {
+ struct sctp_strreset_addstrm *addstrm;
+
+ addstrm = (struct sctp_strreset_addstrm *)req;
+ nums = ntohs(addstrm->number_of_streams);
+
+ if (result != SCTP_STRRESET_PERFORMED)
+ asoc->streamincnt = asoc->streamincnt - nums;
+
+ *evp = sctp_ulpevent_make_stream_change_event(asoc, flags,
+ nums, 0, GFP_ATOMIC);
+ }
+
+ asoc->strreset_outstanding--;
+ asoc->strreset_outseq++;
+
+ /* remove everything for this reconf request */
+ if (!asoc->strreset_outstanding) {
+ t = asoc->strreset_chunk->transport;
+ if (del_timer(&t->reconf_timer))
+ sctp_transport_put(t);
+
+ sctp_chunk_put(asoc->strreset_chunk);
+ asoc->strreset_chunk = NULL;
+ }
+
+ return NULL;
+}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 24/27] sctp: add rfc6525 section 5.2.6
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Receiver-Side Procedures for the Add Incoming
Streams Request Parameter described in section 5.2.6.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 4 ++++
net/sctp/stream.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+)
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 5624b52..b8ca767 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -297,6 +297,10 @@ struct sctp_chunk *sctp_process_strreset_addstrm_out(
struct sctp_association *asoc,
union sctp_params param,
struct sctp_ulpevent **evp);
+struct sctp_chunk *sctp_process_strreset_addstrm_in(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp);
/* Prototypes for statetable processing. */
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index b51a037..a2b248b 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -339,3 +339,62 @@ struct sctp_chunk *sctp_process_strreset_addstrm_out(
out:
return sctp_make_strreset_resp(asoc, result, request_seq);
}
+
+struct sctp_chunk *sctp_process_strreset_addstrm_in(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp)
+{
+ struct sctp_strreset_addstrm *addstrm = param.v;
+ __u32 result = SCTP_STRRESET_DENIED;
+ __u32 request_seq;
+ __u16 i, nums;
+
+ request_seq = ntohl(addstrm->request_seq);
+ if (request_seq > asoc->strreset_inseq) {
+ result = SCTP_STRRESET_ERR_BAD_SEQNO;
+ goto out;
+ } else if (request_seq == asoc->strreset_inseq) {
+ asoc->strreset_inseq++;
+ }
+
+ if (!(asoc->strreset_enable & SCTP_ENABLE_CHANGE_ASSOC_REQ))
+ goto out;
+
+ if (asoc->strreset_outstanding) {
+ result = SCTP_STRRESET_ERR_IN_PROGRESS;
+ goto out;
+ }
+
+ nums = ntohs(addstrm->number_of_streams);
+ if (!nums || nums + asoc->streamoutcnt > SCTP_MAX_STREAM)
+ goto out;
+
+ nums = nums + asoc->streamoutcnt;
+ if (ksize(asoc->streamout) / sizeof(*asoc->streamout) < nums) {
+ struct sctp_stream_out *streamout;
+
+ streamout = kcalloc(nums, sizeof(*streamout), GFP_ATOMIC);
+ if (!streamout)
+ goto out;
+
+ memcpy(streamout, asoc->streamout,
+ sizeof(*streamout) * asoc->streamoutcnt);
+
+ kfree(asoc->streamout);
+ asoc->streamout = streamout;
+ }
+
+ for (i = asoc->streamoutcnt; i < nums; i++)
+ asoc->streamout[i].state = SCTP_STREAM_OPEN;
+
+ asoc->streamoutcnt = nums;
+
+ result = SCTP_STRRESET_PERFORMED;
+
+ *evp = sctp_ulpevent_make_stream_change_event(asoc,
+ 0, 0, ntohs(addstrm->number_of_streams), GFP_ATOMIC);
+
+out:
+ return sctp_make_strreset_resp(asoc, result, request_seq);
+}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 23/27] sctp: add rfc6525 section 5.2.5
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add Receiver-Side Procedures for the Add Outgoing
Streams Request Parameter described in section 5.2.5.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 4 ++++
net/sctp/stream.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index e1b2509..5624b52 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -293,6 +293,10 @@ struct sctp_chunk *sctp_process_strreset_tsnreq(
struct sctp_association *asoc,
union sctp_params param,
struct sctp_ulpevent **evp);
+struct sctp_chunk *sctp_process_strreset_addstrm_out(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp);
/* Prototypes for statetable processing. */
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index fce4317..b51a037 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -283,3 +283,59 @@ struct sctp_chunk *sctp_process_strreset_tsnreq(
return sctp_make_strreset_tsnresp(asoc, result, request_seq,
asoc->next_tsn, initial_tsn);
}
+
+struct sctp_chunk *sctp_process_strreset_addstrm_out(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp)
+{
+ struct sctp_strreset_addstrm *addstrm = param.v;
+ __u32 result = SCTP_STRRESET_DENIED;
+ __u32 request_seq;
+ __u16 nums;
+
+ request_seq = ntohl(addstrm->request_seq);
+ if (request_seq > asoc->strreset_inseq) {
+ result = SCTP_STRRESET_ERR_BAD_SEQNO;
+ goto out;
+ } else if (request_seq == asoc->strreset_inseq) {
+ asoc->strreset_inseq++;
+ }
+
+ if (!(asoc->strreset_enable & SCTP_ENABLE_CHANGE_ASSOC_REQ))
+ goto out;
+
+ if (asoc->strreset_outstanding) {
+ result = SCTP_STRRESET_ERR_IN_PROGRESS;
+ goto out;
+ }
+
+ nums = ntohs(addstrm->number_of_streams);
+ if (!nums || nums + asoc->streamincnt > SCTP_MAX_STREAM)
+ goto out;
+
+ nums = nums + asoc->streamincnt;
+ if (ksize(asoc->streamin) / sizeof(*asoc->streamin) < nums) {
+ struct sctp_stream_in *streamin;
+
+ streamin = kcalloc(nums, sizeof(*streamin), GFP_ATOMIC);
+ if (!streamin)
+ goto out;
+
+ memcpy(streamin, asoc->streamin,
+ sizeof(*streamin) * asoc->streamincnt);
+
+ kfree(asoc->streamin);
+ asoc->streamin = streamin;
+ }
+
+ asoc->streamincnt = nums;
+
+ result = SCTP_STRRESET_PERFORMED;
+
+ *evp = sctp_ulpevent_make_stream_change_event(asoc,
+ 0, ntohs(addstrm->number_of_streams), 0, GFP_ATOMIC);
+
+out:
+ return sctp_make_strreset_resp(asoc, result, request_seq);
+}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 22/27] sctp: add rfc6525 section 5.2.4
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Receiver-Side Procedures for the SSN/TSN
Reset Request Parameter described in section 6.2.4.
The process is kinda complicate, it's wonth having comments from
section 6.2.4 in the codes.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 4 +++
net/sctp/stream.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 180d017..e1b2509 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -289,6 +289,10 @@ struct sctp_chunk *sctp_process_strreset_inreq(
struct sctp_association *asoc,
union sctp_params param,
struct sctp_ulpevent **evp);
+struct sctp_chunk *sctp_process_strreset_tsnreq(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp);
/* Prototypes for statetable processing. */
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index 3053d06..fce4317 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -207,3 +207,79 @@ struct sctp_chunk *sctp_process_strreset_inreq(
return chunk;
}
+
+struct sctp_chunk *sctp_process_strreset_tsnreq(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp)
+{
+ struct sctp_strreset_tsnreq *tsnreq = param.v;
+ __u32 request_seq, initial_tsn, max_tsn_seen;
+ __u32 result = SCTP_STRRESET_DENIED;
+ __u16 i;
+
+ request_seq = ntohl(tsnreq->request_seq);
+ if (request_seq > asoc->strreset_inseq) {
+ result = SCTP_STRRESET_ERR_BAD_SEQNO;
+ goto out;
+ } else if (request_seq == asoc->strreset_inseq) {
+ asoc->strreset_inseq++;
+ }
+
+ if (!(asoc->strreset_enable & SCTP_ENABLE_RESET_ASSOC_REQ))
+ goto out;
+
+ if (asoc->strreset_outstanding) {
+ result = SCTP_STRRESET_ERR_IN_PROGRESS;
+ goto out;
+ }
+
+ /* G3: The same processing as though a SACK chunk with no gap report
+ * and a cumulative TSN ACK of the Sender's Next TSN minus 1 were
+ * received MUST be performed.
+ */
+ max_tsn_seen = sctp_tsnmap_get_max_tsn_seen(&asoc->peer.tsn_map);
+ sctp_ulpq_reasm_flushtsn(&asoc->ulpq, max_tsn_seen);
+ sctp_ulpq_abort_pd(&asoc->ulpq, GFP_ATOMIC);
+
+ /* G1: Compute an appropriate value for the Receiver's Next TSN -- the
+ * TSN that the peer should use to send the next DATA chunk. The
+ * value SHOULD be the smallest TSN not acknowledged by the
+ * receiver of the request plus 2^31.
+ */
+ initial_tsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map) + (1 << 31);
+ sctp_tsnmap_init(&asoc->peer.tsn_map, SCTP_TSN_MAP_INITIAL,
+ initial_tsn, GFP_ATOMIC);
+
+ /* G4: The same processing as though a FWD-TSN chunk (as defined in
+ * [RFC3758]) with all streams affected and a new cumulative TSN
+ * ACK of the Receiver's Next TSN minus 1 were received MUST be
+ * performed.
+ */
+ sctp_outq_free(&asoc->outqueue);
+
+ /* G2: Compute an appropriate value for the local endpoint's next TSN,
+ * i.e., the next TSN assigned by the receiver of the SSN/TSN reset
+ * chunk. The value SHOULD be the highest TSN sent by the receiver
+ * of the request plus 1.
+ */
+ asoc->ctsn_ack_point = asoc->next_tsn - 1;
+ asoc->adv_peer_ack_point = asoc->ctsn_ack_point;
+
+ /* G5: The next expected and outgoing SSNs MUST be reset to 0 for all
+ * incoming and outgoing streams.
+ */
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].ssn = 0;
+ for (i = 0; i < asoc->streamincnt; i++)
+ asoc->streamin[i].ssn = 0;
+
+ result = SCTP_STRRESET_PERFORMED;
+
+ *evp = sctp_ulpevent_make_assoc_reset_event(asoc,
+ 0, initial_tsn, asoc->next_tsn, GFP_ATOMIC);
+
+out:
+ return sctp_make_strreset_tsnresp(asoc, result, request_seq,
+ asoc->next_tsn, initial_tsn);
+}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 21/27] sctp: add rfc6525 section 5.2.3
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Receiver-Side Procedures for the Incoming
SSN Reset Request Parameter described in section 5.2.3.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 4 ++++
net/sctp/stream.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 67 insertions(+)
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 1833215..180d017 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -285,6 +285,10 @@ struct sctp_chunk *sctp_process_strreset_outreq(
struct sctp_association *asoc,
union sctp_params param,
struct sctp_ulpevent **evp);
+struct sctp_chunk *sctp_process_strreset_inreq(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp);
/* Prototypes for statetable processing. */
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index 1d5b795..3053d06 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -144,3 +144,66 @@ struct sctp_chunk *sctp_process_strreset_outreq(
out:
return sctp_make_strreset_resp(asoc, result, request_seq);
}
+
+struct sctp_chunk *sctp_process_strreset_inreq(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp)
+{
+ struct sctp_strreset_inreq *inreq = param.v;
+ __u32 result = SCTP_STRRESET_DENIED;
+ struct sctp_chunk *chunk = NULL;
+ __u16 i, nums, *str_p;
+ __u32 request_seq;
+
+ request_seq = ntohl(inreq->request_seq);
+ if (request_seq > asoc->strreset_inseq) {
+ result = SCTP_STRRESET_ERR_BAD_SEQNO;
+ goto out;
+ } else if (request_seq == asoc->strreset_inseq) {
+ asoc->strreset_inseq++;
+ }
+
+ if (!(asoc->strreset_enable & SCTP_ENABLE_RESET_STREAM_REQ))
+ goto out;
+
+ if (asoc->strreset_outstanding) {
+ result = SCTP_STRRESET_ERR_IN_PROGRESS;
+ goto out;
+ }
+
+ nums = (ntohs(param.p->length) - sizeof(*inreq)) / 2;
+ str_p = inreq->list_of_streams;
+ for (i = 0; i < nums; i++) {
+ str_p[i] = ntohs(str_p[i]);
+ if (str_p[i] >= asoc->streamoutcnt) {
+ result = SCTP_STRRESET_ERR_WRONG_SSN;
+ goto out;
+ }
+ }
+
+ chunk = sctp_make_strreset_req(asoc, nums, str_p, 1, 0);
+ if (!chunk)
+ goto out;
+
+ if (nums)
+ for (i = 0; i < nums; i++)
+ asoc->streamout[str_p[i]].state =
+ SCTP_STREAM_CLOSED;
+ else
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].state = SCTP_STREAM_CLOSED;
+
+ asoc->strreset_chunk = chunk;
+ asoc->strreset_outstanding = 1;
+ sctp_chunk_hold(asoc->strreset_chunk);
+
+ *evp = sctp_ulpevent_make_stream_reset_event(asoc,
+ SCTP_STREAM_RESET_INCOMING_SSN, nums, str_p, GFP_ATOMIC);
+
+out:
+ if (!chunk)
+ chunk = sctp_make_strreset_resp(asoc, result, request_seq);
+
+ return chunk;
+}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 20/27] sctp: add rfc6525 section 5.2.2
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Receiver-Side Procedures for the Outgoing
SSN Reset Request Parameter described in section 5.2.2.
Note that some checks must be after request_seq check, as even those
checks fail, strreset_inseq still has to be increase by 1.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/sm.h | 6 +++
net/sctp/Makefile | 3 +-
net/sctp/stream.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 154 insertions(+), 1 deletion(-)
create mode 100644 net/sctp/stream.c
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index bcca913..1833215 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -280,6 +280,12 @@ struct sctp_chunk *sctp_make_strreset_addstrm(
void sctp_chunk_assign_tsn(struct sctp_chunk *);
void sctp_chunk_assign_ssn(struct sctp_chunk *);
+/* Prototypes for stream-processing functions. */
+struct sctp_chunk *sctp_process_strreset_outreq(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp);
+
/* Prototypes for statetable processing. */
int sctp_do_sm(struct net *net, sctp_event_t event_type, sctp_subtype_t subtype,
diff --git a/net/sctp/Makefile b/net/sctp/Makefile
index 48bfc74..02d8d01 100644
--- a/net/sctp/Makefile
+++ b/net/sctp/Makefile
@@ -11,7 +11,8 @@ sctp-y := sm_statetable.o sm_statefuns.o sm_sideeffect.o \
transport.o chunk.o sm_make_chunk.o ulpevent.o \
inqueue.o outqueue.o ulpqueue.o \
tsnmap.o bind_addr.o socket.o primitive.o \
- output.o input.o debug.o auth.o offload.o
+ output.o input.o debug.o auth.o offload.o \
+ stream.o
sctp_probe-y := probe.o
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
new file mode 100644
index 0000000..1d5b795
--- /dev/null
+++ b/net/sctp/stream.c
@@ -0,0 +1,146 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * These functions manipulate sctp tsn mapping array.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ * lksctp developers <linux-sctp@vger.kernel.org>
+ *
+ * Written or modified by:
+ * Xin Long <lucien.xin@gmail.com>
+ */
+
+#include <net/sctp/sctp.h>
+#include <net/sctp/sm.h>
+
+static struct sctp_strreset_req *sctp_chunk_lookup_strreset_param(
+ struct sctp_association *asoc, __u32 resp_seq)
+{
+ struct sctp_chunk *chunk = asoc->strreset_chunk;
+ struct sctp_reconf_chunk *hdr;
+ union sctp_params param;
+
+ if (resp_seq != asoc->strreset_outseq || !chunk)
+ return NULL;
+
+ hdr = (struct sctp_reconf_chunk *)chunk->chunk_hdr;
+ sctp_walk_params(param, hdr, params) {
+ struct sctp_strreset_req *req = param.v;
+
+ if (ntohl(req->request_seq) == resp_seq)
+ return req;
+ }
+
+ return NULL;
+}
+
+struct sctp_chunk *sctp_process_strreset_outreq(
+ struct sctp_association *asoc,
+ union sctp_params param,
+ struct sctp_ulpevent **evp)
+{
+ struct sctp_strreset_outreq *outreq = param.v;
+ __u32 result = SCTP_STRRESET_DENIED;
+ __u16 i, nums, *str_p, flags = 0;
+ __u32 request_seq;
+
+ request_seq = ntohl(outreq->request_seq);
+
+ if (ntohl(outreq->send_reset_at_tsn) >
+ sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map)) {
+ result = SCTP_STRRESET_IN_PROGRESS;
+ goto out;
+ }
+
+ if (request_seq > asoc->strreset_inseq) {
+ result = SCTP_STRRESET_ERR_BAD_SEQNO;
+ goto out;
+ } else if (request_seq == asoc->strreset_inseq) {
+ asoc->strreset_inseq++;
+ }
+
+ /* Check strreset_enable after inseq inc, as sender cannot tell
+ * the peer doesn't enable strreset after receiving response with
+ * result denied, as well as to keep consistent with bsd.
+ */
+ if (!(asoc->strreset_enable & SCTP_ENABLE_RESET_STREAM_REQ))
+ goto out;
+
+ if (asoc->strreset_chunk) {
+ struct sctp_strreset_req *inreq;
+ struct sctp_transport *t;
+
+ inreq = sctp_chunk_lookup_strreset_param(
+ asoc, ntohl(outreq->response_seq));
+ if (!inreq || inreq->param_hdr.type !=
+ SCTP_PARAM_RESET_IN_REQUEST) {
+ /* same process with outstanding isn't 0 */
+ result = SCTP_STRRESET_ERR_IN_PROGRESS;
+ goto out;
+ }
+
+ asoc->strreset_outstanding--;
+ asoc->strreset_outseq++;
+
+ if (!asoc->strreset_outstanding) {
+ t = asoc->strreset_chunk->transport;
+ if (del_timer(&t->reconf_timer))
+ sctp_transport_put(t);
+
+ sctp_chunk_put(asoc->strreset_chunk);
+ asoc->strreset_chunk = NULL;
+ }
+
+ flags = SCTP_STREAM_RESET_INCOMING_SSN;
+ }
+
+ nums = (ntohs(param.p->length) - sizeof(*outreq)) / 2;
+ if (nums) {
+ str_p = outreq->list_of_streams;
+ for (i = 0; i < nums; i++) {
+ str_p[i] = ntohs(str_p[i]);
+ if (str_p[i] >= asoc->streamincnt) {
+ result = SCTP_STRRESET_ERR_WRONG_SSN;
+ goto out;
+ }
+ }
+
+ str_p = outreq->list_of_streams;
+ for (i = 0; i < nums; i++, str_p++)
+ asoc->streamin[*str_p].ssn = 0;
+ } else {
+ for (i = 0; i < asoc->streamincnt; i++)
+ asoc->streamin[i].ssn = 0;
+ }
+
+ result = SCTP_STRRESET_PERFORMED;
+
+ *evp = sctp_ulpevent_make_stream_reset_event(asoc,
+ flags | SCTP_STREAM_RESET_OUTGOING_SSN, nums, str_p,
+ GFP_ATOMIC);
+
+out:
+ return sctp_make_strreset_resp(asoc, result, request_seq);
+}
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 19/27] sctp: add rfc6525 section 6.1.3
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add Stream Change Event described in section 6.1.3.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/ulpevent.h | 4 ++++
include/uapi/linux/sctp.h | 15 +++++++++++++++
net/sctp/ulpevent.c | 28 ++++++++++++++++++++++++++++
3 files changed, 47 insertions(+)
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 2ab7ed4..1060494 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -136,6 +136,10 @@ struct sctp_ulpevent *sctp_ulpevent_make_assoc_reset_event(
const struct sctp_association *asoc, __u16 flags,
__u32 local_tsn, __u32 remote_tsn, gfp_t gfp);
+struct sctp_ulpevent *sctp_ulpevent_make_stream_change_event(
+ const struct sctp_association *asoc, __u16 flags,
+ __u32 strchange_instrms, __u32 strchange_outstrms, gfp_t gfp);
+
void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
struct msghdr *);
void sctp_ulpevent_read_rcvinfo(const struct sctp_ulpevent *event,
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 9da165a..90a8e2c 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -514,6 +514,17 @@ struct sctp_assoc_reset_event {
uint32_t assocreset_remote_tsn;
};
+#define SCTP_ASSOC_CHANGE_DENIED 0x0004
+#define SCTP_ASSOC_CHANGE_FAILED 0x0008
+struct sctp_stream_change_event {
+ uint16_t strchange_type;
+ uint16_t strchange_flags;
+ uint32_t strchange_length;
+ sctp_assoc_t strchange_assoc_id;
+ uint16_t strchange_instrms;
+ uint16_t strchange_outstrms;
+};
+
/*
* Described in Section 7.3
* Ancillary Data and Notification Interest Options
@@ -531,6 +542,7 @@ struct sctp_event_subscribe {
uint8_t sctp_sender_dry_event;
uint8_t sctp_stream_reset_event;
uint8_t sctp_assoc_reset_event;
+ uint8_t sctp_stream_change_event;
};
/*
@@ -557,6 +569,7 @@ union sctp_notification {
struct sctp_sender_dry_event sn_sender_dry_event;
struct sctp_stream_reset_event sn_strreset_event;
struct sctp_assoc_reset_event sn_assocreset_event;
+ struct sctp_stream_change_event sn_strchange_event;
};
/* Section 5.3.1
@@ -588,6 +601,8 @@ enum sctp_sn_type {
#define SCTP_STREAM_RESET_EVENT SCTP_STREAM_RESET_EVENT
SCTP_ASSOC_RESET_EVENT,
#define SCTP_ASSOC_RESET_EVENT SCTP_ASSOC_RESET_EVENT
+ SCTP_STREAM_CHANGE_EVENT,
+#define SCTP_STREAM_CHANGE_EVENT SCTP_STREAM_CHANGE_EVENT
};
/* Notification error codes used to fill up the error fields in some
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 5492cd7..c56460f 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -912,6 +912,34 @@ struct sctp_ulpevent *sctp_ulpevent_make_assoc_reset_event(
return event;
}
+struct sctp_ulpevent *sctp_ulpevent_make_stream_change_event(
+ const struct sctp_association *asoc, __u16 flags,
+ __u32 strchange_instrms, __u32 strchange_outstrms, gfp_t gfp)
+{
+ struct sctp_stream_change_event *schange;
+ struct sctp_ulpevent *event;
+ struct sk_buff *skb;
+
+ event = sctp_ulpevent_new(sizeof(struct sctp_stream_change_event),
+ MSG_NOTIFICATION, gfp);
+ if (!event)
+ return NULL;
+
+ skb = sctp_event2skb(event);
+ schange = (struct sctp_stream_change_event *)
+ skb_put(skb, sizeof(struct sctp_stream_change_event));
+
+ schange->strchange_type = SCTP_STREAM_CHANGE_EVENT;
+ schange->strchange_flags = flags;
+ schange->strchange_length = sizeof(struct sctp_stream_change_event);
+ sctp_ulpevent_set_owner(event, asoc);
+ schange->strchange_assoc_id = sctp_assoc2id(asoc);
+ schange->strchange_instrms = strchange_instrms;
+ schange->strchange_outstrms = strchange_outstrms;
+
+ return event;
+}
+
/* Return the notification type, assuming this is a notification
* event.
*/
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 18/27] sctp: add rfc6525 section 6.1.2
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add Association Reset Event described in section 6.1.2.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/ulpevent.h | 4 ++++
include/uapi/linux/sctp.h | 15 +++++++++++++++
net/sctp/ulpevent.c | 28 ++++++++++++++++++++++++++++
3 files changed, 47 insertions(+)
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 324b596..2ab7ed4 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -132,6 +132,10 @@ struct sctp_ulpevent *sctp_ulpevent_make_stream_reset_event(
const struct sctp_association *asoc, __u16 flags,
__u16 stream_num, __u16 *stream_list, gfp_t gfp);
+struct sctp_ulpevent *sctp_ulpevent_make_assoc_reset_event(
+ const struct sctp_association *asoc, __u16 flags,
+ __u32 local_tsn, __u32 remote_tsn, gfp_t gfp);
+
void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
struct msghdr *);
void sctp_ulpevent_read_rcvinfo(const struct sctp_ulpevent *event,
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 97b8a96..9da165a 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -503,6 +503,17 @@ struct sctp_stream_reset_event {
uint16_t strreset_stream_list[];
};
+#define SCTP_ASSOC_RESET_DENIED 0x0004
+#define SCTP_ASSOC_RESET_FAILED 0x0008
+struct sctp_assoc_reset_event {
+ uint16_t assocreset_type;
+ uint16_t assocreset_flags;
+ uint32_t assocreset_length;
+ sctp_assoc_t assocreset_assoc_id;
+ uint32_t assocreset_local_tsn;
+ uint32_t assocreset_remote_tsn;
+};
+
/*
* Described in Section 7.3
* Ancillary Data and Notification Interest Options
@@ -519,6 +530,7 @@ struct sctp_event_subscribe {
uint8_t sctp_authentication_event;
uint8_t sctp_sender_dry_event;
uint8_t sctp_stream_reset_event;
+ uint8_t sctp_assoc_reset_event;
};
/*
@@ -544,6 +556,7 @@ union sctp_notification {
struct sctp_authkey_event sn_authkey_event;
struct sctp_sender_dry_event sn_sender_dry_event;
struct sctp_stream_reset_event sn_strreset_event;
+ struct sctp_assoc_reset_event sn_assocreset_event;
};
/* Section 5.3.1
@@ -573,6 +586,8 @@ enum sctp_sn_type {
#define SCTP_SENDER_DRY_EVENT SCTP_SENDER_DRY_EVENT
SCTP_STREAM_RESET_EVENT,
#define SCTP_STREAM_RESET_EVENT SCTP_STREAM_RESET_EVENT
+ SCTP_ASSOC_RESET_EVENT,
+#define SCTP_ASSOC_RESET_EVENT SCTP_ASSOC_RESET_EVENT
};
/* Notification error codes used to fill up the error fields in some
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 490d573..5492cd7 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -884,6 +884,34 @@ struct sctp_ulpevent *sctp_ulpevent_make_stream_reset_event(
return event;
}
+struct sctp_ulpevent *sctp_ulpevent_make_assoc_reset_event(
+ const struct sctp_association *asoc, __u16 flags, __u32 local_tsn,
+ __u32 remote_tsn, gfp_t gfp)
+{
+ struct sctp_assoc_reset_event *areset;
+ struct sctp_ulpevent *event;
+ struct sk_buff *skb;
+
+ event = sctp_ulpevent_new(sizeof(struct sctp_assoc_reset_event),
+ MSG_NOTIFICATION, gfp);
+ if (!event)
+ return NULL;
+
+ skb = sctp_event2skb(event);
+ areset = (struct sctp_assoc_reset_event *)
+ skb_put(skb, sizeof(struct sctp_assoc_reset_event));
+
+ areset->assocreset_type = SCTP_ASSOC_RESET_EVENT;
+ areset->assocreset_flags = flags;
+ areset->assocreset_length = sizeof(struct sctp_assoc_reset_event);
+ sctp_ulpevent_set_owner(event, asoc);
+ areset->assocreset_assoc_id = sctp_assoc2id(asoc);
+ areset->assocreset_local_tsn = local_tsn;
+ areset->assocreset_remote_tsn = remote_tsn;
+
+ return event;
+}
+
/* Return the notification type, assuming this is a notification
* event.
*/
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 17/27] sctp: add rfc6525 section 6.1.1
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add Stream Reset Event described in section 6.1.1.
It's added earlier here so that the codes for other sections could
invoked them.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/ulpevent.h | 4 ++++
include/uapi/linux/sctp.h | 36 ++++++++++++++++++++++++++----------
net/sctp/ulpevent.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 60 insertions(+), 10 deletions(-)
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 2c098cd..324b596 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -128,6 +128,10 @@ struct sctp_ulpevent *sctp_ulpevent_make_authkey(
struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
const struct sctp_association *asoc, gfp_t gfp);
+struct sctp_ulpevent *sctp_ulpevent_make_stream_reset_event(
+ const struct sctp_association *asoc, __u16 flags,
+ __u16 stream_num, __u16 *stream_list, gfp_t gfp);
+
void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
struct msghdr *);
void sctp_ulpevent_read_rcvinfo(const struct sctp_ulpevent *event,
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 4401a40..97b8a96 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -491,21 +491,34 @@ struct sctp_sender_dry_event {
sctp_assoc_t sender_dry_assoc_id;
};
+#define SCTP_STREAM_RESET_INCOMING_SSN 0x0001
+#define SCTP_STREAM_RESET_OUTGOING_SSN 0x0002
+#define SCTP_STREAM_RESET_DENIED 0x0004
+#define SCTP_STREAM_RESET_FAILED 0x0008
+struct sctp_stream_reset_event {
+ uint16_t strreset_type;
+ uint16_t strreset_flags;
+ uint32_t strreset_length;
+ sctp_assoc_t strreset_assoc_id;
+ uint16_t strreset_stream_list[];
+};
+
/*
* Described in Section 7.3
* Ancillary Data and Notification Interest Options
*/
struct sctp_event_subscribe {
- __u8 sctp_data_io_event;
- __u8 sctp_association_event;
- __u8 sctp_address_event;
- __u8 sctp_send_failure_event;
- __u8 sctp_peer_error_event;
- __u8 sctp_shutdown_event;
- __u8 sctp_partial_delivery_event;
- __u8 sctp_adaptation_layer_event;
- __u8 sctp_authentication_event;
- __u8 sctp_sender_dry_event;
+ uint8_t sctp_data_io_event;
+ uint8_t sctp_association_event;
+ uint8_t sctp_address_event;
+ uint8_t sctp_send_failure_event;
+ uint8_t sctp_peer_error_event;
+ uint8_t sctp_shutdown_event;
+ uint8_t sctp_partial_delivery_event;
+ uint8_t sctp_adaptation_layer_event;
+ uint8_t sctp_authentication_event;
+ uint8_t sctp_sender_dry_event;
+ uint8_t sctp_stream_reset_event;
};
/*
@@ -530,6 +543,7 @@ union sctp_notification {
struct sctp_pdapi_event sn_pdapi_event;
struct sctp_authkey_event sn_authkey_event;
struct sctp_sender_dry_event sn_sender_dry_event;
+ struct sctp_stream_reset_event sn_strreset_event;
};
/* Section 5.3.1
@@ -557,6 +571,8 @@ enum sctp_sn_type {
#define SCTP_AUTHENTICATION_INDICATION SCTP_AUTHENTICATION_EVENT
SCTP_SENDER_DRY_EVENT,
#define SCTP_SENDER_DRY_EVENT SCTP_SENDER_DRY_EVENT
+ SCTP_STREAM_RESET_EVENT,
+#define SCTP_STREAM_RESET_EVENT SCTP_STREAM_RESET_EVENT
};
/* Notification error codes used to fill up the error fields in some
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index bea0005..490d573 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -854,6 +854,36 @@ struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
return event;
}
+struct sctp_ulpevent *sctp_ulpevent_make_stream_reset_event(
+ const struct sctp_association *asoc, __u16 flags, __u16 stream_num,
+ __u16 *stream_list, gfp_t gfp)
+{
+ struct sctp_stream_reset_event *sreset;
+ struct sctp_ulpevent *event;
+ struct sk_buff *skb;
+
+ event = sctp_ulpevent_new(sizeof(struct sctp_stream_reset_event) +
+ 2 * stream_num, MSG_NOTIFICATION, gfp);
+ if (!event)
+ return NULL;
+
+ skb = sctp_event2skb(event);
+ sreset = (struct sctp_stream_reset_event *)skb_put(skb,
+ sizeof(struct sctp_stream_reset_event) + 2 * stream_num);
+
+ sreset->strreset_type = SCTP_STREAM_RESET_EVENT;
+ sreset->strreset_flags = flags;
+ sreset->strreset_length = sizeof(struct sctp_stream_reset_event);
+ sctp_ulpevent_set_owner(event, asoc);
+ sreset->strreset_assoc_id = sctp_assoc2id(asoc);
+
+ if (stream_num)
+ memcpy(sreset->strreset_stream_list, stream_list,
+ 2 * stream_num);
+
+ return event;
+}
+
/* Return the notification type, assuming this is a notification
* event.
*/
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 16/27] sctp: add rfc6525 section 5.1.5-5.1.6 and 6.3.4
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Sender-Side Procedures for the Add
Outgoing and Incoming Streams Request Parameter described in
5.1.5-5.1.6.
It is also to add sockopt SCTP_ADD_STREAMS in section 6.3.4
for users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/uapi/linux/sctp.h | 7 +++
net/sctp/socket.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 121 insertions(+)
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index c1c77c8..4401a40 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -119,6 +119,7 @@ typedef __s32 sctp_assoc_t;
#define SCTP_ENABLE_STREAM_RESET 118
#define SCTP_RESET_STREAMS 119
#define SCTP_RESET_ASSOC 120
+#define SCTP_ADD_STREAMS 121
/* PR-SCTP policies */
#define SCTP_PR_SCTP_NONE 0x0000
@@ -1028,4 +1029,10 @@ struct sctp_reset_streams {
uint16_t srs_stream_list[]; /* list if srs_num_streams is not 0 */
};
+struct sctp_add_streams {
+ sctp_assoc_t sas_assoc_id;
+ uint16_t sas_instrms;
+ uint16_t sas_outstrms;
+};
+
#endif /* _UAPI_SCTP_H */
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index bcefc55..a4e8aac 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3968,6 +3968,117 @@ static int sctp_setsockopt_reset_assoc(struct sock *sk,
return retval;
}
+static int sctp_setsockopt_add_streams(struct sock *sk,
+ char __user *optval,
+ unsigned int optlen)
+{
+ struct sctp_association *asoc;
+ struct sctp_chunk *chunk = NULL;
+ struct sctp_add_streams params;
+ int retval = -EINVAL;
+ __u16 out, in;
+
+ if (optlen != sizeof(params))
+ goto out;
+
+ if (copy_from_user(¶ms, optval, optlen)) {
+ retval = -EFAULT;
+ goto out;
+ }
+
+ asoc = sctp_id2assoc(sk, params.sas_assoc_id);
+ if (!asoc)
+ goto out;
+
+ if (!asoc->peer.reconf_capable ||
+ !(asoc->strreset_enable & SCTP_ENABLE_CHANGE_ASSOC_REQ)) {
+ retval = -ENOPROTOOPT;
+ goto out;
+ }
+
+ if (asoc->strreset_outstanding) {
+ retval = -EINPROGRESS;
+ goto out;
+ }
+
+ out = params.sas_outstrms;
+ in = params.sas_instrms;
+
+ if (!out && !in)
+ goto out;
+
+ if (out) {
+ __u16 nums = asoc->streamoutcnt + out;
+
+ /* Check for overflow, can't use nums here */
+ if (asoc->streamoutcnt + out > SCTP_MAX_STREAM)
+ goto out;
+
+ /* Use ksize to check if stream array really needs to realloc */
+ if (ksize(asoc->streamout) / sizeof(*asoc->streamout) < nums) {
+ struct sctp_stream_out *streamout;
+
+ streamout = kcalloc(nums, sizeof(*streamout),
+ GFP_KERNEL);
+ if (!streamout) {
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(streamout, asoc->streamout,
+ sizeof(*streamout) * asoc->streamoutcnt);
+
+ kfree(asoc->streamout);
+ asoc->streamout = streamout;
+ }
+
+ asoc->streamoutcnt = nums;
+ }
+
+ if (in) {
+ __u16 nums = asoc->streamincnt + in;
+
+ if (asoc->streamincnt + in > SCTP_MAX_STREAM)
+ goto out;
+
+ if (ksize(asoc->streamin) / sizeof(*asoc->streamin) < nums) {
+ struct sctp_stream_in *streamin;
+
+ streamin = kcalloc(nums, sizeof(*streamin),
+ GFP_KERNEL);
+ if (!streamin) {
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(streamin, asoc->streamin,
+ sizeof(*streamin) * asoc->streamincnt);
+
+ kfree(asoc->streamin);
+ asoc->streamin = streamin;
+ }
+
+ asoc->streamincnt = nums;
+ }
+
+ chunk = sctp_make_strreset_addstrm(asoc, out, in);
+ if (!chunk)
+ goto out;
+
+ asoc->strreset_outstanding = !!out + !!in;
+ asoc->strreset_chunk = chunk;
+ sctp_chunk_hold(asoc->strreset_chunk);
+
+ retval = sctp_send_reconf(asoc, chunk);
+ if (retval) {
+ sctp_chunk_put(asoc->strreset_chunk);
+ asoc->strreset_chunk = NULL;
+ }
+
+out:
+ return retval;
+}
+
/* API 6.2 setsockopt(), getsockopt()
*
* Applications use setsockopt() and getsockopt() to set or retrieve
@@ -4146,6 +4257,9 @@ static int sctp_setsockopt(struct sock *sk, int level, int optname,
case SCTP_RESET_ASSOC:
retval = sctp_setsockopt_reset_assoc(sk, optval, optlen);
break;
+ case SCTP_ADD_STREAMS:
+ retval = sctp_setsockopt_add_streams(sk, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 15/27] sctp: add rfc6525 section 5.1.4 and 6.3.3
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement Sender-Side Procedures for the SSN/TSN
Reset Request Parameter descibed in section 5.1.4.
It is also to add sockopt SCTP_RESET_ASSOC in section 6.3.3 for
users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/uapi/linux/sctp.h | 1 +
net/sctp/socket.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 1f4518b..c1c77c8 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -118,6 +118,7 @@ typedef __s32 sctp_assoc_t;
#define SCTP_RECONFIG_SUPPORTED 117
#define SCTP_ENABLE_STREAM_RESET 118
#define SCTP_RESET_STREAMS 119
+#define SCTP_RESET_ASSOC 120
/* PR-SCTP policies */
#define SCTP_PR_SCTP_NONE 0x0000
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index e62872c..bcefc55 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3914,6 +3914,60 @@ static int sctp_setsockopt_reset_streams(struct sock *sk,
return retval;
}
+static int sctp_setsockopt_reset_assoc(struct sock *sk,
+ char __user *optval,
+ unsigned int optlen)
+{
+ struct sctp_association *asoc;
+ struct sctp_chunk *chunk = NULL;
+ sctp_assoc_t associd;
+ int retval = -EINVAL;
+ __u16 i;
+
+ if (optlen != sizeof(associd))
+ goto out;
+
+ if (copy_from_user(&associd, optval, optlen)) {
+ retval = -EFAULT;
+ goto out;
+ }
+
+ asoc = sctp_id2assoc(sk, associd);
+ if (!asoc)
+ goto out;
+
+ if (!asoc->peer.reconf_capable ||
+ !(asoc->strreset_enable & SCTP_ENABLE_RESET_ASSOC_REQ)) {
+ retval = -ENOPROTOOPT;
+ goto out;
+ }
+
+ if (asoc->strreset_outstanding) {
+ retval = -EINPROGRESS;
+ goto out;
+ }
+
+ chunk = sctp_make_strreset_tsnreq(asoc);
+ if (!chunk)
+ goto out;
+
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].state = SCTP_STREAM_CLOSED;
+
+ asoc->strreset_outstanding = 1;
+ asoc->strreset_chunk = chunk;
+ sctp_chunk_hold(asoc->strreset_chunk);
+
+ retval = sctp_send_reconf(asoc, chunk);
+ if (retval) {
+ sctp_chunk_put(asoc->strreset_chunk);
+ asoc->strreset_chunk = NULL;
+ }
+
+out:
+ return retval;
+}
+
/* API 6.2 setsockopt(), getsockopt()
*
* Applications use setsockopt() and getsockopt() to set or retrieve
@@ -4089,6 +4143,9 @@ static int sctp_setsockopt(struct sock *sk, int level, int optname,
case SCTP_RESET_STREAMS:
retval = sctp_setsockopt_reset_streams(sk, optval, optlen);
break;
+ case SCTP_RESET_ASSOC:
+ retval = sctp_setsockopt_reset_assoc(sk, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 14/27] sctp: add rfc6525 section 5.1.2-5.1.3 and 6.3.2
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to implement sender-side procedures for the Outgoing
and Incoming SSN Reset Request Parameter described in section 5.1.2
and 5.1.3.
It is also add sockopt SCTP_RESET_STREAMS in section 6.3.2 for users.
Note that the new asoc member strreset_outstanding is to make sure
only one reconf request chunk on the fly as section 5.1.1 demands.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/structs.h | 1 +
include/uapi/linux/sctp.h | 11 ++++++
net/sctp/outqueue.c | 33 +++++++++++-----
net/sctp/socket.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 132 insertions(+), 10 deletions(-)
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 56282a3..ce8985f 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1861,6 +1861,7 @@ struct sctp_association {
reconf_enable:1;
__u8 strreset_enable;
+ __u8 strreset_outstanding; /* request param count on the fly */
/* stream arrays */
struct sctp_stream_out *streamout;
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 950d76a..1f4518b 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -117,6 +117,7 @@ typedef __s32 sctp_assoc_t;
#define SCTP_PR_ASSOC_STATUS 115
#define SCTP_RECONFIG_SUPPORTED 117
#define SCTP_ENABLE_STREAM_RESET 118
+#define SCTP_RESET_STREAMS 119
/* PR-SCTP policies */
#define SCTP_PR_SCTP_NONE 0x0000
@@ -146,6 +147,9 @@ typedef __s32 sctp_assoc_t;
#define SCTP_ENABLE_CHANGE_ASSOC_REQ 0x04
#define SCTP_ENABLE_STRRESET_MASK 0x07
+#define SCTP_STREAM_RESET_INCOMING 0x01
+#define SCTP_STREAM_RESET_OUTGOING 0x02
+
/* These are bit fields for msghdr->msg_flags. See section 5.1. */
/* On user space Linux, these live in <bits/socket.h> as an enum. */
enum sctp_msg_flags {
@@ -1016,4 +1020,11 @@ struct sctp_info {
__u32 __reserved3;
};
+struct sctp_reset_streams {
+ sctp_assoc_t srs_assoc_id;
+ uint16_t srs_flags;
+ uint16_t srs_number_streams; /* 0 == ALL */
+ uint16_t srs_stream_list[]; /* list if srs_num_streams is not 0 */
+};
+
#endif /* _UAPI_SCTP_H */
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index e540826..5d668c9 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -915,22 +915,28 @@ static void sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp)
case SCTP_CID_ECN_ECNE:
case SCTP_CID_ASCONF:
case SCTP_CID_FWD_TSN:
+ case SCTP_CID_RECONF:
status = sctp_packet_transmit_chunk(packet, chunk,
one_packet, gfp);
if (status != SCTP_XMIT_OK) {
/* put the chunk back */
list_add(&chunk->list, &q->control_chunk_list);
- } else {
- asoc->stats.octrlchunks++;
- /* PR-SCTP C5) If a FORWARD TSN is sent, the
- * sender MUST assure that at least one T3-rtx
- * timer is running.
- */
- if (chunk->chunk_hdr->type == SCTP_CID_FWD_TSN) {
- sctp_transport_reset_t3_rtx(transport);
- transport->last_time_sent = jiffies;
- }
+ break;
+ }
+
+ asoc->stats.octrlchunks++;
+ /* PR-SCTP C5) If a FORWARD TSN is sent, the
+ * sender MUST assure that at least one T3-rtx
+ * timer is running.
+ */
+ if (chunk->chunk_hdr->type == SCTP_CID_FWD_TSN) {
+ sctp_transport_reset_t3_rtx(transport);
+ transport->last_time_sent = jiffies;
}
+
+ if (chunk == asoc->strreset_chunk)
+ sctp_transport_reset_reconf_timer(transport);
+
break;
default:
@@ -1016,6 +1022,8 @@ static void sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp)
/* Finally, transmit new packets. */
while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
+ __u32 sid = ntohs(chunk->subh.data_hdr->stream);
+
/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
* stream identifier.
*/
@@ -1038,6 +1046,11 @@ static void sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp)
continue;
}
+ if (asoc->streamout[sid].state == SCTP_STREAM_CLOSED) {
+ sctp_outq_head_data(q, chunk);
+ goto sctp_flush_out;
+ }
+
/* If there is a specified transport, use it.
* Otherwise, we want to use the active path.
*/
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 3cae585..e62872c 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -434,6 +434,19 @@ static int sctp_send_asconf(struct sctp_association *asoc,
return retval;
}
+static int sctp_send_reconf(struct sctp_association *asoc,
+ struct sctp_chunk *chunk)
+{
+ struct net *net = sock_net(asoc->base.sk);
+ int retval = 0;
+
+ retval = sctp_primitive_RECONF(net, asoc, chunk);
+ if (retval)
+ sctp_chunk_free(chunk);
+
+ return retval;
+}
+
/* Add a list of addresses as bind addresses to local endpoint or
* association.
*
@@ -3820,6 +3833,87 @@ static int sctp_setsockopt_enable_strreset(struct sock *sk,
return retval;
}
+static int sctp_setsockopt_reset_streams(struct sock *sk,
+ char __user *optval,
+ unsigned int optlen)
+{
+ struct sctp_reset_streams *params;
+ struct sctp_association *asoc;
+ struct sctp_chunk *chunk = NULL;
+ __u16 i, str_nums, *str_list;
+ int retval = -EINVAL;
+ bool out, in;
+
+ if (optlen < sizeof(struct sctp_reset_streams))
+ return -EINVAL;
+
+ params = memdup_user(optval, optlen);
+ if (IS_ERR(params)) {
+ retval = PTR_ERR(params);
+ goto out;
+ }
+
+ asoc = sctp_id2assoc(sk, params->srs_assoc_id);
+ if (!asoc)
+ goto out;
+
+ if (!asoc->peer.reconf_capable ||
+ !(asoc->strreset_enable & SCTP_ENABLE_RESET_STREAM_REQ)) {
+ retval = -ENOPROTOOPT;
+ goto out;
+ }
+
+ if (asoc->strreset_outstanding) {
+ retval = -EINPROGRESS;
+ goto out;
+ }
+
+ out = params->srs_flags & SCTP_STREAM_RESET_OUTGOING;
+ in = params->srs_flags & SCTP_STREAM_RESET_INCOMING;
+ if (!out && !in)
+ goto out;
+
+ str_nums = params->srs_number_streams;
+ str_list = params->srs_stream_list;
+ if (out && str_nums)
+ for (i = 0; i < str_nums; i++)
+ if (str_list[i] >= asoc->streamoutcnt)
+ goto out;
+
+ if (in && str_nums)
+ for (i = 0; i < str_nums; i++)
+ if (str_list[i] >= asoc->streamincnt)
+ goto out;
+
+ chunk = sctp_make_strreset_req(asoc, str_nums, str_list, out, in);
+ if (!chunk)
+ goto out;
+
+ if (out) {
+ if (str_nums)
+ for (i = 0; i < str_nums; i++)
+ asoc->streamout[str_list[i]].state =
+ SCTP_STREAM_CLOSED;
+ else
+ for (i = 0; i < asoc->streamoutcnt; i++)
+ asoc->streamout[i].state = SCTP_STREAM_CLOSED;
+ }
+
+ asoc->strreset_outstanding = out + in;
+ asoc->strreset_chunk = chunk;
+ sctp_chunk_hold(asoc->strreset_chunk);
+
+ retval = sctp_send_reconf(asoc, chunk);
+ if (retval) {
+ sctp_chunk_put(asoc->strreset_chunk);
+ asoc->strreset_chunk = NULL;
+ }
+
+out:
+ kfree(params);
+ return retval;
+}
+
/* API 6.2 setsockopt(), getsockopt()
*
* Applications use setsockopt() and getsockopt() to set or retrieve
@@ -3992,6 +4086,9 @@ static int sctp_setsockopt(struct sock *sk, int level, int optname,
case SCTP_ENABLE_STREAM_RESET:
retval = sctp_setsockopt_enable_strreset(sk, optval, optlen);
break;
+ case SCTP_RESET_STREAMS:
+ retval = sctp_setsockopt_reset_streams(sk, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 13/27] sctp: add rfc6525 section 6.3.1
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add sockopt SCTP_ENABLE_STREAM_RESET to set
strreset_enable to indicate which reconf request type it supports,
which is described in section 6.3.1.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/sctp/structs.h | 4 +++
include/uapi/linux/sctp.h | 7 ++++
net/sctp/associola.c | 1 +
net/sctp/socket.c | 84 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 96 insertions(+)
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 7c46398..56282a3 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1253,6 +1253,8 @@ struct sctp_endpoint {
__u8 auth_enable:1,
prsctp_enable:1,
reconf_enable:1;
+
+ __u8 strreset_enable;
};
/* Recover the outter endpoint structure. */
@@ -1858,6 +1860,8 @@ struct sctp_association {
prsctp_enable:1,
reconf_enable:1;
+ __u8 strreset_enable;
+
/* stream arrays */
struct sctp_stream_out *streamout;
struct sctp_stream_in *streamin;
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 4d3b621..950d76a 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -116,6 +116,7 @@ typedef __s32 sctp_assoc_t;
#define SCTP_DEFAULT_PRINFO 114
#define SCTP_PR_ASSOC_STATUS 115
#define SCTP_RECONFIG_SUPPORTED 117
+#define SCTP_ENABLE_STREAM_RESET 118
/* PR-SCTP policies */
#define SCTP_PR_SCTP_NONE 0x0000
@@ -139,6 +140,12 @@ typedef __s32 sctp_assoc_t;
#define SCTP_PR_RTX_ENABLED(x) (SCTP_PR_POLICY(x) == SCTP_PR_SCTP_RTX)
#define SCTP_PR_PRIO_ENABLED(x) (SCTP_PR_POLICY(x) == SCTP_PR_SCTP_PRIO)
+/* For enable stream reset */
+#define SCTP_ENABLE_RESET_STREAM_REQ 0x01
+#define SCTP_ENABLE_RESET_ASSOC_REQ 0x02
+#define SCTP_ENABLE_CHANGE_ASSOC_REQ 0x04
+#define SCTP_ENABLE_STRRESET_MASK 0x07
+
/* These are bit fields for msghdr->msg_flags. See section 5.1. */
/* On user space Linux, these live in <bits/socket.h> as an enum. */
enum sctp_msg_flags {
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index ab43cb6..44b8690 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -271,6 +271,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
asoc->active_key_id = ep->active_key_id;
asoc->prsctp_enable = ep->prsctp_enable;
asoc->reconf_enable = ep->reconf_enable;
+ asoc->strreset_enable = ep->strreset_enable;
/* Save the hmacs and chunks list into this association */
if (ep->auth_hmacs_list)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index e946bc2..3cae585 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3784,6 +3784,42 @@ static int sctp_setsockopt_reconfig_supported(struct sock *sk,
return retval;
}
+static int sctp_setsockopt_enable_strreset(struct sock *sk,
+ char __user *optval,
+ unsigned int optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_association *asoc;
+ int retval = -EINVAL;
+
+ if (optlen != sizeof(params))
+ goto out;
+
+ if (copy_from_user(¶ms, optval, optlen)) {
+ retval = -EFAULT;
+ goto out;
+ }
+
+ if (params.assoc_value & (~SCTP_ENABLE_STRRESET_MASK))
+ goto out;
+
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (asoc) {
+ asoc->strreset_enable = params.assoc_value;
+ } else if (!params.assoc_id) {
+ struct sctp_sock *sp = sctp_sk(sk);
+
+ sp->ep->strreset_enable = params.assoc_value;
+ } else {
+ goto out;
+ }
+
+ retval = 0;
+
+out:
+ return retval;
+}
+
/* API 6.2 setsockopt(), getsockopt()
*
* Applications use setsockopt() and getsockopt() to set or retrieve
@@ -3953,6 +3989,9 @@ static int sctp_setsockopt(struct sock *sk, int level, int optname,
case SCTP_RECONFIG_SUPPORTED:
retval = sctp_setsockopt_reconfig_supported(sk, optval, optlen);
break;
+ case SCTP_ENABLE_STREAM_RESET:
+ retval = sctp_setsockopt_enable_strreset(sk, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
@@ -6478,6 +6517,47 @@ static int sctp_getsockopt_reconfig_supported(struct sock *sk, int len,
return retval;
}
+static int sctp_getsockopt_enable_strreset(struct sock *sk, int len,
+ char __user *optval,
+ int __user *optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_association *asoc;
+ int retval = -EFAULT;
+
+ if (len < sizeof(params)) {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ len = sizeof(params);
+ if (copy_from_user(¶ms, optval, len))
+ goto out;
+
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (asoc) {
+ params.assoc_value = asoc->strreset_enable;
+ } else if (!params.assoc_id) {
+ struct sctp_sock *sp = sctp_sk(sk);
+
+ params.assoc_value = sp->ep->strreset_enable;
+ } else {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ if (put_user(len, optlen))
+ goto out;
+
+ if (copy_to_user(optval, ¶ms, len))
+ goto out;
+
+ retval = 0;
+
+out:
+ return retval;
+}
+
static int sctp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
@@ -6649,6 +6729,10 @@ static int sctp_getsockopt(struct sock *sk, int level, int optname,
retval = sctp_getsockopt_reconfig_supported(sk, len, optval,
optlen);
break;
+ case SCTP_ENABLE_STREAM_RESET:
+ retval = sctp_getsockopt_enable_strreset(sk, len, optval,
+ optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 12/27] sctp: add get and set sockopt for reconf_enable
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patchset is to add SCTP_RECONFIG_SUPPORTED sockopt, it would
set and get asoc reconf_enable value when asoc_id is set, or it
would set and get ep reconf_enalbe value if asoc_id is 0.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/uapi/linux/sctp.h | 1 +
net/sctp/socket.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index a406adc..4d3b621 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -115,6 +115,7 @@ typedef __s32 sctp_assoc_t;
#define SCTP_PR_SUPPORTED 113
#define SCTP_DEFAULT_PRINFO 114
#define SCTP_PR_ASSOC_STATUS 115
+#define SCTP_RECONFIG_SUPPORTED 117
/* PR-SCTP policies */
#define SCTP_PR_SCTP_NONE 0x0000
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 318c678..e946bc2 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3751,6 +3751,39 @@ static int sctp_setsockopt_default_prinfo(struct sock *sk,
return retval;
}
+static int sctp_setsockopt_reconfig_supported(struct sock *sk,
+ char __user *optval,
+ unsigned int optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_association *asoc;
+ int retval = -EINVAL;
+
+ if (optlen != sizeof(params))
+ goto out;
+
+ if (copy_from_user(¶ms, optval, optlen)) {
+ retval = -EFAULT;
+ goto out;
+ }
+
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (asoc) {
+ asoc->reconf_enable = !!params.assoc_value;
+ } else if (!params.assoc_id) {
+ struct sctp_sock *sp = sctp_sk(sk);
+
+ sp->ep->reconf_enable = !!params.assoc_value;
+ } else {
+ goto out;
+ }
+
+ retval = 0;
+
+out:
+ return retval;
+}
+
/* API 6.2 setsockopt(), getsockopt()
*
* Applications use setsockopt() and getsockopt() to set or retrieve
@@ -3917,6 +3950,9 @@ static int sctp_setsockopt(struct sock *sk, int level, int optname,
case SCTP_DEFAULT_PRINFO:
retval = sctp_setsockopt_default_prinfo(sk, optval, optlen);
break;
+ case SCTP_RECONFIG_SUPPORTED:
+ retval = sctp_setsockopt_reconfig_supported(sk, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
@@ -6401,6 +6437,47 @@ static int sctp_getsockopt_pr_assocstatus(struct sock *sk, int len,
return retval;
}
+static int sctp_getsockopt_reconfig_supported(struct sock *sk, int len,
+ char __user *optval,
+ int __user *optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_association *asoc;
+ int retval = -EFAULT;
+
+ if (len < sizeof(params)) {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ len = sizeof(params);
+ if (copy_from_user(¶ms, optval, len))
+ goto out;
+
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (asoc) {
+ params.assoc_value = asoc->reconf_enable;
+ } else if (!params.assoc_id) {
+ struct sctp_sock *sp = sctp_sk(sk);
+
+ params.assoc_value = sp->ep->reconf_enable;
+ } else {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ if (put_user(len, optlen))
+ goto out;
+
+ if (copy_to_user(optval, ¶ms, len))
+ goto out;
+
+ retval = 0;
+
+out:
+ return retval;
+}
+
static int sctp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
@@ -6568,6 +6645,10 @@ static int sctp_getsockopt(struct sock *sk, int level, int optname,
retval = sctp_getsockopt_pr_assocstatus(sk, len, optval,
optlen);
break;
+ case SCTP_RECONFIG_SUPPORTED:
+ retval = sctp_getsockopt_reconfig_supported(sk, len, optval,
+ optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
--
2.1.0
^ permalink raw reply related
* [PATCH net-next 11/27] sctp: add reconf_enable in asoc ep and netns
From: Xin Long @ 2017-01-01 11:20 UTC (permalink / raw)
To: network dev, linux-sctp; +Cc: Marcelo Ricardo Leitner, Neil Horman, davem
In-Reply-To: <cover.1483269426.git.lucien.xin@gmail.com>
This patch is to add reconf_enable field in all of asoc ep and netns
to indicate if they support stream reset.
When initializing, asoc reconf_enable get the default value from ep
reconf_enable which is from netns netns reconf_enable by default.
It is also to add reconf_capable in asoc peer part to know if peer
supports reconf_enable, the value is set if ext params have reconf
chunk support when processing init chunk, just as rfc6525 section
5.1.1 demands.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
include/net/netns/sctp.h | 3 +++
include/net/sctp/structs.h | 7 +++++--
net/sctp/associola.c | 1 +
net/sctp/endpointola.c | 1 +
net/sctp/sm_make_chunk.c | 15 +++++++++++++++
net/sctp/sysctl.c | 7 +++++++
6 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/include/net/netns/sctp.h b/include/net/netns/sctp.h
index c501d67..b7871d0 100644
--- a/include/net/netns/sctp.h
+++ b/include/net/netns/sctp.h
@@ -118,6 +118,9 @@ struct netns_sctp {
/* Flag to indicate if PR-SCTP is enabled. */
int prsctp_enable;
+ /* Flag to indicate if PR-CONFIG is enabled. */
+ int reconf_enable;
+
/* Flag to idicate if SCTP-AUTH is enabled */
int auth_enable;
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index bb18990..7c46398 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1251,7 +1251,8 @@ struct sctp_endpoint {
struct list_head endpoint_shared_keys;
__u16 active_key_id;
__u8 auth_enable:1,
- prsctp_enable:1;
+ prsctp_enable:1,
+ reconf_enable:1;
};
/* Recover the outter endpoint structure. */
@@ -1497,6 +1498,7 @@ struct sctp_association {
hostname_address:1, /* Peer understands DNS addresses? */
asconf_capable:1, /* Does peer support ADDIP? */
prsctp_capable:1, /* Can peer do PR-SCTP? */
+ reconf_capable:1, /* Can peer do RE-CONFIG? */
auth_capable:1; /* Is peer doing SCTP-AUTH? */
/* sack_needed : This flag indicates if the next received
@@ -1853,7 +1855,8 @@ struct sctp_association {
__u8 need_ecne:1, /* Need to send an ECNE Chunk? */
temp:1, /* Is it a temporary association? */
- prsctp_enable:1;
+ prsctp_enable:1,
+ reconf_enable:1;
/* stream arrays */
struct sctp_stream_out *streamout;
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 7acfdad..ab43cb6 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -270,6 +270,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
asoc->active_key_id = ep->active_key_id;
asoc->prsctp_enable = ep->prsctp_enable;
+ asoc->reconf_enable = ep->reconf_enable;
/* Save the hmacs and chunks list into this association */
if (ep->auth_hmacs_list)
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index 410ddc1..8c58923 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -164,6 +164,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
ep->auth_hmacs_list = auth_hmacs;
ep->auth_chunk_list = auth_chunks;
ep->prsctp_enable = net->sctp.prsctp_enable;
+ ep->reconf_enable = net->sctp.reconf_enable;
return ep;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 102e816..f1efba6 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -270,6 +270,11 @@ struct sctp_chunk *sctp_make_init(const struct sctp_association *asoc,
num_ext += 2;
}
+ if (asoc->reconf_enable) {
+ extensions[num_ext] = SCTP_CID_RECONF;
+ num_ext += 1;
+ }
+
if (sp->adaptation_ind)
chunksize += sizeof(aiparam);
@@ -434,6 +439,11 @@ struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc,
num_ext += 2;
}
+ if (asoc->peer.reconf_capable) {
+ extensions[num_ext] = SCTP_CID_RECONF;
+ num_ext += 1;
+ }
+
if (sp->adaptation_ind)
chunksize += sizeof(aiparam);
@@ -2010,6 +2020,11 @@ static void sctp_process_ext_param(struct sctp_association *asoc,
for (i = 0; i < num_ext; i++) {
switch (param.ext->chunks[i]) {
+ case SCTP_CID_RECONF:
+ if (asoc->reconf_enable &&
+ !asoc->peer.reconf_capable)
+ asoc->peer.reconf_capable = 1;
+ break;
case SCTP_CID_FWD_TSN:
if (asoc->prsctp_enable && !asoc->peer.prsctp_capable)
asoc->peer.prsctp_capable = 1;
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index daf8554..0e732f6 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -275,6 +275,13 @@ static struct ctl_table sctp_net_table[] = {
.proc_handler = proc_dointvec,
},
{
+ .procname = "reconf_enable",
+ .data = &init_net.sctp.reconf_enable,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+ {
.procname = "auth_enable",
.data = &init_net.sctp.auth_enable,
.maxlen = sizeof(int),
--
2.1.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox