* Re: [PATCH stable v1 00/13] net: ethernet: aquantia: Add AQtion 2.5/5 GB NIC driver
From: David Miller @ 2017-01-29 18:34 UTC (permalink / raw)
To: Alexander.Loktionov
Cc: netdev, vomlehn, Simon.Edelhaus, Dmitrii.Tarakanov, Pavel.Belous
In-Reply-To: <cover.1485665881.git.vomlehn@texas.net>
We do not add new drivers to the -stable trees.
It is for bug fixes only.
^ permalink raw reply
* Re: [PATCHv3 net-next 3/4] sctp: add support for generating stream reconf add incoming/outgoing streams request chunk
From: David Miller @ 2017-01-29 18:41 UTC (permalink / raw)
To: marcelo.leitner
Cc: David.Laight, lucien.xin, netdev, linux-sctp, nhorman, vyasevich
In-Reply-To: <20170129143117.GK3781@localhost.localdomain>
From: marcelo.leitner@gmail.com
Date: Sun, 29 Jan 2017 12:31:17 -0200
> On Mon, Jan 23, 2017 at 10:58:10AM -0500, David Miller wrote:
>> If this is "so critical" for end to end communication, why the heck
>> do you not see __packed sprinkled all over our definitions for IPV4,
>> IPV6, TCP, UDP, etc. headers?
>>
>> Do you know why? Because it's completely unnecessary...
>
> Btw, virtually all sctp headers are currently tagged with __packed,
> since forever.
...
> I'm reviewing them all and will probably post a patch to remove them.
Thanks.
^ permalink raw reply
* Re: [PATCH net-next v2 0/2] gtp: simple gtp improvements
From: David Miller @ 2017-01-29 18:56 UTC (permalink / raw)
To: aschultz; +Cc: pablo, netdev, Lionel.Gauthier, openbsc, laforge, elfring
In-Reply-To: <20170126152149.3284-1-aschultz@tpip.net>
From: Andreas Schultz <aschultz@tpip.net>
Date: Thu, 26 Jan 2017 16:21:47 +0100
> This is the part of the previous "simple gtp improvements" series
> that Pablo indicated should go into net-next.
>
> The rcu_lock removal is small correctness changes. Passing invalid
> to user space allows for more standards compliant handling of invalid
> tunnels.
Series applied, thanks.
^ permalink raw reply
* Re: [PATCHv2 RFC net-next 4/7] tcp: replace dst_confirm with sk_dst_confirm
From: Eric Dumazet @ 2017-01-29 19:27 UTC (permalink / raw)
To: Julian Anastasov; +Cc: netdev, linux-sctp, YueHaibing
In-Reply-To: <1485613578-19973-5-git-send-email-ja@ssi.bg>
On Sat, 2017-01-28 at 16:26 +0200, Julian Anastasov wrote:
> When same struct dst_entry can be used for many different
> neighbours we can not use it for pending confirmations.
> Use the new sk_dst_confirm() helper to propagate the
> indication from received packets to sock_confirm_neigh().
>
> Reported-by: YueHaibing <yuehaibing@huawei.com>
> Fixes: 5110effee8fd ("net: Do delayed neigh confirmation.")
> Fixes: f2bb4bedf35d ("ipv4: Cache output routes in fib_info nexthops.")
> Signed-off-by: Julian Anastasov <ja@ssi.bg>
> ---
For the whole series,
Acked-by: Eric Dumazet <edumazet@google.com>
Thanks !
^ permalink raw reply
* [PATCH net-next v3 4/4] net: dsa: bcm_sf2: Add support for port mirroring
From: Florian Fainelli @ 2017-01-29 19:29 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, cphealy, jiri, Florian Fainelli
In-Reply-To: <20170129192910.6069-1-f.fainelli@gmail.com>
We can use b53_mirror_add and b53_mirror_del because the Starfighter 2
is register compatible in that specific case.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8eecfd227e06..3e514d7af218 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1036,6 +1036,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
.port_fdb_dump = b53_fdb_dump,
.port_fdb_add = b53_fdb_add,
.port_fdb_del = b53_fdb_del,
+ .port_mirror_add = b53_mirror_add,
+ .port_mirror_del = b53_mirror_del,
};
struct bcm_sf2_of_data {
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 2/4] net: dsa: b53: Add mirror capture register definitions
From: Florian Fainelli @ 2017-01-29 19:29 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, cphealy, jiri, Florian Fainelli
In-Reply-To: <20170129192910.6069-1-f.fainelli@gmail.com>
Add definitions for the different Roboswitch registers relevant for
ingress and egress mirroring.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_regs.h | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index dac0af4e2cd0..9fd24c418fa4 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -206,6 +206,38 @@
#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */
#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */
+/* Mirror capture control register (16 bit) */
+#define B53_MIR_CAP_CTL 0x10
+#define CAP_PORT_MASK 0xf
+#define BLK_NOT_MIR BIT(14)
+#define MIRROR_EN BIT(15)
+
+/* Ingress mirror control register (16 bit) */
+#define B53_IG_MIR_CTL 0x12
+#define MIRROR_MASK 0x1ff
+#define DIV_EN BIT(13)
+#define MIRROR_FILTER_MASK 0x3
+#define MIRROR_FILTER_SHIFT 14
+#define MIRROR_ALL 0
+#define MIRROR_DA 1
+#define MIRROR_SA 2
+
+/* Ingress mirror divider register (16 bit) */
+#define B53_IG_MIR_DIV 0x14
+#define IN_MIRROR_DIV_MASK 0x3ff
+
+/* Ingress mirror MAC address register (48 bit) */
+#define B53_IG_MIR_MAC 0x16
+
+/* Egress mirror control register (16 bit) */
+#define B53_EG_MIR_CTL 0x1C
+
+/* Egress mirror divider register (16 bit) */
+#define B53_EG_MIR_DIV 0x1E
+
+/* Egress mirror MAC address register (48 bit) */
+#define B53_EG_MIR_MAC 0x20
+
/* Device ID register (8 or 32 bit) */
#define B53_DEVICE_ID 0x30
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 3/4] net: dsa: b53: Add support for port mirroring
From: Florian Fainelli @ 2017-01-29 19:29 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, cphealy, jiri, Florian Fainelli
In-Reply-To: <20170129192910.6069-1-f.fainelli@gmail.com>
Add support for configuring port mirroring through the cls_matchall
classifier. We do a full ingress or egress capture towards the capture
port. Future improvements could include leveraging the divider to allow
less frames to be captured, as well as matching specific MAC DA/SA.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 67 ++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/b53/b53_priv.h | 4 +++
2 files changed, 71 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index bb210b12ad1b..052ff4c22667 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1453,6 +1453,71 @@ static enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds)
return DSA_TAG_PROTO_NONE;
}
+int b53_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
+{
+ struct b53_device *dev = ds->priv;
+ u16 reg, loc;
+
+ if (ingress)
+ loc = B53_IG_MIR_CTL;
+ else
+ loc = B53_EG_MIR_CTL;
+
+ b53_read16(dev, B53_MGMT_PAGE, loc, ®);
+ reg &= ~MIRROR_MASK;
+ reg |= BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, loc, reg);
+
+ b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
+ reg &= ~CAP_PORT_MASK;
+ reg |= mirror->to_local_port;
+ reg |= MIRROR_EN;
+ b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_mirror_add);
+
+void b53_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct b53_device *dev = ds->priv;
+ bool loc_disable = false, other_loc_disable = false;
+ u16 reg, loc;
+
+ if (mirror->ingress)
+ loc = B53_IG_MIR_CTL;
+ else
+ loc = B53_EG_MIR_CTL;
+
+ /* Update the desired ingress/egress register */
+ b53_read16(dev, B53_MGMT_PAGE, loc, ®);
+ reg &= ~BIT(port);
+ if (!(reg & MIRROR_MASK))
+ loc_disable = true;
+ b53_write16(dev, B53_MGMT_PAGE, loc, reg);
+
+ /* Now look at the other one to know if we can disable mirroring
+ * entirely
+ */
+ if (mirror->ingress)
+ b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®);
+ else
+ b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®);
+ if (!(reg & MIRROR_MASK))
+ other_loc_disable = true;
+
+ b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®);
+ /* Both no longer have ports, let's disable mirroring */
+ if (loc_disable && other_loc_disable) {
+ reg &= ~MIRROR_EN;
+ reg &= ~mirror->to_local_port;
+ }
+ b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+}
+EXPORT_SYMBOL(b53_mirror_del);
+
static const struct dsa_switch_ops b53_switch_ops = {
.get_tag_protocol = b53_get_tag_protocol,
.setup = b53_setup,
@@ -1477,6 +1542,8 @@ static const struct dsa_switch_ops b53_switch_ops = {
.port_fdb_dump = b53_fdb_dump,
.port_fdb_add = b53_fdb_add,
.port_fdb_del = b53_fdb_del,
+ .port_mirror_add = b53_mirror_add,
+ .port_mirror_del = b53_mirror_del,
};
struct b53_chip_data {
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index a8031b382c55..28ffe255276f 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -408,5 +408,9 @@ int b53_fdb_del(struct dsa_switch *ds, int port,
int b53_fdb_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_fdb *fdb,
int (*cb)(struct switchdev_obj *obj));
+int b53_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
+void b53_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
#endif
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 0/4] net: dsa: Port mirroring support
From: Florian Fainelli @ 2017-01-29 19:29 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, cphealy, jiri, Florian Fainelli
Hi all,
This patch series adds support for port mirroring in the two
Broadcom switch drivers. The major part of the functional are actually with
the plumbing between tc and the drivers.
David, this will most likely conflict a little bit with my other series:
net: dsa: bcm_sf2: CFP support, so just let me know if that happens, and
I will provide a rebased version. Thanks!
Changes in v3:
- removed multiline comments from added structures
- simplify error handling in dsa_slave_add_cls_matchall
Changes in v2:
- fixed filter removal logic to disable the ingress or egress mirroring
when there are no longer ports being monitored in ingress or egress
- removed a stray list_head in dsa_port structure that is not used
Tested using the two iproute2 examples:
# ingress
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff: \
matchall skip_sw \
action mirred egress mirror \
dev eth2
# egress
tc qdisc add dev eth1 handle 1: root prio
tc filter add dev eth1 parent 1: \
matchall skip_sw \
action mirred egress mirror \
dev eth2
Florian Fainelli (4):
net: dsa: Add plumbing for port mirroring
net: dsa: b53: Add mirror capture register definitions
net: dsa: b53: Add support for port mirroring
net: dsa: bcm_sf2: Add support for port mirroring
drivers/net/dsa/b53/b53_common.c | 67 +++++++++++++++++++
drivers/net/dsa/b53/b53_priv.h | 4 ++
drivers/net/dsa/b53/b53_regs.h | 32 ++++++++++
drivers/net/dsa/bcm_sf2.c | 2 +
include/net/dsa.h | 33 ++++++++++
net/dsa/dsa_priv.h | 3 +
net/dsa/slave.c | 135 ++++++++++++++++++++++++++++++++++++++-
7 files changed, 275 insertions(+), 1 deletion(-)
--
2.9.3
^ permalink raw reply
* Re: [PATCH net-next v3 0/4] net: dsa: Port mirroring support
From: Florian Fainelli @ 2017-01-29 19:46 UTC (permalink / raw)
To: netdev, davem; +Cc: andrew, vivien.didelot, cphealy, jiri
In-Reply-To: <20170129192910.6069-1-f.fainelli@gmail.com>
On 01/29/2017 11:29 AM, Florian Fainelli wrote:
> Hi all,
>
> This patch series adds support for port mirroring in the two
> Broadcom switch drivers. The major part of the functional are actually with
> the plumbing between tc and the drivers.
>
> David, this will most likely conflict a little bit with my other series:
> net: dsa: bcm_sf2: CFP support, so just let me know if that happens, and
> I will provide a rebased version. Thanks!
David, not sure why but patch 1 does not want to show up on patchwork,
and cross checking with spinics.net it's not on netdev@vger.kernel.org
either... you should have it in your inbox hopefully. git send-email did
return it was sent correctly. Let me know if you need me to resend the
whole series. Thanks!
>
> Changes in v3:
>
> - removed multiline comments from added structures
> - simplify error handling in dsa_slave_add_cls_matchall
>
> Changes in v2:
>
> - fixed filter removal logic to disable the ingress or egress mirroring
> when there are no longer ports being monitored in ingress or egress
>
> - removed a stray list_head in dsa_port structure that is not used
>
> Tested using the two iproute2 examples:
>
> # ingress
> tc qdisc add dev eth1 handle ffff: ingress
> tc filter add dev eth1 parent ffff: \
> matchall skip_sw \
> action mirred egress mirror \
> dev eth2
> # egress
> tc qdisc add dev eth1 handle 1: root prio
> tc filter add dev eth1 parent 1: \
> matchall skip_sw \
> action mirred egress mirror \
> dev eth2
>
>
> Florian Fainelli (4):
> net: dsa: Add plumbing for port mirroring
> net: dsa: b53: Add mirror capture register definitions
> net: dsa: b53: Add support for port mirroring
> net: dsa: bcm_sf2: Add support for port mirroring
>
> drivers/net/dsa/b53/b53_common.c | 67 +++++++++++++++++++
> drivers/net/dsa/b53/b53_priv.h | 4 ++
> drivers/net/dsa/b53/b53_regs.h | 32 ++++++++++
> drivers/net/dsa/bcm_sf2.c | 2 +
> include/net/dsa.h | 33 ++++++++++
> net/dsa/dsa_priv.h | 3 +
> net/dsa/slave.c | 135 ++++++++++++++++++++++++++++++++++++++-
> 7 files changed, 275 insertions(+), 1 deletion(-)
>
--
Florian
^ permalink raw reply
* [PATCH net-next v3 1/4] net: dsa: Add plumbing for port mirroring
From: Florian Fainelli @ 2017-01-29 19:43 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, cphealy, jiri, Florian Fainelli
In-Reply-To: <20170129192910.6069-1-f.fainelli@gmail.com>
Add necessary plumbing at the slave network device level to have switch
drivers implement ndo_setup_tc() and most particularly the cls_matchall
classifier. We add support for two switch operations:
port_add_mirror and port_del_mirror() which configure, on a per-port
basis the mirror parameters requested from the cls_matchall classifier.
Code is largely borrowed from the Mellanox Spectrum switch driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/net/dsa.h | 33 +++++++++++++
net/dsa/dsa_priv.h | 3 ++
net/dsa/slave.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 170 insertions(+), 1 deletion(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 92fd795e9573..9835bd9054f3 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -20,6 +20,8 @@
#include <linux/phy_fixed.h>
#include <linux/ethtool.h>
+struct tc_action;
+
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = 0,
DSA_TAG_PROTO_DSA,
@@ -139,6 +141,28 @@ struct dsa_switch_tree {
const struct dsa_device_ops *tag_ops;
};
+/* TC matchall action types, only mirroring for now */
+enum dsa_port_mall_action_type {
+ DSA_PORT_MALL_MIRROR,
+};
+
+/* TC mirroring entry */
+struct dsa_mall_mirror_tc_entry {
+ u8 to_local_port;
+ bool ingress;
+};
+
+/* TC matchall entry */
+struct dsa_mall_tc_entry {
+ struct list_head list;
+ unsigned long cookie;
+ enum dsa_port_mall_action_type type;
+ union {
+ struct dsa_mall_mirror_tc_entry mirror;
+ };
+};
+
+
struct dsa_port {
struct net_device *netdev;
struct device_node *dn;
@@ -370,6 +394,15 @@ struct dsa_switch_ops {
int (*port_mdb_dump)(struct dsa_switch *ds, int port,
struct switchdev_obj_port_mdb *mdb,
int (*cb)(struct switchdev_obj *obj));
+
+ /*
+ * TC integration
+ */
+ int (*port_mirror_add)(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress);
+ void (*port_mirror_del)(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
};
struct dsa_switch_driver {
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 16194a4bb2fe..b10b03028b24 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -46,6 +46,9 @@ struct dsa_slave_priv {
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *netpoll;
#endif
+
+ /* TC context */
+ struct list_head mall_tc_list;
};
/* dsa.c */
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 9750dd6f8c17..02863334f06b 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -16,12 +16,17 @@
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <linux/mdio.h>
+#include <linux/list.h>
#include <net/rtnetlink.h>
#include <net/switchdev.h>
+#include <net/pkt_cls.h>
+#include <net/tc_act/tc_mirred.h>
#include <linux/if_bridge.h>
#include <linux/netpoll.h>
#include "dsa_priv.h"
+static bool dsa_slave_dev_check(struct net_device *dev);
+
/* slave mii_bus handling ***************************************************/
static int dsa_slave_phy_read(struct mii_bus *bus, int addr, int reg)
{
@@ -994,6 +999,131 @@ static int dsa_slave_get_phys_port_name(struct net_device *dev,
return 0;
}
+static struct dsa_mall_tc_entry *
+dsa_slave_mall_tc_entry_find(struct dsa_slave_priv *p,
+ unsigned long cookie)
+{
+ struct dsa_mall_tc_entry *mall_tc_entry;
+
+ list_for_each_entry(mall_tc_entry, &p->mall_tc_list, list)
+ if (mall_tc_entry->cookie == cookie)
+ return mall_tc_entry;
+
+ return NULL;
+}
+
+static int dsa_slave_add_cls_matchall(struct net_device *dev,
+ __be16 protocol,
+ struct tc_cls_matchall_offload *cls,
+ bool ingress)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_mall_tc_entry *mall_tc_entry;
+ struct dsa_switch *ds = p->parent;
+ struct net *net = dev_net(dev);
+ struct dsa_slave_priv *to_p;
+ struct net_device *to_dev;
+ const struct tc_action *a;
+ int err = -EOPNOTSUPP;
+ LIST_HEAD(actions);
+ int ifindex;
+
+ if (!ds->ops->port_mirror_add)
+ return err;
+
+ if (!tc_single_action(cls->exts))
+ return err;
+
+ tcf_exts_to_list(cls->exts, &actions);
+ a = list_first_entry(&actions, struct tc_action, list);
+
+ if (is_tcf_mirred_egress_mirror(a) && protocol == htons(ETH_P_ALL)) {
+ struct dsa_mall_mirror_tc_entry *mirror;
+
+ ifindex = tcf_mirred_ifindex(a);
+ to_dev = __dev_get_by_index(net, ifindex);
+ if (!to_dev)
+ return -EINVAL;
+
+ if (!dsa_slave_dev_check(to_dev))
+ return -EOPNOTSUPP;
+
+ mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
+ if (!mall_tc_entry)
+ return -ENOMEM;
+
+ mall_tc_entry->cookie = cls->cookie;
+ mall_tc_entry->type = DSA_PORT_MALL_MIRROR;
+ mirror = &mall_tc_entry->mirror;
+
+ to_p = netdev_priv(to_dev);
+
+ mirror->to_local_port = to_p->port;
+ mirror->ingress = ingress;
+
+ err = ds->ops->port_mirror_add(ds, p->port, mirror, ingress);
+ if (err) {
+ kfree(mall_tc_entry);
+ return err;
+ }
+
+ list_add_tail(&mall_tc_entry->list, &p->mall_tc_list);
+ }
+
+ return 0;
+}
+
+static void dsa_slave_del_cls_matchall(struct net_device *dev,
+ struct tc_cls_matchall_offload *cls)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_mall_tc_entry *mall_tc_entry;
+ struct dsa_switch *ds = p->parent;
+
+ if (!ds->ops->port_mirror_del)
+ return;
+
+ mall_tc_entry = dsa_slave_mall_tc_entry_find(p, cls->cookie);
+ if (!mall_tc_entry)
+ return;
+
+ list_del(&mall_tc_entry->list);
+
+ switch (mall_tc_entry->type) {
+ case DSA_PORT_MALL_MIRROR:
+ ds->ops->port_mirror_del(ds, p->port, &mall_tc_entry->mirror);
+ break;
+ default:
+ WARN_ON(1);
+ }
+
+ kfree(mall_tc_entry);
+}
+
+static int dsa_slave_setup_tc(struct net_device *dev, u32 handle,
+ __be16 protocol, struct tc_to_netdev *tc)
+{
+ bool ingress = TC_H_MAJ(handle) == TC_H_MAJ(TC_H_INGRESS);
+ int ret = -EOPNOTSUPP;
+
+ switch (tc->type) {
+ case TC_SETUP_MATCHALL:
+ switch (tc->cls_mall->command) {
+ case TC_CLSMATCHALL_REPLACE:
+ return dsa_slave_add_cls_matchall(dev, protocol,
+ tc->cls_mall,
+ ingress);
+ case TC_CLSMATCHALL_DESTROY:
+ dsa_slave_del_cls_matchall(dev, tc->cls_mall);
+ return 0;
+ }
+ default:
+ break;
+ }
+
+ return ret;
+}
+
void dsa_cpu_port_ethtool_init(struct ethtool_ops *ops)
{
ops->get_sset_count = dsa_cpu_port_get_sset_count;
@@ -1042,6 +1172,7 @@ static const struct net_device_ops dsa_slave_netdev_ops = {
.ndo_bridge_setlink = switchdev_port_bridge_setlink,
.ndo_bridge_dellink = switchdev_port_bridge_dellink,
.ndo_get_phys_port_name = dsa_slave_get_phys_port_name,
+ .ndo_setup_tc = dsa_slave_setup_tc,
};
static const struct switchdev_ops dsa_slave_switchdev_ops = {
@@ -1257,7 +1388,8 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
if (slave_dev == NULL)
return -ENOMEM;
- slave_dev->features = master->vlan_features;
+ slave_dev->features = master->vlan_features | NETIF_F_HW_TC;
+ slave_dev->hw_features |= NETIF_F_HW_TC;
slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
eth_hw_addr_inherit(slave_dev, master);
slave_dev->priv_flags |= IFF_NO_QUEUE;
@@ -1275,6 +1407,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
slave_dev->vlan_features = master->vlan_features;
p = netdev_priv(slave_dev);
+ INIT_LIST_HEAD(&p->mall_tc_list);
p->parent = ds;
p->port = port;
p->xmit = dst->tag_ops->xmit;
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 1/4] net: dsa: Add plumbing for port mirroring
From: Florian Fainelli @ 2017-01-29 19:29 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, cphealy, jiri, Florian Fainelli
In-Reply-To: <20170129192910.6069-1-f.fainelli@gmail.com>
Add necessary plumbing at the slave network device level to have switch
drivers implement ndo_setup_tc() and most particularly the cls_matchall
classifier. We add support for two switch operations:
port_add_mirror and port_del_mirror() which configure, on a per-port
basis the mirror parameters requested from the cls_matchall classifier.
Code is largely borrowed from the Mellanox Spectrum switch driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/net/dsa.h | 33 +++++++++++++
net/dsa/dsa_priv.h | 3 ++
net/dsa/slave.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 170 insertions(+), 1 deletion(-)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 92fd795e9573..9835bd9054f3 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -20,6 +20,8 @@
#include <linux/phy_fixed.h>
#include <linux/ethtool.h>
+struct tc_action;
+
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = 0,
DSA_TAG_PROTO_DSA,
@@ -139,6 +141,28 @@ struct dsa_switch_tree {
const struct dsa_device_ops *tag_ops;
};
+/* TC matchall action types, only mirroring for now */
+enum dsa_port_mall_action_type {
+ DSA_PORT_MALL_MIRROR,
+};
+
+/* TC mirroring entry */
+struct dsa_mall_mirror_tc_entry {
+ u8 to_local_port;
+ bool ingress;
+};
+
+/* TC matchall entry */
+struct dsa_mall_tc_entry {
+ struct list_head list;
+ unsigned long cookie;
+ enum dsa_port_mall_action_type type;
+ union {
+ struct dsa_mall_mirror_tc_entry mirror;
+ };
+};
+
+
struct dsa_port {
struct net_device *netdev;
struct device_node *dn;
@@ -370,6 +394,15 @@ struct dsa_switch_ops {
int (*port_mdb_dump)(struct dsa_switch *ds, int port,
struct switchdev_obj_port_mdb *mdb,
int (*cb)(struct switchdev_obj *obj));
+
+ /*
+ * TC integration
+ */
+ int (*port_mirror_add)(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress);
+ void (*port_mirror_del)(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
};
struct dsa_switch_driver {
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 16194a4bb2fe..b10b03028b24 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -46,6 +46,9 @@ struct dsa_slave_priv {
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *netpoll;
#endif
+
+ /* TC context */
+ struct list_head mall_tc_list;
};
/* dsa.c */
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 9750dd6f8c17..02863334f06b 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -16,12 +16,17 @@
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <linux/mdio.h>
+#include <linux/list.h>
#include <net/rtnetlink.h>
#include <net/switchdev.h>
+#include <net/pkt_cls.h>
+#include <net/tc_act/tc_mirred.h>
#include <linux/if_bridge.h>
#include <linux/netpoll.h>
#include "dsa_priv.h"
+static bool dsa_slave_dev_check(struct net_device *dev);
+
/* slave mii_bus handling ***************************************************/
static int dsa_slave_phy_read(struct mii_bus *bus, int addr, int reg)
{
@@ -994,6 +999,131 @@ static int dsa_slave_get_phys_port_name(struct net_device *dev,
return 0;
}
+static struct dsa_mall_tc_entry *
+dsa_slave_mall_tc_entry_find(struct dsa_slave_priv *p,
+ unsigned long cookie)
+{
+ struct dsa_mall_tc_entry *mall_tc_entry;
+
+ list_for_each_entry(mall_tc_entry, &p->mall_tc_list, list)
+ if (mall_tc_entry->cookie == cookie)
+ return mall_tc_entry;
+
+ return NULL;
+}
+
+static int dsa_slave_add_cls_matchall(struct net_device *dev,
+ __be16 protocol,
+ struct tc_cls_matchall_offload *cls,
+ bool ingress)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_mall_tc_entry *mall_tc_entry;
+ struct dsa_switch *ds = p->parent;
+ struct net *net = dev_net(dev);
+ struct dsa_slave_priv *to_p;
+ struct net_device *to_dev;
+ const struct tc_action *a;
+ int err = -EOPNOTSUPP;
+ LIST_HEAD(actions);
+ int ifindex;
+
+ if (!ds->ops->port_mirror_add)
+ return err;
+
+ if (!tc_single_action(cls->exts))
+ return err;
+
+ tcf_exts_to_list(cls->exts, &actions);
+ a = list_first_entry(&actions, struct tc_action, list);
+
+ if (is_tcf_mirred_egress_mirror(a) && protocol == htons(ETH_P_ALL)) {
+ struct dsa_mall_mirror_tc_entry *mirror;
+
+ ifindex = tcf_mirred_ifindex(a);
+ to_dev = __dev_get_by_index(net, ifindex);
+ if (!to_dev)
+ return -EINVAL;
+
+ if (!dsa_slave_dev_check(to_dev))
+ return -EOPNOTSUPP;
+
+ mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
+ if (!mall_tc_entry)
+ return -ENOMEM;
+
+ mall_tc_entry->cookie = cls->cookie;
+ mall_tc_entry->type = DSA_PORT_MALL_MIRROR;
+ mirror = &mall_tc_entry->mirror;
+
+ to_p = netdev_priv(to_dev);
+
+ mirror->to_local_port = to_p->port;
+ mirror->ingress = ingress;
+
+ err = ds->ops->port_mirror_add(ds, p->port, mirror, ingress);
+ if (err) {
+ kfree(mall_tc_entry);
+ return err;
+ }
+
+ list_add_tail(&mall_tc_entry->list, &p->mall_tc_list);
+ }
+
+ return 0;
+}
+
+static void dsa_slave_del_cls_matchall(struct net_device *dev,
+ struct tc_cls_matchall_offload *cls)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_mall_tc_entry *mall_tc_entry;
+ struct dsa_switch *ds = p->parent;
+
+ if (!ds->ops->port_mirror_del)
+ return;
+
+ mall_tc_entry = dsa_slave_mall_tc_entry_find(p, cls->cookie);
+ if (!mall_tc_entry)
+ return;
+
+ list_del(&mall_tc_entry->list);
+
+ switch (mall_tc_entry->type) {
+ case DSA_PORT_MALL_MIRROR:
+ ds->ops->port_mirror_del(ds, p->port, &mall_tc_entry->mirror);
+ break;
+ default:
+ WARN_ON(1);
+ }
+
+ kfree(mall_tc_entry);
+}
+
+static int dsa_slave_setup_tc(struct net_device *dev, u32 handle,
+ __be16 protocol, struct tc_to_netdev *tc)
+{
+ bool ingress = TC_H_MAJ(handle) == TC_H_MAJ(TC_H_INGRESS);
+ int ret = -EOPNOTSUPP;
+
+ switch (tc->type) {
+ case TC_SETUP_MATCHALL:
+ switch (tc->cls_mall->command) {
+ case TC_CLSMATCHALL_REPLACE:
+ return dsa_slave_add_cls_matchall(dev, protocol,
+ tc->cls_mall,
+ ingress);
+ case TC_CLSMATCHALL_DESTROY:
+ dsa_slave_del_cls_matchall(dev, tc->cls_mall);
+ return 0;
+ }
+ default:
+ break;
+ }
+
+ return ret;
+}
+
void dsa_cpu_port_ethtool_init(struct ethtool_ops *ops)
{
ops->get_sset_count = dsa_cpu_port_get_sset_count;
@@ -1042,6 +1172,7 @@ static const struct net_device_ops dsa_slave_netdev_ops = {
.ndo_bridge_setlink = switchdev_port_bridge_setlink,
.ndo_bridge_dellink = switchdev_port_bridge_dellink,
.ndo_get_phys_port_name = dsa_slave_get_phys_port_name,
+ .ndo_setup_tc = dsa_slave_setup_tc,
};
static const struct switchdev_ops dsa_slave_switchdev_ops = {
@@ -1257,7 +1388,8 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
if (slave_dev == NULL)
return -ENOMEM;
- slave_dev->features = master->vlan_features;
+ slave_dev->features = master->vlan_features | NETIF_F_HW_TC;
+ slave_dev->hw_features |= NETIF_F_HW_TC;
slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
eth_hw_addr_inherit(slave_dev, master);
slave_dev->priv_flags |= IFF_NO_QUEUE;
@@ -1275,6 +1407,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
slave_dev->vlan_features = master->vlan_features;
p = netdev_priv(slave_dev);
+ INIT_LIST_HEAD(&p->mall_tc_list);
p->parent = ds;
p->port = port;
p->xmit = dst->tag_ops->xmit;
--
2.9.3
^ permalink raw reply related
* Re: [PATCH V2 1/3] net: bgmac: allocate struct bgmac just once & don't copy it
From: Rafał Miłecki @ 2017-01-29 20:03 UTC (permalink / raw)
To: kbuild test robot
Cc: kbuild-all, David S . Miller, Jon Mason, Florian Fainelli,
Felix Fietkau, netdev, Rafał Miłecki
In-Reply-To: <201701290751.2sF8nmut%fengguang.wu@intel.com>
On 01/29/2017 12:40 AM, kbuild test robot wrote:
> [auto build test ERROR on net-next/master]
> [also build test ERROR on v4.10-rc5 next-20170125]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url: https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/net-next-use-one-struct-bgmac-add-PHY-support/20170129-062241
> config: i386-allmodconfig (attached as .config)
> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
> reproduce:
> # save the attached .config to linux build tree
> make ARCH=i386
>
> All error/warnings (new ones prefixed by >>):
>
> drivers/net/ethernet/broadcom/bgmac.c: In function 'bgmac_alloc':
>>> drivers/net/ethernet/broadcom/bgmac.c:1455:12: error: implicit declaration of function 'devm_alloc_etherdev' [-Werror=implicit-function-declaration]
> net_dev = devm_alloc_etherdev(dev, sizeof(*bgmac));
> ^~~~~~~~~~~~~~~~~~~
Thanks, this is expected as this patch depends on
[PATCH net-next] net: add devm version of alloc_etherdev_mqs function
Let's see if net guys will find my devm_alloc_etherdev implementation
acceptable.
^ permalink raw reply
* Re: [PATCH V2 3/3] net: bgmac: use PHY subsystem for initializing PHY
From: Rafał Miłecki @ 2017-01-29 20:14 UTC (permalink / raw)
To: Florian Fainelli, David S . Miller
Cc: Jon Mason, Felix Fietkau, netdev, Rafał Miłecki
In-Reply-To: <08f74e19-f9b2-a0ea-ee21-d35cbdf6ee76@gmail.com>
On 01/29/2017 04:08 AM, Florian Fainelli wrote:
> On 01/28/2017 01:08 PM, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> This adds support for using bgmac with PHYs supported by standalone PHY
>> drivers. Having any PHY initialization in bgmac is hacky and shouldn't
>> be extended but rather removed if anyone has hardware to test it.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>> index 9d9984999dce..6ce80cbcb48e 100644
>> --- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>> +++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>> @@ -132,6 +132,10 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
>> struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo;
>> u8 i;
>>
>> + /* For some legacy hardware we do chipset-based PHY initialization here
>> + * without even detecting PHY ID. It's hacky and should be cleaned as
>> + * soon as someone can test it.
>> + */
>> if (ci->id == BCMA_CHIP_ID_BCM5356) {
>> for (i = 0; i < 5; i++) {
>> bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b);
>> @@ -140,6 +144,7 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
>> bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa);
>> bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
>> }
>> + return;
>
> That part is clearly initializing the built-in Ethernet switch's PHYs,
> and so the natural place for that would be to stick these init values
> into the Broadcom PHY driver. When b53-srab/b53_common attaches the
> switch, it will scan all of these port's builtin PHYs and bind to an
> appropriate PHY driver which could have this initialization as part of
> the config_init routine for instance. Right now, we are most likely
> using the Generic PHY.
I don't think this code is for switch's PHYs. I believe this code is for
wireless access points that have no switch and have Ethernet interface connected
directly to some single-port PHY. I saw 2 or 3 devices like this. They often
also use PoE.
> Here are the different PHY IDs you should read from these models if you
> want to make a subsequent patch that moves this initialization down to
> the Broadcom PHY driver:
>
> 5356: 0x03625DA0
> 5357/53572: 0x03625F00
> 4749: could either be 0x600D85F0 or the same as 53010 (0x600D8760),
> unclear where that product came from... Jon, would you know by chance?
This is very valuable info, thank you! I'll definitely work on this. So far I
tried using bgmac.ko + broadcom.ko on AP device with BCM47186B0 but it doesn't
work for some reason, I'll work on this & keep moving PHY code out of bgmac.
^ permalink raw reply
* Re: [PATCH net-next v3 0/4] net: dsa: Port mirroring support
From: Florian Fainelli @ 2017-01-29 20:33 UTC (permalink / raw)
To: netdev, davem; +Cc: andrew, vivien.didelot, cphealy, jiri
In-Reply-To: <c6533daa-c036-6aef-1850-773996533ccc@gmail.com>
On 01/29/2017 11:46 AM, Florian Fainelli wrote:
> On 01/29/2017 11:29 AM, Florian Fainelli wrote:
>> Hi all,
>>
>> This patch series adds support for port mirroring in the two
>> Broadcom switch drivers. The major part of the functional are actually with
>> the plumbing between tc and the drivers.
>>
>> David, this will most likely conflict a little bit with my other series:
>> net: dsa: bcm_sf2: CFP support, so just let me know if that happens, and
>> I will provide a rebased version. Thanks!
>
> David, not sure why but patch 1 does not want to show up on patchwork,
> and cross checking with spinics.net it's not on netdev@vger.kernel.org
> either... you should have it in your inbox hopefully. git send-email did
> return it was sent correctly. Let me know if you need me to resend the
> whole series. Thanks!
Seems to have appeared on patchwork now, mark the duplicate as
superseded. Thanks
--
Florian
^ permalink raw reply
* Re: [PATCH net-next v2 1/2] qed: Add infrastructure for PTP support.
From: Richard Cochran @ 2017-01-29 20:51 UTC (permalink / raw)
To: Mintz, Yuval
Cc: davem@davemloft.net, netdev@vger.kernel.org, Kalluru, Sudarsana
In-Reply-To: <BL2PR07MB23065AC5421859AAC6D334348D480@BL2PR07MB2306.namprd07.prod.outlook.com>
On Sun, Jan 29, 2017 at 05:26:13PM +0000, Mintz, Yuval wrote:
> We could - but what difference would it make?
It would reduce the chance of missing the next time stamp.
Thanks,
Richard
^ permalink raw reply
* Re: [pull request][net 0/8] Mellanox mlx5 fixes 2017-01-27
From: Saeed Mahameed @ 2017-01-29 20:57 UTC (permalink / raw)
To: Saeed Mahameed; +Cc: David S. Miller, Linux Netdev List
In-Reply-To: <20170127203843.3206-1-saeedm@mellanox.com>
On Fri, Jan 27, 2017 at 10:38 PM, Saeed Mahameed <saeedm@mellanox.com> wrote:
> Hi Dave,
>
> This pull request includes some mlx5 fixes for net, please see details
> below.
>
> Please pull and let me know if there's any problem.
>
> For -stable:
> net/mlx5e: Modify TIRs hash only when it's needed
Hi Dave,
I am going to re-spin and post V2 to address Tom's comments on the
above patch commit message
Thanks,
Saeed.
^ permalink raw reply
* Re: [PATCH net-next v2 2/2] qede: Add driver support for PTP.
From: Richard Cochran @ 2017-01-29 21:02 UTC (permalink / raw)
To: Mintz, Yuval
Cc: davem@davemloft.net, netdev@vger.kernel.org, Kalluru, Sudarsana
In-Reply-To: <BL2PR07MB2306088B2179138BB4557FE58D480@BL2PR07MB2306.namprd07.prod.outlook.com>
On Sun, Jan 29, 2017 at 05:30:51PM +0000, Mintz, Yuval wrote:
> That's part of the driver structuring - qed is responsible for accessing HW
> so it implements api functions for accessing PTP-related configuration,
> while qede is responsible for the network interface and thus is the one to
> register the clock and implements its API.
But there is only one 'qed', and so the separation is just busy work.
Or is there another kind of qed that I missed?
BTW, gotta love the help in your kconfig:
config QED
tristate "QLogic QED 25/40/100Gb core driver"
depends on PCI
select ZLIB_INFLATE
---help---
This enables the support for ...
config QEDE
tristate "QLogic QED 25/40/100Gb Ethernet NIC"
depends on QED
---help---
This enables the support for ...
Thanks,
Richard
^ permalink raw reply
* Re: [PATCH V2 3/3] net: bgmac: use PHY subsystem for initializing PHY
From: Rafał Miłecki @ 2017-01-29 21:31 UTC (permalink / raw)
To: Florian Fainelli
Cc: David S . Miller, Jon Mason, Felix Fietkau, Network Development,
Rafał Miłecki
In-Reply-To: <03584f21-6ea2-a6ea-3100-cf5b1ead4f0f@gmail.com>
On 29 January 2017 at 21:22, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 01/29/2017 12:14 PM, Rafał Miłecki wrote:
>> On 01/29/2017 04:08 AM, Florian Fainelli wrote:
>>> On 01/28/2017 01:08 PM, Rafał Miłecki wrote:
>>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>>
>>>> This adds support for using bgmac with PHYs supported by standalone PHY
>>>> drivers. Having any PHY initialization in bgmac is hacky and shouldn't
>>>> be extended but rather removed if anyone has hardware to test it.
>>>>
>>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>>> ---
>>>> drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 10 ++++++++++
>>>> 1 file changed, 10 insertions(+)
>>>>
>>>> diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>>>> b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>>>> index 9d9984999dce..6ce80cbcb48e 100644
>>>> --- a/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>>>> +++ b/drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
>>>> @@ -132,6 +132,10 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
>>>> struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo;
>>>> u8 i;
>>>>
>>>> + /* For some legacy hardware we do chipset-based PHY
>>>> initialization here
>>>> + * without even detecting PHY ID. It's hacky and should be
>>>> cleaned as
>>>> + * soon as someone can test it.
>>>> + */
>>>> if (ci->id == BCMA_CHIP_ID_BCM5356) {
>>>> for (i = 0; i < 5; i++) {
>>>> bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b);
>>>> @@ -140,6 +144,7 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
>>>> bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa);
>>>> bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
>>>> }
>>>> + return;
>>>
>>> That part is clearly initializing the built-in Ethernet switch's PHYs,
>>> and so the natural place for that would be to stick these init values
>>> into the Broadcom PHY driver. When b53-srab/b53_common attaches the
>>> switch, it will scan all of these port's builtin PHYs and bind to an
>>> appropriate PHY driver which could have this initialization as part of
>>> the config_init routine for instance. Right now, we are most likely
>>> using the Generic PHY.
>>
>> I don't think this code is for switch's PHYs. I believe this code is for
>> wireless access points that have no switch and have Ethernet interface
>> connected
>> directly to some single-port PHY. I saw 2 or 3 devices like this. They
>> often
>> also use PoE.
>
> Humm, built-in PHYs would typically appear as 0-5 on the MDIO bus,
> whereas external PHYs would have a different (and non conflicting)
> address, also, there are restrictions on the Roboswitch devices as to
> where you could wire these external PHYs (to port 5, or 7, 8).
>From BCM47186B0:
[ 0.942419] bgmac_bcma bcma0:2: Found PHY addr: 25
>From BCM47189:
[ 1.758079] bgmac_bcma bcma0:5: Found PHY addr: 0
I got one more AP device but I bricked it by corrupting NVRAM
(bootloader doesn't start due to that).
My BCM47186B0 seems to not have any switch. It isn't that clear in
BCM47189 case. You may be right, some sources say BCM47189 has
built-in switch so maybe it's indeed BCM54210E connected to switch's
port. On the other hand I'm not using any switch driver on my BCM47189
AP board, so how does it work? Just an accidentally working setup left
by the bootloader?
--
Rafał
^ permalink raw reply
* RE: [PATCH net-next v2 1/2] qed: Add infrastructure for PTP support.
From: Mintz, Yuval @ 2017-01-29 21:36 UTC (permalink / raw)
To: Richard Cochran
Cc: davem@davemloft.net, netdev@vger.kernel.org, Kalluru, Sudarsana
In-Reply-To: <20170129205156.GA30336@localhost.localdomain>
> > We could - but what difference would it make?
>
> It would reduce the chance of missing the next time stamp.
I might have gotten it all wrong, but I was under the assumption that time-
stamped packets are periodic, and that the interval between two isn't
going to be so small.
Is so, how does having a couple of additional instructions in between
jeopardizes the next time stamp?
[Don't take it as an objection - given that we'll send a v3 for this one
we'd make the adjustment here; It's just that I feel like I'm missing
something]
^ permalink raw reply
* [net V2 2/8] net/mlx5: Return EOPNOTSUPP when failing to get steering name-space
From: Saeed Mahameed @ 2017-01-29 21:46 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Or Gerlitz, Saeed Mahameed
In-Reply-To: <20170129214626.21977-1-saeedm@mellanox.com>
From: Or Gerlitz <ogerlitz@mellanox.com>
When we fail to retrieve a hardware steering name-space, the returned error
code should say that this operation is not supported. Align the various
places in the driver where this call is made to this convention.
Also, make sure to warn when we fail to retrieve a SW (ANCHOR) name-space.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 +++---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +-
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
index 1fe80de5d68f..a0e5a69402b3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
@@ -1089,7 +1089,7 @@ int mlx5e_create_flow_steering(struct mlx5e_priv *priv)
MLX5_FLOW_NAMESPACE_KERNEL);
if (!priv->fs.ns)
- return -EINVAL;
+ return -EOPNOTSUPP;
err = mlx5e_arfs_create_tables(priv);
if (err) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index bb712139b36e..d0c8bf014453 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -353,7 +353,7 @@ static int esw_create_legacy_fdb_table(struct mlx5_eswitch *esw, int nvports)
root_ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_FDB);
if (!root_ns) {
esw_warn(dev, "Failed to get FDB flow namespace\n");
- return -ENOMEM;
+ return -EOPNOTSUPP;
}
flow_group_in = mlx5_vzalloc(inlen);
@@ -962,7 +962,7 @@ static int esw_vport_enable_egress_acl(struct mlx5_eswitch *esw,
root_ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_EGRESS);
if (!root_ns) {
esw_warn(dev, "Failed to get E-Switch egress flow namespace\n");
- return -EIO;
+ return -EOPNOTSUPP;
}
flow_group_in = mlx5_vzalloc(inlen);
@@ -1079,7 +1079,7 @@ static int esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw,
root_ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_INGRESS);
if (!root_ns) {
esw_warn(dev, "Failed to get E-Switch ingress flow namespace\n");
- return -EIO;
+ return -EOPNOTSUPP;
}
flow_group_in = mlx5_vzalloc(inlen);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 657d319fc4c6..5803216157cf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -535,7 +535,7 @@ static int esw_create_offloads_table(struct mlx5_eswitch *esw)
ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_OFFLOADS);
if (!ns) {
esw_warn(esw->dev, "Failed to get offloads flow namespace\n");
- return -ENOMEM;
+ return -EOPNOTSUPP;
}
ft_offloads = mlx5_create_flow_table(ns, 0, dev->priv.sriov.num_vfs + 2, 0, 0);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index 0ac7a2fc916c..6346a8f5883b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1822,7 +1822,7 @@ static int create_anchor_flow_table(struct mlx5_flow_steering *steering)
struct mlx5_flow_table *ft;
ns = mlx5_get_flow_namespace(steering->dev, MLX5_FLOW_NAMESPACE_ANCHOR);
- if (!ns)
+ if (WARN_ON(!ns))
return -EINVAL;
ft = mlx5_create_flow_table(ns, ANCHOR_PRIO, ANCHOR_SIZE, ANCHOR_LEVEL, 0);
if (IS_ERR(ft)) {
--
2.11.0
^ permalink raw reply related
* [net V2 1/8] net/mlx5: Change ENOTSUPP to EOPNOTSUPP
From: Saeed Mahameed @ 2017-01-29 21:46 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Or Gerlitz, Saeed Mahameed
In-Reply-To: <20170129214626.21977-1-saeedm@mellanox.com>
From: Or Gerlitz <ogerlitz@mellanox.com>
As ENOTSUPP is specific to NFS, change the return error value to
EOPNOTSUPP in various places in the mlx5 driver.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Suggested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 6 +++---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 10 +++++-----
drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/port.c | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/vport.c | 2 +-
12 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 3797cc7c1288..caa837e5e2b9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1728,7 +1728,7 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev)
if (cmd->cmdif_rev > CMD_IF_REV) {
dev_err(&dev->pdev->dev, "driver does not support command interface version. driver %d, firmware %d\n",
CMD_IF_REV, cmd->cmdif_rev);
- err = -ENOTSUPP;
+ err = -EOPNOTSUPP;
goto err_free_page;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 951dbd58594d..1619147a63e8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -863,12 +863,12 @@ static inline void mlx5e_arfs_destroy_tables(struct mlx5e_priv *priv) {}
static inline int mlx5e_arfs_enable(struct mlx5e_priv *priv)
{
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
static inline int mlx5e_arfs_disable(struct mlx5e_priv *priv)
{
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
#else
int mlx5e_arfs_create_tables(struct mlx5e_priv *priv);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index f0b460f47f29..35f9ae037ba0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -89,7 +89,7 @@ static int mlx5e_dcbnl_ieee_getets(struct net_device *netdev,
int i;
if (!MLX5_CAP_GEN(priv->mdev, ets))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
ets->ets_cap = mlx5_max_tc(priv->mdev) + 1;
for (i = 0; i < ets->ets_cap; i++) {
@@ -236,7 +236,7 @@ static int mlx5e_dcbnl_ieee_setets(struct net_device *netdev,
int err;
if (!MLX5_CAP_GEN(priv->mdev, ets))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
err = mlx5e_dbcnl_validate_ets(netdev, ets);
if (err)
@@ -402,7 +402,7 @@ static u8 mlx5e_dcbnl_setall(struct net_device *netdev)
struct mlx5_core_dev *mdev = priv->mdev;
struct ieee_ets ets;
struct ieee_pfc pfc;
- int err = -ENOTSUPP;
+ int err = -EOPNOTSUPP;
int i;
if (!MLX5_CAP_GEN(mdev, ets))
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 5197817e4b2f..ffbdf9ee5a9b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -595,7 +595,7 @@ static int mlx5e_get_coalesce(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
if (!MLX5_CAP_GEN(priv->mdev, cq_moderation))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
coal->rx_coalesce_usecs = priv->params.rx_cq_moderation.usec;
coal->rx_max_coalesced_frames = priv->params.rx_cq_moderation.pkts;
@@ -620,7 +620,7 @@ static int mlx5e_set_coalesce(struct net_device *netdev,
int i;
if (!MLX5_CAP_GEN(mdev, cq_moderation))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
mutex_lock(&priv->state_lock);
@@ -1296,7 +1296,7 @@ static int mlx5e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
u32 mlx5_wol_mode;
if (!wol_supported)
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
if (wol->wolopts & ~wol_supported)
return -EINVAL;
@@ -1426,7 +1426,7 @@ static int set_pflag_rx_cqe_based_moder(struct net_device *netdev, bool enable)
if (rx_cq_period_mode == MLX5_CQ_PERIOD_MODE_START_FROM_CQE &&
!MLX5_CAP_GEN(mdev, cq_period_start_from_cqe))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
if (!rx_mode_changed)
return 0;
@@ -1452,7 +1452,7 @@ static int set_pflag_rx_cqe_compress(struct net_device *netdev,
bool reset;
if (!MLX5_CAP_GEN(mdev, cqe_compression))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
if (enable && priv->tstamp.hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
netdev_err(netdev, "Can't enable cqe compression while timestamping is enabled.\n");
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
index d088effd7160..f33f72d0237c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
@@ -92,7 +92,7 @@ static struct mlx5e_ethtool_table *get_flow_table(struct mlx5e_priv *priv,
ns = mlx5_get_flow_namespace(priv->mdev,
MLX5_FLOW_NAMESPACE_ETHTOOL);
if (!ns)
- return ERR_PTR(-ENOTSUPP);
+ return ERR_PTR(-EOPNOTSUPP);
table_size = min_t(u32, BIT(MLX5_CAP_FLOWTABLE(priv->mdev,
flow_table_properties_nic_receive.log_max_ft_size)),
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 2b7dd315020c..948351ae5bd2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3331,7 +3331,7 @@ static const struct net_device_ops mlx5e_netdev_ops_sriov = {
static int mlx5e_check_required_hca_cap(struct mlx5_core_dev *mdev)
{
if (MLX5_CAP_GEN(mdev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
if (!MLX5_CAP_GEN(mdev, eth_net_offloads) ||
!MLX5_CAP_GEN(mdev, nic_flow_table) ||
!MLX5_CAP_ETH(mdev, csum_cap) ||
@@ -3343,7 +3343,7 @@ static int mlx5e_check_required_hca_cap(struct mlx5_core_dev *mdev)
< 3) {
mlx5_core_warn(mdev,
"Not creating net device, some required device capabilities are missing\n");
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
if (!MLX5_CAP_ETH(mdev, self_lb_en_modifiable))
mlx5_core_warn(mdev, "Self loop back prevention is not supported\n");
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index f14d9c9ba773..bb712139b36e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -133,7 +133,7 @@ static int modify_esw_vport_cvlan(struct mlx5_core_dev *dev, u32 vport,
if (!MLX5_CAP_ESW(dev, vport_cvlan_strip) ||
!MLX5_CAP_ESW(dev, vport_cvlan_insert_if_not_exist))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
esw_debug(dev, "Set Vport[%d] VLAN %d qos %d set=%x\n",
vport, vlan, qos, set_flags);
@@ -1630,7 +1630,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
if (!MLX5_CAP_GEN(esw->dev, eswitch_flow_table) ||
!MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) {
esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n");
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
if (!MLX5_CAP_ESW_INGRESS_ACL(esw->dev, ft_support))
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 03293ed1cc22..657d319fc4c6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -166,7 +166,7 @@ static int esw_add_vlan_action_check(struct mlx5_esw_flow_attr *attr,
return 0;
out_notsupp:
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
int mlx5_eswitch_add_vlan_action(struct mlx5_eswitch *esw,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
index c4478ecd8056..b53fc85a2375 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
@@ -322,7 +322,7 @@ int mlx5_cmd_update_fte(struct mlx5_core_dev *dev,
flow_table_properties_nic_receive.
flow_modify_en);
if (!atomic_mod_cap)
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
opmod = 1;
return mlx5_cmd_set_fte(dev, opmod, modify_mask, ft, group_id, fte);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index d01e9f21d469..3c315eb8d270 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -807,7 +807,7 @@ static int mlx5_core_set_issi(struct mlx5_core_dev *dev)
return 0;
}
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index d2ec9d232a70..fd12e0a377a5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -620,7 +620,7 @@ static int mlx5_set_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *in,
u32 out[MLX5_ST_SZ_DW(qtct_reg)];
if (!MLX5_CAP_GEN(mdev, ets))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
return mlx5_core_access_reg(mdev, in, inlen, out, sizeof(out),
MLX5_REG_QETCR, 0, 1);
@@ -632,7 +632,7 @@ static int mlx5_query_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *out,
u32 in[MLX5_ST_SZ_DW(qtct_reg)];
if (!MLX5_CAP_GEN(mdev, ets))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
memset(in, 0, sizeof(in));
return mlx5_core_access_reg(mdev, in, sizeof(in), out, outlen,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
index 269e4401c342..7129c30a2ab4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
@@ -532,7 +532,7 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev,
if (!MLX5_CAP_GEN(mdev, vport_group_manager))
return -EACCES;
if (!MLX5_CAP_ESW(mdev, nic_vport_node_guid_modify))
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
in = mlx5_vzalloc(inlen);
if (!in)
--
2.11.0
^ permalink raw reply related
* [net V2 8/8] net/mlx5e: Check ets capability before ets query FW command
From: Saeed Mahameed @ 2017-01-29 21:46 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Moshe Shemesh, Saeed Mahameed
In-Reply-To: <20170129214626.21977-1-saeedm@mellanox.com>
From: Moshe Shemesh <moshe@mellanox.com>
On dcbnl callback getpgtccfgtx, the driver should check the ets
capability before ets query command is sent to firmware.
It is valid to return from this void function without changing in/out
parameters, as these parameters are initialized to
DCB_ATTR_VALUE_UNDEFINED.
Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 35f9ae037ba0..0523ed47f597 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -511,6 +511,11 @@ static void mlx5e_dcbnl_getpgtccfgtx(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
+ if (!MLX5_CAP_GEN(priv->mdev, ets)) {
+ netdev_err(netdev, "%s, ets is not supported\n", __func__);
+ return;
+ }
+
if (priority >= CEE_DCBX_MAX_PRIO) {
netdev_err(netdev,
"%s, priority is out of range\n", __func__);
--
2.11.0
^ permalink raw reply related
* [net V2 4/8] net/mlx5: E-Switch, Re-enable RoCE on mode change only after FDB destroy
From: Saeed Mahameed @ 2017-01-29 21:46 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Or Gerlitz, Saeed Mahameed
In-Reply-To: <20170129214626.21977-1-saeedm@mellanox.com>
From: Or Gerlitz <ogerlitz@mellanox.com>
We must re-enable RoCE on the e-switch management port (PF) only after destroying
the FDB in its switchdev/offloaded mode. Otherwise, when encapsulation is supported,
this re-enablement will fail.
Also, it's more natural and symmetric to disable RoCE on the PF before we create
the FDB under switchdev mode, so do that as well and revert if getting into error
during the mode change later.
Fixes: 9da34cd34e85 ('net/mlx5: Disable RoCE on the e-switch management [..]')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 29 ++++++++++++++--------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index c61bca138e65..595f7c7383b3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -675,9 +675,14 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
int vport;
int err;
+ /* disable PF RoCE so missed packets don't go through RoCE steering */
+ mlx5_dev_list_lock();
+ mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
err = esw_create_offloads_fdb_table(esw, nvports);
if (err)
- return err;
+ goto create_fdb_err;
err = esw_create_offloads_table(esw);
if (err)
@@ -697,11 +702,6 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
goto err_reps;
}
- /* disable PF RoCE so missed packets don't go through RoCE steering */
- mlx5_dev_list_lock();
- mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
- mlx5_dev_list_unlock();
-
return 0;
err_reps:
@@ -718,6 +718,13 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
create_ft_err:
esw_destroy_offloads_fdb_table(esw);
+
+create_fdb_err:
+ /* enable back PF RoCE */
+ mlx5_dev_list_lock();
+ mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
return err;
}
@@ -725,11 +732,6 @@ static int esw_offloads_stop(struct mlx5_eswitch *esw)
{
int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs;
- /* enable back PF RoCE */
- mlx5_dev_list_lock();
- mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
- mlx5_dev_list_unlock();
-
mlx5_eswitch_disable_sriov(esw);
err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY);
if (err) {
@@ -739,6 +741,11 @@ static int esw_offloads_stop(struct mlx5_eswitch *esw)
esw_warn(esw->dev, "Failed setting eswitch back to offloads, err %d\n", err);
}
+ /* enable back PF RoCE */
+ mlx5_dev_list_lock();
+ mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
return err;
}
--
2.11.0
^ permalink raw reply related
* [net V2 3/8] net/mlx5: E-Switch, Err when retrieving steering name-space fails
From: Saeed Mahameed @ 2017-01-29 21:46 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Or Gerlitz, Saeed Mahameed
In-Reply-To: <20170129214626.21977-1-saeedm@mellanox.com>
From: Or Gerlitz <ogerlitz@mellanox.com>
Make sure to return error when we failed retrieving the FDB steering
name space. Also, while around, correctly print the error when mode
change revert fails in the warning message.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 5803216157cf..c61bca138e65 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -424,6 +424,7 @@ static int esw_create_offloads_fdb_table(struct mlx5_eswitch *esw, int nvports)
root_ns = mlx5_get_flow_namespace(dev, MLX5_FLOW_NAMESPACE_FDB);
if (!root_ns) {
esw_warn(dev, "Failed to get FDB flow namespace\n");
+ err = -EOPNOTSUPP;
goto ns_err;
}
@@ -655,7 +656,7 @@ static int esw_offloads_start(struct mlx5_eswitch *esw)
esw_warn(esw->dev, "Failed setting eswitch to offloads, err %d\n", err);
err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY);
if (err1)
- esw_warn(esw->dev, "Failed setting eswitch back to legacy, err %d\n", err);
+ esw_warn(esw->dev, "Failed setting eswitch back to legacy, err %d\n", err1);
}
if (esw->offloads.inline_mode == MLX5_INLINE_MODE_NONE) {
if (mlx5_eswitch_inline_mode_get(esw,
--
2.11.0
^ permalink raw reply related
* [net V2 6/8] net/mlx5e: Modify TIRs hash only when it's needed
From: Saeed Mahameed @ 2017-01-29 21:46 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Gal Pressman, Saeed Mahameed
In-Reply-To: <20170129214626.21977-1-saeedm@mellanox.com>
From: Gal Pressman <galp@mellanox.com>
We don't need to modify our TIRs unless the user requested a change in
the hash function/key, for example when changing indirection only.
Tested:
# Modify TIRs hash is needed
ethtool -X ethX hkey <new key>
ethtool -X ethX hfunc <new func>
# Modify TIRs hash is not needed
ethtool -X ethX equal <new indirection table>
All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6.
Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index ffbdf9ee5a9b..6f4eb34259f0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -996,6 +996,7 @@ static int mlx5e_set_rxfh(struct net_device *dev, const u32 *indir,
{
struct mlx5e_priv *priv = netdev_priv(dev);
int inlen = MLX5_ST_SZ_BYTES(modify_tir_in);
+ bool hash_changed = false;
void *in;
if ((hfunc != ETH_RSS_HASH_NO_CHANGE) &&
@@ -1017,14 +1018,21 @@ static int mlx5e_set_rxfh(struct net_device *dev, const u32 *indir,
mlx5e_redirect_rqt(priv, rqtn, MLX5E_INDIR_RQT_SIZE, 0);
}
- if (key)
+ if (hfunc != ETH_RSS_HASH_NO_CHANGE &&
+ hfunc != priv->params.rss_hfunc) {
+ priv->params.rss_hfunc = hfunc;
+ hash_changed = true;
+ }
+
+ if (key) {
memcpy(priv->params.toeplitz_hash_key, key,
sizeof(priv->params.toeplitz_hash_key));
+ hash_changed = hash_changed ||
+ priv->params.rss_hfunc == ETH_RSS_HASH_TOP;
+ }
- if (hfunc != ETH_RSS_HASH_NO_CHANGE)
- priv->params.rss_hfunc = hfunc;
-
- mlx5e_modify_tirs_hash(priv, in, inlen);
+ if (hash_changed)
+ mlx5e_modify_tirs_hash(priv, in, inlen);
mutex_unlock(&priv->state_lock);
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox