* [PATCH v6 06/21] arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
In-Reply-To: <20170531071852.12422-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch add the dt node for the syscon register present on the
Allwinner H3/H5
Only two register are present in this syscon and the only one useful is
the one dedicated to EMAC clock..
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index d0067fec99de..3a28be5ab641 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -83,6 +83,12 @@
#size-cells = <1>;
ranges;
+ syscon: syscon@1c00000 {
+ compatible = "allwinner,sun8i-h3-system-controller",
+ "syscon";
+ reg = <0x01c00000 0x1000>;
+ };
+
dma: dma-controller@01c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
--
2.13.0
^ permalink raw reply related
* [PATCH v6 05/21] net-next: stmmac: Add dwmac-sun8i
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
In-Reply-To: <20170531071852.12422-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The dwmac-sun8i is a heavy hacked version of stmmac hardware by
allwinner.
In fact the only common part is the descriptor management and the first
register function.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 +
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 990 +++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 +-
include/linux/stmmac.h | 1 +
6 files changed, 1025 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cfbe3634dfa1..85c0e41f8021 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -145,6 +145,17 @@ config DWMAC_SUNXI
This selects Allwinner SoC glue layer support for the
stmmac device driver. This driver is used for A20/A31
GMAC ethernet controller.
+
+config DWMAC_SUN8I
+ tristate "Allwinner sun8i GMAC support"
+ default ARCH_SUNXI
+ depends on OF && (ARCH_SUNXI || COMPILE_TEST)
+ ---help---
+ Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
+
+ This selects Allwinner SoC glue layer support for the
+ stmmac device driver. This driver is used for H3/A83T/A64
+ EMAC ethernet controller.
endif
config STMMAC_PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 700c60336674..fd4937a7fcab 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
+obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o
obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
new file mode 100644
index 000000000000..1a6bfe6c958f
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -0,0 +1,990 @@
+/*
+ * dwmac-sun8i.c - Allwinner sun8i DWMAC specific glue layer
+ *
+ * Copyright (C) 2017 Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+#include "stmmac.h"
+#include "stmmac_platform.h"
+
+/* General notes on dwmac-sun8i:
+ * Locking: no locking is necessary in this file because all necessary locking
+ * is done in the "stmmac files"
+ */
+
+/* struct emac_variant - Descrive dwmac-sun8i hardware variant
+ * @default_syscon_value: The default value of the EMAC register in syscon
+ * This value is used for disabling properly EMAC
+ * and used as a good starting value in case of the
+ * boot process(uboot) leave some stuff.
+ * @internal_phy: Does the MAC embed an internal PHY
+ * @support_mii: Does the MAC handle MII
+ * @support_rmii: Does the MAC handle RMII
+ * @support_rgmii: Does the MAC handle RGMII
+ */
+struct emac_variant {
+ u32 default_syscon_value;
+ int internal_phy;
+ bool support_mii;
+ bool support_rmii;
+ bool support_rgmii;
+};
+
+/* struct sunxi_priv_data - hold all sunxi private data
+ * @tx_clk: reference to MAC TX clock
+ * @ephy_clk: reference to the optional EPHY clock for the internal PHY
+ * @regulator: reference to the optional regulator
+ * @rst_ephy: reference to the optional EPHY reset for the internal PHY
+ * @variant: reference to the current board variant
+ * @regmap: regmap for using the syscon
+ * @use_internal_phy: Does the current PHY choice imply using the internal PHY
+ */
+struct sunxi_priv_data {
+ struct clk *tx_clk;
+ struct clk *ephy_clk;
+ struct regulator *regulator;
+ struct reset_control *rst_ephy;
+ const struct emac_variant *variant;
+ struct regmap *regmap;
+ bool use_internal_phy;
+};
+
+static const struct emac_variant emac_variant_h3 = {
+ .default_syscon_value = 0x58000,
+ .internal_phy = PHY_INTERFACE_MODE_MII,
+ .support_mii = true,
+ .support_rmii = true,
+ .support_rgmii = true
+};
+
+static const struct emac_variant emac_variant_a83t = {
+ .default_syscon_value = 0,
+ .internal_phy = 0,
+ .support_mii = true,
+ .support_rgmii = true
+};
+
+static const struct emac_variant emac_variant_a64 = {
+ .default_syscon_value = 0,
+ .internal_phy = 0,
+ .support_mii = true,
+ .support_rmii = true,
+ .support_rgmii = true
+};
+
+#define EMAC_BASIC_CTL0 0x00
+#define EMAC_BASIC_CTL1 0x04
+#define EMAC_INT_STA 0x08
+#define EMAC_INT_EN 0x0C
+#define EMAC_TX_CTL0 0x10
+#define EMAC_TX_CTL1 0x14
+#define EMAC_TX_FLOW_CTL 0x1C
+#define EMAC_TX_DESC_LIST 0x20
+#define EMAC_RX_CTL0 0x24
+#define EMAC_RX_CTL1 0x28
+#define EMAC_RX_DESC_LIST 0x34
+#define EMAC_RX_FRM_FLT 0x38
+#define EMAC_MDIO_CMD 0x48
+#define EMAC_MDIO_DATA 0x4C
+#define EMAC_MACADDR_HI(reg) (0x50 + (reg) * 8)
+#define EMAC_MACADDR_LO(reg) (0x54 + (reg) * 8)
+#define EMAC_TX_DMA_STA 0xB0
+#define EMAC_TX_CUR_DESC 0xB4
+#define EMAC_TX_CUR_BUF 0xB8
+#define EMAC_RX_DMA_STA 0xC0
+#define EMAC_RX_CUR_DESC 0xC4
+#define EMAC_RX_CUR_BUF 0xC8
+
+/* Use in EMAC_BASIC_CTL0 */
+#define EMAC_DUPLEX_FULL BIT(0)
+#define EMAC_LOOPBACK BIT(1)
+#define EMAC_SPEED_1000 0
+#define EMAC_SPEED_100 (0x03 << 2)
+#define EMAC_SPEED_10 (0x02 << 2)
+
+/* Use in EMAC_BASIC_CTL1 */
+#define EMAC_BURSTLEN_SHIFT 24
+
+/* Used in EMAC_RX_FRM_FLT */
+#define EMAC_FRM_FLT_RXALL BIT(0)
+#define EMAC_FRM_FLT_CTL BIT(13)
+#define EMAC_FRM_FLT_MULTICAST BIT(16)
+
+/* Used in RX_CTL1*/
+#define EMAC_RX_MD BIT(1)
+#define EMAC_RX_TH_MASK GENMASK(4, 5)
+#define EMAC_RX_TH_32 0
+#define EMAC_RX_TH_64 (0x1 << 4)
+#define EMAC_RX_TH_96 (0x2 << 4)
+#define EMAC_RX_TH_128 (0x3 << 4)
+#define EMAC_RX_DMA_EN BIT(30)
+#define EMAC_RX_DMA_START BIT(31)
+
+/* Used in TX_CTL1*/
+#define EMAC_TX_MD BIT(1)
+#define EMAC_TX_NEXT_FRM BIT(2)
+#define EMAC_TX_TH_MASK GENMASK(8, 10)
+#define EMAC_TX_TH_64 0
+#define EMAC_TX_TH_128 (0x1 << 8)
+#define EMAC_TX_TH_192 (0x2 << 8)
+#define EMAC_TX_TH_256 (0x3 << 8)
+#define EMAC_TX_DMA_EN BIT(30)
+#define EMAC_TX_DMA_START BIT(31)
+
+/* Used in RX_CTL0 */
+#define EMAC_RX_RECEIVER_EN BIT(31)
+#define EMAC_RX_DO_CRC BIT(27)
+#define EMAC_RX_FLOW_CTL_EN BIT(16)
+
+/* Used in TX_CTL0 */
+#define EMAC_TX_TRANSMITTER_EN BIT(31)
+
+/* Used in EMAC_TX_FLOW_CTL */
+#define EMAC_TX_FLOW_CTL_EN BIT(0)
+
+/* Used in EMAC_INT_STA */
+#define EMAC_TX_INT BIT(0)
+#define EMAC_TX_DMA_STOP_INT BIT(1)
+#define EMAC_TX_BUF_UA_INT BIT(2)
+#define EMAC_TX_TIMEOUT_INT BIT(3)
+#define EMAC_TX_UNDERFLOW_INT BIT(4)
+#define EMAC_TX_EARLY_INT BIT(5)
+#define EMAC_RX_INT BIT(8)
+#define EMAC_RX_BUF_UA_INT BIT(9)
+#define EMAC_RX_DMA_STOP_INT BIT(10)
+#define EMAC_RX_TIMEOUT_INT BIT(11)
+#define EMAC_RX_OVERFLOW_INT BIT(12)
+#define EMAC_RX_EARLY_INT BIT(13)
+#define EMAC_RGMII_STA_INT BIT(16)
+
+#define MAC_ADDR_TYPE_DST BIT(31)
+
+/* H3 specific bits for EPHY */
+#define H3_EPHY_ADDR_SHIFT 20
+#define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */
+#define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */
+#define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */
+
+/* H3/A64 specific bits */
+#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */
+
+/* Generic system control EMAC_CLK bits */
+#define SYSCON_ETXDC_MASK GENMASK(2, 0)
+#define SYSCON_ETXDC_SHIFT 10
+#define SYSCON_ERXDC_MASK GENMASK(4, 0)
+#define SYSCON_ERXDC_SHIFT 5
+/* EMAC PHY Interface Type */
+#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */
+#define SYSCON_ETCS_MASK GENMASK(1, 0)
+#define SYSCON_ETCS_MII 0x0
+#define SYSCON_ETCS_EXT_GMII 0x1
+#define SYSCON_ETCS_INT_GMII 0x2
+#define SYSCON_EMAC_REG 0x30
+
+/* sun8i_dwmac_dma_reset() - reset the EMAC
+ * Called from stmmac via stmmac_dma_ops->reset
+ */
+static int sun8i_dwmac_dma_reset(void __iomem *ioaddr)
+{
+ writel(0, ioaddr + EMAC_RX_CTL1);
+ writel(0, ioaddr + EMAC_TX_CTL1);
+ writel(0, ioaddr + EMAC_RX_FRM_FLT);
+ writel(0, ioaddr + EMAC_RX_DESC_LIST);
+ writel(0, ioaddr + EMAC_TX_DESC_LIST);
+ writel(0, ioaddr + EMAC_INT_EN);
+ writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
+ return 0;
+}
+
+/* sun8i_dwmac_dma_init() - initialize the EMAC
+ * Called from stmmac via stmmac_dma_ops->init
+ */
+static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx, u32 dma_rx, int atds)
+{
+ /* Write TX and RX descriptors address */
+ writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST);
+ writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST);
+
+ writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
+ writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
+}
+
+/* sun8i_dwmac_dump_regs() - Dump EMAC address space
+ * Called from stmmac_dma_ops->dump_regs
+ * Used for ethtool
+ */
+static void sun8i_dwmac_dump_regs(void __iomem *ioaddr, u32 *reg_space)
+{
+ int i;
+
+ for (i = 0; i < 0xC8; i += 4) {
+ if (i == 0x32 || i == 0x3C)
+ continue;
+ reg_space[i / 4] = readl(ioaddr + i);
+ }
+}
+
+/* sun8i_dwmac_dump_mac_regs() - Dump EMAC address space
+ * Called from stmmac_ops->dump_regs
+ * Used for ethtool
+ */
+static void sun8i_dwmac_dump_mac_regs(struct mac_device_info *hw,
+ u32 *reg_space)
+{
+ int i;
+ void __iomem *ioaddr = hw->pcsr;
+
+ for (i = 0; i < 0xC8; i += 4) {
+ if (i == 0x32 || i == 0x3C)
+ continue;
+ reg_space[i / 4] = readl(ioaddr + i);
+ }
+}
+
+static void sun8i_dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan)
+{
+ writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
+}
+
+static void sun8i_dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan)
+{
+ writel(0, ioaddr + EMAC_INT_EN);
+}
+
+static void sun8i_dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_TX_CTL1);
+ v |= EMAC_TX_DMA_START;
+ v |= EMAC_TX_DMA_EN;
+ writel(v, ioaddr + EMAC_TX_CTL1);
+}
+
+static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_TX_CTL1);
+ v |= EMAC_TX_DMA_START;
+ v |= EMAC_TX_DMA_EN;
+ writel(v, ioaddr + EMAC_TX_CTL1);
+}
+
+static void sun8i_dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_TX_CTL1);
+ v &= ~EMAC_TX_DMA_EN;
+ writel(v, ioaddr + EMAC_TX_CTL1);
+}
+
+static void sun8i_dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_RX_CTL1);
+ v |= EMAC_RX_DMA_START;
+ v |= EMAC_RX_DMA_EN;
+ writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static void sun8i_dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_RX_CTL1);
+ v &= ~EMAC_RX_DMA_EN;
+ writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr,
+ struct stmmac_extra_stats *x, u32 chan)
+{
+ u32 v;
+ int ret = 0;
+
+ v = readl(ioaddr + EMAC_INT_STA);
+
+ if (v & EMAC_TX_INT) {
+ ret |= handle_tx;
+ x->tx_normal_irq_n++;
+ }
+
+ if (v & EMAC_TX_DMA_STOP_INT)
+ x->tx_process_stopped_irq++;
+
+ if (v & EMAC_TX_BUF_UA_INT)
+ x->tx_process_stopped_irq++;
+
+ if (v & EMAC_TX_TIMEOUT_INT)
+ ret |= tx_hard_error;
+
+ if (v & EMAC_TX_UNDERFLOW_INT) {
+ ret |= tx_hard_error;
+ x->tx_undeflow_irq++;
+ }
+
+ if (v & EMAC_TX_EARLY_INT)
+ x->tx_early_irq++;
+
+ if (v & EMAC_RX_INT) {
+ ret |= handle_rx;
+ x->rx_normal_irq_n++;
+ }
+
+ if (v & EMAC_RX_BUF_UA_INT)
+ x->rx_buf_unav_irq++;
+
+ if (v & EMAC_RX_DMA_STOP_INT)
+ x->rx_process_stopped_irq++;
+
+ if (v & EMAC_RX_TIMEOUT_INT)
+ ret |= tx_hard_error;
+
+ if (v & EMAC_RX_OVERFLOW_INT) {
+ ret |= tx_hard_error;
+ x->rx_overflow_irq++;
+ }
+
+ if (v & EMAC_RX_EARLY_INT)
+ x->rx_early_irq++;
+
+ if (v & EMAC_RGMII_STA_INT)
+ x->irq_rgmii_n++;
+
+ writel(v, ioaddr + EMAC_INT_STA);
+
+ return ret;
+}
+
+static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
+ int rxmode, int rxfifosz)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_TX_CTL1);
+ if (txmode == SF_DMA_MODE) {
+ v |= EMAC_TX_MD;
+ /* Undocumented bit (called TX_NEXT_FRM in BSP), the original
+ * comment is
+ * "Operating on second frame increase the performance
+ * especially when transmit store-and-forward is used."
+ */
+ v |= EMAC_TX_NEXT_FRM;
+ } else {
+ v &= ~EMAC_TX_MD;
+ v &= ~EMAC_TX_TH_MASK;
+ if (txmode < 64)
+ v |= EMAC_TX_TH_64;
+ else if (txmode < 128)
+ v |= EMAC_TX_TH_128;
+ else if (txmode < 192)
+ v |= EMAC_TX_TH_192;
+ else if (txmode < 256)
+ v |= EMAC_TX_TH_256;
+ }
+ writel(v, ioaddr + EMAC_TX_CTL1);
+
+ v = readl(ioaddr + EMAC_RX_CTL1);
+ if (rxmode == SF_DMA_MODE) {
+ v |= EMAC_RX_MD;
+ } else {
+ v &= ~EMAC_RX_MD;
+ v &= ~EMAC_RX_TH_MASK;
+ if (rxmode < 32)
+ v |= EMAC_RX_TH_32;
+ else if (rxmode < 64)
+ v |= EMAC_RX_TH_64;
+ else if (rxmode < 96)
+ v |= EMAC_RX_TH_96;
+ else if (rxmode < 128)
+ v |= EMAC_RX_TH_128;
+ }
+ writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
+ .reset = sun8i_dwmac_dma_reset,
+ .init = sun8i_dwmac_dma_init,
+ .dump_regs = sun8i_dwmac_dump_regs,
+ .dma_mode = sun8i_dwmac_dma_operation_mode,
+ .enable_dma_transmission = sun8i_dwmac_enable_dma_transmission,
+ .enable_dma_irq = sun8i_dwmac_enable_dma_irq,
+ .disable_dma_irq = sun8i_dwmac_disable_dma_irq,
+ .start_tx = sun8i_dwmac_dma_start_tx,
+ .stop_tx = sun8i_dwmac_dma_stop_tx,
+ .start_rx = sun8i_dwmac_dma_start_rx,
+ .stop_rx = sun8i_dwmac_dma_stop_rx,
+ .dma_interrupt = sun8i_dwmac_dma_interrupt,
+};
+
+static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
+{
+ struct sunxi_priv_data *gmac = priv;
+ int ret;
+
+ if (gmac->regulator) {
+ ret = regulator_enable(gmac->regulator);
+ if (ret) {
+ dev_err(&pdev->dev, "Fail to enable regulator\n");
+ return ret;
+ }
+ }
+
+ ret = clk_prepare_enable(gmac->tx_clk);
+ if (ret) {
+ if (gmac->regulator)
+ regulator_disable(gmac->regulator);
+ dev_err(&pdev->dev, "Could not enable AHB clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sun8i_dwmac_core_init(struct mac_device_info *hw, int mtu)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 v;
+
+ v = (8 << EMAC_BURSTLEN_SHIFT); /* burst len */
+ writel(v, ioaddr + EMAC_BASIC_CTL1);
+}
+
+static void sun8i_dwmac_set_mac(void __iomem *ioaddr, bool enable)
+{
+ u32 t, r;
+
+ t = readl(ioaddr + EMAC_TX_CTL0);
+ r = readl(ioaddr + EMAC_RX_CTL0);
+ if (enable) {
+ t |= EMAC_TX_TRANSMITTER_EN;
+ r |= EMAC_RX_RECEIVER_EN;
+ } else {
+ t &= ~EMAC_TX_TRANSMITTER_EN;
+ r &= ~EMAC_RX_RECEIVER_EN;
+ }
+ writel(t, ioaddr + EMAC_TX_CTL0);
+ writel(r, ioaddr + EMAC_RX_CTL0);
+}
+
+/* Set MAC address at slot reg_n
+ * All slot > 0 need to be enabled with MAC_ADDR_TYPE_DST
+ * If addr is NULL, clear the slot
+ */
+static void sun8i_dwmac_set_umac_addr(struct mac_device_info *hw,
+ unsigned char *addr,
+ unsigned int reg_n)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 v;
+
+ if (!addr) {
+ writel(0, ioaddr + EMAC_MACADDR_HI(reg_n));
+ return;
+ }
+
+ stmmac_set_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n),
+ EMAC_MACADDR_LO(reg_n));
+ if (reg_n > 0) {
+ v = readl(ioaddr + EMAC_MACADDR_HI(reg_n));
+ v |= MAC_ADDR_TYPE_DST;
+ writel(v, ioaddr + EMAC_MACADDR_HI(reg_n));
+ }
+}
+
+static void sun8i_dwmac_get_umac_addr(struct mac_device_info *hw,
+ unsigned char *addr,
+ unsigned int reg_n)
+{
+ void __iomem *ioaddr = hw->pcsr;
+
+ stmmac_get_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n),
+ EMAC_MACADDR_LO(reg_n));
+}
+
+/* caution this function must return non 0 to work */
+static int sun8i_dwmac_rx_ipc_enable(struct mac_device_info *hw)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 v;
+
+ v = readl(ioaddr + EMAC_RX_CTL0);
+ v |= EMAC_RX_DO_CRC;
+ writel(v, ioaddr + EMAC_RX_CTL0);
+
+ return 1;
+}
+
+static void sun8i_dwmac_set_filter(struct mac_device_info *hw,
+ struct net_device *dev)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 v;
+ int i = 1;
+ struct netdev_hw_addr *ha;
+ int macaddrs = netdev_uc_count(dev) + netdev_mc_count(dev) + 1;
+
+ v = EMAC_FRM_FLT_CTL;
+
+ if (dev->flags & IFF_PROMISC) {
+ v = EMAC_FRM_FLT_RXALL;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ v |= EMAC_FRM_FLT_MULTICAST;
+ } else if (macaddrs <= hw->unicast_filter_entries) {
+ if (!netdev_mc_empty(dev)) {
+ netdev_for_each_mc_addr(ha, dev) {
+ sun8i_dwmac_set_umac_addr(hw, ha->addr, i);
+ i++;
+ }
+ }
+ if (!netdev_uc_empty(dev)) {
+ netdev_for_each_uc_addr(ha, dev) {
+ sun8i_dwmac_set_umac_addr(hw, ha->addr, i);
+ i++;
+ }
+ }
+ } else {
+ netdev_info(dev, "Too many address, switching to promiscuous\n");
+ v = EMAC_FRM_FLT_RXALL;
+ }
+
+ /* Disable unused address filter slots */
+ while (i < hw->unicast_filter_entries)
+ sun8i_dwmac_set_umac_addr(hw, NULL, i++);
+
+ writel(v, ioaddr + EMAC_RX_FRM_FLT);
+}
+
+static void sun8i_dwmac_flow_ctrl(struct mac_device_info *hw,
+ unsigned int duplex, unsigned int fc,
+ unsigned int pause_time, u32 tx_cnt)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 v;
+
+ v = readl(ioaddr + EMAC_RX_CTL0);
+ if (fc == FLOW_AUTO)
+ v |= EMAC_RX_FLOW_CTL_EN;
+ else
+ v &= ~EMAC_RX_FLOW_CTL_EN;
+ writel(v, ioaddr + EMAC_RX_CTL0);
+
+ v = readl(ioaddr + EMAC_TX_FLOW_CTL);
+ if (fc == FLOW_AUTO)
+ v |= EMAC_TX_FLOW_CTL_EN;
+ else
+ v &= ~EMAC_TX_FLOW_CTL_EN;
+ writel(v, ioaddr + EMAC_TX_FLOW_CTL);
+}
+
+static int sun8i_dwmac_reset(struct stmmac_priv *priv)
+{
+ u32 v;
+ int err;
+
+ v = readl(priv->ioaddr + EMAC_BASIC_CTL1);
+ writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1);
+
+ /* The timeout was previoulsy set to 10ms, but some board (OrangePI0)
+ * need more if no cable plugged. 100ms seems OK
+ */
+ err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v,
+ !(v & 0x01), 100, 100000);
+
+ if (err) {
+ dev_err(priv->device, "EMAC reset timeout\n");
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
+{
+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+ struct device_node *node = priv->device->of_node;
+ int ret;
+ u32 reg, val;
+
+ regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val);
+ reg = gmac->variant->default_syscon_value;
+ if (reg != val)
+ dev_warn(priv->device,
+ "Current syscon value is not the default %x (expect %x)\n",
+ val, reg);
+
+ if (gmac->variant->internal_phy) {
+ if (!gmac->use_internal_phy) {
+ /* switch to external PHY interface */
+ reg &= ~H3_EPHY_SELECT;
+ } else {
+ reg |= H3_EPHY_SELECT;
+ reg &= ~H3_EPHY_SHUTDOWN;
+ dev_dbg(priv->device, "Select internal_phy %x\n", reg);
+
+ if (of_property_read_bool(priv->plat->phy_node,
+ "allwinner,leds-active-low"))
+ reg |= H3_EPHY_LED_POL;
+ else
+ reg &= ~H3_EPHY_LED_POL;
+
+ ret = of_mdio_parse_addr(priv->device,
+ priv->plat->phy_node);
+ if (ret < 0) {
+ dev_err(priv->device, "Could not parse MDIO addr\n");
+ return ret;
+ }
+ /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
+ * address. No need to mask it again.
+ */
+ reg |= ret << H3_EPHY_ADDR_SHIFT;
+ }
+ }
+
+ if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
+ if (val % 100) {
+ dev_err(priv->device, "tx-delay must be a multiple of 100\n");
+ return -EINVAL;
+ }
+ val /= 100;
+ dev_dbg(priv->device, "set tx-delay to %x\n", val);
+ if (val <= SYSCON_ETXDC_MASK) {
+ reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT);
+ reg |= (val << SYSCON_ETXDC_SHIFT);
+ } else {
+ dev_err(priv->device, "Invalid TX clock delay: %d\n",
+ val);
+ return -EINVAL;
+ }
+ }
+
+ if (!of_property_read_u32(node, "allwinner,rx-delay-ps", &val)) {
+ if (val % 100) {
+ dev_err(priv->device, "rx-delay must be a multiple of 100\n");
+ return -EINVAL;
+ }
+ val /= 100;
+ dev_dbg(priv->device, "set rx-delay to %x\n", val);
+ if (val <= SYSCON_ERXDC_MASK) {
+ reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT);
+ reg |= (val << SYSCON_ERXDC_SHIFT);
+ } else {
+ dev_err(priv->device, "Invalid RX clock delay: %d\n",
+ val);
+ return -EINVAL;
+ }
+ }
+
+ /* Clear interface mode bits */
+ reg &= ~(SYSCON_ETCS_MASK | SYSCON_EPIT);
+ if (gmac->variant->support_rmii)
+ reg &= ~SYSCON_RMII_EN;
+
+ switch (priv->plat->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ /* default */
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ reg |= SYSCON_RMII_EN | SYSCON_ETCS_EXT_GMII;
+ break;
+ default:
+ dev_err(priv->device, "Unsupported interface mode: %s",
+ phy_modes(priv->plat->interface));
+ return -EINVAL;
+ }
+
+ regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+
+ return 0;
+}
+
+static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
+{
+ u32 reg = gmac->variant->default_syscon_value;
+
+ regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+}
+
+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
+{
+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+ int ret;
+
+ if (!gmac->use_internal_phy)
+ return 0;
+
+ ret = clk_prepare_enable(gmac->ephy_clk);
+ if (ret) {
+ dev_err(priv->device, "Cannot enable ephy\n");
+ return ret;
+ }
+
+ ret = reset_control_deassert(gmac->rst_ephy);
+ if (ret) {
+ dev_err(priv->device, "Cannot deassert ephy\n");
+ clk_disable_unprepare(gmac->ephy_clk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
+{
+ if (!gmac->use_internal_phy)
+ return 0;
+
+ clk_disable_unprepare(gmac->ephy_clk);
+ reset_control_assert(gmac->rst_ephy);
+ return 0;
+}
+
+/* sun8i_power_phy() - Activate the PHY:
+ * In case of error, no need to call sun8i_unpower_phy(),
+ * it will be called anyway by sun8i_dwmac_exit()
+ */
+static int sun8i_power_phy(struct stmmac_priv *priv)
+{
+ int ret;
+
+ ret = sun8i_dwmac_power_internal_phy(priv);
+ if (ret)
+ return ret;
+
+ ret = sun8i_dwmac_set_syscon(priv);
+ if (ret)
+ return ret;
+
+ /* After changing syscon value, the MAC need reset or it will use
+ * the last value (and so the last PHY set.
+ */
+ ret = sun8i_dwmac_reset(priv);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+static void sun8i_unpower_phy(struct sunxi_priv_data *gmac)
+{
+ sun8i_dwmac_unset_syscon(gmac);
+ sun8i_dwmac_unpower_internal_phy(gmac);
+}
+
+static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
+{
+ struct sunxi_priv_data *gmac = priv;
+
+ sun8i_unpower_phy(gmac);
+
+ clk_disable_unprepare(gmac->tx_clk);
+
+ if (gmac->regulator)
+ regulator_disable(gmac->regulator);
+}
+
+static const struct stmmac_ops sun8i_dwmac_ops = {
+ .core_init = sun8i_dwmac_core_init,
+ .set_mac = sun8i_dwmac_set_mac,
+ .dump_regs = sun8i_dwmac_dump_mac_regs,
+ .rx_ipc = sun8i_dwmac_rx_ipc_enable,
+ .set_filter = sun8i_dwmac_set_filter,
+ .flow_ctrl = sun8i_dwmac_flow_ctrl,
+ .set_umac_addr = sun8i_dwmac_set_umac_addr,
+ .get_umac_addr = sun8i_dwmac_get_umac_addr,
+};
+
+static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
+{
+ struct mac_device_info *mac;
+ struct stmmac_priv *priv = ppriv;
+ int ret;
+
+ mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
+ if (!mac)
+ return NULL;
+
+ ret = sun8i_power_phy(priv);
+ if (ret)
+ return NULL;
+
+ mac->pcsr = priv->ioaddr;
+ mac->mac = &sun8i_dwmac_ops;
+ mac->dma = &sun8i_dwmac_dma_ops;
+
+ /* The loopback bit seems to be re-set when link change
+ * Simply mask it each time
+ * Speed 10/100/1000 are set in BIT(2)/BIT(3)
+ */
+ mac->link.speed_mask = GENMASK(3, 2) | EMAC_LOOPBACK;
+ mac->link.speed10 = EMAC_SPEED_10;
+ mac->link.speed100 = EMAC_SPEED_100;
+ mac->link.speed1000 = EMAC_SPEED_1000;
+ mac->link.duplex = EMAC_DUPLEX_FULL;
+ mac->mii.addr = EMAC_MDIO_CMD;
+ mac->mii.data = EMAC_MDIO_DATA;
+ mac->mii.reg_shift = 4;
+ mac->mii.reg_mask = GENMASK(8, 4);
+ mac->mii.addr_shift = 12;
+ mac->mii.addr_mask = GENMASK(16, 12);
+ mac->mii.clk_csr_shift = 20;
+ mac->mii.clk_csr_mask = GENMASK(22, 20);
+ mac->unicast_filter_entries = 8;
+
+ /* Synopsys Id is not available */
+ priv->synopsys_id = 0;
+
+ return mac;
+}
+
+static int sun8i_dwmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct sunxi_priv_data *gmac;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+ if (!gmac)
+ return -ENOMEM;
+
+ gmac->variant = of_device_get_match_data(&pdev->dev);
+ if (!gmac->variant) {
+ dev_err(&pdev->dev, "Missing dwmac-sun8i variant\n");
+ return -EINVAL;
+ }
+
+ gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
+ if (IS_ERR(gmac->tx_clk)) {
+ dev_err(dev, "Could not get TX clock\n");
+ return PTR_ERR(gmac->tx_clk);
+ }
+
+ /* Optional regulator for PHY */
+ gmac->regulator = devm_regulator_get_optional(dev, "phy");
+ if (IS_ERR(gmac->regulator)) {
+ if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_info(dev, "No regulator found\n");
+ gmac->regulator = NULL;
+ }
+
+ gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "syscon");
+ if (IS_ERR(gmac->regmap)) {
+ ret = PTR_ERR(gmac->regmap);
+ dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret);
+ return ret;
+ }
+
+ plat_dat->interface = of_get_phy_mode(dev->of_node);
+ if (plat_dat->interface == gmac->variant->internal_phy) {
+ dev_info(&pdev->dev, "Will use internal PHY\n");
+ gmac->use_internal_phy = true;
+ gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
+ if (IS_ERR(gmac->ephy_clk)) {
+ ret = PTR_ERR(gmac->ephy_clk);
+ dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret);
+ return -EINVAL;
+ }
+
+ gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+ if (IS_ERR(gmac->rst_ephy)) {
+ ret = PTR_ERR(gmac->rst_ephy);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ dev_err(&pdev->dev, "No EPHY reset control found %d\n",
+ ret);
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "Will use external PHY\n");
+ gmac->use_internal_phy = false;
+ }
+
+ /* platform data specifying hardware features and callbacks.
+ * hardware features were copied from Allwinner drivers.
+ */
+ plat_dat->rx_coe = STMMAC_RX_COE_TYPE2;
+ plat_dat->tx_coe = 1;
+ plat_dat->has_sun8i = true;
+ plat_dat->bsp_priv = gmac;
+ plat_dat->init = sun8i_dwmac_init;
+ plat_dat->exit = sun8i_dwmac_exit;
+ plat_dat->setup = sun8i_dwmac_setup;
+
+ ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv);
+ if (ret)
+ return ret;
+
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+ sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
+
+ return ret;
+}
+
+static const struct of_device_id sun8i_dwmac_match[] = {
+ { .compatible = "allwinner,sun8i-h3-emac",
+ .data = &emac_variant_h3 },
+ { .compatible = "allwinner,sun8i-a83t-emac",
+ .data = &emac_variant_a83t },
+ { .compatible = "allwinner,sun50i-a64-emac",
+ .data = &emac_variant_a64 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
+
+static struct platform_driver sun8i_dwmac_driver = {
+ .probe = sun8i_dwmac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "dwmac-sun8i",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = sun8i_dwmac_match,
+ },
+};
+module_platform_driver(sun8i_dwmac_driver);
+
+MODULE_AUTHOR("Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
+MODULE_DESCRIPTION("Allwinner sun8i DWMAC specific glue layer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c80c9c3b67db..68a188e74c54 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -235,6 +235,17 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
priv->clk_csr = STMMAC_CSR_250_300M;
}
+
+ if (priv->plat->has_sun8i) {
+ if (clk_rate > 160000000)
+ priv->clk_csr = 0x03;
+ else if (clk_rate > 80000000)
+ priv->clk_csr = 0x02;
+ else if (clk_rate > 40000000)
+ priv->clk_csr = 0x01;
+ else
+ priv->clk_csr = 0;
+ }
}
static void print_pkt(unsigned char *buf, int len)
@@ -3955,6 +3966,10 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
priv->hw = mac;
+ /* dwmac-sun8i only work in chain mode */
+ if (priv->plat->has_sun8i)
+ chain_mode = 1;
+
/* To use the chained or ring mode */
if (priv->synopsys_id >= DWMAC_CORE_4_00) {
priv->hw->mode = &dwmac4_ring_mode_ops;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 7fc3a1ef395a..3840529344ed 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -309,6 +309,12 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
struct device_node *np, struct device *dev)
{
bool mdio = true;
+ static const struct of_device_id need_mdio_ids[] = {
+ { .compatible = "snps,dwc-qos-ethernet-4.10" },
+ { .compatible = "allwinner,sun8i-a83t-emac" },
+ { .compatible = "allwinner,sun8i-h3-emac" },
+ { .compatible = "allwinner,sun50i-a64-emac" },
+ };
/* If phy-handle property is passed from DT, use it as the PHY */
plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
@@ -325,8 +331,7 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
mdio = false;
}
- /* exception for dwmac-dwc-qos-eth glue logic */
- if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
+ if (of_match_node(need_mdio_ids, np)) {
plat->mdio_node = of_get_child_by_name(np, "mdio");
} else {
/**
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 8bb550bca96d..108739ff9223 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -186,6 +186,7 @@ struct plat_stmmacenet_data {
struct reset_control *stmmac_rst;
struct stmmac_axi *axi;
int has_gmac4;
+ bool has_sun8i;
bool tso_en;
int mac_port_sel_speed;
bool en_tx_lpi_clockgating;
--
2.13.0
^ permalink raw reply related
* [PATCH v6 04/21] dt-bindings: syscon: Add DT bindings documentation for Allwinner syscon
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
In-Reply-To: <20170531071852.12422-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch adds documentation for Device-Tree bindings for the
syscon present in allwinner devices.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/misc/allwinner,syscon.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/allwinner,syscon.txt
diff --git a/Documentation/devicetree/bindings/misc/allwinner,syscon.txt b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
new file mode 100644
index 000000000000..cb5769137c6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
@@ -0,0 +1,19 @@
+* Allwinner sun8i system controller
+
+This file describes the bindings for the system controller present in
+Allwinner SoC H3, A83T and A64.
+The principal function of this syscon is to control EMAC PHY choice and
+config.
+
+Required properties for the system controller:
+- reg: address and length of the register for the device.
+- compatible: should be "syscon" and one of the following string:
+ "allwinner,sun8i-h3-system-controller"
+ "allwinner,sun50i-a64-system-controller"
+ "allwinner,sun8i-a83t-system-controller"
+
+Example:
+syscon: syscon@1c00000 {
+ compatible = "allwinner,sun8i-h3-system-controller", "syscon";
+ reg = <0x01c00000 0x1000>;
+};
--
2.13.0
^ permalink raw reply related
* [PATCH v6 03/21] dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
In-Reply-To: <20170531071852.12422-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch adds documentation for Device-Tree bindings for the
Allwinner dwmac-sun8i driver.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/net/dwmac-sun8i.txt | 78 ++++++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
new file mode 100644
index 000000000000..08e708c73193
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -0,0 +1,78 @@
+* Allwinner sun8i GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+- compatible: should be one of the following string:
+ "allwinner,sun8i-a83t-emac"
+ "allwinner,sun8i-h3-emac"
+ "allwinner,sun50i-a64-emac"
+- reg: address and length of the register for the device.
+- interrupts: interrupt for the device
+- interrupt-names: should be "macirq"
+- clocks: A phandle to the reference clock for this device
+- clock-names: should be "stmmaceth"
+- resets: A phandle to the reset control for this device
+- reset-names: should be "stmmaceth"
+- phy-mode: See ethernet.txt
+- phy-handle: See ethernet.txt
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+- syscon: A phandle to the syscon of the SoC with one of the following
+ compatible string:
+ - allwinner,sun8i-h3-system-controller
+ - allwinner,sun50i-a64-system-controller
+ - allwinner,sun8i-a83t-system-controller
+
+Optional properties:
+- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
+- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
+Both delay properties need to be a multiple of 100. They control the delay for
+external PHY.
+
+Optional properties for "allwinner,sun8i-h3-emac":
+- allwinner,leds-active-low: EPHY LEDs are active low
+
+Required child node of emac:
+- mdio bus node: should be named mdio
+
+Required properties of the mdio node:
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
+The device node referenced by "phy" or "phy-handle" should be a child node
+of the mdio node. See phy.txt for the generic PHY bindings.
+
+Required properties of the phy node with "allwinner,sun8i-h3-emac":
+- clocks: a phandle to the reference clock for the EPHY
+- resets: a phandle to the reset control for the EPHY
+
+Example:
+
+emac: ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ int_mii_phy: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+};
--
2.13.0
^ permalink raw reply related
* [PATCH v6 02/21] net-next: stmmac: add optional setup function
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
In-Reply-To: <20170531071852.12422-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Instead of adding more ifthen logic for adding a new mac_device_info
setup function, it is easier to add a function pointer to the function
needed.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++-
include/linux/stmmac.h | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f158273eab9b..c80c9c3b67db 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3933,7 +3933,9 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
struct mac_device_info *mac;
/* Identify the MAC HW device */
- if (priv->plat->has_gmac) {
+ if (priv->plat->setup) {
+ mac = priv->plat->setup(priv);
+ } else if (priv->plat->has_gmac) {
priv->dev->priv_flags |= IFF_UNICAST_FLT;
mac = dwmac1000_setup(priv->ioaddr,
priv->plat->multicast_filter_bins,
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 3921cb9dfadb..8bb550bca96d 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -177,6 +177,7 @@ struct plat_stmmacenet_data {
void (*fix_mac_speed)(void *priv, unsigned int speed);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
+ struct mac_device_info *(*setup)(void *priv);
void *bsp_priv;
struct clk *stmmac_clk;
struct clk *pclk;
--
2.13.0
^ permalink raw reply related
* [PATCH v6 01/21] net-next: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
In-Reply-To: <20170531071852.12422-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Thoses symbol will be needed for the dwmac-sun8i ethernet driver.
For letting it to be build as module, they need to be exported.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
index 38f94305aab5..67af0bdd7f10 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
@@ -248,6 +248,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
writel(data, ioaddr + low);
}
+EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);
/* Enable disable MAC RX/TX */
void stmmac_set_mac(void __iomem *ioaddr, bool enable)
@@ -279,4 +280,4 @@ void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
addr[4] = hi_addr & 0xff;
addr[5] = (hi_addr >> 8) & 0xff;
}
-
+EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);
--
2.13.0
^ permalink raw reply related
* [PATCH v6 00/21] net-next: stmmac: add dwmac-sun8i ethernet driver
From: Corentin Labbe @ 2017-05-31 7:18 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Corentin Labbe
Hello
This patch series add the driver for dwmac-sun8i which handle the Ethernet MAC
present on Allwinner H3/H5/A83T/A64 SoCs.
This driver is the continuation of the sun8i-emac driver.
During the development, it appeared that in fact the hardware was a modified
version of some dwmac.
So the driver is now written as a glue driver for stmmac.
It supports 10/100/1000 Mbit/s speed with half/full duplex.
It can use an internal PHY (MII 10/100) or an external PHY
via RGMII/RMII.
This patch series enable the driver only for the H3/A64/H5 SoC since A83T
doesn't have the necessary clocks present in mainline.
The driver have been tested on the following boards:
- H3 Orange PI PC, BananaPI-M2+
- A64 Pine64, BananaPi-M64
- A83T BananaPI-M3
The first two patchs are some mandatory changes for letting dwmac-sun8i be used.
The following three patchs add the driver and its documentation.
The remaining are DT patch enabling it.
Regards
Corentin Labbe
Changes since v5:
- Added DT patch for NanoPi neo
- Use the new adjust_link variables (speedxxx/speedmask)
- Made the timeout of readl_poll_timeout from 10 to 100ms
- Fix sun8i_unpower_phy that could be called twice
- Replace phy by phy-handle in doc/dwmac-sun8i.txt
Changes since v4:
- Re-ordered by alphabetical order some DT nodes
- Simplified power/unpower_phy functions by testing the use of internal_phy
- Added a patch for adding dwmac-sun8i to arm64 defconfig
- Fix a typo in sun50i-a64-system-controller (wrongly used sun8i)
- Reworked uc/mc filter address setting
Changes since v3:
- Renamed tx-delay/rx-delay to tx-delay-ps/rx-delay-ps
- fix syscon compatible example
- Changed parameter type for setup() function
- Dropped some DT patchs for boards which I could not test further
Changes since v2:
- corrected order of syscon compatible
- added compatible = "ethernet-phy-ieee802.3-c22 to PHY
- added set_mac function
Changes since v1:
- added TX/RX delay units
- splitted syscon documentation in its own patch
- regulator is now disabled after clk_prepare_enable(gmac->tx_clk) error
- Fixed a memory leak on mac_device_info
- Use now generic pin config for all DT stuff
- CONFIG_DWMAC_SUN8I is now set to y in defconfigs
Corentin Labbe (21):
net-next: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr
net-next: stmmac: add optional setup function
dt-bindings: net-next: Add DT bindings documentation for Allwinner
dwmac-sun8i
dt-bindings: syscon: Add DT bindings documentation for Allwinner
syscon
net-next: stmmac: Add dwmac-sun8i
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: orangepi-pc: Enable dwmac-sun8i
arm: sun8i: orangepi-zero: Enable dwmac-sun8i
arm: sun8i: orangepi-one: Enable dwmac-sun8i
arm: sun8i: orangepi-2: Enable dwmac-sun8i
arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high
arm: sun8i: nanopi-neo: Enable dwmac-sun8i
arm64: allwinner: sun50i-a64: Add dt node for the syscon control
module
arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
arm64: allwinner: pine64: Enable dwmac-sun8i
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
arm: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig
arm: multi_v7: Enable dwmac-sun8i driver on multi_v7_defconfig
arm64: defconfig: Enable dwmac-sun8i driver on defconfig
.../devicetree/bindings/misc/allwinner,syscon.txt | 19 +
.../devicetree/bindings/net/dwmac-sun8i.txt | 78 ++
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 8 +
arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 7 +
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 +
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 +
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 40 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/configs/sunxi_defconfig | 1 +
.../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 15 +
.../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 17 +-
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 +
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 41 +
arch/arm64/configs/defconfig | 1 +
drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 +
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 990 +++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +-
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 +-
include/linux/stmmac.h | 2 +
23 files changed, 1303 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/misc/allwinner,syscon.txt
create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
--
2.13.0
^ permalink raw reply
* [PATCH] mISDN: Fix a sleep-in-atomic bug
From: Jia-Ju Bai @ 2017-05-31 7:08 UTC (permalink / raw)
To: isdn, mingo, fweisbec, geliangtang, akpm, davem, yamada.masahiro
Cc: netdev, linux-kernel, Jia-Ju Bai
The driver may sleep under a read spin lock, and the function call path is:
send_socklist (acquire the lock by read_lock)
skb_copy(GFP_KERNEL) --> may sleep
To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
---
drivers/isdn/mISDN/stack.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index 8b7faea..422dced 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -75,7 +75,7 @@
if (sk->sk_state != MISDN_BOUND)
continue;
if (!cskb)
- cskb = skb_copy(skb, GFP_KERNEL);
+ cskb = skb_copy(skb, GFP_ATOMIC);
if (!cskb) {
printk(KERN_WARNING "%s no skb\n", __func__);
break;
--
1.7.9.5
^ permalink raw reply related
* [PATCH net] mpls: fix clearing of dead nh_flags on link up
From: Roopa Prabhu @ 2017-05-31 6:50 UTC (permalink / raw)
To: davem; +Cc: netdev, dsahern
From: Roopa Prabhu <roopa@cumulusnetworks.com>
recent fixes to use WRITE_ONCE for nh_flags on link up,
accidently ended up leaving the deadflags on a nh. This patch
fixes the WRITE_ONCE to use freshly evaluated nh_flags.
Fixes: 39eb8cd17588 ("net: mpls: rt_nhn_alive and nh_flags should be accessed using READ_ONCE")
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
---
net/mpls/af_mpls.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c
index 94b3317..b51582d 100644
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -1483,7 +1483,7 @@ static void mpls_ifup(struct net_device *dev, unsigned int flags)
continue;
alive++;
nh_flags &= ~flags;
- WRITE_ONCE(nh->nh_flags, flags);
+ WRITE_ONCE(nh->nh_flags, nh_flags);
} endfor_nexthops(rt);
WRITE_ONCE(rt->rt_nhn_alive, alive);
--
1.9.1
^ permalink raw reply related
* Re: [PULL] topic/e1000e-fix
From: Daniel Vetter @ 2017-05-31 6:10 UTC (permalink / raw)
To: Dave Airlie
Cc: netdev, intel-gfx@lists.freedesktop.org,
Linux Kernel Mailing List, intel-wired-lan, dri-devel,
David Miller, Jeff Kirsher
In-Reply-To: <CAKMK7uF-b1U7qipgEoYnAjDtrNdvKYT4KkoV2=krikkdGERkCw@mail.gmail.com>
On Wed, May 31, 2017 at 7:54 AM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> On Wed, May 31, 2017 at 1:06 AM, Dave Airlie <airlied@gmail.com> wrote:
>> On 31 May 2017 at 08:10, David Miller <davem@davemloft.net> wrote:
>>> From: Daniel Vetter <daniel.vetter@ffwll.ch>
>>> Date: Tue, 30 May 2017 22:15:42 +0200
>>>
>>>> If the e1000e maintainer wants to coalesce or not return statements
>>>> this simple way, that's imo on him to change the color as needed.
>>>
>>> That's not how things work.
>>>
>>> If the maintainer wants you to style things a certain way, either you
>>> do it that way or your patch isn't accepted.
>
> Consider this pull a regression report, pls handle it.
And I guess I pile of more cc, to make this regression report
complete. I mean you got the backtrace, bisect and a proposed fix, and
the almost-whitespace change demanded is something gcc does in its
sleep. I'd understand a request to retest if it would be a real
functional change, but in this situation I have no idea why this
regression just can't be fixed already.
Not sure if it's really preferred if regression reports come
incomplete, without bugfix and bisect attached.
-Daniel
>> I'm not really sure why Chris just couldn't respin already.
>>
>> Though really I think Chris should have just asked for a revert of the
>> original patch that broke stuff, instead of trying to patch a driver
>> if he doesn't have time to get the patch right for the maintainer.
>
> Ok, can we pls revert 2800209994f8 ("e1000e: Refactor PM flows") then?
>
> Thanks, Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply
* [PATCH net-next] powerpc: use asm-generic/socket.h as much as possible
From: Stephen Rothwell @ 2017-05-31 5:43 UTC (permalink / raw)
To: David Miller, Networking
Cc: Michael Ellerman, Benjamin Herrenschmidt, PowerPC, Arnd Bergmann
asm-generic/socket.h already has an exception for the differences that
powerpc needs, so just include it after defining the differences.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/include/uapi/asm/socket.h | 92 +---------------------------------
1 file changed, 1 insertion(+), 91 deletions(-)
Build tested using powerpc allyesconfig, pseries_le_defconfig, 32 bit
and 64 bit allnoconfig and ppc44x_defconfig builds.
Dave, this is on top of the net-next tree and I am sending it to you
since it would produce a conflict if it was merged via the powerpc tree.
diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h
index bc4ca72faf99..3c590c7c42c0 100644
--- a/arch/powerpc/include/uapi/asm/socket.h
+++ b/arch/powerpc/include/uapi/asm/socket.h
@@ -8,28 +8,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-#define SO_REUSEPORT 15
#define SO_RCVLOWAT 16
#define SO_SNDLOWAT 17
#define SO_RCVTIMEO 18
@@ -37,74 +15,6 @@
#define SO_PASSCRED 20
#define SO_PEERCRED 21
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-#define SO_GET_FILTER SO_ATTACH_FILTER
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#define SO_PROTOCOL 38
-#define SO_DOMAIN 39
-
-#define SO_RXQ_OVFL 40
-
-#define SO_WIFI_STATUS 41
-#define SCM_WIFI_STATUS SO_WIFI_STATUS
-#define SO_PEEK_OFF 42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS 43
-
-#define SO_LOCK_FILTER 44
-
-#define SO_SELECT_ERR_QUEUE 45
-
-#define SO_BUSY_POLL 46
-
-#define SO_MAX_PACING_RATE 47
-
-#define SO_BPF_EXTENSIONS 48
-
-#define SO_INCOMING_CPU 49
-
-#define SO_ATTACH_BPF 50
-#define SO_DETACH_BPF SO_DETACH_FILTER
-
-#define SO_ATTACH_REUSEPORT_CBPF 51
-#define SO_ATTACH_REUSEPORT_EBPF 52
-
-#define SO_CNX_ADVICE 53
-
-#define SCM_TIMESTAMPING_OPT_STATS 54
-
-#define SO_MEMINFO 55
-
-#define SO_INCOMING_NAPI_ID 56
-
-#define SO_COOKIE 57
-
-#define SCM_TIMESTAMPING_PKTINFO 58
+#include <asm-generic/socket.h>
#endif /* _ASM_POWERPC_SOCKET_H */
--
2.11.0
--
Cheers,
Stephen Rothwell
^ permalink raw reply related
* Re: [PATCH net-next 0/8] Introduce bpf ID
From: Martin KaFai Lau @ 2017-05-31 4:30 UTC (permalink / raw)
To: David Ahern; +Cc: netdev, Alexei Starovoitov, Daniel Borkmann, kernel-team
In-Reply-To: <19cd3d0a-12eb-b8ca-a054-62d86ba2a509@gmail.com>
On Tue, May 30, 2017 at 06:35:37PM -0600, David Ahern wrote:
> On 5/30/17 6:08 PM, Martin KaFai Lau wrote:
> > This patch series:
> > 1) Introduce ID for both bpf_prog and bpf_map.
> > 2) Add bpf commands to iterate the prog IDs and map
> > IDs of the system.
> > 3) Add bpf commands to get a prog/map fd from an ID
> > 4) Add bpf command to get prog/map info from a fd.
> > The prog/map info is a jump start in this patchset
> > and it is not meant to be a complete list. They can
> > be extended in the future patches.
>
> Interesting. This really simplifies the bpf retrieval I have been
> working on:
> https://github.com/dsahern/linux/commits/bpf/retrieve-bpf-wip
>
> Having the net device, filter, route, socket, cgroup, etc return the ids
> for attached programs solves the problem of getting a reference to all
> of the places BPF programs can be placed.
Right, it is the idea.
I am also baking some follow-up patches for returning xdp-prog's id
through netlink.
>
> This patch set turns an id into a fd, and my patches allow the fd to be
> used to get the bpf code.
^ permalink raw reply
* Re: [PATCH 1/2] ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy properties
From: Fabio Estevam @ 2017-05-31 4:08 UTC (permalink / raw)
To: Leonard Crestez
Cc: Shawn Guo, Florian Fainelli, Andrew Lunn, Andy Duan,
netdev@vger.kernel.org, Johan Hovold, linux-kernel,
Alexandre Belloni, Philipp Zabel, Fabio Estevam,
linux-arm-kernel@lists.infradead.org
In-Reply-To: <d31aab90fbdecaf4c5f240becb2d0b0efb23f5c3.1496164448.git.leonard.crestez@nxp.com>
On Tue, May 30, 2017 at 2:34 PM, Leonard Crestez
<leonard.crestez@nxp.com> wrote:
> Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same
> register values can be set through the micrel phy driver by using dts
> properties.
>
> This seems preferable and allows cleanly fixing suspend/resume.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply
* Re: [net-bluetooth] question about potential null pointer dereference
From: Gustavo A. R. Silva @ 2017-05-31 3:36 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Gustavo F. Padovan, Johan Hedberg, David S. Miller,
open list:BLUETOOTH DRIVERS, netdev, linux-kernel
In-Reply-To: <20170530222953.Horde.lmsiZcFwJeJ7pN4QQZ_Fyk7@gator4166.hostgator.com>
Hi Marcel,
Quoting "Gustavo A. R. Silva" <garsilva@embeddedor.com>:
> Hi Marcel,
>
> Quoting Marcel Holtmann <marcel@holtmann.org>:
>
>> Hi Gustavo,
>>
>>> While looking into Coverity ID 1357456 I ran into the following
>>> piece of code at net/bluetooth/smp.c:166
>>>
>>> 166/* The following functions map to the LE SC SMP crypto functions
>>> 167 * AES-CMAC, f4, f5, f6, g2 and h6.
>>> 168 */
>>> 169
>>> 170static int aes_cmac(struct crypto_shash *tfm, const u8 k[16],
>>> const u8 *m,
>>> 171 size_t len, u8 mac[16])
>>> 172{
>>> 173 uint8_t tmp[16], mac_msb[16], msg_msb[CMAC_MSG_MAX];
>>> 174 SHASH_DESC_ON_STACK(desc, tfm);
>>> 175 int err;
>>> 176
>>> 177 if (len > CMAC_MSG_MAX)
>>> 178 return -EFBIG;
>>> 179
>>> 180 if (!tfm) {
>>> 181 BT_ERR("tfm %p", tfm);
>>> 182 return -EINVAL;
>>> 183 }
>>> 184
BTW, what do you think about removing the IF block above?
>>> 185 desc->tfm = tfm;
>>> 186 desc->flags = 0;
>>> 187
>>> 188 /* Swap key and message from LSB to MSB */
>>> 189 swap_buf(k, tmp, 16);
>>> 190 swap_buf(m, msg_msb, len);
>>> 191
>>> 192 SMP_DBG("msg (len %zu) %*phN", len, (int) len, m);
>>> 193 SMP_DBG("key %16phN", k);
>>> 194
>>> 195 err = crypto_shash_setkey(tfm, tmp, 16);
>>> 196 if (err) {
>>> 197 BT_ERR("cipher setkey failed: %d", err);
>>> 198 return err;
>>> 199 }
>>> 200
>>> 201 err = crypto_shash_digest(desc, msg_msb, len, mac_msb);
>>> 202 shash_desc_zero(desc);
>>> 203 if (err) {
>>> 204 BT_ERR("Hash computation error %d", err);
>>> 205 return err;
>>> 206 }
>>> 207
>>> 208 swap_buf(mac_msb, mac, 16);
>>> 209
>>> 210 SMP_DBG("mac %16phN", mac);
>>> 211
>>> 212 return 0;
>>> 213}
>>>
>>> The issue here is that line 180 implies that pointer tfm might be
>>> NULL. If this is the case, there is a potential NULL pointer
>>> dereference at line 174 once pointer tfm is indirectly
>>> dereferenced inside macro SHASH_DESC_ON_STACK().
>>>
>>> My question is if there is any chance that pointer tfm maybe be
>>> NULL when calling macro SHASH_DESC_ON_STACK()?
>>
>> I think the part you are after is this:
>>
>> smp->tfm_cmac = crypto_alloc_shash("cmac(aes)", 0, 0);
>> if (IS_ERR(smp->tfm_cmac)) {
>> BT_ERR("Unable to create CMAC crypto context");
>> crypto_free_cipher(smp->tfm_aes);
>> kzfree(smp);
>> return NULL;
>> }
>>
>
> Yeah, this makes it all clear.
>
>> So the tfm_cmac is part of the smp structure. However if there is
>> no cipher, we destroy the smp structure and essentially run without
>> SMP support. So it can not really be called anyway.
>>
>
> What I take from this is that as a general rule, I should first try
> to identify whether the code I'm debugging is reachable or not,
> depending on the specific structures and variables I'm interested in.
>
>> Maybe commenting this might be a good idea.
>>
>
> Yep, it wouldn't hurt.
>
> In the meantime I will triage and document this as a false positive.
>
> Thank you very much for the clarification, Marcel,
> I really appreciate it.
> --
> Gustavo A. R. Silva
Thanks
--
Gustavo A. R. Silva
^ permalink raw reply
* Re: [net-bluetooth] question about potential null pointer dereference
From: Gustavo A. R. Silva @ 2017-05-31 3:29 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Gustavo F. Padovan, Johan Hedberg, David S. Miller,
open list:BLUETOOTH DRIVERS, netdev, linux-kernel
In-Reply-To: <62DD828F-D88E-4916-BD0B-347E433ACCE6@holtmann.org>
Hi Marcel,
Quoting Marcel Holtmann <marcel@holtmann.org>:
> Hi Gustavo,
>
>> While looking into Coverity ID 1357456 I ran into the following
>> piece of code at net/bluetooth/smp.c:166
>>
>> 166/* The following functions map to the LE SC SMP crypto functions
>> 167 * AES-CMAC, f4, f5, f6, g2 and h6.
>> 168 */
>> 169
>> 170static int aes_cmac(struct crypto_shash *tfm, const u8 k[16],
>> const u8 *m,
>> 171 size_t len, u8 mac[16])
>> 172{
>> 173 uint8_t tmp[16], mac_msb[16], msg_msb[CMAC_MSG_MAX];
>> 174 SHASH_DESC_ON_STACK(desc, tfm);
>> 175 int err;
>> 176
>> 177 if (len > CMAC_MSG_MAX)
>> 178 return -EFBIG;
>> 179
>> 180 if (!tfm) {
>> 181 BT_ERR("tfm %p", tfm);
>> 182 return -EINVAL;
>> 183 }
>> 184
>> 185 desc->tfm = tfm;
>> 186 desc->flags = 0;
>> 187
>> 188 /* Swap key and message from LSB to MSB */
>> 189 swap_buf(k, tmp, 16);
>> 190 swap_buf(m, msg_msb, len);
>> 191
>> 192 SMP_DBG("msg (len %zu) %*phN", len, (int) len, m);
>> 193 SMP_DBG("key %16phN", k);
>> 194
>> 195 err = crypto_shash_setkey(tfm, tmp, 16);
>> 196 if (err) {
>> 197 BT_ERR("cipher setkey failed: %d", err);
>> 198 return err;
>> 199 }
>> 200
>> 201 err = crypto_shash_digest(desc, msg_msb, len, mac_msb);
>> 202 shash_desc_zero(desc);
>> 203 if (err) {
>> 204 BT_ERR("Hash computation error %d", err);
>> 205 return err;
>> 206 }
>> 207
>> 208 swap_buf(mac_msb, mac, 16);
>> 209
>> 210 SMP_DBG("mac %16phN", mac);
>> 211
>> 212 return 0;
>> 213}
>>
>> The issue here is that line 180 implies that pointer tfm might be
>> NULL. If this is the case, there is a potential NULL pointer
>> dereference at line 174 once pointer tfm is indirectly dereferenced
>> inside macro SHASH_DESC_ON_STACK().
>>
>> My question is if there is any chance that pointer tfm maybe be
>> NULL when calling macro SHASH_DESC_ON_STACK()?
>
> I think the part you are after is this:
>
> smp->tfm_cmac = crypto_alloc_shash("cmac(aes)", 0, 0);
> if (IS_ERR(smp->tfm_cmac)) {
> BT_ERR("Unable to create CMAC crypto context");
> crypto_free_cipher(smp->tfm_aes);
> kzfree(smp);
> return NULL;
> }
>
Yeah, this makes it all clear.
> So the tfm_cmac is part of the smp structure. However if there is no
> cipher, we destroy the smp structure and essentially run without SMP
> support. So it can not really be called anyway.
>
What I take from this is that as a general rule, I should first try to
identify whether the code I'm debugging is reachable or not, depending
on the specific structures and variables I'm interested in.
> Maybe commenting this might be a good idea.
>
Yep, it wouldn't hurt.
In the meantime I will triage and document this as a false positive.
Thank you very much for the clarification, Marcel,
I really appreciate it.
--
Gustavo A. R. Silva
^ permalink raw reply
* Re: [PATCH net-next 4/8] bpf: Add BPF_PROG_GET_FD_BY_ID
From: kbuild test robot @ 2017-05-31 3:21 UTC (permalink / raw)
To: Martin KaFai Lau
Cc: kbuild-all, netdev, Alexei Starovoitov, Daniel Borkmann,
kernel-team
In-Reply-To: <f149f2b1d90960adbfac2ea6546d6f7014e49494.1496189155.git.kafai@fb.com>
[-- Attachment #1: Type: text/plain, Size: 2104 bytes --]
Hi Martin,
[auto build test ERROR on net-next/master]
url: https://github.com/0day-ci/linux/commits/Martin-KaFai-Lau/bpf-Introduce-bpf_prog-ID/20170531-110650
config: x86_64-randconfig-x015-201722 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
In file included from arch/x86/include/asm/bug.h:81:0,
from include/linux/bug.h:4,
from include/linux/thread_info.h:11,
from arch/x86/include/asm/preempt.h:6,
from include/linux/preempt.h:80,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:35,
from include/linux/time.h:5,
from include/linux/ktime.h:24,
from include/linux/timer.h:5,
from include/linux/workqueue.h:8,
from include/linux/bpf.h:12,
from kernel/bpf/syscall.c:12:
kernel/bpf/syscall.c: In function 'bpf_prog_inc_not_zero':
>> kernel/bpf/syscall.c:834:16: error: implicit declaration of function 'lockdep_is_held' [-Werror=implicit-function-declaration]
WARN_ON_ONCE(!lockdep_is_held(&prog_idr_lock));
^
include/asm-generic/bug.h:65:25: note: in definition of macro 'WARN_ON_ONCE'
int __ret_warn_on = !!(condition); \
^~~~~~~~~
cc1: some warnings being treated as errors
vim +/lockdep_is_held +834 kernel/bpf/syscall.c
828 EXPORT_SYMBOL_GPL(bpf_prog_inc);
829
830 static struct bpf_prog *bpf_prog_inc_not_zero(struct bpf_prog *prog)
831 {
832 int refold;
833
> 834 WARN_ON_ONCE(!lockdep_is_held(&prog_idr_lock));
835 refold = __atomic_add_unless(&prog->aux->refcnt, 1, 0);
836
837 if (refold >= BPF_MAX_REFCNT) {
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28833 bytes --]
^ permalink raw reply
* Re: [PATCH net-next] bnxt_en: Fix xmit_more with BQL.
From: David Miller @ 2017-05-31 2:38 UTC (permalink / raw)
To: michael.chan; +Cc: netdev
In-Reply-To: <1496188980-13392-1-git-send-email-michael.chan@broadcom.com>
From: Michael Chan <michael.chan@broadcom.com>
Date: Tue, 30 May 2017 20:03:00 -0400
> We need to write the doorbell if BQL has stopped the queue and
> skb->xmit_more is set. Otherwise it is possible for the tx queue to
> rot and cause tx timeout.
>
> Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.")
> Suggested-by: Yuval Mintz <yuval.mintz@cavium.com>
> Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Applied, thanks.
^ permalink raw reply
* [PATCH] enic: Fix another sleep-in-atomic bug
From: Jia-Ju Bai @ 2017-05-31 2:43 UTC (permalink / raw)
To: benve, _govind, neepatel; +Cc: netdev, linux-kernel, Jia-Ju Bai
The driver may sleep under a spin lock in some function call paths.
The 1st function call path is:
enic_tx_hang_reset (acquire the lock by spin_lock)
enic_stop
enic_synchronize_irqs
synchronize_irq --> may sleep
The 2nd function call path is:
enic_tx_hang_reset (acquire the lock by spin_lock)
enic_dev_wait
schedule_timeout_uninterruptible --> may sleep
The 3rd function call path is:
enic_tx_hang_reset (acquire the lock by spin_lock)
enic_open
enic_request_intr
enic_set_rx_cpu_rmap
enic_free_rx_cpu_rmap
free_irq_cpu_rmap --> may sleep
To fix it, the "spin_lock" and "spin_unlock" are removed
in enic_tx_hang_reset.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 4b87bee..d6523e2 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2330,7 +2330,6 @@ static void enic_tx_hang_reset(struct work_struct *work)
rtnl_lock();
- spin_lock(&enic->enic_api_lock);
enic_dev_hang_notify(enic);
enic_stop(enic->netdev);
enic_dev_hang_reset(enic);
@@ -2339,7 +2338,6 @@ static void enic_tx_hang_reset(struct work_struct *work)
enic_set_rss_nic_cfg(enic);
enic_dev_set_ig_vlan_rewrite_mode(enic);
enic_open(enic->netdev);
- spin_unlock(&enic->enic_api_lock);
call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
rtnl_unlock();
--
1.7.9.5
^ permalink raw reply related
* [PATCH] enic: Fix a sleep-in-atomic bug
From: Jia-Ju Bai @ 2017-05-31 2:34 UTC (permalink / raw)
To: benve, _govind, neepatel; +Cc: netdev, linux-kernel, Jia-Ju Bai
The driver may sleep under a spin lock in some function call paths.
The 1st function call path is:
enic_reset (acquire the lock by spin_lock)
enic_stop
enic_synchronize_irqs
synchronize_irq --> may sleep
The 2nd function call path is:
enic_reset (acquire the lock by spin_lock)
enic_dev_soft_reset
enic_dev_wait
schedule_timeout_uninterruptible --> may sleep
The 3rd function call path is:
enic_reset (acquire the lock by spin_lock)
enic_open
enic_request_intr
enic_set_rx_cpu_rmap
enic_free_rx_cpu_rmap
free_irq_cpu_rmap --> may sleep
To fix it, the "spin_lock" and "spin_unlock" are removed in enic_reset.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 4b87bee..2a9bef8 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2310,7 +2310,6 @@ static void enic_reset(struct work_struct *work)
rtnl_lock();
- spin_lock(&enic->enic_api_lock);
enic_stop(enic->netdev);
enic_dev_soft_reset(enic);
enic_reset_addr_lists(enic);
@@ -2318,7 +2317,6 @@ static void enic_reset(struct work_struct *work)
enic_set_rss_nic_cfg(enic);
enic_dev_set_ig_vlan_rewrite_mode(enic);
enic_open(enic->netdev);
- spin_unlock(&enic->enic_api_lock);
call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
rtnl_unlock();
--
1.7.9.5
^ permalink raw reply related
* [PATCH] i40e: Fix a sleep-in-atomic bug
From: Jia-Ju Bai @ 2017-05-31 2:12 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: intel-wired-lan, netdev, linux-kernel, Jia-Ju Bai
The driver may sleep under a spin lock, and the function call path is:
i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh)
i40e_vsi_remove_pvid
i40e_vlan_stripping_disable
i40e_aq_update_vsi_params
i40e_asq_send_command
mutex_lock --> may sleep
To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and
the lock is acquired again after this function.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 95c23fb..0fb38ca 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -3017,10 +3017,12 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
VLAN_VID_MASK));
}
+ spin_unlock_bh(&vsi->mac_filter_hash_lock);
if (vlan_id || qos)
ret = i40e_vsi_add_pvid(vsi, vlanprio);
else
i40e_vsi_remove_pvid(vsi);
+ spin_lock_bh(&vsi->mac_filter_hash_lock);
if (vlan_id) {
dev_info(&pf->pdev->dev, "Setting VLAN %d, QOS 0x%x on VF %d\n",
--
1.7.9.5
^ permalink raw reply related
* Re: Deleting a dynamic mac entry..
From: Manohar Kumar @ 2017-05-31 1:50 UTC (permalink / raw)
To: Toshiaki Makita; +Cc: netdev, bridge
In-Reply-To: <45967005-7501-6c96-eb95-f83c5f631277@lab.ntt.co.jp>
Please see inline..
On Fri, May 26, 2017 at 1:15 AM, Toshiaki Makita
<makita.toshiaki@lab.ntt.co.jp> wrote:
> On 2017/05/26 14:08, Manohar Kumar wrote:
>> On Wed, May 24, 2017 at 6:11 PM, Toshiaki Makita
>> <makita.toshiaki@lab.ntt.co.jp> wrote:
>>> On 2017/05/25 3:05, Manohar Kumar wrote:
>>>> Thanks, Toshiaki.
>>>>
>>>> What is the right way to set the default_pvid using the bridge command
>>>> ? I tried this, which fails..
>>>>
>>>> root@net-3:~# ip link set dev vxlan0 name untagged type vlan id 0
>>>> RTNETLINK answers: Operation not supported
>>>> root@net-3:~#
>>>>
>>>> All the interfaces in the bridge are untagged.
>>>
>>> # ip link set br0 down
>>> # echo 0 > /sys/class/net/br0/bridge/default_pvid
>>>
>>
>> I have the bridge inside a network namespace. There is no
>> /sys/class/net entry for the bridge interface inside the namespace.
>>
>> I see online references to this concept of 'tagged' sysfs directories
>> to support namespaces. But its not clear how to access the sysfs
>> entries for a particular namespace.
>
> Did you remount /sys after entering netns?
No, that was the problem. Mounting /sys did the trick. Appreciate your help.
Trying to understanding this better. How is the sysfs tree maintained
per network namespace ? I assume only the /sys/class/net is per
network namespace and the rest of the /sys is shared with the host
namespace ? Also, how does mounting /sys in the network namespace make
the new /sys/class/net tree visible ?
thanks,
Manohar.
> If not, remount /sys or use "ip netns" which automatically do it.
>
>> Is there any other way to set the default_pvid for the bridge
>> interface inside namespace ?
>
> No, as of 3.19.
>
>
> Toshiaki Makita
>
^ permalink raw reply
* [PATCH] isdn: Fix a sleep-in-atomic bug
From: Jia-Ju Bai @ 2017-05-31 1:40 UTC (permalink / raw)
To: isdn, davem, geliangtang, keescook; +Cc: netdev, linux-kernel, Jia-Ju Bai
The driver may sleep under a spin lock, the function call path is:
isdn_ppp_mp_receive (acquire the lock)
isdn_ppp_mp_reassembly
isdn_ppp_push_higher
isdn_ppp_decompress
isdn_ppp_ccp_reset_trans
isdn_ppp_ccp_reset_alloc_state
kzalloc(GFP_KERNEL) --> may sleep
To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
---
drivers/isdn/i4l/isdn_ppp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index d07dd519..8aa158a 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -2364,7 +2364,7 @@ static struct ippp_ccp_reset_state *isdn_ppp_ccp_reset_alloc_state(struct ippp_s
id);
return NULL;
} else {
- rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_KERNEL);
+ rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_ATOMIC);
if (!rs)
return NULL;
rs->state = CCPResetIdle;
--
1.7.9.5
^ permalink raw reply related
* Re: [i40e] regression on TCP stream and TCP maerts, kernel-4.12.0-0.rc2
From: Alexander Duyck @ 2017-05-31 1:27 UTC (permalink / raw)
To: Adam Okuliar, Mitch Williams, intel-wired-lan
Cc: Netdev, Adrian Tomasov, Jeff Kirsher, Otto Sabart, Jirka Hladky
In-Reply-To: <CAKgT0UcdJQWqr_zxxi36a6_3iMwBNow-YS723i7t6xsKvAqvCA@mail.gmail.com>
On Tue, May 30, 2017 at 8:41 AM, Alexander Duyck
<alexander.duyck@gmail.com> wrote:
> On Tue, May 30, 2017 at 6:43 AM, Adam Okuliar <aokuliar@redhat.com> wrote:
>> Hello,
>>
>> we found regression on intel card(XL710) with i40e driver. Regression is
>> about ~45%
>> on TCP_STREAM and TCP_MAERTS test for IPv4 and IPv6. Regression was first
>> visible in kernel-4.12.0-0.rc1.
>>
>> More details about results you can see in uploaded images in bugzilla. [0]
>>
>>
>> [0] https://bugzilla.kernel.org/show_bug.cgi?id=195923
>>
>>
>> Best regards, / S pozdravom,
>>
>> Adrián Tomašov
>> Kernel Performance QE
>> atomasov@redhat.com
>
> I have added the i40e driver maintainer and the intel-wired-lan
> mailing list so that we can make are developers aware of the issue.
>
> Thanks.
>
> - Alex
Adam,
We are having some issues trying to reproduce what you reported.
Can you provide some additional data. Specifically we would be looking
for an "ethtool -i", and an "ethtool -S" for the port before and after
the test. If you can attach it to the bugzilla that would be
appreciated.
Thanks.
- Alex
^ permalink raw reply
* RE: [PATCH net-next] net: ndisc.c: reduce size of __ndisc_fill_addr_option()
From: YUAN Linyu @ 2017-05-31 1:00 UTC (permalink / raw)
To: David Ahern, Joe Perches, David Miller, cugyly@163.com
Cc: netdev@vger.kernel.org
In-Reply-To: <fe3573ad-90d1-6673-1e09-f6f1b47527bb@gmail.com>
Ok, I will send v2 later
> -----Original Message-----
> From: David Ahern [mailto:dsahern@gmail.com]
> Sent: Wednesday, May 31, 2017 8:40 AM
> To: YUAN Linyu; David Ahern; Joe Perches; David Miller; cugyly@163.com
> Cc: netdev@vger.kernel.org
> Subject: Re: [PATCH net-next] net: ndisc.c: reduce size of
> __ndisc_fill_addr_option()
>
> On 5/30/17 6:29 PM, YUAN Linyu wrote:
> >>> that function should be converted to skb_put_zero once it hits net-next.
> >> I will check it
> > I can't find skb_put_zero
>
> I believe the decision was to put it in Johannes' tree and it will make
> its way to DaveM's tree. Give some time.
^ permalink raw reply
* Re: [PATCH iproute2 0/4] ip: Add vrf show commmand
From: Stephen Hemminger @ 2017-05-31 0:56 UTC (permalink / raw)
To: David Ahern; +Cc: netdev
In-Reply-To: <20170527233450.58015-1-dsahern@gmail.com>
On Sat, 27 May 2017 17:34:46 -0600
David Ahern <dsahern@gmail.com> wrote:
> Refactor ip address to export its capability to save a list of nlmsg's
> for links and its link filter. Use both to add an 'ip vrf show' command
> to list all configured VRF with table id.
>
> David Ahern (4):
> ip address: Export ip_linkaddr_list
> ip address: Move filter struct to ip_common.h
> ip address: Change print_linkinfo_brief to take filter as an input
> ip vrf: Add show command
>
> include/libnetlink.h | 10 ++++
> ip/ip_common.h | 27 ++++++++-
> ip/ipaddress.c | 144 +++++++++++++++++++++++-------------------------
> ip/iplink.c | 2 +-
> ip/ipvrf.c | 153 +++++++++++++++++++++++++++++++++++++++++++++++++--
> man/man8/ip-vrf.8 | 11 ++++
> 6 files changed, 266 insertions(+), 81 deletions(-)
>
Looks good, series applied to master.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox