* Re: [PATCH v2 00/10] Constify attribute_group structures
From: Arvind Yadav @ 2017-07-26 6:36 UTC (permalink / raw)
To: Kalle Valo; +Cc: sgruszka, netdev, linux-kernel, linux-wireless
In-Reply-To: <87fudkiskz.fsf@codeaurora.org>
Hi Kalle,
On Tuesday 25 July 2017 06:25 PM, Kalle Valo wrote:
> Arvind Yadav <arvind.yadav.cs@gmail.com> writes:
>
>> attribute_groups are not supposed to change at runtime. So mark the
>> non-const structs as const.
>>
>> Arvind Yadav (10):
>> [PATCH v2 01/10] net: cdc_ncm: constify attribute_group structures.
>> [PATCH v2 02/10] net: can: at91_can: constify attribute_group structures.
>> [PATCH v2 03/10] net: can: janz-ican3: constify attribute_group structures.
>> [PATCH v2 04/10] wireless: ipw2200: constify attribute_group structures.
>> [PATCH v2 05/10] wireless: ipw2100: constify attribute_group structures.
>> [PATCH v2 06/10] wireless: iwlegacy: constify attribute_group structures.
>> [PATCH v2 07/10] wireless: iwlegacy: Constify attribute_group structures.
>> [PATCH v2 08/10] arcnet: com20020-pci: constify attribute_group structures.
>> [PATCH v2 09/10] net: bonding: constify attribute_group structures.
>> [PATCH v2 10/10] net: chelsio: cxgb3: constify attribute_group structures.
> Via which tree were you planning to push these? Is it ok if I take the
> wireless patches to my tree?
>
I have push these changes to linux-next branch. you can take this to
your branch.
~arvind
^ permalink raw reply
* Re: [PATCH v2 00/10] Constify attribute_group structures
From: Arvind Yadav @ 2017-07-26 6:35 UTC (permalink / raw)
To: Kalle Valo; +Cc: sgruszka, netdev, linux-kernel, linux-wireless
In-Reply-To: <87fudkiskz.fsf@codeaurora.org>
Hi Kalle,
On Tuesday 25 July 2017 06:25 PM, Kalle Valo wrote:
> Arvind Yadav <arvind.yadav.cs@gmail.com> writes:
>
>> attribute_groups are not supposed to change at runtime. So mark the
>> non-const structs as const.
>>
>> Arvind Yadav (10):
>> [PATCH v2 01/10] net: cdc_ncm: constify attribute_group structures.
>> [PATCH v2 02/10] net: can: at91_can: constify attribute_group structures.
>> [PATCH v2 03/10] net: can: janz-ican3: constify attribute_group structures.
>> [PATCH v2 04/10] wireless: ipw2200: constify attribute_group structures.
>> [PATCH v2 05/10] wireless: ipw2100: constify attribute_group structures.
>> [PATCH v2 06/10] wireless: iwlegacy: constify attribute_group structures.
>> [PATCH v2 07/10] wireless: iwlegacy: Constify attribute_group structures.
>> [PATCH v2 08/10] arcnet: com20020-pci: constify attribute_group structures.
>> [PATCH v2 09/10] net: bonding: constify attribute_group structures.
>> [PATCH v2 10/10] net: chelsio: cxgb3: constify attribute_group structures.
> Via which tree were you planning to push these? Is it ok if I take the
> wireless patches to my tree?
>
I have push these changes to linux-branch. you can take this to your branch.
~arvind
^ permalink raw reply
* [PATCH net] dccp: fix a memleak for dccp_feat_init err process
From: Xin Long @ 2017-07-26 6:20 UTC (permalink / raw)
To: network dev; +Cc: davem
In dccp_feat_init, when ccid_get_builtin_ccids failsto alloc
memory for rx.val, it should free tx.val before returning an
error.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
net/dccp/feat.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/dccp/feat.c b/net/dccp/feat.c
index 1704948..f227f00 100644
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -1471,9 +1471,12 @@ int dccp_feat_init(struct sock *sk)
* singleton values (which always leads to failure).
* These settings can still (later) be overridden via sockopts.
*/
- if (ccid_get_builtin_ccids(&tx.val, &tx.len) ||
- ccid_get_builtin_ccids(&rx.val, &rx.len))
+ if (ccid_get_builtin_ccids(&tx.val, &tx.len))
return -ENOBUFS;
+ if (ccid_get_builtin_ccids(&rx.val, &rx.len)) {
+ kfree(tx.val);
+ return -ENOBUFS;
+ }
if (!dccp_feat_prefer(sysctl_dccp_tx_ccid, tx.val, tx.len) ||
!dccp_feat_prefer(sysctl_dccp_rx_ccid, rx.val, rx.len))
--
2.1.0
^ permalink raw reply related
* [PATCH net] dccp: fix a memleak that dccp_ipv4 doesn't put reqsk properly
From: Xin Long @ 2017-07-26 6:19 UTC (permalink / raw)
To: network dev; +Cc: davem
The patch "dccp: fix a memleak that dccp_ipv6 doesn't put reqsk
properly" fixed reqsk refcnt leak for dccp_ipv6. The same issue
exists on dccp_ipv4.
This patch is to fix it for dccp_ipv4.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
net/dccp/ipv4.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index f85d901..1b202f1 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -631,6 +631,7 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
goto drop_and_free;
inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
+ reqsk_put(req);
return 0;
drop_and_free:
--
2.1.0
^ permalink raw reply related
* [PATCH net] dccp: fix a memleak that dccp_ipv6 doesn't put reqsk properly
From: Xin Long @ 2017-07-26 6:19 UTC (permalink / raw)
To: network dev; +Cc: davem
In dccp_v6_conn_request, after reqsk gets alloced and hashed into
ehash table, reqsk's refcnt is set 3. one is for req->rsk_timer,
one is for hlist, and the other one is for current using.
The problem is when dccp_v6_conn_request returns and finishes using
reqsk, it doesn't put reqsk. This will cause reqsk refcnt leaks and
reqsk obj never gets freed.
Jianlin found this issue when running dccp_memleak.c in a loop, the
system memory would run out.
dccp_memleak.c:
int s1 = socket(PF_INET6, 6, IPPROTO_IP);
bind(s1, &sa1, 0x20);
listen(s1, 0x9);
int s2 = socket(PF_INET6, 6, IPPROTO_IP);
connect(s2, &sa1, 0x20);
close(s1);
close(s2);
This patch is to put the reqsk before dccp_v6_conn_request returns,
just as what tcp_conn_request does.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
net/dccp/ipv6.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index c376af5..1b58eac 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -380,6 +380,7 @@ static int dccp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
goto drop_and_free;
inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
+ reqsk_put(req);
return 0;
drop_and_free:
--
2.1.0
^ permalink raw reply related
* [lkp-robot] [lib] e859afe1ee: kernel_BUG_at_lib/test_rhashtable.c
From: kernel test robot @ 2017-07-26 6:18 UTC (permalink / raw)
To: Phil Sutter
Cc: David S. Miller, Manuel Messner, Herbert Xu, LKML, netdev, lkp
[-- Attachment #1: Type: text/plain, Size: 4577 bytes --]
FYI, we noticed the following commit:
commit: e859afe1ee0c5ae981c55387ccd45eba258a7842 ("lib: test_rhashtable: fix for large entry counts")
https://git.kernel.org/cgit/linux/kernel/git/davem/net.git master
in testcase: boot
on test machine: qemu-system-x86_64 -enable-kvm -m 420M
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
+------------------------------------------+------------+------------+
| | 1d9b86de37 | e859afe1ee |
+------------------------------------------+------------+------------+
| boot_successes | 6 | 0 |
| boot_failures | 2 | 6 |
| BUG:kernel_hang_in_test_stage | 2 | |
| kernel_BUG_at_lib/test_rhashtable.c | 0 | 6 |
| invalid_opcode:#[##] | 0 | 6 |
| Kernel_panic-not_syncing:Fatal_exception | 0 | 6 |
+------------------------------------------+------------+------------+
[ 3.687816] kernel BUG at lib/test_rhashtable.c:230!
[ 3.687816] kernel BUG at lib/test_rhashtable.c:230!
[ 3.690340] invalid opcode: 0000 [#1]
[ 3.690340] invalid opcode: 0000 [#1]
[ 3.691685] CPU: 0 PID: 1 Comm: swapper Not tainted 4.13.0-rc1-00196-ge859afe #1
[ 3.691685] CPU: 0 PID: 1 Comm: swapper Not tainted 4.13.0-rc1-00196-ge859afe #1
[ 3.693655] task: ffff880018c3e040 task.stack: ffff880018c48000
[ 3.693655] task: ffff880018c3e040 task.stack: ffff880018c48000
[ 3.693655] RIP: 0010:test_rhashtable+0x7e0/0x10d7
[ 3.693655] RIP: 0010:test_rhashtable+0x7e0/0x10d7
[ 3.693655] RSP: 0000:ffff880018c4bdb8 EFLAGS: 00010202
[ 3.693655] RSP: 0000:ffff880018c4bdb8 EFLAGS: 00010202
[ 3.693655] RAX: 0000000000000206 RBX: 330af60b9f217ec1 RCX: 00000000000006a6
[ 3.693655] RAX: 0000000000000206 RBX: 330af60b9f217ec1 RCX: 00000000000006a6
[ 3.693655] RDX: 0000000000010000 RSI: 0000000000000001 RDI: 0000000000000206
[ 3.693655] RDX: 0000000000010000 RSI: 0000000000000001 RDI: 0000000000000206
[ 3.693655] RBP: ffff880018c4be40 R08: 00000000c5b6f33d R09: 0000000000000000
[ 3.693655] RBP: ffff880018c4be40 R08: 00000000c5b6f33d R09: 0000000000000000
[ 3.693655] R10: ffffffff92872260 R11: 0000000000000000 R12: 000000003001a345
[ 3.693655] R10: ffffffff92872260 R11: 0000000000000000 R12: 000000003001a345
[ 3.693655] R13: 0000000000000000 R14: 000000000000d1a2 R15: 0000000000000000
[ 3.693655] R13: 0000000000000000 R14: 000000000000d1a2 R15: 0000000000000000
[ 3.693655] FS: 0000000000000000(0000) GS:ffffffff92645000(0000) knlGS:0000000000000000
[ 3.693655] FS: 0000000000000000(0000) GS:ffffffff92645000(0000) knlGS:0000000000000000
[ 3.693655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.693655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.693655] CR2: 0000000000000000 CR3: 0000000007e17000 CR4: 00000000000006f0
[ 3.693655] CR2: 0000000000000000 CR3: 0000000007e17000 CR4: 00000000000006f0
[ 3.693655] Call Trace:
[ 3.693655] Call Trace:
[ 3.693655] test_rht_init+0x16f/0x746
[ 3.693655] test_rht_init+0x16f/0x746
[ 3.693655] ? test_rhashtable+0x10d7/0x10d7
[ 3.693655] ? test_rhashtable+0x10d7/0x10d7
[ 3.693655] do_one_initcall+0x111/0x2cf
[ 3.693655] do_one_initcall+0x111/0x2cf
[ 3.693655] kernel_init_freeable+0x248/0x3c2
[ 3.693655] kernel_init_freeable+0x248/0x3c2
[ 3.693655] ? rest_init+0x1d6/0x1d6
[ 3.693655] ? rest_init+0x1d6/0x1d6
[ 3.693655] kernel_init+0x10/0x18d
[ 3.693655] kernel_init+0x10/0x18d
[ 3.693655] ret_from_fork+0x2a/0x40
[ 3.693655] ret_from_fork+0x2a/0x40
[ 3.693655] Code: 48 c7 c7 60 22 87 92 ff 0d 2c db 66 ff 48 ff 05 cd c1 11 01 48 c1 cb 07 e8 18 2f 93 fd 48 83 7d b8 00 75 10 48 ff 05 be c1 11 01 <0f> 0b 48 ff 05 c5 c1 11 01 48 b8 81 f1 ab cd fa 08 0e 67 48 ff
[ 3.693655] Code: 48 c7 c7 60 22 87 92 ff 0d 2c db 66 ff 48 ff 05 cd c1 11 01 48 c1 cb 07 e8 18 2f 93 fd 48 83 7d b8 00 75 10 48 ff 05 be c1 11 01 <0f> 0b 48 ff 05 c5 c1 11 01 48 b8 81 f1 ab cd fa 08 0e 67 48 ff
[ 3.693655] RIP: test_rhashtable+0x7e0/0x10d7 RSP: ffff880018c4bdb8
[ 3.693655] RIP: test_rhashtable+0x7e0/0x10d7 RSP: ffff880018c4bdb8
[ 3.741828] ---[ end trace d459aa683f867d44 ]---
To reproduce:
git clone https://github.com/01org/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email
Thanks,
Xiaolong
[-- Attachment #2: config-4.13.0-rc1-00196-ge859afe --]
[-- Type: text/plain, Size: 107244 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.13.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU=y
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_RCU_NEED_SEGCBLIST is not set
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_SWAP is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_SOCK_CGROUP_DATA is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
CONFIG_GCC_PLUGIN_SANCOV=y
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK is not set
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
CONFIG_GCC_PLUGIN_RANDSTRUCT_PERFORMANCE=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_FAST_FEATURE_TESTS is not set
# CONFIG_X86_X2APIC is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_APB_TIMER=y
# CONFIG_DMI is not set
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_INJECT=y
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
# CONFIG_VM86 is not set
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_COMPACTION is not set
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
CONFIG_ZBUD=y
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
# CONFIG_KEXEC_VERIFY_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_RANDOMIZE_MEMORY is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR_CSTATE=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
CONFIG_DPTF_POWER=y
CONFIG_PMIC_OPREGION=y
# CONFIG_CRC_PMIC_OPREGION is not set
# CONFIG_XPOWER_PMIC_OPREGION is not set
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
#
# DesignWare PCI Core Support
#
#
# PCI host controller drivers
#
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
CONFIG_ISA_BUS=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_TSI57X is not set
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=y
CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_GRO_CELLS is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# Partition parsers
#
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
CONFIG_MTD_PHYSMAP_OF_GEMINI=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_INTEL_VR_NOR=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_MT81xx_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_SPI_INTEL_SPI=y
CONFIG_SPI_INTEL_SPI_PLATFORM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
CONFIG_BLK_DEV_RSXX=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
# CONFIG_NVME_TARGET_FCLOOP is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=y
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_93XX46=y
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=y
#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=y
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8172=y
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFSHCD_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=y
# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_SCSI_SNIC=y
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=y
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_MQ_DEFAULT=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_ERA=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=y
# CONFIG_ISCSI_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
# CONFIG_KEYBOARD_TWL4030 is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is not set
CONFIG_MOUSE_PS2_CYPRESS=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PSXPAD_SPI=y
# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_PEGASUS=y
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
# CONFIG_RMI4_F11 is not set
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_ASPEED_VUART=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_IFX6X60=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=y
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
# CONFIG_DEVPORT is not set
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_RK3X=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
# CONFIG_I2C_CROS_EC_TUNNEL is not set
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
CONFIG_SPI_DESIGNWARE=y
# CONFIG_SPI_DW_PCI is not set
# CONFIG_SPI_DW_MMIO is not set
CONFIG_SPI_DLN2=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_MERRIFIELD=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_BROXTON is not set
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_GEMINILAKE=y
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_XILINX=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=y
CONFIG_GPIO_104_IDIO_16=y
CONFIG_GPIO_104_IDI_48=y
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_GPIO_MM is not set
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WS16C48=y
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TPIC2810=y
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DLN2=y
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_LP3943=y
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MSIC=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8994=y
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_MERRIFIELD=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_RDC321X=y
CONFIG_GPIO_SODAVILLE=y
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
# CONFIG_GPIO_XRA1403 is not set
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2405=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_AVS=y
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_DA9150=y
CONFIG_AXP288_CHARGER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LTC3651=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_CHARGER_TPS65217 is not set
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX6639=y
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_EMULATION=y
CONFIG_QORIQ_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_INTEL_POWERCLAMP=y
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
CONFIG_INTEL_PCH_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_INTEL_SOC_PMIC_BXTWC is not set
CONFIG_INTEL_SOC_PMIC_CHTWC=y
CONFIG_MFD_INTEL_LPSS=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_INTEL_MSIC=y
CONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_EZX_PCAP=y
# CONFIG_MFD_CPCAP is not set
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RTSX_USB is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_ACT8945A is not set
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_AS3722 is not set
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9062=y
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PV88060 is not set
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RT5033=y
# CONFIG_REGULATOR_SKY81452 is not set
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FWNODE=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=y
# CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV is not set
# CONFIG_USB_GSPCA is not set
CONFIG_USB_PWC=y
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=y
CONFIG_USB_ZR364XX=y
CONFIG_USB_STKWEBCAM=y
CONFIG_USB_S2255=y
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=y
# CONFIG_VIDEO_PVRUSB2_SYSFS is not set
CONFIG_VIDEO_HDPVR=y
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y
#
# Analog/digital TV USB devices
#
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
#
# USB HDMI CEC adapters
#
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_TW5864=y
# CONFIG_VIDEO_TW68 is not set
CONFIG_VIDEO_ZORAN=y
# CONFIG_VIDEO_ZORAN_DC30 is not set
# CONFIG_VIDEO_ZORAN_ZR36060 is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_HEXIUM_GEMINI=y
# CONFIG_VIDEO_HEXIUM_ORION is not set
CONFIG_VIDEO_MXB=y
# CONFIG_VIDEO_DT3155 is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_SAA7134=y
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
CONFIG_VIDEO_SH_VEU=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=y
# CONFIG_VIDEO_VIVID_CEC is not set
CONFIG_VIDEO_VIVID_MAX_DEVS=64
# CONFIG_VIDEO_VIM2M is not set
CONFIG_CEC_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
#
# Supported MMC/SDIO adapters
#
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_VIDEO_V4L2_TPG=y
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_WM8775=y
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TVP5150=y
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=y
#
# Video encoders
#
#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_MT9V011=y
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
#
# SDR tuner chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_LIB_RANDOM is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
# CONFIG_FB_UDL is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
# CONFIG_FB_AUO_K1900 is not set
CONFIG_FB_AUO_K1901=y
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_LCD_S6E63M0=y
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
CONFIG_BACKLIGHT_PANDORA=y
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_TPS65217=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_VGASTATE=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MAYFLASH=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTI=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=y
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=y
#
# USB HID support
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_FOTG210_HCD=y
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_OF=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_ULPI is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
# CONFIG_USB_ISP1760_DUAL_ROLE is not set
#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=y
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
# CONFIG_USB_SERIAL_QT2 is not set
CONFIG_USB_SERIAL_UPD78F0730=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=y
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
# CONFIG_USB_M66592 is not set
CONFIG_USB_BDC_UDC=y
#
# Platform Support
#
CONFIG_USB_BDC_PCI=y
# CONFIG_USB_AMD5536UDC is not set
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
# CONFIG_USB_NET2280 is not set
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=y
# CONFIG_USB_GADGET_XILINX is not set
CONFIG_USB_DUMMY_HCD=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
CONFIG_USB_CONFIGFS_F_FS=y
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_UVC is not set
CONFIG_USB_CONFIGFS_F_PRINTER=y
# CONFIG_USB_CONFIGFS_F_TCM is not set
#
# USB Power Delivery and Type-C drivers
#
CONFIG_TYPEC=y
# CONFIG_TYPEC_UCSI is not set
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_TOSHIBA_PCI=y
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_FSL_EDMA is not set
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IOATDMA=y
CONFIG_INTEL_MIC_X100_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
CONFIG_CHARLCD=y
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_HYPERV_TSCPAGE is not set
CONFIG_STAGING=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=y
# CONFIG_COMEDI_PARPORT is not set
CONFIG_COMEDI_SERIAL2002=y
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_PCI_DRIVERS is not set
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
# CONFIG_COMEDI_NI_USB6501 is not set
# CONFIG_COMEDI_USBDUX is not set
# CONFIG_COMEDI_USBDUXFAST is not set
CONFIG_COMEDI_USBDUXSIGMA=y
CONFIG_COMEDI_VMK80XX=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
# CONFIG_RTS5208 is not set
CONFIG_FB_SM750=y
CONFIG_FB_XGI=y
#
# Speakup console speech
#
CONFIG_STAGING_MEDIA=y
#
# Android
#
# CONFIG_ION is not set
# CONFIG_STAGING_BOARD is not set
CONFIG_DGNC=y
CONFIG_GS_FPGABOOT=y
CONFIG_CRYPTO_SKEIN=y
# CONFIG_UNISYSSPAR is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
# CONFIG_FB_TFT_BD663474 is not set
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
# CONFIG_FB_TFT_HX8353D is not set
# CONFIG_FB_TFT_HX8357D is not set
CONFIG_FB_TFT_ILI9163=y
CONFIG_FB_TFT_ILI9320=y
CONFIG_FB_TFT_ILI9325=y
CONFIG_FB_TFT_ILI9340=y
# CONFIG_FB_TFT_ILI9341 is not set
CONFIG_FB_TFT_ILI9481=y
CONFIG_FB_TFT_ILI9486=y
CONFIG_FB_TFT_PCD8544=y
# CONFIG_FB_TFT_RA8875 is not set
CONFIG_FB_TFT_S6D02A1=y
CONFIG_FB_TFT_S6D1121=y
# CONFIG_FB_TFT_SH1106 is not set
CONFIG_FB_TFT_SSD1289=y
CONFIG_FB_TFT_SSD1305=y
CONFIG_FB_TFT_SSD1306=y
# CONFIG_FB_TFT_SSD1325 is not set
CONFIG_FB_TFT_SSD1331=y
CONFIG_FB_TFT_SSD1351=y
CONFIG_FB_TFT_ST7735R=y
CONFIG_FB_TFT_ST7789V=y
CONFIG_FB_TFT_TINYLCD=y
CONFIG_FB_TFT_TLS8204=y
CONFIG_FB_TFT_UC1611=y
CONFIG_FB_TFT_UC1701=y
CONFIG_FB_TFT_UPD161704=y
# CONFIG_FB_TFT_WATTEROTT is not set
CONFIG_FB_FLEX=y
CONFIG_FB_TFT_FBTFT_DEVICE=y
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
CONFIG_GREYBUS=y
# CONFIG_GREYBUS_ES2 is not set
CONFIG_GREYBUS_BOOTROM=y
CONFIG_GREYBUS_FIRMWARE=y
CONFIG_GREYBUS_HID=y
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
# CONFIG_GREYBUS_POWER is not set
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
# CONFIG_GREYBUS_BRIDGED_PHY is not set
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CCREE_FIPS_SUPPORT=y
#
# USB Power Delivery and Type-C drivers
#
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_FUSB302=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
CONFIG_ALIENWARE_WMI=y
CONFIG_ASUS_LAPTOP=y
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_WMI_LED=y
CONFIG_DELL_SMO8800=y
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_TABLET=y
CONFIG_HP_ACCEL=y
CONFIG_HP_WIRELESS=y
CONFIG_HP_WMI=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ASUS_WMI is not set
CONFIG_ASUS_WIRELESS=y
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
# CONFIG_MSI_WMI is not set
CONFIG_PEAQ_WMI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_CHT_INT33FE=y
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_SCU_IPC=y
# CONFIG_INTEL_SCU_IPC_UTIL is not set
CONFIG_INTEL_MID_POWER_BUTTON=y
CONFIG_INTEL_MFLD_THERMAL=y
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_MXM_WMI is not set
# CONFIG_SAMSUNG_Q10 is not set
CONFIG_APPLE_GMUX=y
# CONFIG_INTEL_RST is not set
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_PVPANIC=y
CONFIG_INTEL_PMC_IPC=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_SURFACE_3_BUTTON=y
CONFIG_INTEL_PUNIT_IPC=y
# CONFIG_INTEL_TELEMETRY is not set
CONFIG_MLX_PLATFORM=y
CONFIG_MLX_CPLD_PLATFORM=y
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=y
CONFIG_CROS_EC_CHARDEV=y
CONFIG_CROS_EC_LPC=y
# CONFIG_CROS_EC_LPC_MEC is not set
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
# CONFIG_COMMON_CLK_SI514 is not set
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
CONFIG_COMMON_CLK_VC5=y
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
# CONFIG_PCC is not set
# CONFIG_ALTERA_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_AXP288=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_INTEL_INT3496=y
# CONFIG_EXTCON_INTEL_CHT_WC is not set
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_PALMAS=y
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=y
CONFIG_NTB_AMD=y
CONFIG_NTB_IDT=y
CONFIG_NTB_INTEL=y
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
# CONFIG_VME_TSI148 is not set
# CONFIG_VME_FAKE is not set
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_VME_PIO2=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
# CONFIG_PWM_CRC is not set
# CONFIG_PWM_CROS_EC is not set
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_LP3943 is not set
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_GEMINI is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_QCOM_USB_HS=y
# CONFIG_PHY_QCOM_USB_HSIC is not set
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
# CONFIG_PHY_TUSB1210 is not set
# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder"
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_BLK=y
# CONFIG_BTT is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_STM=y
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
# CONFIG_INTEL_TH is not set
#
# FPGA Configuration Support
#
CONFIG_FPGA=y
CONFIG_FPGA_MGR_ICE40_SPI=y
CONFIG_FPGA_MGR_XILINX_SPI=y
# CONFIG_FPGA_BRIDGE is not set
CONFIG_ALTERA_PR_IP_CORE=y
# CONFIG_ALTERA_PR_IP_CORE_PLAT is not set
#
# FSI support
#
CONFIG_FSI=y
# CONFIG_FSI_MASTER_GPIO is not set
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_SCOM=y
CONFIG_MULTIPLEXER=y
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
# CONFIG_GOOGLE_FIRMWARE is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT2 is not set
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FS_ENCRYPTION=y
CONFIG_F2FS_FAULT_INJECTION=y
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_INDEX is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
# CONFIG_JFFS2_FS_POSIX_ACL is not set
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
# CONFIG_JFFS2_RTIME is not set
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
# CONFIG_UBIFS_FS_ENCRYPTION is not set
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_POISONING_NO_SANITY=y
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_KCOV=y
# CONFIG_KCOV_INSTRUMENT_ALL is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_WQ_WATCHDOG=y
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAIL_FUTEX=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_RHASHTABLE=y
# CONFIG_TEST_HASH is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_UDELAY=y
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN_NULL is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
CONFIG_CRYPTO_SHA256_MB=y
CONFIG_CRYPTO_SHA512_MB=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DES3_EDE_X86_64=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=y
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y
[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 3888 bytes --]
#!/bin/sh
export_top_env()
{
export suite='boot'
export testcase='boot'
export timeout='10m'
export job_origin='/lkp/lkp/src/jobs/boot.yaml'
export queue='bisect'
export testbox='vm-lkp-st01-openwrt-ia32-16'
export tbox_group='vm-lkp-st01-openwrt-ia32'
export branch='linux-next/master'
export commit='e859afe1ee0c5ae981c55387ccd45eba258a7842'
export kconfig='x86_64-randconfig-u0-07251653'
export submit_id='597759f40b9a93a697a63a16'
export job_file='/lkp/scheduled/vm-lkp-st01-openwrt-ia32-16/boot-1-openwrt-i386-2016-03-16.cgz-e859afe1ee0c5ae981c55387ccd45eba258a7842-20170725-42647-2p73vl-0.yaml'
export id='f97f42066a5e55b4ad19a5f64dbff0d8d9c72c11'
export model='qemu-system-x86_64 -enable-kvm'
export nr_vm=16
export nr_cpu=1
export memory='420M'
export rootfs='openwrt-i386-2016-03-16.cgz'
export need_kconfig='CONFIG_KVM_GUEST=y'
export compiler='gcc-6'
export enqueue_time='2017-07-25 22:47:16 +0800'
export _id='597759f40b9a93a697a63a16'
export _rt='/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-randconfig-u0-07251653/gcc-6/e859afe1ee0c5ae981c55387ccd45eba258a7842'
export user='lkp'
export result_root='/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-randconfig-u0-07251653/gcc-6/e859afe1ee0c5ae981c55387ccd45eba258a7842/0'
export LKP_SERVER='inn'
export max_uptime=600
export initrd='/osimage/openwrt/openwrt-i386-2016-03-16.cgz'
export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-16/boot-1-openwrt-i386-2016-03-16.cgz-e859afe1ee0c5ae981c55387ccd45eba258a7842-20170725-42647-2p73vl-0.yaml
ARCH=x86_64
kconfig=x86_64-randconfig-u0-07251653
branch=linux-next/master
commit=e859afe1ee0c5ae981c55387ccd45eba258a7842
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-u0-07251653/gcc-6/e859afe1ee0c5ae981c55387ccd45eba258a7842/vmlinuz-4.13.0-rc1-00196-ge859afe
max_uptime=600
RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-randconfig-u0-07251653/gcc-6/e859afe1ee0c5ae981c55387ccd45eba258a7842/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
rw'
export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export kernel='/pkg/linux/x86_64-randconfig-u0-07251653/gcc-6/e859afe1ee0c5ae981c55387ccd45eba258a7842/vmlinuz-4.13.0-rc1-00196-ge859afe'
export dequeue_time='2017-07-25 23:02:09 +0800'
export job_initrd='/lkp/scheduled/vm-lkp-st01-openwrt-ia32-16/boot-1-openwrt-i386-2016-03-16.cgz-e859afe1ee0c5ae981c55387ccd45eba258a7842-20170725-42647-2p73vl-0.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test $LKP_SRC/tests/wrapper sleep 1
}
extract_stats()
{
$LKP_SRC/stats/wrapper boot-slabinfo
$LKP_SRC/stats/wrapper boot-meminfo
$LKP_SRC/stats/wrapper memmap
$LKP_SRC/stats/wrapper boot-memory
$LKP_SRC/stats/wrapper boot-time
$LKP_SRC/stats/wrapper kernel-size
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper time sleep.time
$LKP_SRC/stats/wrapper time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper last_state
}
"$@"
[-- Attachment #4: dmesg.xz --]
[-- Type: application/octet-stream, Size: 8480 bytes --]
^ permalink raw reply
* Re: [PATCH 0/8] net: mvpp2: add TX interrupts support
From: Marcin Wojtas @ 2017-07-26 6:18 UTC (permalink / raw)
To: Thomas Petazzoni
Cc: netdev, David S. Miller, Russell King, Antoine Tenart,
Miquèl Raynal, linux-arm-kernel@lists.infradead.org,
Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement,
Nadav Haklai, Hanna Hawa, Yehuda Yitschak, Stefan Chulski
In-Reply-To: <20170725155509.10574-1-thomas.petazzoni@free-electrons.com>
Hi Thomas,
I tested patchset on A8040-DB, everything seems fine.
Best regards,
Marcin
2017-07-25 17:55 GMT+02:00 Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>:
> Hello,
>
> So far, the mvpp2 driver was using an hrtimer to handle TX
> completion. This patch series adds support for using TX interrupts
> (for each CPU) on PPv2.2, the variant of the IP used on Marvell Armada
> 7K/8K.
>
> This series has been tested on Marvell Armada 7K (PPv2.2) and Armada
> 375 (PPv2.1).
>
> Dave:
>
> - This series depends on the previous series sent by Antoine Ténart
> "net: mvpp2: MAC/GoP configuration and optional PHYs". Functionally
> speaking there is no real dependency, but we touch in a few areas
> the same piece of code, so I based my patch series on top of
> Antoine's.
>
> - Please do not apply the last patch of this series "arm64: dts:
> marvell: add TX interrupts for PPv2.2", it will be taken by the ARM
> mvebu maintainers.
>
> Thanks!
>
> Thomas
>
> Thomas Petazzoni (8):
> net: mvpp2: fix MVPP21_ISR_RXQ_GROUP_REG definition
> net: mvpp2: remove RX queue group reset code
> net: mvpp2: introduce per-port nrxqs/ntxqs variables
> net: mvpp2: move from cpu-centric naming to "software thread" naming
> net: mvpp2: introduce queue_vector concept
> net: mvpp2: add support for TX interrupts and RX queue distribution
> modes
> dt-bindings: net: marvell-pp2: update interrupt-names with TX
> interrupts
> arm64: dts: marvell: add TX interrupts for PPv2.2
>
> .../devicetree/bindings/net/marvell-pp2.txt | 33 +-
> .../boot/dts/marvell/armada-cp110-master.dtsi | 21 +-
> .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 21 +-
> drivers/net/ethernet/marvell/mvpp2.c | 638 +++++++++++++++------
> 4 files changed, 534 insertions(+), 179 deletions(-)
>
> --
> 2.9.4
>
^ permalink raw reply
* Re: [RFC] switchdev: clarify ndo_get_phys_port_name() formats
From: Jiri Pirko @ 2017-07-26 5:48 UTC (permalink / raw)
To: Jakub Kicinski
Cc: netdev, Jiri Pirko, Or Gerlitz, Michael Chan, Sathya Perla,
simon.horman, davem
In-Reply-To: <20170725051344.2040-1-jakub.kicinski@netronome.com>
Tue, Jul 25, 2017 at 07:13:44AM CEST, jakub.kicinski@netronome.com wrote:
>We are still in position where we can suggest uniform naming
>convention for ndo_get_phys_port_name(). switchdev.txt file
>already contained a suggestion of how to name external ports.
>Since the use of switchdev for SR-IOV NIC's eswitches is growing,
>establish a format for ports of those devices as well.
>
>Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
>---
> Documentation/networking/switchdev.txt | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
>
>diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
>index 3e7b946dea27..7c4b6025fb4b 100644
>--- a/Documentation/networking/switchdev.txt
>+++ b/Documentation/networking/switchdev.txt
>@@ -119,9 +119,17 @@ into 4 10G ports, resulting in 4 port netdevs, the device can give a unique
> SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \
> ATTR{phys_port_name}!="", NAME="swX$attr{phys_port_name}"
>
>-Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y
>-is the port name or ID, and Z is the sub-port name or ID. For example, sw1p1s0
>-would be sub-port 0 on port 1 on switch 1.
>+Suggested formats of the port name returned by ndo_get_phys_port_name are:
>+ - pA for external ports;
>+ - pAsB for split external ports;
>+ - pfC for PF ports (so called PF representors);
>+ - pfCvfD for VF ports (so called VF representors).
I think it would make sense if the driver would just fill-up a struct in
the ndo call and core would generate the string.
>+Where A is the port name or ID; B is the sub-port name or ID; C is PCIe
>+Physical Function name or ID and D is PCIe Virtual Function name or ID.
>+
>+Suggested naming convention for switches is "swX", where X is the switch name
>+or ID, plus the port name. For example, sw1p1s0 would be sub-port 0 on port 1
>+on switch 1.
>
> Port Features
> ^^^^^^^^^^^^^
>--
>2.11.0
>
^ permalink raw reply
* Re: [PATCH v2 1/3] ptp: introduce ptp auxiliary worker
From: Richard Cochran @ 2017-07-26 4:30 UTC (permalink / raw)
To: Grygorii Strashko
Cc: David S. Miller, netdev, Sekhar Nori, linux-kernel, linux-omap,
Wingman Kwok, Ivan Khoronzhuk
In-Reply-To: <20170726042439.b2ulx4zx4iyhirxh@localhost.localdomain>
On Wed, Jul 26, 2017 at 06:24:39AM +0200, Richard Cochran wrote:
> Thanks for coding this up. I'd like to get some broader review. On
> the next round, please include lkml, John Stultz, and Thomas Gleixner.
I just noticed that you already have lkml.
Thanks,
Richard
^ permalink raw reply
* Re: [PATCH v3] net: ethernet: nb8800: Handle all 4 RGMII modes identically
From: David Miller @ 2017-07-26 4:27 UTC (permalink / raw)
To: marc_gonzalez; +Cc: andrew, f.fainelli, mans, netdev, slash.tmp
In-Reply-To: <40478d08-8612-b3ab-63eb-24d12da0423f@sigmadesigns.com>
From: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Date: Tue, 25 Jul 2017 14:35:03 +0200
> Before commit bf8f6952a233 ("Add blurb about RGMII") it was unclear
> whose responsibility it was to insert the required clock skew, and
> in hindsight, some PHY drivers got it wrong. The solution forward
> is to introduce a new property, explicitly requiring skew from the
> node to which it is attached. In the interim, this driver will handle
> all 4 RGMII modes identically (no skew).
>
> Fixes: 52dfc8301248 ("net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller")
> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Applied and queued up for -stable, thanks!
^ permalink raw reply
* Re: [PATCH net 1/1] Revert "netvsc: optimize calculation of number of slots"
From: David Miller @ 2017-07-26 4:27 UTC (permalink / raw)
To: stephen; +Cc: kys, haiyangz, sthemmin, devel, netdev
In-Reply-To: <20170725040319.5969-2-sthemmin@microsoft.com>
From: Stephen Hemminger <stephen@networkplumber.org>
Date: Mon, 24 Jul 2017 21:03:19 -0700
> The logic for computing page buffer scatter does not take into
> account the impact of compound pages. Therefore the optimization
> to compute number of slots was incorrect and could cause stack
> corruption a skb was sent with lots of fragments from huge pages.
>
> This reverts commit 60b86665af0dfbeebda8aae43f0ba451cd2dcfe5.
>
> Fixes: 60b86665af0d ("netvsc: optimize calculation of number of slots")
> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Applied.
^ permalink raw reply
* Re: [PATCH v2 1/3] ptp: introduce ptp auxiliary worker
From: Richard Cochran @ 2017-07-26 4:24 UTC (permalink / raw)
To: Grygorii Strashko
Cc: David S. Miller, netdev, Sekhar Nori, linux-kernel, linux-omap,
Wingman Kwok, Ivan Khoronzhuk
In-Reply-To: <20170725202420.28229-2-grygorii.strashko@ti.com>
Thanks for coding this up. I'd like to get some broader review. On
the next round, please include lkml, John Stultz, and Thomas Gleixner.
On Tue, Jul 25, 2017 at 03:24:18PM -0500, Grygorii Strashko wrote:
> @@ -217,6 +231,19 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
> mutex_init(&ptp->pincfg_mux);
> init_waitqueue_head(&ptp->tsev_wq);
>
> + if (ptp->info->do_aux_work) {
> + char *worker_name = kasprintf(GFP_KERNEL, "ptp%d", ptp->index);
> +
> + kthread_init_delayed_work(&ptp->aux_work, ptp_aux_kworker);
> + ptp->kworker = kthread_create_worker(0, worker_name ?
> + worker_name : info->name);
> + if (IS_ERR(ptp->kworker)) {
> + pr_err("failed to create ptp aux_worker task %ld\n",
> + PTR_ERR(ptp->kworker));
> + return ERR_CAST(ptp->kworker);
In case of error, we should undo the allocations.
> + }
> + }
> +
> err = ptp_populate_pin_groups(ptp);
> if (err)
> goto no_pin_groups;
> @@ -339,6 +371,14 @@ int ptp_find_pin(struct ptp_clock *ptp,
> }
> EXPORT_SYMBOL(ptp_find_pin);
>
> +int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay)
> +{
> + if (!ptp->kworker)
> + return -EOPNOTSUPP;
We don't need error checking here. Surely the driver knows whether to
call this function or not.
> + return kthread_mod_delayed_work(ptp->kworker, &ptp->aux_work, delay);
> +}
> +EXPORT_SYMBOL(ptp_schedule_worker);
> +
> /* module operations */
>
> static void __exit ptp_exit(void)
> diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
> index a026bfd..ec86fd2 100644
> --- a/include/linux/ptp_clock_kernel.h
> +++ b/include/linux/ptp_clock_kernel.h
> @@ -98,6 +98,10 @@ struct system_device_crosststamp;
> * parameter pin: index of the pin in question.
> * parameter func: the desired function to use.
> * parameter chan: the function channel index to use.
Blank comment line here please.
> + * @do_work: Request driver to perform auxiliary (periodic) operations
> + * Driver should return delay of the next auxiliary work scheduling
> + * time (>=0) or negative value in case further scheduling
> + * is not required.
> *
Thanks,
Richard
^ permalink raw reply
* Re: [PATCH net-next] virtio-net: mark PM functions as __maybe_unused
From: David Miller @ 2017-07-26 4:23 UTC (permalink / raw)
To: arnd
Cc: mst, jasowang, john.fastabend, willemb, bigeasy, edumazet,
virtualization, netdev, linux-kernel
In-Reply-To: <20170725153600.211694-1-arnd@arndb.de>
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 25 Jul 2017 17:35:50 +0200
> After removing the reset function, the freeze and restore functions
> are now unused when CONFIG_PM_SLEEP is disabled:
>
> drivers/net/virtio_net.c:1881:12: error: 'virtnet_restore_up' defined but not used [-Werror=unused-function]
> static int virtnet_restore_up(struct virtio_device *vdev)
> drivers/net/virtio_net.c:1859:13: error: 'virtnet_freeze_down' defined but not used [-Werror=unused-function]
> static void virtnet_freeze_down(struct virtio_device *vdev)
>
> A more robust way to do this is to remove the #ifdef around the callers
> and instead mark them as __maybe_unused. The compiler will now just
> silently drop the unused code.
>
> Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH] ftgmac100: return error in ftgmac100_alloc_rx_buf
From: David Miller @ 2017-07-26 4:22 UTC (permalink / raw)
To: joel; +Cc: benh, netdev
In-Reply-To: <20170725004901.13406-1-joel@jms.id.au>
From: Joel Stanley <joel@jms.id.au>
Date: Tue, 25 Jul 2017 10:19:01 +0930
> The error paths set err, but it's not returned.
>
> I wondered if we should fix all of the callers to check the returned
> value, but Ben explains why the code is this way:
>
>> Most call sites ignore it on purpose. There's nothing we can do if
>> we fail to get a buffer at interrupt time, so we point the buffer to
>> the scratch page so the HW doesn't DMA into lalaland and lose the
>> packet.
>>
>> The one call site that tests and can fail is the one used when brining
>> the interface up. If we fail to allocate at that point, we fail the
>> ifup. But as you noticed, I do have a bug not returning the error.
>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH v2 net-next 2/2] liquidio: cleanup: removed cryptic and misleading macro
From: David Miller @ 2017-07-26 4:20 UTC (permalink / raw)
To: felix.manlunas
Cc: netdev, raghu.vatsavayi, derek.chickles, satananda.burla,
ricardo.farrington
In-Reply-To: <20170725001727.GA1170@felix-thinkpad.cavium.com>
From: Felix Manlunas <felix.manlunas@cavium.com>
Date: Mon, 24 Jul 2017 17:17:27 -0700
> From: Rick Farrington <ricardo.farrington@cavium.com>
>
> Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
> ---
> drivers/net/ethernet/cavium/liquidio/octeon_console.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_console.c b/drivers/net/ethernet/cavium/liquidio/octeon_console.c
> index 501ad95..0770183 100644
> --- a/drivers/net/ethernet/cavium/liquidio/octeon_console.c
> +++ b/drivers/net/ethernet/cavium/liquidio/octeon_console.c
> @@ -42,8 +42,6 @@ module_param(console_bitmask, int, 0644);
> MODULE_PARM_DESC(console_bitmask,
> "Bitmask indicating which consoles have debug output redirected to syslog.");
>
> -#define CAST_ULL(v) ((u64)(v))
> -
> #define BOOTLOADER_PCI_READ_BUFFER_DATA_ADDR 0x0006c008
> #define BOOTLOADER_PCI_READ_BUFFER_LEN_ADDR 0x0006c004
> #define BOOTLOADER_PCI_READ_BUFFER_OWNER_ADDR 0x0006c000
> @@ -233,7 +231,7 @@ static int __cvmx_bootmem_check_version(struct octeon_device *oct,
> (exact_match && major_version != exact_match)) {
> dev_err(&oct->pci_dev->dev, "bootmem ver mismatch %d.%d addr:0x%llx\n",
> major_version, minor_version,
> - CAST_ULL(oct->bootmem_desc_addr));
> + (long long)(oct->bootmem_desc_addr));
Too many parenthesis.
When oct->bootmem_desc_addr was the argument to a macro/function, yes
the parenthesis were necessary. But now they should be removed.
^ permalink raw reply
* Re: [PATCH net-next] virtio-net: mark PM functions as __maybe_unused
From: Jason Wang @ 2017-07-26 3:21 UTC (permalink / raw)
To: Arnd Bergmann, Michael S. Tsirkin
Cc: Willem de Bruijn, netdev, Sebastian Andrzej Siewior,
John Fastabend, linux-kernel, virtualization, Eric Dumazet,
David S. Miller
In-Reply-To: <20170725153600.211694-1-arnd@arndb.de>
On 2017年07月25日 23:35, Arnd Bergmann wrote:
> After removing the reset function, the freeze and restore functions
> are now unused when CONFIG_PM_SLEEP is disabled:
>
> drivers/net/virtio_net.c:1881:12: error: 'virtnet_restore_up' defined but not used [-Werror=unused-function]
> static int virtnet_restore_up(struct virtio_device *vdev)
> drivers/net/virtio_net.c:1859:13: error: 'virtnet_freeze_down' defined but not used [-Werror=unused-function]
> static void virtnet_freeze_down(struct virtio_device *vdev)
>
> A more robust way to do this is to remove the #ifdef around the callers
> and instead mark them as __maybe_unused. The compiler will now just
> silently drop the unused code.
>
> Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/net/virtio_net.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index d4751ce23b4f..1902701e15a9 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -2702,8 +2702,7 @@ static void virtnet_remove(struct virtio_device *vdev)
> free_netdev(vi->dev);
> }
>
> -#ifdef CONFIG_PM_SLEEP
> -static int virtnet_freeze(struct virtio_device *vdev)
> +static __maybe_unused int virtnet_freeze(struct virtio_device *vdev)
> {
> struct virtnet_info *vi = vdev->priv;
>
> @@ -2714,7 +2713,7 @@ static int virtnet_freeze(struct virtio_device *vdev)
> return 0;
> }
>
> -static int virtnet_restore(struct virtio_device *vdev)
> +static __maybe_unused int virtnet_restore(struct virtio_device *vdev)
> {
> struct virtnet_info *vi = vdev->priv;
> int err;
> @@ -2730,7 +2729,6 @@ static int virtnet_restore(struct virtio_device *vdev)
>
> return 0;
> }
> -#endif
>
> static struct virtio_device_id id_table[] = {
> { VIRTIO_ID_NET, VIRTIO_DEV_ANY_ID },
Acked-by: Jason Wang <jasowang@redhat.com>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply
* Re: [PATCH net-next V2 5/5] virtio-net: switch off offloads on demand if possible on XDP set
From: Jason Wang @ 2017-07-26 3:19 UTC (permalink / raw)
To: Michael S. Tsirkin; +Cc: virtualization, netdev, linux-kernel
In-Reply-To: <20170725002700-mutt-send-email-mst@kernel.org>
On 2017年07月25日 05:29, Michael S. Tsirkin wrote:
> On Wed, Jul 19, 2017 at 04:54:49PM +0800, Jason Wang wrote:
>> Current XDP implementation wants guest offloads feature to be disabled
>> on device. This is inconvenient and means guest can't benefit from
>> offloads if XDP is not used. This patch tries to address this
>> limitation by disabling the offloads on demand through control guest
>> offloads. Guest offloads will be disabled and enabled on demand on XDP
>> set.
>>
>> Signed-off-by: Jason Wang <jasowang@redhat.com>
> Doesn't look like my comments on v1 were addressed.
> Copying here:
>
> In fact, since we no longer reset when XDP is set,
> here device might have offloads enabled, buffers are
> used but not consumed, then XDP is set.
>
> This can result in
> - packet scattered across multiple buffers
> (handled correctly but need to update the comment)
We drop all gso packet now, so this won't happen.
> - packet may have VIRTIO_NET_HDR_F_NEEDS_CSUM, in that case
> the spec says "The checksum on the packet is incomplete".
> (probably needs to be handled by calculating the checksum).
This needs to be fixed, but it was not introduced by this commit but:
b00f70b0dacb virtio-net: unbreak csumed packets for XDP_PASS which
allows NEEDS_CSUM for mergeable buffer
bb91accf2733 virtio-net: XDP support for small buffers which forbid
checksumed packet for small buffer
Will post a patch to checksum the packet.
Thanks
>
> Jason, as David applied this patch already, can you comment
> on the issues please?
>
>> ---
>> drivers/net/virtio_net.c | 70 ++++++++++++++++++++++++++++++++++++++++++++----
>> 1 file changed, 65 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
>> index b3fc01d..5fbd15e 100644
>> --- a/drivers/net/virtio_net.c
>> +++ b/drivers/net/virtio_net.c
>> @@ -57,6 +57,11 @@ DECLARE_EWMA(pkt_len, 0, 64)
>>
>> #define VIRTNET_DRIVER_VERSION "1.0.0"
>>
>> +const unsigned long guest_offloads[] = { VIRTIO_NET_F_GUEST_TSO4,
>> + VIRTIO_NET_F_GUEST_TSO6,
>> + VIRTIO_NET_F_GUEST_ECN,
>> + VIRTIO_NET_F_GUEST_UFO };
>> +
>> struct virtnet_stats {
>> struct u64_stats_sync tx_syncp;
>> struct u64_stats_sync rx_syncp;
>> @@ -164,10 +169,13 @@ struct virtnet_info {
>> u8 ctrl_promisc;
>> u8 ctrl_allmulti;
>> u16 ctrl_vid;
>> + u64 ctrl_offloads;
>>
>> /* Ethtool settings */
>> u8 duplex;
>> u32 speed;
>> +
>> + unsigned long guest_offloads;
>> };
>>
>> struct padded_vnet_hdr {
>> @@ -1896,6 +1904,47 @@ static int virtnet_restore_up(struct virtio_device *vdev)
>> return err;
>> }
>>
>> +static int virtnet_set_guest_offloads(struct virtnet_info *vi, u64 offloads)
>> +{
>> + struct scatterlist sg;
>> + vi->ctrl_offloads = cpu_to_virtio64(vi->vdev, offloads);
>> +
>> + sg_init_one(&sg, &vi->ctrl_offloads, sizeof(vi->ctrl_offloads));
>> +
>> + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_GUEST_OFFLOADS,
>> + VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET, &sg)) {
>> + dev_warn(&vi->dev->dev, "Fail to set guest offload. \n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int virtnet_clear_guest_offloads(struct virtnet_info *vi)
>> +{
>> + u64 offloads = 0;
>> +
>> + if (!vi->guest_offloads)
>> + return 0;
>> +
>> + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))
>> + offloads = 1ULL << VIRTIO_NET_F_GUEST_CSUM;
>> +
>> + return virtnet_set_guest_offloads(vi, offloads);
>> +}
>> +
>> +static int virtnet_restore_guest_offloads(struct virtnet_info *vi)
>> +{
>> + u64 offloads = vi->guest_offloads;
>> +
>> + if (!vi->guest_offloads)
>> + return 0;
>> + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))
>> + offloads |= 1ULL << VIRTIO_NET_F_GUEST_CSUM;
>> +
>> + return virtnet_set_guest_offloads(vi, offloads);
>> +}
>> +
>> static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
>> struct netlink_ext_ack *extack)
>> {
>> @@ -1905,10 +1954,11 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
>> u16 xdp_qp = 0, curr_qp;
>> int i, err;
>>
>> - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
>> - virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO6) ||
>> - virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) ||
>> - virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO)) {
>> + if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)
>> + && (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
>> + virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO6) ||
>> + virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) ||
>> + virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO))) {
>> NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing LRO, disable LRO first");
>> return -EOPNOTSUPP;
>> }
>> @@ -1955,6 +2005,12 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
>> for (i = 0; i < vi->max_queue_pairs; i++) {
>> old_prog = rtnl_dereference(vi->rq[i].xdp_prog);
>> rcu_assign_pointer(vi->rq[i].xdp_prog, prog);
>> + if (i == 0) {
>> + if (!old_prog)
>> + virtnet_clear_guest_offloads(vi);
>> + if (!prog)
>> + virtnet_restore_guest_offloads(vi);
>> + }
>> if (old_prog)
>> bpf_prog_put(old_prog);
>> virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
>> @@ -2588,6 +2644,10 @@ static int virtnet_probe(struct virtio_device *vdev)
>> netif_carrier_on(dev);
>> }
>>
>> + for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
>> + if (virtio_has_feature(vi->vdev, guest_offloads[i]))
>> + set_bit(guest_offloads[i], &vi->guest_offloads);
>> +
>> pr_debug("virtnet: registered device %s with %d RX and TX vq's\n",
>> dev->name, max_queue_pairs);
>>
>> @@ -2684,7 +2744,7 @@ static struct virtio_device_id id_table[] = {
>> VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, \
>> VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, \
>> VIRTIO_NET_F_CTRL_MAC_ADDR, \
>> - VIRTIO_NET_F_MTU
>> + VIRTIO_NET_F_MTU, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS
>>
>> static unsigned int features[] = {
>> VIRTNET_FEATURES,
>> --
>> 2.7.4
^ permalink raw reply
* Re: [RFC] switchdev: clarify ndo_get_phys_port_name() formats
From: Jakub Kicinski @ 2017-07-26 2:34 UTC (permalink / raw)
To: Andy Gospodarek
Cc: netdev, Jiri Pirko, Or Gerlitz, Michael Chan, Sathya Perla,
simon.horman, davem
In-Reply-To: <20170726014815.GA73972@C02RW35GFVH8.greyhouse.net>
On Tue, 25 Jul 2017 21:48:15 -0400, Andy Gospodarek wrote:
> On Tue, Jul 25, 2017 at 03:26:47PM -0700, Jakub Kicinski wrote:
> > On Tue, 25 Jul 2017 11:22:41 -0400, Andy Gospodarek wrote:
> > > On Mon, Jul 24, 2017 at 10:13:44PM -0700, Jakub Kicinski wrote:
> > > > We are still in position where we can suggest uniform naming
> > > > convention for ndo_get_phys_port_name(). switchdev.txt file
> > > > already contained a suggestion of how to name external ports.
> > > > Since the use of switchdev for SR-IOV NIC's eswitches is growing,
> > > > establish a format for ports of those devices as well.
> > > >
> > > > Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
> > >
> > > This is a nice addition and I suspect there could be even more done to
> > > update this file to cover the VF rep usage.
> > >
> > > > ---
> > > > Documentation/networking/switchdev.txt | 14 +++++++++++---
> > > > 1 file changed, 11 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
> > > > index 3e7b946dea27..7c4b6025fb4b 100644
> > > > --- a/Documentation/networking/switchdev.txt
> > > > +++ b/Documentation/networking/switchdev.txt
> > > > @@ -119,9 +119,17 @@ into 4 10G ports, resulting in 4 port netdevs, the device can give a unique
> > > > SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \
> > > > ATTR{phys_port_name}!="", NAME="swX$attr{phys_port_name}"
> > > >
> > > > -Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y
> > > > -is the port name or ID, and Z is the sub-port name or ID. For example, sw1p1s0
> > > > -would be sub-port 0 on port 1 on switch 1.
> > > > +Suggested formats of the port name returned by ndo_get_phys_port_name are:
> > > > + - pA for external ports;
> > > > + - pAsB for split external ports;
> > > > + - pfC for PF ports (so called PF representors);
> > > > + - pfCvfD for VF ports (so called VF representors).
> > >
> > > I hate to clutter this up, but might be also need to add:
> > >
> > > - pfCsB for split PF ports (so called PF representors);
> > > - pfCsBvfD for split VF ports (so called VF representors).
> > >
> > > or are we comfortable that these additions to the name for split ports
> > > are implied?
> >
> > Hm.. What is a split PF port? Splits happen on the physical port - see
> > my rant on the thread this is a reply to ;) PFs are PCIe functions,
> > on the opposite side of the eswitch from the wires.
>
> I'm with you that I think there is value in separate netdevs to
> represent "PFs, VFs and external ports/MACs" -- particularly for the
> use-case you to create rules to control PF<->VF traffic.
>
> So while I'm not saying it is a _great_ idea to support such a thing as
> port-splitting of PFs, I suggested this addition as I'm not willing to restrict
> such a design/implementation if a vendor or customer desired. It seemed
> useful to provde some guidance on how to name them -- even if we do not
> like them. :-)
If I understand you correctly split PF would be a situation where
device has multiple port instances on the PCIe PF side? IOW switch sees
multiple endpoints on the PF side? Let me attempt an ASCII diagram :)
HOST A || HOST B
||
PF A | V | V | V | V || PF B | V | V | V
| F | F | F | F ... || | F | F | F ...
port A0 | port A1 | 0 | 1 | 2 | 3 || port B0 | port B1 | 0 | 1 | 2
||
PCI Express link || PCI Express link
\ \ \ | | | | | / / /
\ \ \ | | | | | / / /
\______\______\' | | | '____/___/___/
/---------------------------\
|<<========== |
| ==========>> |
| SR-IOV e-switch |
|<<========== |
| ==========>> |
\---------------------------/
| | |
| | |
|| ||
MAC 0 || MAC 1 || MAC 2
|| ||
Seems to be a valid configuration, perhaps this would actually be of
some use in container workloads, especially if the ports could be
instantiated at runtime in high numbers. I would be cautious though
with calling the instances splits. The more different PFs look from
MACs the better IMHO. Do you actually have that problem today? Is
there any HW supported upstream which would benefit from this? Could we
decide on naming when we have an example implementation? In theory
nothing stops us from splitting VFs the same way.
Another note on PF netdevs, perhaps the most awkward thing about them,
is that they result in two netdevs being visible to the host. This is
not incorrect, since VFs if unassigned to VMs will end up creating an
"actual" netdev and the switchdev port representor too, but it rubs
some people the wrong way. Which in turn makes those people try to not
spawn separate netdevs, which is incorrect IMHO, and breaks down e.g.
when the real netdev gets assigned to a namespace.
I'm not sure if this clarifies my thinking, I have, however, seem to
have drawn a moose :)
^ permalink raw reply
* [PATCH iproute2] geneve: support for modifying geneve device
From: Girish Moodalbail @ 2017-07-26 2:11 UTC (permalink / raw)
To: stephen, netdev
Ability to change geneve device attributes was added to kernel through
commit 5b861f6baa3a ("geneve: add rtnl changelink support"), however one
cannot do the same through ip-link(8) command. Changing the allowed
geneve device attributes using 'ip link set <geneve_name> type geneve id
<geneve_id> <allowed_attributes>' currently fails with 'operation not
supported' error. This patch adds support for it.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
---
ip/iplink_geneve.c | 82 +++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 60 insertions(+), 22 deletions(-)
diff --git a/ip/iplink_geneve.c b/ip/iplink_geneve.c
index 2c510fc..594a3e5 100644
--- a/ip/iplink_geneve.c
+++ b/ip/iplink_geneve.c
@@ -15,6 +15,8 @@
#include "utils.h"
#include "ip_common.h"
+#define GENEVE_ATTRSET(attrs, type) (((attrs) & (1L << (type))) != 0)
+
static void print_explain(FILE *f)
{
fprintf(f,
@@ -42,11 +44,20 @@ static void explain(void)
print_explain(stderr);
}
+static void check_duparg(__u64 *attrs, int type, const char *key,
+ const char *argv)
+{
+ if (!GENEVE_ATTRSET(*attrs, type)) {
+ *attrs |= (1L << type);
+ return;
+ }
+ duparg2(key, argv);
+}
+
static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
struct nlmsghdr *n)
{
__u32 vni = 0;
- int vni_set = 0;
__u32 daddr = 0;
struct in6_addr daddr6 = IN6ADDR_ANY_INIT;
__u32 label = 0;
@@ -55,22 +66,24 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
__u16 dstport = 0;
bool metadata = 0;
__u8 udpcsum = 0;
- bool udpcsum_set = false;
__u8 udp6zerocsumtx = 0;
- bool udp6zerocsumtx_set = false;
__u8 udp6zerocsumrx = 0;
- bool udp6zerocsumrx_set = false;
+ __u64 attrs = 0;
+ bool set_op = (n->nlmsg_type == RTM_NEWLINK &&
+ !(n->nlmsg_flags & NLM_F_CREATE));
while (argc > 0) {
if (!matches(*argv, "id") ||
!matches(*argv, "vni")) {
NEXT_ARG();
+ check_duparg(&attrs, IFLA_GENEVE_ID, "id", *argv);
if (get_u32(&vni, *argv, 0) ||
vni >= 1u << 24)
invarg("invalid id", *argv);
- vni_set = 1;
} else if (!matches(*argv, "remote")) {
NEXT_ARG();
+ check_duparg(&attrs, IFLA_GENEVE_REMOTE, "remote",
+ *argv);
if (!inet_get_addr(*argv, &daddr, &daddr6)) {
fprintf(stderr, "Invalid address \"%s\"\n", *argv);
return -1;
@@ -82,6 +95,7 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
unsigned int uval;
NEXT_ARG();
+ check_duparg(&attrs, IFLA_GENEVE_TTL, "ttl", *argv);
if (strcmp(*argv, "inherit") != 0) {
if (get_unsigned(&uval, *argv, 0))
invarg("invalid TTL", *argv);
@@ -94,6 +108,7 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
__u32 uval;
NEXT_ARG();
+ check_duparg(&attrs, IFLA_GENEVE_TOS, "tos", *argv);
if (strcmp(*argv, "inherit") != 0) {
if (rtnl_dsfield_a2n(&uval, *argv))
invarg("bad TOS value", *argv);
@@ -105,36 +120,50 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
__u32 uval;
NEXT_ARG();
+ check_duparg(&attrs, IFLA_GENEVE_LABEL, "flowlabel",
+ *argv);
if (get_u32(&uval, *argv, 0) ||
(uval & ~LABEL_MAX_MASK))
invarg("invalid flowlabel", *argv);
label = htonl(uval);
} else if (!matches(*argv, "dstport")) {
NEXT_ARG();
+ check_duparg(&attrs, IFLA_GENEVE_PORT, "dstport",
+ *argv);
if (get_u16(&dstport, *argv, 0))
invarg("dstport", *argv);
} else if (!matches(*argv, "external")) {
+ check_duparg(&attrs, IFLA_GENEVE_COLLECT_METADATA,
+ *argv, *argv);
metadata = true;
} else if (!matches(*argv, "noexternal")) {
+ check_duparg(&attrs, IFLA_GENEVE_COLLECT_METADATA,
+ *argv, *argv);
metadata = false;
} else if (!matches(*argv, "udpcsum")) {
+ check_duparg(&attrs, IFLA_GENEVE_UDP_CSUM, *argv,
+ *argv);
udpcsum = 1;
- udpcsum_set = true;
} else if (!matches(*argv, "noudpcsum")) {
+ check_duparg(&attrs, IFLA_GENEVE_UDP_CSUM, *argv,
+ *argv);
udpcsum = 0;
- udpcsum_set = true;
} else if (!matches(*argv, "udp6zerocsumtx")) {
+ check_duparg(&attrs, IFLA_GENEVE_UDP_ZERO_CSUM6_TX,
+ *argv, *argv);
udp6zerocsumtx = 1;
- udp6zerocsumtx_set = true;
} else if (!matches(*argv, "noudp6zerocsumtx")) {
+ check_duparg(&attrs, IFLA_GENEVE_UDP_ZERO_CSUM6_TX,
+ *argv, *argv);
udp6zerocsumtx = 0;
- udp6zerocsumtx_set = true;
} else if (!matches(*argv, "udp6zerocsumrx")) {
+ check_duparg(&attrs, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
+ *argv, *argv);
udp6zerocsumrx = 1;
- udp6zerocsumrx_set = true;
} else if (!matches(*argv, "noudp6zerocsumrx")) {
+ check_duparg(&attrs, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
+ *argv, *argv);
udp6zerocsumrx = 0;
- udp6zerocsumrx_set = true;
} else if (matches(*argv, "help") == 0) {
explain();
return -1;
@@ -146,19 +175,23 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
argc--, argv++;
}
- if (metadata && vni_set) {
+ if (metadata && GENEVE_ATTRSET(attrs, IFLA_GENEVE_ID)) {
fprintf(stderr, "geneve: both 'external' and vni cannot be specified\n");
return -1;
}
if (!metadata) {
/* parameter checking make sense only for full geneve tunnels */
- if (!vni_set) {
+ if (!GENEVE_ATTRSET(attrs, IFLA_GENEVE_ID)) {
fprintf(stderr, "geneve: missing virtual network identifier\n");
return -1;
}
- if (!daddr && IN6_IS_ADDR_UNSPECIFIED(&daddr6)) {
+ /* If we are modifying the geneve device, then we only need the
+ * ID (VNI) to identify the geneve device, and we do not need
+ * the remote IP.
+ */
+ if (!set_op && !daddr && IN6_IS_ADDR_UNSPECIFIED(&daddr6)) {
fprintf(stderr, "geneve: remote link partner not specified\n");
return -1;
}
@@ -167,20 +200,25 @@ static int geneve_parse_opt(struct link_util *lu, int argc, char **argv,
addattr32(n, 1024, IFLA_GENEVE_ID, vni);
if (daddr)
addattr_l(n, 1024, IFLA_GENEVE_REMOTE, &daddr, 4);
- if (!IN6_IS_ADDR_UNSPECIFIED(&daddr6))
- addattr_l(n, 1024, IFLA_GENEVE_REMOTE6, &daddr6, sizeof(struct in6_addr));
- addattr32(n, 1024, IFLA_GENEVE_LABEL, label);
- addattr8(n, 1024, IFLA_GENEVE_TTL, ttl);
- addattr8(n, 1024, IFLA_GENEVE_TOS, tos);
+ if (!IN6_IS_ADDR_UNSPECIFIED(&daddr6)) {
+ addattr_l(n, 1024, IFLA_GENEVE_REMOTE6, &daddr6,
+ sizeof(struct in6_addr));
+ }
+ if (!set_op || GENEVE_ATTRSET(attrs, IFLA_GENEVE_LABEL))
+ addattr32(n, 1024, IFLA_GENEVE_LABEL, label);
+ if (!set_op || GENEVE_ATTRSET(attrs, IFLA_GENEVE_TTL))
+ addattr8(n, 1024, IFLA_GENEVE_TTL, ttl);
+ if (!set_op || GENEVE_ATTRSET(attrs, IFLA_GENEVE_TOS))
+ addattr8(n, 1024, IFLA_GENEVE_TOS, tos);
if (dstport)
addattr16(n, 1024, IFLA_GENEVE_PORT, htons(dstport));
if (metadata)
addattr(n, 1024, IFLA_GENEVE_COLLECT_METADATA);
- if (udpcsum_set)
+ if (GENEVE_ATTRSET(attrs, IFLA_GENEVE_UDP_CSUM))
addattr8(n, 1024, IFLA_GENEVE_UDP_CSUM, udpcsum);
- if (udp6zerocsumtx_set)
+ if (GENEVE_ATTRSET(attrs, IFLA_GENEVE_UDP_ZERO_CSUM6_TX))
addattr8(n, 1024, IFLA_GENEVE_UDP_ZERO_CSUM6_TX, udp6zerocsumtx);
- if (udp6zerocsumrx_set)
+ if (GENEVE_ATTRSET(attrs, IFLA_GENEVE_UDP_ZERO_CSUM6_RX))
addattr8(n, 1024, IFLA_GENEVE_UDP_ZERO_CSUM6_RX, udp6zerocsumrx);
return 0;
--
1.8.3.1
^ permalink raw reply related
* Re: [PATCH net] net: dsa: Initialize ds->cpu_port_mask earlier
From: Sean Wang @ 2017-07-26 2:13 UTC (permalink / raw)
To: Florian Fainelli; +Cc: netdev, andrew, vivien.didelot, davem, linux-mediatek
In-Reply-To: <20170724174923.29156-1-f.fainelli@gmail.com>
Hi, Florian
the solution is better and also can fix the problem I originally
reported. Thank for your immediate help :-)
Sean
On Mon, 2017-07-24 at 10:49 -0700, Florian Fainelli wrote:
> The mt7530 driver has its dsa_switch_ops::get_tag_protocol function
> check ds->cpu_port_mask to issue a warning in case the configured CPU
> port is not capable of supporting tags.
>
> After commit 14be36c2c96c ("net: dsa: Initialize all CPU and enabled
> ports masks in dsa_ds_parse()") we slightly re-arranged the
> initialization such that this was no longer working. Just make sure that
> ds->cpu_port_mask is set prior to the first call to get_tag_protocol,
> thus restoring the expected contract. In case of error, the CPU port bit
> is cleared.
>
> Fixes: 14be36c2c96c ("net: dsa: Initialize all CPU and enabled ports masks in dsa_ds_parse()")
> Reported-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> Sean, can you check this does fix the problem you originally reported
> correctly for you? Thanks!
>
> net/dsa/dsa2.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
> index 56e46090526b..c442051d5a55 100644
> --- a/net/dsa/dsa2.c
> +++ b/net/dsa/dsa2.c
> @@ -509,21 +509,22 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
> dst->cpu_dp->netdev = ethernet_dev;
> }
>
> + /* Initialize cpu_port_mask now for drv->setup()
> + * to have access to a correct value, just like what
> + * net/dsa/dsa.c::dsa_switch_setup_one does.
> + */
> + ds->cpu_port_mask |= BIT(index);
> +
> tag_protocol = ds->ops->get_tag_protocol(ds);
> dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
> if (IS_ERR(dst->tag_ops)) {
> dev_warn(ds->dev, "No tagger for this switch\n");
> + ds->cpu_port_mask &= ~BIT(index);
> return PTR_ERR(dst->tag_ops);
> }
>
> dst->rcv = dst->tag_ops->rcv;
>
> - /* Initialize cpu_port_mask now for drv->setup()
> - * to have access to a correct value, just like what
> - * net/dsa/dsa.c::dsa_switch_setup_one does.
> - */
> - ds->cpu_port_mask |= BIT(index);
> -
> return 0;
> }
>
^ permalink raw reply
* RE: [PATCH net-next] TLP: Don't reschedule PTO when there's one outstanding TLP retransmission.
From: maowenan @ 2017-07-26 2:12 UTC (permalink / raw)
To: Neal Cardwell
Cc: Netdev, David Miller, weiyongjun (A), Chenweilong, Yuchung Cheng,
Nandita Dukkipati, Wangkefeng (Kevin)
In-Reply-To: <CADVnQykr0YTB7YD=9n04bA8WFBQWku4qsPUZpqgKK6YGmd9xBA@mail.gmail.com>
> -----Original Message-----
> From: Neal Cardwell [mailto:ncardwell@google.com]
> Sent: Tuesday, July 25, 2017 9:30 PM
> To: maowenan
> Cc: Netdev; David Miller; weiyongjun (A); Chenweilong; Yuchung Cheng;
> Nandita Dukkipati
> Subject: Re: [PATCH net-next] TLP: Don't reschedule PTO when there's one
> outstanding TLP retransmission.
>
> On Tue, Jul 25, 2017 at 4:35 AM, Mao Wenan <maowenan@huawei.com>
> wrote:
> > If there is one TLP probe went out(TLP use the write_queue_tail packet
> > as TLP probe, we assume this first TLP probe named A), and this TLP
> > probe was not acked by receive side.
> >
> > Then the transmit side sent the next two packetes out(named B,C), but
> > unfortunately these two packets are also not acked by receive side.
> >
> > And then there is one data packet with ack_seq A arrive, in tcp_ack()
> > will call tcp_schedule_loss_probe() to rearm PTO, the handler
> > tcp_send_loss_probe() pass if(tp->tlp_high_seq)(because there is one
> > outstanding TLP named A,tp->tlp_high_seq is not zero), so the new TLP
> > probe can't be went out and need to rearm the RTO timer(timeout is
> > relative to the transmit time of the write queue head).
> >
> > After this, another data packet with ack_seq A is received, if the
> > tlp_time_stamp is after rto_time_stamp, it will reset the TLP timeout
> > with delta value, which is before previous RTO timeout, so PTO is
> > rearm and previous RTO is cleared. This TLP probe also can't be sent
> > out because of tp->tlp_high_seq != 0, so there is no way(or need very
> > long time)to retransmit the packet because of TLP A is lost.
> >
> > This fix is not to pass the if(tp->tlp_high_seq) in
> > tcp_schedule_loss_probe() when TLP PTO is after RTO, It is no need to
> > reschedule PTO when there is one outstanding TLP retransmission, so if
> > the TLP A is lost then RTO can retransmit that packet, and
> > tp->tlp_high_seq will be set to 0. After this TLP will go to the normal work
> process.
> >
> > Signed-off-by: Mao Wenan <maowenan@huawei.com>
>
> Thanks for posting this. This is a pretty involved scenario. To help
> document/test precisely what the behavior is before and after your patch,
> would you be able to post a packetdrill ( https://github.com/google/packetdrill )
> test case for this scenario?
>
> Can I ask if you saw this scenario in an actual trace, or noticed this by
> inspection?
[Mao Wenan] It is my actual product scenario, from some debug trace info
I found that PTO is always rescheduled before RTO, this is PTO is trigged
by receiving one tcp_ack packets. After this patch, the product works well and
there is no previous issue happen. The packet can retransmit with RTO if TLP probe
is lost.
I will say sorry that my local test can't reproduce because i can't build successfully the same
complex scenario, I don't have mature test case to reproduce now but I will do my best to try
in local test environment.
Thank you.
>
> thanks,
> neal
^ permalink raw reply
* Re: [RFC] switchdev: clarify ndo_get_phys_port_name() formats
From: Andy Gospodarek @ 2017-07-26 1:48 UTC (permalink / raw)
To: Jakub Kicinski
Cc: netdev, Jiri Pirko, Or Gerlitz, Michael Chan, Sathya Perla,
simon.horman, davem
In-Reply-To: <20170725152647.571d1af3@cakuba.netronome.com>
On Tue, Jul 25, 2017 at 03:26:47PM -0700, Jakub Kicinski wrote:
> On Tue, 25 Jul 2017 11:22:41 -0400, Andy Gospodarek wrote:
> > On Mon, Jul 24, 2017 at 10:13:44PM -0700, Jakub Kicinski wrote:
> > > We are still in position where we can suggest uniform naming
> > > convention for ndo_get_phys_port_name(). switchdev.txt file
> > > already contained a suggestion of how to name external ports.
> > > Since the use of switchdev for SR-IOV NIC's eswitches is growing,
> > > establish a format for ports of those devices as well.
> > >
> > > Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
> >
> > This is a nice addition and I suspect there could be even more done to
> > update this file to cover the VF rep usage.
> >
> > > ---
> > > Documentation/networking/switchdev.txt | 14 +++++++++++---
> > > 1 file changed, 11 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
> > > index 3e7b946dea27..7c4b6025fb4b 100644
> > > --- a/Documentation/networking/switchdev.txt
> > > +++ b/Documentation/networking/switchdev.txt
> > > @@ -119,9 +119,17 @@ into 4 10G ports, resulting in 4 port netdevs, the device can give a unique
> > > SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \
> > > ATTR{phys_port_name}!="", NAME="swX$attr{phys_port_name}"
> > >
> > > -Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y
> > > -is the port name or ID, and Z is the sub-port name or ID. For example, sw1p1s0
> > > -would be sub-port 0 on port 1 on switch 1.
> > > +Suggested formats of the port name returned by ndo_get_phys_port_name are:
> > > + - pA for external ports;
> > > + - pAsB for split external ports;
> > > + - pfC for PF ports (so called PF representors);
> > > + - pfCvfD for VF ports (so called VF representors).
> >
> > I hate to clutter this up, but might be also need to add:
> >
> > - pfCsB for split PF ports (so called PF representors);
> > - pfCsBvfD for split VF ports (so called VF representors).
> >
> > or are we comfortable that these additions to the name for split ports
> > are implied?
>
> Hm.. What is a split PF port? Splits happen on the physical port - see
> my rant on the thread this is a reply to ;) PFs are PCIe functions,
> on the opposite side of the eswitch from the wires.
I'm with you that I think there is value in separate netdevs to
represent "PFs, VFs and external ports/MACs" -- particularly for the
use-case you to create rules to control PF<->VF traffic.
So while I'm not saying it is a _great_ idea to support such a thing as
port-splitting of PFs, I suggested this addition as I'm not willing to restrict
such a design/implementation if a vendor or customer desired. It seemed
useful to provde some guidance on how to name them -- even if we do not
like them. :-)
^ permalink raw reply
* RE: [PATCH net-next] TLP: Don't reschedule PTO when there's one outstanding TLP retransmission.
From: maowenan @ 2017-07-26 1:26 UTC (permalink / raw)
To: Sergei Shtylyov, netdev@vger.kernel.org, davem@davemloft.net,
weiyongjun (A), Chenweilong
In-Reply-To: <549b181d-b925-35ca-193c-2bc641ab901a@cogentembedded.com>
> -----Original Message-----
> From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
> Sent: Tuesday, July 25, 2017 5:55 PM
> To: maowenan; netdev@vger.kernel.org; davem@davemloft.net; weiyongjun
> (A); Chenweilong
> Subject: Re: [PATCH net-next] TLP: Don't reschedule PTO when there's one
> outstanding TLP retransmission.
>
> Hello!
>
> On 7/25/2017 11:35 AM, Mao Wenan wrote:
>
> > If there is one TLP probe went out(TLP use the write_queue_tail packet
> > as TLP probe, we assume this first TLP probe named A), and this TLP
> > probe was not acked by receive side.
> >
> > Then the transmit side sent the next two packetes out(named B,C), but
> > unfortunately these two packets are also not acked by receive side.
> >
> > And then there is one data packet with ack_seq A arrive, in tcp_ack()
> > will call tcp_schedule_loss_probe() to rearm PTO, the handler
> > tcp_send_loss_probe() pass if(tp->tlp_high_seq)(because there is one
> > outstanding TLP named A,tp->tlp_high_seq is not zero), so the new TLP
> > probe can't be went out and need to rearm the RTO timer(timeout is
> > relative to the transmit time of the write queue head).
> >
> > After this, another data packet with ack_seq A is received, if the
> > tlp_time_stamp is after rto_time_stamp, it will reset the TLP timeout
> > with delta value, which is before previous RTO timeout, so PTO is
> > rearm and previous RTO is cleared. This TLP probe also can't be sent
> > out because of tp->tlp_high_seq != 0, so there is no way(or need very
> > long time)to retransmit the packet because of TLP A is lost.
> >
> > This fix is not to pass the if(tp->tlp_high_seq) in
> > tcp_schedule_loss_probe() when TLP PTO is after RTO, It is no need to
> > reschedule PTO when there is one outstanding TLP retransmission, so if
> > the TLP A is lost then RTO can retransmit that packet, and
> > tp->tlp_high_seq will be set to 0. After this TLP will go to the normal work
> process.
> >
> > Signed-off-by: Mao Wenan <maowenan@huawei.com>
> > ---
> > net/ipv4/tcp_output.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index
> > 886d874..0c8da1c 100644
> > --- a/net/ipv4/tcp_output.c
> > +++ b/net/ipv4/tcp_output.c
> > @@ -2423,6 +2423,10 @@ bool tcp_schedule_loss_probe(struct sock *sk)
> > tlp_time_stamp = tcp_jiffies32 + timeout;
> > rto_time_stamp = (u32)inet_csk(sk)->icsk_timeout;
> > if ((s32)(tlp_time_stamp - rto_time_stamp) > 0) {
> > + /*It is no need to reschedule PTO when there is one outstanding TLP
> > +retransmission*/
>
> Please add space after /* and before */
Ok, thank you.
>
> > + if (tp->tlp_high_seq) {
> > + return false;
> > + }
>
> {} not needed.
Ok, I will send the V2.
>
> [...]
>
> MBR, Sergei
^ permalink raw reply
* Re: [PATCH net-next 10/18] net: mvpp2: use the GoP interrupt for link status changes
From: Antoine Tenart @ 2017-07-26 0:07 UTC (permalink / raw)
To: Thomas Petazzoni
Cc: Antoine Tenart, davem, jason, andrew, gregory.clement,
sebastian.hesselbarth, nadavh, linux, mw, stefanc, netdev,
linux-arm-kernel
In-Reply-To: <20170725151748.22268390@windsurf.lan>
[-- Attachment #1: Type: text/plain, Size: 734 bytes --]
Hi Thomas,
On Tue, Jul 25, 2017 at 03:17:48PM +0200, Thomas Petazzoni wrote:
> On Mon, 24 Jul 2017 15:48:40 +0200, Antoine Tenart wrote:
> > +
> > + port->link_irq = of_irq_get_byname(port_node, "link");
> > + if (port->link_irq == -EPROBE_DEFER) {
> > + err = -EPROBE_DEFER;
> > + goto err_free_irq;
> > + }
> > + if (port->link_irq <= 0)
> > + /* the link irq is optional */
> > + port->link_irq = 0;
>
> You need to add the irq_dispose_mapping() call corresponding to this
> of_irq_get_by_name() in the error path and in the remove path.
That's right. I'll fix that in v2.
Thanks!
Antoine
--
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* [net-next v4 5/5] ixgbe: Disable flow control for XFI
From: Jeff Kirsher @ 2017-07-25 23:41 UTC (permalink / raw)
To: davem
Cc: Tony Nguyen, netdev, nhorman, sassmann, jogreene, Emil Tantilov,
Jeff Kirsher
In-Reply-To: <20170725234138.42283-1-jeffrey.t.kirsher@intel.com>
From: Tony Nguyen <anthony.l.nguyen@intel.com>
Flow control autonegotiation is not supported for XFI. Make sure that
ixgbe_device_supports_autoneg_fc() returns false and
hw->fc.disable_fc_autoneg is set to true to avoid running the fc_autoneg
function for that device.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 5 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 57 ++++++++++++++-----------
2 files changed, 35 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 40ae7db468ea..2c19070d2a0b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -97,7 +97,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
break;
case ixgbe_media_type_backplane:
- supported = true;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_XFI)
+ supported = false;
+ else
+ supported = true;
break;
case ixgbe_media_type_copper:
/* only some copper devices support flow control autoneg */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 95adbda36235..19fbb2f28ea4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -2843,7 +2843,7 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
{
bool pause, asm_dir;
u32 reg_val;
- s32 rc;
+ s32 rc = 0;
/* Validate the requested mode */
if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
@@ -2886,32 +2886,37 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
return IXGBE_ERR_CONFIG;
}
- if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR &&
- hw->device_id != IXGBE_DEV_ID_X550EM_A_KR &&
- hw->device_id != IXGBE_DEV_ID_X550EM_A_KR_L)
- return 0;
-
- rc = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY,
- ®_val);
- if (rc)
- return rc;
-
- reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
- IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
- if (pause)
- reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
- if (asm_dir)
- reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
- rc = hw->mac.ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY,
- reg_val);
-
- /* This device does not fully support AN. */
- hw->fc.disable_fc_autoneg = true;
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ case IXGBE_DEV_ID_X550EM_A_KR:
+ case IXGBE_DEV_ID_X550EM_A_KR_L:
+ rc = hw->mac.ops.read_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY,
+ ®_val);
+ if (rc)
+ return rc;
+ reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+ IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
+ if (pause)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
+ if (asm_dir)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+ rc = hw->mac.ops.write_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY,
+ reg_val);
+
+ /* This device does not fully support AN. */
+ hw->fc.disable_fc_autoneg = true;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_XFI:
+ hw->fc.disable_fc_autoneg = true;
+ break;
+ default:
+ break;
+ }
return rc;
}
--
2.13.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox