* [PATCH net-next 3/7] rtnetlink: add helper to dump qdisc name
From: Florian Westphal @ 2017-09-21 16:58 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal
In-Reply-To: <20170921165902.10746-1-fw@strlen.de>
We can use rcu here to make this safe even if we would not hold rtnl,
qdisc_destroy uses call_rcu to delay free of the qdisc for one grace period.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/core/rtnetlink.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index c801212ee40e..ad3f27da37a8 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1332,6 +1332,19 @@ static int nla_put_iflink(struct sk_buff *skb, const struct net_device *dev)
return nla_put_u32(skb, IFLA_LINK, ifindex);
}
+static int nla_put_qdisc(struct sk_buff *skb, struct net_device *dev)
+{
+ struct Qdisc *q;
+ int ret = 0;
+
+ rcu_read_lock();
+ q = READ_ONCE(dev->qdisc);
+ if (q)
+ ret = nla_put_string(skb, IFLA_QDISC, q->ops->id);
+ rcu_read_unlock();
+ return ret;
+}
+
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
unsigned int flags, u32 ext_filter_mask,
@@ -1372,8 +1385,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
nla_put_iflink(skb, dev) ||
put_master_ifindex(skb, dev) ||
nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) ||
- (dev->qdisc &&
- nla_put_string(skb, IFLA_QDISC, dev->qdisc->ops->id)) ||
+ nla_put_qdisc(skb, dev) ||
(dev->ifalias &&
nla_put_string(skb, IFLA_IFALIAS, dev->ifalias)) ||
nla_put_u32(skb, IFLA_CARRIER_CHANGES,
--
2.13.5
^ permalink raw reply related
* [PATCH net-next 4/7] rtnetlink: add helper to dump ifalias
From: Florian Westphal @ 2017-09-21 16:58 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal
In-Reply-To: <20170921165902.10746-1-fw@strlen.de>
ifalias is currently protected by rtnl mutex, add assertion
as a reminder.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/core/rtnetlink.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index ad3f27da37a8..1af3ef7f329d 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1345,6 +1345,16 @@ static int nla_put_qdisc(struct sk_buff *skb, struct net_device *dev)
return ret;
}
+static int noinline nla_put_ifalias(struct sk_buff *skb, struct net_device *dev)
+{
+ ASSERT_RTNL();
+
+ if (dev->ifalias)
+ return nla_put_string(skb, IFLA_IFALIAS, dev->ifalias);
+
+ return 0;
+}
+
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
unsigned int flags, u32 ext_filter_mask,
@@ -1386,8 +1396,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
put_master_ifindex(skb, dev) ||
nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) ||
nla_put_qdisc(skb, dev) ||
- (dev->ifalias &&
- nla_put_string(skb, IFLA_IFALIAS, dev->ifalias)) ||
+ nla_put_ifalias(skb, dev) ||
nla_put_u32(skb, IFLA_CARRIER_CHANGES,
atomic_read(&dev->carrier_changes)) ||
nla_put_u8(skb, IFLA_PROTO_DOWN, dev->proto_down))
--
2.13.5
^ permalink raw reply related
* [PATCH net-next 5/7] rtnetlink: add helper to dump vf information
From: Florian Westphal @ 2017-09-21 16:59 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal
In-Reply-To: <20170921165902.10746-1-fw@strlen.de>
similar to earlier patches, split out more parts of this function to
better see what is happening and where we assume rtnl is locked.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/core/rtnetlink.c | 80 ++++++++++++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 30 deletions(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 1af3ef7f329d..7503021fe308 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1211,6 +1211,36 @@ static noinline_for_stack int rtnl_fill_vfinfo(struct sk_buff *skb,
return -EMSGSIZE;
}
+static noinline_for_stack int rtnl_fill_vf(struct sk_buff *skb,
+ struct net_device *dev,
+ u32 ext_filter_mask)
+{
+ struct nlattr *vfinfo;
+ int i, num_vfs;
+
+ if (!dev->dev.parent || ((ext_filter_mask & RTEXT_FILTER_VF) == 0))
+ return 0;
+
+ num_vfs = dev_num_vf(dev->dev.parent);
+ if (nla_put_u32(skb, IFLA_NUM_VF, num_vfs))
+ return -EMSGSIZE;
+
+ if (!dev->netdev_ops->ndo_get_vf_config)
+ return 0;
+
+ vfinfo = nla_nest_start(skb, IFLA_VFINFO_LIST);
+ if (!vfinfo)
+ return -EMSGSIZE;
+
+ for (i = 0; i < num_vfs; i++) {
+ if (rtnl_fill_vfinfo(skb, dev, i, vfinfo))
+ return -EMSGSIZE;
+ }
+
+ nla_nest_end(skb, vfinfo);
+ return 0;
+}
+
static int rtnl_fill_link_ifmap(struct sk_buff *skb, struct net_device *dev)
{
struct rtnl_link_ifmap map;
@@ -1355,6 +1385,23 @@ static int noinline nla_put_ifalias(struct sk_buff *skb, struct net_device *dev)
return 0;
}
+static int noinline rtnl_fill_link_netnsid(struct sk_buff *skb,
+ const struct net_device *dev)
+{
+ if (dev->rtnl_link_ops && dev->rtnl_link_ops->get_link_net) {
+ struct net *link_net = dev->rtnl_link_ops->get_link_net(dev);
+
+ if (!net_eq(dev_net(dev), link_net)) {
+ int id = peernet2id_alloc(dev_net(dev), link_net);
+
+ if (nla_put_s32(skb, IFLA_LINK_NETNSID, id))
+ return -EMSGSIZE;
+ }
+ }
+
+ return 0;
+}
+
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
unsigned int flags, u32 ext_filter_mask,
@@ -1428,27 +1475,9 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
if (rtnl_fill_stats(skb, dev))
goto nla_put_failure;
- if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF) &&
- nla_put_u32(skb, IFLA_NUM_VF, dev_num_vf(dev->dev.parent)))
+ if (rtnl_fill_vf(skb, dev, ext_filter_mask))
goto nla_put_failure;
- if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent &&
- ext_filter_mask & RTEXT_FILTER_VF) {
- int i;
- struct nlattr *vfinfo;
- int num_vfs = dev_num_vf(dev->dev.parent);
-
- vfinfo = nla_nest_start(skb, IFLA_VFINFO_LIST);
- if (!vfinfo)
- goto nla_put_failure;
- for (i = 0; i < num_vfs; i++) {
- if (rtnl_fill_vfinfo(skb, dev, i, vfinfo))
- goto nla_put_failure;
- }
-
- nla_nest_end(skb, vfinfo);
- }
-
if (rtnl_port_fill(skb, dev, ext_filter_mask))
goto nla_put_failure;
@@ -1460,17 +1489,8 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
goto nla_put_failure;
}
- if (dev->rtnl_link_ops &&
- dev->rtnl_link_ops->get_link_net) {
- struct net *link_net = dev->rtnl_link_ops->get_link_net(dev);
-
- if (!net_eq(dev_net(dev), link_net)) {
- int id = peernet2id_alloc(dev_net(dev), link_net);
-
- if (nla_put_s32(skb, IFLA_LINK_NETNSID, id))
- goto nla_put_failure;
- }
- }
+ if (rtnl_fill_link_netnsid(skb, dev))
+ goto nla_put_failure;
if (!(af_spec = nla_nest_start(skb, IFLA_AF_SPEC)))
goto nla_put_failure;
--
2.13.5
^ permalink raw reply related
* [PATCH net-next 6/7] rtnetlink: link ops lookup must occur with rtnl lock held
From: Florian Westphal @ 2017-09-21 16:59 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal
In-Reply-To: <20170921165902.10746-1-fw@strlen.de>
all callers meet this requirement, this serves as reminder to not
forget about this in future rtnl pushdown work.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/core/rtnetlink.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 7503021fe308..7af9774aec40 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -274,6 +274,8 @@ static const struct rtnl_link_ops *rtnl_link_ops_get(const char *kind)
{
const struct rtnl_link_ops *ops;
+ ASSERT_RTNL();
+
list_for_each_entry(ops, &link_ops, list) {
if (!strcmp(ops->kind, kind))
return ops;
@@ -1618,6 +1620,8 @@ static const struct rtnl_link_ops *linkinfo_to_kind_ops(const struct nlattr *nla
const struct rtnl_link_ops *ops = NULL;
struct nlattr *linfo[IFLA_INFO_MAX + 1];
+ ASSERT_RTNL();
+
if (nla_parse_nested(linfo, IFLA_INFO_MAX, nla,
ifla_info_policy, NULL) < 0)
return NULL;
--
2.13.5
^ permalink raw reply related
* [PATCH net-next 7/7] rtnetlink: rtnl_have_link_slave_info doesn't need rtnl
From: Florian Westphal @ 2017-09-21 16:59 UTC (permalink / raw)
To: netdev; +Cc: Florian Westphal
In-Reply-To: <20170921165902.10746-1-fw@strlen.de>
it can be switched to rcu.
rtnl_link_slave_info_fill on the other hand does need it,
at least for now. Add ASSERT_RTNL annotation as a reminder.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/core/rtnetlink.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 7af9774aec40..9fd48b437d64 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -524,11 +524,15 @@ static size_t rtnl_link_get_af_size(const struct net_device *dev,
static bool rtnl_have_link_slave_info(const struct net_device *dev)
{
struct net_device *master_dev;
+ bool ret = false;
- master_dev = netdev_master_upper_dev_get((struct net_device *) dev);
+ rcu_read_lock();
+
+ master_dev = netdev_master_upper_dev_get_rcu((struct net_device *) dev);
if (master_dev && master_dev->rtnl_link_ops)
- return true;
- return false;
+ ret = true;
+ rcu_read_unlock();
+ return ret;
}
static int rtnl_link_slave_info_fill(struct sk_buff *skb,
@@ -539,6 +543,8 @@ static int rtnl_link_slave_info_fill(struct sk_buff *skb,
struct nlattr *slave_data;
int err;
+ ASSERT_RTNL();
+
master_dev = netdev_master_upper_dev_get((struct net_device *) dev);
if (!master_dev)
return 0;
@@ -570,6 +576,8 @@ static int rtnl_link_info_fill(struct sk_buff *skb,
struct nlattr *data;
int err;
+ ASSERT_RTNL();
+
if (!ops)
return 0;
if (nla_put_string(skb, IFLA_INFO_KIND, ops->kind) < 0)
@@ -600,6 +608,8 @@ static int rtnl_link_fill(struct sk_buff *skb, const struct net_device *dev)
struct nlattr *linkinfo;
int err = -EMSGSIZE;
+ ASSERT_RTNL();
+
linkinfo = nla_nest_start(skb, IFLA_LINKINFO);
if (linkinfo == NULL)
goto out;
--
2.13.5
^ permalink raw reply related
* [PATCH 00/64] use setup_timer() helper function.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
This series uses setup_timer() helper function. The series
addresses the files under drivers/net/*.
Allen Pais (64):
drivers: net: de4x: use setup_timer() helper.
drivers: net: b44: use setup_timer() helper.
drivers: net: pcnet32: use setup_timer() helper.
drivers: net: brcm80211: use setup_timer() helper.
drivers : net: niu: use setup_timer() helper.
drivers: net: bcm63xx: use setup_timer() helper.
drivers: net: declance: use setup_timer() helper.
drivers: net: am79c961: use setup_timer() helper.
drivers: net: et131x: use setup_timer() helper.
drivers: net: appletalk: cops: use setup_timer() helper.
drivers: net: rsi_91x: use setup_timer() helper.
drivers: net: atp: use setup_timer() helper.
drivers: net: ns83820: use setup_timer() helper.
drivers: net: ixgb: use setup_timer() helper.
drivers: net: sundance: use setup_timer() helper.
drivers: net: tg3: use setup_timer() helper.
drivers: net: sdla: use setup_timer() helper.
drivers: net: cisco_hdlc: use setup_timer() helper.
drivers: net: slip: use setup_timer() helper.
drivers: net: spider_net: use setup_timer() helper.
drivers: net: sun: cassini: use setup_timer() helper.
drivers: net: natsemi: use setup_timer() helper.
drivers: net: winbond-840: use setup_timer() helper.
drivers: net: enic: use setup_timer() helper.
drivers: net: bnx2: use setup_timer() helper.
drivers: net: xen-netback: use setup_timer() helper.
drivers: net: atmel: use setup_timer() helper.
drivers: net: hippi: use setup_timer() helper.
drivers: net: smsc: use setup_timer() helper.
drivers: net: qlogic: use setup_timer() helper.
drivers: net: e1000e: use setup_timer() helper.
drivers: net: amd: use setup_timer() helper.
drivers: net: amd8111e: use setup_timer() helper.
drivers: net: eql: use setup_timer() helper.
drivers: net: can: usb: use setup_timer() helper.
drivers: net: can: use setup_timer() helper.
drivers: net: arcnet: use setup_timer() helper.
drivers: net: ath6kl: use setup_timer() helper.
drivers: net: sun: use setup_timer() helper.
drivers: net: sis900: use setup_timer() helper.
drivers: net: packetengines: use setup_timer() helper.
drivers: net: mlx5: use setup_timer() helper.
drivers: net: mlx4: use setup_timer() helper.
drivers: net: pxa168: use setup_timer() helper.
drivers: net: fealnx: use setup_timer() helper.
drivers: net: dmfe: use setup_timer() helper.
drivers: net: bnxt: use setup_timer() helper.
drivers: net: amd: use setup_timer() helper.
drivers: net: adi: use setup_timer() helper.
drivers: net: can: sja1000: use setup_timer() helper.
drivers: net: caif: use setup_timer() helper.
drivers: net: appletalk: use setup_timer() helper.
drivers: net: dscc: use setup_timer() helper.
drivers: net: hdlc_ppp: use setup_timer() helper.
drivers: net: hamradio: use setup_timer() helper.
drivers: net: cpsw_ale: use setup_timer() helper.
drivers: net: stmmac: use setup_timer() helper.
drivers: net: packetengines: use setup_timer() helper.
drivers: net: i40evf: use setup_timer() helper.
drivers: net: uli526x: use setup_timer() helper.
drivers: net: enic: use setup_timer() helper.
drivers: net: cxgb: use setup_timer() helper.
drivers: net: bnx2x: use setup_timer() helper.
drivers: net: lmc: use setup_timer() helper.
drivers/net/appletalk/cops.c | 4 +---
drivers/net/appletalk/ltpc.c | 4 +---
drivers/net/arcnet/arcnet.c | 4 +---
drivers/net/caif/caif_hsi.c | 15 ++++++---------
drivers/net/can/grcan.c | 10 ++++------
drivers/net/can/sja1000/peak_pcmcia.c | 4 +---
drivers/net/can/usb/peak_usb/pcan_usb.c | 5 ++---
drivers/net/eql.c | 4 +---
drivers/net/ethernet/adi/bfin_mac.c | 5 ++---
drivers/net/ethernet/agere/et131x.c | 5 ++---
drivers/net/ethernet/amd/a2065.c | 7 +++----
drivers/net/ethernet/amd/am79c961a.c | 4 +---
drivers/net/ethernet/amd/amd8111e.c | 5 ++---
drivers/net/ethernet/amd/declance.c | 6 +++---
drivers/net/ethernet/amd/pcnet32.c | 5 ++---
drivers/net/ethernet/amd/sunlance.c | 5 ++---
drivers/net/ethernet/broadcom/b44.c | 4 +---
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 ++---
drivers/net/ethernet/broadcom/bnx2.c | 4 +---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +---
drivers/net/ethernet/broadcom/tg3.c | 4 +---
drivers/net/ethernet/chelsio/cxgb/sge.c | 5 ++---
drivers/net/ethernet/cisco/enic/enic_clsf.h | 5 ++---
drivers/net/ethernet/cisco/enic/enic_main.c | 5 ++---
drivers/net/ethernet/dec/tulip/de4x5.c | 5 ++---
drivers/net/ethernet/dec/tulip/dmfe.c | 4 +---
drivers/net/ethernet/dec/tulip/uli526x.c | 4 +---
drivers/net/ethernet/dec/tulip/winbond-840.c | 4 +---
drivers/net/ethernet/dlink/sundance.c | 4 +---
drivers/net/ethernet/fealnx.c | 8 ++------
drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++-------
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 5 ++---
drivers/net/ethernet/intel/ixgb/ixgb_main.c | 5 ++---
drivers/net/ethernet/marvell/pxa168_eth.c | 5 ++---
drivers/net/ethernet/mellanox/mlx4/catas.c | 4 +---
drivers/net/ethernet/mellanox/mlx5/core/health.c | 4 +---
drivers/net/ethernet/natsemi/natsemi.c | 4 +---
drivers/net/ethernet/natsemi/ns83820.c | 4 +---
drivers/net/ethernet/packetengines/hamachi.c | 4 +---
drivers/net/ethernet/packetengines/yellowfin.c | 4 +---
drivers/net/ethernet/qlogic/qla3xxx.c | 4 +---
drivers/net/ethernet/realtek/atp.c | 4 +---
drivers/net/ethernet/sis/sis900.c | 4 +---
drivers/net/ethernet/smsc/epic100.c | 4 +---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +---
drivers/net/ethernet/sun/cassini.c | 5 +----
drivers/net/ethernet/sun/niu.c | 4 +---
drivers/net/ethernet/sun/sungem.c | 4 +---
drivers/net/ethernet/ti/cpsw_ale.c | 4 +---
drivers/net/ethernet/toshiba/spider_net.c | 12 +++++-------
drivers/net/hamradio/6pack.c | 4 +---
drivers/net/hippi/rrunner.c | 4 +---
drivers/net/slip/slip.c | 8 ++------
drivers/net/wan/dscc4.c | 4 +---
drivers/net/wan/hdlc_cisco.c | 4 +---
drivers/net/wan/hdlc_ppp.c | 4 +---
drivers/net/wan/lmc/lmc_main.c | 4 +---
drivers/net/wan/sdla.c | 4 +---
drivers/net/wireless/ath/ath6kl/txrx.c | 4 +---
drivers/net/wireless/atmel/atmel.c | 5 ++---
.../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 ++---
drivers/net/wireless/rsi/rsi_91x_hal.c | 5 ++---
drivers/net/xen-netback/interface.c | 3 +--
64 files changed, 102 insertions(+), 216 deletions(-)
--
2.7.4
^ permalink raw reply
* [PATCH 01/64] drivers: net: de4x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/dec/tulip/de4x5.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 0affee9..299812e 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -1147,9 +1147,8 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
lp->timeout = -1;
lp->gendev = gendev;
spin_lock_init(&lp->lock);
- init_timer(&lp->timer);
- lp->timer.function = (void (*)(unsigned long))de4x5_ast;
- lp->timer.data = (unsigned long)dev;
+ setup_timer(&lp->timer, (void (*)(unsigned long))de4x5_ast,
+ (unsigned long)dev);
de4x5_parse_params(dev);
/*
--
2.7.4
^ permalink raw reply related
* [PATCH 02/64] drivers: net: b44: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/b44.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index a1125d1..42e44fc 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -1474,10 +1474,8 @@ static int b44_open(struct net_device *dev)
goto out;
}
- init_timer(&bp->timer);
+ setup_timer(&bp->timer, b44_timer, (unsigned long)bp);
bp->timer.expires = jiffies + HZ;
- bp->timer.data = (unsigned long) bp;
- bp->timer.function = b44_timer;
add_timer(&bp->timer);
b44_enable_ints(bp);
--
2.7.4
^ permalink raw reply related
* [PATCH 03/64] drivers: net: pcnet32: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/amd/pcnet32.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 7f60d17..e461536 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1970,9 +1970,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
lp->options |= PCNET32_PORT_MII;
}
- init_timer(&lp->watchdog_timer);
- lp->watchdog_timer.data = (unsigned long)dev;
- lp->watchdog_timer.function = (void *)&pcnet32_watchdog;
+ setup_timer(&lp->watchdog_timer, (void *)&pcnet32_watchdog,
+ (unsigned long)dev);
/* The PCNET32-specific entries in the device structure. */
dev->netdev_ops = &pcnet32_netdev_ops;
--
2.7.4
^ permalink raw reply related
* [PATCH 04/64] drivers: net: brcm80211: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index aaed4ab..ab3f223 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3260,9 +3260,8 @@ static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
brcmf_cfg80211_escan_handler);
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
/* Init scan_timeout timer */
- init_timer(&cfg->escan_timeout);
- cfg->escan_timeout.data = (unsigned long) cfg;
- cfg->escan_timeout.function = brcmf_escan_timeout;
+ setup_timer(&cfg->escan_timeout, brcmf_escan_timeout,
+ (unsigned long)cfg);
INIT_WORK(&cfg->escan_timeout_work,
brcmf_cfg80211_escan_timeout_worker);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 05/64] drivers : net: niu: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/sun/niu.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 6a4e8e1..bde19b3 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -6123,10 +6123,8 @@ static int niu_open(struct net_device *dev)
err = niu_init_hw(np);
if (!err) {
- init_timer(&np->timer);
+ setup_timer(&np->timer, niu_timer, (unsigned long)np);
np->timer.expires = jiffies + HZ;
- np->timer.data = (unsigned long) np;
- np->timer.function = niu_timer;
err = niu_enable_interrupts(np, 1);
if (err)
--
2.7.4
^ permalink raw reply related
* [PATCH 07/64] drivers: net: declance: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/amd/declance.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 82cc813..9bdf81c 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -1246,9 +1246,9 @@ static int dec_lance_probe(struct device *bdev, const int type)
* can occur from interrupts (ex. IPv6). So we
* use a timer to try again later when necessary. -DaveM
*/
- init_timer(&lp->multicast_timer);
- lp->multicast_timer.data = (unsigned long) dev;
- lp->multicast_timer.function = lance_set_multicast_retry;
+ setup_timer(&lp->multicast_timer, lance_set_multicast_retry,
+ (unsigned long)dev);
+
ret = register_netdev(dev);
if (ret) {
--
2.7.4
^ permalink raw reply related
* [PATCH 09/64] drivers: net: et131x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/agere/et131x.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 54eff90..658e92f 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -3624,11 +3624,10 @@ static int et131x_open(struct net_device *netdev)
int result;
/* Start the timer to track NIC errors */
- init_timer(&adapter->error_timer);
+ setup_timer(&adapter->error_timer, et131x_error_timer_handler,
+ (unsigned long)adapter);
adapter->error_timer.expires = jiffies +
msecs_to_jiffies(TX_ERROR_PERIOD);
- adapter->error_timer.function = et131x_error_timer_handler;
- adapter->error_timer.data = (unsigned long)adapter;
add_timer(&adapter->error_timer);
result = request_irq(irq, et131x_isr,
--
2.7.4
^ permalink raw reply related
* [PATCH 10/64] drivers: net: appletalk: cops: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/appletalk/cops.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 486e1e6..caf0428 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -424,9 +424,7 @@ static int cops_open(struct net_device *dev)
*/
if(lp->board==TANGENT) /* Poll 20 times per second */
{
- init_timer(&cops_timer);
- cops_timer.function = cops_poll;
- cops_timer.data = (unsigned long)dev;
+ setup_timer(&cops_timer, cops_poll, (unsigned long)dev);
cops_timer.expires = jiffies + HZ/20;
add_timer(&cops_timer);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 11/64] drivers: net: rsi_91x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wireless/rsi/rsi_91x_hal.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index 070dfd6..7ad286d 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -411,9 +411,8 @@ static void bl_cmd_timeout(unsigned long priv)
static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout)
{
- init_timer(&adapter->bl_cmd_timer);
- adapter->bl_cmd_timer.data = (unsigned long)adapter;
- adapter->bl_cmd_timer.function = (void *)&bl_cmd_timeout;
+ setup_timer(&adapter->bl_cmd_timer, (void *)&bl_cmd_timeout,
+ (unsigned long)adapter);
adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies);
adapter->blcmd_timer_expired = false;
--
2.7.4
^ permalink raw reply related
* [PATCH 12/64] drivers: net: atp: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/realtek/atp.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c
index bed3468..bdc3833 100644
--- a/drivers/net/ethernet/realtek/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -438,10 +438,8 @@ static int net_open(struct net_device *dev)
hardware_init(dev);
- init_timer(&lp->timer);
+ setup_timer(&lp->timer, atp_timed_checker, (unsigned long)dev);
lp->timer.expires = jiffies + TIMED_CHECKER;
- lp->timer.data = (unsigned long)dev;
- lp->timer.function = atp_timed_checker; /* timer handler */
add_timer(&lp->timer);
netif_start_queue(dev);
--
2.7.4
^ permalink raw reply related
* [PATCH 13/64] drivers: net: ns83820: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/natsemi/ns83820.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
index 729095d..99d3c78 100644
--- a/drivers/net/ethernet/natsemi/ns83820.c
+++ b/drivers/net/ethernet/natsemi/ns83820.c
@@ -1652,9 +1652,7 @@ static int ns83820_open(struct net_device *ndev)
writel(0, dev->base + TXDP_HI);
writel(desc, dev->base + TXDP);
- init_timer(&dev->tx_watchdog);
- dev->tx_watchdog.data = (unsigned long)ndev;
- dev->tx_watchdog.function = ns83820_tx_watch;
+ setup_timer(&dev->tx_watchdog, ns83820_tx_watch, (unsigned long)ndev);
mod_timer(&dev->tx_watchdog, jiffies + 2*HZ);
netif_start_queue(ndev); /* FIXME: wait for phy to come up */
--
2.7.4
^ permalink raw reply related
* [PATCH 14/64] drivers: net: ixgb: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/intel/ixgb/ixgb_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index 5a71319..1e6ec22 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -508,9 +508,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw);
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = ixgb_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
+ setup_timer(&adapter->watchdog_timer, ixgb_watchdog,
+ (unsigned long)adapter);
INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task);
--
2.7.4
^ permalink raw reply related
* [PATCH 15/64] drivers: net: sundance: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/dlink/sundance.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index 2704bcf..6ca9e98 100644
--- a/drivers/net/ethernet/dlink/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c
@@ -913,10 +913,8 @@ static int netdev_open(struct net_device *dev)
ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0));
/* Set the timer to check for link beat. */
- init_timer(&np->timer);
+ setup_timer(&np->timer, netdev_timer, (unsigned long)dev);
np->timer.expires = jiffies + 3*HZ;
- np->timer.data = (unsigned long)dev;
- np->timer.function = netdev_timer; /* timer handler */
add_timer(&np->timer);
/* Enable interrupts by setting the interrupt mask. */
--
2.7.4
^ permalink raw reply related
* [PATCH 16/64] drivers: net: tg3: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/tg3.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 656e6af..d8d5f20 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -11087,9 +11087,7 @@ static void tg3_timer_init(struct tg3 *tp)
tp->asf_multiplier = (HZ / tp->timer_offset) *
TG3_FW_UPDATE_FREQ_SEC;
- init_timer(&tp->timer);
- tp->timer.data = (unsigned long) tp;
- tp->timer.function = tg3_timer;
+ setup_timer(&tp->timer, tg3_timer, (unsigned long)tp);
}
static void tg3_timer_start(struct tg3 *tp)
--
2.7.4
^ permalink raw reply related
* [PATCH 17/64] drivers: net: sdla: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/sdla.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 236c625..0cc4890 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -1617,10 +1617,8 @@ static void setup_sdla(struct net_device *dev)
flp->deassoc = sdla_deassoc;
flp->dlci_conf = sdla_dlci_conf;
- init_timer(&flp->timer);
+ setup_timer(&flp->timer, sdla_poll, (unsigned long)dev);
flp->timer.expires = 1;
- flp->timer.data = (unsigned long) dev;
- flp->timer.function = sdla_poll;
}
static struct net_device *sdla;
--
2.7.4
^ permalink raw reply related
* [PATCH 18/64] drivers: net: cisco_hdlc: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/hdlc_cisco.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a408abc..c696d42 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -293,10 +293,8 @@ static void cisco_start(struct net_device *dev)
st->up = st->txseq = st->rxseq = 0;
spin_unlock_irqrestore(&st->lock, flags);
- init_timer(&st->timer);
+ setup_timer(&st->timer, cisco_timer, (unsigned long)dev);
st->timer.expires = jiffies + HZ; /* First poll after 1 s */
- st->timer.function = cisco_timer;
- st->timer.data = (unsigned long)dev;
add_timer(&st->timer);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 19/64] drivers: net: slip: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/slip/slip.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index 436dd78..eb8a189 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -763,12 +763,8 @@ static struct slip *sl_alloc(dev_t line)
sl->mode = SL_MODE_DEFAULT;
#ifdef CONFIG_SLIP_SMART
/* initialize timer_list struct */
- init_timer(&sl->keepalive_timer);
- sl->keepalive_timer.data = (unsigned long)sl;
- sl->keepalive_timer.function = sl_keepalive;
- init_timer(&sl->outfill_timer);
- sl->outfill_timer.data = (unsigned long)sl;
- sl->outfill_timer.function = sl_outfill;
+ setup_timer(&sl->keepalive_timer, sl_keepalive, (unsigned long)sl);
+ setup_timer(&sl->outfill_timer, sl_outfill, (unsigned long)sl);
#endif
slip_devs[i] = dev;
return sl;
--
2.7.4
^ permalink raw reply related
* [PATCH 20/64] drivers: net: spider_net: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/toshiba/spider_net.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index cec9e70..a913538 100644
--- a/drivers/net/ethernet/toshiba/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -2256,16 +2256,14 @@ spider_net_setup_netdev(struct spider_net_card *card)
pci_set_drvdata(card->pdev, netdev);
- init_timer(&card->tx_timer);
- card->tx_timer.function =
- (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
- card->tx_timer.data = (unsigned long) card;
+ setup_timer(&card->tx_timer,
+ (void(*)(unsigned long))spider_net_cleanup_tx_ring,
+ (unsigned long)card);
netdev->irq = card->pdev->irq;
card->aneg_count = 0;
- init_timer(&card->aneg_timer);
- card->aneg_timer.function = spider_net_link_phy;
- card->aneg_timer.data = (unsigned long) card;
+ setup_timer(&card->aneg_timer, spider_net_link_phy,
+ (unsigned long)card);
netif_napi_add(netdev, &card->napi,
spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
--
2.7.4
^ permalink raw reply related
* [PATCH 21/64] drivers: net: sun: cassini: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/sun/cassini.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 382993c..a74d78f 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -5039,10 +5039,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
spin_lock_init(&cp->stat_lock[N_TX_RINGS]);
mutex_init(&cp->pm_mutex);
- init_timer(&cp->link_timer);
- cp->link_timer.function = cas_link_timer;
- cp->link_timer.data = (unsigned long) cp;
-
+ setup_timer(&cp->link_timer, cas_link_timer, (unsigned long)cp);
#if 1
/* Just in case the implementation of atomic operations
* change so that an explicit initialization is necessary.
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox