* [PATCH 29/64] drivers: net: smsc: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/smsc/epic100.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
index 6a0e1d4..2a97248 100644
--- a/drivers/net/ethernet/smsc/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -739,10 +739,8 @@ static int epic_open(struct net_device *dev)
/* Set the timer to switch to check for link beat and perhaps switch
to an alternate media type. */
- init_timer(&ep->timer);
+ setup_timer(&ep->timer, epic_timer, (unsigned long)dev);
ep->timer.expires = jiffies + 3*HZ;
- ep->timer.data = (unsigned long)dev;
- ep->timer.function = epic_timer; /* timer handler */
add_timer(&ep->timer);
return rc;
--
2.7.4
^ permalink raw reply related
* [PATCH 28/64] drivers: net: hippi: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/hippi/rrunner.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index 71ddadb..76cc140 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1229,10 +1229,8 @@ static int rr_open(struct net_device *dev)
/* Set the timer to switch to check for link beat and perhaps switch
to an alternate media type. */
- init_timer(&rrpriv->timer);
+ setup_timer(&rrpriv->timer, rr_timer, (unsigned long)dev);
rrpriv->timer.expires = RUN_AT(5*HZ); /* 5 sec. watchdog */
- rrpriv->timer.data = (unsigned long)dev;
- rrpriv->timer.function = rr_timer; /* timer handler */
add_timer(&rrpriv->timer);
netif_start_queue(dev);
--
2.7.4
^ permalink raw reply related
* [PATCH 27/64] drivers: net: atmel: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wireless/atmel/atmel.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/atmel/atmel.c b/drivers/net/wireless/atmel/atmel.c
index b68436b..e816d53 100644
--- a/drivers/net/wireless/atmel/atmel.c
+++ b/drivers/net/wireless/atmel/atmel.c
@@ -1579,11 +1579,10 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port,
priv->default_beacon_period = priv->beacon_period = 100;
priv->listen_interval = 1;
- init_timer(&priv->management_timer);
+ setup_timer(&priv->management_timer, atmel_management_timer,
+ (unsigned long)dev);
spin_lock_init(&priv->irqlock);
spin_lock_init(&priv->timerlock);
- priv->management_timer.function = atmel_management_timer;
- priv->management_timer.data = (unsigned long) dev;
dev->netdev_ops = &atmel_netdev_ops;
dev->wireless_handlers = &atmel_handler_def;
--
2.7.4
^ permalink raw reply related
* [PATCH 26/64] drivers: net: xen-netback: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/xen-netback/interface.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index ee8ed9da..dcfcb15 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -520,8 +520,7 @@ int xenvif_init_queue(struct xenvif_queue *queue)
queue->credit_bytes = queue->remaining_credit = ~0UL;
queue->credit_usec = 0UL;
- init_timer(&queue->credit_timeout);
- queue->credit_timeout.function = xenvif_tx_credit_callback;
+ setup_timer(&queue->credit_timeout, xenvif_tx_credit_callback, 0UL);
queue->credit_window_start = get_jiffies_64();
queue->rx_queue_max = XENVIF_RX_QUEUE_BYTES;
--
2.7.4
^ permalink raw reply related
* [PATCH 25/64] drivers: net: bnx2: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/bnx2.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index e3af1f3..b3055a7 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8462,10 +8462,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bnx2_set_default_link(bp);
bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
- init_timer(&bp->timer);
+ setup_timer(&bp->timer, bnx2_timer, (unsigned long)bp);
bp->timer.expires = RUN_AT(BNX2_TIMER_INTERVAL);
- bp->timer.data = (unsigned long) bp;
- bp->timer.function = bnx2_timer;
#ifdef BCM_CNIC
if (bnx2_shmem_rd(bp, BNX2_ISCSI_INITIATOR) & BNX2_ISCSI_INITIATOR_EN)
--
2.7.4
^ permalink raw reply related
* [PATCH 24/64] drivers: net: enic: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index d24ee1a..4a11baf 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2846,9 +2846,8 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Setup notification timer, HW reset task, and wq locks
*/
- init_timer(&enic->notify_timer);
- enic->notify_timer.function = enic_notify_timer;
- enic->notify_timer.data = (unsigned long)enic;
+ setup_timer(&enic->notify_timer, enic_notify_timer,
+ (unsigned long)enic);
enic_set_rx_coal_setting(enic);
INIT_WORK(&enic->reset, enic_reset);
--
2.7.4
^ permalink raw reply related
* [PATCH 23/64] drivers: net: winbond-840: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/dec/tulip/winbond-840.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index 32d7229..6f88d68 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -655,10 +655,8 @@ static int netdev_open(struct net_device *dev)
netdev_dbg(dev, "Done netdev_open()\n");
/* Set the timer to check for link beat. */
- init_timer(&np->timer);
+ setup_timer(&np->timer, netdev_timer, (unsigned long)dev);
np->timer.expires = jiffies + 1*HZ;
- np->timer.data = (unsigned long)dev;
- np->timer.function = netdev_timer; /* timer handler */
add_timer(&np->timer);
return 0;
out_err:
--
2.7.4
^ permalink raw reply related
* [PATCH 22/64] drivers: net: natsemi: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/natsemi/natsemi.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
index 18af2a2..dedeacd 100644
--- a/drivers/net/ethernet/natsemi/natsemi.c
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -1571,10 +1571,8 @@ static int netdev_open(struct net_device *dev)
dev->name, (int)readl(ioaddr + ChipCmd));
/* Set the timer to check for link beat. */
- init_timer(&np->timer);
+ setup_timer(&np->timer, netdev_timer, (unsigned long)dev);
np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ);
- np->timer.data = (unsigned long)dev;
- np->timer.function = netdev_timer; /* timer handler */
add_timer(&np->timer);
return 0;
--
2.7.4
^ permalink raw reply related
* [PATCH 21/64] drivers: net: sun: cassini: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/sun/cassini.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 382993c..a74d78f 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -5039,10 +5039,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
spin_lock_init(&cp->stat_lock[N_TX_RINGS]);
mutex_init(&cp->pm_mutex);
- init_timer(&cp->link_timer);
- cp->link_timer.function = cas_link_timer;
- cp->link_timer.data = (unsigned long) cp;
-
+ setup_timer(&cp->link_timer, cas_link_timer, (unsigned long)cp);
#if 1
/* Just in case the implementation of atomic operations
* change so that an explicit initialization is necessary.
--
2.7.4
^ permalink raw reply related
* [PATCH 20/64] drivers: net: spider_net: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/toshiba/spider_net.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index cec9e70..a913538 100644
--- a/drivers/net/ethernet/toshiba/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -2256,16 +2256,14 @@ spider_net_setup_netdev(struct spider_net_card *card)
pci_set_drvdata(card->pdev, netdev);
- init_timer(&card->tx_timer);
- card->tx_timer.function =
- (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
- card->tx_timer.data = (unsigned long) card;
+ setup_timer(&card->tx_timer,
+ (void(*)(unsigned long))spider_net_cleanup_tx_ring,
+ (unsigned long)card);
netdev->irq = card->pdev->irq;
card->aneg_count = 0;
- init_timer(&card->aneg_timer);
- card->aneg_timer.function = spider_net_link_phy;
- card->aneg_timer.data = (unsigned long) card;
+ setup_timer(&card->aneg_timer, spider_net_link_phy,
+ (unsigned long)card);
netif_napi_add(netdev, &card->napi,
spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
--
2.7.4
^ permalink raw reply related
* [PATCH 19/64] drivers: net: slip: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/slip/slip.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index 436dd78..eb8a189 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -763,12 +763,8 @@ static struct slip *sl_alloc(dev_t line)
sl->mode = SL_MODE_DEFAULT;
#ifdef CONFIG_SLIP_SMART
/* initialize timer_list struct */
- init_timer(&sl->keepalive_timer);
- sl->keepalive_timer.data = (unsigned long)sl;
- sl->keepalive_timer.function = sl_keepalive;
- init_timer(&sl->outfill_timer);
- sl->outfill_timer.data = (unsigned long)sl;
- sl->outfill_timer.function = sl_outfill;
+ setup_timer(&sl->keepalive_timer, sl_keepalive, (unsigned long)sl);
+ setup_timer(&sl->outfill_timer, sl_outfill, (unsigned long)sl);
#endif
slip_devs[i] = dev;
return sl;
--
2.7.4
^ permalink raw reply related
* [PATCH 18/64] drivers: net: cisco_hdlc: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/hdlc_cisco.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a408abc..c696d42 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -293,10 +293,8 @@ static void cisco_start(struct net_device *dev)
st->up = st->txseq = st->rxseq = 0;
spin_unlock_irqrestore(&st->lock, flags);
- init_timer(&st->timer);
+ setup_timer(&st->timer, cisco_timer, (unsigned long)dev);
st->timer.expires = jiffies + HZ; /* First poll after 1 s */
- st->timer.function = cisco_timer;
- st->timer.data = (unsigned long)dev;
add_timer(&st->timer);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 17/64] drivers: net: sdla: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/sdla.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 236c625..0cc4890 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -1617,10 +1617,8 @@ static void setup_sdla(struct net_device *dev)
flp->deassoc = sdla_deassoc;
flp->dlci_conf = sdla_dlci_conf;
- init_timer(&flp->timer);
+ setup_timer(&flp->timer, sdla_poll, (unsigned long)dev);
flp->timer.expires = 1;
- flp->timer.data = (unsigned long) dev;
- flp->timer.function = sdla_poll;
}
static struct net_device *sdla;
--
2.7.4
^ permalink raw reply related
* [PATCH 16/64] drivers: net: tg3: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/tg3.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 656e6af..d8d5f20 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -11087,9 +11087,7 @@ static void tg3_timer_init(struct tg3 *tp)
tp->asf_multiplier = (HZ / tp->timer_offset) *
TG3_FW_UPDATE_FREQ_SEC;
- init_timer(&tp->timer);
- tp->timer.data = (unsigned long) tp;
- tp->timer.function = tg3_timer;
+ setup_timer(&tp->timer, tg3_timer, (unsigned long)tp);
}
static void tg3_timer_start(struct tg3 *tp)
--
2.7.4
^ permalink raw reply related
* [PATCH 15/64] drivers: net: sundance: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/dlink/sundance.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c
index 2704bcf..6ca9e98 100644
--- a/drivers/net/ethernet/dlink/sundance.c
+++ b/drivers/net/ethernet/dlink/sundance.c
@@ -913,10 +913,8 @@ static int netdev_open(struct net_device *dev)
ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0));
/* Set the timer to check for link beat. */
- init_timer(&np->timer);
+ setup_timer(&np->timer, netdev_timer, (unsigned long)dev);
np->timer.expires = jiffies + 3*HZ;
- np->timer.data = (unsigned long)dev;
- np->timer.function = netdev_timer; /* timer handler */
add_timer(&np->timer);
/* Enable interrupts by setting the interrupt mask. */
--
2.7.4
^ permalink raw reply related
* [PATCH 14/64] drivers: net: ixgb: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/intel/ixgb/ixgb_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index 5a71319..1e6ec22 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -508,9 +508,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw);
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = ixgb_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
+ setup_timer(&adapter->watchdog_timer, ixgb_watchdog,
+ (unsigned long)adapter);
INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task);
--
2.7.4
^ permalink raw reply related
* [PATCH 13/64] drivers: net: ns83820: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/natsemi/ns83820.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
index 729095d..99d3c78 100644
--- a/drivers/net/ethernet/natsemi/ns83820.c
+++ b/drivers/net/ethernet/natsemi/ns83820.c
@@ -1652,9 +1652,7 @@ static int ns83820_open(struct net_device *ndev)
writel(0, dev->base + TXDP_HI);
writel(desc, dev->base + TXDP);
- init_timer(&dev->tx_watchdog);
- dev->tx_watchdog.data = (unsigned long)ndev;
- dev->tx_watchdog.function = ns83820_tx_watch;
+ setup_timer(&dev->tx_watchdog, ns83820_tx_watch, (unsigned long)ndev);
mod_timer(&dev->tx_watchdog, jiffies + 2*HZ);
netif_start_queue(ndev); /* FIXME: wait for phy to come up */
--
2.7.4
^ permalink raw reply related
* [PATCH 12/64] drivers: net: atp: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/realtek/atp.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c
index bed3468..bdc3833 100644
--- a/drivers/net/ethernet/realtek/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -438,10 +438,8 @@ static int net_open(struct net_device *dev)
hardware_init(dev);
- init_timer(&lp->timer);
+ setup_timer(&lp->timer, atp_timed_checker, (unsigned long)dev);
lp->timer.expires = jiffies + TIMED_CHECKER;
- lp->timer.data = (unsigned long)dev;
- lp->timer.function = atp_timed_checker; /* timer handler */
add_timer(&lp->timer);
netif_start_queue(dev);
--
2.7.4
^ permalink raw reply related
* [PATCH 11/64] drivers: net: rsi_91x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wireless/rsi/rsi_91x_hal.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index 070dfd6..7ad286d 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -411,9 +411,8 @@ static void bl_cmd_timeout(unsigned long priv)
static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout)
{
- init_timer(&adapter->bl_cmd_timer);
- adapter->bl_cmd_timer.data = (unsigned long)adapter;
- adapter->bl_cmd_timer.function = (void *)&bl_cmd_timeout;
+ setup_timer(&adapter->bl_cmd_timer, (void *)&bl_cmd_timeout,
+ (unsigned long)adapter);
adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies);
adapter->blcmd_timer_expired = false;
--
2.7.4
^ permalink raw reply related
* [PATCH 10/64] drivers: net: appletalk: cops: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/appletalk/cops.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 486e1e6..caf0428 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -424,9 +424,7 @@ static int cops_open(struct net_device *dev)
*/
if(lp->board==TANGENT) /* Poll 20 times per second */
{
- init_timer(&cops_timer);
- cops_timer.function = cops_poll;
- cops_timer.data = (unsigned long)dev;
+ setup_timer(&cops_timer, cops_poll, (unsigned long)dev);
cops_timer.expires = jiffies + HZ/20;
add_timer(&cops_timer);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 09/64] drivers: net: et131x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/agere/et131x.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c
index 54eff90..658e92f 100644
--- a/drivers/net/ethernet/agere/et131x.c
+++ b/drivers/net/ethernet/agere/et131x.c
@@ -3624,11 +3624,10 @@ static int et131x_open(struct net_device *netdev)
int result;
/* Start the timer to track NIC errors */
- init_timer(&adapter->error_timer);
+ setup_timer(&adapter->error_timer, et131x_error_timer_handler,
+ (unsigned long)adapter);
adapter->error_timer.expires = jiffies +
msecs_to_jiffies(TX_ERROR_PERIOD);
- adapter->error_timer.function = et131x_error_timer_handler;
- adapter->error_timer.data = (unsigned long)adapter;
add_timer(&adapter->error_timer);
result = request_irq(irq, et131x_isr,
--
2.7.4
^ permalink raw reply related
* [PATCH 07/64] drivers: net: declance: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/amd/declance.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 82cc813..9bdf81c 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -1246,9 +1246,9 @@ static int dec_lance_probe(struct device *bdev, const int type)
* can occur from interrupts (ex. IPv6). So we
* use a timer to try again later when necessary. -DaveM
*/
- init_timer(&lp->multicast_timer);
- lp->multicast_timer.data = (unsigned long) dev;
- lp->multicast_timer.function = lance_set_multicast_retry;
+ setup_timer(&lp->multicast_timer, lance_set_multicast_retry,
+ (unsigned long)dev);
+
ret = register_netdev(dev);
if (ret) {
--
2.7.4
^ permalink raw reply related
* [PATCH 05/64] drivers : net: niu: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/sun/niu.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 6a4e8e1..bde19b3 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -6123,10 +6123,8 @@ static int niu_open(struct net_device *dev)
err = niu_init_hw(np);
if (!err) {
- init_timer(&np->timer);
+ setup_timer(&np->timer, niu_timer, (unsigned long)np);
np->timer.expires = jiffies + HZ;
- np->timer.data = (unsigned long) np;
- np->timer.function = niu_timer;
err = niu_enable_interrupts(np, 1);
if (err)
--
2.7.4
^ permalink raw reply related
* [PATCH 04/64] drivers: net: brcm80211: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index aaed4ab..ab3f223 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3260,9 +3260,8 @@ static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg)
brcmf_cfg80211_escan_handler);
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
/* Init scan_timeout timer */
- init_timer(&cfg->escan_timeout);
- cfg->escan_timeout.data = (unsigned long) cfg;
- cfg->escan_timeout.function = brcmf_escan_timeout;
+ setup_timer(&cfg->escan_timeout, brcmf_escan_timeout,
+ (unsigned long)cfg);
INIT_WORK(&cfg->escan_timeout_work,
brcmf_cfg80211_escan_timeout_worker);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 03/64] drivers: net: pcnet32: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/amd/pcnet32.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 7f60d17..e461536 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1970,9 +1970,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
lp->options |= PCNET32_PORT_MII;
}
- init_timer(&lp->watchdog_timer);
- lp->watchdog_timer.data = (unsigned long)dev;
- lp->watchdog_timer.function = (void *)&pcnet32_watchdog;
+ setup_timer(&lp->watchdog_timer, (void *)&pcnet32_watchdog,
+ (unsigned long)dev);
/* The PCNET32-specific entries in the device structure. */
dev->netdev_ops = &pcnet32_netdev_ops;
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox