* [PATCH 39/64] drivers: net: sun: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/sun/sungem.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c
index fa607d0..b75ab8f 100644
--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -2910,9 +2910,7 @@ static int gem_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
gp->msg_enable = DEFAULT_MSG;
- init_timer(&gp->link_timer);
- gp->link_timer.function = gem_link_timer;
- gp->link_timer.data = (unsigned long) gp;
+ setup_timer(&gp->link_timer, gem_link_timer, (unsigned long)gp);
INIT_WORK(&gp->reset_task, gem_reset_task);
--
2.7.4
^ permalink raw reply related
* [PATCH 40/64] drivers: net: sis900: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/sis/sis900.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 40bd883..cb61247 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1065,10 +1065,8 @@ sis900_open(struct net_device *net_dev)
/* Set the timer to switch to check for link beat and perhaps switch
to an alternate media type. */
- init_timer(&sis_priv->timer);
+ setup_timer(&sis_priv->timer, sis900_timer, (unsigned long)net_dev);
sis_priv->timer.expires = jiffies + HZ;
- sis_priv->timer.data = (unsigned long)net_dev;
- sis_priv->timer.function = sis900_timer;
add_timer(&sis_priv->timer);
return 0;
--
2.7.4
^ permalink raw reply related
* [PATCH 41/64] drivers: net: packetengines: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/packetengines/yellowfin.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/packetengines/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c
index fa7770d..33c241f 100644
--- a/drivers/net/ethernet/packetengines/yellowfin.c
+++ b/drivers/net/ethernet/packetengines/yellowfin.c
@@ -632,10 +632,8 @@ static int yellowfin_open(struct net_device *dev)
}
/* Set the timer to check for link beat. */
- init_timer(&yp->timer);
+ setup_timer(&yp->timer, yellowfin_timer, (unsigned long)dev);
yp->timer.expires = jiffies + 3*HZ;
- yp->timer.data = (unsigned long)dev;
- yp->timer.function = yellowfin_timer; /* timer handler */
add_timer(&yp->timer);
out:
return rc;
--
2.7.4
^ permalink raw reply related
* [PATCH 42/64] drivers: net: mlx5: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/mellanox/mlx5/core/health.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
index 8aea0a0..a89a68c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
@@ -320,15 +320,13 @@ void mlx5_start_health_poll(struct mlx5_core_dev *dev)
{
struct mlx5_core_health *health = &dev->priv.health;
- init_timer(&health->timer);
+ setup_timer(&health->timer, poll_health, (unsigned long)dev);
health->sick = 0;
clear_bit(MLX5_DROP_NEW_HEALTH_WORK, &health->flags);
clear_bit(MLX5_DROP_NEW_RECOVERY_WORK, &health->flags);
health->health = &dev->iseg->health;
health->health_counter = &dev->iseg->health_counter;
- health->timer.data = (unsigned long)dev;
- health->timer.function = poll_health;
health->timer.expires = round_jiffies(jiffies + MLX5_HEALTH_POLL_INTERVAL);
add_timer(&health->timer);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 43/64] drivers: net: mlx4: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/mellanox/mlx4/catas.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/catas.c b/drivers/net/ethernet/mellanox/mlx4/catas.c
index 53daa6c..de0f9e5 100644
--- a/drivers/net/ethernet/mellanox/mlx4/catas.c
+++ b/drivers/net/ethernet/mellanox/mlx4/catas.c
@@ -277,7 +277,7 @@ void mlx4_start_catas_poll(struct mlx4_dev *dev)
phys_addr_t addr;
INIT_LIST_HEAD(&priv->catas_err.list);
- init_timer(&priv->catas_err.timer);
+ setup_timer(&priv->catas_err.timer, poll_catas, (unsigned long)dev);
priv->catas_err.map = NULL;
if (!mlx4_is_slave(dev)) {
@@ -293,8 +293,6 @@ void mlx4_start_catas_poll(struct mlx4_dev *dev)
}
}
- priv->catas_err.timer.data = (unsigned long) dev;
- priv->catas_err.timer.function = poll_catas;
priv->catas_err.timer.expires =
round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL);
add_timer(&priv->catas_err.timer);
--
2.7.4
^ permalink raw reply related
* [PATCH 45/64] drivers: net: fealnx: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/fealnx.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/fealnx.c b/drivers/net/ethernet/fealnx.c
index e92859d..c898231 100644
--- a/drivers/net/ethernet/fealnx.c
+++ b/drivers/net/ethernet/fealnx.c
@@ -909,17 +909,13 @@ static int netdev_open(struct net_device *dev)
printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
/* Set the timer to check for link beat. */
- init_timer(&np->timer);
+ setup_timer(&np->timer, netdev_timer, (unsigned long)dev);
np->timer.expires = RUN_AT(3 * HZ);
- np->timer.data = (unsigned long) dev;
- np->timer.function = netdev_timer;
/* timer handler */
add_timer(&np->timer);
- init_timer(&np->reset_timer);
- np->reset_timer.data = (unsigned long) dev;
- np->reset_timer.function = reset_timer;
+ setup_timer(&np->reset_timer, reset_timer, (unsigned long)dev);
np->reset_timer_armed = 0;
return rc;
}
--
2.7.4
^ permalink raw reply related
* [PATCH 46/64] drivers: net: dmfe: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/dec/tulip/dmfe.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 07e10a4..6585f73 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -596,10 +596,8 @@ static int dmfe_open(struct net_device *dev)
netif_wake_queue(dev);
/* set and active a timer process */
- init_timer(&db->timer);
+ setup_timer(&db->timer, dmfe_timer, (unsigned long)dev);
db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
- db->timer.data = (unsigned long)dev;
- db->timer.function = dmfe_timer;
add_timer(&db->timer);
return 0;
--
2.7.4
^ permalink raw reply related
* [PATCH 47/64] drivers: net: bnxt: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index aacec8b..c25f5b5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -7190,9 +7190,7 @@ static int bnxt_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->stats_coal_ticks = BNXT_DEF_STATS_COAL_TICKS;
- init_timer(&bp->timer);
- bp->timer.data = (unsigned long)bp;
- bp->timer.function = bnxt_timer;
+ setup_timer(&bp->timer, bnxt_timer, (unsigned long)bp);
bp->current_interval = BNXT_TIMER_INTERVAL;
clear_bit(BNXT_STATE_OPEN, &bp->state);
--
2.7.4
^ permalink raw reply related
* [PATCH 49/64] drivers: net: adi: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/adi/bfin_mac.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index a251de8..0658cde 100644
--- a/drivers/net/ethernet/adi/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
@@ -1650,9 +1650,8 @@ static int bfin_mac_probe(struct platform_device *pdev)
ndev->netdev_ops = &bfin_mac_netdev_ops;
ndev->ethtool_ops = &bfin_mac_ethtool_ops;
- init_timer(&lp->tx_reclaim_timer);
- lp->tx_reclaim_timer.data = (unsigned long)lp;
- lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
+ setup_timer(&lp->tx_reclaim_timer, tx_reclaim_skb_timeout,
+ (unsigned long)lp);
lp->flags = 0;
netif_napi_add(ndev, &lp->napi, bfin_mac_poll, CONFIG_BFIN_RX_DESC_NUM);
--
2.7.4
^ permalink raw reply related
* [PATCH 50/64] drivers: net: can: sja1000: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/can/sja1000/peak_pcmcia.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index dd56133..4b8758e 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -692,9 +692,7 @@ static int pcan_probe(struct pcmcia_device *pdev)
}
/* init the timer which controls the leds */
- init_timer(&card->led_timer);
- card->led_timer.function = pcan_led_timer;
- card->led_timer.data = (unsigned long)card;
+ setup_timer(&card->led_timer, pcan_led_timer, (unsigned long)card);
/* request the given irq */
err = request_irq(pdev->irq, &pcan_isr, IRQF_SHARED, PCC_NAME, card);
--
2.7.4
^ permalink raw reply related
* [PATCH 51/64] drivers: net: caif: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/caif/caif_hsi.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
index 438966b..fed75e7 100644
--- a/drivers/net/caif/caif_hsi.c
+++ b/drivers/net/caif/caif_hsi.c
@@ -1211,17 +1211,14 @@ static int cfhsi_open(struct net_device *ndev)
init_waitqueue_head(&cfhsi->flush_fifo_wait);
/* Setup the inactivity timer. */
- init_timer(&cfhsi->inactivity_timer);
- cfhsi->inactivity_timer.data = (unsigned long)cfhsi;
- cfhsi->inactivity_timer.function = cfhsi_inactivity_tout;
+ setup_timer(&cfhsi->inactivity_timer, cfhsi_inactivity_tout,
+ (unsigned long)cfhsi);
/* Setup the slowpath RX timer. */
- init_timer(&cfhsi->rx_slowpath_timer);
- cfhsi->rx_slowpath_timer.data = (unsigned long)cfhsi;
- cfhsi->rx_slowpath_timer.function = cfhsi_rx_slowpath;
+ setup_timer(&cfhsi->rx_slowpath_timer, cfhsi_rx_slowpath,
+ (unsigned long)cfhsi);
/* Setup the aggregation timer. */
- init_timer(&cfhsi->aggregation_timer);
- cfhsi->aggregation_timer.data = (unsigned long)cfhsi;
- cfhsi->aggregation_timer.function = cfhsi_aggregation_tout;
+ setup_timer(&cfhsi->aggregation_timer, cfhsi_aggregation_tout,
+ (unsigned long)cfhsi);
/* Activate HSI interface. */
res = cfhsi->ops->cfhsi_up(cfhsi->ops);
--
2.7.4
^ permalink raw reply related
* [PATCH 52/64] drivers: net: appletalk: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/appletalk/ltpc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index ac755d2..e4aa374 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1165,9 +1165,7 @@ struct net_device * __init ltpc_probe(void)
dev->irq = 0;
/* polled mode -- 20 times per second */
/* this is really, really slow... should it poll more often? */
- init_timer(<pc_timer);
- ltpc_timer.function=ltpc_poll;
- ltpc_timer.data = (unsigned long) dev;
+ setup_timer(<pc_timer, ltpc_poll, (unsigned long)dev);
ltpc_timer.expires = jiffies + HZ/20;
add_timer(<pc_timer);
--
2.7.4
^ permalink raw reply related
* [PATCH 53/64] drivers: net: dscc: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/dscc4.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index a043fb1..64f1764 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -1127,10 +1127,8 @@ static int dscc4_open(struct net_device *dev)
done:
netif_start_queue(dev);
- init_timer(&dpriv->timer);
+ setup_timer(&dpriv->timer, dscc4_timer, (unsigned long)dev);
dpriv->timer.expires = jiffies + 10*HZ;
- dpriv->timer.data = (unsigned long)dev;
- dpriv->timer.function = dscc4_timer;
add_timer(&dpriv->timer);
netif_carrier_on(dev);
--
2.7.4
^ permalink raw reply related
* [PATCH 54/64] drivers: net: hdlc_ppp: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/hdlc_ppp.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 0d2e00e..c7721c7 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -610,9 +610,7 @@ static void ppp_start(struct net_device *dev)
for (i = 0; i < IDX_COUNT; i++) {
struct proto *proto = &ppp->protos[i];
proto->dev = dev;
- init_timer(&proto->timer);
- proto->timer.function = ppp_timer;
- proto->timer.data = (unsigned long)proto;
+ setup_timer(&proto->timer, ppp_timer, (unsigned long)proto);
proto->state = CLOSED;
}
ppp->protos[IDX_LCP].pid = PID_LCP;
--
2.7.4
^ permalink raw reply related
* [PATCH 55/64] drivers: net: hamradio: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/hamradio/6pack.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 021a8ec..97fe8df 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -623,9 +623,7 @@ static int sixpack_open(struct tty_struct *tty)
netif_start_queue(dev);
- init_timer(&sp->tx_t);
- sp->tx_t.function = sp_xmit_on_air;
- sp->tx_t.data = (unsigned long) sp;
+ setup_timer(&sp->tx_t, sp_xmit_on_air, (unsigned long)sp);
init_timer(&sp->resync_t);
--
2.7.4
^ permalink raw reply related
* [PATCH 56/64] drivers: net: cpsw_ale: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/ti/cpsw_ale.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index ddd43e0..cd1185e 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -859,9 +859,7 @@ void cpsw_ale_start(struct cpsw_ale *ale)
cpsw_ale_control_set(ale, 0, ALE_ENABLE, 1);
cpsw_ale_control_set(ale, 0, ALE_CLEAR, 1);
- init_timer(&ale->timer);
- ale->timer.data = (unsigned long)ale;
- ale->timer.function = cpsw_ale_timer;
+ setup_timer(&ale->timer, cpsw_ale_timer, (unsigned long)ale);
if (ale->ageout) {
ale->timer.expires = jiffies + ale->ageout;
add_timer(&ale->timer);
--
2.7.4
^ permalink raw reply related
* [PATCH 57/64] drivers: net: stmmac: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1763e48..f41661a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2217,10 +2217,8 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
{
priv->tx_coal_frames = STMMAC_TX_FRAMES;
priv->tx_coal_timer = STMMAC_COAL_TX_TIMER;
- init_timer(&priv->txtimer);
+ setup_timer(&priv->txtimer, stmmac_tx_timer, (unsigned long)priv);
priv->txtimer.expires = STMMAC_COAL_TIMER(priv->tx_coal_timer);
- priv->txtimer.data = (unsigned long)priv;
- priv->txtimer.function = stmmac_tx_timer;
add_timer(&priv->txtimer);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 58/64] drivers: net: packetengines: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/packetengines/hamachi.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/packetengines/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c
index 482b85e..77bc7cc 100644
--- a/drivers/net/ethernet/packetengines/hamachi.c
+++ b/drivers/net/ethernet/packetengines/hamachi.c
@@ -979,10 +979,8 @@ static int hamachi_open(struct net_device *dev)
dev->name, readw(ioaddr + RxStatus), readw(ioaddr + TxStatus));
}
/* Set the timer to check for link beat. */
- init_timer(&hmp->timer);
+ setup_timer(&hmp->timer, hamachi_timer, (unsigned long)dev);
hmp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
- hmp->timer.data = (unsigned long)dev;
- hmp->timer.function = hamachi_timer; /* timer handler */
add_timer(&hmp->timer);
return 0;
--
2.7.4
^ permalink raw reply related
* [PATCH 59/64] drivers: net: i40evf: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1825d95..c243f9d 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2686,9 +2686,8 @@ static void i40evf_init_task(struct work_struct *work)
ether_addr_copy(netdev->perm_addr, adapter->hw.mac.addr);
}
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = &i40evf_watchdog_timer;
- adapter->watchdog_timer.data = (unsigned long)adapter;
+ setup_timer(&adapter->watchdog_timer, &i40evf_watchdog_timer,
+ (unsigned long)adapter);
mod_timer(&adapter->watchdog_timer, jiffies + 1);
adapter->tx_desc_count = I40EVF_DEFAULT_TXD;
--
2.7.4
^ permalink raw reply related
* [PATCH 60/64] drivers: net: uli526x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/dec/tulip/uli526x.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index 7fc248e..5fbbc0c 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -491,10 +491,8 @@ static int uli526x_open(struct net_device *dev)
netif_wake_queue(dev);
/* set and active a timer process */
- init_timer(&db->timer);
+ setup_timer(&db->timer, uli526x_timer, (unsigned long)dev);
db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
- db->timer.data = (unsigned long)dev;
- db->timer.function = uli526x_timer;
add_timer(&db->timer);
return 0;
--
2.7.4
^ permalink raw reply related
* [PATCH 61/64] drivers: net: enic: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/cisco/enic/enic_clsf.h | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_clsf.h b/drivers/net/ethernet/cisco/enic/enic_clsf.h
index 6aa9f89..4bfbf25 100644
--- a/drivers/net/ethernet/cisco/enic/enic_clsf.h
+++ b/drivers/net/ethernet/cisco/enic/enic_clsf.h
@@ -19,9 +19,8 @@ void enic_flow_may_expire(unsigned long data);
static inline void enic_rfs_timer_start(struct enic *enic)
{
- init_timer(&enic->rfs_h.rfs_may_expire);
- enic->rfs_h.rfs_may_expire.function = enic_flow_may_expire;
- enic->rfs_h.rfs_may_expire.data = (unsigned long)enic;
+ setup_timer(&enic->rfs_h.rfs_may_expire, enic_flow_may_expire,
+ (unsigned long)enic);
mod_timer(&enic->rfs_h.rfs_may_expire, jiffies + HZ/4);
}
--
2.7.4
^ permalink raw reply related
* [PATCH 62/64] drivers: net: cxgb: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/chelsio/cxgb/sge.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb/sge.c b/drivers/net/ethernet/chelsio/cxgb/sge.c
index 0f13a7f..75e4399 100644
--- a/drivers/net/ethernet/chelsio/cxgb/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb/sge.c
@@ -2075,9 +2075,8 @@ struct sge *t1_sge_create(struct adapter *adapter, struct sge_params *p)
goto nomem_port;
}
- init_timer(&sge->tx_reclaim_timer);
- sge->tx_reclaim_timer.data = (unsigned long)sge;
- sge->tx_reclaim_timer.function = sge_tx_reclaim_cb;
+ setup_timer(&sge->tx_reclaim_timer, sge_tx_reclaim_cb,
+ (unsigned long)sge);
if (is_T2(sge->adapter)) {
init_timer(&sge->espibug_timer);
--
2.7.4
^ permalink raw reply related
* [PATCH 63/64] drivers: net: bnx2x: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c12b4d3..54d15713 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12414,10 +12414,8 @@ static int bnx2x_init_bp(struct bnx2x *bp)
bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
- init_timer(&bp->timer);
+ setup_timer(&bp->timer, bnx2x_timer, (unsigned long)bp);
bp->timer.expires = jiffies + bp->current_interval;
- bp->timer.data = (unsigned long) bp;
- bp->timer.function = bnx2x_timer;
if (SHMEM2_HAS(bp, dcbx_lldp_params_offset) &&
SHMEM2_HAS(bp, dcbx_lldp_dcbx_stat_offset) &&
--
2.7.4
^ permalink raw reply related
* [PATCH 64/64] drivers: net: lmc: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:05 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/wan/lmc/lmc_main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 4698450..ae69d65 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -1084,10 +1084,8 @@ static int lmc_open(struct net_device *dev)
* Setup a timer for the watchdog on probe, and start it running.
* Since lmc_ok == 0, it will be a NOP for now.
*/
- init_timer (&sc->timer);
+ setup_timer(&sc->timer, lmc_watchdog, (unsigned long)dev);
sc->timer.expires = jiffies + HZ;
- sc->timer.data = (unsigned long) dev;
- sc->timer.function = lmc_watchdog;
add_timer (&sc->timer);
lmc_trace(dev, "lmc_open out");
--
2.7.4
^ permalink raw reply related
* [PATCH 06/64] drivers: net: bcm63xx: use setup_timer() helper.
From: Allen Pais @ 2017-09-21 17:04 UTC (permalink / raw)
To: netdev
Cc: linux-kernel, m.grzeschik, dmitry.tarnyagin, wg, mkl, mark.einon,
linux, pcnet32, f.fainelli, bcm-kernel-feedback-list, venza, ajk,
jes, romieu, khc, simon, davem, linux-can, adi-buildroot-devel,
Allen Pais
In-Reply-To: <1506013525-29291-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 4f3845a..f8bbbbf 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1857,9 +1857,8 @@ static int bcm_enet_probe(struct platform_device *pdev)
spin_lock_init(&priv->rx_lock);
/* init rx timeout (used for oom) */
- init_timer(&priv->rx_timeout);
- priv->rx_timeout.function = bcm_enet_refill_rx_timer;
- priv->rx_timeout.data = (unsigned long)dev;
+ setup_timer(&priv->rx_timeout, bcm_enet_refill_rx_timer,
+ (unsigned long)dev);
/* init the mib update lock&work */
mutex_init(&priv->mib_update_lock);
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox