* [PATCH net] tuntap: fix use after free during release
From: Jason Wang @ 2018-05-16 12:39 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: xiyou.wangcong, avagin, mst, Jason Wang
After commit b196d88aba8a ("tun: fix use after free for ptr_ring") we
need clean up tx ring during release(). But unfortunately, it tries to
do the cleanup blindly after socket were destroyed which will lead
another use-after-free. Fix this by doing the cleanup before dropping
the last reference of the socket in __tun_detach().
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Fixes: b196d88aba8a ("tun: fix use after free for ptr_ring")
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/net/tun.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 9fbbb32..d45ac37 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -729,6 +729,7 @@ static void __tun_detach(struct tun_file *tfile, bool clean)
}
if (tun)
xdp_rxq_info_unreg(&tfile->xdp_rxq);
+ ptr_ring_cleanup(&tfile->tx_ring, tun_ptr_free);
sock_put(&tfile->sk);
}
}
@@ -3245,7 +3246,6 @@ static int tun_chr_close(struct inode *inode, struct file *file)
struct tun_file *tfile = file->private_data;
tun_detach(tfile, true);
- ptr_ring_cleanup(&tfile->tx_ring, tun_ptr_free);
return 0;
}
--
2.7.4
^ permalink raw reply related
* Re: [PATCH 12/14] net: sched: retry action check-insert on concurrent modification
From: Vlad Buslov @ 2018-05-16 12:43 UTC (permalink / raw)
To: Jiri Pirko
Cc: netdev, davem, jhs, xiyou.wangcong, pablo, kadlec, fw, ast,
daniel, edumazet, keescook, linux-kernel, netfilter-devel,
coreteam, kliteyn
In-Reply-To: <20180516122600.GM1972@nanopsycho>
On Wed 16 May 2018 at 12:26, Jiri Pirko <jiri@resnulli.us> wrote:
> Wed, May 16, 2018 at 01:55:06PM CEST, vladbu@mellanox.com wrote:
>>
>>On Wed 16 May 2018 at 09:59, Jiri Pirko <jiri@resnulli.us> wrote:
>>> Mon, May 14, 2018 at 04:27:13PM CEST, vladbu@mellanox.com wrote:
>>>>Retry check-insert sequence in action init functions if action with same
>>>>index was inserted concurrently.
>>>>
>>>>Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
>>>>---
>>>> net/sched/act_bpf.c | 8 +++++++-
>>>> net/sched/act_connmark.c | 8 +++++++-
>>>> net/sched/act_csum.c | 8 +++++++-
>>>> net/sched/act_gact.c | 8 +++++++-
>>>> net/sched/act_ife.c | 8 +++++++-
>>>> net/sched/act_ipt.c | 8 +++++++-
>>>> net/sched/act_mirred.c | 8 +++++++-
>>>> net/sched/act_nat.c | 8 +++++++-
>>>> net/sched/act_pedit.c | 8 +++++++-
>>>> net/sched/act_police.c | 9 ++++++++-
>>>> net/sched/act_sample.c | 8 +++++++-
>>>> net/sched/act_simple.c | 9 ++++++++-
>>>> net/sched/act_skbedit.c | 8 +++++++-
>>>> net/sched/act_skbmod.c | 8 +++++++-
>>>> net/sched/act_tunnel_key.c | 9 ++++++++-
>>>> net/sched/act_vlan.c | 9 ++++++++-
>>>> 16 files changed, 116 insertions(+), 16 deletions(-)
>>>>
>>>>diff --git a/net/sched/act_bpf.c b/net/sched/act_bpf.c
>>>>index 5554bf7..7e20fdc 100644
>>>>--- a/net/sched/act_bpf.c
>>>>+++ b/net/sched/act_bpf.c
>>>>@@ -299,10 +299,16 @@ static int tcf_bpf_init(struct net *net, struct nlattr *nla,
>>>>
>>>> parm = nla_data(tb[TCA_ACT_BPF_PARMS]);
>>>>
>>>>+replay:
>>>> if (!tcf_idr_check(tn, parm->index, act, bind)) {
>>>> ret = tcf_idr_create(tn, parm->index, est, act,
>>>> &act_bpf_ops, bind, true);
>>>>- if (ret < 0)
>>>>+ /* Action with specified index was created concurrently.
>>>>+ * Check again.
>>>>+ */
>>>>+ if (parm->index && ret == -ENOSPC)
>>>>+ goto replay;
>>>>+ else if (ret)
>>>
>>> Hmm, looks like you are doing the same/very similar thing in every act
>>> code. I think it would make sense to introduce a helper function for
>>> this purpose.
>>
>>This code uses goto so it can't be easily refactored into standalone
>>function. Could you specify which part of this code you suggest to
>>extract?
>
> Hmm, looking at the code, I think that what would help is to have a
> helper that would atomically check if index exists and if not, it would
> allocate one. Something like:
>
>
> int tcf_idr_check_alloc(struct tc_action_net *tn, u32 *index,
> struct tc_action **a, int bind)
> {
> struct tcf_idrinfo *idrinfo = tn->idrinfo;
> struct tc_action *p;
> int err;
>
> spin_lock(&idrinfo->lock);
> if (*index) {
> p = idr_find(&idrinfo->action_idr, *index);
> if (p) {
> if (bind)
> p->tcfa_bindcnt++;
> p->tcfa_refcnt++;
> *a = p;
> err = 0;
> } else {
> *a = NULL;
> err = idr_alloc_u32(idr, NULL, index,
> *index, GFP_ATOMIC);
> }
> } else {
> *index = 1;
> *a = NULL;
> err = idr_alloc_u32(idr, NULL, index, UINT_MAX, GFP_ATOMIC);
> }
> spin_unlock(&idrinfo->lock);
> return err;
> }
>
> The act code would just check if "a" is NULL and if so, it would call
> tcf_idr_create() with allocated index as arg.
What about multiple actions that have arbitrary code between initial
check and idr allocation that is currently inside tcf_idr_create()?
>
>
>>
>>>
>>> [...]
>>
^ permalink raw reply
* Re: [PATCH 1/2] Convert target drivers to use sbitmap
From: kbuild test robot @ 2018-05-16 12:47 UTC (permalink / raw)
To: Matthew Wilcox
Cc: kbuild-all, linux-kernel, linux-scsi, target-devel,
linux1394-devel, linux-usb, kvm, virtualization, netdev,
Juergen Gross, qla2xxx-upstream, Kent Overstreet, Jens Axboe,
Matthew Wilcox
In-Reply-To: <20180515160043.27044-2-willy@infradead.org>
Hi Matthew,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v4.17-rc5 next-20180516]
[cannot apply to target/master]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Matthew-Wilcox/Use-sbitmap-instead-of-percpu_ida/20180516-143658
reproduce:
# apt-get install sparse
make ARCH=x86_64 allmodconfig
make C=1 CF=-D__CHECK_ENDIAN__
sparse warnings: (new ones prefixed by >>)
>> drivers/target/iscsi/iscsi_target_util.c:150:5: sparse: symbol 'iscsit_wait_for_tag' was not declared. Should it be static?
drivers/target/iscsi/iscsi_target_util.c:1174:31: sparse: expression using sizeof(void)
drivers/target/iscsi/iscsi_target_util.c:1174:31: sparse: expression using sizeof(void)
Please review and possibly fold the followup patch.
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
^ permalink raw reply
* [RFC PATCH] iscsit_wait_for_tag() can be static
From: kbuild test robot @ 2018-05-16 12:47 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Juergen Gross, Jens Axboe, kvm, linux-scsi, Matthew Wilcox,
netdev, linux-usb, linux-kernel, virtualization, target-devel,
kbuild-all, qla2xxx-upstream, linux1394-devel, Kent Overstreet
In-Reply-To: <20180515160043.27044-2-willy@infradead.org>
Fixes: 5aff7a710f13 ("Convert target drivers to use sbitmap")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---
iscsi_target_util.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index 28bcffa..e147aef 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -147,7 +147,7 @@ void iscsit_free_r2ts_from_list(struct iscsi_cmd *cmd)
spin_unlock_bh(&cmd->r2t_lock);
}
-int iscsit_wait_for_tag(struct se_session *se_sess, int state, int *cpup)
+static int iscsit_wait_for_tag(struct se_session *se_sess, int state, int *cpup)
{
int tag = -1;
DEFINE_WAIT(wait);
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
^ permalink raw reply related
* Re: i.MX6S/DL and QCA8334 switch using DSA driver - CPU port not working
From: Michal Vokáč @ 2018-05-16 12:50 UTC (permalink / raw)
To: Florian Fainelli, Andrew Lunn; +Cc: netdev, Vivien Didelot
In-Reply-To: <21fc20c7-77d2-cba0-8f58-6bacb41f0970@gmail.com>
On 15.5.2018 18:17, Florian Fainelli wrote:
>>> I would like to have confirmed that I understand it correctly and that
>>> the problem is really in the driver not handling fixed-link.
>>
>> I would actually skip fixed-link, if you don't need it. Just hardwire
>> the CPU port, like the Marvell driver does:
>>
>> https://elixir.bootlin.com/linux/latest/source/drivers/net/dsa/mv88e6xxx/chip.c#L1780
>>
>> I would do it here:
>>
>> https://elixir.bootlin.com/linux/latest/source/drivers/net/dsa/qca8k.c#L518
Thanks for the references, I will look there.
>
> Agreed with Andrew here, though if you can implement fixed-link, this
> should be more future proof.
I do not actually need fixed-link but I agree with Florian that it is much
better to have that option. I see it a as way to override defaults that
do not work for the user. That is what I was hoping for but it did not work.
So as the fixed-link subnode is optional we still should force some sensible
defaults if it is not used. Same as Marvell drives does. Can I say that we
agreed that the current CPU port setting is not correct and the fastest link
speed and duplex supported by the chip should be set as a default?
> As far as people using this driver, John submitted it, but we have not
> see many fixes/enhancements, so I am not clear who is actually using it
> these days... glad you are though!
Thanks.
To the compatibility of the driver with the QCA8334 that I use. I am not sure
what should be the correct way to deal with that. For example Marvell binding
uses only two compatible strings for a large range of chips in one family.
While Broadcom has one compatible string for each chip. As I mentioned earlier
in this thread the QCA8334 switch has four ports while the already supported
QCA8337 has seven ports. That is the only difference. Register address space
is the same.
Should I:
- add a new compatible string "qualcomm,qca8334" and update the docs,
- or just update the documentation and describe the compatibility?
As I need to update the docs I understand it should go as a separate patch.
Is it enough to CC devicetree list with the whole series? Any other
list/maintainer?
Thank you for your time,
Michal
^ permalink raw reply
* [PATCH v2 net-next 00/12] net: stmmac: Clean-up and tune-up
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
This targets to uniformize the handling of the different GMAC versions in
stmmac_main.c file and also tune-up the HW.
Currently there are some if/else conditions in the main source file which
calls different callbacks depending on the ID of GMAC.
With the introducion of a generic HW interface handling which automatically
selects the GMAC callbacks to be used, it is now unpleasant to see if
conditions in the main code because this should be completely agnostic of the
GMAC version.
This series removes most of these conditions. There are some if conditions
that remain untouched but the callbacks handling are now uniformized.
Tested in GMAC5, hope I didn't break any previous versions.
David raised some rightfull constrains about the use of indirect callbacks in
the code. I did iperf tests with and without patches 3-12 and the performance
remained equal. I guess for 1Gb/s and because my setup has a powerfull
processor these patches don't affect the performance.
Perhaps someone using a SoC with a slow CPU could test this?
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Jose Abreu (12):
net: stmmac: Enable OSP for GMAC4
net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmit
net: stmmac: Let descriptor code set skbuff address
net: stmmac: Let descriptor code clear the descriptor
net: stmmac: Uniformize the use of dma_{rx/tx}_mode callbacks
net: stmmac: Remove uneeded checks for GMAC version
net: stmmac: Move PTP and MMC base address calculation to hwif.c
net: stmmac: Uniformize the use of dma_init_* callbacks
net: stmmac: Remove uneeded check for GMAC version in stmmac_xmit
net: stmmac: Uniformize set_rx_owner()
net: stmmac: Let descriptor code get skbuff address
net: stmmac: Remove if condition by taking advantage of hwif return
code
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 57 +++---
.../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 92 ++++++----
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 35 +++--
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 34 +++-
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 7 +-
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h | 1 -
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 20 ++-
drivers/net/ethernet/stmicro/stmmac/hwif.c | 34 ++++
drivers/net/ethernet/stmicro/stmmac/hwif.h | 27 ++-
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 20 ++-
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 198 +++++++-------------
12 files changed, 304 insertions(+), 222 deletions(-)
^ permalink raw reply
* [PATCH v2 net-next 01/12] net: stmmac: Enable OSP for GMAC4
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
This enables OSP (Operate on Second Packet) for GMAC4. The feature
allows DMA to fetch second descriptor while its still processing the
first one.
Running iperf, the performance gain is +/- 38%.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 117c3a5..9aab5b3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -94,6 +94,10 @@ static void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+
+ /* Enable OSP to get best performance */
+ value |= DMA_CONTROL_OSP;
+
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 02/12] net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmit
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
This is cutting down performance. Once the timer is armed it should run
after the time expires for the first packet sent and not the last one.
After this change, running iperf, the performance gain is +/- 24%.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 42fc76e..4d425b1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -105,6 +105,7 @@ struct stmmac_priv {
u32 tx_count_frames;
u32 tx_coal_frames;
u32 tx_coal_timer;
+ bool tx_timer_armed;
int tx_coalesce;
int hwts_tx_en;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d9dbe13..789bc22 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3158,13 +3158,16 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
* element in case of no SG.
*/
priv->tx_count_frames += nfrags + 1;
- if (likely(priv->tx_coal_frames > priv->tx_count_frames)) {
+ if (likely(priv->tx_coal_frames > priv->tx_count_frames) &&
+ !priv->tx_timer_armed) {
mod_timer(&priv->txtimer,
STMMAC_COAL_TIMER(priv->tx_coal_timer));
+ priv->tx_timer_armed = true;
} else {
priv->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
+ priv->tx_timer_armed = false;
}
skb_tx_timestamp(skb);
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 03/12] net: stmmac: Let descriptor code set skbuff address
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
Stop using if conditions depending on the GMAC version for setting the
the descriptor skbuff address and use instead a helper implemented in
the descriptor files.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 7 +++++
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 6 ++++
drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 +++
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 6 ++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 25 ++++---------------
5 files changed, 29 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 65ed896..f67caa1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -424,6 +424,12 @@ static void dwmac4_set_mss_ctxt(struct dma_desc *p, unsigned int mss)
p->des3 = cpu_to_le32(TDES3_CONTEXT_TYPE | TDES3_CTXT_TCMSSV);
}
+static void dwmac4_set_addr(struct dma_desc *p, dma_addr_t addr)
+{
+ p->des0 = cpu_to_le32(addr);
+ p->des1 = 0;
+}
+
const struct stmmac_desc_ops dwmac4_desc_ops = {
.tx_status = dwmac4_wrback_get_tx_status,
.rx_status = dwmac4_wrback_get_rx_status,
@@ -445,6 +451,7 @@ static void dwmac4_set_mss_ctxt(struct dma_desc *p, unsigned int mss)
.init_tx_desc = dwmac4_rd_init_tx_desc,
.display_ring = dwmac4_display_ring,
.set_mss = dwmac4_set_mss_ctxt,
+ .set_addr = dwmac4_set_addr,
};
const struct stmmac_mode_ops dwmac4_ring_mode_ops = { };
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 3bfb3f5..02749e4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -437,6 +437,11 @@ static void enh_desc_display_ring(void *head, unsigned int size, bool rx)
pr_info("\n");
}
+static void enh_desc_set_addr(struct dma_desc *p, dma_addr_t addr)
+{
+ p->des2 = cpu_to_le32(addr);
+}
+
const struct stmmac_desc_ops enh_desc_ops = {
.tx_status = enh_desc_get_tx_status,
.rx_status = enh_desc_get_rx_status,
@@ -457,4 +462,5 @@ static void enh_desc_display_ring(void *head, unsigned int size, bool rx)
.get_timestamp = enh_desc_get_timestamp,
.get_rx_timestamp_status = enh_desc_get_rx_timestamp_status,
.display_ring = enh_desc_display_ring,
+ .set_addr = enh_desc_set_addr,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index b7539a1..d66d194 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -79,6 +79,8 @@ struct stmmac_desc_ops {
void (*display_ring)(void *head, unsigned int size, bool rx);
/* set MSS via context descriptor */
void (*set_mss)(struct dma_desc *p, unsigned int mss);
+ /* set descriptor skbuff address */
+ void (*set_addr)(struct dma_desc *p, dma_addr_t addr);
};
#define stmmac_init_rx_desc(__priv, __args...) \
@@ -123,6 +125,8 @@ struct stmmac_desc_ops {
stmmac_do_void_callback(__priv, desc, display_ring, __args)
#define stmmac_set_mss(__priv, __args...) \
stmmac_do_void_callback(__priv, desc, set_mss, __args)
+#define stmmac_set_desc_addr(__priv, __args...) \
+ stmmac_do_void_callback(__priv, desc, set_addr, __args)
struct stmmac_dma_cfg;
struct dma_features;
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index 7b1d901..6cf2c7c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -297,6 +297,11 @@ static void ndesc_display_ring(void *head, unsigned int size, bool rx)
pr_info("\n");
}
+static void ndesc_set_addr(struct dma_desc *p, dma_addr_t addr)
+{
+ p->des2 = cpu_to_le32(addr);
+}
+
const struct stmmac_desc_ops ndesc_ops = {
.tx_status = ndesc_get_tx_status,
.rx_status = ndesc_get_rx_status,
@@ -316,4 +321,5 @@ static void ndesc_display_ring(void *head, unsigned int size, bool rx)
.get_timestamp = ndesc_get_timestamp,
.get_rx_timestamp_status = ndesc_get_rx_timestamp_status,
.display_ring = ndesc_display_ring,
+ .set_addr = ndesc_set_addr,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 789bc22..3f559d7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1156,10 +1156,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
return -EINVAL;
}
- if (priv->synopsys_id >= DWMAC_CORE_4_00)
- p->des0 = cpu_to_le32(rx_q->rx_skbuff_dma[i]);
- else
- p->des2 = cpu_to_le32(rx_q->rx_skbuff_dma[i]);
+ stmmac_set_desc_addr(priv, p, rx_q->rx_skbuff_dma[i]);
if (priv->dma_buf_sz == BUF_SIZE_16KiB)
stmmac_init_desc3(priv, p);
@@ -3100,10 +3097,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
goto dma_map_err; /* should reuse desc w/o issues */
tx_q->tx_skbuff_dma[entry].buf = des;
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- desc->des0 = cpu_to_le32(des);
- else
- desc->des2 = cpu_to_le32(des);
+
+ stmmac_set_desc_addr(priv, desc, des);
tx_q->tx_skbuff_dma[entry].map_as_page = true;
tx_q->tx_skbuff_dma[entry].len = len;
@@ -3185,10 +3180,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
goto dma_map_err;
tx_q->tx_skbuff_dma[first_entry].buf = des;
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- first->des0 = cpu_to_le32(des);
- else
- first->des2 = cpu_to_le32(des);
+
+ stmmac_set_desc_addr(priv, first, des);
tx_q->tx_skbuff_dma[first_entry].len = nopaged_len;
tx_q->tx_skbuff_dma[first_entry].last_segment = last_segment;
@@ -3302,13 +3295,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
break;
}
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00)) {
- p->des0 = cpu_to_le32(rx_q->rx_skbuff_dma[entry]);
- p->des1 = 0;
- } else {
- p->des2 = cpu_to_le32(rx_q->rx_skbuff_dma[entry]);
- }
-
+ stmmac_set_desc_addr(priv, p, rx_q->rx_skbuff_dma[entry]);
stmmac_refill_desc3(priv, rx_q, p);
if (rx_q->rx_zeroc_thresh > 0)
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 04/12] net: stmmac: Let descriptor code clear the descriptor
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
Stop using if conditions depending on the GMAC version for clearing the
descriptor and use instead a helper implemented in the descriptor files.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 9 +++++++++
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 ++++
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +--------
5 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index f67caa1..119a2f9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -430,6 +430,14 @@ static void dwmac4_set_addr(struct dma_desc *p, dma_addr_t addr)
p->des1 = 0;
}
+static void dwmac4_clear(struct dma_desc *p)
+{
+ p->des0 = 0;
+ p->des1 = 0;
+ p->des2 = 0;
+ p->des3 = 0;
+}
+
const struct stmmac_desc_ops dwmac4_desc_ops = {
.tx_status = dwmac4_wrback_get_tx_status,
.rx_status = dwmac4_wrback_get_rx_status,
@@ -452,6 +460,7 @@ static void dwmac4_set_addr(struct dma_desc *p, dma_addr_t addr)
.display_ring = dwmac4_display_ring,
.set_mss = dwmac4_set_mss_ctxt,
.set_addr = dwmac4_set_addr,
+ .clear = dwmac4_clear,
};
const struct stmmac_mode_ops dwmac4_ring_mode_ops = { };
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 02749e4..17cd26f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -442,6 +442,11 @@ static void enh_desc_set_addr(struct dma_desc *p, dma_addr_t addr)
p->des2 = cpu_to_le32(addr);
}
+static void enh_desc_clear(struct dma_desc *p)
+{
+ p->des2 = 0;
+}
+
const struct stmmac_desc_ops enh_desc_ops = {
.tx_status = enh_desc_get_tx_status,
.rx_status = enh_desc_get_rx_status,
@@ -463,4 +468,5 @@ static void enh_desc_set_addr(struct dma_desc *p, dma_addr_t addr)
.get_rx_timestamp_status = enh_desc_get_rx_timestamp_status,
.display_ring = enh_desc_display_ring,
.set_addr = enh_desc_set_addr,
+ .clear = enh_desc_clear,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index d66d194..a6b9c97 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -81,6 +81,8 @@ struct stmmac_desc_ops {
void (*set_mss)(struct dma_desc *p, unsigned int mss);
/* set descriptor skbuff address */
void (*set_addr)(struct dma_desc *p, dma_addr_t addr);
+ /* clear descriptor */
+ void (*clear)(struct dma_desc *p);
};
#define stmmac_init_rx_desc(__priv, __args...) \
@@ -127,6 +129,8 @@ struct stmmac_desc_ops {
stmmac_do_void_callback(__priv, desc, set_mss, __args)
#define stmmac_set_desc_addr(__priv, __args...) \
stmmac_do_void_callback(__priv, desc, set_addr, __args)
+#define stmmac_clear_desc(__priv, __args...) \
+ stmmac_do_void_callback(__priv, desc, clear, __args)
struct stmmac_dma_cfg;
struct dma_features;
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index 6cf2c7c..a7b221b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -302,6 +302,11 @@ static void ndesc_set_addr(struct dma_desc *p, dma_addr_t addr)
p->des2 = cpu_to_le32(addr);
}
+static void ndesc_clear(struct dma_desc *p)
+{
+ p->des2 = 0;
+}
+
const struct stmmac_desc_ops ndesc_ops = {
.tx_status = ndesc_get_tx_status,
.rx_status = ndesc_get_rx_status,
@@ -322,4 +327,5 @@ static void ndesc_set_addr(struct dma_desc *p, dma_addr_t addr)
.get_rx_timestamp_status = ndesc_get_rx_timestamp_status,
.display_ring = ndesc_display_ring,
.set_addr = ndesc_set_addr,
+ .clear = ndesc_clear,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3f559d7..0ccee6a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1341,14 +1341,7 @@ static int init_dma_tx_desc_rings(struct net_device *dev)
else
p = tx_q->dma_tx + i;
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- p->des0 = 0;
- p->des1 = 0;
- p->des2 = 0;
- p->des3 = 0;
- } else {
- p->des2 = 0;
- }
+ stmmac_clear_desc(priv, p);
tx_q->tx_skbuff_dma[i].buf = 0;
tx_q->tx_skbuff_dma[i].map_as_page = false;
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 05/12] net: stmmac: Uniformize the use of dma_{rx/tx}_mode callbacks
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
Instead of relying on the GMAC version for choosing if we need to use
dma_{rx/tx}_mode or just dma_mode callback lets uniformize this and
always use the dma_{rx/tx}_mode callbacks.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 57 +++++++++-------
.../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 67 +++++++++++---------
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 10 ++--
drivers/net/ethernet/stmicro/stmmac/hwif.h | 6 --
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 32 +++------
5 files changed, 86 insertions(+), 86 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a3fa65b..4dafc6b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -398,13 +398,36 @@ static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr,
return ret;
}
-static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
- int rxmode, int rxfifosz)
+static void sun8i_dwmac_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
+{
+ u32 v;
+
+ v = readl(ioaddr + EMAC_RX_CTL1);
+ if (mode == SF_DMA_MODE) {
+ v |= EMAC_RX_MD;
+ } else {
+ v &= ~EMAC_RX_MD;
+ v &= ~EMAC_RX_TH_MASK;
+ if (mode < 32)
+ v |= EMAC_RX_TH_32;
+ else if (mode < 64)
+ v |= EMAC_RX_TH_64;
+ else if (mode < 96)
+ v |= EMAC_RX_TH_96;
+ else if (mode < 128)
+ v |= EMAC_RX_TH_128;
+ }
+ writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static void sun8i_dwmac_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
{
u32 v;
v = readl(ioaddr + EMAC_TX_CTL1);
- if (txmode == SF_DMA_MODE) {
+ if (mode == SF_DMA_MODE) {
v |= EMAC_TX_MD;
/* Undocumented bit (called TX_NEXT_FRM in BSP), the original
* comment is
@@ -415,40 +438,24 @@ static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
} else {
v &= ~EMAC_TX_MD;
v &= ~EMAC_TX_TH_MASK;
- if (txmode < 64)
+ if (mode < 64)
v |= EMAC_TX_TH_64;
- else if (txmode < 128)
+ else if (mode < 128)
v |= EMAC_TX_TH_128;
- else if (txmode < 192)
+ else if (mode < 192)
v |= EMAC_TX_TH_192;
- else if (txmode < 256)
+ else if (mode < 256)
v |= EMAC_TX_TH_256;
}
writel(v, ioaddr + EMAC_TX_CTL1);
-
- v = readl(ioaddr + EMAC_RX_CTL1);
- if (rxmode == SF_DMA_MODE) {
- v |= EMAC_RX_MD;
- } else {
- v &= ~EMAC_RX_MD;
- v &= ~EMAC_RX_TH_MASK;
- if (rxmode < 32)
- v |= EMAC_RX_TH_32;
- else if (rxmode < 64)
- v |= EMAC_RX_TH_64;
- else if (rxmode < 96)
- v |= EMAC_RX_TH_96;
- else if (rxmode < 128)
- v |= EMAC_RX_TH_128;
- }
- writel(v, ioaddr + EMAC_RX_CTL1);
}
static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
.reset = sun8i_dwmac_dma_reset,
.init = sun8i_dwmac_dma_init,
.dump_regs = sun8i_dwmac_dump_regs,
- .dma_mode = sun8i_dwmac_dma_operation_mode,
+ .dma_rx_mode = sun8i_dwmac_dma_operation_mode_rx,
+ .dma_tx_mode = sun8i_dwmac_dma_operation_mode_tx,
.enable_dma_transmission = sun8i_dwmac_enable_dma_transmission,
.enable_dma_irq = sun8i_dwmac_enable_dma_irq,
.disable_dma_irq = sun8i_dwmac_disable_dma_irq,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 7ecf549..d7447b0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -148,12 +148,40 @@ static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
return csr6;
}
-static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
- int rxmode, int rxfifosz)
+static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
{
u32 csr6 = readl(ioaddr + DMA_CONTROL);
- if (txmode == SF_DMA_MODE) {
+ if (mode == SF_DMA_MODE) {
+ pr_debug("GMAC: enable RX store and forward mode\n");
+ csr6 |= DMA_CONTROL_RSF;
+ } else {
+ pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
+ csr6 &= ~DMA_CONTROL_RSF;
+ csr6 &= DMA_CONTROL_TC_RX_MASK;
+ if (mode <= 32)
+ csr6 |= DMA_CONTROL_RTC_32;
+ else if (mode <= 64)
+ csr6 |= DMA_CONTROL_RTC_64;
+ else if (mode <= 96)
+ csr6 |= DMA_CONTROL_RTC_96;
+ else
+ csr6 |= DMA_CONTROL_RTC_128;
+ }
+
+ /* Configure flow control based on rx fifo size */
+ csr6 = dwmac1000_configure_fc(csr6, fifosz);
+
+ writel(csr6, ioaddr + DMA_CONTROL);
+}
+
+static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+ if (mode == SF_DMA_MODE) {
pr_debug("GMAC: enable TX store and forward mode\n");
/* Transmit COE type 2 cannot be done in cut-through mode. */
csr6 |= DMA_CONTROL_TSF;
@@ -162,42 +190,22 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
*/
csr6 |= DMA_CONTROL_OSF;
} else {
- pr_debug("GMAC: disabling TX SF (threshold %d)\n", txmode);
+ pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
csr6 &= ~DMA_CONTROL_TSF;
csr6 &= DMA_CONTROL_TC_TX_MASK;
/* Set the transmit threshold */
- if (txmode <= 32)
+ if (mode <= 32)
csr6 |= DMA_CONTROL_TTC_32;
- else if (txmode <= 64)
+ else if (mode <= 64)
csr6 |= DMA_CONTROL_TTC_64;
- else if (txmode <= 128)
+ else if (mode <= 128)
csr6 |= DMA_CONTROL_TTC_128;
- else if (txmode <= 192)
+ else if (mode <= 192)
csr6 |= DMA_CONTROL_TTC_192;
else
csr6 |= DMA_CONTROL_TTC_256;
}
- if (rxmode == SF_DMA_MODE) {
- pr_debug("GMAC: enable RX store and forward mode\n");
- csr6 |= DMA_CONTROL_RSF;
- } else {
- pr_debug("GMAC: disable RX SF mode (threshold %d)\n", rxmode);
- csr6 &= ~DMA_CONTROL_RSF;
- csr6 &= DMA_CONTROL_TC_RX_MASK;
- if (rxmode <= 32)
- csr6 |= DMA_CONTROL_RTC_32;
- else if (rxmode <= 64)
- csr6 |= DMA_CONTROL_RTC_64;
- else if (rxmode <= 96)
- csr6 |= DMA_CONTROL_RTC_96;
- else
- csr6 |= DMA_CONTROL_RTC_128;
- }
-
- /* Configure flow control based on rx fifo size */
- csr6 = dwmac1000_configure_fc(csr6, rxfifosz);
-
writel(csr6, ioaddr + DMA_CONTROL);
}
@@ -258,7 +266,8 @@ static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
.init = dwmac1000_dma_init,
.axi = dwmac1000_dma_axi,
.dump_regs = dwmac1000_dump_dma_regs,
- .dma_mode = dwmac1000_dma_operation_mode,
+ .dma_rx_mode = dwmac1000_dma_operation_mode_rx,
+ .dma_tx_mode = dwmac1000_dma_operation_mode_tx,
.enable_dma_transmission = dwmac_enable_dma_transmission,
.enable_dma_irq = dwmac_enable_dma_irq,
.disable_dma_irq = dwmac_disable_dma_irq,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 6502b9a..80339d3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -51,14 +51,14 @@ static void dwmac100_dma_init(void __iomem *ioaddr,
* The transmit threshold can be programmed by setting the TTC bits in the DMA
* control register.
*/
-static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode,
- int rxmode, int rxfifosz)
+static void dwmac100_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+ u32 channel, int fifosz, u8 qmode)
{
u32 csr6 = readl(ioaddr + DMA_CONTROL);
- if (txmode <= 32)
+ if (mode <= 32)
csr6 |= DMA_CONTROL_TTC_32;
- else if (txmode <= 64)
+ else if (mode <= 64)
csr6 |= DMA_CONTROL_TTC_64;
else
csr6 |= DMA_CONTROL_TTC_128;
@@ -113,7 +113,7 @@ static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
.reset = dwmac_dma_reset,
.init = dwmac100_dma_init,
.dump_regs = dwmac100_dump_dma_regs,
- .dma_mode = dwmac100_dma_operation_mode,
+ .dma_tx_mode = dwmac100_dma_operation_mode_tx,
.dma_diagnostic_fr = dwmac100_dma_diagnostic_fr,
.enable_dma_transmission = dwmac_enable_dma_transmission,
.enable_dma_irq = dwmac_enable_dma_irq,
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index a6b9c97..3ff4afe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -153,10 +153,6 @@ struct stmmac_dma_ops {
void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
/* Dump DMA registers */
void (*dump_regs)(void __iomem *ioaddr, u32 *reg_space);
- /* Set tx/rx threshold in the csr6 register
- * An invalid value enables the store-and-forward mode */
- void (*dma_mode)(void __iomem *ioaddr, int txmode, int rxmode,
- int rxfifosz);
void (*dma_rx_mode)(void __iomem *ioaddr, int mode, u32 channel,
int fifosz, u8 qmode);
void (*dma_tx_mode)(void __iomem *ioaddr, int mode, u32 channel,
@@ -199,8 +195,6 @@ struct stmmac_dma_ops {
stmmac_do_void_callback(__priv, dma, axi, __args)
#define stmmac_dump_dma_regs(__priv, __args...) \
stmmac_do_void_callback(__priv, dma, dump_regs, __args)
-#define stmmac_dma_mode(__priv, __args...) \
- stmmac_do_void_callback(__priv, dma, dma_mode, __args)
#define stmmac_dma_rx_mode(__priv, __args...) \
stmmac_do_void_callback(__priv, dma, dma_rx_mode, __args)
#define stmmac_dma_tx_mode(__priv, __args...) \
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0ccee6a..beb7ec1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1787,22 +1787,18 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
}
/* configure all channels */
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- for (chan = 0; chan < rx_channels_count; chan++) {
- qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
+ for (chan = 0; chan < rx_channels_count; chan++) {
+ qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
- stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
- rxfifosz, qmode);
- }
+ stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
+ rxfifosz, qmode);
+ }
- for (chan = 0; chan < tx_channels_count; chan++) {
- qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
+ for (chan = 0; chan < tx_channels_count; chan++) {
+ qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
- stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
- txfifosz, qmode);
- }
- } else {
- stmmac_dma_mode(priv, priv->ioaddr, txmode, rxmode, rxfifosz);
+ stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
+ txfifosz, qmode);
}
}
@@ -1971,14 +1967,8 @@ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
rxfifosz /= rx_channels_count;
txfifosz /= tx_channels_count;
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz,
- rxqmode);
- stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz,
- txqmode);
- } else {
- stmmac_dma_mode(priv, priv->ioaddr, txmode, rxmode, rxfifosz);
- }
+ stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, rxqmode);
+ stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz, txqmode);
}
static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)
--
1.7.1
^ permalink raw reply related
* Re: [RFC v4 3/5] virtio_ring: add packed ring support
From: Jason Wang @ 2018-05-16 12:51 UTC (permalink / raw)
To: Tiwei Bie; +Cc: mst, virtualization, linux-kernel, netdev, wexu, jfreimann
In-Reply-To: <20180516123909.GB986@debian>
On 2018年05月16日 20:39, Tiwei Bie wrote:
> On Wed, May 16, 2018 at 07:50:16PM +0800, Jason Wang wrote:
>> On 2018年05月16日 16:37, Tiwei Bie wrote:
> [...]
>>> struct vring_virtqueue {
>>> @@ -116,6 +117,9 @@ struct vring_virtqueue {
>>> /* Last written value to driver->flags in
>>> * guest byte order. */
>>> u16 event_flags_shadow;
>>> +
>>> + /* ID allocation. */
>>> + struct idr buffer_id;
>> I'm not sure idr is fit for the performance critical case here. Need to
>> measure its performance impact, especially if we have few unused slots.
> I'm also not sure.. But fortunately, it should be quite easy
> to replace it with something else without changing other code.
> If it will really hurt the performance, I'll change it.
We may want to do some benchmarking/profiling to see.
>
>>> };
>>> };
> [...]
>>> +static void detach_buf_packed(struct vring_virtqueue *vq, unsigned int head,
>>> + unsigned int id, void **ctx)
>>> +{
>>> + struct vring_packed_desc *desc;
>>> + unsigned int i, j;
>>> +
>>> + /* Clear data ptr. */
>>> + vq->desc_state[id].data = NULL;
>>> +
>>> + i = head;
>>> +
>>> + for (j = 0; j < vq->desc_state[id].num; j++) {
>>> + desc = &vq->vring_packed.desc[i];
>>> + vring_unmap_one_packed(vq, desc);
>> As mentioned in previous discussion, this probably won't work for the case
>> of out of order completion since it depends on the information in the
>> descriptor ring. We probably need to extend ctx to record such information.
> Above code doesn't depend on the information in the descriptor
> ring. The vq->desc_state[] is the extended ctx.
>
> Best regards,
> Tiwei Bie
Yes, but desc is a pointer to descriptor ring I think so
vring_unmap_one_packed() still depends on the content of descriptor ring?
Thanks
^ permalink raw reply
* [PATCH v2 net-next 06/12] net: stmmac: Remove uneeded checks for GMAC version
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
With the introducion of callbacks check in hwif.h we only call the
callback if HW supports it so there is no longer need to check for GMAC
version.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 +++++-----------
1 files changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index beb7ec1..ce6f839 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1973,11 +1973,8 @@ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)
{
- int ret = false;
+ int ret;
- /* Safety features are only available in cores >= 5.10 */
- if (priv->synopsys_id < DWMAC_CORE_5_10)
- return ret;
ret = stmmac_safety_feat_irq_status(priv, priv->dev,
priv->ioaddr, priv->dma_cap.asp, &priv->sstats);
if (ret && (ret != -EINVAL)) {
@@ -2495,12 +2492,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
stmmac_core_init(priv, priv->hw, dev);
/* Initialize MTL*/
- if (priv->synopsys_id >= DWMAC_CORE_4_00)
- stmmac_mtl_configuration(priv);
+ stmmac_mtl_configuration(priv);
/* Initialize Safety Features */
- if (priv->synopsys_id >= DWMAC_CORE_5_10)
- stmmac_safety_feat_configuration(priv);
+ stmmac_safety_feat_configuration(priv);
ret = stmmac_rx_ipc(priv, priv->hw);
if (!ret) {
@@ -3054,10 +3049,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
if (enh_desc)
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
- if (unlikely(is_jumbo) && likely(priv->synopsys_id <
- DWMAC_CORE_4_00)) {
+ if (unlikely(is_jumbo)) {
entry = stmmac_jumbo_frm(priv, tx_q, skb, csum_insertion);
- if (unlikely(entry < 0))
+ if (unlikely(entry < 0) && (entry != -EINVAL))
goto dma_map_err;
}
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 07/12] net: stmmac: Move PTP and MMC base address calculation to hwif.c
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
PTP and MMC modules base address can depend on the GMAC version. As this
is HW specific lets move this base address calculation to hwif.c. Also,
add an entry in the HW table so that we can specify the module offset.
This can later be extended to more modules, if deemed necessary.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/hwif.c | 34 +++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/hwif.h | 5 +++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 -----
3 files changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.c b/drivers/net/ethernet/stmicro/stmmac/hwif.c
index 9acc8d2..23a1264 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.c
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.c
@@ -6,6 +6,7 @@
#include "common.h"
#include "stmmac.h"
+#include "stmmac_ptp.h"
static u32 stmmac_get_id(struct stmmac_priv *priv, u32 id_reg)
{
@@ -72,6 +73,7 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
bool gmac;
bool gmac4;
u32 min_id;
+ const struct stmmac_regs_off regs;
const void *desc;
const void *dma;
const void *mac;
@@ -86,6 +88,10 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
.gmac = false,
.gmac4 = false,
.min_id = 0,
+ .regs = {
+ .ptp_off = PTP_GMAC3_X_OFFSET,
+ .mmc_off = MMC_GMAC3_X_OFFSET,
+ },
.desc = NULL,
.dma = &dwmac100_dma_ops,
.mac = &dwmac100_ops,
@@ -98,6 +104,10 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
.gmac = true,
.gmac4 = false,
.min_id = 0,
+ .regs = {
+ .ptp_off = PTP_GMAC3_X_OFFSET,
+ .mmc_off = MMC_GMAC3_X_OFFSET,
+ },
.desc = NULL,
.dma = &dwmac1000_dma_ops,
.mac = &dwmac1000_ops,
@@ -110,6 +120,10 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
.gmac = false,
.gmac4 = true,
.min_id = 0,
+ .regs = {
+ .ptp_off = PTP_GMAC4_OFFSET,
+ .mmc_off = MMC_GMAC4_OFFSET,
+ },
.desc = &dwmac4_desc_ops,
.dma = &dwmac4_dma_ops,
.mac = &dwmac4_ops,
@@ -122,6 +136,10 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
.gmac = false,
.gmac4 = true,
.min_id = DWMAC_CORE_4_00,
+ .regs = {
+ .ptp_off = PTP_GMAC4_OFFSET,
+ .mmc_off = MMC_GMAC4_OFFSET,
+ },
.desc = &dwmac4_desc_ops,
.dma = &dwmac4_dma_ops,
.mac = &dwmac410_ops,
@@ -134,6 +152,10 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
.gmac = false,
.gmac4 = true,
.min_id = DWMAC_CORE_4_10,
+ .regs = {
+ .ptp_off = PTP_GMAC4_OFFSET,
+ .mmc_off = MMC_GMAC4_OFFSET,
+ },
.desc = &dwmac4_desc_ops,
.dma = &dwmac410_dma_ops,
.mac = &dwmac410_ops,
@@ -146,6 +168,10 @@ static int stmmac_dwmac4_quirks(struct stmmac_priv *priv)
.gmac = false,
.gmac4 = true,
.min_id = DWMAC_CORE_5_10,
+ .regs = {
+ .ptp_off = PTP_GMAC4_OFFSET,
+ .mmc_off = MMC_GMAC4_OFFSET,
+ },
.desc = &dwmac4_desc_ops,
.dma = &dwmac410_dma_ops,
.mac = &dwmac510_ops,
@@ -175,6 +201,12 @@ int stmmac_hwif_init(struct stmmac_priv *priv)
/* Save ID for later use */
priv->synopsys_id = id;
+ /* Lets assume some safe values first */
+ priv->ptpaddr = priv->ioaddr +
+ (needs_gmac4 ? PTP_GMAC4_OFFSET : PTP_GMAC3_X_OFFSET);
+ priv->mmcaddr = priv->ioaddr +
+ (needs_gmac4 ? MMC_GMAC4_OFFSET : MMC_GMAC3_X_OFFSET);
+
/* Check for HW specific setup first */
if (priv->plat->setup) {
priv->hw = priv->plat->setup(priv);
@@ -206,6 +238,8 @@ int stmmac_hwif_init(struct stmmac_priv *priv)
mac->tc = entry->tc;
priv->hw = mac;
+ priv->ptpaddr = priv->ioaddr + entry->regs.ptp_off;
+ priv->mmcaddr = priv->ioaddr + entry->regs.mmc_off;
/* Entry found */
ret = entry->setup(priv);
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 3ff4afe..06fb20b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -442,6 +442,11 @@ struct stmmac_tc_ops {
#define stmmac_tc_setup_cls_u32(__priv, __args...) \
stmmac_do_callback(__priv, tc, setup_cls_u32, __args)
+struct stmmac_regs_off {
+ u32 ptp_off;
+ u32 mmc_off;
+};
+
extern const struct stmmac_ops dwmac100_ops;
extern const struct stmmac_dma_ops dwmac100_dma_ops;
extern const struct stmmac_ops dwmac1000_ops;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ce6f839..a4d6ea7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2085,14 +2085,6 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv)
unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET |
MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET;
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- priv->ptpaddr = priv->ioaddr + PTP_GMAC4_OFFSET;
- priv->mmcaddr = priv->ioaddr + MMC_GMAC4_OFFSET;
- } else {
- priv->ptpaddr = priv->ioaddr + PTP_GMAC3_X_OFFSET;
- priv->mmcaddr = priv->ioaddr + MMC_GMAC3_X_OFFSET;
- }
-
dwmac_mmc_intr_all_mask(priv->mmcaddr);
if (priv->dma_cap.rmon) {
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 08/12] net: stmmac: Uniformize the use of dma_init_* callbacks
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
Instead of relying on the GMAC version for choosing if we need to use
dma_init or dma_init_{rx/tx}_chan callback, lets uniformize this and
always use the dma_init_{rx/tx}_chan callbacks.
While at it, fix the use of dma_init_chan callback, which shall be
called for as many channels as the max of rx/tx channels.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
.../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 25 ++++++--
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 25 ++++++--
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 62 ++++++++-----------
5 files changed, 64 insertions(+), 53 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index d7447b0..aacc4aa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -81,8 +81,7 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
}
static void dwmac1000_dma_init(void __iomem *ioaddr,
- struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx, u32 dma_rx, int atds)
+ struct stmmac_dma_cfg *dma_cfg, int atds)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
@@ -119,12 +118,22 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
/* Mask interrupts by writing to CSR7 */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
- /* RX/TX descriptor base address lists must be written into
- * DMA CSR3 and CSR4, respectively
- */
- writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
- writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_rx_phy, u32 chan)
+{
+ /* RX descriptor base address list must be written into DMA CSR3 */
+ writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+}
+
+static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx_phy, u32 chan)
+{
+ /* TX descriptor base address list must be written into DMA CSR4 */
+ writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
}
static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
@@ -264,6 +273,8 @@ static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
const struct stmmac_dma_ops dwmac1000_dma_ops = {
.reset = dwmac_dma_reset,
.init = dwmac1000_dma_init,
+ .init_rx_chan = dwmac1000_dma_init_rx,
+ .init_tx_chan = dwmac1000_dma_init_tx,
.axi = dwmac1000_dma_axi,
.dump_regs = dwmac1000_dump_dma_regs,
.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 80339d3..21dee25 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -29,8 +29,7 @@
#include "dwmac_dma.h"
static void dwmac100_dma_init(void __iomem *ioaddr,
- struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx, u32 dma_rx, int atds)
+ struct stmmac_dma_cfg *dma_cfg, int atds)
{
/* Enable Application Access by writing to DMA CSR0 */
writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
@@ -38,12 +37,22 @@ static void dwmac100_dma_init(void __iomem *ioaddr,
/* Mask interrupts by writing to CSR7 */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
- /* RX/TX descriptor base addr lists must be written into
- * DMA CSR3 and CSR4, respectively
- */
- writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
- writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+static void dwmac100_dma_init_rx(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_rx_phy, u32 chan)
+{
+ /* RX descriptor base addr lists must be written into DMA CSR3 */
+ writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+}
+
+static void dwmac100_dma_init_tx(void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 dma_tx_phy, u32 chan)
+{
+ /* TX descriptor base addr lists must be written into DMA CSR4 */
+ writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
}
/* Store and Forward capability is not used at all.
@@ -112,6 +121,8 @@ static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
const struct stmmac_dma_ops dwmac100_dma_ops = {
.reset = dwmac_dma_reset,
.init = dwmac100_dma_init,
+ .init_rx_chan = dwmac100_dma_init_rx,
+ .init_tx_chan = dwmac100_dma_init_tx,
.dump_regs = dwmac100_dump_dma_regs,
.dma_tx_mode = dwmac100_dma_operation_mode_tx,
.dma_diagnostic_fr = dwmac100_dma_diagnostic_fr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 9aab5b3..bf8e5a1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -120,8 +120,7 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr,
}
static void dwmac4_dma_init(void __iomem *ioaddr,
- struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx, u32 dma_rx, int atds)
+ struct stmmac_dma_cfg *dma_cfg, int atds)
{
u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 06fb20b..1c674d6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -140,7 +140,7 @@ struct stmmac_dma_ops {
/* DMA core initialization */
int (*reset)(void __iomem *ioaddr);
void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
- u32 dma_tx, u32 dma_rx, int atds);
+ int atds);
void (*init_chan)(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, u32 chan);
void (*init_rx_chan)(void __iomem *ioaddr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a4d6ea7..0a5425c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2138,10 +2138,9 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
{
u32 rx_channels_count = priv->plat->rx_queues_to_use;
u32 tx_channels_count = priv->plat->tx_queues_to_use;
+ u32 dma_csr_ch = max(rx_channels_count, tx_channels_count);
struct stmmac_rx_queue *rx_q;
struct stmmac_tx_queue *tx_q;
- u32 dummy_dma_rx_phy = 0;
- u32 dummy_dma_tx_phy = 0;
u32 chan = 0;
int atds = 0;
int ret = 0;
@@ -2160,48 +2159,39 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
return ret;
}
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- /* DMA Configuration */
- stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg,
- dummy_dma_tx_phy, dummy_dma_rx_phy, atds);
-
- /* DMA RX Channel Configuration */
- for (chan = 0; chan < rx_channels_count; chan++) {
- rx_q = &priv->rx_queue[chan];
-
- stmmac_init_rx_chan(priv, priv->ioaddr,
- priv->plat->dma_cfg, rx_q->dma_rx_phy,
- chan);
-
- rx_q->rx_tail_addr = rx_q->dma_rx_phy +
- (DMA_RX_SIZE * sizeof(struct dma_desc));
- stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
- rx_q->rx_tail_addr, chan);
- }
+ /* DMA Configuration */
+ stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds);
- /* DMA TX Channel Configuration */
- for (chan = 0; chan < tx_channels_count; chan++) {
- tx_q = &priv->tx_queue[chan];
+ /* DMA RX Channel Configuration */
+ for (chan = 0; chan < rx_channels_count; chan++) {
+ rx_q = &priv->rx_queue[chan];
- stmmac_init_chan(priv, priv->ioaddr,
- priv->plat->dma_cfg, chan);
+ stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+ rx_q->dma_rx_phy, chan);
- stmmac_init_tx_chan(priv, priv->ioaddr,
- priv->plat->dma_cfg, tx_q->dma_tx_phy,
- chan);
+ rx_q->rx_tail_addr = rx_q->dma_rx_phy +
+ (DMA_RX_SIZE * sizeof(struct dma_desc));
+ stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
+ rx_q->rx_tail_addr, chan);
+ }
- tx_q->tx_tail_addr = tx_q->dma_tx_phy +
- (DMA_TX_SIZE * sizeof(struct dma_desc));
- stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
- tx_q->tx_tail_addr, chan);
- }
- } else {
- rx_q = &priv->rx_queue[chan];
+ /* DMA TX Channel Configuration */
+ for (chan = 0; chan < tx_channels_count; chan++) {
tx_q = &priv->tx_queue[chan];
- stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg,
- tx_q->dma_tx_phy, rx_q->dma_rx_phy, atds);
+
+ stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+ tx_q->dma_tx_phy, chan);
+
+ tx_q->tx_tail_addr = tx_q->dma_tx_phy +
+ (DMA_TX_SIZE * sizeof(struct dma_desc));
+ stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
+ tx_q->tx_tail_addr, chan);
}
+ /* DMA CSR Channel configuration */
+ for (chan = 0; chan < dma_csr_ch; chan++)
+ stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan);
+
if (priv->plat->axi)
stmmac_axi(priv, priv->ioaddr, priv->plat->axi);
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 09/12] net: stmmac: Remove uneeded check for GMAC version in stmmac_xmit
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
We either have .enable_dma_transmission or .set_tx_tail_ptr in the HW
table callbacks, we can never have both so there is no need to check for
GMAC version.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h | 1 -
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++-----
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 8474bf9..c63c1fe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -184,7 +184,6 @@
#define DMA_CHAN0_DBG_STAT_RPS_SHIFT 8
int dwmac4_dma_reset(void __iomem *ioaddr);
-void dwmac4_enable_dma_transmission(void __iomem *ioaddr, u32 tail_ptr);
void dwmac4_enable_dma_irq(void __iomem *ioaddr, u32 chan);
void dwmac410_enable_dma_irq(void __iomem *ioaddr, u32 chan);
void dwmac4_disable_dma_irq(void __iomem *ioaddr, u32 chan);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0a5425c..4d144e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3166,11 +3166,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
- if (priv->synopsys_id < DWMAC_CORE_4_00)
- stmmac_enable_dma_transmission(priv, priv->ioaddr);
- else
- stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr,
- queue);
+ stmmac_enable_dma_transmission(priv, priv->ioaddr);
+ stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
return NETDEV_TX_OK;
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 10/12] net: stmmac: Uniformize set_rx_owner()
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
Currently an if condition is used to select the correct callback to set
rx_onwer in descriptor. Lets keep this simple and always use the same
callback.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 12 ++++++------
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +----
5 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 119a2f9..63f869c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -189,9 +189,12 @@ static void dwmac4_set_tx_owner(struct dma_desc *p)
p->des3 |= cpu_to_le32(TDES3_OWN);
}
-static void dwmac4_set_rx_owner(struct dma_desc *p)
+static void dwmac4_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
{
- p->des3 |= cpu_to_le32(RDES3_OWN);
+ p->des3 = cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
+
+ if (!disable_rx_ic)
+ p->des3 |= cpu_to_le32(RDES3_INT_ON_COMPLETION_EN);
}
static int dwmac4_get_tx_ls(struct dma_desc *p)
@@ -292,10 +295,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc,
static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
int mode, int end)
{
- p->des3 = cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
-
- if (!disable_rx_ic)
- p->des3 |= cpu_to_le32(RDES3_INT_ON_COMPLETION_EN);
+ dwmac4_set_rx_owner(p, disable_rx_ic);
}
static void dwmac4_rd_init_tx_desc(struct dma_desc *p, int mode, int end)
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 17cd26f..743a60f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -292,7 +292,7 @@ static void enh_desc_set_tx_owner(struct dma_desc *p)
p->des0 |= cpu_to_le32(ETDES0_OWN);
}
-static void enh_desc_set_rx_owner(struct dma_desc *p)
+static void enh_desc_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
{
p->des0 |= cpu_to_le32(RDES0_OWN);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 1c674d6..06b5e5b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -59,7 +59,7 @@ struct stmmac_desc_ops {
/* Get the buffer size from the descriptor */
int (*get_tx_len)(struct dma_desc *p);
/* Handle extra events on specific interrupts hw dependent */
- void (*set_rx_owner)(struct dma_desc *p);
+ void (*set_rx_owner)(struct dma_desc *p, int disable_rx_ic);
/* Get the receive frame size */
int (*get_rx_frame_len)(struct dma_desc *p, int rx_coe_type);
/* Return the reception status looking at the RDES1 */
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index a7b221b..2facdb5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -168,7 +168,7 @@ static void ndesc_set_tx_owner(struct dma_desc *p)
p->des0 |= cpu_to_le32(TDES0_OWN);
}
-static void ndesc_set_rx_owner(struct dma_desc *p)
+static void ndesc_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
{
p->des0 |= cpu_to_le32(RDES0_OWN);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4d144e3..cbd2638 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3262,10 +3262,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
}
dma_wmb();
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- stmmac_init_rx_desc(priv, p, priv->use_riwt, 0, 0);
- else
- stmmac_set_rx_owner(priv, p);
+ stmmac_set_rx_owner(priv, p, priv->use_riwt);
dma_wmb();
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 11/12] net: stmmac: Let descriptor code get skbuff address
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
Stop using if conditions depending on the GMAC version for getting the
descriptor skbuff address and use instead a helper implemented in the
descriptor files.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 ++++
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +-----
5 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 63f869c..20299f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -424,6 +424,11 @@ static void dwmac4_set_mss_ctxt(struct dma_desc *p, unsigned int mss)
p->des3 = cpu_to_le32(TDES3_CONTEXT_TYPE | TDES3_CTXT_TCMSSV);
}
+static void dwmac4_get_addr(struct dma_desc *p, unsigned int *addr)
+{
+ *addr = le32_to_cpu(p->des0);
+}
+
static void dwmac4_set_addr(struct dma_desc *p, dma_addr_t addr)
{
p->des0 = cpu_to_le32(addr);
@@ -459,6 +464,7 @@ static void dwmac4_clear(struct dma_desc *p)
.init_tx_desc = dwmac4_rd_init_tx_desc,
.display_ring = dwmac4_display_ring,
.set_mss = dwmac4_set_mss_ctxt,
+ .get_addr = dwmac4_get_addr,
.set_addr = dwmac4_set_addr,
.clear = dwmac4_clear,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 743a60f..77914c8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -437,6 +437,11 @@ static void enh_desc_display_ring(void *head, unsigned int size, bool rx)
pr_info("\n");
}
+static void enh_desc_get_addr(struct dma_desc *p, unsigned int *addr)
+{
+ *addr = le32_to_cpu(p->des2);
+}
+
static void enh_desc_set_addr(struct dma_desc *p, dma_addr_t addr)
{
p->des2 = cpu_to_le32(addr);
@@ -467,6 +472,7 @@ static void enh_desc_clear(struct dma_desc *p)
.get_timestamp = enh_desc_get_timestamp,
.get_rx_timestamp_status = enh_desc_get_rx_timestamp_status,
.display_ring = enh_desc_display_ring,
+ .get_addr = enh_desc_get_addr,
.set_addr = enh_desc_set_addr,
.clear = enh_desc_clear,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 06b5e5b..f499a7f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -79,6 +79,8 @@ struct stmmac_desc_ops {
void (*display_ring)(void *head, unsigned int size, bool rx);
/* set MSS via context descriptor */
void (*set_mss)(struct dma_desc *p, unsigned int mss);
+ /* get descriptor skbuff address */
+ void (*get_addr)(struct dma_desc *p, unsigned int *addr);
/* set descriptor skbuff address */
void (*set_addr)(struct dma_desc *p, dma_addr_t addr);
/* clear descriptor */
@@ -127,6 +129,8 @@ struct stmmac_desc_ops {
stmmac_do_void_callback(__priv, desc, display_ring, __args)
#define stmmac_set_mss(__priv, __args...) \
stmmac_do_void_callback(__priv, desc, set_mss, __args)
+#define stmmac_get_desc_addr(__priv, __args...) \
+ stmmac_do_void_callback(__priv, desc, get_addr, __args)
#define stmmac_set_desc_addr(__priv, __args...) \
stmmac_do_void_callback(__priv, desc, set_addr, __args)
#define stmmac_clear_desc(__priv, __args...) \
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index 2facdb5..de65bb2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -297,6 +297,11 @@ static void ndesc_display_ring(void *head, unsigned int size, bool rx)
pr_info("\n");
}
+static void ndesc_get_addr(struct dma_desc *p, unsigned int *addr)
+{
+ *addr = le32_to_cpu(p->des2);
+}
+
static void ndesc_set_addr(struct dma_desc *p, dma_addr_t addr)
{
p->des2 = cpu_to_le32(addr);
@@ -326,6 +331,7 @@ static void ndesc_clear(struct dma_desc *p)
.get_timestamp = ndesc_get_timestamp,
.get_rx_timestamp_status = ndesc_get_rx_timestamp_status,
.display_ring = ndesc_display_ring,
+ .get_addr = ndesc_get_addr,
.set_addr = ndesc_set_addr,
.clear = ndesc_clear,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index cbd2638..3ae715e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3350,11 +3350,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
int frame_len;
unsigned int des;
- if (unlikely(priv->synopsys_id >= DWMAC_CORE_4_00))
- des = le32_to_cpu(p->des0);
- else
- des = le32_to_cpu(p->des2);
-
+ stmmac_get_desc_addr(priv, p, &des);
frame_len = stmmac_get_rx_frame_len(priv, p, coe);
/* If frame length is greater than skb buffer size
--
1.7.1
^ permalink raw reply related
* [PATCH v2 net-next 12/12] net: stmmac: Remove if condition by taking advantage of hwif return code
From: Jose Abreu @ 2018-05-16 12:50 UTC (permalink / raw)
To: netdev
Cc: Jose Abreu, David S. Miller, Joao Pinto, Vitor Soares,
Giuseppe Cavallaro, Alexandre Torgue
In-Reply-To: <cover.1526474646.git.joabreu@synopsys.com>
We can remove the if condition and check if return code is different
than -EINVAL, meaning callback is present.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 23 ++++++++++-----------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3ae715e..7af40e4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3644,6 +3644,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
/* To handle GMAC own interrupts */
if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {
int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);
+ int mtl_status;
if (unlikely(status)) {
/* For LPI we need to save the tx status */
@@ -3653,20 +3654,18 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
priv->tx_path_in_lpi_mode = false;
}
- if (priv->synopsys_id >= DWMAC_CORE_4_00) {
- for (queue = 0; queue < queues_count; queue++) {
- struct stmmac_rx_queue *rx_q =
- &priv->rx_queue[queue];
+ for (queue = 0; queue < queues_count; queue++) {
+ struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
- status |= stmmac_host_mtl_irq_status(priv,
- priv->hw, queue);
+ mtl_status = stmmac_host_mtl_irq_status(priv, priv->hw,
+ queue);
+ if (mtl_status != -EINVAL)
+ status |= mtl_status;
- if (status & CORE_IRQ_MTL_RX_OVERFLOW)
- stmmac_set_rx_tail_ptr(priv,
- priv->ioaddr,
- rx_q->rx_tail_addr,
- queue);
- }
+ if (status & CORE_IRQ_MTL_RX_OVERFLOW)
+ stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
+ rx_q->rx_tail_addr,
+ queue);
}
/* PCS link status */
--
1.7.1
^ permalink raw reply related
* Re: [RFC v4 4/5] virtio_ring: add event idx support in packed ring
From: Tiwei Bie @ 2018-05-16 12:58 UTC (permalink / raw)
To: Jason Wang; +Cc: mst, virtualization, linux-kernel, netdev, wexu, jfreimann
In-Reply-To: <64f5085b-4b62-d545-36e0-0951c11b29a8@redhat.com>
On Wed, May 16, 2018 at 08:17:21PM +0800, Jason Wang wrote:
> On 2018年05月16日 16:37, Tiwei Bie wrote:
[...]
> > @@ -1160,15 +1186,27 @@ static void virtqueue_disable_cb_packed(struct virtqueue *_vq)
> > static unsigned virtqueue_enable_cb_prepare_packed(struct virtqueue *_vq)
> > {
> > struct vring_virtqueue *vq = to_vvq(_vq);
> > + u16 wrap_counter;
> > START_USE(vq);
> > /* We optimistically turn back on interrupts, then check if there was
> > * more to do. */
> > + /* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to
> > + * either clear the flags bit or point the event index at the next
> > + * entry. Always update the event index to keep code simple. */
> > +
> > + wrap_counter = vq->wrap_counter;
> > + if (vq->last_used_idx > vq->next_avail_idx)
>
> Should this be ">=" consider rx refill may try to completely fill the ring?
It seems that there are two cases that last_used_idx
equals to next_avail_idx. The first one is that the
ring is empty. And the second one is that the ring
is full. Although in the first case, most probably,
the driver won't enable the interrupt.
Maybe I really should track the used_wrap_counter
instead of calculating it each time I need it.. I'll
give it a try..
>
> > + wrap_counter ^= 1;
> > +
> > + vq->vring_packed.driver->off_wrap = cpu_to_virtio16(_vq->vdev,
> > + vq->last_used_idx | (wrap_counter << 15));
> > if (vq->event_flags_shadow == VRING_EVENT_F_DISABLE) {
> > virtio_wmb(vq->weak_barriers);
> > - vq->event_flags_shadow = VRING_EVENT_F_ENABLE;
> > + vq->event_flags_shadow = vq->event ? VRING_EVENT_F_DESC :
> > + VRING_EVENT_F_ENABLE;
> > vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
> > vq->event_flags_shadow);
> > }
> > @@ -1194,15 +1232,40 @@ static bool virtqueue_poll_packed(struct virtqueue *_vq, unsigned last_used_idx)
> > static bool virtqueue_enable_cb_delayed_packed(struct virtqueue *_vq)
> > {
> > struct vring_virtqueue *vq = to_vvq(_vq);
> > + u16 bufs, used_idx, wrap_counter;
> > START_USE(vq);
> > /* We optimistically turn back on interrupts, then check if there was
> > * more to do. */
> > + /* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to
> > + * either clear the flags bit or point the event index at the next
> > + * entry. Always update the event index to keep code simple. */
> > +
> > + /* TODO: tune this threshold */
> > + if (vq->next_avail_idx < vq->last_used_idx)
> > + bufs = (vq->vring_packed.num + vq->next_avail_idx -
> > + vq->last_used_idx) * 3 / 4;
> > + else
> > + bufs = (vq->next_avail_idx - vq->last_used_idx) * 3 / 4;
> > +
> > + wrap_counter = vq->wrap_counter;
> > + if (vq->last_used_idx > vq->next_avail_idx)
> > + wrap_counter ^= 1;
> > +
> > + used_idx = vq->last_used_idx + bufs;
> > + if (used_idx >= vq->vring_packed.num) {
> > + used_idx -= vq->vring_packed.num;
> > + wrap_counter ^= 1;
> > + }
>
> Looks correct but maybe it's better to add some comments for such logic.
Make sense.
>
> > +
> > + vq->vring_packed.driver->off_wrap = cpu_to_virtio16(_vq->vdev,
> > + used_idx | (wrap_counter << 15));
> > if (vq->event_flags_shadow == VRING_EVENT_F_DISABLE) {
> > virtio_wmb(vq->weak_barriers);
> > - vq->event_flags_shadow = VRING_EVENT_F_ENABLE;
> > + vq->event_flags_shadow = vq->event ? VRING_EVENT_F_DESC :
> > + VRING_EVENT_F_ENABLE;
> > vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
> > vq->event_flags_shadow);
> > }
> > @@ -1869,8 +1932,10 @@ void vring_transport_features(struct virtio_device *vdev)
> > switch (i) {
> > case VIRTIO_RING_F_INDIRECT_DESC:
> > break;
> > +#if 0
> > case VIRTIO_RING_F_EVENT_IDX:
> > break;
> > +#endif
>
> Maybe it's time to remove this #if 0.
Will do it.
Thanks for the review!
Best regards,
Tiwei Bie
^ permalink raw reply
* Re: ECMP routing: problematic selection of outgoing interface
From: Andrew Lunn @ 2018-05-16 13:01 UTC (permalink / raw)
To: Hirotaka Yamamoto; +Cc: netdev@vger.kernel.org
In-Reply-To: <TY1PR0301MB10074DC6D1F5CE4F4B5AF7B5A0920@TY1PR0301MB1007.apcprd03.prod.outlook.com>
On Wed, May 16, 2018 at 01:51:36AM +0000, Hirotaka Yamamoto wrote:
> Hi,
>
> Recently I have built a highly-available network using an ECMP
> route connected to two isolated L2 switches as follows.
>
> Router-- ToR switch 1 ---- Linux
> | 192.168.11.1/24 | eth0: 192.168.11.2/24
> | | eth1: 192.168.12.2/24
> +-- ToR switch 2 ------+
> 192.168.12.1/24
>
> The (default) route has been configured with:
>
> $ sudo ip route add default \
> nexthop via 192.168.11.1 \
> nexthop via 192.168.12.1
>
> Then I found that Linux chooses a wrong outgoing device for some
> destination/source address pairs like this:
>
> $ ip route get 12.34.56.78 from 192.168.12.2:
> 12.34.56.78 from 192.168.12.2 via 192.168.11.1 dev eth0 uid 0
> # dev should be "eth1"
>
> As a consequence, programs like SSH or curl do not work for such
> destinations because routers drop packets having strange source
> addresses.
Hi Hirotaka
I assume you add the 192.168.11.1 and 192.168.12.1 to the interfaces
using global scope? Global scope means the IP addresses are valid
everywhere. All routers should know how to route packets to these IP
addresses. So a host is free to pick any of its global scope IP
addresses and use them. The outgoing interface should not matter,
since all routers downstream of it should have routes for the global
scope IP addresses.
It sounds like your router is doing reverse path filtering. It is
checking its routing table for the source address, and throwing the
packets away if they don't come in the interface the route points out
of. If you don't trust your network, this makes sense. It helps to
stop a host spoofing another host, by sending packets with a spoofed
IP address. But you probably want to do reverse path filtering on the
gateway which borders between the networks you do trust and those you
don't.
Andrew
^ permalink raw reply
* [PATCH net-next V2 1/2] cxgb4: Add support for FW_ETH_TX_PKT_VM_WR
From: Ganesh Goudar @ 2018-05-16 13:10 UTC (permalink / raw)
To: netdev, davem
Cc: nirranjan, indranil, venkatesh, Arjun Vynipadath, Casey Leedom,
Ganesh Goudar
From: Arjun Vynipadath <arjun@chelsio.com>
The present TX workrequest(FW_ETH_TX_PKT_WR) cant be used for
host->vf communication, since it doesn't loopback the outgoing
packets to virtual interfaces on the same port. This can be done using
FW_ETH_TX_PKT_VM_WR.
This fix depends on ethtool_flags to determine what WR to use for
TX path. Support for setting this flags by user is added in next commit.
Based on the original work by : Casey Leedom <leedom@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
V2: rename t4_eth_xmit() and t4vf_eth_xmit() to fix build error
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 13 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/sge.c | 372 +++++++++++++++++++++++-
3 files changed, 383 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 211086b..e7dd49d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -518,6 +518,15 @@ enum {
MAX_INGQ = MAX_ETH_QSETS + INGQ_EXTRAS,
};
+enum {
+ PRIV_FLAG_PORT_TX_VM_BIT,
+};
+
+#define PRIV_FLAG_PORT_TX_VM BIT(PRIV_FLAG_PORT_TX_VM_BIT)
+
+#define PRIV_FLAGS_ADAP 0
+#define PRIV_FLAGS_PORT PRIV_FLAG_PORT_TX_VM
+
struct adapter;
struct sge_rspq;
@@ -554,6 +563,7 @@ struct port_info {
struct hwtstamp_config tstamp_config;
bool ptp_enable;
struct sched_table *sched_tbl;
+ u32 eth_flags;
};
struct dentry;
@@ -864,6 +874,7 @@ struct adapter {
unsigned int flags;
unsigned int adap_idx;
enum chip_type chip;
+ unsigned int eth_flags;
int msg_enable;
__be16 vxlan_port;
@@ -1330,7 +1341,7 @@ void t4_os_link_changed(struct adapter *adap, int port_id, int link_stat);
void t4_free_sge_resources(struct adapter *adap);
void t4_free_ofld_rxqs(struct adapter *adap, int n, struct sge_ofld_rxq *q);
irq_handler_t t4_intr_handler(struct adapter *adap);
-netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t t4_start_xmit(struct sk_buff *skb, struct net_device *dev);
int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
const struct pkt_gl *gl);
int t4_mgmt_tx(struct adapter *adap, struct sk_buff *skb);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 130d1ee..2942b30 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3211,7 +3211,7 @@ static netdev_features_t cxgb_fix_features(struct net_device *dev,
static const struct net_device_ops cxgb4_netdev_ops = {
.ndo_open = cxgb_open,
.ndo_stop = cxgb_close,
- .ndo_start_xmit = t4_eth_xmit,
+ .ndo_start_xmit = t4_start_xmit,
.ndo_select_queue = cxgb_select_queue,
.ndo_get_stats64 = cxgb_get_stats,
.ndo_set_rx_mode = cxgb_set_rxmode,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 0f87e97..ede1ebc 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -1289,13 +1289,13 @@ static inline void t6_fill_tnl_lso(struct sk_buff *skb,
}
/**
- * t4_eth_xmit - add a packet to an Ethernet Tx queue
+ * cxgb4_eth_xmit - add a packet to an Ethernet Tx queue
* @skb: the packet
* @dev: the egress net device
*
* Add a packet to an SGE Ethernet Tx queue. Runs with softirqs disabled.
*/
-netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
{
u32 wr_mid, ctrl0, op;
u64 cntrl, *end, *sgl;
@@ -1549,6 +1549,374 @@ out_free: dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
+/* Constants ... */
+enum {
+ /* Egress Queue sizes, producer and consumer indices are all in units
+ * of Egress Context Units bytes. Note that as far as the hardware is
+ * concerned, the free list is an Egress Queue (the host produces free
+ * buffers which the hardware consumes) and free list entries are
+ * 64-bit PCI DMA addresses.
+ */
+ EQ_UNIT = SGE_EQ_IDXSIZE,
+ FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
+ TXD_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
+
+ T4VF_ETHTXQ_MAX_HDR = (sizeof(struct fw_eth_tx_pkt_vm_wr) +
+ sizeof(struct cpl_tx_pkt_lso_core) +
+ sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64),
+};
+
+/**
+ * t4vf_is_eth_imm - can an Ethernet packet be sent as immediate data?
+ * @skb: the packet
+ *
+ * Returns whether an Ethernet packet is small enough to fit completely as
+ * immediate data.
+ */
+static inline int t4vf_is_eth_imm(const struct sk_buff *skb)
+{
+ /* The VF Driver uses the FW_ETH_TX_PKT_VM_WR firmware Work Request
+ * which does not accommodate immediate data. We could dike out all
+ * of the support code for immediate data but that would tie our hands
+ * too much if we ever want to enhace the firmware. It would also
+ * create more differences between the PF and VF Drivers.
+ */
+ return false;
+}
+
+/**
+ * t4vf_calc_tx_flits - calculate the number of flits for a packet TX WR
+ * @skb: the packet
+ *
+ * Returns the number of flits needed for a TX Work Request for the
+ * given Ethernet packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int t4vf_calc_tx_flits(const struct sk_buff *skb)
+{
+ unsigned int flits;
+
+ /* If the skb is small enough, we can pump it out as a work request
+ * with only immediate data. In that case we just have to have the
+ * TX Packet header plus the skb data in the Work Request.
+ */
+ if (t4vf_is_eth_imm(skb))
+ return DIV_ROUND_UP(skb->len + sizeof(struct cpl_tx_pkt),
+ sizeof(__be64));
+
+ /* Otherwise, we're going to have to construct a Scatter gather list
+ * of the skb body and fragments. We also include the flits necessary
+ * for the TX Packet Work Request and CPL. We always have a firmware
+ * Write Header (incorporated as part of the cpl_tx_pkt_lso and
+ * cpl_tx_pkt structures), followed by either a TX Packet Write CPL
+ * message or, if we're doing a Large Send Offload, an LSO CPL message
+ * with an embedded TX Packet Write CPL message.
+ */
+ flits = sgl_len(skb_shinfo(skb)->nr_frags + 1);
+ if (skb_shinfo(skb)->gso_size)
+ flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) +
+ sizeof(struct cpl_tx_pkt_lso_core) +
+ sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+ else
+ flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) +
+ sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+ return flits;
+}
+
+/**
+ * cxgb4_vf_eth_xmit - add a packet to an Ethernet TX queue
+ * @skb: the packet
+ * @dev: the egress net device
+ *
+ * Add a packet to an SGE Ethernet TX queue. Runs with softirqs disabled.
+ */
+static netdev_tx_t cxgb4_vf_eth_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ u32 wr_mid;
+ u64 cntrl, *end;
+ int qidx, credits, max_pkt_len;
+ unsigned int flits, ndesc;
+ struct adapter *adapter;
+ struct sge_eth_txq *txq;
+ const struct port_info *pi;
+ struct fw_eth_tx_pkt_vm_wr *wr;
+ struct cpl_tx_pkt_core *cpl;
+ const struct skb_shared_info *ssi;
+ dma_addr_t addr[MAX_SKB_FRAGS + 1];
+ const size_t fw_hdr_copy_len = (sizeof(wr->ethmacdst) +
+ sizeof(wr->ethmacsrc) +
+ sizeof(wr->ethtype) +
+ sizeof(wr->vlantci));
+
+ /* The chip minimum packet length is 10 octets but the firmware
+ * command that we are using requires that we copy the Ethernet header
+ * (including the VLAN tag) into the header so we reject anything
+ * smaller than that ...
+ */
+ if (unlikely(skb->len < fw_hdr_copy_len))
+ goto out_free;
+
+ /* Discard the packet if the length is greater than mtu */
+ max_pkt_len = ETH_HLEN + dev->mtu;
+ if (skb_vlan_tag_present(skb))
+ max_pkt_len += VLAN_HLEN;
+ if (!skb_shinfo(skb)->gso_size && (unlikely(skb->len > max_pkt_len)))
+ goto out_free;
+
+ /* Figure out which TX Queue we're going to use. */
+ pi = netdev_priv(dev);
+ adapter = pi->adapter;
+ qidx = skb_get_queue_mapping(skb);
+ WARN_ON(qidx >= pi->nqsets);
+ txq = &adapter->sge.ethtxq[pi->first_qset + qidx];
+
+ /* Take this opportunity to reclaim any TX Descriptors whose DMA
+ * transfers have completed.
+ */
+ cxgb4_reclaim_completed_tx(adapter, &txq->q, true);
+
+ /* Calculate the number of flits and TX Descriptors we're going to
+ * need along with how many TX Descriptors will be left over after
+ * we inject our Work Request.
+ */
+ flits = t4vf_calc_tx_flits(skb);
+ ndesc = flits_to_desc(flits);
+ credits = txq_avail(&txq->q) - ndesc;
+
+ if (unlikely(credits < 0)) {
+ /* Not enough room for this packet's Work Request. Stop the
+ * TX Queue and return a "busy" condition. The queue will get
+ * started later on when the firmware informs us that space
+ * has opened up.
+ */
+ eth_txq_stop(txq);
+ dev_err(adapter->pdev_dev,
+ "%s: TX ring %u full while queue awake!\n",
+ dev->name, qidx);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (!t4vf_is_eth_imm(skb) &&
+ unlikely(cxgb4_map_skb(adapter->pdev_dev, skb, addr) < 0)) {
+ /* We need to map the skb into PCI DMA space (because it can't
+ * be in-lined directly into the Work Request) and the mapping
+ * operation failed. Record the error and drop the packet.
+ */
+ txq->mapping_err++;
+ goto out_free;
+ }
+
+ wr_mid = FW_WR_LEN16_V(DIV_ROUND_UP(flits, 2));
+ if (unlikely(credits < ETHTXQ_STOP_THRES)) {
+ /* After we're done injecting the Work Request for this
+ * packet, we'll be below our "stop threshold" so stop the TX
+ * Queue now and schedule a request for an SGE Egress Queue
+ * Update message. The queue will get started later on when
+ * the firmware processes this Work Request and sends us an
+ * Egress Queue Status Update message indicating that space
+ * has opened up.
+ */
+ eth_txq_stop(txq);
+ wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
+ }
+
+ /* Start filling in our Work Request. Note that we do _not_ handle
+ * the WR Header wrapping around the TX Descriptor Ring. If our
+ * maximum header size ever exceeds one TX Descriptor, we'll need to
+ * do something else here.
+ */
+ WARN_ON(DIV_ROUND_UP(T4VF_ETHTXQ_MAX_HDR, TXD_PER_EQ_UNIT) > 1);
+ wr = (void *)&txq->q.desc[txq->q.pidx];
+ wr->equiq_to_len16 = cpu_to_be32(wr_mid);
+ wr->r3[0] = cpu_to_be32(0);
+ wr->r3[1] = cpu_to_be32(0);
+ skb_copy_from_linear_data(skb, (void *)wr->ethmacdst, fw_hdr_copy_len);
+ end = (u64 *)wr + flits;
+
+ /* If this is a Large Send Offload packet we'll put in an LSO CPL
+ * message with an encapsulated TX Packet CPL message. Otherwise we
+ * just use a TX Packet CPL message.
+ */
+ ssi = skb_shinfo(skb);
+ if (ssi->gso_size) {
+ struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
+ bool v6 = (ssi->gso_type & SKB_GSO_TCPV6) != 0;
+ int l3hdr_len = skb_network_header_len(skb);
+ int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
+
+ wr->op_immdlen =
+ cpu_to_be32(FW_WR_OP_V(FW_ETH_TX_PKT_VM_WR) |
+ FW_WR_IMMDLEN_V(sizeof(*lso) +
+ sizeof(*cpl)));
+ /* Fill in the LSO CPL message. */
+ lso->lso_ctrl =
+ cpu_to_be32(LSO_OPCODE_V(CPL_TX_PKT_LSO) |
+ LSO_FIRST_SLICE_F |
+ LSO_LAST_SLICE_F |
+ LSO_IPV6_V(v6) |
+ LSO_ETHHDR_LEN_V(eth_xtra_len / 4) |
+ LSO_IPHDR_LEN_V(l3hdr_len / 4) |
+ LSO_TCPHDR_LEN_V(tcp_hdr(skb)->doff));
+ lso->ipid_ofst = cpu_to_be16(0);
+ lso->mss = cpu_to_be16(ssi->gso_size);
+ lso->seqno_offset = cpu_to_be32(0);
+ if (is_t4(adapter->params.chip))
+ lso->len = cpu_to_be32(skb->len);
+ else
+ lso->len = cpu_to_be32(LSO_T5_XFER_SIZE_V(skb->len));
+
+ /* Set up TX Packet CPL pointer, control word and perform
+ * accounting.
+ */
+ cpl = (void *)(lso + 1);
+
+ if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
+ cntrl = TXPKT_ETHHDR_LEN_V(eth_xtra_len);
+ else
+ cntrl = T6_TXPKT_ETHHDR_LEN_V(eth_xtra_len);
+
+ cntrl |= TXPKT_CSUM_TYPE_V(v6 ?
+ TX_CSUM_TCPIP6 : TX_CSUM_TCPIP) |
+ TXPKT_IPHDR_LEN_V(l3hdr_len);
+ txq->tso++;
+ txq->tx_cso += ssi->gso_segs;
+ } else {
+ int len;
+
+ len = (t4vf_is_eth_imm(skb)
+ ? skb->len + sizeof(*cpl)
+ : sizeof(*cpl));
+ wr->op_immdlen =
+ cpu_to_be32(FW_WR_OP_V(FW_ETH_TX_PKT_VM_WR) |
+ FW_WR_IMMDLEN_V(len));
+
+ /* Set up TX Packet CPL pointer, control word and perform
+ * accounting.
+ */
+ cpl = (void *)(wr + 1);
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ cntrl = hwcsum(adapter->params.chip, skb) |
+ TXPKT_IPCSUM_DIS_F;
+ txq->tx_cso++;
+ } else {
+ cntrl = TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F;
+ }
+ }
+
+ /* If there's a VLAN tag present, add that to the list of things to
+ * do in this Work Request.
+ */
+ if (skb_vlan_tag_present(skb)) {
+ txq->vlan_ins++;
+ cntrl |= TXPKT_VLAN_VLD_F | TXPKT_VLAN_V(skb_vlan_tag_get(skb));
+ }
+
+ /* Fill in the TX Packet CPL message header. */
+ cpl->ctrl0 = cpu_to_be32(TXPKT_OPCODE_V(CPL_TX_PKT_XT) |
+ TXPKT_INTF_V(pi->port_id) |
+ TXPKT_PF_V(0));
+ cpl->pack = cpu_to_be16(0);
+ cpl->len = cpu_to_be16(skb->len);
+ cpl->ctrl1 = cpu_to_be64(cntrl);
+
+ /* Fill in the body of the TX Packet CPL message with either in-lined
+ * data or a Scatter/Gather List.
+ */
+ if (t4vf_is_eth_imm(skb)) {
+ /* In-line the packet's data and free the skb since we don't
+ * need it any longer.
+ */
+ cxgb4_inline_tx_skb(skb, &txq->q, cpl + 1);
+ dev_consume_skb_any(skb);
+ } else {
+ /* Write the skb's Scatter/Gather list into the TX Packet CPL
+ * message and retain a pointer to the skb so we can free it
+ * later when its DMA completes. (We store the skb pointer
+ * in the Software Descriptor corresponding to the last TX
+ * Descriptor used by the Work Request.)
+ *
+ * The retained skb will be freed when the corresponding TX
+ * Descriptors are reclaimed after their DMAs complete.
+ * However, this could take quite a while since, in general,
+ * the hardware is set up to be lazy about sending DMA
+ * completion notifications to us and we mostly perform TX
+ * reclaims in the transmit routine.
+ *
+ * This is good for performamce but means that we rely on new
+ * TX packets arriving to run the destructors of completed
+ * packets, which open up space in their sockets' send queues.
+ * Sometimes we do not get such new packets causing TX to
+ * stall. A single UDP transmitter is a good example of this
+ * situation. We have a clean up timer that periodically
+ * reclaims completed packets but it doesn't run often enough
+ * (nor do we want it to) to prevent lengthy stalls. A
+ * solution to this problem is to run the destructor early,
+ * after the packet is queued but before it's DMAd. A con is
+ * that we lie to socket memory accounting, but the amount of
+ * extra memory is reasonable (limited by the number of TX
+ * descriptors), the packets do actually get freed quickly by
+ * new packets almost always, and for protocols like TCP that
+ * wait for acks to really free up the data the extra memory
+ * is even less. On the positive side we run the destructors
+ * on the sending CPU rather than on a potentially different
+ * completing CPU, usually a good thing.
+ *
+ * Run the destructor before telling the DMA engine about the
+ * packet to make sure it doesn't complete and get freed
+ * prematurely.
+ */
+ struct ulptx_sgl *sgl = (struct ulptx_sgl *)(cpl + 1);
+ struct sge_txq *tq = &txq->q;
+ int last_desc;
+
+ /* If the Work Request header was an exact multiple of our TX
+ * Descriptor length, then it's possible that the starting SGL
+ * pointer lines up exactly with the end of our TX Descriptor
+ * ring. If that's the case, wrap around to the beginning
+ * here ...
+ */
+ if (unlikely((void *)sgl == (void *)tq->stat)) {
+ sgl = (void *)tq->desc;
+ end = (void *)((void *)tq->desc +
+ ((void *)end - (void *)tq->stat));
+ }
+
+ cxgb4_write_sgl(skb, tq, sgl, end, 0, addr);
+ skb_orphan(skb);
+
+ last_desc = tq->pidx + ndesc - 1;
+ if (last_desc >= tq->size)
+ last_desc -= tq->size;
+ tq->sdesc[last_desc].skb = skb;
+ tq->sdesc[last_desc].sgl = sgl;
+ }
+
+ /* Advance our internal TX Queue state, tell the hardware about
+ * the new TX descriptors and return success.
+ */
+ txq_advance(&txq->q, ndesc);
+
+ cxgb4_ring_tx_db(adapter, &txq->q, ndesc);
+ return NETDEV_TX_OK;
+
+out_free:
+ /* An error of some sort happened. Free the TX skb and tell the
+ * OS that we've "dealt" with the packet ...
+ */
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+netdev_tx_t t4_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ if (unlikely(pi->eth_flags & PRIV_FLAG_PORT_TX_VM))
+ return cxgb4_vf_eth_xmit(skb, dev);
+
+ return cxgb4_eth_xmit(skb, dev);
+}
+
/**
* reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
* @q: the SGE control Tx queue
--
2.1.0
^ permalink raw reply related
* [PATCH net-next V2 2/2] cxgb4: Support ethtool private flags
From: Ganesh Goudar @ 2018-05-16 13:11 UTC (permalink / raw)
To: netdev, davem
Cc: nirranjan, indranil, venkatesh, Arjun Vynipadath, Casey Leedom,
Ganesh Goudar
From: Arjun Vynipadath <arjun@chelsio.com>
This is used to change TX workrequests, which helps in
host->vf communication.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
---
V2: no v2 changes in this patch
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 59d04d7..1d979a6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -177,6 +177,10 @@ static char loopback_stats_strings[][ETH_GSTRING_LEN] = {
"bg3_frames_trunc ",
};
+static const char cxgb4_priv_flags_strings[][ETH_GSTRING_LEN] = {
+ [PRIV_FLAG_PORT_TX_VM_BIT] = "port_tx_vm_wr",
+};
+
static int get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
@@ -185,6 +189,8 @@ static int get_sset_count(struct net_device *dev, int sset)
ARRAY_SIZE(adapter_stats_strings) +
ARRAY_SIZE(channel_stats_strings) +
ARRAY_SIZE(loopback_stats_strings);
+ case ETH_SS_PRIV_FLAGS:
+ return ARRAY_SIZE(cxgb4_priv_flags_strings);
default:
return -EOPNOTSUPP;
}
@@ -235,6 +241,7 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
FW_HDR_FW_VER_MINOR_G(exprom_vers),
FW_HDR_FW_VER_MICRO_G(exprom_vers),
FW_HDR_FW_VER_BUILD_G(exprom_vers));
+ info->n_priv_flags = ARRAY_SIZE(cxgb4_priv_flags_strings);
}
static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
@@ -250,6 +257,9 @@ static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
data += sizeof(channel_stats_strings);
memcpy(data, loopback_stats_strings,
sizeof(loopback_stats_strings));
+ } else if (stringset == ETH_SS_PRIV_FLAGS) {
+ memcpy(data, cxgb4_priv_flags_strings,
+ sizeof(cxgb4_priv_flags_strings));
}
}
@@ -1503,6 +1513,36 @@ static int cxgb4_get_module_eeprom(struct net_device *dev,
offset, len, &data[eprom->len - len]);
}
+static u32 cxgb4_get_priv_flags(struct net_device *netdev)
+{
+ struct port_info *pi = netdev_priv(netdev);
+ struct adapter *adapter = pi->adapter;
+
+ return (adapter->eth_flags | pi->eth_flags);
+}
+
+/**
+ * set_flags - set/unset specified flags if passed in new_flags
+ * @cur_flags: pointer to current flags
+ * @new_flags: new incoming flags
+ * @flags: set of flags to set/unset
+ */
+static inline void set_flags(u32 *cur_flags, u32 new_flags, u32 flags)
+{
+ *cur_flags = (*cur_flags & ~flags) | (new_flags & flags);
+}
+
+static int cxgb4_set_priv_flags(struct net_device *netdev, u32 flags)
+{
+ struct port_info *pi = netdev_priv(netdev);
+ struct adapter *adapter = pi->adapter;
+
+ set_flags(&adapter->eth_flags, flags, PRIV_FLAGS_ADAP);
+ set_flags(&pi->eth_flags, flags, PRIV_FLAGS_PORT);
+
+ return 0;
+}
+
static const struct ethtool_ops cxgb_ethtool_ops = {
.get_link_ksettings = get_link_ksettings,
.set_link_ksettings = set_link_ksettings,
@@ -1539,6 +1579,8 @@ static const struct ethtool_ops cxgb_ethtool_ops = {
.get_dump_data = get_dump_data,
.get_module_info = cxgb4_get_module_info,
.get_module_eeprom = cxgb4_get_module_eeprom,
+ .get_priv_flags = cxgb4_get_priv_flags,
+ .set_priv_flags = cxgb4_set_priv_flags,
};
void cxgb4_set_ethtool_ops(struct net_device *netdev)
--
2.1.0
^ permalink raw reply related
* Re: Xilinx axienet + DP83620 in fiber mode won't set netif_carrier_on
From: Andrew Lunn @ 2018-05-16 13:11 UTC (permalink / raw)
To: Alvaro G. M.; +Cc: netdev
In-Reply-To: <20180516091630.GA17469@salem.gmr.ssr.upm.es>
On Wed, May 16, 2018 at 11:16:31AM +0200, Alvaro G. M. wrote:
> Hi,
>
> I have a custom board with a Xilinx FPGA running Microblaze and fitting a
> Xilinx Axi Ethernet IP core. This core communicates through MII mode with a
> DP83620 PHY from Texas that supports both cabled and fiber interfaces, of
> which I'm using the latter.
>
> Under these circumstances, I've noticed that the interface is pretty much
> dead except for receiving broadcast packages, so I tried to dig on the
> driver to find the cause. Please, beware that I'm not very familiar with the
> netdev subsystem, so I may be mistaken on lots of things.
>
> It seems that of_phy_connect ends up calling netif_carrier_off:
>
> phy_device.c:1036
> /* Initial carrier state is off as the phy is about to be
> * (re)initialized.
> */
> netif_carrier_off(phydev->attached_dev);
>
> /* Do initial configuration here, now that
> * we have certain key parameters
> * (dev_flags and interface)
> */
> err = phy_init_hw(phydev);
> if (err)
> goto error;
>
> phy_resume(phydev);
>
> However, neither xilinx_axienet_main.c nor dp83848.c ever runs
> netif_carrier_on.
Hi Alvaro
What should happen in general terms is that at some point the link to
the peer is established. phylib, the generic PHY code, polls the PHY
ever second, asking what the link state is. When the link changes from
down to up, phylib will call the link_adjust callback in the MAC, and
netif_carrier_on().
When the PHY reports the link has gone down, it does similar, calls
the adjust_link callback, and netif_carrier_off().
So what you need to do is find out why the PHY driver never reports
link up. Does the PHY even know when the link is up? Often SFF/SFP
modules have a Signal Detect pin, which is connected to a gpio. Do you
have something like that? If so, you should look at the PHYLINK code
and the SFP device which was added recently.
Andrew
^ permalink raw reply
* Re: [Jfs-discussion] [PATCH 25/42] jfs: simplify procfs code
From: Dave Kleikamp @ 2018-05-16 13:15 UTC (permalink / raw)
To: Christoph Hellwig, Andrew Morton, Alexander Viro
Cc: linux-rtc, Alessandro Zummo, Alexandre Belloni, devel, linux-scsi,
linux-acpi, Greg Kroah-Hartman, Jiri Slaby, linux-kernel,
Alexey Dobriyan, linux-ide, netfilter-devel, megaraidlinux.pdl,
netdev, linux-ext4, linux-afs, jfs-discussion, drbd-dev
In-Reply-To: <20180516094346.20506-26-hch@lst.de>
On 05/16/2018 04:43 AM, Christoph Hellwig wrote:
> Use remove_proc_subtree to remove the whole subtree on cleanup, and
> unwind the registration loop into individual calls. Switch to use
> proc_create_seq where applicable.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
> ---
> fs/jfs/jfs_debug.c | 43 ++++++++++++++-----------------------------
> fs/jfs/jfs_debug.h | 10 +++++-----
> fs/jfs/jfs_logmgr.c | 14 +-------------
> fs/jfs/jfs_metapage.c | 14 +-------------
> fs/jfs/jfs_txnmgr.c | 28 ++--------------------------
> fs/jfs/jfs_xtree.c | 14 +-------------
> 6 files changed, 24 insertions(+), 99 deletions(-)
>
> diff --git a/fs/jfs/jfs_debug.c b/fs/jfs/jfs_debug.c
> index a70907606025..35a5b2a81ae0 100644
> --- a/fs/jfs/jfs_debug.c
> +++ b/fs/jfs/jfs_debug.c
> @@ -29,7 +29,6 @@
>
> #ifdef PROC_FS_JFS /* see jfs_debug.h */
>
> -static struct proc_dir_entry *base;
> #ifdef CONFIG_JFS_DEBUG
> static int jfs_loglevel_proc_show(struct seq_file *m, void *v)
> {
> @@ -66,43 +65,29 @@ static const struct file_operations jfs_loglevel_proc_fops = {
> };
> #endif
>
> -static struct {
> - const char *name;
> - const struct file_operations *proc_fops;
> -} Entries[] = {
> -#ifdef CONFIG_JFS_STATISTICS
> - { "lmstats", &jfs_lmstats_proc_fops, },
> - { "txstats", &jfs_txstats_proc_fops, },
> - { "xtstat", &jfs_xtstat_proc_fops, },
> - { "mpstat", &jfs_mpstat_proc_fops, },
> -#endif
> -#ifdef CONFIG_JFS_DEBUG
> - { "TxAnchor", &jfs_txanchor_proc_fops, },
> - { "loglevel", &jfs_loglevel_proc_fops }
> -#endif
> -};
> -#define NPROCENT ARRAY_SIZE(Entries)
> -
> void jfs_proc_init(void)
> {
> - int i;
> + struct proc_dir_entry *base;
>
> - if (!(base = proc_mkdir("fs/jfs", NULL)))
> + base = proc_mkdir("fs/jfs", NULL);
> + if (!base)
> return;
>
> - for (i = 0; i < NPROCENT; i++)
> - proc_create(Entries[i].name, 0, base, Entries[i].proc_fops);
> +#ifdef CONFIG_JFS_STATISTICS
> + proc_create_single("lmstats", 0, base, jfs_lmstats_proc_show);
> + proc_create_single("txstats", 0, base, jfs_txstats_proc_show);
> + proc_create_single("xtstat", 0, base, jfs_xtstat_proc_show);
> + proc_create_single("mpstat", 0, base, jfs_mpstat_proc_show);
> +#endif
> +#ifdef CONFIG_JFS_DEBUG
> + proc_create_single("TxAnchor", 0, base, jfs_txanchor_proc_show);
> + proc_create("loglevel", 0, base, &jfs_loglevel_proc_fops);
> +#endif
> }
>
> void jfs_proc_clean(void)
> {
> - int i;
> -
> - if (base) {
> - for (i = 0; i < NPROCENT; i++)
> - remove_proc_entry(Entries[i].name, base);
> - remove_proc_entry("fs/jfs", NULL);
> - }
> + remove_proc_subtree("fs/jfs", NULL);
> }
>
> #endif /* PROC_FS_JFS */
> diff --git a/fs/jfs/jfs_debug.h b/fs/jfs/jfs_debug.h
> index eafd1300a00b..0d9e35da8462 100644
> --- a/fs/jfs/jfs_debug.h
> +++ b/fs/jfs/jfs_debug.h
> @@ -62,7 +62,7 @@ extern void jfs_proc_clean(void);
>
> extern int jfsloglevel;
>
> -extern const struct file_operations jfs_txanchor_proc_fops;
> +int jfs_txanchor_proc_show(struct seq_file *m, void *v);
>
> /* information message: e.g., configuration, major event */
> #define jfs_info(fmt, arg...) do { \
> @@ -105,10 +105,10 @@ extern const struct file_operations jfs_txanchor_proc_fops;
> * ----------
> */
> #ifdef CONFIG_JFS_STATISTICS
> -extern const struct file_operations jfs_lmstats_proc_fops;
> -extern const struct file_operations jfs_txstats_proc_fops;
> -extern const struct file_operations jfs_mpstat_proc_fops;
> -extern const struct file_operations jfs_xtstat_proc_fops;
> +int jfs_lmstats_proc_show(struct seq_file *m, void *v);
> +int jfs_txstats_proc_show(struct seq_file *m, void *v);
> +int jfs_mpstat_proc_show(struct seq_file *m, void *v);
> +int jfs_xtstat_proc_show(struct seq_file *m, void *v);
>
> #define INCREMENT(x) ((x)++)
> #define DECREMENT(x) ((x)--)
> diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
> index 0e5d412c0b01..6b68df395892 100644
> --- a/fs/jfs/jfs_logmgr.c
> +++ b/fs/jfs/jfs_logmgr.c
> @@ -2493,7 +2493,7 @@ int lmLogFormat(struct jfs_log *log, s64 logAddress, int logSize)
> }
>
> #ifdef CONFIG_JFS_STATISTICS
> -static int jfs_lmstats_proc_show(struct seq_file *m, void *v)
> +int jfs_lmstats_proc_show(struct seq_file *m, void *v)
> {
> seq_printf(m,
> "JFS Logmgr stats\n"
> @@ -2510,16 +2510,4 @@ static int jfs_lmstats_proc_show(struct seq_file *m, void *v)
> lmStat.partial_page);
> return 0;
> }
> -
> -static int jfs_lmstats_proc_open(struct inode *inode, struct file *file)
> -{
> - return single_open(file, jfs_lmstats_proc_show, NULL);
> -}
> -
> -const struct file_operations jfs_lmstats_proc_fops = {
> - .open = jfs_lmstats_proc_open,
> - .read = seq_read,
> - .llseek = seq_lseek,
> - .release = single_release,
> -};
> #endif /* CONFIG_JFS_STATISTICS */
> diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
> index 1a3b0cc22ad3..fa2c6824c7f2 100644
> --- a/fs/jfs/jfs_metapage.c
> +++ b/fs/jfs/jfs_metapage.c
> @@ -815,7 +815,7 @@ void __invalidate_metapages(struct inode *ip, s64 addr, int len)
> }
>
> #ifdef CONFIG_JFS_STATISTICS
> -static int jfs_mpstat_proc_show(struct seq_file *m, void *v)
> +int jfs_mpstat_proc_show(struct seq_file *m, void *v)
> {
> seq_printf(m,
> "JFS Metapage statistics\n"
> @@ -828,16 +828,4 @@ static int jfs_mpstat_proc_show(struct seq_file *m, void *v)
> mpStat.lockwait);
> return 0;
> }
> -
> -static int jfs_mpstat_proc_open(struct inode *inode, struct file *file)
> -{
> - return single_open(file, jfs_mpstat_proc_show, NULL);
> -}
> -
> -const struct file_operations jfs_mpstat_proc_fops = {
> - .open = jfs_mpstat_proc_open,
> - .read = seq_read,
> - .llseek = seq_lseek,
> - .release = single_release,
> -};
> #endif
> diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c
> index 4d973524c887..a5663cb621d8 100644
> --- a/fs/jfs/jfs_txnmgr.c
> +++ b/fs/jfs/jfs_txnmgr.c
> @@ -2998,7 +2998,7 @@ int jfs_sync(void *arg)
> }
>
> #if defined(CONFIG_PROC_FS) && defined(CONFIG_JFS_DEBUG)
> -static int jfs_txanchor_proc_show(struct seq_file *m, void *v)
> +int jfs_txanchor_proc_show(struct seq_file *m, void *v)
> {
> char *freewait;
> char *freelockwait;
> @@ -3032,22 +3032,10 @@ static int jfs_txanchor_proc_show(struct seq_file *m, void *v)
> list_empty(&TxAnchor.unlock_queue) ? "" : "not ");
> return 0;
> }
> -
> -static int jfs_txanchor_proc_open(struct inode *inode, struct file *file)
> -{
> - return single_open(file, jfs_txanchor_proc_show, NULL);
> -}
> -
> -const struct file_operations jfs_txanchor_proc_fops = {
> - .open = jfs_txanchor_proc_open,
> - .read = seq_read,
> - .llseek = seq_lseek,
> - .release = single_release,
> -};
> #endif
>
> #if defined(CONFIG_PROC_FS) && defined(CONFIG_JFS_STATISTICS)
> -static int jfs_txstats_proc_show(struct seq_file *m, void *v)
> +int jfs_txstats_proc_show(struct seq_file *m, void *v)
> {
> seq_printf(m,
> "JFS TxStats\n"
> @@ -3072,16 +3060,4 @@ static int jfs_txstats_proc_show(struct seq_file *m, void *v)
> TxStat.txLockAlloc_freelock);
> return 0;
> }
> -
> -static int jfs_txstats_proc_open(struct inode *inode, struct file *file)
> -{
> - return single_open(file, jfs_txstats_proc_show, NULL);
> -}
> -
> -const struct file_operations jfs_txstats_proc_fops = {
> - .open = jfs_txstats_proc_open,
> - .read = seq_read,
> - .llseek = seq_lseek,
> - .release = single_release,
> -};
> #endif
> diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c
> index 5cde6d2fcfca..2c200b5256a6 100644
> --- a/fs/jfs/jfs_xtree.c
> +++ b/fs/jfs/jfs_xtree.c
> @@ -3874,7 +3874,7 @@ s64 xtTruncate_pmap(tid_t tid, struct inode *ip, s64 committed_size)
> }
>
> #ifdef CONFIG_JFS_STATISTICS
> -static int jfs_xtstat_proc_show(struct seq_file *m, void *v)
> +int jfs_xtstat_proc_show(struct seq_file *m, void *v)
> {
> seq_printf(m,
> "JFS Xtree statistics\n"
> @@ -3887,16 +3887,4 @@ static int jfs_xtstat_proc_show(struct seq_file *m, void *v)
> xtStat.split);
> return 0;
> }
> -
> -static int jfs_xtstat_proc_open(struct inode *inode, struct file *file)
> -{
> - return single_open(file, jfs_xtstat_proc_show, NULL);
> -}
> -
> -const struct file_operations jfs_xtstat_proc_fops = {
> - .open = jfs_xtstat_proc_open,
> - .read = seq_read,
> - .llseek = seq_lseek,
> - .release = single_release,
> -};
> #endif
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox