* [PATCH 07/11] batman-adv: Prevent duplicated global TT entry
From: Simon Wunderlich @ 2018-09-19 12:22 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r
In-Reply-To: <20180919122213.23108-1-sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
From: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
The function batadv_tt_global_orig_entry_add is responsible for adding new
tt_orig_list_entry to the orig_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
Fixes: d657e621a0f5 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry")
Signed-off-by: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
Signed-off-by: Simon Wunderlich <sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
---
net/batman-adv/translation-table.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 12a2b7d21376..d21624c44665 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1613,6 +1613,8 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global,
{
struct batadv_tt_orig_list_entry *orig_entry;
+ spin_lock_bh(&tt_global->list_lock);
+
orig_entry = batadv_tt_global_orig_entry_find(tt_global, orig_node);
if (orig_entry) {
/* refresh the ttvn: the current value could be a bogus one that
@@ -1635,11 +1637,9 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global,
orig_entry->flags = flags;
kref_init(&orig_entry->refcount);
- spin_lock_bh(&tt_global->list_lock);
kref_get(&orig_entry->refcount);
hlist_add_head_rcu(&orig_entry->list,
&tt_global->orig_list);
- spin_unlock_bh(&tt_global->list_lock);
atomic_inc(&tt_global->orig_list_count);
sync_flags:
@@ -1647,6 +1647,8 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global,
out:
if (orig_entry)
batadv_tt_orig_list_entry_put(orig_entry);
+
+ spin_unlock_bh(&tt_global->list_lock);
}
/**
--
2.11.0
^ permalink raw reply related
* [PATCH 08/11] batman-adv: Prevent duplicated tvlv handler
From: Simon Wunderlich @ 2018-09-19 12:22 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r
In-Reply-To: <20180919122213.23108-1-sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
From: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
The function batadv_tvlv_handler_register is responsible for adding new
tvlv_handler to the handler_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
Signed-off-by: Simon Wunderlich <sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
---
net/batman-adv/tvlv.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/tvlv.c b/net/batman-adv/tvlv.c
index a637458205d1..40e69c9346d2 100644
--- a/net/batman-adv/tvlv.c
+++ b/net/batman-adv/tvlv.c
@@ -529,15 +529,20 @@ void batadv_tvlv_handler_register(struct batadv_priv *bat_priv,
{
struct batadv_tvlv_handler *tvlv_handler;
+ spin_lock_bh(&bat_priv->tvlv.handler_list_lock);
+
tvlv_handler = batadv_tvlv_handler_get(bat_priv, type, version);
if (tvlv_handler) {
+ spin_unlock_bh(&bat_priv->tvlv.handler_list_lock);
batadv_tvlv_handler_put(tvlv_handler);
return;
}
tvlv_handler = kzalloc(sizeof(*tvlv_handler), GFP_ATOMIC);
- if (!tvlv_handler)
+ if (!tvlv_handler) {
+ spin_unlock_bh(&bat_priv->tvlv.handler_list_lock);
return;
+ }
tvlv_handler->ogm_handler = optr;
tvlv_handler->unicast_handler = uptr;
@@ -547,7 +552,6 @@ void batadv_tvlv_handler_register(struct batadv_priv *bat_priv,
kref_init(&tvlv_handler->refcount);
INIT_HLIST_NODE(&tvlv_handler->list);
- spin_lock_bh(&bat_priv->tvlv.handler_list_lock);
kref_get(&tvlv_handler->refcount);
hlist_add_head_rcu(&tvlv_handler->list, &bat_priv->tvlv.handler_list);
spin_unlock_bh(&bat_priv->tvlv.handler_list_lock);
--
2.11.0
^ permalink raw reply related
* [PATCH 09/11] batman-adv: fix backbone_gw refcount on queue_work() failure
From: Simon Wunderlich @ 2018-09-19 12:22 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r, Marek Lindner
In-Reply-To: <20180919122213.23108-1-sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
From: Marek Lindner <mareklindner-rVWd3aGhH2z5bpWLKbzFeg@public.gmane.org>
The backbone_gw refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.
Signed-off-by: Marek Lindner <mareklindner-rVWd3aGhH2z5bpWLKbzFeg@public.gmane.org>
Signed-off-by: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
Signed-off-by: Simon Wunderlich <sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
---
net/batman-adv/bridge_loop_avoidance.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index ff9659af6b91..5f1aeeded0e3 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1772,6 +1772,7 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb,
{
struct batadv_bla_backbone_gw *backbone_gw;
struct ethhdr *ethhdr;
+ bool ret;
ethhdr = eth_hdr(skb);
@@ -1795,8 +1796,13 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb,
if (unlikely(!backbone_gw))
return true;
- queue_work(batadv_event_workqueue, &backbone_gw->report_work);
- /* backbone_gw is unreferenced in the report work function function */
+ ret = queue_work(batadv_event_workqueue, &backbone_gw->report_work);
+
+ /* backbone_gw is unreferenced in the report work function function
+ * if queue_work() call was successful
+ */
+ if (!ret)
+ batadv_backbone_gw_put(backbone_gw);
return true;
}
--
2.11.0
^ permalink raw reply related
* [PATCH 10/11] batman-adv: fix hardif_neigh refcount on queue_work() failure
From: Simon Wunderlich @ 2018-09-19 12:22 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r, Marek Lindner
In-Reply-To: <20180919122213.23108-1-sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
From: Marek Lindner <mareklindner-rVWd3aGhH2z5bpWLKbzFeg@public.gmane.org>
The hardif_neigh refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.
Signed-off-by: Marek Lindner <mareklindner-rVWd3aGhH2z5bpWLKbzFeg@public.gmane.org>
Signed-off-by: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
Signed-off-by: Simon Wunderlich <sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
---
net/batman-adv/bat_v_elp.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index e103c759b7ab..9f481cfdf77d 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -268,6 +268,7 @@ static void batadv_v_elp_periodic_work(struct work_struct *work)
struct batadv_priv *bat_priv;
struct sk_buff *skb;
u32 elp_interval;
+ bool ret;
bat_v = container_of(work, struct batadv_hard_iface_bat_v, elp_wq.work);
hard_iface = container_of(bat_v, struct batadv_hard_iface, bat_v);
@@ -329,8 +330,11 @@ static void batadv_v_elp_periodic_work(struct work_struct *work)
* may sleep and that is not allowed in an rcu protected
* context. Therefore schedule a task for that.
*/
- queue_work(batadv_event_workqueue,
- &hardif_neigh->bat_v.metric_work);
+ ret = queue_work(batadv_event_workqueue,
+ &hardif_neigh->bat_v.metric_work);
+
+ if (!ret)
+ batadv_hardif_neigh_put(hardif_neigh);
}
rcu_read_unlock();
--
2.11.0
^ permalink raw reply related
* [PATCH 11/11] batman-adv: Increase version number to 2018.3
From: Simon Wunderlich @ 2018-09-19 12:22 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r
In-Reply-To: <20180919122213.23108-1-sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
From: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
Signed-off-by: Sven Eckelmann <sven-KaDOiPu9UxWEi8DpZVb4nw@public.gmane.org>
Signed-off-by: Simon Wunderlich <sw-2YrNx6rUIHYiY0qSoAWiAoQuADTiUCJX@public.gmane.org>
---
net/batman-adv/main.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index 8da3c9336111..3ccc75ee719c 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -25,7 +25,7 @@
#define BATADV_DRIVER_DEVICE "batman-adv"
#ifndef BATADV_SOURCE_VERSION
-#define BATADV_SOURCE_VERSION "2018.2"
+#define BATADV_SOURCE_VERSION "2018.3"
#endif
/* B.A.T.M.A.N. parameters */
--
2.11.0
^ permalink raw reply related
* Re: [PATCH net-next v5 07/20] zinc: Poly1305 generic C implementations and selftest
From: Jason A. Donenfeld @ 2018-09-19 12:26 UTC (permalink / raw)
To: Andy Lutomirski
Cc: Eric Biggers, LKML, Netdev, Linux Crypto Mailing List,
David Miller, Greg Kroah-Hartman, Samuel Neves, Andrew Lutomirski,
Jean-Philippe Aumasson
In-Reply-To: <CAHmME9oERxpgxavBjoHEGwPCCq+O20eiDAXPvDSKgB4D+TRcDQ@mail.gmail.com>
On Wed, Sep 19, 2018 at 1:50 PM Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>
> On Wed, Sep 19, 2018 at 6:19 AM Andy Lutomirski <luto@amacapital.net> wrote:
> > Can you not uglify the code a bit by using normal (non-compound) liberals as described in the response to that email?
>
> I can define a bunch of variables, and then string them all together
> in an array at the end. This is a bit ugly and less maintainable, but
> would be the best of both worlds.
Alright, I wrote a little program to do this for me in a way that
actually doesn't look half bad. Thanks for suggesting.
Jason
^ permalink raw reply
* [RFC] net;sched: Try to find idle cpu for RPS to handle packets
From: Kirill Tkhai @ 2018-09-19 12:28 UTC (permalink / raw)
To: peterz, davem, daniel, edumazet, tom, ktkhai, netdev,
linux-kernel
Many workloads have polling mode of work. The application
checks for incomming packets from time to time, but it also
has a work to do, when there is no packets. This RFC
tries to develop an idea to queue RPS packets on idle
CPU in the the L3 domain of the consumer, so backlog
processing of the packets and the application can execute
in parallel.
We require this in case of network cards does not
have enough RX queues to cover all online CPUs (this seems
to be the most cards), and get_rps_cpu() actually chooses
remote cpu, and SMP interrupt is sent. Here we may try
our best, and to find idle CPU nearly the consumer's CPU.
Note, that in case of consumer works in poll mode and it
does not waits for incomming packets, its CPU will be not
idle, while CPU of a sleeping consumer may be idle. So,
not polling consumers will still be able to have skb
handled on its CPU.
In case of network card has many queues, the device
interrupts will come on consumer's CPU, and this patch
won't try to find idle cpu for them.
I've tried simple netperf test for this:
netserver -p 1234
netperf -L 127.0.0.1 -p 1234 -l 100
Before:
87380 16384 16384 100.00 60323.56
87380 16384 16384 100.00 60388.46
87380 16384 16384 100.00 60217.68
87380 16384 16384 100.00 57995.41
87380 16384 16384 100.00 60659.00
After:
87380 16384 16384 100.00 64569.09
87380 16384 16384 100.00 64569.25
87380 16384 16384 100.00 64691.63
87380 16384 16384 100.00 64930.14
87380 16384 16384 100.00 62670.15
The difference between best runs is +7%,
the worst runs differ +8%.
What do you think about following somehow in this way?
[This also requires a pre-patch, which exports
select_idle_sibling() and teaches it handles
NULL task argument, but since it's not very
interesting to see, I skip it sending].
Kirill
---
net/core/dev.c | 34 +++++++++++++++++++++++++---------
1 file changed, 25 insertions(+), 9 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 559a91271f82..9a867ff34622 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3738,13 +3738,12 @@ set_rps_cpu(struct net_device *dev, struct sk_buff *skb,
static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
struct rps_dev_flow **rflowp)
{
- const struct rps_sock_flow_table *sock_flow_table;
+ struct rps_sock_flow_table *sock_flow_table;
struct netdev_rx_queue *rxqueue = dev->_rx;
struct rps_dev_flow_table *flow_table;
struct rps_map *map;
+ u32 tcpu, hash, val;
int cpu = -1;
- u32 tcpu;
- u32 hash;
if (skb_rx_queue_recorded(skb)) {
u16 index = skb_get_rx_queue(skb);
@@ -3774,6 +3773,9 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
sock_flow_table = rcu_dereference(rps_sock_flow_table);
if (flow_table && sock_flow_table) {
struct rps_dev_flow *rflow;
+ bool want_new_cpu = false;
+ unsigned long flags;
+ unsigned int qhead;
u32 next_cpu;
u32 ident;
@@ -3801,12 +3803,26 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
* This guarantees that all previous packets for the flow
* have been dequeued, thus preserving in order delivery.
*/
- if (unlikely(tcpu != next_cpu) &&
- (tcpu >= nr_cpu_ids || !cpu_online(tcpu) ||
- ((int)(per_cpu(softnet_data, tcpu).input_queue_head -
- rflow->last_qtail)) >= 0)) {
- tcpu = next_cpu;
- rflow = set_rps_cpu(dev, skb, rflow, next_cpu);
+ if (tcpu != next_cpu) {
+ qhead = per_cpu(softnet_data, tcpu).input_queue_head;
+ if (tcpu >= nr_cpu_ids || !cpu_online(tcpu) ||
+ (int)(qhead - rflow->last_qtail) >= 0)
+ want_new_cpu = true;
+ } else if (tcpu < nr_cpu_ids && cpu_online(tcpu) &&
+ tcpu != smp_processor_id() && !available_idle_cpu(tcpu)) {
+ want_new_cpu = true;
+ }
+
+ if (want_new_cpu) {
+ local_irq_save(flags);
+ next_cpu = select_idle_sibling(NULL, next_cpu, next_cpu);
+ local_irq_restore(flags);
+ if (tcpu != next_cpu) {
+ tcpu = next_cpu;
+ rflow = set_rps_cpu(dev, skb, rflow, tcpu);
+ val = (hash & ~rps_cpu_mask) | tcpu;
+ sock_flow_table->ents[hash & sock_flow_table->mask] = val;
+ }
}
if (tcpu < nr_cpu_ids && cpu_online(tcpu)) {
^ permalink raw reply related
* [PATCH 0/5] pull request for net-next: batman-adv 2018-09-19
From: Simon Wunderlich @ 2018-09-19 12:32 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q
Cc: netdev-u79uwXL29TY76Z2rM5mHXA,
b.a.t.m.a.n-ZwoEplunGu2X36UT3dwllkB+6BGkLq7r
Hi David,
here is a little feature and cleanup pull request of batman-adv to go into net-next.
Please pull or let me know of any problem!
Thank you,
Simon
The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:
Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)
are available in the git repository at:
git://git.open-mesh.org/linux-merge.git tags/batadv-next-for-davem-20180919
for you to fetch changes up to a7ea49afcc888dd5aac76774767bfb90be937aad:
batman-adv: Enable LockLess TX for softif (2018-09-15 09:51:10 +0200)
----------------------------------------------------------------
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Inform users about debugfs interface deprecation, by Sven Eckelmann
- Implement tracing, planned to replace debugfs log messages,
by Sven Eckelmann
- Move OGM rebroadcasts to per interface struct, by Sven Eckelmann
- Enable LockLess TX to increase throughput, by Sven Eckelmann
----------------------------------------------------------------
Simon Wunderlich (1):
batman-adv: Start new development cycle
Sven Eckelmann (4):
batman-adv: Mark debugfs functionality as deprecated
batman-adv: Provide debug messages as trace events
batman-adv: Move OGM rebroadcast stats to orig_ifinfo
batman-adv: Enable LockLess TX for softif
net/batman-adv/Kconfig | 11 ++
net/batman-adv/Makefile | 3 +
net/batman-adv/bat_iv_ogm.c | 330 ++++++++++++----------------------------
net/batman-adv/debugfs.c | 37 +++++
net/batman-adv/debugfs.h | 6 +
net/batman-adv/hard-interface.c | 47 +++---
net/batman-adv/icmp_socket.c | 3 +
net/batman-adv/log.c | 20 ++-
net/batman-adv/main.h | 2 +-
net/batman-adv/originator.c | 107 -------------
net/batman-adv/originator.h | 4 -
net/batman-adv/soft-interface.c | 2 +-
net/batman-adv/trace.c | 22 +++
net/batman-adv/trace.h | 78 ++++++++++
net/batman-adv/types.h | 62 +++-----
15 files changed, 323 insertions(+), 411 deletions(-)
create mode 100644 net/batman-adv/trace.c
create mode 100644 net/batman-adv/trace.h
^ permalink raw reply
* [PATCH 00/21] SMMU enablement for NXP LS1043A and LS1046A
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
This patch series adds SMMU support for NXP LS1043A and LS1046A chips
and consists mostly in important driver fixes and the required device
tree updates. It touches several subsystems and consists of three main
parts:
- changes in soc/drivers/fsl/qbman drivers adding iommu mapping of
reserved memory areas, fixes and defered probe support
- changes in drivers/net/ethernet/freescale/dpaa_eth drivers
consisting in misc dma mapping related fixes and probe ordering
- addition of the actual arm smmu device tree node together with
various adjustments to the device trees
Performance impact
Running iperf benchmarks in a back-to-back setup (both sides
having smmu enabled) on a 10GBps port show an important
networking performance degradation of around %40 (9.48Gbps
linerate vs 5.45Gbps). If you need performance but without
SMMU support you can use "iommu.passthrough=1" to disable
SMMU.
USB issue and workaround
There's a problem with the usb controllers in these chips
generating smaller, 40-bit wide dma addresses instead of the 48-bit
supported at the smmu input. So you end up in a situation where the
smmu is mapped with 48-bit address translations, but the device
generates transactions with clipped 40-bit addresses, thus smmu
context faults are triggered. I encountered a similar situation for
mmc that I managed to fix in software [1] however for USB I did not
find a proper place in the code to add a similar fix. The only
workaround I found was to add this kernel parameter which limits the
usb dma to 32-bit size: "xhci-hcd.quirks=0x800000".
This workaround if far from ideal, so any suggestions for a code
based workaround in this area would be greatly appreciated.
The patch set is based on net-next so, if generally agreed, I'd suggest
to get the patches through the netdev tree after getting all the Acks.
[1] https://patchwork.kernel.org/patch/10506627/
Laurentiu Tudor (21):
soc/fsl/qman: fixup liodns only on ppc targets
soc/fsl/bman: map FBPR area in the iommu
soc/fsl/qman: map FQD and PFDR areas in the iommu
soc/fsl/qman-portal: map CENA area in the iommu
soc/fsl/qbman: add APIs to retrieve the probing status
soc/fsl/qman_portals: defer probe after qman's probe
soc/fsl/bman_portals: defer probe after bman's probe
soc/fsl/qbman_portals: add APIs to retrieve the probing status
fsl/fman: backup and restore ICID registers
fsl/fman: add API to get the device behind a fman port
dpaa_eth: defer probing after qbman
dpaa_eth: base dma mappings on the fman rx port
dpaa_eth: fix iova handling for contiguous frames
dpaa_eth: fix iova handling for sg frames
dpaa_eth: fix SG frame cleanup
arm64: dts: ls1046a: add smmu node
arm64: dts: ls1043a: add smmu node
arm64: dts: ls104xa: set mask to drop TBU ID from StreamID
arm64: dts: ls104x: add missing dma ranges property
arm64: dts: ls104x: add iommu-map to pci controllers
arm64: dts: ls104x: make dma-coherent global to the SoC
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++-
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 48 +++++++
.../net/ethernet/freescale/dpaa/dpaa_eth.c | 136 ++++++++++++------
drivers/net/ethernet/freescale/fman/fman.c | 35 ++++-
drivers/net/ethernet/freescale/fman/fman.h | 4 +
.../net/ethernet/freescale/fman/fman_port.c | 14 ++
.../net/ethernet/freescale/fman/fman_port.h | 2 +
drivers/soc/fsl/qbman/bman_ccsr.c | 23 +++
drivers/soc/fsl/qbman/bman_portal.c | 20 ++-
drivers/soc/fsl/qbman/qman_ccsr.c | 30 ++++
drivers/soc/fsl/qbman/qman_portal.c | 35 +++++
include/soc/fsl/bman.h | 16 +++
include/soc/fsl/qman.h | 17 +++
13 files changed, 379 insertions(+), 53 deletions(-)
--
2.17.1
^ permalink raw reply
* [PATCH 01/21] soc/fsl/qman: fixup liodns only on ppc targets
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
ARM SoCs use SMMU so the liodn fixup done in the qman driver is no
longer making sense and it also breaks the ICID settings inherited
from u-boot. Do the fixups only for PPC targets.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/qman_ccsr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/soc/fsl/qbman/qman_ccsr.c b/drivers/soc/fsl/qbman/qman_ccsr.c
index 79cba58387a5..619e22030460 100644
--- a/drivers/soc/fsl/qbman/qman_ccsr.c
+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
@@ -597,6 +597,7 @@ static int qman_init_ccsr(struct device *dev)
#define LIO_CFG_LIODN_MASK 0x0fff0000
void qman_liodn_fixup(u16 channel)
{
+#ifdef CONFIG_PPC
static int done;
static u32 liodn_offset;
u32 before, after;
@@ -616,6 +617,7 @@ void qman_liodn_fixup(u16 channel)
qm_ccsr_out(REG_REV3_QCSP_LIO_CFG(idx), after);
else
qm_ccsr_out(REG_QCSP_LIO_CFG(idx), after);
+#endif
}
#define IO_CFG_SDEST_MASK 0x00ff0000
--
2.17.1
^ permalink raw reply related
* [PATCH 02/21] soc/fsl/bman: map FBPR area in the iommu
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Add a one-to-one iommu mapping for bman private data memory (FBPR).
This is required for BMAN to work without faults behind an iommu.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/bman_ccsr.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c b/drivers/soc/fsl/qbman/bman_ccsr.c
index 05c42235dd41..680f67f04fb4 100644
--- a/drivers/soc/fsl/qbman/bman_ccsr.c
+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
@@ -29,6 +29,7 @@
*/
#include "bman_priv.h"
+#include <linux/iommu.h>
u16 bman_ip_rev;
EXPORT_SYMBOL(bman_ip_rev);
@@ -171,6 +172,7 @@ static int fsl_bman_probe(struct platform_device *pdev)
int ret, err_irq;
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
+ struct iommu_domain *domain;
struct resource *res;
u16 id, bm_pool_cnt;
u8 major, minor;
@@ -216,6 +218,16 @@ static int fsl_bman_probe(struct platform_device *pdev)
dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz);
+ /* Create an 1-to-1 iommu mapping for FBPR area */
+ domain = iommu_get_domain_for_dev(dev);
+ if (domain) {
+ ret = iommu_map(iommu_get_domain_for_dev(dev),
+ fbpr_a, fbpr_a, fbpr_sz,
+ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
+ if (ret)
+ dev_warn(dev, "failed to iommu_map() %d\n", ret);
+ }
+
bm_set_memory(fbpr_a, fbpr_sz);
err_irq = platform_get_irq(pdev, 0);
--
2.17.1
^ permalink raw reply related
* [PATCH 03/21] soc/fsl/qman: map FQD and PFDR areas in the iommu
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Add a one-to-one iommu mapping for qman private data memory areas
(FQD and PFDR). This is required for QMAN to work without faults
behind an iommu.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/qman_ccsr.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/soc/fsl/qbman/qman_ccsr.c b/drivers/soc/fsl/qbman/qman_ccsr.c
index 619e22030460..7163f7511ce1 100644
--- a/drivers/soc/fsl/qbman/qman_ccsr.c
+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
@@ -29,6 +29,7 @@
*/
#include "qman_priv.h"
+#include <linux/iommu.h>
u16 qman_ip_rev;
EXPORT_SYMBOL(qman_ip_rev);
@@ -692,6 +693,7 @@ static int fsl_qman_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
+ struct iommu_domain *domain;
struct resource *res;
int ret, err_irq;
u16 id;
@@ -769,6 +771,21 @@ static int fsl_qman_probe(struct platform_device *pdev)
}
dev_dbg(dev, "Allocated PFDR 0x%llx 0x%zx\n", pfdr_a, pfdr_sz);
+ /* Create an 1-to-1 iommu mapping for fqd and pfdr areas */
+ domain = iommu_get_domain_for_dev(dev);
+ if (domain) {
+ ret = iommu_map(domain,
+ fqd_a, fqd_a, fqd_sz,
+ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
+ if (ret)
+ dev_warn(dev, "iommu_map(fqd) failed %d\n", ret);
+ ret = iommu_map(domain,
+ pfdr_a, pfdr_a, pfdr_sz,
+ IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE);
+ if (ret)
+ dev_warn(dev, "iommu_map(pfdr) failed %d\n", ret);
+ }
+
ret = qman_init_ccsr(dev);
if (ret) {
dev_err(dev, "CCSR setup failed\n");
--
2.17.1
^ permalink raw reply related
* [PATCH 05/21] soc/fsl/qbman: add APIs to retrieve the probing status
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Add a couple of new APIs to check the probing status of qman and bman:
'int bman_is_probed()' and 'int qman_is_probed()'.
They return the following values.
* 1 if qman/bman were probed correctly
* 0 if qman/bman were not yet probed
* -1 if probing of qman/bman failed
Drivers that use qman/bman driver services are required to use these
APIs before calling any functions exported by qman or bman drivers
or otherwise they will crash the kernel.
The APIs will be used in the following couple of qbman portal patches
and later in the series in the dpaa1 ethernet driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/bman_ccsr.c | 11 +++++++++++
drivers/soc/fsl/qbman/qman_ccsr.c | 11 +++++++++++
include/soc/fsl/bman.h | 8 ++++++++
include/soc/fsl/qman.h | 8 ++++++++
4 files changed, 38 insertions(+)
diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c b/drivers/soc/fsl/qbman/bman_ccsr.c
index 680f67f04fb4..2c11883d42a5 100644
--- a/drivers/soc/fsl/qbman/bman_ccsr.c
+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
@@ -121,6 +121,7 @@ static void bm_set_memory(u64 ba, u32 size)
*/
static dma_addr_t fbpr_a;
static size_t fbpr_sz;
+static int __bman_probed;
static int bman_fbpr(struct reserved_mem *rmem)
{
@@ -167,6 +168,12 @@ static irqreturn_t bman_isr(int irq, void *ptr)
return IRQ_HANDLED;
}
+int bman_is_probed(void)
+{
+ return __bman_probed;
+}
+EXPORT_SYMBOL_GPL(bman_is_probed);
+
static int fsl_bman_probe(struct platform_device *pdev)
{
int ret, err_irq;
@@ -177,6 +184,8 @@ static int fsl_bman_probe(struct platform_device *pdev)
u16 id, bm_pool_cnt;
u8 major, minor;
+ __bman_probed = -1;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n",
@@ -267,6 +276,8 @@ static int fsl_bman_probe(struct platform_device *pdev)
return ret;
}
+ __bman_probed = 1;
+
return 0;
};
diff --git a/drivers/soc/fsl/qbman/qman_ccsr.c b/drivers/soc/fsl/qbman/qman_ccsr.c
index 7163f7511ce1..0bfbe24b479a 100644
--- a/drivers/soc/fsl/qbman/qman_ccsr.c
+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
@@ -274,6 +274,7 @@ static const struct qman_error_info_mdata error_mdata[] = {
static u32 __iomem *qm_ccsr_start;
/* A SDQCR mask comprising all the available/visible pool channels */
static u32 qm_pools_sdqcr;
+static int __qman_probed;
static inline u32 qm_ccsr_in(u32 offset)
{
@@ -689,6 +690,12 @@ static int qman_resource_init(struct device *dev)
return 0;
}
+int qman_is_probed(void)
+{
+ return __qman_probed;
+}
+EXPORT_SYMBOL_GPL(qman_is_probed);
+
static int fsl_qman_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -699,6 +706,8 @@ static int fsl_qman_probe(struct platform_device *pdev)
u16 id;
u8 major, minor;
+ __qman_probed = -1;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n",
@@ -847,6 +856,8 @@ static int fsl_qman_probe(struct platform_device *pdev)
if (ret)
return ret;
+ __qman_probed = 1;
+
return 0;
}
diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h
index eaaf56df4086..5b99cb2ea5ef 100644
--- a/include/soc/fsl/bman.h
+++ b/include/soc/fsl/bman.h
@@ -126,4 +126,12 @@ int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num);
*/
int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num);
+/**
+ * bman_is_probed - Check if bman is probed
+ *
+ * Returns 1 if the bman driver successfully probed, -1 if the bman driver
+ * failed to probe or 0 if the bman driver did not probed yet.
+ */
+int bman_is_probed(void);
+
#endif /* __FSL_BMAN_H */
diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
index d4dfefdee6c1..597783b8a3a0 100644
--- a/include/soc/fsl/qman.h
+++ b/include/soc/fsl/qman.h
@@ -1186,4 +1186,12 @@ int qman_alloc_cgrid_range(u32 *result, u32 count);
*/
int qman_release_cgrid(u32 id);
+/**
+ * qman_is_probed - Check if qman is probed
+ *
+ * Returns 1 if the qman driver successfully probed, -1 if the qman driver
+ * failed to probe or 0 if the qman driver did not probed yet.
+ */
+int qman_is_probed(void);
+
#endif /* __FSL_QMAN_H */
--
2.17.1
^ permalink raw reply related
* [PATCH 06/21] soc/fsl/qman_portals: defer probe after qman's probe
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Defer probe of qman portals after qman probing. This fixes the crash
below, seen on NXP LS1043A SoCs:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000004
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[0000000000000004] user address but active_mm is swapper
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.18.0-rc1-next-20180622-00200-g986f5c179185 #9
Hardware name: LS1043A RDB Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : qman_set_sdest+0x74/0xa0
lr : qman_portal_probe+0x22c/0x470
sp : ffff00000803bbc0
x29: ffff00000803bbc0 x28: 0000000000000000
x27: ffff0000090c1b88 x26: ffff00000927cb68
x25: ffff00000927c000 x24: ffff00000927cb60
x23: 0000000000000000 x22: 0000000000000000
x21: ffff0000090e9000 x20: ffff800073b5c810
x19: ffff800027401298 x18: ffffffffffffffff
x17: 0000000000000001 x16: 0000000000000000
x15: ffff0000090e96c8 x14: ffff80002740138a
x13: ffff0000090f2000 x12: 0000000000000030
x11: ffff000008f25000 x10: 0000000000000000
x9 : ffff80007bdfd2c0 x8 : 0000000000004000
x7 : ffff80007393cc18 x6 : 0040000000000001
x5 : 0000000000000000 x4 : ffffffffffffffff
x3 : 0000000000000004 x2 : ffff00000927c900
x1 : 0000000000000000 x0 : 0000000000000004
Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
Call trace:
qman_set_sdest+0x74/0xa0
platform_drv_probe+0x50/0xa8
driver_probe_device+0x214/0x2f8
__driver_attach+0xd8/0xe0
bus_for_each_dev+0x68/0xc8
driver_attach+0x20/0x28
bus_add_driver+0x108/0x228
driver_register+0x60/0x110
__platform_driver_register+0x40/0x48
qman_portal_driver_init+0x20/0x84
do_one_initcall+0x58/0x168
kernel_init_freeable+0x184/0x22c
kernel_init+0x10/0x108
ret_from_fork+0x10/0x18
Code: f9400443 11001000 927e4800 8b000063 (b9400063)
---[ end trace 4f6d50489ecfb930 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/qman_portal.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/soc/fsl/qbman/qman_portal.c b/drivers/soc/fsl/qbman/qman_portal.c
index 012bb95e87e1..7fd13f8c8da2 100644
--- a/drivers/soc/fsl/qbman/qman_portal.c
+++ b/drivers/soc/fsl/qbman/qman_portal.c
@@ -229,6 +229,14 @@ static int qman_portal_probe(struct platform_device *pdev)
int irq, cpu, err;
u32 val;
+ err = qman_is_probed();
+ if (!err)
+ return -EPROBE_DEFER;
+ if (err < 0) {
+ dev_err(&pdev->dev, "failing probe due to qman probe error\n");
+ return -ENODEV;
+ }
+
pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL);
if (!pcfg)
return -ENOMEM;
--
2.17.1
^ permalink raw reply related
* [PATCH 07/21] soc/fsl/bman_portals: defer probe after bman's probe
From: laurentiu.tudor @ 2018-09-19 12:35 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
A crash in bman portal probing could not be triggered (as is the case
with qman portals) but it does make calls [1] into the bman driver so
lets make sure the bman portal probing happens after bman's.
[1] bman_p_irqsource_add() (in bman) called by:
init_pcfg() called by:
bman_portal_probe()
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/bman_portal.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/fsl/qbman/bman_portal.c b/drivers/soc/fsl/qbman/bman_portal.c
index 2f71f7df3465..f9edd28894fd 100644
--- a/drivers/soc/fsl/qbman/bman_portal.c
+++ b/drivers/soc/fsl/qbman/bman_portal.c
@@ -91,7 +91,15 @@ static int bman_portal_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
struct bm_portal_config *pcfg;
struct resource *addr_phys[2];
- int irq, cpu;
+ int irq, cpu, err;
+
+ err = bman_is_probed();
+ if (!err)
+ return -EPROBE_DEFER;
+ if (err < 0) {
+ dev_err(&pdev->dev, "failing probe due to bman probe error\n");
+ return -ENODEV;
+ }
pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL);
if (!pcfg)
--
2.17.1
^ permalink raw reply related
* [PATCH 08/21] soc/fsl/qbman_portals: add APIs to retrieve the probing status
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Add a couple of new APIs to check the probing status of the required
cpu bound qman and bman portals:
'int bman_portals_probed()' and 'int qman_portals_probed()'.
They return the following values.
* 1 if qman/bman portals were all probed correctly
* 0 if qman/bman portals were not yet probed
* -1 if probing of qman/bman portals failed
Drivers that use qman/bman portal driver services are required to use
these APIs before calling any functions exported by these drivers or
otherwise they will crash the kernel.
First user will be the dpaa1 ethernet driver, coming in a subsequent
patch.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/soc/fsl/qbman/bman_portal.c | 10 ++++++++++
drivers/soc/fsl/qbman/qman_portal.c | 10 ++++++++++
include/soc/fsl/bman.h | 8 ++++++++
include/soc/fsl/qman.h | 9 +++++++++
4 files changed, 37 insertions(+)
diff --git a/drivers/soc/fsl/qbman/bman_portal.c b/drivers/soc/fsl/qbman/bman_portal.c
index f9edd28894fd..8048d35de8a2 100644
--- a/drivers/soc/fsl/qbman/bman_portal.c
+++ b/drivers/soc/fsl/qbman/bman_portal.c
@@ -32,6 +32,7 @@
static struct bman_portal *affine_bportals[NR_CPUS];
static struct cpumask portal_cpus;
+static int __bman_portals_probed;
/* protect bman global registers and global data shared among portals */
static DEFINE_SPINLOCK(bman_lock);
@@ -85,6 +86,12 @@ static int bman_online_cpu(unsigned int cpu)
return 0;
}
+int bman_portals_probed(void)
+{
+ return __bman_portals_probed;
+}
+EXPORT_SYMBOL_GPL(bman_portals_probed);
+
static int bman_portal_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -148,6 +155,7 @@ static int bman_portal_probe(struct platform_device *pdev)
spin_lock(&bman_lock);
cpu = cpumask_next_zero(-1, &portal_cpus);
if (cpu >= nr_cpu_ids) {
+ __bman_portals_probed = 1;
/* unassigned portal, skip init */
spin_unlock(&bman_lock);
return 0;
@@ -173,6 +181,8 @@ static int bman_portal_probe(struct platform_device *pdev)
err_ioremap2:
memunmap(pcfg->addr_virt_ce);
err_ioremap1:
+ __bman_portals_probed = 1;
+
return -ENXIO;
}
diff --git a/drivers/soc/fsl/qbman/qman_portal.c b/drivers/soc/fsl/qbman/qman_portal.c
index 7fd13f8c8da2..1a987aa2ec8c 100644
--- a/drivers/soc/fsl/qbman/qman_portal.c
+++ b/drivers/soc/fsl/qbman/qman_portal.c
@@ -39,6 +39,7 @@ EXPORT_SYMBOL(qman_dma_portal);
#define CONFIG_FSL_DPA_PIRQ_FAST 1
static struct cpumask portal_cpus;
+static int __qman_portals_probed;
/* protect qman global registers and global data shared among portals */
static DEFINE_SPINLOCK(qman_lock);
@@ -219,6 +220,12 @@ static int qman_online_cpu(unsigned int cpu)
return 0;
}
+int qman_portals_probed(void)
+{
+ return __qman_portals_probed;
+}
+EXPORT_SYMBOL_GPL(qman_portals_probed);
+
static int qman_portal_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -306,6 +313,7 @@ static int qman_portal_probe(struct platform_device *pdev)
spin_lock(&qman_lock);
cpu = cpumask_next_zero(-1, &portal_cpus);
if (cpu >= nr_cpu_ids) {
+ __qman_portals_probed = 1;
/* unassigned portal, skip init */
spin_unlock(&qman_lock);
return 0;
@@ -336,6 +344,8 @@ static int qman_portal_probe(struct platform_device *pdev)
err_ioremap2:
memunmap(pcfg->addr_virt_ce);
err_ioremap1:
+ __qman_portals_probed = -1;
+
return -ENXIO;
}
diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h
index 5b99cb2ea5ef..173e4049d963 100644
--- a/include/soc/fsl/bman.h
+++ b/include/soc/fsl/bman.h
@@ -133,5 +133,13 @@ int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num);
* failed to probe or 0 if the bman driver did not probed yet.
*/
int bman_is_probed(void);
+/**
+ * bman_portals_probed - Check if all cpu bound bman portals are probed
+ *
+ * Returns 1 if all the required cpu bound bman portals successfully probed,
+ * -1 if probe errors appeared or 0 if the bman portals did not yet finished
+ * probing.
+ */
+int bman_portals_probed(void);
#endif /* __FSL_BMAN_H */
diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
index 597783b8a3a0..7732e48081eb 100644
--- a/include/soc/fsl/qman.h
+++ b/include/soc/fsl/qman.h
@@ -1194,4 +1194,13 @@ int qman_release_cgrid(u32 id);
*/
int qman_is_probed(void);
+/**
+ * qman_portals_probed - Check if all cpu bound qman portals are probed
+ *
+ * Returns 1 if all the required cpu bound qman portals successfully probed,
+ * -1 if probe errors appeared or 0 if the qman portals did not yet finished
+ * probing.
+ */
+int qman_portals_probed(void);
+
#endif /* __FSL_QMAN_H */
--
2.17.1
^ permalink raw reply related
* [PATCH 09/21] fsl/fman: backup and restore ICID registers
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
During probing, FMAN is reset thus losing all its register
settings. Backup port ICID registers before reset and restore
them after, similarly to how it's done on powerpc / PAMU based
platforms.
This also has the side effect of disabling the old code path
(liodn backup/restore handling) that obviously make no sense
in the context of SMMU on ARMs.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/net/ethernet/freescale/fman/fman.c | 35 +++++++++++++++++++++-
drivers/net/ethernet/freescale/fman/fman.h | 4 +++
2 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c
index c415ac67cb7b..8f9136892d98 100644
--- a/drivers/net/ethernet/freescale/fman/fman.c
+++ b/drivers/net/ethernet/freescale/fman/fman.c
@@ -629,6 +629,7 @@ static void set_port_order_restoration(struct fman_fpm_regs __iomem *fpm_rg,
iowrite32be(tmp, &fpm_rg->fmfp_prc);
}
+#ifdef CONFIG_PPC
static void set_port_liodn(struct fman *fman, u8 port_id,
u32 liodn_base, u32 liodn_ofst)
{
@@ -646,6 +647,27 @@ static void set_port_liodn(struct fman *fman, u8 port_id,
iowrite32be(tmp, &fman->dma_regs->fmdmplr[port_id / 2]);
iowrite32be(liodn_ofst, &fman->bmi_regs->fmbm_spliodn[port_id - 1]);
}
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+static void save_restore_port_icids(struct fman *fman, bool save)
+{
+ int port_idxes[] = {
+ 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc,
+ 0xd, 0xe, 0xf, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ 0x10, 0x11, 0x30, 0x31
+ };
+ int idx, i;
+
+ for (i = 0; i < ARRAY_SIZE(port_idxes); i++) {
+ idx = port_idxes[i];
+ if (save)
+ fman->sp_icids[idx] =
+ ioread32be(&fman->bmi_regs->fmbm_spliodn[idx]);
+ else
+ iowrite32be(fman->sp_icids[idx],
+ &fman->bmi_regs->fmbm_spliodn[idx]);
+ }
+}
+#endif
static void enable_rams_ecc(struct fman_fpm_regs __iomem *fpm_rg)
{
@@ -1914,7 +1936,10 @@ static int fman_reset(struct fman *fman)
static int fman_init(struct fman *fman)
{
struct fman_cfg *cfg = NULL;
- int err = 0, i, count;
+ int err = 0, count;
+#ifdef CONFIG_PPC
+ int i;
+#endif
if (is_init_done(fman->cfg))
return -EINVAL;
@@ -1934,6 +1959,7 @@ static int fman_init(struct fman *fman)
memset_io((void __iomem *)(fman->base_addr + CGP_OFFSET), 0,
fman->state->fm_port_num_of_cg);
+#ifdef CONFIG_PPC
/* Save LIODN info before FMan reset
* Skipping non-existent port 0 (i = 1)
*/
@@ -1953,6 +1979,9 @@ static int fman_init(struct fman *fman)
}
fman->liodn_base[i] = liodn_base;
}
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+ save_restore_port_icids(fman, true);
+#endif
err = fman_reset(fman);
if (err)
@@ -2181,8 +2210,12 @@ int fman_set_port_params(struct fman *fman,
if (err)
goto return_err;
+#ifdef CONFIG_PPC
set_port_liodn(fman, port_id, fman->liodn_base[port_id],
fman->liodn_offset[port_id]);
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+ save_restore_port_icids(fman, false);
+#endif
if (fman->state->rev_info.major < 6)
set_port_order_restoration(fman->fpm_regs, port_id);
diff --git a/drivers/net/ethernet/freescale/fman/fman.h b/drivers/net/ethernet/freescale/fman/fman.h
index 935c317fa696..19f20fa58053 100644
--- a/drivers/net/ethernet/freescale/fman/fman.h
+++ b/drivers/net/ethernet/freescale/fman/fman.h
@@ -346,8 +346,12 @@ struct fman {
unsigned long fifo_offset;
size_t fifo_size;
+#ifdef CONFIG_PPC
u32 liodn_base[64];
u32 liodn_offset[64];
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+ u32 sp_icids[64];
+#endif
struct fman_dts_params dts_params;
};
--
2.17.1
^ permalink raw reply related
* [PATCH 10/21] fsl/fman: add API to get the device behind a fman port
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Add an API that retrieves the 'struct device' that the specified fman
port probed against. The new API will be used in a subsequent iommu
enablement related patch.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/net/ethernet/freescale/fman/fman_port.c | 14 ++++++++++++++
drivers/net/ethernet/freescale/fman/fman_port.h | 2 ++
2 files changed, 16 insertions(+)
diff --git a/drivers/net/ethernet/freescale/fman/fman_port.c b/drivers/net/ethernet/freescale/fman/fman_port.c
index ee82ee1384eb..bd76c9730692 100644
--- a/drivers/net/ethernet/freescale/fman/fman_port.c
+++ b/drivers/net/ethernet/freescale/fman/fman_port.c
@@ -1728,6 +1728,20 @@ u32 fman_port_get_qman_channel_id(struct fman_port *port)
}
EXPORT_SYMBOL(fman_port_get_qman_channel_id);
+/**
+ * fman_port_get_device
+ * port: Pointer to the FMan port device
+ *
+ * Get the 'struct device' associated to the specified FMan port device
+ *
+ * Return: pointer to associated 'struct device'
+ */
+struct device *fman_port_get_device(struct fman_port *port)
+{
+ return port->dev;
+}
+EXPORT_SYMBOL(fman_port_get_device);
+
int fman_port_get_hash_result_offset(struct fman_port *port, u32 *offset)
{
if (port->buffer_offsets.hash_result_offset == ILLEGAL_BASE)
diff --git a/drivers/net/ethernet/freescale/fman/fman_port.h b/drivers/net/ethernet/freescale/fman/fman_port.h
index 9dbb69f40121..82f12661a46d 100644
--- a/drivers/net/ethernet/freescale/fman/fman_port.h
+++ b/drivers/net/ethernet/freescale/fman/fman_port.h
@@ -157,4 +157,6 @@ int fman_port_get_tstamp(struct fman_port *port, const void *data, u64 *tstamp);
struct fman_port *fman_port_bind(struct device *dev);
+struct device *fman_port_get_device(struct fman_port *port);
+
#endif /* __FMAN_PORT_H */
--
2.17.1
^ permalink raw reply related
* [PATCH 12/21] dpaa_eth: base dma mappings on the fman rx port
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
The dma transactions initiator is the rx fman port so that's the device
that the dma mappings should be done. Previously the mappings were done
through the MAC device which makes no sense because it's neither dma-able
nor connected in any way to smmu.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 6ca3fdbef580..ac9e50c8a556 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2796,8 +2796,15 @@ static int dpaa_eth_probe(struct platform_device *pdev)
return -ENODEV;
}
+ mac_dev = dpaa_mac_dev_get(pdev);
+ if (IS_ERR(mac_dev)) {
+ dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n");
+ err = PTR_ERR(mac_dev);
+ goto probe_err;
+ }
+
/* device used for DMA mapping */
- dev = pdev->dev.parent;
+ dev = fman_port_get_device(mac_dev->port[RX]);
err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
if (err) {
dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
@@ -2822,13 +2829,6 @@ static int dpaa_eth_probe(struct platform_device *pdev)
priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
- mac_dev = dpaa_mac_dev_get(pdev);
- if (IS_ERR(mac_dev)) {
- dev_err(dev, "dpaa_mac_dev_get() failed\n");
- err = PTR_ERR(mac_dev);
- goto free_netdev;
- }
-
/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
* we choose conservatively and let the user explicitly set a higher
* MTU via ifconfig. Otherwise, the user may end up with different MTUs
@@ -2964,9 +2964,9 @@ static int dpaa_eth_probe(struct platform_device *pdev)
qman_release_cgrid(priv->cgr_data.cgr.cgrid);
free_dpaa_bps:
dpaa_bps_free(priv);
-free_netdev:
dev_set_drvdata(dev, NULL);
free_netdev(net_dev);
+probe_err:
return err;
}
--
2.17.1
^ permalink raw reply related
* [PATCH 13/21] dpaa_eth: fix iova handling for contiguous frames
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
The driver relies on the no longer valid assumption that dma addresses
(iovas) are identical to physical addressees and uses phys_to_virt() to
make iova -> vaddr conversions. Fix this by adding a function that does
proper iova -> phys conversions using the iommu api and update the code
to use it.
Also, a dma_unmap_single() call had to be moved further down the code
because iova -> vaddr conversions were required before the unmap.
For now only the contiguous frame case is handled and the SG case is
split in a following patch.
While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
as parameter.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
.../net/ethernet/freescale/dpaa/dpaa_eth.c | 44 ++++++++++---------
1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index ac9e50c8a556..e9e081c3f8cc 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -50,6 +50,7 @@
#include <linux/highmem.h>
#include <linux/percpu.h>
#include <linux/dma-mapping.h>
+#include <linux/iommu.h>
#include <linux/sort.h>
#include <soc/fsl/bman.h>
#include <soc/fsl/qman.h>
@@ -1595,6 +1596,17 @@ static int dpaa_eth_refill_bpools(struct dpaa_priv *priv)
return 0;
}
+static phys_addr_t dpaa_iova_to_phys(struct device *dev, dma_addr_t addr)
+{
+ struct iommu_domain *domain;
+
+ domain = iommu_get_domain_for_dev(dev);
+ if (domain)
+ return iommu_iova_to_phys(domain, addr);
+ else
+ return addr;
+}
+
/* Cleanup function for outgoing frame descriptors that were built on Tx path,
* either contiguous frames or scatter/gather ones.
* Skb freeing is not handled here.
@@ -1617,7 +1629,7 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
int nr_frags, i;
u64 ns;
- skbh = (struct sk_buff **)phys_to_virt(addr);
+ skbh = (struct sk_buff **)phys_to_virt(dpaa_iova_to_phys(dev, addr));
skb = *skbh;
if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
@@ -1687,25 +1699,21 @@ static u8 rx_csum_offload(const struct dpaa_priv *priv, const struct qm_fd *fd)
* accommodate the shared info area of the skb.
*/
static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
- const struct qm_fd *fd)
+ const struct qm_fd *fd,
+ struct dpaa_bp *dpaa_bp,
+ void *vaddr)
{
ssize_t fd_off = qm_fd_get_offset(fd);
- dma_addr_t addr = qm_fd_addr(fd);
- struct dpaa_bp *dpaa_bp;
struct sk_buff *skb;
- void *vaddr;
- vaddr = phys_to_virt(addr);
WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
- dpaa_bp = dpaa_bpid2pool(fd->bpid);
- if (!dpaa_bp)
- goto free_buffer;
-
skb = build_skb(vaddr, dpaa_bp->size +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
- if (WARN_ONCE(!skb, "Build skb failure on Rx\n"))
- goto free_buffer;
+ if (WARN_ONCE(!skb, "Build skb failure on Rx\n")) {
+ skb_free_frag(vaddr);
+ return NULL;
+ }
WARN_ON(fd_off != priv->rx_headroom);
skb_reserve(skb, fd_off);
skb_put(skb, qm_fd_get_length(fd));
@@ -1713,10 +1721,6 @@ static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
skb->ip_summed = rx_csum_offload(priv, fd);
return skb;
-
-free_buffer:
- skb_free_frag(vaddr);
- return NULL;
}
/* Build an skb with the data of the first S/G entry in the linear portion and
@@ -2302,12 +2306,12 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
if (!dpaa_bp)
return qman_cb_dqrr_consume;
- dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
-
/* prefetch the first 64 bytes of the frame or the SGT start */
- vaddr = phys_to_virt(addr);
+ vaddr = phys_to_virt(dpaa_iova_to_phys(dpaa_bp->dev, addr));
prefetch(vaddr + qm_fd_get_offset(fd));
+ dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
+
/* The only FD types that we may receive are contig and S/G */
WARN_ON((fd_format != qm_fd_contig) && (fd_format != qm_fd_sg));
@@ -2318,7 +2322,7 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
(*count_ptr)--;
if (likely(fd_format == qm_fd_contig))
- skb = contig_fd_to_skb(priv, fd);
+ skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr);
else
skb = sg_fd_to_skb(priv, fd);
if (!skb)
--
2.17.1
^ permalink raw reply related
* [PATCH 15/21] dpaa_eth: fix SG frame cleanup
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 8db861f281a0..605f06f0def8 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -1663,7 +1663,7 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
qm_sg_entry_get_len(&sgt[0]), dma_dir);
/* remaining pages were mapped with skb_frag_dma_map() */
- for (i = 1; i < nr_frags; i++) {
+ for (i = 1; i <= nr_frags; i++) {
WARN_ON(qm_sg_entry_is_ext(&sgt[i]));
dma_unmap_page(dev, qm_sg_addr(&sgt[i]),
--
2.17.1
^ permalink raw reply related
* [PATCH 16/21] arm64: dts: ls1046a: add smmu node
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
This allows for the SMMU device to be probed by the SMMU kernel driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b90..06863d3e4a7d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -228,6 +228,48 @@
bus-width = <4>;
};
+ mmu: iommu@9000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x9000000 0 0x400000>;
+ dma-coherent;
+ #global-interrupts = <2>;
+ #iommu-cells = <1>;
+ interrupts = <0 142 4>, /* global secure fault */
+ <0 143 4>, /* combined secure interrupt */
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>;
+ };
+
scfg: scfg@1570000 {
compatible = "fsl,ls1046a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
--
2.17.1
^ permalink raw reply related
* [PATCH 17/21] arm64: dts: ls1043a: add smmu node
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
This allows for the SMMU device to be probed by the SMMU kernel driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9a..8b3eba167508 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -222,6 +222,48 @@
clocks = <&sysclk>;
};
+ mmu: iommu@9000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x9000000 0 0x400000>;
+ dma-coherent;
+ #global-interrupts = <2>;
+ #iommu-cells = <1>;
+ interrupts = <0 142 4>, /* global secure fault */
+ <0 143 4>, /* combined secure interrupt */
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>,
+ <0 142 4>;
+ };
+
scfg: scfg@1570000 {
compatible = "fsl,ls1043a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
--
2.17.1
^ permalink raw reply related
* [PATCH 18/21] arm64: dts: ls104xa: set mask to drop TBU ID from StreamID
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
The StreamID entering the SMMU is actually a concatenation of the
SMMU TBU ID and the ICID configured in software.
Since the TBU ID is internal to the SoC and since we want that the
actual the ICID configured in software to enter the SMMU witout any
additional set bits, mask out the TBU ID bits and leave only the
relevant ICID bits to enter SMMU.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 8b3eba167508..90296b9fb171 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -226,6 +226,7 @@
compatible = "arm,mmu-500";
reg = <0 0x9000000 0 0x400000>;
dma-coherent;
+ stream-match-mask = <0x7f00>;
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupts = <0 142 4>, /* global secure fault */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 06863d3e4a7d..15094dd8400e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -232,6 +232,7 @@
compatible = "arm,mmu-500";
reg = <0 0x9000000 0 0x400000>;
dma-coherent;
+ stream-match-mask = <0x7f00>;
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupts = <0 142 4>, /* global secure fault */
--
2.17.1
^ permalink raw reply related
* [PATCH 19/21] arm64: dts: ls104x: add missing dma ranges property
From: laurentiu.tudor @ 2018-09-19 12:36 UTC (permalink / raw)
To: devicetree, netdev, linux-kernel, linux-arm-kernel
Cc: roy.pledge, madalin.bucur, davem, shawnguo, leoyang.li,
Laurentiu Tudor
In-Reply-To: <20180919123613.15092-1-laurentiu.tudor@nxp.com>
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
These chips have a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set
the default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 90296b9fb171..48091409c472 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -214,6 +214,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 15094dd8400e..40484f6f6d42 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -187,6 +187,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
--
2.17.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox