* [PATCH AUTOSEL 4.9 4/8] ppp: mppe: Add softdep to arc4
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Takashi Iwai, David S . Miller, Sasha Levin, linux-ppp, netdev
In-Reply-To: <20190703021847.18542-1-sashal@kernel.org>
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit aad1dcc4f011ea409850e040363dff1e59aa4175 ]
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a
softdep line, so that the corresponding module gets prepared
gracefully. Without this, a simple inclusion to initrd via dracut
failed due to the missing dependency, for example.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ppp/ppp_mppe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index f60f7660b451..92f52a73ec0e 100644
--- a/drivers/net/ppp/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
@@ -63,6 +63,7 @@ MODULE_AUTHOR("Frank Cusack <fcusack@fcusack.com>");
MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
+MODULE_SOFTDEP("pre: arc4");
MODULE_VERSION("1.0.2");
static unsigned int
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 5/8] net: stmmac: fixed new system time seconds value calculation
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Roland Hii, Ong Boon Leong, Voon Weifeng, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190703021847.18542-1-sashal@kernel.org>
From: Roland Hii <roland.king.guan.hii@intel.com>
[ Upstream commit a1e5388b4d5fc78688e5e9ee6641f779721d6291 ]
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index f4074e25fb71..25136941a964 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -125,7 +125,7 @@ static int stmmac_adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec,
* programmed with (2^32 – <new_sec_value>)
*/
if (gmac4)
- sec = (100000000ULL - sec);
+ sec = -sec;
value = readl(ioaddr + PTP_TCR);
if (value & PTP_TCR_TSCTRLSSR)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 6/8] sis900: fix TX completion
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sergej Benilov, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190703021847.18542-1-sashal@kernel.org>
From: Sergej Benilov <sergej.benilov@googlemail.com>
[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test:
netperf
before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/sis/sis900.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 6f85276376e8..ae9b983e8e5c 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1058,7 +1058,7 @@ sis900_open(struct net_device *net_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
@@ -1581,7 +1581,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
sw32(txdp, sis_priv->tx_ring_dma);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
}
/**
@@ -1621,7 +1621,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
spin_unlock_irqrestore(&sis_priv->lock, flags);
return NETDEV_TX_OK;
}
- sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+ sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len);
sw32(cr, TxENA | sr32(cr));
sis_priv->cur_tx ++;
@@ -1677,7 +1677,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
do {
status = sr32(isr);
- if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+ if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0)
/* nothing intresting happened */
break;
handled = 1;
@@ -1687,7 +1687,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
/* Rx interrupt */
sis900_rx(net_dev);
- if (status & (TxURN | TxERR | TxIDLE))
+ if (status & (TxURN | TxERR | TxIDLE | TxDESC))
/* Tx interrupt */
sis900_finish_xmit(net_dev);
@@ -1899,8 +1899,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
if (tx_status & OWN) {
/* The packet is not transmitted yet (owned by hardware) !
- * Note: the interrupt is generated only when Tx Machine
- * is idle, so this is an almost impossible case */
+ * Note: this is an almost impossible condition
+ * in case of TxDESC ('descriptor interrupt') */
break;
}
@@ -2476,7 +2476,7 @@ static int sis900_resume(struct pci_dev *pci_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.4 4/6] ppp: mppe: Add softdep to arc4
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Takashi Iwai, David S . Miller, Sasha Levin, linux-ppp, netdev
In-Reply-To: <20190703021858.18653-1-sashal@kernel.org>
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit aad1dcc4f011ea409850e040363dff1e59aa4175 ]
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a
softdep line, so that the corresponding module gets prepared
gracefully. Without this, a simple inclusion to initrd via dracut
failed due to the missing dependency, for example.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ppp/ppp_mppe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index 05005c660d4d..6376edd89ceb 100644
--- a/drivers/net/ppp/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
@@ -62,6 +62,7 @@ MODULE_AUTHOR("Frank Cusack <fcusack@fcusack.com>");
MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
+MODULE_SOFTDEP("pre: arc4");
MODULE_VERSION("1.0.2");
static unsigned int
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.4 5/6] sis900: fix TX completion
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sergej Benilov, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190703021858.18653-1-sashal@kernel.org>
From: Sergej Benilov <sergej.benilov@googlemail.com>
[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test:
netperf
before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/sis/sis900.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index fd812d2e5e1c..dff5b56738d3 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1058,7 +1058,7 @@ sis900_open(struct net_device *net_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
@@ -1581,7 +1581,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
sw32(txdp, sis_priv->tx_ring_dma);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
}
/**
@@ -1621,7 +1621,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
spin_unlock_irqrestore(&sis_priv->lock, flags);
return NETDEV_TX_OK;
}
- sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+ sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len);
sw32(cr, TxENA | sr32(cr));
sis_priv->cur_tx ++;
@@ -1677,7 +1677,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
do {
status = sr32(isr);
- if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+ if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0)
/* nothing intresting happened */
break;
handled = 1;
@@ -1687,7 +1687,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
/* Rx interrupt */
sis900_rx(net_dev);
- if (status & (TxURN | TxERR | TxIDLE))
+ if (status & (TxURN | TxERR | TxIDLE | TxDESC))
/* Tx interrupt */
sis900_finish_xmit(net_dev);
@@ -1899,8 +1899,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
if (tx_status & OWN) {
/* The packet is not transmitted yet (owned by hardware) !
- * Note: the interrupt is generated only when Tx Machine
- * is idle, so this is an almost impossible case */
+ * Note: this is an almost impossible condition
+ * in case of TxDESC ('descriptor interrupt') */
break;
}
@@ -2476,7 +2476,7 @@ static int sis900_resume(struct pci_dev *pci_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.4 3/6] be2net: fix link failure after ethtool offline test
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Petr Oros, Ivan Vecera, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190703021858.18653-1-sashal@kernel.org>
From: Petr Oros <poros@redhat.com>
[ Upstream commit 2e5db6eb3c23e5dc8171eb8f6af7a97ef9fcf3a9 ]
Certain cards in conjunction with certain switches need a little more
time for link setup that results in ethtool link test failure after
offline test. Patch adds a loop that waits for a link setup finish.
Changes in v2:
- added fixes header
Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/emulex/benet/be_ethtool.c | 28 +++++++++++++++----
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 51bfe74be8d4..4e5646b3da09 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -868,7 +868,7 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
u64 *data)
{
struct be_adapter *adapter = netdev_priv(netdev);
- int status;
+ int status, cnt;
u8 link_status = 0;
if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
@@ -879,6 +879,9 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
+ /* check link status before offline tests */
+ link_status = netif_carrier_ok(netdev);
+
if (test->flags & ETH_TEST_FL_OFFLINE) {
if (be_loopback_test(adapter, BE_MAC_LOOPBACK, &data[0]) != 0)
test->flags |= ETH_TEST_FL_FAILED;
@@ -899,13 +902,26 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
test->flags |= ETH_TEST_FL_FAILED;
}
- status = be_cmd_link_status_query(adapter, NULL, &link_status, 0);
- if (status) {
- test->flags |= ETH_TEST_FL_FAILED;
- data[4] = -1;
- } else if (!link_status) {
+ /* link status was down prior to test */
+ if (!link_status) {
test->flags |= ETH_TEST_FL_FAILED;
data[4] = 1;
+ return;
+ }
+
+ for (cnt = 10; cnt; cnt--) {
+ status = be_cmd_link_status_query(adapter, NULL, &link_status,
+ 0);
+ if (status) {
+ test->flags |= ETH_TEST_FL_FAILED;
+ data[4] = -1;
+ break;
+ }
+
+ if (link_status)
+ break;
+
+ msleep_interruptible(500);
}
}
--
2.20.1
^ permalink raw reply related
* Re: [PATCH net-next v5 0/5] Add MPLS actions to TC
From: Willem de Bruijn @ 2019-07-03 2:18 UTC (permalink / raw)
To: John Hurley
Cc: Network Development, David Miller, jiri, Cong Wang, David Ahern,
Willem de Bruijn, simon.horman, Jakub Kicinski, oss-drivers
In-Reply-To: <1562113531-29296-1-git-send-email-john.hurley@netronome.com>
On Tue, Jul 2, 2019 at 8:32 PM John Hurley <john.hurley@netronome.com> wrote:
>
> This patchset introduces a new TC action module that allows the
> manipulation of the MPLS headers of packets. The code impliments
> functionality including push, pop, and modify.
>
> Also included are tests for the new funtionality. Note that these will
> require iproute2 changes to be submitted soon.
>
> NOTE: these patches are applied to net-next along with the patch:
> [PATCH net 1/1] net: openvswitch: fix csum updates for MPLS actions
> This patch has been accepted into net but, at time of posting, is not yet
> in net-next.
>
> v4-v5:
> - move mpls_hdr() call to after skb_ensure_writable - patch 3
> (Willem de Bruijn)
> - move mpls_dec_ttl to helper - patch 4 (Willem de Bruijn)
> - add iproute2 usage example to commit msg - patch 4 (David Ahern)
> - align label validation with mpls core code - patch 4 (David Ahern)
> - improve extack message for no proto in mpls pop - patch 4 (David Ahern)
> v3-v4:
> - refactor and reuse OvS code (Cong Wang)
> - use csum API rather than skb_post*rscum to update skb->csum (Cong Wang)
> - remove unnecessary warning (Cong Wang)
> - add comments to uapi attributes (David Ahern)
> - set strict type policy check for TCA_MPLS_UNSPEC (David Ahern)
> - expand/improve extack messages (David Ahern)
> - add option to manually set BOS
> v2-v3:
> - remove a few unnecessary line breaks (Jiri Pirko)
> - retract hw offload patch from set (resubmit with driver changes) (Jiri)
> v1->v2:
> - ensure TCA_ID_MPLS does not conflict with TCA_ID_CTINFO (Davide Caratti)
>
> John Hurley (5):
> net: core: move push MPLS functionality from OvS to core helper
> net: core: move pop MPLS functionality from OvS to core helper
> net: core: add MPLS update core helper and use in OvS
> net: sched: add mpls manipulation actions to TC
> selftests: tc-tests: actions: add MPLS tests
Reviewed-by: Willem de Bruijn <willemb@google.com>
I did have some conflicts applying the patches from patchwork (to diff
v4 vs v5). Might be my process. This is clean against net-next, right?
^ permalink raw reply
* [PATCH AUTOSEL 4.14 07/13] net: stmmac: fixed new system time seconds value calculation
From: Sasha Levin @ 2019-07-03 2:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Roland Hii, Ong Boon Leong, Voon Weifeng, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190703021814.18385-1-sashal@kernel.org>
From: Roland Hii <roland.king.guan.hii@intel.com>
[ Upstream commit a1e5388b4d5fc78688e5e9ee6641f779721d6291 ]
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 08c19ebd5306..41d528fbebb4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -121,7 +121,7 @@ static int stmmac_adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec,
* programmed with (2^32 – <new_sec_value>)
*/
if (gmac4)
- sec = (100000000ULL - sec);
+ sec = -sec;
value = readl(ioaddr + PTP_TCR);
if (value & PTP_TCR_TSCTRLSSR)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 10/26] ppp: mppe: Add softdep to arc4
From: Sasha Levin @ 2019-07-03 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Takashi Iwai, David S . Miller, Sasha Levin, linux-ppp, netdev
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit aad1dcc4f011ea409850e040363dff1e59aa4175 ]
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a
softdep line, so that the corresponding module gets prepared
gracefully. Without this, a simple inclusion to initrd via dracut
failed due to the missing dependency, for example.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ppp/ppp_mppe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index a205750b431b..8609c1a0777b 100644
--- a/drivers/net/ppp/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
@@ -63,6 +63,7 @@ MODULE_AUTHOR("Frank Cusack <fcusack@fcusack.com>");
MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
+MODULE_SOFTDEP("pre: arc4");
MODULE_VERSION("1.0.2");
static unsigned int
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 13/26] sis900: fix TX completion
From: Sasha Levin @ 2019-07-03 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sergej Benilov, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>
From: Sergej Benilov <sergej.benilov@googlemail.com>
[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test:
netperf
before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/sis/sis900.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 4bb89f74742c..d5bcbc40a55f 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1057,7 +1057,7 @@ sis900_open(struct net_device *net_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
@@ -1578,7 +1578,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
sw32(txdp, sis_priv->tx_ring_dma);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
}
/**
@@ -1618,7 +1618,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
spin_unlock_irqrestore(&sis_priv->lock, flags);
return NETDEV_TX_OK;
}
- sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+ sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len);
sw32(cr, TxENA | sr32(cr));
sis_priv->cur_tx ++;
@@ -1674,7 +1674,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
do {
status = sr32(isr);
- if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+ if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0)
/* nothing intresting happened */
break;
handled = 1;
@@ -1684,7 +1684,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
/* Rx interrupt */
sis900_rx(net_dev);
- if (status & (TxURN | TxERR | TxIDLE))
+ if (status & (TxURN | TxERR | TxIDLE | TxDESC))
/* Tx interrupt */
sis900_finish_xmit(net_dev);
@@ -1896,8 +1896,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
if (tx_status & OWN) {
/* The packet is not transmitted yet (owned by hardware) !
- * Note: the interrupt is generated only when Tx Machine
- * is idle, so this is an almost impossible case */
+ * Note: this is an almost impossible condition
+ * in case of TxDESC ('descriptor interrupt') */
break;
}
@@ -2473,7 +2473,7 @@ static int sis900_resume(struct pci_dev *pci_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 12/26] net: stmmac: set IC bit when transmitting frames with HW timestamp
From: Sasha Levin @ 2019-07-03 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Roland Hii, Ong Boon Leong, Voon Weifeng, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>
From: Roland Hii <roland.king.guan.hii@intel.com>
[ Upstream commit d0bb82fd60183868f46c8ccc595a3d61c3334a18 ]
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.
This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.
Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++++++++++++-------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 45e64d71a93f..5c18874614ba 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2938,12 +2938,15 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
/* Manage tx mitigation */
tx_q->tx_count_frames += nfrags + 1;
- if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+ (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
- tx_q->tx_count_frames = 0;
- } else {
- stmmac_tx_timer_arm(priv, queue);
}
skb_tx_timestamp(skb);
@@ -3157,12 +3160,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
* element in case of no SG.
*/
tx_q->tx_count_frames += nfrags + 1;
- if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+ (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
- tx_q->tx_count_frames = 0;
- } else {
- stmmac_tx_timer_arm(priv, queue);
}
skb_tx_timestamp(skb);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 11/26] net: stmmac: fixed new system time seconds value calculation
From: Sasha Levin @ 2019-07-03 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Roland Hii, Ong Boon Leong, Voon Weifeng, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>
From: Roland Hii <roland.king.guan.hii@intel.com>
[ Upstream commit a1e5388b4d5fc78688e5e9ee6641f779721d6291 ]
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 8d9cc2157afd..7423262ce590 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -122,7 +122,7 @@ static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec,
* programmed with (2^32 – <new_sec_value>)
*/
if (gmac4)
- sec = (100000000ULL - sec);
+ sec = -sec;
value = readl(ioaddr + PTP_TCR);
if (value & PTP_TCR_TSCTRLSSR)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 15/26] qmi_wwan: Fix out-of-bounds read
From: Sasha Levin @ 2019-07-03 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Bjørn Mork, syzbot+b68605d7fadd21510de1, Kristian Evensen,
David S . Miller, Sasha Levin, netdev, linux-usb
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>
From: Bjørn Mork <bjorn@mork.no>
[ Upstream commit 904d88d743b0c94092c5117955eab695df8109e8 ]
The syzbot reported
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x67/0x231 mm/kasan/report.c:188
__kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
kasan_report+0xe/0x20 mm/kasan/common.c:614
qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x660 drivers/base/dd.c:509
driver_probe_device+0x104/0x210 drivers/base/dd.c:670
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
Caused by too many confusing indirections and casts.
id->driver_info is a pointer stored in a long. We want the
pointer here, not the address of it.
Thanks-to: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/qmi_wwan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index d9a6699abe59..e657d8947125 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1412,7 +1412,7 @@ static int qmi_wwan_probe(struct usb_interface *intf,
* different. Ignore the current interface if the number of endpoints
* equals the number for the diag interface (two).
*/
- info = (void *)&id->driver_info;
+ info = (void *)id->driver_info;
if (info->data & QMI_WWAN_QUIRK_QUECTEL_DYNCFG) {
if (desc->bNumEndpoints == 2)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 09/26] be2net: fix link failure after ethtool offline test
From: Sasha Levin @ 2019-07-03 2:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Petr Oros, Ivan Vecera, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190703021625.18116-1-sashal@kernel.org>
From: Petr Oros <poros@redhat.com>
[ Upstream commit 2e5db6eb3c23e5dc8171eb8f6af7a97ef9fcf3a9 ]
Certain cards in conjunction with certain switches need a little more
time for link setup that results in ethtool link test failure after
offline test. Patch adds a loop that waits for a link setup finish.
Changes in v2:
- added fixes header
Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/emulex/benet/be_ethtool.c | 28 +++++++++++++++----
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index bfb16a474490..d1905d50c26c 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -895,7 +895,7 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
u64 *data)
{
struct be_adapter *adapter = netdev_priv(netdev);
- int status;
+ int status, cnt;
u8 link_status = 0;
if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
@@ -906,6 +906,9 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
+ /* check link status before offline tests */
+ link_status = netif_carrier_ok(netdev);
+
if (test->flags & ETH_TEST_FL_OFFLINE) {
if (be_loopback_test(adapter, BE_MAC_LOOPBACK, &data[0]) != 0)
test->flags |= ETH_TEST_FL_FAILED;
@@ -926,13 +929,26 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
test->flags |= ETH_TEST_FL_FAILED;
}
- status = be_cmd_link_status_query(adapter, NULL, &link_status, 0);
- if (status) {
- test->flags |= ETH_TEST_FL_FAILED;
- data[4] = -1;
- } else if (!link_status) {
+ /* link status was down prior to test */
+ if (!link_status) {
test->flags |= ETH_TEST_FL_FAILED;
data[4] = 1;
+ return;
+ }
+
+ for (cnt = 10; cnt; cnt--) {
+ status = be_cmd_link_status_query(adapter, NULL, &link_status,
+ 0);
+ if (status) {
+ test->flags |= ETH_TEST_FL_FAILED;
+ data[4] = -1;
+ break;
+ }
+
+ if (link_status)
+ break;
+
+ msleep_interruptible(500);
}
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 19/39] net: stmmac: set IC bit when transmitting frames with HW timestamp
From: Sasha Levin @ 2019-07-03 2:14 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Roland Hii, Ong Boon Leong, Voon Weifeng, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190703021514.17727-1-sashal@kernel.org>
From: Roland Hii <roland.king.guan.hii@intel.com>
[ Upstream commit d0bb82fd60183868f46c8ccc595a3d61c3334a18 ]
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.
This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.
Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++++++++++++-------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 635d88d82610..a634054dcb11 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2957,12 +2957,15 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
/* Manage tx mitigation */
tx_q->tx_count_frames += nfrags + 1;
- if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+ (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
- tx_q->tx_count_frames = 0;
- } else {
- stmmac_tx_timer_arm(priv, queue);
}
skb_tx_timestamp(skb);
@@ -3176,12 +3179,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
* element in case of no SG.
*/
tx_q->tx_count_frames += nfrags + 1;
- if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+ (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
- tx_q->tx_count_frames = 0;
- } else {
- stmmac_tx_timer_arm(priv, queue);
}
skb_tx_timestamp(skb);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 18/39] net: stmmac: fixed new system time seconds value calculation
From: Sasha Levin @ 2019-07-03 2:14 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Roland Hii, Ong Boon Leong, Voon Weifeng, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190703021514.17727-1-sashal@kernel.org>
From: Roland Hii <roland.king.guan.hii@intel.com>
[ Upstream commit a1e5388b4d5fc78688e5e9ee6641f779721d6291 ]
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 8d9cc2157afd..7423262ce590 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -122,7 +122,7 @@ static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec,
* programmed with (2^32 – <new_sec_value>)
*/
if (gmac4)
- sec = (100000000ULL - sec);
+ sec = -sec;
value = readl(ioaddr + PTP_TCR);
if (value & PTP_TCR_TSCTRLSSR)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 16/39] be2net: fix link failure after ethtool offline test
From: Sasha Levin @ 2019-07-03 2:14 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Petr Oros, Ivan Vecera, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190703021514.17727-1-sashal@kernel.org>
From: Petr Oros <poros@redhat.com>
[ Upstream commit 2e5db6eb3c23e5dc8171eb8f6af7a97ef9fcf3a9 ]
Certain cards in conjunction with certain switches need a little more
time for link setup that results in ethtool link test failure after
offline test. Patch adds a loop that waits for a link setup finish.
Changes in v2:
- added fixes header
Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/emulex/benet/be_ethtool.c | 28 +++++++++++++++----
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 6e635debc7fd..cfa01efa5b48 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -895,7 +895,7 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
u64 *data)
{
struct be_adapter *adapter = netdev_priv(netdev);
- int status;
+ int status, cnt;
u8 link_status = 0;
if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
@@ -906,6 +906,9 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
+ /* check link status before offline tests */
+ link_status = netif_carrier_ok(netdev);
+
if (test->flags & ETH_TEST_FL_OFFLINE) {
if (be_loopback_test(adapter, BE_MAC_LOOPBACK, &data[0]) != 0)
test->flags |= ETH_TEST_FL_FAILED;
@@ -926,13 +929,26 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
test->flags |= ETH_TEST_FL_FAILED;
}
- status = be_cmd_link_status_query(adapter, NULL, &link_status, 0);
- if (status) {
- test->flags |= ETH_TEST_FL_FAILED;
- data[4] = -1;
- } else if (!link_status) {
+ /* link status was down prior to test */
+ if (!link_status) {
test->flags |= ETH_TEST_FL_FAILED;
data[4] = 1;
+ return;
+ }
+
+ for (cnt = 10; cnt; cnt--) {
+ status = be_cmd_link_status_query(adapter, NULL, &link_status,
+ 0);
+ if (status) {
+ test->flags |= ETH_TEST_FL_FAILED;
+ data[4] = -1;
+ break;
+ }
+
+ if (link_status)
+ break;
+
+ msleep_interruptible(500);
}
}
--
2.20.1
^ permalink raw reply related
* Re: [PATCH net-next v6 11/15] ethtool: provide link mode names as a string set
From: Jakub Kicinski @ 2019-07-03 2:11 UTC (permalink / raw)
To: Michal Kubecek
Cc: David Miller, netdev, Jiri Pirko, Andrew Lunn, Florian Fainelli,
John Linville, Stephen Hemminger, Johannes Berg, linux-kernel
In-Reply-To: <20190702190419.1cb8a189@cakuba.netronome.com>
On Tue, 2 Jul 2019 19:04:19 -0700, Jakub Kicinski wrote:
> On Tue, 2 Jul 2019 13:50:34 +0200 (CEST), Michal Kubecek wrote:
> > +const char *const link_mode_names[] = {
> > + __DEFINE_LINK_MODE_NAME(10, T, Half),
> > + __DEFINE_LINK_MODE_NAME(10, T, Full),
> > + __DEFINE_LINK_MODE_NAME(100, T, Half),
> > + __DEFINE_LINK_MODE_NAME(100, T, Full),
> > + __DEFINE_LINK_MODE_NAME(1000, T, Half),
> > + __DEFINE_LINK_MODE_NAME(1000, T, Full),
> > + __DEFINE_SPECIAL_MODE_NAME(Autoneg, "Autoneg"),
> > + __DEFINE_SPECIAL_MODE_NAME(TP, "TP"),
> > + __DEFINE_SPECIAL_MODE_NAME(AUI, "AUI"),
> > + __DEFINE_SPECIAL_MODE_NAME(MII, "MII"),
> > + __DEFINE_SPECIAL_MODE_NAME(FIBRE, "FIBRE"),
> > + __DEFINE_SPECIAL_MODE_NAME(BNC, "BNC"),
>
> > + __DEFINE_LINK_MODE_NAME(10000, T, Full),
> > + __DEFINE_SPECIAL_MODE_NAME(Pause, "Pause"),
> > + __DEFINE_SPECIAL_MODE_NAME(Asym_Pause, "Asym_Pause"),
> > + __DEFINE_LINK_MODE_NAME(2500, X, Full),
> > + __DEFINE_SPECIAL_MODE_NAME(Backplane, "Backplane"),
> > + __DEFINE_LINK_MODE_NAME(1000, KX, Full),
> ...
> > + __DEFINE_LINK_MODE_NAME(5000, T, Full),
> > + __DEFINE_SPECIAL_MODE_NAME(FEC_NONE, "None"),
> > + __DEFINE_SPECIAL_MODE_NAME(FEC_RS, "RS"),
> > + __DEFINE_SPECIAL_MODE_NAME(FEC_BASER, "BASER"),
>
> Why are port types and FEC params among link mode strings?
Ah, FEC for autoneg, but port type?
> > + __DEFINE_LINK_MODE_NAME(50000, KR, Full),
> ...
> > + __DEFINE_LINK_MODE_NAME(1000, T1, Full),
> > +};
^ permalink raw reply
* RE: [PATCH net-next 1/3] devlink: Introduce PCI PF port flavour and port attribute
From: Parav Pandit @ 2019-07-03 2:08 UTC (permalink / raw)
To: Jakub Kicinski; +Cc: Jiri Pirko, netdev@vger.kernel.org, Saeed Mahameed
In-Reply-To: <20190702164252.6d4fe5e3@cakuba.netronome.com>
> -----Original Message-----
> From: Jakub Kicinski <jakub.kicinski@netronome.com>
> Sent: Wednesday, July 3, 2019 5:13 AM
> To: Parav Pandit <parav@mellanox.com>
> Cc: Jiri Pirko <jiri@mellanox.com>; netdev@vger.kernel.org; Saeed
> Mahameed <saeedm@mellanox.com>
> Subject: Re: [PATCH net-next 1/3] devlink: Introduce PCI PF port flavour and
> port attribute
>
> On Tue, 2 Jul 2019 18:50:31 +0000, Parav Pandit wrote:
> > > > I didn't see any immediate need to report, at the same time didn't
> > > > find any reason to treat such port flavours differently than
> > > > existing one. It just gives a clear view of the device's eswitch.
> > > > Might find it useful during debugging while inspecting device internal
> tables..
> > >
> > > PFs and VFs ports are not tied to network ports in switchdev mode.
> > > You have only one network port under a devlink instance AFAIR, anyway.
> > >
> > I am not sure what do you mean by network port.
>
> DEVLINK_PORT_FLAVOUR_PHYSICAL
>
> > Do you intent to see a physical port that connects to physical network?
> >
> > As I described in the comment of the PF and VF flavour, it is an eswitch
> port.
> > I have shown the diagram also of the eswitch in the cover letter.
> > Port_number doesn't have to a physical port. Flavour describe what
> > port type is and number says what is the eswitch port number.
> > Hope it clarifies.
>
> I understand what you're doing.
o.k.
> If you want to expose some device specific
> eswitch port ID please add a new attribute for that.
> The fact that that ID may match port_number for your device today is
> coincidental. port_number, and split attributes should not be exposed for
> PCI ports.
So your concern is non mellanox hw has eswitch but there may not be a unique handle to identify a eswitch port?
Or that handle may be wider than 32-bit?
And instead of treating port_number as handle, there should be different attribute, is that the ask?
^ permalink raw reply
* Re: [PATCH net-next v6 11/15] ethtool: provide link mode names as a string set
From: Jakub Kicinski @ 2019-07-03 2:04 UTC (permalink / raw)
To: Michal Kubecek
Cc: David Miller, netdev, Jiri Pirko, Andrew Lunn, Florian Fainelli,
John Linville, Stephen Hemminger, Johannes Berg, linux-kernel
In-Reply-To: <1e1bf53de26780ecc0e448aa07dc429ef590798a.1562067622.git.mkubecek@suse.cz>
On Tue, 2 Jul 2019 13:50:34 +0200 (CEST), Michal Kubecek wrote:
> +const char *const link_mode_names[] = {
> + __DEFINE_LINK_MODE_NAME(10, T, Half),
> + __DEFINE_LINK_MODE_NAME(10, T, Full),
> + __DEFINE_LINK_MODE_NAME(100, T, Half),
> + __DEFINE_LINK_MODE_NAME(100, T, Full),
> + __DEFINE_LINK_MODE_NAME(1000, T, Half),
> + __DEFINE_LINK_MODE_NAME(1000, T, Full),
> + __DEFINE_SPECIAL_MODE_NAME(Autoneg, "Autoneg"),
> + __DEFINE_SPECIAL_MODE_NAME(TP, "TP"),
> + __DEFINE_SPECIAL_MODE_NAME(AUI, "AUI"),
> + __DEFINE_SPECIAL_MODE_NAME(MII, "MII"),
> + __DEFINE_SPECIAL_MODE_NAME(FIBRE, "FIBRE"),
> + __DEFINE_SPECIAL_MODE_NAME(BNC, "BNC"),
> + __DEFINE_LINK_MODE_NAME(10000, T, Full),
> + __DEFINE_SPECIAL_MODE_NAME(Pause, "Pause"),
> + __DEFINE_SPECIAL_MODE_NAME(Asym_Pause, "Asym_Pause"),
> + __DEFINE_LINK_MODE_NAME(2500, X, Full),
> + __DEFINE_SPECIAL_MODE_NAME(Backplane, "Backplane"),
> + __DEFINE_LINK_MODE_NAME(1000, KX, Full),
...
> + __DEFINE_LINK_MODE_NAME(5000, T, Full),
> + __DEFINE_SPECIAL_MODE_NAME(FEC_NONE, "None"),
> + __DEFINE_SPECIAL_MODE_NAME(FEC_RS, "RS"),
> + __DEFINE_SPECIAL_MODE_NAME(FEC_BASER, "BASER"),
Why are port types and FEC params among link mode strings?
> + __DEFINE_LINK_MODE_NAME(50000, KR, Full),
...
> + __DEFINE_LINK_MODE_NAME(1000, T1, Full),
> +};
^ permalink raw reply
* Re: [PATCH v5] net: netfilter: Fix rpfilter dropping vrf packets by mistake
From: linmiaohe @ 2019-07-03 1:59 UTC (permalink / raw)
To: David Ahern
Cc: pablo@netfilter.org, kadlec@blackhole.kfki.hu, fw@strlen.de,
davem@davemloft.net, kuznet@ms2.inr.ac.ru,
yoshfuji@linux-ipv6.org, netfilter-devel@vger.kernel.org,
coreteam@netfilter.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Mingfangsen
Add David Ahern. @David Ahern I'am so sorry but I rerun scripts/get_maintainer.pl .
You are not in the list , so I forgot to add you to the email-to list. I'am sorry again.
Have a good day.
Best wishes.
When firewalld is enabled with ipv4/ipv6 rpfilter, vrf
ipv4/ipv6 packets will be dropped. Vrf device will pass through netfilter hook twice. One with enslaved device and another one with l3 master device. So in device may dismatch witch out device because out device is always enslaved device.So failed with the check of the rpfilter and drop the packets by mistake.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
---
net/ipv4/netfilter/ipt_rpfilter.c | 1 + net/ipv6/netfilter/ip6t_rpfilter.c | 8 ++++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/netfilter/ipt_rpfilter.c b/net/ipv4/netfilter/ipt_rpfilter.c
index 59031670b16a..cc23f1ce239c 100644
--- a/net/ipv4/netfilter/ipt_rpfilter.c
+++ b/net/ipv4/netfilter/ipt_rpfilter.c
@@ -78,6 +78,7 @@ static bool rpfilter_mt(const struct sk_buff *skb, struct xt_action_param *par)
flow.flowi4_mark = info->flags & XT_RPFILTER_VALID_MARK ? skb->mark : 0;
flow.flowi4_tos = RT_TOS(iph->tos);
flow.flowi4_scope = RT_SCOPE_UNIVERSE;
+ flow.flowi4_oif = l3mdev_master_ifindex_rcu(xt_in(par));
return rpfilter_lookup_reverse(xt_net(par), &flow, xt_in(par), info->flags) ^ invert; } diff --git a/net/ipv6/netfilter/ip6t_rpfilter.c b/net/ipv6/netfilter/ip6t_rpfilter.c
index 6bcaf7357183..d800801a5dd2 100644
--- a/net/ipv6/netfilter/ip6t_rpfilter.c
+++ b/net/ipv6/netfilter/ip6t_rpfilter.c
@@ -55,7 +55,9 @@ static bool rpfilter_lookup_reverse6(struct net *net, const struct sk_buff *skb,
if (rpfilter_addr_linklocal(&iph->saddr)) {
lookup_flags |= RT6_LOOKUP_F_IFACE;
fl6.flowi6_oif = dev->ifindex;
- } else if ((flags & XT_RPFILTER_LOOSE) == 0)
+ /* Set flowi6_oif for vrf devices to lookup route in l3mdev domain. */
+ } else if (netif_is_l3_master(dev) || netif_is_l3_slave(dev) ||
+ (flags & XT_RPFILTER_LOOSE) == 0)
fl6.flowi6_oif = dev->ifindex;
rt = (void *)ip6_route_lookup(net, &fl6, skb, lookup_flags); @@ -70,7 +72,9 @@ static bool rpfilter_lookup_reverse6(struct net *net, const struct sk_buff *skb,
goto out;
}
- if (rt->rt6i_idev->dev == dev || (flags & XT_RPFILTER_LOOSE))
+ if (rt->rt6i_idev->dev == dev ||
+ l3mdev_master_ifindex_rcu(rt->rt6i_idev->dev) == dev->ifindex ||
+ (flags & XT_RPFILTER_LOOSE))
ret = true;
out:
ip6_rt_put(rt);
--
2.21.GIT
^ permalink raw reply related
* Re: [PATCH net-next 1/3] macsec: remove superfluous function calls
From: Willem de Bruijn @ 2019-07-03 1:50 UTC (permalink / raw)
To: Willem de Bruijn; +Cc: Andreas Steinmetz, Network Development, Sabrina Dubroca
In-Reply-To: <CA+FuTSfih0pBbOnXxkw4UpmiqDnNLf4k8O-=7XW4m7fj5ogqXw@mail.gmail.com>
On Sun, Jun 30, 2019 at 9:57 PM Willem de Bruijn
<willemdebruijn.kernel@gmail.com> wrote:
>
> On Sun, Jun 30, 2019 at 4:48 PM Andreas Steinmetz <ast@domdv.de> wrote:
> >
> > Remove superfluous skb_share_check() and skb_unshare().
> > macsec_decrypt is only called by macsec_handle_frame which
> > already does a skb_unshare().
>
> There is a subtle difference. skb_unshare() acts on cloned skbs, not
> shared skbs.
>
> It creates a private copy of data if clones may access it
> concurrently, which clearly is needed when modifying for decryption.
>
> At rx_handler, I don't think a shared skb happen (unlike clones, e.g.,
> from packet sockets). But it is peculiar that most, if not all,
> rx_handlers seem to test for it. That have started with the bridge
> device:
>
> commit 7b995651e373d6424f81db23f2ec503306dfd7f0
> Author: Herbert Xu <herbert@gondor.apana.org.au>
> Date: Sun Oct 14 00:39:01 2007 -0700
>
> [BRIDGE]: Unshare skb upon entry
>
> Due to the special location of the bridging hook, it should never see a
> shared packet anyway (certainly not with any in-kernel code). So it
> makes sense to unshare the skb there if necessary as that will greatly
> simplify the code below it (in particular, netfilter).
>
> Anyway, remove the check only if certain.
Did you see this point? I notice the v2 without this mentioned. I
don't think you can remove an skb_share_check solely on the basis of a
previous skb_unshare. I agree that here a shared skb is unlikely, but
that is for a very different, less obvious, reason.
>
> >
> > Signed-off-by: Andreas Steinmetz <ast@domdv.de>
> >
> > --- a/drivers/net/macsec.c 2019-06-30 22:02:54.906908179 +0200
> > +++ b/drivers/net/macsec.c 2019-06-30 22:03:07.315785186 +0200
> > @@ -939,9 +939,6 @@
> > u16 icv_len = secy->icv_len;
> >
> > macsec_skb_cb(skb)->valid = false;
> > - skb = skb_share_check(skb, GFP_ATOMIC);
> > - if (!skb)
> > - return ERR_PTR(-ENOMEM);
> >
> > ret = skb_cow_data(skb, 0, &trailer);
> > if (unlikely(ret < 0)) {
> > @@ -973,11 +970,6 @@
> >
> > aead_request_set_crypt(req, sg, sg, len, iv);
> > aead_request_set_ad(req, macsec_hdr_len(macsec_skb_cb(skb)->has_sci));
> > - skb = skb_unshare(skb, GFP_ATOMIC);
> > - if (!skb) {
> > - aead_request_free(req);
> > - return ERR_PTR(-ENOMEM);
> > - }
> > } else {
> > /* integrity only: all headers + data authenticated */
> > aead_request_set_crypt(req, sg, sg, icv_len, iv);
> >
^ permalink raw reply
* Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
From: Ivan Khoronzhuk @ 2019-07-02 20:28 UTC (permalink / raw)
To: Jesper Dangaard Brouer, netdev, Ilias Apalodimas,
grygorii.strashko, jakub.kicinski, daniel, john.fastabend, ast,
linux-kernel, linux-omap
In-Reply-To: <20190702185839.GH4510@khorivan>
On Tue, Jul 02, 2019 at 09:58:40PM +0300, Ivan Khoronzhuk wrote:
>On Tue, Jul 02, 2019 at 08:29:07PM +0200, Jesper Dangaard Brouer wrote:
>>On Tue, 2 Jul 2019 18:21:13 +0300
>>Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>>
>>>On Tue, Jul 02, 2019 at 05:10:29PM +0200, Jesper Dangaard Brouer wrote:
>>>>On Tue, 2 Jul 2019 17:56:13 +0300
>>>>Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>>>>
>>>>> On Tue, Jul 02, 2019 at 04:52:30PM +0200, Jesper Dangaard Brouer wrote:
>>>>> >On Tue, 2 Jul 2019 17:44:27 +0300
>>>>> >Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>>>>> >
>>>>> >> On Tue, Jul 02, 2019 at 04:31:39PM +0200, Jesper Dangaard Brouer wrote:
>>>>> >> >From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
>>>>> >> >
>>>>> >> >Jesper recently removed page_pool_destroy() (from driver invocation) and
>>>>> >> >moved shutdown and free of page_pool into xdp_rxq_info_unreg(), in-order to
>>>>> >> >handle in-flight packets/pages. This created an asymmetry in drivers
>>>>> >> >create/destroy pairs.
>>>>> >> >
>>>>> >> >This patch add page_pool user refcnt and reintroduce page_pool_destroy.
>>>>> >> >This serves two purposes, (1) simplify drivers error handling as driver now
>>>>> >> >drivers always calls page_pool_destroy() and don't need to track if
>>>>> >> >xdp_rxq_info_reg_mem_model() was unsuccessful. (2) allow special cases
>>>>> >> >where a single RX-queue (with a single page_pool) provides packets for two
>>>>> >> >net_device'es, and thus needs to register the same page_pool twice with two
>>>>> >> >xdp_rxq_info structures.
>>>>> >>
>>>>> >> As I tend to use xdp level patch there is no more reason to mention (2) case
>>>>> >> here. XDP patch serves it better and can prevent not only obj deletion but also
>>>>> >> pool flush, so, this one patch I could better leave only for (1) case.
>>>>> >
>>>>> >I don't understand what you are saying.
>>>>> >
>>>>> >Do you approve this patch, or do you reject this patch?
>>>>> >
>>>>> It's not reject, it's proposition to use both, XDP and page pool patches,
>>>>> each having its goal.
>>>>
>>>>Just to be clear, if you want this patch to get accepted you have to
>>>>reply with your Signed-off-by (as I wrote).
>>>>
>>>>Maybe we should discuss it in another thread, about why you want two
>>>>solutions to the same problem.
>>>
>>>If it solves same problem I propose to reject this one and use this:
>>>https://lkml.org/lkml/2019/7/2/651
>>
>>No, I propose using this one, and rejecting the other one.
>
>There is at least several arguments against this one (related (2) purpose)
>
>It allows:
>- avoid changes to page_pool/mlx5/netsec
>- save not only allocator obj but allocator "page/buffer flush"
>- buffer flush can be present not only in page_pool but for other allocators
> that can behave differently and not so simple solution.
>- to not limit cpsw/(potentially others) to use "page_pool" allocator only
>....
>
>This patch better leave also, as it simplifies error path for page_pool and
>have more error prone usage comparing with existent one.
>
>Please, don't limit cpsw and potentially other drivers to use only
>page_pool it can be zca or etc... I don't won't to modify each allocator.
>I propose to add both as by fact they solve different problems with common
>solution.
I can pick up this one but remove description related to (2) and add
appropriate modifications to cpsw.
--
Regards,
Ivan Khoronzhuk
^ permalink raw reply
* [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support
From: Voon Weifeng @ 2019-07-03 9:50 UTC (permalink / raw)
To: David S. Miller, Maxime Coquelin
Cc: netdev, linux-kernel, Jose Abreu, Giuseppe Cavallaro, Andrew Lunn,
Florian Fainelli, Alexandre Torgue, biao huang, Ong Boon Leong,
Kweh Hock Leong, Voon Weifeng
From: Kweh Hock Leong <hock.leong.kweh@intel.com>
DWMAC4 is capable to support clause 45 mdio communication.
This patch enable the feature on stmmac_mdio_write() and
stmmac_mdio_read() by following phy_write_mmd() and
phy_read_mmd() mdiobus read write implementation format.
Reviewed-by: Li, Yifan <yifan2.li@intel.com>
Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Weifeng Voon <weifeng.voon@intel.com>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 18cadf0b0d66..b9edb18769f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -24,11 +24,27 @@
#define MII_BUSY 0x00000001
#define MII_WRITE 0x00000002
+#define MII_DATA_MASK GENMASK(15, 0)
/* GMAC4 defines */
#define MII_GMAC4_GOC_SHIFT 2
+#define MII_GMAC4_REG_ADDR_SHIFT 16
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
+#define MII_GMAC4_C45E BIT(1)
+
+static void stmmac_mdio_c45_setup(struct stmmac_priv *priv, int phyreg,
+ u32 *val, u32 *data)
+{
+ unsigned int reg_shift = priv->hw->mii.reg_shift;
+ unsigned int reg_mask = priv->hw->mii.reg_mask;
+
+ *val |= MII_GMAC4_C45E;
+ *val &= ~reg_mask;
+ *val |= ((phyreg >> MII_DEVADDR_C45_SHIFT) << reg_shift) & reg_mask;
+
+ *data |= (phyreg & MII_REGADDR_C45_MASK) << MII_GMAC4_REG_ADDR_SHIFT;
+}
/* XGMAC defines */
#define MII_XGMAC_SADDR BIT(18)
@@ -155,22 +171,26 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
- int data;
u32 value = MII_BUSY;
+ int data = 0;
+ u32 v;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_READ;
+ if (phyreg & MII_ADDR_C45)
+ stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
+ }
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
100, 10000))
return -EBUSY;
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
@@ -178,7 +198,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
return -EBUSY;
/* Read the data from the MII data register */
- data = (int)readl(priv->ioaddr + mii_data);
+ data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
return data;
}
@@ -198,8 +218,9 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
u32 value = MII_BUSY;
+ int data = phydata;
+ u32 v;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
@@ -207,10 +228,13 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_WRITE;
- else
+ if (phyreg & MII_ADDR_C45)
+ stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
+ } else {
value |= MII_WRITE;
+ }
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
@@ -218,7 +242,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
return -EBUSY;
/* Set the MII address register to write */
- writel(phydata, priv->ioaddr + mii_data);
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d0af7d37fdf9..1739c6dc470e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -195,6 +195,8 @@ static inline const char *phy_modes(phy_interface_t interface)
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
#define MII_ADDR_C45 (1<<30)
+#define MII_DEVADDR_C45_SHIFT 16
+#define MII_REGADDR_C45_MASK GENMASK(15, 0)
struct device;
struct phylink;
--
1.9.1
^ permalink raw reply related
* Re: [PATCH net 2/2] macsec: fix checksumming after decryption
From: Willem de Bruijn @ 2019-07-03 1:47 UTC (permalink / raw)
To: Andreas Steinmetz; +Cc: Willem de Bruijn, Network Development, Sabrina Dubroca
In-Reply-To: <a7c67e7e22103fc7cf02c520a8b42d9aa525700f.camel@domdv.de>
On Tue, Jul 2, 2019 at 3:48 PM Andreas Steinmetz <ast@domdv.de> wrote:
>
> On Tue, 2019-07-02 at 10:35 -0400, Willem de Bruijn wrote:
> > On Tue, Jul 2, 2019 at 12:25 AM Andreas Steinmetz <ast@domdv.de> wrote:
> > > On Sun, 2019-06-30 at 21:47 -0400, Willem de Bruijn wrote:
> > > > On Sun, Jun 30, 2019 at 4:48 PM Andreas Steinmetz <ast@domdv.de>
> > > > wrote:
> > > > > Fix checksumming after decryption.
> > > > >
> > > > > Signed-off-by: Andreas Steinmetz <ast@domdv.de>
> > > > >
> > > > > --- a/drivers/net/macsec.c 2019-06-30 22:14:10.250285314 +0200
> > > > > +++ b/drivers/net/macsec.c 2019-06-30 22:15:11.931230417 +0200
> > > > > @@ -869,6 +869,7 @@
> > > > >
> > > > > static void macsec_finalize_skb(struct sk_buff *skb, u8 icv_len,
> > > > > u8 hdr_len)
> > > > > {
> > > > > + skb->ip_summed = CHECKSUM_NONE;
> > > > > memmove(skb->data + hdr_len, skb->data, 2 * ETH_ALEN);
> > > > > skb_pull(skb, hdr_len);
> > > > > pskb_trim_unique(skb, skb->len - icv_len);
> > > >
> > > > Does this belong in macset_reset_skb?
> > >
> > > Putting this in macsec_reset_skb would then miss out the "nosci:" part
> > > of the RX path in macsec_handle_frame().
> >
> > It is called on each nskb before calling netif_rx.
> >
> > It indeed is not called when returning RX_HANDLER_PASS, but that is correct?
>
> This is correct. Packets passed on with RX_HANDLER_PASS are either not for this
> driver or the special case of being destined for a KaY and in this case being
> the MACsec ethernet protocol and thus not IP, so no checksumming.
So this could have been set in macsec_reset_skb, then? As all relevant cases
call it. Anyway, it's not very important and already merged.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox