* [PATCH AUTOSEL 4.19 051/158] ipset: Fix memory accounting for hash types on resize
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Stefano Brivio, NOYB, Jozsef Kadlecsik, Sasha Levin,
netfilter-devel, coreteam, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Stefano Brivio <sbrivio@redhat.com>
[ Upstream commit 11921796f4799ca9c61c4b22cc54d84aa69f8a35 ]
If a fresh array block is allocated during resize, the current in-memory
set size should be increased by the size of the block, not replaced by it.
Before the fix, adding entries to a hash set type, leading to a table
resize, caused an inconsistent memory size to be reported. This becomes
more obvious when swapping sets with similar sizes:
# cat hash_ip_size.sh
#!/bin/sh
FAIL_RETRIES=10
tries=0
while [ ${tries} -lt ${FAIL_RETRIES} ]; do
ipset create t1 hash:ip
for i in `seq 1 4345`; do
ipset add t1 1.2.$((i / 255)).$((i % 255))
done
t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset create t2 hash:ip
for i in `seq 1 4360`; do
ipset add t2 1.2.$((i / 255)).$((i % 255))
done
t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset swap t1 t2
t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset destroy t1
ipset destroy t2
tries=$((tries + 1))
if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then
echo "FAIL after ${tries} tries:"
echo "T1 size ${t1_init}, after swap ${t1_swap}"
echo "T2 size ${t2_init}, after swap ${t2_swap}"
exit 1
fi
done
echo "PASS"
# echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control
# ./hash_ip_size.sh
[ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa
[ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163)
[ 2035.080353] Table destroy by resize 00000000fe6551fa
FAIL after 4 tries:
T1 size 9064, after swap 71128
T2 size 71128, after swap 9064
Reported-by: NOYB <JunkYardMail1@Frontier.com>
Fixes: 9e41f26a505c ("netfilter: ipset: Count non-static extension memory for userspace")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/ipset/ip_set_hash_gen.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h
index 8a33dac4e805..ddfe06d7530b 100644
--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -625,7 +625,7 @@ mtype_resize(struct ip_set *set, bool retried)
goto cleanup;
}
m->size = AHASH_INIT_SIZE;
- extsize = ext_size(AHASH_INIT_SIZE, dsize);
+ extsize += ext_size(AHASH_INIT_SIZE, dsize);
RCU_INIT_POINTER(hbucket(t, key), m);
} else if (m->pos >= m->size) {
struct hbucket *ht;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 044/158] net: stmmac: modify default value of tx-frames
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Biao Huang, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Biao Huang <biao.huang@mediatek.com>
[ Upstream commit d2facb4b3983425f6776c24dd678a82dbe673773 ]
the default value of tx-frames is 25, it's too late when
passing tstamp to stack, then the ptp4l will fail:
ptp4l -i eth0 -f gPTP.cfg -m
ptp4l: selected /dev/ptp0 as PTP clock
ptp4l: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 1: link up
ptp4l: timed out while polling for tx timestamp
ptp4l: increasing tx_timestamp_timeout may correct this issue,
but it is likely caused by a driver bug
ptp4l: port 1: send peer delay response failed
ptp4l: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)
ptp4l tests pass when changing the tx-frames from 25 to 1 with
ethtool -C option.
It should be fine to set tx-frames default value to 1, so ptp4l will pass
by default.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 272b9ca66314..b069b3a2453b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -261,7 +261,7 @@ struct stmmac_safety_stats {
#define STMMAC_COAL_TX_TIMER 1000
#define STMMAC_MAX_COAL_TX_TICK 100000
#define STMMAC_TX_MAX_FRAMES 256
-#define STMMAC_TX_FRAMES 25
+#define STMMAC_TX_FRAMES 1
/* Packets types */
enum packets_types {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 039/158] net: hns3: set ops to null when unregister ad_dev
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Weihang Li, Peng Li, Huazhong Tan, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Weihang Li <liweihang@hisilicon.com>
[ Upstream commit 594a81b39525f0a17e92c2e0b167ae1400650380 ]
The hclge/hclgevf and hns3 module can be unloaded independently,
when hclge/hclgevf unloaded firstly, the ops of ae_dev should
be set to NULL, otherwise it will cause an use-after-free problem.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index fff5be8078ac..0594a6c3dccd 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -229,6 +229,7 @@ void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo)
ae_algo->ops->uninit_ae_dev(ae_dev);
hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+ ae_dev->ops = NULL;
}
list_del(&ae_algo->node);
@@ -316,6 +317,7 @@ void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev)
ae_algo->ops->uninit_ae_dev(ae_dev);
hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+ ae_dev->ops = NULL;
}
list_del(&ae_dev->node);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 036/158] batman-adv: Fix duplicated OGMs on NETDEV_UP
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sven Eckelmann, Linus Lüssing, Marek Lindner,
Simon Wunderlich, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Sven Eckelmann <sven@narfation.org>
[ Upstream commit 9e6b5648bbc4cd48fab62cecbb81e9cc3c6e7e88 ]
The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.
But the commit f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule
API calls") moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.
Fixes: f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule API calls")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/batman-adv/bat_iv_ogm.c | 4 ++--
net/batman-adv/hard-interface.c | 3 +++
net/batman-adv/types.h | 3 +++
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index 73bf6a93a3cf..0b7b36fa0d5c 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -2485,7 +2485,7 @@ batadv_iv_ogm_neigh_is_sob(struct batadv_neigh_node *neigh1,
return ret;
}
-static void batadv_iv_iface_activate(struct batadv_hard_iface *hard_iface)
+static void batadv_iv_iface_enabled(struct batadv_hard_iface *hard_iface)
{
/* begin scheduling originator messages on that interface */
batadv_iv_ogm_schedule(hard_iface);
@@ -2825,8 +2825,8 @@ static void batadv_iv_gw_dump(struct sk_buff *msg, struct netlink_callback *cb,
static struct batadv_algo_ops batadv_batman_iv __read_mostly = {
.name = "BATMAN_IV",
.iface = {
- .activate = batadv_iv_iface_activate,
.enable = batadv_iv_ogm_iface_enable,
+ .enabled = batadv_iv_iface_enabled,
.disable = batadv_iv_ogm_iface_disable,
.update_mac = batadv_iv_ogm_iface_update_mac,
.primary_set = batadv_iv_ogm_primary_iface_set,
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 08690d06b7be..36f0962040d1 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -821,6 +821,9 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
batadv_hardif_recalc_extra_skbroom(soft_iface);
+ if (bat_priv->algo_ops->iface.enabled)
+ bat_priv->algo_ops->iface.enabled(hard_iface);
+
out:
return 0;
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index eeee3e61c625..fdba8a144d73 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -2130,6 +2130,9 @@ struct batadv_algo_iface_ops {
/** @enable: init routing info when hard-interface is enabled */
int (*enable)(struct batadv_hard_iface *hard_iface);
+ /** @enabled: notification when hard-interface was enabled (optional) */
+ void (*enabled)(struct batadv_hard_iface *hard_iface);
+
/** @disable: de-init routing info when hard-interface is disabled */
void (*disable)(struct batadv_hard_iface *hard_iface);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 028/158] e1000e: start network tx queue only when link is up
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konstantin Khlebnikov, Alexander Duyck, Joseph Yasi, Aaron Brown,
Oleksandr Natalenko, Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[ Upstream commit d17ba0f616a08f597d9348c372d89b8c0405ccf3 ]
Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.
This patch wakes Tx queue only when NIC is ready to send packets.
This is proper fix for problem addressed by commit 0f9e980bf5ee
("e1000e: fix cyclic resets at link up with active tx").
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 31ef42a031f2..a7b5a47ab83d 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4208,7 +4208,7 @@ void e1000e_up(struct e1000_adapter *adapter)
e1000_configure_msix(adapter);
e1000_irq_enable(adapter);
- netif_start_queue(adapter->netdev);
+ /* Tx queue started by watchdog timer when link is up */
e1000e_trigger_lsc(adapter);
}
@@ -4584,6 +4584,7 @@ int e1000e_open(struct net_device *netdev)
pm_runtime_get_sync(&pdev->dev);
netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
/* allocate transmit descriptors */
err = e1000e_setup_tx_resources(adapter->tx_ring);
@@ -4644,7 +4645,6 @@ int e1000e_open(struct net_device *netdev)
e1000_irq_enable(adapter);
adapter->tx_hang_recheck = false;
- netif_start_queue(netdev);
hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
@@ -5266,6 +5266,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (phy->ops.cfg_on_link_up)
phy->ops.cfg_on_link_up(hw);
+ netif_wake_queue(netdev);
netif_carrier_on(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -5279,6 +5280,7 @@ static void e1000_watchdog_task(struct work_struct *work)
/* Link status message must follow this format */
pr_info("%s NIC Link is Down\n", adapter->netdev->name);
netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 027/158] Revert "e1000e: fix cyclic resets at link up with active tx"
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konstantin Khlebnikov, Joseph Yasi, Aaron Brown,
Oleksandr Natalenko, Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[ Upstream commit caff422ea81e144842bc44bab408d85ac449377b ]
This reverts commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61.
That change cased false-positive warning about hardware hang:
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <fffba7a7>
next_to_watch <0>
jiffies <fffbb140>
next_to_watch.status <0>
MAC Status <40080080>
PHY Status <7949>
PHY 1000BASE-T Status <0>
PHY Extended Status <3000>
PCI Status <10>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Besides warning everything works fine.
Original issue will be fixed property in following patch.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 8cd339c92c1a..31ef42a031f2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5286,13 +5286,8 @@ static void e1000_watchdog_task(struct work_struct *work)
/* 8000ES2LAN requires a Rx packet buffer work-around
* on link down event; reset the controller to flush
* the Rx packet buffer.
- *
- * If the link is lost the controller stops DMA, but
- * if there is queued Tx work it cannot be done. So
- * reset the controller to flush the Tx packet buffers.
*/
- if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
- e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
+ if (adapter->flags & FLAG_RX_NEEDS_RESTART)
adapter->flags |= FLAG_RESTART_NOW;
else
pm_schedule_suspend(netdev->dev.parent,
@@ -5315,6 +5310,14 @@ static void e1000_watchdog_task(struct work_struct *work)
adapter->gotc_old = adapter->stats.gotc;
spin_unlock(&adapter->stats64_lock);
+ /* If the link is lost the controller stops DMA, but
+ * if there is queued Tx work it cannot be done. So
+ * reset the controller to flush the Tx packet buffers.
+ */
+ if (!netif_carrier_ok(netdev) &&
+ (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+ adapter->flags |= FLAG_RESTART_NOW;
+
/* If reset is necessary, do it outside of interrupt context. */
if (adapter->flags & FLAG_RESTART_NOW) {
schedule_work(&adapter->reset_task);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 020/158] qed: Set the doorbell address correctly
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Michal Kalderon, Ariel Elior, Denis Bolotin, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Michal Kalderon <michal.kalderon@marvell.com>
[ Upstream commit 8366d520019f366fabd6c7a13032bdcd837e18d4 ]
In 100g mode the doorbell bar is united for both engines. Set
the correct offset in the hwfn so that the doorbell returned
for RoCE is in the affined hwfn.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Denis Bolotin <denis.bolotin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_dev.c | 29 ++++++++++++++--------
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 2 +-
2 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 4dd82a1612aa..a6a9688db307 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -3096,6 +3096,7 @@ static void qed_nvm_info_free(struct qed_hwfn *p_hwfn)
static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
void __iomem *p_regview,
void __iomem *p_doorbells,
+ u64 db_phys_addr,
enum qed_pci_personality personality)
{
int rc = 0;
@@ -3103,6 +3104,7 @@ static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
/* Split PCI bars evenly between hwfns */
p_hwfn->regview = p_regview;
p_hwfn->doorbells = p_doorbells;
+ p_hwfn->db_phys_addr = db_phys_addr;
if (IS_VF(p_hwfn->cdev))
return qed_vf_hw_prepare(p_hwfn);
@@ -3198,7 +3200,9 @@ int qed_hw_prepare(struct qed_dev *cdev,
/* Initialize the first hwfn - will learn number of hwfns */
rc = qed_hw_prepare_single(p_hwfn,
cdev->regview,
- cdev->doorbells, personality);
+ cdev->doorbells,
+ cdev->db_phys_addr,
+ personality);
if (rc)
return rc;
@@ -3207,22 +3211,25 @@ int qed_hw_prepare(struct qed_dev *cdev,
/* Initialize the rest of the hwfns */
if (cdev->num_hwfns > 1) {
void __iomem *p_regview, *p_doorbell;
- u8 __iomem *addr;
+ u64 db_phys_addr;
+ u32 offset;
/* adjust bar offset for second engine */
- addr = cdev->regview +
- qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
- BAR_ID_0) / 2;
- p_regview = addr;
+ offset = qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
+ BAR_ID_0) / 2;
+ p_regview = cdev->regview + offset;
- addr = cdev->doorbells +
- qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
- BAR_ID_1) / 2;
- p_doorbell = addr;
+ offset = qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
+ BAR_ID_1) / 2;
+
+ p_doorbell = cdev->doorbells + offset;
+
+ db_phys_addr = cdev->db_phys_addr + offset;
/* prepare second hw function */
rc = qed_hw_prepare_single(&cdev->hwfns[1], p_regview,
- p_doorbell, personality);
+ p_doorbell, db_phys_addr,
+ personality);
/* in case of error, need to free the previously
* initiliazed hwfn 0.
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 7873d6dfd91f..13802b825d65 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -803,7 +803,7 @@ static int qed_rdma_add_user(void *rdma_cxt,
dpi_start_offset +
((out_params->dpi) * p_hwfn->dpi_size));
- out_params->dpi_phys_addr = p_hwfn->cdev->db_phys_addr +
+ out_params->dpi_phys_addr = p_hwfn->db_phys_addr +
dpi_start_offset +
((out_params->dpi) * p_hwfn->dpi_size);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 008/158] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Anilkumar Kolli, Tamizh chelvam, Kalle Valo, Sasha Levin,
linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
[ Upstream commit d8792393a783158cbb2c39939cb897dc5e5299b6 ]
Increase pulse width range from 1-2usec to 0-4usec.
During data traffic HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the success rate.
Tested ath10k hw and fw:
* QCA9888(10.4-3.5.1-00052)
* QCA4019(10.4-3.2.1.1-00017)
* QCA9984(10.4-3.6-00104)
* QCA988X(10.2.4-1.0-00041)
Tested ath9k hw: AR9300
Tested-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index d52b31b45df7..a274eb0d1968 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -111,7 +111,7 @@ static const struct radar_detector_specs jp_radar_ref_types[] = {
JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false),
JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false),
JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
- JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
+ JP_PATTERN(3, 0, 4, 4000, 4000, 1, 18, 50, false),
JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 007/158] wil6210: fix spurious interrupts in 3-msi
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maya Erez, Kalle Valo, Sasha Levin, linux-wireless, wil6210,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Maya Erez <merez@codeaurora.org>
[ Upstream commit e10b0eddd5235aa5aef4e40b970e34e735611a80 ]
Interrupt is set in ICM (ICR & ~IMV) rising trigger.
As the driver masks the IRQ after clearing it, there can
be a race where an additional spurious interrupt is triggered
when the driver unmask the IRQ.
This can happen in case HW triggers an interrupt after the clear
and before the mask.
To prevent the second spurious interrupt the driver needs to mask the
IRQ before reading and clearing it.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 65 ++++++++++++--------
1 file changed, 40 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 5d287a8e1b45..0655cd884514 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -296,21 +296,24 @@ void wil_configure_interrupt_moderation(struct wil6210_priv *wil)
static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
- u32 isr = wil_ioread32_and_clear(wil->csr +
- HOSTADDR(RGF_DMA_EP_RX_ICR) +
- offsetof(struct RGF_ICR, ICR));
+ u32 isr;
bool need_unmask = true;
+ wil6210_mask_irq_rx(wil);
+
+ isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
trace_wil6210_irq_rx(isr);
wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr);
if (unlikely(!isr)) {
wil_err_ratelimited(wil, "spurious IRQ: RX\n");
+ wil6210_unmask_irq_rx(wil);
return IRQ_NONE;
}
- wil6210_mask_irq_rx(wil);
-
/* RX_DONE and RX_HTRSH interrupts are the same if interrupt
* moderation is not used. Interrupt moderation may cause RX
* buffer overflow while RX_DONE is delayed. The required
@@ -355,21 +358,24 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
static irqreturn_t wil6210_irq_rx_edma(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
- u32 isr = wil_ioread32_and_clear(wil->csr +
- HOSTADDR(RGF_INT_GEN_RX_ICR) +
- offsetof(struct RGF_ICR, ICR));
+ u32 isr;
bool need_unmask = true;
+ wil6210_mask_irq_rx_edma(wil);
+
+ isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_INT_GEN_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
trace_wil6210_irq_rx(isr);
wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr);
if (unlikely(!isr)) {
wil_err(wil, "spurious IRQ: RX\n");
+ wil6210_unmask_irq_rx_edma(wil);
return IRQ_NONE;
}
- wil6210_mask_irq_rx_edma(wil);
-
if (likely(isr & BIT_RX_STATUS_IRQ)) {
wil_dbg_irq(wil, "RX status ring\n");
isr &= ~BIT_RX_STATUS_IRQ;
@@ -403,21 +409,24 @@ static irqreturn_t wil6210_irq_rx_edma(int irq, void *cookie)
static irqreturn_t wil6210_irq_tx_edma(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
- u32 isr = wil_ioread32_and_clear(wil->csr +
- HOSTADDR(RGF_INT_GEN_TX_ICR) +
- offsetof(struct RGF_ICR, ICR));
+ u32 isr;
bool need_unmask = true;
+ wil6210_mask_irq_tx_edma(wil);
+
+ isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_INT_GEN_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
trace_wil6210_irq_tx(isr);
wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr);
if (unlikely(!isr)) {
wil_err(wil, "spurious IRQ: TX\n");
+ wil6210_unmask_irq_tx_edma(wil);
return IRQ_NONE;
}
- wil6210_mask_irq_tx_edma(wil);
-
if (likely(isr & BIT_TX_STATUS_IRQ)) {
wil_dbg_irq(wil, "TX status ring\n");
isr &= ~BIT_TX_STATUS_IRQ;
@@ -446,21 +455,24 @@ static irqreturn_t wil6210_irq_tx_edma(int irq, void *cookie)
static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
- u32 isr = wil_ioread32_and_clear(wil->csr +
- HOSTADDR(RGF_DMA_EP_TX_ICR) +
- offsetof(struct RGF_ICR, ICR));
+ u32 isr;
bool need_unmask = true;
+ wil6210_mask_irq_tx(wil);
+
+ isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
trace_wil6210_irq_tx(isr);
wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr);
if (unlikely(!isr)) {
wil_err_ratelimited(wil, "spurious IRQ: TX\n");
+ wil6210_unmask_irq_tx(wil);
return IRQ_NONE;
}
- wil6210_mask_irq_tx(wil);
-
if (likely(isr & BIT_DMA_EP_TX_ICR_TX_DONE)) {
wil_dbg_irq(wil, "TX done\n");
isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
@@ -532,20 +544,23 @@ static bool wil_validate_mbox_regs(struct wil6210_priv *wil)
static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
- u32 isr = wil_ioread32_and_clear(wil->csr +
- HOSTADDR(RGF_DMA_EP_MISC_ICR) +
- offsetof(struct RGF_ICR, ICR));
+ u32 isr;
+
+ wil6210_mask_irq_misc(wil, false);
+
+ isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
trace_wil6210_irq_misc(isr);
wil_dbg_irq(wil, "ISR MISC 0x%08x\n", isr);
if (!isr) {
wil_err(wil, "spurious IRQ: MISC\n");
+ wil6210_unmask_irq_misc(wil, false);
return IRQ_NONE;
}
- wil6210_mask_irq_misc(wil, false);
-
if (isr & ISR_MISC_FW_ERROR) {
u32 fw_assert_code = wil_r(wil, wil->rgf_fw_assert_code_addr);
u32 ucode_assert_code =
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 005/158] ath10k: add peer id check in ath10k_peer_find_by_id
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Wen Gong, Kalle Valo, Sasha Levin, ath10k, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit 49ed34b835e231aa941257394716bc689bc98d9f ]
For some SDIO chip, the peer id is 65535 for MPDU with error status,
then test_bit will trigger buffer overflow for peer's memory, if kasan
enabled, it will report error.
Reason is when station is in disconnecting status, firmware do not delete
the peer info since it not disconnected completely, meanwhile some AP will
still send data packet to station, then hardware will receive the packet
and send to firmware, firmware's logic will report peer id of 65535 for
MPDU with error status.
Add check for overflow the size of peer's peer_ids will avoid the buffer
overflow access.
Call trace of kasan:
dump_backtrace+0x0/0x2ec
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xc8/0xec
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load8_noabort+0x20/0x2c
ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core]
ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core]
ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core]
ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio]
process_sdio_pending_irqs+0xec/0x370
sdio_run_irqs+0x68/0xe4
sdio_irq_work+0x1c/0x28
process_one_work+0x3d8/0x8b0
worker_thread+0x508/0x7cc
kthread+0x24c/0x264
ret_from_fork+0x10/0x18
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/txrx.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index cda164f6e9f6..6f62ddc0494c 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -156,6 +156,9 @@ struct ath10k_peer *ath10k_peer_find_by_id(struct ath10k *ar, int peer_id)
{
struct ath10k_peer *peer;
+ if (peer_id >= BITS_PER_TYPE(peer->peer_ids))
+ return NULL;
+
lockdep_assert_held(&ar->data_lock);
list_for_each_entry(peer, &ar->peers, list)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 002/158] ath10k: Do not send probe response template for mesh
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Surabhi Vishnoi, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]
Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to
firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index f3b1cfacfe9d..1419f9d1505f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1624,6 +1624,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 214/219] gtp: fix suspicious RCU usage
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit e198987e7dd7d3645a53875151cd6f8fc425b706 ]
gtp_encap_enable_socket() and gtp_encap_destroy() are not protected
by rcu_read_lock(). and it's not safe to write sk->sk_user_data.
This patch make these functions to use lock_sock() instead of
rcu_dereference_sk_user_data().
Test commands:
gtp-link add gtp1
Splat looks like:
[ 83.238315] =============================
[ 83.239127] WARNING: suspicious RCU usage
[ 83.239702] 5.2.0-rc6+ #49 Not tainted
[ 83.240268] -----------------------------
[ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage!
[ 83.243828]
[ 83.243828] other info that might help us debug this:
[ 83.243828]
[ 83.246325]
[ 83.246325] rcu_scheduler_active = 2, debug_locks = 1
[ 83.247314] 1 lock held by gtp-link/1008:
[ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0
[ 83.251503]
[ 83.251503] stack backtrace:
[ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49
[ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 83.254562] Call Trace:
[ 83.254995] dump_stack+0x7c/0xbb
[ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp]
[ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp]
[ 83.257161] ? memset+0x1f/0x40
[ 83.257843] gtp_newlink+0x90/0xa21 [gtp]
[ 83.258497] ? __netlink_ns_capable+0xc3/0xf0
[ 83.259260] __rtnl_newlink+0xb9f/0x11b0
[ 83.260022] ? rtnl_link_unregister+0x230/0x230
[ ... ]
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 83488f2bf7a0..f45a806b6c06 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -293,12 +293,14 @@ static void gtp_encap_destroy(struct sock *sk)
{
struct gtp_dev *gtp;
- gtp = rcu_dereference_sk_user_data(sk);
+ lock_sock(sk);
+ gtp = sk->sk_user_data;
if (gtp) {
udp_sk(sk)->encap_type = 0;
rcu_assign_sk_user_data(sk, NULL);
sock_put(sk);
}
+ release_sock(sk);
}
static void gtp_encap_disable_sock(struct sock *sk)
@@ -800,7 +802,8 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
goto out_sock;
}
- if (rcu_dereference_sk_user_data(sock->sk)) {
+ lock_sock(sock->sk);
+ if (sock->sk->sk_user_data) {
sk = ERR_PTR(-EBUSY);
goto out_sock;
}
@@ -816,6 +819,7 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
setup_udp_tunnel_sock(sock_net(sock->sk), sock, &tuncfg);
out_sock:
+ release_sock(sock->sk);
sockfd_put(sock);
return sk;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 217/219] gtp: fix use-after-free in gtp_newlink()
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit a2bed90704c68d3763bf24decb1b781a45395de8 ]
Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().
Test commands:
#SHELL 1
while :
do
for i in {1..5}
do
./gtp-link add gtp$i &
done
killall gtp-link
done
#SHELL 2
while :
do
modprobe -rv gtp
done
Splat looks like:
[ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50
[ 753.185801] Call Trace:
[ 753.186264] dump_stack+0x7c/0xbb
[ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.187583] print_address_description+0xc7/0x240
[ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189846] __kasan_report+0x12a/0x16f
[ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.191298] kasan_report+0xe/0x20
[ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.192580] ? __netlink_ns_capable+0xc3/0xf0
[ 753.193370] __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[ 753.241201] Allocated by task 7186:
[ 753.241844] save_stack+0x19/0x80
[ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 753.243192] __kmalloc+0x13e/0x300
[ 753.243764] ops_init+0xd6/0x350
[ 753.244314] register_pernet_operations+0x249/0x6f0
[ ... ]
[ 753.251770] Freed by task 7178:
[ 753.252288] save_stack+0x19/0x80
[ 753.252833] __kasan_slab_free+0x111/0x150
[ 753.253962] kfree+0xc7/0x280
[ 753.254509] ops_free_list.part.11+0x1c4/0x2d0
[ 753.255241] unregister_pernet_operations+0x262/0x390
[ ... ]
[ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[ 753.287241] ------------[ cut here ]------------
[ 753.287794] kernel BUG at lib/list_debug.c:25!
[ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50
[ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[ 753.302183] Call Trace:
[ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp]
[ 753.303037] ? __netlink_ns_capable+0xc3/0xf0
[ 753.303576] __rtnl_newlink+0xb9f/0x11b0
[ 753.304092] ? rtnl_link_unregister+0x230/0x230
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 61e9b288d2dc..d178d5bad7e4 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1385,9 +1385,9 @@ late_initcall(gtp_init);
static void __exit gtp_fini(void)
{
- unregister_pernet_subsys(>p_net_ops);
genl_unregister_family(>p_genl_family);
rtnl_link_unregister(>p_link_ops);
+ unregister_pernet_subsys(>p_net_ops);
pr_info("GTP module unloaded\n");
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 216/219] gtp: fix use-after-free in gtp_encap_destroy()
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 1788b8569f5de27da09087fa3f6580d2aa04cc75 ]
gtp_encap_destroy() is called twice.
1. When interface is deleted.
2. When udp socket is destroyed.
either gtp->sk0 or gtp->sk1u could be freed by sock_put() in
gtp_encap_destroy(). so, when gtp_encap_destroy() is called again,
it would uses freed sk pointer.
patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to
null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected
by rtnl_lock. so, rtnl_lock() is added.
Test command:
gtp-link add gtp1 &
killall gtp-link
ip link del gtp1
Splat looks like:
[ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0
[ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008
[ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50
[ 83.188469] Call Trace:
[ ... ]
[ 83.200126] lock_acquire+0x141/0x380
[ 83.200575] ? lock_sock_nested+0x3a/0xf0
[ 83.201069] _raw_spin_lock_bh+0x38/0x70
[ 83.201551] ? lock_sock_nested+0x3a/0xf0
[ 83.202044] lock_sock_nested+0x3a/0xf0
[ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp]
[ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp]
[ 83.203687] gtp_dellink+0x56/0x170 [gtp]
[ 83.204190] rtnl_delete_link+0xb4/0x100
[ ... ]
[ 83.236513] Allocated by task 976:
[ 83.236925] save_stack+0x19/0x80
[ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 83.237894] kmem_cache_alloc+0xd8/0x280
[ 83.238360] sk_prot_alloc.isra.42+0x50/0x200
[ 83.238874] sk_alloc+0x32/0x940
[ 83.239264] inet_create+0x283/0xc20
[ 83.239684] __sock_create+0x2dd/0x540
[ 83.240136] __sys_socket+0xca/0x1a0
[ 83.240550] __x64_sys_socket+0x6f/0xb0
[ 83.240998] do_syscall_64+0x9c/0x450
[ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 83.242061]
[ 83.242249] Freed by task 0:
[ 83.242616] save_stack+0x19/0x80
[ 83.243013] __kasan_slab_free+0x111/0x150
[ 83.243498] kmem_cache_free+0x89/0x250
[ 83.244444] __sk_destruct+0x38f/0x5a0
[ 83.245366] rcu_core+0x7e9/0x1c20
[ 83.245766] __do_softirq+0x213/0x8fa
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 6f1ad7ccaea6..61e9b288d2dc 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -289,13 +289,17 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb)
return gtp_rx(pctx, skb, hdrlen, gtp->role);
}
-static void gtp_encap_destroy(struct sock *sk)
+static void __gtp_encap_destroy(struct sock *sk)
{
struct gtp_dev *gtp;
lock_sock(sk);
gtp = sk->sk_user_data;
if (gtp) {
+ if (gtp->sk0 == sk)
+ gtp->sk0 = NULL;
+ else
+ gtp->sk1u = NULL;
udp_sk(sk)->encap_type = 0;
rcu_assign_sk_user_data(sk, NULL);
sock_put(sk);
@@ -303,12 +307,19 @@ static void gtp_encap_destroy(struct sock *sk)
release_sock(sk);
}
+static void gtp_encap_destroy(struct sock *sk)
+{
+ rtnl_lock();
+ __gtp_encap_destroy(sk);
+ rtnl_unlock();
+}
+
static void gtp_encap_disable_sock(struct sock *sk)
{
if (!sk)
return;
- gtp_encap_destroy(sk);
+ __gtp_encap_destroy(sk);
}
static void gtp_encap_disable(struct gtp_dev *gtp)
@@ -1047,6 +1058,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
+ rtnl_lock();
rcu_read_lock();
gtp = gtp_find_dev(sock_net(skb->sk), info->attrs);
@@ -1071,6 +1083,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
out_unlock:
rcu_read_unlock();
+ rtnl_unlock();
return err;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 219/219] net: mvmdio: defer probe of orion-mdio if a clock is not ready
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Andrew Lunn, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Josua Mayer <josua@solid-run.com>
[ Upstream commit 433a06d7d74e677c40b1148c70c48677ff62fb6b ]
Defer probing of the orion-mdio interface when getting a clock returns
EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used
before all clocks have been enabled.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvmdio.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index c5dac6bd2be4..903836e334d8 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -321,6 +321,10 @@ static int orion_mdio_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
dev->clk[i] = of_clk_get(pdev->dev.of_node, i);
+ if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto out_clk;
+ }
if (IS_ERR(dev->clk[i]))
break;
clk_prepare_enable(dev->clk[i]);
@@ -362,6 +366,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
if (dev->err_interrupt > 0)
writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
+out_clk:
for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
if (IS_ERR(dev->clk[i]))
break;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 218/219] xdp: fix race on generic receive path
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ilya Maximets, Magnus Karlsson, William Tu, Daniel Borkmann,
Sasha Levin, netdev, xdp-newbies, bpf
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Ilya Maximets <i.maximets@samsung.com>
[ Upstream commit bf0bdd1343efbbf65b4d53aef1fce14acbd79d50 ]
Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.
Need to take a lock for each generic receive to avoid race.
Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/xdp_sock.h | 2 ++
net/xdp/xsk.c | 31 ++++++++++++++++++++++---------
2 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h
index d074b6d60f8a..ac3c047d058c 100644
--- a/include/net/xdp_sock.h
+++ b/include/net/xdp_sock.h
@@ -67,6 +67,8 @@ struct xdp_sock {
* in the SKB destructor callback.
*/
spinlock_t tx_completion_lock;
+ /* Protects generic receive. */
+ spinlock_t rx_lock;
u64 rx_dropped;
};
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index a14e8864e4fa..5e0637db92ea 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -123,13 +123,17 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
u64 addr;
int err;
- if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index)
- return -EINVAL;
+ spin_lock_bh(&xs->rx_lock);
+
+ if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index) {
+ err = -EINVAL;
+ goto out_unlock;
+ }
if (!xskq_peek_addr(xs->umem->fq, &addr) ||
len > xs->umem->chunk_size_nohr - XDP_PACKET_HEADROOM) {
- xs->rx_dropped++;
- return -ENOSPC;
+ err = -ENOSPC;
+ goto out_drop;
}
addr += xs->umem->headroom;
@@ -138,13 +142,21 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
memcpy(buffer, xdp->data_meta, len + metalen);
addr += metalen;
err = xskq_produce_batch_desc(xs->rx, addr, len);
- if (!err) {
- xskq_discard_addr(xs->umem->fq);
- xsk_flush(xs);
- return 0;
- }
+ if (err)
+ goto out_drop;
+
+ xskq_discard_addr(xs->umem->fq);
+ xskq_produce_flush_desc(xs->rx);
+ spin_unlock_bh(&xs->rx_lock);
+
+ xs->sk.sk_data_ready(&xs->sk);
+ return 0;
+
+out_drop:
xs->rx_dropped++;
+out_unlock:
+ spin_unlock_bh(&xs->rx_lock);
return err;
}
@@ -765,6 +777,7 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol,
xs = xdp_sk(sk);
mutex_init(&xs->mutex);
+ spin_lock_init(&xs->rx_lock);
spin_lock_init(&xs->tx_completion_lock);
mutex_lock(&net->xdp.lock);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 215/219] gtp: fix Illegal context switch in RCU read-side critical section.
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 3f167e1921865b379a9becf03828e7202c7b4917 ]
ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.
Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2
Splat looks like:
[ 130.618881] =============================
[ 130.626382] WARNING: suspicious RCU usage
[ 130.626994] 5.2.0-rc6+ #50 Not tainted
[ 130.627622] -----------------------------
[ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[ 130.629684]
[ 130.629684] other info that might help us debug this:
[ 130.629684]
[ 130.631022]
[ 130.631022] rcu_scheduler_active = 2, debug_locks = 1
[ 130.632136] 4 locks held by gtp-tunnel/1025:
[ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[ 130.638348]
[ 130.638348] stack backtrace:
[ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[ 130.641318] Call Trace:
[ 130.641707] dump_stack+0x7c/0xbb
[ 130.642252] ___might_sleep+0x2c0/0x3b0
[ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0
[ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[ 130.644371] genl_family_rcv_msg+0x63a/0x1030
[ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090
[ 130.645845] ? genl_unregister_family+0x630/0x630
[ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0
[ 130.647293] ? check_flags.part.40+0x440/0x440
[ 130.648099] genl_rcv_msg+0xa3/0x130
[ ... ]
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index f45a806b6c06..6f1ad7ccaea6 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -958,7 +958,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
}
- pctx = kmalloc(sizeof(struct pdp_ctx), GFP_KERNEL);
+ pctx = kmalloc(sizeof(*pctx), GFP_ATOMIC);
if (pctx == NULL)
return -ENOMEM;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 212/219] gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit e30155fd23c9c141cbe7d99b786e10a83a328837 ]
If an invalid role is sent from user space, gtp_encap_enable() will fail.
Then, it should call gtp_encap_disable_sock() but current code doesn't.
It makes memory leak.
Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 7a145172d503..83488f2bf7a0 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -847,8 +847,13 @@ static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[])
if (data[IFLA_GTP_ROLE]) {
role = nla_get_u32(data[IFLA_GTP_ROLE]);
- if (role > GTP_ROLE_SGSN)
+ if (role > GTP_ROLE_SGSN) {
+ if (sk0)
+ gtp_encap_disable_sock(sk0);
+ if (sk1u)
+ gtp_encap_disable_sock(sk1u);
return -EINVAL;
+ }
}
gtp->sk0 = sk0;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 213/219] Bluetooth: validate BLE connection interval updates
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: csonsino, Marcel Holtmann, Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: csonsino <csonsino@gmail.com>
[ Upstream commit c49a8682fc5d298d44e8d911f4fa14690ea9485e ]
Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.
The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.
The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.
The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.
Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_event.c | 5 +++++
net/bluetooth/l2cap_core.c | 9 ++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 8b893baf9bbe..31eb0449479b 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5588,6 +5588,11 @@ static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_UNKNOWN_CONN_ID);
+ if (min < hcon->le_conn_min_interval ||
+ max > hcon->le_conn_max_interval)
+ return send_conn_param_neg_reply(hdev, handle,
+ HCI_ERROR_INVALID_LL_PARAMS);
+
if (hci_check_conn_params(min, max, latency, timeout))
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_INVALID_LL_PARAMS);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 771e3e17bb6a..32d2be9d6858 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5297,7 +5297,14 @@ static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
memset(&rsp, 0, sizeof(rsp));
- err = hci_check_conn_params(min, max, latency, to_multiplier);
+ if (min < hcon->le_conn_min_interval ||
+ max > hcon->le_conn_max_interval) {
+ BT_DBG("requested connection interval exceeds current bounds.");
+ err = -EINVAL;
+ } else {
+ err = hci_check_conn_params(min, max, latency, to_multiplier);
+ }
+
if (err)
rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
else
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 211/219] Bluetooth: hidp: NUL terminate a string in the compat ioctl
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dan Carpenter, Marcel Holtmann, Sasha Levin, linux-bluetooth,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit dcae9052ebb0c5b2614de620323d615fcbfda7f8 ]
This change is similar to commit a1616a5ac99e ("Bluetooth: hidp: fix
buffer overflow") but for the compat ioctl. We take a string from the
user and forgot to ensure that it's NUL terminated.
I have also changed the strncpy() in to strscpy() in hidp_setup_hid().
The difference is the strncpy() doesn't necessarily NUL terminate the
destination string. Either change would fix the problem but it's nice
to take a belt and suspenders approach and do both.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hidp/core.c | 2 +-
net/bluetooth/hidp/sock.c | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index a442e21f3894..5abd423b55fa 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -775,7 +775,7 @@ static int hidp_setup_hid(struct hidp_session *session,
hid->version = req->version;
hid->country = req->country;
- strncpy(hid->name, req->name, sizeof(hid->name));
+ strscpy(hid->name, req->name, sizeof(hid->name));
snprintf(hid->phys, sizeof(hid->phys), "%pMR",
&l2cap_pi(session->ctrl_sock->sk)->chan->src);
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 2151913892ce..03be6a4baef3 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -192,6 +192,7 @@ static int hidp_sock_compat_ioctl(struct socket *sock, unsigned int cmd, unsigne
ca.version = ca32.version;
ca.flags = ca32.flags;
ca.idle_to = ca32.idle_to;
+ ca32.name[sizeof(ca32.name) - 1] = '\0';
memcpy(ca.name, ca32.name, 128);
csock = sockfd_lookup(ca.ctrl_sock, &err);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 210/219] Bluetooth: Check state in l2cap_disconnect_rsp
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Matias Karhumaa, Matti Kamunen, Ari Timonen, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Matias Karhumaa <matias.karhumaa@gmail.com>
[ Upstream commit 28261da8a26f4915aa257d12d506c6ba179d961f ]
Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.
Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.
Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499
L2CAP: Disconnection Request (0x06) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548
L2CAP: Disconnection Response (0x07) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397
L2CAP: Connection Request (0x02) ident 27 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441
L2CAP: Connection Response (0x03) ident 27 len 8
Destination CID: 65
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449
L2CAP: Configure Request (0x04) ident 19 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143
L2CAP: Disconnection Request (0x06) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073
L2CAP: Connection Request (0x02) ident 12 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371
L2CAP: Disconnection Response (0x07) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196
L2CAP: Configure Request (0x04) ident 13 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804
L2CAP: Connection Response (0x03) ident 12 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Fix is to check that channel is in state BT_DISCONN before deleting the
channel.
This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.
Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/l2cap_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 5406d7cd46ad..771e3e17bb6a 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4394,6 +4394,12 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
l2cap_chan_lock(chan);
+ if (chan->state != BT_DISCONN) {
+ l2cap_chan_unlock(chan);
+ mutex_unlock(&conn->chan_lock);
+ return 0;
+ }
+
l2cap_chan_hold(chan);
l2cap_chan_del(chan, 0);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 182/219] bpf: fix uapi bpf_prog_info fields alignment
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Baruch Siach, Song Liu, Jiri Olsa, Daniel Borkmann,
Geert Uytterhoeven, Linus Torvalds, Sasha Levin, netdev, bpf
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Baruch Siach <baruch@tkos.co.il>
[ Upstream commit 0472301a28f6cf53a6bc5783e48a2d0bbff4682f ]
Merge commit 1c8c5a9d38f60 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the
fix from commit 36f9814a494 ("bpf: fix uapi hole for 32 bit compat
applications") by taking the gpl_compatible 1-bit field definition from
commit b85fab0e67b162 ("bpf: Add gpl_compatible flag to struct
bpf_prog_info") as is. That breaks architectures with 16-bit alignment
like m68k. Add 31-bit pad after gpl_compatible to restore alignment of
following fields.
Thanks to Dmitry V. Levin his analysis of this bug history.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/uapi/linux/bpf.h | 1 +
tools/include/uapi/linux/bpf.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 9d01f4788d3e..9ae3f28ca469 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2871,6 +2871,7 @@ struct bpf_prog_info {
char name[BPF_OBJ_NAME_LEN];
__u32 ifindex;
__u32 gpl_compatible:1;
+ __u32 :31; /* alignment pad */
__u64 netns_dev;
__u64 netns_ino;
__u32 nr_jited_ksyms;
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 929c8e537a14..f6ce794c0f36 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -2869,6 +2869,7 @@ struct bpf_prog_info {
char name[BPF_OBJ_NAME_LEN];
__u32 ifindex;
__u32 gpl_compatible:1;
+ __u32 :31; /* alignment pad */
__u64 netns_dev;
__u64 netns_ino;
__u32 nr_jited_ksyms;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 207/219] Bluetooth: 6lowpan: search for destination address in all peers
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Jukka Rissanen, Michael Scott, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Josua Mayer <josua.mayer@jm0.eu>
[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/6lowpan.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index a7cd23f00bde..50530561da98 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -187,10 +187,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
}
if (!rt) {
- nexthop = &lowpan_cb(skb)->gw;
-
- if (ipv6_addr_any(nexthop))
- return NULL;
+ if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+ /* There is neither route nor gateway,
+ * probably the destination is a direct peer.
+ */
+ nexthop = daddr;
+ } else {
+ /* There is a known gateway
+ */
+ nexthop = &lowpan_cb(skb)->gw;
+ }
} else {
nexthop = rt6_nexthop(rt, daddr);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 203/219] net: hns3: enable broadcast promisc mode when initializing VF
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jian Shen, Peng Li, Huazhong Tan, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jian Shen <shenjian15@huawei.com>
[ Upstream commit 2d5066fc175ea77a733d84df9ef414b34f311641 ]
For revision 0x20, the broadcast promisc is enabled by firmware,
it's unnecessary to enable it when initializing VF.
For revision 0x21, it's necessary to enable broadcast promisc mode
when initializing or re-initializing VF, otherwise, it will be
unable to send and receive promisc packets.
Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 8dd7fef863f6..d7a15d5b6b61 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2425,6 +2425,12 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
return ret;
}
+ if (pdev->revision >= 0x21) {
+ ret = hclgevf_set_promisc_mode(hdev, true);
+ if (ret)
+ return ret;
+ }
+
dev_info(&hdev->pdev->dev, "Reset done\n");
return 0;
@@ -2504,9 +2510,11 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
* firmware makes sure broadcast packets can be accepted.
* For revision 0x21, default to enable broadcast promisc mode.
*/
- ret = hclgevf_set_promisc_mode(hdev, true);
- if (ret)
- goto err_config;
+ if (pdev->revision >= 0x21) {
+ ret = hclgevf_set_promisc_mode(hdev, true);
+ if (ret)
+ goto err_config;
+ }
/* Initialize RSS for this VF */
ret = hclgevf_rss_init_hw(hdev);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 202/219] tools: bpftool: Fix json dump crash on powerpc
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jiri Olsa, Michael Petlan, Jiri Olsa, Quentin Monnet,
Jakub Kicinski, Daniel Borkmann, Sasha Levin, netdev, bpf
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jiri Olsa <jolsa@redhat.com>
[ Upstream commit aa52bcbe0e72fac36b1862db08b9c09c4caefae3 ]
Michael reported crash with by bpf program in json mode on powerpc:
# bpftool prog -p dump jited id 14
[{
"name": "0xd00000000a9aa760",
"insns": [{
"pc": "0x0",
"operation": "nop",
"operands": [null
]
},{
"pc": "0x4",
"operation": "nop",
"operands": [null
]
},{
"pc": "0x8",
"operation": "mflr",
Segmentation fault (core dumped)
The code is assuming char pointers in format, which is not always
true at least for powerpc. Fixing this by dumping the whole string
into buffer based on its format.
Please note that libopcodes code does not check return values from
fprintf callback, but as per Jakub suggestion returning -1 on allocation
failure so we do the best effort to propagate the error.
Fixes: 107f041212c1 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/bpf/bpftool/jit_disasm.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index 3ef3093560ba..bfed711258ce 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -11,6 +11,8 @@
* Licensed under the GNU General Public License, version 2.0 (GPLv2)
*/
+#define _GNU_SOURCE
+#include <stdio.h>
#include <stdarg.h>
#include <stdint.h>
#include <stdio.h>
@@ -44,11 +46,13 @@ static int fprintf_json(void *out, const char *fmt, ...)
char *s;
va_start(ap, fmt);
+ if (vasprintf(&s, fmt, ap) < 0)
+ return -1;
+ va_end(ap);
+
if (!oper_count) {
int i;
- s = va_arg(ap, char *);
-
/* Strip trailing spaces */
i = strlen(s) - 1;
while (s[i] == ' ')
@@ -61,11 +65,10 @@ static int fprintf_json(void *out, const char *fmt, ...)
} else if (!strcmp(fmt, ",")) {
/* Skip */
} else {
- s = va_arg(ap, char *);
jsonw_string(json_wtr, s);
oper_count++;
}
- va_end(ap);
+ free(s);
return 0;
}
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox