* [PATCH AUTOSEL 4.19 108/158] ath10k: add missing error handling
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Claire Chang, Brian Norris, Kalle Valo, Sasha Levin, ath10k,
linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Claire Chang <tientzu@chromium.org>
[ Upstream commit 4b553f3ca4cbde67399aa3a756c37eb92145b8a1 ]
In function ath10k_sdio_mbox_rx_alloc() [sdio.c],
ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases.
This will make the driver think the allocation for skb is successful and
try to access the skb. If we enable failslab, system will easily crash with
NULL pointer dereferencing.
Call trace of CONFIG_FAILSLAB:
ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio]
process_sdio_pending_irqs+0x4c/0x174
sdio_run_irqs+0x3c/0x64
sdio_irq_work+0x1c/0x28
Fixes: d96db25d2025 ("ath10k: add initial SDIO support")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 7f61591ce0de..cb527a21f1ac 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -613,6 +613,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
full_len,
last_in_bundle,
last_in_bundle);
+ if (ret) {
+ ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
+ goto err;
+ }
}
ar_sdio->n_rx_pkts = i;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 109/158] ath10k: fix PCIE device wake up failed
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Miaoqing Pan, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]
Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"
The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake
Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.
But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.
Tested HW: QCA9984
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 677535b3d207..476e0535f06f 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -168,7 +168,7 @@ const struct ath10k_hw_values qca6174_values = {
};
const struct ath10k_hw_values qca99x0_values = {
- .rtc_state_val_on = 5,
+ .rtc_state_val_on = 7,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 104/158] mt7601u: do not schedule rx_tasklet when the device has been disconnected
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lorenzo Bianconi, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 4079e8ccabc3b6d1b503f2376123cb515d14921f ]
Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.
[ 24.921354] usb 3-14: USB disconnect, device number 7
[ 24.921593] ------------[ cut here ]------------
[ 24.921594] RX urb mismatch
[ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #201903231635
[ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[ 24.921782] Workqueue: usb_hub_wq hub_event
[ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086
[ 24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006
[ 24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420
[ 24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8
[ 24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c
[ 24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000
[ 24.921807] FS: 0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000
[ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0
[ 24.921809] Call Trace:
[ 24.921812] <IRQ>
[ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140
[ 24.921821] usb_hcd_giveback_urb+0xca/0xe0
[ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[ 24.921834] handle_cmd_completion+0xe02/0x10d0
[ 24.921837] xhci_irq+0x274/0x4a0
[ 24.921838] xhci_msi_irq+0x11/0x20
[ 24.921851] __handle_irq_event_percpu+0x44/0x190
[ 24.921856] handle_irq_event_percpu+0x32/0x80
[ 24.921861] handle_irq_event+0x3b/0x5a
[ 24.921867] handle_edge_irq+0x80/0x190
[ 24.921874] handle_irq+0x20/0x30
[ 24.921889] do_IRQ+0x4e/0xe0
[ 24.921891] common_interrupt+0xf/0xf
[ 24.921892] </IRQ>
[ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[ 24.921354] usb 3-14: USB disconnect, device number 7
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/dma.c | 33 +++++++++++----------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 7f3e3983b781..bc36712cfffc 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -193,10 +193,23 @@ static void mt7601u_complete_rx(struct urb *urb)
struct mt7601u_rx_queue *q = &dev->rx_q;
unsigned long flags;
- spin_lock_irqsave(&dev->rx_lock, flags);
+ /* do no schedule rx tasklet if urb has been unlinked
+ * or the device has been removed
+ */
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ case -ENOENT:
+ return;
+ default:
+ dev_err_ratelimited(dev->dev, "rx urb failed: %d\n",
+ urb->status);
+ /* fall through */
+ case 0:
+ break;
+ }
- if (mt7601u_urb_has_error(urb))
- dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status);
+ spin_lock_irqsave(&dev->rx_lock, flags);
if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch"))
goto out;
@@ -363,19 +376,9 @@ int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb,
static void mt7601u_kill_rx(struct mt7601u_dev *dev)
{
int i;
- unsigned long flags;
- spin_lock_irqsave(&dev->rx_lock, flags);
-
- for (i = 0; i < dev->rx_q.entries; i++) {
- int next = dev->rx_q.end;
-
- spin_unlock_irqrestore(&dev->rx_lock, flags);
- usb_poison_urb(dev->rx_q.e[next].urb);
- spin_lock_irqsave(&dev->rx_lock, flags);
- }
-
- spin_unlock_irqrestore(&dev->rx_lock, flags);
+ for (i = 0; i < dev->rx_q.entries; i++)
+ usb_poison_urb(dev->rx_q.e[i].urb);
}
static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 117/158] ixgbe: Check DDM existence in transceiver before access
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Mauro S. M. Rodrigues, Jesse Brandeburg, Andrew Bowers,
Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index e5a8461fe6a9..8829bd95d0d3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3223,7 +3223,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
page_swap = true;
}
- if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+ if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+ !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
/* We have a SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 64e44e01c973..c56baad04ee6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -45,6 +45,7 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED 0x40
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 121/158] wil6210: drop old event after wmi_call timeout
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ahmad Masri, Maya Erez, Kalle Valo, Sasha Levin, linux-wireless,
wil6210, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Ahmad Masri <amasri@codeaurora.org>
[ Upstream commit 1a276003111c0404f6bfeffe924c5a21f482428b ]
This change fixes a rare race condition of handling WMI events after
wmi_call expires.
wmi_recv_cmd immediately handles an event when reply_buf is defined and
a wmi_call is waiting for the event.
However, in case the wmi_call has already timed-out, there will be no
waiting/running wmi_call and the event will be queued in WMI queue and
will be handled later in wmi_event_handle.
Meanwhile, a new similar wmi_call for the same command and event may
be issued. In this case, when handling the queued event we got WARN_ON
printed.
Fixing this case as a valid timeout and drop the unexpected event.
Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/wmi.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 6e3b3031f29b..2010f771478d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2816,7 +2816,18 @@ static void wmi_event_handle(struct wil6210_priv *wil,
/* check if someone waits for this event */
if (wil->reply_id && wil->reply_id == id &&
wil->reply_mid == mid) {
- WARN_ON(wil->reply_buf);
+ if (wil->reply_buf) {
+ /* event received while wmi_call is waiting
+ * with a buffer. Such event should be handled
+ * in wmi_recv_cmd function. Handling the event
+ * here means a previous wmi_call was timeout.
+ * Drop the event and do not handle it.
+ */
+ wil_err(wil,
+ "Old event (%d, %s) while wmi_call is waiting. Drop it and Continue waiting\n",
+ id, eventid2name(id));
+ return;
+ }
wmi_evt_call_handler(vif, id, evt_data,
len - sizeof(*wmi));
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 129/158] net: hns3: fix a -Wformat-nonliteral compile warning
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yonglong Liu, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Yonglong Liu <liuyonglong@huawei.com>
[ Upstream commit 18d219b783da61a6cc77581f55fc4af2fa16bc36 ]
When setting -Wformat=2, there is a compiler warning like this:
hclge_main.c:xxx:x: warning: format not a string literal and no
format arguments [-Wformat-nonliteral]
strs[i].desc);
^~~~
This patch adds missing format parameter "%s" to snprintf() to
fix it.
Fixes: 46a3df9f9718 ("Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4648c6a9d9e8..89ca69fa2b97 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -663,8 +663,7 @@ static u8 *hclge_comm_get_strings(u32 stringset,
return buff;
for (i = 0; i < size; i++) {
- snprintf(buff, ETH_GSTRING_LEN,
- strs[i].desc);
+ snprintf(buff, ETH_GSTRING_LEN, "%s", strs[i].desc);
buff = buff + ETH_GSTRING_LEN;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 130/158] net: hns3: add some error checking in hclge_tm module
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yunsheng Lin, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Yunsheng Lin <linyunsheng@huawei.com>
[ Upstream commit 04f25edb48c441fc278ecc154c270f16966cbb90 ]
When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the
hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg
with vport->vport_id as pri_id, which is used as index for
hdev->tm_info.tc_info, it will cause out of bound access issue
if vport_id is equal to or larger than HNAE3_MAX_TC.
Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE.
So this patch adds two checks for above cases.
Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 48235dc2dd56..11e9259ca040 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -54,7 +54,8 @@ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
u32 tick;
/* Calc tick */
- if (shaper_level >= HCLGE_SHAPER_LVL_CNT)
+ if (shaper_level >= HCLGE_SHAPER_LVL_CNT ||
+ ir > HCLGE_ETHER_MAX_RATE)
return -EINVAL;
tick = tick_array[shaper_level];
@@ -1057,6 +1058,9 @@ static int hclge_tm_schd_mode_vnet_base_cfg(struct hclge_vport *vport)
int ret;
u8 i;
+ if (vport->vport_id >= HNAE3_MAX_TC)
+ return -EINVAL;
+
ret = hclge_tm_pri_schd_mode_cfg(hdev, vport->vport_id);
if (ret)
return ret;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 131/158] ath10k: destroy sdio workqueue while remove sdio module
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Wen Gong, Kalle Valo, Sasha Levin, ath10k, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]
The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index cb527a21f1ac..686759b5613f 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2073,6 +2073,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
cancel_work_sync(&ar_sdio->wr_async_work);
ath10k_core_unregister(ar);
ath10k_core_destroy(ar);
+
+ flush_workqueue(ar_sdio->workqueue);
+ destroy_workqueue(ar_sdio->workqueue);
}
static const struct sdio_device_id ath10k_sdio_devices[] = {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 132/158] net: mvpp2: prs: Don't override the sign bit in SRAM parser shift
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maxime Chevallier, Alan Winkowski, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
[ Upstream commit 8ec3ede559956f8ad58db7b57d25ac724bab69e9 ]
The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.
This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.
This shift can be negative in some cases, such as in IPv6 parsing.
This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index ae2240074d8e..5692c6087bbb 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -312,7 +312,8 @@ static void mvpp2_prs_sram_shift_set(struct mvpp2_prs_entry *pe, int shift,
}
/* Set value */
- pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] = shift & MVPP2_PRS_SRAM_SHIFT_MASK;
+ pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] |=
+ shift & MVPP2_PRS_SRAM_SHIFT_MASK;
/* Reset and set operation */
mvpp2_prs_sram_bits_clear(pe, MVPP2_PRS_SRAM_OP_SEL_SHIFT_OFFS,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 107/158] ipvs: fix tinfo memory leak in start_sync_thread
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Julian Anastasov, syzbot+7e2e50c8adfccd2e5041, Eric Biggers,
Simon Horman, Pablo Neira Ayuso, Sasha Levin, netdev, lvs-devel,
netfilter-devel, coreteam
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Julian Anastasov <ja@ssi.bg>
[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]
syzkaller reports for memory leak in start_sync_thread [1]
As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.
Fix this by releasing tinfo in the controlling code instead.
[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
hex dump (first 32 bytes):
00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
[<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
[<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
[<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
[<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
[<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
[<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
[<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
[<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/ip_vs.h | 6 +-
net/netfilter/ipvs/ip_vs_ctl.c | 4 -
net/netfilter/ipvs/ip_vs_sync.c | 134 +++++++++++++++++---------------
3 files changed, 76 insertions(+), 68 deletions(-)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index a0d2e0bb9a94..0e3c0d83bd99 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -806,11 +806,12 @@ struct ipvs_master_sync_state {
struct ip_vs_sync_buff *sync_buff;
unsigned long sync_queue_len;
unsigned int sync_queue_delay;
- struct task_struct *master_thread;
struct delayed_work master_wakeup_work;
struct netns_ipvs *ipvs;
};
+struct ip_vs_sync_thread_data;
+
/* How much time to keep dests in trash */
#define IP_VS_DEST_TRASH_PERIOD (120 * HZ)
@@ -941,7 +942,8 @@ struct netns_ipvs {
spinlock_t sync_lock;
struct ipvs_master_sync_state *ms;
spinlock_t sync_buff_lock;
- struct task_struct **backup_threads;
+ struct ip_vs_sync_thread_data *master_tinfo;
+ struct ip_vs_sync_thread_data *backup_tinfo;
int threads_mask;
volatile int sync_state;
struct mutex sync_mutex;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 2d4e048762f6..3df94a499126 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2382,9 +2382,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
cfg.syncid = dm->syncid;
ret = start_sync_thread(ipvs, &cfg, dm->state);
} else {
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs, dm->state);
- mutex_unlock(&ipvs->sync_mutex);
}
goto out_dec;
}
@@ -3492,10 +3490,8 @@ static int ip_vs_genl_del_daemon(struct netns_ipvs *ipvs, struct nlattr **attrs)
if (!attrs[IPVS_DAEMON_ATTR_STATE])
return -EINVAL;
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs,
nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
- mutex_unlock(&ipvs->sync_mutex);
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index d4020c5e831d..ecb71062fcb3 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -195,6 +195,7 @@ union ip_vs_sync_conn {
#define IPVS_OPT_F_PARAM (1 << (IPVS_OPT_PARAM-1))
struct ip_vs_sync_thread_data {
+ struct task_struct *task;
struct netns_ipvs *ipvs;
struct socket *sock;
char *buf;
@@ -374,8 +375,11 @@ static inline void sb_queue_tail(struct netns_ipvs *ipvs,
max(IPVS_SYNC_SEND_DELAY, 1));
ms->sync_queue_len++;
list_add_tail(&sb->list, &ms->sync_queue);
- if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE)
- wake_up_process(ms->master_thread);
+ if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
+ wake_up_process(ipvs->master_tinfo[id].task);
+ }
} else
ip_vs_sync_buff_release(sb);
spin_unlock(&ipvs->sync_lock);
@@ -1636,8 +1640,10 @@ static void master_wakeup_work_handler(struct work_struct *work)
spin_lock_bh(&ipvs->sync_lock);
if (ms->sync_queue_len &&
ms->sync_queue_delay < IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
ms->sync_queue_delay = IPVS_SYNC_WAKEUP_RATE;
- wake_up_process(ms->master_thread);
+ wake_up_process(ipvs->master_tinfo[id].task);
}
spin_unlock_bh(&ipvs->sync_lock);
}
@@ -1703,10 +1709,6 @@ static int sync_thread_master(void *data)
if (sb)
ip_vs_sync_buff_release(sb);
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo);
-
return 0;
}
@@ -1740,11 +1742,6 @@ static int sync_thread_backup(void *data)
}
}
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
-
return 0;
}
@@ -1752,8 +1749,8 @@ static int sync_thread_backup(void *data)
int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int state)
{
- struct ip_vs_sync_thread_data *tinfo = NULL;
- struct task_struct **array = NULL, *task;
+ struct ip_vs_sync_thread_data *ti = NULL, *tinfo;
+ struct task_struct *task;
struct net_device *dev;
char *name;
int (*threadfn)(void *data);
@@ -1822,7 +1819,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
threadfn = sync_thread_master;
} else if (state == IP_VS_STATE_BACKUP) {
result = -EEXIST;
- if (ipvs->backup_threads)
+ if (ipvs->backup_tinfo)
goto out_early;
ipvs->bcfg = *c;
@@ -1849,28 +1846,22 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
master_wakeup_work_handler);
ms->ipvs = ipvs;
}
- } else {
- array = kcalloc(count, sizeof(struct task_struct *),
- GFP_KERNEL);
- result = -ENOMEM;
- if (!array)
- goto out;
}
+ result = -ENOMEM;
+ ti = kcalloc(count, sizeof(struct ip_vs_sync_thread_data),
+ GFP_KERNEL);
+ if (!ti)
+ goto out;
for (id = 0; id < count; id++) {
- result = -ENOMEM;
- tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
- if (!tinfo)
- goto out;
+ tinfo = &ti[id];
tinfo->ipvs = ipvs;
- tinfo->sock = NULL;
if (state == IP_VS_STATE_BACKUP) {
+ result = -ENOMEM;
tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
GFP_KERNEL);
if (!tinfo->buf)
goto out;
- } else {
- tinfo->buf = NULL;
}
tinfo->id = id;
if (state == IP_VS_STATE_MASTER)
@@ -1885,17 +1876,15 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
result = PTR_ERR(task);
goto out;
}
- tinfo = NULL;
- if (state == IP_VS_STATE_MASTER)
- ipvs->ms[id].master_thread = task;
- else
- array[id] = task;
+ tinfo->task = task;
}
/* mark as active */
- if (state == IP_VS_STATE_BACKUP)
- ipvs->backup_threads = array;
+ if (state == IP_VS_STATE_MASTER)
+ ipvs->master_tinfo = ti;
+ else
+ ipvs->backup_tinfo = ti;
spin_lock_bh(&ipvs->sync_buff_lock);
ipvs->sync_state |= state;
spin_unlock_bh(&ipvs->sync_buff_lock);
@@ -1910,29 +1899,31 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
out:
/* We do not need RTNL lock anymore, release it here so that
- * sock_release below and in the kthreads can use rtnl_lock
- * to leave the mcast group.
+ * sock_release below can use rtnl_lock to leave the mcast group.
*/
rtnl_unlock();
- count = id;
- while (count-- > 0) {
- if (state == IP_VS_STATE_MASTER)
- kthread_stop(ipvs->ms[count].master_thread);
- else
- kthread_stop(array[count]);
+ id = min(id, count - 1);
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->task)
+ kthread_stop(tinfo->task);
+ }
}
if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
kfree(ipvs->ms);
ipvs->ms = NULL;
}
mutex_unlock(&ipvs->sync_mutex);
- if (tinfo) {
- if (tinfo->sock)
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
+
+ /* No more mutexes, release socks */
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
}
- kfree(array);
return result;
out_early:
@@ -1944,15 +1935,18 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int stop_sync_thread(struct netns_ipvs *ipvs, int state)
{
- struct task_struct **array;
+ struct ip_vs_sync_thread_data *ti, *tinfo;
int id;
int retc = -EINVAL;
IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
+ mutex_lock(&ipvs->sync_mutex);
if (state == IP_VS_STATE_MASTER) {
+ retc = -ESRCH;
if (!ipvs->ms)
- return -ESRCH;
+ goto err;
+ ti = ipvs->master_tinfo;
/*
* The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1971,38 +1965,56 @@ int stop_sync_thread(struct netns_ipvs *ipvs, int state)
struct ipvs_master_sync_state *ms = &ipvs->ms[id];
int ret;
+ tinfo = &ti[id];
pr_info("stopping master sync thread %d ...\n",
- task_pid_nr(ms->master_thread));
+ task_pid_nr(tinfo->task));
cancel_delayed_work_sync(&ms->master_wakeup_work);
- ret = kthread_stop(ms->master_thread);
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
kfree(ipvs->ms);
ipvs->ms = NULL;
+ ipvs->master_tinfo = NULL;
} else if (state == IP_VS_STATE_BACKUP) {
- if (!ipvs->backup_threads)
- return -ESRCH;
+ retc = -ESRCH;
+ if (!ipvs->backup_tinfo)
+ goto err;
+ ti = ipvs->backup_tinfo;
ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
- array = ipvs->backup_threads;
retc = 0;
for (id = ipvs->threads_mask; id >= 0; id--) {
int ret;
+ tinfo = &ti[id];
pr_info("stopping backup sync thread %d ...\n",
- task_pid_nr(array[id]));
- ret = kthread_stop(array[id]);
+ task_pid_nr(tinfo->task));
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
- kfree(array);
- ipvs->backup_threads = NULL;
+ ipvs->backup_tinfo = NULL;
+ } else {
+ goto err;
}
+ id = ipvs->threads_mask;
+ mutex_unlock(&ipvs->sync_mutex);
+
+ /* No more mutexes, release socks */
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
/* decrease the module use count */
ip_vs_use_count_dec();
+ return retc;
+err:
+ mutex_unlock(&ipvs->sync_mutex);
return retc;
}
@@ -2021,7 +2033,6 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
{
int retc;
- mutex_lock(&ipvs->sync_mutex);
retc = stop_sync_thread(ipvs, IP_VS_STATE_MASTER);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Master Daemon\n");
@@ -2029,5 +2040,4 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
retc = stop_sync_thread(ipvs, IP_VS_STATE_BACKUP);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Backup Daemon\n");
- mutex_unlock(&ipvs->sync_mutex);
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 138/158] bnx2x: Prevent ptp_task to be rescheduled indefinitely
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Guilherme G. Piccoli, Przemyslaw Hausman, Sudarsana Reddy Kalluru,
David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: "Guilherme G. Piccoli" <gpiccoli@canonical.com>
[ Upstream commit 3c91f25c2f72ba6001775a5932857c1d2131c531 ]
Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.
By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.
This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.
The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.
Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 5 ++-
.../ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 4 ++-
.../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 33 ++++++++++++++-----
.../net/ethernet/broadcom/bnx2x/bnx2x_stats.h | 3 ++
4 files changed, 34 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 5a727d4729da..e3ce29951c5e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3858,9 +3858,12 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
if (!(bp->flags & TX_TIMESTAMPING_EN)) {
+ bp->eth_stats.ptp_skip_tx_ts++;
BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n");
} else if (bp->ptp_tx_skb) {
- BNX2X_ERR("The device supports only a single outstanding packet to timestamp, this packet will not be timestamped\n");
+ bp->eth_stats.ptp_skip_tx_ts++;
+ netdev_err_once(bp->dev,
+ "Device supports only a single outstanding packet to timestamp, this packet won't be timestamped\n");
} else {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
/* schedule check for Tx timestamp */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c428b0655c26..00f9ed93360c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -182,7 +182,9 @@ static const struct {
{ STATS_OFFSET32(driver_filtered_tx_pkt),
4, false, "driver_filtered_tx_pkt" },
{ STATS_OFFSET32(eee_tx_lpi),
- 4, true, "Tx LPI entry count"}
+ 4, true, "Tx LPI entry count"},
+ { STATS_OFFSET32(ptp_skip_tx_ts),
+ 4, false, "ptp_skipped_tx_tstamp" },
};
#define BNX2X_NUM_STATS ARRAY_SIZE(bnx2x_stats_arr)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index a585f1025a58..2c9af0f420e5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -15244,11 +15244,24 @@ static void bnx2x_ptp_task(struct work_struct *work)
u32 val_seq;
u64 timestamp, ns;
struct skb_shared_hwtstamps shhwtstamps;
+ bool bail = true;
+ int i;
+
+ /* FW may take a while to complete timestamping; try a bit and if it's
+ * still not complete, may indicate an error state - bail out then.
+ */
+ for (i = 0; i < 10; i++) {
+ /* Read Tx timestamp registers */
+ val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
+ NIG_REG_P0_TLLH_PTP_BUF_SEQID);
+ if (val_seq & 0x10000) {
+ bail = false;
+ break;
+ }
+ msleep(1 << i);
+ }
- /* Read Tx timestamp registers */
- val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
- NIG_REG_P0_TLLH_PTP_BUF_SEQID);
- if (val_seq & 0x10000) {
+ if (!bail) {
/* There is a valid timestamp value */
timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB :
NIG_REG_P0_TLLH_PTP_BUF_TS_MSB);
@@ -15263,16 +15276,18 @@ static void bnx2x_ptp_task(struct work_struct *work)
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
shhwtstamps.hwtstamp = ns_to_ktime(ns);
skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps);
- dev_kfree_skb_any(bp->ptp_tx_skb);
- bp->ptp_tx_skb = NULL;
DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n",
timestamp, ns);
} else {
- DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n");
- /* Reschedule to keep checking for a valid timestamp value */
- schedule_work(&bp->ptp_task);
+ DP(BNX2X_MSG_PTP,
+ "Tx timestamp is not recorded (register read=%u)\n",
+ val_seq);
+ bp->eth_stats.ptp_skip_tx_ts++;
}
+
+ dev_kfree_skb_any(bp->ptp_tx_skb);
+ bp->ptp_tx_skb = NULL;
}
void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
index b2644ed13d06..d55e63692cf3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
@@ -207,6 +207,9 @@ struct bnx2x_eth_stats {
u32 driver_filtered_tx_pkt;
/* src: Clear-on-Read register; Will not survive PMF Migration */
u32 eee_tx_lpi;
+
+ /* PTP */
+ u32 ptp_skip_tx_ts;
};
struct bnx2x_eth_q_stats {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 141/158] bpf, libbpf, smatch: Fix potential NULL pointer dereference
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Leo Yan, Yonghong Song, Daniel Borkmann, Sasha Levin, netdev, bpf
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit 33bae185f74d49a0d7b1bfaafb8e959efce0f243 ]
Based on the following report from Smatch, fix the potential NULL
pointer dereference check:
tools/lib/bpf/libbpf.c:3493
bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
(see line 3483)
3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
3480 struct bpf_object **pobj, int *prog_fd)
3481 {
3482 struct bpf_object_open_attr open_attr = {
3483 .file = attr->file,
3484 .prog_type = attr->prog_type,
^^^^^^
3485 };
At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/libbpf.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index bdb94939fd60..a350f97e3a1a 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2293,10 +2293,7 @@ int bpf_prog_load(const char *file, enum bpf_prog_type type,
int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
struct bpf_object **pobj, int *prog_fd)
{
- struct bpf_object_open_attr open_attr = {
- .file = attr->file,
- .prog_type = attr->prog_type,
- };
+ struct bpf_object_open_attr open_attr = {};
struct bpf_program *prog, *first_prog = NULL;
enum bpf_attach_type expected_attach_type;
enum bpf_prog_type prog_type;
@@ -2309,6 +2306,9 @@ int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
if (!attr->file)
return -EINVAL;
+ open_attr.file = attr->file;
+ open_attr.prog_type = attr->prog_type;
+
obj = bpf_object__open_xattr(&open_attr);
if (IS_ERR_OR_NULL(obj))
return -ENOENT;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 142/158] selftests: bpf: fix inlines in test_lwt_seg6local
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jiri Benc, Yonghong Song, Daniel Borkmann, Sasha Levin,
linux-kselftest, netdev, bpf, clang-built-linux
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jiri Benc <jbenc@redhat.com>
[ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]
Selftests are reporting this failure in test_lwt_seg6local.sh:
+ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
Error fetching program/map!
Failed to parse eBPF program: Operation not permitted
The problem is __attribute__((always_inline)) alone is not enough to prevent
clang from inserting those functions in .text. In that case, .text is not
marked as relocateable.
See the output of objdump -h test_lwt_seg6local.o:
Idx Name Size VMA LMA File off Algn
0 .text 00003530 0000000000000000 0000000000000000 00000040 2**3
CONTENTS, ALLOC, LOAD, READONLY, CODE
This causes the iproute bpf loader to fail in bpf_fetch_prog_sec:
bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no
relocateable .text section in the file.
To fix this, convert to 'static __always_inline'.
v2: Use 'static __always_inline' instead of 'static inline
__attribute__((always_inline))'
Fixes: c99a84eac026 ("selftests/bpf: test for seg6local End.BPF action")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/test_lwt_seg6local.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.c b/tools/testing/selftests/bpf/test_lwt_seg6local.c
index 0575751bc1bc..e2f6ed0a583d 100644
--- a/tools/testing/selftests/bpf/test_lwt_seg6local.c
+++ b/tools/testing/selftests/bpf/test_lwt_seg6local.c
@@ -61,7 +61,7 @@ struct sr6_tlv_t {
unsigned char value[0];
} BPF_PACKET_HEADER;
-__attribute__((always_inline)) struct ip6_srh_t *get_srh(struct __sk_buff *skb)
+static __always_inline struct ip6_srh_t *get_srh(struct __sk_buff *skb)
{
void *cursor, *data_end;
struct ip6_srh_t *srh;
@@ -95,7 +95,7 @@ __attribute__((always_inline)) struct ip6_srh_t *get_srh(struct __sk_buff *skb)
return srh;
}
-__attribute__((always_inline))
+static __always_inline
int update_tlv_pad(struct __sk_buff *skb, uint32_t new_pad,
uint32_t old_pad, uint32_t pad_off)
{
@@ -125,7 +125,7 @@ int update_tlv_pad(struct __sk_buff *skb, uint32_t new_pad,
return 0;
}
-__attribute__((always_inline))
+static __always_inline
int is_valid_tlv_boundary(struct __sk_buff *skb, struct ip6_srh_t *srh,
uint32_t *tlv_off, uint32_t *pad_size,
uint32_t *pad_off)
@@ -184,7 +184,7 @@ int is_valid_tlv_boundary(struct __sk_buff *skb, struct ip6_srh_t *srh,
return 0;
}
-__attribute__((always_inline))
+static __always_inline
int add_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh, uint32_t tlv_off,
struct sr6_tlv_t *itlv, uint8_t tlv_size)
{
@@ -228,7 +228,7 @@ int add_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh, uint32_t tlv_off,
return update_tlv_pad(skb, new_pad, pad_size, pad_off);
}
-__attribute__((always_inline))
+static __always_inline
int delete_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh,
uint32_t tlv_off)
{
@@ -266,7 +266,7 @@ int delete_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh,
return update_tlv_pad(skb, new_pad, pad_size, pad_off);
}
-__attribute__((always_inline))
+static __always_inline
int has_egr_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh)
{
int tlv_offset = sizeof(struct ip6_t) + sizeof(struct ip6_srh_t) +
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 143/158] bonding: validate ip header before check IPPROTO_IGMP
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Cong Wang, syzbot+e5be16aa39ad6e755391, Jay Vosburgh,
Veaceslav Falico, Andy Gospodarek, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Cong Wang <xiyou.wangcong@gmail.com>
[ Upstream commit 9d1bc24b52fb8c5d859f9a47084bf1179470e04c ]
bond_xmit_roundrobin() checks for IGMP packets but it parses
the IP header even before checking skb->protocol.
We should validate the IP header with pskb_may_pull() before
using iph->protocol.
Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com
Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode")
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/bonding/bond_main.c | 37 ++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 7e162fff01ab..be0b785becd0 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3852,8 +3852,8 @@ static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
- struct iphdr *iph = ip_hdr(skb);
struct slave *slave;
+ int slave_cnt;
u32 slave_id;
/* Start with the curr_active_slave that joined the bond as the
@@ -3862,23 +3862,32 @@ static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
* send the join/membership reports. The curr_active_slave found
* will send all of this type of traffic.
*/
- if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) {
- slave = rcu_dereference(bond->curr_active_slave);
- if (slave)
- bond_dev_queue_xmit(bond, skb, slave->dev);
- else
- bond_xmit_slave_id(bond, skb, 0);
- } else {
- int slave_cnt = READ_ONCE(bond->slave_cnt);
+ if (skb->protocol == htons(ETH_P_IP)) {
+ int noff = skb_network_offset(skb);
+ struct iphdr *iph;
- if (likely(slave_cnt)) {
- slave_id = bond_rr_gen_slave_id(bond);
- bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
- } else {
- bond_tx_drop(bond_dev, skb);
+ if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
+ goto non_igmp;
+
+ iph = ip_hdr(skb);
+ if (iph->protocol == IPPROTO_IGMP) {
+ slave = rcu_dereference(bond->curr_active_slave);
+ if (slave)
+ bond_dev_queue_xmit(bond, skb, slave->dev);
+ else
+ bond_xmit_slave_id(bond, skb, 0);
+ return NETDEV_TX_OK;
}
}
+non_igmp:
+ slave_cnt = READ_ONCE(bond->slave_cnt);
+ if (likely(slave_cnt)) {
+ slave_id = bond_rr_gen_slave_id(bond);
+ bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
+ } else {
+ bond_tx_drop(bond_dev, skb);
+ }
return NETDEV_TX_OK;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 145/158] tools: bpftool: Fix json dump crash on powerpc
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jiri Olsa, Michael Petlan, Jiri Olsa, Quentin Monnet,
Jakub Kicinski, Daniel Borkmann, Sasha Levin, netdev, bpf
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jiri Olsa <jolsa@redhat.com>
[ Upstream commit aa52bcbe0e72fac36b1862db08b9c09c4caefae3 ]
Michael reported crash with by bpf program in json mode on powerpc:
# bpftool prog -p dump jited id 14
[{
"name": "0xd00000000a9aa760",
"insns": [{
"pc": "0x0",
"operation": "nop",
"operands": [null
]
},{
"pc": "0x4",
"operation": "nop",
"operands": [null
]
},{
"pc": "0x8",
"operation": "mflr",
Segmentation fault (core dumped)
The code is assuming char pointers in format, which is not always
true at least for powerpc. Fixing this by dumping the whole string
into buffer based on its format.
Please note that libopcodes code does not check return values from
fprintf callback, but as per Jakub suggestion returning -1 on allocation
failure so we do the best effort to propagate the error.
Fixes: 107f041212c1 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/bpf/bpftool/jit_disasm.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index 87439320ef70..73d7252729fa 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -10,6 +10,8 @@
* Licensed under the GNU General Public License, version 2.0 (GPLv2)
*/
+#define _GNU_SOURCE
+#include <stdio.h>
#include <stdarg.h>
#include <stdint.h>
#include <stdio.h>
@@ -51,11 +53,13 @@ static int fprintf_json(void *out, const char *fmt, ...)
char *s;
va_start(ap, fmt);
+ if (vasprintf(&s, fmt, ap) < 0)
+ return -1;
+ va_end(ap);
+
if (!oper_count) {
int i;
- s = va_arg(ap, char *);
-
/* Strip trailing spaces */
i = strlen(s) - 1;
while (s[i] == ' ')
@@ -68,11 +72,10 @@ static int fprintf_json(void *out, const char *fmt, ...)
} else if (!strcmp(fmt, ",")) {
/* Skip */
} else {
- s = va_arg(ap, char *);
jsonw_string(json_wtr, s);
oper_count++;
}
- va_end(ap);
+ free(s);
return 0;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 149/158] Bluetooth: 6lowpan: search for destination address in all peers
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Jukka Rissanen, Michael Scott, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Josua Mayer <josua.mayer@jm0.eu>
[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/6lowpan.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 4e2576fc0c59..357475cceec6 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -187,10 +187,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
}
if (!rt) {
- nexthop = &lowpan_cb(skb)->gw;
-
- if (ipv6_addr_any(nexthop))
- return NULL;
+ if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+ /* There is neither route nor gateway,
+ * probably the destination is a direct peer.
+ */
+ nexthop = daddr;
+ } else {
+ /* There is a known gateway
+ */
+ nexthop = &lowpan_cb(skb)->gw;
+ }
} else {
nexthop = rt6_nexthop(rt, daddr);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 151/158] Bluetooth: Check state in l2cap_disconnect_rsp
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Matias Karhumaa, Matti Kamunen, Ari Timonen, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Matias Karhumaa <matias.karhumaa@gmail.com>
[ Upstream commit 28261da8a26f4915aa257d12d506c6ba179d961f ]
Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.
Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.
Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499
L2CAP: Disconnection Request (0x06) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548
L2CAP: Disconnection Response (0x07) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397
L2CAP: Connection Request (0x02) ident 27 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441
L2CAP: Connection Response (0x03) ident 27 len 8
Destination CID: 65
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449
L2CAP: Configure Request (0x04) ident 19 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143
L2CAP: Disconnection Request (0x06) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073
L2CAP: Connection Request (0x02) ident 12 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371
L2CAP: Disconnection Response (0x07) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196
L2CAP: Configure Request (0x04) ident 13 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804
L2CAP: Connection Response (0x03) ident 12 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Fix is to check that channel is in state BT_DISCONN before deleting the
channel.
This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.
Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/l2cap_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 879d5432bf77..260ef5426e0c 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4384,6 +4384,12 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
l2cap_chan_lock(chan);
+ if (chan->state != BT_DISCONN) {
+ l2cap_chan_unlock(chan);
+ mutex_unlock(&conn->chan_lock);
+ return 0;
+ }
+
l2cap_chan_hold(chan);
l2cap_chan_del(chan, 0);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 153/158] Bluetooth: validate BLE connection interval updates
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: csonsino, Marcel Holtmann, Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: csonsino <csonsino@gmail.com>
[ Upstream commit c49a8682fc5d298d44e8d911f4fa14690ea9485e ]
Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.
The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.
The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.
The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.
Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_event.c | 5 +++++
net/bluetooth/l2cap_core.c | 9 ++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 3e7badb3ac2d..0adcddb211fa 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5545,6 +5545,11 @@ static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_UNKNOWN_CONN_ID);
+ if (min < hcon->le_conn_min_interval ||
+ max > hcon->le_conn_max_interval)
+ return send_conn_param_neg_reply(hdev, handle,
+ HCI_ERROR_INVALID_LL_PARAMS);
+
if (hci_check_conn_params(min, max, latency, timeout))
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_INVALID_LL_PARAMS);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 260ef5426e0c..a54dadf4a6ca 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5287,7 +5287,14 @@ static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
memset(&rsp, 0, sizeof(rsp));
- err = hci_check_conn_params(min, max, latency, to_multiplier);
+ if (min < hcon->le_conn_min_interval ||
+ max > hcon->le_conn_max_interval) {
+ BT_DBG("requested connection interval exceeds current bounds.");
+ err = -EINVAL;
+ } else {
+ err = hci_check_conn_params(min, max, latency, to_multiplier);
+ }
+
if (err)
rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
else
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 154/158] gtp: fix suspicious RCU usage
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit e198987e7dd7d3645a53875151cd6f8fc425b706 ]
gtp_encap_enable_socket() and gtp_encap_destroy() are not protected
by rcu_read_lock(). and it's not safe to write sk->sk_user_data.
This patch make these functions to use lock_sock() instead of
rcu_dereference_sk_user_data().
Test commands:
gtp-link add gtp1
Splat looks like:
[ 83.238315] =============================
[ 83.239127] WARNING: suspicious RCU usage
[ 83.239702] 5.2.0-rc6+ #49 Not tainted
[ 83.240268] -----------------------------
[ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage!
[ 83.243828]
[ 83.243828] other info that might help us debug this:
[ 83.243828]
[ 83.246325]
[ 83.246325] rcu_scheduler_active = 2, debug_locks = 1
[ 83.247314] 1 lock held by gtp-link/1008:
[ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0
[ 83.251503]
[ 83.251503] stack backtrace:
[ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49
[ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 83.254562] Call Trace:
[ 83.254995] dump_stack+0x7c/0xbb
[ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp]
[ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp]
[ 83.257161] ? memset+0x1f/0x40
[ 83.257843] gtp_newlink+0x90/0xa21 [gtp]
[ 83.258497] ? __netlink_ns_capable+0xc3/0xf0
[ 83.259260] __rtnl_newlink+0xb9f/0x11b0
[ 83.260022] ? rtnl_link_unregister+0x230/0x230
[ ... ]
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 83488f2bf7a0..f45a806b6c06 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -293,12 +293,14 @@ static void gtp_encap_destroy(struct sock *sk)
{
struct gtp_dev *gtp;
- gtp = rcu_dereference_sk_user_data(sk);
+ lock_sock(sk);
+ gtp = sk->sk_user_data;
if (gtp) {
udp_sk(sk)->encap_type = 0;
rcu_assign_sk_user_data(sk, NULL);
sock_put(sk);
}
+ release_sock(sk);
}
static void gtp_encap_disable_sock(struct sock *sk)
@@ -800,7 +802,8 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
goto out_sock;
}
- if (rcu_dereference_sk_user_data(sock->sk)) {
+ lock_sock(sock->sk);
+ if (sock->sk->sk_user_data) {
sk = ERR_PTR(-EBUSY);
goto out_sock;
}
@@ -816,6 +819,7 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
setup_udp_tunnel_sock(sock_net(sock->sk), sock, &tuncfg);
out_sock:
+ release_sock(sock->sk);
sockfd_put(sock);
return sk;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 157/158] gtp: fix use-after-free in gtp_newlink()
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit a2bed90704c68d3763bf24decb1b781a45395de8 ]
Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().
Test commands:
#SHELL 1
while :
do
for i in {1..5}
do
./gtp-link add gtp$i &
done
killall gtp-link
done
#SHELL 2
while :
do
modprobe -rv gtp
done
Splat looks like:
[ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50
[ 753.185801] Call Trace:
[ 753.186264] dump_stack+0x7c/0xbb
[ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.187583] print_address_description+0xc7/0x240
[ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189846] __kasan_report+0x12a/0x16f
[ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.191298] kasan_report+0xe/0x20
[ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.192580] ? __netlink_ns_capable+0xc3/0xf0
[ 753.193370] __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[ 753.241201] Allocated by task 7186:
[ 753.241844] save_stack+0x19/0x80
[ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 753.243192] __kmalloc+0x13e/0x300
[ 753.243764] ops_init+0xd6/0x350
[ 753.244314] register_pernet_operations+0x249/0x6f0
[ ... ]
[ 753.251770] Freed by task 7178:
[ 753.252288] save_stack+0x19/0x80
[ 753.252833] __kasan_slab_free+0x111/0x150
[ 753.253962] kfree+0xc7/0x280
[ 753.254509] ops_free_list.part.11+0x1c4/0x2d0
[ 753.255241] unregister_pernet_operations+0x262/0x390
[ ... ]
[ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[ 753.287241] ------------[ cut here ]------------
[ 753.287794] kernel BUG at lib/list_debug.c:25!
[ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50
[ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[ 753.302183] Call Trace:
[ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp]
[ 753.303037] ? __netlink_ns_capable+0xc3/0xf0
[ 753.303576] __rtnl_newlink+0xb9f/0x11b0
[ 753.304092] ? rtnl_link_unregister+0x230/0x230
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 61e9b288d2dc..d178d5bad7e4 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1385,9 +1385,9 @@ late_initcall(gtp_init);
static void __exit gtp_fini(void)
{
- unregister_pernet_subsys(>p_net_ops);
genl_unregister_family(>p_genl_family);
rtnl_link_unregister(>p_link_ops);
+ unregister_pernet_subsys(>p_net_ops);
pr_info("GTP module unloaded\n");
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 158/158] net: mvmdio: defer probe of orion-mdio if a clock is not ready
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Andrew Lunn, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Josua Mayer <josua@solid-run.com>
[ Upstream commit 433a06d7d74e677c40b1148c70c48677ff62fb6b ]
Defer probing of the orion-mdio interface when getting a clock returns
EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used
before all clocks have been enabled.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvmdio.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index c5dac6bd2be4..903836e334d8 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -321,6 +321,10 @@ static int orion_mdio_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
dev->clk[i] = of_clk_get(pdev->dev.of_node, i);
+ if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto out_clk;
+ }
if (IS_ERR(dev->clk[i]))
break;
clk_prepare_enable(dev->clk[i]);
@@ -362,6 +366,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
if (dev->err_interrupt > 0)
writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
+out_clk:
for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
if (IS_ERR(dev->clk[i]))
break;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 156/158] gtp: fix use-after-free in gtp_encap_destroy()
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 1788b8569f5de27da09087fa3f6580d2aa04cc75 ]
gtp_encap_destroy() is called twice.
1. When interface is deleted.
2. When udp socket is destroyed.
either gtp->sk0 or gtp->sk1u could be freed by sock_put() in
gtp_encap_destroy(). so, when gtp_encap_destroy() is called again,
it would uses freed sk pointer.
patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to
null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected
by rtnl_lock. so, rtnl_lock() is added.
Test command:
gtp-link add gtp1 &
killall gtp-link
ip link del gtp1
Splat looks like:
[ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0
[ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008
[ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50
[ 83.188469] Call Trace:
[ ... ]
[ 83.200126] lock_acquire+0x141/0x380
[ 83.200575] ? lock_sock_nested+0x3a/0xf0
[ 83.201069] _raw_spin_lock_bh+0x38/0x70
[ 83.201551] ? lock_sock_nested+0x3a/0xf0
[ 83.202044] lock_sock_nested+0x3a/0xf0
[ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp]
[ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp]
[ 83.203687] gtp_dellink+0x56/0x170 [gtp]
[ 83.204190] rtnl_delete_link+0xb4/0x100
[ ... ]
[ 83.236513] Allocated by task 976:
[ 83.236925] save_stack+0x19/0x80
[ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 83.237894] kmem_cache_alloc+0xd8/0x280
[ 83.238360] sk_prot_alloc.isra.42+0x50/0x200
[ 83.238874] sk_alloc+0x32/0x940
[ 83.239264] inet_create+0x283/0xc20
[ 83.239684] __sock_create+0x2dd/0x540
[ 83.240136] __sys_socket+0xca/0x1a0
[ 83.240550] __x64_sys_socket+0x6f/0xb0
[ 83.240998] do_syscall_64+0x9c/0x450
[ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 83.242061]
[ 83.242249] Freed by task 0:
[ 83.242616] save_stack+0x19/0x80
[ 83.243013] __kasan_slab_free+0x111/0x150
[ 83.243498] kmem_cache_free+0x89/0x250
[ 83.244444] __sk_destruct+0x38f/0x5a0
[ 83.245366] rcu_core+0x7e9/0x1c20
[ 83.245766] __do_softirq+0x213/0x8fa
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 6f1ad7ccaea6..61e9b288d2dc 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -289,13 +289,17 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb)
return gtp_rx(pctx, skb, hdrlen, gtp->role);
}
-static void gtp_encap_destroy(struct sock *sk)
+static void __gtp_encap_destroy(struct sock *sk)
{
struct gtp_dev *gtp;
lock_sock(sk);
gtp = sk->sk_user_data;
if (gtp) {
+ if (gtp->sk0 == sk)
+ gtp->sk0 = NULL;
+ else
+ gtp->sk1u = NULL;
udp_sk(sk)->encap_type = 0;
rcu_assign_sk_user_data(sk, NULL);
sock_put(sk);
@@ -303,12 +307,19 @@ static void gtp_encap_destroy(struct sock *sk)
release_sock(sk);
}
+static void gtp_encap_destroy(struct sock *sk)
+{
+ rtnl_lock();
+ __gtp_encap_destroy(sk);
+ rtnl_unlock();
+}
+
static void gtp_encap_disable_sock(struct sock *sk)
{
if (!sk)
return;
- gtp_encap_destroy(sk);
+ __gtp_encap_destroy(sk);
}
static void gtp_encap_disable(struct gtp_dev *gtp)
@@ -1047,6 +1058,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
+ rtnl_lock();
rcu_read_lock();
gtp = gtp_find_dev(sock_net(skb->sk), info->attrs);
@@ -1071,6 +1083,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
out_unlock:
rcu_read_unlock();
+ rtnl_unlock();
return err;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 155/158] gtp: fix Illegal context switch in RCU read-side critical section.
From: Sasha Levin @ 2019-07-15 14:18 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 3f167e1921865b379a9becf03828e7202c7b4917 ]
ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.
Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2
Splat looks like:
[ 130.618881] =============================
[ 130.626382] WARNING: suspicious RCU usage
[ 130.626994] 5.2.0-rc6+ #50 Not tainted
[ 130.627622] -----------------------------
[ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[ 130.629684]
[ 130.629684] other info that might help us debug this:
[ 130.629684]
[ 130.631022]
[ 130.631022] rcu_scheduler_active = 2, debug_locks = 1
[ 130.632136] 4 locks held by gtp-tunnel/1025:
[ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[ 130.638348]
[ 130.638348] stack backtrace:
[ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[ 130.641318] Call Trace:
[ 130.641707] dump_stack+0x7c/0xbb
[ 130.642252] ___might_sleep+0x2c0/0x3b0
[ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0
[ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[ 130.644371] genl_family_rcv_msg+0x63a/0x1030
[ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090
[ 130.645845] ? genl_unregister_family+0x630/0x630
[ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0
[ 130.647293] ? check_flags.part.40+0x440/0x440
[ 130.648099] genl_rcv_msg+0xa3/0x130
[ ... ]
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index f45a806b6c06..6f1ad7ccaea6 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -958,7 +958,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
}
- pctx = kmalloc(sizeof(struct pdp_ctx), GFP_KERNEL);
+ pctx = kmalloc(sizeof(*pctx), GFP_ATOMIC);
if (pctx == NULL)
return -ENOMEM;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read
From: Sasha Levin @ 2019-07-15 14:26 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Gustavo A. R. Silva, Maya Erez, Kalle Valo, Sasha Levin,
linux-wireless, wil6210, netdev
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
[ Upstream commit bfabdd6997323adbedccb13a3fed1967fb8cf8f5 ]
Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:
enum gro_result {
GRO_MERGED,
GRO_MERGED_FREE,
GRO_HELD,
GRO_NORMAL,
GRO_DROP,
GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;
In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:
wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
len, gro_res_str[rc]);
Fix this by adding element "GRO_CONSUMED" to array gro_res_str.
Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b5055 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/txrx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 389c718cd257..16750056b8b5 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -732,6 +732,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
[GRO_HELD] = "GRO_HELD",
[GRO_NORMAL] = "GRO_NORMAL",
[GRO_DROP] = "GRO_DROP",
+ [GRO_CONSUMED] = "GRO_CONSUMED",
};
if (ndev->features & NETIF_F_RXHASH)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.14 004/105] ath6kl: add some bounds checking
From: Sasha Levin @ 2019-07-15 14:26 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dan Carpenter, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715142839.9896-1-sashal@kernel.org>
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab ]
The "ev->traffic_class" and "reply->ac" variables come from the network
and they're used as an offset into the wmi->stream_exist_for_ac[] array.
Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[]
array only has WMM_NUM_AC (4) elements. We need to add a couple bounds
checks to prevent array overflows.
I also modified one existing check from "if (traffic_class > 3) {" to
"if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent.
Fixes: bdcd81707973 (" Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath6kl/wmi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index bfc20b45b806..d79c2bccf582 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1178,6 +1178,10 @@ static int ath6kl_wmi_pstream_timeout_event_rx(struct wmi *wmi, u8 *datap,
return -EINVAL;
ev = (struct wmi_pstream_timeout_event *) datap;
+ if (ev->traffic_class >= WMM_NUM_AC) {
+ ath6kl_err("invalid traffic class: %d\n", ev->traffic_class);
+ return -EINVAL;
+ }
/*
* When the pstream (fat pipe == AC) timesout, it means there were
@@ -1519,6 +1523,10 @@ static int ath6kl_wmi_cac_event_rx(struct wmi *wmi, u8 *datap, int len,
return -EINVAL;
reply = (struct wmi_cac_event *) datap;
+ if (reply->ac >= WMM_NUM_AC) {
+ ath6kl_err("invalid AC: %d\n", reply->ac);
+ return -EINVAL;
+ }
if ((reply->cac_indication == CAC_INDICATION_ADMISSION_RESP) &&
(reply->status_code != IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED)) {
@@ -2635,7 +2643,7 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
u16 active_tsids = 0;
int ret;
- if (traffic_class > 3) {
+ if (traffic_class >= WMM_NUM_AC) {
ath6kl_err("invalid traffic class: %d\n", traffic_class);
return -EINVAL;
}
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox