* [PATCH AUTOSEL 4.19 138/158] bnx2x: Prevent ptp_task to be rescheduled indefinitely
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Guilherme G. Piccoli, Przemyslaw Hausman, Sudarsana Reddy Kalluru,
David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: "Guilherme G. Piccoli" <gpiccoli@canonical.com>
[ Upstream commit 3c91f25c2f72ba6001775a5932857c1d2131c531 ]
Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.
By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.
This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.
The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.
Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 5 ++-
.../ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 4 ++-
.../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 33 ++++++++++++++-----
.../net/ethernet/broadcom/bnx2x/bnx2x_stats.h | 3 ++
4 files changed, 34 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 5a727d4729da..e3ce29951c5e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3858,9 +3858,12 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
if (!(bp->flags & TX_TIMESTAMPING_EN)) {
+ bp->eth_stats.ptp_skip_tx_ts++;
BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n");
} else if (bp->ptp_tx_skb) {
- BNX2X_ERR("The device supports only a single outstanding packet to timestamp, this packet will not be timestamped\n");
+ bp->eth_stats.ptp_skip_tx_ts++;
+ netdev_err_once(bp->dev,
+ "Device supports only a single outstanding packet to timestamp, this packet won't be timestamped\n");
} else {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
/* schedule check for Tx timestamp */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c428b0655c26..00f9ed93360c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -182,7 +182,9 @@ static const struct {
{ STATS_OFFSET32(driver_filtered_tx_pkt),
4, false, "driver_filtered_tx_pkt" },
{ STATS_OFFSET32(eee_tx_lpi),
- 4, true, "Tx LPI entry count"}
+ 4, true, "Tx LPI entry count"},
+ { STATS_OFFSET32(ptp_skip_tx_ts),
+ 4, false, "ptp_skipped_tx_tstamp" },
};
#define BNX2X_NUM_STATS ARRAY_SIZE(bnx2x_stats_arr)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index a585f1025a58..2c9af0f420e5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -15244,11 +15244,24 @@ static void bnx2x_ptp_task(struct work_struct *work)
u32 val_seq;
u64 timestamp, ns;
struct skb_shared_hwtstamps shhwtstamps;
+ bool bail = true;
+ int i;
+
+ /* FW may take a while to complete timestamping; try a bit and if it's
+ * still not complete, may indicate an error state - bail out then.
+ */
+ for (i = 0; i < 10; i++) {
+ /* Read Tx timestamp registers */
+ val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
+ NIG_REG_P0_TLLH_PTP_BUF_SEQID);
+ if (val_seq & 0x10000) {
+ bail = false;
+ break;
+ }
+ msleep(1 << i);
+ }
- /* Read Tx timestamp registers */
- val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
- NIG_REG_P0_TLLH_PTP_BUF_SEQID);
- if (val_seq & 0x10000) {
+ if (!bail) {
/* There is a valid timestamp value */
timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB :
NIG_REG_P0_TLLH_PTP_BUF_TS_MSB);
@@ -15263,16 +15276,18 @@ static void bnx2x_ptp_task(struct work_struct *work)
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
shhwtstamps.hwtstamp = ns_to_ktime(ns);
skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps);
- dev_kfree_skb_any(bp->ptp_tx_skb);
- bp->ptp_tx_skb = NULL;
DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n",
timestamp, ns);
} else {
- DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n");
- /* Reschedule to keep checking for a valid timestamp value */
- schedule_work(&bp->ptp_task);
+ DP(BNX2X_MSG_PTP,
+ "Tx timestamp is not recorded (register read=%u)\n",
+ val_seq);
+ bp->eth_stats.ptp_skip_tx_ts++;
}
+
+ dev_kfree_skb_any(bp->ptp_tx_skb);
+ bp->ptp_tx_skb = NULL;
}
void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
index b2644ed13d06..d55e63692cf3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
@@ -207,6 +207,9 @@ struct bnx2x_eth_stats {
u32 driver_filtered_tx_pkt;
/* src: Clear-on-Read register; Will not survive PMF Migration */
u32 eee_tx_lpi;
+
+ /* PTP */
+ u32 ptp_skip_tx_ts;
};
struct bnx2x_eth_q_stats {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 107/158] ipvs: fix tinfo memory leak in start_sync_thread
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Julian Anastasov, syzbot+7e2e50c8adfccd2e5041, Eric Biggers,
Simon Horman, Pablo Neira Ayuso, Sasha Levin, netdev, lvs-devel,
netfilter-devel, coreteam
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Julian Anastasov <ja@ssi.bg>
[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]
syzkaller reports for memory leak in start_sync_thread [1]
As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.
Fix this by releasing tinfo in the controlling code instead.
[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
hex dump (first 32 bytes):
00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
[<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
[<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
[<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
[<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
[<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
[<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
[<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
[<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/ip_vs.h | 6 +-
net/netfilter/ipvs/ip_vs_ctl.c | 4 -
net/netfilter/ipvs/ip_vs_sync.c | 134 +++++++++++++++++---------------
3 files changed, 76 insertions(+), 68 deletions(-)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index a0d2e0bb9a94..0e3c0d83bd99 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -806,11 +806,12 @@ struct ipvs_master_sync_state {
struct ip_vs_sync_buff *sync_buff;
unsigned long sync_queue_len;
unsigned int sync_queue_delay;
- struct task_struct *master_thread;
struct delayed_work master_wakeup_work;
struct netns_ipvs *ipvs;
};
+struct ip_vs_sync_thread_data;
+
/* How much time to keep dests in trash */
#define IP_VS_DEST_TRASH_PERIOD (120 * HZ)
@@ -941,7 +942,8 @@ struct netns_ipvs {
spinlock_t sync_lock;
struct ipvs_master_sync_state *ms;
spinlock_t sync_buff_lock;
- struct task_struct **backup_threads;
+ struct ip_vs_sync_thread_data *master_tinfo;
+ struct ip_vs_sync_thread_data *backup_tinfo;
int threads_mask;
volatile int sync_state;
struct mutex sync_mutex;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 2d4e048762f6..3df94a499126 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2382,9 +2382,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
cfg.syncid = dm->syncid;
ret = start_sync_thread(ipvs, &cfg, dm->state);
} else {
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs, dm->state);
- mutex_unlock(&ipvs->sync_mutex);
}
goto out_dec;
}
@@ -3492,10 +3490,8 @@ static int ip_vs_genl_del_daemon(struct netns_ipvs *ipvs, struct nlattr **attrs)
if (!attrs[IPVS_DAEMON_ATTR_STATE])
return -EINVAL;
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs,
nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
- mutex_unlock(&ipvs->sync_mutex);
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index d4020c5e831d..ecb71062fcb3 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -195,6 +195,7 @@ union ip_vs_sync_conn {
#define IPVS_OPT_F_PARAM (1 << (IPVS_OPT_PARAM-1))
struct ip_vs_sync_thread_data {
+ struct task_struct *task;
struct netns_ipvs *ipvs;
struct socket *sock;
char *buf;
@@ -374,8 +375,11 @@ static inline void sb_queue_tail(struct netns_ipvs *ipvs,
max(IPVS_SYNC_SEND_DELAY, 1));
ms->sync_queue_len++;
list_add_tail(&sb->list, &ms->sync_queue);
- if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE)
- wake_up_process(ms->master_thread);
+ if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
+ wake_up_process(ipvs->master_tinfo[id].task);
+ }
} else
ip_vs_sync_buff_release(sb);
spin_unlock(&ipvs->sync_lock);
@@ -1636,8 +1640,10 @@ static void master_wakeup_work_handler(struct work_struct *work)
spin_lock_bh(&ipvs->sync_lock);
if (ms->sync_queue_len &&
ms->sync_queue_delay < IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
ms->sync_queue_delay = IPVS_SYNC_WAKEUP_RATE;
- wake_up_process(ms->master_thread);
+ wake_up_process(ipvs->master_tinfo[id].task);
}
spin_unlock_bh(&ipvs->sync_lock);
}
@@ -1703,10 +1709,6 @@ static int sync_thread_master(void *data)
if (sb)
ip_vs_sync_buff_release(sb);
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo);
-
return 0;
}
@@ -1740,11 +1742,6 @@ static int sync_thread_backup(void *data)
}
}
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
-
return 0;
}
@@ -1752,8 +1749,8 @@ static int sync_thread_backup(void *data)
int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int state)
{
- struct ip_vs_sync_thread_data *tinfo = NULL;
- struct task_struct **array = NULL, *task;
+ struct ip_vs_sync_thread_data *ti = NULL, *tinfo;
+ struct task_struct *task;
struct net_device *dev;
char *name;
int (*threadfn)(void *data);
@@ -1822,7 +1819,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
threadfn = sync_thread_master;
} else if (state == IP_VS_STATE_BACKUP) {
result = -EEXIST;
- if (ipvs->backup_threads)
+ if (ipvs->backup_tinfo)
goto out_early;
ipvs->bcfg = *c;
@@ -1849,28 +1846,22 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
master_wakeup_work_handler);
ms->ipvs = ipvs;
}
- } else {
- array = kcalloc(count, sizeof(struct task_struct *),
- GFP_KERNEL);
- result = -ENOMEM;
- if (!array)
- goto out;
}
+ result = -ENOMEM;
+ ti = kcalloc(count, sizeof(struct ip_vs_sync_thread_data),
+ GFP_KERNEL);
+ if (!ti)
+ goto out;
for (id = 0; id < count; id++) {
- result = -ENOMEM;
- tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
- if (!tinfo)
- goto out;
+ tinfo = &ti[id];
tinfo->ipvs = ipvs;
- tinfo->sock = NULL;
if (state == IP_VS_STATE_BACKUP) {
+ result = -ENOMEM;
tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
GFP_KERNEL);
if (!tinfo->buf)
goto out;
- } else {
- tinfo->buf = NULL;
}
tinfo->id = id;
if (state == IP_VS_STATE_MASTER)
@@ -1885,17 +1876,15 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
result = PTR_ERR(task);
goto out;
}
- tinfo = NULL;
- if (state == IP_VS_STATE_MASTER)
- ipvs->ms[id].master_thread = task;
- else
- array[id] = task;
+ tinfo->task = task;
}
/* mark as active */
- if (state == IP_VS_STATE_BACKUP)
- ipvs->backup_threads = array;
+ if (state == IP_VS_STATE_MASTER)
+ ipvs->master_tinfo = ti;
+ else
+ ipvs->backup_tinfo = ti;
spin_lock_bh(&ipvs->sync_buff_lock);
ipvs->sync_state |= state;
spin_unlock_bh(&ipvs->sync_buff_lock);
@@ -1910,29 +1899,31 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
out:
/* We do not need RTNL lock anymore, release it here so that
- * sock_release below and in the kthreads can use rtnl_lock
- * to leave the mcast group.
+ * sock_release below can use rtnl_lock to leave the mcast group.
*/
rtnl_unlock();
- count = id;
- while (count-- > 0) {
- if (state == IP_VS_STATE_MASTER)
- kthread_stop(ipvs->ms[count].master_thread);
- else
- kthread_stop(array[count]);
+ id = min(id, count - 1);
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->task)
+ kthread_stop(tinfo->task);
+ }
}
if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
kfree(ipvs->ms);
ipvs->ms = NULL;
}
mutex_unlock(&ipvs->sync_mutex);
- if (tinfo) {
- if (tinfo->sock)
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
+
+ /* No more mutexes, release socks */
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
}
- kfree(array);
return result;
out_early:
@@ -1944,15 +1935,18 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int stop_sync_thread(struct netns_ipvs *ipvs, int state)
{
- struct task_struct **array;
+ struct ip_vs_sync_thread_data *ti, *tinfo;
int id;
int retc = -EINVAL;
IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
+ mutex_lock(&ipvs->sync_mutex);
if (state == IP_VS_STATE_MASTER) {
+ retc = -ESRCH;
if (!ipvs->ms)
- return -ESRCH;
+ goto err;
+ ti = ipvs->master_tinfo;
/*
* The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1971,38 +1965,56 @@ int stop_sync_thread(struct netns_ipvs *ipvs, int state)
struct ipvs_master_sync_state *ms = &ipvs->ms[id];
int ret;
+ tinfo = &ti[id];
pr_info("stopping master sync thread %d ...\n",
- task_pid_nr(ms->master_thread));
+ task_pid_nr(tinfo->task));
cancel_delayed_work_sync(&ms->master_wakeup_work);
- ret = kthread_stop(ms->master_thread);
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
kfree(ipvs->ms);
ipvs->ms = NULL;
+ ipvs->master_tinfo = NULL;
} else if (state == IP_VS_STATE_BACKUP) {
- if (!ipvs->backup_threads)
- return -ESRCH;
+ retc = -ESRCH;
+ if (!ipvs->backup_tinfo)
+ goto err;
+ ti = ipvs->backup_tinfo;
ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
- array = ipvs->backup_threads;
retc = 0;
for (id = ipvs->threads_mask; id >= 0; id--) {
int ret;
+ tinfo = &ti[id];
pr_info("stopping backup sync thread %d ...\n",
- task_pid_nr(array[id]));
- ret = kthread_stop(array[id]);
+ task_pid_nr(tinfo->task));
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
- kfree(array);
- ipvs->backup_threads = NULL;
+ ipvs->backup_tinfo = NULL;
+ } else {
+ goto err;
}
+ id = ipvs->threads_mask;
+ mutex_unlock(&ipvs->sync_mutex);
+
+ /* No more mutexes, release socks */
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
/* decrease the module use count */
ip_vs_use_count_dec();
+ return retc;
+err:
+ mutex_unlock(&ipvs->sync_mutex);
return retc;
}
@@ -2021,7 +2033,6 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
{
int retc;
- mutex_lock(&ipvs->sync_mutex);
retc = stop_sync_thread(ipvs, IP_VS_STATE_MASTER);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Master Daemon\n");
@@ -2029,5 +2040,4 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
retc = stop_sync_thread(ipvs, IP_VS_STATE_BACKUP);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Backup Daemon\n");
- mutex_unlock(&ipvs->sync_mutex);
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 132/158] net: mvpp2: prs: Don't override the sign bit in SRAM parser shift
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maxime Chevallier, Alan Winkowski, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
[ Upstream commit 8ec3ede559956f8ad58db7b57d25ac724bab69e9 ]
The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.
This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.
This shift can be negative in some cases, such as in IPv6 parsing.
This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index ae2240074d8e..5692c6087bbb 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -312,7 +312,8 @@ static void mvpp2_prs_sram_shift_set(struct mvpp2_prs_entry *pe, int shift,
}
/* Set value */
- pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] = shift & MVPP2_PRS_SRAM_SHIFT_MASK;
+ pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] |=
+ shift & MVPP2_PRS_SRAM_SHIFT_MASK;
/* Reset and set operation */
mvpp2_prs_sram_bits_clear(pe, MVPP2_PRS_SRAM_OP_SEL_SHIFT_OFFS,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 131/158] ath10k: destroy sdio workqueue while remove sdio module
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Wen Gong, Kalle Valo, Sasha Levin, ath10k, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]
The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index cb527a21f1ac..686759b5613f 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2073,6 +2073,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
cancel_work_sync(&ar_sdio->wr_async_work);
ath10k_core_unregister(ar);
ath10k_core_destroy(ar);
+
+ flush_workqueue(ar_sdio->workqueue);
+ destroy_workqueue(ar_sdio->workqueue);
}
static const struct sdio_device_id ath10k_sdio_devices[] = {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 130/158] net: hns3: add some error checking in hclge_tm module
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yunsheng Lin, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Yunsheng Lin <linyunsheng@huawei.com>
[ Upstream commit 04f25edb48c441fc278ecc154c270f16966cbb90 ]
When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the
hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg
with vport->vport_id as pri_id, which is used as index for
hdev->tm_info.tc_info, it will cause out of bound access issue
if vport_id is equal to or larger than HNAE3_MAX_TC.
Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE.
So this patch adds two checks for above cases.
Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 48235dc2dd56..11e9259ca040 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -54,7 +54,8 @@ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
u32 tick;
/* Calc tick */
- if (shaper_level >= HCLGE_SHAPER_LVL_CNT)
+ if (shaper_level >= HCLGE_SHAPER_LVL_CNT ||
+ ir > HCLGE_ETHER_MAX_RATE)
return -EINVAL;
tick = tick_array[shaper_level];
@@ -1057,6 +1058,9 @@ static int hclge_tm_schd_mode_vnet_base_cfg(struct hclge_vport *vport)
int ret;
u8 i;
+ if (vport->vport_id >= HNAE3_MAX_TC)
+ return -EINVAL;
+
ret = hclge_tm_pri_schd_mode_cfg(hdev, vport->vport_id);
if (ret)
return ret;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 129/158] net: hns3: fix a -Wformat-nonliteral compile warning
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yonglong Liu, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Yonglong Liu <liuyonglong@huawei.com>
[ Upstream commit 18d219b783da61a6cc77581f55fc4af2fa16bc36 ]
When setting -Wformat=2, there is a compiler warning like this:
hclge_main.c:xxx:x: warning: format not a string literal and no
format arguments [-Wformat-nonliteral]
strs[i].desc);
^~~~
This patch adds missing format parameter "%s" to snprintf() to
fix it.
Fixes: 46a3df9f9718 ("Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4648c6a9d9e8..89ca69fa2b97 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -663,8 +663,7 @@ static u8 *hclge_comm_get_strings(u32 stringset,
return buff;
for (i = 0; i < size; i++) {
- snprintf(buff, ETH_GSTRING_LEN,
- strs[i].desc);
+ snprintf(buff, ETH_GSTRING_LEN, "%s", strs[i].desc);
buff = buff + ETH_GSTRING_LEN;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 121/158] wil6210: drop old event after wmi_call timeout
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ahmad Masri, Maya Erez, Kalle Valo, Sasha Levin, linux-wireless,
wil6210, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Ahmad Masri <amasri@codeaurora.org>
[ Upstream commit 1a276003111c0404f6bfeffe924c5a21f482428b ]
This change fixes a rare race condition of handling WMI events after
wmi_call expires.
wmi_recv_cmd immediately handles an event when reply_buf is defined and
a wmi_call is waiting for the event.
However, in case the wmi_call has already timed-out, there will be no
waiting/running wmi_call and the event will be queued in WMI queue and
will be handled later in wmi_event_handle.
Meanwhile, a new similar wmi_call for the same command and event may
be issued. In this case, when handling the queued event we got WARN_ON
printed.
Fixing this case as a valid timeout and drop the unexpected event.
Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/wmi.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 6e3b3031f29b..2010f771478d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2816,7 +2816,18 @@ static void wmi_event_handle(struct wil6210_priv *wil,
/* check if someone waits for this event */
if (wil->reply_id && wil->reply_id == id &&
wil->reply_mid == mid) {
- WARN_ON(wil->reply_buf);
+ if (wil->reply_buf) {
+ /* event received while wmi_call is waiting
+ * with a buffer. Such event should be handled
+ * in wmi_recv_cmd function. Handling the event
+ * here means a previous wmi_call was timeout.
+ * Drop the event and do not handle it.
+ */
+ wil_err(wil,
+ "Old event (%d, %s) while wmi_call is waiting. Drop it and Continue waiting\n",
+ id, eventid2name(id));
+ return;
+ }
wmi_evt_call_handler(vif, id, evt_data,
len - sizeof(*wmi));
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 117/158] ixgbe: Check DDM existence in transceiver before access
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Mauro S. M. Rodrigues, Jesse Brandeburg, Andrew Bowers,
Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index e5a8461fe6a9..8829bd95d0d3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3223,7 +3223,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
page_swap = true;
}
- if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+ if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+ !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
/* We have a SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 64e44e01c973..c56baad04ee6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -45,6 +45,7 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED 0x40
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 104/158] mt7601u: do not schedule rx_tasklet when the device has been disconnected
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lorenzo Bianconi, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 4079e8ccabc3b6d1b503f2376123cb515d14921f ]
Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.
[ 24.921354] usb 3-14: USB disconnect, device number 7
[ 24.921593] ------------[ cut here ]------------
[ 24.921594] RX urb mismatch
[ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #201903231635
[ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[ 24.921782] Workqueue: usb_hub_wq hub_event
[ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086
[ 24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006
[ 24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420
[ 24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8
[ 24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c
[ 24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000
[ 24.921807] FS: 0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000
[ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0
[ 24.921809] Call Trace:
[ 24.921812] <IRQ>
[ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140
[ 24.921821] usb_hcd_giveback_urb+0xca/0xe0
[ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[ 24.921834] handle_cmd_completion+0xe02/0x10d0
[ 24.921837] xhci_irq+0x274/0x4a0
[ 24.921838] xhci_msi_irq+0x11/0x20
[ 24.921851] __handle_irq_event_percpu+0x44/0x190
[ 24.921856] handle_irq_event_percpu+0x32/0x80
[ 24.921861] handle_irq_event+0x3b/0x5a
[ 24.921867] handle_edge_irq+0x80/0x190
[ 24.921874] handle_irq+0x20/0x30
[ 24.921889] do_IRQ+0x4e/0xe0
[ 24.921891] common_interrupt+0xf/0xf
[ 24.921892] </IRQ>
[ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[ 24.921354] usb 3-14: USB disconnect, device number 7
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/dma.c | 33 +++++++++++----------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 7f3e3983b781..bc36712cfffc 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -193,10 +193,23 @@ static void mt7601u_complete_rx(struct urb *urb)
struct mt7601u_rx_queue *q = &dev->rx_q;
unsigned long flags;
- spin_lock_irqsave(&dev->rx_lock, flags);
+ /* do no schedule rx tasklet if urb has been unlinked
+ * or the device has been removed
+ */
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ case -ENOENT:
+ return;
+ default:
+ dev_err_ratelimited(dev->dev, "rx urb failed: %d\n",
+ urb->status);
+ /* fall through */
+ case 0:
+ break;
+ }
- if (mt7601u_urb_has_error(urb))
- dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status);
+ spin_lock_irqsave(&dev->rx_lock, flags);
if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch"))
goto out;
@@ -363,19 +376,9 @@ int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb,
static void mt7601u_kill_rx(struct mt7601u_dev *dev)
{
int i;
- unsigned long flags;
- spin_lock_irqsave(&dev->rx_lock, flags);
-
- for (i = 0; i < dev->rx_q.entries; i++) {
- int next = dev->rx_q.end;
-
- spin_unlock_irqrestore(&dev->rx_lock, flags);
- usb_poison_urb(dev->rx_q.e[next].urb);
- spin_lock_irqsave(&dev->rx_lock, flags);
- }
-
- spin_unlock_irqrestore(&dev->rx_lock, flags);
+ for (i = 0; i < dev->rx_q.entries; i++)
+ usb_poison_urb(dev->rx_q.e[i].urb);
}
static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 109/158] ath10k: fix PCIE device wake up failed
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Miaoqing Pan, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]
Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"
The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake
Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.
But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.
Tested HW: QCA9984
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 677535b3d207..476e0535f06f 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -168,7 +168,7 @@ const struct ath10k_hw_values qca6174_values = {
};
const struct ath10k_hw_values qca99x0_values = {
- .rtc_state_val_on = 5,
+ .rtc_state_val_on = 7,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 108/158] ath10k: add missing error handling
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Claire Chang, Brian Norris, Kalle Valo, Sasha Levin, ath10k,
linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Claire Chang <tientzu@chromium.org>
[ Upstream commit 4b553f3ca4cbde67399aa3a756c37eb92145b8a1 ]
In function ath10k_sdio_mbox_rx_alloc() [sdio.c],
ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases.
This will make the driver think the allocation for skb is successful and
try to access the skb. If we enable failslab, system will easily crash with
NULL pointer dereferencing.
Call trace of CONFIG_FAILSLAB:
ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio]
process_sdio_pending_irqs+0x4c/0x174
sdio_run_irqs+0x3c/0x64
sdio_irq_work+0x1c/0x28
Fixes: d96db25d2025 ("ath10k: add initial SDIO support")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 7f61591ce0de..cb527a21f1ac 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -613,6 +613,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
full_len,
last_in_bundle,
last_in_bundle);
+ if (ret) {
+ ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
+ goto err;
+ }
}
ar_sdio->n_rx_pkts = i;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 106/158] mt7601u: fix possible memory leak when the device is disconnected
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lorenzo Bianconi, Jakub Kicinski, Kalle Valo, Sasha Levin,
linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 23377c200b2eb48a60d0f228b2a2e75ed6ee6060 ]
When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning
[ 57.480771] usb 1-1: USB disconnect, device number 2
[ 57.483451] ------------[ cut here ]------------
[ 57.483462] TX urb mismatch
[ 57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00
[ 57.483483] Modules linked in:
[ 57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72
[ 57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[ 57.483502] Workqueue: usb_hub_wq hub_event
[ 57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0
[ 57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f
[ 57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092
[ 57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c
[ 57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371
[ 57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001
[ 57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046
[ 57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078
[ 57.483548] FS: 0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000
[ 57.483550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0
[ 57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 57.483559] Call Trace:
[ 57.483561] <IRQ>
[ 57.483565] __usb_hcd_giveback_urb+0x77/0xe0
[ 57.483570] xhci_giveback_urb_in_irq.isra.0+0x8b/0x140
[ 57.483574] handle_cmd_completion+0xf5b/0x12c0
[ 57.483577] xhci_irq+0x1f6/0x1810
[ 57.483581] ? lockdep_hardirqs_on+0x9e/0x180
[ 57.483584] ? _raw_spin_unlock_irq+0x24/0x30
[ 57.483588] __handle_irq_event_percpu+0x3a/0x260
[ 57.483592] handle_irq_event_percpu+0x1c/0x60
[ 57.483595] handle_irq_event+0x2f/0x4c
[ 57.483599] handle_edge_irq+0x7e/0x1a0
[ 57.483603] handle_irq+0x17/0x20
[ 57.483607] do_IRQ+0x54/0x110
[ 57.483610] common_interrupt+0xf/0xf
[ 57.483612] </IRQ>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/dma.c | 21 ++++++++++++++++-----
drivers/net/wireless/mediatek/mt7601u/tx.c | 4 ++--
2 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index bc36712cfffc..47cebb2ec05c 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -241,14 +241,25 @@ static void mt7601u_complete_tx(struct urb *urb)
struct sk_buff *skb;
unsigned long flags;
- spin_lock_irqsave(&dev->tx_lock, flags);
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ case -ENOENT:
+ return;
+ default:
+ dev_err_ratelimited(dev->dev, "tx urb failed: %d\n",
+ urb->status);
+ /* fall through */
+ case 0:
+ break;
+ }
- if (mt7601u_urb_has_error(urb))
- dev_err(dev->dev, "Error: TX urb failed:%d\n", urb->status);
+ spin_lock_irqsave(&dev->tx_lock, flags);
if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch"))
goto out;
skb = q->e[q->start].skb;
+ q->e[q->start].skb = NULL;
trace_mt_tx_dma_done(dev, skb);
__skb_queue_tail(&dev->tx_skb_done, skb);
@@ -448,10 +459,10 @@ static void mt7601u_free_tx_queue(struct mt7601u_tx_queue *q)
{
int i;
- WARN_ON(q->used);
-
for (i = 0; i < q->entries; i++) {
usb_poison_urb(q->e[i].urb);
+ if (q->e[i].skb)
+ mt7601u_tx_status(q->dev, q->e[i].skb);
usb_free_urb(q->e[i].urb);
}
}
diff --git a/drivers/net/wireless/mediatek/mt7601u/tx.c b/drivers/net/wireless/mediatek/mt7601u/tx.c
index 3600e911a63e..4d81c45722fb 100644
--- a/drivers/net/wireless/mediatek/mt7601u/tx.c
+++ b/drivers/net/wireless/mediatek/mt7601u/tx.c
@@ -117,9 +117,9 @@ void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb)
info->status.rates[0].idx = -1;
info->flags |= IEEE80211_TX_STAT_ACK;
- spin_lock(&dev->mac_lock);
+ spin_lock_bh(&dev->mac_lock);
ieee80211_tx_status(dev->hw, skb);
- spin_unlock(&dev->mac_lock);
+ spin_unlock_bh(&dev->mac_lock);
}
static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 102/158] net: stmmac: sun8i: force select external PHY when no internal one
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Icenowy Zheng, Ondrej Jirman, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Icenowy Zheng <icenowy@aosc.io>
[ Upstream commit 0fec7e72ae1391bb2d7527efb54fe6ae88acabce ]
The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.
This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).
Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 49a896a16391..79c91526f3ec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -893,6 +893,11 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
* address. No need to mask it again.
*/
reg |= 1 << H3_EPHY_ADDR_SHIFT;
+ } else {
+ /* For SoCs without internal PHY the PHY selection bit should be
+ * set to 0 (external PHY).
+ */
+ reg &= ~H3_EPHY_SELECT;
}
if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 091/158] ipvs: defer hook registration to avoid leaks
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Julian Anastasov, syzbot+722da59ccb264bc19910, Simon Horman,
Pablo Neira Ayuso, Sasha Levin, netdev, lvs-devel,
netfilter-devel, coreteam
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Julian Anastasov <ja@ssi.bg>
[ Upstream commit cf47a0b882a4e5f6b34c7949d7b293e9287f1972 ]
syzkaller reports for memory leak when registering hooks [1]
As we moved the nf_unregister_net_hooks() call into
__ip_vs_dev_cleanup(), defer the nf_register_net_hooks()
call, so that hooks are allocated and freed from same
pernet_operations (ipvs_core_dev_ops).
[1]
BUG: memory leak
unreferenced object 0xffff88810acd8a80 (size 96):
comm "syz-executor073", pid 7254, jiffies 4294950560 (age 22.250s)
hex dump (first 32 bytes):
02 00 00 00 00 00 00 00 50 8b bb 82 ff ff ff ff ........P.......
00 00 00 00 00 00 00 00 00 77 bb 82 ff ff ff ff .........w......
backtrace:
[<0000000013db61f1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<0000000013db61f1>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<0000000013db61f1>] slab_alloc_node mm/slab.c:3269 [inline]
[<0000000013db61f1>] kmem_cache_alloc_node_trace+0x15b/0x2a0 mm/slab.c:3597
[<000000001a27307d>] __do_kmalloc_node mm/slab.c:3619 [inline]
[<000000001a27307d>] __kmalloc_node+0x38/0x50 mm/slab.c:3627
[<0000000025054add>] kmalloc_node include/linux/slab.h:590 [inline]
[<0000000025054add>] kvmalloc_node+0x4a/0xd0 mm/util.c:431
[<0000000050d1bc00>] kvmalloc include/linux/mm.h:637 [inline]
[<0000000050d1bc00>] kvzalloc include/linux/mm.h:645 [inline]
[<0000000050d1bc00>] allocate_hook_entries_size+0x3b/0x60 net/netfilter/core.c:61
[<00000000e8abe142>] nf_hook_entries_grow+0xae/0x270 net/netfilter/core.c:128
[<000000004b94797c>] __nf_register_net_hook+0x9a/0x170 net/netfilter/core.c:337
[<00000000d1545cbc>] nf_register_net_hook+0x34/0xc0 net/netfilter/core.c:464
[<00000000876c9b55>] nf_register_net_hooks+0x53/0xc0 net/netfilter/core.c:480
[<000000002ea868e0>] __ip_vs_init+0xe8/0x170 net/netfilter/ipvs/ip_vs_core.c:2280
[<000000002eb2d451>] ops_init+0x4c/0x140 net/core/net_namespace.c:130
[<000000000284ec48>] setup_net+0xde/0x230 net/core/net_namespace.c:316
[<00000000a70600fa>] copy_net_ns+0xf0/0x1e0 net/core/net_namespace.c:439
[<00000000ff26c15e>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:107
[<00000000b103dc79>] copy_namespaces+0xa1/0xe0 kernel/nsproxy.c:165
[<000000007cc008a2>] copy_process.part.0+0x11fd/0x2150 kernel/fork.c:2035
[<00000000c344af7c>] copy_process kernel/fork.c:1800 [inline]
[<00000000c344af7c>] _do_fork+0x121/0x4f0 kernel/fork.c:2369
Reported-by: syzbot+722da59ccb264bc19910@syzkaller.appspotmail.com
Fixes: 719c7d563c17 ("ipvs: Fix use-after-free in ip_vs_in")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/ipvs/ip_vs_core.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 62c0e80dcd71..a71f777d1353 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2218,7 +2218,6 @@ static const struct nf_hook_ops ip_vs_ops[] = {
static int __net_init __ip_vs_init(struct net *net)
{
struct netns_ipvs *ipvs;
- int ret;
ipvs = net_generic(net, ip_vs_net_id);
if (ipvs == NULL)
@@ -2250,17 +2249,11 @@ static int __net_init __ip_vs_init(struct net *net)
if (ip_vs_sync_net_init(ipvs) < 0)
goto sync_fail;
- ret = nf_register_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
- if (ret < 0)
- goto hook_fail;
-
return 0;
/*
* Error handling
*/
-hook_fail:
- ip_vs_sync_net_cleanup(ipvs);
sync_fail:
ip_vs_conn_net_cleanup(ipvs);
conn_fail:
@@ -2290,6 +2283,19 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
net->ipvs = NULL;
}
+static int __net_init __ip_vs_dev_init(struct net *net)
+{
+ int ret;
+
+ ret = nf_register_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
+ if (ret < 0)
+ goto hook_fail;
+ return 0;
+
+hook_fail:
+ return ret;
+}
+
static void __net_exit __ip_vs_dev_cleanup(struct net *net)
{
struct netns_ipvs *ipvs = net_ipvs(net);
@@ -2309,6 +2315,7 @@ static struct pernet_operations ipvs_core_ops = {
};
static struct pernet_operations ipvs_core_dev_ops = {
+ .init = __ip_vs_dev_init,
.exit = __ip_vs_dev_cleanup,
};
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 090/158] ipsec: select crypto ciphers for xfrm_algo
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Arnd Bergmann, Herbert Xu, Steffen Klassert, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 597179b0ba550bd83fab1a9d57c42a9343c58514 ]
kernelci.org reports failed builds on arc because of what looks
like an old missed 'select' statement:
net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs':
xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash'
I don't see this in randconfig builds on other architectures, but
it's fairly clear we want to select the hash code for it, like we
do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER
is also required even though it has not popped up in build tests.
Fixes: 17bc19702221 ("ipsec: Use skcipher and ahash when probing algorithms")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xfrm/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index 4a9ee2d83158..372c91faa283 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -14,6 +14,8 @@ config XFRM_ALGO
tristate
select XFRM
select CRYPTO
+ select CRYPTO_HASH
+ select CRYPTO_BLKCIPHER
config XFRM_USER
tristate "Transformation user configuration interface"
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 079/158] vhost_net: disable zerocopy by default
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jason Wang, Michael S . Tsirkin, David S . Miller, Sasha Levin,
kvm, virtualization, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jason Wang <jasowang@redhat.com>
[ Upstream commit 098eadce3c622c07b328d0a43dda379b38cf7c5e ]
Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.
It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.
[1] https://patchwork.kernel.org/patch/3787671/
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vhost/net.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 39155d7cc894..ae704658b528 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -36,7 +36,7 @@
#include "vhost.h"
-static int experimental_zcopytx = 1;
+static int experimental_zcopytx = 0;
module_param(experimental_zcopytx, int, 0444);
MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
" 1 -Enable; 0 - Disable");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 073/158] xfrm: fix sa selector validation
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Nicolas Dichtel, Anirudh Gupta, Herbert Xu, Steffen Klassert,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
[ Upstream commit b8d6d0079757cbd1b69724cfd1c08e2171c68cee ]
After commit b38ff4075a80, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4
In fact, the selector is not mandatory, allow the user to provide an empty
selector.
Fixes: b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xfrm/xfrm_user.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index d80d54e663c0..1484bc99a537 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -166,6 +166,9 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
}
switch (p->sel.family) {
+ case AF_UNSPEC:
+ break;
+
case AF_INET:
if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
goto out;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 070/158] net: hns3: fix for skb leak when doing selftest
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yunsheng Lin, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Yunsheng Lin <linyunsheng@huawei.com>
[ Upstream commit 8f9eed1a8791b83eb1c54c261d68424717e4111e ]
If hns3_nic_net_xmit does not return NETDEV_TX_BUSY when doing
a loopback selftest, the skb is not freed in hns3_clean_tx_ring
or hns3_nic_net_xmit, which causes skb not freed problem.
This patch fixes it by freeing skb when hns3_nic_net_xmit does
not return NETDEV_TX_OK.
Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 9684ad015c42..6a3c6b02a77c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -245,11 +245,13 @@ static int hns3_lp_run_test(struct net_device *ndev, enum hnae3_loop mode)
skb_get(skb);
tx_ret = hns3_nic_net_xmit(skb, ndev);
- if (tx_ret == NETDEV_TX_OK)
+ if (tx_ret == NETDEV_TX_OK) {
good_cnt++;
- else
+ } else {
+ kfree_skb(skb);
netdev_err(ndev, "hns3_lb_run_test xmit failed: %d\n",
tx_ret);
+ }
}
if (good_cnt != HNS3_NIC_LB_TEST_PKT_NUM) {
ret_val = HNS3_NIC_LB_TEST_TX_CNT_ERR;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 069/158] qed: iWARP - Fix tc for MPA ll2 connection
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Michal Kalderon, Ariel Elior, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Michal Kalderon <michal.kalderon@marvell.com>
[ Upstream commit cb94d52b93c74fe1f2595734fabeda9f8ae891ee ]
The driver needs to assign a lossless traffic class for the MPA ll2
connection to ensure no packets are dropped when returning from the
driver as they will never be re-transmitted by the peer.
Fixes: ae3488ff37dc ("qed: Add ll2 connection for processing unaligned MPA packets")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index b7471e48db7b..7002a660b6b4 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -2709,6 +2709,8 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
data.input.rx_num_desc = n_ooo_bufs * 2;
data.input.tx_num_desc = data.input.rx_num_desc;
data.input.tx_max_bds_per_packet = QED_IWARP_MAX_BDS_PER_FPDU;
+ data.input.tx_tc = PKT_LB_TC;
+ data.input.tx_dest = QED_LL2_TX_DEST_LB;
data.p_connection_handle = &iwarp_info->ll2_mpa_handle;
data.input.secondary_queue = true;
data.cbs = &cbs;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 051/158] ipset: Fix memory accounting for hash types on resize
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Stefano Brivio, NOYB, Jozsef Kadlecsik, Sasha Levin,
netfilter-devel, coreteam, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Stefano Brivio <sbrivio@redhat.com>
[ Upstream commit 11921796f4799ca9c61c4b22cc54d84aa69f8a35 ]
If a fresh array block is allocated during resize, the current in-memory
set size should be increased by the size of the block, not replaced by it.
Before the fix, adding entries to a hash set type, leading to a table
resize, caused an inconsistent memory size to be reported. This becomes
more obvious when swapping sets with similar sizes:
# cat hash_ip_size.sh
#!/bin/sh
FAIL_RETRIES=10
tries=0
while [ ${tries} -lt ${FAIL_RETRIES} ]; do
ipset create t1 hash:ip
for i in `seq 1 4345`; do
ipset add t1 1.2.$((i / 255)).$((i % 255))
done
t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset create t2 hash:ip
for i in `seq 1 4360`; do
ipset add t2 1.2.$((i / 255)).$((i % 255))
done
t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset swap t1 t2
t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"
ipset destroy t1
ipset destroy t2
tries=$((tries + 1))
if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then
echo "FAIL after ${tries} tries:"
echo "T1 size ${t1_init}, after swap ${t1_swap}"
echo "T2 size ${t2_init}, after swap ${t2_swap}"
exit 1
fi
done
echo "PASS"
# echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control
# ./hash_ip_size.sh
[ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa
[ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163)
[ 2035.080353] Table destroy by resize 00000000fe6551fa
FAIL after 4 tries:
T1 size 9064, after swap 71128
T2 size 71128, after swap 9064
Reported-by: NOYB <JunkYardMail1@Frontier.com>
Fixes: 9e41f26a505c ("netfilter: ipset: Count non-static extension memory for userspace")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/ipset/ip_set_hash_gen.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h
index 8a33dac4e805..ddfe06d7530b 100644
--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -625,7 +625,7 @@ mtype_resize(struct ip_set *set, bool retried)
goto cleanup;
}
m->size = AHASH_INIT_SIZE;
- extsize = ext_size(AHASH_INIT_SIZE, dsize);
+ extsize += ext_size(AHASH_INIT_SIZE, dsize);
RCU_INIT_POINTER(hbucket(t, key), m);
} else if (m->pos >= m->size) {
struct hbucket *ht;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 044/158] net: stmmac: modify default value of tx-frames
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Biao Huang, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Biao Huang <biao.huang@mediatek.com>
[ Upstream commit d2facb4b3983425f6776c24dd678a82dbe673773 ]
the default value of tx-frames is 25, it's too late when
passing tstamp to stack, then the ptp4l will fail:
ptp4l -i eth0 -f gPTP.cfg -m
ptp4l: selected /dev/ptp0 as PTP clock
ptp4l: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 1: link up
ptp4l: timed out while polling for tx timestamp
ptp4l: increasing tx_timestamp_timeout may correct this issue,
but it is likely caused by a driver bug
ptp4l: port 1: send peer delay response failed
ptp4l: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)
ptp4l tests pass when changing the tx-frames from 25 to 1 with
ethtool -C option.
It should be fine to set tx-frames default value to 1, so ptp4l will pass
by default.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 272b9ca66314..b069b3a2453b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -261,7 +261,7 @@ struct stmmac_safety_stats {
#define STMMAC_COAL_TX_TIMER 1000
#define STMMAC_MAX_COAL_TX_TICK 100000
#define STMMAC_TX_MAX_FRAMES 256
-#define STMMAC_TX_FRAMES 25
+#define STMMAC_TX_FRAMES 1
/* Packets types */
enum packets_types {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 039/158] net: hns3: set ops to null when unregister ad_dev
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Weihang Li, Peng Li, Huazhong Tan, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Weihang Li <liweihang@hisilicon.com>
[ Upstream commit 594a81b39525f0a17e92c2e0b167ae1400650380 ]
The hclge/hclgevf and hns3 module can be unloaded independently,
when hclge/hclgevf unloaded firstly, the ops of ae_dev should
be set to NULL, otherwise it will cause an use-after-free problem.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index fff5be8078ac..0594a6c3dccd 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -229,6 +229,7 @@ void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo)
ae_algo->ops->uninit_ae_dev(ae_dev);
hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+ ae_dev->ops = NULL;
}
list_del(&ae_algo->node);
@@ -316,6 +317,7 @@ void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev)
ae_algo->ops->uninit_ae_dev(ae_dev);
hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+ ae_dev->ops = NULL;
}
list_del(&ae_dev->node);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 036/158] batman-adv: Fix duplicated OGMs on NETDEV_UP
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sven Eckelmann, Linus Lüssing, Marek Lindner,
Simon Wunderlich, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Sven Eckelmann <sven@narfation.org>
[ Upstream commit 9e6b5648bbc4cd48fab62cecbb81e9cc3c6e7e88 ]
The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.
But the commit f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule
API calls") moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.
Fixes: f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule API calls")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/batman-adv/bat_iv_ogm.c | 4 ++--
net/batman-adv/hard-interface.c | 3 +++
net/batman-adv/types.h | 3 +++
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index 73bf6a93a3cf..0b7b36fa0d5c 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -2485,7 +2485,7 @@ batadv_iv_ogm_neigh_is_sob(struct batadv_neigh_node *neigh1,
return ret;
}
-static void batadv_iv_iface_activate(struct batadv_hard_iface *hard_iface)
+static void batadv_iv_iface_enabled(struct batadv_hard_iface *hard_iface)
{
/* begin scheduling originator messages on that interface */
batadv_iv_ogm_schedule(hard_iface);
@@ -2825,8 +2825,8 @@ static void batadv_iv_gw_dump(struct sk_buff *msg, struct netlink_callback *cb,
static struct batadv_algo_ops batadv_batman_iv __read_mostly = {
.name = "BATMAN_IV",
.iface = {
- .activate = batadv_iv_iface_activate,
.enable = batadv_iv_ogm_iface_enable,
+ .enabled = batadv_iv_iface_enabled,
.disable = batadv_iv_ogm_iface_disable,
.update_mac = batadv_iv_ogm_iface_update_mac,
.primary_set = batadv_iv_ogm_primary_iface_set,
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 08690d06b7be..36f0962040d1 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -821,6 +821,9 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
batadv_hardif_recalc_extra_skbroom(soft_iface);
+ if (bat_priv->algo_ops->iface.enabled)
+ bat_priv->algo_ops->iface.enabled(hard_iface);
+
out:
return 0;
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index eeee3e61c625..fdba8a144d73 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -2130,6 +2130,9 @@ struct batadv_algo_iface_ops {
/** @enable: init routing info when hard-interface is enabled */
int (*enable)(struct batadv_hard_iface *hard_iface);
+ /** @enabled: notification when hard-interface was enabled (optional) */
+ void (*enabled)(struct batadv_hard_iface *hard_iface);
+
/** @disable: de-init routing info when hard-interface is disabled */
void (*disable)(struct batadv_hard_iface *hard_iface);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 028/158] e1000e: start network tx queue only when link is up
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konstantin Khlebnikov, Alexander Duyck, Joseph Yasi, Aaron Brown,
Oleksandr Natalenko, Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[ Upstream commit d17ba0f616a08f597d9348c372d89b8c0405ccf3 ]
Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.
This patch wakes Tx queue only when NIC is ready to send packets.
This is proper fix for problem addressed by commit 0f9e980bf5ee
("e1000e: fix cyclic resets at link up with active tx").
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 31ef42a031f2..a7b5a47ab83d 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4208,7 +4208,7 @@ void e1000e_up(struct e1000_adapter *adapter)
e1000_configure_msix(adapter);
e1000_irq_enable(adapter);
- netif_start_queue(adapter->netdev);
+ /* Tx queue started by watchdog timer when link is up */
e1000e_trigger_lsc(adapter);
}
@@ -4584,6 +4584,7 @@ int e1000e_open(struct net_device *netdev)
pm_runtime_get_sync(&pdev->dev);
netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
/* allocate transmit descriptors */
err = e1000e_setup_tx_resources(adapter->tx_ring);
@@ -4644,7 +4645,6 @@ int e1000e_open(struct net_device *netdev)
e1000_irq_enable(adapter);
adapter->tx_hang_recheck = false;
- netif_start_queue(netdev);
hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
@@ -5266,6 +5266,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (phy->ops.cfg_on_link_up)
phy->ops.cfg_on_link_up(hw);
+ netif_wake_queue(netdev);
netif_carrier_on(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -5279,6 +5280,7 @@ static void e1000_watchdog_task(struct work_struct *work)
/* Link status message must follow this format */
pr_info("%s NIC Link is Down\n", adapter->netdev->name);
netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 027/158] Revert "e1000e: fix cyclic resets at link up with active tx"
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konstantin Khlebnikov, Joseph Yasi, Aaron Brown,
Oleksandr Natalenko, Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[ Upstream commit caff422ea81e144842bc44bab408d85ac449377b ]
This reverts commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61.
That change cased false-positive warning about hardware hang:
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <fffba7a7>
next_to_watch <0>
jiffies <fffbb140>
next_to_watch.status <0>
MAC Status <40080080>
PHY Status <7949>
PHY 1000BASE-T Status <0>
PHY Extended Status <3000>
PCI Status <10>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Besides warning everything works fine.
Original issue will be fixed property in following patch.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 8cd339c92c1a..31ef42a031f2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5286,13 +5286,8 @@ static void e1000_watchdog_task(struct work_struct *work)
/* 8000ES2LAN requires a Rx packet buffer work-around
* on link down event; reset the controller to flush
* the Rx packet buffer.
- *
- * If the link is lost the controller stops DMA, but
- * if there is queued Tx work it cannot be done. So
- * reset the controller to flush the Tx packet buffers.
*/
- if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
- e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
+ if (adapter->flags & FLAG_RX_NEEDS_RESTART)
adapter->flags |= FLAG_RESTART_NOW;
else
pm_schedule_suspend(netdev->dev.parent,
@@ -5315,6 +5310,14 @@ static void e1000_watchdog_task(struct work_struct *work)
adapter->gotc_old = adapter->stats.gotc;
spin_unlock(&adapter->stats64_lock);
+ /* If the link is lost the controller stops DMA, but
+ * if there is queued Tx work it cannot be done. So
+ * reset the controller to flush the Tx packet buffers.
+ */
+ if (!netif_carrier_ok(netdev) &&
+ (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+ adapter->flags |= FLAG_RESTART_NOW;
+
/* If reset is necessary, do it outside of interrupt context. */
if (adapter->flags & FLAG_RESTART_NOW) {
schedule_work(&adapter->reset_task);
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox