* [PATCH AUTOSEL 4.4 02/53] ath9k: Check for errors when reading SREV register
From: Sasha Levin @ 2019-07-15 14:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Tim Schumacher, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715144535.11636-1-sashal@kernel.org>
From: Tim Schumacher <timschumi@gmx.de>
[ Upstream commit 2f90c7e5d09437a4d8d5546feaae9f1cf48cfbe1 ]
Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Failed to read SREV register
ath: phy2: Could not read hardware revision
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++--------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 4435c7bbb625..d50e2e8bd998 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -250,8 +250,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
/* Chip Revisions */
/******************/
-static void ath9k_hw_read_revisions(struct ath_hw *ah)
+static bool ath9k_hw_read_revisions(struct ath_hw *ah)
{
+ u32 srev;
u32 val;
if (ah->get_mac_revision)
@@ -267,25 +268,33 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
val = REG_READ(ah, AR_SREV);
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
}
- return;
+ return true;
case AR9300_DEVID_AR9340:
ah->hw_version.macVersion = AR_SREV_VERSION_9340;
- return;
+ return true;
case AR9300_DEVID_QCA955X:
ah->hw_version.macVersion = AR_SREV_VERSION_9550;
- return;
+ return true;
case AR9300_DEVID_AR953X:
ah->hw_version.macVersion = AR_SREV_VERSION_9531;
- return;
+ return true;
case AR9300_DEVID_QCA956X:
ah->hw_version.macVersion = AR_SREV_VERSION_9561;
- return;
+ return true;
}
- val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+ srev = REG_READ(ah, AR_SREV);
+
+ if (srev == -EIO) {
+ ath_err(ath9k_hw_common(ah),
+ "Failed to read SREV register");
+ return false;
+ }
+
+ val = srev & AR_SREV_ID;
if (val == 0xFF) {
- val = REG_READ(ah, AR_SREV);
+ val = srev;
ah->hw_version.macVersion =
(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
@@ -304,6 +313,8 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE)
ah->is_pciexpress = true;
}
+
+ return true;
}
/************************************/
@@ -556,7 +567,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
int r = 0;
- ath9k_hw_read_revisions(ah);
+ if (!ath9k_hw_read_revisions(ah)) {
+ ath_err(common, "Could not read hardware revisions");
+ return -EOPNOTSUPP;
+ }
switch (ah->hw_version.macVersion) {
case AR_SREV_VERSION_5416_PCI:
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.4 01/53] ath10k: Do not send probe response template for mesh
From: Sasha Levin @ 2019-07-15 14:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Surabhi Vishnoi, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]
Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to
firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 398068ad0b62..5a0138c1c045 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1502,6 +1502,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 11/73] net: stmmac: dwmac1000: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 9463c445590091202659cdfdd44b236acadfbd84 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 7d19029e2564..093e58e94075 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -213,6 +213,12 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
GMAC_ADDR_LOW(reg));
reg++;
}
+
+ while (reg <= perfect_addr_number) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
#ifdef FRAME_FILTER_DEBUG
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 12/73] net: stmmac: dwmac4/5: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 0620ec6c62a5a07625b65f699adc5d1b90394ee6 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 51019b794be5..f46f2bfc2cc0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -173,14 +173,20 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
* are required
*/
value |= GMAC_PACKET_FILTER_PR;
- } else if (!netdev_uc_empty(dev)) {
- int reg = 1;
+ } else {
struct netdev_hw_addr *ha;
+ int reg = 1;
netdev_for_each_uc_addr(ha, dev) {
dwmac4_set_umac_addr(hw, ha->addr, reg);
reg++;
}
+
+ while (reg <= GMAC_MAX_PERFECT_ADDRESSES) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
writel(value, ioaddr + GMAC_PACKET_FILTER);
--
2.20.1
^ permalink raw reply related
* [PATCH 0/9] Harden list_for_each_entry_rcu() and family
From: Joel Fernandes (Google) @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Alexey Kuznetsov, Bjorn Helgaas,
Borislav Petkov, c0d1n61at3, David S. Miller, edumazet,
Greg Kroah-Hartman, Hideaki YOSHIFUJI, H. Peter Anvin,
Ingo Molnar, Jonathan Corbet, Josh Triplett, keescook,
kernel-hardening, kernel-team, Lai Jiangshan, Len Brown,
linux-acpi, linux-doc, linux-pci, linux-pm, Mathieu Desnoyers,
neilb, netdev, Oleg Nesterov, Paul E. McKenney, Pavel Machek,
peterz, Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
Hi,
This series aims to provide lockdep checking to RCU list macros for additional
kernel hardening.
RCU has a number of primitives for "consumption" of an RCU protected pointer.
Most of the time, these consumers make sure that such accesses are under a RCU
reader-section (such as rcu_dereference{,sched,bh} or under a lock, such as
with rcu_dereference_protected()).
However, there are other ways to consume RCU pointers, such as by
list_for_each_entry_rcu or hlist_for_each_enry_rcu. Unlike the rcu_dereference
family, these consumers do no lockdep checking at all. And with the growing
number of RCU list uses (1000+), it is possible for bugs to creep in and go
unnoticed which lockdep checks can catch.
Since RCU consolidation efforts last year, the different traditional RCU
flavors (preempt, bh, sched) are all consolidated. In other words, any of these
flavors can cause a reader section to occur and all of them must cease before
the reader section is considered to be unlocked. Thanks to this, we can
generically check if we are in an RCU reader. This is what patch 1 does. Note
that the list_for_each_entry_rcu and family are different from the
rcu_dereference family in that, there is no _bh or _sched version of this
macro. They are used under many different RCU reader flavors, and also SRCU.
Patch 1 adds a new internal function rcu_read_lock_any_held() which checks
if any reader section is active at all, when these macros are called. If no
reader section exists, then the optional fourth argument to
list_for_each_entry_rcu() can be a lockdep expression which is evaluated
(similar to how rcu_dereference_check() works). If no lockdep expression is
passed, and we are not in a reader, then a splat occurs. Just take off the
lockdep expression after applying the patches, by using the following diff and
see what happens:
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -55,7 +55,7 @@ static void list_add_sorted(struct pci_mmcfg_region *new)
struct pci_mmcfg_region *cfg;
/* keep list sorted by segment and starting bus number */
- list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list, pci_mmcfg_lock_held()) {
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list) {
The optional argument trick to list_for_each_entry_rcu() can also be used in
the future to possibly remove rcu_dereference_{,bh,sched}_protected() API and
we can pass an optional lockdep expression to rcu_dereference() itself. Thus
eliminating 3 more RCU APIs.
Note that some list macro wrappers already do their own lockdep checking in the
caller side. These can be eliminated in favor of the built-in lockdep checking
in the list macro that this series adds. For example, workqueue code has a
assert_rcu_or_wq_mutex() function which is called in for_each_wq(). This
series replaces that in favor of the built-in check.
Also in the future, we can extend these checks to list_entry_rcu() and other
list macros as well, if needed.
Please note that I have kept this option default-disabled under a new config:
CONFIG_PROVE_RCU_LIST. This is so that until all users are converted to pass
the optional argument, we should keep the check disabled. There are about a
1000 or so users and it is not possible to pass in the optional lockdep
expression in a single series since it is done on a case-by-case basis. I did
convert a few users in this series itself.
v2->v3: Simplified rcu-sync logic after rebase (Paul)
Added check for bh_map (Paul)
Refactored out more of the common code (Joel)
Added Oleg ack to rcu-sync patch.
v1->v2: Have assert_rcu_or_wq_mutex deleted (Daniel Jordan)
Simplify rcu_read_lock_any_held() (Peter Zijlstra)
Simplified rcu-sync logic (Oleg Nesterov)
Updated documentation and rculist comments.
Added GregKH ack.
RFC->v1:
Simplify list checking macro (Rasmus Villemoes)
Joel Fernandes (Google) (9):
rcu/update: Remove useless check for debug_locks (v1)
rcu: Add support for consolidated-RCU reader checking (v3)
rcu/sync: Remove custom check for reader-section (v2)
ipv4: add lockdep condition to fix for_each_entry (v1)
driver/core: Convert to use built-in RCU list checking (v1)
workqueue: Convert for_each_wq to use built-in list check (v2)
x86/pci: Pass lockdep condition to pcm_mmcfg_list iterator (v1)
acpi: Use built-in RCU list checking for acpi_ioremaps list (v1)
doc: Update documentation about list_for_each_entry_rcu (v1)
Documentation/RCU/lockdep.txt | 15 ++++++++---
Documentation/RCU/whatisRCU.txt | 9 ++++++-
arch/x86/pci/mmconfig-shared.c | 5 ++--
drivers/acpi/osl.c | 6 +++--
drivers/base/base.h | 1 +
drivers/base/core.c | 10 +++++++
drivers/base/power/runtime.c | 15 +++++++----
include/linux/rcu_sync.h | 4 +--
include/linux/rculist.h | 28 +++++++++++++++----
include/linux/rcupdate.h | 7 +++++
kernel/rcu/Kconfig.debug | 11 ++++++++
kernel/rcu/update.c | 48 ++++++++++++++++++---------------
kernel/workqueue.c | 10 ++-----
net/ipv4/fib_frontend.c | 3 ++-
14 files changed, 119 insertions(+), 53 deletions(-)
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply
* [PATCH 2/9] rcu: Add support for consolidated-RCU reader checking (v3)
From: Joel Fernandes (Google) @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Alexey Kuznetsov, Bjorn Helgaas,
Borislav Petkov, c0d1n61at3, David S. Miller, edumazet,
Greg Kroah-Hartman, Hideaki YOSHIFUJI, H. Peter Anvin,
Ingo Molnar, Jonathan Corbet, Josh Triplett, keescook,
kernel-hardening, kernel-team, Lai Jiangshan, Len Brown,
linux-acpi, linux-doc, linux-pci, linux-pm, Mathieu Desnoyers,
neilb, netdev, Oleg Nesterov, Paul E. McKenney, Pavel Machek,
peterz, Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
In-Reply-To: <20190715143705.117908-1-joel@joelfernandes.org>
This patch adds support for checking RCU reader sections in list
traversal macros. Optionally, if the list macro is called under SRCU or
other lock/mutex protection, then appropriate lockdep expressions can be
passed to make the checks pass.
Existing list_for_each_entry_rcu() invocations don't need to pass the
optional fourth argument (cond) unless they are under some non-RCU
protection and needs to make lockdep check pass.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
include/linux/rculist.h | 28 ++++++++++++++++++++-----
include/linux/rcupdate.h | 7 +++++++
kernel/rcu/Kconfig.debug | 11 ++++++++++
kernel/rcu/update.c | 44 ++++++++++++++++++++++++----------------
4 files changed, 67 insertions(+), 23 deletions(-)
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index e91ec9ddcd30..1048160625bb 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -40,6 +40,20 @@ static inline void INIT_LIST_HEAD_RCU(struct list_head *list)
*/
#define list_next_rcu(list) (*((struct list_head __rcu **)(&(list)->next)))
+/*
+ * Check during list traversal that we are within an RCU reader
+ */
+
+#ifdef CONFIG_PROVE_RCU_LIST
+#define __list_check_rcu(dummy, cond, ...) \
+ ({ \
+ RCU_LOCKDEP_WARN(!cond && !rcu_read_lock_any_held(), \
+ "RCU-list traversed in non-reader section!"); \
+ })
+#else
+#define __list_check_rcu(dummy, cond, ...) ({})
+#endif
+
/*
* Insert a new entry between two known consecutive entries.
*
@@ -343,14 +357,16 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_head within the struct.
+ * @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as list_add_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
-#define list_for_each_entry_rcu(pos, head, member) \
- for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
- &pos->member != (head); \
+#define list_for_each_entry_rcu(pos, head, member, cond...) \
+ for (__list_check_rcu(dummy, ## cond, 0), \
+ pos = list_entry_rcu((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
/**
@@ -616,13 +632,15 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the hlist_node within the struct.
+ * @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
-#define hlist_for_each_entry_rcu(pos, head, member) \
- for (pos = hlist_entry_safe (rcu_dereference_raw(hlist_first_rcu(head)),\
+#define hlist_for_each_entry_rcu(pos, head, member, cond...) \
+ for (__list_check_rcu(dummy, ## cond, 0), \
+ pos = hlist_entry_safe (rcu_dereference_raw(hlist_first_rcu(head)),\
typeof(*(pos)), member); \
pos; \
pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 8f7167478c1d..f3c29efdf19a 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -221,6 +221,7 @@ int debug_lockdep_rcu_enabled(void);
int rcu_read_lock_held(void);
int rcu_read_lock_bh_held(void);
int rcu_read_lock_sched_held(void);
+int rcu_read_lock_any_held(void);
#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
@@ -241,6 +242,12 @@ static inline int rcu_read_lock_sched_held(void)
{
return !preemptible();
}
+
+static inline int rcu_read_lock_any_held(void)
+{
+ return !preemptible();
+}
+
#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
#ifdef CONFIG_PROVE_RCU
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index 5ec3ea4028e2..7fbd21dbfcd0 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -8,6 +8,17 @@ menu "RCU Debugging"
config PROVE_RCU
def_bool PROVE_LOCKING
+config PROVE_RCU_LIST
+ bool "RCU list lockdep debugging"
+ depends on PROVE_RCU
+ default n
+ help
+ Enable RCU lockdep checking for list usages. By default it is
+ turned off since there are several list RCU users that still
+ need to be converted to pass a lockdep expression. To prevent
+ false-positive splats, we keep it default disabled but once all
+ users are converted, we can remove this config option.
+
config TORTURE_TEST
tristate
default n
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index 9dd5aeef6e70..b7a4e3b5fa98 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -91,14 +91,18 @@ module_param(rcu_normal_after_boot, int, 0);
* Similarly, we avoid claiming an SRCU read lock held if the current
* CPU is offline.
*/
+#define rcu_read_lock_held_common() \
+ if (!debug_lockdep_rcu_enabled()) \
+ return 1; \
+ if (!rcu_is_watching()) \
+ return 0; \
+ if (!rcu_lockdep_current_cpu_online()) \
+ return 0;
+
int rcu_read_lock_sched_held(void)
{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- if (!rcu_is_watching())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
+ rcu_read_lock_held_common();
+
return lock_is_held(&rcu_sched_lock_map) || !preemptible();
}
EXPORT_SYMBOL(rcu_read_lock_sched_held);
@@ -257,12 +261,8 @@ NOKPROBE_SYMBOL(debug_lockdep_rcu_enabled);
*/
int rcu_read_lock_held(void)
{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- if (!rcu_is_watching())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
+ rcu_read_lock_held_common();
+
return lock_is_held(&rcu_lock_map);
}
EXPORT_SYMBOL_GPL(rcu_read_lock_held);
@@ -284,16 +284,24 @@ EXPORT_SYMBOL_GPL(rcu_read_lock_held);
*/
int rcu_read_lock_bh_held(void)
{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- if (!rcu_is_watching())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
+ rcu_read_lock_held_common();
+
return in_softirq() || irqs_disabled();
}
EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
+int rcu_read_lock_any_held(void)
+{
+ rcu_read_lock_held_common();
+
+ if (lock_is_held(&rcu_lock_map) ||
+ lock_is_held(&rcu_bh_lock_map) ||
+ lock_is_held(&rcu_sched_lock_map))
+ return 1;
+ return !preemptible();
+}
+EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);
+
#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
/**
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 16/73] xfrm: Fix xfrm sel prefix length validation
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Anirudh Gupta, Anirudh Gupta, Herbert Xu, Steffen Klassert,
Sasha Levin, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Anirudh Gupta <anirudhrudr@gmail.com>
[ Upstream commit b38ff4075a80b4da5cb2202d7965332ca0efb213 ]
Family of src/dst can be different from family of selector src/dst.
Use xfrm selector family to validate address prefix length,
while verifying new sa from userspace.
Validated patch with this command:
ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \
reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \
0x1111016400000000000000000000000044440001 128 \
sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5
Fixes: 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.")
Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xfrm/xfrm_user.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index ca5c79bfd9a5..df4b7fc721f6 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -150,6 +150,22 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
err = -EINVAL;
switch (p->family) {
+ case AF_INET:
+ break;
+
+ case AF_INET6:
+#if IS_ENABLED(CONFIG_IPV6)
+ break;
+#else
+ err = -EAFNOSUPPORT;
+ goto out;
+#endif
+
+ default:
+ goto out;
+ }
+
+ switch (p->sel.family) {
case AF_INET:
if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
goto out;
--
2.20.1
^ permalink raw reply related
* [PATCH 3/9] rcu/sync: Remove custom check for reader-section (v2)
From: Joel Fernandes (Google) @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Oleg Nesterov, Alexey Kuznetsov,
Bjorn Helgaas, Borislav Petkov, c0d1n61at3, David S. Miller,
edumazet, Greg Kroah-Hartman, Hideaki YOSHIFUJI, H. Peter Anvin,
Ingo Molnar, Jonathan Corbet, Josh Triplett, keescook,
kernel-hardening, kernel-team, Lai Jiangshan, Len Brown,
linux-acpi, linux-doc, linux-pci, linux-pm, Mathieu Desnoyers,
neilb, netdev, Paul E. McKenney, Pavel Machek, peterz,
Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
In-Reply-To: <20190715143705.117908-1-joel@joelfernandes.org>
The rcu/sync code was doing its own check whether we are in a reader
section. With RCU consolidating flavors and the generic helper added in
this series, this is no longer need. We can just use the generic helper
and it results in a nice cleanup.
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
include/linux/rcu_sync.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/include/linux/rcu_sync.h b/include/linux/rcu_sync.h
index 9b83865d24f9..0027d4c8087c 100644
--- a/include/linux/rcu_sync.h
+++ b/include/linux/rcu_sync.h
@@ -31,9 +31,7 @@ struct rcu_sync {
*/
static inline bool rcu_sync_is_idle(struct rcu_sync *rsp)
{
- RCU_LOCKDEP_WARN(!rcu_read_lock_held() &&
- !rcu_read_lock_bh_held() &&
- !rcu_read_lock_sched_held(),
+ RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),
"suspicious rcu_sync_is_idle() usage");
return !READ_ONCE(rsp->gp_state); /* GP_IDLE */
}
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply related
* [PATCH 4/9] ipv4: add lockdep condition to fix for_each_entry (v1)
From: Joel Fernandes (Google) @ 2019-07-15 14:37 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Alexey Kuznetsov, Bjorn Helgaas,
Borislav Petkov, c0d1n61at3, David S. Miller, edumazet,
Greg Kroah-Hartman, Hideaki YOSHIFUJI, H. Peter Anvin,
Ingo Molnar, Jonathan Corbet, Josh Triplett, keescook,
kernel-hardening, kernel-team, Lai Jiangshan, Len Brown,
linux-acpi, linux-doc, linux-pci, linux-pm, Mathieu Desnoyers,
neilb, netdev, Oleg Nesterov, Paul E. McKenney, Pavel Machek,
peterz, Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
In-Reply-To: <20190715143705.117908-1-joel@joelfernandes.org>
Using the previous support added, use it for adding lockdep conditions
to list usage here.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
net/ipv4/fib_frontend.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 317339cd7f03..26b0fb24e2c2 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -124,7 +124,8 @@ struct fib_table *fib_get_table(struct net *net, u32 id)
h = id & (FIB_TABLE_HASHSZ - 1);
head = &net->ipv4.fib_table_hash[h];
- hlist_for_each_entry_rcu(tb, head, tb_hlist) {
+ hlist_for_each_entry_rcu(tb, head, tb_hlist,
+ lockdep_rtnl_is_held()) {
if (tb->tb_id == id)
return tb;
}
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 18/73] e1000e: start network tx queue only when link is up
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konstantin Khlebnikov, Alexander Duyck, Joseph Yasi, Aaron Brown,
Oleksandr Natalenko, Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[ Upstream commit d17ba0f616a08f597d9348c372d89b8c0405ccf3 ]
Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.
This patch wakes Tx queue only when NIC is ready to send packets.
This is proper fix for problem addressed by commit 0f9e980bf5ee
("e1000e: fix cyclic resets at link up with active tx").
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index f56f8b6e2378..a0f97c5ab6ef 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4212,7 +4212,7 @@ void e1000e_up(struct e1000_adapter *adapter)
e1000_configure_msix(adapter);
e1000_irq_enable(adapter);
- netif_start_queue(adapter->netdev);
+ /* Tx queue started by watchdog timer when link is up */
e1000e_trigger_lsc(adapter);
}
@@ -4588,6 +4588,7 @@ int e1000e_open(struct net_device *netdev)
pm_runtime_get_sync(&pdev->dev);
netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
/* allocate transmit descriptors */
err = e1000e_setup_tx_resources(adapter->tx_ring);
@@ -4648,7 +4649,6 @@ int e1000e_open(struct net_device *netdev)
e1000_irq_enable(adapter);
adapter->tx_hang_recheck = false;
- netif_start_queue(netdev);
hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
@@ -5271,6 +5271,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (phy->ops.cfg_on_link_up)
phy->ops.cfg_on_link_up(hw);
+ netif_wake_queue(netdev);
netif_carrier_on(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -5284,6 +5285,7 @@ static void e1000_watchdog_task(struct work_struct *work)
/* Link status message must follow this format */
pr_info("%s NIC Link is Down\n", adapter->netdev->name);
netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
--
2.20.1
^ permalink raw reply related
* [PATCH 6/9] workqueue: Convert for_each_wq to use built-in list check (v2)
From: Joel Fernandes (Google) @ 2019-07-15 14:37 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Alexey Kuznetsov, Bjorn Helgaas,
Borislav Petkov, c0d1n61at3, David S. Miller, edumazet,
Greg Kroah-Hartman, Hideaki YOSHIFUJI, H. Peter Anvin,
Ingo Molnar, Jonathan Corbet, Josh Triplett, keescook,
kernel-hardening, kernel-team, Lai Jiangshan, Len Brown,
linux-acpi, linux-doc, linux-pci, linux-pm, Mathieu Desnoyers,
neilb, netdev, Oleg Nesterov, Paul E. McKenney, Pavel Machek,
peterz, Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
In-Reply-To: <20190715143705.117908-1-joel@joelfernandes.org>
list_for_each_entry_rcu now has support to check for RCU reader sections
as well as lock. Just use the support in it, instead of explictly
checking in the caller.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
kernel/workqueue.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 601d61150b65..e882477ebf6e 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -364,11 +364,6 @@ static void workqueue_sysfs_unregister(struct workqueue_struct *wq);
!lockdep_is_held(&wq_pool_mutex), \
"RCU or wq_pool_mutex should be held")
-#define assert_rcu_or_wq_mutex(wq) \
- RCU_LOCKDEP_WARN(!rcu_read_lock_held() && \
- !lockdep_is_held(&wq->mutex), \
- "RCU or wq->mutex should be held")
-
#define assert_rcu_or_wq_mutex_or_pool_mutex(wq) \
RCU_LOCKDEP_WARN(!rcu_read_lock_held() && \
!lockdep_is_held(&wq->mutex) && \
@@ -425,9 +420,8 @@ static void workqueue_sysfs_unregister(struct workqueue_struct *wq);
* ignored.
*/
#define for_each_pwq(pwq, wq) \
- list_for_each_entry_rcu((pwq), &(wq)->pwqs, pwqs_node) \
- if (({ assert_rcu_or_wq_mutex(wq); false; })) { } \
- else
+ list_for_each_entry_rcu((pwq), &(wq)->pwqs, pwqs_node, \
+ lock_is_held(&(wq->mutex).dep_map))
#ifdef CONFIG_DEBUG_OBJECTS_WORK
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply related
* [PATCH 5/9] driver/core: Convert to use built-in RCU list checking (v1)
From: Joel Fernandes (Google) @ 2019-07-15 14:37 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Greg Kroah-Hartman, Alexey Kuznetsov,
Bjorn Helgaas, Borislav Petkov, c0d1n61at3, David S. Miller,
edumazet, Hideaki YOSHIFUJI, H. Peter Anvin, Ingo Molnar,
Jonathan Corbet, Josh Triplett, keescook, kernel-hardening,
kernel-team, Lai Jiangshan, Len Brown, linux-acpi, linux-doc,
linux-pci, linux-pm, Mathieu Desnoyers, neilb, netdev,
Oleg Nesterov, Paul E. McKenney, Pavel Machek, peterz,
Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
In-Reply-To: <20190715143705.117908-1-joel@joelfernandes.org>
list_for_each_entry_rcu has built-in RCU and lock checking. Make use of
it in driver core.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
drivers/base/base.h | 1 +
drivers/base/core.c | 10 ++++++++++
drivers/base/power/runtime.c | 15 ++++++++++-----
3 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/drivers/base/base.h b/drivers/base/base.h
index b405436ee28e..0d32544b6f91 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -165,6 +165,7 @@ static inline int devtmpfs_init(void) { return 0; }
/* Device links support */
extern int device_links_read_lock(void);
extern void device_links_read_unlock(int idx);
+extern int device_links_read_lock_held(void);
extern int device_links_check_suppliers(struct device *dev);
extern void device_links_driver_bound(struct device *dev);
extern void device_links_driver_cleanup(struct device *dev);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index da84a73f2ba6..85e82f38717f 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -68,6 +68,11 @@ void device_links_read_unlock(int idx)
{
srcu_read_unlock(&device_links_srcu, idx);
}
+
+int device_links_read_lock_held(void)
+{
+ return srcu_read_lock_held(&device_links_srcu);
+}
#else /* !CONFIG_SRCU */
static DECLARE_RWSEM(device_links_lock);
@@ -91,6 +96,11 @@ void device_links_read_unlock(int not_used)
{
up_read(&device_links_lock);
}
+
+int device_links_read_lock_held(void)
+{
+ return lock_is_held(&device_links_lock);
+}
#endif /* !CONFIG_SRCU */
/**
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 952a1e7057c7..7a10e8379a70 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -287,7 +287,8 @@ static int rpm_get_suppliers(struct device *dev)
{
struct device_link *link;
- list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) {
+ list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+ device_links_read_lock_held()) {
int retval;
if (!(link->flags & DL_FLAG_PM_RUNTIME) ||
@@ -309,7 +310,8 @@ static void rpm_put_suppliers(struct device *dev)
{
struct device_link *link;
- list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) {
+ list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+ device_links_read_lock_held()) {
if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND)
continue;
@@ -1640,7 +1642,8 @@ void pm_runtime_clean_up_links(struct device *dev)
idx = device_links_read_lock();
- list_for_each_entry_rcu(link, &dev->links.consumers, s_node) {
+ list_for_each_entry_rcu(link, &dev->links.consumers, s_node,
+ device_links_read_lock_held()) {
if (link->flags & DL_FLAG_STATELESS)
continue;
@@ -1662,7 +1665,8 @@ void pm_runtime_get_suppliers(struct device *dev)
idx = device_links_read_lock();
- list_for_each_entry_rcu(link, &dev->links.suppliers, c_node)
+ list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+ device_links_read_lock_held())
if (link->flags & DL_FLAG_PM_RUNTIME) {
link->supplier_preactivated = true;
refcount_inc(&link->rpm_active);
@@ -1683,7 +1687,8 @@ void pm_runtime_put_suppliers(struct device *dev)
idx = device_links_read_lock();
- list_for_each_entry_rcu(link, &dev->links.suppliers, c_node)
+ list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+ device_links_read_lock_held())
if (link->supplier_preactivated) {
link->supplier_preactivated = false;
if (refcount_dec_not_one(&link->rpm_active))
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply related
* [PATCH 8/9] acpi: Use built-in RCU list checking for acpi_ioremaps list (v1)
From: Joel Fernandes (Google) @ 2019-07-15 14:37 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Fernandes (Google), Alexey Kuznetsov, Bjorn Helgaas,
Borislav Petkov, c0d1n61at3, David S. Miller, edumazet,
Greg Kroah-Hartman, Hideaki YOSHIFUJI, H. Peter Anvin,
Ingo Molnar, Jonathan Corbet, Josh Triplett, keescook,
kernel-hardening, kernel-team, Lai Jiangshan, Len Brown,
linux-acpi, linux-doc, linux-pci, linux-pm, Mathieu Desnoyers,
neilb, netdev, Oleg Nesterov, Paul E. McKenney, Pavel Machek,
peterz, Rafael J. Wysocki, Rasmus Villemoes, rcu, Steven Rostedt,
Tejun Heo, Thomas Gleixner, will,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)
In-Reply-To: <20190715143705.117908-1-joel@joelfernandes.org>
list_for_each_entry_rcu has built-in RCU and lock checking. Make use of
it for acpi_ioremaps list traversal.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
drivers/acpi/osl.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 9c0edf2fc0dd..2f9d0d20b836 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/highmem.h>
+#include <linux/lockdep.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kmod.h>
@@ -80,6 +81,7 @@ struct acpi_ioremap {
static LIST_HEAD(acpi_ioremaps);
static DEFINE_MUTEX(acpi_ioremap_lock);
+#define acpi_ioremap_lock_held() lock_is_held(&acpi_ioremap_lock.dep_map)
static void __init acpi_request_region (struct acpi_generic_address *gas,
unsigned int length, char *desc)
@@ -206,7 +208,7 @@ acpi_map_lookup(acpi_physical_address phys, acpi_size size)
{
struct acpi_ioremap *map;
- list_for_each_entry_rcu(map, &acpi_ioremaps, list)
+ list_for_each_entry_rcu(map, &acpi_ioremaps, list, acpi_ioremap_lock_held())
if (map->phys <= phys &&
phys + size <= map->phys + map->size)
return map;
@@ -249,7 +251,7 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
{
struct acpi_ioremap *map;
- list_for_each_entry_rcu(map, &acpi_ioremaps, list)
+ list_for_each_entry_rcu(map, &acpi_ioremaps, list, acpi_ioremap_lock_held())
if (map->virt <= virt &&
virt + size <= map->virt + map->size)
return map;
--
2.22.0.510.g264f2c817a-goog
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 21/73] net: phy: Check against net_device being NULL
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ioana Ciornei, Andrew Lunn, Florian Fainelli, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Ioana Ciornei <ioana.ciornei@nxp.com>
[ Upstream commit 82c76aca81187b3d28a6fb3062f6916450ce955e ]
In general, we don't want MAC drivers calling phy_attach_direct with the
net_device being NULL. Add checks against this in all the functions
calling it: phy_attach() and phy_connect_direct().
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/phy_device.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5048a6df6a8e..5c2c72b1ef8b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -673,6 +673,9 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
{
int rc;
+ if (!dev)
+ return -EINVAL;
+
rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
if (rc)
return rc;
@@ -965,6 +968,9 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
struct device *d;
int rc;
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name
*/
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 36/73] bpf: silence warning messages in core
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Valdis Klētnieks, Andrii Nakryiko, Daniel Borkmann,
Sasha Levin, netdev, bpf
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Valdis Klētnieks <valdis.kletnieks@vt.edu>
[ Upstream commit aee450cbe482a8c2f6fa5b05b178ef8b8ff107ca ]
Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:
kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
| ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
1087 | INSN_3(ALU, ADD, X), \
| ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
| ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
| ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
1087 | INSN_3(ALU, ADD, X), \
| ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
| ^~~~~~~~~~~~
98 copies of the above.
The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/bpf/Makefile b/kernel/bpf/Makefile
index eed911d091da..5a590f22b4d4 100644
--- a/kernel/bpf/Makefile
+++ b/kernel/bpf/Makefile
@@ -1,4 +1,5 @@
obj-y := core.o
+CFLAGS_core.o += $(call cc-disable-warning, override-init)
obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o inode.o helpers.o
obj-$(CONFIG_BPF_SYSCALL) += hashtab.o arraymap.o percpu_freelist.o
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 41/73] vhost_net: disable zerocopy by default
From: Sasha Levin @ 2019-07-15 14:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jason Wang, Michael S . Tsirkin, David S . Miller, Sasha Levin,
kvm, virtualization, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Jason Wang <jasowang@redhat.com>
[ Upstream commit 098eadce3c622c07b328d0a43dda379b38cf7c5e ]
Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.
It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.
[1] https://patchwork.kernel.org/patch/3787671/
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vhost/net.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 681d0eade82f..75e1089dfb01 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -30,7 +30,7 @@
#include "vhost.h"
-static int experimental_zcopytx = 1;
+static int experimental_zcopytx = 0;
module_param(experimental_zcopytx, int, 0444);
MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
" 1 -Enable; 0 - Disable");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 54/73] ath10k: fix PCIE device wake up failed
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Miaoqing Pan, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]
Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"
The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake
Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.
But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.
Tested HW: QCA9984
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 675e75d66db2..14dc6548701c 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -157,7 +157,7 @@ const struct ath10k_hw_values qca6174_values = {
};
const struct ath10k_hw_values qca99x0_values = {
- .rtc_state_val_on = 5,
+ .rtc_state_val_on = 7,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 60/73] ixgbe: Check DDM existence in transceiver before access
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Mauro S. M. Rodrigues, Jesse Brandeburg, Andrew Bowers,
Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index a137e060c185..bbc23e88de89 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3192,7 +3192,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
page_swap = true;
}
- if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+ if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+ !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
/* We have a SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index cc735ec3e045..25090b4880b3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -70,6 +70,7 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED 0x40
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 53/73] mt7601u: fix possible memory leak when the device is disconnected
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lorenzo Bianconi, Jakub Kicinski, Kalle Valo, Sasha Levin,
linux-wireless, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 23377c200b2eb48a60d0f228b2a2e75ed6ee6060 ]
When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning
[ 57.480771] usb 1-1: USB disconnect, device number 2
[ 57.483451] ------------[ cut here ]------------
[ 57.483462] TX urb mismatch
[ 57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00
[ 57.483483] Modules linked in:
[ 57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72
[ 57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[ 57.483502] Workqueue: usb_hub_wq hub_event
[ 57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0
[ 57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f
[ 57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092
[ 57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c
[ 57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371
[ 57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001
[ 57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046
[ 57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078
[ 57.483548] FS: 0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000
[ 57.483550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0
[ 57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 57.483559] Call Trace:
[ 57.483561] <IRQ>
[ 57.483565] __usb_hcd_giveback_urb+0x77/0xe0
[ 57.483570] xhci_giveback_urb_in_irq.isra.0+0x8b/0x140
[ 57.483574] handle_cmd_completion+0xf5b/0x12c0
[ 57.483577] xhci_irq+0x1f6/0x1810
[ 57.483581] ? lockdep_hardirqs_on+0x9e/0x180
[ 57.483584] ? _raw_spin_unlock_irq+0x24/0x30
[ 57.483588] __handle_irq_event_percpu+0x3a/0x260
[ 57.483592] handle_irq_event_percpu+0x1c/0x60
[ 57.483595] handle_irq_event+0x2f/0x4c
[ 57.483599] handle_edge_irq+0x7e/0x1a0
[ 57.483603] handle_irq+0x17/0x20
[ 57.483607] do_IRQ+0x54/0x110
[ 57.483610] common_interrupt+0xf/0xf
[ 57.483612] </IRQ>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/dma.c | 21 ++++++++++++++++-----
drivers/net/wireless/mediatek/mt7601u/tx.c | 4 ++--
2 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 838ad9a4be51..56cad16e70ca 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -241,14 +241,25 @@ static void mt7601u_complete_tx(struct urb *urb)
struct sk_buff *skb;
unsigned long flags;
- spin_lock_irqsave(&dev->tx_lock, flags);
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ case -ENOENT:
+ return;
+ default:
+ dev_err_ratelimited(dev->dev, "tx urb failed: %d\n",
+ urb->status);
+ /* fall through */
+ case 0:
+ break;
+ }
- if (mt7601u_urb_has_error(urb))
- dev_err(dev->dev, "Error: TX urb failed:%d\n", urb->status);
+ spin_lock_irqsave(&dev->tx_lock, flags);
if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch"))
goto out;
skb = q->e[q->start].skb;
+ q->e[q->start].skb = NULL;
trace_mt_tx_dma_done(dev, skb);
__skb_queue_tail(&dev->tx_skb_done, skb);
@@ -448,10 +459,10 @@ static void mt7601u_free_tx_queue(struct mt7601u_tx_queue *q)
{
int i;
- WARN_ON(q->used);
-
for (i = 0; i < q->entries; i++) {
usb_poison_urb(q->e[i].urb);
+ if (q->e[i].skb)
+ mt7601u_tx_status(q->dev, q->e[i].skb);
usb_free_urb(q->e[i].urb);
}
}
diff --git a/drivers/net/wireless/mediatek/mt7601u/tx.c b/drivers/net/wireless/mediatek/mt7601u/tx.c
index ad77bec1ba0f..2cb1883c0d33 100644
--- a/drivers/net/wireless/mediatek/mt7601u/tx.c
+++ b/drivers/net/wireless/mediatek/mt7601u/tx.c
@@ -117,9 +117,9 @@ void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb)
info->status.rates[0].idx = -1;
info->flags |= IEEE80211_TX_STAT_ACK;
- spin_lock(&dev->mac_lock);
+ spin_lock_bh(&dev->mac_lock);
ieee80211_tx_status(dev->hw, skb);
- spin_unlock(&dev->mac_lock);
+ spin_unlock_bh(&dev->mac_lock);
}
static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb)
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 66/73] net: usb: asix: init MAC address buffers
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Phong Tran, syzbot+8a3fc6674bbc3978ed4e, David S . Miller,
Sasha Levin, linux-usb, netdev, clang-built-linux
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Phong Tran <tranmanphong@gmail.com>
[ Upstream commit 78226f6eaac80bf30256a33a4926c194ceefdf36 ]
This is for fixing bug KMSAN: uninit-value in ax88772_bind
Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ
Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com
syzbot found the following crash on:
HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree: kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler: clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000
==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
__msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
hub_port_connect drivers/usb/core/hub.c:5089 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
process_scheduled_works kernel/workqueue.c:2331 [inline]
worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
kthread+0x4b5/0x4f0 kernel/kthread.c:254
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/asix_devices.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 393fd3ed6b94..4b12b6da3fab 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -237,7 +237,7 @@ static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret = 0;
- u8 buf[ETH_ALEN];
+ u8 buf[ETH_ALEN] = {0};
int i;
unsigned long gpio_bits = dev->driver_info->data;
@@ -687,7 +687,7 @@ static int asix_resume(struct usb_interface *intf)
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret, i;
- u8 buf[ETH_ALEN], chipcode = 0;
+ u8 buf[ETH_ALEN] = {0}, chipcode = 0;
u32 phyid;
struct asix_common_private *priv;
@@ -1064,7 +1064,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
- u8 buf[ETH_ALEN];
+ u8 buf[ETH_ALEN] = {0};
usbnet_get_endpoints(dev,intf);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 69/73] Bluetooth: 6lowpan: search for destination address in all peers
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Jukka Rissanen, Michael Scott, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Josua Mayer <josua.mayer@jm0.eu>
[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/6lowpan.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index de7b82ece499..21096c882223 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -187,10 +187,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
}
if (!rt) {
- nexthop = &lowpan_cb(skb)->gw;
-
- if (ipv6_addr_any(nexthop))
- return NULL;
+ if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+ /* There is neither route nor gateway,
+ * probably the destination is a direct peer.
+ */
+ nexthop = daddr;
+ } else {
+ /* There is a known gateway
+ */
+ nexthop = &lowpan_cb(skb)->gw;
+ }
} else {
nexthop = rt6_nexthop(rt, daddr);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 71/73] Bluetooth: validate BLE connection interval updates
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: csonsino, Marcel Holtmann, Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: csonsino <csonsino@gmail.com>
[ Upstream commit c49a8682fc5d298d44e8d911f4fa14690ea9485e ]
Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.
The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.
The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.
The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.
Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_event.c | 5 +++++
net/bluetooth/l2cap_core.c | 9 ++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 6f78489fdb13..163a239bda91 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5089,6 +5089,11 @@ static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_UNKNOWN_CONN_ID);
+ if (min < hcon->le_conn_min_interval ||
+ max > hcon->le_conn_max_interval)
+ return send_conn_param_neg_reply(hdev, handle,
+ HCI_ERROR_INVALID_LL_PARAMS);
+
if (hci_check_conn_params(min, max, latency, timeout))
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_INVALID_LL_PARAMS);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 48d23abfe799..4912e80dacef 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5277,7 +5277,14 @@ static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
memset(&rsp, 0, sizeof(rsp));
- err = hci_check_conn_params(min, max, latency, to_multiplier);
+ if (min < hcon->le_conn_min_interval ||
+ max > hcon->le_conn_max_interval) {
+ BT_DBG("requested connection interval exceeds current bounds.");
+ err = -EINVAL;
+ } else {
+ err = hci_check_conn_params(min, max, latency, to_multiplier);
+ }
+
if (err)
rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
else
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 73/73] gtp: fix use-after-free in gtp_newlink()
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit a2bed90704c68d3763bf24decb1b781a45395de8 ]
Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().
Test commands:
#SHELL 1
while :
do
for i in {1..5}
do
./gtp-link add gtp$i &
done
killall gtp-link
done
#SHELL 2
while :
do
modprobe -rv gtp
done
Splat looks like:
[ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50
[ 753.185801] Call Trace:
[ 753.186264] dump_stack+0x7c/0xbb
[ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.187583] print_address_description+0xc7/0x240
[ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.189846] __kasan_report+0x12a/0x16f
[ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.191298] kasan_report+0xe/0x20
[ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp]
[ 753.192580] ? __netlink_ns_capable+0xc3/0xf0
[ 753.193370] __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[ 753.241201] Allocated by task 7186:
[ 753.241844] save_stack+0x19/0x80
[ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 753.243192] __kmalloc+0x13e/0x300
[ 753.243764] ops_init+0xd6/0x350
[ 753.244314] register_pernet_operations+0x249/0x6f0
[ ... ]
[ 753.251770] Freed by task 7178:
[ 753.252288] save_stack+0x19/0x80
[ 753.252833] __kasan_slab_free+0x111/0x150
[ 753.253962] kfree+0xc7/0x280
[ 753.254509] ops_free_list.part.11+0x1c4/0x2d0
[ 753.255241] unregister_pernet_operations+0x262/0x390
[ ... ]
[ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[ 753.287241] ------------[ cut here ]------------
[ 753.287794] kernel BUG at lib/list_debug.c:25!
[ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50
[ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[ 753.302183] Call Trace:
[ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp]
[ 753.303037] ? __netlink_ns_capable+0xc3/0xf0
[ 753.303576] __rtnl_newlink+0xb9f/0x11b0
[ 753.304092] ? rtnl_link_unregister+0x230/0x230
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 60df6e391ad2..7e1df403a37d 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1358,9 +1358,9 @@ late_initcall(gtp_init);
static void __exit gtp_fini(void)
{
- unregister_pernet_subsys(>p_net_ops);
genl_unregister_family(>p_genl_family);
rtnl_link_unregister(>p_link_ops);
+ unregister_pernet_subsys(>p_net_ops);
pr_info("GTP module unloaded\n");
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 72/73] gtp: fix Illegal context switch in RCU read-side critical section.
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, David S . Miller, Sasha Levin, osmocom-net-gprs,
netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 3f167e1921865b379a9becf03828e7202c7b4917 ]
ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.
Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2
Splat looks like:
[ 130.618881] =============================
[ 130.626382] WARNING: suspicious RCU usage
[ 130.626994] 5.2.0-rc6+ #50 Not tainted
[ 130.627622] -----------------------------
[ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[ 130.629684]
[ 130.629684] other info that might help us debug this:
[ 130.629684]
[ 130.631022]
[ 130.631022] rcu_scheduler_active = 2, debug_locks = 1
[ 130.632136] 4 locks held by gtp-tunnel/1025:
[ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[ 130.638348]
[ 130.638348] stack backtrace:
[ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[ 130.641318] Call Trace:
[ 130.641707] dump_stack+0x7c/0xbb
[ 130.642252] ___might_sleep+0x2c0/0x3b0
[ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0
[ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[ 130.644371] genl_family_rcv_msg+0x63a/0x1030
[ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090
[ 130.645845] ? genl_unregister_family+0x630/0x630
[ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0
[ 130.647293] ? check_flags.part.40+0x440/0x440
[ 130.648099] genl_rcv_msg+0xa3/0x130
[ ... ]
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index cb206e5526c4..60df6e391ad2 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -952,7 +952,7 @@ static int ipv4_pdp_add(struct net_device *dev, struct genl_info *info)
}
- pctx = kmalloc(sizeof(struct pdp_ctx), GFP_KERNEL);
+ pctx = kmalloc(sizeof(*pctx), GFP_ATOMIC);
if (pctx == NULL)
return -ENOMEM;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.9 70/73] Bluetooth: Check state in l2cap_disconnect_rsp
From: Sasha Levin @ 2019-07-15 14:36 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Matias Karhumaa, Matti Kamunen, Ari Timonen, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: Matias Karhumaa <matias.karhumaa@gmail.com>
[ Upstream commit 28261da8a26f4915aa257d12d506c6ba179d961f ]
Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.
Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.
Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062
Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499
L2CAP: Disconnection Request (0x06) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548
L2CAP: Disconnection Response (0x07) ident 26 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397
L2CAP: Connection Request (0x02) ident 27 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441
L2CAP: Connection Response (0x03) ident 27 len 8
Destination CID: 65
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449
L2CAP: Configure Request (0x04) ident 19 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x03 cr 1 dlci 0x00
Control: 0x53 poll/final 1
Length: 0
FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136
Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143
L2CAP: Disconnection Request (0x06) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674
L2CAP: Disconnection Request (0x06) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762
L2CAP: Disconnection Response (0x07) ident 17 len 4
Destination CID: 65
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073
L2CAP: Connection Request (0x02) ident 12 len 4
PSM: 1 (0x0001)
Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371
L2CAP: Disconnection Response (0x07) ident 11 len 4
Destination CID: 65
Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082
Num handles: 1
Handle: 43
Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040
Num handles: 1
Handle: 43
Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 3 (0x0003)
Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196
L2CAP: Configure Request (0x04) ident 13 len 19
Destination CID: 65
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 1013
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Basic (0x00)
TX window size: 0
Max transmit: 0
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804
L2CAP: Connection Response (0x03) ident 12 len 8
Destination CID: 66
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
*snip*
Fix is to check that channel is in state BT_DISCONN before deleting the
channel.
This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.
Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/l2cap_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index ec9b5d159591..48d23abfe799 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4374,6 +4374,12 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
l2cap_chan_lock(chan);
+ if (chan->state != BT_DISCONN) {
+ l2cap_chan_unlock(chan);
+ mutex_unlock(&conn->chan_lock);
+ return 0;
+ }
+
l2cap_chan_hold(chan);
l2cap_chan_del(chan, 0);
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox