* [PATCH AUTOSEL 5.1 143/219] ipvs: fix tinfo memory leak in start_sync_thread
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Julian Anastasov, syzbot+7e2e50c8adfccd2e5041, Eric Biggers,
Simon Horman, Pablo Neira Ayuso, Sasha Levin, netdev, lvs-devel,
netfilter-devel, coreteam
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Julian Anastasov <ja@ssi.bg>
[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]
syzkaller reports for memory leak in start_sync_thread [1]
As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.
Fix this by releasing tinfo in the controlling code instead.
[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
hex dump (first 32 bytes):
00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
[<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
[<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
[<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
[<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
[<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
[<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
[<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
[<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/ip_vs.h | 6 +-
net/netfilter/ipvs/ip_vs_ctl.c | 4 -
net/netfilter/ipvs/ip_vs_sync.c | 134 +++++++++++++++++---------------
3 files changed, 76 insertions(+), 68 deletions(-)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 047f9a5ccaad..1790bb41c964 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -803,11 +803,12 @@ struct ipvs_master_sync_state {
struct ip_vs_sync_buff *sync_buff;
unsigned long sync_queue_len;
unsigned int sync_queue_delay;
- struct task_struct *master_thread;
struct delayed_work master_wakeup_work;
struct netns_ipvs *ipvs;
};
+struct ip_vs_sync_thread_data;
+
/* How much time to keep dests in trash */
#define IP_VS_DEST_TRASH_PERIOD (120 * HZ)
@@ -938,7 +939,8 @@ struct netns_ipvs {
spinlock_t sync_lock;
struct ipvs_master_sync_state *ms;
spinlock_t sync_buff_lock;
- struct task_struct **backup_threads;
+ struct ip_vs_sync_thread_data *master_tinfo;
+ struct ip_vs_sync_thread_data *backup_tinfo;
int threads_mask;
volatile int sync_state;
struct mutex sync_mutex;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 053cd96b9c76..179e9d11e41b 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2382,9 +2382,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
cfg.syncid = dm->syncid;
ret = start_sync_thread(ipvs, &cfg, dm->state);
} else {
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs, dm->state);
- mutex_unlock(&ipvs->sync_mutex);
}
goto out_dec;
}
@@ -3490,10 +3488,8 @@ static int ip_vs_genl_del_daemon(struct netns_ipvs *ipvs, struct nlattr **attrs)
if (!attrs[IPVS_DAEMON_ATTR_STATE])
return -EINVAL;
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs,
nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
- mutex_unlock(&ipvs->sync_mutex);
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 2526be6b3d90..a4a78c4b06de 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -195,6 +195,7 @@ union ip_vs_sync_conn {
#define IPVS_OPT_F_PARAM (1 << (IPVS_OPT_PARAM-1))
struct ip_vs_sync_thread_data {
+ struct task_struct *task;
struct netns_ipvs *ipvs;
struct socket *sock;
char *buf;
@@ -374,8 +375,11 @@ static inline void sb_queue_tail(struct netns_ipvs *ipvs,
max(IPVS_SYNC_SEND_DELAY, 1));
ms->sync_queue_len++;
list_add_tail(&sb->list, &ms->sync_queue);
- if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE)
- wake_up_process(ms->master_thread);
+ if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
+ wake_up_process(ipvs->master_tinfo[id].task);
+ }
} else
ip_vs_sync_buff_release(sb);
spin_unlock(&ipvs->sync_lock);
@@ -1636,8 +1640,10 @@ static void master_wakeup_work_handler(struct work_struct *work)
spin_lock_bh(&ipvs->sync_lock);
if (ms->sync_queue_len &&
ms->sync_queue_delay < IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
ms->sync_queue_delay = IPVS_SYNC_WAKEUP_RATE;
- wake_up_process(ms->master_thread);
+ wake_up_process(ipvs->master_tinfo[id].task);
}
spin_unlock_bh(&ipvs->sync_lock);
}
@@ -1703,10 +1709,6 @@ static int sync_thread_master(void *data)
if (sb)
ip_vs_sync_buff_release(sb);
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo);
-
return 0;
}
@@ -1740,11 +1742,6 @@ static int sync_thread_backup(void *data)
}
}
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
-
return 0;
}
@@ -1752,8 +1749,8 @@ static int sync_thread_backup(void *data)
int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int state)
{
- struct ip_vs_sync_thread_data *tinfo = NULL;
- struct task_struct **array = NULL, *task;
+ struct ip_vs_sync_thread_data *ti = NULL, *tinfo;
+ struct task_struct *task;
struct net_device *dev;
char *name;
int (*threadfn)(void *data);
@@ -1822,7 +1819,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
threadfn = sync_thread_master;
} else if (state == IP_VS_STATE_BACKUP) {
result = -EEXIST;
- if (ipvs->backup_threads)
+ if (ipvs->backup_tinfo)
goto out_early;
ipvs->bcfg = *c;
@@ -1849,28 +1846,22 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
master_wakeup_work_handler);
ms->ipvs = ipvs;
}
- } else {
- array = kcalloc(count, sizeof(struct task_struct *),
- GFP_KERNEL);
- result = -ENOMEM;
- if (!array)
- goto out;
}
+ result = -ENOMEM;
+ ti = kcalloc(count, sizeof(struct ip_vs_sync_thread_data),
+ GFP_KERNEL);
+ if (!ti)
+ goto out;
for (id = 0; id < count; id++) {
- result = -ENOMEM;
- tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
- if (!tinfo)
- goto out;
+ tinfo = &ti[id];
tinfo->ipvs = ipvs;
- tinfo->sock = NULL;
if (state == IP_VS_STATE_BACKUP) {
+ result = -ENOMEM;
tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
GFP_KERNEL);
if (!tinfo->buf)
goto out;
- } else {
- tinfo->buf = NULL;
}
tinfo->id = id;
if (state == IP_VS_STATE_MASTER)
@@ -1885,17 +1876,15 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
result = PTR_ERR(task);
goto out;
}
- tinfo = NULL;
- if (state == IP_VS_STATE_MASTER)
- ipvs->ms[id].master_thread = task;
- else
- array[id] = task;
+ tinfo->task = task;
}
/* mark as active */
- if (state == IP_VS_STATE_BACKUP)
- ipvs->backup_threads = array;
+ if (state == IP_VS_STATE_MASTER)
+ ipvs->master_tinfo = ti;
+ else
+ ipvs->backup_tinfo = ti;
spin_lock_bh(&ipvs->sync_buff_lock);
ipvs->sync_state |= state;
spin_unlock_bh(&ipvs->sync_buff_lock);
@@ -1910,29 +1899,31 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
out:
/* We do not need RTNL lock anymore, release it here so that
- * sock_release below and in the kthreads can use rtnl_lock
- * to leave the mcast group.
+ * sock_release below can use rtnl_lock to leave the mcast group.
*/
rtnl_unlock();
- count = id;
- while (count-- > 0) {
- if (state == IP_VS_STATE_MASTER)
- kthread_stop(ipvs->ms[count].master_thread);
- else
- kthread_stop(array[count]);
+ id = min(id, count - 1);
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->task)
+ kthread_stop(tinfo->task);
+ }
}
if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
kfree(ipvs->ms);
ipvs->ms = NULL;
}
mutex_unlock(&ipvs->sync_mutex);
- if (tinfo) {
- if (tinfo->sock)
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
+
+ /* No more mutexes, release socks */
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
}
- kfree(array);
return result;
out_early:
@@ -1944,15 +1935,18 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int stop_sync_thread(struct netns_ipvs *ipvs, int state)
{
- struct task_struct **array;
+ struct ip_vs_sync_thread_data *ti, *tinfo;
int id;
int retc = -EINVAL;
IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
+ mutex_lock(&ipvs->sync_mutex);
if (state == IP_VS_STATE_MASTER) {
+ retc = -ESRCH;
if (!ipvs->ms)
- return -ESRCH;
+ goto err;
+ ti = ipvs->master_tinfo;
/*
* The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1971,38 +1965,56 @@ int stop_sync_thread(struct netns_ipvs *ipvs, int state)
struct ipvs_master_sync_state *ms = &ipvs->ms[id];
int ret;
+ tinfo = &ti[id];
pr_info("stopping master sync thread %d ...\n",
- task_pid_nr(ms->master_thread));
+ task_pid_nr(tinfo->task));
cancel_delayed_work_sync(&ms->master_wakeup_work);
- ret = kthread_stop(ms->master_thread);
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
kfree(ipvs->ms);
ipvs->ms = NULL;
+ ipvs->master_tinfo = NULL;
} else if (state == IP_VS_STATE_BACKUP) {
- if (!ipvs->backup_threads)
- return -ESRCH;
+ retc = -ESRCH;
+ if (!ipvs->backup_tinfo)
+ goto err;
+ ti = ipvs->backup_tinfo;
ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
- array = ipvs->backup_threads;
retc = 0;
for (id = ipvs->threads_mask; id >= 0; id--) {
int ret;
+ tinfo = &ti[id];
pr_info("stopping backup sync thread %d ...\n",
- task_pid_nr(array[id]));
- ret = kthread_stop(array[id]);
+ task_pid_nr(tinfo->task));
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
- kfree(array);
- ipvs->backup_threads = NULL;
+ ipvs->backup_tinfo = NULL;
+ } else {
+ goto err;
}
+ id = ipvs->threads_mask;
+ mutex_unlock(&ipvs->sync_mutex);
+
+ /* No more mutexes, release socks */
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
/* decrease the module use count */
ip_vs_use_count_dec();
+ return retc;
+err:
+ mutex_unlock(&ipvs->sync_mutex);
return retc;
}
@@ -2021,7 +2033,6 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
{
int retc;
- mutex_lock(&ipvs->sync_mutex);
retc = stop_sync_thread(ipvs, IP_VS_STATE_MASTER);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Master Daemon\n");
@@ -2029,5 +2040,4 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
retc = stop_sync_thread(ipvs, IP_VS_STATE_BACKUP);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Backup Daemon\n");
- mutex_unlock(&ipvs->sync_mutex);
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 164/219] ath9k: correctly handle short radar pulses
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Zefir Kurtisi, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
[ Upstream commit df5c4150501ee7e86383be88f6490d970adcf157 ]
In commit 3c0efb745a17 ("ath9k: discard undersized packets")
the lower bound of RX packets was set to 10 (min ACK size) to
filter those that would otherwise be treated as invalid at
mac80211.
Alas, short radar pulses are reported as PHY_ERROR frames
with length set to 3. Therefore their detection stopped
working after that commit.
NOTE: ath9k drivers built thereafter will not pass DFS
certification.
This extends the criteria for short packets to explicitly
handle PHY_ERROR frames.
Fixes: 3c0efb745a17 ("ath9k: discard undersized packets")
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/recv.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4e97f7f3b2a3..06e660858766 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -815,6 +815,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hdr *hdr;
bool discard_current = sc->rx.discard_next;
+ bool is_phyerr;
/*
* Discard corrupt descriptors which are marked in
@@ -827,8 +828,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
/*
* Discard zero-length packets and packets smaller than an ACK
+ * which are not PHY_ERROR (short radar pulses have a length of 3)
*/
- if (rx_stats->rs_datalen < 10) {
+ is_phyerr = rx_stats->rs_status & ATH9K_RXERR_PHY;
+ if (!rx_stats->rs_datalen ||
+ (rx_stats->rs_datalen < 10 && !is_phyerr)) {
RX_STAT_INC(sc, rx_len_err);
goto corrupt;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 176/219] ath10k: destroy sdio workqueue while remove sdio module
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Wen Gong, Kalle Valo, Sasha Levin, ath10k, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]
The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 73ef3e75d199..28bdf0212538 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2081,6 +2081,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
cancel_work_sync(&ar_sdio->wr_async_work);
ath10k_core_unregister(ar);
ath10k_core_destroy(ar);
+
+ flush_workqueue(ar_sdio->workqueue);
+ destroy_workqueue(ar_sdio->workqueue);
}
static const struct sdio_device_id ath10k_sdio_devices[] = {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 177/219] net: mvpp2: prs: Don't override the sign bit in SRAM parser shift
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maxime Chevallier, Alan Winkowski, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
[ Upstream commit 8ec3ede559956f8ad58db7b57d25ac724bab69e9 ]
The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.
This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.
This shift can be negative in some cases, such as in IPv6 parsing.
This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index ae2240074d8e..5692c6087bbb 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -312,7 +312,8 @@ static void mvpp2_prs_sram_shift_set(struct mvpp2_prs_entry *pe, int shift,
}
/* Set value */
- pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] = shift & MVPP2_PRS_SRAM_SHIFT_MASK;
+ pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] |=
+ shift & MVPP2_PRS_SRAM_SHIFT_MASK;
/* Reset and set operation */
mvpp2_prs_sram_bits_clear(pe, MVPP2_PRS_SRAM_OP_SEL_SHIFT_OFFS,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 179/219] net: hns3: add Asym Pause support to fix autoneg problem
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yonglong Liu, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Yonglong Liu <liuyonglong@huawei.com>
[ Upstream commit bc3781edcea017aa1a29abd953b776cdba298ce2 ]
Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.
We except the result is:
Local device:
Autonegotiate: on
RX: on
TX: off
RX negotiated: on
TX negotiated: off
Link partner:
Autonegotiate: on
RX: off
TX: on
RX negotiated: off
TX negotiated: on
But actually, the result of Local device and link partner is both:
Autonegotiate: on
RX: off
TX: off
RX negotiated: off
TX negotiated: off
The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
...
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.
This patch adds Asym_Pause to the supported flag to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 563eefa20003..14d37c26196b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -889,6 +889,7 @@ static void hclge_parse_copper_link_mode(struct hclge_dev *hdev,
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
}
static void hclge_parse_link_mode(struct hclge_dev *hdev, u8 speed_ability)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 48eda2c6fdae..71a6f7c734b6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -215,6 +215,13 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
linkmode_and(phydev->supported, phydev->supported, mask);
linkmode_copy(phydev->advertising, phydev->supported);
+ /* supported flag is Pause and Asym Pause, but default advertising
+ * should be rx on, tx on, so need clear Asym Pause in advertising
+ * flag
+ */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->advertising);
+
return 0;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 185/219] bnxt_en: Disable bus master during PCI shutdown and driver unload.
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Michael Chan, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Michael Chan <michael.chan@broadcom.com>
[ Upstream commit c20dc142dd7b2884b8570eeab323bcd4a84294fa ]
Some chips with older firmware can continue to perform DMA read from
context memory even after the memory has been freed. In the PCI shutdown
method, we need to call pci_disable_device() to shutdown DMA to prevent
this DMA before we put the device into D3hot. DMA memory request in
D3hot state will generate PCI fatal error. Similarly, in the driver
remove method, the context memory should only be freed after DMA has
been shutdown for correctness.
Fixes: 98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 30cafe4cdb6e..bf1fd513fa02 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10165,10 +10165,10 @@ static void bnxt_remove_one(struct pci_dev *pdev)
bnxt_dcb_free(bp);
kfree(bp->edev);
bp->edev = NULL;
+ bnxt_cleanup_pci(bp);
bnxt_free_ctx_mem(bp);
kfree(bp->ctx);
bp->ctx = NULL;
- bnxt_cleanup_pci(bp);
bnxt_free_port_stats(bp);
free_netdev(dev);
}
@@ -10730,6 +10730,7 @@ static void bnxt_shutdown(struct pci_dev *pdev)
if (system_state == SYSTEM_POWER_OFF) {
bnxt_clear_int_mode(bp);
+ pci_disable_device(pdev);
pci_wake_from_d3(pdev, bp->wol);
pci_set_power_state(pdev, PCI_D3hot);
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 192/219] vxlan: do not destroy fdb if register_netdevice() is failed
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Taehee Yoo, Roopa Prabhu, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 7c31e54aeee517d1318dfc0bde9fa7de75893dc6 ]
__vxlan_dev_create() destroys FDB using specific pointer which indicates
a fdb when error occurs.
But that pointer should not be used when register_netdevice() fails because
register_netdevice() internally destroys fdb when error occurs.
This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev
internally.
Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan
dev.
vxlan_fdb_insert() is called after calling register_netdevice().
This routine can avoid situation that ->ndo_uninit() destroys fdb entry
in error path of register_netdevice().
Hence, error path of __vxlan_dev_create() routine can have an opportunity
to destroy default fdb entry by hand.
Test command
ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \
dev enp0s9 dstport 4789
Splat looks like:
[ 213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256
[ 213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan]
[ 213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d
[ 213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202
[ 213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000
[ 213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0
[ 213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000
[ 213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200
[ 213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0
[ 213.402178] FS: 00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
[ 213.402178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0
[ 213.402178] Call Trace:
[ 213.402178] __vxlan_dev_create+0x3a9/0x7d0 [vxlan]
[ 213.402178] ? vxlan_changelink+0x740/0x740 [vxlan]
[ 213.402178] ? rcu_read_unlock+0x60/0x60 [vxlan]
[ 213.402178] ? __kasan_kmalloc.constprop.3+0xa0/0xd0
[ 213.402178] vxlan_newlink+0x8d/0xc0 [vxlan]
[ 213.402178] ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan]
[ 213.554119] ? __netlink_ns_capable+0xc3/0xf0
[ 213.554119] __rtnl_newlink+0xb75/0x1180
[ 213.554119] ? rtnl_link_unregister+0x230/0x230
[ ... ]
Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/vxlan.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 38ecb66fb3e9..82c25f07261f 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -806,6 +806,14 @@ static struct vxlan_fdb *vxlan_fdb_alloc(struct vxlan_dev *vxlan,
return f;
}
+static void vxlan_fdb_insert(struct vxlan_dev *vxlan, const u8 *mac,
+ __be32 src_vni, struct vxlan_fdb *f)
+{
+ ++vxlan->addrcnt;
+ hlist_add_head_rcu(&f->hlist,
+ vxlan_fdb_head(vxlan, mac, src_vni));
+}
+
static int vxlan_fdb_create(struct vxlan_dev *vxlan,
const u8 *mac, union vxlan_addr *ip,
__u16 state, __be16 port, __be32 src_vni,
@@ -831,18 +839,13 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan,
return rc;
}
- ++vxlan->addrcnt;
- hlist_add_head_rcu(&f->hlist,
- vxlan_fdb_head(vxlan, mac, src_vni));
-
*fdb = f;
return 0;
}
-static void vxlan_fdb_free(struct rcu_head *head)
+static void __vxlan_fdb_free(struct vxlan_fdb *f)
{
- struct vxlan_fdb *f = container_of(head, struct vxlan_fdb, rcu);
struct vxlan_rdst *rd, *nd;
list_for_each_entry_safe(rd, nd, &f->remotes, list) {
@@ -852,6 +855,13 @@ static void vxlan_fdb_free(struct rcu_head *head)
kfree(f);
}
+static void vxlan_fdb_free(struct rcu_head *head)
+{
+ struct vxlan_fdb *f = container_of(head, struct vxlan_fdb, rcu);
+
+ __vxlan_fdb_free(f);
+}
+
static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f,
bool do_notify, bool swdev_notify)
{
@@ -979,6 +989,7 @@ static int vxlan_fdb_update_create(struct vxlan_dev *vxlan,
if (rc < 0)
return rc;
+ vxlan_fdb_insert(vxlan, mac, src_vni, f);
rc = vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH,
swdev_notify, extack);
if (rc)
@@ -3573,12 +3584,17 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
if (err)
goto errout;
- /* notify default fdb entry */
if (f) {
+ vxlan_fdb_insert(vxlan, all_zeros_mac,
+ vxlan->default_dst.remote_vni, f);
+
+ /* notify default fdb entry */
err = vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f),
RTM_NEWNEIGH, true, extack);
- if (err)
- goto errout;
+ if (err) {
+ vxlan_fdb_destroy(vxlan, f, false, false);
+ goto unregister;
+ }
}
list_add(&vxlan->next, &vn->vxlan_list);
@@ -3590,7 +3606,8 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
* destroy the entry by hand here.
*/
if (f)
- vxlan_fdb_destroy(vxlan, f, false, false);
+ __vxlan_fdb_free(f);
+unregister:
if (unregister)
unregister_netdevice(dev);
return err;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 194/219] net: usb: asix: init MAC address buffers
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Phong Tran, syzbot+8a3fc6674bbc3978ed4e, David S . Miller,
Sasha Levin, linux-usb, netdev, clang-built-linux
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Phong Tran <tranmanphong@gmail.com>
[ Upstream commit 78226f6eaac80bf30256a33a4926c194ceefdf36 ]
This is for fixing bug KMSAN: uninit-value in ax88772_bind
Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ
Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com
syzbot found the following crash on:
HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree: kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler: clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000
==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
__msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
really_probe+0xdae/0x1d80 drivers/base/dd.c:513
driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
__device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
__device_attach+0x454/0x730 drivers/base/dd.c:844
device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
bus_probe_device+0x137/0x390 drivers/base/bus.c:514
device_add+0x288d/0x30e0 drivers/base/core.c:2106
usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
hub_port_connect drivers/usb/core/hub.c:5089 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
process_scheduled_works kernel/workqueue.c:2331 [inline]
worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
kthread+0x4b5/0x4f0 kernel/kthread.c:254
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/asix_devices.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 3d93993e74da..2eca4168af2f 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -238,7 +238,7 @@ static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret = 0;
- u8 buf[ETH_ALEN];
+ u8 buf[ETH_ALEN] = {0};
int i;
unsigned long gpio_bits = dev->driver_info->data;
@@ -689,7 +689,7 @@ static int asix_resume(struct usb_interface *intf)
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret, i;
- u8 buf[ETH_ALEN], chipcode = 0;
+ u8 buf[ETH_ALEN] = {0}, chipcode = 0;
u32 phyid;
struct asix_common_private *priv;
@@ -1073,7 +1073,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
- u8 buf[ETH_ALEN];
+ u8 buf[ETH_ALEN] = {0};
usbnet_get_endpoints(dev,intf);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 196/219] libbpf: fix GCC8 warning for strncpy
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Andrii Nakryiko, Magnus Karlsson, Yonghong Song, Daniel Borkmann,
Sasha Levin, netdev, bpf
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Andrii Nakryiko <andriin@fb.com>
[ Upstream commit cdfc7f888c2a355b01308e97c6df108f1c2b64e8 ]
GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/xsk.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index af5f310ecca1..1fe0e1eec738 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -336,7 +336,8 @@ static int xsk_get_max_queues(struct xsk_socket *xsk)
channels.cmd = ETHTOOL_GCHANNELS;
ifr.ifr_data = (void *)&channels;
- strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ);
+ strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1);
+ ifr.ifr_name[IFNAMSIZ - 1] = '\0';
err = ioctl(fd, SIOCETHTOOL, &ifr);
if (err && errno != EOPNOTSUPP) {
ret = -errno;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 001/158] wil6210: fix potential out-of-bounds read
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Gustavo A. R. Silva, Maya Erez, Kalle Valo, Sasha Levin,
linux-wireless, wil6210, netdev
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
[ Upstream commit bfabdd6997323adbedccb13a3fed1967fb8cf8f5 ]
Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:
enum gro_result {
GRO_MERGED,
GRO_MERGED_FREE,
GRO_HELD,
GRO_NORMAL,
GRO_DROP,
GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;
In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:
wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
len, gro_res_str[rc]);
Fix this by adding element "GRO_CONSUMED" to array gro_res_str.
Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b5055 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/txrx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 75c8aa297107..1b1b58e0129a 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -736,6 +736,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
[GRO_HELD] = "GRO_HELD",
[GRO_NORMAL] = "GRO_NORMAL",
[GRO_DROP] = "GRO_DROP",
+ [GRO_CONSUMED] = "GRO_CONSUMED",
};
wil->txrx_ops.get_netif_rx_params(skb, &cid, &security);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 003/158] ath9k: Check for errors when reading SREV register
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Tim Schumacher, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Tim Schumacher <timschumi@gmx.de>
[ Upstream commit 2f90c7e5d09437a4d8d5546feaae9f1cf48cfbe1 ]
Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Failed to read SREV register
ath: phy2: Could not read hardware revision
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++--------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index bb319f22761f..b4f7ee423d40 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -252,8 +252,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
/* Chip Revisions */
/******************/
-static void ath9k_hw_read_revisions(struct ath_hw *ah)
+static bool ath9k_hw_read_revisions(struct ath_hw *ah)
{
+ u32 srev;
u32 val;
if (ah->get_mac_revision)
@@ -269,25 +270,33 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
val = REG_READ(ah, AR_SREV);
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
}
- return;
+ return true;
case AR9300_DEVID_AR9340:
ah->hw_version.macVersion = AR_SREV_VERSION_9340;
- return;
+ return true;
case AR9300_DEVID_QCA955X:
ah->hw_version.macVersion = AR_SREV_VERSION_9550;
- return;
+ return true;
case AR9300_DEVID_AR953X:
ah->hw_version.macVersion = AR_SREV_VERSION_9531;
- return;
+ return true;
case AR9300_DEVID_QCA956X:
ah->hw_version.macVersion = AR_SREV_VERSION_9561;
- return;
+ return true;
}
- val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+ srev = REG_READ(ah, AR_SREV);
+
+ if (srev == -EIO) {
+ ath_err(ath9k_hw_common(ah),
+ "Failed to read SREV register");
+ return false;
+ }
+
+ val = srev & AR_SREV_ID;
if (val == 0xFF) {
- val = REG_READ(ah, AR_SREV);
+ val = srev;
ah->hw_version.macVersion =
(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
@@ -306,6 +315,8 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE)
ah->is_pciexpress = true;
}
+
+ return true;
}
/************************************/
@@ -559,7 +570,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
int r = 0;
- ath9k_hw_read_revisions(ah);
+ if (!ath9k_hw_read_revisions(ah)) {
+ ath_err(common, "Could not read hardware revisions");
+ return -EOPNOTSUPP;
+ }
switch (ah->hw_version.macVersion) {
case AR_SREV_VERSION_5416_PCI:
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 004/158] ath6kl: add some bounds checking
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dan Carpenter, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab ]
The "ev->traffic_class" and "reply->ac" variables come from the network
and they're used as an offset into the wmi->stream_exist_for_ac[] array.
Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[]
array only has WMM_NUM_AC (4) elements. We need to add a couple bounds
checks to prevent array overflows.
I also modified one existing check from "if (traffic_class > 3) {" to
"if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent.
Fixes: bdcd81707973 (" Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath6kl/wmi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 777acc564ac9..bc7916f2add0 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1178,6 +1178,10 @@ static int ath6kl_wmi_pstream_timeout_event_rx(struct wmi *wmi, u8 *datap,
return -EINVAL;
ev = (struct wmi_pstream_timeout_event *) datap;
+ if (ev->traffic_class >= WMM_NUM_AC) {
+ ath6kl_err("invalid traffic class: %d\n", ev->traffic_class);
+ return -EINVAL;
+ }
/*
* When the pstream (fat pipe == AC) timesout, it means there were
@@ -1519,6 +1523,10 @@ static int ath6kl_wmi_cac_event_rx(struct wmi *wmi, u8 *datap, int len,
return -EINVAL;
reply = (struct wmi_cac_event *) datap;
+ if (reply->ac >= WMM_NUM_AC) {
+ ath6kl_err("invalid AC: %d\n", reply->ac);
+ return -EINVAL;
+ }
if ((reply->cac_indication == CAC_INDICATION_ADMISSION_RESP) &&
(reply->status_code != IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED)) {
@@ -2635,7 +2643,7 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
u16 active_tsids = 0;
int ret;
- if (traffic_class > 3) {
+ if (traffic_class >= WMM_NUM_AC) {
ath6kl_err("invalid traffic class: %d\n", traffic_class);
return -EINVAL;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 010/158] batman-adv: fix for leaked TVLV handler.
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jeremy Sowden, syzbot+d454a826e670502484b8, Simon Wunderlich,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jeremy Sowden <jeremy@azazel.net>
[ Upstream commit 17f78dd1bd624a4dd78ed5db3284a63ee807fcc3 ]
A handler for BATADV_TVLV_ROAM was being registered when the
translation-table was initialized, but not unregistered when the
translation-table was freed. Unregister it.
Fixes: 122edaa05940 ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")
Reported-by: syzbot+d454a826e670502484b8@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/batman-adv/translation-table.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 359ec1a6e822..9fa5389ea244 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -3821,6 +3821,8 @@ static void batadv_tt_purge(struct work_struct *work)
*/
void batadv_tt_free(struct batadv_priv *bat_priv)
{
+ batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_ROAM, 1);
+
batadv_tvlv_container_unregister(bat_priv, BATADV_TVLV_TT, 1);
batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_TT, 1);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 019/158] net: stmmac: dwmac4/5: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 0620ec6c62a5a07625b65f699adc5d1b90394ee6 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 7e5d5db0d516..a2f3db39221e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -444,14 +444,20 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
* are required
*/
value |= GMAC_PACKET_FILTER_PR;
- } else if (!netdev_uc_empty(dev)) {
- int reg = 1;
+ } else {
struct netdev_hw_addr *ha;
+ int reg = 1;
netdev_for_each_uc_addr(ha, dev) {
dwmac4_set_umac_addr(hw, ha->addr, reg);
reg++;
}
+
+ while (reg <= GMAC_MAX_PERFECT_ADDRESSES) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
writel(value, ioaddr + GMAC_PACKET_FILTER);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 018/158] net: stmmac: dwmac1000: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 9463c445590091202659cdfdd44b236acadfbd84 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 0877bde6e860..21d131347e2e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -216,6 +216,12 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
GMAC_ADDR_LOW(reg));
reg++;
}
+
+ while (reg <= perfect_addr_number) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
#ifdef FRAME_FILTER_DEBUG
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 023/158] af_key: fix leaks in key_pol_get_resp and dump_sp.
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jeremy Sowden, syzbot+4f0529365f7f2208d9f0, Steffen Klassert,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Jeremy Sowden <jeremy@azazel.net>
[ Upstream commit 7c80eb1c7e2b8420477fbc998971d62a648035d9 ]
In both functions, if pfkey_xfrm_policy2msg failed we leaked the newly
allocated sk_buff. Free it on error.
Fixes: 55569ce256ce ("Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.")
Reported-by: syzbot+4f0529365f7f2208d9f0@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/key/af_key.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 0b79c9aa8eb1..1982f9f31deb 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2442,8 +2442,10 @@ static int key_pol_get_resp(struct sock *sk, struct xfrm_policy *xp, const struc
goto out;
}
err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(out_skb);
goto out;
+ }
out_hdr = (struct sadb_msg *) out_skb->data;
out_hdr->sadb_msg_version = hdr->sadb_msg_version;
@@ -2694,8 +2696,10 @@ static int dump_sp(struct xfrm_policy *xp, int dir, int count, void *ptr)
return PTR_ERR(out_skb);
err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(out_skb);
return err;
+ }
out_hdr = (struct sadb_msg *) out_skb->data;
out_hdr->sadb_msg_version = pfk->dump.msg_version;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 024/158] xfrm: Fix xfrm sel prefix length validation
From: Sasha Levin @ 2019-07-15 14:15 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Anirudh Gupta, Anirudh Gupta, Herbert Xu, Steffen Klassert,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Anirudh Gupta <anirudhrudr@gmail.com>
[ Upstream commit b38ff4075a80b4da5cb2202d7965332ca0efb213 ]
Family of src/dst can be different from family of selector src/dst.
Use xfrm selector family to validate address prefix length,
while verifying new sa from userspace.
Validated patch with this command:
ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \
reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \
0x1111016400000000000000000000000044440001 128 \
sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5
Fixes: 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.")
Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xfrm/xfrm_user.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 2122f89f6155..d80d54e663c0 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -150,6 +150,22 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
err = -EINVAL;
switch (p->family) {
+ case AF_INET:
+ break;
+
+ case AF_INET6:
+#if IS_ENABLED(CONFIG_IPV6)
+ break;
+#else
+ err = -EAFNOSUPPORT;
+ goto out;
+#endif
+
+ default:
+ goto out;
+ }
+
+ switch (p->sel.family) {
case AF_INET:
if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
goto out;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 032/158] net: phy: Check against net_device being NULL
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ioana Ciornei, Andrew Lunn, Florian Fainelli, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Ioana Ciornei <ioana.ciornei@nxp.com>
[ Upstream commit 82c76aca81187b3d28a6fb3062f6916450ce955e ]
In general, we don't want MAC drivers calling phy_attach_direct with the
net_device being NULL. Add checks against this in all the functions
calling it: phy_attach() and phy_connect_direct().
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/phy_device.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8a96d985a52f..6144146aec29 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -757,6 +757,9 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
{
int rc;
+ if (!dev)
+ return -EINVAL;
+
rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
if (rc)
return rc;
@@ -1098,6 +1101,9 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
struct device *d;
int rc;
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name
*/
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 043/158] net: stmmac: dwmac4: fix flow control issue
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Biao Huang, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Biao Huang <biao.huang@mediatek.com>
[ Upstream commit ee326fd01e79dfa42014d55931260b68b9fa3273 ]
Current dwmac4_flow_ctrl will not clear
GMAC_RX_FLOW_CTRL_RFE/GMAC_RX_FLOW_CTRL_RFE bits,
so MAC hw will keep flow control on although expecting
flow control off by ethtool. Add codes to fix it.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index a2f3db39221e..d0e6e1503581 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -475,8 +475,9 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
if (fc & FLOW_RX) {
pr_debug("\tReceive Flow-Control ON\n");
flow |= GMAC_RX_FLOW_CTRL_RFE;
- writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
}
+ writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
+
if (fc & FLOW_TX) {
pr_debug("\tTransmit Flow-Control ON\n");
@@ -484,7 +485,7 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
pr_debug("\tduplex mode: PAUSE %d\n", pause_time);
for (queue = 0; queue < tx_cnt; queue++) {
- flow |= GMAC_TX_FLOW_CTRL_TFE;
+ flow = GMAC_TX_FLOW_CTRL_TFE;
if (duplex)
flow |=
@@ -492,6 +493,9 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
}
+ } else {
+ for (queue = 0; queue < tx_cnt; queue++)
+ writel(0, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
}
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 046/158] net: fec: Do not use netdev messages too early
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Fabio Estevam, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Fabio Estevam <festevam@gmail.com>
[ Upstream commit a19a0582363b9a5f8ba812f34f1b8df394898780 ]
When a valid MAC address is not found the current messages
are shown:
fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa
Since the network device has not been registered at this point, it is better
to use dev_err()/dev_info() instead, which will provide cleaner log
messages like these:
fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa
Tested on a imx6dl-pico-pi board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/fec_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index bf715a367273..4cf80de4c471 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1689,10 +1689,10 @@ static void fec_get_mac(struct net_device *ndev)
*/
if (!is_valid_ether_addr(iap)) {
/* Report it and use a random ethernet address instead */
- netdev_err(ndev, "Invalid MAC address: %pM\n", iap);
+ dev_err(&fep->pdev->dev, "Invalid MAC address: %pM\n", iap);
eth_hw_addr_random(ndev);
- netdev_info(ndev, "Using random MAC address: %pM\n",
- ndev->dev_addr);
+ dev_info(&fep->pdev->dev, "Using random MAC address: %pM\n",
+ ndev->dev_addr);
return;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 047/158] net: axienet: Fix race condition causing TX hang
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Robert Hancock, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Robert Hancock <hancock@sedsystems.ca>
[ Upstream commit 7de44285c1f69ccfbe8be1d6a16fcd956681fee6 ]
It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in axienet_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.
To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 7cfd7ff38e86..66b30ebd45ee 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -614,6 +614,10 @@ static void axienet_start_xmit_done(struct net_device *ndev)
ndev->stats.tx_packets += packets;
ndev->stats.tx_bytes += size;
+
+ /* Matches barrier in axienet_start_xmit */
+ smp_mb();
+
netif_wake_queue(ndev);
}
@@ -668,9 +672,19 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
if (axienet_check_tx_bd_space(lp, num_frag)) {
- if (!netif_queue_stopped(ndev))
- netif_stop_queue(ndev);
- return NETDEV_TX_BUSY;
+ if (netif_queue_stopped(ndev))
+ return NETDEV_TX_BUSY;
+
+ netif_stop_queue(ndev);
+
+ /* Matches barrier in axienet_start_xmit_done */
+ smp_mb();
+
+ /* Space might have just been freed - check again */
+ if (axienet_check_tx_bd_space(lp, num_frag))
+ return NETDEV_TX_BUSY;
+
+ netif_wake_queue(ndev);
}
if (skb->ip_summed == CHECKSUM_PARTIAL) {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 050/158] net: sfp: add mutex to prevent concurrent state checks
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Robert Hancock, Russell King, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Robert Hancock <hancock@sedsystems.ca>
[ Upstream commit 2158e856f56bb762ef90f3ec244d41a519826f75 ]
sfp_check_state can potentially be called by both a threaded IRQ handler
and delayed work. If it is concurrently called, it could result in
incorrect state management. Add a st_mutex to protect the state - this
lock gets taken outside of code that checks and handle state changes, and
the existing sm_mutex nests inside of it.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/sfp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 8807a806cc47..418522aa2f71 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -185,10 +185,11 @@ struct sfp {
struct gpio_desc *gpio[GPIO_MAX];
bool attached;
+ struct mutex st_mutex; /* Protects state */
unsigned int state;
struct delayed_work poll;
struct delayed_work timeout;
- struct mutex sm_mutex;
+ struct mutex sm_mutex; /* Protects state machine */
unsigned char sm_mod_state;
unsigned char sm_dev_state;
unsigned short sm_state;
@@ -1718,6 +1719,7 @@ static void sfp_check_state(struct sfp *sfp)
{
unsigned int state, i, changed;
+ mutex_lock(&sfp->st_mutex);
state = sfp_get_state(sfp);
changed = state ^ sfp->state;
changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
@@ -1743,6 +1745,7 @@ static void sfp_check_state(struct sfp *sfp)
sfp_sm_event(sfp, state & SFP_F_LOS ?
SFP_E_LOS_HIGH : SFP_E_LOS_LOW);
rtnl_unlock();
+ mutex_unlock(&sfp->st_mutex);
}
static irqreturn_t sfp_irq(int irq, void *data)
@@ -1773,6 +1776,7 @@ static struct sfp *sfp_alloc(struct device *dev)
sfp->dev = dev;
mutex_init(&sfp->sm_mutex);
+ mutex_init(&sfp->st_mutex);
INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 062/158] bpf: silence warning messages in core
From: Sasha Levin @ 2019-07-15 14:16 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Valdis Klētnieks, Andrii Nakryiko, Daniel Borkmann,
Sasha Levin, netdev, bpf
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Valdis Klētnieks <valdis.kletnieks@vt.edu>
[ Upstream commit aee450cbe482a8c2f6fa5b05b178ef8b8ff107ca ]
Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:
kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
| ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
1087 | INSN_3(ALU, ADD, X), \
| ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
| ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
| ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
1087 | INSN_3(ALU, ADD, X), \
| ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
| ^~~~~~~~~~~~
98 copies of the above.
The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/bpf/Makefile b/kernel/bpf/Makefile
index 0488b8258321..ffc39a7e028d 100644
--- a/kernel/bpf/Makefile
+++ b/kernel/bpf/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := core.o
+CFLAGS_core.o += $(call cc-disable-warning, override-init)
obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o inode.o helpers.o tnum.o
obj-$(CONFIG_BPF_SYSCALL) += hashtab.o arraymap.o percpu_freelist.o bpf_lru_list.o lpm_trie.o map_in_map.o
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 103/158] rtlwifi: rtl8192cu: fix error handle when usb probe failed
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ping-Ke Shih, syzbot+1fcc5ef45175fc774231, Larry Finger,
Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Ping-Ke Shih <pkshih@realtek.com>
[ Upstream commit 6c0ed66f1a5b84e2a812c7c2d6571a5621bf3396 ]
rtl_usb_probe() must do error handle rtl_deinit_core() only if
rtl_init_core() is done, otherwise goto error_out2.
| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
| rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl8192cu: Chip version 0x10
| rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl_usb: Too few input end points found
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
| Google 01/01/2011
| Workqueue: usb_hub_wq hub_event
| Call Trace:
| __dump_stack lib/dump_stack.c:77 [inline]
| dump_stack+0xe8/0x16e lib/dump_stack.c:113
| assign_lock_key kernel/locking/lockdep.c:786 [inline]
| register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
| __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
| lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
| __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
| _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
| rtl_c2hcmd_launcher+0xd1/0x390
| drivers/net/wireless/realtek/rtlwifi/base.c:2344
| rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574
| rtl_usb_probe.cold+0x861/0xa70
| drivers/net/wireless/realtek/rtlwifi/usb.c:1093
| usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
| really_probe+0x2da/0xb10 drivers/base/dd.c:509
| driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
| __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
| bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
| __device_attach+0x223/0x3a0 drivers/base/dd.c:844
| bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
| device_add+0xad2/0x16e0 drivers/base/core.c:2106
| usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
| generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
| usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
| really_probe+0x2da/0xb10 drivers/base/dd.c:509
| driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
| __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
| bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
| __device_attach+0x223/0x3a0 drivers/base/dd.c:844
| bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
| device_add+0xad2/0x16e0 drivers/base/core.c:2106
| usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
| hub_port_connect drivers/usb/core/hub.c:5089 [inline]
| hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
| port_event drivers/usb/core/hub.c:5350 [inline]
| hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
| process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
| worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
| kthread+0x313/0x420 kernel/kthread.c:253
| ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtlwifi/usb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 2ac5004d7a40..5adb939afee8 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1081,13 +1081,13 @@ int rtl_usb_probe(struct usb_interface *intf,
rtlpriv->cfg->ops->read_eeprom_info(hw);
err = _rtl_usb_init(hw);
if (err)
- goto error_out;
+ goto error_out2;
rtl_usb_init_sw(hw);
/* Init mac80211 sw */
err = rtl_init_core(hw);
if (err) {
pr_err("Can't allocate sw for mac80211\n");
- goto error_out;
+ goto error_out2;
}
if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
pr_err("Can't init_sw_vars\n");
@@ -1108,6 +1108,7 @@ int rtl_usb_probe(struct usb_interface *intf,
error_out:
rtl_deinit_core(hw);
+error_out2:
_rtl_usb_io_handler_release(hw);
usb_put_dev(udev);
complete(&rtlpriv->firmware_loading_complete);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 4.19 133/158] igb: clear out skb->tstamp after reading the txtime
From: Sasha Levin @ 2019-07-15 14:17 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Vedang Patel, Aaron Brown, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715141809.8445-1-sashal@kernel.org>
From: Vedang Patel <vedang.patel@intel.com>
[ Upstream commit 1e08511d5d01884a3c9070afd52a47799312074a ]
If a packet which is utilizing the launchtime feature (via SO_TXTIME socket
option) also requests the hardware transmit timestamp, the hardware
timestamp is not delivered to the userspace. This is because the value in
skb->tstamp is mistaken as the software timestamp.
Applications, like ptp4l, request a hardware timestamp by setting the
SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is
detected by the driver (this work is done in igb_ptp_tx_work() which calls
igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the
ERR_QUEUE for the userspace to read. When the userspace is ready, it will
issue a recvmsg() call to collect this timestamp. The problem is in this
recvmsg() call. If the skb->tstamp is not cleared out, it will be
interpreted as a software timestamp and the hardware tx timestamp will not
be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the
callee function __sock_recv_timestamp() in net/socket.c for more details.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 5aa083d9a6c9..ab76a5f77cd0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5703,6 +5703,7 @@ static void igb_tx_ctxtdesc(struct igb_ring *tx_ring,
*/
if (tx_ring->launchtime_enable) {
ts = ns_to_timespec64(first->skb->tstamp);
+ first->skb->tstamp = 0;
context_desc->seqnum_seed = cpu_to_le32(ts.tv_nsec / 32);
} else {
context_desc->seqnum_seed = 0;
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox