* [PATCH 27/34] mm/memory.c: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Aneesh Kumar K . V, Huang Ying,
Matthew Wilcox, Michal Hocko, Peter Zijlstra, Rik van Riel,
Souptick Joarder, Will Deacon
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
mm/memory.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/memory.c b/mm/memory.c
index e2bb51b6242e..8870968496ea 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -4337,7 +4337,7 @@ int __access_remote_vm(struct task_struct *tsk, struct mm_struct *mm,
buf, maddr + offset, bytes);
}
kunmap(page);
- put_page(page);
+ put_user_page(page);
}
len -= bytes;
buf += bytes;
--
2.22.0
^ permalink raw reply related
* [PATCH 28/34] mm/madvise.c: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Daniel Black, Matthew Wilcox,
Mike Kravetz
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Black <daniel@linux.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
mm/madvise.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/madvise.c b/mm/madvise.c
index 968df3aa069f..1c6881a761a5 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -672,7 +672,7 @@ static int madvise_inject_error(int behavior,
* routine is responsible for pinning the page to prevent it
* from being released back to the page allocator.
*/
- put_page(page);
+ put_user_page(page);
ret = memory_failure(pfn, 0);
if (ret)
return ret;
--
2.22.0
^ permalink raw reply related
* [PATCH 22/34] orangefs: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Mike Marshall, Martin Brandenburg
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
fs/orangefs/orangefs-bufmap.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/fs/orangefs/orangefs-bufmap.c b/fs/orangefs/orangefs-bufmap.c
index 2bb916d68576..f2f33a16d604 100644
--- a/fs/orangefs/orangefs-bufmap.c
+++ b/fs/orangefs/orangefs-bufmap.c
@@ -168,10 +168,7 @@ static DEFINE_SPINLOCK(orangefs_bufmap_lock);
static void
orangefs_bufmap_unmap(struct orangefs_bufmap *bufmap)
{
- int i;
-
- for (i = 0; i < bufmap->page_count; i++)
- put_page(bufmap->page_array[i]);
+ put_user_pages(bufmap->page_array, bufmap->page_count);
}
static void
@@ -280,7 +277,7 @@ orangefs_bufmap_map(struct orangefs_bufmap *bufmap,
for (i = 0; i < ret; i++) {
SetPageError(bufmap->page_array[i]);
- put_page(bufmap->page_array[i]);
+ put_user_page(bufmap->page_array[i]);
}
return -ENOMEM;
}
--
2.22.0
^ permalink raw reply related
* [PATCH 23/34] uprobes: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Alexander Shishkin, Jiri Olsa,
Namhyung Kim
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
kernel/events/uprobes.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 84fa00497c49..4a575de8cec8 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -397,7 +397,7 @@ __update_ref_ctr(struct mm_struct *mm, unsigned long vaddr, short d)
ret = 0;
out:
kunmap_atomic(kaddr);
- put_page(page);
+ put_user_page(page);
return ret;
}
@@ -504,7 +504,7 @@ int uprobe_write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
ret = __replace_page(vma, vaddr, old_page, new_page);
put_page(new_page);
put_old:
- put_page(old_page);
+ put_user_page(old_page);
if (unlikely(ret == -EAGAIN))
goto retry;
@@ -1981,7 +1981,7 @@ static int is_trap_at_addr(struct mm_struct *mm, unsigned long vaddr)
return result;
copy_from_page(page, vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
- put_page(page);
+ put_user_page(page);
out:
/* This needs to return true for any variant of the trap insn */
return is_trap_insn(&opcode);
--
2.22.0
^ permalink raw reply related
* [PATCH 29/34] mm/process_vm_access.c: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Al Viro, Andrea Arcangeli,
Christopher Yeoh, Heiko Carstens, Ingo Molnar, Jann Horn,
Lorenzo Stoakes, Mathieu Desnoyers, Mike Rapoport, Rashika Kheria
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christopher Yeoh <cyeoh@au1.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jann@thejh.net>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
mm/process_vm_access.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/mm/process_vm_access.c b/mm/process_vm_access.c
index 357aa7bef6c0..4d29d54ec93f 100644
--- a/mm/process_vm_access.c
+++ b/mm/process_vm_access.c
@@ -96,7 +96,7 @@ static int process_vm_rw_single_vec(unsigned long addr,
flags |= FOLL_WRITE;
while (!rc && nr_pages && iov_iter_count(iter)) {
- int pages = min(nr_pages, max_pages_per_loop);
+ int pinned_pages = min(nr_pages, max_pages_per_loop);
int locked = 1;
size_t bytes;
@@ -106,14 +106,15 @@ static int process_vm_rw_single_vec(unsigned long addr,
* current/current->mm
*/
down_read(&mm->mmap_sem);
- pages = get_user_pages_remote(task, mm, pa, pages, flags,
- process_pages, NULL, &locked);
+ pinned_pages = get_user_pages_remote(task, mm, pa, pinned_pages,
+ flags, process_pages, NULL,
+ &locked);
if (locked)
up_read(&mm->mmap_sem);
- if (pages <= 0)
+ if (pinned_pages <= 0)
return -EFAULT;
- bytes = pages * PAGE_SIZE - start_offset;
+ bytes = pinned_pages * PAGE_SIZE - start_offset;
if (bytes > len)
bytes = len;
@@ -122,10 +123,9 @@ static int process_vm_rw_single_vec(unsigned long addr,
vm_write);
len -= bytes;
start_offset = 0;
- nr_pages -= pages;
- pa += pages * PAGE_SIZE;
- while (pages)
- put_page(process_pages[--pages]);
+ nr_pages -= pinned_pages;
+ pa += pinned_pages * PAGE_SIZE;
+ put_user_pages(process_pages, pinned_pages);
}
return rc;
--
2.22.0
^ permalink raw reply related
* [PATCH 31/34] nfs: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Trond Myklebust, Anna Schumaker
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
fs/nfs/direct.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 0cb442406168..b00b89dda3c5 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -278,9 +278,7 @@ ssize_t nfs_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
static void nfs_direct_release_pages(struct page **pages, unsigned int npages)
{
- unsigned int i;
- for (i = 0; i < npages; i++)
- put_page(pages[i]);
+ put_user_pages(pages, npages);
}
void nfs_init_cinfo_from_dreq(struct nfs_commit_info *cinfo,
--
2.22.0
^ permalink raw reply related
* [PATCH 25/34] mm/frame_vector.c: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Mel Gorman, Vlastimil Babka
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
mm/frame_vector.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/mm/frame_vector.c b/mm/frame_vector.c
index c64dca6e27c2..f590badac776 100644
--- a/mm/frame_vector.c
+++ b/mm/frame_vector.c
@@ -120,7 +120,6 @@ EXPORT_SYMBOL(get_vaddr_frames);
*/
void put_vaddr_frames(struct frame_vector *vec)
{
- int i;
struct page **pages;
if (!vec->got_ref)
@@ -133,8 +132,7 @@ void put_vaddr_frames(struct frame_vector *vec)
*/
if (WARN_ON(IS_ERR(pages)))
goto out;
- for (i = 0; i < vec->nr_frames; i++)
- put_page(pages[i]);
+ put_user_pages(pages, vec->nr_frames);
vec->got_ref = false;
out:
vec->nr_frames = 0;
--
2.22.0
^ permalink raw reply related
* [PATCH 32/34] goldfish_pipe: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Greg Kroah-Hartman, Roman Kiryanov
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Note that this effectively changes the code's behavior in
qp_release_pages(): it now ultimately calls set_page_dirty_lock(),
instead of set_page_dirty(). This is probably more accurate.
As Christophe Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
[1] https://lore.kernel.org/r/20190723153640.GB720@lst.de
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Roman Kiryanov <rkir@google.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/platform/goldfish/goldfish_pipe.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index cef0133aa47a..2bd21020e288 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -288,15 +288,12 @@ static int pin_user_pages(unsigned long first_page,
static void release_user_pages(struct page **pages, int pages_count,
int is_write, s32 consumed_size)
{
- int i;
+ bool dirty = !is_write && consumed_size > 0;
- for (i = 0; i < pages_count; i++) {
- if (!is_write && consumed_size > 0)
- set_page_dirty(pages[i]);
- put_page(pages[i]);
- }
+ put_user_pages_dirty_lock(pages, pages_count, dirty);
}
+
/* Populate the call parameters, merging adjacent pages together */
static void populate_rw_params(struct page **pages,
int pages_count,
--
2.22.0
^ permalink raw reply related
* [PATCH 30/34] crypt: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Herbert Xu, David S . Miller
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
crypto/af_alg.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/crypto/af_alg.c b/crypto/af_alg.c
index 879cf23f7489..edd358ea64da 100644
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -428,10 +428,7 @@ static void af_alg_link_sg(struct af_alg_sgl *sgl_prev,
void af_alg_free_sg(struct af_alg_sgl *sgl)
{
- int i;
-
- for (i = 0; i < sgl->npages; i++)
- put_page(sgl->pages[i]);
+ put_user_pages(sgl->pages, sgl->npages);
}
EXPORT_SYMBOL_GPL(af_alg_free_sg);
@@ -668,7 +665,7 @@ static void af_alg_free_areq_sgls(struct af_alg_async_req *areq)
for_each_sg(tsgl, sg, areq->tsgl_entries, i) {
if (!sg_page(sg))
continue;
- put_page(sg_page(sg));
+ put_user_page(sg_page(sg));
}
sock_kfree_s(sk, tsgl, areq->tsgl_entries * sizeof(*tsgl));
--
2.22.0
^ permalink raw reply related
* [PATCH 34/34] fs/binfmt_elf: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: Ira Weiny <ira.weiny@intel.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
get_dump_page calls get_user_page so put_user_page must be used
to match.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
fs/binfmt_elf.c | 2 +-
fs/binfmt_elf_fdpic.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index d4e11b2e04f6..92e4a5ca99d8 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -2377,7 +2377,7 @@ static int elf_core_dump(struct coredump_params *cprm)
void *kaddr = kmap(page);
stop = !dump_emit(cprm, kaddr, PAGE_SIZE);
kunmap(page);
- put_page(page);
+ put_user_page(page);
} else
stop = !dump_skip(cprm, PAGE_SIZE);
if (stop)
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index d86ebd0dcc3d..321724b3be22 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1511,7 +1511,7 @@ static bool elf_fdpic_dump_segments(struct coredump_params *cprm)
void *kaddr = kmap(page);
res = dump_emit(cprm, kaddr, PAGE_SIZE);
kunmap(page);
- put_page(page);
+ put_user_page(page);
} else {
res = dump_skip(cprm, PAGE_SIZE);
}
--
2.22.0
^ permalink raw reply related
* [PATCH 33/34] kernel/events/core.c: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Peter Zijlstra, Ingo Molnar,
Arnaldo Carvalho de Melo, Alexander Shishkin, Jiri Olsa,
Namhyung Kim
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
kernel/events/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 0463c1151bae..7be52bbbfe87 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6426,7 +6426,7 @@ static u64 perf_virt_to_phys(u64 virt)
phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
if (p)
- put_page(p);
+ put_user_page(p);
}
return phys_addr;
--
2.22.0
^ permalink raw reply related
* [PATCH 05/34] drm/etnaviv: convert release_pages() to put_user_pages()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Joerg Roedel, Paolo Bonzini,
Radim Krčmář, Thomas Gleixner, Ingo Molnar,
Borislav Petkov, H. Peter Anvin
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/gpu/drm/etnaviv/etnaviv_gem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c
index e8778ebb72e6..a0144a5ee325 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c
@@ -686,7 +686,7 @@ static int etnaviv_gem_userptr_get_pages(struct etnaviv_gem_object *etnaviv_obj)
ret = get_user_pages_fast(ptr, num_pages,
!userptr->ro ? FOLL_WRITE : 0, pages);
if (ret < 0) {
- release_pages(pvec, pinned);
+ put_user_pages(pvec, pinned);
kvfree(pvec);
return ret;
}
@@ -710,7 +710,7 @@ static void etnaviv_gem_userptr_release(struct etnaviv_gem_object *etnaviv_obj)
if (etnaviv_obj->pages) {
int npages = etnaviv_obj->base.size >> PAGE_SHIFT;
- release_pages(etnaviv_obj->pages, npages);
+ put_user_pages(etnaviv_obj->pages, npages);
kvfree(etnaviv_obj->pages);
}
}
--
2.22.0
^ permalink raw reply related
* [PATCH 03/34] net/ceph: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:19 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Ilya Dryomov, Sage Weil,
David S . Miller
In-Reply-To: <20190802022005.5117-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Sage Weil <sage@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
net/ceph/pagevec.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/net/ceph/pagevec.c b/net/ceph/pagevec.c
index 64305e7056a1..c88fff2ab9bd 100644
--- a/net/ceph/pagevec.c
+++ b/net/ceph/pagevec.c
@@ -12,13 +12,7 @@
void ceph_put_page_vector(struct page **pages, int num_pages, bool dirty)
{
- int i;
-
- for (i = 0; i < num_pages; i++) {
- if (dirty)
- set_page_dirty_lock(pages[i]);
- put_page(pages[i]);
- }
+ put_user_pages_dirty_lock(pages, num_pages, dirty);
kvfree(pages);
}
EXPORT_SYMBOL(ceph_put_page_vector);
--
2.22.0
^ permalink raw reply related
* [PATCH 02/34] net/rds: convert put_page() to put_user_page*()
From: john.hubbard @ 2019-08-02 2:16 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Santosh Shilimkar, David S . Miller
In-Reply-To: <20190802021653.4882-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: rds-devel@oss.oracle.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
net/rds/info.c | 5 ++---
net/rds/message.c | 2 +-
net/rds/rdma.c | 15 +++++++--------
3 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/net/rds/info.c b/net/rds/info.c
index 03f6fd56d237..ca6af2889adf 100644
--- a/net/rds/info.c
+++ b/net/rds/info.c
@@ -162,7 +162,6 @@ int rds_info_getsockopt(struct socket *sock, int optname, char __user *optval,
struct rds_info_lengths lens;
unsigned long nr_pages = 0;
unsigned long start;
- unsigned long i;
rds_info_func func;
struct page **pages = NULL;
int ret;
@@ -235,8 +234,8 @@ int rds_info_getsockopt(struct socket *sock, int optname, char __user *optval,
ret = -EFAULT;
out:
- for (i = 0; pages && i < nr_pages; i++)
- put_page(pages[i]);
+ if (pages)
+ put_user_pages(pages, nr_pages);
kfree(pages);
return ret;
diff --git a/net/rds/message.c b/net/rds/message.c
index 50f13f1d4ae0..d7b0d266c437 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -404,7 +404,7 @@ static int rds_message_zcopy_from_user(struct rds_message *rm, struct iov_iter *
int i;
for (i = 0; i < rm->data.op_nents; i++)
- put_page(sg_page(&rm->data.op_sg[i]));
+ put_user_page(sg_page(&rm->data.op_sg[i]));
mmp = &rm->data.op_mmp_znotifier->z_mmp;
mm_unaccount_pinned_pages(mmp);
ret = -EFAULT;
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index 916f5ec373d8..6762e8696b99 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -162,8 +162,7 @@ static int rds_pin_pages(unsigned long user_addr, unsigned int nr_pages,
pages);
if (ret >= 0 && ret < nr_pages) {
- while (ret--)
- put_page(pages[ret]);
+ put_user_pages(pages, ret);
ret = -EFAULT;
}
@@ -276,7 +275,7 @@ static int __rds_rdma_map(struct rds_sock *rs, struct rds_get_mr_args *args,
if (IS_ERR(trans_private)) {
for (i = 0 ; i < nents; i++)
- put_page(sg_page(&sg[i]));
+ put_user_page(sg_page(&sg[i]));
kfree(sg);
ret = PTR_ERR(trans_private);
goto out;
@@ -464,9 +463,10 @@ void rds_rdma_free_op(struct rm_rdma_op *ro)
* to local memory */
if (!ro->op_write) {
WARN_ON(!page->mapping && irqs_disabled());
- set_page_dirty(page);
+ put_user_pages_dirty_lock(&page, 1, true);
+ } else {
+ put_user_page(page);
}
- put_page(page);
}
kfree(ro->op_notifier);
@@ -481,8 +481,7 @@ void rds_atomic_free_op(struct rm_atomic_op *ao)
/* Mark page dirty if it was possibly modified, which
* is the case for a RDMA_READ which copies from remote
* to local memory */
- set_page_dirty(page);
- put_page(page);
+ put_user_pages_dirty_lock(&page, 1, true);
kfree(ao->op_notifier);
ao->op_notifier = NULL;
@@ -867,7 +866,7 @@ int rds_cmsg_atomic(struct rds_sock *rs, struct rds_message *rm,
return ret;
err:
if (page)
- put_page(page);
+ put_user_page(page);
rm->atomic.op_active = 0;
kfree(rm->atomic.op_notifier);
--
2.22.0
^ permalink raw reply related
* [PATCH 01/34] mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
From: john.hubbard @ 2019-08-02 2:16 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard, Matthew Wilcox, Christoph Hellwig
In-Reply-To: <20190802021653.4882-1-jhubbard@nvidia.com>
From: John Hubbard <jhubbard@nvidia.com>
Provide more capable variation of put_user_pages_dirty_lock(),
and delete put_user_pages_dirty(). This is based on the
following:
1. Lots of call sites become simpler if a bool is passed
into put_user_page*(), instead of making the call site
choose which put_user_page*() variant to call.
2. Christoph Hellwig's observation that set_page_dirty_lock()
is usually correct, and set_page_dirty() is usually a
bug, or at least questionable, within a put_user_page*()
calling chain.
This leads to the following API choices:
* put_user_pages_dirty_lock(page, npages, make_dirty)
* There is no put_user_pages_dirty(). You have to
hand code that, in the rare case that it's
required.
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/infiniband/core/umem.c | 5 +-
drivers/infiniband/hw/hfi1/user_pages.c | 5 +-
drivers/infiniband/hw/qib/qib_user_pages.c | 5 +-
drivers/infiniband/hw/usnic/usnic_uiom.c | 5 +-
drivers/infiniband/sw/siw/siw_mem.c | 10 +-
include/linux/mm.h | 5 +-
mm/gup.c | 115 +++++++++------------
7 files changed, 58 insertions(+), 92 deletions(-)
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 08da840ed7ee..965cf9dea71a 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -54,10 +54,7 @@ static void __ib_umem_release(struct ib_device *dev, struct ib_umem *umem, int d
for_each_sg_page(umem->sg_head.sgl, &sg_iter, umem->sg_nents, 0) {
page = sg_page_iter_page(&sg_iter);
- if (umem->writable && dirty)
- put_user_pages_dirty_lock(&page, 1);
- else
- put_user_page(page);
+ put_user_pages_dirty_lock(&page, 1, umem->writable && dirty);
}
sg_free_table(&umem->sg_head);
diff --git a/drivers/infiniband/hw/hfi1/user_pages.c b/drivers/infiniband/hw/hfi1/user_pages.c
index b89a9b9aef7a..469acb961fbd 100644
--- a/drivers/infiniband/hw/hfi1/user_pages.c
+++ b/drivers/infiniband/hw/hfi1/user_pages.c
@@ -118,10 +118,7 @@ int hfi1_acquire_user_pages(struct mm_struct *mm, unsigned long vaddr, size_t np
void hfi1_release_user_pages(struct mm_struct *mm, struct page **p,
size_t npages, bool dirty)
{
- if (dirty)
- put_user_pages_dirty_lock(p, npages);
- else
- put_user_pages(p, npages);
+ put_user_pages_dirty_lock(p, npages, dirty);
if (mm) { /* during close after signal, mm can be NULL */
atomic64_sub(npages, &mm->pinned_vm);
diff --git a/drivers/infiniband/hw/qib/qib_user_pages.c b/drivers/infiniband/hw/qib/qib_user_pages.c
index bfbfbb7e0ff4..6bf764e41891 100644
--- a/drivers/infiniband/hw/qib/qib_user_pages.c
+++ b/drivers/infiniband/hw/qib/qib_user_pages.c
@@ -40,10 +40,7 @@
static void __qib_release_user_pages(struct page **p, size_t num_pages,
int dirty)
{
- if (dirty)
- put_user_pages_dirty_lock(p, num_pages);
- else
- put_user_pages(p, num_pages);
+ put_user_pages_dirty_lock(p, num_pages, dirty);
}
/**
diff --git a/drivers/infiniband/hw/usnic/usnic_uiom.c b/drivers/infiniband/hw/usnic/usnic_uiom.c
index 0b0237d41613..62e6ffa9ad78 100644
--- a/drivers/infiniband/hw/usnic/usnic_uiom.c
+++ b/drivers/infiniband/hw/usnic/usnic_uiom.c
@@ -75,10 +75,7 @@ static void usnic_uiom_put_pages(struct list_head *chunk_list, int dirty)
for_each_sg(chunk->page_list, sg, chunk->nents, i) {
page = sg_page(sg);
pa = sg_phys(sg);
- if (dirty)
- put_user_pages_dirty_lock(&page, 1);
- else
- put_user_page(page);
+ put_user_pages_dirty_lock(&page, 1, dirty);
usnic_dbg("pa: %pa\n", &pa);
}
kfree(chunk);
diff --git a/drivers/infiniband/sw/siw/siw_mem.c b/drivers/infiniband/sw/siw/siw_mem.c
index 67171c82b0c4..ab83a9cec562 100644
--- a/drivers/infiniband/sw/siw/siw_mem.c
+++ b/drivers/infiniband/sw/siw/siw_mem.c
@@ -63,15 +63,7 @@ struct siw_mem *siw_mem_id2obj(struct siw_device *sdev, int stag_index)
static void siw_free_plist(struct siw_page_chunk *chunk, int num_pages,
bool dirty)
{
- struct page **p = chunk->plist;
-
- while (num_pages--) {
- if (!PageDirty(*p) && dirty)
- put_user_pages_dirty_lock(p, 1);
- else
- put_user_page(*p);
- p++;
- }
+ put_user_pages_dirty_lock(chunk->plist, num_pages, dirty);
}
void siw_umem_release(struct siw_umem *umem, bool dirty)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 0334ca97c584..9759b6a24420 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1057,8 +1057,9 @@ static inline void put_user_page(struct page *page)
put_page(page);
}
-void put_user_pages_dirty(struct page **pages, unsigned long npages);
-void put_user_pages_dirty_lock(struct page **pages, unsigned long npages);
+void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
+ bool make_dirty);
+
void put_user_pages(struct page **pages, unsigned long npages);
#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
diff --git a/mm/gup.c b/mm/gup.c
index 98f13ab37bac..7fefd7ab02c4 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -29,85 +29,70 @@ struct follow_page_context {
unsigned int page_mask;
};
-typedef int (*set_dirty_func_t)(struct page *page);
-
-static void __put_user_pages_dirty(struct page **pages,
- unsigned long npages,
- set_dirty_func_t sdf)
-{
- unsigned long index;
-
- for (index = 0; index < npages; index++) {
- struct page *page = compound_head(pages[index]);
-
- /*
- * Checking PageDirty at this point may race with
- * clear_page_dirty_for_io(), but that's OK. Two key cases:
- *
- * 1) This code sees the page as already dirty, so it skips
- * the call to sdf(). That could happen because
- * clear_page_dirty_for_io() called page_mkclean(),
- * followed by set_page_dirty(). However, now the page is
- * going to get written back, which meets the original
- * intention of setting it dirty, so all is well:
- * clear_page_dirty_for_io() goes on to call
- * TestClearPageDirty(), and write the page back.
- *
- * 2) This code sees the page as clean, so it calls sdf().
- * The page stays dirty, despite being written back, so it
- * gets written back again in the next writeback cycle.
- * This is harmless.
- */
- if (!PageDirty(page))
- sdf(page);
-
- put_user_page(page);
- }
-}
-
/**
- * put_user_pages_dirty() - release and dirty an array of gup-pinned pages
- * @pages: array of pages to be marked dirty and released.
+ * put_user_pages_dirty_lock() - release and optionally dirty gup-pinned pages
+ * @pages: array of pages to be maybe marked dirty, and definitely released.
* @npages: number of pages in the @pages array.
+ * @make_dirty: whether to mark the pages dirty
*
* "gup-pinned page" refers to a page that has had one of the get_user_pages()
* variants called on that page.
*
* For each page in the @pages array, make that page (or its head page, if a
- * compound page) dirty, if it was previously listed as clean. Then, release
- * the page using put_user_page().
+ * compound page) dirty, if @make_dirty is true, and if the page was previously
+ * listed as clean. In any case, releases all pages using put_user_page(),
+ * possibly via put_user_pages(), for the non-dirty case.
*
* Please see the put_user_page() documentation for details.
*
- * set_page_dirty(), which does not lock the page, is used here.
- * Therefore, it is the caller's responsibility to ensure that this is
- * safe. If not, then put_user_pages_dirty_lock() should be called instead.
+ * set_page_dirty_lock() is used internally. If instead, set_page_dirty() is
+ * required, then the caller should a) verify that this is really correct,
+ * because _lock() is usually required, and b) hand code it:
+ * set_page_dirty_lock(), put_user_page().
*
*/
-void put_user_pages_dirty(struct page **pages, unsigned long npages)
+void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
+ bool make_dirty)
{
- __put_user_pages_dirty(pages, npages, set_page_dirty);
-}
-EXPORT_SYMBOL(put_user_pages_dirty);
+ unsigned long index;
-/**
- * put_user_pages_dirty_lock() - release and dirty an array of gup-pinned pages
- * @pages: array of pages to be marked dirty and released.
- * @npages: number of pages in the @pages array.
- *
- * For each page in the @pages array, make that page (or its head page, if a
- * compound page) dirty, if it was previously listed as clean. Then, release
- * the page using put_user_page().
- *
- * Please see the put_user_page() documentation for details.
- *
- * This is just like put_user_pages_dirty(), except that it invokes
- * set_page_dirty_lock(), instead of set_page_dirty().
- *
- */
-void put_user_pages_dirty_lock(struct page **pages, unsigned long npages)
-{
- __put_user_pages_dirty(pages, npages, set_page_dirty_lock);
+ /*
+ * TODO: this can be optimized for huge pages: if a series of pages is
+ * physically contiguous and part of the same compound page, then a
+ * single operation to the head page should suffice.
+ */
+
+ if (!make_dirty) {
+ put_user_pages(pages, npages);
+ return;
+ }
+
+ for (index = 0; index < npages; index++) {
+ struct page *page = compound_head(pages[index]);
+ /*
+ * Checking PageDirty at this point may race with
+ * clear_page_dirty_for_io(), but that's OK. Two key
+ * cases:
+ *
+ * 1) This code sees the page as already dirty, so it
+ * skips the call to set_page_dirty(). That could happen
+ * because clear_page_dirty_for_io() called
+ * page_mkclean(), followed by set_page_dirty().
+ * However, now the page is going to get written back,
+ * which meets the original intention of setting it
+ * dirty, so all is well: clear_page_dirty_for_io() goes
+ * on to call TestClearPageDirty(), and write the page
+ * back.
+ *
+ * 2) This code sees the page as clean, so it calls
+ * set_page_dirty(). The page stays dirty, despite being
+ * written back, so it gets written back again in the
+ * next writeback cycle. This is harmless.
+ */
+ if (!PageDirty(page))
+ set_page_dirty_lock(page);
+ put_user_page(page);
+ }
}
EXPORT_SYMBOL(put_user_pages_dirty_lock);
--
2.22.0
^ permalink raw reply related
* [PATCH 00/34] put_user_pages(): miscellaneous call sites
From: john.hubbard @ 2019-08-02 2:16 UTC (permalink / raw)
To: Andrew Morton
Cc: Christoph Hellwig, Dan Williams, Dave Chinner, Dave Hansen,
Ira Weiny, Jan Kara, Jason Gunthorpe, Jérôme Glisse,
LKML, amd-gfx, ceph-devel, devel, devel, dri-devel, intel-gfx,
kvm, linux-arm-kernel, linux-block, linux-crypto, linux-fbdev,
linux-fsdevel, linux-media, linux-mm, linux-nfs, linux-rdma,
linux-rpi-kernel, linux-xfs, netdev, rds-devel, sparclinux, x86,
xen-devel, John Hubbard
From: John Hubbard <jhubbard@nvidia.com>
Hi,
These are best characterized as miscellaneous conversions: many (not all)
call sites that don't involve biovec or iov_iter, nor mm/. It also leaves
out a few call sites that require some more work. These are mostly pretty
simple ones.
It's probably best to send all of these via Andrew's -mm tree, assuming
that there are no significant merge conflicts with ongoing work in other
trees (which I doubt, given that these are small changes).
These patches apply to the latest linux.git. Patch #1 is also already in
Andrew's tree, but given the broad non-linux-mm Cc list, I thought it
would be more convenient to just include that patch here, so that people
can use linux.git as the base--even though these are probably destined
for linux-mm.
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions"). That commit
has an extensive description of the problem and the planned steps to
solve it, but the highlites are:
1) Provide put_user_page*() routines, intended to be used
for releasing pages that were pinned via get_user_pages*().
2) Convert all of the call sites for get_user_pages*(), to
invoke put_user_page*(), instead of put_page(). This involves dozens of
call sites, and will take some time.
3) After (2) is complete, use get_user_pages*() and put_user_page*() to
implement tracking of these pages. This tracking will be separate from
the existing struct page refcounting.
4) Use the tracking and identification of these pages, to implement
special handling (especially in writeback paths) when the pages are
backed by a filesystem.
And a few references, also from that commit:
[1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()"
[2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()"
Ira Weiny (1):
fs/binfmt_elf: convert put_page() to put_user_page*()
John Hubbard (33):
mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
net/rds: convert put_page() to put_user_page*()
net/ceph: convert put_page() to put_user_page*()
x86/kvm: convert put_page() to put_user_page*()
drm/etnaviv: convert release_pages() to put_user_pages()
drm/i915: convert put_page() to put_user_page*()
drm/radeon: convert put_page() to put_user_page*()
media/ivtv: convert put_page() to put_user_page*()
media/v4l2-core/mm: convert put_page() to put_user_page*()
genwqe: convert put_page() to put_user_page*()
scif: convert put_page() to put_user_page*()
vmci: convert put_page() to put_user_page*()
rapidio: convert put_page() to put_user_page*()
oradax: convert put_page() to put_user_page*()
staging/vc04_services: convert put_page() to put_user_page*()
drivers/tee: convert put_page() to put_user_page*()
vfio: convert put_page() to put_user_page*()
fbdev/pvr2fb: convert put_page() to put_user_page*()
fsl_hypervisor: convert put_page() to put_user_page*()
xen: convert put_page() to put_user_page*()
fs/exec.c: convert put_page() to put_user_page*()
orangefs: convert put_page() to put_user_page*()
uprobes: convert put_page() to put_user_page*()
futex: convert put_page() to put_user_page*()
mm/frame_vector.c: convert put_page() to put_user_page*()
mm/gup_benchmark.c: convert put_page() to put_user_page*()
mm/memory.c: convert put_page() to put_user_page*()
mm/madvise.c: convert put_page() to put_user_page*()
mm/process_vm_access.c: convert put_page() to put_user_page*()
crypt: convert put_page() to put_user_page*()
nfs: convert put_page() to put_user_page*()
goldfish_pipe: convert put_page() to put_user_page*()
kernel/events/core.c: convert put_page() to put_user_page*()
arch/x86/kvm/svm.c | 4 +-
crypto/af_alg.c | 7 +-
drivers/gpu/drm/etnaviv/etnaviv_gem.c | 4 +-
drivers/gpu/drm/i915/gem/i915_gem_userptr.c | 9 +-
drivers/gpu/drm/radeon/radeon_ttm.c | 2 +-
drivers/infiniband/core/umem.c | 5 +-
drivers/infiniband/hw/hfi1/user_pages.c | 5 +-
drivers/infiniband/hw/qib/qib_user_pages.c | 5 +-
drivers/infiniband/hw/usnic/usnic_uiom.c | 5 +-
drivers/infiniband/sw/siw/siw_mem.c | 10 +-
drivers/media/pci/ivtv/ivtv-udma.c | 14 +--
drivers/media/pci/ivtv/ivtv-yuv.c | 10 +-
drivers/media/v4l2-core/videobuf-dma-sg.c | 3 +-
drivers/misc/genwqe/card_utils.c | 17 +--
drivers/misc/mic/scif/scif_rma.c | 17 ++-
drivers/misc/vmw_vmci/vmci_context.c | 2 +-
drivers/misc/vmw_vmci/vmci_queue_pair.c | 11 +-
drivers/platform/goldfish/goldfish_pipe.c | 9 +-
drivers/rapidio/devices/rio_mport_cdev.c | 9 +-
drivers/sbus/char/oradax.c | 2 +-
.../interface/vchiq_arm/vchiq_2835_arm.c | 10 +-
drivers/tee/tee_shm.c | 10 +-
drivers/vfio/vfio_iommu_type1.c | 8 +-
drivers/video/fbdev/pvr2fb.c | 3 +-
drivers/virt/fsl_hypervisor.c | 7 +-
drivers/xen/gntdev.c | 5 +-
drivers/xen/privcmd.c | 7 +-
fs/binfmt_elf.c | 2 +-
fs/binfmt_elf_fdpic.c | 2 +-
fs/exec.c | 2 +-
fs/nfs/direct.c | 4 +-
fs/orangefs/orangefs-bufmap.c | 7 +-
include/linux/mm.h | 5 +-
kernel/events/core.c | 2 +-
kernel/events/uprobes.c | 6 +-
kernel/futex.c | 10 +-
mm/frame_vector.c | 4 +-
mm/gup.c | 115 ++++++++----------
mm/gup_benchmark.c | 2 +-
mm/madvise.c | 2 +-
mm/memory.c | 2 +-
mm/process_vm_access.c | 18 +--
net/ceph/pagevec.c | 8 +-
net/rds/info.c | 5 +-
net/rds/message.c | 2 +-
net/rds/rdma.c | 15 ++-
virt/kvm/kvm_main.c | 4 +-
47 files changed, 151 insertions(+), 266 deletions(-)
--
2.22.0
^ permalink raw reply
* Re: [PATCH net-next 1/2] net: phy: broadcom: set features explicitly for BCM54616S
From: Tao Ren @ 2019-08-02 1:29 UTC (permalink / raw)
To: Heiner Kallweit, Andrew Lunn
Cc: Florian Fainelli, David S . Miller, Arun Parameswaran,
Justin Chen, Vladimir Oltean, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Andrew Jeffery,
openbmc@lists.ozlabs.org
In-Reply-To: <88f4d709-d9bb-943c-37a9-aeebe8ca0ebc@fb.com>
On 7/31/19 10:20 PM, Tao Ren wrote:
> On 7/30/19 11:00 PM, Tao Ren wrote:
>> On 7/30/19 10:53 PM, Heiner Kallweit wrote:
>>> On 31.07.2019 02:12, Tao Ren wrote:
>>>> On 7/29/19 11:00 PM, Heiner Kallweit wrote:
>>>>> On 30.07.2019 07:05, Tao Ren wrote:
>>>>>> On 7/29/19 8:35 PM, Andrew Lunn wrote:
>>>>>>> On Mon, Jul 29, 2019 at 05:25:32PM -0700, Tao Ren wrote:
>>>>>>>> BCM54616S feature "PHY_GBIT_FEATURES" was removed by commit dcdecdcfe1fc
>>>>>>>> ("net: phy: switch drivers to use dynamic feature detection"). As dynamic
>>>>>>>> feature detection doesn't work when BCM54616S is working in RGMII-Fiber
>>>>>>>> mode (different sets of MII Control/Status registers being used), let's
>>>>>>>> set "PHY_GBIT_FEATURES" for BCM54616S explicitly.
>>>>>>>
>>>>>>> Hi Tao
>>>>>>>
>>>>>>> What exactly does it get wrong?
>>>>>>>
>>>>>>> Thanks
>>>>>>> Andrew
>>>>>>
>>>>>> Hi Andrew,
>>>>>>
>>>>>> BCM54616S is set to RGMII-Fiber (1000Base-X) mode on my platform, and none of the features (1000BaseT/100BaseT/10BaseT) can be detected by genphy_read_abilities(), because the PHY only reports 1000BaseX_Full|Half ability in this mode.
>>>>>>
>>>>> Are you going to use the PHY in copper or fibre mode?
>>>>> In case you use fibre mode, why do you need the copper modes set as supported?
>>>>> Or does the PHY just start in fibre mode and you want to switch it to copper mode?
>>>>
>>>> Hi Heiner,
>>>>
>>>> The phy starts in fiber mode and that's the mode I want.
>>>> My observation is: phydev->link is always 0 (Link status bit is never set in MII_BMSR) by using dynamic ability detection on my machine. I checked phydev->supported and it's set to "AutoNeg | TP | MII | Pause | Asym_Pause" by dynamic ability detection. Is it normal/expected? Or maybe the fix should go to different places? Thank you for your help.
>>>>
>>>
>>> Not sure whether you stated already which kernel version you're using.
>>> There's a brand-new extension to auto-detect 1000BaseX:
>>> f30e33bcdab9 ("net: phy: Add more 1000BaseX support detection")
>>> It's included in the 5.3-rc series.
>>
>> I'm running kernel 5.2.0. Thank you for the sharing and I didn't know the patch. Let me check it out.
>
> I applied above patch and ca72efb6bdc7 ("net: phy: Add detection of 1000BaseX link mode support") to my 5.2.0 tree but got following warning when booting up my machine:
>
> "PHY advertising (0,00000200,000062c0) more modes than genphy supports, some modes not advertised".
>
> The BCM54616S PHY on my machine only reports 1000-X features in RGMII->1000Base-KX mode. Is it a known problem?
>
> Anyways let me see if I missed some dependency/follow-up patches..
Let's ignore the patch ("net: phy: broadcom: set features explicitly for BCM54616S"): as Heiner pointed out, it doesn't make sense to turn on copper features for fiber mode (even though it "works" in my environment). I will work out new patch if 1000bx-auto-detection patches cannot solve my problem.
Thank you all for spending time on this.
Cheers,
Tao
^ permalink raw reply
* Re: [net v1 PATCH 4/4] net: fix bpf_xdp_adjust_head regression for generic-XDP
From: Jakub Kicinski @ 2019-08-02 0:44 UTC (permalink / raw)
To: Jesper Dangaard Brouer
Cc: netdev, David S. Miller, xdp-newbies, Daniel Borkmann,
brandon.cazander, Alexei Starovoitov
In-Reply-To: <156468243184.27559.7002090473019021952.stgit@firesoul>
On Thu, 01 Aug 2019 20:00:31 +0200, Jesper Dangaard Brouer wrote:
> When generic-XDP was moved to a later processing step by commit
> 458bf2f224f0 ("net: core: support XDP generic on stacked devices.")
> a regression was introduced when using bpf_xdp_adjust_head.
>
> The issue is that after this commit the skb->network_header is now
> changed prior to calling generic XDP and not after. Thus, if the header
> is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header
> also need to be updated again. Fix by calling skb_reset_network_header().
>
> Fixes: 458bf2f224f0 ("net: core: support XDP generic on stacked devices.")
> Reported-by: Brandon Cazander <brandon.cazander@multapplied.net>
> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Out of curiosity what was your conclusion regarding resetting the
transport header as well?
^ permalink raw reply
* Re: [PATCH net v3] net: bridge: move vlan init/deinit to NETDEV_REGISTER/UNREGISTER
From: Nikolay Aleksandrov @ 2019-08-02 0:38 UTC (permalink / raw)
To: netdev; +Cc: roopa, davem, bridge, michael-dev
In-Reply-To: <20190731224955.10908-1-nikolay@cumulusnetworks.com>
On 8/1/19 1:49 AM, Nikolay Aleksandrov wrote:
[snip]
> [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389
>
> Reported-by: michael-dev <michael-dev@fami-braun.de>
> Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid")
> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
> ---
> I tried a few different approaches to resolve this but they were all
> unsuitable for some kernels, this approach can go to stables easily
> and IMO is the way this had to be done from the start. Alternatively
> we could move only the br_vlan_add and pair it with a br_vlan_del of
> default_pvid on the same events, but I don't think it hurts to move
> the whole init/deinit there as it'd help older stable releases as well.
>
> I also tested the br_vlan_init error handling after the move by always
> returning errors from all over it. Since errors at NETDEV_REGISTER cause
> NETDEV_UNREGISTER we can deinit vlans properly for all cases regardless
> why it happened (e.g. device destruction or init error).
>
> net/bridge/br.c | 5 ++++-
> net/bridge/br_device.c | 10 ----------
> net/bridge/br_private.h | 20 +++++---------------
> net/bridge/br_vlan.c | 25 ++++++++++++++++++-------
> 4 files changed, 27 insertions(+), 33 deletions(-)
>
Self-NAK, after thinking more about how to best handle this and running more
tests I believe it'll be better to go with the alternative I suggested above -
to move out only the default pvid add out of br_vlan_init to NETDEV_REGSITER
and pair it with br_vlan_delete in NETDEV_UNREGISTER. That way we'll split
the init/deinit in 2 steps, but we'll keep the current order and will reduce
the churn for this fix, functionally it should be equivalent as that is the
problematic part of the init which has to be done after the netdev has been
registered.
I'll spin v4 tomorrow after running more tests with it.
^ permalink raw reply
* Re: [PATCH net 0/2] flow_offload hardware priority fixes
From: Jakub Kicinski @ 2019-08-02 0:20 UTC (permalink / raw)
To: Pablo Neira Ayuso
Cc: netfilter-devel, davem, netdev, marcelo.leitner, jiri, wenxu,
saeedm, paulb, gerlitz.or
In-Reply-To: <20190801112817.24976-1-pablo@netfilter.org>
On Thu, 1 Aug 2019 13:28:15 +0200, Pablo Neira Ayuso wrote:
> Please, apply, thank you.
I'm still waiting for a reply.
Perhaps since Pablo doesn't want to talk to me someone else can explain
to me why we want to seemingly diverge from the software model?
^ permalink raw reply
* Re: [PATCH net-next 00/15] net: Add functional tests for L3 and L4
From: Alexei Starovoitov @ 2019-08-02 0:19 UTC (permalink / raw)
To: David Ahern; +Cc: davem, netdev, David Ahern
In-Reply-To: <20190801185648.27653-1-dsahern@kernel.org>
On Thu, Aug 01, 2019 at 11:56:33AM -0700, David Ahern wrote:
> From: David Ahern <dsahern@gmail.com>
>
> This is a port the functional test cases created during the development
> of the VRF feature. It covers various permutations of icmp, tcp and udp
> for IPv4 and IPv6 including negative tests.
Thanks a lot for doing this!
Is there expected output ?
All tests suppose to pass on the latest net-next?
I'm seeing:
./fcnal-test.sh
...
SYSCTL: net.ipv4.raw_l3mdev_accept=0
TEST: ping out - ns-B IP [ OK ]
TEST: ping out, device bind - ns-B IP [ OK ]
TEST: ping out, address bind - ns-B IP [FAIL]
TEST: ping out - ns-B loopback IP [ OK ]
TEST: ping out, device bind - ns-B loopback IP [ OK ]
TEST: ping out, address bind - ns-B loopback IP [FAIL]
TEST: ping in - ns-A IP [ OK ]
TEST: ping in - ns-A loopback IP [ OK ]
TEST: ping local - ns-A IP [ OK ]
TEST: ping local - ns-A loopback IP [ OK ]
TEST: ping local - loopback [ OK ]
TEST: ping local, device bind - ns-A IP [ OK ]
TEST: ping local, device bind - ns-A loopback IP [FAIL]
TEST: ping local, device bind - loopback [FAIL]
with -v I see:
COMMAND: ip netns exec ns-A ping -c1 -w1 -I 172.16.2.1 172.16.1.2
ping: unknown iface 172.16.2.1
TEST: ping out, address bind - ns-B IP [FAIL]
Any tips for further debug?
Do you really need 'sleep 1' everywhere?
It makes them so slow to run...
What happens if you just remove it ? Tests will fail? Why?
^ permalink raw reply
* Re: [net-next 2/9] i40e: make visible changed vf mac on host
From: Shannon Nelson @ 2019-08-02 0:11 UTC (permalink / raw)
To: Jeff Kirsher, davem
Cc: Aleksandr Loktionov, netdev, nhorman, sassmann, Andrew Bowers
In-Reply-To: <20190801205149.4114-3-jeffrey.t.kirsher@intel.com>
On 8/1/19 1:51 PM, Jeff Kirsher wrote:
> From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
>
> This patch makes changed VM mac address visible on host via
> ip link show command. This problem is fixed by copying last
> unicast mac filter to vf->default_lan_addr.addr. Without
> this patch if VF MAC was not set from host side and
> if you run ip link show $pf, on host side you'd always
> see a zero MAC, not the real VF MAC that VF assigned to
> itself.
>
> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
> drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> index 02b09a8ad54c..21f7ac514d1f 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> @@ -2629,6 +2629,9 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg)
> } else {
> vf->num_mac++;
> }
> + if (is_valid_ether_addr(al->list[i].addr))
> + ether_addr_copy(vf->default_lan_addr.addr,
> + al->list[i].addr);
> }
> }
> spin_unlock_bh(&vsi->mac_filter_hash_lock);
Since this copy is done inside the for-loop, it looks like you are
copying every address in the list, not just the last one. This seems
wasteful and unnecessary.
Since it is possible, altho' unlikely, that the filter sync that happens
a little later could fail, might it be better to do the copy after you
know that the sync has succeeded?
Why is the last mac chosen for display rather than the first? Is there
anything special about the last mac as opposed to the first mac?
sln
^ permalink raw reply
* [PATCH net-next] selftests: Add l2tp tests
From: David Ahern @ 2019-08-01 23:54 UTC (permalink / raw)
To: davem; +Cc: netdev, David Ahern
From: David Ahern <dsahern@gmail.com>
Add IPv4 and IPv6 l2tp tests. Current set is over IP and with
IPsec.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
The ipsec tests expose a netdev refcount leak that I have not had
time to track down, but the tests themselves are good.
tools/testing/selftests/net/l2tp.sh | 382 ++++++++++++++++++++++++++++++++++++
1 file changed, 382 insertions(+)
create mode 100644 tools/testing/selftests/net/l2tp.sh
diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh
new file mode 100644
index 000000000000..5782433886fc
--- /dev/null
+++ b/tools/testing/selftests/net/l2tp.sh
@@ -0,0 +1,382 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# L2TPv3 tunnel between 2 hosts
+#
+# host-1 | router | host-2
+# | |
+# lo l2tp | | l2tp lo
+# 172.16.101.1 172.16.1.1 | | 172.16.1.2 172.16.101.2
+# fc00:101::1 fc00:1::1 | | fc00:1::2 fc00:101::2
+# | |
+# eth0 | | eth0
+# 10.1.1.1 | | 10.1.2.1
+# 2001:db8:1::1 | | 2001:db8:2::1
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+################################################################################
+#
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ printf "TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+run_cmd()
+{
+ local ns
+ local cmd
+ local out
+ local rc
+
+ ns="$1"
+ shift
+ cmd="$*"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf " COMMAND: $cmd\n"
+ fi
+
+ out=$(eval ip netns exec ${ns} ${cmd} 2>&1)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+
+ return $rc
+}
+
+################################################################################
+# create namespaces and interconnects
+
+create_ns()
+{
+ local ns=$1
+ local addr=$2
+ local addr6=$3
+
+ [ -z "${addr}" ] && addr="-"
+ [ -z "${addr6}" ] && addr6="-"
+
+ ip netns add ${ns}
+
+ ip -netns ${ns} link set lo up
+ if [ "${addr}" != "-" ]; then
+ ip -netns ${ns} addr add dev lo ${addr}
+ fi
+ if [ "${addr6}" != "-" ]; then
+ ip -netns ${ns} -6 addr add dev lo ${addr6}
+ fi
+
+ ip -netns ${ns} ro add unreachable default metric 8192
+ ip -netns ${ns} -6 ro add unreachable default metric 8192
+
+ ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+ local ns1=$1
+ local ns1_dev=$2
+ local ns1_addr=$3
+ local ns1_addr6=$4
+ local ns2=$5
+ local ns2_dev=$6
+ local ns2_addr=$7
+ local ns2_addr6=$8
+
+ ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp
+ ip -netns ${ns1} li set ${ns1_dev} up
+ ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev}
+ ip -netns ${ns2} li set ${ns2_dev} up
+
+ if [ "${ns1_addr}" != "-" ]; then
+ ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr}
+ ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr}
+ fi
+
+ if [ "${ns1_addr6}" != "-" ]; then
+ ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6}
+ ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6}
+ fi
+}
+
+################################################################################
+# test setup
+
+cleanup()
+{
+ local ns
+
+ for ns in host-1 host-2 router
+ do
+ ip netns del ${ns} 2>/dev/null
+ done
+}
+
+setup_l2tp_ipv4()
+{
+ #
+ # configure l2tpv3 tunnel on host-1
+ #
+ ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \
+ encap ip local 10.1.1.1 remote 10.1.2.1
+ ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \
+ session_id 1041 peer_session_id 1042
+ ip -netns host-1 link set dev l2tp4 up
+ ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
+
+ #
+ # configure l2tpv3 tunnel on host-2
+ #
+ ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \
+ encap ip local 10.1.2.1 remote 10.1.1.1
+ ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \
+ session_id 1042 peer_session_id 1041
+ ip -netns host-2 link set dev l2tp4 up
+ ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
+
+ #
+ # add routes to loopback addresses
+ #
+ ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2
+ ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1
+}
+
+setup_l2tp_ipv6()
+{
+ #
+ # configure l2tpv3 tunnel on host-1
+ #
+ ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \
+ encap ip local 2001:db8:1::1 remote 2001:db8:2::1
+ ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \
+ session_id 1061 peer_session_id 1062
+ ip -netns host-1 link set dev l2tp6 up
+ ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
+
+ #
+ # configure l2tpv3 tunnel on host-2
+ #
+ ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \
+ encap ip local 2001:db8:2::1 remote 2001:db8:1::1
+ ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \
+ session_id 1062 peer_session_id 1061
+ ip -netns host-2 link set dev l2tp6 up
+ ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
+
+ #
+ # add routes to loopback addresses
+ #
+ ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2
+ ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1
+}
+
+setup()
+{
+ # start clean
+ cleanup
+
+ set -e
+ create_ns host-1 172.16.101.1/32 fc00:101::1/128
+ create_ns host-2 172.16.101.2/32 fc00:101::2/128
+ create_ns router
+
+ connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \
+ router eth1 10.1.1.2/24 2001:db8:1::2/64
+
+ connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \
+ router eth2 10.1.2.2/24 2001:db8:2::2/64
+
+ ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2
+ ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
+
+ ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2
+ ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
+
+ setup_l2tp_ipv4
+ setup_l2tp_ipv6
+ set +e
+}
+
+setup_ipsec()
+{
+ #
+ # IPv4
+ #
+ run_cmd host-1 ip xfrm policy add \
+ src 10.1.1.1 dst 10.1.2.1 dir out \
+ tmpl proto esp mode transport
+
+ run_cmd host-1 ip xfrm policy add \
+ src 10.1.2.1 dst 10.1.1.1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip xfrm policy add \
+ src 10.1.1.1 dst 10.1.2.1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip xfrm policy add \
+ src 10.1.2.1 dst 10.1.1.1 dir out \
+ tmpl proto esp mode transport
+
+ ip -netns host-1 xfrm state add \
+ src 10.1.1.1 dst 10.1.2.1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-1 xfrm state add \
+ src 10.1.2.1 dst 10.1.1.1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 xfrm state add \
+ src 10.1.1.1 dst 10.1.2.1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 xfrm state add \
+ src 10.1.2.1 dst 10.1.1.1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ #
+ # IPV6
+ #
+ run_cmd host-1 ip -6 xfrm policy add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 dir out \
+ tmpl proto esp mode transport
+
+ run_cmd host-1 ip -6 xfrm policy add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip -6 xfrm policy add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 dir in \
+ tmpl proto esp mode transport
+
+ run_cmd host-2 ip -6 xfrm policy add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 dir out \
+ tmpl proto esp mode transport
+
+ ip -netns host-1 -6 xfrm state add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-1 -6 xfrm state add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 -6 xfrm state add \
+ src 2001:db8:1::1 dst 2001:db8:2::1 \
+ spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+ ip -netns host-2 -6 xfrm state add \
+ src 2001:db8:2::1 dst 2001:db8:1::1 \
+ spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+ 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+}
+
+teardown_ipsec()
+{
+ run_cmd host-1 ip xfrm state flush
+ run_cmd host-1 ip xfrm policy flush
+ run_cmd host-2 ip xfrm state flush
+ run_cmd host-2 ip xfrm policy flush
+}
+
+################################################################################
+# generate traffic through tunnel for various cases
+
+run_ping()
+{
+ local desc="$1"
+
+ run_cmd host-1 ping -c1 -w1 172.16.1.2
+ log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
+
+ run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+ log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
+
+ run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+ log_test $? 0 "IPv6 basic L2TP tunnel ${desc}"
+
+ run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+ log_test $? 0 "IPv6 route through L2TP tunnel ${desc}"
+}
+
+run_tests()
+{
+ local desc
+
+ setup
+ run_ping
+
+ setup_ipsec
+ run_ping "- with IPsec"
+ run_cmd host-1 ping -c1 -w1 172.16.1.2
+ log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
+
+ run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+ log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
+
+ run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+ log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec"
+
+ run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+ log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec"
+
+ teardown_ipsec
+ run_ping "- after IPsec teardown"
+}
+
+################################################################################
+# main
+
+declare -i nfail=0
+declare -i nsuccess=0
+
+while getopts :pv o
+do
+ case $o in
+ p) PAUSE_ON_FAIL=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ *) exit 1;;
+ esac
+done
+
+run_tests
+cleanup
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n" ${nfail}
--
2.11.0
^ permalink raw reply related
* Re: [PATCH v3 bpf-next 02/12] libbpf: implement BPF CO-RE offset relocation algorithm
From: Alexei Starovoitov @ 2019-08-01 23:50 UTC (permalink / raw)
To: Andrii Nakryiko
Cc: bpf, netdev, ast, daniel, yhs, songliubraving, andrii.nakryiko,
kernel-team
In-Reply-To: <20190801064803.2519675-3-andriin@fb.com>
On Wed, Jul 31, 2019 at 11:47:53PM -0700, Andrii Nakryiko wrote:
> This patch implements the core logic for BPF CO-RE offsets relocations.
> Every instruction that needs to be relocated has corresponding
> bpf_offset_reloc as part of BTF.ext. Relocations are performed by trying
> to match recorded "local" relocation spec against potentially many
> compatible "target" types, creating corresponding spec. Details of the
> algorithm are noted in corresponding comments in the code.
>
> Signed-off-by: Andrii Nakryiko <andriin@fb.com>
> Acked-by: Song Liu <songliubraving@fb.com>
...
> + if (btf_is_composite(t)) {
> + const struct btf_member *m = (void *)(t + 1);
> + __u32 offset;
> +
> + if (access_idx >= BTF_INFO_VLEN(t->info))
> + return -EINVAL;
> +
> + m = &m[access_idx];
> +
> + if (BTF_INFO_KFLAG(t->info)) {
> + if (BTF_MEMBER_BITFIELD_SIZE(m->offset))
> + return -EINVAL;
> + offset = BTF_MEMBER_BIT_OFFSET(m->offset);
> + } else {
> + offset = m->offset;
> + }
very similar logic exists in btf_dump.c
probably makes sense to make a common helper at some point.
> +static size_t bpf_core_essential_name_len(const char *name)
> +{
> + size_t n = strlen(name);
> + int i = n - 3;
> +
> + while (i > 0) {
> + if (name[i] == '_' && name[i + 1] == '_' && name[i + 2] == '_')
> + return i;
> + i--;
> + }
> + return n;
> +}
that's a bit of an eye irritant. How about?
size_t n = strlen(name);
int i, cnt = 0;
for (i = n - 1; i >= 0; i--) {
if (name[i] == '_') {
cnt++;
} else {
if (cnt == 3)
return i + 1;
cnt = 0;
}
}
return n;
> + case BTF_KIND_ARRAY: {
> + const struct btf_array *loc_a, *targ_a;
> +
> + loc_a = (void *)(local_type + 1);
> + targ_a = (void *)(targ_type + 1);
> + local_id = loc_a->type;
> + targ_id = targ_a->type;
can we add a helper like:
const struct btf_array *btf_array(cosnt struct btf_type *t)
{
return (const struct btf_array *)(t + 1);
}
then above will be:
case BTF_KIND_ARRAY: {
local_id = btf_array(local_type)->type;
targ_id = btf_array(targ_type)->type;
and a bunch of code in btf.c and btf_dump.c would be cleaner as well?
> + goto recur;
> + }
> + default:
> + pr_warning("unexpected kind %d relocated, local [%d], target [%d]\n",
> + kind, local_id, targ_id);
> + return 0;
> + }
> +}
> +
> +/*
> + * Given single high-level named field accessor in local type, find
> + * corresponding high-level accessor for a target type. Along the way,
> + * maintain low-level spec for target as well. Also keep updating target
> + * offset.
> + *
> + * Searching is performed through recursive exhaustive enumeration of all
> + * fields of a struct/union. If there are any anonymous (embedded)
> + * structs/unions, they are recursively searched as well. If field with
> + * desired name is found, check compatibility between local and target types,
> + * before returning result.
> + *
> + * 1 is returned, if field is found.
> + * 0 is returned if no compatible field is found.
> + * <0 is returned on error.
> + */
> +static int bpf_core_match_member(const struct btf *local_btf,
> + const struct bpf_core_accessor *local_acc,
> + const struct btf *targ_btf,
> + __u32 targ_id,
> + struct bpf_core_spec *spec,
> + __u32 *next_targ_id)
> +{
> + const struct btf_type *local_type, *targ_type;
> + const struct btf_member *local_member, *m;
> + const char *local_name, *targ_name;
> + __u32 local_id;
> + int i, n, found;
> +
> + targ_type = skip_mods_and_typedefs(targ_btf, targ_id, &targ_id);
> + if (!targ_type)
> + return -EINVAL;
> + if (!btf_is_composite(targ_type))
> + return 0;
> +
> + local_id = local_acc->type_id;
> + local_type = btf__type_by_id(local_btf, local_id);
> + local_member = (void *)(local_type + 1);
> + local_member += local_acc->idx;
> + local_name = btf__name_by_offset(local_btf, local_member->name_off);
> +
> + n = BTF_INFO_VLEN(targ_type->info);
> + m = (void *)(targ_type + 1);
new btf_member() helper?
> + for (i = 0; i < n; i++, m++) {
> + __u32 offset;
> +
> + /* bitfield relocations not supported */
> + if (BTF_INFO_KFLAG(targ_type->info)) {
> + if (BTF_MEMBER_BITFIELD_SIZE(m->offset))
> + continue;
> + offset = BTF_MEMBER_BIT_OFFSET(m->offset);
> + } else {
> + offset = m->offset;
> + }
> + if (offset % 8)
> + continue;
same bit of code again?
definitely could use a helper.
> + for (i = 0; i < local_spec->len; i++, local_acc++, targ_acc++) {
> + targ_type = skip_mods_and_typedefs(targ_spec->btf, targ_id,
> + &targ_id);
> + if (!targ_type)
> + return -EINVAL;
> +
> + if (local_acc->name) {
> + matched = bpf_core_match_member(local_spec->btf,
> + local_acc,
> + targ_btf, targ_id,
> + targ_spec, &targ_id);
> + if (matched <= 0)
> + return matched;
> + } else {
> + /* for i=0, targ_id is already treated as array element
> + * type (because it's the original struct), for others
> + * we should find array element type first
> + */
> + if (i > 0) {
> + const struct btf_array *a;
> +
> + if (!btf_is_array(targ_type))
> + return 0;
> +
> + a = (void *)(targ_type + 1);
> + if (local_acc->idx >= a->nelems)
> + return 0;
am I reading it correctly that the local spec requested out-of-bounds
index in the target array type?
Why this is 'ignore' instead of -EINVAL?
> +/*
> + * Probe few well-known locations for vmlinux kernel image and try to load BTF
> + * data out of it to use for target BTF.
> + */
> +static struct btf *bpf_core_find_kernel_btf(void)
> +{
> + const char *locations[] = {
> + "/lib/modules/%1$s/vmlinux-%1$s",
> + "/usr/lib/modules/%1$s/kernel/vmlinux",
> + };
> + char path[PATH_MAX + 1];
> + struct utsname buf;
> + struct btf *btf;
> + int i, err;
> +
> + err = uname(&buf);
> + if (err) {
> + pr_warning("failed to uname(): %d\n", err);
defensive programming ?
I think uname() can fail only if &buf points to non-existing page like null.
> + return ERR_PTR(err);
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(locations); i++) {
> + snprintf(path, PATH_MAX, locations[i], buf.release);
> + pr_debug("attempting to load kernel BTF from '%s'\n", path);
I think this debug message would have been more useful after access().
> +
> + if (access(path, R_OK))
> + continue;
> +
> + btf = btf__parse_elf(path, NULL);
> + if (IS_ERR(btf))
> + continue;
> +
> + pr_debug("successfully loaded kernel BTF from '%s'\n", path);
> + return btf;
> + }
> +
> + pr_warning("failed to find valid kernel BTF\n");
> + return ERR_PTR(-ESRCH);
> +}
> +
> +/* Output spec definition in the format:
> + * [<type-id>] (<type-name>) + <raw-spec> => <offset>@<spec>,
> + * where <spec> is a C-syntax view of recorded field access, e.g.: x.a[3].b
> + */
> +static void bpf_core_dump_spec(int level, const struct bpf_core_spec *spec)
> +{
> + const struct btf_type *t;
> + const char *s;
> + __u32 type_id;
> + int i;
> +
> + type_id = spec->spec[0].type_id;
> + t = btf__type_by_id(spec->btf, type_id);
> + s = btf__name_by_offset(spec->btf, t->name_off);
> + libbpf_print(level, "[%u] (%s) + ", type_id, s);
imo extra []() don't improve readability of the dump.
> +
> + for (i = 0; i < spec->raw_len; i++)
> + libbpf_print(level, "%d%s", spec->raw_spec[i],
> + i == spec->raw_len - 1 ? " => " : ":");
> +
> + libbpf_print(level, "%u @ &x", spec->offset);
> +
> + for (i = 0; i < spec->len; i++) {
> + if (spec->spec[i].name)
> + libbpf_print(level, ".%s", spec->spec[i].name);
> + else
> + libbpf_print(level, "[%u]", spec->spec[i].idx);
> + }
> +
> +}
> +
> +static size_t bpf_core_hash_fn(const void *key, void *ctx)
> +{
> + return (size_t)key;
> +}
> +
> +static bool bpf_core_equal_fn(const void *k1, const void *k2, void *ctx)
> +{
> + return k1 == k2;
> +}
> +
> +static void *u32_to_ptr(__u32 x)
> +{
> + return (void *)(uintptr_t)x;
> +}
u32 to pointer on 64-bit arch?!
That surely needs a comment.
> +
> +/*
> + * CO-RE relocate single instruction.
> + *
> + * The outline and important points of the algorithm:
> + * 1. For given local type, find corresponding candidate target types.
> + * Candidate type is a type with the same "essential" name, ignoring
> + * everything after last triple underscore (___). E.g., `sample`,
> + * `sample___flavor_one`, `sample___flavor_another_one`, are all candidates
> + * for each other. Names with triple underscore are referred to as
> + * "flavors" and are useful, among other things, to allow to
> + * specify/support incompatible variations of the same kernel struct, which
> + * might differ between different kernel versions and/or build
> + * configurations.
> + *
> + * N.B. Struct "flavors" could be generated by bpftool's BTF-to-C
> + * converter, when deduplicated BTF of a kernel still contains more than
> + * one different types with the same name. In that case, ___2, ___3, etc
> + * are appended starting from second name conflict. But start flavors are
> + * also useful to be defined "locally", in BPF program, to extract same
> + * data from incompatible changes between different kernel
> + * versions/configurations. For instance, to handle field renames between
> + * kernel versions, one can use two flavors of the struct name with the
> + * same common name and use conditional relocations to extract that field,
> + * depending on target kernel version.
there are actual kernel types that have ___ in the name.
Ex: struct lmc___media
We probably need to revisit this 'flavor' convention.
> + for (i = 0, j = 0; i < cand_ids->len; i++) {
> + cand_id = cand_ids->data[i];
> + cand_type = btf__type_by_id(targ_btf, cand_id);
> + cand_name = btf__name_by_offset(targ_btf, cand_type->name_off);
> +
> + err = bpf_core_spec_match(&local_spec, targ_btf,
> + cand_id, &cand_spec);
> + if (err < 0) {
> + pr_warning("prog '%s': relo #%d: failed to match spec ",
> + prog_name, relo_idx);
> + bpf_core_dump_spec(LIBBPF_WARN, &local_spec);
> + libbpf_print(LIBBPF_WARN,
> + " to candidate #%d [%d] (%s): %d\n",
> + i, cand_id, cand_name, err);
> + return err;
> + }
> + if (err == 0) {
> + pr_debug("prog '%s': relo #%d: candidate #%d [%d] (%s) doesn't match spec ",
> + prog_name, relo_idx, i, cand_id, cand_name);
> + bpf_core_dump_spec(LIBBPF_DEBUG, &local_spec);
> + libbpf_print(LIBBPF_DEBUG, "\n");
> + continue;
> + }
> +
> + pr_debug("prog '%s': relo #%d: candidate #%d matched as spec ",
> + prog_name, relo_idx, i);
did you mention that you're going to make a helper for this debug dumps?
^ permalink raw reply
* [PATCH v5 0/3] mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
From: john.hubbard @ 2019-08-01 23:47 UTC (permalink / raw)
To: Andrew Morton
Cc: Alexander Viro, Björn Töpel, Boaz Harrosh,
Christoph Hellwig, Daniel Vetter, Dan Williams, Dave Chinner,
David Airlie, David S . Miller, Ilya Dryomov, Jan Kara,
Jason Gunthorpe, Jens Axboe, Jérôme Glisse,
Johannes Thumshirn, Magnus Karlsson, Matthew Wilcox,
Miklos Szeredi, Ming Lei, Sage Weil, Santosh Shilimkar, Yan Zheng,
netdev, dri-devel, linux-mm, linux-rdma, bpf, LKML, John Hubbard
From: John Hubbard <jhubbard@nvidia.com>
Changes since v4:
* Christophe Hellwig's review applied: deleted siw_free_plist() and
__qib_release_user_pages(), now that put_user_pages_dirty_lock() does
what those routines were doing.
* Applied Bjorn's ACK for net/xdp, and Christophe's Reviewed-by for patch
#1.
Changes since v3:
* Fixed an unused variable warning in siw_mem.c
Changes since v2:
* Critical bug fix: remove a stray "break;" from the new routine.
Changes since v1:
* Instead of providing __put_user_pages(), add an argument to
put_user_pages_dirty_lock(), and delete put_user_pages_dirty().
This is based on the following points:
1. Lots of call sites become simpler if a bool is passed
into put_user_page*(), instead of making the call site
choose which put_user_page*() variant to call.
2. Christoph Hellwig's observation that set_page_dirty_lock()
is usually correct, and set_page_dirty() is usually a
bug, or at least questionable, within a put_user_page*()
calling chain.
* Added the Infiniband driver back to the patch series, because it is
a caller of put_user_pages_dirty_lock().
Unchanged parts from the v1 cover letter (except for the diffstat):
Notes about the remaining patches to come:
There are about 50+ patches in my tree [2], and I'll be sending out the
remaining ones in a few more groups:
* The block/bio related changes (Jerome mostly wrote those, but I've
had to move stuff around extensively, and add a little code)
* mm/ changes
* other subsystem patches
* an RFC that shows the current state of the tracking patch set. That
can only be applied after all call sites are converted, but it's
good to get an early look at it.
This is part a tree-wide conversion, as described in commit fc1d8e7cca2d
("mm: introduce put_user_page*(), placeholder versions").
John Hubbard (3):
mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
drivers/gpu/drm/via: convert put_page() to put_user_page*()
net/xdp: convert put_page() to put_user_page*()
drivers/gpu/drm/via/via_dmablit.c | 10 +-
drivers/infiniband/core/umem.c | 5 +-
drivers/infiniband/hw/hfi1/user_pages.c | 5 +-
drivers/infiniband/hw/qib/qib_user_pages.c | 13 +--
drivers/infiniband/hw/usnic/usnic_uiom.c | 5 +-
drivers/infiniband/sw/siw/siw_mem.c | 18 +---
include/linux/mm.h | 5 +-
mm/gup.c | 115 +++++++++------------
net/xdp/xdp_umem.c | 9 +-
9 files changed, 63 insertions(+), 122 deletions(-)
--
2.22.0
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox