* [PATCH v2 0/2] dt-bindings: net: meson-dwmac: convert to yaml
From: Neil Armstrong @ 2019-08-06 12:50 UTC (permalink / raw)
To: robh+dt
Cc: Neil Armstrong, martin.blumenstingl, devicetree, netdev,
linux-amlogic, linux-arm-kernel, linux-kernel
This patchsets converts the Amlogic Meson DWMAC glue bindings over to
YAML schemas using the already converted dwmac bindings.
The first patch is needed because the Amlogic glue needs a supplementary
reg cell to access the DWMAC glue registers.
Neil Armstrong (2):
dt-bindings: net: snps,dwmac: update reg minItems maxItems
dt-bindings: net: meson-dwmac: convert to yaml
.../bindings/net/amlogic,meson-dwmac.yaml | 113 ++++++++++++++++++
.../devicetree/bindings/net/meson-dwmac.txt | 71 -----------
.../devicetree/bindings/net/snps,dwmac.yaml | 8 +-
3 files changed, 120 insertions(+), 72 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/meson-dwmac.txt
--
2.22.0
^ permalink raw reply
* [PATCH v2 2/2] dt-bindings: net: meson-dwmac: convert to yaml
From: Neil Armstrong @ 2019-08-06 12:50 UTC (permalink / raw)
To: robh+dt
Cc: Neil Armstrong, martin.blumenstingl, devicetree, netdev,
linux-amlogic, linux-arm-kernel, linux-kernel
In-Reply-To: <20190806125041.16105-1-narmstrong@baylibre.com>
Now that we have the DT validation in place, let's convert the device tree
bindings for the Synopsys DWMAC Glue for Amlogic SoCs over to a YAML schemas.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/net/amlogic,meson-dwmac.yaml | 113 ++++++++++++++++++
.../devicetree/bindings/net/meson-dwmac.txt | 71 -----------
.../devicetree/bindings/net/snps,dwmac.yaml | 5 +
3 files changed, 118 insertions(+), 71 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/meson-dwmac.txt
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
new file mode 100644
index 000000000000..ae91aa9d8616
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson DWMAC Ethernet controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson6-dwmac
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: GMAC main clock
+ - description: First parent clock of the internal mux
+ - description: Second parent clock of the internal mux
+
+ clock-names:
+ minItems: 3
+ maxItems: 3
+ items:
+ - const: stmmaceth
+ - const: clkin0
+ - const: clkin1
+
+ amlogic,tx-delay-ns:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The internal RGMII TX clock delay (provided by this driver) in
+ nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
+ When phy-mode is set to "rgmii" then the TX delay should be
+ explicitly configured. When not configured a fallback of 2ns is
+ used. When the phy-mode is set to either "rgmii-id" or "rgmii-txid"
+ the TX clock delay is already provided by the PHY. In that case
+ this property should be set to 0ns (which disables the TX clock
+ delay in the MAC to prevent the clock from going off because both
+ PHY and MAC are adding a delay).
+ Any configuration is ignored when the phy-mode is set to "rmii".
+
+properties:
+ compatible:
+ additionalItems: true
+ maxItems: 3
+ items:
+ - enum:
+ - amlogic,meson6-dwmac
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+ contains:
+ enum:
+ - snps,dwmac-3.70a
+ - snps,dwmac
+
+ reg:
+ items:
+ - description:
+ The first register range should be the one of the DWMAC controller
+ - description:
+ The second range is is for the Amlogic specific configuration
+ (for example the PRG_ETHERNET register range on Meson8b and newer)
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - phy-mode
+
+examples:
+ - |
+ ethmac: ethernet@c9410000 {
+ compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
+ interrupts = <8>;
+ interrupt-names = "macirq";
+ clocks = <&clk_eth>, <&clkc_fclk_div2>, <&clk_mpll2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ phy-mode = "rgmii";
+ };
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
deleted file mode 100644
index 1321bb194ed9..000000000000
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-* Amlogic Meson DWMAC Ethernet controller
-
-The device inherits all the properties of the dwmac/stmmac devices
-described in the file stmmac.txt in the current directory with the
-following changes.
-
-Required properties on all platforms:
-
-- compatible: Depending on the platform this should be one of:
- - "amlogic,meson6-dwmac"
- - "amlogic,meson8b-dwmac"
- - "amlogic,meson8m2-dwmac"
- - "amlogic,meson-gxbb-dwmac"
- - "amlogic,meson-axg-dwmac"
- Additionally "snps,dwmac" and any applicable more
- detailed version number described in net/stmmac.txt
- should be used.
-
-- reg: The first register range should be the one of the DWMAC
- controller. The second range is is for the Amlogic specific
- configuration (for example the PRG_ETHERNET register range
- on Meson8b and newer)
-
-Required properties on Meson8b, Meson8m2, GXBB and newer:
-- clock-names: Should contain the following:
- - "stmmaceth" - see stmmac.txt
- - "clkin0" - first parent clock of the internal mux
- - "clkin1" - second parent clock of the internal mux
-
-Optional properties on Meson8b, Meson8m2, GXBB and newer:
-- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided
- by this driver) in nanoseconds. Allowed values
- are: 0ns, 2ns, 4ns, 6ns.
- When phy-mode is set to "rgmii" then the TX
- delay should be explicitly configured. When
- not configured a fallback of 2ns is used.
- When the phy-mode is set to either "rgmii-id"
- or "rgmii-txid" the TX clock delay is already
- provided by the PHY. In that case this
- property should be set to 0ns (which disables
- the TX clock delay in the MAC to prevent the
- clock from going off because both PHY and MAC
- are adding a delay).
- Any configuration is ignored when the phy-mode
- is set to "rmii".
-
-Example for Meson6:
-
- ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson6-dwmac", "snps,dwmac";
- reg = <0xc9410000 0x10000
- 0xc1108108 0x4>;
- interrupts = <0 8 1>;
- interrupt-names = "macirq";
- clocks = <&clk81>;
- clock-names = "stmmaceth";
- }
-
-Example for GXBB:
- ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000>,
- <0x0 0xc8834540 0x0 0x8>;
- interrupts = <0 8 1>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
- phy-mode = "rgmii";
- };
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 4377f511a51d..c78be15704b9 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -50,6 +50,11 @@ properties:
- allwinner,sun8i-r40-emac
- allwinner,sun8i-v3s-emac
- allwinner,sun50i-a64-emac
+ - amlogic,meson6-dwmac
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
--
2.22.0
^ permalink raw reply related
* [PATCH v2 1/2] dt-bindings: net: snps,dwmac: update reg minItems maxItems
From: Neil Armstrong @ 2019-08-06 12:50 UTC (permalink / raw)
To: robh+dt
Cc: Neil Armstrong, martin.blumenstingl, devicetree, netdev,
linux-amlogic, linux-arm-kernel, linux-kernel
In-Reply-To: <20190806125041.16105-1-narmstrong@baylibre.com>
The Amlogic Meson DWMAC glue bindings needs a second reg cells for the
glue registers, thus update the reg minItems/maxItems to allow more
than a single reg cell.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 76fea2be66ac..4377f511a51d 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -61,7 +61,8 @@ properties:
- snps,dwxgmac-2.10
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
interrupts:
minItems: 1
--
2.22.0
^ permalink raw reply related
* [PATCH 1/3] net: dsa: ksz: Remove dead code and fix warnings
From: Marek Vasut @ 2019-08-06 13:06 UTC (permalink / raw)
To: netdev
Cc: Marek Vasut, Andrew Lunn, David S . Miller, Florian Fainelli,
Tristram Ha, Vivien Didelot, Woojung Huh
Remove ksz_port_cleanup(), which is unused. Add missing include
"ksz_common.h", which fixes the following warning when built with
make ... W=1
drivers/net/dsa/microchip/ksz_common.c:23:6: warning: no previous prototype for ‘...’ [-Wmissing-prototypes]
Note that the order of the headers cannot be swapped, as that would
trigger missing forward declaration errors, which would indicate the
way forward is to merge the two headers into one.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
---
drivers/net/dsa/microchip/ksz_common.c | 11 +----------
drivers/net/dsa/microchip/ksz_common.h | 1 -
2 files changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index ce20cc90f9ef..a1e6e560fde8 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -19,16 +19,7 @@
#include <net/switchdev.h>
#include "ksz_priv.h"
-
-void ksz_port_cleanup(struct ksz_device *dev, int port)
-{
- /* Common code for port cleanup. */
- mutex_lock(&dev->dev_mutex);
- dev->on_ports &= ~(1 << port);
- dev->live_ports &= ~(1 << port);
- mutex_unlock(&dev->dev_mutex);
-}
-EXPORT_SYMBOL_GPL(ksz_port_cleanup);
+#include "ksz_common.h"
void ksz_update_port_member(struct ksz_device *dev, int port)
{
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 84fed4a2578b..9f9ff0fb3b53 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -9,7 +9,6 @@
#include <linux/regmap.h>
-void ksz_port_cleanup(struct ksz_device *dev, int port);
void ksz_update_port_member(struct ksz_device *dev, int port);
void ksz_init_mib_timer(struct ksz_device *dev);
--
2.20.1
^ permalink raw reply related
* [PATCH 2/3] net: dsa: ksz: Merge ksz_priv.h into ksz_common.h
From: Marek Vasut @ 2019-08-06 13:06 UTC (permalink / raw)
To: netdev
Cc: Marek Vasut, Andrew Lunn, David S . Miller, Florian Fainelli,
Tristram Ha, Vivien Didelot, Woojung Huh
In-Reply-To: <20190806130609.29686-1-marex@denx.de>
Merge the two headers into one, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
---
drivers/net/dsa/microchip/ksz8795.c | 1 -
drivers/net/dsa/microchip/ksz8795_spi.c | 1 -
drivers/net/dsa/microchip/ksz9477.c | 1 -
drivers/net/dsa/microchip/ksz9477_spi.c | 1 -
drivers/net/dsa/microchip/ksz_common.c | 1 -
drivers/net/dsa/microchip/ksz_common.h | 144 ++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_priv.h | 156 ------------------------
7 files changed, 144 insertions(+), 161 deletions(-)
delete mode 100644 drivers/net/dsa/microchip/ksz_priv.h
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index ae80b3c6dea2..a23d3ffdf0c4 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -18,7 +18,6 @@
#include <net/dsa.h>
#include <net/switchdev.h>
-#include "ksz_priv.h"
#include "ksz_common.h"
#include "ksz8795_reg.h"
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
index 50aa0d24effb..d0f8153e86b7 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -14,7 +14,6 @@
#include <linux/regmap.h>
#include <linux/spi/spi.h>
-#include "ksz_priv.h"
#include "ksz_common.h"
#define SPI_ADDR_SHIFT 12
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index a8c97f7a79b7..187be42de5f1 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -14,7 +14,6 @@
#include <net/dsa.h>
#include <net/switchdev.h>
-#include "ksz_priv.h"
#include "ksz9477_reg.h"
#include "ksz_common.h"
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index 5a9e27b337a8..a226b389e12d 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -13,7 +13,6 @@
#include <linux/regmap.h>
#include <linux/spi/spi.h>
-#include "ksz_priv.h"
#include "ksz_common.h"
#define SPI_ADDR_SHIFT 24
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index a1e6e560fde8..b45c7b972cec 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -18,7 +18,6 @@
#include <net/dsa.h>
#include <net/switchdev.h>
-#include "ksz_priv.h"
#include "ksz_common.h"
void ksz_update_port_member(struct ksz_device *dev, int port)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 9f9ff0fb3b53..c44a8d23d973 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -7,7 +7,151 @@
#ifndef __KSZ_COMMON_H
#define __KSZ_COMMON_H
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
#include <linux/regmap.h>
+#include <net/dsa.h>
+
+struct vlan_table {
+ u32 table[3];
+};
+
+struct ksz_port_mib {
+ struct mutex cnt_mutex; /* structure access */
+ u8 cnt_ptr;
+ u64 *counters;
+};
+
+struct ksz_port {
+ u16 member;
+ u16 vid_member;
+ int stp_state;
+ struct phy_device phydev;
+
+ u32 on:1; /* port is not disabled by hardware */
+ u32 phy:1; /* port has a PHY */
+ u32 fiber:1; /* port is fiber */
+ u32 sgmii:1; /* port is SGMII */
+ u32 force:1;
+ u32 read:1; /* read MIB counters in background */
+ u32 freeze:1; /* MIB counter freeze is enabled */
+
+ struct ksz_port_mib mib;
+};
+
+struct ksz_device {
+ struct dsa_switch *ds;
+ struct ksz_platform_data *pdata;
+ const char *name;
+
+ struct mutex dev_mutex; /* device access */
+ struct mutex stats_mutex; /* status access */
+ struct mutex alu_mutex; /* ALU access */
+ struct mutex vlan_mutex; /* vlan access */
+ const struct ksz_dev_ops *dev_ops;
+
+ struct device *dev;
+ struct regmap *regmap[3];
+
+ void *priv;
+
+ struct gpio_desc *reset_gpio; /* Optional reset GPIO */
+
+ /* chip specific data */
+ u32 chip_id;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_port; /* port connected to CPU */
+ int cpu_ports; /* port bitmap can be cpu port */
+ int phy_port_cnt;
+ int port_cnt;
+ int reg_mib_cnt;
+ int mib_cnt;
+ int mib_port_cnt;
+ int last_port; /* ports after that not used */
+ phy_interface_t interface;
+ u32 regs_size;
+ bool phy_errata_9477;
+ bool synclko_125;
+
+ struct vlan_table *vlan_cache;
+
+ struct ksz_port *ports;
+ struct timer_list mib_read_timer;
+ struct work_struct mib_read;
+ unsigned long mib_read_interval;
+ u16 br_member;
+ u16 member;
+ u16 live_ports;
+ u16 on_ports; /* ports enabled by DSA */
+ u16 rx_ports;
+ u16 tx_ports;
+ u16 mirror_rx;
+ u16 mirror_tx;
+ u32 features; /* chip specific features */
+ u32 overrides; /* chip functions set by user */
+ u16 host_mask;
+ u16 port_mask;
+};
+
+struct alu_struct {
+ /* entry 1 */
+ u8 is_static:1;
+ u8 is_src_filter:1;
+ u8 is_dst_filter:1;
+ u8 prio_age:3;
+ u32 _reserv_0_1:23;
+ u8 mstp:3;
+ /* entry 2 */
+ u8 is_override:1;
+ u8 is_use_fid:1;
+ u32 _reserv_1_1:23;
+ u8 port_forward:7;
+ /* entry 3 & 4*/
+ u32 _reserv_2_1:9;
+ u8 fid:7;
+ u8 mac[ETH_ALEN];
+};
+
+struct ksz_dev_ops {
+ u32 (*get_port_addr)(int port, int offset);
+ void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
+ void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+ void (*phy_setup)(struct ksz_device *dev, int port,
+ struct phy_device *phy);
+ void (*port_cleanup)(struct ksz_device *dev, int port);
+ void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
+ void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
+ void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
+ int (*r_dyn_mac_table)(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+ u8 *fid, u8 *src_port, u8 *timestamp,
+ u16 *entries);
+ int (*r_sta_mac_table)(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu);
+ void (*w_sta_mac_table)(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu);
+ void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr,
+ u64 *cnt);
+ void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt);
+ void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
+ void (*port_init_cnt)(struct ksz_device *dev, int port);
+ int (*shutdown)(struct ksz_device *dev);
+ int (*detect)(struct ksz_device *dev);
+ int (*init)(struct ksz_device *dev);
+ void (*exit)(struct ksz_device *dev);
+};
+
+struct ksz_device *ksz_switch_alloc(struct device *base, void *priv);
+int ksz_switch_register(struct ksz_device *dev,
+ const struct ksz_dev_ops *ops);
+void ksz_switch_remove(struct ksz_device *dev);
+
+int ksz8795_switch_register(struct ksz_device *dev);
+int ksz9477_switch_register(struct ksz_device *dev);
void ksz_update_port_member(struct ksz_device *dev, int port);
void ksz_init_mib_timer(struct ksz_device *dev);
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
deleted file mode 100644
index 44c16aaf775c..000000000000
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Microchip KSZ series switch common definitions
- *
- * Copyright (C) 2017-2019 Microchip Technology Inc.
- */
-
-#ifndef __KSZ_PRIV_H
-#define __KSZ_PRIV_H
-
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/phy.h>
-#include <linux/etherdevice.h>
-#include <net/dsa.h>
-
-struct vlan_table {
- u32 table[3];
-};
-
-struct ksz_port_mib {
- struct mutex cnt_mutex; /* structure access */
- u8 cnt_ptr;
- u64 *counters;
-};
-
-struct ksz_port {
- u16 member;
- u16 vid_member;
- int stp_state;
- struct phy_device phydev;
-
- u32 on:1; /* port is not disabled by hardware */
- u32 phy:1; /* port has a PHY */
- u32 fiber:1; /* port is fiber */
- u32 sgmii:1; /* port is SGMII */
- u32 force:1;
- u32 read:1; /* read MIB counters in background */
- u32 freeze:1; /* MIB counter freeze is enabled */
-
- struct ksz_port_mib mib;
-};
-
-struct ksz_device {
- struct dsa_switch *ds;
- struct ksz_platform_data *pdata;
- const char *name;
-
- struct mutex dev_mutex; /* device access */
- struct mutex stats_mutex; /* status access */
- struct mutex alu_mutex; /* ALU access */
- struct mutex vlan_mutex; /* vlan access */
- const struct ksz_dev_ops *dev_ops;
-
- struct device *dev;
- struct regmap *regmap[3];
-
- void *priv;
-
- struct gpio_desc *reset_gpio; /* Optional reset GPIO */
-
- /* chip specific data */
- u32 chip_id;
- int num_vlans;
- int num_alus;
- int num_statics;
- int cpu_port; /* port connected to CPU */
- int cpu_ports; /* port bitmap can be cpu port */
- int phy_port_cnt;
- int port_cnt;
- int reg_mib_cnt;
- int mib_cnt;
- int mib_port_cnt;
- int last_port; /* ports after that not used */
- phy_interface_t interface;
- u32 regs_size;
- bool phy_errata_9477;
- bool synclko_125;
-
- struct vlan_table *vlan_cache;
-
- struct ksz_port *ports;
- struct timer_list mib_read_timer;
- struct work_struct mib_read;
- unsigned long mib_read_interval;
- u16 br_member;
- u16 member;
- u16 live_ports;
- u16 on_ports; /* ports enabled by DSA */
- u16 rx_ports;
- u16 tx_ports;
- u16 mirror_rx;
- u16 mirror_tx;
- u32 features; /* chip specific features */
- u32 overrides; /* chip functions set by user */
- u16 host_mask;
- u16 port_mask;
-};
-
-struct alu_struct {
- /* entry 1 */
- u8 is_static:1;
- u8 is_src_filter:1;
- u8 is_dst_filter:1;
- u8 prio_age:3;
- u32 _reserv_0_1:23;
- u8 mstp:3;
- /* entry 2 */
- u8 is_override:1;
- u8 is_use_fid:1;
- u32 _reserv_1_1:23;
- u8 port_forward:7;
- /* entry 3 & 4*/
- u32 _reserv_2_1:9;
- u8 fid:7;
- u8 mac[ETH_ALEN];
-};
-
-struct ksz_dev_ops {
- u32 (*get_port_addr)(int port, int offset);
- void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
- void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
- void (*phy_setup)(struct ksz_device *dev, int port,
- struct phy_device *phy);
- void (*port_cleanup)(struct ksz_device *dev, int port);
- void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
- void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
- void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
- int (*r_dyn_mac_table)(struct ksz_device *dev, u16 addr, u8 *mac_addr,
- u8 *fid, u8 *src_port, u8 *timestamp,
- u16 *entries);
- int (*r_sta_mac_table)(struct ksz_device *dev, u16 addr,
- struct alu_struct *alu);
- void (*w_sta_mac_table)(struct ksz_device *dev, u16 addr,
- struct alu_struct *alu);
- void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr,
- u64 *cnt);
- void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
- u64 *dropped, u64 *cnt);
- void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
- void (*port_init_cnt)(struct ksz_device *dev, int port);
- int (*shutdown)(struct ksz_device *dev);
- int (*detect)(struct ksz_device *dev);
- int (*init)(struct ksz_device *dev);
- void (*exit)(struct ksz_device *dev);
-};
-
-struct ksz_device *ksz_switch_alloc(struct device *base, void *priv);
-int ksz_switch_register(struct ksz_device *dev,
- const struct ksz_dev_ops *ops);
-void ksz_switch_remove(struct ksz_device *dev);
-
-int ksz8795_switch_register(struct ksz_device *dev);
-int ksz9477_switch_register(struct ksz_device *dev);
-
-#endif
--
2.20.1
^ permalink raw reply related
* [PATCH 3/3] net: dsa: ksz: Drop NET_DSA_TAG_KSZ9477
From: Marek Vasut @ 2019-08-06 13:06 UTC (permalink / raw)
To: netdev
Cc: Marek Vasut, Andrew Lunn, David S . Miller, Florian Fainelli,
Tristram Ha, Vivien Didelot, Woojung Huh
In-Reply-To: <20190806130609.29686-1-marex@denx.de>
This Kconfig option is unused, drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
---
drivers/net/dsa/microchip/Kconfig | 1 -
net/dsa/Kconfig | 7 -------
2 files changed, 8 deletions(-)
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 5e4f74286ea3..e1c23d1e91e6 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -5,7 +5,6 @@ config NET_DSA_MICROCHIP_KSZ_COMMON
menuconfig NET_DSA_MICROCHIP_KSZ9477
tristate "Microchip KSZ9477 series switch support"
depends on NET_DSA
- select NET_DSA_TAG_KSZ9477
select NET_DSA_MICROCHIP_KSZ_COMMON
help
This driver adds support for Microchip KSZ9477 switch chips.
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 6e942dda1bcd..2f69d4b53d46 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -84,13 +84,6 @@ config NET_DSA_TAG_KSZ
Say Y if you want to enable support for tagging frames for the
Microchip 9893 family of switches.
-config NET_DSA_TAG_KSZ9477
- tristate "Tag driver for Microchip 9477 family of switches"
- select NET_DSA_TAG_KSZ_COMMON
- help
- Say Y if you want to enable support for tagging frames for the
- Microchip 9477 family of switches.
-
config NET_DSA_TAG_QCA
tristate "Tag driver for Qualcomm Atheros QCA8K switches"
help
--
2.20.1
^ permalink raw reply related
* [PATCH net 3/3] net: stmmac: tc: Do not return a fragment entry
From: Jose Abreu @ 2019-08-06 13:16 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565097294.git.joabreu@synopsys.com>
Do not try to return a fragment entry from TC list. Otherwise we may not
clean properly allocated entries.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 58ea18af9813..37c0bc699cd9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -37,7 +37,7 @@ static struct stmmac_tc_entry *tc_find_entry(struct stmmac_priv *priv,
entry = &priv->tc_entries[i];
if (!entry->in_use && !first && free)
first = entry;
- if (entry->handle == loc && !free)
+ if ((entry->handle == loc) && !free && !entry->is_frag)
dup = entry;
}
--
2.7.4
^ permalink raw reply related
* [PATCH net 2/3] net: stmmac: Fix issues when number of Queues >= 4
From: Jose Abreu @ 2019-08-06 13:16 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565097294.git.joabreu@synopsys.com>
When queues >= 4 we use different registers but we were not subtracting
the offset of 4. Fix this.
Found out by Coverity.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 4 ++++
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 01c2e2d83e76..fc9954e4a772 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -85,6 +85,8 @@ static void dwmac4_rx_queue_priority(struct mac_device_info *hw,
u32 value;
base_register = (queue < 4) ? GMAC_RXQ_CTRL2 : GMAC_RXQ_CTRL3;
+ if (queue >= 4)
+ queue -= 4;
value = readl(ioaddr + base_register);
@@ -102,6 +104,8 @@ static void dwmac4_tx_queue_priority(struct mac_device_info *hw,
u32 value;
base_register = (queue < 4) ? GMAC_TXQ_PRTY_MAP0 : GMAC_TXQ_PRTY_MAP1;
+ if (queue >= 4)
+ queue -= 4;
value = readl(ioaddr + base_register);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 03a6a59650ca..85c68b7ee8c6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -108,6 +108,8 @@ static void dwxgmac2_rx_queue_prio(struct mac_device_info *hw, u32 prio,
u32 value, reg;
reg = (queue < 4) ? XGMAC_RXQ_CTRL2 : XGMAC_RXQ_CTRL3;
+ if (queue >= 4)
+ queue -= 4;
value = readl(ioaddr + reg);
value &= ~XGMAC_PSRQ(queue);
@@ -171,6 +173,8 @@ static void dwxgmac2_map_mtl_to_dma(struct mac_device_info *hw, u32 queue,
u32 value, reg;
reg = (queue < 4) ? XGMAC_MTL_RXQ_DMA_MAP0 : XGMAC_MTL_RXQ_DMA_MAP1;
+ if (queue >= 4)
+ queue -= 4;
value = readl(ioaddr + reg);
value &= ~XGMAC_QxMDMACH(queue);
--
2.7.4
^ permalink raw reply related
* [PATCH net 1/3] net: stmmac: xgmac: Fix XGMAC selftests
From: Jose Abreu @ 2019-08-06 13:16 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565097294.git.joabreu@synopsys.com>
Fixup the XGMAC selftests by correctly finishing the implementation of
set_filter callback.
Result:
$ ethtool -t enp4s0
The test result is PASS
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters -95
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 0
7. MC Filter 0
8. UC Filter 0
9. Flow Control 0
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 7 +-
.../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 83 +++++++++++++++++++---
2 files changed, 79 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 7f86dffb264d..3174b701aa90 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -44,11 +44,13 @@
#define XGMAC_CORE_INIT_RX 0
#define XGMAC_PACKET_FILTER 0x00000008
#define XGMAC_FILTER_RA BIT(31)
+#define XGMAC_FILTER_HPF BIT(10)
#define XGMAC_FILTER_PCF BIT(7)
#define XGMAC_FILTER_PM BIT(4)
#define XGMAC_FILTER_HMC BIT(2)
#define XGMAC_FILTER_PR BIT(0)
#define XGMAC_HASH_TABLE(x) (0x00000010 + (x) * 4)
+#define XGMAC_MAX_HASH_TABLE 8
#define XGMAC_RXQ_CTRL0 0x000000a0
#define XGMAC_RXQEN(x) GENMASK((x) * 2 + 1, (x) * 2)
#define XGMAC_RXQEN_SHIFT(x) ((x) * 2)
@@ -99,11 +101,12 @@
#define XGMAC_MDIO_ADDR 0x00000200
#define XGMAC_MDIO_DATA 0x00000204
#define XGMAC_MDIO_C22P 0x00000220
-#define XGMAC_ADDR0_HIGH 0x00000300
+#define XGMAC_ADDRx_HIGH(x) (0x00000300 + (x) * 0x8)
+#define XGMAC_ADDR_MAX 32
#define XGMAC_AE BIT(31)
#define XGMAC_DCS GENMASK(19, 16)
#define XGMAC_DCS_SHIFT 16
-#define XGMAC_ADDR0_LOW 0x00000304
+#define XGMAC_ADDRx_LOW(x) (0x00000304 + (x) * 0x8)
#define XGMAC_ARP_ADDR 0x00000c10
#define XGMAC_TIMESTAMP_STATUS 0x00000d20
#define XGMAC_TXTSC BIT(15)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 0a32c96a7854..03a6a59650ca 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -4,6 +4,8 @@
* stmmac XGMAC support.
*/
+#include <linux/bitrev.h>
+#include <linux/crc32.h>
#include "stmmac.h"
#include "dwxgmac2.h"
@@ -278,10 +280,10 @@ static void dwxgmac2_set_umac_addr(struct mac_device_info *hw,
u32 value;
value = (addr[5] << 8) | addr[4];
- writel(value | XGMAC_AE, ioaddr + XGMAC_ADDR0_HIGH);
+ writel(value | XGMAC_AE, ioaddr + XGMAC_ADDRx_HIGH(reg_n));
value = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
- writel(value, ioaddr + XGMAC_ADDR0_LOW);
+ writel(value, ioaddr + XGMAC_ADDRx_LOW(reg_n));
}
static void dwxgmac2_get_umac_addr(struct mac_device_info *hw,
@@ -291,8 +293,8 @@ static void dwxgmac2_get_umac_addr(struct mac_device_info *hw,
u32 hi_addr, lo_addr;
/* Read the MAC address from the hardware */
- hi_addr = readl(ioaddr + XGMAC_ADDR0_HIGH);
- lo_addr = readl(ioaddr + XGMAC_ADDR0_LOW);
+ hi_addr = readl(ioaddr + XGMAC_ADDRx_HIGH(reg_n));
+ lo_addr = readl(ioaddr + XGMAC_ADDRx_LOW(reg_n));
/* Extract the MAC address from the high and low words */
addr[0] = lo_addr & 0xff;
@@ -303,19 +305,82 @@ static void dwxgmac2_get_umac_addr(struct mac_device_info *hw,
addr[5] = (hi_addr >> 8) & 0xff;
}
+static void dwxgmac2_set_mchash(void __iomem *ioaddr, u32 *mcfilterbits,
+ int mcbitslog2)
+{
+ int numhashregs, regs;
+
+ switch (mcbitslog2) {
+ case 6:
+ numhashregs = 2;
+ break;
+ case 7:
+ numhashregs = 4;
+ break;
+ case 8:
+ numhashregs = 8;
+ break;
+ default:
+ return;
+ }
+
+ for (regs = 0; regs < numhashregs; regs++)
+ writel(mcfilterbits[regs], ioaddr + XGMAC_HASH_TABLE(regs));
+}
+
static void dwxgmac2_set_filter(struct mac_device_info *hw,
struct net_device *dev)
{
void __iomem *ioaddr = (void __iomem *)dev->base_addr;
- u32 value = XGMAC_FILTER_RA;
+ u32 value = readl(ioaddr + XGMAC_PACKET_FILTER);
+ int mcbitslog2 = hw->mcast_bits_log2;
+ u32 mc_filter[8];
+ int i;
+
+ value &= ~(XGMAC_FILTER_PR | XGMAC_FILTER_HMC | XGMAC_FILTER_PM);
+ value |= XGMAC_FILTER_HPF;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
if (dev->flags & IFF_PROMISC) {
- value |= XGMAC_FILTER_PR | XGMAC_FILTER_PCF;
+ value |= XGMAC_FILTER_PR;
+ value |= XGMAC_FILTER_PCF;
} else if ((dev->flags & IFF_ALLMULTI) ||
- (netdev_mc_count(dev) > HASH_TABLE_SIZE)) {
+ (netdev_mc_count(dev) > hw->multicast_filter_bins)) {
value |= XGMAC_FILTER_PM;
- writel(~0x0, ioaddr + XGMAC_HASH_TABLE(0));
- writel(~0x0, ioaddr + XGMAC_HASH_TABLE(1));
+
+ for (i = 0; i < XGMAC_MAX_HASH_TABLE; i++)
+ writel(~0x0, ioaddr + XGMAC_HASH_TABLE(i));
+ } else if (!netdev_mc_empty(dev)) {
+ struct netdev_hw_addr *ha;
+
+ value |= XGMAC_FILTER_HMC;
+
+ netdev_for_each_mc_addr(ha, dev) {
+ int nr = (bitrev32(~crc32_le(~0, ha->addr, 6)) >>
+ (32 - mcbitslog2));
+ mc_filter[nr >> 5] |= (1 << (nr & 0x1F));
+ }
+ }
+
+ dwxgmac2_set_mchash(ioaddr, mc_filter, mcbitslog2);
+
+ /* Handle multiple unicast addresses */
+ if (netdev_uc_count(dev) > XGMAC_ADDR_MAX) {
+ value |= XGMAC_FILTER_PR;
+ } else {
+ struct netdev_hw_addr *ha;
+ int reg = 1;
+
+ netdev_for_each_uc_addr(ha, dev) {
+ dwxgmac2_set_umac_addr(hw, ha->addr, reg);
+ reg++;
+ }
+
+ for ( ; reg < XGMAC_ADDR_MAX; reg++) {
+ writel(0, ioaddr + XGMAC_ADDRx_HIGH(reg));
+ writel(0, ioaddr + XGMAC_ADDRx_LOW(reg));
+ }
}
writel(value, ioaddr + XGMAC_PACKET_FILTER);
--
2.7.4
^ permalink raw reply related
* [PATCH net 0/3] net: stmmac: Fixes for -net
From: Jose Abreu @ 2019-08-06 13:16 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
Couple of fixes for -net. More info in commit log.
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
Jose Abreu (3):
net: stmmac: xgmac: Fix XGMAC selftests
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: tc: Do not return a fragment entry
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 4 +
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 7 +-
.../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 87 +++++++++++++++++++---
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 +-
4 files changed, 88 insertions(+), 12 deletions(-)
--
2.7.4
^ permalink raw reply
* Re: [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
From: Avi Fishman @ 2019-08-06 13:19 UTC (permalink / raw)
To: Willem de Bruijn
Cc: Patrick Venture, Nancy Yuen, Benjamin Fair, David Miller,
Rob Herring, Mark Rutland, Greg Kroah-Hartman, Tomer Maimon,
Tali Perry, OpenBMC Maillist, Network Development, devicetree,
linux-kernel, Thomas Gleixner
In-Reply-To: <CA+FuTSd89gJBX-zaZTzgNxpqtR_MvVfMf=6hdRe5+1MPRszw8g@mail.gmail.com>
Thanks for the input Willem,
Before I will submit a new version please help me with some questions:
On Thu, Aug 1, 2019 at 8:26 PM Willem de Bruijn
<willemdebruijn.kernel@gmail.com> wrote:
>
> On Thu, Aug 1, 2019 at 3:28 AM Avi Fishman <avifishman70@gmail.com> wrote:
> >
> > EMC Ethernet Media Access Controller supports 10/100 Mbps and
> > RMII.
> > This driver has been working on Nuvoton BMC NPCM7xx.
> >
> > Signed-off-by: Avi Fishman <avifishman70@gmail.com>
>
>
>
> > +/* global setting for driver */
> > +#define RX_QUEUE_LEN 128
> > +#define TX_QUEUE_LEN 64
> > +#define MAX_RBUFF_SZ 0x600
> > +#define MAX_TBUFF_SZ 0x600
> > +#define TX_TIMEOUT 50
> > +#define DELAY 1000
> > +#define CAM0 0x0
> > +#define RX_POLL_SIZE 16
> > +
> > +#ifdef CONFIG_VLAN_8021Q
> > +#define IS_VLAN 1
> > +#else
> > +#define IS_VLAN 0
> > +#endif
> > +
> > +#define MAX_PACKET_SIZE (1514 + (IS_VLAN * 4))
>
> 1514 -> ETH_FRAME_LEN
>
> 4 -> VLAN_HLEN
OK
>
> Does this device support stacked VLAN?
I am not familiar with stacked VLAN.
Our HW for sure there is no support. can the SW stack handle it for me?
Does it mean that the packets can be larger?
>
> Is this really the device maximum?
The device can support upto 64KB, but of course I will not allocate
for each RX data such a big buffer.
Can I know what is the maximum value the network stack may request? I
saw many driver allocating 1536 for each packet.
>
> > +#define MAX_PACKET_SIZE_W_CRC (MAX_PACKET_SIZE + 4) /* 1518 */
>
> 4 -> ETH_FCS_LEN
OK
>
> > +#if defined CONFIG_NPCM7XX_EMC_ETH_DEBUG || defined CONFIG_DEBUG_FS
> > +#define REG_PRINT(reg_name) {t = scnprintf(next, size, "%-10s = %08X\n", \
> > + #reg_name, readl(ether->reg + (reg_name))); size -= t; next += t; }
> > +#define DUMP_PRINT(f, x...) {t = scnprintf(next, size, f, ## x); size -= t; \
> > + next += t; }
> > +
> > +static int npcm7xx_info_dump(char *buf, int count, struct net_device *netdev)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct npcm7xx_txbd *txbd;
> > + struct npcm7xx_rxbd *rxbd;
> > + unsigned long flags;
> > + unsigned int i, cur, txd_offset, rxd_offset;
> > + char *next = buf;
> > + unsigned int size = count;
> > + int t;
> > + int is_locked = spin_is_locked(ðer->lock);
> > +
> > + if (!is_locked)
> > + spin_lock_irqsave(ðer->lock, flags);
> > +
> > + /* ------basic driver information ---- */
> > + DUMP_PRINT("NPCM7XX EMC %s driver version: %s\n", netdev->name,
> > + DRV_MODULE_VERSION);
> > +
> > + REG_PRINT(REG_CAMCMR);
> > + REG_PRINT(REG_CAMEN);
> > + REG_PRINT(REG_CAMM_BASE);
> > + REG_PRINT(REG_CAML_BASE);
> > + REG_PRINT(REG_TXDLSA);
> > + REG_PRINT(REG_RXDLSA);
> > + REG_PRINT(REG_MCMDR);
> > + REG_PRINT(REG_MIID);
> > + REG_PRINT(REG_MIIDA);
> > + REG_PRINT(REG_FFTCR);
> > + REG_PRINT(REG_TSDR);
> > + REG_PRINT(REG_RSDR);
> > + REG_PRINT(REG_DMARFC);
> > + REG_PRINT(REG_MIEN);
> > + REG_PRINT(REG_MISTA);
> > + REG_PRINT(REG_MGSTA);
> > + REG_PRINT(REG_MPCNT);
> > + writel(0x7FFF, (ether->reg + REG_MPCNT));
> > + REG_PRINT(REG_MRPC);
> > + REG_PRINT(REG_MRPCC);
> > + REG_PRINT(REG_MREPC);
> > + REG_PRINT(REG_DMARFS);
> > + REG_PRINT(REG_CTXDSA);
> > + REG_PRINT(REG_CTXBSA);
> > + REG_PRINT(REG_CRXDSA);
> > + REG_PRINT(REG_CRXBSA);
> > + REG_PRINT(REG_RXFSM);
> > + REG_PRINT(REG_TXFSM);
> > + REG_PRINT(REG_FSM0);
> > + REG_PRINT(REG_FSM1);
> > + REG_PRINT(REG_DCR);
> > + REG_PRINT(REG_DMMIR);
> > + REG_PRINT(REG_BISTR);
> > + DUMP_PRINT("\n");
> > +
> > + DUMP_PRINT("netif_queue %s\n\n", netif_queue_stopped(netdev) ?
> > + "Stopped" : "Running");
> > + if (ether->rdesc)
> > + DUMP_PRINT("napi is %s\n\n", test_bit(NAPI_STATE_SCHED,
> > + ðer->napi.state) ?
> > + "scheduled" :
> > + "not scheduled");
> > +
> > + txd_offset = (readl((ether->reg + REG_CTXDSA)) -
> > + readl((ether->reg + REG_TXDLSA))) /
> > + sizeof(struct npcm7xx_txbd);
> > + DUMP_PRINT("TXD offset %6d\n", txd_offset);
> > + DUMP_PRINT("cur_tx %6d\n", ether->cur_tx);
> > + DUMP_PRINT("finish_tx %6d\n", ether->finish_tx);
> > + DUMP_PRINT("pending_tx %6d\n", ether->pending_tx);
> > + /* debug counters */
> > + DUMP_PRINT("tx_tdu %6d\n", ether->tx_tdu);
> > + ether->tx_tdu = 0;
> > + DUMP_PRINT("tx_tdu_i %6d\n", ether->tx_tdu_i);
> > + ether->tx_tdu_i = 0;
> > + DUMP_PRINT("tx_cp_i %6d\n", ether->tx_cp_i);
> > + ether->tx_cp_i = 0;
> > + DUMP_PRINT("tx_int_count %6d\n", ether->tx_int_count);
> > + ether->tx_int_count = 0;
> > + DUMP_PRINT("count_xmit tx %6d\n", ether->count_xmit);
> > + ether->count_xmit = 0;
> > + DUMP_PRINT("count_finish %6d\n", ether->count_finish);
> > + ether->count_finish = 0;
> > + DUMP_PRINT("\n");
> > +
> > + rxd_offset = (readl((ether->reg + REG_CRXDSA)) -
> > + readl((ether->reg + REG_RXDLSA)))
> > + / sizeof(struct npcm7xx_txbd);
> > + DUMP_PRINT("RXD offset %6d\n", rxd_offset);
> > + DUMP_PRINT("cur_rx %6d\n", ether->cur_rx);
> > + DUMP_PRINT("rx_err %6d\n", ether->rx_err);
> > + ether->rx_err = 0;
> > + DUMP_PRINT("rx_berr %6d\n", ether->rx_berr);
> > + ether->rx_berr = 0;
> > + DUMP_PRINT("rx_stuck %6d\n", ether->rx_stuck);
> > + ether->rx_stuck = 0;
> > + DUMP_PRINT("rdu %6d\n", ether->rdu);
> > + ether->rdu = 0;
> > + DUMP_PRINT("rxov rx %6d\n", ether->rxov);
> > + ether->rxov = 0;
> > + /* debug counters */
> > + DUMP_PRINT("rx_int_count %6d\n", ether->rx_int_count);
> > + ether->rx_int_count = 0;
> > + DUMP_PRINT("rx_err_count %6d\n", ether->rx_err_count);
> > + ether->rx_err_count = 0;
>
> Basic counters like tx_packets and rx_errors are probably better
> exported regardless of debug level as net_device_stats. And then don't
> need to be copied in debug output.
They are also exported there, see below ether->stats.tx_packets++; and
ether->stats.rx_errors++;
those are different counters for debug since we had HW issues that we
needed to workaround and might need them for future use.
Currently the driver is stable on millions of parts in the field.
>
> Less standard counters like tx interrupt count are probably better
> candidates for ethtool -S.
I don't have support for ethtool.
is it a must? it is quite some work and this driver is already in the
field for quite some years.
>
> > +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> > +static void npcm7xx_info_print(struct net_device *netdev)
> > +{
> > + char *emc_dump_buf;
> > + int count;
> > + struct npcm7xx_ether *ether;
> > + struct platform_device *pdev;
> > + char c;
> > + char *tmp_buf;
> > + const size_t print_size = 5 * PAGE_SIZE;
I will change print_size to 0x5000 since PAGE_SIZE is not a fixed
value on all arch.
> > +
> > + ether = netdev_priv(netdev);
> > + pdev = ether->pdev;
> > +
> > + emc_dump_buf = kmalloc(print_size, GFP_KERNEL);
> > + if (!emc_dump_buf)
> > + return;
> > +
> > + tmp_buf = emc_dump_buf;
> > + count = ether->stats.rx_errors++;(emc_dump_buf, print_size, netdev);
> > + while (count > 512) {
> > + c = tmp_buf[512];
> > + tmp_buf[512] = 0;
> > + dev_info(&pdev->dev, "%s", tmp_buf);
> > + tmp_buf += 512;
> > + tmp_buf[0] = c;
> > + count -= 512;
>
> Missing closing parenthesis.
WOW! good catch, before submitting I made few change due to
checkpatch.pl and didn't compile with CONFIG_NPCM7XX_EMC_ETH_DEBUG
>
> Also, why this buffering to printk?
I prepare the buffer in advance for real-time reasons because of the
lock in order to get a correct snapshot of the registers.
The buffer is big and I saw that printk has limited length so I split it.
>
> > +static void npcm7xx_write_cam(struct net_device *netdev,
> > + unsigned int x, unsigned char *pval)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + __le32 msw, lsw;
> > +
> > + msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
> > +
> > + lsw = (pval[4] << 24) | (pval[5] << 16);
>
> Does __le32 plus this explicit shifting define host endianness? Better
> to keep independent?
OK
>
> > +
> > + writel(lsw, (ether->reg + REG_CAML_BASE) + x * CAM_ENTRY_SIZE);
> > + writel(msw, (ether->reg + REG_CAMM_BASE) + x * CAM_ENTRY_SIZE);
> > + dev_dbg(ðer->pdev->dev,
> > + "REG_CAML_BASE = 0x%08X REG_CAMM_BASE = 0x%08X", lsw, msw);
> > +}
> > +
> > +static struct sk_buff *get_new_skb(struct net_device *netdev, u32 i)
> > +{
> > + __le32 buffer;
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct sk_buff *skb = netdev_alloc_skb(netdev,
> > + roundup(MAX_PACKET_SIZE_W_CRC, 4));
> > +
> > + if (unlikely(!skb)) {
> > + if (net_ratelimit())
> > + netdev_warn(netdev, "failed to allocate rx skb\n");
>
> can use net_warn_ratelimited (here and elsewhere)
should I replace every netdev_warn/err/info with net_warn/err/inf_ratelimited?
I saw in drivers that are using net_warn_ratelimited, that many time
uses also netdev_warn/err/info
>
> > + buffer = ether->rx_scratch_dma;
> > + } else {
> > + /* Do not unmark the following skb_reserve() Receive Buffer
> > + * Starting Address must be aligned to 4 bytes and the following
> > + * line if unmarked will make it align to 2 and this likely will
> > + * hult the RX and crash the linux
>
> halt?
will fix typo.
>
> > + * skb_reserve(skb, NET_IP_ALIGN);
> > + */
> > + skb->dev = netdev;
> > + buffer = dma_map_single(&netdev->dev,
> > + skb->data,
> > + roundup(MAX_PACKET_SIZE_W_CRC, 4),
> > + DMA_FROM_DEVICE);
> > + if (unlikely(dma_mapping_error(&netdev->dev, buffer))) {
> > + if (net_ratelimit())
> > + netdev_err(netdev, "failed to map rx page\n");
> > + dev_kfree_skb_any(skb);
> > + buffer = ether->rx_scratch_dma;
> > + skb = NULL;
> > + }
> > + }
> > + ether->rx_skb[i] = skb;
> > + ether->rdesc[i].buffer = buffer;
> > +
> > + return skb;
> > +}
> > +
>
> > +static int npcm7xx_ether_close(struct net_device *netdev)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > +
> > + npcm7xx_return_default_idle(netdev);
> > +
> > + if (ether->phy_dev)
> > + phy_stop(ether->phy_dev);
> > + else if (ether->use_ncsi)
> > + ncsi_stop_dev(ether->ncsidev);
> > +
> > + msleep(20);
> > +
> > + free_irq(ether->txirq, netdev);
> > + free_irq(ether->rxirq, netdev);
> > +
> > + netif_stop_queue(netdev);
> > + napi_disable(ðer->napi);
>
> Cleanup state in reverse of allocation.
OK
>
> > +static int npcm7xx_ether_start_xmit(struct sk_buff *skb, struct net_device *netdev)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct npcm7xx_txbd *txbd;
> > + unsigned long flags;
> > +
> > + ether->count_xmit++;
> > +
> > + /* Insert new buffer */
> > + txbd = (ether->tdesc + ether->cur_tx);
> > + txbd->buffer = dma_map_single(&netdev->dev, skb->data, skb->len,
> > + DMA_TO_DEVICE);
> > + ether->tx_skb[ether->cur_tx] = skb;
> > + if (skb->len > MAX_PACKET_SIZE)
> > + dev_err(ðer->pdev->dev,
> > + "skb->len (= %d) > MAX_PACKET_SIZE (= %d)\n",
> > + skb->len, MAX_PACKET_SIZE);
>
> > + txbd->sl = skb->len > MAX_PACKET_SIZE ? MAX_PACKET_SIZE : skb->len;
>
> Check for errors before mapping to device, and drop packet? Probably
> don't want to output truncated packets.
>
> Also rate limit such messages.
OK
>
> > + dma_wmb();
> > +
> > + txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE;
> > +
> > + /* make sure that data is in memory before we trigger TX */
> > + wmb();
> > +
> > + /* trigger TX */
> > + writel(ENSTART, (ether->reg + REG_TSDR));
> > +
> > + if (++ether->cur_tx >= TX_QUEUE_LEN)
> > + ether->cur_tx = 0;
> > +
> > + spin_lock_irqsave(ðer->lock, flags);
> > + ether->pending_tx++;
> > +
> > + /* sometimes we miss the tx interrupt due to HW issue, so NAPI will not
> > + * clean the pending tx, so we clean it also here
> > + */
> > + npcm7xx_clean_tx(netdev, true);
> > +
> > + if (ether->pending_tx >= TX_QUEUE_LEN - 1) {
> > + __le32 reg_mien;
> > + unsigned int index_to_wake = ether->cur_tx +
> > + ((TX_QUEUE_LEN * 3) / 4);
> > +
> > + if (index_to_wake >= TX_QUEUE_LEN)
> > + index_to_wake -= TX_QUEUE_LEN;
> > +
> > + txbd = (ether->tdesc + index_to_wake);
> > + txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
> > +
> > + /* make sure that data is in memory before we trigger TX */
> > + wmb();
> > +
> > + /* Clear TDU interrupt */
> > + writel(MISTA_TDU, (ether->reg + REG_MISTA));
> > +
> > + /* due to HW issue somtimes, we miss the TX interrupt we just
>
> somtimes -> sometimes
OK
>
> > + * set (MACTXINTEN), so we also set TDU for Transmit
> > + * Descriptor Unavailable interrupt
> > + */
> > + reg_mien = readl((ether->reg + REG_MIEN));
> > + if (reg_mien != 0)
> > + /* Enable TDU interrupt */
> > + writel(reg_mien | ENTDU, (ether->reg + REG_MIEN));
> > +
> > + ether->tx_tdu++;
> > + netif_stop_queue(netdev);
> > + }
> > +
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static irqreturn_t npcm7xx_tx_interrupt(int irq, void *dev_id)
> > +{
> > + struct npcm7xx_ether *ether;
> > + struct platform_device *pdev;
> > + struct net_device *netdev;
> > + __le32 status;
> > + unsigned long flags;
> > +
> > + netdev = dev_id;
> > + ether = netdev_priv(netdev);
> > + pdev = ether->pdev;
> > +
> > + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF0000);
> > +
> > + ether->tx_int_count++;
> > +
> > + if (status & MISTA_EXDEF)
> > + dev_err(&pdev->dev, "emc defer exceed interrupt status=0x%08X\n"
> > + , status);
> > + else if (status & MISTA_TXBERR) {
> > + dev_err(&pdev->dev, "emc bus error interrupt status=0x%08X\n",
> > + status);
> > +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> > + npcm7xx_info_print(netdev);
> > +#endif
> > + spin_lock_irqsave(ðer->lock, flags);
>
> irqsave in hard interrupt context?
I need to protect my REG_MIEN register that is changed in other places.
I think that spin_lock_irqsave() is relevant when working in SMP,
since other CPU may still be running.
Isn't it?
>
> > + writel(0, (ether->reg + REG_MIEN)); /* disable any interrupt */
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > + ether->need_reset = 1;
> > + } else if (status & ~(MISTA_TXINTR | MISTA_TXCP | MISTA_TDU))
> > + dev_err(&pdev->dev, "emc other error interrupt status=0x%08X\n",
> > + status);
> > +
> > + /* if we got MISTA_TXCP | MISTA_TDU remove those interrupt and call napi */
>
> The goal of napi is to keep interrupts disabled until napi completes.
We have a HW issue that because of it I still enabled TX complete interrupt,
I will see if I can disable all interrupts and only leave the error interrupts
>
> > + if (status & (MISTA_TXCP | MISTA_TDU) &
> > + readl((ether->reg + REG_MIEN))) {
> > + __le32 reg_mien;
> > +
> > + spin_lock_irqsave(ðer->lock, flags);
> > + reg_mien = readl((ether->reg + REG_MIEN));
> > + if (reg_mien & ENTDU)
> > + /* Disable TDU interrupt */
> > + writel(reg_mien & (~ENTDU), (ether->reg + REG_MIEN));
> > +
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > +
> > + if (status & MISTA_TXCP)
> > + ether->tx_cp_i++;
> > + if (status & MISTA_TDU)
> > + ether->tx_tdu_i++;
> > + } else {
> > + dev_dbg(&pdev->dev, "status=0x%08X\n", status);
> > + }
> > +
> > + napi_schedule(ðer->napi);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t npcm7xx_rx_interrupt(int irq, void *dev_id)
> > +{
> > + struct net_device *netdev = (struct net_device *)dev_id;
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct platform_device *pdev = ether->pdev;
> > + __le32 status;
> > + unsigned long flags;
> > + unsigned int any_err = 0;
> > + __le32 rxfsm;
> > +
> > + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF);
>
> Same here
in non error case I do leave only the error interrupts and schedule napi.
>
> > +static int npcm7xx_poll(struct napi_struct *napi, int budget)
> > +{
> > + struct npcm7xx_ether *ether =
> > + container_of(napi, struct npcm7xx_ether, napi);
> > + struct npcm7xx_rxbd *rxbd;
> > + struct net_device *netdev = ether->netdev;
> > + struct platform_device *pdev = ether->pdev;
> > + struct sk_buff *s;
> > + unsigned int length;
> > + __le32 status;
> > + unsigned long flags;
> > + int rx_cnt = 0;
> > + int complete = 0;
> > + unsigned int rx_offset = (readl((ether->reg + REG_CRXDSA)) -
> > + ether->start_rx_ptr) /
> > + sizeof(struct npcm7xx_txbd);
> > + unsigned int local_count = (rx_offset >= ether->cur_rx) ?
> > + rx_offset - ether->cur_rx : rx_offset +
> > + RX_QUEUE_LEN - ether->cur_rx;
> > +
> > + if (local_count > ether->max_waiting_rx)
> > + ether->max_waiting_rx = local_count;
> > +
> > + if (local_count > (4 * RX_POLL_SIZE))
> > + /* we are porbably in a storm of short packets and we don't
>
> porbably - probably
OK
>
> > + * want to get into RDU since short packets in RDU cause
> > + * many RXOV which may cause EMC halt, so we filter out all
> > + * coming packets
> > + */
> > + writel(0, (ether->reg + REG_CAMCMR));
> > +
> > + if (local_count <= budget)
> > + /* we can restore accepting of packets */
> > + writel(ether->camcmr, (ether->reg + REG_CAMCMR));
> > +
> > + spin_lock_irqsave(ðer->lock, flags);
> > + npcm7xx_clean_tx(netdev, false);
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > +
> > + rxbd = (ether->rdesc + ether->cur_rx);
> > +
> > + while (rx_cnt < budget) {
> > + status = rxbd->sl;
> > + if ((status & RX_OWN_DMA) == RX_OWN_DMA) {
> > + complete = 1;
> > + break;
> > + }
> > + /* for debug puposes we save the previous value */
>
> puposes -> purposes
OK
>
> > + rxbd->reserved = status;
> > + s = ether->rx_skb[ether->cur_rx];
> > + length = status & 0xFFFF;
> > +
> > + /* If VLAN is not supporte RXDS_PTLE (packet too long) is also
>
> supporte -> supported (stopping pointing out typos after this).
OK will review rest
>
> > +static const struct net_device_ops npcm7xx_ether_netdev_ops = {
> > + .ndo_open = npcm7xx_ether_open,
> > + .ndo_stop = npcm7xx_ether_close,
> > + .ndo_start_xmit = npcm7xx_ether_start_xmit,
> > + .ndo_get_stats = npcm7xx_ether_stats,
> > + .ndo_set_rx_mode = npcm7xx_ether_set_rx_mode,
> > + .ndo_set_mac_address = npcm7xx_set_mac_address,
> > + .ndo_do_ioctl = npcm7xx_ether_ioctl,
> > + .ndo_validate_addr = eth_validate_addr,
> > + .ndo_change_mtu = eth_change_mtu,
>
> This is marked as deprecated. Also in light of the hardcoded
> MAX_PACKET_SIZE, probably want to set dev->max_mtu.
can I just not set .ndo_change_mtu? or I must add my own implementation?
setting of dev->max_mtu, can be done in probe, yes?
BTW, I see that currently the mtu is 1500 but I do get transactions
with len of 1514 (I didn't compile with VLAN)
>
> > +static int npcm7xx_ether_probe(struct platform_device *pdev)
> > +{
> > + struct npcm7xx_ether *ether;
> > + struct net_device *netdev;
> > + int error;
> > +
> > + struct clk *emc_clk = NULL;
> > + struct device_node *np = pdev->dev.of_node;
> > +
> > + pdev->id = of_alias_get_id(np, "ethernet");
> > + if (pdev->id < 0)
> > + pdev->id = 0;
> > +
> > + emc_clk = devm_clk_get(&pdev->dev, NULL);
> > +
> > + if (IS_ERR(emc_clk))
> > + return PTR_ERR(emc_clk);
> > +
> > + /* Enable Clock */
> > + clk_prepare_enable(emc_clk);
> > +
> > + error = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > + if (error)
> > + return -ENODEV;
> > +
> > + netdev = alloc_etherdev(sizeof(struct npcm7xx_ether));
> > + if (!netdev)
> > + return -ENOMEM;
> > +
> > + ether = netdev_priv(netdev);
> > +
> > + ether->reset = devm_reset_control_get(&pdev->dev, NULL);
> > + if (IS_ERR(ether->reset))
> > + return PTR_ERR(ether->reset);
>
> Memory leak on error path
>
> Also missing netif_napi_del in npcm7xx_ether_remove?
added
--
Regards,
Avi
^ permalink raw reply
* [PATCH net-next 2/6] drop_monitor: Rename and document scope of mutex
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
In-Reply-To: <20190806131956.26168-1-idosch@idosch.org>
From: Ido Schimmel <idosch@mellanox.com>
The 'trace_state_mutex' does not only protect the global 'trace_state'
variable, but also the global 'hw_stats_list'.
Subsequent patches are going add more operations from user space to
drop_monitor and these all need to be mutually exclusive.
Rename 'trace_state_mutex' to the more fitting 'net_dm_mutex' name and
document its scope.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
net/core/drop_monitor.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index dcb4d2aeb2a8..000ec8b66d1e 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -43,7 +43,13 @@
* netlink alerts
*/
static int trace_state = TRACE_OFF;
-static DEFINE_MUTEX(trace_state_mutex);
+
+/* net_dm_mutex
+ *
+ * An overall lock guarding every operation coming from userspace.
+ * It also guards the global 'hw_stats_list' list.
+ */
+static DEFINE_MUTEX(net_dm_mutex);
struct per_cpu_dm_data {
spinlock_t lock;
@@ -241,7 +247,7 @@ static int set_all_monitor_traces(int state)
struct dm_hw_stat_delta *new_stat = NULL;
struct dm_hw_stat_delta *temp;
- mutex_lock(&trace_state_mutex);
+ mutex_lock(&net_dm_mutex);
if (state == trace_state) {
rc = -EAGAIN;
@@ -289,7 +295,7 @@ static int set_all_monitor_traces(int state)
rc = -EINPROGRESS;
out_unlock:
- mutex_unlock(&trace_state_mutex);
+ mutex_unlock(&net_dm_mutex);
return rc;
}
@@ -330,12 +336,12 @@ static int dropmon_net_event(struct notifier_block *ev_block,
new_stat->dev = dev;
new_stat->last_rx = jiffies;
- mutex_lock(&trace_state_mutex);
+ mutex_lock(&net_dm_mutex);
list_add_rcu(&new_stat->list, &hw_stats_list);
- mutex_unlock(&trace_state_mutex);
+ mutex_unlock(&net_dm_mutex);
break;
case NETDEV_UNREGISTER:
- mutex_lock(&trace_state_mutex);
+ mutex_lock(&net_dm_mutex);
list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) {
if (new_stat->dev == dev) {
new_stat->dev = NULL;
@@ -346,7 +352,7 @@ static int dropmon_net_event(struct notifier_block *ev_block,
}
}
}
- mutex_unlock(&trace_state_mutex);
+ mutex_unlock(&net_dm_mutex);
break;
}
out:
--
2.21.0
^ permalink raw reply related
* [PATCH net-next 0/6] drop_monitor: Various improvements and cleanups
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
From: Ido Schimmel <idosch@mellanox.com>
This patchset performs various improvements and cleanups in drop monitor
with no functional changes intended. There are no changes in these
patches relative to the RFC I sent two weeks ago [1].
A followup patchset will extend drop monitor with a packet alert mode in
which the dropped packet is notified to user space instead of just a
summary of recent drops. Subsequent patchsets will add the ability to
monitor hardware originated drops via drop monitor.
[1] https://patchwork.ozlabs.org/cover/1135226/
Ido Schimmel (6):
drop_monitor: Use correct error code
drop_monitor: Rename and document scope of mutex
drop_monitor: Document scope of spinlock
drop_monitor: Avoid multiple blank lines
drop_monitor: Add extack support
drop_monitor: Use pre_doit / post_doit hooks
net/core/drop_monitor.c | 58 +++++++++++++++++++++++++++--------------
1 file changed, 38 insertions(+), 20 deletions(-)
--
2.21.0
^ permalink raw reply
* [PATCH net-next 1/6] drop_monitor: Use correct error code
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
In-Reply-To: <20190806131956.26168-1-idosch@idosch.org>
From: Ido Schimmel <idosch@mellanox.com>
The error code 'ENOTSUPP' is reserved for use with NFS. Use 'EOPNOTSUPP'
instead.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
net/core/drop_monitor.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 4ea4347f5062..dcb4d2aeb2a8 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -298,7 +298,7 @@ static int set_all_monitor_traces(int state)
static int net_dm_cmd_config(struct sk_buff *skb,
struct genl_info *info)
{
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
static int net_dm_cmd_trace(struct sk_buff *skb,
@@ -311,7 +311,7 @@ static int net_dm_cmd_trace(struct sk_buff *skb,
return set_all_monitor_traces(TRACE_OFF);
}
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
static int dropmon_net_event(struct notifier_block *ev_block,
--
2.21.0
^ permalink raw reply related
* [PATCH net-next 4/6] drop_monitor: Avoid multiple blank lines
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
In-Reply-To: <20190806131956.26168-1-idosch@idosch.org>
From: Ido Schimmel <idosch@mellanox.com>
Remove multiple blank lines which are visually annoying and useless.
This suppresses the "Please don't use multiple blank lines" checkpatch
messages.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
net/core/drop_monitor.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 35d31b007da4..9080e62245b9 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -300,7 +300,6 @@ static int set_all_monitor_traces(int state)
return rc;
}
-
static int net_dm_cmd_config(struct sk_buff *skb,
struct genl_info *info)
{
@@ -427,7 +426,6 @@ static int __init init_net_drop_monitor(void)
reset_per_cpu_data(data);
}
-
goto out;
out_unreg:
--
2.21.0
^ permalink raw reply related
* [PATCH net-next 3/6] drop_monitor: Document scope of spinlock
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
In-Reply-To: <20190806131956.26168-1-idosch@idosch.org>
From: Ido Schimmel <idosch@mellanox.com>
While 'per_cpu_dm_data' is a per-CPU variable, its 'skb' and
'send_timer' fields can be accessed concurrently by the CPU sending the
netlink notification to user space from the workqueue and the CPU
tracing kfree_skb(). This spinlock is meant to protect against that.
Document its scope and suppress the checkpatch message "spinlock_t
definition without comment".
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
net/core/drop_monitor.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 000ec8b66d1e..35d31b007da4 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -52,7 +52,7 @@ static int trace_state = TRACE_OFF;
static DEFINE_MUTEX(net_dm_mutex);
struct per_cpu_dm_data {
- spinlock_t lock;
+ spinlock_t lock; /* Protects 'skb' and 'send_timer' */
struct sk_buff *skb;
struct work_struct dm_alert_work;
struct timer_list send_timer;
--
2.21.0
^ permalink raw reply related
* [PATCH net-next 5/6] drop_monitor: Add extack support
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
In-Reply-To: <20190806131956.26168-1-idosch@idosch.org>
From: Ido Schimmel <idosch@mellanox.com>
Add various extack messages to make drop_monitor more user friendly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
net/core/drop_monitor.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 9080e62245b9..1d463c0d4bc5 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -241,7 +241,7 @@ static void trace_napi_poll_hit(void *ignore, struct napi_struct *napi,
rcu_read_unlock();
}
-static int set_all_monitor_traces(int state)
+static int set_all_monitor_traces(int state, struct netlink_ext_ack *extack)
{
int rc = 0;
struct dm_hw_stat_delta *new_stat = NULL;
@@ -250,6 +250,7 @@ static int set_all_monitor_traces(int state)
mutex_lock(&net_dm_mutex);
if (state == trace_state) {
+ NL_SET_ERR_MSG_MOD(extack, "Trace state already set to requested state");
rc = -EAGAIN;
goto out_unlock;
}
@@ -257,6 +258,7 @@ static int set_all_monitor_traces(int state)
switch (state) {
case TRACE_ON:
if (!try_module_get(THIS_MODULE)) {
+ NL_SET_ERR_MSG_MOD(extack, "Failed to take reference on module");
rc = -ENODEV;
break;
}
@@ -303,6 +305,8 @@ static int set_all_monitor_traces(int state)
static int net_dm_cmd_config(struct sk_buff *skb,
struct genl_info *info)
{
+ NL_SET_ERR_MSG_MOD(info->extack, "Command not supported");
+
return -EOPNOTSUPP;
}
@@ -311,9 +315,9 @@ static int net_dm_cmd_trace(struct sk_buff *skb,
{
switch (info->genlhdr->cmd) {
case NET_DM_CMD_START:
- return set_all_monitor_traces(TRACE_ON);
+ return set_all_monitor_traces(TRACE_ON, info->extack);
case NET_DM_CMD_STOP:
- return set_all_monitor_traces(TRACE_OFF);
+ return set_all_monitor_traces(TRACE_OFF, info->extack);
}
return -EOPNOTSUPP;
--
2.21.0
^ permalink raw reply related
* [PATCH net-next 6/6] drop_monitor: Use pre_doit / post_doit hooks
From: Ido Schimmel @ 2019-08-06 13:19 UTC (permalink / raw)
To: netdev; +Cc: davem, nhorman, toke, jiri, dsahern, mlxsw, Ido Schimmel
In-Reply-To: <20190806131956.26168-1-idosch@idosch.org>
From: Ido Schimmel <idosch@mellanox.com>
Each operation from user space should be protected by the global drop
monitor mutex. Use the pre_doit / post_doit hooks to take / release the
lock instead of doing it explicitly in each function.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
net/core/drop_monitor.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 1d463c0d4bc5..4deb86f990f1 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -247,12 +247,9 @@ static int set_all_monitor_traces(int state, struct netlink_ext_ack *extack)
struct dm_hw_stat_delta *new_stat = NULL;
struct dm_hw_stat_delta *temp;
- mutex_lock(&net_dm_mutex);
-
if (state == trace_state) {
NL_SET_ERR_MSG_MOD(extack, "Trace state already set to requested state");
- rc = -EAGAIN;
- goto out_unlock;
+ return -EAGAIN;
}
switch (state) {
@@ -296,9 +293,6 @@ static int set_all_monitor_traces(int state, struct netlink_ext_ack *extack)
else
rc = -EINPROGRESS;
-out_unlock:
- mutex_unlock(&net_dm_mutex);
-
return rc;
}
@@ -380,10 +374,26 @@ static const struct genl_ops dropmon_ops[] = {
},
};
+static int net_dm_nl_pre_doit(const struct genl_ops *ops,
+ struct sk_buff *skb, struct genl_info *info)
+{
+ mutex_lock(&net_dm_mutex);
+
+ return 0;
+}
+
+static void net_dm_nl_post_doit(const struct genl_ops *ops,
+ struct sk_buff *skb, struct genl_info *info)
+{
+ mutex_unlock(&net_dm_mutex);
+}
+
static struct genl_family net_drop_monitor_family __ro_after_init = {
.hdrsize = 0,
.name = "NET_DM",
.version = 2,
+ .pre_doit = net_dm_nl_pre_doit,
+ .post_doit = net_dm_nl_post_doit,
.module = THIS_MODULE,
.ops = dropmon_ops,
.n_ops = ARRAY_SIZE(dropmon_ops),
--
2.21.0
^ permalink raw reply related
* Re: [PATCH V2 7/9] vhost: do not use RCU to synchronize MMU notifier with worker
From: Michael S. Tsirkin @ 2019-08-06 13:36 UTC (permalink / raw)
To: Jason Gunthorpe
Cc: Jason Wang, kvm, virtualization, netdev, linux-kernel, linux-mm
In-Reply-To: <20190806115317.GA11627@ziepe.ca>
On Tue, Aug 06, 2019 at 08:53:17AM -0300, Jason Gunthorpe wrote:
> On Sun, Aug 04, 2019 at 04:07:17AM -0400, Michael S. Tsirkin wrote:
> > > > > Also, why can't this just permanently GUP the pages? In fact, where
> > > > > does it put_page them anyhow? Worrying that 7f466 adds a get_user page
> > > > > but does not add a put_page??
> > >
> > > You didn't answer this.. Why not just use GUP?
> > >
> > > Jason
> >
> > Sorry I misunderstood the question. Permanent GUP breaks lots of
> > functionality we need such as THP and numa balancing.
>
> Really? It doesn't look like that many pages are involved..
>
> Jason
Yea. But they just might happen to be heavily accessed ones....
--
MST
^ permalink raw reply
* Re: [PATCH V2 7/9] vhost: do not use RCU to synchronize MMU notifier with worker
From: Jason Gunthorpe @ 2019-08-06 13:40 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Jason Wang, kvm, virtualization, netdev, linux-kernel, linux-mm
In-Reply-To: <20190806093633-mutt-send-email-mst@kernel.org>
On Tue, Aug 06, 2019 at 09:36:58AM -0400, Michael S. Tsirkin wrote:
> On Tue, Aug 06, 2019 at 08:53:17AM -0300, Jason Gunthorpe wrote:
> > On Sun, Aug 04, 2019 at 04:07:17AM -0400, Michael S. Tsirkin wrote:
> > > > > > Also, why can't this just permanently GUP the pages? In fact, where
> > > > > > does it put_page them anyhow? Worrying that 7f466 adds a get_user page
> > > > > > but does not add a put_page??
> > > >
> > > > You didn't answer this.. Why not just use GUP?
> > > >
> > > > Jason
> > >
> > > Sorry I misunderstood the question. Permanent GUP breaks lots of
> > > functionality we need such as THP and numa balancing.
> >
> > Really? It doesn't look like that many pages are involved..
> >
> > Jason
>
> Yea. But they just might happen to be heavily accessed ones....
Maybe you can solve the numa balance problem some other way and use
normal GUP..
Jason
^ permalink raw reply
* Re: [PATCH] bonding: Add vlan tx offload to hw_enc_features
From: Jay Vosburgh @ 2019-08-06 13:41 UTC (permalink / raw)
To: YueHaibing; +Cc: vfalico, andy, davem, jiri, linux-kernel, netdev
In-Reply-To: <20190805134953.63596-1-yuehaibing@huawei.com>
YueHaibing <yuehaibing@huawei.com> wrote:
>As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
>said, we should always enable bonding's vlan tx offload, pass the
>vlan packets to the slave devices with vlan tci, let them to handle
>vlan implementation.
>
>Now if encapsulation protocols like VXLAN is used, skb->encapsulation
>may be set, then the packet is passed to vlan devicec which based on
Typo: "devicec"
>bonding device. However in netif_skb_features(), the check of
>hw_enc_features:
>
> if (skb->encapsulation)
> features &= dev->hw_enc_features;
>
>clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
>in same issue in commit 30d8177e8ac7 like this:
>
>vlan_dev_hard_start_xmit
> -->dev_queue_xmit
> -->validate_xmit_skb
> -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
> -->validate_xmit_vlan
> -->__vlan_hwaccel_push_inside //skb->tci is cleared
>...
> --> bond_start_xmit
> --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
> --> __skb_flow_dissect // nhoff point to IP header
> --> case htons(ETH_P_8021Q)
> // skb_vlan_tag_present is false, so
> vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
> //vlan point to ip header wrongly
>
>Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Looks good to me; should this be tagged with
Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master")
as 30d8177e8ac7 was? If not, is there an appropriate commit id?
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
-J
>---
> drivers/net/bonding/bond_main.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 02fd782..931d9d9 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -1126,6 +1126,8 @@ static void bond_compute_features(struct bonding *bond)
> done:
> bond_dev->vlan_features = vlan_features;
> bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
>+ NETIF_F_HW_VLAN_CTAG_TX |
>+ NETIF_F_HW_VLAN_STAG_TX |
> NETIF_F_GSO_UDP_L4;
> bond_dev->mpls_features = mpls_features;
> bond_dev->gso_max_segs = gso_max_segs;
>--
>2.7.4
---
-Jay Vosburgh, jay.vosburgh@canonical.com
^ permalink raw reply
* [PATCH net-next v2 02/10] net: stmmac: xgmac: Implement set_mtl_tx_queue_weight()
From: Jose Abreu @ 2019-08-06 13:42 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565098881.git.joabreu@synopsys.com>
Implement the TX Queue Weight callback. In order for this to be active
we also need to set ETS algorithm when configuring Queue.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 0a32c96a7854..44d728c5c4e4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -140,7 +140,9 @@ static void dwxgmac2_prog_mtl_tx_algorithms(struct mac_device_info *hw,
u32 tx_alg)
{
void __iomem *ioaddr = hw->pcsr;
+ bool ets = true;
u32 value;
+ int i;
value = readl(ioaddr + XGMAC_MTL_OPMODE);
value &= ~XGMAC_ETSALG;
@@ -156,10 +158,28 @@ static void dwxgmac2_prog_mtl_tx_algorithms(struct mac_device_info *hw,
value |= XGMAC_DWRR;
break;
default:
+ ets = false;
break;
}
writel(value, ioaddr + XGMAC_MTL_OPMODE);
+
+ /* Set ETS if desired */
+ for (i = 0; i < MTL_MAX_TX_QUEUES; i++) {
+ value = readl(ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(i));
+ value &= ~XGMAC_TSA;
+ if (ets)
+ value |= XGMAC_ETS;
+ writel(value, ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(i));
+ }
+}
+
+static void dwxgmac2_set_mtl_tx_queue_weight(struct mac_device_info *hw,
+ u32 weight, u32 queue)
+{
+ void __iomem *ioaddr = hw->pcsr;
+
+ writel(weight, ioaddr + XGMAC_MTL_TCx_QUANTUM_WEIGHT(queue));
}
static void dwxgmac2_map_mtl_to_dma(struct mac_device_info *hw, u32 queue,
@@ -343,7 +363,7 @@ const struct stmmac_ops dwxgmac210_ops = {
.rx_queue_routing = NULL,
.prog_mtl_rx_algorithms = dwxgmac2_prog_mtl_rx_algorithms,
.prog_mtl_tx_algorithms = dwxgmac2_prog_mtl_tx_algorithms,
- .set_mtl_tx_queue_weight = NULL,
+ .set_mtl_tx_queue_weight = dwxgmac2_set_mtl_tx_queue_weight,
.map_mtl_to_dma = dwxgmac2_map_mtl_to_dma,
.config_cbs = dwxgmac2_config_cbs,
.dump_regs = NULL,
--
2.7.4
^ permalink raw reply related
* [PATCH net-next v2 08/10] net: stmmac: Implement Safety Features in XGMAC core
From: Jose Abreu @ 2019-08-06 13:42 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565098881.git.joabreu@synopsys.com>
XGMAC also supports Safety Features. This patch implements the
configuration and handling of this feature in XGMAC core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 26 ++
.../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 281 +++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 4 +
3 files changed, 311 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index f2c281887868..f31cece89d86 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -108,6 +108,12 @@
#define XGMAC_HWFEAT_RXCHCNT GENMASK(15, 12)
#define XGMAC_HWFEAT_TXQCNT GENMASK(9, 6)
#define XGMAC_HWFEAT_RXQCNT GENMASK(3, 0)
+#define XGMAC_HW_FEATURE3 0x00000128
+#define XGMAC_HWFEAT_ASP GENMASK(15, 14)
+#define XGMAC_MAC_DPP_FSM_INT_STATUS 0x00000150
+#define XGMAC_MAC_FSM_CONTROL 0x00000158
+#define XGMAC_PRTYEN BIT(1)
+#define XGMAC_TMOUTEN BIT(0)
#define XGMAC_MDIO_ADDR 0x00000200
#define XGMAC_MDIO_DATA 0x00000204
#define XGMAC_MDIO_C22P 0x00000220
@@ -151,6 +157,16 @@
#define XGMAC_TC_PRTY_MAP1 0x00001044
#define XGMAC_PSTC(x) GENMASK((x) * 8 + 7, (x) * 8)
#define XGMAC_PSTC_SHIFT(x) ((x) * 8)
+#define XGMAC_MTL_ECC_CONTROL 0x000010c0
+#define XGMAC_MTL_SAFETY_INT_STATUS 0x000010c4
+#define XGMAC_MEUIS BIT(1)
+#define XGMAC_MECIS BIT(0)
+#define XGMAC_MTL_ECC_INT_ENABLE 0x000010c8
+#define XGMAC_RPCEIE BIT(12)
+#define XGMAC_ECEIE BIT(8)
+#define XGMAC_RXCEIE BIT(4)
+#define XGMAC_TXCEIE BIT(0)
+#define XGMAC_MTL_ECC_INT_STATUS 0x000010cc
#define XGMAC_MTL_TXQ_OPMODE(x) (0x00001100 + (0x80 * (x)))
#define XGMAC_TQS GENMASK(25, 16)
#define XGMAC_TQS_SHIFT 16
@@ -215,6 +231,16 @@
#define XGMAC_TDPS GENMASK(29, 0)
#define XGMAC_RX_EDMA_CTRL 0x00003044
#define XGMAC_RDPS GENMASK(29, 0)
+#define XGMAC_DMA_SAFETY_INT_STATUS 0x00003064
+#define XGMAC_MCSIS BIT(31)
+#define XGMAC_MSUIS BIT(29)
+#define XGMAC_MSCIS BIT(28)
+#define XGMAC_DEUIS BIT(1)
+#define XGMAC_DECIS BIT(0)
+#define XGMAC_DMA_ECC_INT_ENABLE 0x00003068
+#define XGMAC_DCEIE BIT(1)
+#define XGMAC_TCEIE BIT(0)
+#define XGMAC_DMA_ECC_INT_STATUS 0x0000306c
#define XGMAC_DMA_CH_CONTROL(x) (0x00003100 + (0x80 * (x)))
#define XGMAC_PBLx8 BIT(16)
#define XGMAC_DMA_CH_TX_CONTROL(x) (0x00003104 + (0x80 * (x)))
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index d0fd059d8c53..99dc04826925 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -461,6 +461,284 @@ static void dwxgmac2_update_vlan_hash(struct mac_device_info *hw, u32 hash,
}
}
+struct dwxgmac3_error_desc {
+ bool valid;
+ const char *desc;
+ const char *detailed_desc;
+};
+
+#define STAT_OFF(field) offsetof(struct stmmac_safety_stats, field)
+
+static void dwxgmac3_log_error(struct net_device *ndev, u32 value, bool corr,
+ const char *module_name,
+ const struct dwxgmac3_error_desc *desc,
+ unsigned long field_offset,
+ struct stmmac_safety_stats *stats)
+{
+ unsigned long loc, mask;
+ u8 *bptr = (u8 *)stats;
+ unsigned long *ptr;
+
+ ptr = (unsigned long *)(bptr + field_offset);
+
+ mask = value;
+ for_each_set_bit(loc, &mask, 32) {
+ netdev_err(ndev, "Found %s error in %s: '%s: %s'\n", corr ?
+ "correctable" : "uncorrectable", module_name,
+ desc[loc].desc, desc[loc].detailed_desc);
+
+ /* Update counters */
+ ptr[loc]++;
+ }
+}
+
+static const struct dwxgmac3_error_desc dwxgmac3_mac_errors[32]= {
+ { true, "ATPES", "Application Transmit Interface Parity Check Error" },
+ { true, "DPES", "Descriptor Cache Data Path Parity Check Error" },
+ { true, "TPES", "TSO Data Path Parity Check Error" },
+ { true, "TSOPES", "TSO Header Data Path Parity Check Error" },
+ { true, "MTPES", "MTL Data Path Parity Check Error" },
+ { true, "MTSPES", "MTL TX Status Data Path Parity Check Error" },
+ { true, "MTBUPES", "MAC TBU Data Path Parity Check Error" },
+ { true, "MTFCPES", "MAC TFC Data Path Parity Check Error" },
+ { true, "ARPES", "Application Receive Interface Data Path Parity Check Error" },
+ { true, "MRWCPES", "MTL RWC Data Path Parity Check Error" },
+ { true, "MRRCPES", "MTL RCC Data Path Parity Check Error" },
+ { true, "CWPES", "CSR Write Data Path Parity Check Error" },
+ { true, "ASRPES", "AXI Slave Read Data Path Parity Check Error" },
+ { true, "TTES", "TX FSM Timeout Error" },
+ { true, "RTES", "RX FSM Timeout Error" },
+ { true, "CTES", "CSR FSM Timeout Error" },
+ { true, "ATES", "APP FSM Timeout Error" },
+ { true, "PTES", "PTP FSM Timeout Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 18 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 19 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 20 */
+ { true, "MSTTES", "Master Read/Write Timeout Error" },
+ { true, "SLVTES", "Slave Read/Write Timeout Error" },
+ { true, "ATITES", "Application Timeout on ATI Interface Error" },
+ { true, "ARITES", "Application Timeout on ARI Interface Error" },
+ { true, "FSMPES", "FSM State Parity Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 26 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 27 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 28 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 29 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 30 */
+ { true, "CPI", "Control Register Parity Check Error" },
+};
+
+static void dwxgmac3_handle_mac_err(struct net_device *ndev,
+ void __iomem *ioaddr, bool correctable,
+ struct stmmac_safety_stats *stats)
+{
+ u32 value;
+
+ value = readl(ioaddr + XGMAC_MAC_DPP_FSM_INT_STATUS);
+ writel(value, ioaddr + XGMAC_MAC_DPP_FSM_INT_STATUS);
+
+ dwxgmac3_log_error(ndev, value, correctable, "MAC",
+ dwxgmac3_mac_errors, STAT_OFF(mac_errors), stats);
+}
+
+static const struct dwxgmac3_error_desc dwxgmac3_mtl_errors[32]= {
+ { true, "TXCES", "MTL TX Memory Error" },
+ { true, "TXAMS", "MTL TX Memory Address Mismatch Error" },
+ { true, "TXUES", "MTL TX Memory Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 3 */
+ { true, "RXCES", "MTL RX Memory Error" },
+ { true, "RXAMS", "MTL RX Memory Address Mismatch Error" },
+ { true, "RXUES", "MTL RX Memory Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 7 */
+ { true, "ECES", "MTL EST Memory Error" },
+ { true, "EAMS", "MTL EST Memory Address Mismatch Error" },
+ { true, "EUES", "MTL EST Memory Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 11 */
+ { true, "RPCES", "MTL RX Parser Memory Error" },
+ { true, "RPAMS", "MTL RX Parser Memory Address Mismatch Error" },
+ { true, "RPUES", "MTL RX Parser Memory Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 15 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 16 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 17 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 18 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 19 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 20 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 21 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 22 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 23 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 24 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 25 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 26 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 27 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 28 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 29 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 30 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 31 */
+};
+
+static void dwxgmac3_handle_mtl_err(struct net_device *ndev,
+ void __iomem *ioaddr, bool correctable,
+ struct stmmac_safety_stats *stats)
+{
+ u32 value;
+
+ value = readl(ioaddr + XGMAC_MTL_ECC_INT_STATUS);
+ writel(value, ioaddr + XGMAC_MTL_ECC_INT_STATUS);
+
+ dwxgmac3_log_error(ndev, value, correctable, "MTL",
+ dwxgmac3_mtl_errors, STAT_OFF(mtl_errors), stats);
+}
+
+static const struct dwxgmac3_error_desc dwxgmac3_dma_errors[32]= {
+ { true, "TCES", "DMA TSO Memory Error" },
+ { true, "TAMS", "DMA TSO Memory Address Mismatch Error" },
+ { true, "TUES", "DMA TSO Memory Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 3 */
+ { true, "DCES", "DMA DCACHE Memory Error" },
+ { true, "DAMS", "DMA DCACHE Address Mismatch Error" },
+ { true, "DUES", "DMA DCACHE Memory Error" },
+ { false, "UNKNOWN", "Unknown Error" }, /* 7 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 8 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 9 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 10 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 11 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 12 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 13 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 14 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 15 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 16 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 17 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 18 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 19 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 20 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 21 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 22 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 23 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 24 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 25 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 26 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 27 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 28 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 29 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 30 */
+ { false, "UNKNOWN", "Unknown Error" }, /* 31 */
+};
+
+static void dwxgmac3_handle_dma_err(struct net_device *ndev,
+ void __iomem *ioaddr, bool correctable,
+ struct stmmac_safety_stats *stats)
+{
+ u32 value;
+
+ value = readl(ioaddr + XGMAC_DMA_ECC_INT_STATUS);
+ writel(value, ioaddr + XGMAC_DMA_ECC_INT_STATUS);
+
+ dwxgmac3_log_error(ndev, value, correctable, "DMA",
+ dwxgmac3_dma_errors, STAT_OFF(dma_errors), stats);
+}
+
+static int dwxgmac3_safety_feat_config(void __iomem *ioaddr, unsigned int asp)
+{
+ u32 value;
+
+ if (!asp)
+ return -EINVAL;
+
+ /* 1. Enable Safety Features */
+ writel(0x0, ioaddr + XGMAC_MTL_ECC_CONTROL);
+
+ /* 2. Enable MTL Safety Interrupts */
+ value = readl(ioaddr + XGMAC_MTL_ECC_INT_ENABLE);
+ value |= XGMAC_RPCEIE; /* RX Parser Memory Correctable Error */
+ value |= XGMAC_ECEIE; /* EST Memory Correctable Error */
+ value |= XGMAC_RXCEIE; /* RX Memory Correctable Error */
+ value |= XGMAC_TXCEIE; /* TX Memory Correctable Error */
+ writel(value, ioaddr + XGMAC_MTL_ECC_INT_ENABLE);
+
+ /* 3. Enable DMA Safety Interrupts */
+ value = readl(ioaddr + XGMAC_DMA_ECC_INT_ENABLE);
+ value |= XGMAC_DCEIE; /* Descriptor Cache Memory Correctable Error */
+ value |= XGMAC_TCEIE; /* TSO Memory Correctable Error */
+ writel(value, ioaddr + XGMAC_DMA_ECC_INT_ENABLE);
+
+ /* Only ECC Protection for External Memory feature is selected */
+ if (asp <= 0x1)
+ return 0;
+
+ /* 4. Enable Parity and Timeout for FSM */
+ value = readl(ioaddr + XGMAC_MAC_FSM_CONTROL);
+ value |= XGMAC_PRTYEN; /* FSM Parity Feature */
+ value |= XGMAC_TMOUTEN; /* FSM Timeout Feature */
+ writel(value, ioaddr + XGMAC_MAC_FSM_CONTROL);
+
+ return 0;
+}
+
+static int dwxgmac3_safety_feat_irq_status(struct net_device *ndev,
+ void __iomem *ioaddr,
+ unsigned int asp,
+ struct stmmac_safety_stats *stats)
+{
+ bool err, corr;
+ u32 mtl, dma;
+ int ret = 0;
+
+ if (!asp)
+ return -EINVAL;
+
+ mtl = readl(ioaddr + XGMAC_MTL_SAFETY_INT_STATUS);
+ dma = readl(ioaddr + XGMAC_DMA_SAFETY_INT_STATUS);
+
+ err = (mtl & XGMAC_MCSIS) || (dma & XGMAC_MCSIS);
+ corr = false;
+ if (err) {
+ dwxgmac3_handle_mac_err(ndev, ioaddr, corr, stats);
+ ret |= !corr;
+ }
+
+ err = (mtl & (XGMAC_MEUIS | XGMAC_MECIS)) ||
+ (dma & (XGMAC_MSUIS | XGMAC_MSCIS));
+ corr = (mtl & XGMAC_MECIS) || (dma & XGMAC_MSCIS);
+ if (err) {
+ dwxgmac3_handle_mtl_err(ndev, ioaddr, corr, stats);
+ ret |= !corr;
+ }
+
+ err = dma & (XGMAC_DEUIS | XGMAC_DECIS);
+ corr = dma & XGMAC_DECIS;
+ if (err) {
+ dwxgmac3_handle_dma_err(ndev, ioaddr, corr, stats);
+ ret |= !corr;
+ }
+
+ return ret;
+}
+
+static const struct dwxgmac3_error {
+ const struct dwxgmac3_error_desc *desc;
+} dwxgmac3_all_errors[] = {
+ { dwxgmac3_mac_errors },
+ { dwxgmac3_mtl_errors },
+ { dwxgmac3_dma_errors },
+};
+
+static int dwxgmac3_safety_feat_dump(struct stmmac_safety_stats *stats,
+ int index, unsigned long *count,
+ const char **desc)
+{
+ int module = index / 32, offset = index % 32;
+ unsigned long *ptr = (unsigned long *)stats;
+
+ if (module >= ARRAY_SIZE(dwxgmac3_all_errors))
+ return -EINVAL;
+ if (!dwxgmac3_all_errors[module].desc[offset].valid)
+ return -EINVAL;
+ if (count)
+ *count = *(ptr + index);
+ if (desc)
+ *desc = dwxgmac3_all_errors[module].desc[offset].desc;
+ return 0;
+}
+
const struct stmmac_ops dwxgmac210_ops = {
.core_init = dwxgmac2_core_init,
.set_mac = dwxgmac2_set_mac,
@@ -490,6 +768,9 @@ const struct stmmac_ops dwxgmac210_ops = {
.pcs_get_adv_lp = NULL,
.debug = NULL,
.set_filter = dwxgmac2_set_filter,
+ .safety_feat_config = dwxgmac3_safety_feat_config,
+ .safety_feat_irq_status = dwxgmac3_safety_feat_irq_status,
+ .safety_feat_dump = dwxgmac3_safety_feat_dump,
.set_mac_loopback = dwxgmac2_set_mac_loopback,
.rss_configure = dwxgmac2_rss_configure,
.update_vlan_hash = dwxgmac2_update_vlan_hash,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index b50e275e76c2..e4a1c877f2e1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -399,6 +399,10 @@ static void dwxgmac2_get_hw_feature(void __iomem *ioaddr,
((hw_cap & XGMAC_HWFEAT_TXQCNT) >> 6) + 1;
dma_cap->number_rx_queues =
((hw_cap & XGMAC_HWFEAT_RXQCNT) >> 0) + 1;
+
+ /* MAC HW feature 3 */
+ hw_cap = readl(ioaddr + XGMAC_HW_FEATURE3);
+ dma_cap->asp = (hw_cap & XGMAC_HWFEAT_ASP) >> 14;
}
static void dwxgmac2_rx_watchdog(void __iomem *ioaddr, u32 riwt, u32 nchan)
--
2.7.4
^ permalink raw reply related
* [PATCH net-next v2 05/10] net: stmmac: selftests: Add RSS test
From: Jose Abreu @ 2019-08-06 13:42 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565098881.git.joabreu@synopsys.com>
Add a test for RSS in the stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
index a97b1ea76438..83b775a8cedc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
@@ -700,6 +700,21 @@ static int stmmac_test_flowctrl(struct stmmac_priv *priv)
return ret;
}
+static int stmmac_test_rss(struct stmmac_priv *priv)
+{
+ struct stmmac_packet_attrs attr = { };
+
+ if (!priv->dma_cap.rssen || !priv->rss.enable)
+ return -EOPNOTSUPP;
+
+ attr.dst = priv->dev->dev_addr;
+ attr.exp_hash = true;
+ attr.sport = 0x321;
+ attr.dport = 0x123;
+
+ return __stmmac_test_loopback(priv, &attr);
+}
+
#define STMMAC_LOOPBACK_NONE 0
#define STMMAC_LOOPBACK_MAC 1
#define STMMAC_LOOPBACK_PHY 2
@@ -745,6 +760,10 @@ static const struct stmmac_test {
.name = "Flow Control ",
.lb = STMMAC_LOOPBACK_PHY,
.fn = stmmac_test_flowctrl,
+ }, {
+ .name = "RSS ",
+ .lb = STMMAC_LOOPBACK_PHY,
+ .fn = stmmac_test_rss,
},
};
--
2.7.4
^ permalink raw reply related
* [PATCH net-next v2 10/10] net: stmmac: selftests: Add a selftest for Flexible RX Parser
From: Jose Abreu @ 2019-08-06 13:42 UTC (permalink / raw)
To: netdev
Cc: Joao Pinto, Jose Abreu, Giuseppe Cavallaro, Alexandre Torgue,
David S. Miller, Maxime Coquelin, linux-stm32, linux-arm-kernel,
linux-kernel
In-Reply-To: <cover.1565098881.git.joabreu@synopsys.com>
Add a selftest for the Flexible RX Parser feature.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 98 +++++++++++++++++++++-
1 file changed, 97 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
index 6b08bb15af15..abab84f2ef8b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
@@ -11,8 +11,10 @@
#include <linux/ip.h>
#include <linux/phy.h>
#include <linux/udp.h>
+#include <net/pkt_cls.h>
#include <net/tcp.h>
#include <net/udp.h>
+#include <net/tc_act/tc_gact.h>
#include "stmmac.h"
struct stmmachdr {
@@ -229,7 +231,7 @@ static int stmmac_test_loopback_validate(struct sk_buff *skb,
goto out;
}
if (tpriv->packet->src) {
- if (!ether_addr_equal(ehdr->h_source, orig_ndev->dev_addr))
+ if (!ether_addr_equal(ehdr->h_source, tpriv->packet->src))
goto out;
}
@@ -912,6 +914,96 @@ static int stmmac_test_dvlanfilt(struct stmmac_priv *priv)
return ret;
}
+#ifdef CONFIG_NET_CLS_ACT
+static int stmmac_test_rxp(struct stmmac_priv *priv)
+{
+ unsigned char addr[ETH_ALEN] = {0xde, 0xad, 0xbe, 0xef, 0x00, 0x00};
+ struct tc_cls_u32_offload cls_u32 = { };
+ struct stmmac_packet_attrs attr = { };
+ struct tc_action **actions, *act;
+ struct tc_u32_sel *sel;
+ struct tcf_exts *exts;
+ int ret, i, nk = 1;
+
+ if (!tc_can_offload(priv->dev))
+ return -EOPNOTSUPP;
+ if (!priv->dma_cap.frpsel)
+ return -EOPNOTSUPP;
+
+ sel = kzalloc(sizeof(*sel) + nk * sizeof(struct tc_u32_key), GFP_KERNEL);
+ if (!sel)
+ return -ENOMEM;
+
+ exts = kzalloc(sizeof(*exts), GFP_KERNEL);
+ if (!exts) {
+ ret = -ENOMEM;
+ goto cleanup_sel;
+ }
+
+ actions = kzalloc(nk * sizeof(*actions), GFP_KERNEL);
+ if (!actions) {
+ ret = -ENOMEM;
+ goto cleanup_exts;
+ }
+
+ act = kzalloc(nk * sizeof(*act), GFP_KERNEL);
+ if (!act) {
+ ret = -ENOMEM;
+ goto cleanup_actions;
+ }
+
+ cls_u32.command = TC_CLSU32_NEW_KNODE;
+ cls_u32.common.chain_index = 0;
+ cls_u32.common.protocol = htons(ETH_P_ALL);
+ cls_u32.knode.exts = exts;
+ cls_u32.knode.sel = sel;
+ cls_u32.knode.handle = 0x123;
+
+ exts->nr_actions = nk;
+ exts->actions = actions;
+ for (i = 0; i < nk; i++) {
+ struct tcf_gact *gact = to_gact(&act[i]);
+
+ actions[i] = &act[i];
+ gact->tcf_action = TC_ACT_SHOT;
+ }
+
+ sel->nkeys = nk;
+ sel->offshift = 0;
+ sel->keys[0].off = 6;
+ sel->keys[0].val = htonl(0xdeadbeef);
+ sel->keys[0].mask = ~0x0;
+
+ ret = stmmac_tc_setup_cls_u32(priv, priv, &cls_u32);
+ if (ret)
+ goto cleanup_act;
+
+ attr.dst = priv->dev->dev_addr;
+ attr.src = addr;
+
+ ret = __stmmac_test_loopback(priv, &attr);
+ ret = !ret; /* Shall NOT receive packet */
+
+ cls_u32.command = TC_CLSU32_DELETE_KNODE;
+ stmmac_tc_setup_cls_u32(priv, priv, &cls_u32);
+
+cleanup_act:
+ kfree(act);
+cleanup_actions:
+ kfree(actions);
+cleanup_exts:
+ kfree(exts);
+cleanup_sel:
+ kfree(sel);
+ return ret;
+}
+#else
+static int stmmac_test_rxp(struct stmmac_priv *priv)
+{
+ return -EOPNOTSUPP;
+}
+#endif
+
#define STMMAC_LOOPBACK_NONE 0
#define STMMAC_LOOPBACK_MAC 1
#define STMMAC_LOOPBACK_PHY 2
@@ -969,6 +1061,10 @@ static const struct stmmac_test {
.name = "Double VLAN Filtering",
.lb = STMMAC_LOOPBACK_PHY,
.fn = stmmac_test_dvlanfilt,
+ }, {
+ .name = "Flexible RX Parser ",
+ .lb = STMMAC_LOOPBACK_PHY,
+ .fn = stmmac_test_rxp,
},
};
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox