* [PATCH v4 14/14] dt-bindings: net: add bindings for ADIN PHY driver
From: Alexandru Ardelean @ 2019-08-12 11:23 UTC (permalink / raw)
To: netdev, devicetree, linux-kernel
Cc: davem, robh+dt, mark.rutland, f.fainelli, hkallweit1, andrew,
Alexandru Ardelean
In-Reply-To: <20190812112350.15242-1-alexandru.ardelean@analog.com>
This change adds bindings for the Analog Devices ADIN PHY driver, detailing
all the properties implemented by the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
.../devicetree/bindings/net/adi,adin.yaml | 73 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/adi,adin.yaml
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
new file mode 100644
index 000000000000..69375cb28e92
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1200/ADIN1300 PHY
+
+maintainers:
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ Bindings for Analog Devices Industrial Ethernet PHYs
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+properties:
+ adi,rx-internal-delay-ps:
+ description: |
+ RGMII RX Clock Delay used only when PHY operates in RGMII mode with
+ internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+ enum: [ 1600, 1800, 2000, 2200, 2400 ]
+ default: 2000
+
+ adi,tx-internal-delay-ps:
+ description: |
+ RGMII TX Clock Delay used only when PHY operates in RGMII mode with
+ internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+ enum: [ 1600, 1800, 2000, 2200, 2400 ]
+ default: 2000
+
+ adi,fifo-depth-bits:
+ description: |
+ When operating in RMII mode, this option configures the FIFO depth.
+ enum: [ 4, 8, 12, 16, 20, 24 ]
+ default: 8
+
+ adi,disable-energy-detect:
+ description: |
+ Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
+ is enabled if this property is unspecified)
+ type: boolean
+
+examples:
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-mode = "rgmii-id";
+
+ ethernet-phy@0 {
+ reg = <0>;
+
+ adi,rx-internal-delay-ps = <1800>;
+ adi,tx-internal-delay-ps = <2200>;
+ };
+ };
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-mode = "rmii";
+
+ ethernet-phy@1 {
+ reg = <1>;
+
+ adi,fifo-depth-bits = <16>;
+ adi,disable-energy-detect;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index e8aa8a667864..fd9ab61c2670 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -944,6 +944,7 @@ L: netdev@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/net/phy/adin.c
+F: Documentation/devicetree/bindings/net/adi,adin.yaml
ANALOG DEVICES INC ADIS DRIVER LIBRARY
M: Alexandru Ardelean <alexandru.ardelean@analog.com>
--
2.20.1
^ permalink raw reply related
* [PATCH v4 11/14] net: phy: adin: implement Energy Detect Powerdown mode
From: Alexandru Ardelean @ 2019-08-12 11:23 UTC (permalink / raw)
To: netdev, devicetree, linux-kernel
Cc: davem, robh+dt, mark.rutland, f.fainelli, hkallweit1, andrew,
Alexandru Ardelean
In-Reply-To: <20190812112350.15242-1-alexandru.ardelean@analog.com>
The ADIN PHYs support Energy Detect Powerdown mode, which puts the PHY into
a low power mode when there is no signal on the wire (typically cable
unplugged).
This behavior is enabled by default, but can be disabled via device
property.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/net/phy/adin.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index ddf0512a9a4d..131a72567f25 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -24,6 +24,11 @@
#define ADIN1300_AUTO_MDI_EN BIT(10)
#define ADIN1300_MAN_MDIX_EN BIT(9)
+#define ADIN1300_PHY_CTRL_STATUS2 0x0015
+#define ADIN1300_NRG_PD_EN BIT(3)
+#define ADIN1300_NRG_PD_TX_EN BIT(2)
+#define ADIN1300_NRG_PD_STATUS BIT(1)
+
#define ADIN1300_INT_MASK_REG 0x0018
#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
@@ -136,6 +141,14 @@ static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
{ MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG },
};
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * edpd_enabled true if Energy Detect Powerdown mode is enabled
+ */
+struct adin_priv {
+ bool edpd_enabled;
+};
+
static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
{
size_t i;
@@ -244,6 +257,18 @@ static int adin_config_rmii_mode(struct phy_device *phydev)
ADIN1300_GE_RMII_CFG_REG, reg);
}
+static int adin_config_init_edpd(struct phy_device *phydev)
+{
+ struct adin_priv *priv = phydev->priv;
+
+ if (priv->edpd_enabled)
+ return phy_set_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
+ (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));
+
+ return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
+ (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));
+}
+
static int adin_config_init(struct phy_device *phydev)
{
int rc;
@@ -262,6 +287,10 @@ static int adin_config_init(struct phy_device *phydev)
if (rc < 0)
return rc;
+ rc = adin_config_init_edpd(phydev);
+ if (rc < 0)
+ return rc;
+
phydev_dbg(phydev, "PHY is using mode '%s'\n",
phy_modes(phydev->interface));
@@ -481,6 +510,17 @@ static int adin_reset(struct phy_device *phydev)
static int adin_probe(struct phy_device *phydev)
{
+ struct device *dev = &phydev->mdio.dev;
+ struct adin_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->edpd_enabled =
+ device_property_read_bool(dev, "adi,disable-energy-detect");
+ phydev->priv = priv;
+
return adin_reset(phydev);
}
--
2.20.1
^ permalink raw reply related
* [PATCH v4 06/14] net: phy: adin: make RGMII internal delays configurable
From: Alexandru Ardelean @ 2019-08-12 11:23 UTC (permalink / raw)
To: netdev, devicetree, linux-kernel
Cc: davem, robh+dt, mark.rutland, f.fainelli, hkallweit1, andrew,
Alexandru Ardelean
In-Reply-To: <20190812112350.15242-1-alexandru.ardelean@analog.com>
The internal delays for the RGMII are configurable for both RX & TX. This
change adds support for configuring them via device-tree (or ACPI).
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/net/phy/adin.c | 82 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index badca6881c6c..c882fcd9ada5 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -5,11 +5,13 @@
* Copyright 2019 Analog Devices Inc.
*/
#include <linux/kernel.h>
+#include <linux/bitfield.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/property.h>
#define PHY_ID_ADIN1200 0x0283bc20
#define PHY_ID_ADIN1300 0x0283bc30
@@ -32,15 +34,83 @@
#define ADIN1300_INT_STATUS_REG 0x0019
#define ADIN1300_GE_RGMII_CFG_REG 0xff23
+#define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6)
+#define ADIN1300_GE_RGMII_RX_SEL(x) \
+ FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x)
+#define ADIN1300_GE_RGMII_GTX_MSK GENMASK(5, 3)
+#define ADIN1300_GE_RGMII_GTX_SEL(x) \
+ FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x)
#define ADIN1300_GE_RGMII_RXID_EN BIT(2)
#define ADIN1300_GE_RGMII_TXID_EN BIT(1)
#define ADIN1300_GE_RGMII_EN BIT(0)
+/* RGMII internal delay settings for rx and tx for ADIN1300 */
+#define ADIN1300_RGMII_1_60_NS 0x0001
+#define ADIN1300_RGMII_1_80_NS 0x0002
+#define ADIN1300_RGMII_2_00_NS 0x0000
+#define ADIN1300_RGMII_2_20_NS 0x0006
+#define ADIN1300_RGMII_2_40_NS 0x0007
+
#define ADIN1300_GE_RMII_CFG_REG 0xff24
#define ADIN1300_GE_RMII_EN BIT(0)
+/**
+ * struct adin_cfg_reg_map - map a config value to aregister value
+ * @cfg value in device configuration
+ * @reg value in the register
+ */
+struct adin_cfg_reg_map {
+ int cfg;
+ int reg;
+};
+
+static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
+ { 1600, ADIN1300_RGMII_1_60_NS },
+ { 1800, ADIN1300_RGMII_1_80_NS },
+ { 2000, ADIN1300_RGMII_2_00_NS },
+ { 2200, ADIN1300_RGMII_2_20_NS },
+ { 2400, ADIN1300_RGMII_2_40_NS },
+ { },
+};
+
+static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
+{
+ size_t i;
+
+ for (i = 0; tbl[i].cfg; i++) {
+ if (tbl[i].cfg == cfg)
+ return tbl[i].reg;
+ }
+
+ return -EINVAL;
+}
+
+static u32 adin_get_reg_value(struct phy_device *phydev,
+ const char *prop_name,
+ const struct adin_cfg_reg_map *tbl,
+ u32 dflt)
+{
+ struct device *dev = &phydev->mdio.dev;
+ u32 val;
+ int rc;
+
+ if (device_property_read_u32(dev, prop_name, &val))
+ return dflt;
+
+ rc = adin_lookup_reg_value(tbl, val);
+ if (rc < 0) {
+ phydev_warn(phydev,
+ "Unsupported value %u for %s using default (%u)\n",
+ val, prop_name, dflt);
+ return dflt;
+ }
+
+ return rc;
+}
+
static int adin_config_rgmii_mode(struct phy_device *phydev)
{
+ u32 val;
int reg;
if (!phy_interface_is_rgmii(phydev))
@@ -57,6 +127,12 @@ static int adin_config_rgmii_mode(struct phy_device *phydev)
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
reg |= ADIN1300_GE_RGMII_RXID_EN;
+
+ val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps",
+ adin_rgmii_delays,
+ ADIN1300_RGMII_2_00_NS);
+ reg &= ~ADIN1300_GE_RGMII_RX_MSK;
+ reg |= ADIN1300_GE_RGMII_RX_SEL(val);
} else {
reg &= ~ADIN1300_GE_RGMII_RXID_EN;
}
@@ -64,6 +140,12 @@ static int adin_config_rgmii_mode(struct phy_device *phydev)
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
reg |= ADIN1300_GE_RGMII_TXID_EN;
+
+ val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps",
+ adin_rgmii_delays,
+ ADIN1300_RGMII_2_00_NS);
+ reg &= ~ADIN1300_GE_RGMII_GTX_MSK;
+ reg |= ADIN1300_GE_RGMII_GTX_SEL(val);
} else {
reg &= ~ADIN1300_GE_RGMII_TXID_EN;
}
--
2.20.1
^ permalink raw reply related
* [PATCH v4 07/14] net: phy: adin: make RMII fifo depth configurable
From: Alexandru Ardelean @ 2019-08-12 11:23 UTC (permalink / raw)
To: netdev, devicetree, linux-kernel
Cc: davem, robh+dt, mark.rutland, f.fainelli, hkallweit1, andrew,
Alexandru Ardelean
In-Reply-To: <20190812112350.15242-1-alexandru.ardelean@analog.com>
The FIFO depth can be configured for the RMII mode. This change adds
support for doing this via device-tree (or ACPI).
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/net/phy/adin.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index c882fcd9ada5..4ca685780622 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -52,8 +52,19 @@
#define ADIN1300_RGMII_2_40_NS 0x0007
#define ADIN1300_GE_RMII_CFG_REG 0xff24
+#define ADIN1300_GE_RMII_FIFO_DEPTH_MSK GENMASK(6, 4)
+#define ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x) \
+ FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x)
#define ADIN1300_GE_RMII_EN BIT(0)
+/* RMII fifo depth values */
+#define ADIN1300_RMII_4_BITS 0x0000
+#define ADIN1300_RMII_8_BITS 0x0001
+#define ADIN1300_RMII_12_BITS 0x0002
+#define ADIN1300_RMII_16_BITS 0x0003
+#define ADIN1300_RMII_20_BITS 0x0004
+#define ADIN1300_RMII_24_BITS 0x0005
+
/**
* struct adin_cfg_reg_map - map a config value to aregister value
* @cfg value in device configuration
@@ -73,6 +84,16 @@ static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
{ },
};
+static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = {
+ { 4, ADIN1300_RMII_4_BITS },
+ { 8, ADIN1300_RMII_8_BITS },
+ { 12, ADIN1300_RMII_12_BITS },
+ { 16, ADIN1300_RMII_16_BITS },
+ { 20, ADIN1300_RMII_20_BITS },
+ { 24, ADIN1300_RMII_24_BITS },
+ { },
+};
+
static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
{
size_t i;
@@ -156,6 +177,7 @@ static int adin_config_rgmii_mode(struct phy_device *phydev)
static int adin_config_rmii_mode(struct phy_device *phydev)
{
+ u32 val;
int reg;
if (phydev->interface != PHY_INTERFACE_MODE_RMII)
@@ -169,6 +191,13 @@ static int adin_config_rmii_mode(struct phy_device *phydev)
reg |= ADIN1300_GE_RMII_EN;
+ val = adin_get_reg_value(phydev, "adi,fifo-depth-bits",
+ adin_rmii_fifo_depths,
+ ADIN1300_RMII_8_BITS);
+
+ reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK;
+ reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val);
+
return phy_write_mmd(phydev, MDIO_MMD_VEND1,
ADIN1300_GE_RMII_CFG_REG, reg);
}
--
2.20.1
^ permalink raw reply related
* [PATCH v4 05/14] net: phy: adin: configure RGMII/RMII/MII modes on config
From: Alexandru Ardelean @ 2019-08-12 11:23 UTC (permalink / raw)
To: netdev, devicetree, linux-kernel
Cc: davem, robh+dt, mark.rutland, f.fainelli, hkallweit1, andrew,
Alexandru Ardelean
In-Reply-To: <20190812112350.15242-1-alexandru.ardelean@analog.com>
The ADIN1300 chip supports RGMII, RMII & MII modes. Default (if
unconfigured) is RGMII.
This change adds support for configuring these modes via the device
registers.
For RGMII with internal delays (modes RGMII_ID,RGMII_TXID, RGMII_RXID),
the default delay is 2 ns. This can be configurable and will be done in
a subsequent change.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/net/phy/adin.c | 79 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index efbb732f0398..badca6881c6c 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -31,9 +31,86 @@
(ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
#define ADIN1300_INT_STATUS_REG 0x0019
+#define ADIN1300_GE_RGMII_CFG_REG 0xff23
+#define ADIN1300_GE_RGMII_RXID_EN BIT(2)
+#define ADIN1300_GE_RGMII_TXID_EN BIT(1)
+#define ADIN1300_GE_RGMII_EN BIT(0)
+
+#define ADIN1300_GE_RMII_CFG_REG 0xff24
+#define ADIN1300_GE_RMII_EN BIT(0)
+
+static int adin_config_rgmii_mode(struct phy_device *phydev)
+{
+ int reg;
+
+ if (!phy_interface_is_rgmii(phydev))
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RGMII_CFG_REG,
+ ADIN1300_GE_RGMII_EN);
+
+ reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG);
+ if (reg < 0)
+ return reg;
+
+ reg |= ADIN1300_GE_RGMII_EN;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ reg |= ADIN1300_GE_RGMII_RXID_EN;
+ } else {
+ reg &= ~ADIN1300_GE_RGMII_RXID_EN;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ reg |= ADIN1300_GE_RGMII_TXID_EN;
+ } else {
+ reg &= ~ADIN1300_GE_RGMII_TXID_EN;
+ }
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RGMII_CFG_REG, reg);
+}
+
+static int adin_config_rmii_mode(struct phy_device *phydev)
+{
+ int reg;
+
+ if (phydev->interface != PHY_INTERFACE_MODE_RMII)
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RMII_CFG_REG,
+ ADIN1300_GE_RMII_EN);
+
+ reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG);
+ if (reg < 0)
+ return reg;
+
+ reg |= ADIN1300_GE_RMII_EN;
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RMII_CFG_REG, reg);
+}
+
static int adin_config_init(struct phy_device *phydev)
{
- return genphy_config_init(phydev);
+ int rc;
+
+ rc = genphy_config_init(phydev);
+ if (rc < 0)
+ return rc;
+
+ rc = adin_config_rgmii_mode(phydev);
+ if (rc < 0)
+ return rc;
+
+ rc = adin_config_rmii_mode(phydev);
+ if (rc < 0)
+ return rc;
+
+ phydev_dbg(phydev, "PHY is using mode '%s'\n",
+ phy_modes(phydev->interface));
+
+ return 0;
}
static int adin_phy_ack_intr(struct phy_device *phydev)
--
2.20.1
^ permalink raw reply related
* [PATCH v4 04/14] net: phy: adin: add {write,read}_mmd hooks
From: Alexandru Ardelean @ 2019-08-12 11:23 UTC (permalink / raw)
To: netdev, devicetree, linux-kernel
Cc: davem, robh+dt, mark.rutland, f.fainelli, hkallweit1, andrew,
Alexandru Ardelean
In-Reply-To: <20190812112350.15242-1-alexandru.ardelean@analog.com>
Both ADIN1200 & ADIN1300 support Clause 45 access for some registers.
The Extended Management Interface (EMI) registers are accessible via both
Clause 45 (at register MDIO_MMD_VEND1) and using Clause 22.
The Clause 22 access for MMD regs differs from the standard one defined by
802.3. The ADIN PHYs use registers ExtRegPtr (0x0010) and ExtRegData
(0x0011) to access Clause 45 & EMI registers.
The indirect access is done via the following mechanism (for both R/W):
1. Write the address of the register in the ExtRegPtr
2. Read/write the value of the register via reg ExtRegData
This mechanism is needed to manage configuration of chip settings and to
access EEE registers via Clause 22.
Since Clause 45 access will likely never be used, it is not implemented via
this hook.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/net/phy/adin.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index f4ee611e33df..efbb732f0398 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -14,6 +14,9 @@
#define PHY_ID_ADIN1200 0x0283bc20
#define PHY_ID_ADIN1300 0x0283bc30
+#define ADIN1300_MII_EXT_REG_PTR 0x0010
+#define ADIN1300_MII_EXT_REG_DATA 0x0011
+
#define ADIN1300_INT_MASK_REG 0x0018
#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
@@ -51,6 +54,33 @@ static int adin_phy_config_intr(struct phy_device *phydev)
ADIN1300_INT_MASK_EN);
}
+static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+ int err;
+
+ err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
+ if (err)
+ return err;
+
+ return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
+}
+
+static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
+ u16 val)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+ int err;
+
+ err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
+ if (err)
+ return err;
+
+ return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
+}
+
static struct phy_driver adin_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
@@ -62,6 +92,8 @@ static struct phy_driver adin_driver[] = {
.config_intr = adin_phy_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
+ .read_mmd = adin_read_mmd,
+ .write_mmd = adin_write_mmd,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
@@ -73,6 +105,8 @@ static struct phy_driver adin_driver[] = {
.config_intr = adin_phy_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
+ .read_mmd = adin_read_mmd,
+ .write_mmd = adin_write_mmd,
},
};
--
2.20.1
^ permalink raw reply related
* Re: [PATCH 0/5] can: xilinx_can: Bug fixes
From: Michal Simek @ 2019-08-12 11:05 UTC (permalink / raw)
To: Marc Kleine-Budde, Michal Simek, Appana Durga Kedareswara rao, wg,
davem
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel
In-Reply-To: <6b36bbcb-06e3-63aa-8861-c07c8840e25e@pengutronix.de>
On 12. 08. 19 12:59, Marc Kleine-Budde wrote:
> On 8/12/19 12:57 PM, Michal Simek wrote:
>> On 12. 08. 19 12:47, Marc Kleine-Budde wrote:
>>> On 8/12/19 12:18 PM, Michal Simek wrote:
>>>> On 12. 08. 19 11:10, Marc Kleine-Budde wrote:
>>>>> On 8/12/19 11:05 AM, Marc Kleine-Budde wrote:
>>>>>> On 8/12/19 9:28 AM, Appana Durga Kedareswara rao wrote:
>>>>>>> This patch series fixes below issues
>>>>>>> --> Bugs in the driver w.r.to CANFD 2.0 IP support
>>>>>>> --> Defer the probe if clock is not found
>>>>>>>
>>>>>>> Appana Durga Kedareswara rao (3):
>>>>>>> can: xilinx_can: Fix FSR register handling in the rx path
>>>>>>> can: xilinx_can: Fix the data updation logic for CANFD FD frames
>>>>>>> can: xilinx_can: Fix FSR register FL and RI mask values for canfd 2.0
>>>>>>>
>>>>>>> Srinivas Neeli (1):
>>>>>>> can: xilinx_can: Fix the data phase btr1 calculation
>>>>>>>
>>>>>>> Venkatesh Yadav Abbarapu (1):
>>>>>>> can: xilinx_can: defer the probe if clock is not found
>>>>>>
>>>>>> Please add your S-o-b to patches 4+5.
>>>>>>
>>>>>> As these all are bugfixes please add a reference to the commit it fixes:
>>>>>>
>>>>>> Fixes: commitish ("description")
>>>>>
>>>>> Add this to your ~/.gitconfig:
>>>>>
>>>>> [alias]
>>>>> lfixes = log --pretty=fixes
>>>>> [pretty]
>>>>> fixes = Fixes: %h (\"%s\")
>>>>
>>>> This is understandable and I have this in my .gitconfig for quite a long
>>>> time. And this is just log
>>>>
>>>>> and then use $(git lfixes $commitish).
>>>>
>>>> But what do you mean by this? Are you able to add this to commit message
>>>> just with sha1?
>>>
>>> First identify the commit that this patch fixes then go to the command
>>> line and enter
>>>
>>> git lfixes $committish
>>>
>>> and git will print out the line that you can copy directly to the commit
>>> message.
>>
>> ok. I thought you have any nice way to directly add it to commit message
>> without c&p.
>
> You can insert the output from a console command in vim by adding a "!"
> in front of it in the command mode.
ok.
M
^ permalink raw reply
* Re: [PATCH 0/5] can: xilinx_can: Bug fixes
From: Marc Kleine-Budde @ 2019-08-12 10:59 UTC (permalink / raw)
To: Michal Simek, Appana Durga Kedareswara rao, wg, davem
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel
In-Reply-To: <c09ae89a-509d-55e7-a2d6-44ca2543f333@xilinx.com>
[-- Attachment #1.1: Type: text/plain, Size: 2279 bytes --]
On 8/12/19 12:57 PM, Michal Simek wrote:
> On 12. 08. 19 12:47, Marc Kleine-Budde wrote:
>> On 8/12/19 12:18 PM, Michal Simek wrote:
>>> On 12. 08. 19 11:10, Marc Kleine-Budde wrote:
>>>> On 8/12/19 11:05 AM, Marc Kleine-Budde wrote:
>>>>> On 8/12/19 9:28 AM, Appana Durga Kedareswara rao wrote:
>>>>>> This patch series fixes below issues
>>>>>> --> Bugs in the driver w.r.to CANFD 2.0 IP support
>>>>>> --> Defer the probe if clock is not found
>>>>>>
>>>>>> Appana Durga Kedareswara rao (3):
>>>>>> can: xilinx_can: Fix FSR register handling in the rx path
>>>>>> can: xilinx_can: Fix the data updation logic for CANFD FD frames
>>>>>> can: xilinx_can: Fix FSR register FL and RI mask values for canfd 2.0
>>>>>>
>>>>>> Srinivas Neeli (1):
>>>>>> can: xilinx_can: Fix the data phase btr1 calculation
>>>>>>
>>>>>> Venkatesh Yadav Abbarapu (1):
>>>>>> can: xilinx_can: defer the probe if clock is not found
>>>>>
>>>>> Please add your S-o-b to patches 4+5.
>>>>>
>>>>> As these all are bugfixes please add a reference to the commit it fixes:
>>>>>
>>>>> Fixes: commitish ("description")
>>>>
>>>> Add this to your ~/.gitconfig:
>>>>
>>>> [alias]
>>>> lfixes = log --pretty=fixes
>>>> [pretty]
>>>> fixes = Fixes: %h (\"%s\")
>>>
>>> This is understandable and I have this in my .gitconfig for quite a long
>>> time. And this is just log
>>>
>>>> and then use $(git lfixes $commitish).
>>>
>>> But what do you mean by this? Are you able to add this to commit message
>>> just with sha1?
>>
>> First identify the commit that this patch fixes then go to the command
>> line and enter
>>
>> git lfixes $committish
>>
>> and git will print out the line that you can copy directly to the commit
>> message.
>
> ok. I thought you have any nice way to directly add it to commit message
> without c&p.
You can insert the output from a console command in vim by adding a "!"
in front of it in the command mode.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH 0/5] can: xilinx_can: Bug fixes
From: Michal Simek @ 2019-08-12 10:57 UTC (permalink / raw)
To: Marc Kleine-Budde, Michal Simek, Appana Durga Kedareswara rao, wg,
davem
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel
In-Reply-To: <cb8f91b5-174f-79e5-d476-b01da2f3a65c@pengutronix.de>
On 12. 08. 19 12:47, Marc Kleine-Budde wrote:
> On 8/12/19 12:18 PM, Michal Simek wrote:
>> On 12. 08. 19 11:10, Marc Kleine-Budde wrote:
>>> On 8/12/19 11:05 AM, Marc Kleine-Budde wrote:
>>>> On 8/12/19 9:28 AM, Appana Durga Kedareswara rao wrote:
>>>>> This patch series fixes below issues
>>>>> --> Bugs in the driver w.r.to CANFD 2.0 IP support
>>>>> --> Defer the probe if clock is not found
>>>>>
>>>>> Appana Durga Kedareswara rao (3):
>>>>> can: xilinx_can: Fix FSR register handling in the rx path
>>>>> can: xilinx_can: Fix the data updation logic for CANFD FD frames
>>>>> can: xilinx_can: Fix FSR register FL and RI mask values for canfd 2.0
>>>>>
>>>>> Srinivas Neeli (1):
>>>>> can: xilinx_can: Fix the data phase btr1 calculation
>>>>>
>>>>> Venkatesh Yadav Abbarapu (1):
>>>>> can: xilinx_can: defer the probe if clock is not found
>>>>
>>>> Please add your S-o-b to patches 4+5.
>>>>
>>>> As these all are bugfixes please add a reference to the commit it fixes:
>>>>
>>>> Fixes: commitish ("description")
>>>
>>> Add this to your ~/.gitconfig:
>>>
>>> [alias]
>>> lfixes = log --pretty=fixes
>>> [pretty]
>>> fixes = Fixes: %h (\"%s\")
>>
>> This is understandable and I have this in my .gitconfig for quite a long
>> time. And this is just log
>>
>>> and then use $(git lfixes $commitish).
>>
>> But what do you mean by this? Are you able to add this to commit message
>> just with sha1?
>
> First identify the commit that this patch fixes then go to the command
> line and enter
>
> git lfixes $committish
>
> and git will print out the line that you can copy directly to the commit
> message.
ok. I thought you have any nice way to directly add it to commit message
without c&p.
Thanks,
Michal
^ permalink raw reply
* Re: [PATCH 0/5] can: xilinx_can: Bug fixes
From: Marc Kleine-Budde @ 2019-08-12 10:47 UTC (permalink / raw)
To: Michal Simek, Appana Durga Kedareswara rao, wg, davem
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel
In-Reply-To: <f0e3360d-7c9a-a455-f63c-7fb584dfad2f@xilinx.com>
[-- Attachment #1.1: Type: text/plain, Size: 1883 bytes --]
On 8/12/19 12:18 PM, Michal Simek wrote:
> On 12. 08. 19 11:10, Marc Kleine-Budde wrote:
>> On 8/12/19 11:05 AM, Marc Kleine-Budde wrote:
>>> On 8/12/19 9:28 AM, Appana Durga Kedareswara rao wrote:
>>>> This patch series fixes below issues
>>>> --> Bugs in the driver w.r.to CANFD 2.0 IP support
>>>> --> Defer the probe if clock is not found
>>>>
>>>> Appana Durga Kedareswara rao (3):
>>>> can: xilinx_can: Fix FSR register handling in the rx path
>>>> can: xilinx_can: Fix the data updation logic for CANFD FD frames
>>>> can: xilinx_can: Fix FSR register FL and RI mask values for canfd 2.0
>>>>
>>>> Srinivas Neeli (1):
>>>> can: xilinx_can: Fix the data phase btr1 calculation
>>>>
>>>> Venkatesh Yadav Abbarapu (1):
>>>> can: xilinx_can: defer the probe if clock is not found
>>>
>>> Please add your S-o-b to patches 4+5.
>>>
>>> As these all are bugfixes please add a reference to the commit it fixes:
>>>
>>> Fixes: commitish ("description")
>>
>> Add this to your ~/.gitconfig:
>>
>> [alias]
>> lfixes = log --pretty=fixes
>> [pretty]
>> fixes = Fixes: %h (\"%s\")
>
> This is understandable and I have this in my .gitconfig for quite a long
> time. And this is just log
>
>> and then use $(git lfixes $commitish).
>
> But what do you mean by this? Are you able to add this to commit message
> just with sha1?
First identify the commit that this patch fixes then go to the command
line and enter
git lfixes $committish
and git will print out the line that you can copy directly to the commit
message.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* [PATCH 2/3] ocelot_ace: fix ingress ports setting for rule
From: Yangbo Lu @ 2019-08-12 10:48 UTC (permalink / raw)
To: netdev, David S . Miller, Alexandre Belloni,
Microchip Linux Driver Support
Cc: Yangbo Lu
In-Reply-To: <20190812104827.5935-1-yangbo.lu@nxp.com>
The ingress ports setting of rule should support covering all ports.
This patch is to use u16 ingress_port for ingress port mask setting
for ace rule. One bit corresponds one port.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
drivers/net/ethernet/mscc/ocelot_ace.c | 2 +-
drivers/net/ethernet/mscc/ocelot_ace.h | 2 +-
drivers/net/ethernet/mscc/ocelot_flower.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.c b/drivers/net/ethernet/mscc/ocelot_ace.c
index 5580a58..91250f3 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.c
+++ b/drivers/net/ethernet/mscc/ocelot_ace.c
@@ -352,7 +352,7 @@ static void is2_entry_set(struct ocelot *ocelot, int ix,
data.type = IS2_ACTION_TYPE_NORMAL;
VCAP_KEY_ANY_SET(PAG);
- VCAP_KEY_SET(IGR_PORT_MASK, 0, ~BIT(ace->chip_port));
+ VCAP_KEY_SET(IGR_PORT_MASK, 0, ~ace->ingress_port);
VCAP_KEY_BIT_SET(FIRST, OCELOT_VCAP_BIT_1);
VCAP_KEY_BIT_SET(HOST_MATCH, OCELOT_VCAP_BIT_ANY);
VCAP_KEY_BIT_SET(L2_MC, ace->dmac_mc);
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.h b/drivers/net/ethernet/mscc/ocelot_ace.h
index ce72f02..0fe23e0 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.h
+++ b/drivers/net/ethernet/mscc/ocelot_ace.h
@@ -193,7 +193,7 @@ struct ocelot_ace_rule {
enum ocelot_ace_action action;
struct ocelot_ace_stats stats;
- int chip_port;
+ u16 ingress_port;
enum ocelot_vcap_bit dmac_mc;
enum ocelot_vcap_bit dmac_bc;
diff --git a/drivers/net/ethernet/mscc/ocelot_flower.c b/drivers/net/ethernet/mscc/ocelot_flower.c
index 7c60e8c..bfddc50 100644
--- a/drivers/net/ethernet/mscc/ocelot_flower.c
+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
@@ -184,7 +184,7 @@ struct ocelot_ace_rule *ocelot_ace_rule_create(struct flow_cls_offload *f,
return NULL;
rule->ocelot = block->port->ocelot;
- rule->chip_port = block->port->chip_port;
+ rule->ingress_port = BIT(block->port->chip_port);
return rule;
}
--
2.7.4
^ permalink raw reply related
* [PATCH 3/3] ocelot_ace: fix action of trap
From: Yangbo Lu @ 2019-08-12 10:48 UTC (permalink / raw)
To: netdev, David S . Miller, Alexandre Belloni,
Microchip Linux Driver Support
Cc: Yangbo Lu
In-Reply-To: <20190812104827.5935-1-yangbo.lu@nxp.com>
The trap action should be copying the frame to CPU and
dropping it for forwarding, but current setting was just
copying frame to CPU.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
drivers/net/ethernet/mscc/ocelot_ace.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.c b/drivers/net/ethernet/mscc/ocelot_ace.c
index 91250f3..59ad590 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.c
+++ b/drivers/net/ethernet/mscc/ocelot_ace.c
@@ -317,9 +317,9 @@ static void is2_action_set(struct vcap_data *data,
break;
case OCELOT_ACL_ACTION_TRAP:
VCAP_ACT_SET(PORT_MASK, 0x0);
- VCAP_ACT_SET(MASK_MODE, 0x0);
- VCAP_ACT_SET(POLICE_ENA, 0x0);
- VCAP_ACT_SET(POLICE_IDX, 0x0);
+ VCAP_ACT_SET(MASK_MODE, 0x1);
+ VCAP_ACT_SET(POLICE_ENA, 0x1);
+ VCAP_ACT_SET(POLICE_IDX, OCELOT_POLICER_DISCARD);
VCAP_ACT_SET(CPU_QU_NUM, 0x0);
VCAP_ACT_SET(CPU_COPY_ENA, 0x1);
break;
--
2.7.4
^ permalink raw reply related
* [PATCH 1/3] ocelot_ace: drop member port from ocelot_ace_rule structure
From: Yangbo Lu @ 2019-08-12 10:48 UTC (permalink / raw)
To: netdev, David S . Miller, Alexandre Belloni,
Microchip Linux Driver Support
Cc: Yangbo Lu
In-Reply-To: <20190812104827.5935-1-yangbo.lu@nxp.com>
The ocelot_ace_rule is not port specific. We don't need a member port
in ocelot_ace_rule structure. Drop it and use member ocelot instead.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
drivers/net/ethernet/mscc/ocelot_ace.c | 12 ++++++------
drivers/net/ethernet/mscc/ocelot_ace.h | 2 +-
drivers/net/ethernet/mscc/ocelot_flower.c | 6 +++---
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.c b/drivers/net/ethernet/mscc/ocelot_ace.c
index 39aca1a..5580a58 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.c
+++ b/drivers/net/ethernet/mscc/ocelot_ace.c
@@ -576,7 +576,7 @@ static void is2_entry_set(struct ocelot *ocelot, int ix,
static void is2_entry_get(struct ocelot_ace_rule *rule, int ix)
{
- struct ocelot *op = rule->port->ocelot;
+ struct ocelot *op = rule->ocelot;
struct vcap_data data;
int row = (ix / 2);
u32 cnt;
@@ -655,11 +655,11 @@ int ocelot_ace_rule_offload_add(struct ocelot_ace_rule *rule)
/* Move down the rules to make place for the new rule */
for (i = acl_block->count - 1; i > index; i--) {
ace = ocelot_ace_rule_get_rule_index(acl_block, i);
- is2_entry_set(rule->port->ocelot, i, ace);
+ is2_entry_set(rule->ocelot, i, ace);
}
/* Now insert the new rule */
- is2_entry_set(rule->port->ocelot, index, rule);
+ is2_entry_set(rule->ocelot, index, rule);
return 0;
}
@@ -697,11 +697,11 @@ int ocelot_ace_rule_offload_del(struct ocelot_ace_rule *rule)
/* Move up all the blocks over the deleted rule */
for (i = index; i < acl_block->count; i++) {
ace = ocelot_ace_rule_get_rule_index(acl_block, i);
- is2_entry_set(rule->port->ocelot, i, ace);
+ is2_entry_set(rule->ocelot, i, ace);
}
/* Now delete the last rule, because it is duplicated */
- is2_entry_set(rule->port->ocelot, acl_block->count, &del_ace);
+ is2_entry_set(rule->ocelot, acl_block->count, &del_ace);
return 0;
}
@@ -717,7 +717,7 @@ int ocelot_ace_rule_stats_update(struct ocelot_ace_rule *rule)
/* After we get the result we need to clear the counters */
tmp = ocelot_ace_rule_get_rule_index(acl_block, index);
tmp->stats.pkts = 0;
- is2_entry_set(rule->port->ocelot, index, tmp);
+ is2_entry_set(rule->ocelot, index, tmp);
return 0;
}
diff --git a/drivers/net/ethernet/mscc/ocelot_ace.h b/drivers/net/ethernet/mscc/ocelot_ace.h
index e98944c..ce72f02 100644
--- a/drivers/net/ethernet/mscc/ocelot_ace.h
+++ b/drivers/net/ethernet/mscc/ocelot_ace.h
@@ -186,7 +186,7 @@ struct ocelot_ace_stats {
struct ocelot_ace_rule {
struct list_head list;
- struct ocelot_port *port;
+ struct ocelot *ocelot;
u16 prio;
u32 id;
diff --git a/drivers/net/ethernet/mscc/ocelot_flower.c b/drivers/net/ethernet/mscc/ocelot_flower.c
index 59487d4..7c60e8c 100644
--- a/drivers/net/ethernet/mscc/ocelot_flower.c
+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
@@ -183,7 +183,7 @@ struct ocelot_ace_rule *ocelot_ace_rule_create(struct flow_cls_offload *f,
if (!rule)
return NULL;
- rule->port = block->port;
+ rule->ocelot = block->port->ocelot;
rule->chip_port = block->port->chip_port;
return rule;
}
@@ -219,7 +219,7 @@ static int ocelot_flower_destroy(struct flow_cls_offload *f,
int ret;
rule.prio = get_prio(f->common.prio);
- rule.port = port_block->port;
+ rule.ocelot = port_block->port->ocelot;
rule.id = f->cookie;
ret = ocelot_ace_rule_offload_del(&rule);
@@ -237,7 +237,7 @@ static int ocelot_flower_stats_update(struct flow_cls_offload *f,
int ret;
rule.prio = get_prio(f->common.prio);
- rule.port = port_block->port;
+ rule.ocelot = port_block->port->ocelot;
rule.id = f->cookie;
ret = ocelot_ace_rule_stats_update(&rule);
if (ret)
--
2.7.4
^ permalink raw reply related
* [PATCH 0/3] ocelot_ace: fix and improve the driver
From: Yangbo Lu @ 2019-08-12 10:48 UTC (permalink / raw)
To: netdev, David S . Miller, Alexandre Belloni,
Microchip Linux Driver Support
Cc: Yangbo Lu
This patch-set is to fix some issues and improve the ocelot_ace driver
for using.
Yangbo Lu (3):
ocelot_ace: drop member port from ocelot_ace_rule structure
ocelot_ace: fix ingress ports setting for rule
ocelot_ace: fix action of trap
drivers/net/ethernet/mscc/ocelot_ace.c | 20 ++++++++++----------
drivers/net/ethernet/mscc/ocelot_ace.h | 4 ++--
drivers/net/ethernet/mscc/ocelot_flower.c | 8 ++++----
3 files changed, 16 insertions(+), 16 deletions(-)
--
2.7.4
^ permalink raw reply
* [BUG] access to null-pointer in dsa_switch_event when bridge set up
From: Frank Wunderlich @ 2019-08-12 10:43 UTC (permalink / raw)
To: Andrew Lunn, Vivien Didelot, Florian Fainelli, David S. Miller,
netdev, linux-kernel
Hi,
i've noticed a bug when using bridge on dsa-ports. Tested on Bpi-r2, Crash happens on 5.3-rc1 and rc4, 5.2-rc7 (last version pre 5.3 i have found on my tftp) is not affected.
root@bpi-r2:~# brctl addbr br0
root@bpi-r2:~# ip addr add 192.168.0.11/24 dev br0
root@bpi-r2:~# brctl addif br0 lan0
[ 47.731914] br0: port 1(lan0) entered blocking state
[ 47.736898] br0: port 1(lan0) entered disabled state
[ 47.742586] device lan0 entered promiscuous mode
root@bpi-r2:~# ip link set br0 up
[ 114.675568] br0: port 1(lan0) entered blocking state
[ 114.680612] br0: port 1(lan0) entered forwarding state
[ 114.686643] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
root@bpi-r2:~# [ 114.718094] 8<--- cut here ---
[ 114.721167] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 114.729344] pgd = 661519c9
[ 114.732055] [00000000] *pgd=00000000
[ 114.735642] Internal error: Oops: 80000005 [#1] SMP ARM
[ 114.740865] Modules linked in:
[ 114.743925] CPU: 1 PID: 156 Comm: kworker/1:2 Not tainted 5.3.0-rc4-bpi-r2 #307
[ 114.751231] Hardware name: Mediatek Cortex-A7 (Device Tree)
[ 114.756816] Workqueue: events switchdev_deferred_process_work
[ 114.762564] PC is at 0x0
[ 114.765100] LR is at dsa_switch_event+0x640/0x6e8
[ 114.769801] pc : [<00000000>] lr : [<c09f2f00>] psr: 20070013
[ 114.776064] sp : e71edcc8 ip : 00000000 fp : e71edd0c
[ 114.781285] r10: e71ede73 r9 : ea1b7088 r8 : e6932dd0
[ 114.786506] r7 : ea1b7040 r6 : 00000006 r5 : c1104c48 r4 : ea1b704c
[ 114.793030] r3 : 00000000 r2 : e6932dd0 r1 : 00000006 r0 : ea1b7040
[ 114.799560] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 114.806698] Control: 10c5387d Table: a778006a DAC: 00000051
[ 114.812447] Process kworker/1:2 (pid: 156, stack limit = 0xb5a13451)
[ 114.818801] Stack: (0xe71edcc8 to 0xe71ee000)
[ 114.823162] dcc0: c086981c c11a5c20 00000001 600c0113 00000000 1021bd52
[ 114.831347] dce0: e71edd08 ffffffff 00000000 e71edd54 00000005 00000000 c09f1dd0 00000000
[ 114.839531] dd00: e71edd34 e71edd10 c014d4f8 c09f28cc c1104c48 c1104c48 00000000 e71fd800
[ 114.847715] dd20: c09f0740 c09f1dd0 e71edd4c e71edd38 c014d658 c014d4ac 00000000 c017a738
[ 114.855900] dd40: e71edd7c e71edd50 c09efe1c c014d63c e71eddac e6932dd0 e71ede73 00000000
[ 114.864084] dd60: 00000006 1021bd52 00000000 e71ede38 e71edd8c e71edd80 c09f1e2c c09efdd0
[ 114.872268] dd80: e71eddc4 e71edd90 c0b47cc4 c09f1ddc b43f0a89 1021bd52 00000000 ffffffff
[ 114.880452] dda0: 00000000 e71ede38 00000006 00000000 00000000 00000000 e71eddd4 e71eddc8
[ 114.888637] ddc0: c0b47d5c c0b47c6c e71edde4 e71eddd8 c09f1c58 c0b47d50 e71ede0c e71edde8
[ 114.896821] dde0: c014d4f8 c09f1c14 00000006 c11bc820 e71ede38 e71fd800 e6932dd0 00000000
[ 114.905006] de00: e71ede34 e71ede10 c014dd70 c014d4ac 00000000 e71ede20 c016a99c c1104c48
[ 114.913190] de20: 1021bd52 00000000 e71ede64 e71ede38 c0b479ec c014dd28 e71fd800 00000000
[ 114.921374] de40: e6932dd0 e71ede73 00000001 1021bd52 c1104c48 e71ede73 e71ede9c e71ede68
[ 114.929559] de60: c0b47af4 c0b479a4 00000000 c0b65d88 0014d4f8 1021bd52 e6932dc0 e6932dd0
[ 114.937743] de80: e71fd800 00000100 00000000 c11c50f0 e71edebc e71edea0 c0b47b8c c0b47a5c
[ 114.945927] dea0: e6932dc0 c11bc818 c12332ac 00000100 e71edee4 e71edec0 c0b477e0 c0b47b74
[ 114.954112] dec0: 010000ff c0898820 c11bc83c e909f380 ead8f100 ead92200 e71edef4 e71edee8
[ 114.962296] dee0: c0b47890 c0b47768 e71edf34 e71edef8 c0144dac c0b47880 e90b12c0 ffffe000
[ 114.970480] df00: e71edf1c e71edf10 c0146f48 e909f380 ead8f100 e909f394 ead8f118 ffffe000
[ 114.978665] df20: 00000008 c1103d00 e71edf74 e71edf38 c0145b8c c0144c0c ffffe000 c0e58270
[ 114.986850] df40: c11c4939 ead8f100 c014b4f4 e910bf40 e910bf00 00000000 e71ec000 e909f380
[ 114.995036] df60: c0145b30 ea13fe74 e71edfac e71edf78 c014ba18 c0145b3c e910bf5c e910bf5c
[ 115.003219] df80: e71edfac e910bf00 c014b8b0 00000000 00000000 00000000 00000000 00000000
[ 115.011404] dfa0: 00000000 e71edfb0 c01010e8 c014b8bc 00000000 00000000 00000000 00000000
[ 115.019587] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 115.027770] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 115.035948] Backtrace:
[ 115.038406] [<c09f28c0>] (dsa_switch_event) from [<c014d4f8>] (notifier_call_chain+0x58/0x94)
[ 115.046940] r10:00000000 r9:c09f1dd0 r8:00000000 r7:00000005 r6:e71edd54 r5:00000000
[ 115.054771] r4:ffffffff
[ 115.057308] [<c014d4a0>] (notifier_call_chain) from [<c014d658>] (raw_notifier_call_chain+0x28/0x30)
[ 115.066447] r9:c09f1dd0 r8:c09f0740 r7:e71fd800 r6:00000000 r5:c1104c48 r4:c1104c48
[ 115.074197] [<c014d630>] (raw_notifier_call_chain) from [<c09efe1c>] (dsa_port_mdb_add+0x58/0x84)
[ 115.083078] [<c09efdc4>] (dsa_port_mdb_add) from [<c09f1e2c>] (dsa_slave_port_obj_add+0x5c/0x78)
[ 115.091866] r4:e71ede38
[ 115.094403] [<c09f1dd0>] (dsa_slave_port_obj_add) from [<c0b47cc4>] (__switchdev_handle_port_obj_add+0x64/0xe4)
[ 115.104499] [<c0b47c60>] (__switchdev_handle_port_obj_add) from [<c0b47d5c>] (switchdev_handle_port_obj_add+0x18/0x24)
[ 115.115201] r10:00000000 r9:00000000 r8:00000000 r7:00000006 r6:e71ede38 r5:00000000
[ 115.123032] r4:ffffffff
[ 115.125570] [<c0b47d44>] (switchdev_handle_port_obj_add) from [<c09f1c58>] (dsa_slave_switchdev_blocking_event+0x50/0xb0)
[ 115.136535] [<c09f1c08>] (dsa_slave_switchdev_blocking_event) from [<c014d4f8>] (notifier_call_chain+0x58/0x94)
[ 115.146632] [<c014d4a0>] (notifier_call_chain) from [<c014dd70>] (blocking_notifier_call_chain+0x54/0x6c)
[ 115.156206] r9:00000000 r8:e6932dd0 r7:e71fd800 r6:e71ede38 r5:c11bc820 r4:00000006
[ 115.163956] [<c014dd1c>] (blocking_notifier_call_chain) from [<c0b479ec>] (switchdev_port_obj_notify+0x54/0xb8)
[ 115.174049] r6:00000000 r5:1021bd52 r4:c1104c48
[ 115.178670] [<c0b47998>] (switchdev_port_obj_notify) from [<c0b47af4>] (switchdev_port_obj_add_now+0xa4/0x118)
[ 115.188675] r5:e71ede73 r4:c1104c48
[ 115.192254] [<c0b47a50>] (switchdev_port_obj_add_now) from [<c0b47b8c>] (switchdev_port_obj_add_deferred+0x24/0x70)
[ 115.202698] r9:c11c50f0 r8:00000000 r7:00000100 r6:e71fd800 r5:e6932dd0 r4:e6932dc0
[ 115.210450] [<c0b47b68>] (switchdev_port_obj_add_deferred) from [<c0b477e0>] (switchdev_deferred_process+0x84/0x118)
[ 115.220978] r7:00000100 r6:c12332ac r5:c11bc818 r4:e6932dc0
[ 115.226643] [<c0b4775c>] (switchdev_deferred_process) from [<c0b47890>] (switchdev_deferred_process_work+0x1c/0x24)
[ 115.237085] r7:ead92200 r6:ead8f100 r5:e909f380 r4:c11bc83c
[ 115.242751] [<c0b47874>] (switchdev_deferred_process_work) from [<c0144dac>] (process_one_work+0x1ac/0x4bc)
[ 115.252499] [<c0144c00>] (process_one_work) from [<c0145b8c>] (worker_thread+0x5c/0x580)
[ 115.260597] r10:c1103d00 r9:00000008 r8:ffffe000 r7:ead8f118 r6:e909f394 r5:ead8f100
[ 115.268427] r4:e909f380
[ 115.270965] [<c0145b30>] (worker_thread) from [<c014ba18>] (kthread+0x168/0x170)
[ 115.278368] r10:ea13fe74 r9:c0145b30 r8:e909f380 r7:e71ec000 r6:00000000 r5:e910bf00
[ 115.286199] r4:e910bf40
[ 115.288737] [<c014b8b0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 115.295961] Exception stack(0xe71edfb0 to 0xe71edff8)
[ 115.301014] dfa0: 00000000 00000000 00000000 00000000
[ 115.309197] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 115.317379] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 115.323997] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014b8b0
[ 115.331827] r4:e910bf00
[ 115.334363] Code: bad PC value
[ 115.337583] ---[ end trace 3bdbb989816b27f4 ]---
regards Frank
^ permalink raw reply
* Re: [RFC PATCH v7] rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver
From: Chris Chiu @ 2019-08-12 10:37 UTC (permalink / raw)
To: Jes Sorensen, Kalle Valo, David Miller
Cc: linux-wireless, netdev, Linux Kernel, Linux Upstreaming Team,
Daniel Drake
In-Reply-To: <20190805131452.13257-1-chiu@endlessm.com>
On Mon, Aug 5, 2019 at 9:15 PM Chris Chiu <chiu@endlessm.com> wrote:
>
> We have 3 laptops which connect the wifi by the same RTL8723BU.
> The PCI VID/PID of the wifi chip is 10EC:B720 which is supported.
> They have the same problem with the in-kernel rtl8xxxu driver, the
> iperf (as a client to an ethernet-connected server) gets ~1Mbps.
> Nevertheless, the signal strength is reported as around -40dBm,
> which is quite good. From the wireshark capture, the tx rate for each
> data and qos data packet is only 1Mbps. Compare to the Realtek driver
> at https://github.com/lwfinger/rtl8723bu, the same iperf test gets
> ~12Mbps or better. The signal strength is reported similarly around
> -40dBm. That's why we want to improve.
>
> After reading the source code of the rtl8xxxu driver and Realtek's, the
> major difference is that Realtek's driver has a watchdog which will keep
> monitoring the signal quality and updating the rate mask just like the
> rtl8xxxu_gen2_update_rate_mask() does if signal quality changes.
> And this kind of watchdog also exists in rtlwifi driver of some specific
> chips, ex rtl8192ee, rtl8188ee, rtl8723ae, rtl8821ae...etc. They have
> the same member function named dm_watchdog and will invoke the
> corresponding dm_refresh_rate_adaptive_mask to adjust the tx rate
> mask.
>
> With this commit, the tx rate of each data and qos data packet will
> be 39Mbps (MCS4) with the 0xF00000 as the tx rate mask. The 20th bit
> to 23th bit means MCS4 to MCS7. It means that the firmware still picks
> the lowest rate from the rate mask and explains why the tx rate of
> data and qos data is always lowest 1Mbps because the default rate mask
> passed is always 0xFFFFFFF ranges from the basic CCK rate, OFDM rate,
> and MCS rate. However, with Realtek's driver, the tx rate observed from
> wireshark under the same condition is almost 65Mbps or 72Mbps, which
> indicating that rtl8xxxu could still be further improved.
>
> Signed-off-by: Chris Chiu <chiu@endlessm.com>
> Reviewed-by: Daniel Drake <drake@endlessm.com>
Tested-by: Kleintje Jens <jkleintje@ultratronik.de>
> ---
>
>
> Notes:
> v2:
> - Fix errors and warnings complained by checkpatch.pl
> - Replace data structure rate_adaptive by 2 member variables
> - Make rtl8xxxu_wireless_mode non-static
> - Runs refresh_rate_mask() only in station mode
> v3:
> - Remove ugly rtl8xxxu_watchdog data structure
> - Make sure only one vif exists
> v4:
> - Move cancel_delayed_work from rtl8xxxu_disconnect to rtl8xxxu_stop
> - Clear priv->vif in rtl8xxxu_remove_interface
> - Add rateid as the function argument of update_rate_mask
> - Rephrase the comment for priv->vif more explicit.
> v5:
> - Make refresh_rate_mask() generic for all sub-drivers.
> - Add definitions for SNR related to help determine rssi_level
> v6:
> - Fix typo of the comment for priv->vif
> v7:
> - Fix reported bug of watchdog stop
> - refer to the RxPWDBAll in vendor driver for SNR calculation
>
>
> .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 55 ++++-
> .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 229 +++++++++++++++++-
> 2 files changed, 277 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> index ade057d868f7..582c2a346cec 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> @@ -1187,6 +1187,48 @@ struct rtl8723bu_c2h {
>
> struct rtl8xxxu_fileops;
>
> +/*mlme related.*/
> +enum wireless_mode {
> + WIRELESS_MODE_UNKNOWN = 0,
> + /* Sub-Element */
> + WIRELESS_MODE_B = BIT(0),
> + WIRELESS_MODE_G = BIT(1),
> + WIRELESS_MODE_A = BIT(2),
> + WIRELESS_MODE_N_24G = BIT(3),
> + WIRELESS_MODE_N_5G = BIT(4),
> + WIRELESS_AUTO = BIT(5),
> + WIRELESS_MODE_AC = BIT(6),
> + WIRELESS_MODE_MAX = 0x7F,
> +};
> +
> +/* from rtlwifi/wifi.h */
> +enum ratr_table_mode_new {
> + RATEID_IDX_BGN_40M_2SS = 0,
> + RATEID_IDX_BGN_40M_1SS = 1,
> + RATEID_IDX_BGN_20M_2SS_BN = 2,
> + RATEID_IDX_BGN_20M_1SS_BN = 3,
> + RATEID_IDX_GN_N2SS = 4,
> + RATEID_IDX_GN_N1SS = 5,
> + RATEID_IDX_BG = 6,
> + RATEID_IDX_G = 7,
> + RATEID_IDX_B = 8,
> + RATEID_IDX_VHT_2SS = 9,
> + RATEID_IDX_VHT_1SS = 10,
> + RATEID_IDX_MIX1 = 11,
> + RATEID_IDX_MIX2 = 12,
> + RATEID_IDX_VHT_3SS = 13,
> + RATEID_IDX_BGN_3SS = 14,
> +};
> +
> +#define RTL8XXXU_RATR_STA_INIT 0
> +#define RTL8XXXU_RATR_STA_HIGH 1
> +#define RTL8XXXU_RATR_STA_MID 2
> +#define RTL8XXXU_RATR_STA_LOW 3
> +
> +#define RTL8XXXU_NOISE_FLOOR_MIN -100
> +#define RTL8XXXU_SNR_THRESH_HIGH 50
> +#define RTL8XXXU_SNR_THRESH_LOW 20
> +
> struct rtl8xxxu_priv {
> struct ieee80211_hw *hw;
> struct usb_device *udev;
> @@ -1291,6 +1333,13 @@ struct rtl8xxxu_priv {
> u8 pi_enabled:1;
> u8 no_pape:1;
> u8 int_buf[USB_INTR_CONTENT_LENGTH];
> + u8 rssi_level;
> + /*
> + * Only one virtual interface permitted because only STA mode
> + * is supported and no iface_combinations are provided.
> + */
> + struct ieee80211_vif *vif;
> + struct delayed_work ra_watchdog;
> };
>
> struct rtl8xxxu_rx_urb {
> @@ -1326,7 +1375,7 @@ struct rtl8xxxu_fileops {
> void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel,
> bool ht40);
> void (*update_rate_mask) (struct rtl8xxxu_priv *priv,
> - u32 ramask, int sgi);
> + u32 ramask, u8 rateid, int sgi);
> void (*report_connect) (struct rtl8xxxu_priv *priv,
> u8 macid, bool connect);
> void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
> @@ -1411,9 +1460,9 @@ void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw);
> void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv);
> void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv);
> void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
> - u32 ramask, int sgi);
> + u32 ramask, u8 rateid, int sgi);
> void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
> - u32 ramask, int sgi);
> + u32 ramask, u8 rateid, int sgi);
> void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
> u8 macid, bool connect);
> void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> index c6c41fb962ff..a6f358b9e447 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> @@ -4304,7 +4304,8 @@ static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw,
> rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
> }
>
> -void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, u32 ramask, int sgi)
> +void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
> + u32 ramask, u8 rateid, int sgi)
> {
> struct h2c_cmd h2c;
>
> @@ -4324,7 +4325,7 @@ void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, u32 ramask, int sgi)
> }
>
> void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
> - u32 ramask, int sgi)
> + u32 ramask, u8 rateid, int sgi)
> {
> struct h2c_cmd h2c;
> u8 bw = 0;
> @@ -4338,7 +4339,7 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
> h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff;
>
> h2c.ramask.arg = 0x80;
> - h2c.b_macid_cfg.data1 = 0;
> + h2c.b_macid_cfg.data1 = rateid;
> if (sgi)
> h2c.b_macid_cfg.data1 |= BIT(7);
>
> @@ -4478,6 +4479,40 @@ static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
> rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx);
> }
>
> +static u16
> +rtl8xxxu_wireless_mode(struct ieee80211_hw *hw, struct ieee80211_sta *sta)
> +{
> + u16 network_type = WIRELESS_MODE_UNKNOWN;
> + u32 rate_mask;
> +
> + rate_mask = (sta->supp_rates[0] & 0xfff) |
> + (sta->ht_cap.mcs.rx_mask[0] << 12) |
> + (sta->ht_cap.mcs.rx_mask[0] << 20);
> +
> + if (hw->conf.chandef.chan->band == NL80211_BAND_5GHZ) {
> + if (sta->vht_cap.vht_supported)
> + network_type = WIRELESS_MODE_AC;
> + else if (sta->ht_cap.ht_supported)
> + network_type = WIRELESS_MODE_N_5G;
> +
> + network_type |= WIRELESS_MODE_A;
> + } else {
> + if (sta->vht_cap.vht_supported)
> + network_type = WIRELESS_MODE_AC;
> + else if (sta->ht_cap.ht_supported)
> + network_type = WIRELESS_MODE_N_24G;
> +
> + if (sta->supp_rates[0] <= 0xf)
> + network_type |= WIRELESS_MODE_B;
> + else if (sta->supp_rates[0] & 0xf)
> + network_type |= (WIRELESS_MODE_B | WIRELESS_MODE_G);
> + else
> + network_type |= WIRELESS_MODE_G;
> + }
> +
> + return network_type;
> +}
> +
> static void
> rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> struct ieee80211_bss_conf *bss_conf, u32 changed)
> @@ -4520,7 +4555,10 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> sgi = 1;
> rcu_read_unlock();
>
> - priv->fops->update_rate_mask(priv, ramask, sgi);
> + priv->vif = vif;
> + priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
> +
> + priv->fops->update_rate_mask(priv, ramask, 0, sgi);
>
> rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
>
> @@ -5464,6 +5502,10 @@ static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
>
> switch (vif->type) {
> case NL80211_IFTYPE_STATION:
> + if (!priv->vif)
> + priv->vif = vif;
> + else
> + return -EOPNOTSUPP;
> rtl8xxxu_stop_tx_beacon(priv);
>
> val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
> @@ -5487,6 +5529,9 @@ static void rtl8xxxu_remove_interface(struct ieee80211_hw *hw,
> struct rtl8xxxu_priv *priv = hw->priv;
>
> dev_dbg(&priv->udev->dev, "%s\n", __func__);
> +
> + if (priv->vif)
> + priv->vif = NULL;
> }
>
> static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
> @@ -5772,6 +5817,177 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> return 0;
> }
>
> +static u8 rtl8xxxu_signal_to_snr(int signal)
> +{
> + if (signal < RTL8XXXU_NOISE_FLOOR_MIN)
> + signal = RTL8XXXU_NOISE_FLOOR_MIN;
> + else if (signal > 0)
> + signal = 0;
> + return (u8)(signal - RTL8XXXU_NOISE_FLOOR_MIN);
> +}
> +
> +static void rtl8xxxu_refresh_rate_mask(struct rtl8xxxu_priv *priv,
> + int signal, struct ieee80211_sta *sta)
> +{
> + struct ieee80211_hw *hw = priv->hw;
> + u16 wireless_mode;
> + u8 rssi_level, ratr_idx;
> + u8 txbw_40mhz;
> + u8 snr, snr_thresh_high, snr_thresh_low;
> + u8 go_up_gap = 5;
> +
> + rssi_level = priv->rssi_level;
> + snr = rtl8xxxu_signal_to_snr(signal);
> + snr_thresh_high = RTL8XXXU_SNR_THRESH_HIGH;
> + snr_thresh_low = RTL8XXXU_SNR_THRESH_LOW;
> + txbw_40mhz = (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) ? 1 : 0;
> +
> + switch (rssi_level) {
> + case RTL8XXXU_RATR_STA_MID:
> + snr_thresh_high += go_up_gap;
> + break;
> + case RTL8XXXU_RATR_STA_LOW:
> + snr_thresh_high += go_up_gap;
> + snr_thresh_low += go_up_gap;
> + break;
> + default:
> + break;
> + }
> +
> + if (snr > snr_thresh_high)
> + rssi_level = RTL8XXXU_RATR_STA_HIGH;
> + else if (snr > snr_thresh_low)
> + rssi_level = RTL8XXXU_RATR_STA_MID;
> + else
> + rssi_level = RTL8XXXU_RATR_STA_LOW;
> +
> + if (rssi_level != priv->rssi_level) {
> + int sgi = 0;
> + u32 rate_bitmap = 0;
> +
> + rcu_read_lock();
> + rate_bitmap = (sta->supp_rates[0] & 0xfff) |
> + (sta->ht_cap.mcs.rx_mask[0] << 12) |
> + (sta->ht_cap.mcs.rx_mask[1] << 20);
> + if (sta->ht_cap.cap &
> + (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
> + sgi = 1;
> + rcu_read_unlock();
> +
> + wireless_mode = rtl8xxxu_wireless_mode(hw, sta);
> + switch (wireless_mode) {
> + case WIRELESS_MODE_B:
> + ratr_idx = RATEID_IDX_B;
> + if (rate_bitmap & 0x0000000c)
> + rate_bitmap &= 0x0000000d;
> + else
> + rate_bitmap &= 0x0000000f;
> + break;
> + case WIRELESS_MODE_A:
> + case WIRELESS_MODE_G:
> + ratr_idx = RATEID_IDX_G;
> + if (rssi_level == RTL8XXXU_RATR_STA_HIGH)
> + rate_bitmap &= 0x00000f00;
> + else
> + rate_bitmap &= 0x00000ff0;
> + break;
> + case (WIRELESS_MODE_B | WIRELESS_MODE_G):
> + ratr_idx = RATEID_IDX_BG;
> + if (rssi_level == RTL8XXXU_RATR_STA_HIGH)
> + rate_bitmap &= 0x00000f00;
> + else if (rssi_level == RTL8XXXU_RATR_STA_MID)
> + rate_bitmap &= 0x00000ff0;
> + else
> + rate_bitmap &= 0x00000ff5;
> + break;
> + case WIRELESS_MODE_N_24G:
> + case WIRELESS_MODE_N_5G:
> + case (WIRELESS_MODE_G | WIRELESS_MODE_N_24G):
> + case (WIRELESS_MODE_A | WIRELESS_MODE_N_5G):
> + if (priv->tx_paths == 2 && priv->rx_paths == 2)
> + ratr_idx = RATEID_IDX_GN_N2SS;
> + else
> + ratr_idx = RATEID_IDX_GN_N1SS;
> + case (WIRELESS_MODE_B | WIRELESS_MODE_G | WIRELESS_MODE_N_24G):
> + case (WIRELESS_MODE_B | WIRELESS_MODE_N_24G):
> + if (txbw_40mhz) {
> + if (priv->tx_paths == 2 && priv->rx_paths == 2)
> + ratr_idx = RATEID_IDX_BGN_40M_2SS;
> + else
> + ratr_idx = RATEID_IDX_BGN_40M_1SS;
> + } else {
> + if (priv->tx_paths == 2 && priv->rx_paths == 2)
> + ratr_idx = RATEID_IDX_BGN_20M_2SS_BN;
> + else
> + ratr_idx = RATEID_IDX_BGN_20M_1SS_BN;
> + }
> +
> + if (priv->tx_paths == 2 && priv->rx_paths == 2) {
> + if (rssi_level == RTL8XXXU_RATR_STA_HIGH) {
> + rate_bitmap &= 0x0f8f0000;
> + } else if (rssi_level == RTL8XXXU_RATR_STA_MID) {
> + rate_bitmap &= 0x0f8ff000;
> + } else {
> + if (txbw_40mhz)
> + rate_bitmap &= 0x0f8ff015;
> + else
> + rate_bitmap &= 0x0f8ff005;
> + }
> + } else {
> + if (rssi_level == RTL8XXXU_RATR_STA_HIGH) {
> + rate_bitmap &= 0x000f0000;
> + } else if (rssi_level == RTL8XXXU_RATR_STA_MID) {
> + rate_bitmap &= 0x000ff000;
> + } else {
> + if (txbw_40mhz)
> + rate_bitmap &= 0x000ff015;
> + else
> + rate_bitmap &= 0x000ff005;
> + }
> + }
> + break;
> + default:
> + ratr_idx = RATEID_IDX_BGN_40M_2SS;
> + rate_bitmap &= 0x0fffffff;
> + break;
> + }
> +
> + priv->rssi_level = rssi_level;
> + priv->fops->update_rate_mask(priv, rate_bitmap, ratr_idx, sgi);
> + }
> +}
> +
> +static void rtl8xxxu_watchdog_callback(struct work_struct *work)
> +{
> + struct ieee80211_vif *vif;
> + struct rtl8xxxu_priv *priv;
> +
> + priv = container_of(work, struct rtl8xxxu_priv, ra_watchdog.work);
> + vif = priv->vif;
> +
> + if (vif && vif->type == NL80211_IFTYPE_STATION) {
> + int signal;
> + struct ieee80211_sta *sta;
> +
> + rcu_read_lock();
> + sta = ieee80211_find_sta(vif, vif->bss_conf.bssid);
> + if (!sta) {
> + struct device *dev = &priv->udev->dev;
> +
> + dev_info(dev, "%s: no sta found\n", __func__);
> + rcu_read_unlock();
> + goto out;
> + }
> + rcu_read_unlock();
> +
> + signal = ieee80211_ave_rssi(vif);
> + rtl8xxxu_refresh_rate_mask(priv, signal, sta);
> + }
> +
> +out:
> + schedule_delayed_work(&priv->ra_watchdog, 2 * HZ);
> +}
> +
> static int rtl8xxxu_start(struct ieee80211_hw *hw)
> {
> struct rtl8xxxu_priv *priv = hw->priv;
> @@ -5828,6 +6044,8 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
>
> ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
> }
> +
> + schedule_delayed_work(&priv->ra_watchdog, 2 * HZ);
> exit:
> /*
> * Accept all data and mgmt frames
> @@ -5879,6 +6097,8 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw)
> if (priv->usb_interrupts)
> rtl8xxxu_write32(priv, REG_USB_HIMR, 0);
>
> + cancel_delayed_work_sync(&priv->ra_watchdog);
> +
> rtl8xxxu_free_rx_resources(priv);
> rtl8xxxu_free_tx_resources(priv);
> }
> @@ -6051,6 +6271,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
> INIT_LIST_HEAD(&priv->rx_urb_pending_list);
> spin_lock_init(&priv->rx_urb_lock);
> INIT_WORK(&priv->rx_urb_wq, rtl8xxxu_rx_urb_work);
> + INIT_DELAYED_WORK(&priv->ra_watchdog, rtl8xxxu_watchdog_callback);
>
> usb_set_intfdata(interface, hw);
>
> --
> 2.20.1
>
^ permalink raw reply
* Re: [PATCH iproute2] tc: Fix block-handle support for filter operations
From: Jiri Pirko @ 2019-08-12 10:26 UTC (permalink / raw)
To: Ido Schimmel; +Cc: netdev, stephen, dsahern, jiri, mlxsw, Ido Schimmel
In-Reply-To: <20190812101706.15778-1-idosch@idosch.org>
Mon, Aug 12, 2019 at 12:17:06PM CEST, idosch@idosch.org wrote:
>From: Ido Schimmel <idosch@mellanox.com>
>
>Commit e991c04d64c0 ("Revert "tc: Add batchsize feature for filter and
>actions"") reverted more than it should and broke shared block
>functionality. Fix this by restoring the original functionality.
>
>To reproduce:
>
># tc qdisc add dev swp1 ingress_block 10 ingress
># tc filter add block 10 proto ip pref 1 flower \
> dst_ip 192.0.2.0/24 action drop
>Unknown filter "block", hence option "10" is unparsable
>
>Fixes: e991c04d64c0 ("Revert "tc: Add batchsize feature for filter and actions"")
>Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Thanks Ido!
^ permalink raw reply
* Re: BUG: corrupted list in rxrpc_local_processor
From: syzbot @ 2019-08-12 10:20 UTC (permalink / raw)
To: davem, dhowells, linux-afs, linux-kernel, netdev, syzkaller-bugs
In-Reply-To: <000000000000492086058fad2979@google.com>
syzbot has found a reproducer for the following crash on:
HEAD commit: 125b7e09 net: tc35815: Explicitly check NET_IP_ALIGN is no..
git tree: net
console output: https://syzkaller.appspot.com/x/log.txt?x=16fb7bc2600000
kernel config: https://syzkaller.appspot.com/x/.config?x=a4c9e9f08e9e8960
dashboard link: https://syzkaller.appspot.com/bug?extid=193e29e9387ea5837f1d
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=159d4eba600000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=16ba194a600000
IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com
IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
list_del corruption. prev->next should be ffff8880996e84e0, but was
ffff8880996e8960
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.3.0-rc3+ #159
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: krxrpcd rxrpc_local_processor
RIP: 0010:__list_del_entry_valid.cold+0xf/0x4f lib/list_debug.c:51
Code: e8 e9 03 1e fe 0f 0b 48 89 f1 48 c7 c7 80 25 c6 87 4c 89 e6 e8 d5 03
1e fe 0f 0b 4c 89 f6 48 c7 c7 20 27 c6 87 e8 c4 03 1e fe <0f> 0b 4c 89 ea
4c 89 f6 48 c7 c7 60 26 c6 87 e8 b0 03 1e fe 0f 0b
RSP: 0018:ffff8880a9917cc0 EFLAGS: 00010286
RAX: 0000000000000054 RBX: ffff8880996e84f8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815c3b96 RDI: ffffed1015322f8a
RBP: ffff8880a9917cd8 R08: 0000000000000054 R09: ffffed1015d260d1
R10: ffffed1015d260d0 R11: ffff8880ae930687 R12: ffff88808f998638
R13: ffff88808f998638 R14: ffff8880996e84e0 R15: ffff8880aa0a8500
FS: 0000000000000000(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2648a08db8 CR3: 00000000981a9000 CR4: 00000000001406e0
Call Trace:
__list_del_entry include/linux/list.h:131 [inline]
list_del_init include/linux/list.h:190 [inline]
rxrpc_local_destroyer net/rxrpc/local_object.c:429 [inline]
rxrpc_local_processor+0x251/0x830 net/rxrpc/local_object.c:465
process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Modules linked in:
---[ end trace 4d70382ddfcfe2b8 ]---
RIP: 0010:__list_del_entry_valid.cold+0xf/0x4f lib/list_debug.c:51
Code: e8 e9 03 1e fe 0f 0b 48 89 f1 48 c7 c7 80 25 c6 87 4c 89 e6 e8 d5 03
1e fe 0f 0b 4c 89 f6 48 c7 c7 20 27 c6 87 e8 c4 03 1e fe <0f> 0b 4c 89 ea
4c 89 f6 48 c7 c7 60 26 c6 87 e8 b0 03 1e fe 0f 0b
RSP: 0018:ffff8880a9917cc0 EFLAGS: 00010286
RAX: 0000000000000054 RBX: ffff8880996e84f8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815c3b96 RDI: ffffed1015322f8a
RBP: ffff8880a9917cd8 R08: 0000000000000054 R09: ffffed1015d260d1
R10: ffffed1015d260d0 R11: ffff8880ae930687 R12: ffff88808f998638
R13: ffff88808f998638 R14: ffff8880996e84e0 R15: ffff8880aa0a8500
FS: 0000000000000000(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2648a08db8 CR3: 00000000981a9000 CR4: 00000000001406e0
^ permalink raw reply
* Re: [PATCH 0/5] can: xilinx_can: Bug fixes
From: Michal Simek @ 2019-08-12 10:18 UTC (permalink / raw)
To: Marc Kleine-Budde, Appana Durga Kedareswara rao, wg, davem,
michal.simek
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel
In-Reply-To: <5571da8a-de1f-f420-f6b7-81c6d8932430@pengutronix.de>
On 12. 08. 19 11:10, Marc Kleine-Budde wrote:
> On 8/12/19 11:05 AM, Marc Kleine-Budde wrote:
>> On 8/12/19 9:28 AM, Appana Durga Kedareswara rao wrote:
>>> This patch series fixes below issues
>>> --> Bugs in the driver w.r.to CANFD 2.0 IP support
>>> --> Defer the probe if clock is not found
>>>
>>> Appana Durga Kedareswara rao (3):
>>> can: xilinx_can: Fix FSR register handling in the rx path
>>> can: xilinx_can: Fix the data updation logic for CANFD FD frames
>>> can: xilinx_can: Fix FSR register FL and RI mask values for canfd 2.0
>>>
>>> Srinivas Neeli (1):
>>> can: xilinx_can: Fix the data phase btr1 calculation
>>>
>>> Venkatesh Yadav Abbarapu (1):
>>> can: xilinx_can: defer the probe if clock is not found
>>
>> Please add your S-o-b to patches 4+5.
>>
>> As these all are bugfixes please add a reference to the commit it fixes:
>>
>> Fixes: commitish ("description")
>
> Add this to your ~/.gitconfig:
>
> [alias]
> lfixes = log --pretty=fixes
> [pretty]
> fixes = Fixes: %h (\"%s\")
This is understandable and I have this in my .gitconfig for quite a long
time. And this is just log
> and then use $(git lfixes $commitish).
But what do you mean by this? Are you able to add this to commit message
just with sha1?
Thanks,
Michal
^ permalink raw reply
* [PATCH iproute2] tc: Fix block-handle support for filter operations
From: Ido Schimmel @ 2019-08-12 10:17 UTC (permalink / raw)
To: netdev; +Cc: stephen, dsahern, jiri, mlxsw, Ido Schimmel
From: Ido Schimmel <idosch@mellanox.com>
Commit e991c04d64c0 ("Revert "tc: Add batchsize feature for filter and
actions"") reverted more than it should and broke shared block
functionality. Fix this by restoring the original functionality.
To reproduce:
# tc qdisc add dev swp1 ingress_block 10 ingress
# tc filter add block 10 proto ip pref 1 flower \
dst_ip 192.0.2.0/24 action drop
Unknown filter "block", hence option "10" is unparsable
Fixes: e991c04d64c0 ("Revert "tc: Add batchsize feature for filter and actions"")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
tc/tc_filter.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/tc/tc_filter.c b/tc/tc_filter.c
index 53759a7a8876..23e21d89d7d1 100644
--- a/tc/tc_filter.c
+++ b/tc/tc_filter.c
@@ -74,6 +74,7 @@ static int tc_filter_modify(int cmd, unsigned int flags, int argc, char **argv)
__u32 prio = 0;
__u32 protocol = 0;
int protocol_set = 0;
+ __u32 block_index = 0;
__u32 chain_index;
int chain_index_set = 0;
char *fhandle = NULL;
@@ -89,7 +90,21 @@ static int tc_filter_modify(int cmd, unsigned int flags, int argc, char **argv)
NEXT_ARG();
if (d[0])
duparg("dev", *argv);
+ if (block_index) {
+ fprintf(stderr, "Error: \"dev\" and \"block\" are mutually exclusive\n");
+ return -1;
+ }
strncpy(d, *argv, sizeof(d)-1);
+ } else if (matches(*argv, "block") == 0) {
+ NEXT_ARG();
+ if (block_index)
+ duparg("block", *argv);
+ if (d[0]) {
+ fprintf(stderr, "Error: \"dev\" and \"block\" are mutually exclusive\n");
+ return -1;
+ }
+ if (get_u32(&block_index, *argv, 0) || !block_index)
+ invarg("invalid block index value", *argv);
} else if (strcmp(*argv, "root") == 0) {
if (req.t.tcm_parent) {
fprintf(stderr,
@@ -184,6 +199,9 @@ static int tc_filter_modify(int cmd, unsigned int flags, int argc, char **argv)
fprintf(stderr, "Cannot find device \"%s\"\n", d);
return 1;
}
+ } else if (block_index) {
+ req.t.tcm_ifindex = TCM_IFINDEX_MAGIC_BLOCK;
+ req.t.tcm_block_index = block_index;
}
if (q) {
--
2.21.0
^ permalink raw reply related
* Re: [PATCH bpf-next v2 2/4] bpf: support cloning sk storage on accept()
From: Daniel Borkmann @ 2019-08-12 10:17 UTC (permalink / raw)
To: Stanislav Fomichev, netdev, bpf
Cc: davem, ast, Martin KaFai Lau, Yonghong Song
In-Reply-To: <20190809161038.186678-3-sdf@google.com>
On 8/9/19 6:10 PM, Stanislav Fomichev wrote:
> Add new helper bpf_sk_storage_clone which optionally clones sk storage
> and call it from sk_clone_lock.
>
> Cc: Martin KaFai Lau <kafai@fb.com>
> Cc: Yonghong Song <yhs@fb.com>
> Signed-off-by: Stanislav Fomichev <sdf@google.com>
[...]
> +int bpf_sk_storage_clone(const struct sock *sk, struct sock *newsk)
> +{
> + struct bpf_sk_storage *new_sk_storage = NULL;
> + struct bpf_sk_storage *sk_storage;
> + struct bpf_sk_storage_elem *selem;
> + int ret;
> +
> + RCU_INIT_POINTER(newsk->sk_bpf_storage, NULL);
> +
> + rcu_read_lock();
> + sk_storage = rcu_dereference(sk->sk_bpf_storage);
> +
> + if (!sk_storage || hlist_empty(&sk_storage->list))
> + goto out;
> +
> + hlist_for_each_entry_rcu(selem, &sk_storage->list, snode) {
> + struct bpf_sk_storage_elem *copy_selem;
> + struct bpf_sk_storage_map *smap;
> + struct bpf_map *map;
> + int refold;
> +
> + smap = rcu_dereference(SDATA(selem)->smap);
> + if (!(smap->map.map_flags & BPF_F_CLONE))
> + continue;
> +
> + map = bpf_map_inc_not_zero(&smap->map, false);
> + if (IS_ERR(map))
> + continue;
> +
> + copy_selem = bpf_sk_storage_clone_elem(newsk, smap, selem);
> + if (!copy_selem) {
> + ret = -ENOMEM;
> + bpf_map_put(map);
> + goto err;
> + }
> +
> + if (new_sk_storage) {
> + selem_link_map(smap, copy_selem);
> + __selem_link_sk(new_sk_storage, copy_selem);
> + } else {
> + ret = sk_storage_alloc(newsk, smap, copy_selem);
> + if (ret) {
> + kfree(copy_selem);
> + atomic_sub(smap->elem_size,
> + &newsk->sk_omem_alloc);
> + bpf_map_put(map);
> + goto err;
> + }
> +
> + new_sk_storage = rcu_dereference(copy_selem->sk_storage);
> + }
> + bpf_map_put(map);
The map get/put combination /under/ RCU read lock seems a bit odd to me, could
you exactly describe the race that this would be preventing?
> + }
> +
> +out:
> + rcu_read_unlock();
> + return 0;
> +
> +err:
> + rcu_read_unlock();
> +
> + bpf_sk_storage_free(newsk);
> + return ret;
> +}
Thanks,
Daniel
^ permalink raw reply
* [patch net-next] netdevsim: implement support for devlink region and snapshots
From: Jiri Pirko @ 2019-08-12 10:16 UTC (permalink / raw)
To: netdev; +Cc: davem, jakub.kicinski, mlxsw
From: Jiri Pirko <jiri@mellanox.com>
Implement dummy region of size 32K and allow user to create snapshots
or random data using debugfs file trigger.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
drivers/net/netdevsim/dev.c | 66 ++++++++++++++++++++++++++++++-
drivers/net/netdevsim/netdevsim.h | 1 +
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/net/netdevsim/dev.c b/drivers/net/netdevsim/dev.c
index 08ca59fc189b..e76ea6a3cb60 100644
--- a/drivers/net/netdevsim/dev.c
+++ b/drivers/net/netdevsim/dev.c
@@ -27,6 +27,41 @@
static struct dentry *nsim_dev_ddir;
+#define NSIM_DEV_DUMMY_REGION_SIZE (1024 * 32)
+
+static ssize_t nsim_dev_take_snapshot_write(struct file *file,
+ const char __user *data,
+ size_t count, loff_t *ppos)
+{
+ struct nsim_dev *nsim_dev = file->private_data;
+ void *dummy_data;
+ u32 id;
+ int err;
+
+ dummy_data = kmalloc(NSIM_DEV_DUMMY_REGION_SIZE, GFP_KERNEL);
+ if (!dummy_data) {
+ pr_err("Failed to allocate memory for region snapshot\n");
+ goto out;
+ }
+
+ get_random_bytes(dummy_data, NSIM_DEV_DUMMY_REGION_SIZE);
+
+ id = devlink_region_shapshot_id_get(priv_to_devlink(nsim_dev));
+ err = devlink_region_snapshot_create(nsim_dev->dummy_region,
+ dummy_data, id, kfree);
+ if (err)
+ pr_err("Failed to create region snapshot\n");
+
+out:
+ return count;
+}
+
+static const struct file_operations nsim_dev_take_snapshot_fops = {
+ .open = simple_open,
+ .write = nsim_dev_take_snapshot_write,
+ .llseek = generic_file_llseek,
+};
+
static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
{
char dev_ddir_name[16];
@@ -44,6 +79,8 @@ static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
&nsim_dev->max_macs);
debugfs_create_bool("test1", 0600, nsim_dev->ddir,
&nsim_dev->test1);
+ debugfs_create_file("take_snapshot", 0200, nsim_dev->ddir, nsim_dev,
+ &nsim_dev_take_snapshot_fops);
return 0;
}
@@ -248,6 +285,26 @@ static void nsim_devlink_param_load_driverinit_values(struct devlink *devlink)
nsim_dev->test1 = saved_value.vbool;
}
+#define NSIM_DEV_DUMMY_REGION_SNAPSHOT_MAX 16
+
+static int nsim_dev_dummy_region_init(struct nsim_dev *nsim_dev,
+ struct devlink *devlink)
+{
+ nsim_dev->dummy_region =
+ devlink_region_create(devlink, "dummy",
+ NSIM_DEV_DUMMY_REGION_SNAPSHOT_MAX,
+ NSIM_DEV_DUMMY_REGION_SIZE);
+ if (IS_ERR(nsim_dev->dummy_region))
+ return PTR_ERR(nsim_dev->dummy_region);
+
+ return 0;
+}
+
+static void nsim_dev_dummy_region_exit(struct nsim_dev *nsim_dev)
+{
+ devlink_region_destroy(nsim_dev->dummy_region);
+}
+
static int nsim_dev_reload(struct devlink *devlink,
struct netlink_ext_ack *extack)
{
@@ -363,10 +420,14 @@ nsim_dev_create(struct nsim_bus_dev *nsim_bus_dev, unsigned int port_count)
goto err_dl_unregister;
nsim_devlink_set_params_init_values(nsim_dev, devlink);
- err = nsim_dev_debugfs_init(nsim_dev);
+ err = nsim_dev_dummy_region_init(nsim_dev, devlink);
if (err)
goto err_params_unregister;
+ err = nsim_dev_debugfs_init(nsim_dev);
+ if (err)
+ goto err_dummy_region_exit;
+
err = nsim_bpf_dev_init(nsim_dev);
if (err)
goto err_debugfs_exit;
@@ -376,6 +437,8 @@ nsim_dev_create(struct nsim_bus_dev *nsim_bus_dev, unsigned int port_count)
err_debugfs_exit:
nsim_dev_debugfs_exit(nsim_dev);
+err_dummy_region_exit:
+ nsim_dev_dummy_region_exit(nsim_dev);
err_params_unregister:
devlink_params_unregister(devlink, nsim_devlink_params,
ARRAY_SIZE(nsim_devlink_params));
@@ -396,6 +459,7 @@ static void nsim_dev_destroy(struct nsim_dev *nsim_dev)
nsim_bpf_dev_exit(nsim_dev);
nsim_dev_debugfs_exit(nsim_dev);
+ nsim_dev_dummy_region_exit(nsim_dev);
devlink_params_unregister(devlink, nsim_devlink_params,
ARRAY_SIZE(nsim_devlink_params));
devlink_unregister(devlink);
diff --git a/drivers/net/netdevsim/netdevsim.h b/drivers/net/netdevsim/netdevsim.h
index 95751a817508..4c758c6919f5 100644
--- a/drivers/net/netdevsim/netdevsim.h
+++ b/drivers/net/netdevsim/netdevsim.h
@@ -160,6 +160,7 @@ struct nsim_dev {
bool fw_update_status;
u32 max_macs;
bool test1;
+ struct devlink_region *dummy_region;
};
int nsim_dev_init(void);
--
2.21.0
^ permalink raw reply related
* [PATCH v2 1/5] can: xilinx_can: Skip error message on deferred probe
From: Appana Durga Kedareswara rao @ 2019-08-12 10:06 UTC (permalink / raw)
To: wg, mkl, davem, michal.simek
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel,
Venkatesh Yadav Abbarapu, Appana Durga Kedareswara rao
In-Reply-To: <1565604406-4920-1-git-send-email-appana.durga.rao@xilinx.com>
From: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
When can clock is provided from the clock wizard, clock wizard driver may
not be available when can driver probes resulting to the error message
"Device clock not found error".
As this error message is not very userful to the end user, skip printing
it in the case of deferred probe.
Fixes: b1201e44 ("can: xilinx CAN controller support")
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/net/can/xilinx_can.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index bd95cfa..ac175ab 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1791,7 +1791,8 @@ static int xcan_probe(struct platform_device *pdev)
/* Getting the CAN can_clk info */
priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
if (IS_ERR(priv->can_clk)) {
- dev_err(&pdev->dev, "Device clock not found.\n");
+ if (PTR_ERR(priv->can_clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Device clock not found.\n");
ret = PTR_ERR(priv->can_clk);
goto err_free;
}
--
2.7.4
^ permalink raw reply related
* [PATCH v2 3/5] can: xilinx_can: Fix the data updation logic for CANFD FD frames
From: Appana Durga Kedareswara rao @ 2019-08-12 10:06 UTC (permalink / raw)
To: wg, mkl, davem, michal.simek
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel,
Appana Durga Kedareswara rao
In-Reply-To: <1565604406-4920-1-git-send-email-appana.durga.rao@xilinx.com>
commit c223da689324 ("can: xilinx_can: Add support for CANFD FD frames")
is writing data to a wrong offset for FD frames.
This patch fixes this issue.
Fixes: c223da6 ("can: xilinx_can: Add support for CANFD FD frames")
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/net/can/xilinx_can.c | 29 ++++++++---------------------
1 file changed, 8 insertions(+), 21 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 2d3399e..c9b951b 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -66,8 +66,7 @@ enum xcan_reg {
#define XCAN_FRAME_DLC_OFFSET(frame_base) ((frame_base) + 0x04)
#define XCAN_FRAME_DW1_OFFSET(frame_base) ((frame_base) + 0x08)
#define XCAN_FRAME_DW2_OFFSET(frame_base) ((frame_base) + 0x0C)
-#define XCANFD_FRAME_DW_OFFSET(frame_base, n) (((frame_base) + 0x08) + \
- ((n) * XCAN_CANFD_FRAME_SIZE))
+#define XCANFD_FRAME_DW_OFFSET(frame_base) ((frame_base) + 0x08)
#define XCAN_CANFD_FRAME_SIZE 0x48
#define XCAN_TXMSG_FRAME_OFFSET(n) (XCAN_TXMSG_BASE_OFFSET + \
@@ -600,7 +599,7 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb,
if (priv->devtype.cantype == XAXI_CANFD ||
priv->devtype.cantype == XAXI_CANFD_2_0) {
for (i = 0; i < cf->len; i += 4) {
- ramoff = XCANFD_FRAME_DW_OFFSET(frame_offset, dwindex) +
+ ramoff = XCANFD_FRAME_DW_OFFSET(frame_offset) +
(dwindex * XCANFD_DW_BYTES);
priv->write_reg(priv, ramoff,
be32_to_cpup((__be32 *)(cf->data + i)));
@@ -816,10 +815,8 @@ static int xcanfd_rx(struct net_device *ndev, int frame_base)
struct net_device_stats *stats = &ndev->stats;
struct canfd_frame *cf;
struct sk_buff *skb;
- u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, fsr, readindex;
+ u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, dw_offset;
- fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
- readindex = fsr & XCAN_FSR_RI_MASK;
id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base));
dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base));
if (dlc & XCAN_DLCR_EDL_MASK)
@@ -863,26 +860,16 @@ static int xcanfd_rx(struct net_device *ndev, int frame_base)
/* Check the frame received is FD or not*/
if (dlc & XCAN_DLCR_EDL_MASK) {
for (i = 0; i < cf->len; i += 4) {
- if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
- data[0] = priv->read_reg(priv,
- (XCAN_RXMSG_2_FRAME_OFFSET(readindex) +
- (dwindex * XCANFD_DW_BYTES)));
- else
- data[0] = priv->read_reg(priv,
- (XCAN_RXMSG_FRAME_OFFSET(readindex) +
- (dwindex * XCANFD_DW_BYTES)));
+ dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base) +
+ (dwindex * XCANFD_DW_BYTES);
+ data[0] = priv->read_reg(priv, dw_offset);
*(__be32 *)(cf->data + i) = cpu_to_be32(data[0]);
dwindex++;
}
} else {
for (i = 0; i < cf->len; i += 4) {
- if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
- data[0] = priv->read_reg(priv,
- XCAN_RXMSG_2_FRAME_OFFSET(readindex) +
- i);
- else
- data[0] = priv->read_reg(priv,
- XCAN_RXMSG_FRAME_OFFSET(readindex) + i);
+ dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base);
+ data[0] = priv->read_reg(priv, dw_offset + i);
*(__be32 *)(cf->data + i) = cpu_to_be32(data[0]);
}
}
--
2.7.4
^ permalink raw reply related
* [PATCH v2 2/5] can: xilinx_can: Fix FSR register handling in the rx path
From: Appana Durga Kedareswara rao @ 2019-08-12 10:06 UTC (permalink / raw)
To: wg, mkl, davem, michal.simek
Cc: linux-can, netdev, linux-arm-kernel, linux-kernel,
Appana Durga Kedareswara rao
In-Reply-To: <1565604406-4920-1-git-send-email-appana.durga.rao@xilinx.com>
After commit c223da689324 ("can: xilinx_can: Add support for
CANFD FD frames") Driver is updating the FSR IRI index multiple
times(i.e in xcanfd_rx() and xcan_rx_fifo_get_next_frame()),
It should be updated once per rx packet this patch fixes this issue,
also this patch removes the unnecessary fsr register checks in
xcanfd_rx() API.
Fixes: c223da6 ("can: xilinx_can: Add support for CANFD FD frames")
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/net/can/xilinx_can.c | 139 ++++++++++++++++++++-----------------------
1 file changed, 63 insertions(+), 76 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index ac175ab..2d3399e 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -819,91 +819,78 @@ static int xcanfd_rx(struct net_device *ndev, int frame_base)
u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, fsr, readindex;
fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
- if (fsr & XCAN_FSR_FL_MASK) {
- readindex = fsr & XCAN_FSR_RI_MASK;
- id_xcan = priv->read_reg(priv,
- XCAN_FRAME_ID_OFFSET(frame_base));
- dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base));
- if (dlc & XCAN_DLCR_EDL_MASK)
- skb = alloc_canfd_skb(ndev, &cf);
- else
- skb = alloc_can_skb(ndev, (struct can_frame **)&cf);
+ readindex = fsr & XCAN_FSR_RI_MASK;
+ id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base));
+ dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base));
+ if (dlc & XCAN_DLCR_EDL_MASK)
+ skb = alloc_canfd_skb(ndev, &cf);
+ else
+ skb = alloc_can_skb(ndev, (struct can_frame **)&cf);
- if (unlikely(!skb)) {
- stats->rx_dropped++;
- return 0;
- }
+ if (unlikely(!skb)) {
+ stats->rx_dropped++;
+ return 0;
+ }
- /* Change Xilinx CANFD data length format to socketCAN data
- * format
- */
- if (dlc & XCAN_DLCR_EDL_MASK)
- cf->len = can_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >>
+ /* Change Xilinx CANFD data length format to socketCAN data
+ * format
+ */
+ if (dlc & XCAN_DLCR_EDL_MASK)
+ cf->len = can_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >>
+ XCAN_DLCR_DLC_SHIFT);
+ else
+ cf->len = get_can_dlc((dlc & XCAN_DLCR_DLC_MASK) >>
XCAN_DLCR_DLC_SHIFT);
- else
- cf->len = get_can_dlc((dlc & XCAN_DLCR_DLC_MASK) >>
- XCAN_DLCR_DLC_SHIFT);
-
- /* Change Xilinx CAN ID format to socketCAN ID format */
- if (id_xcan & XCAN_IDR_IDE_MASK) {
- /* The received frame is an Extended format frame */
- cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3;
- cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >>
- XCAN_IDR_ID2_SHIFT;
- cf->can_id |= CAN_EFF_FLAG;
- if (id_xcan & XCAN_IDR_RTR_MASK)
- cf->can_id |= CAN_RTR_FLAG;
- } else {
- /* The received frame is a standard format frame */
- cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >>
- XCAN_IDR_ID1_SHIFT;
- if (!(dlc & XCAN_DLCR_EDL_MASK) && (id_xcan &
- XCAN_IDR_SRR_MASK))
- cf->can_id |= CAN_RTR_FLAG;
- }
- /* Check the frame received is FD or not*/
- if (dlc & XCAN_DLCR_EDL_MASK) {
- for (i = 0; i < cf->len; i += 4) {
- if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
- data[0] = priv->read_reg(priv,
+ /* Change Xilinx CAN ID format to socketCAN ID format */
+ if (id_xcan & XCAN_IDR_IDE_MASK) {
+ /* The received frame is an Extended format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3;
+ cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >>
+ XCAN_IDR_ID2_SHIFT;
+ cf->can_id |= CAN_EFF_FLAG;
+ if (id_xcan & XCAN_IDR_RTR_MASK)
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ /* The received frame is a standard format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >>
+ XCAN_IDR_ID1_SHIFT;
+ if (!(dlc & XCAN_DLCR_EDL_MASK) && (id_xcan &
+ XCAN_IDR_SRR_MASK))
+ cf->can_id |= CAN_RTR_FLAG;
+ }
+
+ /* Check the frame received is FD or not*/
+ if (dlc & XCAN_DLCR_EDL_MASK) {
+ for (i = 0; i < cf->len; i += 4) {
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ data[0] = priv->read_reg(priv,
(XCAN_RXMSG_2_FRAME_OFFSET(readindex) +
(dwindex * XCANFD_DW_BYTES)));
- else
- data[0] = priv->read_reg(priv,
+ else
+ data[0] = priv->read_reg(priv,
(XCAN_RXMSG_FRAME_OFFSET(readindex) +
- (dwindex * XCANFD_DW_BYTES)));
- *(__be32 *)(cf->data + i) =
- cpu_to_be32(data[0]);
- dwindex++;
- }
- } else {
- for (i = 0; i < cf->len; i += 4) {
- if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
- data[0] = priv->read_reg(priv,
- XCAN_RXMSG_2_FRAME_OFFSET(readindex) + i);
- else
- data[0] = priv->read_reg(priv,
- XCAN_RXMSG_FRAME_OFFSET(readindex) + i);
- *(__be32 *)(cf->data + i) =
- cpu_to_be32(data[0]);
- }
+ (dwindex * XCANFD_DW_BYTES)));
+ *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]);
+ dwindex++;
+ }
+ } else {
+ for (i = 0; i < cf->len; i += 4) {
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ data[0] = priv->read_reg(priv,
+ XCAN_RXMSG_2_FRAME_OFFSET(readindex) +
+ i);
+ else
+ data[0] = priv->read_reg(priv,
+ XCAN_RXMSG_FRAME_OFFSET(readindex) + i);
+ *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]);
}
- /* Update FSR Register so that next packet will save to
- * buffer
- */
- fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
- fsr |= XCAN_FSR_IRI_MASK;
- priv->write_reg(priv, XCAN_FSR_OFFSET, fsr);
- fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
- stats->rx_bytes += cf->len;
- stats->rx_packets++;
- netif_receive_skb(skb);
-
- return 1;
}
- /* If FSR Register is not updated with fill level */
- return 0;
+ stats->rx_bytes += cf->len;
+ stats->rx_packets++;
+ netif_receive_skb(skb);
+
+ return 1;
}
/**
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox