* RE: [PATCH v1] ocfs2/dlm: Move BITS_TO_BYTES() to bitops.h for wider use
From: Sudarsana Reddy Kalluru @ 2019-08-22 5:46 UTC (permalink / raw)
To: Andy Shevchenko, Joseph Qi
Cc: Mark Fasheh, Joel Becker, ocfs2-devel@oss.oracle.com, Ariel Elior,
GR-everest-linux-l2, David S. Miller, netdev@vger.kernel.org,
Colin Ian King
In-Reply-To: <20190821092541.GW30120@smile.fi.intel.com>
> -----Original Message-----
> From: netdev-owner@vger.kernel.org <netdev-owner@vger.kernel.org> On
> Behalf Of Andy Shevchenko
> Sent: Wednesday, August 21, 2019 2:56 PM
> To: Joseph Qi <joseph.qi@linux.alibaba.com>
> Cc: Mark Fasheh <mark@fasheh.com>; Joel Becker <jlbec@evilplan.org>;
> ocfs2-devel@oss.oracle.com; Ariel Elior <aelior@marvell.com>; Sudarsana
> Reddy Kalluru <skalluru@marvell.com>; GR-everest-linux-l2 <GR-everest-
> linux-l2@marvell.com>; David S. Miller <davem@davemloft.net>;
> netdev@vger.kernel.org; Colin Ian King <colin.king@canonical.com>
> Subject: Re: [PATCH v1] ocfs2/dlm: Move BITS_TO_BYTES() to bitops.h for
> wider use
>
> On Wed, Aug 21, 2019 at 09:29:04AM +0800, Joseph Qi wrote:
> > On 19/8/21 00:31, Andy Shevchenko wrote:
> > > There are users already and will be more of BITS_TO_BYTES() macro.
> > > Move it to bitops.h for wider use.
> > >
> > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > > ---
> > > drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 1 -
> > > fs/ocfs2/dlm/dlmcommon.h | 4 ----
> > > include/linux/bitops.h | 1 +
> > > 3 files changed, 1 insertion(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
> > > b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
> > > index 066765fbef06..0a59a09ef82f 100644
> > > --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
> > > +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
> > > @@ -296,7 +296,6 @@ static inline void bnx2x_dcb_config_qm(struct
> bnx2x *bp, enum cos_mode mode,
> > > * possible, the driver should only write the valid vnics into the internal
> > > * ram according to the appropriate port mode.
> > > */
> > > -#define BITS_TO_BYTES(x) ((x)/8)>
> > I don't think this is a equivalent replace, or it is in fact wrong
> > before?
>
> I was thinking about this one and there are two applications:
> - calculus of the amount of structures of certain type per PAGE
> (obviously off-by-one error in the original code IIUC purpose of
> STRUCT_SIZE)
> - calculus of some threshold based on line speed in bytes per second
> (I dunno it will have any difference on the Gbs / 100 MBs speeds)
>
I see that both the implementations (existing vs new) yield same value for standard speeds 10G (i.e.,10000), 1G (1000) that device supports. Hence the change look to be ok.
> > > /* CMNG constants, as derived from system spec calculations */
> > >
> > > diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h
> > > index aaf24548b02a..0463dce65bb2 100644
> > > --- a/fs/ocfs2/dlm/dlmcommon.h
> > > +++ b/fs/ocfs2/dlm/dlmcommon.h
> > > @@ -688,10 +688,6 @@ struct dlm_begin_reco
> > > __be32 pad2;
> > > };
> > >
> > > -
> > > -#define BITS_PER_BYTE 8
> > > -#define BITS_TO_BYTES(bits)
> > > (((bits)+BITS_PER_BYTE-1)/BITS_PER_BYTE)
> > > -
> > For ocfs2 part, it looks good to me.
> > Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
>
> Thanks!
>
> >
> > > struct dlm_query_join_request
> > > {
> > > u8 node_idx;
> > > diff --git a/include/linux/bitops.h b/include/linux/bitops.h index
> > > cf074bce3eb3..79d80f5ddf7b 100644
> > > --- a/include/linux/bitops.h
> > > +++ b/include/linux/bitops.h
> > > @@ -5,6 +5,7 @@
> > > #include <linux/bits.h>
> > >
> > > #define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
> > > +#define BITS_TO_BYTES(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE)
> > > #define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr,
> BITS_PER_TYPE(long))
> > >
> > > extern unsigned int __sw_hweight8(unsigned int w);
> > >
>
> --
> With Best Regards,
> Andy Shevchenko
>
^ permalink raw reply
* [PATCH net-next,v4, 1/6] PCI: hv: Add a paravirtual backchannel in software
From: Haiyang Zhang @ 2019-08-22 5:05 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org, Dexuan Cui, Jake Oshins
In-Reply-To: <1566450236-36757-1-git-send-email-haiyangz@microsoft.com>
From: Dexuan Cui <decui@microsoft.com>
Windows SR-IOV provides a backchannel mechanism in software for communication
between a VF driver and a PF driver. These "configuration blocks" are
similar in concept to PCI configuration space, but instead of doing reads and
writes in 32-bit chunks through a very slow path, packets of up to 128 bytes
can be sent or received asynchronously.
Nearly every SR-IOV device contains just such a communications channel in
hardware, so using this one in software is usually optional. Using the
software channel, however, allows driver implementers to leverage software
tools that fuzz the communications channel looking for vulnerabilities.
The usage model for these packets puts the responsibility for reading or
writing on the VF driver. The VF driver sends a read or a write packet,
indicating which "block" is being referred to by number.
If the PF driver wishes to initiate communication, it can "invalidate" one or
more of the first 64 blocks. This invalidation is delivered via a callback
supplied by the VF driver by this driver.
No protocol is implied, except that supplied by the PF and VF drivers.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
---
drivers/pci/controller/pci-hyperv.c | 302 ++++++++++++++++++++++++++++++++++++
include/linux/hyperv.h | 15 ++
2 files changed, 317 insertions(+)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 40b6254..57adeca 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -365,6 +365,39 @@ struct pci_delete_interrupt {
struct tran_int_desc int_desc;
} __packed;
+/*
+ * Note: the VM must pass a valid block id, wslot and bytes_requested.
+ */
+struct pci_read_block {
+ struct pci_message message_type;
+ u32 block_id;
+ union win_slot_encoding wslot;
+ u32 bytes_requested;
+} __packed;
+
+struct pci_read_block_response {
+ struct vmpacket_descriptor hdr;
+ u32 status;
+ u8 bytes[HV_CONFIG_BLOCK_SIZE_MAX];
+} __packed;
+
+/*
+ * Note: the VM must pass a valid block id, wslot and byte_count.
+ */
+struct pci_write_block {
+ struct pci_message message_type;
+ u32 block_id;
+ union win_slot_encoding wslot;
+ u32 byte_count;
+ u8 bytes[HV_CONFIG_BLOCK_SIZE_MAX];
+} __packed;
+
+struct pci_dev_inval_block {
+ struct pci_incoming_message incoming;
+ union win_slot_encoding wslot;
+ u64 block_mask;
+} __packed;
+
struct pci_dev_incoming {
struct pci_incoming_message incoming;
union win_slot_encoding wslot;
@@ -499,6 +532,9 @@ struct hv_pci_dev {
struct hv_pcibus_device *hbus;
struct work_struct wrk;
+ void (*block_invalidate)(void *context, u64 block_mask);
+ void *invalidate_context;
+
/*
* What would be observed if one wrote 0xFFFFFFFF to a BAR and then
* read it back, for each of the BAR offsets within config space.
@@ -817,6 +853,256 @@ static int hv_pcifront_write_config(struct pci_bus *bus, unsigned int devfn,
.write = hv_pcifront_write_config,
};
+/*
+ * Paravirtual backchannel
+ *
+ * Hyper-V SR-IOV provides a backchannel mechanism in software for
+ * communication between a VF driver and a PF driver. These
+ * "configuration blocks" are similar in concept to PCI configuration space,
+ * but instead of doing reads and writes in 32-bit chunks through a very slow
+ * path, packets of up to 128 bytes can be sent or received asynchronously.
+ *
+ * Nearly every SR-IOV device contains just such a communications channel in
+ * hardware, so using this one in software is usually optional. Using the
+ * software channel, however, allows driver implementers to leverage software
+ * tools that fuzz the communications channel looking for vulnerabilities.
+ *
+ * The usage model for these packets puts the responsibility for reading or
+ * writing on the VF driver. The VF driver sends a read or a write packet,
+ * indicating which "block" is being referred to by number.
+ *
+ * If the PF driver wishes to initiate communication, it can "invalidate" one or
+ * more of the first 64 blocks. This invalidation is delivered via a callback
+ * supplied by the VF driver by this driver.
+ *
+ * No protocol is implied, except that supplied by the PF and VF drivers.
+ */
+
+struct hv_read_config_compl {
+ struct hv_pci_compl comp_pkt;
+ void *buf;
+ unsigned int len;
+ unsigned int bytes_returned;
+};
+
+/**
+ * hv_pci_read_config_compl() - Invoked when a response packet
+ * for a read config block operation arrives.
+ * @context: Identifies the read config operation
+ * @resp: The response packet itself
+ * @resp_packet_size: Size in bytes of the response packet
+ */
+static void hv_pci_read_config_compl(void *context, struct pci_response *resp,
+ int resp_packet_size)
+{
+ struct hv_read_config_compl *comp = context;
+ struct pci_read_block_response *read_resp =
+ (struct pci_read_block_response *)resp;
+ unsigned int data_len, hdr_len;
+
+ hdr_len = offsetof(struct pci_read_block_response, bytes);
+ if (resp_packet_size < hdr_len) {
+ comp->comp_pkt.completion_status = -1;
+ goto out;
+ }
+
+ data_len = resp_packet_size - hdr_len;
+ if (data_len > 0 && read_resp->status == 0) {
+ comp->bytes_returned = min(comp->len, data_len);
+ memcpy(comp->buf, read_resp->bytes, comp->bytes_returned);
+ } else {
+ comp->bytes_returned = 0;
+ }
+
+ comp->comp_pkt.completion_status = read_resp->status;
+out:
+ complete(&comp->comp_pkt.host_event);
+}
+
+/**
+ * hv_read_config_block() - Sends a read config block request to
+ * the back-end driver running in the Hyper-V parent partition.
+ * @pdev: The PCI driver's representation for this device.
+ * @buf: Buffer into which the config block will be copied.
+ * @len: Size in bytes of buf.
+ * @block_id: Identifies the config block which has been requested.
+ * @bytes_returned: Size which came back from the back-end driver.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int hv_read_config_block(struct pci_dev *pdev, void *buf, unsigned int len,
+ unsigned int block_id, unsigned int *bytes_returned)
+{
+ struct hv_pcibus_device *hbus =
+ container_of(pdev->bus->sysdata, struct hv_pcibus_device,
+ sysdata);
+ struct {
+ struct pci_packet pkt;
+ char buf[sizeof(struct pci_read_block)];
+ } pkt;
+ struct hv_read_config_compl comp_pkt;
+ struct pci_read_block *read_blk;
+ int ret;
+
+ if (len == 0 || len > HV_CONFIG_BLOCK_SIZE_MAX)
+ return -EINVAL;
+
+ init_completion(&comp_pkt.comp_pkt.host_event);
+ comp_pkt.buf = buf;
+ comp_pkt.len = len;
+
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.pkt.completion_func = hv_pci_read_config_compl;
+ pkt.pkt.compl_ctxt = &comp_pkt;
+ read_blk = (struct pci_read_block *)&pkt.pkt.message;
+ read_blk->message_type.type = PCI_READ_BLOCK;
+ read_blk->wslot.slot = devfn_to_wslot(pdev->devfn);
+ read_blk->block_id = block_id;
+ read_blk->bytes_requested = len;
+
+ ret = vmbus_sendpacket(hbus->hdev->channel, read_blk,
+ sizeof(*read_blk), (unsigned long)&pkt.pkt,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ return ret;
+
+ ret = wait_for_response(hbus->hdev, &comp_pkt.comp_pkt.host_event);
+ if (ret)
+ return ret;
+
+ if (comp_pkt.comp_pkt.completion_status != 0 ||
+ comp_pkt.bytes_returned == 0) {
+ dev_err(&hbus->hdev->device,
+ "Read Config Block failed: 0x%x, bytes_returned=%d\n",
+ comp_pkt.comp_pkt.completion_status,
+ comp_pkt.bytes_returned);
+ return -EIO;
+ }
+
+ *bytes_returned = comp_pkt.bytes_returned;
+ return 0;
+}
+EXPORT_SYMBOL(hv_read_config_block);
+
+/**
+ * hv_pci_write_config_compl() - Invoked when a response packet for a write
+ * config block operation arrives.
+ * @context: Identifies the write config operation
+ * @resp: The response packet itself
+ * @resp_packet_size: Size in bytes of the response packet
+ */
+static void hv_pci_write_config_compl(void *context, struct pci_response *resp,
+ int resp_packet_size)
+{
+ struct hv_pci_compl *comp_pkt = context;
+
+ comp_pkt->completion_status = resp->status;
+ complete(&comp_pkt->host_event);
+}
+
+/**
+ * hv_write_config_block() - Sends a write config block request to the
+ * back-end driver running in the Hyper-V parent partition.
+ * @pdev: The PCI driver's representation for this device.
+ * @buf: Buffer from which the config block will be copied.
+ * @len: Size in bytes of buf.
+ * @block_id: Identifies the config block which is being written.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int hv_write_config_block(struct pci_dev *pdev, void *buf, unsigned int len,
+ unsigned int block_id)
+{
+ struct hv_pcibus_device *hbus =
+ container_of(pdev->bus->sysdata, struct hv_pcibus_device,
+ sysdata);
+ struct {
+ struct pci_packet pkt;
+ char buf[sizeof(struct pci_write_block)];
+ u32 reserved;
+ } pkt;
+ struct hv_pci_compl comp_pkt;
+ struct pci_write_block *write_blk;
+ u32 pkt_size;
+ int ret;
+
+ if (len == 0 || len > HV_CONFIG_BLOCK_SIZE_MAX)
+ return -EINVAL;
+
+ init_completion(&comp_pkt.host_event);
+
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.pkt.completion_func = hv_pci_write_config_compl;
+ pkt.pkt.compl_ctxt = &comp_pkt;
+ write_blk = (struct pci_write_block *)&pkt.pkt.message;
+ write_blk->message_type.type = PCI_WRITE_BLOCK;
+ write_blk->wslot.slot = devfn_to_wslot(pdev->devfn);
+ write_blk->block_id = block_id;
+ write_blk->byte_count = len;
+ memcpy(write_blk->bytes, buf, len);
+ pkt_size = offsetof(struct pci_write_block, bytes) + len;
+ /*
+ * This quirk is required on some hosts shipped around 2018, because
+ * these hosts don't check the pkt_size correctly (new hosts have been
+ * fixed since early 2019). The quirk is also safe on very old hosts
+ * and new hosts, because, on them, what really matters is the length
+ * specified in write_blk->byte_count.
+ */
+ pkt_size += sizeof(pkt.reserved);
+
+ ret = vmbus_sendpacket(hbus->hdev->channel, write_blk, pkt_size,
+ (unsigned long)&pkt.pkt, VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ return ret;
+
+ ret = wait_for_response(hbus->hdev, &comp_pkt.host_event);
+ if (ret)
+ return ret;
+
+ if (comp_pkt.completion_status != 0) {
+ dev_err(&hbus->hdev->device,
+ "Write Config Block failed: 0x%x\n",
+ comp_pkt.completion_status);
+ return -EIO;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(hv_write_config_block);
+
+/**
+ * hv_register_block_invalidate() - Invoked when a config block invalidation
+ * arrives from the back-end driver.
+ * @pdev: The PCI driver's representation for this device.
+ * @context: Identifies the device.
+ * @block_invalidate: Identifies all of the blocks being invalidated.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+int hv_register_block_invalidate(struct pci_dev *pdev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask))
+{
+ struct hv_pcibus_device *hbus =
+ container_of(pdev->bus->sysdata, struct hv_pcibus_device,
+ sysdata);
+ struct hv_pci_dev *hpdev;
+
+ hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
+ if (!hpdev)
+ return -ENODEV;
+
+ hpdev->block_invalidate = block_invalidate;
+ hpdev->invalidate_context = context;
+
+ put_pcichild(hpdev);
+ return 0;
+
+}
+EXPORT_SYMBOL(hv_register_block_invalidate);
+
/* Interrupt management hooks */
static void hv_int_desc_free(struct hv_pci_dev *hpdev,
struct tran_int_desc *int_desc)
@@ -1968,6 +2254,7 @@ static void hv_pci_onchannelcallback(void *context)
struct pci_response *response;
struct pci_incoming_message *new_message;
struct pci_bus_relations *bus_rel;
+ struct pci_dev_inval_block *inval;
struct pci_dev_incoming *dev_message;
struct hv_pci_dev *hpdev;
@@ -2045,6 +2332,21 @@ static void hv_pci_onchannelcallback(void *context)
}
break;
+ case PCI_INVALIDATE_BLOCK:
+
+ inval = (struct pci_dev_inval_block *)buffer;
+ hpdev = get_pcichild_wslot(hbus,
+ inval->wslot.slot);
+ if (hpdev) {
+ if (hpdev->block_invalidate) {
+ hpdev->block_invalidate(
+ hpdev->invalidate_context,
+ inval->block_mask);
+ }
+ put_pcichild(hpdev);
+ }
+ break;
+
default:
dev_warn(&hbus->hdev->device,
"Unimplemented protocol message %x\n",
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 6256cc3..9d37f8c 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1578,4 +1578,19 @@ struct vmpacket_descriptor *
for (pkt = hv_pkt_iter_first(channel); pkt; \
pkt = hv_pkt_iter_next(channel, pkt))
+/*
+ * Functions for passing data between SR-IOV PF and VF drivers. The VF driver
+ * sends requests to read and write blocks. Each block must be 128 bytes or
+ * smaller. Optionally, the VF driver can register a callback function which
+ * will be invoked when the host says that one or more of the first 64 block
+ * IDs is "invalid" which means that the VF driver should reread them.
+ */
+#define HV_CONFIG_BLOCK_SIZE_MAX 128
+int hv_read_config_block(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned);
+int hv_write_config_block(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id);
+int hv_register_block_invalidate(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask));
#endif /* _HYPERV_H */
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next,v4, 2/6] PCI: hv: Add a Hyper-V PCI interface driver for software backchannel interface
From: Haiyang Zhang @ 2019-08-22 5:05 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org
In-Reply-To: <1566450236-36757-1-git-send-email-haiyangz@microsoft.com>
This interface driver is a helper driver allows other drivers to
have a common interface with the Hyper-V PCI frontend driver.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
MAINTAINERS | 1 +
drivers/pci/Kconfig | 1 +
drivers/pci/controller/Kconfig | 7 ++++
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-hyperv-intf.c | 67 ++++++++++++++++++++++++++++++++
drivers/pci/controller/pci-hyperv.c | 12 ++++--
include/linux/hyperv.h | 30 ++++++++++----
7 files changed, 108 insertions(+), 11 deletions(-)
create mode 100644 drivers/pci/controller/pci-hyperv-intf.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a406947..9860853 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7469,6 +7469,7 @@ F: drivers/hid/hid-hyperv.c
F: drivers/hv/
F: drivers/input/serio/hyperv-keyboard.c
F: drivers/pci/controller/pci-hyperv.c
+F: drivers/pci/controller/pci-hyperv-intf.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
F: drivers/uio/uio_hv_generic.c
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ab9240..c313de9 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -182,6 +182,7 @@ config PCI_LABEL
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+ select PCI_HYPERV_INTERFACE
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index fe9f9f1..70e0782 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -281,5 +281,12 @@ config VMD
To compile this driver as a module, choose M here: the
module will be called vmd.
+config PCI_HYPERV_INTERFACE
+ tristate "Hyper-V PCI Interface"
+ depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+ help
+ The Hyper-V PCI Interface is a helper driver allows other drivers to
+ have a common interface with the Hyper-V PCI frontend driver.
+
source "drivers/pci/controller/dwc/Kconfig"
endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index d56a507..a2a22c9 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host.o
obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep.o
obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
+obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
diff --git a/drivers/pci/controller/pci-hyperv-intf.c b/drivers/pci/controller/pci-hyperv-intf.c
new file mode 100644
index 0000000..cc96be4
--- /dev/null
+++ b/drivers/pci/controller/pci-hyperv-intf.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Microsoft Corporation.
+ *
+ * Author:
+ * Haiyang Zhang <haiyangz@microsoft.com>
+ *
+ * This small module is a helper driver allows other drivers to
+ * have a common interface with the Hyper-V PCI frontend driver.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hyperv.h>
+
+struct hyperv_pci_block_ops hvpci_block_ops;
+EXPORT_SYMBOL_GPL(hvpci_block_ops);
+
+int hyperv_read_cfg_blk(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned)
+{
+ if (!hvpci_block_ops.read_block)
+ return -EOPNOTSUPP;
+
+ return hvpci_block_ops.read_block(dev, buf, buf_len, block_id,
+ bytes_returned);
+}
+EXPORT_SYMBOL_GPL(hyperv_read_cfg_blk);
+
+int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id)
+{
+ if (!hvpci_block_ops.write_block)
+ return -EOPNOTSUPP;
+
+ return hvpci_block_ops.write_block(dev, buf, len, block_id);
+}
+EXPORT_SYMBOL_GPL(hyperv_write_cfg_blk);
+
+int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask))
+{
+ if (!hvpci_block_ops.reg_blk_invalidate)
+ return -EOPNOTSUPP;
+
+ return hvpci_block_ops.reg_blk_invalidate(dev, context,
+ block_invalidate);
+}
+EXPORT_SYMBOL_GPL(hyperv_reg_block_invalidate);
+
+static void __exit exit_hv_pci_intf(void)
+{
+}
+
+static int __init init_hv_pci_intf(void)
+{
+ return 0;
+}
+
+module_init(init_hv_pci_intf);
+module_exit(exit_hv_pci_intf);
+
+MODULE_DESCRIPTION("Hyper-V PCI Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 57adeca..9c93ac2 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -983,7 +983,6 @@ int hv_read_config_block(struct pci_dev *pdev, void *buf, unsigned int len,
*bytes_returned = comp_pkt.bytes_returned;
return 0;
}
-EXPORT_SYMBOL(hv_read_config_block);
/**
* hv_pci_write_config_compl() - Invoked when a response packet for a write
@@ -1070,7 +1069,6 @@ int hv_write_config_block(struct pci_dev *pdev, void *buf, unsigned int len,
return 0;
}
-EXPORT_SYMBOL(hv_write_config_block);
/**
* hv_register_block_invalidate() - Invoked when a config block invalidation
@@ -1101,7 +1099,6 @@ int hv_register_block_invalidate(struct pci_dev *pdev, void *context,
return 0;
}
-EXPORT_SYMBOL(hv_register_block_invalidate);
/* Interrupt management hooks */
static void hv_int_desc_free(struct hv_pci_dev *hpdev,
@@ -3045,10 +3042,19 @@ static int hv_pci_remove(struct hv_device *hdev)
static void __exit exit_hv_pci_drv(void)
{
vmbus_driver_unregister(&hv_pci_drv);
+
+ hvpci_block_ops.read_block = NULL;
+ hvpci_block_ops.write_block = NULL;
+ hvpci_block_ops.reg_blk_invalidate = NULL;
}
static int __init init_hv_pci_drv(void)
{
+ /* Initialize PCI block r/w interface */
+ hvpci_block_ops.read_block = hv_read_config_block;
+ hvpci_block_ops.write_block = hv_write_config_block;
+ hvpci_block_ops.reg_blk_invalidate = hv_register_block_invalidate;
+
return vmbus_driver_register(&hv_pci_drv);
}
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 9d37f8c..2afe6fd 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1579,18 +1579,32 @@ struct vmpacket_descriptor *
pkt = hv_pkt_iter_next(channel, pkt))
/*
- * Functions for passing data between SR-IOV PF and VF drivers. The VF driver
+ * Interface for passing data between SR-IOV PF and VF drivers. The VF driver
* sends requests to read and write blocks. Each block must be 128 bytes or
* smaller. Optionally, the VF driver can register a callback function which
* will be invoked when the host says that one or more of the first 64 block
* IDs is "invalid" which means that the VF driver should reread them.
*/
#define HV_CONFIG_BLOCK_SIZE_MAX 128
-int hv_read_config_block(struct pci_dev *dev, void *buf, unsigned int buf_len,
- unsigned int block_id, unsigned int *bytes_returned);
-int hv_write_config_block(struct pci_dev *dev, void *buf, unsigned int len,
- unsigned int block_id);
-int hv_register_block_invalidate(struct pci_dev *dev, void *context,
- void (*block_invalidate)(void *context,
- u64 block_mask));
+
+int hyperv_read_cfg_blk(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned);
+int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id);
+int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask));
+
+struct hyperv_pci_block_ops {
+ int (*read_block)(struct pci_dev *dev, void *buf, unsigned int buf_len,
+ unsigned int block_id, unsigned int *bytes_returned);
+ int (*write_block)(struct pci_dev *dev, void *buf, unsigned int len,
+ unsigned int block_id);
+ int (*reg_blk_invalidate)(struct pci_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask));
+};
+
+extern struct hyperv_pci_block_ops hvpci_block_ops;
+
#endif /* _HYPERV_H */
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next,v4, 5/6] net/mlx5: Add HV VHCA control agent
From: Haiyang Zhang @ 2019-08-22 5:05 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org
In-Reply-To: <1566450236-36757-1-git-send-email-haiyangz@microsoft.com>
From: Eran Ben Elisha <eranbe@mellanox.com>
Control agent is responsible over of the control block (ID 0). It should
update the PF via this block about every capability change. In addition,
upon block 0 invalidate, it should activate all other supported agents
with data requests from the PF.
Upon agent create/destroy, the invalidate callback of the control agent
is being called in order to update the PF driver about this change.
The control agent is an integral part of HV VHCA and will be created
and destroy as part of the HV VHCA init/cleanup flow.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
---
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c | 122 ++++++++++++++++++++-
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h | 1 +
2 files changed, 121 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
index 84d1d75..4047629 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
@@ -109,22 +109,131 @@ void mlx5_hv_vhca_invalidate(void *context, u64 block_mask)
queue_work(hv_vhca->work_queue, &work->invalidate_work);
}
+#define AGENT_MASK(type) (type ? BIT(type - 1) : 0 /* control */)
+
+static void mlx5_hv_vhca_agents_control(struct mlx5_hv_vhca *hv_vhca,
+ struct mlx5_hv_vhca_control_block *block)
+{
+ int i;
+
+ for (i = 0; i < MLX5_HV_VHCA_AGENT_MAX; i++) {
+ struct mlx5_hv_vhca_agent *agent = hv_vhca->agents[i];
+
+ if (!agent || !agent->control)
+ continue;
+
+ if (!(AGENT_MASK(agent->type) & block->control))
+ continue;
+
+ agent->control(agent, block);
+ }
+}
+
+static void mlx5_hv_vhca_capabilities(struct mlx5_hv_vhca *hv_vhca,
+ u32 *capabilities)
+{
+ int i;
+
+ for (i = 0; i < MLX5_HV_VHCA_AGENT_MAX; i++) {
+ struct mlx5_hv_vhca_agent *agent = hv_vhca->agents[i];
+
+ if (agent)
+ *capabilities |= AGENT_MASK(agent->type);
+ }
+}
+
+static void
+mlx5_hv_vhca_control_agent_invalidate(struct mlx5_hv_vhca_agent *agent,
+ u64 block_mask)
+{
+ struct mlx5_hv_vhca *hv_vhca = agent->hv_vhca;
+ struct mlx5_core_dev *dev = hv_vhca->dev;
+ struct mlx5_hv_vhca_control_block *block;
+ u32 capabilities = 0;
+ int err;
+
+ block = kzalloc(sizeof(*block), GFP_KERNEL);
+ if (!block)
+ return;
+
+ err = mlx5_hv_read_config(dev, block, sizeof(*block), 0);
+ if (err)
+ goto free_block;
+
+ mlx5_hv_vhca_capabilities(hv_vhca, &capabilities);
+
+ /* In case no capabilities, send empty block in return */
+ if (!capabilities) {
+ memset(block, 0, sizeof(*block));
+ goto write;
+ }
+
+ if (block->capabilities != capabilities)
+ block->capabilities = capabilities;
+
+ if (block->control & ~capabilities)
+ goto free_block;
+
+ mlx5_hv_vhca_agents_control(hv_vhca, block);
+ block->command_ack = block->command;
+
+write:
+ mlx5_hv_write_config(dev, block, sizeof(*block), 0);
+
+free_block:
+ kfree(block);
+}
+
+static struct mlx5_hv_vhca_agent *
+mlx5_hv_vhca_control_agent_create(struct mlx5_hv_vhca *hv_vhca)
+{
+ return mlx5_hv_vhca_agent_create(hv_vhca, MLX5_HV_VHCA_AGENT_CONTROL,
+ NULL,
+ mlx5_hv_vhca_control_agent_invalidate,
+ NULL, NULL);
+}
+
+static void mlx5_hv_vhca_control_agent_destroy(struct mlx5_hv_vhca_agent *agent)
+{
+ mlx5_hv_vhca_agent_destroy(agent);
+}
+
int mlx5_hv_vhca_init(struct mlx5_hv_vhca *hv_vhca)
{
+ struct mlx5_hv_vhca_agent *agent;
+ int err;
+
if (IS_ERR_OR_NULL(hv_vhca))
return IS_ERR_OR_NULL(hv_vhca);
- return mlx5_hv_register_invalidate(hv_vhca->dev, hv_vhca,
- mlx5_hv_vhca_invalidate);
+ err = mlx5_hv_register_invalidate(hv_vhca->dev, hv_vhca,
+ mlx5_hv_vhca_invalidate);
+ if (err)
+ return err;
+
+ agent = mlx5_hv_vhca_control_agent_create(hv_vhca);
+ if (IS_ERR_OR_NULL(agent)) {
+ mlx5_hv_unregister_invalidate(hv_vhca->dev);
+ return IS_ERR_OR_NULL(agent);
+ }
+
+ hv_vhca->agents[MLX5_HV_VHCA_AGENT_CONTROL] = agent;
+
+ return 0;
}
void mlx5_hv_vhca_cleanup(struct mlx5_hv_vhca *hv_vhca)
{
+ struct mlx5_hv_vhca_agent *agent;
int i;
if (IS_ERR_OR_NULL(hv_vhca))
return;
+ agent = hv_vhca->agents[MLX5_HV_VHCA_AGENT_CONTROL];
+ if (agent)
+ mlx5_hv_vhca_control_agent_destroy(agent);
+
mutex_lock(&hv_vhca->agents_lock);
for (i = 0; i < MLX5_HV_VHCA_AGENT_MAX; i++)
WARN_ON(hv_vhca->agents[i]);
@@ -134,6 +243,11 @@ void mlx5_hv_vhca_cleanup(struct mlx5_hv_vhca *hv_vhca)
mlx5_hv_unregister_invalidate(hv_vhca->dev);
}
+static void mlx5_hv_vhca_agents_update(struct mlx5_hv_vhca *hv_vhca)
+{
+ mlx5_hv_vhca_invalidate(hv_vhca, BIT(MLX5_HV_VHCA_AGENT_CONTROL));
+}
+
struct mlx5_hv_vhca_agent *
mlx5_hv_vhca_agent_create(struct mlx5_hv_vhca *hv_vhca,
enum mlx5_hv_vhca_agent_type type,
@@ -174,6 +288,8 @@ struct mlx5_hv_vhca_agent *
hv_vhca->agents[type] = agent;
mutex_unlock(&hv_vhca->agents_lock);
+ mlx5_hv_vhca_agents_update(hv_vhca);
+
return agent;
}
@@ -195,6 +311,8 @@ void mlx5_hv_vhca_agent_destroy(struct mlx5_hv_vhca_agent *agent)
agent->cleanup(agent);
kfree(agent);
+
+ mlx5_hv_vhca_agents_update(hv_vhca);
}
static int mlx5_hv_vhca_data_block_prepare(struct mlx5_hv_vhca_agent *agent,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
index cdf1303..984e7ad 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
@@ -12,6 +12,7 @@
struct mlx5_hv_vhca_control_block;
enum mlx5_hv_vhca_agent_type {
+ MLX5_HV_VHCA_AGENT_CONTROL = 0,
MLX5_HV_VHCA_AGENT_MAX = 32,
};
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next,v4, 4/6] net/mlx5: Add HV VHCA infrastructure
From: Haiyang Zhang @ 2019-08-22 5:05 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org
In-Reply-To: <1566450236-36757-1-git-send-email-haiyangz@microsoft.com>
From: Eran Ben Elisha <eranbe@mellanox.com>
HV VHCA is a layer which provides PF to VF communication channel based on
HyperV PCI config channel. It implements Mellanox's Inter VHCA control
communication protocol. The protocol contains control block in order to
pass messages between the PF and VF drivers, and data blocks in order to
pass actual data.
The infrastructure is agent based. Each agent will be responsible of
contiguous buffer blocks in the VHCA config space. This infrastructure will
bind agents to their blocks, and those agents can only access read/write
the buffer blocks assigned to them. Each agent will provide three
callbacks (control, invalidate, cleanup). Control will be invoked when
block-0 is invalidated with a command that concerns this agent. Invalidate
callback will be invoked if one of the blocks assigned to this agent was
invalidated. Cleanup will be invoked before the agent is being freed in
order to clean all of its open resources or deferred works.
Block-0 serves as the control block. All execution commands from the PF
will be written by the PF over this block. VF will ack on those by
writing on block-0 as well. Its format is described by struct
mlx5_hv_vhca_control_block layout.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
---
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 2 +-
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c | 253 +++++++++++++++++++++
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h | 102 +++++++++
drivers/net/ethernet/mellanox/mlx5/core/main.c | 7 +
include/linux/mlx5/driver.h | 2 +
5 files changed, 365 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index fd32a5b..8d443fc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -45,7 +45,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o eswitch_offlo
mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
mlx5_core-$(CONFIG_VXLAN) += lib/vxlan.o
mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o
-mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += lib/hv.o
+mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += lib/hv.o lib/hv_vhca.o
#
# Ipoib netdev
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
new file mode 100644
index 0000000..84d1d75
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+// Copyright (c) 2018 Mellanox Technologies
+
+#include <linux/hyperv.h>
+#include "mlx5_core.h"
+#include "lib/hv.h"
+#include "lib/hv_vhca.h"
+
+struct mlx5_hv_vhca {
+ struct mlx5_core_dev *dev;
+ struct workqueue_struct *work_queue;
+ struct mlx5_hv_vhca_agent *agents[MLX5_HV_VHCA_AGENT_MAX];
+ struct mutex agents_lock; /* Protect agents array */
+};
+
+struct mlx5_hv_vhca_work {
+ struct work_struct invalidate_work;
+ struct mlx5_hv_vhca *hv_vhca;
+ u64 block_mask;
+};
+
+struct mlx5_hv_vhca_data_block {
+ u16 sequence;
+ u16 offset;
+ u8 reserved[4];
+ u64 data[15];
+};
+
+struct mlx5_hv_vhca_agent {
+ enum mlx5_hv_vhca_agent_type type;
+ struct mlx5_hv_vhca *hv_vhca;
+ void *priv;
+ u16 seq;
+ void (*control)(struct mlx5_hv_vhca_agent *agent,
+ struct mlx5_hv_vhca_control_block *block);
+ void (*invalidate)(struct mlx5_hv_vhca_agent *agent,
+ u64 block_mask);
+ void (*cleanup)(struct mlx5_hv_vhca_agent *agent);
+};
+
+struct mlx5_hv_vhca *mlx5_hv_vhca_create(struct mlx5_core_dev *dev)
+{
+ struct mlx5_hv_vhca *hv_vhca = NULL;
+
+ hv_vhca = kzalloc(sizeof(*hv_vhca), GFP_KERNEL);
+ if (!hv_vhca)
+ return ERR_PTR(-ENOMEM);
+
+ hv_vhca->work_queue = create_singlethread_workqueue("mlx5_hv_vhca");
+ if (!hv_vhca->work_queue) {
+ kfree(hv_vhca);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ hv_vhca->dev = dev;
+ mutex_init(&hv_vhca->agents_lock);
+
+ return hv_vhca;
+}
+
+void mlx5_hv_vhca_destroy(struct mlx5_hv_vhca *hv_vhca)
+{
+ if (IS_ERR_OR_NULL(hv_vhca))
+ return;
+
+ destroy_workqueue(hv_vhca->work_queue);
+ kfree(hv_vhca);
+}
+
+static void mlx5_hv_vhca_invalidate_work(struct work_struct *work)
+{
+ struct mlx5_hv_vhca_work *hwork;
+ struct mlx5_hv_vhca *hv_vhca;
+ int i;
+
+ hwork = container_of(work, struct mlx5_hv_vhca_work, invalidate_work);
+ hv_vhca = hwork->hv_vhca;
+
+ mutex_lock(&hv_vhca->agents_lock);
+ for (i = 0; i < MLX5_HV_VHCA_AGENT_MAX; i++) {
+ struct mlx5_hv_vhca_agent *agent = hv_vhca->agents[i];
+
+ if (!agent || !agent->invalidate)
+ continue;
+
+ if (!(BIT(agent->type) & hwork->block_mask))
+ continue;
+
+ agent->invalidate(agent, hwork->block_mask);
+ }
+ mutex_unlock(&hv_vhca->agents_lock);
+
+ kfree(hwork);
+}
+
+void mlx5_hv_vhca_invalidate(void *context, u64 block_mask)
+{
+ struct mlx5_hv_vhca *hv_vhca = (struct mlx5_hv_vhca *)context;
+ struct mlx5_hv_vhca_work *work;
+
+ work = kzalloc(sizeof(*work), GFP_ATOMIC);
+ if (!work)
+ return;
+
+ INIT_WORK(&work->invalidate_work, mlx5_hv_vhca_invalidate_work);
+ work->hv_vhca = hv_vhca;
+ work->block_mask = block_mask;
+
+ queue_work(hv_vhca->work_queue, &work->invalidate_work);
+}
+
+int mlx5_hv_vhca_init(struct mlx5_hv_vhca *hv_vhca)
+{
+ if (IS_ERR_OR_NULL(hv_vhca))
+ return IS_ERR_OR_NULL(hv_vhca);
+
+ return mlx5_hv_register_invalidate(hv_vhca->dev, hv_vhca,
+ mlx5_hv_vhca_invalidate);
+}
+
+void mlx5_hv_vhca_cleanup(struct mlx5_hv_vhca *hv_vhca)
+{
+ int i;
+
+ if (IS_ERR_OR_NULL(hv_vhca))
+ return;
+
+ mutex_lock(&hv_vhca->agents_lock);
+ for (i = 0; i < MLX5_HV_VHCA_AGENT_MAX; i++)
+ WARN_ON(hv_vhca->agents[i]);
+
+ mutex_unlock(&hv_vhca->agents_lock);
+
+ mlx5_hv_unregister_invalidate(hv_vhca->dev);
+}
+
+struct mlx5_hv_vhca_agent *
+mlx5_hv_vhca_agent_create(struct mlx5_hv_vhca *hv_vhca,
+ enum mlx5_hv_vhca_agent_type type,
+ void (*control)(struct mlx5_hv_vhca_agent*,
+ struct mlx5_hv_vhca_control_block *block),
+ void (*invalidate)(struct mlx5_hv_vhca_agent*,
+ u64 block_mask),
+ void (*cleaup)(struct mlx5_hv_vhca_agent *agent),
+ void *priv)
+{
+ struct mlx5_hv_vhca_agent *agent;
+
+ if (IS_ERR_OR_NULL(hv_vhca))
+ return ERR_PTR(-ENOMEM);
+
+ if (type >= MLX5_HV_VHCA_AGENT_MAX)
+ return ERR_PTR(-EINVAL);
+
+ mutex_lock(&hv_vhca->agents_lock);
+ if (hv_vhca->agents[type]) {
+ mutex_unlock(&hv_vhca->agents_lock);
+ return ERR_PTR(-EINVAL);
+ }
+ mutex_unlock(&hv_vhca->agents_lock);
+
+ agent = kzalloc(sizeof(*agent), GFP_KERNEL);
+ if (!agent)
+ return ERR_PTR(-ENOMEM);
+
+ agent->type = type;
+ agent->hv_vhca = hv_vhca;
+ agent->priv = priv;
+ agent->control = control;
+ agent->invalidate = invalidate;
+ agent->cleanup = cleaup;
+
+ mutex_lock(&hv_vhca->agents_lock);
+ hv_vhca->agents[type] = agent;
+ mutex_unlock(&hv_vhca->agents_lock);
+
+ return agent;
+}
+
+void mlx5_hv_vhca_agent_destroy(struct mlx5_hv_vhca_agent *agent)
+{
+ struct mlx5_hv_vhca *hv_vhca = agent->hv_vhca;
+
+ mutex_lock(&hv_vhca->agents_lock);
+
+ if (WARN_ON(agent != hv_vhca->agents[agent->type])) {
+ mutex_unlock(&hv_vhca->agents_lock);
+ return;
+ }
+
+ hv_vhca->agents[agent->type] = NULL;
+ mutex_unlock(&hv_vhca->agents_lock);
+
+ if (agent->cleanup)
+ agent->cleanup(agent);
+
+ kfree(agent);
+}
+
+static int mlx5_hv_vhca_data_block_prepare(struct mlx5_hv_vhca_agent *agent,
+ struct mlx5_hv_vhca_data_block *data_block,
+ void *src, int len, int *offset)
+{
+ int bytes = min_t(int, (int)sizeof(data_block->data), len);
+
+ data_block->sequence = agent->seq;
+ data_block->offset = (*offset)++;
+ memcpy(data_block->data, src, bytes);
+
+ return bytes;
+}
+
+static void mlx5_hv_vhca_agent_seq_update(struct mlx5_hv_vhca_agent *agent)
+{
+ agent->seq++;
+}
+
+int mlx5_hv_vhca_agent_write(struct mlx5_hv_vhca_agent *agent,
+ void *buf, int len)
+{
+ int offset = agent->type * HV_CONFIG_BLOCK_SIZE_MAX;
+ int block_offset = 0;
+ int total = 0;
+ int err;
+
+ while (len) {
+ struct mlx5_hv_vhca_data_block data_block = {0};
+ int bytes;
+
+ bytes = mlx5_hv_vhca_data_block_prepare(agent, &data_block,
+ buf + total,
+ len, &block_offset);
+ if (!bytes)
+ return -ENOMEM;
+
+ err = mlx5_hv_write_config(agent->hv_vhca->dev, &data_block,
+ sizeof(data_block), offset);
+ if (err)
+ return err;
+
+ total += bytes;
+ len -= bytes;
+ }
+
+ mlx5_hv_vhca_agent_seq_update(agent);
+
+ return 0;
+}
+
+void *mlx5_hv_vhca_agent_priv(struct mlx5_hv_vhca_agent *agent)
+{
+ return agent->priv;
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
new file mode 100644
index 0000000..cdf1303
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2019 Mellanox Technologies. */
+
+#ifndef __LIB_HV_VHCA_H__
+#define __LIB_HV_VHCA_H__
+
+#include "en.h"
+#include "lib/hv.h"
+
+struct mlx5_hv_vhca_agent;
+struct mlx5_hv_vhca;
+struct mlx5_hv_vhca_control_block;
+
+enum mlx5_hv_vhca_agent_type {
+ MLX5_HV_VHCA_AGENT_MAX = 32,
+};
+
+#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE)
+
+struct mlx5_hv_vhca_control_block {
+ u32 capabilities;
+ u32 control;
+ u16 command;
+ u16 command_ack;
+ u16 version;
+ u16 rings;
+ u32 reserved1[28];
+};
+
+struct mlx5_hv_vhca *mlx5_hv_vhca_create(struct mlx5_core_dev *dev);
+void mlx5_hv_vhca_destroy(struct mlx5_hv_vhca *hv_vhca);
+int mlx5_hv_vhca_init(struct mlx5_hv_vhca *hv_vhca);
+void mlx5_hv_vhca_cleanup(struct mlx5_hv_vhca *hv_vhca);
+void mlx5_hv_vhca_invalidate(void *context, u64 block_mask);
+
+struct mlx5_hv_vhca_agent *
+mlx5_hv_vhca_agent_create(struct mlx5_hv_vhca *hv_vhca,
+ enum mlx5_hv_vhca_agent_type type,
+ void (*control)(struct mlx5_hv_vhca_agent*,
+ struct mlx5_hv_vhca_control_block *block),
+ void (*invalidate)(struct mlx5_hv_vhca_agent*,
+ u64 block_mask),
+ void (*cleanup)(struct mlx5_hv_vhca_agent *agent),
+ void *context);
+
+void mlx5_hv_vhca_agent_destroy(struct mlx5_hv_vhca_agent *agent);
+int mlx5_hv_vhca_agent_write(struct mlx5_hv_vhca_agent *agent,
+ void *buf, int len);
+void *mlx5_hv_vhca_agent_priv(struct mlx5_hv_vhca_agent *agent);
+
+#else
+
+static inline struct mlx5_hv_vhca *
+mlx5_hv_vhca_create(struct mlx5_core_dev *dev)
+{
+ return NULL;
+}
+
+static inline void mlx5_hv_vhca_destroy(struct mlx5_hv_vhca *hv_vhca)
+{
+}
+
+static inline int mlx5_hv_vhca_init(struct mlx5_hv_vhca *hv_vhca)
+{
+ return 0;
+}
+
+static inline void mlx5_hv_vhca_cleanup(struct mlx5_hv_vhca *hv_vhca)
+{
+}
+
+static inline void mlx5_hv_vhca_invalidate(void *context,
+ u64 block_mask)
+{
+}
+
+static inline struct mlx5_hv_vhca_agent *
+mlx5_hv_vhca_agent_create(struct mlx5_hv_vhca *hv_vhca,
+ enum mlx5_hv_vhca_agent_type type,
+ void (*control)(struct mlx5_hv_vhca_agent*,
+ struct mlx5_hv_vhca_control_block *block),
+ void (*invalidate)(struct mlx5_hv_vhca_agent*,
+ u64 block_mask),
+ void (*cleanup)(struct mlx5_hv_vhca_agent *agent),
+ void *context)
+{
+ return NULL;
+}
+
+static inline void mlx5_hv_vhca_agent_destroy(struct mlx5_hv_vhca_agent *agent)
+{
+}
+
+static inline int
+mlx5_hv_vhca_write_agent(struct mlx5_hv_vhca_agent *agent,
+ void *buf, int len)
+{
+ return 0;
+}
+#endif
+
+#endif /* __LIB_HV_VHCA_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 0b70b1d..61388ca 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -69,6 +69,7 @@
#include "lib/pci_vsc.h"
#include "diag/fw_tracer.h"
#include "ecpf.h"
+#include "lib/hv_vhca.h"
MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>");
MODULE_DESCRIPTION("Mellanox 5th generation network adapters (ConnectX series) core driver");
@@ -870,6 +871,7 @@ static int mlx5_init_once(struct mlx5_core_dev *dev)
}
dev->tracer = mlx5_fw_tracer_create(dev);
+ dev->hv_vhca = mlx5_hv_vhca_create(dev);
return 0;
@@ -900,6 +902,7 @@ static int mlx5_init_once(struct mlx5_core_dev *dev)
static void mlx5_cleanup_once(struct mlx5_core_dev *dev)
{
+ mlx5_hv_vhca_destroy(dev->hv_vhca);
mlx5_fw_tracer_destroy(dev->tracer);
mlx5_fpga_cleanup(dev);
mlx5_eswitch_cleanup(dev->priv.eswitch);
@@ -1067,6 +1070,8 @@ static int mlx5_load(struct mlx5_core_dev *dev)
goto err_fw_tracer;
}
+ mlx5_hv_vhca_init(dev->hv_vhca);
+
err = mlx5_fpga_device_start(dev);
if (err) {
mlx5_core_err(dev, "fpga device start failed %d\n", err);
@@ -1122,6 +1127,7 @@ static int mlx5_load(struct mlx5_core_dev *dev)
err_ipsec_start:
mlx5_fpga_device_stop(dev);
err_fpga_start:
+ mlx5_hv_vhca_cleanup(dev->hv_vhca);
mlx5_fw_tracer_cleanup(dev->tracer);
err_fw_tracer:
mlx5_eq_table_destroy(dev);
@@ -1142,6 +1148,7 @@ static void mlx5_unload(struct mlx5_core_dev *dev)
mlx5_accel_ipsec_cleanup(dev);
mlx5_accel_tls_cleanup(dev);
mlx5_fpga_device_stop(dev);
+ mlx5_hv_vhca_cleanup(dev->hv_vhca);
mlx5_fw_tracer_cleanup(dev->tracer);
mlx5_eq_table_destroy(dev);
mlx5_irq_table_destroy(dev);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index df23f17..13b4cf2 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -659,6 +659,7 @@ struct mlx5_clock {
struct mlx5_fw_tracer;
struct mlx5_vxlan;
struct mlx5_geneve;
+struct mlx5_hv_vhca;
struct mlx5_core_dev {
struct device *device;
@@ -706,6 +707,7 @@ struct mlx5_core_dev {
struct mlx5_ib_clock_info *clock_info;
struct mlx5_fw_tracer *tracer;
u32 vsc_addr;
+ struct mlx5_hv_vhca *hv_vhca;
};
struct mlx5_db {
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next,v4, 6/6] net/mlx5e: Add mlx5e HV VHCA stats agent
From: Haiyang Zhang @ 2019-08-22 5:06 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org
In-Reply-To: <1566450236-36757-1-git-send-email-haiyangz@microsoft.com>
From: Eran Ben Elisha <eranbe@mellanox.com>
HV VHCA stats agent is responsible on running a preiodic rx/tx
packets/bytes stats update. Currently the supported format is version
MLX5_HV_VHCA_STATS_VERSION. Block ID 1 is dedicated for statistics data
transfer from the VF to the PF.
The reporter fetch the statistics data from all opened channels, fill it
in a buffer and send it to mlx5_hv_vhca_write_agent.
As the stats layer should include some metadata per block (sequence and
offset), the HV VHCA layer shall modify the buffer before actually send it
over block 1.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
---
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 1 +
drivers/net/ethernet/mellanox/mlx5/core/en.h | 13 ++
.../ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c | 162 +++++++++++++++++++++
.../ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h | 25 ++++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 +
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h | 1 +
6 files changed, 205 insertions(+)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index 8d443fc..f4de9cc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -36,6 +36,7 @@ mlx5_core-$(CONFIG_MLX5_CORE_EN_DCB) += en_dcbnl.o en/port_buffer.o
mlx5_core-$(CONFIG_MLX5_ESWITCH) += en_rep.o en_tc.o en/tc_tun.o lib/port_tun.o lag_mp.o \
lib/geneve.o en/tc_tun_vxlan.o en/tc_tun_gre.o \
en/tc_tun_geneve.o diag/en_tc_tracepoint.o
+mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += en/hv_vhca_stats.o
#
# Core extra
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 7316571..4467927 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -54,6 +54,7 @@
#include "mlx5_core.h"
#include "en_stats.h"
#include "en/fs.h"
+#include "lib/hv_vhca.h"
extern const struct net_device_ops mlx5e_netdev_ops;
struct page_pool;
@@ -782,6 +783,15 @@ struct mlx5e_modify_sq_param {
int rl_index;
};
+#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE)
+struct mlx5e_hv_vhca_stats_agent {
+ struct mlx5_hv_vhca_agent *agent;
+ struct delayed_work work;
+ u16 delay;
+ void *buf;
+};
+#endif
+
struct mlx5e_xsk {
/* UMEMs are stored separately from channels, because we don't want to
* lose them when channels are recreated. The kernel also stores UMEMs,
@@ -853,6 +863,9 @@ struct mlx5e_priv {
struct devlink_health_reporter *tx_reporter;
struct devlink_health_reporter *rx_reporter;
struct mlx5e_xsk xsk;
+#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE)
+ struct mlx5e_hv_vhca_stats_agent stats_agent;
+#endif
};
struct mlx5e_profile {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c
new file mode 100644
index 0000000..c37b4ac
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+// Copyright (c) 2018 Mellanox Technologies
+
+#include "en.h"
+#include "en/hv_vhca_stats.h"
+#include "lib/hv_vhca.h"
+#include "lib/hv.h"
+
+struct mlx5e_hv_vhca_per_ring_stats {
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 tx_packets;
+ u64 tx_bytes;
+};
+
+static void
+mlx5e_hv_vhca_fill_ring_stats(struct mlx5e_priv *priv, int ch,
+ struct mlx5e_hv_vhca_per_ring_stats *data)
+{
+ struct mlx5e_channel_stats *stats;
+ int tc;
+
+ stats = &priv->channel_stats[ch];
+ data->rx_packets = stats->rq.packets;
+ data->rx_bytes = stats->rq.bytes;
+
+ for (tc = 0; tc < priv->max_opened_tc; tc++) {
+ data->tx_packets += stats->sq[tc].packets;
+ data->tx_bytes += stats->sq[tc].bytes;
+ }
+}
+
+static void mlx5e_hv_vhca_fill_stats(struct mlx5e_priv *priv, u64 *data,
+ int buf_len)
+{
+ int ch, i = 0;
+
+ for (ch = 0; ch < priv->max_nch; ch++) {
+ u64 *buf = data + i;
+
+ if (WARN_ON_ONCE(buf +
+ sizeof(struct mlx5e_hv_vhca_per_ring_stats) >
+ data + buf_len))
+ return;
+
+ mlx5e_hv_vhca_fill_ring_stats(priv, ch,
+ (struct mlx5e_hv_vhca_per_ring_stats *)buf);
+ i += sizeof(struct mlx5e_hv_vhca_per_ring_stats) / sizeof(u64);
+ }
+}
+
+static int mlx5e_hv_vhca_stats_buf_size(struct mlx5e_priv *priv)
+{
+ return (sizeof(struct mlx5e_hv_vhca_per_ring_stats) *
+ priv->max_nch);
+}
+
+static void mlx5e_hv_vhca_stats_work(struct work_struct *work)
+{
+ struct mlx5e_hv_vhca_stats_agent *sagent;
+ struct mlx5_hv_vhca_agent *agent;
+ struct delayed_work *dwork;
+ struct mlx5e_priv *priv;
+ int buf_len, rc;
+ void *buf;
+
+ dwork = to_delayed_work(work);
+ sagent = container_of(dwork, struct mlx5e_hv_vhca_stats_agent, work);
+ priv = container_of(sagent, struct mlx5e_priv, stats_agent);
+ buf_len = mlx5e_hv_vhca_stats_buf_size(priv);
+ agent = sagent->agent;
+ buf = sagent->buf;
+
+ memset(buf, 0, buf_len);
+ mlx5e_hv_vhca_fill_stats(priv, buf, buf_len);
+
+ rc = mlx5_hv_vhca_agent_write(agent, buf, buf_len);
+ if (rc) {
+ mlx5_core_err(priv->mdev,
+ "%s: Failed to write stats, err = %d\n",
+ __func__, rc);
+ return;
+ }
+
+ if (sagent->delay)
+ queue_delayed_work(priv->wq, &sagent->work, sagent->delay);
+}
+
+enum {
+ MLX5_HV_VHCA_STATS_VERSION = 1,
+ MLX5_HV_VHCA_STATS_UPDATE_ONCE = 0xFFFF,
+};
+
+static void mlx5e_hv_vhca_stats_control(struct mlx5_hv_vhca_agent *agent,
+ struct mlx5_hv_vhca_control_block *block)
+{
+ struct mlx5e_hv_vhca_stats_agent *sagent;
+ struct mlx5e_priv *priv;
+
+ priv = mlx5_hv_vhca_agent_priv(agent);
+ sagent = &priv->stats_agent;
+
+ block->version = MLX5_HV_VHCA_STATS_VERSION;
+ block->rings = priv->max_nch;
+
+ if (!block->command) {
+ cancel_delayed_work_sync(&priv->stats_agent.work);
+ return;
+ }
+
+ sagent->delay = block->command == MLX5_HV_VHCA_STATS_UPDATE_ONCE ? 0 :
+ msecs_to_jiffies(block->command * 100);
+
+ queue_delayed_work(priv->wq, &sagent->work, sagent->delay);
+}
+
+static void mlx5e_hv_vhca_stats_cleanup(struct mlx5_hv_vhca_agent *agent)
+{
+ struct mlx5e_priv *priv = mlx5_hv_vhca_agent_priv(agent);
+
+ cancel_delayed_work_sync(&priv->stats_agent.work);
+}
+
+int mlx5e_hv_vhca_stats_create(struct mlx5e_priv *priv)
+{
+ int buf_len = mlx5e_hv_vhca_stats_buf_size(priv);
+ struct mlx5_hv_vhca_agent *agent;
+
+ priv->stats_agent.buf = kvzalloc(buf_len, GFP_KERNEL);
+ if (!priv->stats_agent.buf)
+ return -ENOMEM;
+
+ agent = mlx5_hv_vhca_agent_create(priv->mdev->hv_vhca,
+ MLX5_HV_VHCA_AGENT_STATS,
+ mlx5e_hv_vhca_stats_control, NULL,
+ mlx5e_hv_vhca_stats_cleanup,
+ priv);
+
+ if (IS_ERR_OR_NULL(agent)) {
+ if (IS_ERR(agent))
+ netdev_warn(priv->netdev,
+ "Failed to create hv vhca stats agent, err = %ld\n",
+ PTR_ERR(agent));
+
+ kfree(priv->stats_agent.buf);
+ return IS_ERR_OR_NULL(agent);
+ }
+
+ priv->stats_agent.agent = agent;
+ INIT_DELAYED_WORK(&priv->stats_agent.work, mlx5e_hv_vhca_stats_work);
+
+ return 0;
+}
+
+void mlx5e_hv_vhca_stats_destroy(struct mlx5e_priv *priv)
+{
+ if (IS_ERR_OR_NULL(priv->stats_agent.agent))
+ return;
+
+ mlx5_hv_vhca_agent_destroy(priv->stats_agent.agent);
+ kfree(priv->stats_agent.buf);
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h
new file mode 100644
index 0000000..664463f
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2019 Mellanox Technologies. */
+
+#ifndef __MLX5_EN_STATS_VHCA_H__
+#define __MLX5_EN_STATS_VHCA_H__
+#include "en.h"
+
+#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE)
+
+int mlx5e_hv_vhca_stats_create(struct mlx5e_priv *priv);
+void mlx5e_hv_vhca_stats_destroy(struct mlx5e_priv *priv);
+
+#else
+
+static inline int mlx5e_hv_vhca_stats_create(struct mlx5e_priv *priv)
+{
+ return 0;
+}
+
+static inline void mlx5e_hv_vhca_stats_destroy(struct mlx5e_priv *priv)
+{
+}
+#endif
+
+#endif /* __MLX5_EN_STATS_VHCA_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 7fdea64..fa4bf2d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -62,6 +62,7 @@
#include "en/xsk/setup.h"
#include "en/xsk/rx.h"
#include "en/xsk/tx.h"
+#include "en/hv_vhca_stats.h"
bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev)
@@ -5109,6 +5110,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv)
if (mlx5e_monitor_counter_supported(priv))
mlx5e_monitor_counter_init(priv);
+ mlx5e_hv_vhca_stats_create(priv);
if (netdev->reg_state != NETREG_REGISTERED)
return;
#ifdef CONFIG_MLX5_CORE_EN_DCB
@@ -5141,6 +5143,7 @@ static void mlx5e_nic_disable(struct mlx5e_priv *priv)
queue_work(priv->wq, &priv->set_rx_mode_work);
+ mlx5e_hv_vhca_stats_destroy(priv);
if (mlx5e_monitor_counter_supported(priv))
mlx5e_monitor_counter_cleanup(priv);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
index 984e7ad..4bad6a5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
@@ -13,6 +13,7 @@
enum mlx5_hv_vhca_agent_type {
MLX5_HV_VHCA_AGENT_CONTROL = 0,
+ MLX5_HV_VHCA_AGENT_STATS = 1,
MLX5_HV_VHCA_AGENT_MAX = 32,
};
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next,v4, 3/6] net/mlx5: Add wrappers for HyperV PCIe operations
From: Haiyang Zhang @ 2019-08-22 5:05 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org
In-Reply-To: <1566450236-36757-1-git-send-email-haiyangz@microsoft.com>
From: Eran Ben Elisha <eranbe@mellanox.com>
Add wrapper functions for HyperV PCIe read / write /
block_invalidate_register operations. This will be used as an
infrastructure in the downstream patch for software communication.
This will be enabled by default if CONFIG_PCI_HYPERV_INTERFACE is set.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
---
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 1 +
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c | 64 ++++++++++++++++++++++++
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h | 22 ++++++++
3 files changed, 87 insertions(+)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index bcf3655..fd32a5b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -45,6 +45,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o eswitch_offlo
mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
mlx5_core-$(CONFIG_VXLAN) += lib/vxlan.o
mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o
+mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += lib/hv.o
#
# Ipoib netdev
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
new file mode 100644
index 0000000..cf08d02
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+// Copyright (c) 2018 Mellanox Technologies
+
+#include <linux/hyperv.h>
+#include "mlx5_core.h"
+#include "lib/hv.h"
+
+static int mlx5_hv_config_common(struct mlx5_core_dev *dev, void *buf, int len,
+ int offset, bool read)
+{
+ int rc = -EOPNOTSUPP;
+ int bytes_returned;
+ int block_id;
+
+ if (offset % HV_CONFIG_BLOCK_SIZE_MAX || len % HV_CONFIG_BLOCK_SIZE_MAX)
+ return -EINVAL;
+
+ block_id = offset / HV_CONFIG_BLOCK_SIZE_MAX;
+
+ rc = read ?
+ hyperv_read_cfg_blk(dev->pdev, buf,
+ HV_CONFIG_BLOCK_SIZE_MAX, block_id,
+ &bytes_returned) :
+ hyperv_write_cfg_blk(dev->pdev, buf,
+ HV_CONFIG_BLOCK_SIZE_MAX, block_id);
+
+ /* Make sure len bytes were read successfully */
+ if (read)
+ rc |= !(len == bytes_returned);
+
+ if (rc) {
+ mlx5_core_err(dev, "Failed to %s hv config, err = %d, len = %d, offset = %d\n",
+ read ? "read" : "write", rc, len,
+ offset);
+ return rc;
+ }
+
+ return 0;
+}
+
+int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len,
+ int offset)
+{
+ return mlx5_hv_config_common(dev, buf, len, offset, true);
+}
+
+int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len,
+ int offset)
+{
+ return mlx5_hv_config_common(dev, buf, len, offset, false);
+}
+
+int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask))
+{
+ return hyperv_reg_block_invalidate(dev->pdev, context,
+ block_invalidate);
+}
+
+void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev)
+{
+ hyperv_reg_block_invalidate(dev->pdev, NULL, NULL);
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
new file mode 100644
index 0000000..f9a4557
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2019 Mellanox Technologies. */
+
+#ifndef __LIB_HV_H__
+#define __LIB_HV_H__
+
+#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE)
+
+#include <linux/hyperv.h>
+#include <linux/mlx5/driver.h>
+
+int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len,
+ int offset);
+int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len,
+ int offset);
+int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context,
+ void (*block_invalidate)(void *context,
+ u64 block_mask));
+void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev);
+#endif
+
+#endif /* __LIB_HV_H__ */
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next,v4, 0/6] Add software backchannel and mlx5e HV VHCA stats
From: Haiyang Zhang @ 2019-08-22 5:05 UTC (permalink / raw)
To: sashal@kernel.org, davem@davemloft.net, saeedm@mellanox.com,
leon@kernel.org, eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org
Cc: Haiyang Zhang, KY Srinivasan, Stephen Hemminger,
linux-kernel@vger.kernel.org
This patch set adds paravirtual backchannel in software in pci_hyperv,
which is required by the mlx5e driver HV VHCA stats agent.
The stats agent is responsible on running a periodic rx/tx packets/bytes
stats update.
Dexuan Cui (1):
PCI: hv: Add a paravirtual backchannel in software
Eran Ben Elisha (4):
net/mlx5: Add wrappers for HyperV PCIe operations
net/mlx5: Add HV VHCA infrastructure
net/mlx5: Add HV VHCA control agent
net/mlx5e: Add mlx5e HV VHCA stats agent
Haiyang Zhang (1):
PCI: hv: Add a Hyper-V PCI interface driver for software backchannel
interface
MAINTAINERS | 1 +
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 2 +
drivers/net/ethernet/mellanox/mlx5/core/en.h | 13 +
.../ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c | 162 +++++++++
.../ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h | 25 ++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 +
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c | 64 ++++
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h | 22 ++
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c | 371 +++++++++++++++++++++
.../net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h | 104 ++++++
drivers/net/ethernet/mellanox/mlx5/core/main.c | 7 +
drivers/pci/Kconfig | 1 +
drivers/pci/controller/Kconfig | 7 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-hyperv-intf.c | 67 ++++
drivers/pci/controller/pci-hyperv.c | 308 +++++++++++++++++
include/linux/hyperv.h | 29 ++
include/linux/mlx5/driver.h | 2 +
18 files changed, 1189 insertions(+)
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.h
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.c
create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
create mode 100644 drivers/pci/controller/pci-hyperv-intf.c
--
1.8.3.1
^ permalink raw reply
* RE: [PATCH net-next,v3, 0/6] Add software backchannel and mlx5e HV VHCA stats
From: Haiyang Zhang @ 2019-08-22 4:13 UTC (permalink / raw)
To: David Miller
Cc: sashal@kernel.org, saeedm@mellanox.com, leon@kernel.org,
eranbe@mellanox.com, lorenzo.pieralisi@arm.com,
bhelgaas@google.com, linux-pci@vger.kernel.org,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org,
KY Srinivasan, Stephen Hemminger, linux-kernel@vger.kernel.org
In-Reply-To: <20190821.210907.884869474698105971.davem@davemloft.net>
> -----Original Message-----
> From: linux-hyperv-owner@vger.kernel.org <linux-hyperv-
> owner@vger.kernel.org> On Behalf Of David Miller
> Sent: Wednesday, August 21, 2019 9:09 PM
> To: Haiyang Zhang <haiyangz@microsoft.com>
> Cc: sashal@kernel.org; saeedm@mellanox.com; leon@kernel.org;
> eranbe@mellanox.com; lorenzo.pieralisi@arm.com; bhelgaas@google.com;
> linux-pci@vger.kernel.org; linux-hyperv@vger.kernel.org;
> netdev@vger.kernel.org; KY Srinivasan <kys@microsoft.com>; Stephen
> Hemminger <sthemmin@microsoft.com>; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH net-next,v3, 0/6] Add software backchannel and mlx5e
> HV VHCA stats
>
> From: Haiyang Zhang <haiyangz@microsoft.com>
> Date: Wed, 21 Aug 2019 00:23:19 +0000
>
> > This patch set adds paravirtual backchannel in software in pci_hyperv,
> > which is required by the mlx5e driver HV VHCA stats agent.
> >
> > The stats agent is responsible on running a periodic rx/tx
> > packets/bytes stats update.
>
> These patches don't apply cleanly to net-next, probably due to some recent
> mlx5 driver changes.
>
> Please respin.
I will do.
Thanks,
- Haiyang
^ permalink raw reply
* Re: [PATCH net-next,v3, 0/6] Add software backchannel and mlx5e HV VHCA stats
From: David Miller @ 2019-08-22 4:09 UTC (permalink / raw)
To: haiyangz
Cc: sashal, saeedm, leon, eranbe, lorenzo.pieralisi, bhelgaas,
linux-pci, linux-hyperv, netdev, kys, sthemmin, linux-kernel
In-Reply-To: <1566346948-69497-1-git-send-email-haiyangz@microsoft.com>
From: Haiyang Zhang <haiyangz@microsoft.com>
Date: Wed, 21 Aug 2019 00:23:19 +0000
> This patch set adds paravirtual backchannel in software in pci_hyperv,
> which is required by the mlx5e driver HV VHCA stats agent.
>
> The stats agent is responsible on running a periodic rx/tx packets/bytes
> stats update.
These patches don't apply cleanly to net-next, probably due to some recent
mlx5 driver changes.
Please respin.
^ permalink raw reply
* Re: [PATCH 1/2] net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run
From: David Miller @ 2019-08-22 4:06 UTC (permalink / raw)
To: julietk; +Cc: netdev, linuxppc-dev
In-Reply-To: <20190820213120.19880-1-julietk@linux.vnet.ibm.com>
From: Juliet Kim <julietk@linux.vnet.ibm.com>
Date: Tue, 20 Aug 2019 17:31:19 -0400
> Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset")
> made the change to hold the RTNL lock during a reset to avoid deadlock
> but linkwatch_event is fired during the reset and needs the RTNL lock.
> That keeps linkwatch_event process from proceeding until the reset
> is complete. The reset process cannot tolerate the linkwatch_event
> processing after reset completes, so release the RTNL lock during the
> process to allow a chance for linkwatch_event to run during reset.
> This does not guarantee that the linkwatch_event will be processed as
> soon as link state changes, but is an improvement over the current code
> where linkwatch_event processing is always delayed, which prevents
> transmissions on the device from being deactivated leading transmit
> watchdog timer to time-out.
>
> Release the RTNL lock before link state change and re-acquire after
> the link state change to allow linkwatch_event to grab the RTNL lock
> and run during the reset.
>
> Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset")
> Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Conditional locking, especialy such extensive use of conditional
locking as is being done here, is strongly discouraged and is always
indicative of bad design.
Please try to rework this change such that the code paths that want
to lock things a certain way are %100 segregated functionally into
different code paths and functions.
Or feel free to find a cleaner way to fix this.
^ permalink raw reply
* Re: [PATCH] selftests: net: add missing NFT_FWD_NETDEV to config
From: David Miller @ 2019-08-22 4:04 UTC (permalink / raw)
To: anders.roxell; +Cc: shuah, netdev, linux-kselftest, linux-kernel
In-Reply-To: <20190820134102.25636-1-anders.roxell@linaro.org>
From: Anders Roxell <anders.roxell@linaro.org>
Date: Tue, 20 Aug 2019 15:41:02 +0200
> When running xfrm_policy.sh we see the following
>
> # sysctl cannot stat /proc/sys/net/ipv4/conf/eth1/forwarding No such file or directory
> cannot: stat_/proc/sys/net/ipv4/conf/eth1/forwarding #
I don't understand how a netfilter config options is going to make that
generic ipv4 protocol per-device sysctl appear.
If it's unrelated to your change, don't include it in the commit message
as it is confusing.
Thank you.
^ permalink raw reply
* Re: [PATCH net-next v2] net: openvswitch: Set OvS recirc_id from tc chain index
From: David Miller @ 2019-08-22 3:57 UTC (permalink / raw)
To: paulb
Cc: pshelar, netdev, jpettit, simon.horman, marcelo.leitner, vladbu,
jiri, roid, yossiku, ronye, ozsh
In-Reply-To: <1566304251-15795-1-git-send-email-paulb@mellanox.com>
From: Paul Blakey <paulb@mellanox.com>
Date: Tue, 20 Aug 2019 15:30:51 +0300
> @@ -4050,6 +4060,9 @@ enum skb_ext_id {
> #ifdef CONFIG_XFRM
> SKB_EXT_SEC_PATH,
> #endif
> +#if IS_ENABLED(CONFIG_NET_TC_SKB_EXT)
> + TC_SKB_EXT,
> +#endif
> SKB_EXT_NUM, /* must be last */
> };
Sorry, no.
The SKB extensions are not a dumping ground for people to use when they can't
figure out another more reasonable place to put their values. Try to use
the normal cb[], and if you can't you must explain in exhaustive detail
why you cannot in any way whatsoever make that work.
Again, SKB extensions are not a dumping ground.
^ permalink raw reply
* Re: New skb extension for use by LSMs (skb "security blob")?
From: David Miller @ 2019-08-22 3:54 UTC (permalink / raw)
To: paul; +Cc: netdev, linux-security-module, selinux
In-Reply-To: <CAHC9VhRLexftb5mK8_izVQkv9w46m=aPukws2d2m+yrMvHUF_g@mail.gmail.com>
From: Paul Moore <paul@paul-moore.com>
Date: Wed, 21 Aug 2019 23:27:03 -0400
> On Wed, Aug 21, 2019 at 6:50 PM David Miller <davem@davemloft.net> wrote:
>> From: Paul Moore <paul@paul-moore.com>
>> Date: Wed, 21 Aug 2019 18:00:09 -0400
>>
>> > I was just made aware of the skb extension work, and it looks very
>> > appealing from a LSM perspective. As some of you probably remember,
>> > we (the LSM folks) have wanted a proper security blob in the skb for
>> > quite some time, but netdev has been resistant to this idea thus far.
>> >
>> > If I were to propose a patchset to add a SKB_EXT_SECURITY skb
>> > extension (a single extension ID to be shared among the different
>> > LSMs), would that be something that netdev would consider merging, or
>> > is there still a philosophical objection to things like this?
>>
>> Unlike it's main intended user (MPTCP), it sounds like LSM's would use
>> this in a way such that it would be enabled on most systems all the
>> time.
>>
>> That really defeats the whole purpose of making it dynamic. :-/
>
> I would be okay with only adding a skb extension when we needed it,
> which I'm currently thinking would only be when we had labeled
> networking actually configured at runtime and not just built into the
> kernel. In SELinux we do something similar today when it comes to our
> per-packet access controls; if labeled networking is not configured we
> bail out of the LSM hooks early to improve performance (we would just
> be comparing unlabeled_t to unlabeled_t anyway). I think the other
> LSMs would be okay with this usage as well.
>
> While a number of distros due enable some form of LSM and the labeled
> networking bits at build time, vary few (if any?) provide a default
> configuration so I would expect no additional overhead in the common
> case.
>
> Would that be acceptable?
I honestly don't know, I kinda feared that once the SKB extension went in
people would start dumping things there and that's exactly what's happening.
I just so happened to be reviewing:
https://patchwork.ozlabs.org/patch/1150091/
while you were writing this email.
It's rediculous, the vultures are out.
^ permalink raw reply
* Re: [PATCH v2 net] gve: Copy and paste bug in gve_get_stats()
From: David Miller @ 2019-08-22 3:50 UTC (permalink / raw)
To: dan.carpenter
Cc: csully, sagis, jonolson, willemb, lrizzo, hslester96, netdev,
kernel-janitors
In-Reply-To: <20190820090739.GB1845@kadam>
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 20 Aug 2019 12:11:44 +0300
> There is a copy and paste error so we have "rx" where "tx" was intended
> in the priv->tx[] array.
>
> Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> v2: fix a typo in the subject: buy -> bug (Thanks Walter Harms)
Applied, thanks.
^ permalink raw reply
* Re: [PATCH net-next v3 0/4] Improve phc2sys precision for mv88e6xxx switch in combination with imx6-fec
From: David Miller @ 2019-08-22 3:49 UTC (permalink / raw)
To: h.feurstein
Cc: netdev, linux-kernel, andrew, richardcochran, mlichvar,
vivien.didelot, f.fainelli, hkallweit1, olteanv, fugang.duan
In-Reply-To: <20190820084833.6019-1-hubert.feurstein@vahle.at>
From: Hubert Feurstein <h.feurstein@gmail.com>
Date: Tue, 20 Aug 2019 10:48:29 +0200
> From: Hubert Feurstein <h.feurstein@gmail.com>
>
> Changelog:
> v3: mv88e6xxx_smi_indirect_write: forward ptp_sts only on the last write
> Copied Miroslav Lichvar because of PTP offset compensation patch
> v2: Added patch for PTP offset compensation
> Removed mdiobus_write_sts as there was no user
> Removed ptp_sts_supported-boolean and introduced flags instead
>
> With this patchset the phc2sys synchronisation precision improved to +/-555ns on
> an IMX6DL with an MV88E6220 switch attached.
>
> This patchset takes into account the comments from the following discussions:
> - https://lkml.org/lkml/2019/8/2/1364
> - https://lkml.org/lkml/2019/8/5/169
>
> Patch 01 adds the required infrastructure in the MDIO layer.
> Patch 02 adds additional PTP offset compensation.
> Patch 03 adds support for the PTP_SYS_OFFSET_EXTENDED ioctl in the mv88e6xxx driver.
> Patch 04 adds support for the PTP system timestamping in the imx-fec driver.
It looks like there is still some active discussion about these changes and
there will likely be another spin.
^ permalink raw reply
* Re: [PATCH] net: fix icmp_socket_deliver argument 2 input
From: David Miller @ 2019-08-22 3:43 UTC (permalink / raw)
To: lirongqing; +Cc: netdev
In-Reply-To: <1566269160-11031-1-git-send-email-lirongqing@baidu.com>
From: Li RongQing <lirongqing@baidu.com>
Date: Tue, 20 Aug 2019 10:46:00 +0800
> it expects a unsigned int, but got a __be32
>
> Signed-off-by: Li RongQing <lirongqing@baidu.com>
> Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Applied, but this causes no functional problems because all of the
per-protocol handlers ignore the info argument for redirects.
^ permalink raw reply
* Re: [PATCHv2 net] ipv6/addrconf: allow adding multicast addr if IFA_F_MCAUTOJOIN is set
From: David Miller @ 2019-08-22 3:40 UTC (permalink / raw)
To: liuhangbin; +Cc: netdev, challa, dsahern, jishi
In-Reply-To: <20190820021947.22718-1-liuhangbin@gmail.com>
From: Hangbin Liu <liuhangbin@gmail.com>
Date: Tue, 20 Aug 2019 10:19:47 +0800
> In commit 93a714d6b53d ("multicast: Extend ip address command to enable
> multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN
> to make user able to add multicast address on ethernet interface.
>
> This works for IPv4, but not for IPv6. See the inet6_addr_add code.
>
> static int inet6_addr_add()
> {
> ...
> if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
> ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...)
> }
>
> ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr
> if (!IS_ERR(ifp)) {
> ...
> } else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
> ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...)
> }
> }
>
> But in ipv6_add_addr() it will check the address type and reject multicast
> address directly. So this feature is never worked for IPv6.
>
> We should not remove the multicast address check totally in ipv6_add_addr(),
> but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied.
>
> v2: update commit description
>
> Reported-by: Jianlin Shi <jishi@redhat.com>
> Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on")
> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Applied and queued up for -stable.
^ permalink raw reply
* Re: [PATCH net] net: dsa: bcm_sf2: Do not configure PHYLINK on CPU port
From: David Miller @ 2019-08-22 3:35 UTC (permalink / raw)
To: f.fainelli; +Cc: netdev, andrew, vivien.didelot, linux-kernel
In-Reply-To: <20190822000747.3036-1-f.fainelli@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 21 Aug 2019 17:07:46 -0700
> The SF2 binding does not specify that the CPU port should have
> properties mandatory for successfully instantiating a PHYLINK object. As
> such, there will be missing properties (including fixed-link) and when
> attempting to validate and later configure link modes, we will have an
> incorrect set of parameters (interface, speed, duplex).
>
> Simply prevent the CPU port from being configured through PHYLINK since
> bcm_sf2_imp_setup() takes care of that already.
>
> Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports")
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Applied, thanks Florian.
^ permalink raw reply
* Re: [PATCH net-next 01/10] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler
From: Marek Behún @ 2019-08-22 3:33 UTC (permalink / raw)
To: David Miller; +Cc: netdev, andrew, vivien.didelot, f.fainelli, olteanv
In-Reply-To: <20190821.202542.800433879227385529.davem@davemloft.net>
On Wed, 21 Aug 2019 20:25:42 -0700 (PDT)
David Miller <davem@davemloft.net> wrote:
> From: Marek Behún <marek.behun@nic.cz>
> Date: Thu, 22 Aug 2019 01:27:15 +0200
>
> > int port, int lane) {
> > struct dsa_switch *ds = chip->ds;
> > + u8 cmode = chip->ports[port].cmode;
> > int duplex = DUPLEX_UNKNOWN;
> > int speed = SPEED_UNKNOWN;
> > int link, err;
> > + phy_interface_t mode;
> > u16 status;
>
> Please retain the reverse christmas tree ordering of local variables
> here.
>
> Thank you.
:DDDDDDDDDDDDDDDDDD
Okay, I shall do so in next version.
^ permalink raw reply
* Re: KMSAN: uninit-value in rtm_new_nexthop
From: David Ahern @ 2019-08-22 3:31 UTC (permalink / raw)
To: syzbot, davem, dsahern, glider, kuznet, linux-kernel, netdev,
syzkaller-bugs, yoshfuji
In-Reply-To: <000000000000276f580590a83ac2@google.com>
On 8/21/19 6:38 PM, syzbot wrote:
> ==================================================================
> BUG: KMSAN: uninit-value in rtm_to_nh_config net/ipv4/nexthop.c:1317
> [inline]
> BUG: KMSAN: uninit-value in rtm_new_nexthop+0x447/0x98e0
> net/ipv4/nexthop.c:1474
I believed this is fixed in net by commit:
Author: David Ahern <dsahern@gmail.com>
Date: Mon Aug 12 13:07:07 2019 -0700
netlink: Fix nlmsg_parse as a wrapper for strict message parsing
^ permalink raw reply
* Re: New skb extension for use by LSMs (skb "security blob")?
From: Paul Moore @ 2019-08-22 3:27 UTC (permalink / raw)
To: David Miller; +Cc: netdev, linux-security-module, selinux
In-Reply-To: <20190821.155013.1723892743521935274.davem@davemloft.net>
On Wed, Aug 21, 2019 at 6:50 PM David Miller <davem@davemloft.net> wrote:
> From: Paul Moore <paul@paul-moore.com>
> Date: Wed, 21 Aug 2019 18:00:09 -0400
>
> > I was just made aware of the skb extension work, and it looks very
> > appealing from a LSM perspective. As some of you probably remember,
> > we (the LSM folks) have wanted a proper security blob in the skb for
> > quite some time, but netdev has been resistant to this idea thus far.
> >
> > If I were to propose a patchset to add a SKB_EXT_SECURITY skb
> > extension (a single extension ID to be shared among the different
> > LSMs), would that be something that netdev would consider merging, or
> > is there still a philosophical objection to things like this?
>
> Unlike it's main intended user (MPTCP), it sounds like LSM's would use
> this in a way such that it would be enabled on most systems all the
> time.
>
> That really defeats the whole purpose of making it dynamic. :-/
I would be okay with only adding a skb extension when we needed it,
which I'm currently thinking would only be when we had labeled
networking actually configured at runtime and not just built into the
kernel. In SELinux we do something similar today when it comes to our
per-packet access controls; if labeled networking is not configured we
bail out of the LSM hooks early to improve performance (we would just
be comparing unlabeled_t to unlabeled_t anyway). I think the other
LSMs would be okay with this usage as well.
While a number of distros due enable some form of LSM and the labeled
networking bits at build time, vary few (if any?) provide a default
configuration so I would expect no additional overhead in the common
case.
Would that be acceptable?
--
paul moore
www.paul-moore.com
^ permalink raw reply
* Re: [PATCH net-next 08/10] net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot
From: David Miller @ 2019-08-22 3:26 UTC (permalink / raw)
To: marek.behun; +Cc: netdev, andrew, vivien.didelot, f.fainelli, olteanv
In-Reply-To: <20190821232724.1544-9-marek.behun@nic.cz>
From: Marek Behún <marek.behun@nic.cz>
Date: Thu, 22 Aug 2019 01:27:22 +0200
> int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
> {
> int lane;
> + u8 cmode = chip->ports[port].cmode;
Reverse christmas tree please.
^ permalink raw reply
* Re: [PATCH net-next 01/10] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler
From: David Miller @ 2019-08-22 3:25 UTC (permalink / raw)
To: marek.behun; +Cc: netdev, andrew, vivien.didelot, f.fainelli, olteanv
In-Reply-To: <20190821232724.1544-2-marek.behun@nic.cz>
From: Marek Behún <marek.behun@nic.cz>
Date: Thu, 22 Aug 2019 01:27:15 +0200
> diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
> index 20c526c2a9ee..0f3d7cbb696b 100644
> --- a/drivers/net/dsa/mv88e6xxx/serdes.c
> +++ b/drivers/net/dsa/mv88e6xxx/serdes.c
> @@ -506,9 +506,11 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
> int port, int lane)
> {
> struct dsa_switch *ds = chip->ds;
> + u8 cmode = chip->ports[port].cmode;
> int duplex = DUPLEX_UNKNOWN;
> int speed = SPEED_UNKNOWN;
> int link, err;
> + phy_interface_t mode;
> u16 status;
Please retain the reverse christmas tree ordering of local variables here.
Thank you.
^ permalink raw reply
* Re: [pull request][net-next 00/11] Mellanox, mlx5 tc flow handling for concurrent execution (Part 3/3)
From: David Miller @ 2019-08-22 3:23 UTC (permalink / raw)
To: saeedm; +Cc: netdev
In-Reply-To: <20190821232806.21847-1-saeedm@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Date: Wed, 21 Aug 2019 23:28:31 +0000
> This series, mostly from Vlad, is the 3rd and last part of 3 part series
> to improve mlx5 tc flow handling by removing dependency on rtnl_lock and
> providing a more fine-grained locking and rcu safe data structures to
> allow tc flow handling for concurrent execution.
>
> 2) In this part Vlad handles mlx5e neigh offloads for concurrent
> execution.
>
> 2) Vlad with Dmytro's help, They add 3 new mlx5 tracepoints to track mlx5
> tc flower requests and neigh updates.
>
> 3) Added mlx5 documentation for the new tracepoints.
>
> For more information please see tag log below.
>
> Please pull and let me know if there is any problem.
I reviewed this a few times, looks good.
Pulled, thanks.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox