* skge wake on lan failing
@ 2006-06-14 21:10 Sitsofe Wheeler
2006-06-15 21:38 ` Stephen Hemminger
0 siblings, 1 reply; 2+ messages in thread
From: Sitsofe Wheeler @ 2006-06-14 21:10 UTC (permalink / raw)
To: netdev
Hello,
We have a bunch of PCI D-Link System Inc DGE-530T Gigabit Ethernet cards
which use the skge driver. However, the link light for a given card goes
off at the switch during a suspend to ram or power down even though an
"ethtool -s eth0 wol g" has been issued.
Can anyone shed any light on the problem?
--
Sitsofe | http://sucs.org/~sits/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: skge wake on lan failing
2006-06-14 21:10 skge wake on lan failing Sitsofe Wheeler
@ 2006-06-15 21:38 ` Stephen Hemminger
0 siblings, 0 replies; 2+ messages in thread
From: Stephen Hemminger @ 2006-06-15 21:38 UTC (permalink / raw)
To: Sitsofe Wheeler; +Cc: netdev
On Wed, 14 Jun 2006 22:10:26 +0100
Sitsofe Wheeler <sitsofe@yahoo.com> wrote:
> Hello,
>
> We have a bunch of PCI D-Link System Inc DGE-530T Gigabit Ethernet cards
> which use the skge driver. However, the link light for a given card goes
> off at the switch during a suspend to ram or power down even though an
> "ethtool -s eth0 wol g" has been issued.
>
> Can anyone shed any light on the problem?
The driver hasn't been tested with Wol. Since I can't get suspend to RAM
work on any of the systems with the board, it has been hard to test.
I'll get to it, but it hasn't been high priority.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-06-15 21:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-14 21:10 skge wake on lan failing Sitsofe Wheeler
2006-06-15 21:38 ` Stephen Hemminger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).