From: Florian Westphal <fw@strlen.de>
To: netfilter-devel@vger.kernel.org
Cc: Florian Westphal <fw@strlen.de>
Subject: [PATCH v2] netfilter: ebt_ip6: allow matching on ipv6-icmp types/codes
Date: Mon, 20 Dec 2010 15:57:47 +0100 [thread overview]
Message-ID: <1292857067-1595-1-git-send-email-fw@strlen.de> (raw)
To avoid adding a new match revision icmp type/code are stored
in the sport/dport area.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Holger Eitzenberger <holger@eitzenberger.org>
---
Changes since v1:
- use u16 where appropriate
- use proper () in if condition
- renamed _ports to _pkthdr
- add comment that sizeof(_pktheader) is also ok in ICMP6 case.
include/linux/netfilter_bridge/ebt_ip6.h | 15 ++++++++--
net/bridge/netfilter/ebt_ip6.c | 46 ++++++++++++++++++++++--------
2 files changed, 46 insertions(+), 15 deletions(-)
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
index e5de987..22af18a 100644
--- a/include/linux/netfilter_bridge/ebt_ip6.h
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -18,8 +18,11 @@
#define EBT_IP6_PROTO 0x08
#define EBT_IP6_SPORT 0x10
#define EBT_IP6_DPORT 0x20
+#define EBT_IP6_ICMP6 0x40
+
#define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\
- EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT)
+ EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT | \
+ EBT_IP6_ICMP6)
#define EBT_IP6_MATCH "ip6"
/* the same values are used for the invflags */
@@ -32,8 +35,14 @@ struct ebt_ip6_info {
uint8_t protocol;
uint8_t bitmask;
uint8_t invflags;
- uint16_t sport[2];
- uint16_t dport[2];
+ union {
+ uint16_t sport[2];
+ uint8_t icmpv6_type[2];
+ };
+ union {
+ uint16_t dport[2];
+ uint8_t icmpv6_code[2];
+ };
};
#endif
diff --git a/net/bridge/netfilter/ebt_ip6.c b/net/bridge/netfilter/ebt_ip6.c
index 50a46af..2ed0056 100644
--- a/net/bridge/netfilter/ebt_ip6.c
+++ b/net/bridge/netfilter/ebt_ip6.c
@@ -22,9 +22,15 @@
#include <linux/netfilter_bridge/ebtables.h>
#include <linux/netfilter_bridge/ebt_ip6.h>
-struct tcpudphdr {
- __be16 src;
- __be16 dst;
+union pkthdr {
+ struct {
+ __be16 src;
+ __be16 dst;
+ } tcpudphdr;
+ struct {
+ u8 type;
+ u8 code;
+ } icmphdr;
};
static bool
@@ -33,8 +39,8 @@ ebt_ip6_mt(const struct sk_buff *skb, struct xt_action_param *par)
const struct ebt_ip6_info *info = par->matchinfo;
const struct ipv6hdr *ih6;
struct ipv6hdr _ip6h;
- const struct tcpudphdr *pptr;
- struct tcpudphdr _ports;
+ const union pkthdr *pptr;
+ union pkthdr _pkthdr;
ih6 = skb_header_pointer(skb, 0, sizeof(_ip6h), &_ip6h);
if (ih6 == NULL)
@@ -56,26 +62,34 @@ ebt_ip6_mt(const struct sk_buff *skb, struct xt_action_param *par)
return false;
if (FWINV(info->protocol != nexthdr, EBT_IP6_PROTO))
return false;
- if (!(info->bitmask & EBT_IP6_DPORT) &&
- !(info->bitmask & EBT_IP6_SPORT))
+ if (!(info->bitmask & ( EBT_IP6_DPORT |
+ EBT_IP6_SPORT | EBT_IP6_ICMP6)))
return true;
- pptr = skb_header_pointer(skb, offset_ph, sizeof(_ports),
- &_ports);
+
+ /* min icmpv6 headersize is 4, so sizeof(_pkthdr) is ok. */
+ pptr = skb_header_pointer(skb, offset_ph, sizeof(_pkthdr),
+ &_pkthdr);
if (pptr == NULL)
return false;
if (info->bitmask & EBT_IP6_DPORT) {
- u32 dst = ntohs(pptr->dst);
+ u16 dst = ntohs(pptr->tcpudphdr.dst);
if (FWINV(dst < info->dport[0] ||
dst > info->dport[1], EBT_IP6_DPORT))
return false;
}
if (info->bitmask & EBT_IP6_SPORT) {
- u32 src = ntohs(pptr->src);
+ u16 src = ntohs(pptr->tcpudphdr.src);
if (FWINV(src < info->sport[0] ||
src > info->sport[1], EBT_IP6_SPORT))
return false;
}
- return true;
+ if ((info->bitmask & EBT_IP6_ICMP6) &&
+ FWINV(pptr->icmphdr.type < info->icmpv6_type[0] ||
+ pptr->icmphdr.type > info->icmpv6_type[1] ||
+ pptr->icmphdr.code < info->icmpv6_code[0] ||
+ pptr->icmphdr.code > info->icmpv6_code[1],
+ EBT_IP6_ICMP6))
+ return false;
}
return true;
}
@@ -103,6 +117,14 @@ static int ebt_ip6_mt_check(const struct xt_mtchk_param *par)
return -EINVAL;
if (info->bitmask & EBT_IP6_SPORT && info->sport[0] > info->sport[1])
return -EINVAL;
+ if (info->bitmask & EBT_IP6_ICMP6) {
+ if ((info->invflags & EBT_IP6_PROTO) ||
+ info->protocol != IPPROTO_ICMPV6)
+ return -EINVAL;
+ if (info->icmpv6_type[0] > info->icmpv6_type[1] ||
+ info->icmpv6_code[0] > info->icmpv6_code[1])
+ return -EINVAL;
+ }
return 0;
}
--
1.7.2.2
next reply other threads:[~2010-12-20 15:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 14:57 Florian Westphal [this message]
2010-12-20 18:17 ` [PATCH v2] netfilter: ebt_ip6: allow matching on ipv6-icmp types/codes Bart De Schuymer
2011-01-12 21:15 ` Pablo Neira Ayuso
2011-01-18 20:10 ` Bart De Schuymer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292857067-1595-1-git-send-email-fw@strlen.de \
--to=fw@strlen.de \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).