From: pablo@netfilter.org
To: netfilter-devel@vger.kernel.org
Cc: davem@davemloft.net, netdev@vger.kernel.org
Subject: [PATCH 04/19] netfilter: add ipv6 reverse path filter match
Date: Sun, 25 Dec 2011 02:57:20 +0100 [thread overview]
Message-ID: <1324778255-2830-5-git-send-email-pablo@netfilter.org> (raw)
In-Reply-To: <1324778255-2830-1-git-send-email-pablo@netfilter.org>
From: Florian Westphal <fw@strlen.de>
This is not merged with the ipv4 match into xt_rpfilter.c
to avoid ipv6 module dependency issues.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
net/ipv6/netfilter/Kconfig | 10 +++
net/ipv6/netfilter/Makefile | 1 +
net/ipv6/netfilter/ip6t_rpfilter.c | 133 ++++++++++++++++++++++++++++++++++++
3 files changed, 144 insertions(+), 0 deletions(-)
create mode 100644 net/ipv6/netfilter/ip6t_rpfilter.c
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index f792b34..9a68fb5 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -125,6 +125,16 @@ config IP6_NF_MATCH_MH
To compile it as a module, choose M here. If unsure, say N.
+config IP6_NF_MATCH_RPFILTER
+ tristate '"rpfilter" reverse path filter match support'
+ depends on NETFILTER_ADVANCED
+ ---help---
+ This option allows you to match packets whose replies would
+ go out via the interface the packet came in.
+
+ To compile it as a module, choose M here. If unsure, say N.
+ The module will be called ip6t_rpfilter.
+
config IP6_NF_MATCH_RT
tristate '"rt" Routing header match support'
depends on NETFILTER_ADVANCED
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index abfee91..2eaed96 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o
obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o
obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o
+obj-$(CONFIG_IP6_NF_MATCH_RPFILTER) += ip6t_rpfilter.o
obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
# targets
diff --git a/net/ipv6/netfilter/ip6t_rpfilter.c b/net/ipv6/netfilter/ip6t_rpfilter.c
new file mode 100644
index 0000000..5d1d8b0
--- /dev/null
+++ b/net/ipv6/netfilter/ip6t_rpfilter.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2011 Florian Westphal <fw@strlen.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/route.h>
+#include <net/ip6_fib.h>
+#include <net/ip6_route.h>
+
+#include <linux/netfilter/xt_rpfilter.h>
+#include <linux/netfilter/x_tables.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
+MODULE_DESCRIPTION("Xtables: IPv6 reverse path filter match");
+
+static bool rpfilter_addr_unicast(const struct in6_addr *addr)
+{
+ int addr_type = ipv6_addr_type(addr);
+ return addr_type & IPV6_ADDR_UNICAST;
+}
+
+static bool rpfilter_lookup_reverse6(const struct sk_buff *skb,
+ const struct net_device *dev, u8 flags)
+{
+ struct rt6_info *rt;
+ struct ipv6hdr *iph = ipv6_hdr(skb);
+ bool ret = false;
+ struct flowi6 fl6 = {
+ .flowlabel = (* (__be32 *) iph) & IPV6_FLOWINFO_MASK,
+ .flowi6_proto = iph->nexthdr,
+ .daddr = iph->saddr,
+ };
+ int lookup_flags;
+
+ if (rpfilter_addr_unicast(&iph->daddr)) {
+ memcpy(&fl6.saddr, &iph->daddr, sizeof(struct in6_addr));
+ lookup_flags = RT6_LOOKUP_F_HAS_SADDR;
+ } else {
+ lookup_flags = 0;
+ }
+
+ fl6.flowi6_mark = flags & XT_RPFILTER_VALID_MARK ? skb->mark : 0;
+ if ((flags & XT_RPFILTER_LOOSE) == 0) {
+ fl6.flowi6_oif = dev->ifindex;
+ lookup_flags |= RT6_LOOKUP_F_IFACE;
+ }
+
+ rt = (void *) ip6_route_lookup(dev_net(dev), &fl6, lookup_flags);
+ if (rt->dst.error)
+ goto out;
+
+ if (rt->rt6i_flags & (RTF_REJECT|RTF_ANYCAST))
+ goto out;
+
+ if (rt->rt6i_flags & RTF_LOCAL) {
+ ret = flags & XT_RPFILTER_ACCEPT_LOCAL;
+ goto out;
+ }
+
+ if (rt->rt6i_idev->dev == dev || (flags & XT_RPFILTER_LOOSE))
+ ret = true;
+ out:
+ dst_release(&rt->dst);
+ return ret;
+}
+
+static bool rpfilter_mt(const struct sk_buff *skb, struct xt_action_param *par)
+{
+ const struct xt_rpfilter_info *info = par->matchinfo;
+ int saddrtype;
+ struct ipv6hdr *iph;
+ bool invert = info->flags & XT_RPFILTER_INVERT;
+
+ if (par->in->flags & IFF_LOOPBACK)
+ return true ^ invert;
+
+ iph = ipv6_hdr(skb);
+ saddrtype = ipv6_addr_type(&iph->saddr);
+ if (unlikely(saddrtype == IPV6_ADDR_ANY))
+ return true ^ invert; /* not routable: forward path will drop it */
+
+ return rpfilter_lookup_reverse6(skb, par->in, info->flags) ^ invert;
+}
+
+static int rpfilter_check(const struct xt_mtchk_param *par)
+{
+ const struct xt_rpfilter_info *info = par->matchinfo;
+ unsigned int options = ~XT_RPFILTER_OPTION_MASK;
+
+ if (info->flags & options) {
+ pr_info("unknown options encountered");
+ return -EINVAL;
+ }
+
+ if (strcmp(par->table, "mangle") != 0 &&
+ strcmp(par->table, "raw") != 0) {
+ pr_info("match only valid in the \'raw\' "
+ "or \'mangle\' tables, not \'%s\'.\n", par->table);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct xt_match rpfilter_mt_reg __read_mostly = {
+ .name = "rpfilter",
+ .family = NFPROTO_IPV6,
+ .checkentry = rpfilter_check,
+ .match = rpfilter_mt,
+ .matchsize = sizeof(struct xt_rpfilter_info),
+ .hooks = (1 << NF_INET_PRE_ROUTING),
+ .me = THIS_MODULE
+};
+
+static int __init rpfilter_mt_init(void)
+{
+ return xt_register_match(&rpfilter_mt_reg);
+}
+
+static void __exit rpfilter_mt_exit(void)
+{
+ xt_unregister_match(&rpfilter_mt_reg);
+}
+
+module_init(rpfilter_mt_init);
+module_exit(rpfilter_mt_exit);
--
1.7.2.5
next prev parent reply other threads:[~2011-12-25 1:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-25 1:57 [PATCH 00/19] netfilter updates for net-next (upcoming 3.3) pablo
2011-12-25 1:57 ` [PATCH 01/19] net: ipv4: export fib_lookup and fib_table_lookup pablo
2011-12-25 1:57 ` [PATCH 02/19] netfilter: add ipv4 reverse path filter match pablo
2011-12-25 1:57 ` [PATCH 03/19] ipv6: add ip6_route_lookup pablo
2011-12-25 1:57 ` pablo [this message]
2011-12-25 1:57 ` [PATCH 05/19] IPVS: Modify the SH scheduler to use weights pablo
2011-12-25 1:57 ` [PATCH 06/19] netfilter: nf_conntrack: use atomic64 for accounting counters pablo
2012-01-03 12:01 ` David Laight
2012-01-03 13:31 ` Eric Dumazet
2012-01-03 13:37 ` Eric Dumazet
2012-01-03 17:05 ` Eric Dumazet
2011-12-25 1:57 ` [PATCH 07/19] netfilter: ctnetlink: use expect instead of master tuple in get operation pablo
2011-12-25 1:57 ` [PATCH 08/19] netfilter: ctnetlink: support individual atomic-get-and-reset of counters pablo
2011-12-25 1:57 ` [PATCH 09/19] netfilter: rework user-space expectation helper support pablo
2011-12-25 1:57 ` [PATCH 10/19] netfilter: nf_nat: export NAT definitions to userspace pablo
2011-12-25 1:57 ` [PATCH 11/19] netfilter: nf_nat: use hash random for bysource hash pablo
2011-12-25 1:57 ` [PATCH 12/19] netfilter: nf_nat: add missing nla_policy entry for CTA_NAT_PROTO attribute pablo
2011-12-25 1:57 ` [PATCH 13/19] netfilter: nat: remove module reference counting from NAT protocols pablo
2011-12-25 1:57 ` [PATCH 14/19] netfilter: nf_nat: remove obsolete code from nf_nat_icmp_reply_translation() pablo
2011-12-25 1:57 ` [PATCH 15/19] netfilter: nf_nat: remove obsolete check in nf_nat_mangle_udp_packet() pablo
2011-12-25 1:57 ` [PATCH 16/19] netfilter: ctnetlink: remove dead NAT code pablo
2011-12-25 1:57 ` [PATCH 17/19] netfilter: ctnetlink: get and zero operations must be atomic pablo
2011-12-25 1:57 ` [PATCH 18/19] netfilter: add extended accounting infrastructure over nfnetlink pablo
2011-12-25 1:57 ` [PATCH 19/19] netfilter: xtables: add nfacct match to support extended accounting pablo
2011-12-25 8:12 ` [PATCH 00/19] netfilter updates for net-next (upcoming 3.3) David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324778255-2830-5-git-send-email-pablo@netfilter.org \
--to=pablo@netfilter.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).