From: pablo@netfilter.org
To: netfilter-devel@vger.kernel.org
Cc: davem@davemloft.net, netdev@vger.kernel.org
Subject: [PATCH 16/23] netfilter: nf_ct_udp[lite]: convert UDP[lite] timeouts to array
Date: Thu, 8 Mar 2012 02:01:05 +0100 [thread overview]
Message-ID: <1331168472-5820-17-git-send-email-pablo@netfilter.org> (raw)
In-Reply-To: <1331168472-5820-1-git-send-email-pablo@netfilter.org>
From: Pablo Neira Ayuso <pablo@netfilter.org>
Use one array to store the UDP timeouts instead of two variables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
net/netfilter/nf_conntrack_proto_udp.c | 30 ++++++++++++++++++---------
net/netfilter/nf_conntrack_proto_udplite.c | 25 +++++++++++++++-------
2 files changed, 37 insertions(+), 18 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_udp.c b/net/netfilter/nf_conntrack_proto_udp.c
index 5f35757..5b24ff8 100644
--- a/net/netfilter/nf_conntrack_proto_udp.c
+++ b/net/netfilter/nf_conntrack_proto_udp.c
@@ -25,8 +25,16 @@
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
#include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
-static unsigned int nf_ct_udp_timeout __read_mostly = 30*HZ;
-static unsigned int nf_ct_udp_timeout_stream __read_mostly = 180*HZ;
+enum udp_conntrack {
+ UDP_CT_UNREPLIED,
+ UDP_CT_REPLIED,
+ UDP_CT_MAX
+};
+
+static unsigned int udp_timeouts[UDP_CT_MAX] = {
+ [UDP_CT_UNREPLIED] = 30*HZ,
+ [UDP_CT_REPLIED] = 180*HZ,
+};
static bool udp_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
@@ -74,13 +82,15 @@ static int udp_packet(struct nf_conn *ct,
/* If we've seen traffic both ways, this is some kind of UDP
stream. Extend timeout. */
if (test_bit(IPS_SEEN_REPLY_BIT, &ct->status)) {
- nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_udp_timeout_stream);
+ nf_ct_refresh_acct(ct, ctinfo, skb,
+ udp_timeouts[UDP_CT_REPLIED]);
/* Also, more likely to be important, and not a probe */
if (!test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
nf_conntrack_event_cache(IPCT_ASSURED, ct);
- } else
- nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_udp_timeout);
-
+ } else {
+ nf_ct_refresh_acct(ct, ctinfo, skb,
+ udp_timeouts[UDP_CT_UNREPLIED]);
+ }
return NF_ACCEPT;
}
@@ -142,14 +152,14 @@ static struct ctl_table_header *udp_sysctl_header;
static struct ctl_table udp_sysctl_table[] = {
{
.procname = "nf_conntrack_udp_timeout",
- .data = &nf_ct_udp_timeout,
+ .data = &udp_timeouts[UDP_CT_UNREPLIED],
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
},
{
.procname = "nf_conntrack_udp_timeout_stream",
- .data = &nf_ct_udp_timeout_stream,
+ .data = &udp_timeouts[UDP_CT_REPLIED],
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
@@ -160,14 +170,14 @@ static struct ctl_table udp_sysctl_table[] = {
static struct ctl_table udp_compat_sysctl_table[] = {
{
.procname = "ip_conntrack_udp_timeout",
- .data = &nf_ct_udp_timeout,
+ .data = &udp_timeouts[UDP_CT_UNREPLIED],
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
},
{
.procname = "ip_conntrack_udp_timeout_stream",
- .data = &nf_ct_udp_timeout_stream,
+ .data = &udp_timeouts[UDP_CT_REPLIED],
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
diff --git a/net/netfilter/nf_conntrack_proto_udplite.c b/net/netfilter/nf_conntrack_proto_udplite.c
index f52ca11..e730717 100644
--- a/net/netfilter/nf_conntrack_proto_udplite.c
+++ b/net/netfilter/nf_conntrack_proto_udplite.c
@@ -24,8 +24,16 @@
#include <net/netfilter/nf_conntrack_ecache.h>
#include <net/netfilter/nf_log.h>
-static unsigned int nf_ct_udplite_timeout __read_mostly = 30*HZ;
-static unsigned int nf_ct_udplite_timeout_stream __read_mostly = 180*HZ;
+enum udplite_conntrack {
+ UDPLITE_CT_UNREPLIED,
+ UDPLITE_CT_REPLIED,
+ UDPLITE_CT_MAX
+};
+
+static unsigned int udplite_timeouts[UDPLITE_CT_MAX] = {
+ [UDPLITE_CT_UNREPLIED] = 30*HZ,
+ [UDPLITE_CT_REPLIED] = 180*HZ,
+};
static bool udplite_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
@@ -72,13 +80,14 @@ static int udplite_packet(struct nf_conn *ct,
stream. Extend timeout. */
if (test_bit(IPS_SEEN_REPLY_BIT, &ct->status)) {
nf_ct_refresh_acct(ct, ctinfo, skb,
- nf_ct_udplite_timeout_stream);
+ udplite_timeouts[UDPLITE_CT_REPLIED]);
/* Also, more likely to be important, and not a probe */
if (!test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
nf_conntrack_event_cache(IPCT_ASSURED, ct);
- } else
- nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_udplite_timeout);
-
+ } else {
+ nf_ct_refresh_acct(ct, ctinfo, skb,
+ udplite_timeouts[UDPLITE_CT_UNREPLIED]);
+ }
return NF_ACCEPT;
}
@@ -147,14 +156,14 @@ static struct ctl_table_header *udplite_sysctl_header;
static struct ctl_table udplite_sysctl_table[] = {
{
.procname = "nf_conntrack_udplite_timeout",
- .data = &nf_ct_udplite_timeout,
+ .data = &udplite_timeouts[UDPLITE_CT_UNREPLIED],
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
},
{
.procname = "nf_conntrack_udplite_timeout_stream",
- .data = &nf_ct_udplite_timeout_stream,
+ .data = &udplite_timeouts[UDPLITE_CT_REPLIED],
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_jiffies,
--
1.7.7.3
next prev parent reply other threads:[~2012-03-08 1:01 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-08 1:00 [PATCH 00/23] netfilter updates for net-next pablo
2012-03-08 1:00 ` [PATCH 01/23] netfilter: ipset: use NFPROTO_ constants pablo
2012-03-08 1:00 ` [PATCH 02/23] netfilter: ipset: expose userspace-relevant parts in ip_set.h pablo
2012-03-08 1:00 ` [PATCH 03/23] netfilter: ipset: Log warning when a hash type of set gets full pablo
2012-03-08 1:00 ` [PATCH 04/23] netfilter: ipset: Exceptions support added to hash:*net* types pablo
2012-03-08 1:00 ` [PATCH 05/23] netfilter: ipset: hash:net,iface timeout bug fixed pablo
2012-03-08 1:00 ` [PATCH 06/23] netfilter: ctnetlink: allow to set helper for new expectations pablo
2012-03-08 1:00 ` [PATCH 07/23] netfilter: ctnetlink: allow to set expectation class pablo
2012-03-08 1:00 ` [PATCH 08/23] netfilter: ctnetlink: add NAT support for expectations pablo
2012-03-08 1:00 ` [PATCH 09/23] netfilter: ctnetlink: allow to set expectfn " pablo
2012-03-08 1:00 ` [PATCH 10/23] netfilter: merge ipt_LOG and ip6_LOG into xt_LOG pablo
2012-03-08 1:01 ` [PATCH 11/23] netfilter: nf_ct_ecache: trailing whitespace removed pablo
2012-03-08 1:01 ` [PATCH 12/23] netfilter: nf_ct_ecache: refactor nf_ct_deliver_cached_events pablo
2012-03-08 1:01 ` [PATCH 13/23] netfilter: remove ipt_SAME.h and ipt_realm.h pablo
2012-03-08 1:01 ` [PATCH 14/23] netfilter: xt_LOG: fix bogus extra layer-4 logging information pablo
2012-03-08 1:01 ` [PATCH 15/23] netfilter: ctnetlink: fix lockep splats pablo
2012-03-08 1:01 ` pablo [this message]
2012-03-08 1:01 ` [PATCH 17/23] netfilter: nf_ct_tcp: move retransmission and unacknowledged timeout to array pablo
2012-03-08 1:01 ` [PATCH 18/23] netfilter: nf_ct_gre: add unsigned int array to define timeouts pablo
2012-03-08 1:01 ` [PATCH 19/23] netfilter: nf_conntrack: pass timeout array to l4->new and l4->packet pablo
2012-03-08 1:01 ` [PATCH 20/23] netfilter: add cttimeout infrastructure for fine timeout tuning pablo
2012-03-08 1:01 ` [PATCH 21/23] netfilter: nf_ct_ext: add timeout extension pablo
2012-03-08 1:01 ` [PATCH 22/23] netfilter: xt_CT: allow to attach timeout policy + glue code pablo
2012-03-08 1:01 ` [PATCH 23/23] netfilter: xt_LOG: add __printf() to sb_add() pablo
2012-03-08 6:48 ` [PATCH 00/23] netfilter updates for net-next David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331168472-5820-17-git-send-email-pablo@netfilter.org \
--to=pablo@netfilter.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).