netfilter-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pablo Neira Ayuso <pablo@netfilter.org>
To: netfilter-devel@vger.kernel.org
Cc: arturo.borrero.glez@gmail.com
Subject: [PATCH] conntrackd: Disable runtime systemd support by default
Date: Wed, 17 Feb 2016 12:26:01 +0100	[thread overview]
Message-ID: <1455708361-3143-1-git-send-email-pablo@netfilter.org> (raw)

By default, conntrackd is compiled with no built-in systemd support.
This patch updates the default runtime behaviour to be consistent
with what ./configure provides by default.

Thus, users should explicitly indicate "Systemd On" in their configuration
file to enable this. This shouldn't cause any problem to old users of
conntrackd.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
v2: updates grammar to handle "On" case accordingly.

 conntrackd.conf.5                |  4 ++--
 doc/stats/conntrackd.conf        |  4 ++--
 doc/sync/alarm/conntrackd.conf   |  4 ++--
 doc/sync/ftfw/conntrackd.conf    |  4 ++--
 doc/sync/notrack/conntrackd.conf |  4 ++--
 src/read_config_yy.y             | 10 ++--------
 6 files changed, 12 insertions(+), 18 deletions(-)

diff --git a/conntrackd.conf.5 b/conntrackd.conf.5
index 4781825..ed387b9 100644
--- a/conntrackd.conf.5
+++ b/conntrackd.conf.5
@@ -457,9 +457,9 @@ Obviusly, this requires the init systemd of your system to be \fBsystemd(1)\fP.
 
 Note: \fBsystemd(1)\fP watchdog is supported as well.
 
-Example: Systemd off
+Example: Systemd on
 
-By default runtime support is activated.
+By default runtime support is disabled.
 
 .TP
 .BI "Nice <value>"
diff --git a/doc/stats/conntrackd.conf b/doc/stats/conntrackd.conf
index b1cca07..6a9aec8 100644
--- a/doc/stats/conntrackd.conf
+++ b/doc/stats/conntrackd.conf
@@ -6,9 +6,9 @@ General {
 	# Enable systemd support. If conntrackd is compiled with the proper
 	# configuration, you can use a systemd service unit of Type=notify
 	# and use conntrackd with systemd watchdog as well.
-	# Default is: on
+	# Default is: off
 	#
-	#Systemd off
+	#Systemd on
 
 	#
 	# Set the nice value of the daemon. This value goes from -20
diff --git a/doc/sync/alarm/conntrackd.conf b/doc/sync/alarm/conntrackd.conf
index 39deb47..225d1c9 100644
--- a/doc/sync/alarm/conntrackd.conf
+++ b/doc/sync/alarm/conntrackd.conf
@@ -221,9 +221,9 @@ General {
 	# Enable systemd support. If conntrackd is compiled with the proper
 	# configuration, you can use a systemd service unit of Type=notify
 	# and use conntrackd with systemd watchdog as well.
-	# Default is: on
+	# Default is: off
 	#
-	#Systemd off
+	#Systemd on
 
 	#
 	# Set the nice value of the daemon, this value goes from -20
diff --git a/doc/sync/ftfw/conntrackd.conf b/doc/sync/ftfw/conntrackd.conf
index 60d7d97..228674c 100644
--- a/doc/sync/ftfw/conntrackd.conf
+++ b/doc/sync/ftfw/conntrackd.conf
@@ -244,9 +244,9 @@ General {
 	# Enable systemd support. If conntrackd is compiled with the proper
 	# configuration, you can use a systemd service unit of Type=notify
 	# and use conntrackd with systemd watchdog as well.
-	# Default is: on
+	# Default is: off
 	#
-	#Systemd off
+	#Systemd on
 
 	#
 	# Set the nice value of the daemon, this value goes from -20
diff --git a/doc/sync/notrack/conntrackd.conf b/doc/sync/notrack/conntrackd.conf
index b9d42ba..3becd91 100644
--- a/doc/sync/notrack/conntrackd.conf
+++ b/doc/sync/notrack/conntrackd.conf
@@ -283,9 +283,9 @@ General {
 	# Enable systemd support. If conntrackd is compiled with the proper
 	# configuration, you can use a systemd service unit of Type=notify
 	# and use conntrackd with systemd watchdog as well.
-	# Default is: on
+	# Default is: off
 	#
-	#Systemd off
+	#Systemd on
 
 	#
 	# Set the nice value of the daemon, this value goes from -20
diff --git a/src/read_config_yy.y b/src/read_config_yy.y
index 58ad2d0..cc0eb18 100644
--- a/src/read_config_yy.y
+++ b/src/read_config_yy.y
@@ -1126,11 +1126,8 @@ general_line: hashsize
 	    | systemd
 	    ;
 
-systemd: T_SYSTEMD T_ON { /* already enabled in init_config() */ };
-systemd: T_SYSTEMD T_OFF
-{
-	conf.systemd = 0;
-};
+systemd: T_SYSTEMD T_ON		{ conf.systemd = 1; };
+systemd: T_SYSTEMD T_OFF	{ conf.systemd = 0; };
 
 netlink_buffer_size: T_BUFFER_SIZE T_NUMBER
 {
@@ -1864,9 +1861,6 @@ init_config(char *filename)
 	CONFIG(stats).syslog_facility = -1;
 	CONFIG(netlink).subsys_id = -1;
 
-	/* enable systemd by default */
-	CONFIG(systemd) = 1;
-
 	/* Initialize list of user-space helpers */
 	INIT_LIST_HEAD(&CONFIG(cthelper).list);
 
-- 
2.1.4


             reply	other threads:[~2016-02-17 11:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-17 11:26 Pablo Neira Ayuso [this message]
2016-02-18  7:54 ` [PATCH] conntrackd: Disable runtime systemd support by default Arturo Borrero Gonzalez
2016-02-18 13:07   ` Pablo Neira Ayuso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455708361-3143-1-git-send-email-pablo@netfilter.org \
    --to=pablo@netfilter.org \
    --cc=arturo.borrero.glez@gmail.com \
    --cc=netfilter-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).