From: Thomas Graf <tgraf@infradead.org>
To: kaber@trash.net
Cc: netfilter-devel@vger.kernel.org
Subject: [PATCH] ebtables: Clone xt_AUDIT to ebt_audit to return EBT_CONTINUE
Date: Tue, 15 Mar 2011 20:33:07 -0400 [thread overview]
Message-ID: <20110316003307.GB26145@canuck.infradead.org> (raw)
Even though ebtables uses xtables it still requires targets to
return EBT_CONTINUE instead of XT_CONTINUE. This prevented
xt_AUDIT to work as ebt module.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig
index ba6f73e..8b7d48f 100644
--- a/net/bridge/netfilter/Kconfig
+++ b/net/bridge/netfilter/Kconfig
@@ -144,6 +144,15 @@ config BRIDGE_EBT_ARPREPLY
To compile it as a module, choose M here. If unsure, say N.
+config BRIDGE_EBT_AUDIT
+ tristate "ebt: audit target support"
+ depends on AUDIT
+ help
+ This option adds a 'AUDIT' target, which can be used to create
+ audit records for packets dropped/accepted.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config BRIDGE_EBT_DNAT
tristate "ebt: dnat target support"
help
diff --git a/net/bridge/netfilter/Makefile b/net/bridge/netfilter/Makefile
index 0718699..a14865e 100644
--- a/net/bridge/netfilter/Makefile
+++ b/net/bridge/netfilter/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_BRIDGE_EBT_VLAN) += ebt_vlan.o
# targets
obj-$(CONFIG_BRIDGE_EBT_ARPREPLY) += ebt_arpreply.o
+obj-$(CONFIG_BRIDGE_EBT_AUDIT) += ebt_audit.o
obj-$(CONFIG_BRIDGE_EBT_MARK_T) += ebt_mark.o
obj-$(CONFIG_BRIDGE_EBT_DNAT) += ebt_dnat.o
obj-$(CONFIG_BRIDGE_EBT_REDIRECT) += ebt_redirect.o
diff --git a/net/bridge/netfilter/ebt_audit.c b/net/bridge/netfilter/ebt_audit.c
new file mode 100644
index 0000000..03fe00f
--- /dev/null
+++ b/net/bridge/netfilter/ebt_audit.c
@@ -0,0 +1,201 @@
+/*
+ * Creates audit record for dropped/accepted packets
+ *
+ * (C) 2010-2011 Thomas Graf <tgraf@redhat.com>
+ * (C) 2010-2011 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/audit.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/if_arp.h>
+#include <linux/netfilter/x_tables.h>
+#include <linux/netfilter/xt_AUDIT.h>
+#include <linux/netfilter_bridge/ebtables.h>
+#include <net/ipv6.h>
+#include <net/ip.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Graf <tgraf@redhat.com>");
+MODULE_DESCRIPTION("Ebtables: creates audit records for dropped/accepted packets");
+
+static void audit_proto(struct audit_buffer *ab, struct sk_buff *skb,
+ unsigned int proto, unsigned int offset)
+{
+ switch (proto) {
+ case IPPROTO_TCP:
+ case IPPROTO_UDP:
+ case IPPROTO_UDPLITE: {
+ const __be16 *pptr;
+ __be16 _ports[2];
+
+ pptr = skb_header_pointer(skb, offset, sizeof(_ports), _ports);
+ if (pptr == NULL) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ audit_log_format(ab, " sport=%hu dport=%hu",
+ ntohs(pptr[0]), ntohs(pptr[1]));
+ }
+ break;
+
+ case IPPROTO_ICMP:
+ case IPPROTO_ICMPV6: {
+ const u8 *iptr;
+ u8 _ih[2];
+
+ iptr = skb_header_pointer(skb, offset, sizeof(_ih), &_ih);
+ if (iptr == NULL) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ audit_log_format(ab, " icmptype=%hhu icmpcode=%hhu",
+ iptr[0], iptr[1]);
+
+ }
+ break;
+ }
+}
+
+static void audit_ip4(struct audit_buffer *ab, struct sk_buff *skb)
+{
+ struct iphdr _iph;
+ const struct iphdr *ih;
+
+ ih = skb_header_pointer(skb, 0, sizeof(_iph), &_iph);
+ if (!ih) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ audit_log_format(ab, " saddr=%pI4 daddr=%pI4 ipid=%hu proto=%hhu",
+ &ih->saddr, &ih->daddr, ntohs(ih->id), ih->protocol);
+
+ if (ntohs(ih->frag_off) & IP_OFFSET) {
+ audit_log_format(ab, " frag=1");
+ return;
+ }
+
+ audit_proto(ab, skb, ih->protocol, ih->ihl * 4);
+}
+
+static void audit_ip6(struct audit_buffer *ab, struct sk_buff *skb)
+{
+ struct ipv6hdr _ip6h;
+ const struct ipv6hdr *ih;
+ u8 nexthdr;
+ int offset;
+
+ ih = skb_header_pointer(skb, skb_network_offset(skb), sizeof(_ip6h), &_ip6h);
+ if (!ih) {
+ audit_log_format(ab, " truncated=1");
+ return;
+ }
+
+ nexthdr = ih->nexthdr;
+ offset = ipv6_skip_exthdr(skb, skb_network_offset(skb) + sizeof(_ip6h),
+ &nexthdr);
+
+ audit_log_format(ab, " saddr=%pI6c daddr=%pI6c proto=%hhu",
+ &ih->saddr, &ih->daddr, nexthdr);
+
+ if (offset)
+ audit_proto(ab, skb, nexthdr, offset);
+}
+
+static unsigned int
+audit_tg(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ const struct xt_audit_info *info = par->targinfo;
+ struct audit_buffer *ab;
+
+ ab = audit_log_start(NULL, GFP_ATOMIC, AUDIT_NETFILTER_PKT);
+ if (ab == NULL)
+ goto errout;
+
+ audit_log_format(ab, "action=%hhu hook=%u len=%u inif=%s outif=%s",
+ info->type, par->hooknum, skb->len,
+ par->in ? par->in->name : "?",
+ par->out ? par->out->name : "?");
+
+ if (skb->mark)
+ audit_log_format(ab, " mark=%#x", skb->mark);
+
+ if (skb->dev && skb->dev->type == ARPHRD_ETHER) {
+ audit_log_format(ab, " smac=%pM dmac=%pM macproto=0x%04x",
+ eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
+ ntohs(eth_hdr(skb)->h_proto));
+
+ if (par->family == NFPROTO_BRIDGE) {
+ switch (eth_hdr(skb)->h_proto) {
+ case __constant_htons(ETH_P_IP):
+ audit_ip4(ab, skb);
+ break;
+
+ case __constant_htons(ETH_P_IPV6):
+ audit_ip6(ab, skb);
+ break;
+ }
+ }
+ }
+
+ switch (par->family) {
+ case NFPROTO_IPV4:
+ audit_ip4(ab, skb);
+ break;
+
+ case NFPROTO_IPV6:
+ audit_ip6(ab, skb);
+ break;
+ }
+
+ audit_log_end(ab);
+
+errout:
+ return EBT_CONTINUE;
+}
+
+static int audit_tg_check(const struct xt_tgchk_param *par)
+{
+ const struct xt_audit_info *info = par->targinfo;
+
+ if (info->type > XT_AUDIT_TYPE_MAX) {
+ pr_info("Audit type out of range (valid range: 0..%hhu)\n",
+ XT_AUDIT_TYPE_MAX);
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+static struct xt_target audit_tg_reg __read_mostly = {
+ .name = "AUDIT",
+ .family = NFPROTO_BRIDGE,
+ .target = audit_tg,
+ .targetsize = sizeof(struct xt_audit_info),
+ .checkentry = audit_tg_check,
+ .me = THIS_MODULE,
+};
+
+static int __init audit_tg_init(void)
+{
+ return xt_register_target(&audit_tg_reg);
+}
+
+static void __exit audit_tg_exit(void)
+{
+ xt_unregister_target(&audit_tg_reg);
+}
+
+module_init(audit_tg_init);
+module_exit(audit_tg_exit);
diff --git a/net/netfilter/xt_AUDIT.c b/net/netfilter/xt_AUDIT.c
index 81802d2..baa0416 100644
--- a/net/netfilter/xt_AUDIT.c
+++ b/net/netfilter/xt_AUDIT.c
@@ -27,7 +27,6 @@ MODULE_AUTHOR("Thomas Graf <tgraf@redhat.com>");
MODULE_DESCRIPTION("Xtables: creates audit records for dropped/accepted packets");
MODULE_ALIAS("ipt_AUDIT");
MODULE_ALIAS("ip6t_AUDIT");
-MODULE_ALIAS("ebt_AUDIT");
MODULE_ALIAS("arpt_AUDIT");
static void audit_proto(struct audit_buffer *ab, struct sk_buff *skb,
next reply other threads:[~2011-03-16 0:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-16 0:33 Thomas Graf [this message]
2011-03-16 0:43 ` [PATCH] ebtables: Clone xt_AUDIT to ebt_audit to return EBT_CONTINUE Jan Engelhardt
2011-03-16 5:40 ` Patrick McHardy
2011-03-16 8:24 ` Thomas Graf
2011-03-16 13:58 ` Patrick McHardy
2011-03-16 9:20 ` [PATCH] ebtables: Fix xt_AUDIT to work with ebtables, return EBT_CONTINUE if NFPROTO_BRIDGE Thomas Graf
2011-03-16 17:33 ` Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110316003307.GB26145@canuck.infradead.org \
--to=tgraf@infradead.org \
--cc=kaber@trash.net \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).