From: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
To: netfilter-devel@vger.kernel.org
Cc: pablo@netfilter.org
Subject: [libnftables PATCH 10/21] ct: xml: use key's name string instead of numbers
Date: Wed, 26 Jun 2013 13:37:08 +0200 [thread overview]
Message-ID: <20130626113708.23511.54545.stgit@nfdev.cica.es> (raw)
In-Reply-To: <20130626113509.23511.14359.stgit@nfdev.cica.es>
Now ct expr will use a string representation instead of a numerical one in the <key> node.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
---
src/expr/ct.c | 51 ++++++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 44 insertions(+), 7 deletions(-)
diff --git a/src/expr/ct.c b/src/expr/ct.c
index 3605ecc..2955353 100644
--- a/src/expr/ct.c
+++ b/src/expr/ct.c
@@ -22,6 +22,10 @@
#include <libnftables/rule.h>
#include "expr_ops.h"
+#ifndef NFT_CT_MAX
+#define NFT_CT_MAX (NFT_CT_PROTO_DST + 1)
+#endif
+
struct nft_expr_ct {
enum nft_ct_keys key;
uint32_t dreg; /* enum nft_registers */
@@ -150,6 +154,40 @@ nft_rule_expr_ct_parse(struct nft_rule_expr *e, struct nlattr *attr)
return 0;
}
+const char *ctkey2str_array[NFT_CT_MAX] = {
+ [NFT_CT_STATE] = "state",
+ [NFT_CT_DIRECTION] = "direction",
+ [NFT_CT_STATUS] = "status",
+ [NFT_CT_MARK] = "mark",
+ [NFT_CT_SECMARK] = "secmark",
+ [NFT_CT_EXPIRATION] = "expiration",
+ [NFT_CT_HELPER] = "helper",
+ [NFT_CT_PROTOCOL] = "protocol",
+ [NFT_CT_SRC] = "src",
+ [NFT_CT_DST] = "dst",
+ [NFT_CT_PROTO_SRC] = "proto_src",
+ [NFT_CT_PROTO_DST] = "proto_dst"
+};
+
+static const char *ctkey2str(uint32_t ctkey)
+{
+ if (ctkey > NFT_CT_MAX)
+ return "unknown";
+
+ return ctkey2str_array[ctkey];
+}
+
+static int str2ctkey(char *ctkey)
+{
+ int i;
+
+ for (i = 0; i < NFT_CT_MAX; i++)
+ if (strcmp(ctkey2str_array[i], ctkey) == 0)
+ return i;
+
+ return -1;
+}
+
static int nft_rule_expr_ct_xml_parse(struct nft_rule_expr *e, char *xml)
{
#ifdef XML_PARSING
@@ -188,11 +226,10 @@ static int nft_rule_expr_ct_xml_parse(struct nft_rule_expr *e, char *xml)
if (node == NULL)
goto err;
- tmp = strtoull(node->child->value.opaque, &endptr, 10);
- if (tmp > UINT8_MAX || tmp < 0 || *endptr)
+ if (str2ctkey(node->child->value.opaque) < 0)
goto err;
- ct->key = tmp;
+ ct->key = str2ctkey(node->child->value.opaque);
e->flags |= (1 << NFT_EXPR_CT_KEY);
node = mxmlFindElement(tree, tree, "dir", NULL, NULL, MXML_DESCEND);
@@ -229,13 +266,13 @@ nft_rule_expr_ct_snprintf(char *buf, size_t len, uint32_t type,
switch(type) {
case NFT_RULE_O_DEFAULT:
- return snprintf(buf, len, "dreg=%u key=%u dir=%u ",
- ct->dreg, ct->key, ct->dir);
+ return snprintf(buf, len, "dreg=%u key=%s dir=%u ",
+ ct->dreg, ctkey2str(ct->key), ct->dir);
case NFT_RULE_O_XML:
return snprintf(buf, len, "<dreg>%u</dreg>"
- "<key>%u</key>"
+ "<key>%s</key>"
"<dir>%u</dir>",
- ct->dreg, ct->key, ct->dir);
+ ct->dreg, ctkey2str(ct->key), ct->dir);
default:
break;
}
next prev parent reply other threads:[~2013-06-26 11:37 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-26 11:36 [libnftables PATCH 00/21] Small fixes for XML Arturo Borrero Gonzalez
2013-06-26 11:36 ` [libnftables PATCH 01/21] chain: add hooknum2str Arturo Borrero Gonzalez
2013-06-26 11:36 ` [libnftables PATCH 02/21] src: xml: convert family values to string Arturo Borrero Gonzalez
2013-06-26 11:36 ` [libnftables PATCH 03/21] rule: xml: conditional compat info Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 04/21] bitwise: xml: mask and xor use same number of data registers Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 05/21] expr: xml: validate registers < NFT_REG_MAX Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 06/21] nat: xml: change nat types string to dnat/snat Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 07/21] nat: xml: change IP range node names Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 08/21] byteorder: xml: op as string Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 09/21] ct: xml: add extra dir check Arturo Borrero Gonzalez
2013-06-26 11:37 ` Arturo Borrero Gonzalez [this message]
2013-06-26 11:37 ` [libnftables PATCH 11/21] exthdr: xml: fix mandatory elements Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 12/21] chain: xml: use string for policy Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 13/21] data_reg: xml: len node shows byte length Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 14/21] data_reg: xml: fix bytes movements Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 15/21] target&match: xml: don't print rev number Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 16/21] payload: xml: use string for base attribute Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 17/21] exthdr: xml: use string for type node Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 18/21] meta: xml: use string to represent key attribute Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 19/21] nat: snprintf: fix buffer offset Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 20/21] nat: xml: rename node type to nat_type Arturo Borrero Gonzalez
2013-06-26 11:37 ` [libnftables PATCH 21/21] exthdr: xml: rename type node to exthdr_type Arturo Borrero Gonzalez
2013-06-27 17:58 ` [libnftables PATCH 00/21] Small fixes for XML Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130626113708.23511.54545.stgit@nfdev.cica.es \
--to=arturo.borrero.glez@gmail.com \
--cc=netfilter-devel@vger.kernel.org \
--cc=pablo@netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).