From: Pablo Neira Ayuso <pablo@netfilter.org>
To: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Cc: netfilter-devel@vger.kernel.org, giuseppelng@gmail.com
Subject: Re: [RFC ebtables-compat PATCH] extensions: add ebt 802_3 extension
Date: Wed, 10 Dec 2014 13:58:07 +0100 [thread overview]
Message-ID: <20141210125807.GA4198@salvia> (raw)
In-Reply-To: <20141210123605.24725.15481.stgit@nfdev.cica.es>
On Wed, Dec 10, 2014 at 01:36:05PM +0100, Arturo Borrero Gonzalez wrote:
> This patch adds the first ebtables extension to ebtables-compat.
> The original 802_3 code is adapted to the xtables environment.
>
> I tried to mimic as much as possible the original ebtables code paths.
>
> With this patch, ebtables-compat is able to send the 802_3 match to the kernel,
> but the kernel-to-userspace path is not tested and should be adjusted
> in follow-up patches.
Great news. Please, test this with Giuseppe's patch to add the kernel
support for nft_compat.
Some comments below:
> Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
> ---
> extensions/GNUmakefile.in | 8 +
> extensions/libebt_802_3.c | 157 +++++++++++++++++++++++++++++
> iptables/Makefile.am | 4 -
> iptables/nft-bridge.c | 6 +
> iptables/nft-bridge.h | 6 +
> iptables/xtables-eb-standalone.c | 32 +-----
> iptables/xtables-eb.c | 204 +++++++++++++++++++++++++++-----------
> libxtables/xtables.c | 13 ++
> 8 files changed, 341 insertions(+), 89 deletions(-)
> create mode 100644 extensions/libebt_802_3.c
>
> diff --git a/extensions/GNUmakefile.in b/extensions/GNUmakefile.in
> index 7b4f891..a2dd4f5 100644
> --- a/extensions/GNUmakefile.in
> +++ b/extensions/GNUmakefile.in
> @@ -60,7 +60,7 @@ pf6_solibs := $(patsubst %,libip6t_%.so,${pf6_build_mod})
> #
> # Building blocks
> #
> -targets := libext.a libext4.a libext6.a matches.man targets.man
> +targets := libext.a libext4.a libext6.a libextb.a matches.man targets.man
> targets_install :=
> @ENABLE_STATIC_TRUE@ libext_objs := ${pfx_objs}
> @ENABLE_STATIC_TRUE@ libextb_objs := ${pfb_objs}
> @@ -80,7 +80,7 @@ install: ${targets_install}
> if test -n "${targets_install}"; then install -pm0755 $^ "${DESTDIR}${xtlibdir}/"; fi;
>
> clean:
> - rm -f *.o *.oo *.so *.a {matches,targets}.man initext.c initext4.c initext6.c;
> + rm -f *.o *.oo *.so *.a {matches,targets}.man initext.c initext4.c initext6.c initextb.c;
> rm -f .*.d .*.dd;
>
> distclean: clean
> @@ -180,8 +180,8 @@ initextb.c: .initextb.dd
> for i in ${initextb_func}; do \
> echo "extern void lib$${i}_init(void);" >>$@; \
> done; \
> - echo "void init_extensions(void);" >>$@; \
> - echo "void init_extensions(void)" >>$@; \
> + echo "void init_extensionsb(void);" >>$@; \
Please, use:
init_ebt_extensions()
instead.
> + echo "void init_extensionsb(void)" >>$@; \
> echo "{" >>$@; \
> for i in ${initextb_func}; do \
> echo " ""lib$${i}_init();" >>$@; \
> diff --git a/extensions/libebt_802_3.c b/extensions/libebt_802_3.c
> new file mode 100644
> index 0000000..34190dd
> --- /dev/null
> +++ b/extensions/libebt_802_3.c
> @@ -0,0 +1,157 @@
> +/* 802_3
> + *
> + * Author:
> + * Chris Vitale <csv@bluetail.com>
> + *
Add a notice here that you have adapted this to the iptables' internal
library. I'd suggest:
Adapted by Arturo Borrero <...@...> to use libxtables for ebtables-compat.
> + * May 2003
> + */
> +
> +#include <stdbool.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <stdlib.h>
> +#include <getopt.h>
> +#include <xtables.h>
> +#include <linux/netfilter_bridge/ebt_802_3.h>
> +
> +#define _802_3_SAP '1'
> +#define _802_3_TYPE '2'
> +
> +static const struct option br802_3_opts[] = {
> + { .name = "802_3-sap", .has_arg = true, .val = _802_3_SAP },
> + { .name = "802_3-type", .has_arg = true, .val = _802_3_TYPE },
> + XT_GETOPT_TABLEEND,
> +};
> +
> +static void br802_3_print_help(void)
> +{
> + printf(
> +"802_3 options:\n"
> +"--802_3-sap [!] protocol : 802.3 DSAP/SSAP- 1 byte value (hex)\n"
> +" DSAP and SSAP are always the same. One SAP applies to both fields\n"
> +"--802_3-type [!] protocol : 802.3 SNAP Type- 2 byte value (hex)\n"
> +" Type implies SAP value 0xaa\n");
> +}
> +
> +static void br802_3_init(struct xt_entry_match *match)
> +{
> + struct ebt_802_3_info *info = (struct ebt_802_3_info *)match->data;
> +
> + info->invflags = 0;
> + info->bitmask = 0;
> +}
> +
> +/*static int parse(int c, char **argv, int argc, const struct ebt_u_entry *entry,
> + unsigned int *flags, struct ebt_entry_match **match)*/
> +static int
> +br802_3_parse(int c, char **argv, int invert, unsigned int *flags,
> + const void *entry, struct xt_entry_match **match)
> +{
> + struct ebt_802_3_info *info = (struct ebt_802_3_info *) (*match)->data;
> + unsigned int i;
> + char *end;
> +
> + switch (c) {
> + case _802_3_SAP:
> + if (invert)
> + info->invflags |= EBT_802_3_SAP;
> + i = strtoul(optarg, &end, 16);
> + if (i > 255 || *end != '\0')
> + xtables_error(PARAMETER_PROBLEM,
> + "Problem with specified "
> + "sap hex value, %x",i);
> + info->sap = i; /* one byte, so no byte order worries */
> + info->bitmask |= EBT_802_3_SAP;
> + break;
> + case _802_3_TYPE:
> + if (invert)
> + info->invflags |= EBT_802_3_TYPE;
> + i = strtoul(optarg, &end, 16);
> + if (i > 65535 || *end != '\0') {
> + xtables_error(PARAMETER_PROBLEM,
> + "Problem with the specified "
> + "type hex value, %x",i);
> + }
> + info->type = htons(i);
> + info->bitmask |= EBT_802_3_TYPE;
> + break;
> + default:
> + return 0;
> + }
> + return 1;
> +}
> +
> +static void
> +br802_3_final_check(unsigned int flags)
> +{
> + /*if (!(entry->bitmask & EBT_802_3))
> + ebt_print_error("For 802.3 DSAP/SSAP filtering the protocol "
> + "must be LENGTH");
> + */
> + if (!flags)
> + xtables_error(PARAMETER_PROBLEM,
> + "You must specify proper arguments");
> +}
> +
> +/*static void print(const struct ebt_u_entry *entry,
> + const struct ebt_entry_match *match)*/
> +static void br802_3_print(const void *ip, const struct xt_entry_match *match,
> + int numeric)
> +{
> + struct ebt_802_3_info *info = (struct ebt_802_3_info *)match->data;
> +
> + if (info->bitmask & EBT_802_3_SAP) {
> + printf("--802_3-sap ");
> + if (info->invflags & EBT_802_3_SAP)
> + printf("! ");
> + printf("0x%.2x ", info->sap);
> + }
> + if (info->bitmask & EBT_802_3_TYPE) {
> + printf("--802_3-type ");
> + if (info->invflags & EBT_802_3_TYPE)
> + printf("! ");
> + printf("0x%.4x ", ntohs(info->type));
> + }
> +}
> +/*
> +static int compare(const struct ebt_entry_match *m1,
> + const struct ebt_entry_match *m2)
> +{
> + struct ebt_802_3_info *info1 = (struct ebt_802_3_info *)m1->data;
> + struct ebt_802_3_info *info2 = (struct ebt_802_3_info *)m2->data;
> +
> + if (info1->bitmask != info2->bitmask)
> + return 0;
> + if (info1->invflags != info2->invflags)
> + return 0;
> + if (info1->bitmask & EBT_802_3_SAP) {
> + if (info1->sap != info2->sap)
> + return 0;
> + }
> + if (info1->bitmask & EBT_802_3_TYPE) {
> + if (info1->type != info2->type)
> + return 0;
> + }
> + return 1;
> +}
> +*/
> +static struct xtables_match br802_3_match =
> +{
> + .name = "802_3",
> + .revision = 0,
> + .version = XTABLES_VERSION,
> + .family = NFPROTO_BRIDGE,
> + .size = XT_ALIGN(sizeof(struct ebt_802_3_info)),
> + .userspacesize = XT_ALIGN(sizeof(struct ebt_802_3_info)),
> + .init = br802_3_init,
> + .help = br802_3_print_help,
> + .parse = br802_3_parse,
> + .final_check = br802_3_final_check,
> + .print = br802_3_print,
> + .extra_opts = br802_3_opts,
> +};
> +
> +void _init(void)
> +{
> + xtables_register_match(&br802_3_match);
> +}
> diff --git a/iptables/Makefile.am b/iptables/Makefile.am
> index b3e417b..d8a55b2 100644
> --- a/iptables/Makefile.am
> +++ b/iptables/Makefile.am
> @@ -29,7 +29,7 @@ xtables_multi_LDADD += ../libxtables/libxtables.la -lm
> if ENABLE_NFTABLES
> xtables_compat_multi_SOURCES = xtables-compat-multi.c iptables-xml.c
> xtables_compat_multi_CFLAGS = ${AM_CFLAGS}
> -xtables_compat_multi_LDADD = ../extensions/libext.a
> +xtables_compat_multi_LDADD = ../extensions/libext.a ../extensions/libextb.a
libext_ebt.a ?
> if ENABLE_STATIC
> xtables_compat_multi_CFLAGS += -DALL_INCLUSIVE
> endif
> @@ -42,7 +42,7 @@ xtables_compat_multi_SOURCES += xtables-save.c xtables-restore.c \
> xtables-arp-standalone.c xtables-arp.c \
> getethertype.c nft-bridge.c \
> xtables-eb-standalone.c xtables-eb.c
> -xtables_compat_multi_LDADD += ${libmnl_LIBS} ${libnftnl_LIBS} ../extensions/libext4.a ../extensions/libext6.a
> +xtables_compat_multi_LDADD += ${libmnl_LIBS} ${libnftnl_LIBS} ../extensions/libext4.a ../extensions/libext6.a ../extensions/libextb.a
> # yacc and lex generate dirty code
> xtables_compat_multi-xtables-config-parser.o xtables_compat_multi-xtables-config-syntax.o: AM_CFLAGS += -Wno-missing-prototypes -Wno-missing-declarations -Wno-implicit-function-declaration -Wno-nested-externs -Wno-undef -Wno-redundant-decls
> xtables_compat_multi_SOURCES += xshared.c
> diff --git a/iptables/nft-bridge.c b/iptables/nft-bridge.c
> index a1bd906..9772b5f 100644
> --- a/iptables/nft-bridge.c
> +++ b/iptables/nft-bridge.c
> @@ -135,6 +135,7 @@ static int _add_action(struct nft_rule *r, struct ebtables_command_state *cs)
> static int nft_bridge_add(struct nft_rule *r, void *data)
> {
> struct ebtables_command_state *cs = data;
> + struct xtables_rule_match *matchp;
> struct ebt_entry *fw = &cs->fw;
> uint32_t op;
> char *addr;
> @@ -179,6 +180,11 @@ static int nft_bridge_add(struct nft_rule *r, void *data)
> add_cmp_u16(r, fw->ethproto, op);
> }
>
> + for (matchp = cs->matches; matchp; matchp = matchp->next) {
> + if (add_match(r, matchp->match->m) < 0)
> + break;
> + }
> +
> return _add_action(r, cs);
> }
>
> diff --git a/iptables/nft-bridge.h b/iptables/nft-bridge.h
> index 1e3f0a1..fd8bc9f 100644
> --- a/iptables/nft-bridge.h
> +++ b/iptables/nft-bridge.h
> @@ -90,6 +90,12 @@ struct ebtables_command_state {
> struct xtables_rule_match *matches;
> const char *jumpto;
> struct xt_counters counters;
> + int invert;
> + int c;
> + char **argv;
> + int proto_used;
> + char *protocol;
> + unsigned int options;
> };
>
> void nft_rule_to_ebtables_command_state(struct nft_rule *r,
> diff --git a/iptables/xtables-eb-standalone.c b/iptables/xtables-eb-standalone.c
> index 1c3cbf0..914d137 100644
> --- a/iptables/xtables-eb-standalone.c
> +++ b/iptables/xtables-eb-standalone.c
> @@ -36,22 +36,12 @@
> #include <errno.h>
> #include <string.h>
> #include <xtables.h>
> +#include <iptables.h>
> #include "nft.h"
>
> #include "xtables-multi.h"
>
> -extern struct xtables_globals xtables_globals;
> -extern const char *program_version, *program_name;
> -
> -static const struct xtables_afinfo afinfo_bridge = {
> - .kmod = "eb_tables",
> - .proc_exists = "/proc/net/eb_tables_names",
> - .libprefix = "libeb_",
> - .family = NFPROTO_BRIDGE,
> - .ipproto = IPPROTO_IP,
> - .so_rev_match = -1,
> - .so_rev_target = -1,
> -};
> +extern struct xtables_globals ebtables_globals;
>
> int xtables_eb_main(int argc, char *argv[])
> {
> @@ -61,24 +51,18 @@ int xtables_eb_main(int argc, char *argv[])
> .family = NFPROTO_BRIDGE,
> };
>
> - xtables_globals.program_name = "ebtables";
> - /* This code below could be replaced by xtables_init_all, which
> - * doesn't support NFPROTO_BRIDGE yet.
> - */
> - xtables_init();
> - afinfo = &afinfo_bridge;
> - ret = xtables_set_params(&xtables_globals);
> + ebtables_globals.program_name = "ebtables";
> + ret = xtables_init_all(&ebtables_globals, NFPROTO_BRIDGE);
> if (ret < 0) {
> - fprintf(stderr, "%s/%s Failed to initialize xtables\n",
> - xtables_globals.program_name,
> - xtables_globals.program_version);
> + fprintf(stderr, "%s/%s Failed to initialize ebtables-compat\n",
> + ebtables_globals.program_name,
> + ebtables_globals.program_version);
> exit(1);
> }
>
> #if defined(ALL_INCLUSIVE) || defined(NO_SHARED_LIBS)
> - init_extensions();
> + init_extensionsb();
> #endif
> -
> ret = do_commandeb(&h, argc, argv, &table);
> if (ret)
> ret = nft_commit(&h);
> diff --git a/iptables/xtables-eb.c b/iptables/xtables-eb.c
> index 51811cf..c879be7 100644
> --- a/iptables/xtables-eb.c
> +++ b/iptables/xtables-eb.c
> @@ -30,6 +30,7 @@
> #include <signal.h>
> #include <net/if.h>
> #include <netinet/ether.h>
> +#include <iptables.h>
> #include <xtables.h>
>
> #include <linux/netfilter_bridge.h>
> @@ -39,10 +40,6 @@
> #include "nft.h"
> #include "nft-bridge.h"
>
> -extern struct xtables_globals xtables_globals;
> -#define prog_name xtables_globals.program_name
> -#define prog_vers xtables_globals.program_version
> -
> /*
> * From include/ebtables_u.h
> */
> @@ -141,44 +138,6 @@ static int ebt_check_inverse2(const char option[], int argc, char **argv)
> }
>
> /*
> - * From libebtc.c
> - */
> -
> -/* The four target names, from libebtc.c */
> -const char* ebt_standard_targets[NUM_STANDARD_TARGETS] =
> -{
> - "ACCEPT",
> - "DROP",
> - "CONTINUE",
> - "RETURN",
> -};
> -
> -/* Prints all registered extensions */
> -static void ebt_list_extensions(const struct xtables_target *t,
> - const struct xtables_rule_match *m)
> -{
> - printf("%s v%s\n", prog_name, prog_vers);
> - printf("Loaded userspace extensions:\n");
> - /*printf("\nLoaded tables:\n");
> - while (tbl) {
> - printf("%s\n", tbl->name);
> - tbl = tbl->next;
> - }*/
> - printf("\nLoaded targets:\n");
> - for (t = xtables_targets; t; t = t->next) {
> - printf("%s\n", t->name);
> - }
> - printf("\nLoaded matches:\n");
> - for (; m != NULL; m = m->next)
> - printf("%s\n", m->match->name);
> - /*printf("\nLoaded watchers:\n");
> - while (w) {
> - printf("%s\n", w->name);
> - w = w->next;
> - }*/
> -}
> -
> -/*
> * Glue code to use libxtables
> */
> static int parse_rule_number(const char *rule)
> @@ -341,8 +300,119 @@ static struct option ebt_original_options[] =
> { 0 }
> };
>
> +void xtables_exit_error(enum xtables_exittype status, const char *msg, ...) __attribute__((noreturn, format(printf,2,3)));
> +
> static struct option *ebt_options = ebt_original_options;
>
> +struct xtables_globals ebtables_globals = {
> + .option_offset = 0,
> + .program_version = IPTABLES_VERSION,
> + .orig_opts = ebt_original_options,
> + .exit_err = xtables_exit_error,
> + .compat_rev = nft_compatible_revision,
> +};
> +
> +#define opts ebtables_globals.opts
> +#define prog_name ebtables_globals.program_name
> +#define prog_vers ebtables_globals.program_version
> +
> +/*
> + * From libebtc.c
> + */
> +
> +/* The four target names, from libebtc.c */
> +const char* ebt_standard_targets[NUM_STANDARD_TARGETS] =
> +{
> + "ACCEPT",
> + "DROP",
> + "CONTINUE",
> + "RETURN",
> +};
> +
> +/* Prints all registered extensions */
> +static void ebt_list_extensions(const struct xtables_target *t,
> + const struct xtables_rule_match *m)
> +{
> + printf("%s v%s\n", prog_name, prog_vers);
> + printf("Loaded userspace extensions:\n");
> + /*printf("\nLoaded tables:\n");
> + while (tbl) {
> + printf("%s\n", tbl->name);
> + tbl = tbl->next;
> + }*/
> + printf("\nLoaded targets:\n");
> + for (t = xtables_targets; t; t = t->next) {
> + printf("%s\n", t->name);
> + }
> + printf("\nLoaded matches:\n");
> + for (; m != NULL; m = m->next)
> + printf("%s\n", m->match->name);
> + /*printf("\nLoaded watchers:\n");
> + while (w) {
> + printf("%s\n", w->name);
> + w = w->next;
> + }*/
> +}
> +
> +#define OPTION_OFFSET 256
> +static struct option *merge_options(struct option *oldopts,
> + const struct option *newopts,
> + unsigned int *options_offset)
> +{
> + unsigned int num_old, num_new, i;
> + struct option *merge;
> +
> + if (!newopts || !oldopts || !options_offset)
> + xtables_error(OTHER_PROBLEM, "merge wrong");
> + for (num_old = 0; oldopts[num_old].name; num_old++);
> + for (num_new = 0; newopts[num_new].name; num_new++);
> +
> + ebtables_globals.option_offset += OPTION_OFFSET;
> + *options_offset = ebtables_globals.option_offset;
> +
> + merge = malloc(sizeof(struct option) * (num_new + num_old + 1));
> + if (!merge)
> + return NULL;
> + memcpy(merge, oldopts, num_old * sizeof(struct option));
> + for (i = 0; i < num_new; i++) {
> + merge[num_old + i] = newopts[i];
> + merge[num_old + i].val += *options_offset;
> + }
> + memset(merge + num_old + num_new, 0, sizeof(struct option));
> + /* Only free dynamically allocated stuff */
> + if (oldopts != ebt_original_options)
> + free(oldopts);
> +
> + return merge;
> +}
> +
> +/* manually registering ebt matches, given the original ebtables parser
> + * don't use '-m matchname' and the match can't loaded dinamically when
> + * the user calls it.
> + * This code is very similar to iptables/xtables.c:command_match()
> + */
> +static void load_matches(void)
> +{
> + struct xtables_match *m;
> + size_t size;
> + opts = ebt_original_options;
> +
> + m = xtables_find_match("802_3", XTF_LOAD_MUST_SUCCEED, NULL);
> + if (m == NULL)
> + xtables_error(OTHER_PROBLEM, "Unable to load 802_3 match");
> +
> + size = XT_ALIGN(sizeof(struct xt_entry_match)) + m->size;
> + m->m = xtables_calloc(1, size);
> + m->m->u.match_size = size;
> + strcpy(m->m->u.user.name, m->name);
> + m->m->u.user.revision = m->revision;
> + xs_init_match(m);
> +
> + opts = merge_options(opts, m->extra_opts, &m->option_offset);
> + if (opts == NULL)
> + xtables_error(OTHER_PROBLEM, "Can't alloc memory");
> +}
You can abstract this function to:
void ebt_load_match(const char *name)
so you can use it from:
static void ebt_load_matches(void)
{
ebt_load_match("802_3");
...
}
> /*
> * More glue code.
> */
I'd suggest you to move the new code above for extension / option
handling here, after this "More glue code" notice. Since this doesn't
originally belongs to libebt.c
prev parent reply other threads:[~2014-12-10 12:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-10 12:36 [RFC ebtables-compat PATCH] extensions: add ebt 802_3 extension Arturo Borrero Gonzalez
2014-12-10 12:58 ` Pablo Neira Ayuso [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141210125807.GA4198@salvia \
--to=pablo@netfilter.org \
--cc=arturo.borrero.glez@gmail.com \
--cc=giuseppelng@gmail.com \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).