From: Florian Westphal <fw@strlen.de>
To: <netfilter-devel@vger.kernel.org>
Cc: Florian Westphal <fw@strlen.de>
Subject: [PATCH v2 nf 8/9] netfilter: x_tables: use pr ratelimiting in matches/targets
Date: Fri, 9 Feb 2018 15:52:06 +0100 [thread overview]
Message-ID: <20180209145207.2097-9-fw@strlen.de> (raw)
In-Reply-To: <20180209145207.2097-1-fw@strlen.de>
all of these print simple error message - use single pr_ratelimit call.
checkpatch complains about lines > 80 but this would require splitting
several "literals" over multiple lines which is worse.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/netfilter/xt_HMARK.c | 17 +++++++++++------
net/netfilter/xt_addrtype.c | 33 ++++++++++++++++-----------------
net/netfilter/xt_policy.c | 23 +++++++++++++----------
3 files changed, 40 insertions(+), 33 deletions(-)
diff --git a/net/netfilter/xt_HMARK.c b/net/netfilter/xt_HMARK.c
index dd08cc1f86c7..9c75f419cd80 100644
--- a/net/netfilter/xt_HMARK.c
+++ b/net/netfilter/xt_HMARK.c
@@ -9,6 +9,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/icmp.h>
@@ -312,15 +314,15 @@ hmark_tg_v4(struct sk_buff *skb, const struct xt_action_param *par)
static int hmark_tg_check(const struct xt_tgchk_param *par)
{
const struct xt_hmark_info *info = par->targinfo;
+ const char *errmsg = "proto mask must be zero with L3 mode";
if (!info->hmodulus)
return -EINVAL;
if (info->proto_mask &&
- (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))) {
- pr_info("xt_HMARK: proto mask must be zero with L3 mode\n");
- return -EINVAL;
- }
+ (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3)))
+ goto err;
+
if (info->flags & XT_HMARK_FLAG(XT_HMARK_SPI_MASK) &&
(info->flags & (XT_HMARK_FLAG(XT_HMARK_SPORT_MASK) |
XT_HMARK_FLAG(XT_HMARK_DPORT_MASK))))
@@ -329,10 +331,13 @@ static int hmark_tg_check(const struct xt_tgchk_param *par)
if (info->flags & XT_HMARK_FLAG(XT_HMARK_SPI) &&
(info->flags & (XT_HMARK_FLAG(XT_HMARK_SPORT) |
XT_HMARK_FLAG(XT_HMARK_DPORT)))) {
- pr_info("xt_HMARK: spi-set and port-set can't be combined\n");
- return -EINVAL;
+ errmsg = "spi-set and port-set can't be combined";
+ goto err;
}
return 0;
+err:
+ pr_info_ratelimited("%s\n", errmsg);
+ return -EINVAL;
}
static struct xt_target hmark_tg_reg[] __read_mostly = {
diff --git a/net/netfilter/xt_addrtype.c b/net/netfilter/xt_addrtype.c
index 911a7c0da504..89e281b3bfc2 100644
--- a/net/netfilter/xt_addrtype.c
+++ b/net/netfilter/xt_addrtype.c
@@ -164,48 +164,47 @@ addrtype_mt_v1(const struct sk_buff *skb, struct xt_action_param *par)
static int addrtype_mt_checkentry_v1(const struct xt_mtchk_param *par)
{
+ const char *errmsg = "both incoming and outgoing interface limitation cannot be selected";
struct xt_addrtype_info_v1 *info = par->matchinfo;
if (info->flags & XT_ADDRTYPE_LIMIT_IFACE_IN &&
- info->flags & XT_ADDRTYPE_LIMIT_IFACE_OUT) {
- pr_info("both incoming and outgoing "
- "interface limitation cannot be selected\n");
- return -EINVAL;
- }
+ info->flags & XT_ADDRTYPE_LIMIT_IFACE_OUT)
+ goto err;
if (par->hook_mask & ((1 << NF_INET_PRE_ROUTING) |
(1 << NF_INET_LOCAL_IN)) &&
info->flags & XT_ADDRTYPE_LIMIT_IFACE_OUT) {
- pr_info("output interface limitation "
- "not valid in PREROUTING and INPUT\n");
- return -EINVAL;
+ errmsg = "output interface limitation not valid in PREROUTING and INPUT";
+ goto err;
}
if (par->hook_mask & ((1 << NF_INET_POST_ROUTING) |
(1 << NF_INET_LOCAL_OUT)) &&
info->flags & XT_ADDRTYPE_LIMIT_IFACE_IN) {
- pr_info("input interface limitation "
- "not valid in POSTROUTING and OUTPUT\n");
- return -EINVAL;
+ errmsg = "input interface limitation not valid in POSTROUTING and OUTPUT";
+ goto err;
}
#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
if (par->family == NFPROTO_IPV6) {
if ((info->source | info->dest) & XT_ADDRTYPE_BLACKHOLE) {
- pr_err("ipv6 BLACKHOLE matching not supported\n");
- return -EINVAL;
+ errmsg = "ipv6 BLACKHOLE matching not supported";
+ goto err;
}
if ((info->source | info->dest) >= XT_ADDRTYPE_PROHIBIT) {
- pr_err("ipv6 PROHIBIT (THROW, NAT ..) matching not supported\n");
- return -EINVAL;
+ errmsg = "ipv6 PROHIBIT (THROW, NAT ..) matching not supported";
+ goto err;
}
if ((info->source | info->dest) & XT_ADDRTYPE_BROADCAST) {
- pr_err("ipv6 does not support BROADCAST matching\n");
- return -EINVAL;
+ errmsg = "ipv6 does not support BROADCAST matching";
+ goto err;
}
}
#endif
return 0;
+err:
+ pr_info_ratelimited("%s\n", errmsg);
+ return -EINVAL;
}
static struct xt_match addrtype_mt_reg[] __read_mostly = {
diff --git a/net/netfilter/xt_policy.c b/net/netfilter/xt_policy.c
index 5639fb03bdd9..13f8ccf946d6 100644
--- a/net/netfilter/xt_policy.c
+++ b/net/netfilter/xt_policy.c
@@ -132,26 +132,29 @@ policy_mt(const struct sk_buff *skb, struct xt_action_param *par)
static int policy_mt_check(const struct xt_mtchk_param *par)
{
const struct xt_policy_info *info = par->matchinfo;
+ const char *errmsg = "neither incoming nor outgoing policy selected";
+
+ if (!(info->flags & (XT_POLICY_MATCH_IN|XT_POLICY_MATCH_OUT)))
+ goto err;
- if (!(info->flags & (XT_POLICY_MATCH_IN|XT_POLICY_MATCH_OUT))) {
- pr_info("neither incoming nor outgoing policy selected\n");
- return -EINVAL;
- }
if (par->hook_mask & ((1 << NF_INET_PRE_ROUTING) |
(1 << NF_INET_LOCAL_IN)) && info->flags & XT_POLICY_MATCH_OUT) {
- pr_info("output policy not valid in PREROUTING and INPUT\n");
- return -EINVAL;
+ errmsg = "output policy not valid in PREROUTING and INPUT";
+ goto err;
}
if (par->hook_mask & ((1 << NF_INET_POST_ROUTING) |
(1 << NF_INET_LOCAL_OUT)) && info->flags & XT_POLICY_MATCH_IN) {
- pr_info("input policy not valid in POSTROUTING and OUTPUT\n");
- return -EINVAL;
+ errmsg = "input policy not valid in POSTROUTING and OUTPUT";
+ goto err;
}
if (info->len > XT_POLICY_MAX_ELEM) {
- pr_info("too many policy elements\n");
- return -EINVAL;
+ errmsg = "too many policy elements";
+ goto err;
}
return 0;
+err:
+ pr_info_ratelimited("%s\n", errmsg);
+ return -EINVAL;
}
static struct xt_match policy_mt_reg[] __read_mostly = {
--
2.13.6
next prev parent reply other threads:[~2018-02-09 14:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-09 14:51 [PATCH v2 nf 0/9] netfilter: x_tables: use printk ratelimiting Florian Westphal
2018-02-09 14:51 ` [PATCH v2 nf 1/9] netfilter: x_tables: remove pr_info where possible Florian Westphal
2018-02-09 14:52 ` [PATCH v2 nf 2/9] netfilter: x_tables: use pr ratelimiting in xt core Florian Westphal
2018-02-09 14:52 ` [PATCH v2 nf 3/9] netfilter: xt_CT: use pr ratelimiting Florian Westphal
2018-02-09 14:52 ` [PATCH v2 nf 4/9] netfilter: xt_NFQUEUE: " Florian Westphal
2018-02-09 14:52 ` [PATCH v2 nf 5/9] netfilter: xt_set: " Florian Westphal
2018-02-09 14:52 ` [PATCH v2 nf 6/9] netfilter: bridge: " Florian Westphal
2018-02-09 14:52 ` [PATCH v2 nf 7/9] netfilter: x_tables: rate-limit table mismatch warnings Florian Westphal
2018-02-09 14:52 ` Florian Westphal [this message]
2018-02-09 14:52 ` [PATCH v2 nf 9/9] netfilter: x_tables: use pr ratelimiting in all remaining spots Florian Westphal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180209145207.2097-9-fw@strlen.de \
--to=fw@strlen.de \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).