netfilter-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Phil Sutter <phil@nwl.cc>
To: netfilter-devel@vger.kernel.org
Subject: [iptables PATCH 2/9] tests: shell: Add some more rules to 0002-verbose-output_0
Date: Wed,  8 Jun 2022 18:27:05 +0200	[thread overview]
Message-ID: <20220608162712.31202-3-phil@nwl.cc> (raw)
In-Reply-To: <20220608162712.31202-1-phil@nwl.cc>

This increases coverage of function print_match() from 0 to 86.6%.

Signed-off-by: Phil Sutter <phil@nwl.cc>
---
 .../testcases/ip6tables/0002-verbose-output_0     | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/iptables/tests/shell/testcases/ip6tables/0002-verbose-output_0 b/iptables/tests/shell/testcases/ip6tables/0002-verbose-output_0
index 7b0e64686c6b6..7624cbab655ad 100755
--- a/iptables/tests/shell/testcases/ip6tables/0002-verbose-output_0
+++ b/iptables/tests/shell/testcases/ip6tables/0002-verbose-output_0
@@ -9,12 +9,24 @@ RULE1='-i eth2 -o eth3 -s feed:babe::1 -d feed:babe::2 -j ACCEPT'
 VOUT1='ACCEPT  all opt    in eth2 out eth3  feed:babe::1  -> feed:babe::2'
 RULE2='-i eth2 -o eth3 -s feed:babe::4 -d feed:babe::5 -j ACCEPT'
 VOUT2='ACCEPT  all opt    in eth2 out eth3  feed:babe::4  -> feed:babe::5'
+RULE3='-p icmpv6 -m icmp6 --icmpv6-type no-route'
+VOUT3='  ipv6-icmp opt    in * out *  ::/0  -> ::/0   ipv6-icmptype 1 code 0'
+RULE4='-m dst --dst-len 42 -m rt --rt-type 23'
+VOUT4='  all opt    in * out *  ::/0  -> ::/0   dst length:42  rt type:23'
+RULE5='-m frag --fragid 1337 -j LOG'
+VOUT5='LOG  all opt    in * out *  ::/0  -> ::/0   frag id:1337 LOG flags 0 level 4'
 
 diff -u -Z <(echo -e "$VOUT1") <($XT_MULTI ip6tables -v -A FORWARD $RULE1)
 diff -u -Z <(echo -e "$VOUT2") <($XT_MULTI ip6tables -v -I FORWARD 2 $RULE2)
+diff -u -Z <(echo -e "$VOUT3") <($XT_MULTI ip6tables -v -A FORWARD $RULE3)
+diff -u -Z <(echo -e "$VOUT4") <($XT_MULTI ip6tables -v -A FORWARD $RULE4)
+diff -u -Z <(echo -e "$VOUT5") <($XT_MULTI ip6tables -v -A FORWARD $RULE5)
 
 diff -u -Z <(echo -e "$VOUT1") <($XT_MULTI ip6tables -v -C FORWARD $RULE1)
 diff -u -Z <(echo -e "$VOUT2") <($XT_MULTI ip6tables -v -C FORWARD $RULE2)
+diff -u -Z <(echo -e "$VOUT3") <($XT_MULTI ip6tables -v -C FORWARD $RULE3)
+diff -u -Z <(echo -e "$VOUT4") <($XT_MULTI ip6tables -v -C FORWARD $RULE4)
+diff -u -Z <(echo -e "$VOUT5") <($XT_MULTI ip6tables -v -C FORWARD $RULE5)
 
 EXPECT='Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
  pkts bytes target     prot opt in     out     source               destination
@@ -23,6 +35,9 @@ Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
  pkts bytes target     prot opt in     out     source               destination
     0     0 ACCEPT     all      eth2   eth3    feed:babe::1         feed:babe::2
     0     0 ACCEPT     all      eth2   eth3    feed:babe::4         feed:babe::5
+    0     0            ipv6-icmp    *      *       ::/0                 ::/0                 ipv6-icmptype 1 code 0
+    0     0            all      *      *       ::/0                 ::/0                 dst length:42  rt type:23
+    0     0 LOG        all      *      *       ::/0                 ::/0                 frag id:1337 LOG flags 0 level 4
 
 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
  pkts bytes target     prot opt in     out     source               destination'
-- 
2.34.1


  parent reply	other threads:[~2022-06-08 16:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-08 16:27 [iptables PATCH 0/9] Improve testsuites' code coverage Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 1/9] Makefile: Add --enable-profiling configure option Phil Sutter
2022-06-08 16:27 ` Phil Sutter [this message]
2022-06-08 16:27 ` [iptables PATCH 3/9] tests: shell: Extend iptables-xml test a bit Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 4/9] tests: shell: Extend zero counters test a bit further Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 5/9] extensions: libebt_standard.t: Test logical-{in,out} as well Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 6/9] ebtables-restore: Deny --init-table Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 7/9] extensions: string: Do not print default --to value Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 8/9] extensions: string: Review parse_string() function Phil Sutter
2022-06-08 16:27 ` [iptables PATCH 9/9] extensions: string: Fix and enable tests Phil Sutter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220608162712.31202-3-phil@nwl.cc \
    --to=phil@nwl.cc \
    --cc=netfilter-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).