From: Phil Sutter <phil@nwl.cc>
To: Florian Westphal <fw@strlen.de>
Cc: netfilter-devel@vger.kernel.org
Subject: [iptables PATCH] ebtables: Fix among match
Date: Wed, 28 Sep 2022 15:55:24 +0200 [thread overview]
Message-ID: <20220928135524.22822-1-phil@nwl.cc> (raw)
Fixed commit broke among match in two ways:
1) The two lookup sizes are 12 and 6, not 12 and 4 - among supports
either ether+IP or ether only, not IP only.
2) Adding two to sreg_count to get the second register is too simple: It
works only for four byte regs, not the 16 byte ones. The first
register is always a 16 byte one, though.
Fixing (1) is trivial, fix (2) by introduction of nft_get_next_reg()
doing the right thing. For consistency, use it for among match creation,
too.
Fixes: f315af1cf8871 ("nft: track each register individually")
Signed-off-by: Phil Sutter <phil@nwl.cc>
---
iptables/nft-bridge.c | 4 ++--
iptables/nft-shared.c | 16 ++++++++++++++++
iptables/nft-shared.h | 5 +++++
iptables/nft.c | 6 ++----
4 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/iptables/nft-bridge.c b/iptables/nft-bridge.c
index 659c5b58ba633..596dfdf8991f1 100644
--- a/iptables/nft-bridge.c
+++ b/iptables/nft-bridge.c
@@ -349,7 +349,7 @@ static int lookup_analyze_payloads(struct nft_xt_ctx *ctx,
return -1;
}
- sreg_count += 2;
+ sreg_count = nft_get_next_reg(sreg_count, ETH_ALEN);
reg = nft_xt_ctx_get_sreg(ctx, sreg_count);
if (!reg) {
@@ -375,7 +375,7 @@ static int lookup_analyze_payloads(struct nft_xt_ctx *ctx,
return -1;
}
break;
- case 4: /* ipv4addr */
+ case 6: /* ether */
val = lookup_check_ether_payload(reg->payload.base,
reg->payload.offset,
reg->payload.len);
diff --git a/iptables/nft-shared.c b/iptables/nft-shared.c
index f8de2b715dd61..909fe6483205c 100644
--- a/iptables/nft-shared.c
+++ b/iptables/nft-shared.c
@@ -10,6 +10,7 @@
* This code has been sponsored by Sophos Astaro <http://www.sophos.com>
*/
+#include <assert.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
@@ -1603,3 +1604,18 @@ int nft_parse_hl(struct nft_xt_ctx *ctx,
return 0;
}
+
+enum nft_registers nft_get_next_reg(enum nft_registers reg, size_t size)
+{
+ /* convert size to NETLINK_ALIGN-sized chunks */
+ size = (size + NETLINK_ALIGN - 1) / NETLINK_ALIGN;
+
+ /* map 16byte reg to 4byte one */
+ if (reg < __NFT_REG_MAX)
+ reg = NFT_REG32_00 + (reg - 1) * NFT_REG_SIZE / NFT_REG32_SIZE;
+
+ reg += size;
+ assert(reg <= NFT_REG32_15);
+
+ return reg;
+}
diff --git a/iptables/nft-shared.h b/iptables/nft-shared.h
index 8fcedcdd78fbe..c07d3270a407e 100644
--- a/iptables/nft-shared.h
+++ b/iptables/nft-shared.h
@@ -276,4 +276,9 @@ int nft_parse_hl(struct nft_xt_ctx *ctx, struct nftnl_expr *e, struct iptables_c
#define min(x, y) ((x) < (y) ? (x) : (y))
#define max(x, y) ((x) > (y) ? (x) : (y))
+/* simplified nftables:include/netlink.h, netlink_padded_len() */
+#define NETLINK_ALIGN 4
+
+enum nft_registers nft_get_next_reg(enum nft_registers reg, size_t size);
+
#endif
diff --git a/iptables/nft.c b/iptables/nft.c
index 2165733ff74e9..09cb19c987322 100644
--- a/iptables/nft.c
+++ b/iptables/nft.c
@@ -1133,9 +1133,6 @@ gen_lookup(uint32_t sreg, const char *set_name, uint32_t set_id, uint32_t flags)
return e;
}
-/* simplified nftables:include/netlink.h, netlink_padded_len() */
-#define NETLINK_ALIGN 4
-
/* from nftables:include/datatype.h, TYPE_BITS */
#define CONCAT_TYPE_BITS 6
@@ -1208,8 +1205,9 @@ static int __add_nft_among(struct nft_handle *h, const char *table,
nftnl_rule_add_expr(r, e);
if (ip) {
+ reg = nft_get_next_reg(reg, ETH_ALEN);
e = __gen_payload(NFT_PAYLOAD_NETWORK_HEADER, ip_addr_off[dst],
- sizeof(struct in_addr), NFT_REG32_02);
+ sizeof(struct in_addr), reg);
if (!e)
return -ENOMEM;
nftnl_rule_add_expr(r, e);
--
2.34.1
next reply other threads:[~2022-09-28 13:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 13:55 Phil Sutter [this message]
2022-09-28 15:24 ` [iptables PATCH] ebtables: Fix among match Florian Westphal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928135524.22822-1-phil@nwl.cc \
--to=phil@nwl.cc \
--cc=fw@strlen.de \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).