From: Phil Sutter <phil@nwl.cc>
To: netfilter-devel@vger.kernel.org
Subject: [iptables PATCH 02/23] libxtables: xtoptions: Support XTOPT_NBO with XTTYPE_UINT*
Date: Wed, 20 Dec 2023 17:06:15 +0100 [thread overview]
Message-ID: <20231220160636.11778-3-phil@nwl.cc> (raw)
In-Reply-To: <20231220160636.11778-1-phil@nwl.cc>
Value conversion into Big Endian byteorder is pretty straightforward,
merely needed a small helper for uint64.
Signed-off-by: Phil Sutter <phil@nwl.cc>
---
libxtables/xtoptions.c | 40 +++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/libxtables/xtoptions.c b/libxtables/xtoptions.c
index 9694639188006..3973c807ded0e 100644
--- a/libxtables/xtoptions.c
+++ b/libxtables/xtoptions.c
@@ -147,6 +147,14 @@ static size_t xtopt_esize_by_type(enum xt_option_type type)
}
}
+static uint64_t htonll(uint64_t val)
+{
+ uint32_t high = val >> 32;
+ uint32_t low = val & UINT32_MAX;
+
+ return (uint64_t)htonl(low) << 32 | htonl(high);
+}
+
/**
* Require a simple integer.
*/
@@ -174,14 +182,20 @@ static void xtopt_parse_int(struct xt_option_call *cb)
*(uint8_t *)XTOPT_MKPTR(cb) = cb->val.u8;
} else if (entry->type == XTTYPE_UINT16) {
cb->val.u16 = value;
+ if (entry->flags & XTOPT_NBO)
+ cb->val.u16 = htons(cb->val.u16);
if (entry->flags & XTOPT_PUT)
*(uint16_t *)XTOPT_MKPTR(cb) = cb->val.u16;
} else if (entry->type == XTTYPE_UINT32) {
cb->val.u32 = value;
+ if (entry->flags & XTOPT_NBO)
+ cb->val.u32 = htonl(cb->val.u32);
if (entry->flags & XTOPT_PUT)
*(uint32_t *)XTOPT_MKPTR(cb) = cb->val.u32;
} else if (entry->type == XTTYPE_UINT64) {
cb->val.u64 = value;
+ if (entry->flags & XTOPT_NBO)
+ cb->val.u64 = htonll(cb->val.u64);
if (entry->flags & XTOPT_PUT)
*(uint64_t *)XTOPT_MKPTR(cb) = cb->val.u64;
}
@@ -216,17 +230,25 @@ static void xtopt_parse_float(struct xt_option_call *cb)
static void xtopt_mint_value_to_cb(struct xt_option_call *cb, uintmax_t value)
{
const struct xt_option_entry *entry = cb->entry;
+ int i = cb->nvals;
- if (cb->nvals >= ARRAY_SIZE(cb->val.u32_range))
+ if (i >= ARRAY_SIZE(cb->val.u32_range))
return;
- if (entry->type == XTTYPE_UINT8RC)
- cb->val.u8_range[cb->nvals] = value;
- else if (entry->type == XTTYPE_UINT16RC)
- cb->val.u16_range[cb->nvals] = value;
- else if (entry->type == XTTYPE_UINT32RC)
- cb->val.u32_range[cb->nvals] = value;
- else if (entry->type == XTTYPE_UINT64RC)
- cb->val.u64_range[cb->nvals] = value;
+ if (entry->type == XTTYPE_UINT8RC) {
+ cb->val.u8_range[i] = value;
+ } else if (entry->type == XTTYPE_UINT16RC) {
+ cb->val.u16_range[i] = value;
+ if (entry->flags & XTOPT_NBO)
+ cb->val.u16_range[i] = htons(cb->val.u16_range[i]);
+ } else if (entry->type == XTTYPE_UINT32RC) {
+ cb->val.u32_range[i] = value;
+ if (entry->flags & XTOPT_NBO)
+ cb->val.u32_range[i] = htonl(cb->val.u32_range[i]);
+ } else if (entry->type == XTTYPE_UINT64RC) {
+ cb->val.u64_range[i] = value;
+ if (entry->flags & XTOPT_NBO)
+ cb->val.u64_range[i] = htonll(cb->val.u64_range[i]);
+ }
}
/**
--
2.43.0
next prev parent reply other threads:[~2023-12-20 16:06 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-20 16:06 [iptables PATCH 00/23] Guided option parser for ebtables Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 01/23] libxtables: xtoptions: Prevent XTOPT_PUT with XTTYPE_HOSTMASK Phil Sutter
2023-12-20 16:06 ` Phil Sutter [this message]
2023-12-20 19:07 ` [iptables PATCH 02/23] libxtables: xtoptions: Support XTOPT_NBO with XTTYPE_UINT* Jan Engelhardt
2023-12-20 21:28 ` Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 03/23] libxtables: xtoptions: Implement XTTYPE_ETHERMACMASK Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 04/23] libxtables: xtoptions: Treat NFPROTO_BRIDGE as IPv4 Phil Sutter
2023-12-20 19:20 ` Jan Engelhardt
2023-12-20 21:35 ` Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 05/23] ebtables: Support for guided option parser Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 06/23] extensions: libebt_*: Drop some needless init callbacks Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 07/23] extensions: libebt_stp: Use guided option parser Phil Sutter
2023-12-20 19:29 ` Jan Engelhardt
2023-12-20 21:47 ` Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 08/23] extensions: libebt_arpreply: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 09/23] extensions: libebt_dnat: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 10/23] extensions: libebt_ip6: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 11/23] extensions: libebt_ip: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 12/23] extensions: libebt_log: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 13/23] extensions: libebt_mark: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 14/23] extensions: libebt_nflog: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 15/23] extensions: libebt_snat: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 16/23] extensions: libebt_redirect: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 17/23] extensions: libebt_802_3: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 18/23] extensions: libebt_vlan: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 19/23] extensions: libebt_arp: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 20/23] extensions: libxt_limit: Use guided option parser for NFPROTO_BRIDGE, too Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 21/23] extensions: libebt_pkttype: Use guided option parser Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 22/23] extensions: libebt_mark_m: " Phil Sutter
2023-12-20 16:06 ` [iptables PATCH 23/23] extensions: libxt_HMARK: Review HMARK_parse() Phil Sutter
2024-01-10 15:09 ` [iptables PATCH 00/23] Guided option parser for ebtables Phil Sutter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231220160636.11778-3-phil@nwl.cc \
--to=phil@nwl.cc \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox