From: Philip Prindeville <philipp_subx@redfish-solutions.com>
To: Patrick McHardy <kaber@trash.net>
Cc: netfilter-devel@vger.kernel.org
Subject: Re: More nf_conntrack_sip questions
Date: Fri, 05 Dec 2008 10:00:45 -0800 [thread overview]
Message-ID: <49396C4D.7020400@redfish-solutions.com> (raw)
In-Reply-To: <493954ED.9070002@trash.net>
Patrick McHardy wrote:
> Philip Prindeville wrote:
>> I did a little investigation into my one-way voice issue, and noticed
>> that if I don't do voice-menus (i.e. where the Asterisk box itself
>> generates the first outbound INVITE, then passes-through the 2nd
>> INVITE once a handset picks up) then I get two-way voice (i.e. with
>> sending the call directly to the phone). (In this topology, my
>> Asterisk box is also my firewall/NATting router...)
>>
>> If I enable the voice menus in the inbound dialplan, however, it can
>> hear the voice menus, but not the called-party when they pick up
>> their phone (extension).
>>
>> So someone (either the SIP conntrack module on the Asterisk border
>> firewall or else the SBC at the ILEC) is failing to look into the 2nd
>> INVITE (i.e. we're not rewriting it properly as it goes by, or the
>> SBC is failing to see it).
>
>
> What module options are you using for the SIP helper and how is call
> setup in asterisk configured (directrtpsetup, canreinvite, ...)?
>
For the PSTN's switch:
pbx*CLI> sip show peer sip_proxy
pbx*CLI>
* Name : sip_proxy
Secret : xxxx
MD5Secret : <Not set>
Context : ctc-incoming
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox :
VM Extension : asterisk
LastMsgsSent : 32767/65535
Call limit : 0
Dynamic : No
Callerid : "" <>
MaxCallBR : 384 kbps
Expire : -1
Insecure : no
Nat : RFC3581
ACL : No
T38 pt UDPTL : No
CanReinvite : Yes
PromiscRedir : No
User=Phone : No
Video Support: No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : No
DTMFmode : rfc2833
LastMsg : 0
ToHost : 66.232.80.9
Addr->IP : 66.232.80.9 Port 5060
Defaddr->IP : 0.0.0.0 Port 0
Def. Username:
SIP Options : (none)
Codecs : 0x6 (gsm|ulaw)
Codec Order : (ulaw:20,gsm:20)
Auto-Framing: No
Status : Unmonitored
Useragent :
Reg. Contact :
pbx*CLI>
For the phone:
pbx*CLI> sip show peer office_1
pbx*CLI>
* Name : office_1
Secret : <Set>
MD5Secret : <Not set>
Context : redfish-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox : 112@redfish,xxxx
VM Extension : voicemail
LastMsgsSent : 0/0
Call limit : 0
Dynamic : Yes
Callerid : "Redfish Solutions" <112>
MaxCallBR : 384 kbps
Expire : 1780
Insecure : no
Nat : Always
ACL : No
T38 pt UDPTL : No
CanReinvite : Yes
PromiscRedir : No
User=Phone : No
Video Support: No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : No
DTMFmode : rfc2833
LastMsg : 0
ToHost :
Addr->IP : 192.168.1.7 Port 5060
Defaddr->IP : 0.0.0.0 Port 5060
Def. Username: office_1
SIP Options : (none)
Codecs : 0x6 (gsm|ulaw)
Codec Order : (ulaw:20,gsm:20)
Auto-Framing: No
Status : OK (9 ms)
Useragent : Linksys/SPA942-5.1.15(a)
Reg. Contact : sip:office_1@192.168.1.7:5060
pbx*CLI>
next prev parent reply other threads:[~2008-12-05 18:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-02 22:36 More nf_conntrack_sip questions Philip Prindeville
2008-12-05 16:21 ` Patrick McHardy
2008-12-05 18:00 ` Philip Prindeville [this message]
2008-12-05 18:07 ` Patrick McHardy
2008-12-05 18:08 ` Patrick McHardy
2008-12-05 18:10 ` Philip Prindeville
2008-12-05 18:13 ` Patrick McHardy
2008-12-05 18:16 ` Philip Prindeville
2008-12-05 18:19 ` Patrick McHardy
2008-12-05 18:32 ` Philip Prindeville
2008-12-05 18:39 ` Patrick McHardy
2008-12-07 0:31 ` Philip Prindeville
2008-12-07 16:06 ` Patrick McHardy
2008-12-08 0:28 ` Philip Prindeville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49396C4D.7020400@redfish-solutions.com \
--to=philipp_subx@redfish-solutions.com \
--cc=kaber@trash.net \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).