From: Philip Prindeville <philipp_subx@redfish-solutions.com>
To: Patrick McHardy <kaber@trash.net>
Cc: netfilter-devel@vger.kernel.org
Subject: Re: More nf_conntrack_sip questions
Date: Fri, 05 Dec 2008 10:10:25 -0800 [thread overview]
Message-ID: <49396E91.1060403@redfish-solutions.com> (raw)
In-Reply-To: <49396DDD.9080308@trash.net>
Patrick McHardy wrote:
> Philip Prindeville wrote:
>> Patrick McHardy wrote:
>>> Philip Prindeville wrote:
>>>> I did a little investigation into my one-way voice issue, and
>>>> noticed that if I don't do voice-menus (i.e. where the Asterisk box
>>>> itself generates the first outbound INVITE, then passes-through the
>>>> 2nd INVITE once a handset picks up) then I get two-way voice (i.e.
>>>> with sending the call directly to the phone). (In this topology,
>>>> my Asterisk box is also my firewall/NATting router...)
>>>>
>>>> If I enable the voice menus in the inbound dialplan, however, it
>>>> can hear the voice menus, but not the called-party when they pick
>>>> up their phone (extension).
>>>>
>>>> So someone (either the SIP conntrack module on the Asterisk border
>>>> firewall or else the SBC at the ILEC) is failing to look into the
>>>> 2nd INVITE (i.e. we're not rewriting it properly as it goes by, or
>>>> the SBC is failing to see it).
>>>
>>>
>>> What module options are you using for the SIP helper and how is call
>>> setup in asterisk configured (directrtpsetup, canreinvite, ...)?
>>>
>>
>> For the PSTN's switch:
>>
>> CanReinvite : Yes
>
> I vaguely recall some problem in the implementation of this feature,
> something with missing bridging of the RTP streams that was still
> necessary under some circumstances. Might be worth to try turning
> it off.
>
> What about the module options?
pbx*CLI> sip show settings
pbx*CLI>
Global Settings:
----------------
SIP Port: 5060
Bindaddress: 0.0.0.0
Videosupport: No
AutoCreatePeer: No
Allow unknown access: Yes
Allow subscriptions: Yes
Allow overlap dialing: No
Promsic. redir: No
SIP domain support: Yes
Call to non-local dom.: Yes
URI user is phone no: No
Our auth realm asterisk
Realm. auth: No
Always auth rejects: No
Call limit peers only: No
Direct RTP setup: No
User Agent: Asterisk PBX
MWI checking interval: 10 secs
Reg. context: (not set)
Caller ID: asterisk
From: Domain:
Record SIP history: Off
Call Events: Off
IP ToS SIP: CS3
IP ToS RTP audio: EF
IP ToS RTP video: AF41
T38 fax pt UDPTL: No
RFC2833 Compensation: No
SIP realtime: Disabled
Global Signalling Settings:
---------------------------
Codecs: 0x6 (gsm|ulaw)
Codec Order: ulaw:20,gsm:20
T1 minimum: 100
Relax DTMF: No
Compact SIP headers: No
RTP Keepalive: 0 (Disabled)
RTP Timeout: 0 (Disabled)
RTP Hold Timeout: 0 (Disabled)
MWI NOTIFY mime type: application/simple-message-summary
DNS SRV lookup: Yes
Pedantic SIP support: No
Reg. min duration 60 secs
Reg. max duration: 3600 secs
Reg. default duration: 120 secs
Outbound reg. timeout: 20 secs
Outbound reg. attempts: 0
Notify ringing state: Yes
Notify hold state: No
SIP Transfer mode: open
Max Call Bitrate: 384 kbps
Auto-Framing: No
Default Settings:
-----------------
Context: INVALID
Nat: RFC3581
DTMF: rfc2833
Qualify: 0
Use ClientCode: No
Progress inband: Never
Language: (Defaults to English)
MOH Interpret: default
MOH Suggest:
Voice Mail Extension: asterisk
----
pbx*CLI>
next prev parent reply other threads:[~2008-12-05 18:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-02 22:36 More nf_conntrack_sip questions Philip Prindeville
2008-12-05 16:21 ` Patrick McHardy
2008-12-05 18:00 ` Philip Prindeville
2008-12-05 18:07 ` Patrick McHardy
2008-12-05 18:08 ` Patrick McHardy
2008-12-05 18:10 ` Philip Prindeville [this message]
2008-12-05 18:13 ` Patrick McHardy
2008-12-05 18:16 ` Philip Prindeville
2008-12-05 18:19 ` Patrick McHardy
2008-12-05 18:32 ` Philip Prindeville
2008-12-05 18:39 ` Patrick McHardy
2008-12-07 0:31 ` Philip Prindeville
2008-12-07 16:06 ` Patrick McHardy
2008-12-08 0:28 ` Philip Prindeville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49396E91.1060403@redfish-solutions.com \
--to=philipp_subx@redfish-solutions.com \
--cc=kaber@trash.net \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).