From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick McHardy Subject: Re: [PATCH v2 resend] netfilter: ipt_REJECT can't send TCP reset Date: Thu, 16 Sep 2010 19:50:33 +0200 Message-ID: <4C9258E9.2050502@trash.net> References: <1282029970-3111-1-git-send-email-xiaosuo@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Cc: "David S. Miller" , Alexey Kuznetsov , "Pekka Savola (ipv6)" , James Morris , Hideaki YOSHIFUJI , netfilter-devel@vger.kernel.org, netdev@vger.kernel.org To: Changli Gao Return-path: In-Reply-To: <1282029970-3111-1-git-send-email-xiaosuo@gmail.com> Sender: netdev-owner@vger.kernel.org List-Id: netfilter-devel.vger.kernel.org On 17.08.2010 09:26, Changli Gao wrote: > ip_route_me_harder can't create the route cache when the outdev is the same > with the indev for the skbs whichout a valid protocol set. > > __mkroute_input functions has this check: > 1998 if (skb->protocol != htons(ETH_P_IP)) { > 1999 /* Not IP (i.e. ARP). Do not create route, if it is > 2000 * invalid for proxy arp. DNAT routes are always valid. > 2001 * > 2002 * Proxy arp feature have been extended to allow, ARP > 2003 * replies back to the same interface, to support > 2004 * Private VLAN switch technologies. See arp.c. > 2005 */ > 2006 if (out_dev == in_dev && > 2007 IN_DEV_PROXY_ARP_PVLAN(in_dev) == 0) { > 2008 err = -EINVAL; > 2009 goto cleanup; > 2010 } > 2011 } > > This patch gives the new skb a valid protocol to bypass this check. In order > to make ipt_REJECT work with bridges, you also need to enable ip_forward. > > This patch also fixes a regression. When we used skb_copy_expand(), we > didn't have this issue stated above, as the protocol was properly set. Applied to nf-2.6.git, thanks.